| |
| /* pngvalid.c - validate libpng by constructing then reading png files. |
| * |
| * Last changed in libpng 1.5.0 [July 5, 2010] |
| * Copyright (c) 2010-2010 Glenn Randers-Pehrson |
| * |
| * This code is released under the libpng license. |
| * For conditions of distribution and use, see the disclaimer |
| * and license in png.h |
| * |
| * NOTES: |
| * This is a C program that is intended to be linked against libpng. It |
| * generates bitmaps internally, stores them as PNG files (using the |
| * sequential write code) then reads them back (using the sequential |
| * read code) and validates that the result has the correct data. |
| * |
| * The program can be modified and extended to test the correctness of |
| * transformations performed by libpng. |
| */ |
| |
| #include "png.h" |
| #include "zlib.h" /* For crc32 */ |
| |
| #include <stdlib.h> /* For malloc */ |
| #include <string.h> /* For memcpy, memset */ |
| #include <setjmp.h> /* For jmp_buf, setjmp, longjmp */ |
| #include <math.h> /* For floor */ |
| |
| /* Unused formal parameter errors are removed using the following macro which is |
| * expected to have no bad effects on performance. |
| */ |
| #ifndef UNUSED |
| #define UNUSED(param) param = param; |
| #endif |
| |
| /******************************* ERROR UTILITIES ******************************/ |
| static size_t safecat(char *buffer, size_t bufsize, size_t pos, |
| PNG_CONST char *cat) |
| { |
| while (pos < bufsize && cat != NULL && *cat != 0) buffer[pos++] = *cat++; |
| if (pos >= bufsize) pos = bufsize-1; |
| buffer[pos] = 0; |
| return pos; |
| } |
| |
| static size_t safecatn(char *buffer, size_t bufsize, size_t pos, int n) |
| { |
| char number[64]; |
| sprintf(number, "%d", n); |
| return safecat(buffer, bufsize, pos, number); |
| } |
| |
| static size_t safecatd(char *buffer, size_t bufsize, size_t pos, double d, |
| int precision) |
| { |
| char number[64]; |
| sprintf(number, "%.*f", precision, d); |
| return safecat(buffer, bufsize, pos, number); |
| } |
| |
| static PNG_CONST char invalid[] = "invalid"; |
| static PNG_CONST char sep[] = ": "; |
| |
| /* NOTE: this is indexed by ln2(bit_depth)! */ |
| static PNG_CONST char *bit_depths[8] = |
| { |
| "1", "2", "4", "8", "16", invalid, invalid, invalid |
| }; |
| |
| static PNG_CONST char *colour_types[8] = |
| { |
| "greyscale", invalid, "truecolour", "indexed-colour", |
| "greyscale with alpha", invalid, "truecolour with alpha", invalid |
| }; |
| |
| /* Convenience API to list valid formats: */ |
| static int |
| next_format(png_bytep colour_type, png_bytep bit_depth) |
| { |
| if (*bit_depth == 0) |
| { |
| *colour_type = 0, *bit_depth = 1; |
| return 1; |
| } |
| else switch (*colour_type) |
| { |
| case 0: |
| *bit_depth <<= 1; |
| if (*bit_depth <= 16) return 1; |
| *colour_type = 2; |
| *bit_depth = 8; |
| return 1; |
| case 2: |
| *bit_depth <<= 1; |
| if (*bit_depth <= 16) return 1; |
| *colour_type = 3; |
| *bit_depth = 1; |
| return 1; |
| case 3: |
| *bit_depth <<= 1; |
| if (*bit_depth <= 8) return 1; |
| *colour_type = 4; |
| *bit_depth = 8; |
| return 1; |
| case 4: |
| *bit_depth <<= 1; |
| if (*bit_depth <= 16) return 1; |
| *colour_type = 6; |
| *bit_depth = 8; |
| return 1; |
| case 6: |
| *bit_depth <<= 1; |
| if (*bit_depth <= 16) return 1; |
| break; |
| } |
| |
| /* Here at the end. */ |
| return 0; |
| } |
| |
| static unsigned int |
| sample(png_byte *row, png_byte colour_type, png_byte bit_depth, png_uint_32 x, |
| unsigned int sample) |
| { |
| png_uint_32 index, result; |
| |
| /* Find a sample index for the desired sample: */ |
| x *= bit_depth; |
| index = x; |
| if ((colour_type & 1) == 0) /* !palette */ |
| { |
| if (colour_type & 2) |
| index *= 3, index += sample; /* Colour channels; select one */ |
| if (colour_type & 4) index += x; /* Alpha channel */ |
| } |
| |
| /* Return the sample from the row as an integer. */ |
| row += index >> 3; |
| result = *row; |
| if (bit_depth == 8) |
| return result; |
| else if (bit_depth > 8) |
| return (result << 8) + *++row; |
| /* Less than 8 bits per sample. */ |
| index &= 7; |
| return (result >> (8-index-bit_depth)) & ((1U<<bit_depth)-1); |
| } |
| |
| /*************************** BASIC PNG FILE WRITING ***************************/ |
| /* A png_store takes data from the sequential writer or provides data |
| * to the sequential reader. It can also store the result of a PNG |
| * write for later retrieval. |
| */ |
| #define STORE_BUFFER_SIZE 500 /* arbitrary */ |
| typedef struct png_store_buffer |
| { |
| struct png_store_buffer* prev; /* NOTE: stored in reverse order */ |
| png_byte buffer[STORE_BUFFER_SIZE]; |
| } png_store_buffer; |
| |
| typedef struct png_store_file |
| { |
| struct png_store_file* next; /* as many as you like... */ |
| char name[64]; /* textual name */ |
| png_uint_32 id; /* as a convenience to users */ |
| png_size_t datacount; /* In this (the last) buffer */ |
| png_store_buffer data; /* Last buffer in file */ |
| } png_store_file; |
| |
| #define STORE_ERROR 0x345 |
| typedef struct png_store |
| { |
| jmp_buf jmpbuf; |
| int verbose; |
| int nerrors; |
| int nwarnings; |
| int treat_warnings_as_errors; |
| char test[64]; /* Name of test */ |
| char error[128]; |
| /* Read fields */ |
| png_structp pread; /* Used to read a saved file */ |
| png_infop piread; |
| png_store_file* current; /* Set when reading */ |
| png_store_buffer* next; /* Set when reading */ |
| png_size_t readpos; /* Position in *next */ |
| /* Write fields */ |
| png_store_file* saved; |
| png_structp pwrite; /* Used when writing a new file */ |
| png_infop piwrite; |
| png_size_t writepos; /* Position in .new */ |
| char wname[64];/* Name of file being written */ |
| png_store_buffer new; /* The end of the new PNG file being written. */ |
| } png_store; |
| |
| /* Initialization and cleanup */ |
| static void |
| store_init(png_store* ps) |
| { |
| memset(ps, 0, sizeof *ps); |
| ps->verbose = 0; |
| ps->nerrors = ps->nwarnings = 0; |
| ps->treat_warnings_as_errors = 0; |
| ps->pread = NULL; |
| ps->piread = NULL; |
| ps->saved = ps->current = NULL; |
| ps->next = NULL; |
| ps->readpos = 0; |
| ps->pwrite = NULL; |
| ps->piwrite = NULL; |
| ps->writepos = 0; |
| ps->new.prev = NULL; |
| } |
| |
| static void |
| store_freebuffer(png_store_buffer* psb) |
| { |
| if (psb->prev) |
| { |
| store_freebuffer(psb->prev); |
| free(psb->prev); |
| psb->prev = NULL; |
| } |
| } |
| |
| static void |
| store_freenew(png_store *ps) |
| { |
| store_freebuffer(&ps->new); |
| ps->writepos = 0; |
| } |
| |
| static void |
| store_storenew(png_store *ps) |
| { |
| png_store_buffer *pb; |
| if (ps->writepos != STORE_BUFFER_SIZE) |
| png_error(ps->pwrite, "invalid store call"); |
| pb = malloc(sizeof *pb); |
| if (pb == NULL) |
| png_error(ps->pwrite, "store new: OOM"); |
| *pb = ps->new; |
| ps->new.prev = pb; |
| ps->writepos = 0; |
| } |
| |
| /* Currently unused: */ |
| #if 0 |
| static void |
| store_freefile(png_store_file *pf) |
| { |
| if (pf->next) |
| store_freefile(pf->next); |
| pf->next = NULL; |
| store_freebuffer(&pf->data); |
| pf->datacount = 0; |
| free(pf); |
| } |
| #endif |
| |
| /* Main interface to file storeage, after writing a new PNG file (see the API |
| * below) call store_storefile to store the result with the given name and id. |
| */ |
| static void |
| store_storefile(png_store *ps, png_uint_32 id) |
| { |
| png_store_file *pf = malloc(sizeof *pf); |
| if (pf == NULL) |
| png_error(ps->pwrite, "storefile: OOM"); |
| safecat(pf->name, sizeof pf->name, 0, ps->wname); |
| pf->id = id; |
| pf->data = ps->new; |
| pf->datacount = ps->writepos; |
| ps->new.prev = NULL; |
| ps->writepos = 0; |
| |
| /* And save it. */ |
| pf->next = ps->saved; |
| ps->saved = pf; |
| } |
| |
| /* Generate an error message (in the given buffer) */ |
| static size_t |
| store_message(png_structp pp, char *buffer, size_t bufsize, PNG_CONST char *msg) |
| { |
| size_t pos = 0; |
| png_store *ps = png_get_error_ptr(pp); |
| |
| if (pp == ps->pread) |
| { |
| /* Reading a file */ |
| pos = safecat(buffer, bufsize, pos, "read: "); |
| if (ps->current != NULL) |
| { |
| pos = safecat(buffer, bufsize, pos, ps->current->name); |
| pos = safecat(buffer, bufsize, pos, sep); |
| } |
| } |
| else if (pp == ps->pwrite) |
| { |
| /* Writing a file */ |
| pos = safecat(buffer, bufsize, pos, "write: "); |
| pos = safecat(buffer, bufsize, pos, ps->wname); |
| } |
| else |
| { |
| /* Neither reading nor writing */ |
| pos = safecat(buffer, bufsize, pos, "pngvalid: "); |
| } |
| |
| pos = safecat(buffer, bufsize, pos, ps->test); |
| pos = safecat(buffer, bufsize, pos, " "); |
| pos = safecat(buffer, bufsize, pos, msg); |
| return pos; |
| } |
| |
| /* Functions to use as PNG callbacks. */ |
| static void |
| store_error(png_structp pp, png_const_charp message) /* PNG_NORETURN */ |
| { |
| png_store *ps = png_get_error_ptr(pp); |
| char buffer[256]; |
| |
| store_message(pp, buffer, sizeof buffer, message); |
| |
| if (ps->nerrors++ == 0) |
| safecat(ps->error, sizeof ps->error, 0, buffer); |
| |
| if (ps->verbose) |
| fprintf(stderr, "error: %s\n", buffer); |
| |
| /* The longjmp argument is because, by UTSL, libpng calls longjmp with 1, and |
| * libpng is *not* expected to ever call longjmp, so this is a sanity |
| * check. The code below ensures that libpng gets a copy of our jmp_buf. |
| */ |
| longjmp(ps->jmpbuf, STORE_ERROR); |
| } |
| |
| static void |
| store_warning(png_structp pp, png_const_charp message) |
| { |
| png_store *ps = png_get_error_ptr(pp); |
| char buffer[256]; |
| |
| store_message(pp, buffer, sizeof buffer, message); |
| |
| if (ps->nwarnings++ == 0 && ps->nerrors == 0) |
| safecat(ps->error, sizeof ps->error, 0, buffer); |
| |
| if (ps->verbose) |
| fprintf(stderr, "warning: %s\n", buffer); |
| } |
| |
| static void |
| store_write(png_structp pp, png_bytep pb, png_size_t st) |
| { |
| png_store *ps = png_get_io_ptr(pp); |
| if (ps->pwrite != pp) |
| png_error(pp, "store state damaged"); |
| while (st > 0) |
| { |
| size_t cb; |
| |
| if (ps->writepos >= STORE_BUFFER_SIZE) |
| store_storenew(ps); |
| |
| cb = st; |
| if (cb > STORE_BUFFER_SIZE - ps->writepos) |
| cb = STORE_BUFFER_SIZE - ps->writepos; |
| memcpy(ps->new.buffer + ps->writepos, pb, cb); |
| pb += cb; |
| st -= cb; |
| ps->writepos += cb; |
| } |
| } |
| |
| static void |
| store_flush(png_structp pp) |
| { |
| pp = pp; |
| /*DOES NOTHING*/ |
| } |
| |
| static size_t |
| store_read_buffer_size(png_store *ps) |
| { |
| /* Return the bytes available for read in the current buffer. */ |
| if (ps->next != &ps->current->data) |
| return STORE_BUFFER_SIZE; |
| |
| return ps->current->datacount; |
| } |
| |
| static int |
| store_read_buffer_next(png_store *ps) |
| { |
| png_store_buffer *pbOld = ps->next; |
| png_store_buffer *pbNew = &ps->current->data; |
| if (pbOld != pbNew) |
| { |
| while (pbNew != NULL && pbNew->prev != pbOld) |
| pbNew = pbNew->prev; |
| if (pbNew != NULL) |
| { |
| ps->next = pbNew; |
| ps->readpos = 0; |
| return 1; |
| } |
| |
| png_error(ps->pread, "buffer lost"); |
| } |
| |
| return 0; /* EOF or error */ |
| } |
| |
| static void |
| store_read(png_structp pp, png_bytep pb, png_size_t st) |
| { |
| png_store *ps = png_get_io_ptr(pp); |
| if (ps->pread != pp || ps->current == NULL || ps->next == NULL) |
| png_error(pp, "store state damaged"); |
| while (st > 0) |
| { |
| size_t cbAvail = store_read_buffer_size(ps) - ps->readpos; |
| |
| if (cbAvail > 0) |
| { |
| if (cbAvail > st) cbAvail = st; |
| memcpy(pb, ps->next->buffer + ps->readpos, cbAvail); |
| st -= cbAvail; |
| pb += cbAvail; |
| ps->readpos += cbAvail; |
| } |
| else if (!store_read_buffer_next(ps)) |
| png_error(pp, "read beyond end of file"); |
| } |
| } |
| |
| /* Setup functions. */ |
| /* Cleanup when aborting a write or after storing the new file. */ |
| static void |
| store_write_reset(png_store *ps) |
| { |
| if (ps->pwrite != NULL) |
| { |
| png_destroy_write_struct(&ps->pwrite, &ps->piwrite); |
| ps->pwrite = NULL; |
| ps->piwrite = NULL; |
| } |
| |
| store_freenew(ps); |
| } |
| |
| /* The following is the main write function, it returns a png_struct and, |
| * optionally, a png)info suitable for writiing a new PNG file. Use |
| * store_storefile above to record this file after it has been written. The |
| * returned libpng structures as destroyed by store_write_reset above. |
| */ |
| static png_structp |
| set_store_for_write(png_store *ps, png_infopp ppi, |
| PNG_CONST char * volatile name) |
| { |
| if (setjmp(ps->jmpbuf) != 0) |
| return NULL; |
| |
| if (ps->pwrite != NULL) |
| png_error(ps->pwrite, "store already in use"); |
| |
| store_write_reset(ps); |
| safecat(ps->wname, sizeof ps->wname, 0, name); |
| |
| ps->pwrite = png_create_write_struct(PNG_LIBPNG_VER_STRING, ps, store_error, |
| store_warning); |
| png_set_write_fn(ps->pwrite, ps, store_write, store_flush); |
| |
| if (ppi != NULL) |
| *ppi = ps->piwrite = png_create_info_struct(ps->pwrite); |
| |
| return ps->pwrite; |
| } |
| |
| /* Cleanup when finished reading (either due to error or in the success case. ) |
| */ |
| static void |
| store_read_reset(png_store *ps) |
| { |
| if (ps->pread != NULL) |
| { |
| png_destroy_read_struct(&ps->pread, &ps->piread, NULL); |
| ps->pread = NULL; |
| ps->piread = NULL; |
| } |
| |
| ps->current = NULL; |
| ps->next = NULL; |
| ps->readpos = 0; |
| } |
| |
| static void |
| store_read_set(png_store *ps, png_uint_32 id) |
| { |
| png_store_file *pf = ps->saved; |
| |
| while (pf != NULL) |
| { |
| if (pf->id == id) |
| { |
| ps->current = pf; |
| ps->next = NULL; |
| store_read_buffer_next(ps); |
| return; |
| } |
| |
| pf = pf->next; |
| } |
| |
| png_error(ps->pread, "unable to find file to read"); |
| } |
| |
| /* The main interface for reading a saved file - pass the id number of the file |
| * to retrieve. Ids must be unique or the earlier file will be hidden. The API |
| * returns a png_struct and, optionally, a png_info. Both of these will be |
| * destroyed by store_read_reset above. |
| */ |
| static png_structp |
| set_store_for_read(png_store *ps, png_infopp ppi, png_uint_32 id, |
| PNG_CONST char *name) |
| { |
| safecat(ps->test, sizeof ps->test, 0, name); |
| |
| if (setjmp(ps->jmpbuf) != 0) |
| return NULL; |
| |
| if (ps->pread != NULL) |
| png_error(ps->pread, "store already in use"); |
| |
| store_read_reset(ps); |
| |
| ps->pread = png_create_read_struct(PNG_LIBPNG_VER_STRING, ps, store_error, |
| store_warning); |
| store_read_set(ps, id); |
| png_set_read_fn(ps->pread, ps, store_read); |
| |
| if (ppi != NULL) |
| *ppi = ps->piread = png_create_info_struct(ps->pread); |
| |
| return ps->pread; |
| } |
| |
| /*********************** PNG FILE MODIFICATION ON READ ************************/ |
| /* Files may be modified on read. The following structure contains a complete |
| * png_store together with extra members to handle modification and a special |
| * read callback for libpng. To use this the 'modifications' field must be set |
| * to a list of png_modification structures that actually perform the |
| * modification, otherwise a png_modifier is functionally equivalent to a |
| * png_store. There is a special read function, set_modifier_for_read, which |
| * replaces set_store_for_read. |
| */ |
| typedef struct png_modifier |
| { |
| png_store this; /* I am a png_store */ |
| struct png_modification *modifications; /* Changes to make */ |
| enum modifier_state |
| { |
| modifier_start, /* Initial value */ |
| modifier_signature, /* Have a signature */ |
| modifier_IHDR /* Have an IHDR */ |
| } state; /* My state */ |
| |
| /* Information from IHDR: */ |
| png_byte bit_depth; /* From IHDR */ |
| png_byte colour_type; /* From IHDR */ |
| |
| /* While handling PLTE, IDAT and IEND these chunks may be pended to allow |
| * other chunks to be inserted. |
| */ |
| png_uint_32 pending_len; |
| png_uint_32 pending_chunk; |
| |
| /* Test values */ |
| double *gammas; |
| unsigned int ngammas; |
| |
| /* Lowest sbit to test (libpng fails for sbit < 8) */ |
| png_byte sbitlow; |
| |
| /* Error control - these are the limits on errors accepted by the gamma tests |
| * below. |
| */ |
| double maxout8; /* Maximum output value error */ |
| double maxabs8; /* Absolute sample error 0..1 */ |
| double maxpc8; /* Percentage sample error 0..100% */ |
| double maxout16; /* Maximum output value error */ |
| double maxabs16; /* Absolute sample error 0..1 */ |
| double maxpc16; /* Percentage sample error 0..100% */ |
| |
| /* Logged 8 and 16 bit errors ('output' values): */ |
| double error_gray_2; |
| double error_gray_4; |
| double error_gray_8; |
| double error_gray_16; |
| double error_color_8; |
| double error_color_16; |
| |
| /* Flags: */ |
| /* When to use the use_input_precision option: */ |
| unsigned int use_input_precision :1; |
| unsigned int use_input_precision_sbit :1; |
| unsigned int use_input_precision_16to8 :1; |
| unsigned int log :1; /* Log max error */ |
| |
| /* Buffer information, the buffer size limits the size of the chunks that can |
| * be modified - they must fit (including header and CRC) into the buffer! |
| */ |
| size_t flush; /* Count of bytes to flush */ |
| size_t buffer_count; /* Bytes in buffer */ |
| size_t buffer_position; /* Position in buffer */ |
| png_byte buffer[1024]; |
| } png_modifier; |
| |
| static double abserr(png_modifier *pm, png_byte bit_depth) |
| { |
| return bit_depth == 16 ? pm->maxabs16 : pm->maxabs8; |
| } |
| |
| static double pcerr(png_modifier *pm, png_byte bit_depth) |
| { |
| return (bit_depth == 16 ? pm->maxpc16 : pm->maxpc8) * .01; |
| } |
| |
| static double outerr(png_modifier *pm, png_byte bit_depth) |
| { |
| /* There is a serious error in the 2 and 4 bit grayscale transform because |
| * the gamma table value (8 bits) is simply shifted, not rouned, so the |
| * error in 4 bit greyscale gamma is up to the value below. This is a hack |
| * to allow pngvalid to succeed: |
| */ |
| if (bit_depth == 2) return .73182-.5; |
| if (bit_depth == 4) return .90644-.5; |
| if (bit_depth == 16) return pm->maxout16; |
| return pm->maxout8; |
| } |
| |
| /* This returns true if the test should be stopped now because it has already |
| * failed and it is running silently. |
| */ |
| static int fail(png_modifier *pm) |
| { |
| return !pm->log && !pm->this.verbose && (pm->this.nerrors > 0 || |
| (pm->this.treat_warnings_as_errors && pm->this.nwarnings > 0)); |
| } |
| |
| static void |
| modifier_init(png_modifier *pm) |
| { |
| memset(pm, 0, sizeof *pm); |
| store_init(&pm->this); |
| pm->modifications = NULL; |
| pm->state = modifier_start; |
| pm->sbitlow = 1U; |
| pm->maxout8 = pm->maxpc8 = pm->maxabs8 = 0; |
| pm->maxout16 = pm->maxpc16 = pm->maxabs16 = 0; |
| pm->error_gray_2 = pm->error_gray_4 = pm->error_gray_8 = 0; |
| pm->error_gray_16 = pm->error_color_8 = pm->error_color_16 = 0; |
| pm->use_input_precision = 0; |
| pm->use_input_precision_sbit = 0; |
| pm->use_input_precision_16to8 = 0; |
| pm->log = 0; |
| |
| /* Rely on the memset for all the other fields - there are no pointers */ |
| } |
| |
| /* One modification strucutre must be provided for each chunk to be modified (in |
| * fact more than one can be provided if multiple separate changes are desired |
| * for a single chunk.) Modifications include adding a new chunk when a |
| * suitable chunk does not exist. |
| * |
| * The caller of modify_fn will reset the CRC of the chunk and record 'modified' |
| * or 'added' as appropriate if the modify_fn returns 1 (true). If the |
| * modify_fn is NULL the chunk is simply removed. |
| */ |
| typedef struct png_modification |
| { |
| struct png_modification *next; |
| png_uint_32 chunk; |
| /* If the following is NULL all matching chunks will be removed: */ |
| int (*modify_fn)(png_structp pp, struct png_modifier *pm, |
| struct png_modification *me, int add); |
| /* If the following is set to PLTE, IDAT or IEND and the chunk has not been |
| * found and modified (and there is a modify_fn) the modify_fn will be called |
| * to add the chunk before the relevant chunk. |
| */ |
| png_uint_32 add; |
| int modified :1; /* Chunk was modified */ |
| int added :1; /* Chunk was added */ |
| int removed :1; /* Chunk was removed */ |
| } png_modification; |
| |
| static void modification_reset(png_modification *pmm) |
| { |
| if (pmm != NULL) |
| { |
| pmm->modified = 0; |
| pmm->added = 0; |
| pmm->removed = 0; |
| modification_reset(pmm->next); |
| } |
| } |
| |
| static void |
| modification_init(png_modification *pmm) |
| { |
| memset(pmm, 0, sizeof *pmm); |
| pmm->next = NULL; |
| pmm->chunk = 0; |
| pmm->modify_fn = NULL; |
| pmm->add = 0; |
| modification_reset(pmm); |
| } |
| |
| static void |
| modifier_reset(png_modifier *pm) |
| { |
| store_read_reset(&pm->this); |
| pm->modifications = NULL; |
| pm->state = modifier_start; |
| pm->bit_depth = pm->colour_type = 0; |
| pm->pending_len = pm->pending_chunk = 0; |
| pm->flush = pm->buffer_count = pm->buffer_position = 0; |
| } |
| |
| /* Convenience macros. */ |
| #define CHUNK(a,b,c,d) (((a)<<24)+((b)<<16)+((c)<<8)+(d)) |
| #define CHUNK_IHDR CHUNK(73,72,68,82) |
| #define CHUNK_PLTE CHUNK(80,76,84,69) |
| #define CHUNK_IDAT CHUNK(73,68,65,84) |
| #define CHUNK_IEND CHUNK(73,69,78,68) |
| #define CHUNK_cHRM CHUNK(99,72,82,77) |
| #define CHUNK_gAMA CHUNK(103,65,77,65) |
| #define CHUNK_sBIT CHUNK(115,66,73,84) |
| #define CHUNK_sRGB CHUNK(115,82,71,66) |
| |
| /* The guts of modification are performed during a read. */ |
| static void |
| modifier_crc(png_bytep buffer) |
| { |
| /* Recalculate the chunk CRC - a complete chunk must be in |
| * the buffer, at the start. |
| */ |
| uInt datalen = png_get_uint_32(buffer); |
| png_save_uint_32(buffer+datalen+8, crc32(0L, buffer+4, datalen+4)); |
| } |
| |
| static void |
| modifier_setbuffer(png_modifier *pm) |
| { |
| modifier_crc(pm->buffer); |
| pm->buffer_count = png_get_uint_32(pm->buffer)+12; |
| pm->buffer_position = 0; |
| } |
| |
| static void |
| modifier_read(png_structp pp, png_bytep pb, png_size_t st) |
| { |
| png_modifier *pm = png_get_io_ptr(pp); |
| |
| while (st > 0) |
| { |
| size_t cb; |
| png_uint_32 len, chunk; |
| png_modification *mod; |
| |
| if (pm->buffer_position >= pm->buffer_count) switch (pm->state) |
| { |
| static png_byte sign[8] = { 137, 80, 78, 71, 13, 10, 26, 10 }; |
| case modifier_start: |
| store_read(pp, pm->buffer, 8); /* size of signature. */ |
| pm->buffer_count = 8; |
| pm->buffer_position = 0; |
| |
| if (memcmp(pm->buffer, sign, 8) != 0) |
| png_error(pp, "invalid PNG file signature"); |
| pm->state = modifier_signature; |
| break; |
| |
| case modifier_signature: |
| store_read(pp, pm->buffer, 13+12); /* size of IHDR */ |
| pm->buffer_count = 13+12; |
| pm->buffer_position = 0; |
| |
| if (png_get_uint_32(pm->buffer) != 13 || |
| png_get_uint_32(pm->buffer+4) != CHUNK_IHDR) |
| png_error(pp, "invalid IHDR"); |
| |
| /* Check the list of modifiers for modifications to the IHDR. */ |
| mod = pm->modifications; |
| while (mod != NULL) |
| { |
| if (mod->chunk == CHUNK_IHDR && mod->modify_fn && |
| (*mod->modify_fn)(pp, pm, mod, 0)) |
| { |
| mod->modified = 1; |
| modifier_setbuffer(pm); |
| } |
| |
| /* Ignore removal or add if IHDR! */ |
| mod = mod->next; |
| } |
| |
| /* Cache information from the IHDR (the modified one.) */ |
| pm->bit_depth = pm->buffer[8+8]; |
| pm->colour_type = pm->buffer[8+8+1]; |
| |
| pm->state = modifier_IHDR; |
| pm->flush = 0; |
| break; |
| |
| case modifier_IHDR: |
| default: |
| /* Read a new chunk and process it until we see PLTE, IDAT or |
| * IEND. 'flush' indicates that there is still some data to |
| * output from the preceding chunk. |
| */ |
| if ((cb = pm->flush) > 0) |
| { |
| if (cb > st) cb = st; |
| pm->flush -= cb; |
| store_read(pp, pb, cb); |
| pb += cb; |
| st -= cb; |
| if (st <= 0) return; |
| } |
| |
| /* No more bytes to flush, read a header, or handle a pending |
| * chunk. |
| */ |
| if (pm->pending_chunk != 0) |
| { |
| png_save_uint_32(pm->buffer, pm->pending_len); |
| png_save_uint_32(pm->buffer+4, pm->pending_chunk); |
| pm->pending_len = 0; |
| pm->pending_chunk = 0; |
| } |
| else |
| store_read(pp, pm->buffer, 8); |
| |
| pm->buffer_count = 8; |
| pm->buffer_position = 0; |
| |
| /* Check for something to modify or a terminator chunk. */ |
| len = png_get_uint_32(pm->buffer); |
| chunk = png_get_uint_32(pm->buffer+4); |
| |
| /* Terminators first, they may have to be delayed for added |
| * chunks |
| */ |
| if (chunk == CHUNK_PLTE || chunk == CHUNK_IDAT || chunk == CHUNK_IEND) |
| { |
| mod = pm->modifications; |
| |
| while (mod != NULL) |
| { |
| if ((mod->add == chunk || |
| (mod->add == CHUNK_PLTE && chunk == CHUNK_IDAT)) && |
| mod->modify_fn != NULL && !mod->modified && !mod->added) |
| { |
| /* Regardless of what the modify function does do not run this |
| * again. |
| */ |
| mod->added = 1; |
| |
| if ((*mod->modify_fn)(pp, pm, mod, 1/*add*/)) |
| { |
| /* Reset the CRC on a new chunk */ |
| if (pm->buffer_count > 0) |
| modifier_setbuffer(pm); |
| else |
| { |
| pm->buffer_position = 0; |
| mod->removed = 1; |
| } |
| |
| /* The buffer has been filled with something (we assume) so |
| * output this. Pend the current chunk. |
| */ |
| pm->pending_len = len; |
| pm->pending_chunk = chunk; |
| break; /* out of while */ |
| } |
| } |
| |
| mod = mod->next; |
| } |
| |
| /* Don't do any further processing if the buffer was modified - |
| * otherwise the code will end up modifying a chunk that was just |
| * added. |
| */ |
| if (mod != NULL) |
| break; /* out of switch */ |
| } |
| |
| /* If we get to here then this chunk may need to be modified. To do |
| * this is must be less than 1024 bytes in total size, otherwise |
| * it just gets flushed. |
| */ |
| if (len+12 <= sizeof pm->buffer) |
| { |
| store_read(pp, pm->buffer+pm->buffer_count, |
| len+12-pm->buffer_count); |
| pm->buffer_count = len+12; |
| |
| /* Check for a modification, else leave it be. */ |
| mod = pm->modifications; |
| while (mod != NULL) |
| { |
| if (mod->chunk == chunk) |
| { |
| if (mod->modify_fn == NULL) |
| { |
| /* Remove this chunk */ |
| pm->buffer_count = pm->buffer_position = 0; |
| mod->removed = 1; |
| break; /* Terminate the while loop */ |
| } |
| else if ((*mod->modify_fn)(pp, pm, mod, 0)) |
| { |
| mod->modified = 1; |
| /* The chunk may have been removed: */ |
| if (pm->buffer_count == 0) |
| { |
| pm->buffer_position = 0; |
| break; |
| } |
| modifier_setbuffer(pm); |
| } |
| } |
| |
| mod = mod->next; |
| } |
| } |
| else |
| pm->flush = len+12 - pm->buffer_count; /* data + crc */ |
| |
| /* Take the data from the buffer (if there is any). */ |
| break; |
| } |
| |
| /* Here to read from the modifier buffer (not directly from |
| * the store, as in the flush case above.) |
| */ |
| cb = pm->buffer_count - pm->buffer_position; |
| if (cb > st) cb = st; |
| memcpy(pb, pm->buffer + pm->buffer_position, cb); |
| st -= cb; |
| pb += cb; |
| pm->buffer_position += cb; |
| } |
| } |
| |
| /* Set up a modifier. */ |
| static png_structp |
| set_modifier_for_read(png_modifier *pm, png_infopp ppi, png_uint_32 id, |
| PNG_CONST char *name) |
| { |
| volatile png_structp ppSafe = set_store_for_read(&pm->this, ppi, id, name); |
| |
| if (ppSafe != NULL) |
| { |
| if (setjmp(pm->this.jmpbuf) == 0) |
| { |
| png_set_read_fn(ppSafe, pm, modifier_read); |
| |
| pm->state = modifier_start; |
| pm->bit_depth = 0; |
| pm->colour_type = 255; |
| |
| pm->pending_len = 0; |
| pm->pending_chunk = 0; |
| pm->flush = 0; |
| pm->buffer_count = 0; |
| pm->buffer_position = 0; |
| } |
| else |
| { |
| store_read_reset(&pm->this); |
| ppSafe = NULL; |
| } |
| } |
| |
| return ppSafe; |
| } |
| |
| /***************************** STANDARD PNG FILES *****************************/ |
| /* Standard files - write and save standard files. */ |
| /* The standard files are constructed with rows which fit into a 1024 byte row |
| * buffer. This makes allocation easier below. Further regardless of the file |
| * format every file has 128 pixels (giving 1024 bytes for 64bpp formats). |
| * |
| * Files are stored with no gAMA or sBIT chunks, with a PLTE only when needed |
| * and with an ID derived from the colour type and bit depth as follows: |
| */ |
| #define FILEID(col, depth) ((png_uint_32)((col) + ((depth)<<3))) |
| #define COL_FROM_ID(id) ((id)& 0x7U) |
| #define DEPTH_FROM_ID(id) (((id) >> 3) & 0x1fU) |
| |
| #define STD_WIDTH 128U |
| #define STD_ROWMAX (STD_WIDTH*8U) |
| |
| static unsigned int |
| bit_size(png_structp pp, png_byte colour_type, png_byte bit_depth) |
| { |
| switch (colour_type) |
| { |
| case 0: return bit_depth; |
| case 2: return 3*bit_depth; |
| case 3: return bit_depth; |
| case 4: return 2*bit_depth; |
| case 6: return 4*bit_depth; |
| default: png_error(pp, "invalid color type"); |
| } |
| } |
| |
| static size_t |
| standard_rowsize(png_structp pp, png_byte colour_type, png_byte bit_depth) |
| { |
| return (STD_WIDTH * bit_size(pp, colour_type, bit_depth)) / 8; |
| } |
| |
| /* standard_wdith(pp, colour_type, bit_depth) current returns the same number |
| * every time, so just use a macro: |
| */ |
| #define standard_width(pp, colour_type, bit_depth) STD_WIDTH |
| |
| static png_uint_32 |
| standard_height(png_structp pp, png_byte colour_type, png_byte bit_depth) |
| { |
| switch (bit_size(pp, colour_type, bit_depth)) |
| { |
| case 1: |
| case 2: |
| case 4: |
| default: |
| return 1; /* Total of 128 pixels */ |
| case 8: |
| return 2; /* Total of 256 pixels/bytes */ |
| case 16: |
| return 512; /* Total of 65536 pixels */ |
| case 24: |
| case 32: |
| return 512; /* 65536 pixels */ |
| case 48: |
| case 64: |
| return 2048;/* 4 x 65536 pixels. */ |
| } |
| } |
| |
| static void |
| standard_row(png_structp pp, png_byte buffer[STD_ROWMAX], png_byte colour_type, |
| png_byte bit_depth, png_uint_32 y) |
| { |
| png_uint_32 v = y << 7; |
| png_uint_32 i = 0; |
| |
| switch (bit_size(pp, colour_type, bit_depth)) |
| { |
| case 1: |
| while (i<128/8) buffer[i] = v & 0xff, v += 17, ++i; |
| return; |
| case 2: |
| while (i<128/4) buffer[i] = v & 0xff, v += 33, ++i; |
| return; |
| case 4: |
| while (i<128/2) buffer[i] = v & 0xff, v += 65, ++i; |
| return; |
| case 8: |
| /* 256 bytes total, 128 bytes in each row set as follows: */ |
| while (i<128) buffer[i] = v & 0xff, ++v, ++i; |
| return; |
| case 16: |
| /* Generate all 65536 pixel values in order, this includes the 8 bit GA |
| * case as we as the 16 bit G case. |
| */ |
| while (i<128) |
| buffer[2*i] = (v>>8) & 0xff, buffer[2*i+1] = v & 0xff, ++v, ++i; |
| return; |
| case 24: |
| /* 65535 pixels, but rotate the values. */ |
| while (i<128) |
| { |
| /* Three bytes per pixel, r, g, b, make b by r^g */ |
| buffer[3*i+0] = (v >> 8) & 0xff; |
| buffer[3*i+1] = v & 0xff; |
| buffer[3*i+2] = ((v >> 8) ^ v) & 0xff; |
| ++v; |
| ++i; |
| } |
| return; |
| case 32: |
| /* 65535 pixels, r, g, b, a; just replicate */ |
| while (i<128) |
| { |
| buffer[4*i+0] = (v >> 8) & 0xff; |
| buffer[4*i+1] = v & 0xff; |
| buffer[4*i+2] = (v >> 8) & 0xff; |
| buffer[4*i+3] = v & 0xff; |
| ++v; |
| ++i; |
| } |
| return; |
| case 48: |
| /* y is maximum 2047, giving 4x65536 pixels, make 'r' increase by 1 at |
| * each pixel, g increase by 257 (0x101) and 'b' by 0x1111: |
| */ |
| while (i<128) |
| { |
| png_uint_32 t = v++; |
| buffer[6*i+0] = (t >> 8) & 0xff; |
| buffer[6*i+1] = t & 0xff; |
| t *= 257; |
| buffer[6*i+2] = (t >> 8) & 0xff; |
| buffer[6*i+3] = t & 0xff; |
| t *= 17; |
| buffer[6*i+4] = (t >> 8) & 0xff; |
| buffer[6*i+5] = t & 0xff; |
| ++i; |
| } |
| return; |
| case 64: |
| /* As above in the 32 bit case. */ |
| while (i<128) |
| { |
| png_uint_32 t = v++; |
| buffer[8*i+0] = (t >> 8) & 0xff; |
| buffer[8*i+1] = t & 0xff; |
| buffer[8*i+4] = (t >> 8) & 0xff; |
| buffer[8*i+5] = t & 0xff; |
| t *= 257; |
| buffer[8*i+2] = (t >> 8) & 0xff; |
| buffer[8*i+3] = t & 0xff; |
| buffer[8*i+6] = (t >> 8) & 0xff; |
| buffer[8*i+7] = t & 0xff; |
| ++i; |
| } |
| return; |
| } |
| |
| png_error(pp, "internal error"); |
| } |
| |
| static void |
| make_standard(png_store* PNG_CONST ps, png_byte PNG_CONST colour_type, |
| int PNG_CONST bdloIn, int PNG_CONST bdhi) |
| { |
| volatile int bdlo = bdloIn; |
| |
| for (; bdlo <= bdhi; ++bdlo) |
| { |
| png_byte bit_depth; |
| png_uint_32 h, y; |
| png_structp pp; |
| png_infop pi; |
| |
| { |
| size_t pos; |
| char name[64]; /* Same size as the buffer in a file. */ |
| |
| /* Build a name */ |
| pos = safecat(name, sizeof name, 0, bit_depths[bdlo]); |
| pos = safecat(name, sizeof name, pos, "bit "); |
| pos = safecat(name, sizeof name, pos, colour_types[colour_type]); |
| |
| /* Get a png_struct for writing the image. */ |
| pp = set_store_for_write(ps, &pi, name); |
| } |
| if (pp == NULL) return; |
| |
| /* Do the honourable write stuff, protected by a local setjmp */ |
| if (setjmp(ps->jmpbuf) != 0) |
| { |
| store_write_reset(ps); |
| continue; |
| } |
| |
| bit_depth = 1U << bdlo; |
| h = standard_height(pp, colour_type, bit_depth), |
| png_set_IHDR(pp, pi, standard_width(pp, colour_type, bit_depth), h, |
| bit_depth, colour_type, PNG_INTERLACE_NONE, PNG_COMPRESSION_TYPE_BASE, |
| PNG_FILTER_TYPE_BASE); |
| |
| if (colour_type == 3) /* palette */ |
| { |
| unsigned int i = 0; |
| png_color pal[256]; |
| do |
| pal[i].red = pal[i].green = pal[i].blue = (png_byte)i; |
| while(++i < 256U); |
| png_set_PLTE(pp, pi, pal, 256); |
| } |
| |
| png_write_info(pp, pi); |
| |
| if (png_get_rowbytes(pp, pi) != |
| standard_rowsize(pp, colour_type, bit_depth)) |
| png_error(pp, "row size incorrect"); |
| |
| else for (y=0; y<h; ++y) |
| { |
| png_byte buffer[STD_ROWMAX]; |
| standard_row(pp, buffer, colour_type, bit_depth, y); |
| png_write_row(pp, buffer); |
| } |
| |
| png_write_end(pp, pi); |
| |
| /* And store this under the appropriate id, then clean up. */ |
| store_storefile(ps, FILEID(colour_type, bit_depth)); |
| |
| store_write_reset(ps); |
| } |
| } |
| |
| static void |
| make_standard_images(png_store *ps) |
| { |
| /* Arguments are colour_type, low bit depth, high bit depth */ |
| make_standard(ps, 0, 0, 4); |
| make_standard(ps, 2, 3, 4); |
| make_standard(ps, 3, 0, 3); |
| make_standard(ps, 4, 3, 4); |
| make_standard(ps, 6, 3, 4); |
| } |
| |
| /* Tests - individual test cases */ |
| static void |
| test_standard(png_store* PNG_CONST ps, png_byte PNG_CONST colour_type, |
| int PNG_CONST bdloIn, int PNG_CONST bdhi) |
| { |
| volatile int bdlo = bdloIn; |
| |
| for (; bdlo <= bdhi; ++bdlo) |
| { |
| png_byte bit_depth = 1U << bdlo; |
| png_uint_32 h, y; |
| size_t cb; |
| png_structp pp; |
| png_infop pi; |
| |
| /* Get a png_struct for writing the image. */ |
| pp = set_store_for_read(ps, &pi, FILEID(colour_type, bit_depth), |
| "standard"); |
| if (pp == NULL) return; |
| |
| /* Do the honourable write stuff, protected by a local setjmp */ |
| if (setjmp(ps->jmpbuf) != 0) |
| { |
| store_read_reset(ps); |
| continue; |
| } |
| |
| h = standard_height(pp, colour_type, bit_depth); |
| |
| /* Check the header values: */ |
| png_read_info(pp, pi); |
| |
| if (png_get_image_width(pp, pi) != |
| standard_width(pp, colour_type, bit_depth)) |
| png_error(pp, "validate: image width changed"); |
| if (png_get_image_height(pp, pi) != h) |
| png_error(pp, "validate: image height changed"); |
| if (png_get_bit_depth(pp, pi) != bit_depth) |
| png_error(pp, "validate: bit depth changed"); |
| if (png_get_color_type(pp, pi) != colour_type) |
| png_error(pp, "validate: color type changed"); |
| if (png_get_filter_type(pp, pi) != PNG_FILTER_TYPE_BASE) |
| png_error(pp, "validate: filter type changed"); |
| if (png_get_interlace_type(pp, pi) != PNG_INTERLACE_NONE) |
| png_error(pp, "validate: interlacing changed"); |
| if (png_get_compression_type(pp, pi) != PNG_COMPRESSION_TYPE_BASE) |
| png_error(pp, "validate: compression type changed"); |
| if (png_set_interlace_handling(pp) != 1) |
| png_error(pp, "validate: interlacing unexpected"); |
| |
| if (colour_type == 3) /* palette */ |
| { |
| png_colorp pal; |
| int num; |
| if (png_get_PLTE(pp, pi, &pal, &num) & PNG_INFO_PLTE) |
| { |
| int i; |
| if (num != 256) |
| png_error(pp, "validate: color type 3 PLTE chunk size changed"); |
| for (i=0; i<num; ++i) |
| if (pal[i].red != i || pal[i].green != i || pal[i].blue != i) |
| png_error(pp, "validate: color type 3 PLTE chunk changed"); |
| } |
| else |
| png_error(pp, "validate: missing PLTE with color type 3"); |
| } |
| |
| cb = standard_rowsize(pp, colour_type, bit_depth); |
| png_start_read_image(pp); |
| |
| if (png_get_rowbytes(pp, pi) != cb) |
| png_error(pp, "validate: row size changed"); |
| |
| else for (y=0; y<h; ++y) |
| { |
| png_byte std[STD_ROWMAX]; |
| png_byte read[STD_ROWMAX]; |
| png_byte display[STD_ROWMAX]; |
| |
| standard_row(pp, std, colour_type, bit_depth, y); |
| png_read_row(pp, read, display); |
| |
| if (memcmp(std, read, cb) != 0) |
| { |
| char msg[64]; |
| sprintf(msg, "validate: PNG image row %d (of %d) changed", y, |
| h); |
| png_error(pp, msg); |
| } |
| if (memcmp(std, display, cb) != 0) |
| { |
| char msg[64]; |
| sprintf(msg, "validate: transformed row %d (of %d) changed", y, h); |
| png_error(pp, msg); |
| } |
| } |
| |
| png_read_end(pp, pi); |
| |
| store_read_reset(ps); |
| } |
| } |
| |
| static void |
| perform_standard_test(png_modifier *pm) |
| { |
| test_standard(&pm->this, 0, 0, 4); |
| if (fail(pm)) return; |
| test_standard(&pm->this, 2, 3, 4); |
| if (fail(pm)) return; |
| test_standard(&pm->this, 3, 0, 3); |
| if (fail(pm)) return; |
| test_standard(&pm->this, 4, 3, 4); |
| if (fail(pm)) return; |
| test_standard(&pm->this, 6, 3, 4); |
| } |
| |
| |
| /********************************* GAMMA TESTS ********************************/ |
| /* Gamma test images. */ |
| typedef struct gamma_modification |
| { |
| png_modification this; |
| png_fixed_point gamma; |
| } |
| gamma_modification; |
| |
| static int |
| gamma_modify(png_structp pp, png_modifier *pm, png_modification *me, int add) |
| { |
| UNUSED(pp); |
| UNUSED(add); |
| /* This simply dumps the given gamma value into the buffer. */ |
| png_save_uint_32(pm->buffer, 4); |
| png_save_uint_32(pm->buffer+4, CHUNK_gAMA); |
| png_save_uint_32(pm->buffer+8, ((gamma_modification*)me)->gamma); |
| return 1; |
| } |
| |
| static void |
| gamma_modification_init(gamma_modification *me, png_modifier *pm, double gamma) |
| { |
| double g; |
| |
| modification_init(&me->this); |
| me->this.chunk = CHUNK_gAMA; |
| me->this.modify_fn = gamma_modify; |
| me->this.add = CHUNK_PLTE; |
| g = floor(gamma * 100000 + .5); |
| me->gamma = (png_fixed_point)g; |
| me->this.next = pm->modifications; |
| pm->modifications = &me->this; |
| } |
| |
| typedef struct srgb_modification |
| { |
| png_modification this; |
| png_byte intent; |
| } |
| srgb_modification; |
| |
| static int |
| srgb_modify(png_structp pp, png_modifier *pm, png_modification *me, int add) |
| { |
| UNUSED(pp); |
| UNUSED(add); |
| /* As above, ignore add and just make a new chunk */ |
| png_save_uint_32(pm->buffer, 1); |
| png_save_uint_32(pm->buffer+4, CHUNK_sRGB); |
| pm->buffer[8] = ((srgb_modification*)me)->intent; |
| return 1; |
| } |
| |
| static void |
| srgb_modification_init(srgb_modification *me, png_modifier *pm, png_byte intent) |
| { |
| modification_init(&me->this); |
| me->this.chunk = CHUNK_sBIT; |
| if (intent <= 3) /* if valid, else *delete* sRGB chunks */ |
| { |
| me->this.modify_fn = srgb_modify; |
| me->this.add = CHUNK_PLTE; |
| me->intent = intent; |
| } |
| else |
| { |
| me->this.modify_fn = 0; |
| me->this.add = 0; |
| me->intent = 0; |
| } |
| me->this.next = pm->modifications; |
| pm->modifications = &me->this; |
| } |
| |
| typedef struct sbit_modification |
| { |
| png_modification this; |
| png_byte sbit; |
| } |
| sbit_modification; |
| |
| static int |
| sbit_modify(png_structp pp, png_modifier *pm, png_modification *me, int add) |
| { |
| png_byte sbit = ((sbit_modification*)me)->sbit; |
| if (pm->bit_depth > sbit) |
| { |
| int cb = 0; |
| switch (pm->colour_type) |
| { |
| case 0: cb = 1; break; |
| case 2: |
| case 3: cb = 3; break; |
| case 4: cb = 2; break; |
| case 6: cb = 4; break; |
| default: |
| png_error(pp, "unexpected colour type in sBIT modification"); |
| } |
| |
| png_save_uint_32(pm->buffer, cb); |
| png_save_uint_32(pm->buffer+4, CHUNK_sBIT); |
| while (cb > 0) |
| (pm->buffer+8)[--cb] = sbit; |
| |
| return 1; |
| } |
| else if (!add) |
| { |
| /* Remove the sBIT chunk */ |
| pm->buffer_count = pm->buffer_position = 0; |
| return 1; |
| } |
| else |
| return 0; /* do nothing */ |
| } |
| |
| static void |
| sbit_modification_init(sbit_modification *me, png_modifier *pm, png_byte sbit) |
| { |
| modification_init(&me->this); |
| me->this.chunk = CHUNK_sBIT; |
| me->this.modify_fn = sbit_modify; |
| me->this.add = CHUNK_PLTE; |
| me->sbit = sbit; |
| me->this.next = pm->modifications; |
| pm->modifications = &me->this; |
| } |
| |
| /* maxabs: maximum absolute error as a fraction |
| * maxout: maximum output error in the output units |
| * maxpc: maximum percentage error (as a percentage) |
| */ |
| static void |
| gamma_test(png_modifier *pm, PNG_CONST png_byte colour_type, |
| PNG_CONST png_byte bit_depth, PNG_CONST double file_gamma, |
| PNG_CONST double screen_gamma, PNG_CONST png_byte sbit, |
| PNG_CONST int threshold_test, PNG_CONST char *name, PNG_CONST int speed, |
| PNG_CONST int use_input_precision, PNG_CONST int strip16) |
| { |
| png_structp pp; |
| png_infop pi; |
| double maxerrout = 0, maxerrpc = 0, maxerrabs = 0; |
| |
| gamma_modification gamma_mod; |
| srgb_modification srgb_mod; |
| sbit_modification sbit_mod; |
| |
| /* Make an appropriate modifier to set the PNG file gamma to the |
| * given gamma value and the sBIT chunk to the given precision. |
| */ |
| pm->modifications = NULL; |
| gamma_modification_init(&gamma_mod, pm, file_gamma); |
| srgb_modification_init(&srgb_mod, pm, 127/*delete*/); |
| sbit_modification_init(&sbit_mod, pm, sbit); |
| |
| modification_reset(pm->modifications); |
| |
| /* Get a png_struct for writing the image. */ |
| pp = set_modifier_for_read(pm, &pi, FILEID(colour_type, bit_depth), name); |
| if (pp == NULL) return; |
| |
| /* Do the honourable write stuff, protected by a local setjmp */ |
| if (setjmp(pm->this.jmpbuf) != 0) |
| { |
| modifier_reset(pm); |
| return; |
| } |
| |
| /* Set up gamma processing. */ |
| png_set_gamma(pp, screen_gamma, file_gamma); |
| |
| /* Check the header values: */ |
| png_read_info(pp, pi); |
| |
| /* If requested strip 16 to 8 bits - this is handled automagically below |
| * because the output bit depth is read from the library. Note that there |
| * are interactions with sBIT but, internally, libpng makes sbit at most |
| * PNG_MAX_GAMMA_8 when doing the following. |
| */ |
| if (strip16) |
| png_set_strip_16(pp); |
| |
| if (png_set_interlace_handling(pp) != 1) |
| png_error(pp, "gamma: interlaced images not supported"); |
| |
| png_read_update_info(pp, pi); |
| |
| { |
| PNG_CONST png_byte out_ct = png_get_color_type(pp, pi); |
| PNG_CONST png_byte out_bd = png_get_bit_depth(pp, pi); |
| PNG_CONST unsigned int outmax = (1U<<out_bd)-1; |
| PNG_CONST png_uint_32 w = png_get_image_width(pp, pi); |
| PNG_CONST png_uint_32 h = png_get_image_height(pp, pi); |
| PNG_CONST size_t cb = png_get_rowbytes(pp, pi); /* For memcmp below. */ |
| PNG_CONST double maxabs = abserr(pm, out_bd); |
| PNG_CONST double maxout = outerr(pm, out_bd); |
| PNG_CONST double maxpc = pcerr(pm, out_bd); |
| png_uint_32 y; |
| |
| /* There are three sources of error, firstly the quantization in the file |
| * encoding, determined by sbit and/or the file depth, secondly the output |
| * (screen) gamma and thirdly the output file encoding. Since this API |
| * receives the screen and file gamma in double precision it is possible |
| * to calculate an exact answer given an input pixel value. Therefore we |
| * assume that the *input* value is exact - sample/maxsample - calculate |
| * the corresponding gamma corrected output to the limits of double |
| * precision arithmetic and compare with what libpng returns. |
| * |
| * Since the library must quantise the output to 8 or 16 bits there is a |
| * fundamental limit on the accuracy of the output of +/-.5 - this |
| * quantisation limit is included in addition to the other limits |
| * specified by the paramaters to the API. (Effectively, add .5 |
| * everywhere.) |
| * |
| * The behavior of the 'sbit' paramter is defined by section 12.5 (sample |
| * depth scaling) of the PNG spec. That section forces the decoder to |
| * assume that the PNG values have been scaled if sBIT is presence: |
| * |
| * png-sample = floor( input-sample * (max-out/max-in) + .5 ); |
| * |
| * This means that only a subset of the possible PNG values should appear |
| * in the input, however the spec allows the encoder to use a variety of |
| * approximations to the above and doesn't require any restriction of the |
| * values produced. |
| * |
| * Nevertheless the spec requires that the upper 'sBIT' bits of the value |
| * stored in a PNG file be the original sample bits. Consequently the |
| * code below simply scales the top sbit bits by (1<<sbit)-1 to obtain an |
| * original sample value. |
| * |
| * Because there is limited precision in the input it is arguable that an |
| * acceptable result is any valid result from input-.5 to input+.5. The |
| * basic tests below do not do this, however if 'use_input_precision' is |
| * set a subsequent test is performed below. |
| */ |
| PNG_CONST int processing = (fabs(screen_gamma*file_gamma-1) >= |
| PNG_GAMMA_THRESHOLD && !threshold_test && !speed && colour_type != 3) |
| || bit_depth != out_bd; |
| PNG_CONST unsigned int samples_per_pixel = (out_ct & 2U) ? 3U : 1U; |
| PNG_CONST double gamma = 1/(file_gamma*screen_gamma); /* Overall */ |
| |
| for (y=0; y<h; ++y) /* just one pass - no interlacing */ |
| { |
| unsigned int s, x; |
| png_byte std[STD_ROWMAX]; |
| png_byte display[STD_ROWMAX]; |
| |
| standard_row(pp, std, colour_type, bit_depth, y); |
| png_read_row(pp, NULL, display); |
| |
| if (processing) for (x=0; x<w; ++x) for (s=0; s<samples_per_pixel; ++s) |
| { |
| /* Input sample values: */ |
| PNG_CONST unsigned int id = |
| sample(std, colour_type, bit_depth, x, s); |
| PNG_CONST unsigned int od = sample(display, out_ct, out_bd, x, s); |
| PNG_CONST unsigned int isbit = id >> (bit_depth-sbit); |
| double i, sample, encoded_sample, output, encoded_error, error; |
| double es_lo, es_hi; |
| |
| /* First check on the 'perfect' result obtained from the digitized |
| * input value, id, and compare this against the actual digitized |
| * result, 'od'. 'i' is the input result in the range 0..1: |
| * |
| * NOTE: sbit should be taken into account here but isn't, as |
| * described above. |
| */ |
| i = isbit; i /= (1U<<sbit)-1; |
| |
| /* Then get the gamma corrected version of 'i' and compare to 'od', |
| * any error less than .5 is insignificant - just quantization of |
| * the output value to the nearest digital value (neverthelss the |
| * error is still recorded - it's interesting ;-) |
| */ |
| encoded_sample = pow(i, gamma) * outmax; |
| encoded_error = fabs(od-encoded_sample); |
| |
| if (encoded_error > maxerrout) |
| maxerrout = encoded_error; |
| |
| if (encoded_error < .5+maxout) |
| continue; |
| |
| /* There may be an error, calculate the actual sample values - |
| * unencoded light intensity values. Note that in practice these |
| * are not unencoded because they include a 'viewing correction' to |
| * decrease or (normally) increase the perceptual contrast of the |
| * image. There's nothing we can do about this - we don't know what |
| * it is - so assume the unencoded value is perceptually linear. |
| */ |
| sample = pow(i, 1/file_gamma); /* In range 0..1 */ |
| output = od; |
| output /= outmax; |
| output = pow(output, screen_gamma); |
| |
| /* Now we have the numbers for real errors, both absolute values as |
| * as a percentage of the correct value (output): |
| */ |
| error = fabs(sample-output); |
| if (error > maxerrabs) |
| maxerrabs = error; |
| /* The following is an attempt to ignore the tendency of |
| * quantization to dominate the percentage errors for low output |
| * sample values: |
| */ |
| if (sample*maxpc > .5+maxabs) |
| { |
| double pcerr = error/sample; |
| if (pcerr > maxerrpc) maxerrpc = pcerr; |
| } |
| |
| /* Now calculate the digitization limits for 'encoded_sample' using |
| * the 'max' values. Note that maxout is in the encoded space but |
| * maxpc and maxabs are in linear light space. |
| * |
| * First find the maximum error in linear light space, range 0..1: |
| */ |
| { |
| double tmp = sample * maxpc; |
| if (tmp < maxabs) tmp = maxabs; |
| |
| /* Low bound - the minimum of the three: */ |
| es_lo = encoded_sample - maxout; |
| if (es_lo > 0 && sample-tmp > 0) |
| { |
| double l = outmax * pow(sample-tmp, 1/screen_gamma); |
| if (l < es_lo) es_lo = l; |
| } |
| else |
| es_lo = 0; |
| |
| es_hi = encoded_sample + maxout; |
| if (es_hi < outmax && sample+tmp < 1) |
| { |
| double h = outmax * pow(sample+tmp, 1/screen_gamma); |
| if (h > es_hi) es_hi = h; |
| } |
| else |
| es_hi = outmax; |
| } |
| |
| /* The primary test is that the final encoded value returned by the |
| * library should be between the two limits (inclusive) that were |
| * calculated above. At this point quantization of the output must |
| * be taken into account. |
| */ |
| if (od+.5 < es_lo || od-.5 > es_hi) |
| { |
| /* Thee has been an error in processing. */ |
| double is_lo, is_hi; |
| |
| if (use_input_precision) |
| { |
| /* Ok, something is wrong - this actually happens in current |
| * libpng sbit processing. Assume that the input value (id, |
| * adjusted for sbit) can be anywhere between value-.5 and |
| * value+.5 - quite a large range if sbit is low. |
| */ |
| double tmp = (isbit - .5)/((1U<<sbit)-1); |
| if (tmp > 0) |
| { |
| is_lo = outmax * pow(tmp, gamma) - maxout; |
| if (is_lo < 0) is_lo = 0; |
| } |
| else |
| is_lo = 0; |
| |
| tmp = (isbit + .5)/((1U<<sbit)-1); |
| if (tmp < 1) |
| { |
| is_hi = outmax * pow(tmp, gamma) + maxout; |
| if (is_hi > outmax) is_hi = outmax; |
| } |
| else |
| is_hi = outmax; |
| |
| if (!(od+.5 < is_lo || od-.5 > is_hi)) |
| continue; |
| } |
| |
| { |
| char msg[256]; |
| sprintf(msg, |
| "error: %.3f; %u{%u;%u} -> %u not %.2f (%.1f-%.1f)", |
| od-encoded_sample, id, sbit, isbit, od, encoded_sample, |
| use_input_precision ? is_lo : es_lo, |
| use_input_precision ? is_hi : es_hi); |
| png_warning(pp, msg); |
| } |
| } |
| } |
| else if (!speed && memcmp(std, display, cb) != 0) |
| { |
| char msg[64]; |
| /* No transform is expected on the threshold tests. */ |
| sprintf(msg, "gamma: below threshold row %d (of %d) changed", y, h); |
| png_error(pp, msg); |
| } |
| } |
| } |
| |
| png_read_end(pp, pi); |
| modifier_reset(pm); |
| |
| if (pm->log && !threshold_test && !speed) |
| fprintf(stderr, "%d bit %s %s: max error %f (%.2g, %2g%%)\n", bit_depth, |
| colour_types[colour_type], name, maxerrout, maxerrabs, 100*maxerrpc); |
| |
| /* Log the summary values too. */ |
| if (colour_type == 0 || colour_type == 4) switch (bit_depth) |
| { |
| case 2: |
| if (maxerrout > pm->error_gray_2) pm->error_gray_2 = maxerrout; break; |
| case 4: |
| if (maxerrout > pm->error_gray_4) pm->error_gray_4 = maxerrout; break; |
| case 8: |
| if (maxerrout > pm->error_gray_8) pm->error_gray_8 = maxerrout; break; |
| case 16: |
| if (maxerrout > pm->error_gray_16) pm->error_gray_16 = maxerrout; break; |
| } |
| else if (colour_type == 2 || colour_type == 6) switch (bit_depth) |
| { |
| case 8: |
| if (maxerrout > pm->error_color_8) pm->error_color_8 = maxerrout; break; |
| case 16: |
| if (maxerrout > pm->error_color_16) pm->error_color_16 = maxerrout; break; |
| } |
| } |
| |
| static void gamma_threshold_test(png_modifier *pm, png_byte colour_type, |
| png_byte bit_depth, double file_gamma, double screen_gamma) |
| { |
| size_t pos = 0; |
| char name[64]; |
| pos = safecat(name, sizeof name, pos, "threshold "); |
| pos = safecatd(name, sizeof name, pos, file_gamma, 3); |
| pos = safecat(name, sizeof name, pos, "/"); |
| pos = safecatd(name, sizeof name, pos, screen_gamma, 3); |
| |
| (void)gamma_test(pm, colour_type, bit_depth, file_gamma, screen_gamma, |
| bit_depth, 1, name, 0/*speed*/, 0/*no input precision*/, 0/*no strip16*/); |
| } |
| |
| static void |
| perform_gamma_threshold_tests(png_modifier *pm) |
| { |
| png_byte colour_type = 0; |
| png_byte bit_depth = 0; |
| |
| while (next_format(&colour_type, &bit_depth)) |
| { |
| double gamma = 1.0; |
| while (gamma >= .4) |
| { |
| gamma_threshold_test(pm, colour_type, bit_depth, gamma, 1/gamma); |
| gamma *= .95; |
| } |
| |
| /* And a special test for sRGB */ |
| gamma_threshold_test(pm, colour_type, bit_depth, .45455, 2.2); |
| if (fail(pm)) return; |
| } |
| } |
| |
| static void gamma_transform_test(png_modifier *pm, |
| PNG_CONST png_byte colour_type, PNG_CONST png_byte bit_depth, |
| PNG_CONST double file_gamma, PNG_CONST double screen_gamma, |
| PNG_CONST png_byte sbit, PNG_CONST int speed, |
| PNG_CONST int use_input_precision, PNG_CONST int strip16) |
| { |
| size_t pos = 0; |
| char name[64]; |
| if (sbit != bit_depth) |
| { |
| pos = safecat(name, sizeof name, pos, "sbit("); |
| pos = safecatn(name, sizeof name, pos, sbit); |
| pos = safecat(name, sizeof name, pos, ") "); |
| } |
| else |
| pos = safecat(name, sizeof name, pos, "gamma "); |
| if (strip16) |
| pos = safecat(name, sizeof name, pos, "16to8 "); |
| pos = safecatd(name, sizeof name, pos, file_gamma, 3); |
| pos = safecat(name, sizeof name, pos, "->"); |
| pos = safecatd(name, sizeof name, pos, screen_gamma, 3); |
| |
| gamma_test(pm, colour_type, bit_depth, file_gamma, screen_gamma, sbit, 0, |
| name, speed, use_input_precision, strip16); |
| } |
| |
| static void perform_gamma_transform_tests(png_modifier *pm, int speed) |
| { |
| png_byte colour_type = 0; |
| png_byte bit_depth = 0; |
| |
| /* Ignore palette images - the gamma correction happens on the palette entry, |
| * haven't got the tests for this yet. |
| */ |
| while (next_format(&colour_type, &bit_depth)) if (colour_type != 3) |
| { |
| unsigned int i, j; |
| |
| for (i=0; i<pm->ngammas; ++i) for (j=0; j<pm->ngammas; ++j) if (i != j) |
| { |
| gamma_transform_test(pm, colour_type, bit_depth, 1/pm->gammas[i], |
| pm->gammas[j], bit_depth, speed, pm->use_input_precision, |
| 0/*do not strip16*/); |
| if (fail(pm)) return; |
| } |
| } |
| } |
| |
| static void perform_gamma_sbit_tests(png_modifier *pm, int speed) |
| { |
| png_byte sbit; |
| |
| /* The only interesting cases are colour and grayscale, alpha is ignored here |
| * for overall speed. Only bit depths 8 and 16 are tested. |
| */ |
| for (sbit=pm->sbitlow; sbit<16; ++sbit) |
| { |
| unsigned int i, j; |
| for (i=0; i<pm->ngammas; ++i) for (j=0; j<pm->ngammas; ++j) |
| if (i != j) |
| { |
| if (sbit < 8) |
| { |
| gamma_transform_test(pm, 0, 8, 1/pm->gammas[i], pm->gammas[j], sbit, |
| speed, pm->use_input_precision_sbit, 0/*strip16*/); |
| if (fail(pm)) return; |
| gamma_transform_test(pm, 2, 8, 1/pm->gammas[i], pm->gammas[j], sbit, |
| speed, pm->use_input_precision_sbit, 0/*strip16*/); |
| if (fail(pm)) return; |
| } |
| gamma_transform_test(pm, 0, 16, 1/pm->gammas[i], pm->gammas[j], sbit, |
| speed, pm->use_input_precision_sbit, 0/*strip16*/); |
| if (fail(pm)) return; |
| gamma_transform_test(pm, 2, 16, 1/pm->gammas[i], pm->gammas[j], sbit, |
| speed, pm->use_input_precision_sbit, 0/*strip16*/); |
| if (fail(pm)) return; |
| } |
| } |
| } |
| |
| static void perform_gamma_strip16_tests(png_modifier *pm, int speed) |
| { |
| # ifndef PNG_MAX_GAMMA_8 |
| # define PNG_MAX_GAMMA_8 11 |
| # endif |
| /* Include the alpha cases here, not that sbit matches the internal value |
| * used by the library - otherwise we will get spurious errors from the |
| * internal sbit style approximation. |
| * |
| * The threshold test is here because otherwise the 16 to 8 conversion will |
| * proceed *without* gamma correction, and the tests above will fail (but not |
| * by much) - this could be fixed, it only appears with the -g option. |
| */ |
| unsigned int i, j; |
| for (i=0; i<pm->ngammas; ++i) for (j=0; j<pm->ngammas; ++j) |
| if (i != j && fabs(pm->gammas[j]/pm->gammas[i]-1) >= PNG_GAMMA_THRESHOLD) |
| { |
| gamma_transform_test(pm, 0, 16, 1/pm->gammas[i], pm->gammas[j], |
| PNG_MAX_GAMMA_8, speed, pm->use_input_precision_16to8, 1/*strip16*/); |
| if (fail(pm)) return; |
| gamma_transform_test(pm, 2, 16, 1/pm->gammas[i], pm->gammas[j], |
| PNG_MAX_GAMMA_8, speed, pm->use_input_precision_16to8, 1/*strip16*/); |
| if (fail(pm)) return; |
| gamma_transform_test(pm, 4, 16, 1/pm->gammas[i], pm->gammas[j], |
| PNG_MAX_GAMMA_8, speed, pm->use_input_precision_16to8, 1/*strip16*/); |
| if (fail(pm)) return; |
| gamma_transform_test(pm, 6, 16, 1/pm->gammas[i], pm->gammas[j], |
| PNG_MAX_GAMMA_8, speed, pm->use_input_precision_16to8, 1/*strip16*/); |
| if (fail(pm)) return; |
| } |
| } |
| |
| static void |
| perform_gamma_test(png_modifier *pm, int speed, int summary) |
| { |
| /* First some arbitrary no-transform tests: */ |
| if (!speed) |
| { |
| perform_gamma_threshold_tests(pm); |
| if (fail(pm)) return; |
| } |
| |
| /* Now some real transforms. */ |
| perform_gamma_transform_tests(pm, speed); |
| if (summary) |
| { |
| printf("Gamma correction error summary (output value error):\n"); |
| printf(" 2 bit gray: %.5f\n", pm->error_gray_2); |
| printf(" 4 bit gray: %.5f\n", pm->error_gray_4); |
| printf(" 8 bit gray: %.5f\n", pm->error_gray_8); |
| printf(" 16 bit gray: %.5f\n", pm->error_gray_16); |
| printf(" 8 bit color: %.5f\n", pm->error_color_8); |
| printf(" 16 bit color: %.5f\n", pm->error_color_16); |
| } |
| |
| /* The sbit tests produce much larger errors: */ |
| pm->error_gray_2 = pm->error_gray_4 = pm->error_gray_8 = pm->error_gray_16 = |
| pm->error_color_8 = pm->error_color_16 = 0; |
| perform_gamma_sbit_tests(pm, speed); |
| if (summary) |
| { |
| printf("Gamma correction with sBIT:\n"); |
| if (pm->sbitlow < 8U) |
| { |
| printf(" 2 bit gray: %.5f\n", pm->error_gray_2); |
| printf(" 4 bit gray: %.5f\n", pm->error_gray_4); |
| printf(" 8 bit gray: %.5f\n", pm->error_gray_8); |
| } |
| printf(" 16 bit gray: %.5f\n", pm->error_gray_16); |
| if (pm->sbitlow < 8U) |
| printf(" 8 bit color: %.5f\n", pm->error_color_8); |
| printf(" 16 bit color: %.5f\n", pm->error_color_16); |
| } |
| |
| /* The 16 to 8 bit strip operations: */ |
| pm->error_gray_2 = pm->error_gray_4 = pm->error_gray_8 = pm->error_gray_16 = |
| pm->error_color_8 = pm->error_color_16 = 0; |
| perform_gamma_strip16_tests(pm, speed); |
| if (summary) |
| { |
| printf("Gamma correction with 16 to 8 bit reduction:\n"); |
| printf(" 16 bit gray: %.5f\n", pm->error_gray_16); |
| printf(" 16 bit color: %.5f\n", pm->error_color_16); |
| } |
| } |
| |
| /* main program */ |
| int main(int argc, PNG_CONST char **argv) |
| { |
| int summary = 1; /* Print the error sumamry at the end */ |
| int speed = 0; /* Speed test only (for gamma stuff) */ |
| PNG_CONST char *touch = NULL; /* Create the given output file on success. */ |
| |
| /* This is an array of standard gamma values (believe it or not I've seen |
| * every one of these mentioned somewhere.) |
| * |
| * In the following list the most useful values are first! |
| */ |
| static double gammas[]={2.2, 1.0, 2.2/1.45, 1.8, 1.5, 2.4, 2.5, 2.62, 2.9}; |
| |
| png_modifier pm; |
| modifier_init(&pm); |
| |
| /* Default to error on warning: */ |
| pm.this.treat_warnings_as_errors = 1; |
| |
| /* Store the test gammas */ |
| pm.gammas = gammas; |
| pm.ngammas = 3U; /* for speed */ |
| pm.sbitlow = 8U; /* because libpng doesn't do sbit below 8! */ |
| pm.use_input_precision_16to8 = 1U; /* Because of the way libpng does it */ |
| |
| /* Some default values (set the behavior for 'make check' here) */ |
| pm.maxout8 = .1; /* Arithmetic error in *encoded* value */ |
| pm.maxabs8 = .00005; /* 1/20000 */ |
| pm.maxpc8 = .499; /* I.e. .499% fractional error */ |
| pm.maxout16 = .499; /* Error in *encoded* value */ |
| pm.maxabs16 = .00005;/* 1/20000 */ |
| /* NOTE: this is a reasonable perceptual limit, we assume that humans can |
| * perceive light level differences of 1% over a 100:1 range, so we need to |
| * maintain 1 in 10000 accuracy (in linear light space), this is what the |
| * following guarantees. It also allows significantly higher errors at |
| * higher 16 bit values, which is important for performance. The actual |
| * maximum 16 bit error is about +/-1.9 in the fixed point implementation but |
| * this is only allowed for values >38149 by the following: |
| */ |
| pm.maxpc16 = .005; /* I.e. 1/200% - 1/20000 */ |
| |
| /* Now parse the command line options. */ |
| while (--argc >= 1) |
| if (strcmp(*++argv, "-v") == 0) |
| pm.this.verbose = 1; |
| else if (strcmp(*argv, "-l") == 0) |
| pm.log = 1; |
| else if (strcmp(*argv, "-q") == 0) |
| pm.this.verbose = pm.log = summary = 0; |
| else if (strcmp(*argv, "-g") == 0) |
| pm.ngammas = (sizeof gammas)/(sizeof gammas[0]); |
| else if (strcmp(*argv, "-w") == 0) |
| pm.this.treat_warnings_as_errors = 0; |
| else if (strcmp(*argv, "--speed") == 0) |
| speed = 1, pm.ngammas = (sizeof gammas)/(sizeof gammas[0]); |
| else if (argc >= 1 && strcmp(*argv, "--sbitlow") == 0) |
| --argc, pm.sbitlow = (png_byte)atoi(*++argv); |
| else if (argc >= 1 && strcmp(*argv, "--touch") == 0) |
| --argc, touch = *++argv; |
| else if (argc >= 1 && strncmp(*argv, "--max", 4) == 0) |
| { |
| --argc; |
| if (strcmp(4+*argv, "abs8") == 0) |
| pm.maxabs8 = atof(*++argv); |
| else if (strcmp(4+*argv, "abs16") == 0) |
| pm.maxabs16 = atof(*++argv); |
| else if (strcmp(4+*argv, "out8") == 0) |
| pm.maxout8 = atof(*++argv); |
| else if (strcmp(4+*argv, "out16") == 0) |
| pm.maxout16 = atof(*++argv); |
| else if (strcmp(4+*argv, "pc8") == 0) |
| pm.maxpc8 = atof(*++argv); |
| else if (strcmp(4+*argv, "pc16") == 0) |
| pm.maxpc16 = atof(*++argv); |
| else |
| { |
| fprintf(stderr, "pngvalid: %s: unknown 'max' option\n", *argv); |
| exit(1); |
| } |
| } |
| else |
| { |
| fprintf(stderr, "pngvalid: %s: unknown argument\n", *argv); |
| exit(1); |
| } |
| |
| /* Make useful base images */ |
| make_standard_images(&pm.this); |
| |
| /* Perform the standard and gamma tests. */ |
| if (!speed) |
| perform_standard_test(&pm); |
| perform_gamma_test(&pm, speed, summary && !speed); |
| if (summary && !speed) |
| printf("Results using %s point arithmetic %s\n", |
| #if defined(PNG_FLOATING_ARITHMETIC_SUPPORTED) || PNG_LIBPNG_VER < 10500 |
| "floating", |
| #else |
| "fixed", |
| #endif |
| (pm.this.nerrors || (pm.this.treat_warnings_as_errors && |
| pm.this.nwarnings)) ? "(errors)" : (pm.this.nwarnings ? |
| "(warnings)" : "(no errors or warnings)") |
| ); |
| |
| /* Error exit if there are any errors, and maybe if there are any |
| * warnings. |
| */ |
| if (pm.this.nerrors || (pm.this.treat_warnings_as_errors && |
| pm.this.nwarnings)) |
| { |
| if (!pm.this.verbose) |
| fprintf(stderr, "pngvalid: %s\n", pm.this.error); |
| fprintf(stderr, "pngvalid: %d errors, %d warnings\n", pm.this.nerrors, |
| pm.this.nwarnings); |
| exit(1); |
| } |
| |
| /* Success case. */ |
| if (touch != NULL) |
| { |
| FILE *fsuccess = fopen(touch, "wt"); |
| if (fsuccess != NULL) |
| { |
| int error = 0; |
| fprintf(fsuccess, "PNG validation succeeded\n"); |
| fflush(fsuccess); |
| error = ferror(fsuccess); |
| if (fclose(fsuccess) || error) |
| { |
| fprintf(stderr, "%s: write failed\n", touch); |
| exit(1); |
| } |
| } |
| } |
| |
| return 0; |
| } |