| |
| /* pngvalid.c - validate libpng by constructing then reading png files. |
| * |
| * Last changed in libpng 1.6.0 [(PENDING RELEASE)] |
| * Copyright (c) 2011 Glenn Randers-Pehrson |
| * Written by John Cunningham Bowler |
| * |
| * This code is released under the libpng license. |
| * For conditions of distribution and use, see the disclaimer |
| * and license in png.h |
| * |
| * NOTES: |
| * This is a C program that is intended to be linked against libpng. It |
| * generates bitmaps internally, stores them as PNG files (using the |
| * sequential write code) then reads them back (using the sequential |
| * read code) and validates that the result has the correct data. |
| * |
| * The program can be modified and extended to test the correctness of |
| * transformations performed by libpng. |
| */ |
| |
| #define _POSIX_SOURCE 1 |
| #define _ISOC99_SOURCE 1 /* For floating point */ |
| #define _GNU_SOURCE 1 /* For the floating point exception extension */ |
| |
| #include <signal.h> |
| |
| #if (defined HAVE_CONFIG_H) && !(defined PNG_NO_CONFIG_H) |
| # include <config.h> |
| #endif |
| |
| #ifdef HAVE_FEENABLEEXCEPT /* from config.h, if included */ |
| # include <fenv.h> |
| #endif |
| |
| /* Define the following to use this test against your installed libpng, rather |
| * than the one being built here: |
| */ |
| #ifdef PNG_FREESTANDING_TESTS |
| # include <png.h> |
| #else |
| # include "../../png.h" |
| #endif |
| |
| #if PNG_LIBPNG_VER < 10500 |
| /* This deliberately lacks the PNG_CONST. */ |
| typedef png_byte *png_const_bytep; |
| |
| /* This is copied from 1.5.1 png.h: */ |
| #define PNG_INTERLACE_ADAM7_PASSES 7 |
| #define PNG_PASS_START_ROW(pass) (((1U&~(pass))<<(3-((pass)>>1)))&7) |
| #define PNG_PASS_START_COL(pass) (((1U& (pass))<<(3-(((pass)+1)>>1)))&7) |
| #define PNG_PASS_ROW_SHIFT(pass) ((pass)>2?(8-(pass))>>1:3) |
| #define PNG_PASS_COL_SHIFT(pass) ((pass)>1?(7-(pass))>>1:3) |
| #define PNG_PASS_ROWS(height, pass) (((height)+(((1<<PNG_PASS_ROW_SHIFT(pass))\ |
| -1)-PNG_PASS_START_ROW(pass)))>>PNG_PASS_ROW_SHIFT(pass)) |
| #define PNG_PASS_COLS(width, pass) (((width)+(((1<<PNG_PASS_COL_SHIFT(pass))\ |
| -1)-PNG_PASS_START_COL(pass)))>>PNG_PASS_COL_SHIFT(pass)) |
| #define PNG_ROW_FROM_PASS_ROW(yIn, pass) \ |
| (((yIn)<<PNG_PASS_ROW_SHIFT(pass))+PNG_PASS_START_ROW(pass)) |
| #define PNG_COL_FROM_PASS_COL(xIn, pass) \ |
| (((xIn)<<PNG_PASS_COL_SHIFT(pass))+PNG_PASS_START_COL(pass)) |
| #define PNG_PASS_MASK(pass,off) ( \ |
| ((0x110145AFU>>(((7-(off))-(pass))<<2)) & 0xFU) | \ |
| ((0x01145AF0U>>(((7-(off))-(pass))<<2)) & 0xF0U)) |
| #define PNG_ROW_IN_INTERLACE_PASS(y, pass) \ |
| ((PNG_PASS_MASK(pass,0) >> ((y)&7)) & 1) |
| #define PNG_COL_IN_INTERLACE_PASS(x, pass) \ |
| ((PNG_PASS_MASK(pass,1) >> ((x)&7)) & 1) |
| |
| /* These are needed too for the default build: */ |
| #define PNG_WRITE_16BIT_SUPPORTED |
| #define PNG_READ_16BIT_SUPPORTED |
| |
| /* This comes from pnglibconf.h afer 1.5: */ |
| #define PNG_FP_1 100000 |
| #define PNG_GAMMA_THRESHOLD_FIXED\ |
| ((png_fixed_point)(PNG_GAMMA_THRESHOLD * PNG_FP_1)) |
| #endif |
| |
| #if PNG_LIBPNG_VER < 10600 |
| /* 1.6.0 constifies many APIs, the following exists to allow pngvalid to be |
| * compiled against earlier versions. |
| */ |
| # define png_const_strutp png_structp |
| #endif |
| |
| #include "zlib.h" /* For crc32 */ |
| |
| #include <float.h> /* For floating point constants */ |
| #include <stdlib.h> /* For malloc */ |
| #include <string.h> /* For memcpy, memset */ |
| #include <math.h> /* For floor */ |
| |
| /* Unused formal parameter errors are removed using the following macro which is |
| * expected to have no bad effects on performance. |
| */ |
| #ifndef UNUSED |
| # if defined(__GNUC__) || defined(_MSC_VER) |
| # define UNUSED(param) (void)param; |
| # else |
| # define UNUSED(param) |
| # endif |
| #endif |
| |
| /***************************** EXCEPTION HANDLING *****************************/ |
| #include "../visupng/cexcept.h" |
| |
| #ifdef __cplusplus |
| # define this not_the_cpp_this |
| # define new not_the_cpp_new |
| # define voidcast(type, value) static_cast<type>(value) |
| #else |
| # define voidcast(type, value) (value) |
| #endif /* __cplusplus */ |
| |
| struct png_store; |
| define_exception_type(struct png_store*); |
| |
| /* The following are macros to reduce typing everywhere where the well known |
| * name 'the_exception_context' must be defined. |
| */ |
| #define anon_context(ps) struct exception_context *the_exception_context = \ |
| &(ps)->exception_context |
| #define context(ps,fault) anon_context(ps); png_store *fault |
| |
| /******************************* UTILITIES ************************************/ |
| /* Error handling is particularly problematic in production code - error |
| * handlers often themselves have bugs which lead to programs that detect |
| * minor errors crashing. The following functions deal with one very |
| * common class of errors in error handlers - attempting to format error or |
| * warning messages into buffers that are too small. |
| */ |
| static size_t safecat(char *buffer, size_t bufsize, size_t pos, |
| PNG_CONST char *cat) |
| { |
| while (pos < bufsize && cat != NULL && *cat != 0) |
| buffer[pos++] = *cat++; |
| |
| if (pos >= bufsize) |
| pos = bufsize-1; |
| |
| buffer[pos] = 0; |
| return pos; |
| } |
| |
| static size_t safecatn(char *buffer, size_t bufsize, size_t pos, int n) |
| { |
| char number[64]; |
| sprintf(number, "%d", n); |
| return safecat(buffer, bufsize, pos, number); |
| } |
| |
| #ifdef PNG_READ_TRANSFORMS_SUPPORTED |
| static size_t safecatd(char *buffer, size_t bufsize, size_t pos, double d, |
| int precision) |
| { |
| char number[64]; |
| sprintf(number, "%.*f", precision, d); |
| return safecat(buffer, bufsize, pos, number); |
| } |
| #endif |
| |
| static PNG_CONST char invalid[] = "invalid"; |
| static PNG_CONST char sep[] = ": "; |
| |
| static PNG_CONST char *colour_types[8] = |
| { |
| "grayscale", invalid, "truecolour", "indexed-colour", |
| "grayscale with alpha", invalid, "truecolour with alpha", invalid |
| }; |
| |
| /* Convert a double precision value to fixed point. */ |
| static png_fixed_point |
| fix(double d) |
| { |
| d = floor(d * PNG_FP_1 + .5); |
| return (png_fixed_point)d; |
| } |
| |
| /* Generate random bytes. This uses a boring repeatable algorithm and it |
| * is implemented here so that it gives the same set of numbers on every |
| * architecture. It's a linear congruential generator (Knuth or Sedgewick |
| * "Algorithms") but it comes from the 'feedback taps' table in Horowitz and |
| * Hill, "The Art of Electronics". |
| */ |
| static void |
| make_random_bytes(png_uint_32* seed, void* pv, size_t size) |
| { |
| png_uint_32 u0 = seed[0], u1 = seed[1]; |
| png_bytep bytes = voidcast(png_bytep, pv); |
| |
| /* There are thirty three bits, the next bit in the sequence is bit-33 XOR |
| * bit-20. The top 1 bit is in u1, the bottom 32 are in u0. |
| */ |
| size_t i; |
| for (i=0; i<size; ++i) |
| { |
| /* First generate 8 new bits then shift them in at the end. */ |
| png_uint_32 u = ((u0 >> (20-8)) ^ ((u1 << 7) | (u0 >> (32-7)))) & 0xff; |
| u1 <<= 8; |
| u1 |= u0 >> 24; |
| u0 <<= 8; |
| u0 |= u; |
| *bytes++ = (png_byte)u; |
| } |
| |
| seed[0] = u0; |
| seed[1] = u1; |
| } |
| |
| static void |
| make_four_random_bytes(png_uint_32* seed, png_bytep bytes) |
| { |
| make_random_bytes(seed, bytes, 4); |
| } |
| |
| static void |
| randomize(void *pv, size_t size) |
| { |
| static png_uint_32 random_seed[2] = {0x56789abc, 0xd}; |
| make_random_bytes(random_seed, pv, size); |
| } |
| |
| #define RANDOMIZE(this) randomize(&(this), sizeof (this)) |
| |
| static unsigned int |
| random_mod(unsigned int max) |
| { |
| unsigned int x; |
| |
| RANDOMIZE(x); |
| |
| return x % max; /* 0 .. max-1 */ |
| } |
| |
| static int |
| random_choice(void) |
| { |
| unsigned char x; |
| |
| RANDOMIZE(x); |
| |
| return x & 1; |
| } |
| |
| /* A numeric ID based on PNG file characteristics. The 'do_interlace' field |
| * simply records whether pngvalid did the interlace itself or whether it |
| * was done by libpng. Width and height must be less than 256. 'palette' is an |
| * index of the palette to use for formats with a palette (0 otherwise.) |
| */ |
| #define FILEID(col, depth, palette, interlace, width, height, do_interlace) \ |
| ((png_uint_32)((col) + ((depth)<<3) + ((palette)<<8) + ((interlace)<<13) + \ |
| (((do_interlace)!=0)<<15) + ((width)<<16) + ((height)<<24))) |
| |
| #define COL_FROM_ID(id) ((png_byte)((id)& 0x7U)) |
| #define DEPTH_FROM_ID(id) ((png_byte)(((id) >> 3) & 0x1fU)) |
| #define PALETTE_FROM_ID(id) ((int)(((id) >> 8) & 0x1f)) |
| #define INTERLACE_FROM_ID(id) ((int)(((id) >> 13) & 0x3)) |
| #define DO_INTERLACE_FROM_ID(id) ((int)(((id)>>15) & 1)) |
| #define WIDTH_FROM_ID(id) (((id)>>16) & 0xff) |
| #define HEIGHT_FROM_ID(id) (((id)>>24) & 0xff) |
| |
| /* Utility to construct a standard name for a standard image. */ |
| static size_t |
| standard_name(char *buffer, size_t bufsize, size_t pos, png_byte colour_type, |
| int bit_depth, int npalette, int interlace_type, |
| png_uint_32 w, png_uint_32 h, int do_interlace) |
| { |
| pos = safecat(buffer, bufsize, pos, colour_types[colour_type]); |
| if (npalette > 0) |
| { |
| pos = safecat(buffer, bufsize, pos, "["); |
| pos = safecatn(buffer, bufsize, pos, npalette); |
| pos = safecat(buffer, bufsize, pos, "]"); |
| } |
| pos = safecat(buffer, bufsize, pos, " "); |
| pos = safecatn(buffer, bufsize, pos, bit_depth); |
| pos = safecat(buffer, bufsize, pos, " bit"); |
| |
| if (interlace_type != PNG_INTERLACE_NONE) |
| { |
| pos = safecat(buffer, bufsize, pos, " interlaced"); |
| if (do_interlace) |
| pos = safecat(buffer, bufsize, pos, "(pngvalid)"); |
| else |
| pos = safecat(buffer, bufsize, pos, "(libpng)"); |
| } |
| |
| if (w > 0 || h > 0) |
| { |
| pos = safecat(buffer, bufsize, pos, " "); |
| pos = safecatn(buffer, bufsize, pos, w); |
| pos = safecat(buffer, bufsize, pos, "x"); |
| pos = safecatn(buffer, bufsize, pos, h); |
| } |
| |
| return pos; |
| } |
| |
| static size_t |
| standard_name_from_id(char *buffer, size_t bufsize, size_t pos, png_uint_32 id) |
| { |
| return standard_name(buffer, bufsize, pos, COL_FROM_ID(id), |
| DEPTH_FROM_ID(id), PALETTE_FROM_ID(id), INTERLACE_FROM_ID(id), |
| WIDTH_FROM_ID(id), HEIGHT_FROM_ID(id), DO_INTERLACE_FROM_ID(id)); |
| } |
| |
| /* Convenience API and defines to list valid formats. Note that 16 bit read and |
| * write support is required to do 16 bit read tests (we must be able to make a |
| * 16 bit image to test!) |
| */ |
| #ifdef PNG_WRITE_16BIT_SUPPORTED |
| # define WRITE_BDHI 4 |
| # ifdef PNG_READ_16BIT_SUPPORTED |
| # define READ_BDHI 4 |
| # define DO_16BIT |
| # endif |
| #else |
| # define WRITE_BDHI 3 |
| #endif |
| #ifndef DO_16BIT |
| # define READ_BDHI 3 |
| #endif |
| |
| /* The following defines the number of different palettes to generate for |
| * each log bit depth of a colour type 3 standard image. |
| */ |
| #define PALETTE_COUNT(bit_depth) ((bit_depth) > 4 ? 1 : 16) |
| |
| static int |
| next_format(png_bytep colour_type, png_bytep bit_depth, int* palette_number) |
| { |
| if (*bit_depth == 0) |
| { |
| *colour_type = 0, *bit_depth = 1, *palette_number = 0; |
| return 1; |
| } |
| |
| if (*colour_type == 3) |
| { |
| /* Add multiple palettes for colour type 3. */ |
| if (++*palette_number < PALETTE_COUNT(*bit_depth)) |
| return 1; |
| |
| *palette_number = 0; |
| } |
| |
| *bit_depth = (png_byte)(*bit_depth << 1); |
| |
| /* Palette images are restricted to 8 bit depth */ |
| if (*bit_depth <= 8 |
| # ifdef DO_16BIT |
| || (*colour_type != 3 && *bit_depth <= 16) |
| # endif |
| ) |
| return 1; |
| |
| /* Move to the next color type, or return 0 at the end. */ |
| switch (*colour_type) |
| { |
| case 0: |
| *colour_type = 2; |
| *bit_depth = 8; |
| return 1; |
| |
| case 2: |
| *colour_type = 3; |
| *bit_depth = 1; |
| return 1; |
| |
| case 3: |
| *colour_type = 4; |
| *bit_depth = 8; |
| return 1; |
| |
| case 4: |
| *colour_type = 6; |
| *bit_depth = 8; |
| return 1; |
| |
| default: |
| return 0; |
| } |
| } |
| |
| #ifdef PNG_READ_TRANSFORMS_SUPPORTED |
| static unsigned int |
| sample(png_const_bytep row, png_byte colour_type, png_byte bit_depth, |
| png_uint_32 x, unsigned int sample_index) |
| { |
| png_uint_32 bit_index, result; |
| |
| /* Find a sample index for the desired sample: */ |
| x *= bit_depth; |
| bit_index = x; |
| |
| if ((colour_type & 1) == 0) /* !palette */ |
| { |
| if (colour_type & 2) |
| bit_index *= 3; |
| |
| if (colour_type & 4) |
| bit_index += x; /* Alpha channel */ |
| |
| /* Multiple channels; select one: */ |
| if (colour_type & (2+4)) |
| bit_index += sample_index * bit_depth; |
| } |
| |
| /* Return the sample from the row as an integer. */ |
| row += bit_index >> 3; |
| result = *row; |
| |
| if (bit_depth == 8) |
| return result; |
| |
| else if (bit_depth > 8) |
| return (result << 8) + *++row; |
| |
| /* Less than 8 bits per sample. */ |
| bit_index &= 7; |
| return (result >> (8-bit_index-bit_depth)) & ((1U<<bit_depth)-1); |
| } |
| #endif /* PNG_READ_TRANSFORMS_SUPPORTED */ |
| |
| /* Copy a single pixel, of a given size, from one buffer to another - |
| * while this is basically bit addressed there is an implicit assumption |
| * that pixels 8 or more bits in size are byte aligned and that pixels |
| * do not otherwise cross byte boundaries. (This is, so far as I know, |
| * universally true in bitmap computer graphics. [JCB 20101212]) |
| * |
| * NOTE: The to and from buffers may be the same. |
| */ |
| static void |
| pixel_copy(png_bytep toBuffer, png_uint_32 toIndex, |
| png_const_bytep fromBuffer, png_uint_32 fromIndex, unsigned int pixelSize) |
| { |
| /* Assume we can multiply by 'size' without overflow because we are |
| * just working in a single buffer. |
| */ |
| toIndex *= pixelSize; |
| fromIndex *= pixelSize; |
| if (pixelSize < 8) /* Sub-byte */ |
| { |
| /* Mask to select the location of the copied pixel: */ |
| unsigned int destMask = ((1U<<pixelSize)-1) << (8-pixelSize-(toIndex&7)); |
| /* The following read the entire pixels and clears the extra: */ |
| unsigned int destByte = toBuffer[toIndex >> 3] & ~destMask; |
| unsigned int sourceByte = fromBuffer[fromIndex >> 3]; |
| |
| /* Don't rely on << or >> supporting '0' here, just in case: */ |
| fromIndex &= 7; |
| if (fromIndex > 0) sourceByte <<= fromIndex; |
| if ((toIndex & 7) > 0) sourceByte >>= toIndex & 7; |
| |
| toBuffer[toIndex >> 3] = (png_byte)(destByte | (sourceByte & destMask)); |
| } |
| else /* One or more bytes */ |
| memmove(toBuffer+(toIndex>>3), fromBuffer+(fromIndex>>3), pixelSize>>3); |
| } |
| |
| /* Copy a complete row of pixels, taking into account potential partial |
| * bytes at the end. |
| */ |
| static void |
| row_copy(png_bytep toBuffer, png_const_bytep fromBuffer, unsigned int bitWidth) |
| { |
| memcpy(toBuffer, fromBuffer, bitWidth >> 3); |
| |
| if ((bitWidth & 7) != 0) |
| { |
| unsigned int mask; |
| |
| toBuffer += bitWidth >> 3; |
| fromBuffer += bitWidth >> 3; |
| /* The remaining bits are in the top of the byte, the mask is the bits to |
| * retain. |
| */ |
| mask = 0xff >> (bitWidth & 7); |
| *toBuffer = (png_byte)((*toBuffer & mask) | (*fromBuffer & ~mask)); |
| } |
| } |
| |
| /* Compare pixels - they are assumed to start at the first byte in the |
| * given buffers. |
| */ |
| static int |
| pixel_cmp(png_const_bytep pa, png_const_bytep pb, png_uint_32 bit_width) |
| { |
| #if PNG_LIBPNG_VER < 10506 |
| if (memcmp(pa, pb, bit_width>>3) == 0) |
| { |
| png_uint_32 p; |
| |
| if ((bit_width & 7) == 0) return 0; |
| |
| /* Ok, any differences? */ |
| p = pa[bit_width >> 3]; |
| p ^= pb[bit_width >> 3]; |
| |
| if (p == 0) return 0; |
| |
| /* There are, but they may not be significant, remove the bits |
| * after the end (the low order bits in PNG.) |
| */ |
| bit_width &= 7; |
| p >>= 8-bit_width; |
| |
| if (p == 0) return 0; |
| } |
| #else |
| /* From libpng-1.5.6 the overwrite should be fixed, so compare the trailing |
| * bits too: |
| */ |
| if (memcmp(pa, pb, (bit_width+7)>>3) == 0) |
| return 0; |
| #endif |
| |
| /* Return the index of the changed byte. */ |
| { |
| png_uint_32 where = 0; |
| |
| while (pa[where] == pb[where]) ++where; |
| return 1+where; |
| } |
| } |
| |
| /*************************** BASIC PNG FILE WRITING ***************************/ |
| /* A png_store takes data from the sequential writer or provides data |
| * to the sequential reader. It can also store the result of a PNG |
| * write for later retrieval. |
| */ |
| #define STORE_BUFFER_SIZE 500 /* arbitrary */ |
| typedef struct png_store_buffer |
| { |
| struct png_store_buffer* prev; /* NOTE: stored in reverse order */ |
| png_byte buffer[STORE_BUFFER_SIZE]; |
| } png_store_buffer; |
| |
| #define FILE_NAME_SIZE 64 |
| |
| typedef struct store_palette_entry /* record of a single palette entry */ |
| { |
| png_byte red; |
| png_byte green; |
| png_byte blue; |
| png_byte alpha; |
| } store_palette_entry, store_palette[256]; |
| |
| typedef struct png_store_file |
| { |
| struct png_store_file* next; /* as many as you like... */ |
| char name[FILE_NAME_SIZE]; |
| png_uint_32 id; /* must be correct (see FILEID) */ |
| png_size_t datacount; /* In this (the last) buffer */ |
| png_store_buffer data; /* Last buffer in file */ |
| int npalette; /* Number of entries in palette */ |
| store_palette_entry* palette; /* May be NULL */ |
| } png_store_file; |
| |
| /* The following is a pool of memory allocated by a single libpng read or write |
| * operation. |
| */ |
| typedef struct store_pool |
| { |
| struct png_store *store; /* Back pointer */ |
| struct store_memory *list; /* List of allocated memory */ |
| png_byte mark[4]; /* Before and after data */ |
| |
| /* Statistics for this run. */ |
| png_alloc_size_t max; /* Maximum single allocation */ |
| png_alloc_size_t current; /* Current allocation */ |
| png_alloc_size_t limit; /* Highest current allocation */ |
| png_alloc_size_t total; /* Total allocation */ |
| |
| /* Overall statistics (retained across successive runs). */ |
| png_alloc_size_t max_max; |
| png_alloc_size_t max_limit; |
| png_alloc_size_t max_total; |
| } store_pool; |
| |
| typedef struct png_store |
| { |
| /* For cexcept.h exception handling - simply store one of these; |
| * the context is a self pointer but it may point to a different |
| * png_store (in fact it never does in this program.) |
| */ |
| struct exception_context |
| exception_context; |
| |
| unsigned int verbose :1; |
| unsigned int treat_warnings_as_errors :1; |
| unsigned int expect_error :1; |
| unsigned int expect_warning :1; |
| unsigned int saw_warning :1; |
| unsigned int speed :1; |
| unsigned int progressive :1; /* use progressive read */ |
| unsigned int validated :1; /* used as a temporary flag */ |
| int nerrors; |
| int nwarnings; |
| char test[128]; /* Name of test */ |
| char error[256]; |
| |
| /* Read fields */ |
| png_structp pread; /* Used to read a saved file */ |
| png_infop piread; |
| png_store_file* current; /* Set when reading */ |
| png_store_buffer* next; /* Set when reading */ |
| png_size_t readpos; /* Position in *next */ |
| png_byte* image; /* Buffer for reading interlaced images */ |
| png_size_t cb_image; /* Size of this buffer */ |
| png_size_t cb_row; /* Row size of the image(s) */ |
| png_uint_32 image_h; /* Number of rows in a single image */ |
| store_pool read_memory_pool; |
| |
| /* Write fields */ |
| png_store_file* saved; |
| png_structp pwrite; /* Used when writing a new file */ |
| png_infop piwrite; |
| png_size_t writepos; /* Position in .new */ |
| char wname[FILE_NAME_SIZE]; |
| png_store_buffer new; /* The end of the new PNG file being written. */ |
| store_pool write_memory_pool; |
| store_palette_entry* palette; |
| int npalette; |
| } png_store; |
| |
| /* Initialization and cleanup */ |
| static void |
| store_pool_mark(png_bytep mark) |
| { |
| static png_uint_32 store_seed[2] = { 0x12345678, 1}; |
| |
| make_four_random_bytes(store_seed, mark); |
| } |
| |
| /* Use this for random 32 bit values; this function makes sure the result is |
| * non-zero. |
| */ |
| static png_uint_32 |
| random_32(void) |
| { |
| |
| for(;;) |
| { |
| png_byte mark[4]; |
| png_uint_32 result; |
| |
| store_pool_mark(mark); |
| result = png_get_uint_32(mark); |
| |
| if (result != 0) |
| return result; |
| } |
| } |
| |
| static void |
| store_pool_init(png_store *ps, store_pool *pool) |
| { |
| memset(pool, 0, sizeof *pool); |
| |
| pool->store = ps; |
| pool->list = NULL; |
| pool->max = pool->current = pool->limit = pool->total = 0; |
| pool->max_max = pool->max_limit = pool->max_total = 0; |
| store_pool_mark(pool->mark); |
| } |
| |
| static void |
| store_init(png_store* ps) |
| { |
| memset(ps, 0, sizeof *ps); |
| init_exception_context(&ps->exception_context); |
| store_pool_init(ps, &ps->read_memory_pool); |
| store_pool_init(ps, &ps->write_memory_pool); |
| ps->verbose = 0; |
| ps->treat_warnings_as_errors = 0; |
| ps->expect_error = 0; |
| ps->expect_warning = 0; |
| ps->saw_warning = 0; |
| ps->speed = 0; |
| ps->progressive = 0; |
| ps->validated = 0; |
| ps->nerrors = ps->nwarnings = 0; |
| ps->pread = NULL; |
| ps->piread = NULL; |
| ps->saved = ps->current = NULL; |
| ps->next = NULL; |
| ps->readpos = 0; |
| ps->image = NULL; |
| ps->cb_image = 0; |
| ps->cb_row = 0; |
| ps->image_h = 0; |
| ps->pwrite = NULL; |
| ps->piwrite = NULL; |
| ps->writepos = 0; |
| ps->new.prev = NULL; |
| ps->palette = NULL; |
| ps->npalette = 0; |
| } |
| |
| static void |
| store_freebuffer(png_store_buffer* psb) |
| { |
| if (psb->prev) |
| { |
| store_freebuffer(psb->prev); |
| free(psb->prev); |
| psb->prev = NULL; |
| } |
| } |
| |
| static void |
| store_freenew(png_store *ps) |
| { |
| store_freebuffer(&ps->new); |
| ps->writepos = 0; |
| if (ps->palette != NULL) |
| { |
| free(ps->palette); |
| ps->palette = NULL; |
| ps->npalette = 0; |
| } |
| } |
| |
| static void |
| store_storenew(png_store *ps) |
| { |
| png_store_buffer *pb; |
| |
| if (ps->writepos != STORE_BUFFER_SIZE) |
| png_error(ps->pwrite, "invalid store call"); |
| |
| pb = voidcast(png_store_buffer*, malloc(sizeof *pb)); |
| |
| if (pb == NULL) |
| png_error(ps->pwrite, "store new: OOM"); |
| |
| *pb = ps->new; |
| ps->new.prev = pb; |
| ps->writepos = 0; |
| } |
| |
| static void |
| store_freefile(png_store_file **ppf) |
| { |
| if (*ppf != NULL) |
| { |
| store_freefile(&(*ppf)->next); |
| |
| store_freebuffer(&(*ppf)->data); |
| (*ppf)->datacount = 0; |
| if ((*ppf)->palette != NULL) |
| { |
| free((*ppf)->palette); |
| (*ppf)->palette = NULL; |
| (*ppf)->npalette = 0; |
| } |
| free(*ppf); |
| *ppf = NULL; |
| } |
| } |
| |
| /* Main interface to file storeage, after writing a new PNG file (see the API |
| * below) call store_storefile to store the result with the given name and id. |
| */ |
| static void |
| store_storefile(png_store *ps, png_uint_32 id) |
| { |
| png_store_file *pf = voidcast(png_store_file*, malloc(sizeof *pf)); |
| if (pf == NULL) |
| png_error(ps->pwrite, "storefile: OOM"); |
| safecat(pf->name, sizeof pf->name, 0, ps->wname); |
| pf->id = id; |
| pf->data = ps->new; |
| pf->datacount = ps->writepos; |
| ps->new.prev = NULL; |
| ps->writepos = 0; |
| pf->palette = ps->palette; |
| pf->npalette = ps->npalette; |
| ps->palette = 0; |
| ps->npalette = 0; |
| |
| /* And save it. */ |
| pf->next = ps->saved; |
| ps->saved = pf; |
| } |
| |
| /* Generate an error message (in the given buffer) */ |
| static size_t |
| store_message(png_store *ps, png_const_structp pp, char *buffer, size_t bufsize, |
| size_t pos, PNG_CONST char *msg) |
| { |
| if (pp != NULL && pp == ps->pread) |
| { |
| /* Reading a file */ |
| pos = safecat(buffer, bufsize, pos, "read: "); |
| |
| if (ps->current != NULL) |
| { |
| pos = safecat(buffer, bufsize, pos, ps->current->name); |
| pos = safecat(buffer, bufsize, pos, sep); |
| } |
| } |
| |
| else if (pp != NULL && pp == ps->pwrite) |
| { |
| /* Writing a file */ |
| pos = safecat(buffer, bufsize, pos, "write: "); |
| pos = safecat(buffer, bufsize, pos, ps->wname); |
| pos = safecat(buffer, bufsize, pos, sep); |
| } |
| |
| else |
| { |
| /* Neither reading nor writing (or a memory error in struct delete) */ |
| pos = safecat(buffer, bufsize, pos, "pngvalid: "); |
| } |
| |
| if (ps->test[0] != 0) |
| { |
| pos = safecat(buffer, bufsize, pos, ps->test); |
| pos = safecat(buffer, bufsize, pos, sep); |
| } |
| pos = safecat(buffer, bufsize, pos, msg); |
| return pos; |
| } |
| |
| /* Verbose output to the error stream: */ |
| static void |
| store_verbose(png_store *ps, png_const_structp pp, png_const_charp prefix, |
| png_const_charp message) |
| { |
| char buffer[512]; |
| |
| if (prefix) |
| fputs(prefix, stderr); |
| |
| (void)store_message(ps, pp, buffer, sizeof buffer, 0, message); |
| fputs(buffer, stderr); |
| fputc('\n', stderr); |
| } |
| |
| /* Log an error or warning - the relevant count is always incremented. */ |
| static void |
| store_log(png_store* ps, png_const_structp pp, png_const_charp message, |
| int is_error) |
| { |
| /* The warning is copied to the error buffer if there are no errors and it is |
| * the first warning. The error is copied to the error buffer if it is the |
| * first error (overwriting any prior warnings). |
| */ |
| if (is_error ? (ps->nerrors)++ == 0 : |
| (ps->nwarnings)++ == 0 && ps->nerrors == 0) |
| store_message(ps, pp, ps->error, sizeof ps->error, 0, message); |
| |
| if (ps->verbose) |
| store_verbose(ps, pp, is_error ? "error: " : "warning: ", message); |
| } |
| |
| /* Internal error function, called with a png_store but no libpng stuff. */ |
| static void |
| internal_error(png_store *ps, png_const_charp message) |
| { |
| store_log(ps, NULL, message, 1 /* error */); |
| |
| /* And finally throw an exception. */ |
| { |
| struct exception_context *the_exception_context = &ps->exception_context; |
| Throw ps; |
| } |
| } |
| |
| /* Functions to use as PNG callbacks. */ |
| static void |
| store_error(png_structp ppIn, png_const_charp message) /* PNG_NORETURN */ |
| { |
| png_const_structp pp = ppIn; |
| png_store *ps = voidcast(png_store*, png_get_error_ptr(pp)); |
| |
| if (!ps->expect_error) |
| store_log(ps, pp, message, 1 /* error */); |
| |
| /* And finally throw an exception. */ |
| { |
| struct exception_context *the_exception_context = &ps->exception_context; |
| Throw ps; |
| } |
| } |
| |
| static void |
| store_warning(png_structp ppIn, png_const_charp message) |
| { |
| png_const_structp pp = ppIn; |
| png_store *ps = voidcast(png_store*, png_get_error_ptr(pp)); |
| |
| if (!ps->expect_warning) |
| store_log(ps, pp, message, 0 /* warning */); |
| else |
| ps->saw_warning = 1; |
| } |
| |
| /* These somewhat odd functions are used when reading an image to ensure that |
| * the buffer is big enough, the png_structp is for errors. |
| */ |
| /* Return a single row from the correct image. */ |
| static png_bytep |
| store_image_row(PNG_CONST png_store* ps, png_const_structp pp, int nImage, |
| png_uint_32 y) |
| { |
| png_size_t coffset = (nImage * ps->image_h + y) * (ps->cb_row + 5) + 2; |
| |
| if (ps->image == NULL) |
| png_error(pp, "no allocated image"); |
| |
| if (coffset + ps->cb_row + 3 > ps->cb_image) |
| png_error(pp, "image too small"); |
| |
| return ps->image + coffset; |
| } |
| |
| static void |
| store_image_free(png_store *ps, png_const_structp pp) |
| { |
| if (ps->image != NULL) |
| { |
| png_bytep image = ps->image; |
| |
| if (image[-1] != 0xed || image[ps->cb_image] != 0xfe) |
| { |
| if (pp != NULL) |
| png_error(pp, "png_store image overwrite (1)"); |
| else |
| store_log(ps, NULL, "png_store image overwrite (2)", 1); |
| } |
| |
| ps->image = NULL; |
| ps->cb_image = 0; |
| --image; |
| free(image); |
| } |
| } |
| |
| static void |
| store_ensure_image(png_store *ps, png_const_structp pp, int nImages, |
| png_size_t cbRow, png_uint_32 cRows) |
| { |
| png_size_t cb = nImages * cRows * (cbRow + 5); |
| |
| if (ps->cb_image < cb) |
| { |
| png_bytep image; |
| |
| store_image_free(ps, pp); |
| |
| /* The buffer is deliberately mis-aligned. */ |
| image = voidcast(png_bytep, malloc(cb+2)); |
| if (image == NULL) |
| { |
| /* Called from the startup - ignore the error for the moment. */ |
| if (pp == NULL) |
| return; |
| |
| png_error(pp, "OOM allocating image buffer"); |
| } |
| |
| /* These magic tags are used to detect overwrites above. */ |
| ++image; |
| image[-1] = 0xed; |
| image[cb] = 0xfe; |
| |
| ps->image = image; |
| ps->cb_image = cb; |
| } |
| |
| /* We have an adequate sized image; lay out the rows. There are 2 bytes at |
| * the start and three at the end of each (this ensures that the row |
| * alignment starts out odd - 2+1 and changes for larger images on each row.) |
| */ |
| ps->cb_row = cbRow; |
| ps->image_h = cRows; |
| |
| /* For error checking, the whole buffer is set to 10110010 (0xb2 - 178). |
| * This deliberately doesn't match the bits in the size test image which are |
| * outside the image; these are set to 0xff (all 1). To make the row |
| * comparison work in the 'size' test case the size rows are pre-initialized |
| * to the same value prior to calling 'standard_row'. |
| */ |
| memset(ps->image, 178, cb); |
| |
| /* Then put in the marks. */ |
| while (--nImages >= 0) |
| { |
| png_uint_32 y; |
| |
| for (y=0; y<cRows; ++y) |
| { |
| png_bytep row = store_image_row(ps, pp, nImages, y); |
| |
| /* The markers: */ |
| row[-2] = 190; |
| row[-1] = 239; |
| row[cbRow] = 222; |
| row[cbRow+1] = 173; |
| row[cbRow+2] = 17; |
| } |
| } |
| } |
| |
| static void |
| store_image_check(PNG_CONST png_store* ps, png_const_structp pp, int iImage) |
| { |
| png_const_bytep image = ps->image; |
| |
| if (image[-1] != 0xed || image[ps->cb_image] != 0xfe) |
| png_error(pp, "image overwrite"); |
| else |
| { |
| png_size_t cbRow = ps->cb_row; |
| png_uint_32 rows = ps->image_h; |
| |
| image += iImage * (cbRow+5) * ps->image_h; |
| |
| image += 2; /* skip image first row markers */ |
| |
| while (rows-- > 0) |
| { |
| if (image[-2] != 190 || image[-1] != 239) |
| png_error(pp, "row start overwritten"); |
| |
| if (image[cbRow] != 222 || image[cbRow+1] != 173 || |
| image[cbRow+2] != 17) |
| png_error(pp, "row end overwritten"); |
| |
| image += cbRow+5; |
| } |
| } |
| } |
| |
| static void |
| store_write(png_structp ppIn, png_bytep pb, png_size_t st) |
| { |
| png_const_structp pp = ppIn; |
| png_store *ps = voidcast(png_store*, png_get_io_ptr(pp)); |
| |
| if (ps->pwrite != pp) |
| png_error(pp, "store state damaged"); |
| |
| while (st > 0) |
| { |
| size_t cb; |
| |
| if (ps->writepos >= STORE_BUFFER_SIZE) |
| store_storenew(ps); |
| |
| cb = st; |
| |
| if (cb > STORE_BUFFER_SIZE - ps->writepos) |
| cb = STORE_BUFFER_SIZE - ps->writepos; |
| |
| memcpy(ps->new.buffer + ps->writepos, pb, cb); |
| pb += cb; |
| st -= cb; |
| ps->writepos += cb; |
| } |
| } |
| |
| static void |
| store_flush(png_structp ppIn) |
| { |
| UNUSED(ppIn) /*DOES NOTHING*/ |
| } |
| |
| static size_t |
| store_read_buffer_size(png_store *ps) |
| { |
| /* Return the bytes available for read in the current buffer. */ |
| if (ps->next != &ps->current->data) |
| return STORE_BUFFER_SIZE; |
| |
| return ps->current->datacount; |
| } |
| |
| #ifdef PNG_READ_TRANSFORMS_SUPPORTED |
| /* Return total bytes available for read. */ |
| static size_t |
| store_read_buffer_avail(png_store *ps) |
| { |
| if (ps->current != NULL && ps->next != NULL) |
| { |
| png_store_buffer *next = &ps->current->data; |
| size_t cbAvail = ps->current->datacount; |
| |
| while (next != ps->next && next != NULL) |
| { |
| next = next->prev; |
| cbAvail += STORE_BUFFER_SIZE; |
| } |
| |
| if (next != ps->next) |
| png_error(ps->pread, "buffer read error"); |
| |
| if (cbAvail > ps->readpos) |
| return cbAvail - ps->readpos; |
| } |
| |
| return 0; |
| } |
| #endif |
| |
| static int |
| store_read_buffer_next(png_store *ps) |
| { |
| png_store_buffer *pbOld = ps->next; |
| png_store_buffer *pbNew = &ps->current->data; |
| if (pbOld != pbNew) |
| { |
| while (pbNew != NULL && pbNew->prev != pbOld) |
| pbNew = pbNew->prev; |
| |
| if (pbNew != NULL) |
| { |
| ps->next = pbNew; |
| ps->readpos = 0; |
| return 1; |
| } |
| |
| png_error(ps->pread, "buffer lost"); |
| } |
| |
| return 0; /* EOF or error */ |
| } |
| |
| /* Need separate implementation and callback to allow use of the same code |
| * during progressive read, where the io_ptr is set internally by libpng. |
| */ |
| static void |
| store_read_imp(png_store *ps, png_bytep pb, png_size_t st) |
| { |
| if (ps->current == NULL || ps->next == NULL) |
| png_error(ps->pread, "store state damaged"); |
| |
| while (st > 0) |
| { |
| size_t cbAvail = store_read_buffer_size(ps) - ps->readpos; |
| |
| if (cbAvail > 0) |
| { |
| if (cbAvail > st) cbAvail = st; |
| memcpy(pb, ps->next->buffer + ps->readpos, cbAvail); |
| st -= cbAvail; |
| pb += cbAvail; |
| ps->readpos += cbAvail; |
| } |
| |
| else if (!store_read_buffer_next(ps)) |
| png_error(ps->pread, "read beyond end of file"); |
| } |
| } |
| |
| static void |
| store_read(png_structp ppIn, png_bytep pb, png_size_t st) |
| { |
| png_const_structp pp = ppIn; |
| png_store *ps = voidcast(png_store*, png_get_io_ptr(pp)); |
| |
| if (ps == NULL || ps->pread != pp) |
| png_error(pp, "bad store read call"); |
| |
| store_read_imp(ps, pb, st); |
| } |
| |
| static void |
| store_progressive_read(png_store *ps, png_structp pp, png_infop pi) |
| { |
| /* Notice that a call to store_read will cause this function to fail because |
| * readpos will be set. |
| */ |
| if (ps->pread != pp || ps->current == NULL || ps->next == NULL) |
| png_error(pp, "store state damaged (progressive)"); |
| |
| do |
| { |
| if (ps->readpos != 0) |
| png_error(pp, "store_read called during progressive read"); |
| |
| png_process_data(pp, pi, ps->next->buffer, store_read_buffer_size(ps)); |
| } |
| while (store_read_buffer_next(ps)); |
| } |
| |
| /* The caller must fill this in: */ |
| static store_palette_entry * |
| store_write_palette(png_store *ps, int npalette) |
| { |
| if (ps->pwrite == NULL) |
| store_log(ps, NULL, "attempt to write palette without write stream", 1); |
| |
| if (ps->palette != NULL) |
| png_error(ps->pwrite, "multiple store_write_palette calls"); |
| |
| /* This function can only return NULL if called with '0'! */ |
| if (npalette > 0) |
| { |
| ps->palette = voidcast(store_palette_entry*, malloc(npalette * |
| sizeof *ps->palette)); |
| |
| if (ps->palette == NULL) |
| png_error(ps->pwrite, "store new palette: OOM"); |
| |
| ps->npalette = npalette; |
| } |
| |
| return ps->palette; |
| } |
| |
| static store_palette_entry * |
| store_current_palette(png_store *ps, int *npalette) |
| { |
| /* This is an internal error (the call has been made outside a read |
| * operation.) |
| */ |
| if (ps->current == NULL) |
| store_log(ps, ps->pread, "no current stream for palette", 1); |
| |
| /* The result may be null if there is no palette. */ |
| *npalette = ps->current->npalette; |
| return ps->current->palette; |
| } |
| |
| /***************************** MEMORY MANAGEMENT*** ***************************/ |
| /* A store_memory is simply the header for an allocated block of memory. The |
| * pointer returned to libpng is just after the end of the header block, the |
| * allocated memory is followed by a second copy of the 'mark'. |
| */ |
| typedef struct store_memory |
| { |
| store_pool *pool; /* Originating pool */ |
| struct store_memory *next; /* Singly linked list */ |
| png_alloc_size_t size; /* Size of memory allocated */ |
| png_byte mark[4]; /* ID marker */ |
| } store_memory; |
| |
| /* Handle a fatal error in memory allocation. This calls png_error if the |
| * libpng struct is non-NULL, else it outputs a message and returns. This means |
| * that a memory problem while libpng is running will abort (png_error) the |
| * handling of particular file while one in cleanup (after the destroy of the |
| * struct has returned) will simply keep going and free (or attempt to free) |
| * all the memory. |
| */ |
| static void |
| store_pool_error(png_store *ps, png_const_structp pp, PNG_CONST char *msg) |
| { |
| if (pp != NULL) |
| png_error(pp, msg); |
| |
| /* Else we have to do it ourselves. png_error eventually calls store_log, |
| * above. store_log accepts a NULL png_structp - it just changes what gets |
| * output by store_message. |
| */ |
| store_log(ps, pp, msg, 1 /* error */); |
| } |
| |
| static void |
| store_memory_free(png_const_structp pp, store_pool *pool, store_memory *memory) |
| { |
| /* Note that pp may be NULL (see store_pool_delete below), the caller has |
| * found 'memory' in pool->list *and* unlinked this entry, so this is a valid |
| * pointer (for sure), but the contents may have been trashed. |
| */ |
| if (memory->pool != pool) |
| store_pool_error(pool->store, pp, "memory corrupted (pool)"); |
| |
| else if (memcmp(memory->mark, pool->mark, sizeof memory->mark) != 0) |
| store_pool_error(pool->store, pp, "memory corrupted (start)"); |
| |
| /* It should be safe to read the size field now. */ |
| else |
| { |
| png_alloc_size_t cb = memory->size; |
| |
| if (cb > pool->max) |
| store_pool_error(pool->store, pp, "memory corrupted (size)"); |
| |
| else if (memcmp((png_bytep)(memory+1)+cb, pool->mark, sizeof pool->mark) |
| != 0) |
| store_pool_error(pool->store, pp, "memory corrupted (end)"); |
| |
| /* Finally give the library a chance to find problems too: */ |
| else |
| { |
| pool->current -= cb; |
| free(memory); |
| } |
| } |
| } |
| |
| static void |
| store_pool_delete(png_store *ps, store_pool *pool) |
| { |
| if (pool->list != NULL) |
| { |
| fprintf(stderr, "%s: %s %s: memory lost (list follows):\n", ps->test, |
| pool == &ps->read_memory_pool ? "read" : "write", |
| pool == &ps->read_memory_pool ? (ps->current != NULL ? |
| ps->current->name : "unknown file") : ps->wname); |
| ++ps->nerrors; |
| |
| do |
| { |
| store_memory *next = pool->list; |
| pool->list = next->next; |
| next->next = NULL; |
| |
| fprintf(stderr, "\t%lu bytes @ %p\n", |
| (unsigned long)next->size, (PNG_CONST void*)(next+1)); |
| /* The NULL means this will always return, even if the memory is |
| * corrupted. |
| */ |
| store_memory_free(NULL, pool, next); |
| } |
| while (pool->list != NULL); |
| } |
| |
| /* And reset the other fields too for the next time. */ |
| if (pool->max > pool->max_max) pool->max_max = pool->max; |
| pool->max = 0; |
| if (pool->current != 0) /* unexpected internal error */ |
| fprintf(stderr, "%s: %s %s: memory counter mismatch (internal error)\n", |
| ps->test, pool == &ps->read_memory_pool ? "read" : "write", |
| pool == &ps->read_memory_pool ? (ps->current != NULL ? |
| ps->current->name : "unknown file") : ps->wname); |
| pool->current = 0; |
| |
| if (pool->limit > pool->max_limit) |
| pool->max_limit = pool->limit; |
| |
| pool->limit = 0; |
| |
| if (pool->total > pool->max_total) |
| pool->max_total = pool->total; |
| |
| pool->total = 0; |
| |
| /* Get a new mark too. */ |
| store_pool_mark(pool->mark); |
| } |
| |
| /* The memory callbacks: */ |
| static png_voidp |
| store_malloc(png_structp ppIn, png_alloc_size_t cb) |
| { |
| png_const_structp pp = ppIn; |
| store_pool *pool = voidcast(store_pool*, png_get_mem_ptr(pp)); |
| store_memory *new = voidcast(store_memory*, malloc(cb + (sizeof *new) + |
| (sizeof pool->mark))); |
| |
| if (new != NULL) |
| { |
| if (cb > pool->max) |
| pool->max = cb; |
| |
| pool->current += cb; |
| |
| if (pool->current > pool->limit) |
| pool->limit = pool->current; |
| |
| pool->total += cb; |
| |
| new->size = cb; |
| memcpy(new->mark, pool->mark, sizeof new->mark); |
| memcpy((png_byte*)(new+1) + cb, pool->mark, sizeof pool->mark); |
| new->pool = pool; |
| new->next = pool->list; |
| pool->list = new; |
| ++new; |
| } |
| |
| else |
| { |
| /* NOTE: the PNG user malloc function cannot use the png_ptr it is passed |
| * other than to retrieve the allocation pointer! libpng calls the |
| * store_malloc callback in two basic cases: |
| * |
| * 1) From png_malloc; png_malloc will do a png_error itself if NULL is |
| * returned. |
| * 2) From png_struct or png_info structure creation; png_malloc is |
| * to return so cleanup can be performed. |
| * |
| * To handle this store_malloc can log a message, but can't do anything |
| * else. |
| */ |
| store_log(pool->store, pp, "out of memory", 1 /* is_error */); |
| } |
| |
| return new; |
| } |
| |
| static void |
| store_free(png_structp ppIn, png_voidp memory) |
| { |
| png_const_structp pp = ppIn; |
| store_pool *pool = voidcast(store_pool*, png_get_mem_ptr(pp)); |
| store_memory *this = voidcast(store_memory*, memory), **test; |
| |
| /* Because libpng calls store_free with a dummy png_struct when deleting |
| * png_struct or png_info via png_destroy_struct_2 it is necessary to check |
| * the passed in png_structp to ensure it is valid, and not pass it to |
| * png_error if it is not. |
| */ |
| if (pp != pool->store->pread && pp != pool->store->pwrite) |
| pp = NULL; |
| |
| /* First check that this 'memory' really is valid memory - it must be in the |
| * pool list. If it is, use the shared memory_free function to free it. |
| */ |
| --this; |
| for (test = &pool->list; *test != this; test = &(*test)->next) |
| { |
| if (*test == NULL) |
| { |
| store_pool_error(pool->store, pp, "bad pointer to free"); |
| return; |
| } |
| } |
| |
| /* Unlink this entry, *test == this. */ |
| *test = this->next; |
| this->next = NULL; |
| store_memory_free(pp, pool, this); |
| } |
| |
| /* Setup functions. */ |
| /* Cleanup when aborting a write or after storing the new file. */ |
| static void |
| store_write_reset(png_store *ps) |
| { |
| if (ps->pwrite != NULL) |
| { |
| anon_context(ps); |
| |
| Try |
| png_destroy_write_struct(&ps->pwrite, &ps->piwrite); |
| |
| Catch_anonymous |
| { |
| /* memory corruption: continue. */ |
| } |
| |
| ps->pwrite = NULL; |
| ps->piwrite = NULL; |
| } |
| |
| /* And make sure that all the memory has been freed - this will output |
| * spurious errors in the case of memory corruption above, but this is safe. |
| */ |
| store_pool_delete(ps, &ps->write_memory_pool); |
| |
| store_freenew(ps); |
| } |
| |
| /* The following is the main write function, it returns a png_struct and, |
| * optionally, a png_info suitable for writiing a new PNG file. Use |
| * store_storefile above to record this file after it has been written. The |
| * returned libpng structures as destroyed by store_write_reset above. |
| */ |
| static png_structp |
| set_store_for_write(png_store *ps, png_infopp ppi, |
| PNG_CONST char * volatile name) |
| { |
| anon_context(ps); |
| |
| Try |
| { |
| if (ps->pwrite != NULL) |
| png_error(ps->pwrite, "write store already in use"); |
| |
| store_write_reset(ps); |
| safecat(ps->wname, sizeof ps->wname, 0, name); |
| |
| /* Don't do the slow memory checks if doing a speed test. */ |
| if (ps->speed) |
| ps->pwrite = png_create_write_struct(PNG_LIBPNG_VER_STRING, |
| ps, store_error, store_warning); |
| |
| else |
| ps->pwrite = png_create_write_struct_2(PNG_LIBPNG_VER_STRING, |
| ps, store_error, store_warning, &ps->write_memory_pool, |
| store_malloc, store_free); |
| |
| png_set_write_fn(ps->pwrite, ps, store_write, store_flush); |
| |
| if (ppi != NULL) |
| *ppi = ps->piwrite = png_create_info_struct(ps->pwrite); |
| } |
| |
| Catch_anonymous |
| return NULL; |
| |
| return ps->pwrite; |
| } |
| |
| /* Cleanup when finished reading (either due to error or in the success case). |
| */ |
| static void |
| store_read_reset(png_store *ps) |
| { |
| if (ps->pread != NULL) |
| { |
| anon_context(ps); |
| |
| Try |
| png_destroy_read_struct(&ps->pread, &ps->piread, NULL); |
| |
| Catch_anonymous |
| { |
| /* error already output: continue */ |
| } |
| |
| ps->pread = NULL; |
| ps->piread = NULL; |
| } |
| |
| /* Always do this to be safe. */ |
| store_pool_delete(ps, &ps->read_memory_pool); |
| |
| ps->current = NULL; |
| ps->next = NULL; |
| ps->readpos = 0; |
| ps->validated = 0; |
| } |
| |
| static void |
| store_read_set(png_store *ps, png_uint_32 id) |
| { |
| png_store_file *pf = ps->saved; |
| |
| while (pf != NULL) |
| { |
| if (pf->id == id) |
| { |
| ps->current = pf; |
| ps->next = NULL; |
| store_read_buffer_next(ps); |
| return; |
| } |
| |
| pf = pf->next; |
| } |
| |
| { |
| size_t pos; |
| char msg[FILE_NAME_SIZE+64]; |
| |
| pos = standard_name_from_id(msg, sizeof msg, 0, id); |
| pos = safecat(msg, sizeof msg, pos, ": file not found"); |
| png_error(ps->pread, msg); |
| } |
| } |
| |
| /* The main interface for reading a saved file - pass the id number of the file |
| * to retrieve. Ids must be unique or the earlier file will be hidden. The API |
| * returns a png_struct and, optionally, a png_info. Both of these will be |
| * destroyed by store_read_reset above. |
| */ |
| static png_structp |
| set_store_for_read(png_store *ps, png_infopp ppi, png_uint_32 id, |
| PNG_CONST char *name) |
| { |
| /* Set the name for png_error */ |
| safecat(ps->test, sizeof ps->test, 0, name); |
| |
| if (ps->pread != NULL) |
| png_error(ps->pread, "read store already in use"); |
| |
| store_read_reset(ps); |
| |
| /* Both the create APIs can return NULL if used in their default mode |
| * (because there is no other way of handling an error because the jmp_buf |
| * by default is stored in png_struct and that has not been allocated!) |
| * However, given that store_error works correctly in these circumstances |
| * we don't ever expect NULL in this program. |
| */ |
| if (ps->speed) |
| ps->pread = png_create_read_struct(PNG_LIBPNG_VER_STRING, ps, |
| store_error, store_warning); |
| |
| else |
| ps->pread = png_create_read_struct_2(PNG_LIBPNG_VER_STRING, ps, |
| store_error, store_warning, &ps->read_memory_pool, store_malloc, |
| store_free); |
| |
| if (ps->pread == NULL) |
| { |
| struct exception_context *the_exception_context = &ps->exception_context; |
| |
| store_log(ps, NULL, "png_create_read_struct returned NULL (unexpected)", |
| 1 /*error*/); |
| |
| Throw ps; |
| } |
| |
| store_read_set(ps, id); |
| |
| if (ppi != NULL) |
| *ppi = ps->piread = png_create_info_struct(ps->pread); |
| |
| return ps->pread; |
| } |
| |
| /* The overall cleanup of a store simply calls the above then removes all the |
| * saved files. This does not delete the store itself. |
| */ |
| static void |
| store_delete(png_store *ps) |
| { |
| store_write_reset(ps); |
| store_read_reset(ps); |
| store_freefile(&ps->saved); |
| store_image_free(ps, NULL); |
| } |
| |
| /*********************** PNG FILE MODIFICATION ON READ ************************/ |
| /* Files may be modified on read. The following structure contains a complete |
| * png_store together with extra members to handle modification and a special |
| * read callback for libpng. To use this the 'modifications' field must be set |
| * to a list of png_modification structures that actually perform the |
| * modification, otherwise a png_modifier is functionally equivalent to a |
| * png_store. There is a special read function, set_modifier_for_read, which |
| * replaces set_store_for_read. |
| */ |
| typedef enum modifier_state |
| { |
| modifier_start, /* Initial value */ |
| modifier_signature, /* Have a signature */ |
| modifier_IHDR /* Have an IHDR */ |
| } modifier_state; |
| |
| typedef struct CIE_color |
| { |
| /* A single CIE tristimulus value, representing the unique response of a |
| * standard observer to a variety of light spectra. The observer recognizes |
| * all spectra that produce this response as the same color, therefore this |
| * is effectively a description of a color. |
| */ |
| double X, Y, Z; |
| } CIE_color; |
| |
| static double |
| chromaticity_x(CIE_color c) |
| { |
| return c.X / (c.X + c.Y + c.Z); |
| } |
| |
| static double |
| chromaticity_y(CIE_color c) |
| { |
| return c.Y / (c.X + c.Y + c.Z); |
| } |
| |
| typedef struct color_encoding |
| { |
| /* A description of an (R,G,B) encoding of color (as defined above); this |
| * includes the actual colors of the (R,G,B) triples (1,0,0), (0,1,0) and |
| * (0,0,1) plus an encoding value that is used to encode the linear |
| * components R, G and B to give the actual values R^gamma, G^gamma and |
| * B^gamma that are stored. |
| */ |
| double gamma; /* Encoding (file) gamma of space */ |
| CIE_color red, green, blue; /* End points */ |
| } color_encoding; |
| |
| static CIE_color |
| white_point(PNG_CONST color_encoding *encoding) |
| { |
| CIE_color white; |
| |
| white.X = encoding->red.X + encoding->green.X + encoding->blue.X; |
| white.Y = encoding->red.Y + encoding->green.Y + encoding->blue.Y; |
| white.Z = encoding->red.Z + encoding->green.Z + encoding->blue.Z; |
| |
| return white; |
| } |
| |
| static void |
| normalize_color_encoding(color_encoding *encoding) |
| { |
| PNG_CONST double whiteY = encoding->red.Y + encoding->green.Y + |
| encoding->blue.Y; |
| |
| if (whiteY != 1) |
| { |
| encoding->red.X /= whiteY; |
| encoding->red.Y /= whiteY; |
| encoding->red.Z /= whiteY; |
| encoding->green.X /= whiteY; |
| encoding->green.Y /= whiteY; |
| encoding->green.Z /= whiteY; |
| encoding->blue.X /= whiteY; |
| encoding->blue.Y /= whiteY; |
| encoding->blue.Z /= whiteY; |
| } |
| } |
| |
| static size_t |
| safecat_color_encoding(char *buffer, size_t bufsize, size_t pos, |
| PNG_CONST color_encoding *e, double encoding_gamma) |
| { |
| if (e != 0) |
| { |
| if (encoding_gamma != 0) |
| pos = safecat(buffer, bufsize, pos, "("); |
| pos = safecat(buffer, bufsize, pos, "R("); |
| pos = safecatd(buffer, bufsize, pos, e->red.X, 4); |
| pos = safecat(buffer, bufsize, pos, ","); |
| pos = safecatd(buffer, bufsize, pos, e->red.Y, 4); |
| pos = safecat(buffer, bufsize, pos, ","); |
| pos = safecatd(buffer, bufsize, pos, e->red.Z, 4); |
| pos = safecat(buffer, bufsize, pos, "),G("); |
| pos = safecatd(buffer, bufsize, pos, e->green.X, 4); |
| pos = safecat(buffer, bufsize, pos, ","); |
| pos = safecatd(buffer, bufsize, pos, e->green.Y, 4); |
| pos = safecat(buffer, bufsize, pos, ","); |
| pos = safecatd(buffer, bufsize, pos, e->green.Z, 4); |
| pos = safecat(buffer, bufsize, pos, "),B("); |
| pos = safecatd(buffer, bufsize, pos, e->blue.X, 4); |
| pos = safecat(buffer, bufsize, pos, ","); |
| pos = safecatd(buffer, bufsize, pos, e->blue.Y, 4); |
| pos = safecat(buffer, bufsize, pos, ","); |
| pos = safecatd(buffer, bufsize, pos, e->blue.Z, 4); |
| pos = safecat(buffer, bufsize, pos, ")"); |
| if (encoding_gamma != 0) |
| pos = safecat(buffer, bufsize, pos, ")"); |
| } |
| |
| if (encoding_gamma != 0) |
| { |
| pos = safecat(buffer, bufsize, pos, "^"); |
| pos = safecatd(buffer, bufsize, pos, encoding_gamma, 5); |
| } |
| |
| return pos; |
| } |
| |
| typedef struct png_modifier |
| { |
| png_store this; /* I am a png_store */ |
| struct png_modification *modifications; /* Changes to make */ |
| |
| modifier_state state; /* My state */ |
| |
| /* Information from IHDR: */ |
| png_byte bit_depth; /* From IHDR */ |
| png_byte colour_type; /* From IHDR */ |
| |
| /* While handling PLTE, IDAT and IEND these chunks may be pended to allow |
| * other chunks to be inserted. |
| */ |
| png_uint_32 pending_len; |
| png_uint_32 pending_chunk; |
| |
| /* Test values */ |
| double *gammas; |
| unsigned int ngammas; |
| unsigned int ngamma_tests; /* Number of gamma tests to run*/ |
| double current_gamma; /* 0 if not set */ |
| PNG_CONST color_encoding *encodings; |
| unsigned int nencodings; |
| PNG_CONST color_encoding *current_encoding; /* If an encoding has been set */ |
| unsigned int encoding_counter; /* For iteration */ |
| int encoding_ignored; /* Something overwrote it */ |
| |
| /* Control variables used to iterate through possible encodings, the |
| * following must be set to 0 and tested by the function that uses the |
| * png_modifier because the modifier only sets it to 1 (true.) |
| */ |
| unsigned int repeat :1; /* Repeat this transform test. */ |
| unsigned int test_uses_encoding :1; |
| |
| /* Lowest sbit to test (libpng fails for sbit < 8) */ |
| png_byte sbitlow; |
| |
| /* Error control - these are the limits on errors accepted by the gamma tests |
| * below. |
| */ |
| double maxout8; /* Maximum output value error */ |
| double maxabs8; /* Absolute sample error 0..1 */ |
| double maxcalc8; /* Absolute sample error 0..1 */ |
| double maxpc8; /* Percentage sample error 0..100% */ |
| double maxout16; /* Maximum output value error */ |
| double maxabs16; /* Absolute sample error 0..1 */ |
| double maxcalc16;/* Absolute sample error 0..1 */ |
| double maxpc16; /* Percentage sample error 0..100% */ |
| |
| /* This is set by transforms that need to allow a higher limit, it is an |
| * internal check on pngvalid to ensure that the calculated error limits are |
| * not ridiculous; without this it is too easy to make a mistake in pngvalid |
| * that allows any value through. |
| */ |
| double limit; /* limit on error values, normally 4E-3 */ |
| |
| /* Log limits - values above this are logged, but not necessarily |
| * warned. |
| */ |
| double log8; /* Absolute error in 8 bits to log */ |
| double log16; /* Absolute error in 16 bits to log */ |
| |
| /* Logged 8 and 16 bit errors ('output' values): */ |
| double error_gray_2; |
| double error_gray_4; |
| double error_gray_8; |
| double error_gray_16; |
| double error_color_8; |
| double error_color_16; |
| double error_indexed; |
| |
| /* Flags: */ |
| /* Whether to call png_read_update_info, not png_read_start_image, and how |
| * many times to call it. |
| */ |
| int use_update_info; |
| |
| /* Whether or not to interlace. */ |
| int interlace_type :9; /* int, but must store '1' */ |
| |
| /* Run the standard tests? */ |
| unsigned int test_standard :1; |
| |
| /* Run the odd-sized image and interlace read/write tests? */ |
| unsigned int test_size :1; |
| |
| /* Run tests on reading with a combiniation of transforms, */ |
| unsigned int test_transform :1; |
| |
| /* When to use the use_input_precision option: */ |
| unsigned int use_input_precision :1; |
| unsigned int use_input_precision_sbit :1; |
| unsigned int use_input_precision_16to8 :1; |
| |
| /* If set assume that the calculation bit depth is set by the input |
| * precision, not the output precision. |
| */ |
| unsigned int calculations_use_input_precision :1; |
| |
| /* If set assume that the calculations are done in 16 bits even if both input |
| * and output are 8 bit or less. |
| */ |
| unsigned int assume_16_bit_calculations :1; |
| |
| /* Which gamma tests to run: */ |
| unsigned int test_gamma_threshold :1; |
| unsigned int test_gamma_transform :1; /* main tests */ |
| unsigned int test_gamma_sbit :1; |
| unsigned int test_gamma_scale16 :1; |
| unsigned int test_gamma_background :1; |
| unsigned int test_gamma_alpha_mode :1; |
| unsigned int test_gamma_expand16 :1; |
| unsigned int test_exhaustive :1; |
| |
| unsigned int log :1; /* Log max error */ |
| |
| /* Buffer information, the buffer size limits the size of the chunks that can |
| * be modified - they must fit (including header and CRC) into the buffer! |
| */ |
| size_t flush; /* Count of bytes to flush */ |
| size_t buffer_count; /* Bytes in buffer */ |
| size_t buffer_position; /* Position in buffer */ |
| png_byte buffer[1024]; |
| } png_modifier; |
| |
| /* This returns true if the test should be stopped now because it has already |
| * failed and it is running silently. |
| */ |
| static int fail(png_modifier *pm) |
| { |
| return !pm->log && !pm->this.verbose && (pm->this.nerrors > 0 || |
| (pm->this.treat_warnings_as_errors && pm->this.nwarnings > 0)); |
| } |
| |
| static void |
| modifier_init(png_modifier *pm) |
| { |
| memset(pm, 0, sizeof *pm); |
| store_init(&pm->this); |
| pm->modifications = NULL; |
| pm->state = modifier_start; |
| pm->sbitlow = 1U; |
| pm->ngammas = 0; |
| pm->ngamma_tests = 0; |
| pm->gammas = 0; |
| pm->current_gamma = 0; |
| pm->encodings = 0; |
| pm->nencodings = 0; |
| pm->current_encoding = 0; |
| pm->encoding_counter = 0; |
| pm->encoding_ignored = 0; |
| pm->repeat = 0; |
| pm->test_uses_encoding = 0; |
| pm->maxout8 = pm->maxpc8 = pm->maxabs8 = pm->maxcalc8 = 0; |
| pm->maxout16 = pm->maxpc16 = pm->maxabs16 = pm->maxcalc16 = 0; |
| pm->limit = 4E-3; |
| pm->log8 = pm->log16 = 0; /* Means 'off' */ |
| pm->error_gray_2 = pm->error_gray_4 = pm->error_gray_8 = 0; |
| pm->error_gray_16 = pm->error_color_8 = pm->error_color_16 = 0; |
| pm->error_indexed = 0; |
| pm->use_update_info = 0; |
| pm->interlace_type = PNG_INTERLACE_NONE; |
| pm->test_standard = 0; |
| pm->test_size = 0; |
| pm->test_transform = 0; |
| pm->use_input_precision = 0; |
| pm->use_input_precision_sbit = 0; |
| pm->use_input_precision_16to8 = 0; |
| pm->calculations_use_input_precision = 0; |
| pm->test_gamma_threshold = 0; |
| pm->test_gamma_transform = 0; |
| pm->test_gamma_sbit = 0; |
| pm->test_gamma_scale16 = 0; |
| pm->test_gamma_background = 0; |
| pm->test_gamma_alpha_mode = 0; |
| pm->test_gamma_expand16 = 0; |
| pm->test_exhaustive = 0; |
| pm->log = 0; |
| |
| /* Rely on the memset for all the other fields - there are no pointers */ |
| } |
| |
| #ifdef PNG_READ_TRANSFORMS_SUPPORTED |
| /* If pm->calculations_use_input_precision is set then operations will happen |
| * with only 8 bit precision unless both the input and output bit depth are 16. |
| * |
| * If pm->assume_16_bit_calculations is set then even 8 bit calculations use 16 |
| * bit precision. This only affects those of the following limits that pertain |
| * to a calculation - not a digitization operation - unless the following API is |
| * called directly. |
| */ |
| static double digitize(PNG_CONST png_modifier *pm, double value, |
| int sample_depth, int do_round) |
| { |
| /* 'value' is in the range 0 to 1, the result is the same value rounded to a |
| * multiple of the digitization factor - 8 or 16 bits depending on both the |
| * sample depth and the 'assume' setting. Digitization is normally by |
| * rounding and 'do_round' should be 1, if it is 0 the digitized value will |
| * be truncated. |
| */ |
| PNG_CONST unsigned int digitization_factor = |
| (pm->assume_16_bit_calculations || sample_depth == 16) ? 65535 : 255; |
| |
| /* Limiting the range is done as a convenience to the caller - it's easier to |
| * do it once here than every time at the call site. |
| */ |
| if (value <= 0) |
| value = 0; |
| else if (value >= 1) |
| value = 1; |
| |
| value *= digitization_factor; |
| if (do_round) value += .5; |
| return floor(value)/digitization_factor; |
| } |
| |
| static double abserr(PNG_CONST png_modifier *pm, int in_depth, int out_depth) |
| { |
| /* Absolute error permitted in linear values - affected by the bit depth of |
| * the calculations. |
| */ |
| if (pm->assume_16_bit_calculations || (out_depth == 16 && (in_depth == 16 || |
| !pm->calculations_use_input_precision))) |
| return pm->maxabs16; |
| else |
| return pm->maxabs8; |
| } |
| |
| static double calcerr(PNG_CONST png_modifier *pm, int in_depth, int out_depth) |
| { |
| /* Error in the linear composition arithmetic - only relevant when |
| * composition actually happens (0 < alpha < 1). |
| */ |
| if (pm->assume_16_bit_calculations || (out_depth == 16 && (in_depth == 16 || |
| !pm->calculations_use_input_precision))) |
| return pm->maxcalc16; |
| else |
| return pm->maxcalc8; |
| } |
| |
| static double pcerr(PNG_CONST png_modifier *pm, int in_depth, int out_depth) |
| { |
| /* Percentage error permitted in the linear values. Note that the specified |
| * value is a percentage but this routine returns a simple number. |
| */ |
| if (pm->assume_16_bit_calculations || (out_depth == 16 && (in_depth == 16 || |
| !pm->calculations_use_input_precision))) |
| return pm->maxpc16 * .01; |
| else |
| return pm->maxpc8 * .01; |
| } |
| |
| /* Output error - the error in the encoded value. This is determined by the |
| * digitization of the output so can be +/-0.5 in the actual output value. In |
| * the expand_16 case with the current code in libpng the expand happens after |
| * all the calculations are done in 8 bit arithmetic, so even though the output |
| * depth is 16 the output error is determined by the 8 bit calculation. |
| * |
| * This limit is not determined by the bit depth of internal calculations. |
| * |
| * The specified parameter does *not* include the base .5 digitization error but |
| * it is added here. |
| */ |
| static double outerr(PNG_CONST png_modifier *pm, int in_depth, int out_depth) |
| { |
| /* There is a serious error in the 2 and 4 bit grayscale transform because |
| * the gamma table value (8 bits) is simply shifted, not rounded, so the |
| * error in 4 bit grayscale gamma is up to the value below. This is a hack |
| * to allow pngvalid to succeed: |
| * |
| * TODO: fix this in libpng |
| */ |
| if (out_depth == 2) |
| return .73182-.5; |
| |
| if (out_depth == 4) |
| return .90644-.5; |
| |
| if (out_depth == 16 && (in_depth == 16 || |
| !pm->calculations_use_input_precision)) |
| return pm->maxout16; |
| |
| /* This is the case where the value was calculated at 8-bit precision then |
| * scaled to 16 bits. |
| */ |
| else if (out_depth == 16) |
| return pm->maxout8 * 257; |
| |
| else |
| return pm->maxout8; |
| } |
| |
| /* This does the same thing as the above however it returns the value to log, |
| * rather than raising a warning. This is useful for debugging to track down |
| * exactly what set of parameters cause high error values. |
| */ |
| static double outlog(PNG_CONST png_modifier *pm, int in_depth, int out_depth) |
| { |
| /* The command line parameters are either 8 bit (0..255) or 16 bit (0..65535) |
| * and so must be adjusted for low bit depth grayscale: |
| */ |
| if (out_depth <= 8) |
| { |
| if (pm->log8 == 0) /* switched off */ |
| return 256; |
| |
| if (out_depth < 8) |
| return pm->log8 / 255 * ((1<<out_depth)-1); |
| |
| return pm->log8; |
| } |
| |
| if (out_depth == 16 && (in_depth == 16 || |
| !pm->calculations_use_input_precision)) |
| { |
| if (pm->log16 == 0) |
| return 65536; |
| |
| return pm->log16; |
| } |
| |
| /* This is the case where the value was calculated at 8-bit precision then |
| * scaled to 16 bits. |
| */ |
| if (pm->log8 == 0) |
| return 65536; |
| |
| return pm->log8 * 257; |
| } |
| |
| /* This complements the above by providing the appropriate quantization for the |
| * final value. Normally this would just be quantization to an integral value, |
| * but in the 8 bit calculation case it's actually quantization to a multiple of |
| * 257! |
| */ |
| static int output_quantization_factor(PNG_CONST png_modifier *pm, int in_depth, |
| int out_depth) |
| { |
| if (out_depth == 16 && in_depth != 16 |
| && pm->calculations_use_input_precision) |
| return 257; |
| else |
| return 1; |
| } |
| |
| /* One modification structure must be provided for each chunk to be modified (in |
| * fact more than one can be provided if multiple separate changes are desired |
| * for a single chunk.) Modifications include adding a new chunk when a |
| * suitable chunk does not exist. |
| * |
| * The caller of modify_fn will reset the CRC of the chunk and record 'modified' |
| * or 'added' as appropriate if the modify_fn returns 1 (true). If the |
| * modify_fn is NULL the chunk is simply removed. |
| */ |
| typedef struct png_modification |
| { |
| struct png_modification *next; |
| png_uint_32 chunk; |
| |
| /* If the following is NULL all matching chunks will be removed: */ |
| int (*modify_fn)(struct png_modifier *pm, |
| struct png_modification *me, int add); |
| |
| /* If the following is set to PLTE, IDAT or IEND and the chunk has not been |
| * found and modified (and there is a modify_fn) the modify_fn will be called |
| * to add the chunk before the relevant chunk. |
| */ |
| png_uint_32 add; |
| unsigned int modified :1; /* Chunk was modified */ |
| unsigned int added :1; /* Chunk was added */ |
| unsigned int removed :1; /* Chunk was removed */ |
| } png_modification; |
| |
| static void |
| modification_reset(png_modification *pmm) |
| { |
| if (pmm != NULL) |
| { |
| pmm->modified = 0; |
| pmm->added = 0; |
| pmm->removed = 0; |
| modification_reset(pmm->next); |
| } |
| } |
| |
| static void |
| modification_init(png_modification *pmm) |
| { |
| memset(pmm, 0, sizeof *pmm); |
| pmm->next = NULL; |
| pmm->chunk = 0; |
| pmm->modify_fn = NULL; |
| pmm->add = 0; |
| modification_reset(pmm); |
| } |
| |
| static void |
| modifier_current_encoding(PNG_CONST png_modifier *pm, color_encoding *ce) |
| { |
| if (pm->current_encoding != 0) |
| *ce = *pm->current_encoding; |
| |
| else |
| memset(ce, 0, sizeof *ce); |
| |
| ce->gamma = pm->current_gamma; |
| } |
| |
| static size_t |
| safecat_current_encoding(char *buffer, size_t bufsize, size_t pos, |
| PNG_CONST png_modifier *pm) |
| { |
| pos = safecat_color_encoding(buffer, bufsize, pos, pm->current_encoding, |
| pm->current_gamma); |
| |
| if (pm->encoding_ignored) |
| pos = safecat(buffer, bufsize, pos, "[overridden]"); |
| |
| return pos; |
| } |
| |
| /* Iterate through the usefully testable color encodings. An encoding is one |
| * of: |
| * |
| * 1) Nothing (no color space, no gamma). |
| * 2) Just a gamma value from the gamma array (including 1.0) |
| * 3) A color space from the encodings array with the corresponding gamma. |
| * 4) The same, but with gamma 1.0 (only really useful with 16 bit calculations) |
| * |
| * The iterator selects these in turn, the randomizer selects one at random, |
| * which is used depends on the setting of the 'test_exhaustive' flag. Notice |
| * that this function changes the colour space encoding so it must only be |
| * called on completion of the previous test. This is what 'modifier_reset' |
| * does, below. |
| * |
| * After the function has been called the 'repeat' flag will still be set; the |
| * caller of modifier_reset must reset it at the start of each run of the test! |
| */ |
| static unsigned int |
| modifier_total_encodings(PNG_CONST png_modifier *pm) |
| { |
| return 1 + /* (1) nothing */ |
| pm->ngammas + /* (2) gamma values to test */ |
| pm->nencodings + /* (3) total number of encodings */ |
| /* The following test only works after the first time through the |
| * png_modifier code because 'bit_depth' is set when the IHDR is read. |
| * modifier_reset, below, preserves the setting until after it has called |
| * the iterate function (also below.) |
| * |
| * For this reason do not rely on this function outside a call to |
| * modifier_reset. |
| */ |
| ((pm->bit_depth == 16 || pm->assume_16_bit_calculations) ? |
| pm->nencodings : 0); /* (4) encodings with gamma == 1.0 */ |
| } |
| |
| static void |
| modifier_encoding_iterate(png_modifier *pm) |
| { |
| if (!pm->repeat && /* Else something needs the current encoding again. */ |
| pm->test_uses_encoding) /* Some transform is encoding dependent */ |
| { |
| if (pm->test_exhaustive) |
| { |
| if (++pm->encoding_counter >= modifier_total_encodings(pm)) |
| pm->encoding_counter = 0; /* This will stop the repeat */ |
| } |
| |
| else |
| { |
| /* Not exhaustive - choose an encoding at random; generate a number in |
| * the range 1..(max-1), so the result is always non-zero: |
| */ |
| if (pm->encoding_counter == 0) |
| pm->encoding_counter = random_mod(modifier_total_encodings(pm)-1)+1; |
| else |
| pm->encoding_counter = 0; |
| } |
| |
| if (pm->encoding_counter > 0) |
| pm->repeat = 1; |
| } |
| |
| else if (!pm->repeat) |
| pm->encoding_counter = 0; |
| } |
| |
| static void |
| modifier_reset(png_modifier *pm) |
| { |
| store_read_reset(&pm->this); |
| pm->limit = 4E-3; |
| pm->pending_len = pm->pending_chunk = 0; |
| pm->flush = pm->buffer_count = pm->buffer_position = 0; |
| pm->modifications = NULL; |
| pm->state = modifier_start; |
| modifier_encoding_iterate(pm); |
| /* The following must be set in the next run. In particular |
| * test_uses_encodings must be set in the _ini function of each transform |
| * that looks at the encodings. (Not the 'add' function!) |
| */ |
| pm->test_uses_encoding = 0; |
| pm->current_gamma = 0; |
| pm->current_encoding = 0; |
| pm->encoding_ignored = 0; |
| /* These only become value after IHDR is read: */ |
| pm->bit_depth = pm->colour_type = 0; |
| } |
| |
| /* The following must be called before anything else to get the encoding set up |
| * on the modifier. In particular it must be called before the transform init |
| * functions are called. |
| */ |
| static void |
| modifier_set_encoding(png_modifier *pm) |
| { |
| /* Set the encoding to the one specified by the current encoding counter, |
| * first clear out all the settings - this corresponds to an encoding_counter |
| * of 0. |
| */ |
| pm->current_gamma = 0; |
| pm->current_encoding = 0; |
| pm->encoding_ignored = 0; /* not ignored yet - happens in _ini functions. */ |
| |
| /* Now, if required, set the gamma and encoding fields. */ |
| if (pm->encoding_counter > 0) |
| { |
| /* The gammas[] array is an array of screen gammas, not encoding gammas, |
| * so we need the inverse: |
| */ |
| if (pm->encoding_counter <= pm->ngammas) |
| pm->current_gamma = 1/pm->gammas[pm->encoding_counter-1]; |
| |
| else |
| { |
| unsigned int i = pm->encoding_counter - pm->ngammas; |
| |
| if (i >= pm->nencodings) |
| { |
| i %= pm->nencodings; |
| pm->current_gamma = 1; /* Linear, only in the 16 bit case */ |
| } |
| |
| else |
| pm->current_gamma = pm->encodings[i].gamma; |
| |
| pm->current_encoding = pm->encodings + i; |
| } |
| } |
| } |
| |
| /* Enquiry functions to find out what is set. Notice that there is an implicit |
| * assumption below that the first encoding in the list is the one for sRGB. |
| */ |
| static int |
| modifier_color_encoding_is_sRGB(PNG_CONST png_modifier *pm) |
| { |
| return pm->current_encoding != 0 && pm->current_encoding == pm->encodings && |
| pm->current_encoding->gamma == pm->current_gamma; |
| } |
| |
| static int |
| modifier_color_encoding_is_set(PNG_CONST png_modifier *pm) |
| { |
| return pm->current_gamma != 0; |
| } |
| |
| /* Convenience macros. */ |
| #define CHUNK(a,b,c,d) (((a)<<24)+((b)<<16)+((c)<<8)+(d)) |
| #define CHUNK_IHDR CHUNK(73,72,68,82) |
| #define CHUNK_PLTE CHUNK(80,76,84,69) |
| #define CHUNK_IDAT CHUNK(73,68,65,84) |
| #define CHUNK_IEND CHUNK(73,69,78,68) |
| #define CHUNK_cHRM CHUNK(99,72,82,77) |
| #define CHUNK_gAMA CHUNK(103,65,77,65) |
| #define CHUNK_sBIT CHUNK(115,66,73,84) |
| #define CHUNK_sRGB CHUNK(115,82,71,66) |
| |
| /* The guts of modification are performed during a read. */ |
| static void |
| modifier_crc(png_bytep buffer) |
| { |
| /* Recalculate the chunk CRC - a complete chunk must be in |
| * the buffer, at the start. |
| */ |
| uInt datalen = png_get_uint_32(buffer); |
| uLong crc = crc32(0, buffer+4, datalen+4); |
| /* The cast to png_uint_32 is safe because a crc32 is always a 32 bit value. |
| */ |
| png_save_uint_32(buffer+datalen+8, (png_uint_32)crc); |
| } |
| |
| static void |
| modifier_setbuffer(png_modifier *pm) |
| { |
| modifier_crc(pm->buffer); |
| pm->buffer_count = png_get_uint_32(pm->buffer)+12; |
| pm->buffer_position = 0; |
| } |
| |
| /* Separate the callback into the actual implementation (which is passed the |
| * png_modifier explicitly) and the callback, which gets the modifier from the |
| * png_struct. |
| */ |
| static void |
| modifier_read_imp(png_modifier *pm, png_bytep pb, png_size_t st) |
| { |
| while (st > 0) |
| { |
| size_t cb; |
| png_uint_32 len, chunk; |
| png_modification *mod; |
| |
| if (pm->buffer_position >= pm->buffer_count) switch (pm->state) |
| { |
| static png_byte sign[8] = { 137, 80, 78, 71, 13, 10, 26, 10 }; |
| case modifier_start: |
| store_read_imp(&pm->this, pm->buffer, 8); /* size of signature. */ |
| pm->buffer_count = 8; |
| pm->buffer_position = 0; |
| |
| if (memcmp(pm->buffer, sign, 8) != 0) |
| png_error(pm->this.pread, "invalid PNG file signature"); |
| pm->state = modifier_signature; |
| break; |
| |
| case modifier_signature: |
| store_read_imp(&pm->this, pm->buffer, 13+12); /* size of IHDR */ |
| pm->buffer_count = 13+12; |
| pm->buffer_position = 0; |
| |
| if (png_get_uint_32(pm->buffer) != 13 || |
| png_get_uint_32(pm->buffer+4) != CHUNK_IHDR) |
| png_error(pm->this.pread, "invalid IHDR"); |
| |
| /* Check the list of modifiers for modifications to the IHDR. */ |
| mod = pm->modifications; |
| while (mod != NULL) |
| { |
| if (mod->chunk == CHUNK_IHDR && mod->modify_fn && |
| (*mod->modify_fn)(pm, mod, 0)) |
| { |
| mod->modified = 1; |
| modifier_setbuffer(pm); |
| } |
| |
| /* Ignore removal or add if IHDR! */ |
| mod = mod->next; |
| } |
| |
| /* Cache information from the IHDR (the modified one.) */ |
| pm->bit_depth = pm->buffer[8+8]; |
| pm->colour_type = pm->buffer[8+8+1]; |
| |
| pm->state = modifier_IHDR; |
| pm->flush = 0; |
| break; |
| |
| case modifier_IHDR: |
| default: |
| /* Read a new chunk and process it until we see PLTE, IDAT or |
| * IEND. 'flush' indicates that there is still some data to |
| * output from the preceding chunk. |
| */ |
| if ((cb = pm->flush) > 0) |
| { |
| if (cb > st) cb = st; |
| pm->flush -= cb; |
| store_read_imp(&pm->this, pb, cb); |
| pb += cb; |
| st -= cb; |
| if (st == 0) return; |
| } |
| |
| /* No more bytes to flush, read a header, or handle a pending |
| * chunk. |
| */ |
| if (pm->pending_chunk != 0) |
| { |
| png_save_uint_32(pm->buffer, pm->pending_len); |
| png_save_uint_32(pm->buffer+4, pm->pending_chunk); |
| pm->pending_len = 0; |
| pm->pending_chunk = 0; |
| } |
| else |
| store_read_imp(&pm->this, pm->buffer, 8); |
| |
| pm->buffer_count = 8; |
| pm->buffer_position = 0; |
| |
| /* Check for something to modify or a terminator chunk. */ |
| len = png_get_uint_32(pm->buffer); |
| chunk = png_get_uint_32(pm->buffer+4); |
| |
| /* Terminators first, they may have to be delayed for added |
| * chunks |
| */ |
| if (chunk == CHUNK_PLTE || chunk == CHUNK_IDAT || |
| chunk == CHUNK_IEND) |
| { |
| mod = pm->modifications; |
| |
| while (mod != NULL) |
| { |
| if ((mod->add == chunk || |
| (mod->add == CHUNK_PLTE && chunk == CHUNK_IDAT)) && |
| mod->modify_fn != NULL && !mod->modified && !mod->added) |
| { |
| /* Regardless of what the modify function does do not run |
| * this again. |
| */ |
| mod->added = 1; |
| |
| if ((*mod->modify_fn)(pm, mod, 1 /*add*/)) |
| { |
| /* Reset the CRC on a new chunk */ |
| if (pm->buffer_count > 0) |
| modifier_setbuffer(pm); |
| |
| else |
| { |
| pm->buffer_position = 0; |
| mod->removed = 1; |
| } |
| |
| /* The buffer has been filled with something (we assume) |
| * so output this. Pend the current chunk. |
| */ |
| pm->pending_len = len; |
| pm->pending_chunk = chunk; |
| break; /* out of while */ |
| } |
| } |
| |
| mod = mod->next; |
| } |
| |
| /* Don't do any further processing if the buffer was modified - |
| * otherwise the code will end up modifying a chunk that was |
| * just added. |
| */ |
| if (mod != NULL) |
| break; /* out of switch */ |
| } |
| |
| /* If we get to here then this chunk may need to be modified. To |
| * do this it must be less than 1024 bytes in total size, otherwise |
| * it just gets flushed. |
| */ |
| if (len+12 <= sizeof pm->buffer) |
| { |
| store_read_imp(&pm->this, pm->buffer+pm->buffer_count, |
| len+12-pm->buffer_count); |
| pm->buffer_count = len+12; |
| |
| /* Check for a modification, else leave it be. */ |
| mod = pm->modifications; |
| while (mod != NULL) |
| { |
| if (mod->chunk == chunk) |
| { |
| if (mod->modify_fn == NULL) |
| { |
| /* Remove this chunk */ |
| pm->buffer_count = pm->buffer_position = 0; |
| mod->removed = 1; |
| break; /* Terminate the while loop */ |
| } |
| |
| else if ((*mod->modify_fn)(pm, mod, 0)) |
| { |
| mod->modified = 1; |
| /* The chunk may have been removed: */ |
| if (pm->buffer_count == 0) |
| { |
| pm->buffer_position = 0; |
| break; |
| } |
| modifier_setbuffer(pm); |
| } |
| } |
| |
| mod = mod->next; |
| } |
| } |
| |
| else |
| pm->flush = len+12 - pm->buffer_count; /* data + crc */ |
| |
| /* Take the data from the buffer (if there is any). */ |
| break; |
| } |
| |
| /* Here to read from the modifier buffer (not directly from |
| * the store, as in the flush case above.) |
| */ |
| cb = pm->buffer_count - pm->buffer_position; |
| |
| if (cb > st) |
| cb = st; |
| |
| memcpy(pb, pm->buffer + pm->buffer_position, cb); |
| st -= cb; |
| pb += cb; |
| pm->buffer_position += cb; |
| } |
| } |
| |
| /* The callback: */ |
| static void |
| modifier_read(png_structp ppIn, png_bytep pb, png_size_t st) |
| { |
| png_const_structp pp = ppIn; |
| png_modifier *pm = voidcast(png_modifier*, png_get_io_ptr(pp)); |
| |
| if (pm == NULL || pm->this.pread != pp) |
| png_error(pp, "bad modifier_read call"); |
| |
| modifier_read_imp(pm, pb, st); |
| } |
| |
| /* Like store_progressive_read but the data is getting changed as we go so we |
| * need a local buffer. |
| */ |
| static void |
| modifier_progressive_read(png_modifier *pm, png_structp pp, png_infop pi) |
| { |
| if (pm->this.pread != pp || pm->this.current == NULL || |
| pm->this.next == NULL) |
| png_error(pp, "store state damaged (progressive)"); |
| |
| /* This is another Horowitz and Hill random noise generator. In this case |
| * the aim is to stress the progressive reader with truly horrible variable |
| * buffer sizes in the range 1..500, so a sequence of 9 bit random numbers |
| * is generated. We could probably just count from 1 to 32767 and get as |
| * good a result. |
| */ |
| for (;;) |
| { |
| static png_uint_32 noise = 1; |
| png_size_t cb, cbAvail; |
| png_byte buffer[512]; |
| |
| /* Generate 15 more bits of stuff: */ |
| noise = (noise << 9) | ((noise ^ (noise >> (9-5))) & 0x1ff); |
| cb = noise & 0x1ff; |
| |
| /* Check that this number of bytes are available (in the current buffer.) |
| * (This doesn't quite work - the modifier might delete a chunk; unlikely |
| * but possible, it doesn't happen at present because the modifier only |
| * adds chunks to standard images.) |
| */ |
| cbAvail = store_read_buffer_avail(&pm->this); |
| if (pm->buffer_count > pm->buffer_position) |
| cbAvail += pm->buffer_count - pm->buffer_position; |
| |
| if (cb > cbAvail) |
| { |
| /* Check for EOF: */ |
| if (cbAvail == 0) |
| break; |
| |
| cb = cbAvail; |
| } |
| |
| modifier_read_imp(pm, buffer, cb); |
| png_process_data(pp, pi, buffer, cb); |
| } |
| |
| /* Check the invariants at the end (if this fails it's a problem in this |
| * file!) |
| */ |
| if (pm->buffer_count > pm->buffer_position || |
| pm->this.next != &pm->this.current->data || |
| pm->this.readpos < pm->this.current->datacount) |
| png_error(pp, "progressive read implementation error"); |
| } |
| |
| /* Set up a modifier. */ |
| static png_structp |
| set_modifier_for_read(png_modifier *pm, png_infopp ppi, png_uint_32 id, |
| PNG_CONST char *name) |
| { |
| /* Do this first so that the modifier fields are cleared even if an error |
| * happens allocating the png_struct. No allocation is done here so no |
| * cleanup is required. |
| */ |
| pm->state = modifier_start; |
| pm->bit_depth = 0; |
| pm->colour_type = 255; |
| |
| pm->pending_len = 0; |
| pm->pending_chunk = 0; |
| pm->flush = 0; |
| pm->buffer_count = 0; |
| pm->buffer_position = 0; |
| |
| return set_store_for_read(&pm->this, ppi, id, name); |
| } |
| |
| |
| /******************************** MODIFICATIONS *******************************/ |
| /* Standard modifications to add chunks. These do not require the _SUPPORTED |
| * macros because the chunks can be there regardless of whether this specific |
| * libpng supports them. |
| */ |
| typedef struct gama_modification |
| { |
| png_modification this; |
| png_fixed_point gamma; |
| } gama_modification; |
| |
| static int |
| gama_modify(png_modifier *pm, png_modification *me, int add) |
| { |
| UNUSED(add) |
| /* This simply dumps the given gamma value into the buffer. */ |
| png_save_uint_32(pm->buffer, 4); |
| png_save_uint_32(pm->buffer+4, CHUNK_gAMA); |
| png_save_uint_32(pm->buffer+8, ((gama_modification*)me)->gamma); |
| return 1; |
| } |
| |
| static void |
| gama_modification_init(gama_modification *me, png_modifier *pm, double gammad) |
| { |
| double g; |
| |
| modification_init(&me->this); |
| me->this.chunk = CHUNK_gAMA; |
| me->this.modify_fn = gama_modify; |
| me->this.add = CHUNK_PLTE; |
| g = fix(gammad); |
| me->gamma = (png_fixed_point)g; |
| me->this.next = pm->modifications; |
| pm->modifications = &me->this; |
| } |
| |
| typedef struct chrm_modification |
| { |
| png_modification this; |
| PNG_CONST color_encoding *encoding; |
| png_fixed_point wx, wy, rx, ry, gx, gy, bx, by; |
| } chrm_modification; |
| |
| static int |
| chrm_modify(png_modifier *pm, png_modification *me, int add) |
| { |
| UNUSED(add) |
| /* As with gAMA this just adds the required cHRM chunk to the buffer. */ |
| png_save_uint_32(pm->buffer , 32); |
| png_save_uint_32(pm->buffer+ 4, CHUNK_cHRM); |
| png_save_uint_32(pm->buffer+ 8, ((chrm_modification*)me)->wx); |
| png_save_uint_32(pm->buffer+12, ((chrm_modification*)me)->wy); |
| png_save_uint_32(pm->buffer+16, ((chrm_modification*)me)->rx); |
| png_save_uint_32(pm->buffer+20, ((chrm_modification*)me)->ry); |
| png_save_uint_32(pm->buffer+24, ((chrm_modification*)me)->gx); |
| png_save_uint_32(pm->buffer+28, ((chrm_modification*)me)->gy); |
| png_save_uint_32(pm->buffer+32, ((chrm_modification*)me)->bx); |
| png_save_uint_32(pm->buffer+36, ((chrm_modification*)me)->by); |
| return 1; |
| } |
| |
| static void |
| chrm_modification_init(chrm_modification *me, png_modifier *pm, |
| PNG_CONST color_encoding *encoding) |
| { |
| CIE_color white = white_point(encoding); |
| |
| /* Original end points: */ |
| me->encoding = encoding; |
| |
| /* Chromaticities (in fixed point): */ |
| me->wx = fix(chromaticity_x(white)); |
| me->wy = fix(chromaticity_y(white)); |
| |
| me->rx = fix(chromaticity_x(encoding->red)); |
| me->ry = fix(chromaticity_y(encoding->red)); |
| me->gx = fix(chromaticity_x(encoding->green)); |
| me->gy = fix(chromaticity_y(encoding->green)); |
| me->bx = fix(chromaticity_x(encoding->blue)); |
| me->by = fix(chromaticity_y(encoding->blue)); |
| |
| modification_init(&me->this); |
| me->this.chunk = CHUNK_cHRM; |
| me->this.modify_fn = chrm_modify; |
| me->this.add = CHUNK_PLTE; |
| me->this.next = pm->modifications; |
| pm->modifications = &me->this; |
| } |
| |
| typedef struct srgb_modification |
| { |
| png_modification this; |
| png_byte intent; |
| } srgb_modification; |
| |
| static int |
| srgb_modify(png_modifier *pm, png_modification *me, int add) |
| { |
| UNUSED(add) |
| /* As above, ignore add and just make a new chunk */ |
| png_save_uint_32(pm->buffer, 1); |
| png_save_uint_32(pm->buffer+4, CHUNK_sRGB); |
| pm->buffer[8] = ((srgb_modification*)me)->intent; |
| return 1; |
| } |
| |
| static void |
| srgb_modification_init(srgb_modification *me, png_modifier *pm, png_byte intent) |
| { |
| modification_init(&me->this); |
| me->this.chunk = CHUNK_sBIT; |
| |
| if (intent <= 3) /* if valid, else *delete* sRGB chunks */ |
| { |
| me->this.modify_fn = srgb_modify; |
| me->this.add = CHUNK_PLTE; |
| me->intent = intent; |
| } |
| |
| else |
| { |
| me->this.modify_fn = 0; |
| me->this.add = 0; |
| me->intent = 0; |
| } |
| |
| me->this.next = pm->modifications; |
| pm->modifications = &me->this; |
| } |
| |
| typedef struct sbit_modification |
| { |
| png_modification this; |
| png_byte sbit; |
| } sbit_modification; |
| |
| static int |
| sbit_modify(png_modifier *pm, png_modification *me, int add) |
| { |
| png_byte sbit = ((sbit_modification*)me)->sbit; |
| if (pm->bit_depth > sbit) |
| { |
| int cb = 0; |
| switch (pm->colour_type) |
| { |
| case 0: |
| cb = 1; |
| break; |
| |
| case 2: |
| case 3: |
| cb = 3; |
| break; |
| |
| case 4: |
| cb = 2; |
| break; |
| |
| case 6: |
| cb = 4; |
| break; |
| |
| default: |
| png_error(pm->this.pread, |
| "unexpected colour type in sBIT modification"); |
| } |
| |
| png_save_uint_32(pm->buffer, cb); |
| png_save_uint_32(pm->buffer+4, CHUNK_sBIT); |
| |
| while (cb > 0) |
| (pm->buffer+8)[--cb] = sbit; |
| |
| return 1; |
| } |
| else if (!add) |
| { |
| /* Remove the sBIT chunk */ |
| pm->buffer_count = pm->buffer_position = 0; |
| return 1; |
| } |
| else |
| return 0; /* do nothing */ |
| } |
| |
| static void |
| sbit_modification_init(sbit_modification *me, png_modifier *pm, png_byte sbit) |
| { |
| modification_init(&me->this); |
| me->this.chunk = CHUNK_sBIT; |
| me->this.modify_fn = sbit_modify; |
| me->this.add = CHUNK_PLTE; |
| me->sbit = sbit; |
| me->this.next = pm->modifications; |
| pm->modifications = &me->this; |
| } |
| #endif /* PNG_READ_TRANSFORMS_SUPPORTED */ |
| |
| /***************************** STANDARD PNG FILES *****************************/ |
| /* Standard files - write and save standard files. */ |
| /* There are two basic forms of standard images. Those which attempt to have |
| * all the possible pixel values (not possible for 16bpp images, but a range of |
| * values are produced) and those which have a range of image sizes. The former |
| * are used for testing transforms, in particular gamma correction and bit |
| * reduction and increase. The latter are reserved for testing the behavior of |
| * libpng with respect to 'odd' image sizes - particularly small images where |
| * rows become 1 byte and interlace passes disappear. |
| * |
| * The first, most useful, set are the 'transform' images, the second set of |
| * small images are the 'size' images. |
| * |
| * The transform files are constructed with rows which fit into a 1024 byte row |
| * buffer. This makes allocation easier below. Further regardless of the file |
| * format every row has 128 pixels (giving 1024 bytes for 64bpp formats). |
| * |
| * Files are stored with no gAMA or sBIT chunks, with a PLTE only when needed |
| * and with an ID derived from the colour type, bit depth and interlace type |
| * as above (FILEID). The width (128) and height (variable) are not stored in |
| * the FILEID - instead the fields are set to 0, indicating a transform file. |
| * |
| * The size files ar constructed with rows a maximum of 128 bytes wide, allowing |
| * a maximum width of 16 pixels (for the 64bpp case.) They also have a maximum |
| * height of 16 rows. The width and height are stored in the FILEID and, being |
| * non-zero, indicate a size file. |
| * |
| * For palette image (colour type 3) multiple transform images are stored with |
| * the same bit depth to allow testing of more colour combinations - |
| * particularly important for testing the gamma code because libpng uses a |
| * different code path for palette images. For size images a single palette is |
| * used. |
| */ |
| |
| /* Make a 'standard' palette. Because there are only 256 entries in a palette |
| * (maximum) this actually makes a random palette in the hope that enough tests |
| * will catch enough errors. (Note that the same palette isn't produced every |
| * time for the same test - it depends on what previous tests have been run - |
| * but a given set of arguments to pngvalid will always produce the same palette |
| * at the same test! This is why pseudo-random number generators are useful for |
| * testing.) |
| * |
| * The store must be open for write when this is called, otherwise an internal |
| * error will occur. This routine contains its own magic number seed, so the |
| * palettes generated don't change if there are intervening errors (changing the |
| * calls to the store_mark seed.) |
| */ |
| static store_palette_entry * |
| make_standard_palette(png_store* ps, int npalette, int do_tRNS) |
| { |
| static png_uint_32 palette_seed[2] = { 0x87654321, 9 }; |
| |
| int i = 0; |
| png_byte values[256][4]; |
| |
| /* Always put in black and white plus the six primary and secondary colors. |
| */ |
| for (; i<8; ++i) |
| { |
| values[i][1] = (i&1) ? 255 : 0; |
| values[i][2] = (i&2) ? 255 : 0; |
| values[i][3] = (i&4) ? 255 : 0; |
| } |
| |
| /* Then add 62 grays (one quarter of the remaining 256 slots). */ |
| { |
| int j = 0; |
| png_byte random_bytes[4]; |
| png_byte need[256]; |
| |
| need[0] = 0; /*got black*/ |
| memset(need+1, 1, (sizeof need)-2); /*need these*/ |
| need[255] = 0; /*but not white*/ |
| |
| while (i<70) |
| { |
| png_byte b; |
| |
| if (j==0) |
| { |
| make_four_random_bytes(palette_seed, random_bytes); |
| j = 4; |
| } |
| |
| b = random_bytes[--j]; |
| if (need[b]) |
| { |
| values[i][1] = b; |
| values[i][2] = b; |
| values[i++][3] = b; |
| } |
| } |
| } |
| |
| /* Finally add 192 colors at random - don't worry about matches to things we |
| * already have, chance is less than 1/65536. Don't worry about grays, |
| * chance is the same, so we get a duplicate or extra gray less than 1 time |
| * in 170. |
| */ |
| for (; i<256; ++i) |
| make_four_random_bytes(palette_seed, values[i]); |
| |
| /* Fill in the alpha values in the first byte. Just use all possible values |
| * (0..255) in an apparently random order: |
| */ |
| { |
| store_palette_entry *palette; |
| png_byte selector[4]; |
| |
| make_four_random_bytes(palette_seed, selector); |
| |
| if (do_tRNS) |
| for (i=0; i<256; ++i) |
| values[i][0] = (png_byte)(i ^ selector[0]); |
| |
| else |
| for (i=0; i<256; ++i) |
| values[i][0] = 255; /* no transparency/tRNS chunk */ |
| |
| /* 'values' contains 256 ARGB values, but we only need 'npalette'. |
| * 'npalette' will always be a power of 2: 2, 4, 16 or 256. In the low |
| * bit depth cases select colors at random, else it is difficult to have |
| * a set of low bit depth palette test with any chance of a reasonable |
| * range of colors. Do this by randomly permuting values into the low |
| * 'npalette' entries using an XOR mask generated here. This also |
| * permutes the npalette == 256 case in a potentially useful way (there is |
| * no relationship between palette index and the color value therein!) |
| */ |
| palette = store_write_palette(ps, npalette); |
| |
| for (i=0; i<npalette; ++i) |
| { |
| palette[i].alpha = values[i ^ selector[1]][0]; |
| palette[i].red = values[i ^ selector[1]][1]; |
| palette[i].green = values[i ^ selector[1]][2]; |
| palette[i].blue = values[i ^ selector[1]][3]; |
| } |
| |
| return palette; |
| } |
| } |
| |
| /* Initialize a standard palette on a write stream. The 'do_tRNS' argument |
| * indicates whether or not to also set the tRNS chunk. |
| */ |
| /* TODO: the png_structp here can probably be 'const' in the future */ |
| static void |
| init_standard_palette(png_store *ps, png_structp pp, png_infop pi, int npalette, |
| int do_tRNS) |
| { |
| store_palette_entry *ppal = make_standard_palette(ps, npalette, do_tRNS); |
| |
| { |
| int i; |
| png_color palette[256]; |
| |
| /* Set all entries to detect overread errors. */ |
| for (i=0; i<npalette; ++i) |
| { |
| palette[i].red = ppal[i].red; |
| palette[i].green = ppal[i].green; |
| palette[i].blue = ppal[i].blue; |
| } |
| |
| /* Just in case fill in the rest with detectable values: */ |
| for (; i<256; ++i) |
| palette[i].red = palette[i].green = palette[i].blue = 42; |
| |
| png_set_PLTE(pp, pi, palette, npalette); |
| } |
| |
| if (do_tRNS) |
| { |
| int i, j; |
| png_byte tRNS[256]; |
| |
| /* Set all the entries, but skip trailing opaque entries */ |
| for (i=j=0; i<npalette; ++i) |
| if ((tRNS[i] = ppal[i].alpha) < 255) |
| j = i+1; |
| |
| /* Fill in the remainder with a detectable value: */ |
| for (; i<256; ++i) |
| tRNS[i] = 24; |
| |
| if (j > 0) |
| png_set_tRNS(pp, pi, tRNS, j, 0/*color*/); |
| } |
| } |
| |
| /* The number of passes is related to the interlace type. There was no libpng |
| * API to determine this prior to 1.5, so we need an inquiry function: |
| */ |
| static int |
| npasses_from_interlace_type(png_const_structp pp, int interlace_type) |
| { |
| switch (interlace_type) |
| { |
| default: |
| png_error(pp, "invalid interlace type"); |
| |
| case PNG_INTERLACE_NONE: |
| return 1; |
| |
| case PNG_INTERLACE_ADAM7: |
| return PNG_INTERLACE_ADAM7_PASSES; |
| } |
| } |
| |
| static unsigned int |
| bit_size(png_const_structp pp, png_byte colour_type, png_byte bit_depth) |
| { |
| switch (colour_type) |
| { |
| default: png_error(pp, "invalid color type"); |
| |
| case 0: return bit_depth; |
| |
| case 2: return 3*bit_depth; |
| |
| case 3: return bit_depth; |
| |
| case 4: return 2*bit_depth; |
| |
| case 6: return 4*bit_depth; |
| } |
| } |
| |
| #define TRANSFORM_WIDTH 128U |
| #define TRANSFORM_ROWMAX (TRANSFORM_WIDTH*8U) |
| #define SIZE_ROWMAX (16*8U) /* 16 pixels, max 8 bytes each - 128 bytes */ |
| #define STANDARD_ROWMAX TRANSFORM_ROWMAX /* The larger of the two */ |
| #define SIZE_HEIGHTMAX 16 /* Maximum range of size images */ |
| |
| static size_t |
| transform_rowsize(png_const_structp pp, png_byte colour_type, |
| png_byte bit_depth) |
| { |
| return (TRANSFORM_WIDTH * bit_size(pp, colour_type, bit_depth)) / 8; |
| } |
| |
| /* transform_width(pp, colour_type, bit_depth) current returns the same number |
| * every time, so just use a macro: |
| */ |
| #define transform_width(pp, colour_type, bit_depth) TRANSFORM_WIDTH |
| |
| static png_uint_32 |
| transform_height(png_const_structp pp, png_byte colour_type, png_byte bit_depth) |
| { |
| switch (bit_size(pp, colour_type, bit_depth)) |
| { |
| case 1: |
| case 2: |
| case 4: |
| return 1; /* Total of 128 pixels */ |
| |
| case 8: |
| return 2; /* Total of 256 pixels/bytes */ |
| |
| case 16: |
| return 512; /* Total of 65536 pixels */ |
| |
| case 24: |
| case 32: |
| return 512; /* 65536 pixels */ |
| |
| case 48: |
| case 64: |
| return 2048;/* 4 x 65536 pixels. */ |
| # define TRANSFORM_HEIGHTMAX 2048 |
| |
| default: |
| return 0; /* Error, will be caught later */ |
| } |
| } |
| |
| /* The following can only be defined here, now we have the definitions |
| * of the transform image sizes. |
| */ |
| static png_uint_32 |
| standard_width(png_const_structp pp, png_uint_32 id) |
| { |
| png_uint_32 width = WIDTH_FROM_ID(id); |
| UNUSED(pp) |
| |
| if (width == 0) |
| width = transform_width(pp, COL_FROM_ID(id), DEPTH_FROM_ID(id)); |
| |
| return width; |
| } |
| |
| static png_uint_32 |
| standard_height(png_const_structp pp, png_uint_32 id) |
| { |
| png_uint_32 height = HEIGHT_FROM_ID(id); |
| |
| if (height == 0) |
| height = transform_height(pp, COL_FROM_ID(id), DEPTH_FROM_ID(id)); |
| |
| return height; |
| } |
| |
| static png_uint_32 |
| standard_rowsize(png_const_structp pp, png_uint_32 id) |
| { |
| png_uint_32 width = standard_width(pp, id); |
| |
| /* This won't overflow: */ |
| width *= bit_size(pp, COL_FROM_ID(id), DEPTH_FROM_ID(id)); |
| return (width + 7) / 8; |
| } |
| |
| static void |
| transform_row(png_const_structp pp, png_byte buffer[TRANSFORM_ROWMAX], |
| png_byte colour_type, png_byte bit_depth, png_uint_32 y) |
| { |
| png_uint_32 v = y << 7; |
| png_uint_32 i = 0; |
| |
| switch (bit_size(pp, colour_type, bit_depth)) |
| { |
| case 1: |
| while (i<128/8) buffer[i] = v & 0xff, v += 17, ++i; |
| return; |
| |
| case 2: |
| while (i<128/4) buffer[i] = v & 0xff, v += 33, ++i; |
| return; |
| |
| case 4: |
| while (i<128/2) buffer[i] = v & 0xff, v += 65, ++i; |
| return; |
| |
| case 8: |
| /* 256 bytes total, 128 bytes in each row set as follows: */ |
| while (i<128) buffer[i] = v & 0xff, ++v, ++i; |
| return; |
| |
| case 16: |
| /* Generate all 65536 pixel values in order, which includes the 8 bit |
| * GA case as well as the 16 bit G case. |
| */ |
| while (i<128) |
| buffer[2*i] = (v>>8) & 0xff, buffer[2*i+1] = v & 0xff, ++v, ++i; |
| |
| return; |
| |
| case 24: |
| /* 65535 pixels, but rotate the values. */ |
| while (i<128) |
| { |
| /* Three bytes per pixel, r, g, b, make b by r^g */ |
| buffer[3*i+0] = (v >> 8) & 0xff; |
| buffer[3*i+1] = v & 0xff; |
| buffer[3*i+2] = ((v >> 8) ^ v) & 0xff; |
| ++v; |
| ++i; |
| } |
| |
| return; |
| |
| case 32: |
| /* 65535 pixels, r, g, b, a; just replicate */ |
| while (i<128) |
| { |
| buffer[4*i+0] = (v >> 8) & 0xff; |
| buffer[4*i+1] = v & 0xff; |
| buffer[4*i+2] = (v >> 8) & 0xff; |
| buffer[4*i+3] = v & 0xff; |
| ++v; |
| ++i; |
| } |
| |
| return; |
| |
| case 48: |
| /* y is maximum 2047, giving 4x65536 pixels, make 'r' increase by 1 at |
| * each pixel, g increase by 257 (0x101) and 'b' by 0x1111: |
| */ |
| while (i<128) |
| { |
| png_uint_32 t = v++; |
| buffer[6*i+0] = (t >> 8) & 0xff; |
| buffer[6*i+1] = t & 0xff; |
| t *= 257; |
| buffer[6*i+2] = (t >> 8) & 0xff; |
| buffer[6*i+3] = t & 0xff; |
| t *= 17; |
| buffer[6*i+4] = (t >> 8) & 0xff; |
| buffer[6*i+5] = t & 0xff; |
| ++i; |
| } |
| |
| return; |
| |
| case 64: |
| /* As above in the 32 bit case. */ |
| while (i<128) |
| { |
| png_uint_32 t = v++; |
| buffer[8*i+0] = (t >> 8) & 0xff; |
| buffer[8*i+1] = t & 0xff; |
| buffer[8*i+4] = (t >> 8) & 0xff; |
| buffer[8*i+5] = t & 0xff; |
| t *= 257; |
| buffer[8*i+2] = (t >> 8) & 0xff; |
| buffer[8*i+3] = t & 0xff; |
| buffer[8*i+6] = (t >> 8) & 0xff; |
| buffer[8*i+7] = t & 0xff; |
| ++i; |
| } |
| return; |
| |
| default: |
| break; |
| } |
| |
| png_error(pp, "internal error"); |
| } |
| |
| /* This is just to do the right cast - could be changed to a function to check |
| * 'bd' but there isn't much point. |
| */ |
| #define DEPTH(bd) ((png_byte)(1U << (bd))) |
| |
| /* Make a standardized image given a an image colour type, bit depth and |
| * interlace type. The standard images have a very restricted range of |
| * rows and heights and are used for testing transforms rather than image |
| * layout details. See make_size_images below for a way to make images |
| * that test odd sizes along with the libpng interlace handling. |
| */ |
| static void |
| make_transform_image(png_store* PNG_CONST ps, png_byte PNG_CONST colour_type, |
| png_byte PNG_CONST bit_depth, int palette_number, int interlace_type, |
| png_const_charp name) |
| { |
| context(ps, fault); |
| |
| Try |
| { |
| png_infop pi; |
| png_structp pp = set_store_for_write(ps, &pi, name); |
| png_uint_32 h; |
| |
| /* In the event of a problem return control to the Catch statement below |
| * to do the clean up - it is not possible to 'return' directly from a Try |
| * block. |
| */ |
| if (pp == NULL) |
| Throw ps; |
| |
| h = transform_height(pp, colour_type, bit_depth); |
| |
| png_set_IHDR(pp, pi, transform_width(pp, colour_type, bit_depth), h, |
| bit_depth, colour_type, interlace_type, |
| PNG_COMPRESSION_TYPE_BASE, PNG_FILTER_TYPE_BASE); |
| |
| #ifdef PNG_TEXT_SUPPORTED |
| { |
| static char key[] = "image name"; /* must be writeable */ |
| size_t pos; |
| png_text text; |
| char copy[FILE_NAME_SIZE]; |
| |
| /* Use a compressed text string to test the correct interaction of text |
| * compression and IDAT compression. |
| */ |
| text.compression = PNG_TEXT_COMPRESSION_zTXt; |
| text.key = key; |
| /* Yuck: the text must be writable! */ |
| pos = safecat(copy, sizeof copy, 0, ps->wname); |
| text.text = copy; |
| text.text_length = pos; |
| text.itxt_length = 0; |
| text.lang = 0; |
| text.lang_key = 0; |
| |
| png_set_text(pp, pi, &text, 1); |
| } |
| #endif |
| |
| if (colour_type == 3) /* palette */ |
| init_standard_palette(ps, pp, pi, 1U << bit_depth, 1/*do tRNS*/); |
| |
| png_write_info(pp, pi); |
| |
| if (png_get_rowbytes(pp, pi) != |
| transform_rowsize(pp, colour_type, bit_depth)) |
| png_error(pp, "row size incorrect"); |
| |
| else |
| { |
| /* Somewhat confusingly this must be called *after* png_write_info |
| * because if it is called before, the information in *pp has not been |
| * updated to reflect the interlaced image. |
| */ |
| int npasses = png_set_interlace_handling(pp); |
| int pass; |
| |
| if (npasses != npasses_from_interlace_type(pp, interlace_type)) |
| png_error(pp, "write: png_set_interlace_handling failed"); |
| |
| for (pass=0; pass<npasses; ++pass) |
| { |
| png_uint_32 y; |
| |
| for (y=0; y<h; ++y) |
| { |
| png_byte buffer[TRANSFORM_ROWMAX]; |
| |
| transform_row(pp, buffer, colour_type, bit_depth, y); |
| png_write_row(pp, buffer); |
| } |
| } |
| } |
| |
| #ifdef PNG_TEXT_SUPPORTED |
| { |
| static char key[] = "end marker"; |
| static char comment[] = "end"; |
| png_text text; |
| |
| /* Use a compressed text string to test the correct interaction of text |
| * compression and IDAT compression. |
| */ |
| text.compression = PNG_TEXT_COMPRESSION_zTXt; |
| text.key = key; |
| text.text = comment; |
| text.text_length = (sizeof comment)-1; |
| text.itxt_length = 0; |
| text.lang = 0; |
| text.lang_key = 0; |
| |
| png_set_text(pp, pi, &text, 1); |
| } |
| #endif |
| |
| png_write_end(pp, pi); |
| |
| /* And store this under the appropriate id, then clean up. */ |
| store_storefile(ps, FILEID(colour_type, bit_depth, palette_number, |
| interlace_type, 0, 0, 0)); |
| |
| store_write_reset(ps); |
| } |
| |
| Catch(fault) |
| { |
| /* Use the png_store returned by the exception. This may help the compiler |
| * because 'ps' is not used in this branch of the setjmp. Note that fault |
| * and ps will always be the same value. |
| */ |
| store_write_reset(fault); |
| } |
| } |
| |
| static void |
| make_transform_images(png_store *ps) |
| { |
| png_byte colour_type = 0; |
| png_byte bit_depth = 0; |
| int palette_number = 0; |
| |
| /* This is in case of errors. */ |
| safecat(ps->test, sizeof ps->test, 0, "make standard images"); |
| |
| /* Use next_format to enumerate all the combinations we test, including |
| * generating multiple low bit depth palette images. |
| */ |
| while (next_format(&colour_type, &bit_depth, &palette_number)) |
| { |
| int interlace_type; |
| |
| for (interlace_type = PNG_INTERLACE_NONE; |
| interlace_type < PNG_INTERLACE_LAST; ++interlace_type) |
| { |
| char name[FILE_NAME_SIZE]; |
| |
| standard_name(name, sizeof name, 0, colour_type, bit_depth, |
| palette_number, interlace_type, 0, 0, 0); |
| make_transform_image(ps, colour_type, bit_depth, palette_number, |
| interlace_type, name); |
| } |
| } |
| } |
| |
| /* The following two routines use the PNG interlace support macros from |
| * png.h to interlace or deinterlace rows. |
| */ |
| static void |
| interlace_row(png_bytep buffer, png_const_bytep imageRow, |
| unsigned int pixel_size, png_uint_32 w, int pass) |
| { |
| png_uint_32 xin, xout, xstep; |
| |
| /* Note that this can, trivially, be optimized to a memcpy on pass 7, the |
| * code is presented this way to make it easier to understand. In practice |
| * consult the code in the libpng source to see other ways of doing this. |
| */ |
| xin = PNG_PASS_START_COL(pass); |
| xstep = 1U<<PNG_PASS_COL_SHIFT(pass); |
| |
| for (xout=0; xin<w; xin+=xstep) |
| { |
| pixel_copy(buffer, xout, imageRow, xin, pixel_size); |
| ++xout; |
| } |
| } |
| |
| static void |
| deinterlace_row(png_bytep buffer, png_const_bytep row, |
| unsigned int pixel_size, png_uint_32 w, int pass) |
| { |
| /* The inverse of the above, 'row' is part of row 'y' of the output image, |
| * in 'buffer'. The image is 'w' wide and this is pass 'pass', distribute |
| * the pixels of row into buffer and return the number written (to allow |
| * this to be checked). |
| */ |
| png_uint_32 xin, xout, xstep; |
| |
| xout = PNG_PASS_START_COL(pass); |
| xstep = 1U<<PNG_PASS_COL_SHIFT(pass); |
| |
| for (xin=0; xout<w; xout+=xstep) |
| { |
| pixel_copy(buffer, xout, row, xin, pixel_size); |
| ++xin; |
| } |
| } |
| |
| /* Build a single row for the 'size' test images; this fills in only the |
| * first bit_width bits of the sample row. |
| */ |
| static void |
| size_row(png_byte buffer[SIZE_ROWMAX], png_uint_32 bit_width, png_uint_32 y) |
| { |
| /* height is in the range 1 to 16, so: */ |
| y = ((y & 1) << 7) + ((y & 2) << 6) + ((y & 4) << 5) + ((y & 8) << 4); |
| /* the following ensures bits are set in small images: */ |
| y ^= 0xA5; |
| |
| while (bit_width >= 8) |
| *buffer++ = (png_byte)y++, bit_width -= 8; |
| |
| /* There may be up to 7 remaining bits, these go in the most significant |
| * bits of the byte. |
| */ |
| if (bit_width > 0) |
| { |
| png_uint_32 mask = (1U<<(8-bit_width))-1; |
| *buffer = (png_byte)((*buffer & mask) | (y & ~mask)); |
| } |
| } |
| |
| static void |
| make_size_image(png_store* PNG_CONST ps, png_byte PNG_CONST colour_type, |
| png_byte PNG_CONST bit_depth, int PNG_CONST interlace_type, |
| png_uint_32 PNG_CONST w, png_uint_32 PNG_CONST h, |
| int PNG_CONST do_interlace) |
| { |
| context(ps, fault); |
| |
| Try |
| { |
| png_infop pi; |
| png_structp pp; |
| unsigned int pixel_size; |
| |
| /* Make a name and get an appropriate id for the store: */ |
| char name[FILE_NAME_SIZE]; |
| PNG_CONST png_uint_32 id = FILEID(colour_type, bit_depth, 0/*palette*/, |
| interlace_type, w, h, do_interlace); |
| |
| standard_name_from_id(name, sizeof name, 0, id); |
| pp = set_store_for_write(ps, &pi, name); |
| |
| /* In the event of a problem return control to the Catch statement below |
| * to do the clean up - it is not possible to 'return' directly from a Try |
| * block. |
| */ |
| if (pp == NULL) |
| Throw ps; |
| |
| png_set_IHDR(pp, pi, w, h, bit_depth, colour_type, interlace_type, |
| PNG_COMPRESSION_TYPE_BASE, PNG_FILTER_TYPE_BASE); |
| |
| if (colour_type == 3) /* palette */ |
| init_standard_palette(ps, pp, pi, 1U << bit_depth, 0/*do tRNS*/); |
| |
| png_write_info(pp, pi); |
| |
| /* Calculate the bit size, divide by 8 to get the byte size - this won't |
| * overflow because we know the w values are all small enough even for |
| * a system where 'unsigned int' is only 16 bits. |
| */ |
| pixel_size = bit_size(pp, colour_type, bit_depth); |
| if (png_get_rowbytes(pp, pi) != ((w * pixel_size) + 7) / 8) |
| png_error(pp, "row size incorrect"); |
| |
| else |
| { |
| int npasses = npasses_from_interlace_type(pp, interlace_type); |
| png_uint_32 y; |
| int pass; |
| png_byte image[16][SIZE_ROWMAX]; |
| |
| /* To help consistent error detection make the parts of this buffer |
| * that aren't set below all '1': |
| */ |
| memset(image, 0xff, sizeof image); |
| |
| if (!do_interlace && npasses != png_set_interlace_handling(pp)) |
| png_error(pp, "write: png_set_interlace_handling failed"); |
| |
| /* Prepare the whole image first to avoid making it 7 times: */ |
| for (y=0; y<h; ++y) |
| size_row(image[y], w * pixel_size, y); |
| |
| for (pass=0; pass<npasses; ++pass) |
| { |
| /* The following two are for checking the macros: */ |
| PNG_CONST png_uint_32 wPass = PNG_PASS_COLS(w, pass); |
| |
| /* If do_interlace is set we don't call png_write_row for every |
| * row because some of them are empty. In fact, for a 1x1 image, |
| * most of them are empty! |
| */ |
| for (y=0; y<h; ++y) |
| { |
| png_const_bytep row = image[y]; |
| png_byte tempRow[SIZE_ROWMAX]; |
| |
| /* If do_interlace *and* the image is interlaced we |
| * need a reduced interlace row; this may be reduced |
| * to empty. |
| */ |
| if (do_interlace && interlace_type == PNG_INTERLACE_ADAM7) |
| { |
| /* The row must not be written if it doesn't exist, notice |
| * that there are two conditions here, either the row isn't |
| * ever in the pass or the row would be but isn't wide |
| * enough to contribute any pixels. In fact the wPass test |
| * can be used to skip the whole y loop in this case. |
| */ |
| if (PNG_ROW_IN_INTERLACE_PASS(y, pass) && wPass > 0) |
| { |
| /* Set to all 1's for error detection (libpng tends to |
| * set unset things to 0). |
| */ |
| memset(tempRow, 0xff, sizeof tempRow); |
| interlace_row(tempRow, row, pixel_size, w, pass); |
| row = tempRow; |
| } |
| else |
| continue; |
| } |
| |
| /* Only get to here if the row has some pixels in it. */ |
| png_write_row(pp, row); |
| } |
| } |
| } |
| |
| png_write_end(pp, pi); |
| |
| /* And store this under the appropriate id, then clean up. */ |
| store_storefile(ps, id); |
| |
| store_write_reset(ps); |
| } |
| |
| Catch(fault) |
| { |
| /* Use the png_store returned by the exception. This may help the compiler |
| * because 'ps' is not used in this branch of the setjmp. Note that fault |
| * and ps will always be the same value. |
| */ |
| store_write_reset(fault); |
| } |
| } |
| |
| static void |
| make_size(png_store* PNG_CONST ps, png_byte PNG_CONST colour_type, int bdlo, |
| int PNG_CONST bdhi) |
| { |
| for (; bdlo <= bdhi; ++bdlo) |
| { |
| png_uint_32 width; |
| |
| for (width = 1; width <= 16; ++width) |
| { |
| png_uint_32 height; |
| |
| for (height = 1; height <= 16; ++height) |
| { |
| /* The four combinations of DIY interlace and interlace or not - |
| * no interlace + DIY should be identical to no interlace with |
| * libpng doing it. |
| */ |
| make_size_image(ps, colour_type, DEPTH(bdlo), PNG_INTERLACE_NONE, |
| width, height, 0); |
| make_size_image(ps, colour_type, DEPTH(bdlo), PNG_INTERLACE_NONE, |
| width, height, 1); |
| make_size_image(ps, colour_type, DEPTH(bdlo), PNG_INTERLACE_ADAM7, |
| width, height, 0); |
| make_size_image(ps, colour_type, DEPTH(bdlo), PNG_INTERLACE_ADAM7, |
| width, height, 1); |
| } |
| } |
| } |
| } |
| |
| static void |
| make_size_images(png_store *ps) |
| { |
| /* This is in case of errors. */ |
| safecat(ps->test, sizeof ps->test, 0, "make size images"); |
| |
| /* Arguments are colour_type, low bit depth, high bit depth |
| */ |
| make_size(ps, 0, 0, WRITE_BDHI); |
| make_size(ps, 2, 3, WRITE_BDHI); |
| make_size(ps, 3, 0, 3 /*palette: max 8 bits*/); |
| make_size(ps, 4, 3, WRITE_BDHI); |
| make_size(ps, 6, 3, WRITE_BDHI); |
| } |
| |
| /* Return a row based on image id and 'y' for checking: */ |
| static void |
| standard_row(png_const_structp pp, png_byte std[STANDARD_ROWMAX], |
| png_uint_32 id, png_uint_32 y) |
| { |
| if (WIDTH_FROM_ID(id) == 0) |
| transform_row(pp, std, COL_FROM_ID(id), DEPTH_FROM_ID(id), y); |
| else |
| size_row(std, WIDTH_FROM_ID(id) * bit_size(pp, COL_FROM_ID(id), |
| DEPTH_FROM_ID(id)), y); |
| } |
| |
| /* Tests - individual test cases */ |
| /* Like 'make_standard' but errors are deliberately introduced into the calls |
| * to ensure that they get detected - it should not be possible to write an |
| * invalid image with libpng! |
| */ |
| /* TODO: the 'set' functions can probably all be made to take a |
| * png_const_structp rather than a modifiable one. |
| */ |
| #ifdef PNG_WARNINGS_SUPPORTED |
| static void |
| sBIT0_error_fn(png_structp pp, png_infop pi) |
| { |
| /* 0 is invalid... */ |
| png_color_8 bad; |
| bad.red = bad.green = bad.blue = bad.gray = bad.alpha = 0; |
| png_set_sBIT(pp, pi, &bad); |
| } |
| |
| static void |
| sBIT_error_fn(png_structp pp, png_infop pi) |
| { |
| png_byte bit_depth; |
| png_color_8 bad; |
| |
| if (png_get_color_type(pp, pi) == PNG_COLOR_TYPE_PALETTE) |
| bit_depth = 8; |
| |
| else |
| bit_depth = png_get_bit_depth(pp, pi); |
| |
| /* Now we know the bit depth we can easily generate an invalid sBIT entry */ |
| bad.red = bad.green = bad.blue = bad.gray = bad.alpha = |
| (png_byte)(bit_depth+1); |
| png_set_sBIT(pp, pi, &bad); |
| } |
| |
| static PNG_CONST struct |
| { |
| void (*fn)(png_structp, png_infop); |
| PNG_CONST char *msg; |
| unsigned int warning :1; /* the error is a warning... */ |
| } error_test[] = |
| { |
| /* no warnings makes these errors undetectable. */ |
| { sBIT0_error_fn, "sBIT(0): failed to detect error", 1 }, |
| { sBIT_error_fn, "sBIT(too big): failed to detect error", 1 }, |
| }; |
| |
| static void |
| make_error(png_store* volatile psIn, png_byte PNG_CONST colour_type, |
| png_byte bit_depth, int interlace_type, int test, png_const_charp name) |
| { |
| png_store * volatile ps = psIn; |
| |
| context(ps, fault); |
| |
| Try |
| { |
| png_structp pp; |
| png_infop pi; |
| |
| pp = set_store_for_write(ps, &pi, name); |
| |
| if (pp == NULL) |
| Throw ps; |
| |
| png_set_IHDR(pp, pi, transform_width(pp, colour_type, bit_depth), |
| transform_height(pp, colour_type, bit_depth), bit_depth, colour_type, |
| interlace_type, PNG_COMPRESSION_TYPE_BASE, PNG_FILTER_TYPE_BASE); |
| |
| if (colour_type == 3) /* palette */ |
| init_standard_palette(ps, pp, pi, 1U << bit_depth, 0/*do tRNS*/); |
| |
| /* Time for a few errors; these are in various optional chunks, the |
| * standard tests test the standard chunks pretty well. |
| */ |
| # define exception__prev exception_prev_1 |
| # define exception__env exception_env_1 |
| Try |
| { |
| /* Expect this to throw: */ |
| ps->expect_error = !error_test[test].warning; |
| ps->expect_warning = error_test[test].warning; |
| ps->saw_warning = 0; |
| error_test[test].fn(pp, pi); |
| |
| /* Normally the error is only detected here: */ |
| png_write_info(pp, pi); |
| |
| /* And handle the case where it was only a warning: */ |
| if (ps->expect_warning && ps->saw_warning) |
| Throw ps; |
| |
| /* If we get here there is a problem, we have success - no error or |
| * no warning - when we shouldn't have success. Log an error. |
| */ |
| store_log(ps, pp, error_test[test].msg, 1 /*error*/); |
| } |
| |
| Catch (fault) |
| ps = fault; /* expected exit, make sure ps is not clobbered */ |
| #undef exception__prev |
| #undef exception__env |
| |
| /* And clear these flags */ |
| ps->expect_error = 0; |
| ps->expect_warning = 0; |
| |
| /* Now write the whole image, just to make sure that the detected, or |
| * undetected, errro has not created problems inside libpng. |
| */ |
| if (png_get_rowbytes(pp, pi) != |
| transform_rowsize(pp, colour_type, bit_depth)) |
| png_error(pp, "row size incorrect"); |
| |
| else |
| { |
| png_uint_32 h = transform_height(pp, colour_type, bit_depth); |
| int npasses = png_set_interlace_handling(pp); |
| int pass; |
| |
| if (npasses != npasses_from_interlace_type(pp, interlace_type)) |
| png_error(pp, "write: png_set_interlace_handling failed"); |
| |
| for (pass=0; pass<npasses; ++pass) |
| { |
| png_uint_32 y; |
| |
| for (y=0; y<h; ++y) |
| { |
| png_byte buffer[TRANSFORM_ROWMAX]; |
| |
| transform_row(pp, buffer, colour_type, bit_depth, y); |
| png_write_row(pp, buffer); |
| } |
| } |
| } |
| |
| png_write_end(pp, pi); |
| |
| /* The following deletes the file that was just written. */ |
| store_write_reset(ps); |
| } |
| |
| Catch(fault) |
| { |
| store_write_reset(fault); |
| } |
| } |
| |
| static int |
| make_errors(png_modifier* PNG_CONST pm, png_byte PNG_CONST colour_type, |
| int bdlo, int PNG_CONST bdhi) |
| { |
| for (; bdlo <= bdhi; ++bdlo) |
| { |
| int interlace_type; |
| |
| for (interlace_type = PNG_INTERLACE_NONE; |
| interlace_type < PNG_INTERLACE_LAST; ++interlace_type) |
| { |
| unsigned int test; |
| char name[FILE_NAME_SIZE]; |
| |
| standard_name(name, sizeof name, 0, colour_type, 1<<bdlo, 0, |
| interlace_type, 0, 0, 0); |
| |
| for (test=0; test<(sizeof error_test)/(sizeof error_test[0]); ++test) |
| { |
| make_error(&pm->this, colour_type, DEPTH(bdlo), interlace_type, |
| test, name); |
| |
| if (fail(pm)) |
| return 0; |
| } |
| } |
| } |
| |
| return 1; /* keep going */ |
| } |
| #endif |
| |
| static void |
| perform_error_test(png_modifier *pm) |
| { |
| #ifdef PNG_WARNINGS_SUPPORTED /* else there are no cases that work! */ |
| /* Need to do this here because we just write in this test. */ |
| safecat(pm->this.test, sizeof pm->this.test, 0, "error test"); |
| |
| if (!make_errors(pm, 0, 0, WRITE_BDHI)) |
| return; |
| |
| if (!make_errors(pm, 2, 3, WRITE_BDHI)) |
| return; |
| |
| if (!make_errors(pm, 3, 0, 3)) |
| return; |
| |
| if (!make_errors(pm, 4, 3, WRITE_BDHI)) |
| return; |
| |
| if (!make_errors(pm, 6, 3, WRITE_BDHI)) |
| return; |
| #else |
| UNUSED(pm) |
| #endif |
| } |
| |
| /* This is just to validate the internal PNG formatting code - if this fails |
| * then the warning messages the library outputs will probably be garbage. |
| */ |
| static void |
| perform_formatting_test(png_store *volatile ps) |
| { |
| #ifdef PNG_TIME_RFC1123_SUPPORTED |
| /* The handle into the formatting code is the RFC1123 support; this test does |
| * nothing if that is compiled out. |
| */ |
| context(ps, fault); |
| |
| Try |
| { |
| png_const_charp correct = "29 Aug 2079 13:53:60 +0000"; |
| png_const_charp result; |
| # if PNG_LIBPNG_VER >= 10600 |
| char timestring[29]; |
| # endif |
| png_structp pp; |
| png_time pt; |
| |
| pp = set_store_for_write(ps, NULL, "libpng formatting test"); |
| |
| if (pp == NULL) |
| Throw ps; |
| |
| |
| /* Arbitrary settings: */ |
| pt.year = 2079; |
| pt.month = 8; |
| pt.day = 29; |
| pt.hour = 13; |
| pt.minute = 53; |
| pt.second = 60; /* a leap second */ |
| |
| # if PNG_LIBPNG_VER < 10600 |
| result = png_convert_to_rfc1123(pp, &pt); |
| # else |
| if (png_convert_to_rfc1123_buffer(timestring, &pt)) |
| result = timestring; |
| |
| else |
| result = NULL; |
| # endif |
| |
| if (result == NULL) |
| png_error(pp, "png_convert_to_rfc1123 failed"); |
| |
| if (strcmp(result, correct) != 0) |
| { |
| size_t pos = 0; |
| char msg[128]; |
| |
| pos = safecat(msg, sizeof msg, pos, "png_convert_to_rfc1123("); |
| pos = safecat(msg, sizeof msg, pos, correct); |
| pos = safecat(msg, sizeof msg, pos, ") returned: '"); |
| pos = safecat(msg, sizeof msg, pos, result); |
| pos = safecat(msg, sizeof msg, pos, "'"); |
| |
| png_error(pp, msg); |
| } |
| |
| store_write_reset(ps); |
| } |
| |
| Catch(fault) |
| { |
| store_write_reset(fault); |
| } |
| #else |
| UNUSED(ps) |
| #endif |
| } |
| |
| /* Because we want to use the same code in both the progressive reader and the |
| * sequential reader it is necessary to deal with the fact that the progressive |
| * reader callbacks only have one parameter (png_get_progressive_ptr()), so this |
| * must contain all the test parameters and all the local variables directly |
| * accessible to the sequential reader implementation. |
| * |
| * The technique adopted is to reinvent part of what Dijkstra termed a |
| * 'display'; an array of pointers to the stack frames of enclosing functions so |
| * that a nested function definition can access the local (C auto) variables of |
| * the functions that contain its definition. In fact C provides the first |
| * pointer (the local variables - the stack frame pointer) and the last (the |
| * global variables - the BCPL global vector typically implemented as global |
| * addresses), this code requires one more pointer to make the display - the |
| * local variables (and function call parameters) of the function that actually |
| * invokes either the progressive or sequential reader. |
| * |
| * Perhaps confusingly this technique is confounded with classes - the |
| * 'standard_display' defined here is sub-classed as the 'gamma_display' below. |
| * A gamma_display is a standard_display, taking advantage of the ANSI-C |
| * requirement that the pointer to the first member of a structure must be the |
| * same as the pointer to the structure. This allows us to reuse standard_ |
| * functions in the gamma test code; something that could not be done with |
| * nested functions! |
| */ |
| typedef struct standard_display |
| { |
| png_store* ps; /* Test parameters (passed to the function) */ |
| png_byte colour_type; |
| png_byte bit_depth; |
| png_byte red_sBIT; /* Input data sBIT values. */ |
| png_byte green_sBIT; |
| png_byte blue_sBIT; |
| png_byte alpha_sBIT; |
| int interlace_type; |
| png_uint_32 id; /* Calculated file ID */ |
| png_uint_32 w; /* Width of image */ |
| png_uint_32 h; /* Height of image */ |
| int npasses; /* Number of interlaced passes */ |
| png_uint_32 pixel_size; /* Width of one pixel in bits */ |
| png_uint_32 bit_width; /* Width of output row in bits */ |
| size_t cbRow; /* Bytes in a row of the output image */ |
| int do_interlace; /* Do interlacing internally */ |
| int is_transparent; /* Transparency information was present. */ |
| int speed; /* Doing a speed test */ |
| int use_update_info;/* Call update_info, not start_image */ |
| struct |
| { |
| png_uint_16 red; |
| png_uint_16 green; |
| png_uint_16 blue; |
| } transparent; /* The transparent color, if set. */ |
| int npalette; /* Number of entries in the palette. */ |
| store_palette |
| palette; |
| } standard_display; |
| |
| static void |
| standard_display_init(standard_display *dp, png_store* ps, png_uint_32 id, |
| int do_interlace, int use_update_info) |
| { |
| memset(dp, 0, sizeof *dp); |
| |
| dp->ps = ps; |
| dp->colour_type = COL_FROM_ID(id); |
| dp->bit_depth = DEPTH_FROM_ID(id); |
| if (dp->bit_depth < 1 || dp->bit_depth > 16) |
| internal_error(ps, "internal: bad bit depth"); |
| if (dp->colour_type == 3) |
| dp->red_sBIT = dp->blue_sBIT = dp->green_sBIT = dp->alpha_sBIT = 8; |
| else |
| dp->red_sBIT = dp->blue_sBIT = dp->green_sBIT = dp->alpha_sBIT = |
| dp->bit_depth; |
| dp->interlace_type = INTERLACE_FROM_ID(id); |
| dp->id = id; |
| /* All the rest are filled in after the read_info: */ |
| dp->w = 0; |
| dp->h = 0; |
| dp->npasses = 0; |
| dp->pixel_size = 0; |
| dp->bit_width = 0; |
| dp->cbRow = 0; |
| dp->do_interlace = do_interlace; |
| dp->is_transparent = 0; |
| dp->speed = ps->speed; |
| dp->use_update_info = use_update_info; |
| dp->npalette = 0; |
| /* Preset the transparent color to black: */ |
| memset(&dp->transparent, 0, sizeof dp->transparent); |
| /* Preset the palette to full intensity/opaque througout: */ |
| memset(dp->palette, 0xff, sizeof dp->palette); |
| } |
| |
| /* Initialize the palette fields - this must be done later because the palette |
| * comes from the particular png_store_file that is selected. |
| */ |
| static void |
| standard_palette_init(standard_display *dp) |
| { |
| store_palette_entry *palette = store_current_palette(dp->ps, &dp->npalette); |
| |
| /* The remaining entries remain white/opaque. */ |
| if (dp->npalette > 0) |
| { |
| int i = dp->npalette; |
| memcpy(dp->palette, palette, i * sizeof *palette); |
| |
| /* Check for a non-opaque palette entry: */ |
| while (--i >= 0) |
| if (palette[i].alpha < 255) |
| break; |
| |
| # ifdef __GNUC__ |
| /* GCC can't handle the more obviously optimizable version. */ |
| if (i >= 0) |
| dp->is_transparent = 1; |
| else |
| dp->is_transparent = 0; |
| # else |
| dp->is_transparent = (i >= 0); |
| # endif |
| } |
| } |
| |
| /* Utility to read the palette from the PNG file and convert it into |
| * store_palette format. This returns 1 if there is any transparency in the |
| * palette (it does not check for a transparent colour in the non-palette case.) |
| */ |
| static int |
| read_palette(store_palette palette, int *npalette, png_const_structp pp, |
| png_infop pi) |
| { |
| png_colorp pal; |
| png_bytep trans_alpha; |
| int num; |
| |
| pal = 0; |
| *npalette = -1; |
| |
| if (png_get_PLTE(pp, pi, &pal, npalette) & PNG_INFO_PLTE) |
| { |
| int i = *npalette; |
| |
| if (i <= 0 || i > 256) |
| png_error(pp, "validate: invalid PLTE count"); |
| |
| while (--i >= 0) |
| { |
| palette[i].red = pal[i].red; |
| palette[i].green = pal[i].green; |
| palette[i].blue = pal[i].blue; |
| } |
| |
| /* Mark the remainder of the entries with a flag value (other than |
| * white/opaque which is the flag value stored above.) |
| */ |
| memset(palette + *npalette, 126, (256-*npalette) * sizeof *palette); |
| } |
| |
| else /* !png_get_PLTE */ |
| { |
| if (*npalette != (-1)) |
| png_error(pp, "validate: invalid PLTE result"); |
| /* But there is no palette, so record this: */ |
| *npalette = 0; |
| memset(palette, 113, sizeof (store_palette)); |
| } |
| |
| trans_alpha = 0; |
| num = 2; /* force error below */ |
| if ((png_get_tRNS(pp, pi, &trans_alpha, &num, 0) & PNG_INFO_tRNS) != 0 && |
| (trans_alpha != NULL || num != 1/*returns 1 for a transparent color*/) && |
| /* Oops, if a palette tRNS gets expanded png_read_update_info (at least so |
| * far as 1.5.4) does not remove the trans_alpha pointer, only num_trans, |
| * so in the above call we get a success, we get a pointer (who knows what |
| * to) and we get num_trans == 0: |
| */ |
| !(trans_alpha != NULL && num == 0)) /* TODO: fix this in libpng. */ |
| { |
| int i; |
| |
| /* Any of these are crash-worthy - given the implementation of |
| * png_get_tRNS up to 1.5 an app won't crash if it just checks the |
| * result above and fails to check that the variables it passed have |
| * actually been filled in! Note that if the app were to pass the |
| * last, png_color_16p, variable too it couldn't rely on this. |
| */ |
| if (trans_alpha == NULL || num <= 0 || num > 256 || num > *npalette) |
| png_error(pp, "validate: unexpected png_get_tRNS (palette) result"); |
| |
| for (i=0; i<num; ++i) |
| palette[i].alpha = trans_alpha[i]; |
| |
| for (num=*npalette; i<num; ++i) |
| palette[i].alpha = 255; |
| |
| for (; i<256; ++i) |
| palette[i].alpha = 33; /* flag value */ |
| |
| return 1; /* transparency */ |
| } |
| |
| else |
| { |
| /* No palette transparency - just set the alpha channel to opaque. */ |
| int i; |
| |
| for (i=0, num=*npalette; i<num; ++i) |
| palette[i].alpha = 255; |
| |
| for (; i<256; ++i) |
| palette[i].alpha = 55; /* flag value */ |
| |
| return 0; /* no transparency */ |
| } |
| } |
| |
| /* Utility to validate the palette if it should not have changed (the |
| * non-transform case). |
| */ |
| static void |
| standard_palette_validate(standard_display *dp, png_const_structp pp, |
| png_infop pi) |
| { |
| int npalette; |
| store_palette palette; |
| |
| if (read_palette(palette, &npalette, pp, pi) != dp->is_transparent) |
| png_error(pp, "validate: palette transparency changed"); |
| |
| if (npalette != dp->npalette) |
| { |
| size_t pos = 0; |
| char msg[64]; |
| |
| pos = safecat(msg, sizeof msg, pos, "validate: palette size changed: "); |
| pos = safecatn(msg, sizeof msg, pos, dp->npalette); |
| pos = safecat(msg, sizeof msg, pos, " -> "); |
| pos = safecatn(msg, sizeof msg, pos, npalette); |
| png_error(pp, msg); |
| } |
| |
| { |
| int i = npalette; /* npalette is aliased */ |
| |
| while (--i >= 0) |
| if (palette[i].red != dp->palette[i].red || |
| palette[i].green != dp->palette[i].green || |
| palette[i].blue != dp->palette[i].blue || |
| palette[i].alpha != dp->palette[i].alpha) |
| png_error(pp, "validate: PLTE or tRNS chunk changed"); |
| } |
| } |
| |
| /* By passing a 'standard_display' the progressive callbacks can be used |
| * directly by the sequential code, the functions suffixed "_imp" are the |
| * implementations, the functions without the suffix are the callbacks. |
| * |
| * The code for the info callback is split into two because this callback calls |
| * png_read_update_info or png_start_read_image and what gets called depends on |
| * whether the info needs updating (we want to test both calls in pngvalid.) |
| */ |
| static void |
| standard_info_part1(standard_display *dp, png_structp pp, png_infop pi) |
| { |
| if (png_get_bit_depth(pp, pi) != dp->bit_depth) |
| png_error(pp, "validate: bit depth changed"); |
| |
| if (png_get_color_type(pp, pi) != dp->colour_type) |
| png_error(pp, "validate: color type changed"); |
| |
| if (png_get_filter_type(pp, pi) != PNG_FILTER_TYPE_BASE) |
| png_error(pp, "validate: filter type changed"); |
| |
| if (png_get_interlace_type(pp, pi) != dp->interlace_type) |
| png_error(pp, "validate: interlacing changed"); |
| |
| if (png_get_compression_type(pp, pi) != PNG_COMPRESSION_TYPE_BASE) |
| png_error(pp, "validate: compression type changed"); |
| |
| dp->w = png_get_image_width(pp, pi); |
| |
| if (dp->w != standard_width(pp, dp->id)) |
| png_error(pp, "validate: image width changed"); |
| |
| dp->h = png_get_image_height(pp, pi); |
| |
| if (dp->h != standard_height(pp, dp->id)) |
| png_error(pp, "validate: image height changed"); |
| |
| /* Record (but don't check at present) the input sBIT according to the colour |
| * type information. |
| */ |
| { |
| png_color_8p sBIT = 0; |
| |
| if (png_get_sBIT(pp, pi, &sBIT) & PNG_INFO_sBIT) |
| { |
| int sBIT_invalid = 0; |
| |
| if (sBIT == 0) |
| png_error(pp, "validate: unexpected png_get_sBIT result"); |
| |
| if (dp->colour_type & PNG_COLOR_MASK_COLOR) |
| { |
| if (sBIT->red == 0 || sBIT->red > dp->bit_depth) |
| sBIT_invalid = 1; |
| else |
| dp->red_sBIT = sBIT->red; |
| |
| if (sBIT->green == 0 || sBIT->green > dp->bit_depth) |
| sBIT_invalid = 1; |
| else |
| dp->green_sBIT = sBIT->green; |
| |
| if (sBIT->blue == 0 || sBIT->blue > dp->bit_depth) |
| sBIT_invalid = 1; |
| else |
| dp->blue_sBIT = sBIT->blue; |
| } |
| |
| else /* !COLOR */ |
| { |
| if (sBIT->gray == 0 || sBIT->gray > dp->bit_depth) |
| sBIT_invalid = 1; |
| else |
| dp->blue_sBIT = dp->green_sBIT = dp->red_sBIT = sBIT->gray; |
| } |
| |
| /* All 8 bits in tRNS for a palette image are significant - see the |
| * spec. |
| */ |
| if (dp->colour_type & PNG_COLOR_MASK_ALPHA) |
| { |
| if (sBIT->alpha == 0 || sBIT->alpha > dp->bit_depth) |
| sBIT_invalid = 1; |
| else |
| dp->alpha_sBIT = sBIT->alpha; |
| } |
| |
| if (sBIT_invalid) |
| png_error(pp, "validate: sBIT value out of range"); |
| } |
| } |
| |
| /* Important: this is validating the value *before* any transforms have been |
| * put in place. It doesn't matter for the standard tests, where there are |
| * no transforms, but it does for other tests where rowbytes may change after |
| * png_read_update_info. |
| */ |
| if (png_get_rowbytes(pp, pi) != standard_rowsize(pp, dp->id)) |
| png_error(pp, "validate: row size changed"); |
| |
| /* Validate the colour type 3 palette (this can be present on other color |
| * types.) |
| */ |
| standard_palette_validate(dp, pp, pi); |
| |
| /* In any case always check for a tranparent color (notice that the |
| * colour type 3 case must not give a successful return on the get_tRNS call |
| * with these arguments!) |
| */ |
| { |
| png_color_16p trans_color = 0; |
| |
| if (png_get_tRNS(pp, pi, 0, 0, &trans_color) & PNG_INFO_tRNS) |
| { |
| if (trans_color == 0) |
| png_error(pp, "validate: unexpected png_get_tRNS (color) result"); |
| |
| switch (dp->colour_type) |
| { |
| case 0: |
| dp->transparent.red = dp->transparent.green = dp->transparent.blue = |
| trans_color->gray; |
| dp->is_transparent = 1; |
| break; |
| |
| case 2: |
| dp->transparent.red = trans_color->red; |
| dp->transparent.green = trans_color->green; |
| dp->transparent.blue = trans_color->blue; |
| dp->is_transparent = 1; |
| break; |
| |
| case 3: |
| /* Not expected because it should result in the array case |
| * above. |
| */ |
| png_error(pp, "validate: unexpected png_get_tRNS result"); |
| break; |
| |
| default: |
| png_error(pp, "validate: invalid tRNS chunk with alpha image"); |
| } |
| } |
| } |
| |
| /* Read the number of passes - expected to match the value used when |
| * creating the image (interlaced or not). This has the side effect of |
| * turning on interlace handling (if do_interlace is not set.) |
| */ |
| dp->npasses = npasses_from_interlace_type(pp, dp->interlace_type); |
| if (!dp->do_interlace && dp->npasses != png_set_interlace_handling(pp)) |
| png_error(pp, "validate: file changed interlace type"); |
| |
| /* Caller calls png_read_update_info or png_start_read_image now, then calls |
| * part2. |
| */ |
| } |
| |
| /* This must be called *after* the png_read_update_info call to get the correct |
| * 'rowbytes' value, otherwise png_get_rowbytes will refer to the untransformed |
| * image. |
| */ |
| static void |
| standard_info_part2(standard_display *dp, png_const_structp pp, |
| png_const_infop pi, int nImages) |
| { |
| /* Record cbRow now that it can be found. */ |
| dp->pixel_size = bit_size(pp, png_get_color_type(pp, pi), |
| png_get_bit_depth(pp, pi)); |
| dp->bit_width = png_get_image_width(pp, pi) * dp->pixel_size; |
| dp->cbRow = png_get_rowbytes(pp, pi); |
| |
| /* Validate the rowbytes here again. */ |
| if (dp->cbRow != (dp->bit_width+7)/8) |
| png_error(pp, "bad png_get_rowbytes calculation"); |
| |
| /* Then ensure there is enough space for the output image(s). */ |
| store_ensure_image(dp->ps, pp, nImages, dp->cbRow, dp->h); |
| } |
| |
| static void |
| standard_info_imp(standard_display *dp, png_structp pp, png_infop pi, |
| int nImages) |
| { |
| /* Note that the validation routine has the side effect of turning on |
| * interlace handling in the subsequent code. |
| */ |
| standard_info_part1(dp, pp, pi); |
| |
| /* And the info callback has to call this (or png_read_update_info - see |
| * below in the png_modifier code for that variant. |
| */ |
| if (dp->use_update_info) |
| { |
| /* For debugging the effect of multiple calls: */ |
| int i = dp->use_update_info; |
| while (i-- > 0) |
| png_read_update_info(pp, pi); |
| } |
| |
| else |
| png_start_read_image(pp); |
| |
| /* Validate the height, width and rowbytes plus ensure that sufficient buffer |
| * exists for decoding the image. |
| */ |
| standard_info_part2(dp, pp, pi, nImages); |
| } |
| |
| static void |
| standard_info(png_structp pp, png_infop pi) |
| { |
| standard_display *dp = voidcast(standard_display*, |
| png_get_progressive_ptr(pp)); |
| |
| /* Call with nImages==1 because the progressive reader can only produce one |
| * image. |
| */ |
| standard_info_imp(dp, pp, pi, 1 /*only one image*/); |
| } |
| |
| static void |
| progressive_row(png_structp ppIn, png_bytep new_row, png_uint_32 y, int pass) |
| { |
| png_const_structp pp = ppIn; |
| PNG_CONST standard_display *dp = voidcast(standard_display*, |
| png_get_progressive_ptr(pp)); |
| |
| /* When handling interlacing some rows will be absent in each pass, the |
| * callback still gets called, but with a NULL pointer. This is checked |
| * in the 'else' clause below. We need our own 'cbRow', but we can't call |
| * png_get_rowbytes because we got no info structure. |
| */ |
| if (new_row != NULL) |
| { |
| png_bytep row; |
| |
| /* In the case where the reader doesn't do the interlace it gives |
| * us the y in the sub-image: |
| */ |
| if (dp->do_interlace && dp->interlace_type == PNG_INTERLACE_ADAM7) |
| { |
| #ifdef PNG_USER_TRANSFORM_INFO_SUPPORTED |
| /* Use this opportunity to validate the png 'current' APIs: */ |
| if (y != png_get_current_row_number(pp)) |
| png_error(pp, "png_get_current_row_number is broken"); |
| |
| if (pass != png_get_current_pass_number(pp)) |
| png_error(pp, "png_get_current_pass_number is broken"); |
| #endif |
| |
| y = PNG_ROW_FROM_PASS_ROW(y, pass); |
| } |
| |
| /* Validate this just in case. */ |
| if (y >= dp->h) |
| png_error(pp, "invalid y to progressive row callback"); |
| |
| row = store_image_row(dp->ps, pp, 0, y); |
| |
| #ifdef PNG_READ_INTERLACING_SUPPORTED |
| /* Combine the new row into the old: */ |
| if (dp->do_interlace) |
| { |
| if (dp->interlace_type == PNG_INTERLACE_ADAM7) |
| deinterlace_row(row, new_row, dp->pixel_size, dp->w, pass); |
| else |
| row_copy(row, new_row, dp->pixel_size * dp->w); |
| } |
| else |
| png_progressive_combine_row(pp, row, new_row); |
| } else if (dp->interlace_type == PNG_INTERLACE_ADAM7 && |
| PNG_ROW_IN_INTERLACE_PASS(y, pass) && |
| PNG_PASS_COLS(dp->w, pass) > 0) |
| png_error(pp, "missing row in progressive de-interlacing"); |
| #endif /* PNG_READ_INTERLACING_SUPPORTED */ |
| } |
| |
| static void |
| sequential_row(standard_display *dp, png_structp pp, png_infop pi, |
| PNG_CONST int iImage, PNG_CONST int iDisplay) |
| { |
| PNG_CONST int npasses = dp->npasses; |
| PNG_CONST int do_interlace = dp->do_interlace && |
| dp->interlace_type == PNG_INTERLACE_ADAM7; |
| PNG_CONST png_uint_32 height = standard_height(pp, dp->id); |
| PNG_CONST png_uint_32 width = standard_width(pp, dp->id); |
| PNG_CONST png_store* ps = dp->ps; |
| int pass; |
| |
| for (pass=0; pass<npasses; ++pass) |
| { |
| png_uint_32 y; |
| png_uint_32 wPass = PNG_PASS_COLS(width, pass); |
| |
| for (y=0; y<height; ++y) |
| { |
| if (do_interlace) |
| { |
| /* wPass may be zero or this row may not be in this pass. |
| * png_read_row must not be called in either case. |
| */ |
| if (wPass > 0 && PNG_ROW_IN_INTERLACE_PASS(y, pass)) |
| { |
| /* Read the row into a pair of temporary buffers, then do the |
| * merge here into the output rows. |
| */ |
| png_byte row[STANDARD_ROWMAX], display[STANDARD_ROWMAX]; |
| |
| /* The following aids (to some extent) error detection - we can |
| * see where png_read_row wrote. Use opposite values in row and |
| * display to make this easier. Don't use 0xff (which is used in |
| * the image write code to fill unused bits) or 0 (which is a |
| * likely value to overwrite unused bits with). |
| */ |
| memset(row, 0xc5, sizeof row); |
| memset(display, 0x5c, sizeof display); |
| |
| png_read_row(pp, row, display); |
| |
| if (iImage >= 0) |
| deinterlace_row(store_image_row(ps, pp, iImage, y), row, |
| dp->pixel_size, dp->w, pass); |
| |
| if (iDisplay >= 0) |
| deinterlace_row(store_image_row(ps, pp, iDisplay, y), display, |
| dp->pixel_size, dp->w, pass); |
| } |
| } |
| else |
| png_read_row(pp, |
| iImage >= 0 ? store_image_row(ps, pp, iImage, y) : NULL, |
| iDisplay >= 0 ? store_image_row(ps, pp, iDisplay, y) : NULL); |
| } |
| } |
| |
| /* And finish the read operation (only really necessary if the caller wants |
| * to find additional data in png_info from chunks after the last IDAT.) |
| */ |
| png_read_end(pp, pi); |
| } |
| |
| static void |
| standard_row_validate(standard_display *dp, png_const_structp pp, |
| int iImage, int iDisplay, png_uint_32 y) |
| { |
| int where; |
| png_byte std[STANDARD_ROWMAX]; |
| |
| /* The row must be pre-initialized to the magic number here for the size |
| * tests to pass: |
| */ |
| memset(std, 178, sizeof std); |
| standard_row(pp, std, dp->id, y); |
| |
| /* At the end both the 'row' and 'display' arrays should end up identical. |
| * In earlier passes 'row' will be partially filled in, with only the pixels |
| * that have been read so far, but 'display' will have those pixels |
| * replicated to fill the unread pixels while reading an interlaced image. |
| #if PNG_LIBPNG_VER < 10506 |
| * The side effect inside the libpng sequential reader is that the 'row' |
| * array retains the correct values for unwritten pixels within the row |
| * bytes, while the 'display' array gets bits off the end of the image (in |
| * the last byte) trashed. Unfortunately in the progressive reader the |
| * row bytes are always trashed, so we always do a pixel_cmp here even though |
| * a memcmp of all cbRow bytes will succeed for the sequential reader. |
| #endif |
| */ |
| if (iImage >= 0 && |
| (where = pixel_cmp(std, store_image_row(dp->ps, pp, iImage, y), |
| dp->bit_width)) != 0) |
| { |
| char msg[64]; |
| sprintf(msg, "PNG image row[%d][%d] changed from %.2x to %.2x", y, |
| where-1, std[where-1], |
| store_image_row(dp->ps, pp, iImage, y)[where-1]); |
| png_error(pp, msg); |
| } |
| |
| #if PNG_LIBPNG_VER < 10506 |
| /* In this case use pixel_cmp because we need to compare a partial |
| * byte at the end of the row if the row is not an exact multiple |
| * of 8 bits wide. (This is fixed in libpng-1.5.6 and pixel_cmp is |
| * changed to match!) |
| */ |
| #endif |
| if (iDisplay >= 0 && |
| (where = pixel_cmp(std, store_image_row(dp->ps, pp, iDisplay, y), |
| dp->bit_width)) != 0) |
| { |
| char msg[64]; |
| sprintf(msg, "display row[%d][%d] changed from %.2x to %.2x", y, |
| where-1, std[where-1], |
| store_image_row(dp->ps, pp, iDisplay, y)[where-1]); |
| png_error(pp, msg); |
| } |
| } |
| |
| static void |
| standard_image_validate(standard_display *dp, png_const_structp pp, int iImage, |
| int iDisplay) |
| { |
| png_uint_32 y; |
| |
| if (iImage >= 0) |
| store_image_check(dp->ps, pp, iImage); |
| |
| if (iDisplay >= 0) |
| store_image_check(dp->ps, pp, iDisplay); |
| |
| for (y=0; y<dp->h; ++y) |
| standard_row_validate(dp, pp, iImage, iDisplay, y); |
| |
| /* This avoids false positives if the validation code is never called! */ |
| dp->ps->validated = 1; |
| } |
| |
| static void |
| standard_end(png_structp ppIn, png_infop pi) |
| { |
| png_const_structp pp = ppIn; |
| standard_display *dp = voidcast(standard_display*, |
| png_get_progressive_ptr(pp)); |
| |
| UNUSED(pi) |
| |
| /* Validate the image - progressive reading only produces one variant for |
| * interlaced images. |
| */ |
| standard_image_validate(dp, pp, 0, -1); |
| } |
| |
| /* A single test run checking the standard image to ensure it is not damaged. */ |
| static void |
| standard_test(png_store* PNG_CONST psIn, png_uint_32 PNG_CONST id, |
| int do_interlace, int use_update_info) |
| { |
| standard_display d; |
| context(psIn, fault); |
| |
| /* Set up the display (stack frame) variables from the arguments to the |
| * function and initialize the locals that are filled in later. |
| */ |
| standard_display_init(&d, psIn, id, do_interlace, use_update_info); |
| |
| /* Everything is protected by a Try/Catch. The functions called also |
| * typically have local Try/Catch blocks. |
| */ |
| Try |
| { |
| png_structp pp; |
| png_infop pi; |
| |
| /* Get a png_struct for reading the image. This will throw an error if it |
| * fails, so we don't need to check the result. |
| */ |
| pp = set_store_for_read(d.ps, &pi, d.id, |
| d.do_interlace ? (d.ps->progressive ? |
| "pngvalid progressive deinterlacer" : |
| "pngvalid sequential deinterlacer") : (d.ps->progressive ? |
| "progressive reader" : "sequential reader")); |
| |
| /* Initialize the palette correctly from the png_store_file. */ |
| standard_palette_init(&d); |
| |
| /* Introduce the correct read function. */ |
| if (d.ps->progressive) |
| { |
| png_set_progressive_read_fn(pp, &d, standard_info, progressive_row, |
| standard_end); |
| |
| /* Now feed data into the reader until we reach the end: */ |
| store_progressive_read(d.ps, pp, pi); |
| } |
| else |
| { |
| /* Note that this takes the store, not the display. */ |
| png_set_read_fn(pp, d.ps, store_read); |
| |
| /* Check the header values: */ |
| png_read_info(pp, pi); |
| |
| /* The code tests both versions of the images that the sequential |
| * reader can produce. |
| */ |
| standard_info_imp(&d, pp, pi, 2 /*images*/); |
| |
| /* Need the total bytes in the image below; we can't get to this point |
| * unless the PNG file values have been checked against the expected |
| * values. |
| */ |
| { |
| sequential_row(&d, pp, pi, 0, 1); |
| |
| /* After the last pass loop over the rows again to check that the |
| * image is correct. |
| */ |
| if (!d.speed) |
| standard_image_validate(&d, pp, 0, 1); |
| else |
| d.ps->validated = 1; |
| } |
| } |
| |
| /* Check for validation. */ |
| if (!d.ps->validated) |
| png_error(pp, "image read failed silently"); |
| |
| /* Successful completion. */ |
| } |
| |
| Catch(fault) |
| d.ps = fault; /* make sure this hasn't been clobbered. */ |
| |
| /* In either case clean up the store. */ |
| store_read_reset(d.ps); |
| } |
| |
| static int |
| test_standard(png_modifier* PNG_CONST pm, png_byte PNG_CONST colour_type, |
| int bdlo, int PNG_CONST bdhi) |
| { |
| for (; bdlo <= bdhi; ++bdlo) |
| { |
| int interlace_type; |
| |
| for (interlace_type = PNG_INTERLACE_NONE; |
| interlace_type < PNG_INTERLACE_LAST; ++interlace_type) |
| { |
| standard_test(&pm->this, FILEID(colour_type, DEPTH(bdlo), 0/*palette*/, |
| interlace_type, 0, 0, 0), 0/*do_interlace*/, pm->use_update_info); |
| |
| if (fail(pm)) |
| return 0; |
| } |
| } |
| |
| return 1; /* keep going */ |
| } |
| |
| static void |
| perform_standard_test(png_modifier *pm) |
| { |
| /* Test each colour type over the valid range of bit depths (expressed as |
| * log2(bit_depth) in turn, stop as soon as any error is detected. |
| */ |
| if (!test_standard(pm, 0, 0, READ_BDHI)) |
| return; |
| |
| if (!test_standard(pm, 2, 3, READ_BDHI)) |
| return; |
| |
| if (!test_standard(pm, 3, 0, 3)) |
| return; |
| |
| if (!test_standard(pm, 4, 3, READ_BDHI)) |
| return; |
| |
| if (!test_standard(pm, 6, 3, READ_BDHI)) |
| return; |
| } |
| |
| |
| /********************************** SIZE TESTS ********************************/ |
| static int |
| test_size(png_modifier* PNG_CONST pm, png_byte PNG_CONST colour_type, |
| int bdlo, int PNG_CONST bdhi) |
| { |
| /* Run the tests on each combination. |
| * |
| * NOTE: on my 32 bit x86 each of the following blocks takes |
| * a total of 3.5 seconds if done across every combo of bit depth |
| * width and height. This is a waste of time in practice, hence the |
| * hinc and winc stuff: |
| */ |
| static PNG_CONST png_byte hinc[] = {1, 3, 11, 1, 5}; |
| static PNG_CONST png_byte winc[] = {1, 9, 5, 7, 1}; |
| for (; bdlo <= bdhi; ++bdlo) |
| { |
| png_uint_32 h, w; |
| |
| for (h=1; h<=16; h+=hinc[bdlo]) for (w=1; w<=16; w+=winc[bdlo]) |
| { |
| /* First test all the 'size' images against the sequential |
| * reader using libpng to deinterlace (where required.) This |
| * validates the write side of libpng. There are four possibilities |
| * to validate. |
| */ |
| standard_test(&pm->this, FILEID(colour_type, DEPTH(bdlo), 0/*palette*/, |
| PNG_INTERLACE_NONE, w, h, 0), 0/*do_interlace*/, |
| pm->use_update_info); |
| |
| if (fail(pm)) |
| return 0; |
| |
| standard_test(&pm->this, FILEID(colour_type, DEPTH(bdlo), 0/*palette*/, |
| PNG_INTERLACE_NONE, w, h, 1), 0/*do_interlace*/, |
| pm->use_update_info); |
| |
| if (fail(pm)) |
| return 0; |
| |
| standard_test(&pm->this, FILEID(colour_type, DEPTH(bdlo), 0/*palette*/, |
| PNG_INTERLACE_ADAM7, w, h, 0), 0/*do_interlace*/, |
| pm->use_update_info); |
| |
| if (fail(pm)) |
| return 0; |
| |
| standard_test(&pm->this, FILEID(colour_type, DEPTH(bdlo), 0/*palette*/, |
| PNG_INTERLACE_ADAM7, w, h, 1), 0/*do_interlace*/, |
| pm->use_update_info); |
| |
| if (fail(pm)) |
| return 0; |
| |
| /* Now validate the interlaced read side - do_interlace true, |
| * in the progressive case this does actually make a difference |
| * to the code used in the non-interlaced case too. |
| */ |
| standard_test(&pm->this, FILEID(colour_type, DEPTH(bdlo), 0/*palette*/, |
| PNG_INTERLACE_NONE, w, h, 0), 1/*do_interlace*/, |
| pm->use_update_info); |
| |
| if (fail(pm)) |
| return 0; |
| |
| standard_test(&pm->this, FILEID(colour_type, DEPTH(bdlo), 0/*palette*/, |
| PNG_INTERLACE_ADAM7, w, h, 0), 1/*do_interlace*/, |
| pm->use_update_info); |
| |
| if (fail(pm)) |
| return 0; |
| } |
| } |
| |
| return 1; /* keep going */ |
| } |
| |
| static void |
| perform_size_test(png_modifier *pm) |
| { |
| /* Test each colour type over the valid range of bit depths (expressed as |
| * log2(bit_depth) in turn, stop as soon as any error is detected. |
| */ |
| if (!test_size(pm, 0, 0, READ_BDHI)) |
| return; |
| |
| if (!test_size(pm, 2, 3, READ_BDHI)) |
| return; |
| |
| /* For the moment don't do the palette test - it's a waste of time when |
| * compared to the grayscale test. |
| */ |
| #if 0 |
| if (!test_size(pm, 3, 0, 3)) |
| return; |
| #endif |
| |
| if (!test_size(pm, 4, 3, READ_BDHI)) |
| return; |
| |
| if (!test_size(pm, 6, 3, READ_BDHI)) |
| return; |
| } |
| |
| |
| /******************************* TRANSFORM TESTS ******************************/ |
| #ifdef PNG_READ_TRANSFORMS_SUPPORTED |
| /* A set of tests to validate libpng image transforms. The possibilities here |
| * are legion because the transforms can be combined in a combinatorial |
| * fashion. To deal with this some measure of restraint is required, otherwise |
| * the tests would take forever. |
| */ |
| typedef struct image_pixel |
| { |
| /* A local (pngvalid) representation of a PNG pixel, in all its |
| * various forms. |
| */ |
| unsigned int red, green, blue, alpha; /* For non-palette images. */ |
| unsigned int palette_index; /* For a palette image. */ |
| png_byte colour_type; /* As in the spec. */ |
| png_byte bit_depth; /* Defines bit size in row */ |
| png_byte sample_depth; /* Scale of samples */ |
| int have_tRNS; /* tRNS chunk may need processing */ |
| |
| /* For checking the code calculates double precision floating point values |
| * along with an error value, accumulated from the transforms. Because an |
| * sBIT setting allows larger error bounds (indeed, by the spec, apparently |
| * up to just less than +/-1 in the scaled value) the *lowest* sBIT for each |
| * channel is stored. This sBIT value is folded in to the stored error value |
| * at the end of the application of the transforms to the pixel. |
| */ |
| double redf, greenf, bluef, alphaf; |
| double rede, greene, bluee, alphae; |
| png_byte red_sBIT, green_sBIT, blue_sBIT, alpha_sBIT; |
| } image_pixel; |
| |
| /* Shared utility function, see below. */ |
| static void |
| image_pixel_setf(image_pixel *this, unsigned int max) |
| { |
| this->redf = this->red / (double)max; |
| this->greenf = this->green / (double)max; |
| this->bluef = this->blue / (double)max; |
| this->alphaf = this->alpha / (double)max; |
| |
| if (this->red < max) |
| this->rede = this->redf * DBL_EPSILON; |
| else |
| this->rede = 0; |
| if (this->green < max) |
| this->greene = this->greenf * DBL_EPSILON; |
| else |
| this->greene = 0; |
| if (this->blue < max) |
| this->bluee = this->bluef * DBL_EPSILON; |
| else |
| this->bluee = 0; |
| if (this->alpha < max) |
| this->alphae = this->alphaf * DBL_EPSILON; |
| else |
| this->alphae = 0; |
| } |
| |
| /* Initialize the structure for the next pixel - call this before doing any |
| * transforms and call it for each pixel since all the fields may need to be |
| * reset. |
| */ |
| static void |
| image_pixel_init(image_pixel *this, png_const_bytep row, png_byte colour_type, |
| png_byte bit_depth, png_uint_32 x, store_palette palette) |
| { |
| PNG_CONST png_byte sample_depth = (png_byte)(colour_type == |
| PNG_COLOR_TYPE_PALETTE ? 8 : bit_depth); |
| PNG_CONST unsigned int max = (1U<<sample_depth)-1; |
| |
| /* Initially just set everything to the same number and the alpha to opaque. |
| * Note that this currently assumes a simple palette where entry x has colour |
| * rgb(x,x,x)! |
| */ |
| this->palette_index = this->red = this->green = this->blue = |
| sample(row, colour_type, bit_depth, x, 0); |
| this->alpha = max; |
| this->red_sBIT = this->green_sBIT = this->blue_sBIT = this->alpha_sBIT = |
| sample_depth; |
| |
| /* Then override as appropriate: */ |
| if (colour_type == 3) /* palette */ |
| { |
| /* This permits the caller to default to the sample value. */ |
| if (palette != 0) |
| { |
| PNG_CONST unsigned int i = this->palette_index; |
| |
| this->red = palette[i].red; |
| this->green = palette[i].green; |
| this->blue = palette[i].blue; |
| this->alpha = palette[i].alpha; |
| } |
| } |
| |
| else /* not palette */ |
| { |
| unsigned int i = 0; |
| |
| if (colour_type & 2) |
| { |
| this->green = sample(row, colour_type, bit_depth, x, 1); |
| this->blue = sample(row, colour_type, bit_depth, x, 2); |
| i = 2; |
| } |
| if (colour_type & 4) |
| this->alpha = sample(row, colour_type, bit_depth, x, ++i); |
| } |
| |
| /* Calculate the scaled values, these are simply the values divided by |
| * 'max' and the error is initialized to the double precision epsilon value |
| * from the header file. |
| */ |
| image_pixel_setf(this, max); |
| |
| /* Store the input information for use in the transforms - these will |
| * modify the information. |
| */ |
| this->colour_type = colour_type; |
| this->bit_depth = bit_depth; |
| this->sample_depth = sample_depth; |
| this->have_tRNS = 0; |
| } |
| |
| /* Convert a palette image to an rgb image. This necessarily converts the tRNS |
| * chunk at the same time, because the tRNS will be in palette form. The way |
| * palette validation works means that the original palette is never updated, |
| * instead the image_pixel value from the row contains the RGB of the |
| * corresponding palette entry and *this* is updated. Consequently this routine |
| * only needs to change the colour type information. |
| */ |
| static void |
| image_pixel_convert_PLTE(image_pixel *this) |
| { |
| if (this->colour_type == PNG_COLOR_TYPE_PALETTE) |
| { |
| if (this->have_tRNS) |
| { |
| this->colour_type = PNG_COLOR_TYPE_RGB_ALPHA; |
| this->have_tRNS = 0; |
| } |
| else |
| this->colour_type = PNG_COLOR_TYPE_RGB; |
| |
| /* The bit depth of the row changes at this point too (notice that this is |
| * the row format, not the sample depth, which is separate.) |
| */ |
| this->bit_depth = 8; |
| } |
| } |
| |
| /* Add an alpha channel; this will import the tRNS information because tRNS is |
| * not valid in an alpha image. The bit depth will invariably be set to at |
| * least 8. Palette images will be converted to alpha (using the above API). |
| */ |
| static void |
| image_pixel_add_alpha(image_pixel *this, PNG_CONST standard_display *display) |
| { |
| if (this->colour_type == PNG_COLOR_TYPE_PALETTE) |
| image_pixel_convert_PLTE(this); |
| |
| if ((this->colour_type & PNG_COLOR_MASK_ALPHA) == 0) |
| { |
| if (this->colour_type == PNG_COLOR_TYPE_GRAY) |
| { |
| if (this->bit_depth < 8) |
| this->bit_depth = 8; |
| |
| if (this->have_tRNS) |
| { |
| this->have_tRNS = 0; |
| |
| /* Check the input, original, channel value here against the |
| * original tRNS gray chunk valie. |
| */ |
| if (this->red == display->transparent.red) |
| this->alphaf = 0; |
| else |
| this->alphaf = 1; |
| } |
| else |
| this->alphaf = 1; |
| |
| this->colour_type = PNG_COLOR_TYPE_GRAY_ALPHA; |
| } |
| |
| else if (this->colour_type == PNG_COLOR_TYPE_RGB) |
| { |
| if (this->have_tRNS) |
| { |
| this->have_tRNS = 0; |
| |
| /* Again, check the exact input values, not the current transformed |
| * value! |
| */ |
| if (this->red == display->transparent.red && |
| this->green == display->transparent.green && |
| this->blue == display->transparent.blue) |
| this->alphaf = 0; |
| else |
| this->alphaf = 1; |
| |
| this->colour_type = PNG_COLOR_TYPE_RGB_ALPHA; |
| } |
| } |
| |
| /* The error in the alpha is zero and the sBIT value comes from the |
| * original sBIT data (actually it will always be the original bit depth). |
| */ |
| this->alphae = 0; |
| this->alpha_sBIT = display->alpha_sBIT; |
| } |
| } |
| |
| struct transform_display; |
| typedef struct image_transform |
| { |
| /* The name of this transform: a string. */ |
| PNG_CONST char *name; |
| |
| /* Each transform can be disabled from the command line: */ |
| int enable; |
| |
| /* The global list of transforms; read only. */ |
| struct image_transform *PNG_CONST list; |
| |
| /* The global count of the number of times this transform has been set on an |
| * image. |
| */ |
| unsigned int global_use; |
| |
| /* The local count of the number of times this transform has been set. */ |
| unsigned int local_use; |
| |
| /* The next transform in the list, each transform must call its own next |
| * transform after it has processed the pixel successfully. |
| */ |
| PNG_CONST struct image_transform *next; |
| |
| /* A single transform for the image, expressed as a series of function |
| * callbacks and some space for values. |
| * |
| * First a callback to add any required modifications to the png_modifier; |
| * this gets called just before the modifier is set up for read. |
| */ |
| void (*ini)(PNG_CONST struct image_transform *this, |
| struct transform_display *that); |
| |
| /* And a callback to set the transform on the current png_read_struct: |
| */ |
| void (*set)(PNG_CONST struct image_transform *this, |
| struct transform_display *that, png_structp pp, png_infop pi); |
| |
| /* Then a transform that takes an input pixel in one PNG format or another |
| * and modifies it by a pngvalid implementation of the transform (thus |
| * duplicating the libpng intent without, we hope, duplicating the bugs |
| * in the libpng implementation!) The png_structp is solely to allow error |
| * reporting via png_error and png_warning. |
| */ |
| void (*mod)(PNG_CONST struct image_transform *this, image_pixel *that, |
| png_const_structp pp, PNG_CONST struct transform_display *display); |
| |
| /* Add this transform to the list and return true if the transform is |
| * meaningful for this colour type and bit depth - if false then the |
| * transform should have no effect on the image so there's not a lot of |
| * point running it. |
| */ |
| int (*add)(struct image_transform *this, |
| PNG_CONST struct image_transform **that, png_byte colour_type, |
| png_byte bit_depth); |
| } image_transform; |
| |
| typedef struct transform_display |
| { |
| standard_display this; |
| |
| /* Parameters */ |
| png_modifier* pm; |
| PNG_CONST image_transform* transform_list; |
| |
| /* Local variables */ |
| png_byte output_colour_type; |
| png_byte output_bit_depth; |
| |
| /* Modifications (not necessarily used.) */ |
| gama_modification gama_mod; |
| chrm_modification chrm_mod; |
| srgb_modification srgb_mod; |
| } transform_display; |
| |
| /* Set sRGB, cHRM and gAMA transforms as required by the current encoding. */ |
| static void |
| transform_set_encoding(transform_display *this) |
| { |
| /* Set up the png_modifier '_current' fields then use these to determine how |
| * to add appropriate chunks. |
| */ |
| png_modifier *pm = this->pm; |
| |
| modifier_set_encoding(pm); |
| |
| if (modifier_color_encoding_is_set(pm)) |
| { |
| if (modifier_color_encoding_is_sRGB(pm)) |
| srgb_modification_init(&this->srgb_mod, pm, PNG_sRGB_INTENT_ABSOLUTE); |
| |
| else |
| { |
| /* Set gAMA and cHRM separately. */ |
| gama_modification_init(&this->gama_mod, pm, pm->current_gamma); |
| |
| if (pm->current_encoding != 0) |
| chrm_modification_init(&this->chrm_mod, pm, pm->current_encoding); |
| } |
| } |
| } |
| |
| /* Three functions to end the list: */ |
| static void |
| image_transform_ini_end(PNG_CONST image_transform *this, |
| transform_display *that) |
| { |
| UNUSED(this) |
| UNUSED(that) |
| } |
| |
| static void |
| image_transform_set_end(PNG_CONST image_transform *this, |
| transform_display *that, png_structp pp, png_infop pi) |
| { |
| UNUSED(this) |
| UNUSED(that) |
| UNUSED(pp) |
| UNUSED(pi) |
| } |
| |
| /* At the end of the list recalculate the output image pixel value from the |
| * double precision values set up by the preceding 'mod' calls: |
| */ |
| static unsigned int |
| sample_scale(double sample_value, unsigned int scale) |
| { |
| sample_value = floor(sample_value * scale + .5); |
| |
| /* Return NaN as 0: */ |
| if (!(sample_value > 0)) |
| sample_value = 0; |
| else if (sample_value > scale) |
| sample_value = scale; |
| |
| return (unsigned int)sample_value; |
| } |
| |
| static void |
| image_transform_mod_end(PNG_CONST image_transform *this, image_pixel *that, |
| png_const_structp pp, PNG_CONST transform_display *display) |
| { |
| PNG_CONST unsigned int scale = (1U<<that->sample_depth)-1; |
| |
| UNUSED(this) |
| UNUSED(pp) |
| UNUSED(display) |
| |
| /* At the end recalculate the digitized red green and blue values according |
| * to the current sample_depth of the pixel. |
| * |
| * The sample value is simply scaled to the maximum, checking for over |
| * and underflow (which can both happen for some image transforms, |
| * including simple size scaling, though libpng doesn't do that at present. |
| */ |
| that->red = sample_scale(that->redf, scale); |
| |
| /* The error value is increased, at the end, according to the lowest sBIT |
| * value seen. Common sense tells us that the intermediate integer |
| * representations are no more accurate than +/- 0.5 in the integral values, |
| * the sBIT allows the implementation to be worse than this. In addition the |
| * PNG specification actually permits any error within the range (-1..+1), |
| * but that is ignored here. Instead the final digitized value is compared, |
| * below to the digitized value of the error limits - this has the net effect |
| * of allowing (almost) +/-1 in the output value. It's difficult to see how |
| * any algorithm that digitizes intermediate results can be more accurate. |
| */ |
| that->rede += 1./(2*((1U<<that->red_sBIT)-1)); |
| |
| if (that->colour_type & PNG_COLOR_MASK_COLOR) |
| { |
| that->green = sample_scale(that->greenf, scale); |
| that->blue = sample_scale(that->bluef, scale); |
| that->greene += 1./(2*((1U<<that->green_sBIT)-1)); |
| that->bluee += 1./(2*((1U<<that->blue_sBIT)-1)); |
| } |
| else |
| { |
| that->blue = that->green = that->red; |
| that->bluef = that->greenf = that->redf; |
| that->bluee = that->greene = that->rede; |
| } |
| |
| if ((that->colour_type & PNG_COLOR_MASK_ALPHA) || |
| that->colour_type == PNG_COLOR_TYPE_PALETTE) |
| { |
| that->alpha = sample_scale(that->alphaf, scale); |
| that->alphae += 1./(2*((1U<<that->alpha_sBIT)-1)); |
| } |
| else |
| { |
| that->alpha = scale; /* opaque */ |
| that->alpha = 1; /* Override this. */ |
| that->alphae = 0; /* It's exact ;-) */ |
| } |
| } |
| |
| /* Static 'end' structure: */ |
| static image_transform image_transform_end = |
| { |
| "(end)", /* name */ |
| 1, /* enable */ |
| 0, /* list */ |
| 0, /* global_use */ |
| 0, /* local_use */ |
| 0, /* next */ |
| image_transform_ini_end, |
| image_transform_set_end, |
| image_transform_mod_end, |
| 0 /* never called, I want it to crash if it is! */ |
| }; |
| |
| /* Reader callbacks and implementations, where they differ from the standard |
| * ones. |
| */ |
| static void |
| transform_display_init(transform_display *dp, png_modifier *pm, png_uint_32 id, |
| PNG_CONST image_transform *transform_list) |
| { |
| memset(dp, 0, sizeof *dp); |
| |
| /* Standard fields */ |
| standard_display_init(&dp->this, &pm->this, id, 0/*do_interlace*/, |
| pm->use_update_info); |
| |
| /* Parameter fields */ |
| dp->pm = pm; |
| dp->transform_list = transform_list; |
| |
| /* Local variable fields */ |
| dp->output_colour_type = 255; /* invalid */ |
| dp->output_bit_depth = 255; /* invalid */ |
| } |
| |
| static void |
| transform_info_imp(transform_display *dp, png_structp pp, png_infop pi) |
| { |
| /* Reuse the standard stuff as appropriate. */ |
| standard_info_part1(&dp->this, pp, pi); |
| |
| /* Now set the list of transforms. */ |
| dp->transform_list->set(dp->transform_list, dp, pp, pi); |
| |
| /* Update the info structure for these transforms: */ |
| { |
| int i = dp->this.use_update_info; |
| /* Always do one call, even if use_update_info is 0. */ |
| do |
| png_read_update_info(pp, pi); |
| while (--i > 0); |
| } |
| |
| /* And get the output information into the standard_display */ |
| standard_info_part2(&dp->this, pp, pi, 1/*images*/); |
| |
| /* Plus the extra stuff we need for the transform tests: */ |
| dp->output_colour_type = png_get_color_type(pp, pi); |
| dp->output_bit_depth = png_get_bit_depth(pp, pi); |
| |
| /* Validate the combination of colour type and bit depth that we are getting |
| * out of libpng; the semantics of something not in the PNG spec are, at |
| * best, unclear. |
| */ |
| switch (dp->output_colour_type) |
| { |
| case PNG_COLOR_TYPE_PALETTE: |
| if (dp->output_bit_depth > 8) goto error; |
| /*FALL THROUGH*/ |
| case PNG_COLOR_TYPE_GRAY: |
| if (dp->output_bit_depth == 1 || dp->output_bit_depth == 2 || |
| dp->output_bit_depth == 4) |
| break; |
| /*FALL THROUGH*/ |
| default: |
| if (dp->output_bit_depth == 8 || dp->output_bit_depth == 16) |
| break; |
| /*FALL THROUGH*/ |
| error: |
| { |
| char message[128]; |
| size_t pos; |
| |
| pos = safecat(message, sizeof message, 0, |
| "invalid final bit depth: colour type("); |
| pos = safecatn(message, sizeof message, pos, dp->output_colour_type); |
| pos = safecat(message, sizeof message, pos, ") with bit depth: "); |
| pos = safecatn(message, sizeof message, pos, dp->output_bit_depth); |
| |
| png_error(pp, message); |
| } |
| } |
| |
| /* Use a test pixel to check that the output agrees with what we expect - |
| * this avoids running the whole test if the output is unexpected. |
| */ |
| { |
| image_pixel test_pixel; |
| |
| memset(&test_pixel, 0, sizeof test_pixel); |
| test_pixel.colour_type = dp->this.colour_type; /* input */ |
| test_pixel.bit_depth = dp->this.bit_depth; |
| if (test_pixel.colour_type == PNG_COLOR_TYPE_PALETTE) |
| test_pixel.sample_depth = 8; |
| else |
| test_pixel.sample_depth = test_pixel.bit_depth; |
| /* Don't need sBIT here, but it must be set to non-zero to avoid |
| * arithmetic overflows. |
| */ |
| test_pixel.have_tRNS = dp->this.is_transparent; |
| test_pixel.red_sBIT = test_pixel.green_sBIT = test_pixel.blue_sBIT = |
| test_pixel.alpha_sBIT = test_pixel.sample_depth; |
| |
| dp->transform_list->mod(dp->transform_list, &test_pixel, pp, dp); |
| |
| if (test_pixel.colour_type != dp->output_colour_type) |
| { |
| char message[128]; |
| size_t pos = safecat(message, sizeof message, 0, "colour type "); |
| |
| pos = safecatn(message, sizeof message, pos, dp->output_colour_type); |
| pos = safecat(message, sizeof message, pos, " expected "); |
| pos = safecatn(message, sizeof message, pos, test_pixel.colour_type); |
| |
| png_error(pp, message); |
| } |
| |
| if (test_pixel.bit_depth != dp->output_bit_depth) |
| { |
| char message[128]; |
| size_t pos = safecat(message, sizeof message, 0, "bit depth "); |
| |
| pos = safecatn(message, sizeof message, pos, dp->output_bit_depth); |
| pos = safecat(message, sizeof message, pos, " expected "); |
| pos = safecatn(message, sizeof message, pos, test_pixel.bit_depth); |
| |
| png_error(pp, message); |
| } |
| |
| /* If both bit depth and colour type are correct check the sample depth. |
| * I believe these are both internal errors. |
| */ |
| if (test_pixel.colour_type == PNG_COLOR_TYPE_PALETTE) |
| { |
| if (test_pixel.sample_depth != 8) /* oops - internal error! */ |
| png_error(pp, "pngvalid: internal: palette sample depth not 8"); |
| } |
| else if (test_pixel.sample_depth != dp->output_bit_depth) |
| { |
| char message[128]; |
| size_t pos = safecat(message, sizeof message, 0, |
| "internal: sample depth "); |
| |
| pos = safecatn(message, sizeof message, pos, dp->output_bit_depth); |
| pos = safecat(message, sizeof message, pos, " expected "); |
| pos = safecatn(message, sizeof message, pos, test_pixel.sample_depth); |
| |
| png_error(pp, message); |
| } |
| } |
| } |
| |
| static void |
| transform_info(png_structp pp, png_infop pi) |
| { |
| transform_info_imp(voidcast(transform_display*, png_get_progressive_ptr(pp)), |
| pp, pi); |
| } |
| |
| static void |
| transform_range_check(png_const_structp pp, unsigned int r, unsigned int g, |
| unsigned int b, unsigned int a, unsigned int in_digitized, double in, |
| unsigned int out, png_byte sample_depth, double err, double limit, |
| PNG_CONST char *name, double digitization_error) |
| { |
| /* Compare the scaled, digitzed, values of our local calculation (in+-err) |
| * with the digitized values libpng produced; 'sample_depth' is the actual |
| * digitization depth of the libpng output colors (the bit depth except for |
| * palette images where it is always 8.) The check on 'err' is to detect |
| * internal errors in pngvalid itself. |
| */ |
| unsigned int max = (1U<<sample_depth)-1; |
| double in_min = ceil((in-err)*max - digitization_error); |
| double in_max = floor((in+err)*max + digitization_error); |
| if (err > limit || !(out >= in_min && out <= in_max)) |
| { |
| char message[256]; |
| size_t pos; |
| |
| pos = safecat(message, sizeof message, 0, name); |
| pos = safecat(message, sizeof message, pos, " output value error: rgba("); |
| pos = safecatn(message, sizeof message, pos, r); |
| pos = safecat(message, sizeof message, pos, ","); |
| pos = safecatn(message, sizeof message, pos, g); |
| pos = safecat(message, sizeof message, pos, ","); |
| pos = safecatn(message, sizeof message, pos, b); |
| pos = safecat(message, sizeof message, pos, ","); |
| pos = safecatn(message, sizeof message, pos, a); |
| pos = safecat(message, sizeof message, pos, "): "); |
| pos = safecatn(message, sizeof message, pos, out); |
| pos = safecat(message, sizeof message, pos, " expected: "); |
| pos = safecatn(message, sizeof message, pos, in_digitized); |
| pos = safecat(message, sizeof message, pos, " ("); |
| pos = safecatd(message, sizeof message, pos, (in-err)*max, 3); |
| pos = safecat(message, sizeof message, pos, ".."); |
| pos = safecatd(message, sizeof message, pos, (in+err)*max, 3); |
| pos = safecat(message, sizeof message, pos, ")"); |
| |
| png_error(pp, message); |
| } |
| } |
| |
| static void |
| transform_image_validate(transform_display *dp, png_const_structp pp, |
| png_infop pi) |
| { |
| /* Constants for the loop below: */ |
| PNG_CONST png_store* PNG_CONST ps = dp->this.ps; |
| PNG_CONST png_byte in_ct = dp->this.colour_type; |
| PNG_CONST png_byte in_bd = dp->this.bit_depth; |
| PNG_CONST png_uint_32 w = dp->this.w; |
| PNG_CONST png_uint_32 h = dp->this.h; |
| PNG_CONST png_byte out_ct = dp->output_colour_type; |
| PNG_CONST png_byte out_bd = dp->output_bit_depth; |
| PNG_CONST png_byte sample_depth = (png_byte)(out_ct == |
| PNG_COLOR_TYPE_PALETTE ? 8 : out_bd); |
| PNG_CONST png_byte red_sBIT = dp->this.red_sBIT; |
| PNG_CONST png_byte green_sBIT = dp->this.green_sBIT; |
| PNG_CONST png_byte blue_sBIT = dp->this.blue_sBIT; |
| PNG_CONST png_byte alpha_sBIT = dp->this.alpha_sBIT; |
| PNG_CONST int have_tRNS = dp->this.is_transparent; |
| double digitization_error; |
| |
| store_palette out_palette; |
| png_uint_32 y; |
| |
| UNUSED(pi) |
| |
| /* Check for row overwrite errors */ |
| store_image_check(dp->this.ps, pp, 0); |
| |
| /* Read the palette corresponding to the output if the output colour type |
| * indicates a palette, othewise set out_palette to garbage. |
| */ |
| if (out_ct == PNG_COLOR_TYPE_PALETTE) |
| { |
| /* Validate that the palette count itself has not changed - this is not |
| * expected. |
| */ |
| int npalette = (-1); |
| |
| (void)read_palette(out_palette, &npalette, pp, pi); |
| if (npalette != dp->this.npalette) |
| png_error(pp, "unexpected change in palette size"); |
| |
| digitization_error = .5; |
| } |
| else |
| { |
| png_byte in_sample_depth; |
| |
| memset(out_palette, 0x5e, sizeof out_palette); |
| |
| /* assume-8-bit-calculations means assume that if the input has 8 bit |
| * (or less) samples and the output has 16 bit samples the calculations |
| * will be done with 8 bit precision, not 16. |
| * |
| * TODO: fix this in libpng; png_set_expand_16 should cause 16 bit |
| * calculations to be used throughout. |
| */ |
| if (in_ct == PNG_COLOR_TYPE_PALETTE || in_bd < 16) |
| in_sample_depth = 8; |
| else |
| in_sample_depth = in_bd; |
| |
| if (sample_depth != 16 || in_sample_depth > 8 || |
| !dp->pm->calculations_use_input_precision) |
| digitization_error = .5; |
| |
| /* Else errors are at 8 bit precision, scale .5 in 8 bits to the 16 bits: |
| */ |
| else |
| digitization_error = .5 * 257; |
| } |
| |
| for (y=0; y<h; ++y) |
| { |
| png_const_bytep PNG_CONST pRow = store_image_row(ps, pp, 0, y); |
| png_uint_32 x; |
| |
| /* The original, standard, row pre-transforms. */ |
| png_byte std[STANDARD_ROWMAX]; |
| |
| transform_row(pp, std, in_ct, in_bd, y); |
| |
| /* Go through each original pixel transforming it and comparing with what |
| * libpng did to the same pixel. |
| */ |
| for (x=0; x<w; ++x) |
| { |
| image_pixel in_pixel, out_pixel; |
| unsigned int r, g, b, a; |
| |
| /* Find out what we think the pixel should be: */ |
| image_pixel_init(&in_pixel, std, in_ct, in_bd, x, dp->this.palette); |
| |
| in_pixel.red_sBIT = red_sBIT; |
| in_pixel.green_sBIT = green_sBIT; |
| in_pixel.blue_sBIT = blue_sBIT; |
| in_pixel.alpha_sBIT = alpha_sBIT; |
| in_pixel.have_tRNS = have_tRNS; |
| |
| /* For error detection, below. */ |
| r = in_pixel.red; |
| g = in_pixel.green; |
| b = in_pixel.blue; |
| a = in_pixel.alpha; |
| |
| dp->transform_list->mod(dp->transform_list, &in_pixel, pp, dp); |
| |
| /* Read the output pixel and compare it to what we got, we don't |
| * use the error field here, so no need to update sBIT. |
| */ |
| image_pixel_init(&out_pixel, pRow, out_ct, out_bd, x, out_palette); |
| |
| /* We don't expect changes to the index here even if the bit depth is |
| * changed. |
| */ |
| if (in_ct == PNG_COLOR_TYPE_PALETTE && |
| out_ct == PNG_COLOR_TYPE_PALETTE) |
| { |
| if (in_pixel.palette_index != out_pixel.palette_index) |
| png_error(pp, "unexpected transformed palette index"); |
| } |
| |
| /* Check the colours for palette images too - in fact the palette could |
| * be separately verified itself in most cases. |
| */ |
| if (in_pixel.red != out_pixel.red) |
| transform_range_check(pp, r, g, b, a, in_pixel.red, in_pixel.redf, |
| out_pixel.red, sample_depth, in_pixel.rede, |
| dp->pm->limit + 1./(2*((1U<<in_pixel.red_sBIT)-1)), "red/gray", |
| digitization_error); |
| |
| if ((out_ct & PNG_COLOR_MASK_COLOR) != 0 && |
| in_pixel.green != out_pixel.green) |
| transform_range_check(pp, r, g, b, a, in_pixel.green, |
| in_pixel.greenf, out_pixel.green, sample_depth, in_pixel.greene, |
| dp->pm->limit + 1./(2*((1U<<in_pixel.green_sBIT)-1)), "green", |
| digitization_error); |
| |
| if ((out_ct & PNG_COLOR_MASK_COLOR) != 0 && |
| in_pixel.blue != out_pixel.blue) |
| transform_range_check(pp, r, g, b, a, in_pixel.blue, in_pixel.bluef, |
| out_pixel.blue, sample_depth, in_pixel.bluee, |
| dp->pm->limit + 1./(2*((1U<<in_pixel.blue_sBIT)-1)), "blue", |
| digitization_error); |
| |
| if ((out_ct & PNG_COLOR_MASK_ALPHA) != 0 && |
| in_pixel.alpha != out_pixel.alpha) |
| transform_range_check(pp, r, g, b, a, in_pixel.alpha, |
| in_pixel.alphaf, out_pixel.alpha, sample_depth, in_pixel.alphae, |
| dp->pm->limit + 1./(2*((1U<<in_pixel.alpha_sBIT)-1)), "alpha", |
| digitization_error); |
| } /* pixel (x) loop */ |
| } /* row (y) loop */ |
| |
| /* Record that something was actually checked to avoid a false positive. */ |
| dp->this.ps->validated = 1; |
| } |
| |
| static void |
| transform_end(png_structp ppIn, png_infop pi) |
| { |
| png_const_structp pp = ppIn; |
| transform_display *dp = voidcast(transform_display*, |
| png_get_progressive_ptr(pp)); |
| |
| if (!dp->this.speed) |
| transform_image_validate(dp, pp, pi); |
| else |
| dp->this.ps->validated = 1; |
| } |
| |
| /* A single test run. */ |
| static void |
| transform_test(png_modifier *pmIn, PNG_CONST png_uint_32 idIn, |
| PNG_CONST image_transform* transform_listIn, PNG_CONST char * volatile name) |
| { |
| transform_display d; |
| context(&pmIn->this, fault); |
| |
| transform_display_init(&d, pmIn, idIn, transform_listIn); |
| |
| Try |
| { |
| size_t pos = 0; |
| png_structp pp; |
| png_infop pi; |
| char full_name[256]; |
| |
| /* Make sure the encoding fields are correct and enter the required |
| * modifications. |
| */ |
| transform_set_encoding(&d); |
| |
| /* Add any modifications required by the transform list. */ |
| d.transform_list->ini(d.transform_list, &d); |
| |
| /* Add the color space information, if any, to the name. */ |
| pos = safecat(full_name, sizeof full_name, pos, name); |
| pos = safecat_current_encoding(full_name, sizeof full_name, pos, d.pm); |
| |
| /* Get a png_struct for reading the image. */ |
| pp = set_modifier_for_read(d.pm, &pi, d.this.id, full_name); |
| standard_palette_init(&d.this); |
| |
| # if 0 |
| /* Logging (debugging only) */ |
| { |
| char buffer[256]; |
| |
| (void)store_message(&d.pm->this, pp, buffer, sizeof buffer, 0, |
| "running test"); |
| |
| fprintf(stderr, "%s\n", buffer); |
| } |
| # endif |
| |
| /* Introduce the correct read function. */ |
| if (d.pm->this.progressive) |
| { |
| /* Share the row function with the standard implementation. */ |
| png_set_progressive_read_fn(pp, &d, transform_info, progressive_row, |
| transform_end); |
| |
| /* Now feed data into the reader until we reach the end: */ |
| modifier_progressive_read(d.pm, pp, pi); |
| } |
| else |
| { |
| /* modifier_read expects a png_modifier* */ |
| png_set_read_fn(pp, d.pm, modifier_read); |
| |
| /* Check the header values: */ |
| png_read_info(pp, pi); |
| |
| /* Process the 'info' requirements. Only one image is generated */ |
| transform_info_imp(&d, pp, pi); |
| |
| sequential_row(&d.this, pp, pi, -1, 0); |
| |
| if (!d.this.speed) |
| transform_image_validate(&d, pp, pi); |
| else |
| d.this.ps->validated = 1; |
| } |
| |
| modifier_reset(d.pm); |
| } |
| |
| Catch(fault) |
| { |
| modifier_reset((png_modifier*)fault); |
| } |
| } |
| |
| /* The transforms: */ |
| #define ITSTRUCT(name) image_transform_##name |
| #define ITDATA(name) image_transform_data_##name |
| #define image_transform_ini image_transform_default_ini |
| #define IT(name)\ |
| static image_transform ITSTRUCT(name) =\ |
| {\ |
| #name,\ |
| 1, /*enable*/\ |
| &PT, /*list*/\ |
| 0, /*global_use*/\ |
| 0, /*local_use*/\ |
| 0, /*next*/\ |
| image_transform_ini,\ |
| image_transform_png_set_##name##_set,\ |
| image_transform_png_set_##name##_mod,\ |
| image_transform_png_set_##name##_add\ |
| } |
| #define PT ITSTRUCT(end) /* stores the previous transform */ |
| |
| /* To save code: */ |
| static void |
| image_transform_default_ini(PNG_CONST image_transform *this, |
| transform_display *that) |
| { |
| this->next->ini(this->next, that); |
| } |
| |
| static int |
| image_transform_default_add(image_transform *this, |
| PNG_CONST image_transform **that, png_byte colour_type, png_byte bit_depth) |
| { |
| UNUSED(colour_type) |
| UNUSED(bit_depth) |
| |
| this->next = *that; |
| *that = this; |
| |
| return 1; |
| } |
| |
| #ifdef PNG_READ_EXPAND_SUPPORTED |
| /* png_set_palette_to_rgb */ |
| static void |
| image_transform_png_set_palette_to_rgb_set(PNG_CONST image_transform *this, |
| transform_display *that, png_structp pp, png_infop pi) |
| { |
| png_set_palette_to_rgb(pp); |
| this->next->set(this->next, that, pp, pi); |
| } |
| |
| static void |
| image_transform_png_set_palette_to_rgb_mod(PNG_CONST image_transform *this, |
| image_pixel *that, png_const_structp pp, |
| PNG_CONST transform_display *display) |
| { |
| if (that->colour_type == PNG_COLOR_TYPE_PALETTE) |
| image_pixel_convert_PLTE(that); |
| |
| this->next->mod(this->next, that, pp, display); |
| } |
| |
| static int |
| image_transform_png_set_palette_to_rgb_add(image_transform *this, |
| PNG_CONST image_transform **that, png_byte colour_type, png_byte bit_depth) |
| { |
| UNUSED(bit_depth) |
| |
| this->next = *that; |
| *that = this; |
| |
| return colour_type == PNG_COLOR_TYPE_PALETTE; |
| } |
| |
| IT(palette_to_rgb); |
| #undef PT |
| #define PT ITSTRUCT(palette_to_rgb) |
| #endif /* PNG_READ_EXPAND_SUPPORTED */ |
| |
| #ifdef PNG_READ_EXPAND_SUPPORTED |
| /* png_set_tRNS_to_alpha */ |
| static void |
| image_transform_png_set_tRNS_to_alpha_set(PNG_CONST image_transform *this, |
| transform_display *that, png_structp pp, png_infop pi) |
| { |
| png_set_tRNS_to_alpha(pp); |
| this->next->set(this->next, that, pp, pi); |
| } |
| |
| static void |
| image_transform_png_set_tRNS_to_alpha_mod(PNG_CONST image_transform *this, |
| image_pixel *that, png_const_structp pp, |
| PNG_CONST transform_display *display) |
| { |
| /* LIBPNG BUG: this always forces palette images to RGB. */ |
| if (that->colour_type == PNG_COLOR_TYPE_PALETTE) |
| image_pixel_convert_PLTE(that); |
| |
| /* This effectively does an 'expand' only if there is some transparency to |
| * convert to an alpha channel. |
| */ |
| if (that->have_tRNS) |
| image_pixel_add_alpha(that, &display->this); |
| |
| /* LIBPNG BUG: otherwise libpng still expands to 8 bits! */ |
| else |
| { |
| if (that->bit_depth < 8) |
| that->bit_depth =8; |
| if (that->sample_depth < 8) |
| that->sample_depth = 8; |
| } |
| |
| this->next->mod(this->next, that, pp, display); |
| } |
| |
| static int |
| image_transform_png_set_tRNS_to_alpha_add(image_transform *this, |
| PNG_CONST image_transform **that, png_byte colour_type, png_byte bit_depth) |
| { |
| UNUSED(bit_depth) |
| |
| this->next = *that; |
| *that = this; |
| |
| /* We don't know yet whether there will be a tRNS chunk, but we know that |
| * this transformation should do nothing if there already is an alpha |
| * channel. |
| */ |
| return (colour_type & PNG_COLOR_MASK_ALPHA) == 0; |
| } |
| |
| IT(tRNS_to_alpha); |
| #undef PT |
| #define PT ITSTRUCT(tRNS_to_alpha) |
| #endif /* PNG_READ_EXPAND_SUPPORTED */ |
| |
| #ifdef PNG_READ_GRAY_TO_RGB_SUPPORTED |
| /* png_set_gray_to_rgb */ |
| static void |
| image_transform_png_set_gray_to_rgb_set(PNG_CONST image_transform *this, |
| transform_display *that, png_structp pp, png_infop pi) |
| { |
| png_set_gray_to_rgb(pp); |
| this->next->set(this->next, that, pp, pi); |
| } |
| |
| static void |
| image_transform_png_set_gray_to_rgb_mod(PNG_CONST image_transform *this, |
| image_pixel *that, png_const_structp pp, |
| PNG_CONST transform_display *display) |
| { |
| /* NOTE: we can actually pend the tRNS processing at this point because we |
| * can correctly recognize the original pixel value even though we have |
| * mapped the one gray channel to the three RGB ones, but in fact libpng |
| * doesn't do this, so we don't either. |
| */ |
| if ((that->colour_type & PNG_COLOR_MASK_COLOR) == 0 && that->have_tRNS) |
| image_pixel_add_alpha(that, &display->this); |
| |
| /* Simply expand the bit depth and alter the colour type as required. */ |
| if (that->colour_type == PNG_COLOR_TYPE_GRAY) |
| { |
| /* RGB images have a bit depth at least equal to '8' */ |
| if (that->bit_depth < 8) |
| that->sample_depth = that->bit_depth = 8; |
| |
| /* And just changing the colour type works here because the green and blue |
| * channels are being maintained in lock-step with the red/gray: |
| */ |
| that->colour_type = PNG_COLOR_TYPE_RGB; |
| } |
| |
| else if (that->colour_type == PNG_COLOR_TYPE_GRAY_ALPHA) |
| that->colour_type = PNG_COLOR_TYPE_RGB_ALPHA; |
| |
| this->next->mod(this->next, that, pp, display); |
| } |
| |
| static int |
| image_transform_png_set_gray_to_rgb_add(image_transform *this, |
| PNG_CONST image_transform **that, png_byte colour_type, png_byte bit_depth) |
| { |
| UNUSED(bit_depth) |
| |
| this->next = *that; |
| *that = this; |
| |
| return (colour_type & PNG_COLOR_MASK_COLOR) == 0; |
| } |
| |
| IT(gray_to_rgb); |
| #undef PT |
| #define PT ITSTRUCT(gray_to_rgb) |
| #endif /* PNG_READ_GRAY_TO_RGB_SUPPORTED */ |
| |
| #ifdef PNG_READ_EXPAND_SUPPORTED |
| /* png_set_expand */ |
| static void |
| image_transform_png_set_expand_set(PNG_CONST image_transform *this, |
| transform_display *that, png_structp pp, png_infop pi) |
| { |
| png_set_expand(pp); |
| this->next->set(this->next, that, pp, pi); |
| } |
| |
| static void |
| image_transform_png_set_expand_mod(PNG_CONST image_transform *this, |
| image_pixel *that, png_const_structp pp, |
| PNG_CONST transform_display *display) |
| { |
| /* The general expand case depends on what the colour type is: */ |
| if (that->colour_type == PNG_COLOR_TYPE_PALETTE) |
| image_pixel_convert_PLTE(that); |
| else if (that->bit_depth < 8) /* grayscale */ |
| that->sample_depth = that->bit_depth = 8; |
| |
| if (that->have_tRNS) |
| image_pixel_add_alpha(that, &display->this); |
| |
| this->next->mod(this->next, that, pp, display); |
| } |
| |
| static int |
| image_transform_png_set_expand_add(image_transform *this, |
| PNG_CONST image_transform **that, png_byte colour_type, png_byte bit_depth) |
| { |
| UNUSED(bit_depth) |
| |
| this->next = *that; |
| *that = this; |
| |
| /* 'expand' should do nothing for RGBA or GA input - no tRNS and the bit |
| * depth is at least 8 already. |
| */ |
| return (colour_type & PNG_COLOR_MASK_ALPHA) == 0; |
| } |
| |
| IT(expand); |
| #undef PT |
| #define PT ITSTRUCT(expand) |
| #endif /* PNG_READ_EXPAND_SUPPORTED */ |
| |
| #ifdef PNG_READ_EXPAND_SUPPORTED |
| /* png_set_expand_gray_1_2_4_to_8 |
| * LIBPNG BUG: this just does an 'expand' |
| */ |
| static void |
| image_transform_png_set_expand_gray_1_2_4_to_8_set( |
| PNG_CONST image_transform *this, transform_display *that, png_structp pp, |
| png_infop pi) |
| { |
| png_set_expand_gray_1_2_4_to_8(pp); |
| this->next->set(this->next, that, pp, pi); |
| } |
| |
| static void |
| image_transform_png_set_expand_gray_1_2_4_to_8_mod( |
| PNG_CONST image_transform *this, image_pixel *that, png_const_structp pp, |
| PNG_CONST transform_display *display) |
| { |
| image_transform_png_set_expand_mod(this, that, pp, display); |
| } |
| |
| static int |
| image_transform_png_set_expand_gray_1_2_4_to_8_add(image_transform *this, |
| PNG_CONST image_transform **that, png_byte colour_type, png_byte bit_depth) |
| { |
| return image_transform_png_set_expand_add(this, that, colour_type, |
| bit_depth); |
| } |
| |
| IT(expand_gray_1_2_4_to_8); |
| #undef PT |
| #define PT ITSTRUCT(expand_gray_1_2_4_to_8) |
| #endif /* PNG_READ_EXPAND_SUPPORTED */ |
| |
| #ifdef PNG_READ_EXPAND_16_SUPPORTED |
| /* png_set_expand_16 */ |
| static void |
| image_transform_png_set_expand_16_set(PNG_CONST image_transform *this, |
| transform_display *that, png_structp pp, png_infop pi) |
| { |
| png_set_expand_16(pp); |
| this->next->set(this->next, that, pp, pi); |
| } |
| |
| static void |
| image_transform_png_set_expand_16_mod(PNG_CONST image_transform *this, |
| image_pixel *that, png_const_structp pp, |
| PNG_CONST transform_display *display) |
| { |
| /* Expect expand_16 to expand everything to 16 bits as a result of also |
| * causing 'expand' to happen. |
| */ |
| if (that->colour_type == PNG_COLOR_TYPE_PALETTE) |
| image_pixel_convert_PLTE(that); |
| |
| if (that->have_tRNS) |
| image_pixel_add_alpha(that, &display->this); |
| |
| if (that->bit_depth < 16) |
| that->sample_depth = that->bit_depth = 16; |
| |
| this->next->mod(this->next, that, pp, display); |
| } |
| |
| static int |
| image_transform_png_set_expand_16_add(image_transform *this, |
| PNG_CONST image_transform **that, png_byte colour_type, png_byte bit_depth) |
| { |
| UNUSED(colour_type) |
| |
| this->next = *that; |
| *that = this; |
| |
| /* expand_16 does something unless the bit depth is already 16. */ |
| return bit_depth < 16; |
| } |
| |
| IT(expand_16); |
| #undef PT |
| #define PT ITSTRUCT(expand_16) |
| #endif /* PNG_READ_EXPAND_16_SUPPORTED */ |
| |
| #ifdef PNG_READ_SCALE_16_TO_8_SUPPORTED /* API added in 1.5.4 */ |
| /* png_set_scale_16 */ |
| static void |
| image_transform_png_set_scale_16_set(PNG_CONST image_transform *this, |
| transform_display *that, png_structp pp, png_infop pi) |
| { |
| png_set_scale_16(pp); |
| this->next->set(this->next, that, pp, pi); |
| } |
| |
| static void |
| image_transform_png_set_scale_16_mod(PNG_CONST image_transform *this, |
| image_pixel *that, png_const_structp pp, |
| PNG_CONST transform_display *display) |
| { |
| if (that->bit_depth == 16) |
| { |
| that->sample_depth = that->bit_depth = 8; |
| if (that->red_sBIT > 8) that->red_sBIT = 8; |
| if (that->green_sBIT > 8) that->green_sBIT = 8; |
| if (that->blue_sBIT > 8) that->blue_sBIT = 8; |
| if (that->alpha_sBIT > 8) that->alpha_sBIT = 8; |
| } |
| |
| this->next->mod(this->next, that, pp, display); |
| } |
| |
| static int |
| image_transform_png_set_scale_16_add(image_transform *this, |
| PNG_CONST image_transform **that, png_byte colour_type, png_byte bit_depth) |
| { |
| UNUSED(colour_type) |
| |
| this->next = *that; |
| *that = this; |
| |
| return bit_depth > 8; |
| } |
| |
| IT(scale_16); |
| #undef PT |
| #define PT ITSTRUCT(scale_16) |
| #endif /* PNG_READ_SCALE_16_TO_8_SUPPORTED (1.5.4 on) */ |
| |
| #ifdef PNG_READ_16_TO_8_SUPPORTED /* the default before 1.5.4 */ |
| /* png_set_strip_16 */ |
| static void |
| image_transform_png_set_strip_16_set(PNG_CONST image_transform *this, |
| transform_display *that, png_structp pp, png_infop pi) |
| { |
| png_set_strip_16(pp); |
| this->next->set(this->next, that, pp, pi); |
| } |
| |
| static void |
| image_transform_png_set_strip_16_mod(PNG_CONST image_transform *this, |
| image_pixel *that, png_const_structp pp, |
| PNG_CONST transform_display *display) |
| { |
| if (that->bit_depth == 16) |
| { |
| that->sample_depth = that->bit_depth = 8; |
| if (that->red_sBIT > 8) that->red_sBIT = 8; |
| if (that->green_sBIT > 8) that->green_sBIT = 8; |
| if (that->blue_sBIT > 8) that->blue_sBIT = 8; |
| if (that->alpha_sBIT > 8) that->alpha_sBIT = 8; |
| |
| /* Prior to 1.5.4 png_set_strip_16 would use an 'accurate' method if this |
| * configuration option is set. From 1.5.4 the flag is never set and the |
| * 'scale' API (above) must be used. |
| */ |
| # ifdef PNG_READ_ACCURATE_SCALE_SUPPORTED |
| # if PNG_LIBPNG_VER >= 10504 |
| # error PNG_READ_ACCURATE_SCALE should not be set |
| # endif |
| |
| /* The strip 16 algorithm drops the low 8 bits rather than calculating |
| * 1/257, so we need to adjust the permitted errors appropriately: |
| * Notice that this is only relevant prior to the addition of the |
| * png_set_scale_16 API in 1.5.4 (but 1.5.4+ always defines the above!) |
| */ |
| { |
| PNG_CONST double d = (255-128.5)/65535; |
| that->rede += d; |
| that->greene += d; |
| that->bluee += d; |
| that->alphae += d; |
| } |
| # endif |
| } |
| |
| this->next->mod(this->next, that, pp, display); |
| } |
| |
| static int |
| image_transform_png_set_strip_16_add(image_transform *this, |
| PNG_CONST image_transform **that, png_byte colour_type, png_byte bit_depth) |
| { |
| UNUSED(colour_type) |
| |
| this->next = *that; |
| *that = this; |
| |
| return bit_depth > 8; |
| } |
| |
| IT(strip_16); |
| #undef PT |
| #define PT ITSTRUCT(strip_16) |
| #endif /* PNG_READ_16_TO_8_SUPPORTED */ |
| |
| #ifdef PNG_READ_STRIP_ALPHA_SUPPORTED |
| /* png_set_strip_alpha */ |
| static void |
| image_transform_png_set_strip_alpha_set(PNG_CONST image_transform *this, |
| transform_display *that, png_structp pp, png_infop pi) |
| { |
| png_set_strip_alpha(pp); |
| this->next->set(this->next, that, pp, pi); |
| } |
| |
| static void |
| image_transform_png_set_strip_alpha_mod(PNG_CONST image_transform *this, |
| image_pixel *that, png_const_structp pp, |
| PNG_CONST transform_display *display) |
| { |
| if (that->colour_type == PNG_COLOR_TYPE_GRAY_ALPHA) |
| that->colour_type = PNG_COLOR_TYPE_GRAY; |
| else if (that->colour_type == PNG_COLOR_TYPE_RGB_ALPHA) |
| that->colour_type = PNG_COLOR_TYPE_RGB; |
| |
| that->have_tRNS = 0; |
| that->alphaf = 1; |
| |
| this->next->mod(this->next, that, pp, display); |
| } |
| |
| static int |
| image_transform_png_set_strip_alpha_add(image_transform *this, |
| PNG_CONST image_transform **that, png_byte colour_type, png_byte bit_depth) |
| { |
| UNUSED(bit_depth) |
| |
| this->next = *that; |
| *that = this; |
| |
| return (colour_type & PNG_COLOR_MASK_ALPHA) != 0; |
| } |
| |
| IT(strip_alpha); |
| #undef PT |
| #define PT ITSTRUCT(strip_alpha) |
| #endif /* PNG_READ_STRIP_ALPHA_SUPPORTED */ |
| |
| #ifdef PNG_READ_RGB_TO_GRAY_SUPPORTED |
| /* png_set_rgb_to_gray(png_structp, int err_action, double red, double green) |
| * png_set_rgb_to_gray_fixed(png_structp, int err_action, png_fixed_point red, |
| * png_fixed_point green) |
| * png_get_rgb_to_gray_status |
| * |
| * The 'default' test here uses values known to be used inside libpng: |
| * |
| * red: 6968 |
| * green: 23434 |
| * blue: 2366 |
| * |
| * These values are being retained for compatibility, along with the somewhat |
| * broken truncation calculation in the fast-and-inaccurate code path. Older |
| * versions of libpng will fail the accuracy tests below because they use the |
| * truncation algorithm everywhere. |
| */ |
| #define data ITDATA(rgb_to_gray) |
| static struct |
| { |
| double gamma; /* File gamma to use in processing */ |
| |
| /* The following are the parameters for png_set_rgb_to_gray: */ |
| # ifdef PNG_FLOATING_POINT_SUPPORTED |
| double red_to_set; |
| double green_to_set; |
| # else |
| png_fixed_point red_to_set; |
| png_fixed_point green_to_set; |
| # endif |
| |
| /* The actual coefficients: */ |
| double red_coefficient; |
| double green_coefficient; |
| double blue_coefficient; |
| |
| /* Set if the coeefficients have been overridden. */ |
| int coefficients_overridden; |
| } data; |
| |
| #undef image_transform_ini |
| #define image_transform_ini image_transform_png_set_rgb_to_gray_ini |
| static void |
| image_transform_png_set_rgb_to_gray_ini(PNG_CONST image_transform *this, |
| transform_display *that) |
| { |
| png_modifier *pm = that->pm; |
| PNG_CONST color_encoding *e = pm->current_encoding; |
| |
| UNUSED(this) |
| |
| /* Since we check the encoding this flag must be set: */ |
| pm->test_uses_encoding = 1; |
| |
| /* If 'e' is not NULL chromaticity information is present and either a cHRM |
| * or an sRGB chunk will be inserted. |
| */ |
| if (e != 0) |
| { |
| /* Coefficients come from the encoding, but may need to be normalized to a |
| * white point Y of 1.0 |
| */ |
| PNG_CONST double whiteY = e->red.Y + e->green.Y + e->blue.Y; |
| |
| data.red_coefficient = e->red.Y; |
| data.green_coefficient = e->green.Y; |
| data.blue_coefficient = e->blue.Y; |
| |
| if (whiteY != 1) |
| { |
| data.red_coefficient /= whiteY; |
| data.green_coefficient /= whiteY; |
| data.blue_coefficient /= whiteY; |
| } |
| } |
| |
| else |
| { |
| /* The default (built in) coeffcients, as above: */ |
| data.red_coefficient = 6968 / 32768.; |
| data.green_coefficient = 23434 / 32768.; |
| data.blue_coefficient = 2366 / 32768.; |
| } |
| |
| data.gamma = pm->current_gamma; |
| |
| /* If not set then the calculations assume linear encoding (implicitly): */ |
| if (data.gamma == 0) |
| data.gamma = 1; |
| |
| /* The arguments to png_set_rgb_to_gray can override the coefficients implied |
| * by the color space encoding. If doing exhaustive checks do the override |
| * in each case, otherwise do it randomly. |
| */ |
| if (pm->test_exhaustive) |
| { |
| /* First time in coefficients_overridden is 0, the following sets it to 1, |
| * so repeat if it is set. If a test fails this may mean we subsequently |
| * skip a non-override test, ignore that. |
| */ |
| data.coefficients_overridden = !data.coefficients_overridden; |
| pm->repeat = data.coefficients_overridden != 0; |
| } |
| |
| else |
| data.coefficients_overridden = random_choice(); |
| |
| if (data.coefficients_overridden) |
| { |
| /* These values override the color encoding defaults, simply use random |
| * numbers. |
| */ |
| png_uint_32 ru; |
| double total; |
| |
| RANDOMIZE(ru); |
| data.green_coefficient = total = (ru & 0xffff) / 65535.; |
| ru >>= 16; |
| data.red_coefficient = (1 - total) * (ru & 0xffff) / 65535.; |
| total += data.red_coefficient; |
| data.blue_coefficient = 1 - total; |
| |
| # ifdef PNG_FLOATING_POINT_SUPPORTED |
| data.red_to_set = data.red_coefficient; |
| data.green_to_set = data.green_coefficient; |
| # else |
| data.red_to_set = fix(data.red_coefficient); |
| data.green_to_set = fix(data.green_coefficient); |
| # endif |
| |
| /* The following just changes the error messages: */ |
| pm->encoding_ignored = 1; |
| } |
| |
| else |
| { |
| data.red_to_set = -1; |
| data.green_to_set = -1; |
| } |
| |
| /* Adjust the error limit in the png_modifier because of the larger errors |
| * produced in the digitization during the gamma handling. |
| */ |
| if (data.gamma != 1) /* Use gamma tables */ |
| { |
| if (that->this.bit_depth == 16 || pm->assume_16_bit_calculations) |
| { |
| /* The 16 bit case ends up producing a maximum error of about |
| * +/-5 in 65535, allow for +/-8 with the given gamma. |
| */ |
| that->pm->limit += pow(8./65535, data.gamma); |
| } |
| |
| else |
| { |
| /* Rounding to 8 bits in the linear space causes massive errors which |
| * will trigger the error check in transform_range_check. Fix that |
| * here by taking the gamma encoding into account. |
| */ |
| that->pm->limit += pow(1./255, data.gamma); |
| } |
| } |
| |
| else |
| { |
| /* With no gamma correction a large error comes from the truncation of the |
| * calculation in the 8 bit case, allow for that here. |
| */ |
| if (that->this.bit_depth != 16) |
| that->pm->limit += 4E-3; |
| } |
| } |
| |
| static void |
| image_transform_png_set_rgb_to_gray_set(PNG_CONST image_transform *this, |
| transform_display *that, png_structp pp, png_infop pi) |
| { |
| PNG_CONST int error_action = 1; /* no error, no defines in png.h */ |
| |
| # ifdef PNG_FLOATING_POINT_SUPPORTED |
| png_set_rgb_to_gray(pp, error_action, data.red_to_set, data.green_to_set); |
| # else |
| png_set_rgb_to_gray_fixed(pp, error_action, data.red_to_set, |
| data.green_to_set); |
| # endif |
| |
| # ifdef PNG_READ_cHRM_SUPPORTED |
| if (that->pm->current_encoding != 0) |
| { |
| /* We have an encoding so a cHRM chunk may have been set; if so then |
| * check that the libpng APIs give the correct (X,Y,Z) values within |
| * some margin of error for the round trip through the chromaticity |
| * form. |
| */ |
| # ifdef PNG_FLOATING_POINT_SUPPORTED |
| # define API_function png_get_cHRM_XYZ |
| # define API_form "FP" |
| # define API_type double |
| # define API_cvt(x) (x) |
| # else |
| # define API_function png_get_cHRM_XYZ_fixed |
| # define API_form "fixed" |
| # define API_type png_fixed_point |
| # define API_cvt(x) ((double)(x)/PNG_FP_1) |
| # endif |
| |
| API_type rX, gX, bX; |
| API_type rY, gY, bY; |
| API_type rZ, gZ, bZ; |
| |
| if ((API_function(pp, pi, &rX, &rY, &rZ, &gX, &gY, &gZ, &bX, &bY, &bZ) |
| & PNG_INFO_cHRM) != 0) |
| { |
| double maxe; |
| PNG_CONST char *el; |
| color_encoding e, o; |
| |
| /* Expect libpng to return a normalized result, but the original |
| * color space encoding may not be normalized. |
| */ |
| modifier_current_encoding(that->pm, &o); |
| normalize_color_encoding(&o); |
| |
| /* Sanity check the pngvalid code - the coefficients should match |
| * the normalized Y values of the encoding unless they were |
| * overridden. |
| */ |
| if (data.red_to_set == -1 && data.green_to_set == -1 && |
| (fabs(o.red.Y - data.red_coefficient) > DBL_EPSILON || |
| fabs(o.green.Y - data.green_coefficient) > DBL_EPSILON || |
| fabs(o.blue.Y - data.blue_coefficient) > DBL_EPSILON)) |
| png_error(pp, "internal pngvalid cHRM coefficient error"); |
| |
| /* Generate a colour space encoding. */ |
| e.gamma = o.gamma; /* not used */ |
| e.red.X = API_cvt(rX); |
| e.red.Y = API_cvt(rY); |
| e.red.Z = API_cvt(rZ); |
| e.green.X = API_cvt(gX); |
| e.green.Y = API_cvt(gY); |
| e.green.Z = API_cvt(gZ); |
| e.blue.X = API_cvt(bX); |
| e.blue.Y = API_cvt(bY); |
| e.blue.Z = API_cvt(bZ); |
| |
| /* This should match the original one from the png_modifier, within |
| * the range permitted by the libpng fixed point representation. |
| */ |
| maxe = 0; |
| el = "-"; /* Set to element name with error */ |
| |
| # define CHECK(col,x)\ |
| {\ |
| double err = fabs(o.col.x - e.col.x);\ |
| if (err > maxe)\ |
| {\ |
| maxe = err;\ |
| el = #col "(" #x ")";\ |
| }\ |
| } |
| |
| CHECK(red,X) |
| CHECK(red,Y) |
| CHECK(red,Z) |
| CHECK(green,X) |
| CHECK(green,Y) |
| CHECK(green,Z) |
| CHECK(blue,X) |
| CHECK(blue,Y) |
| CHECK(blue,Z) |
| |
| /* Here in both fixed and floating cases to check the values read |
| * from the cHRm chunk. PNG uses fixed point in the cHRM chunk, so |
| * we can't expect better than +/-.5E-5 on the result, allow 1E-5. |
| */ |
| if (maxe >= 1E-5) |
| { |
| size_t pos = 0; |
| char buffer[256]; |
| |
| pos = safecat(buffer, sizeof buffer, pos, API_form); |
| pos = safecat(buffer, sizeof buffer, pos, " cHRM "); |
| pos = safecat(buffer, sizeof buffer, pos, el); |
| pos = safecat(buffer, sizeof buffer, pos, " error: "); |
| pos = safecatd(buffer, sizeof buffer, pos, maxe, 7); |
| pos = safecat(buffer, sizeof buffer, pos, " "); |
| /* Print the color space without the gamma value: */ |
| pos = safecat_color_encoding(buffer, sizeof buffer, pos, &o, 0); |
| pos = safecat(buffer, sizeof buffer, pos, " -> "); |
| pos = safecat_color_encoding(buffer, sizeof buffer, pos, &e, 0); |
| |
| png_error(pp, buffer); |
| } |
| } |
| } |
| # endif /* READ_cHRM */ |
| |
| this->next->set(this->next, that, pp, pi); |
| } |
| |
| static void |
| image_transform_png_set_rgb_to_gray_mod(PNG_CONST image_transform *this, |
| image_pixel *that, png_const_structp pp, |
| PNG_CONST transform_display *display) |
| { |
| if ((that->colour_type & PNG_COLOR_MASK_COLOR) != 0) |
| { |
| double gray, err; |
| |
| if (that->colour_type == PNG_COLOR_TYPE_PALETTE) |
| image_pixel_convert_PLTE(that); |
| |
| /* Image now has RGB channels... */ |
| { |
| PNG_CONST png_modifier *pm = display->pm; |
| PNG_CONST unsigned int sample_depth = that->sample_depth; |
| int isgray; |
| double r, g, b; |
| double rlo, rhi, glo, ghi, blo, bhi, graylo, grayhi; |
| |
| /* Do this using interval arithmetic, otherwise it is too difficult to |
| * handle the errors correctly. |
| * |
| * To handle the gamma correction work out the upper and lower bounds |
| * of the digitized value. Assume rounding here - normally the values |
| * will be identical after this operation if there is only one |
| * transform, feel free to delete the png_error checks on this below in |
| * the future (this is just me trying to ensure it works!) |
| */ |
| r = rlo = rhi = that->redf; |
| rlo -= that->rede; |
| rlo = digitize(pm, rlo, sample_depth, 1/*round*/); |
| rhi += that->rede; |
| rhi = digitize(pm, rhi, sample_depth, 1/*round*/); |
| |
| g = glo = ghi = that->greenf; |
| glo -= that->greene; |
| glo = digitize(pm, glo, sample_depth, 1/*round*/); |
| ghi += that->greene; |
| ghi = digitize(pm, ghi, sample_depth, 1/*round*/); |
| |
| b = blo = bhi = that->bluef; |
| blo -= that->bluee; |
| blo = digitize(pm, blo, sample_depth, 1/*round*/); |
| bhi += that->greene; |
| bhi = digitize(pm, bhi, sample_depth, 1/*round*/); |
| |
| isgray = r==g && g==b; |
| |
| if (data.gamma != 1) |
| { |
| PNG_CONST double power = 1/data.gamma; |
| PNG_CONST double abse = abserr(pm, sample_depth, sample_depth); |
| |
| /* 'abse' is the absolute error permitted in linear calculations. It |
| * is used here to capture the error permitted in the handling |
| * (undoing) of the gamma encoding. Once again digitization occurs |
| * to handle the upper and lower bounds of the values. This is |
| * where the real errors are introduced. |
| */ |
| r = pow(r, power); |
| rlo = digitize(pm, pow(rlo, power)-abse, sample_depth, 1); |
| rhi = digitize(pm, pow(rhi, power)+abse, sample_depth, 1); |
| |
| g = pow(g, power); |
| glo = digitize(pm, pow(glo, power)-abse, sample_depth, 1); |
| ghi = digitize(pm, pow(ghi, power)+abse, sample_depth, 1); |
| |
| b = pow(b, power); |
| blo = digitize(pm, pow(blo, power)-abse, sample_depth, 1); |
| bhi = digitize(pm, pow(bhi, power)+abse, sample_depth, 1); |
| } |
| |
| /* Now calculate the actual gray values. Although the error in the |
| * coefficients depends on whether they were specified on the command |
| * line (in which case truncation to 15 bits happened) or not (rounding |
| * was used) the maxium error in an individual coefficient is always |
| * 1/32768, because even in the rounding case the requirement that |
| * coefficients add up to 32768 can cause a larger rounding error. |
| * |
| * The only time when rounding doesn't occur in 1.5.5 and later is when |
| * the non-gamma code path is used for less than 16 bit data. |
| */ |
| gray = r * data.red_coefficient + g * data.green_coefficient + |
| b * data.blue_coefficient; |
| |
| { |
| PNG_CONST int do_round = data.gamma != 1 || sample_depth == 16; |
| PNG_CONST double ce = 1. / 32768; |
| |
| graylo = digitize(pm, rlo * (data.red_coefficient-ce) + |
| glo * (data.green_coefficient-ce) + |
| blo * (data.blue_coefficient-ce), sample_depth, do_round); |
| if (graylo <= 0) |
| graylo = 0; |
| |
| grayhi = digitize(pm, rhi * (data.red_coefficient+ce) + |
| ghi * (data.green_coefficient+ce) + |
| bhi * (data.blue_coefficient+ce), sample_depth, do_round); |
| if (grayhi >= 1) |
| grayhi = 1; |
| } |
| |
| /* And invert the gamma. */ |
| if (data.gamma != 1) |
| { |
| PNG_CONST double power = data.gamma; |
| |
| gray = pow(gray, power); |
| graylo = digitize(pm, pow(graylo, power), sample_depth, 1); |
| grayhi = digitize(pm, pow(grayhi, power), sample_depth, 1); |
| } |
| |
| /* Now the error can be calculated. |
| * |
| * If r==g==b because there is no overall gamma correction libpng |
| * currently preserves the original value. |
| */ |
| if (isgray) |
| err = (that->rede + that->greene + that->bluee)/3; |
| |
| else |
| { |
| err = fabs(grayhi-gray); |
| if (fabs(gray - graylo) > err) |
| err = fabs(graylo-gray); |
| |
| /* Check that this worked: */ |
| if (err > display->pm->limit) |
| { |
| size_t pos = 0; |
| char buffer[128]; |
| |
| pos = safecat(buffer, sizeof buffer, pos, "rgb_to_gray error "); |
| pos = safecatd(buffer, sizeof buffer, pos, err, 6); |
| pos = safecat(buffer, sizeof buffer, pos, " exceeds limit "); |
| pos = safecatd(buffer, sizeof buffer, pos, |
| display->pm->limit, 6); |
| png_error(pp, buffer); |
| } |
| } |
| } |
| |
| that->bluef = that->greenf = that->redf = gray; |
| that->bluee = that->greene = that->rede = err; |
| |
| /* The sBIT is the minium of the three colour channel sBITs. */ |
| if (that->red_sBIT > that->green_sBIT) |
| that->red_sBIT = that->green_sBIT; |
| if (that->red_sBIT > that->blue_sBIT) |
| that->red_sBIT = that->blue_sBIT; |
| that->blue_sBIT = that->green_sBIT = that->red_sBIT; |
| |
| /* And remove the colour bit in the type: */ |
| if (that->colour_type == PNG_COLOR_TYPE_RGB) |
| that->colour_type = PNG_COLOR_TYPE_GRAY; |
| else if (that->colour_type == PNG_COLOR_TYPE_RGB_ALPHA) |
| that->colour_type = PNG_COLOR_TYPE_GRAY_ALPHA; |
| } |
| |
| this->next->mod(this->next, that, pp, display); |
| } |
| |
| static int |
| image_transform_png_set_rgb_to_gray_add(image_transform *this, |
| PNG_CONST image_transform **that, png_byte colour_type, png_byte bit_depth) |
| { |
| UNUSED(bit_depth) |
| |
| this->next = *that; |
| *that = this; |
| |
| return (colour_type & PNG_COLOR_MASK_COLOR) != 0; |
| } |
| |
| #undef data |
| IT(rgb_to_gray); |
| #undef PT |
| #define PT ITSTRUCT(rgb_to_gray) |
| #undef image_transform_ini |
| #define image_transform_ini image_transform_default_ini |
| #endif /* PNG_READ_RGB_TO_GRAY_SUPPORTED */ |
| |
| #ifdef PNG_READ_BACKGROUND_SUPPORTED |
| /* png_set_background(png_structp, png_const_color_16p background_color, |
| * int background_gamma_code, int need_expand, double background_gamma) |
| * png_set_background_fixed(png_structp, png_const_color_16p background_color, |
| * int background_gamma_code, int need_expand, |
| * png_fixed_point background_gamma) |
| * |
| * As with rgb_to_gray this ignores the gamma (at present.) |
| */ |
| #define data ITDATA(background) |
| static image_pixel data; |
| |
| static void |
| image_transform_png_set_background_set(PNG_CONST image_transform *this, |
| transform_display *that, png_structp pp, png_infop pi) |
| { |
| png_byte colour_type, bit_depth; |
| png_byte random_bytes[8]; /* 8 bytes - 64 bits - the biggest pixel */ |
| png_color_16 back; |
| |
| /* We need a background colour, because we don't know exactly what transforms |
| * have been set we have to supply the colour in the original file format and |
| * so we need to know what that is! The background colour is stored in the |
| * transform_display. |
| */ |
| RANDOMIZE(random_bytes); |
| |
| /* Read the random value, for colour type 3 the background colour is actually |
| * expressed as a 24bit rgb, not an index. |
| */ |
| colour_type = that->this.colour_type; |
| if (colour_type == 3) |
| { |
| colour_type = PNG_COLOR_TYPE_RGB; |
| bit_depth = 8; |
| } |
| |
| else |
| bit_depth = that->this.bit_depth; |
| |
| image_pixel_init(&data, random_bytes, colour_type, |
| bit_depth, 0/*x*/, 0/*unused: palette*/); |
| |
| /* Extract the background colour from this image_pixel, but make sure the |
| * unused fields of 'back' are garbage. |
| */ |
| RANDOMIZE(back); |
| |
| if (colour_type & PNG_COLOR_MASK_COLOR) |
| { |
| back.red = (png_uint_16)data.red; |
| back.green = (png_uint_16)data.green; |
| back.blue = (png_uint_16)data.blue; |
| } |
| |
| else |
| back.gray = (png_uint_16)data.red; |
| |
| # ifdef PNG_FLOATING_POINT_SUPPORTED |
| png_set_background(pp, &back, PNG_BACKGROUND_GAMMA_FILE, 1/*need expand*/, |
| 0); |
| # else |
| png_set_background_fixed(pp, &back, PNG_BACKGROUND_GAMMA_FILE, |
| 1/*need expand*/, 0); |
| # endif |
| |
| this->next->set(this->next, that, pp, pi); |
| } |
| |
| static void |
| image_transform_png_set_background_mod(PNG_CONST image_transform *this, |
| image_pixel *that, png_const_structp pp, |
| PNG_CONST transform_display *display) |
| { |
| /* Check for tRNS first: */ |
| if (that->have_tRNS && that->colour_type != PNG_COLOR_TYPE_PALETTE) |
| image_pixel_add_alpha(that, &display->this); |
| |
| /* This is only necessary if the alpha value is less than 1. */ |
| if (that->alphaf < 1) |
| { |
| /* Now we do the background calculation without any gamma correction. */ |
| if (that->alphaf <= 0) |
| { |
| that->redf = data.redf; |
| that->greenf = data.greenf; |
| that->bluef = data.bluef; |
| |
| that->rede = data.rede; |
| that->greene = data.greene; |
| that->bluee = data.bluee; |
| |
| that->red_sBIT= data.red_sBIT; |
| that->green_sBIT= data.green_sBIT; |
| that->blue_sBIT= data.blue_sBIT; |
| } |
| |
| else /* 0 < alpha < 1 */ |
| { |
| double alf = 1 - that->alphaf; |
| |
| that->redf = that->redf * that->alphaf + data.redf * alf; |
| that->rede = that->rede * that->alphaf + data.rede * alf + |
| DBL_EPSILON; |
| that->greenf = that->greenf * that->alphaf + data.greenf * alf; |
| that->greene = that->greene * that->alphaf + data.greene * alf + |
| DBL_EPSILON; |
| that->bluef = that->bluef * that->alphaf + data.bluef * alf; |
| that->bluee = that->bluee * that->alphaf + data.bluee * alf + |
| DBL_EPSILON; |
| } |
| |
| /* Remove the alpha type and set the alpha (not in that order.) */ |
| that->alphaf = 1; |
| that->alphae = 0; |
| |
| if (that->colour_type == PNG_COLOR_TYPE_RGB_ALPHA) |
| that->colour_type = PNG_COLOR_TYPE_RGB; |
| else if (that->colour_type == PNG_COLOR_TYPE_GRAY_ALPHA) |
| that->colour_type = PNG_COLOR_TYPE_GRAY; |
| /* PNG_COLOR_TYPE_PALETTE is not changed */ |
| } |
| |
| this->next->mod(this->next, that, pp, display); |
| } |
| |
| #define image_transform_png_set_background_add image_transform_default_add |
| |
| #undef data |
| IT(background); |
| #undef PT |
| #define PT ITSTRUCT(background) |
| #endif /* PNG_READ_BACKGROUND_SUPPORTED */ |
| |
| /* This may just be 'end' if all the transforms are disabled! */ |
| static image_transform *PNG_CONST image_transform_first = &PT; |
| |
| static void |
| transform_enable(PNG_CONST char *name) |
| { |
| /* Everything starts out enabled, so if we see an 'enable' disabled |
| * everything else the first time round. |
| */ |
| static int all_disabled = 0; |
| int found_it = 0; |
| image_transform *list = image_transform_first; |
| |
| while (list != &image_transform_end) |
| { |
| if (strcmp(list->name, name) == 0) |
| { |
| list->enable = 1; |
| found_it = 1; |
| } |
| else if (!all_disabled) |
| list->enable = 0; |
| |
| list = list->list; |
| } |
| |
| all_disabled = 1; |
| |
| if (!found_it) |
| { |
| fprintf(stderr, "pngvalid: --transform-enable=%s: unknown transform\n", |
| name); |
| exit(1); |
| } |
| } |
| |
| static void |
| transform_disable(PNG_CONST char *name) |
| { |
| image_transform *list = image_transform_first; |
| |
| while (list != &image_transform_end) |
| { |
| if (strcmp(list->name, name) == 0) |
| { |
| list->enable = 0; |
| return; |
| } |
| |
| list = list->list; |
| } |
| |
| fprintf(stderr, "pngvalid: --transform-disable=%s: unknown transform\n", |
| name); |
| exit(1); |
| } |
| |
| static void |
| image_transform_reset_count(void) |
| { |
| image_transform *next = image_transform_first; |
| int count = 0; |
| |
| while (next != &image_transform_end) |
| { |
| next->local_use = 0; |
| next->next = 0; |
| next = next->list; |
| ++count; |
| } |
| |
| /* This can only happen if we every have more than 32 transforms (excluding |
| * the end) in the list. |
| */ |
| if (count > 32) abort(); |
| } |
| |
| static int |
| image_transform_test_counter(png_uint_32 counter, unsigned int max) |
| { |
| /* Test the list to see if there is any point contining, given a current |
| * counter and a 'max' value. |
| */ |
| image_transform *next = image_transform_first; |
| |
| while (next != &image_transform_end) |
| { |
| /* For max 0 or 1 continue until the counter overflows: */ |
| counter >>= 1; |
| |
| /* Continue if any entry hasn't reacked the max. */ |
| if (max > 1 && next->local_use < max) |
| return 1; |
| next = next->list; |
| } |
| |
| return max <= 1 && counter == 0; |
| } |
| |
| static png_uint_32 |
| image_transform_add(PNG_CONST image_transform **this, unsigned int max, |
| png_uint_32 counter, char *name, size_t sizeof_name, size_t *pos, |
| png_byte colour_type, png_byte bit_depth) |
| { |
| for (;;) /* until we manage to add something */ |
| { |
| png_uint_32 mask; |
| image_transform *list; |
| |
| /* Find the next counter value, if the counter is zero this is the start |
| * of the list. This routine always returns the current counter (not the |
| * next) so it returns 0 at the end and expects 0 at the beginning. |
| */ |
| if (counter == 0) /* first time */ |
| { |
| image_transform_reset_count(); |
| if (max <= 1) |
| counter = 1; |
| else |
| counter = random_32(); |
| } |
| else /* advance the counter */ |
| { |
| switch (max) |
| { |
| case 0: ++counter; break; |
| case 1: counter <<= 1; break; |
| default: counter = random_32(); break; |
| } |
| } |
| |
| /* Now add all these items, if possible */ |
| *this = &image_transform_end; |
| list = image_transform_first; |
| mask = 1; |
| |
| /* Go through the whole list adding anything that the counter selects: */ |
| while (list != &image_transform_end) |
| { |
| if ((counter & mask) != 0 && list->enable && |
| (max == 0 || list->local_use < max)) |
| { |
| /* Candidate to add: */ |
| if (list->add(list, this, colour_type, bit_depth) || max == 0) |
| { |
| /* Added, so add to the name too. */ |
| *pos = safecat(name, sizeof_name, *pos, " +"); |
| *pos = safecat(name, sizeof_name, *pos, list->name); |
| } |
| |
| else |
| { |
| /* Not useful and max>0, so remove it from *this: */ |
| *this = list->next; |
| list->next = 0; |
| |
| /* And, since we know it isn't useful, stop it being added again |
| * in this run: |
| */ |
| list->local_use = max; |
| } |
| } |
| |
| mask <<= 1; |
| list = list->list; |
| } |
| |
| /* Now if anything was added we have something to do. */ |
| if (*this != &image_transform_end) |
| return counter; |
| |
| /* Nothing added, but was there anything in there to add? */ |
| if (!image_transform_test_counter(counter, max)) |
| return 0; |
| } |
| } |
| |
| #ifdef THIS_IS_THE_PROFORMA |
| static void |
| image_transform_png_set_@_set(PNG_CONST image_transform *this, |
| transform_display *that, png_structp pp, png_infop pi) |
| { |
| png_set_@(pp); |
| this->next->set(this->next, that, pp, pi); |
| } |
| |
| static void |
| image_transform_png_set_@_mod(PNG_CONST image_transform *this, |
| image_pixel *that, png_const_structp pp, |
| PNG_CONST transform_display *display) |
| { |
| this->next->mod(this->next, that, pp, display); |
| } |
| |
| static int |
| image_transform_png_set_@_add(image_transform *this, |
| PNG_CONST image_transform **that, char *name, size_t sizeof_name, |
| size_t *pos, png_byte colour_type, png_byte bit_depth) |
| { |
| this->next = *that; |
| *that = this; |
| |
| *pos = safecat(name, sizeof_name, *pos, " +@"); |
| |
| return 1; |
| } |
| |
| IT(@); |
| #endif |
| |
| /* png_set_quantize(png_structp, png_colorp palette, int num_palette, |
| * int maximum_colors, png_const_uint_16p histogram, int full_quantize) |
| * |
| * Very difficult to validate this! |
| */ |
| /*NOTE: TBD NYI */ |
| |
| /* The data layout transforms are handled by swapping our own channel data, |
| * necessarily these need to happen at the end of the transform list because the |
| * semantic of the channels changes after these are executed. Some of these, |
| * like set_shift and set_packing, can't be done at present because they change |
| * the layout of the data at the sub-sample level so sample() won't get the |
| * right answer. |
| */ |
| /* png_set_invert_alpha */ |
| /*NOTE: TBD NYI */ |
| |
| /* png_set_bgr */ |
| /*NOTE: TBD NYI */ |
| |
| /* png_set_swap_alpha */ |
| /*NOTE: TBD NYI */ |
| |
| /* png_set_swap */ |
| /*NOTE: TBD NYI */ |
| |
| /* png_set_filler, (png_structp png_ptr, png_uint_32 filler, int flags)); */ |
| /*NOTE: TBD NYI */ |
| |
| /* png_set_add_alpha, (png_structp png_ptr, png_uint_32 filler, int flags)); */ |
| /*NOTE: TBD NYI */ |
| |
| /* png_set_packing */ |
| /*NOTE: TBD NYI */ |
| |
| /* png_set_packswap */ |
| /*NOTE: TBD NYI */ |
| |
| /* png_set_invert_mono */ |
| /*NOTE: TBD NYI */ |
| |
| /* png_set_shift(png_structp, png_const_color_8p true_bits) */ |
| /*NOTE: TBD NYI */ |
| |
| static void |
| perform_transform_test(png_modifier *pm) |
| { |
| png_byte colour_type = 0; |
| png_byte bit_depth = 0; |
| int palette_number = 0; |
| |
| while (next_format(&colour_type, &bit_depth, &palette_number)) |
| { |
| png_uint_32 counter = 0; |
| size_t base_pos; |
| char name[64]; |
| |
| base_pos = safecat(name, sizeof name, 0, "transform:"); |
| |
| for (;;) |
| { |
| size_t pos = base_pos; |
| PNG_CONST image_transform *list = 0; |
| |
| /* 'max' is currently hardwired to '1'; this should be settable on the |
| * command line. |
| */ |
| counter = image_transform_add(&list, 1/*max*/, counter, |
| name, sizeof name, &pos, colour_type, bit_depth); |
| |
| if (counter == 0) |
| break; |
| |
| /* The command line can change this to checking interlaced images. */ |
| do |
| { |
| pm->repeat = 0; |
| transform_test(pm, FILEID(colour_type, bit_depth, palette_number, |
| pm->interlace_type, 0, 0, 0), list, name); |
| |
| if (fail(pm)) |
| return; |
| } |
| while (pm->repeat); |
| } |
| } |
| } |
| #endif /* PNG_READ_TRANSFORMS_SUPPORTED */ |
| |
| /********************************* GAMMA TESTS ********************************/ |
| #ifdef PNG_READ_GAMMA_SUPPORTED |
| /* Reader callbacks and implementations, where they differ from the standard |
| * ones. |
| */ |
| typedef struct gamma_display |
| { |
| standard_display this; |
| |
| /* Parameters */ |
| png_modifier* pm; |
| double file_gamma; |
| double screen_gamma; |
| double background_gamma; |
| png_byte sbit; |
| int threshold_test; |
| int use_input_precision; |
| int scale16; |
| int expand16; |
| int do_background; |
| png_color_16 background_color; |
| |
| /* Local variables */ |
| double maxerrout; |
| double maxerrpc; |
| double maxerrabs; |
| } gamma_display; |
| |
| #define ALPHA_MODE_OFFSET 4 |
| |
| static void |
| gamma_display_init(gamma_display *dp, png_modifier *pm, png_uint_32 id, |
| double file_gamma, double screen_gamma, png_byte sbit, int threshold_test, |
| int use_input_precision, int scale16, int expand16, |
| int do_background, PNG_CONST png_color_16 *pointer_to_the_background_color, |
| double background_gamma) |
| { |
| /* Standard fields */ |
| standard_display_init(&dp->this, &pm->this, id, 0/*do_interlace*/, |
| pm->use_update_info); |
| |
| /* Parameter fields */ |
| dp->pm = pm; |
| dp->file_gamma = file_gamma; |
| dp->screen_gamma = screen_gamma; |
| dp->background_gamma = background_gamma; |
| dp->sbit = sbit; |
| dp->threshold_test = threshold_test; |
| dp->use_input_precision = use_input_precision; |
| dp->scale16 = scale16; |
| dp->expand16 = expand16; |
| dp->do_background = do_background; |
| if (do_background && pointer_to_the_background_color != 0) |
| dp->background_color = *pointer_to_the_background_color; |
| else |
| memset(&dp->background_color, 0, sizeof dp->background_color); |
| |
| /* Local variable fields */ |
| dp->maxerrout = dp->maxerrpc = dp->maxerrabs = 0; |
| } |
| |
| static void |
| gamma_info_imp(gamma_display *dp, png_structp pp, png_infop pi) |
| { |
| /* Reuse the standard stuff as appropriate. */ |
| standard_info_part1(&dp->this, pp, pi); |
| |
| /* If requested strip 16 to 8 bits - this is handled automagically below |
| * because the output bit depth is read from the library. Note that there |
| * are interactions with sBIT but, internally, libpng makes sbit at most |
| * PNG_MAX_GAMMA_8 when doing the following. |
| */ |
| if (dp->scale16) |
| # ifdef PNG_READ_SCALE_16_TO_8_SUPPORTED |
| png_set_scale_16(pp); |
| # else |
| /* The following works both in 1.5.4 and earlier versions: */ |
| # ifdef PNG_READ_16_TO_8_SUPPORTED |
| png_set_strip_16(pp); |
| # else |
| png_error(pp, "scale16 (16 to 8 bit conversion) not supported"); |
| # endif |
| # endif |
| |
| if (dp->expand16) |
| # ifdef PNG_READ_EXPAND_16_SUPPORTED |
| png_set_expand_16(pp); |
| # else |
| png_error(pp, "expand16 (8 to 16 bit conversion) not supported"); |
| # endif |
| |
| if (dp->do_background >= ALPHA_MODE_OFFSET) |
| { |
| # ifdef PNG_READ_ALPHA_MODE_SUPPORTED |
| { |
| /* This tests the alpha mode handling, if supported. */ |
| int mode = dp->do_background - ALPHA_MODE_OFFSET; |
| |
| /* The gamma value is the output gamma, and is in the standard, |
| * non-inverted, represenation. It provides a default for the PNG file |
| * gamma, but since the file has a gAMA chunk this does not matter. |
| */ |
| PNG_CONST double sg = dp->screen_gamma; |
| # ifndef PNG_FLOATING_POINT_SUPPORTED |
| PNG_CONST png_fixed_point g = fix(sg); |
| # endif |
| |
| # ifdef PNG_FLOATING_POINT_SUPPORTED |
| png_set_alpha_mode(pp, mode, sg); |
| # else |
| png_set_alpha_mode_fixed(pp, mode, g); |
| # endif |
| |
| /* However, for the standard Porter-Duff algorithm the output defaults |
| * to be linear, so if the test requires non-linear output it must be |
| * corrected here. |
| */ |
| if (mode == PNG_ALPHA_STANDARD && sg != 1) |
| { |
| # ifdef PNG_FLOATING_POINT_SUPPORTED |
| png_set_gamma(pp, sg, dp->file_gamma); |
| # else |
| png_fixed_point f = fix(dp->file_gamma); |
| png_set_gamma_fixed(pp, g, f); |
| # endif |
| } |
| } |
| # else |
| png_error(pp, "alpha mode handling not supported"); |
| # endif |
| } |
| |
| else |
| { |
| /* Set up gamma processing. */ |
| # ifdef PNG_FLOATING_POINT_SUPPORTED |
| png_set_gamma(pp, dp->screen_gamma, dp->file_gamma); |
| # else |
| { |
| png_fixed_point s = fix(dp->screen_gamma); |
| png_fixed_point f = fix(dp->file_gamma); |
| png_set_gamma_fixed(pp, s, f); |
| } |
| # endif |
| |
| if (dp->do_background) |
| { |
| # ifdef PNG_READ_BACKGROUND_SUPPORTED |
| /* NOTE: this assumes the caller provided the correct background gamma! |
| */ |
| PNG_CONST double bg = dp->background_gamma; |
| # ifndef PNG_FLOATING_POINT_SUPPORTED |
| PNG_CONST png_fixed_point g = fix(bg); |
| # endif |
| |
| # ifdef PNG_FLOATING_POINT_SUPPORTED |
| png_set_background(pp, &dp->background_color, dp->do_background, |
| 0/*need_expand*/, bg); |
| # else |
| png_set_background_fixed(pp, &dp->background_color, |
| dp->do_background, 0/*need_expand*/, g); |
| # endif |
| # else |
| png_error(pp, "png_set_background not supported"); |
| # endif |
| } |
| } |
| |
| { |
| int i = dp->this.use_update_info; |
| /* Always do one call, even if use_update_info is 0. */ |
| do |
| png_read_update_info(pp, pi); |
| while (--i > 0); |
| } |
| |
| /* Now we may get a different cbRow: */ |
| standard_info_part2(&dp->this, pp, pi, 1 /*images*/); |
| } |
| |
| static void |
| gamma_info(png_structp pp, png_infop pi) |
| { |
| gamma_info_imp(voidcast(gamma_display*, png_get_progressive_ptr(pp)), pp, |
| pi); |
| } |
| |
| /* Validate a single component value - the routine gets the input and output |
| * sample values as unscaled PNG component values along with a cache of all the |
| * information required to validate the values. |
| */ |
| typedef struct validate_info |
| { |
| png_const_structp pp; |
| gamma_display *dp; |
| png_byte sbit; |
| int use_input_precision; |
| int do_background; |
| int scale16; |
| unsigned int sbit_max; |
| unsigned int isbit_shift; |
| unsigned int outmax; |
| |
| double gamma_correction; /* Overall correction required. */ |
| double file_inverse; /* Inverse of file gamma. */ |
| double screen_gamma; |
| double screen_inverse; /* Inverse of screen gamma. */ |
| |
| double background_red; /* Linear background value, red or gray. */ |
| double background_green; |
| double background_blue; |
| |
| double maxabs; |
| double maxpc; |
| double maxcalc; |
| double maxout; |
| double maxout_total; /* Total including quantization error */ |
| double outlog; |
| int outquant; |
| } |
| validate_info; |
| |
| static void |
| init_validate_info(validate_info *vi, gamma_display *dp, png_const_structp pp, |
| int in_depth, int out_depth) |
| { |
| PNG_CONST unsigned int outmax = (1U<<out_depth)-1; |
| |
| vi->pp = pp; |
| vi->dp = dp; |
| |
| if (dp->sbit > 0 && dp->sbit < in_depth) |
| { |
| vi->sbit = dp->sbit; |
| vi->isbit_shift = in_depth - dp->sbit; |
| } |
| |
| else |
| { |
| vi->sbit = (png_byte)in_depth; |
| vi->isbit_shift = 0; |
| } |
| |
| vi->sbit_max = (1U << vi->sbit)-1; |
| |
| /* This mimics the libpng threshold test, '0' is used to prevent gamma |
| * correction in the validation test. |
| */ |
| vi->screen_gamma = dp->screen_gamma; |
| if (fabs(vi->screen_gamma-1) < PNG_GAMMA_THRESHOLD) |
| vi->screen_gamma = vi->screen_inverse = 0; |
| else |
| vi->screen_inverse = 1/vi->screen_gamma; |
| |
| vi->use_input_precision = dp->use_input_precision; |
| vi->outmax = outmax; |
| vi->maxabs = abserr(dp->pm, in_depth, out_depth); |
| vi->maxpc = pcerr(dp->pm, in_depth, out_depth); |
| vi->maxcalc = calcerr(dp->pm, in_depth, out_depth); |
| vi->maxout = outerr(dp->pm, in_depth, out_depth); |
| vi->outquant = output_quantization_factor(dp->pm, in_depth, out_depth); |
| vi->maxout_total = vi->maxout + vi->outquant * .5; |
| vi->outlog = outlog(dp->pm, in_depth, out_depth); |
| |
| if ((dp->this.colour_type & PNG_COLOR_MASK_ALPHA) != 0 || |
| (dp->this.colour_type == 3 && dp->this.is_transparent)) |
| { |
| vi->do_background = dp->do_background; |
| |
| if (vi->do_background != 0) |
| { |
| PNG_CONST double bg_inverse = 1/dp->background_gamma; |
| double r, g, b; |
| |
| /* Caller must at least put the gray value into the red channel */ |
| r = dp->background_color.red; r /= outmax; |
| g = dp->background_color.green; g /= outmax; |
| b = dp->background_color.blue; b /= outmax; |
| |
| # if 0 |
| /* libpng doesn't do this optimization, if we do pngvalid will fail. |
| */ |
| if (fabs(bg_inverse-1) >= PNG_GAMMA_THRESHOLD) |
| # endif |
| { |
| r = pow(r, bg_inverse); |
| g = pow(g, bg_inverse); |
| b = pow(b, bg_inverse); |
| } |
| |
| vi->background_red = r; |
| vi->background_green = g; |
| vi->background_blue = b; |
| } |
| } |
| else |
| vi->do_background = 0; |
| |
| if (vi->do_background == 0) |
| vi->background_red = vi->background_green = vi->background_blue = 0; |
| |
| vi->gamma_correction = 1/(dp->file_gamma*dp->screen_gamma); |
| if (fabs(vi->gamma_correction-1) < PNG_GAMMA_THRESHOLD) |
| vi->gamma_correction = 0; |
| |
| vi->file_inverse = 1/dp->file_gamma; |
| if (fabs(vi->file_inverse-1) < PNG_GAMMA_THRESHOLD) |
| vi->file_inverse = 0; |
| |
| vi->scale16 = dp->scale16; |
| } |
| |
| /* This function handles composition of a single non-alpha component. The |
| * argument is the input sample value, in the range 0..1, and the alpha value. |
| * The result is the composed, linear, input sample. If alpha is less than zero |
| * this is the alpha component and the function should not be called! |
| */ |
| static double |
| gamma_component_compose(int do_background, double input_sample, double alpha, |
| double background, int *compose) |
| { |
| switch (do_background) |
| { |
| case PNG_BACKGROUND_GAMMA_SCREEN: |
| case PNG_BACKGROUND_GAMMA_FILE: |
| case PNG_BACKGROUND_GAMMA_UNIQUE: |
| /* Standard PNG background processing. */ |
| if (alpha < 1) |
| { |
| if (alpha > 0) |
| { |
| input_sample = input_sample * alpha + background * (1-alpha); |
| if (compose != NULL) |
| *compose = 1; |
| } |
| |
| else |
| input_sample = background; |
| } |
| break; |
| |
| #ifdef PNG_READ_ALPHA_MODE_SUPPORTED |
| case ALPHA_MODE_OFFSET + PNG_ALPHA_STANDARD: |
| case ALPHA_MODE_OFFSET + PNG_ALPHA_BROKEN: |
| /* The components are premultiplied in either case and the output is |
| * gamma encoded (to get standard Porter-Duff we expect the output |
| * gamma to be set to 1.0!) |
| */ |
| case ALPHA_MODE_OFFSET + PNG_ALPHA_OPTIMIZED: |
| /* The optimization is that the partial-alpha entries are linear |
| * while the opaque pixels are gamma encoded, but this only affects the |
| * output encoding. |
| */ |
| if (alpha < 1) |
| { |
| if (alpha > 0) |
| { |
| input_sample *= alpha; |
| if (compose != NULL) |
| *compose = 1; |
| } |
| |
| else |
| input_sample = 0; |
| } |
| break; |
| #endif |
| |
| default: |
| /* Standard cases where no compositing is done (so the component |
| * value is already correct.) |
| */ |
| break; |
| } |
| |
| return input_sample; |
| } |
| |
| /* This API returns the encoded *input* component, in the range 0..1 */ |
| static double |
| gamma_component_validate(PNG_CONST char *name, PNG_CONST validate_info *vi, |
| PNG_CONST unsigned int id, PNG_CONST unsigned int od, |
| PNG_CONST double alpha /* <0 for the alpha channel itself */, |
| PNG_CONST double background /* component background value */) |
| { |
| PNG_CONST unsigned int isbit = id >> vi->isbit_shift; |
| PNG_CONST unsigned int sbit_max = vi->sbit_max; |
| PNG_CONST unsigned int outmax = vi->outmax; |
| PNG_CONST int do_background = vi->do_background; |
| |
| double i; |
| |
| /* First check on the 'perfect' result obtained from the digitized input |
| * value, id, and compare this against the actual digitized result, 'od'. |
| * 'i' is the input result in the range 0..1: |
| */ |
| i = isbit; i /= sbit_max; |
| |
| /* Check for the fast route: if we don't do any background composition or if |
| * this is the alpha channel ('alpha' < 0) or if the pixel is opaque then |
| * just use the gamma_correction field to correct to the final output gamma. |
| */ |
| if (alpha == 1 /* opaque pixel component */ || !do_background |
| #ifdef PNG_READ_ALPHA_MODE_SUPPORTED |
| || do_background == ALPHA_MODE_OFFSET + PNG_ALPHA_PNG |
| #endif |
| || (alpha < 0 /* alpha channel */ |
| #ifdef PNG_READ_ALPHA_MODE_SUPPORTED |
| && do_background != ALPHA_MODE_OFFSET + PNG_ALPHA_BROKEN |
| #endif |
| )) |
| { |
| /* Then get the gamma corrected version of 'i' and compare to 'od', any |
| * error less than .5 is insignificant - just quantization of the output |
| * value to the nearest digital value (nevertheless the error is still |
| * recorded - it's interesting ;-) |
| */ |
| double encoded_sample = i; |
| double encoded_error; |
| |
| /* alpha less than 0 indicates the alpha channel, which is always linear |
| */ |
| if (alpha >= 0 && vi->gamma_correction > 0) |
| encoded_sample = pow(encoded_sample, vi->gamma_correction); |
| encoded_sample *= outmax; |
| |
| encoded_error = fabs(od-encoded_sample); |
| |
| if (encoded_error > vi->dp->maxerrout) |
| vi->dp->maxerrout = encoded_error; |
| |
| if (encoded_error < vi->maxout_total && encoded_error < vi->outlog) |
| return i; |
| } |
| |
| /* The slow route - attempt to do linear calculations. */ |
| /* There may be an error, or background processing is required, so calculate |
| * the actual sample values - unencoded light intensity values. Note that in |
| * practice these are not completely unencoded because they include a |
| * 'viewing correction' to decrease or (normally) increase the perceptual |
| * contrast of the image. There's nothing we can do about this - we don't |
| * know what it is - so assume the unencoded value is perceptually linear. |
| */ |
| { |
| double input_sample = i; /* In range 0..1 */ |
| double output, error, encoded_sample, encoded_error; |
| double es_lo, es_hi; |
| int compose = 0; /* Set to one if composition done */ |
| int output_is_encoded; /* Set if encoded to screen gamma */ |
| int log_max_error = 1; /* Check maximum error values */ |
| png_const_charp pass = 0; /* Reason test passes (or 0 for fail) */ |
| |
| /* Convert to linear light (with the above caveat.) The alpha channel is |
| * already linear. |
| */ |
| if (alpha >= 0) |
| { |
| int tcompose; |
| |
| if (vi->file_inverse > 0) |
| input_sample = pow(input_sample, vi->file_inverse); |
| |
| /* Handle the compose processing: */ |
| tcompose = 0; |
| input_sample = gamma_component_compose(do_background, input_sample, |
| alpha, background, &tcompose); |
| |
| if (tcompose) |
| compose = 1; |
| } |
| |
| /* And similarly for the output value, but we need to check the background |
| * handling to linearize it correctly. |
| */ |
| output = od; |
| output /= outmax; |
| |
| output_is_encoded = vi->screen_gamma > 0; |
| |
| if (alpha < 0) /* The alpha channel */ |
| { |
| #ifdef PNG_READ_ALPHA_MODE_SUPPORTED |
| if (do_background != ALPHA_MODE_OFFSET + PNG_ALPHA_BROKEN) |
| #endif |
| { |
| /* In all other cases the output alpha channel is linear already, |
| * don't log errors here, they are much larger in linear data. |
| */ |
| output_is_encoded = 0; |
| log_max_error = 0; |
| } |
| } |
| |
| #ifdef PNG_READ_ALPHA_MODE_SUPPORTED |
| else /* A component */ |
| { |
| if (do_background == ALPHA_MODE_OFFSET + PNG_ALPHA_OPTIMIZED && |
| alpha < 1) /* the optimized case - linear output */ |
| { |
| if (alpha > 0) log_max_error = 0; |
| output_is_encoded = 0; |
| } |
| } |
| #endif |
| |
| if (output_is_encoded) |
| output = pow(output, vi->screen_gamma); |
| |
| /* Calculate (or recalculate) the encoded_sample value and repeat the |
| * check above (unnecessary if we took the fast route, but harmless.) |
| */ |
| encoded_sample = input_sample; |
| if (output_is_encoded) |
| encoded_sample = pow(encoded_sample, vi->screen_inverse); |
| encoded_sample *= outmax; |
| |
| encoded_error = fabs(od-encoded_sample); |
| |
| /* Don't log errors in the alpha channel, or the 'optimized' case, |
| * neither are significant to the overall perception. |
| */ |
| if (log_max_error && encoded_error > vi->dp->maxerrout) |
| vi->dp->maxerrout = encoded_error; |
| |
| if (encoded_error < vi->maxout_total) |
| { |
| if (encoded_error < vi->outlog) |
| return i; |
| |
| /* Test passed but error is bigger than the log limit, record why the |
| * test passed: |
| */ |
| pass = "less than maxout:\n"; |
| } |
| |
| /* i: the original input value in the range 0..1 |
| * |
| * pngvalid calculations: |
| * input_sample: linear result; i linearized and composed, range 0..1 |
| * encoded_sample: encoded result; input_sample scaled to ouput bit depth |
| * |
| * libpng calculations: |
| * output: linear result; od scaled to 0..1 and linearized |
| * od: encoded result from libpng |
| */ |
| |
| /* Now we have the numbers for real errors, both absolute values as as a |
| * percentage of the correct value (output): |
| */ |
| error = fabs(input_sample-output); |
| |
| if (log_max_error && error > vi->dp->maxerrabs) |
| vi->dp->maxerrabs = error; |
| |
| /* The following is an attempt to ignore the tendency of quantization to |
| * dominate the percentage errors for lower result values: |
| */ |
| if (log_max_error && input_sample > .5) |
| { |
| double percentage_error = error/input_sample; |
| if (percentage_error > vi->dp->maxerrpc) |
| vi->dp->maxerrpc = percentage_error; |
| } |
| |
| /* Now calculate the digitization limits for 'encoded_sample' using the |
| * 'max' values. Note that maxout is in the encoded space but maxpc and |
| * maxabs are in linear light space. |
| * |
| * First find the maximum error in linear light space, range 0..1: |
| */ |
| { |
| double tmp = input_sample * vi->maxpc; |
| if (tmp < vi->maxabs) tmp = vi->maxabs; |
| /* If 'compose' is true the composition was done in linear space using |
| * integer arithmetic. This introduces an extra error of +/- 0.5 (at |
| * least) in the integer space used. 'maxcalc' records this, taking |
| * into account the possibility that even for 16 bit output 8 bit space |
| * may have been used. |
| */ |
| if (compose && tmp < vi->maxcalc) tmp = vi->maxcalc; |
| |
| /* The 'maxout' value refers to the encoded result, to compare with |
| * this encode input_sample adjusted by the maximum error (tmp) above. |
| */ |
| es_lo = encoded_sample - vi->maxout; |
| |
| if (es_lo > 0 && input_sample-tmp > 0) |
| { |
| double low_value = input_sample-tmp; |
| if (output_is_encoded) |
| low_value = pow(low_value, vi->screen_inverse); |
| low_value *= outmax; |
| if (low_value < es_lo) es_lo = low_value; |
| |
| /* Quantize this appropriately: */ |
| es_lo = ceil(es_lo / vi->outquant - .5) * vi->outquant; |
| } |
| |
| else |
| es_lo = 0; |
| |
| es_hi = encoded_sample + vi->maxout; |
| |
| if (es_hi < outmax && input_sample+tmp < 1) |
| { |
| double high_value = input_sample+tmp; |
| if (output_is_encoded) |
| high_value = pow(high_value, vi->screen_inverse); |
| high_value *= outmax; |
| if (high_value > es_hi) es_hi = high_value; |
| |
| es_hi = floor(es_hi / vi->outquant + .5) * vi->outquant; |
| } |
| |
| else |
| es_hi = outmax; |
| } |
| |
| /* The primary test is that the final encoded value returned by the |
| * library should be between the two limits (inclusive) that were |
| * calculated above. |
| */ |
| if (od >= es_lo && od <= es_hi) |
| { |
| /* The value passes, but we may need to log the information anyway. */ |
| if (encoded_error < vi->outlog) |
| return i; |
| |
| if (pass == 0) |
| pass = "within digitization limits:\n"; |
| } |
| |
| { |
| /* There has been an error in processing, or we need to log this |
| * value. |
| */ |
| double is_lo, is_hi; |
| |
| /* pass is set at this point if either of the tests above would have |
| * passed. Don't do these additional tests here - just log the |
| * original [es_lo..es_hi] values. |
| */ |
| if (pass == 0 && vi->use_input_precision) |
| { |
| /* Ok, something is wrong - this actually happens in current libpng |
| * 16-to-8 processing. Assume that the input value (id, adjusted |
| * for sbit) can be anywhere between value-.5 and value+.5 - quite a |
| * large range if sbit is low. |
| */ |
| double tmp = (isbit - .5)/sbit_max; |
| |
| if (tmp <= 0) |
| tmp = 0; |
| |
| else if (alpha >= 0 && vi->file_inverse > 0 && tmp < 1) |
| tmp = pow(tmp, vi->file_inverse); |
| |
| tmp = gamma_component_compose(do_background, tmp, alpha, background, |
| NULL); |
| |
| if (output_is_encoded && tmp > 0 && tmp < 1) |
| tmp = pow(tmp, vi->screen_inverse); |
| |
| is_lo = ceil(outmax * tmp - vi->maxout_total); |
| |
| if (is_lo < 0) |
| is_lo = 0; |
| |
| tmp = (isbit + .5)/sbit_max; |
| |
| if (tmp <= 0) |
| tmp = 0; |
| |
| else if (alpha >= 0 && vi->file_inverse > 0 && tmp < 1) |
| tmp = pow(tmp, vi->file_inverse); |
| |
| tmp = gamma_component_compose(do_background, tmp, alpha, background, |
| NULL); |
| |
| if (output_is_encoded && tmp > 0 && tmp < 1) |
| tmp = pow(tmp, vi->screen_inverse); |
| |
| is_hi = floor(outmax * tmp + vi->maxout_total); |
| |
| if (is_hi > outmax) |
| is_hi = outmax; |
| |
| if (!(od < is_lo || od > is_hi)) |
| { |
| if (encoded_error < vi->outlog) |
| return i; |
| |
| pass = "within input precision limits:\n"; |
| } |
| |
| /* One last chance. If this is an alpha channel and the 16to8 |
| * option has been used and 'inaccurate' scaling is used then the |
| * bit reduction is obtained by simply using the top 8 bits of the |
| * value. |
| * |
| * This is only done for older libpng versions when the 'inaccurate' |
| * (chop) method of scaling was used. |
| */ |
| # ifndef PNG_READ_16_TO_8_ACCURATE_SCALE_SUPPORTED |
| # if PNG_LIBPNG_VER < 10504 |
| /* This may be required for other components in the future, |
| * but at present the presence of gamma correction effectively |
| * prevents the errors in the component scaling (I don't quite |
| * understand why, but since it's better this way I care not |
| * to ask, JB 20110419.) |
| */ |
| if (pass == 0 && alpha < 0 && vi->scale16 && vi->sbit > 8 && |
| vi->sbit + vi->isbit_shift == 16) |
| { |
| tmp = ((id >> 8) - .5)/255; |
| |
| if (tmp > 0) |
| { |
| is_lo = ceil(outmax * tmp - vi->maxout_total); |
| if (is_lo < 0) is_lo = 0; |
| } |
| |
| else |
| is_lo = 0; |
| |
| tmp = ((id >> 8) + .5)/255; |
| |
| if (tmp < 1) |
| { |
| is_hi = floor(outmax * tmp + vi->maxout_total); |
| if (is_hi > outmax) is_hi = outmax; |
| } |
| |
| else |
| is_hi = outmax; |
| |
| if (!(od < is_lo || od > is_hi)) |
| { |
| if (encoded_error < vi->outlog) |
| return i; |
| |
| pass = "within 8 bit limits:\n"; |
| } |
| } |
| # endif |
| # endif |
| } |
| else /* !use_input_precision */ |
| is_lo = es_lo, is_hi = es_hi; |
| |
| /* Attempt to output a meaningful error/warning message: the message |
| * output depends on the background/composite operation being performed |
| * because this changes what parameters were actually used above. |
| */ |
| { |
| size_t pos = 0; |
| /* Need either 1/255 or 1/65535 precision here; 3 or 6 decimal |
| * places. Just use outmax to work out which. |
| */ |
| int precision = (outmax >= 1000 ? 6 : 3); |
| int use_input=1, use_background=0, do_compose=0; |
| char msg[256]; |
| |
| if (pass != 0) |
| pos = safecat(msg, sizeof msg, pos, "\n\t"); |
| |
| /* Set up the various flags, the output_is_encoded flag above |
| * is also used below. do_compose is just a double check. |
| */ |
| switch (do_background) |
| { |
| case PNG_BACKGROUND_GAMMA_SCREEN: |
| case PNG_BACKGROUND_GAMMA_FILE: |
| case PNG_BACKGROUND_GAMMA_UNIQUE: |
| use_background = (alpha >= 0 && alpha < 1); |
| /*FALL THROUGH*/ |
| # ifdef PNG_READ_ALPHA_MODE_SUPPORTED |
| case ALPHA_MODE_OFFSET + PNG_ALPHA_STANDARD: |
| case ALPHA_MODE_OFFSET + PNG_ALPHA_BROKEN: |
| case ALPHA_MODE_OFFSET + PNG_ALPHA_OPTIMIZED: |
| # endif /* ALPHA_MODE_SUPPORTED */ |
| do_compose = (alpha > 0 && alpha < 1); |
| use_input = (alpha != 0); |
| break; |
| |
| default: |
| break; |
| } |
| |
| /* Check the 'compose' flag */ |
| if (compose != do_compose) |
| png_error(vi->pp, "internal error (compose)"); |
| |
| /* 'name' is the component name */ |
| pos = safecat(msg, sizeof msg, pos, name); |
| pos = safecat(msg, sizeof msg, pos, "("); |
| pos = safecatn(msg, sizeof msg, pos, id); |
| if (use_input || pass != 0/*logging*/) |
| { |
| if (isbit != id) |
| { |
| /* sBIT has reduced the precision of the input: */ |
| pos = safecat(msg, sizeof msg, pos, ", sbit("); |
| pos = safecatn(msg, sizeof msg, pos, vi->sbit); |
| pos = safecat(msg, sizeof msg, pos, "): "); |
| pos = safecatn(msg, sizeof msg, pos, isbit); |
| } |
| pos = safecat(msg, sizeof msg, pos, "/"); |
| /* The output is either "id/max" or "id sbit(sbit): isbit/max" */ |
| pos = safecatn(msg, sizeof msg, pos, vi->sbit_max); |
| } |
| pos = safecat(msg, sizeof msg, pos, ")"); |
| |
| /* A component may have been multiplied (in linear space) by the |
| * alpha value, 'compose' says whether this is relevant. |
| */ |
| if (compose || pass != 0) |
| { |
| /* If any form of composition is being done report our |
| * calculated linear value here (the code above doesn't record |
| * the input value before composition is performed, so what |
| * gets reported is the value after composition.) |
| */ |
| if (use_input || pass != 0) |
| { |
| if (vi->file_inverse > 0) |
| { |
| pos = safecat(msg, sizeof msg, pos, "^"); |
| pos = safecatd(msg, sizeof msg, pos, vi->file_inverse, 2); |
| } |
| |
| else |
| pos = safecat(msg, sizeof msg, pos, "[linear]"); |
| |
| pos = safecat(msg, sizeof msg, pos, "*(alpha)"); |
| pos = safecatd(msg, sizeof msg, pos, alpha, precision); |
| } |
| |
| /* Now record the *linear* background value if it was used |
| * (this function is not passed the original, non-linear, |
| * value but it is contained in the test name.) |
| */ |
| if (use_background) |
| { |
| pos = safecat(msg, sizeof msg, pos, use_input ? "+" : " "); |
| pos = safecat(msg, sizeof msg, pos, "(background)"); |
| pos = safecatd(msg, sizeof msg, pos, background, precision); |
| pos = safecat(msg, sizeof msg, pos, "*"); |
| pos = safecatd(msg, sizeof msg, pos, 1-alpha, precision); |
| } |
| } |
| |
| /* Report the calculated value (input_sample) and the linearized |
| * libpng value (output) unless this is just a component gamma |
| * correction. |
| */ |
| if (compose || alpha < 0 || pass != 0) |
| { |
| pos = safecat(msg, sizeof msg, pos, |
| pass != 0 ? " =\n\t" : " = "); |
| pos = safecatd(msg, sizeof msg, pos, input_sample, precision); |
| pos = safecat(msg, sizeof msg, pos, " (libpng: "); |
| pos = safecatd(msg, sizeof msg, pos, output, precision); |
| pos = safecat(msg, sizeof msg, pos, ")"); |
| |
| /* Finally report the output gamma encoding, if any. */ |
| if (output_is_encoded) |
| { |
| pos = safecat(msg, sizeof msg, pos, " ^"); |
| pos = safecatd(msg, sizeof msg, pos, vi->screen_inverse, 2); |
| pos = safecat(msg, sizeof msg, pos, "(to screen) ="); |
| } |
| |
| else |
| pos = safecat(msg, sizeof msg, pos, " [screen is linear] ="); |
| } |
| |
| if ((!compose && alpha >= 0) || pass != 0) |
| { |
| if (pass != 0) /* logging */ |
| pos = safecat(msg, sizeof msg, pos, "\n\t[overall:"); |
| |
| /* This is the non-composition case, the internal linear |
| * values are irrelevant (though the log below will reveal |
| * them.) Output a much shorter warning/error message and report |
| * the overall gamma correction. |
| */ |
| if (vi->gamma_correction > 0) |
| { |
| pos = safecat(msg, sizeof msg, pos, " ^"); |
| pos = safecatd(msg, sizeof msg, pos, vi->gamma_correction, 2); |
| pos = safecat(msg, sizeof msg, pos, "(gamma correction) ="); |
| } |
| |
| else |
| pos = safecat(msg, sizeof msg, pos, |
| " [no gamma correction] ="); |
| |
| if (pass != 0) |
| pos = safecat(msg, sizeof msg, pos, "]"); |
| } |
| |
| /* This is our calculated encoded_sample which should (but does |
| * not) match od: |
| */ |
| pos = safecat(msg, sizeof msg, pos, pass != 0 ? "\n\t" : " "); |
| pos = safecatd(msg, sizeof msg, pos, is_lo, 1); |
| pos = safecat(msg, sizeof msg, pos, " < "); |
| pos = safecatd(msg, sizeof msg, pos, encoded_sample, 1); |
| pos = safecat(msg, sizeof msg, pos, " (libpng: "); |
| pos = safecatn(msg, sizeof msg, pos, od); |
| pos = safecat(msg, sizeof msg, pos, ")"); |
| pos = safecat(msg, sizeof msg, pos, "/"); |
| pos = safecatn(msg, sizeof msg, pos, outmax); |
| pos = safecat(msg, sizeof msg, pos, " < "); |
| pos = safecatd(msg, sizeof msg, pos, is_hi, 1); |
| |
| if (pass == 0) /* The error condition */ |
| { |
| # ifdef PNG_WARNINGS_SUPPORTED |
| png_warning(vi->pp, msg); |
| # else |
| store_warning(vi->pp, msg); |
| # endif |
| } |
| |
| else /* logging this value */ |
| store_verbose(&vi->dp->pm->this, vi->pp, pass, msg); |
| } |
| } |
| } |
| |
| return i; |
| } |
| |
| static void |
| gamma_image_validate(gamma_display *dp, png_const_structp pp, |
| png_infop pi) |
| { |
| /* Get some constants derived from the input and output file formats: */ |
| PNG_CONST png_store* PNG_CONST ps = dp->this.ps; |
| PNG_CONST png_byte in_ct = dp->this.colour_type; |
| PNG_CONST png_byte in_bd = dp->this.bit_depth; |
| PNG_CONST png_uint_32 w = dp->this.w; |
| PNG_CONST png_uint_32 h = dp->this.h; |
| PNG_CONST size_t cbRow = dp->this.cbRow; |
| PNG_CONST png_byte out_ct = png_get_color_type(pp, pi); |
| PNG_CONST png_byte out_bd = png_get_bit_depth(pp, pi); |
| |
| /* There are three sources of error, firstly the quantization in the |
| * file encoding, determined by sbit and/or the file depth, secondly |
| * the output (screen) gamma and thirdly the output file encoding. |
| * |
| * Since this API receives the screen and file gamma in double |
| * precision it is possible to calculate an exact answer given an input |
| * pixel value. Therefore we assume that the *input* value is exact - |
| * sample/maxsample - calculate the corresponding gamma corrected |
| * output to the limits of double precision arithmetic and compare with |
| * what libpng returns. |
| * |
| * Since the library must quantize the output to 8 or 16 bits there is |
| * a fundamental limit on the accuracy of the output of +/-.5 - this |
| * quantization limit is included in addition to the other limits |
| * specified by the paramaters to the API. (Effectively, add .5 |
| * everywhere.) |
| * |
| * The behavior of the 'sbit' paramter is defined by section 12.5 |
| * (sample depth scaling) of the PNG spec. That section forces the |
| * decoder to assume that the PNG values have been scaled if sBIT is |
| * present: |
| * |
| * png-sample = floor( input-sample * (max-out/max-in) + .5); |
| * |
| * This means that only a subset of the possible PNG values should |
| * appear in the input. However, the spec allows the encoder to use a |
| * variety of approximations to the above and doesn't require any |
| * restriction of the values produced. |
| * |
| * Nevertheless the spec requires that the upper 'sBIT' bits of the |
| * value stored in a PNG file be the original sample bits. |
| * Consequently the code below simply scales the top sbit bits by |
| * (1<<sbit)-1 to obtain an original sample value. |
| * |
| * Because there is limited precision in the input it is arguable that |
| * an acceptable result is any valid result from input-.5 to input+.5. |
| * The basic tests below do not do this, however if 'use_input_precision' |
| * is set a subsequent test is performed below. |
| */ |
| PNG_CONST unsigned int samples_per_pixel = (out_ct & 2U) ? 3U : 1U; |
| int processing; |
| png_uint_32 y; |
| PNG_CONST store_palette_entry *in_palette = dp->this.palette; |
| PNG_CONST int in_is_transparent = dp->this.is_transparent; |
| int out_npalette = -1; |
| int out_is_transparent = 0; /* Just refers to the palette case */ |
| store_palette out_palette; |
| validate_info vi; |
| |
| /* Check for row overwrite errors */ |
| store_image_check(dp->this.ps, pp, 0); |
| |
| /* Supply the input and output sample depths here - 8 for an indexed image, |
| * otherwise the bit depth. |
| */ |
| init_validate_info(&vi, dp, pp, in_ct==3?8:in_bd, out_ct==3?8:out_bd); |
| |
| processing = (vi.gamma_correction > 0 && !dp->threshold_test) |
| || in_bd != out_bd || in_ct != out_ct || vi.do_background; |
| |
| /* TODO: FIX THIS: MAJOR BUG! If the transformations all happen inside |
| * the palette there is no way of finding out, because libpng fails to |
| * update the palette on png_read_update_info. Indeed, libpng doesn't |
| * even do the required work until much later, when it doesn't have any |
| * info pointer. Oops. For the moment 'processing' is turned off if |
| * out_ct is palette. |
| */ |
| if (in_ct == 3 && out_ct == 3) |
| processing = 0; |
| |
| if (processing && out_ct == 3) |
| out_is_transparent = read_palette(out_palette, &out_npalette, pp, pi); |
| |
| for (y=0; y<h; ++y) |
| { |
| png_const_bytep pRow = store_image_row(ps, pp, 0, y); |
| png_byte std[STANDARD_ROWMAX]; |
| |
| transform_row(pp, std, in_ct, in_bd, y); |
| |
| if (processing) |
| { |
| unsigned int x; |
| |
| for (x=0; x<w; ++x) |
| { |
| double alpha = 1; /* serves as a flag value */ |
| |
| /* Record the palette index for index images. */ |
| PNG_CONST unsigned int in_index = |
| in_ct == 3 ? sample(std, 3, in_bd, x, 0) : 256; |
| PNG_CONST unsigned int out_index = |
| out_ct == 3 ? sample(std, 3, out_bd, x, 0) : 256; |
| |
| /* Handle input alpha - png_set_background will cause the output |
| * alpha to disappear so there is nothing to check. |
| */ |
| if ((in_ct & PNG_COLOR_MASK_ALPHA) != 0 || (in_ct == 3 && |
| in_is_transparent)) |
| { |
| PNG_CONST unsigned int input_alpha = in_ct == 3 ? |
| dp->this.palette[in_index].alpha : |
| sample(std, in_ct, in_bd, x, samples_per_pixel); |
| |
| unsigned int output_alpha = 65536 /* as a flag value */; |
| |
| if (out_ct == 3) |
| { |
| if (out_is_transparent) |
| output_alpha = out_palette[out_index].alpha; |
| } |
| |
| else if ((out_ct & PNG_COLOR_MASK_ALPHA) != 0) |
| output_alpha = sample(pRow, out_ct, out_bd, x, |
| samples_per_pixel); |
| |
| if (output_alpha != 65536) |
| alpha = gamma_component_validate("alpha", &vi, input_alpha, |
| output_alpha, -1/*alpha*/, 0/*background*/); |
| |
| else /* no alpha in output */ |
| { |
| /* This is a copy of the calculation of 'i' above in order to |
| * have the alpha value to use in the background calculation. |
| */ |
| alpha = input_alpha >> vi.isbit_shift; |
| alpha /= vi.sbit_max; |
| } |
| } |
| |
| /* Handle grayscale or RGB components. */ |
| if ((in_ct & PNG_COLOR_MASK_COLOR) == 0) /* grayscale */ |
| (void)gamma_component_validate("gray", &vi, |
| sample(std, in_ct, in_bd, x, 0), |
| sample(pRow, out_ct, out_bd, x, 0), alpha/*component*/, |
| vi.background_red); |
| else /* RGB or palette */ |
| { |
| (void)gamma_component_validate("red", &vi, |
| in_ct == 3 ? in_palette[in_index].red : |
| sample(std, in_ct, in_bd, x, 0), |
| out_ct == 3 ? out_palette[out_index].red : |
| sample(pRow, out_ct, out_bd, x, 0), |
| alpha/*component*/, vi.background_red); |
| |
| (void)gamma_component_validate("green", &vi, |
| in_ct == 3 ? in_palette[in_index].green : |
| sample(std, in_ct, in_bd, x, 1), |
| out_ct == 3 ? out_palette[out_index].green : |
| sample(pRow, out_ct, out_bd, x, 1), |
| alpha/*component*/, vi.background_green); |
| |
| (void)gamma_component_validate("blue", &vi, |
| in_ct == 3 ? in_palette[in_index].blue : |
| sample(std, in_ct, in_bd, x, 2), |
| out_ct == 3 ? out_palette[out_index].blue : |
| sample(pRow, out_ct, out_bd, x, 2), |
| alpha/*component*/, vi.background_blue); |
| } |
| } |
| } |
| |
| else if (memcmp(std, pRow, cbRow) != 0) |
| { |
| char msg[64]; |
| |
| /* No transform is expected on the threshold tests. */ |
| sprintf(msg, "gamma: below threshold row %d changed", y); |
| |
| png_error(pp, msg); |
| } |
| } /* row (y) loop */ |
| |
| dp->this.ps->validated = 1; |
| } |
| |
| static void |
| gamma_end(png_structp ppIn, png_infop pi) |
| { |
| png_const_structp pp = ppIn; |
| gamma_display *dp = voidcast(gamma_display*, png_get_progressive_ptr(pp)); |
| |
| if (!dp->this.speed) |
| gamma_image_validate(dp, pp, pi); |
| else |
| dp->this.ps->validated = 1; |
| } |
| |
| /* A single test run checking a gamma transformation. |
| * |
| * maxabs: maximum absolute error as a fraction |
| * maxout: maximum output error in the output units |
| * maxpc: maximum percentage error (as a percentage) |
| */ |
| static void |
| gamma_test(png_modifier *pmIn, PNG_CONST png_byte colour_typeIn, |
| PNG_CONST png_byte bit_depthIn, PNG_CONST int palette_numberIn, |
| PNG_CONST int interlace_typeIn, |
| PNG_CONST double file_gammaIn, PNG_CONST double screen_gammaIn, |
| PNG_CONST png_byte sbitIn, PNG_CONST int threshold_testIn, |
| PNG_CONST char *name, |
| PNG_CONST int use_input_precisionIn, PNG_CONST int scale16In, |
| PNG_CONST int expand16In, PNG_CONST int do_backgroundIn, |
| PNG_CONST png_color_16 *bkgd_colorIn, double bkgd_gammaIn) |
| { |
| gamma_display d; |
| context(&pmIn->this, fault); |
| |
| gamma_display_init(&d, pmIn, FILEID(colour_typeIn, bit_depthIn, |
| palette_numberIn, interlace_typeIn, 0, 0, 0), |
| file_gammaIn, screen_gammaIn, sbitIn, |
| threshold_testIn, use_input_precisionIn, scale16In, |
| expand16In, do_backgroundIn, bkgd_colorIn, bkgd_gammaIn); |
| |
| Try |
| { |
| png_structp pp; |
| png_infop pi; |
| gama_modification gama_mod; |
| srgb_modification srgb_mod; |
| sbit_modification sbit_mod; |
| |
| /* For the moment don't use the png_modifier support here. */ |
| d.pm->encoding_counter = 0; |
| modifier_set_encoding(d.pm); /* Just resets everything */ |
| d.pm->current_gamma = d.file_gamma; |
| |
| /* Make an appropriate modifier to set the PNG file gamma to the |
| * given gamma value and the sBIT chunk to the given precision. |
| */ |
| d.pm->modifications = NULL; |
| gama_modification_init(&gama_mod, d.pm, d.file_gamma); |
| srgb_modification_init(&srgb_mod, d.pm, 127 /*delete*/); |
| if (d.sbit > 0) |
| sbit_modification_init(&sbit_mod, d.pm, d.sbit); |
| |
| modification_reset(d.pm->modifications); |
| |
| /* Get a png_struct for writing the image. */ |
| pp = set_modifier_for_read(d.pm, &pi, d.this.id, name); |
| standard_palette_init(&d.this); |
| |
| /* Introduce the correct read function. */ |
| if (d.pm->this.progressive) |
| { |
| /* Share the row function with the standard implementation. */ |
| png_set_progressive_read_fn(pp, &d, gamma_info, progressive_row, |
| gamma_end); |
| |
| /* Now feed data into the reader until we reach the end: */ |
| modifier_progressive_read(d.pm, pp, pi); |
| } |
| else |
| { |
| /* modifier_read expects a png_modifier* */ |
| png_set_read_fn(pp, d.pm, modifier_read); |
| |
| /* Check the header values: */ |
| png_read_info(pp, pi); |
| |
| /* Process the 'info' requirements. Only one image is generated */ |
| gamma_info_imp(&d, pp, pi); |
| |
| sequential_row(&d.this, pp, pi, -1, 0); |
| |
| if (!d.this.speed) |
| gamma_image_validate(&d, pp, pi); |
| else |
| d.this.ps->validated = 1; |
| } |
| |
| modifier_reset(d.pm); |
| |
| if (d.pm->log && !d.threshold_test && !d.this.speed) |
| fprintf(stderr, "%d bit %s %s: max error %f (%.2g, %2g%%)\n", |
| d.this.bit_depth, colour_types[d.this.colour_type], name, |
| d.maxerrout, d.maxerrabs, 100*d.maxerrpc); |
| |
| /* Log the summary values too. */ |
| if (d.this.colour_type == 0 || d.this.colour_type == 4) |
| { |
| switch (d.this.bit_depth) |
| { |
| case 1: |
| break; |
| |
| case 2: |
| if (d.maxerrout > d.pm->error_gray_2) |
| d.pm->error_gray_2 = d.maxerrout; |
| |
| break; |
| |
| case 4: |
| if (d.maxerrout > d.pm->error_gray_4) |
| d.pm->error_gray_4 = d.maxerrout; |
| |
| break; |
| |
| case 8: |
| if (d.maxerrout > d.pm->error_gray_8) |
| d.pm->error_gray_8 = d.maxerrout; |
| |
| break; |
| |
| case 16: |
| if (d.maxerrout > d.pm->error_gray_16) |
| d.pm->error_gray_16 = d.maxerrout; |
| |
| break; |
| |
| default: |
| png_error(pp, "bad bit depth (internal: 1)"); |
| } |
| } |
| |
| else if (d.this.colour_type == 2 || d.this.colour_type == 6) |
| { |
| switch (d.this.bit_depth) |
| { |
| case 8: |
| |
| if (d.maxerrout > d.pm->error_color_8) |
| d.pm->error_color_8 = d.maxerrout; |
| |
| break; |
| |
| case 16: |
| |
| if (d.maxerrout > d.pm->error_color_16) |
| d.pm->error_color_16 = d.maxerrout; |
| |
| break; |
| |
| default: |
| png_error(pp, "bad bit depth (internal: 2)"); |
| } |
| } |
| |
| else if (d.this.colour_type == 3) |
| { |
| if (d.maxerrout > d.pm->error_indexed) |
| d.pm->error_indexed = d.maxerrout; |
| } |
| } |
| |
| Catch(fault) |
| modifier_reset((png_modifier*)fault); |
| } |
| |
| static void gamma_threshold_test(png_modifier *pm, png_byte colour_type, |
| png_byte bit_depth, int interlace_type, double file_gamma, |
| double screen_gamma) |
| { |
| size_t pos = 0; |
| char name[64]; |
| pos = safecat(name, sizeof name, pos, "threshold "); |
| pos = safecatd(name, sizeof name, pos, file_gamma, 3); |
| pos = safecat(name, sizeof name, pos, "/"); |
| pos = safecatd(name, sizeof name, pos, screen_gamma, 3); |
| |
| (void)gamma_test(pm, colour_type, bit_depth, 0/*palette*/, interlace_type, |
| file_gamma, screen_gamma, 0/*sBIT*/, 1/*threshold test*/, name, |
| 0 /*no input precision*/, |
| 0 /*no scale16*/, 0 /*no expand16*/, 0 /*no background*/, 0 /*hence*/, |
| 0 /*no background gamma*/); |
| } |
| |
| static void |
| perform_gamma_threshold_tests(png_modifier *pm) |
| { |
| png_byte colour_type = 0; |
| png_byte bit_depth = 0; |
| int palette_number = 0; |
| |
| /* Don't test more than one instance of each palette - it's pointless, in |
| * fact this test is somewhat excessive since libpng doesn't make this |
| * decision based on colour type or bit depth! |
| */ |
| while (next_format(&colour_type, &bit_depth, &palette_number)) |
| if (palette_number == 0) |
| { |
| double test_gamma = 1.0; |
| while (test_gamma >= .4) |
| { |
| /* There's little point testing the interlacing vs non-interlacing, |
| * but this can be set from the command line. |
| */ |
| gamma_threshold_test(pm, colour_type, bit_depth, pm->interlace_type, |
| test_gamma, 1/test_gamma); |
| test_gamma *= .95; |
| } |
| |
| /* And a special test for sRGB */ |
| gamma_threshold_test(pm, colour_type, bit_depth, pm->interlace_type, |
| .45455, 2.2); |
| |
| if (fail(pm)) |
| return; |
| } |
| } |
| |
| static void gamma_transform_test(png_modifier *pm, |
| PNG_CONST png_byte colour_type, PNG_CONST png_byte bit_depth, |
| PNG_CONST int palette_number, |
| PNG_CONST int interlace_type, PNG_CONST double file_gamma, |
| PNG_CONST double screen_gamma, PNG_CONST png_byte sbit, |
| PNG_CONST int use_input_precision, PNG_CONST int scale16) |
| { |
| size_t pos = 0; |
| char name[64]; |
| |
| if (sbit != bit_depth && sbit != 0) |
| { |
| pos = safecat(name, sizeof name, pos, "sbit("); |
| pos = safecatn(name, sizeof name, pos, sbit); |
| pos = safecat(name, sizeof name, pos, ") "); |
| } |
| |
| else |
| pos = safecat(name, sizeof name, pos, "gamma "); |
| |
| if (scale16) |
| pos = safecat(name, sizeof name, pos, "16to8 "); |
| |
| pos = safecatd(name, sizeof name, pos, file_gamma, 3); |
| pos = safecat(name, sizeof name, pos, "->"); |
| pos = safecatd(name, sizeof name, pos, screen_gamma, 3); |
| |
| gamma_test(pm, colour_type, bit_depth, palette_number, interlace_type, |
| file_gamma, screen_gamma, sbit, 0, name, use_input_precision, |
| scale16, pm->test_gamma_expand16, 0 , 0, 0); |
| } |
| |
| static void perform_gamma_transform_tests(png_modifier *pm) |
| { |
| png_byte colour_type = 0; |
| png_byte bit_depth = 0; |
| int palette_number = 0; |
| |
| while (next_format(&colour_type, &bit_depth, &palette_number)) |
| { |
| unsigned int i, j; |
| |
| for (i=0; i<pm->ngamma_tests; ++i) for (j=0; j<pm->ngamma_tests; ++j) |
| if (i != j) |
| { |
| gamma_transform_test(pm, colour_type, bit_depth, palette_number, |
| pm->interlace_type, 1/pm->gammas[i], pm->gammas[j], 0/*sBIT*/, |
| pm->use_input_precision, 0 /*do not scale16*/); |
| |
| if (fail(pm)) |
| return; |
| } |
| } |
| } |
| |
| static void perform_gamma_sbit_tests(png_modifier *pm) |
| { |
| png_byte sbit; |
| |
| /* The only interesting cases are colour and grayscale, alpha is ignored here |
| * for overall speed. Only bit depths where sbit is less than the bit depth |
| * are tested. |
| */ |
| for (sbit=pm->sbitlow; sbit<(1<<READ_BDHI); ++sbit) |
| { |
| png_byte colour_type, bit_depth; |
| int npalette; |
| |
| colour_type = bit_depth = 0; |
| npalette = 0; |
| |
| while (next_format(&colour_type, &bit_depth, &npalette)) |
| if ((colour_type & PNG_COLOR_MASK_ALPHA) == 0 && |
| ((colour_type == 3 && sbit < 8) || |
| (colour_type != 3 && sbit < bit_depth))) |
| { |
| unsigned int i; |
| |
| for (i=0; i<pm->ngamma_tests; ++i) |
| { |
| unsigned int j; |
| |
| for (j=0; j<pm->ngamma_tests; ++j) if (i != j) |
| { |
| gamma_transform_test(pm, colour_type, bit_depth, npalette, |
| pm->interlace_type, 1/pm->gammas[i], pm->gammas[j], |
| sbit, pm->use_input_precision_sbit, 0 /*scale16*/); |
| |
| if (fail(pm)) |
| return; |
| } |
| } |
| } |
| } |
| } |
| |
| /* Note that this requires a 16 bit source image but produces 8 bit output, so |
| * we only need the 16bit write support, but the 16 bit images are only |
| * generated if DO_16BIT is defined. |
| */ |
| #ifdef DO_16BIT |
| static void perform_gamma_scale16_tests(png_modifier *pm) |
| { |
| # ifndef PNG_MAX_GAMMA_8 |
| # define PNG_MAX_GAMMA_8 11 |
| # endif |
| /* Include the alpha cases here. Note that sbit matches the internal value |
| * used by the library - otherwise we will get spurious errors from the |
| * internal sbit style approximation. |
| * |
| * The threshold test is here because otherwise the 16 to 8 conversion will |
| * proceed *without* gamma correction, and the tests above will fail (but not |
| * by much) - this could be fixed, it only appears with the -g option. |
| */ |
| unsigned int i, j; |
| for (i=0; i<pm->ngamma_tests; ++i) |
| { |
| for (j=0; j<pm->ngamma_tests; ++j) |
| { |
| if (i != j && |
| fabs(pm->gammas[j]/pm->gammas[i]-1) >= PNG_GAMMA_THRESHOLD) |
| { |
| gamma_transform_test(pm, 0, 16, 0, pm->interlace_type, |
| 1/pm->gammas[i], pm->gammas[j], PNG_MAX_GAMMA_8, |
| pm->use_input_precision_16to8, 1 /*scale16*/); |
| |
| if (fail(pm)) |
| return; |
| |
| gamma_transform_test(pm, 2, 16, 0, pm->interlace_type, |
| 1/pm->gammas[i], pm->gammas[j], PNG_MAX_GAMMA_8, |
| pm->use_input_precision_16to8, 1 /*scale16*/); |
| |
| if (fail(pm)) |
| return; |
| |
| gamma_transform_test(pm, 4, 16, 0, pm->interlace_type, |
| 1/pm->gammas[i], pm->gammas[j], PNG_MAX_GAMMA_8, |
| pm->use_input_precision_16to8, 1 /*scale16*/); |
| |
| if (fail(pm)) |
| return; |
| |
| gamma_transform_test(pm, 6, 16, 0, pm->interlace_type, |
| 1/pm->gammas[i], pm->gammas[j], PNG_MAX_GAMMA_8, |
| pm->use_input_precision_16to8, 1 /*scale16*/); |
| |
| if (fail(pm)) |
| return; |
| } |
| } |
| } |
| } |
| #endif /* 16 to 8 bit conversion */ |
| |
| #if defined PNG_READ_BACKGROUND_SUPPORTED ||\ |
| defined PNG_READ_ALPHA_MODE_SUPPORTED |
| static void gamma_composition_test(png_modifier *pm, |
| PNG_CONST png_byte colour_type, PNG_CONST png_byte bit_depth, |
| PNG_CONST int palette_number, |
| PNG_CONST int interlace_type, PNG_CONST double file_gamma, |
| PNG_CONST double screen_gamma, |
| PNG_CONST int use_input_precision, PNG_CONST int do_background, |
| PNG_CONST int expand_16) |
| { |
| size_t pos = 0; |
| png_const_charp base; |
| double bg; |
| char name[128]; |
| png_color_16 background; |
| |
| /* Make up a name and get an appropriate background gamma value. */ |
| switch (do_background) |
| { |
| default: |
| base = ""; |
| bg = 4; /* should not be used */ |
| break; |
| case PNG_BACKGROUND_GAMMA_SCREEN: |
| base = " bckg(Screen):"; |
| bg = 1/screen_gamma; |
| break; |
| case PNG_BACKGROUND_GAMMA_FILE: |
| base = " bckg(File):"; |
| bg = file_gamma; |
| break; |
| case PNG_BACKGROUND_GAMMA_UNIQUE: |
| base = " bckg(Unique):"; |
| /* This tests the handling of a unique value, the math is such that the |
| * value tends to be <1, but is neither screen nor file (even if they |
| * match!) |
| */ |
| bg = (file_gamma + screen_gamma) / 3; |
| break; |
| #ifdef PNG_READ_ALPHA_MODE_SUPPORTED |
| case ALPHA_MODE_OFFSET + PNG_ALPHA_PNG: |
| base = " alpha(PNG)"; |
| bg = 4; /* should not be used */ |
| break; |
| case ALPHA_MODE_OFFSET + PNG_ALPHA_STANDARD: |
| base = " alpha(Porter-Duff)"; |
| bg = 4; /* should not be used */ |
| break; |
| case ALPHA_MODE_OFFSET + PNG_ALPHA_OPTIMIZED: |
| base = " alpha(Optimized)"; |
| bg = 4; /* should not be used */ |
| break; |
| case ALPHA_MODE_OFFSET + PNG_ALPHA_BROKEN: |
| base = " alpha(Broken)"; |
| bg = 4; /* should not be used */ |
| break; |
| #endif |
| } |
| |
| /* Use random background values - the background is always presented in the |
| * output space (8 or 16 bit components). |
| */ |
| if (expand_16 || bit_depth == 16) |
| { |
| png_uint_32 r = random_32(); |
| |
| background.red = (png_uint_16)r; |
| background.green = (png_uint_16)(r >> 16); |
| r = random_32(); |
| background.blue = (png_uint_16)r; |
| background.gray = (png_uint_16)(r >> 16); |
| } |
| |
| else /* 8 bit colors */ |
| { |
| png_uint_32 r = random_32(); |
| |
| background.red = (png_byte)r; |
| background.green = (png_byte)(r >> 8); |
| background.blue = (png_byte)(r >> 16); |
| background.gray = (png_byte)(r >> 24); |
| } |
| |
| background.index = 193; /* rgb(193,193,193) to detect errors */ |
| if (!(colour_type & PNG_COLOR_MASK_COLOR)) |
| { |
| /* Grayscale input, we do not convert to RGB (TBD), so we must set the |
| * background to gray - else libpng seems to fail. |
| */ |
| background.red = background.green = background.blue = background.gray; |
| } |
| |
| pos = safecat(name, sizeof name, pos, "gamma "); |
| pos = safecatd(name, sizeof name, pos, file_gamma, 3); |
| pos = safecat(name, sizeof name, pos, "->"); |
| pos = safecatd(name, sizeof name, pos, screen_gamma, 3); |
| |
| pos = safecat(name, sizeof name, pos, base); |
| if (do_background < ALPHA_MODE_OFFSET) |
| { |
| /* Include the background color and gamma in the name: */ |
| pos = safecat(name, sizeof name, pos, "("); |
| /* This assumes no expand gray->rgb - the current code won't handle that! |
| */ |
| if (colour_type & PNG_COLOR_MASK_COLOR) |
| { |
| pos = safecatn(name, sizeof name, pos, background.red); |
| pos = safecat(name, sizeof name, pos, ","); |
| pos = safecatn(name, sizeof name, pos, background.green); |
| pos = safecat(name, sizeof name, pos, ","); |
| pos = safecatn(name, sizeof name, pos, background.blue); |
| } |
| else |
| pos = safecatn(name, sizeof name, pos, background.gray); |
| pos = safecat(name, sizeof name, pos, ")^"); |
| pos = safecatd(name, sizeof name, pos, bg, 3); |
| } |
| |
| gamma_test(pm, colour_type, bit_depth, palette_number, interlace_type, |
| file_gamma, screen_gamma, 0/*sBIT*/, 0, name, use_input_precision, |
| 0/*strip 16*/, expand_16, do_background, &background, bg); |
| } |
| |
| |
| static void |
| perform_gamma_composition_tests(png_modifier *pm, int do_background, |
| int expand_16) |
| { |
| png_byte colour_type = 0; |
| png_byte bit_depth = 0; |
| int palette_number = 0; |
| |
| /* Skip the non-alpha cases - there is no setting of a transparency colour at |
| * present. |
| */ |
| while (next_format(&colour_type, &bit_depth, &palette_number)) |
| if ((colour_type & PNG_COLOR_MASK_ALPHA) != 0) |
| { |
| unsigned int i, j; |
| |
| /* Don't skip the i==j case here - it's relevant. */ |
| for (i=0; i<pm->ngamma_tests; ++i) for (j=0; j<pm->ngamma_tests; ++j) |
| { |
| gamma_composition_test(pm, colour_type, bit_depth, palette_number, |
| pm->interlace_type, 1/pm->gammas[i], pm->gammas[j], |
| pm->use_input_precision, do_background, expand_16); |
| |
| if (fail(pm)) |
| return; |
| } |
| } |
| } |
| #endif /* READ_BACKGROUND || READ_ALPHA_MODE */ |
| |
| static void |
| init_gamma_errors(png_modifier *pm) |
| { |
| pm->error_gray_2 = pm->error_gray_4 = pm->error_gray_8 = 0; |
| pm->error_color_8 = 0; |
| pm->error_indexed = 0; |
| pm->error_gray_16 = pm->error_color_16 = 0; |
| } |
| |
| static void |
| summarize_gamma_errors(png_modifier *pm, png_const_charp who, int low_bit_depth) |
| { |
| if (who) |
| printf("Gamma correction with %s:\n", who); |
| |
| if (low_bit_depth) |
| { |
| printf(" 2 bit gray: %.5f\n", pm->error_gray_2); |
| printf(" 4 bit gray: %.5f\n", pm->error_gray_4); |
| printf(" 8 bit gray: %.5f\n", pm->error_gray_8); |
| printf(" 8 bit color: %.5f\n", pm->error_color_8); |
| printf(" indexed: %.5f\n", pm->error_indexed); |
| } |
| |
| #ifdef DO_16BIT |
| printf(" 16 bit gray: %.5f\n", pm->error_gray_16); |
| printf(" 16 bit color: %.5f\n", pm->error_color_16); |
| #endif |
| } |
| |
| static void |
| perform_gamma_test(png_modifier *pm, int summary) |
| { |
| /*TODO: remove this*/ |
| /* Save certain values for the temporary overrides below. */ |
| unsigned int calculations_use_input_precision = |
| pm->calculations_use_input_precision; |
| double maxout8 = pm->maxout8; |
| |
| /* First some arbitrary no-transform tests: */ |
| if (!pm->this.speed && pm->test_gamma_threshold) |
| { |
| perform_gamma_threshold_tests(pm); |
| |
| if (fail(pm)) |
| return; |
| } |
| |
| /* Now some real transforms. */ |
| if (pm->test_gamma_transform) |
| { |
| init_gamma_errors(pm); |
| /*TODO: remove this. Necessary because the current libpng |
| * implementation works in 8 bits: |
| */ |
| if (pm->test_gamma_expand16) |
| pm->calculations_use_input_precision = 1; |
| perform_gamma_transform_tests(pm); |
| if (!calculations_use_input_precision) |
| pm->calculations_use_input_precision = 0; |
| |
| if (summary) |
| { |
| printf("Gamma correction error summary\n\n"); |
| printf("The printed value is the maximum error in the pixel values\n"); |
| printf("calculated by the libpng gamma correction code. The error\n"); |
| printf("is calculated as the difference between the output pixel\n"); |
| printf("value (always an integer) and the ideal value from the\n"); |
| printf("libpng specification (typically not an integer).\n\n"); |
| |
| printf("Expect this value to be less than .5 for 8 bit formats,\n"); |
| printf("less than 1 for formats with fewer than 8 bits and a small\n"); |
| printf("number (typically less than 5) for the 16 bit formats.\n"); |
| printf("For performance reasons the value for 16 bit formats\n"); |
| printf("increases when the image file includes an sBIT chunk.\n\n"); |
| |
| summarize_gamma_errors(pm, 0/*who*/, 1); |
| } |
| } |
| |
| /* The sbit tests produce much larger errors: */ |
| if (pm->test_gamma_sbit) |
| { |
| init_gamma_errors(pm); |
| perform_gamma_sbit_tests(pm); |
| |
| if (summary) |
| summarize_gamma_errors(pm, "sBIT", pm->sbitlow < 8U); |
| } |
| |
| #ifdef DO_16BIT /* Should be READ_16BIT_SUPPORTED */ |
| if (pm->test_gamma_scale16) |
| { |
| /* The 16 to 8 bit strip operations: */ |
| init_gamma_errors(pm); |
| perform_gamma_scale16_tests(pm); |
| |
| if (summary) |
| { |
| printf("Gamma correction with 16 to 8 bit reduction:\n"); |
| printf(" 16 bit gray: %.5f\n", pm->error_gray_16); |
| printf(" 16 bit color: %.5f\n", pm->error_color_16); |
| } |
| } |
| #endif |
| |
| #ifdef PNG_READ_BACKGROUND_SUPPORTED |
| if (pm->test_gamma_background) |
| { |
| init_gamma_errors(pm); |
| |
| /*TODO: remove this. Necessary because the current libpng |
| * implementation works in 8 bits: |
| */ |
| if (pm->test_gamma_expand16) |
| { |
| pm->calculations_use_input_precision = 1; |
| pm->maxout8 = .499; /* because the 16 bit background is smashed */ |
| } |
| perform_gamma_composition_tests(pm, PNG_BACKGROUND_GAMMA_UNIQUE, |
| pm->test_gamma_expand16); |
| if (!calculations_use_input_precision) |
| pm->calculations_use_input_precision = 0; |
| pm->maxout8 = maxout8; |
| |
| if (summary) |
| summarize_gamma_errors(pm, "background", 1); |
| } |
| #endif |
| |
| #ifdef PNG_READ_ALPHA_MODE_SUPPORTED |
| if (pm->test_gamma_alpha_mode) |
| { |
| int do_background; |
| |
| init_gamma_errors(pm); |
| |
| /*TODO: remove this. Necessary because the current libpng |
| * implementation works in 8 bits: |
| */ |
| if (pm->test_gamma_expand16) |
| pm->calculations_use_input_precision = 1; |
| for (do_background = ALPHA_MODE_OFFSET + PNG_ALPHA_STANDARD; |
| do_background <= ALPHA_MODE_OFFSET + PNG_ALPHA_BROKEN && !fail(pm); |
| ++do_background) |
| perform_gamma_composition_tests(pm, do_background, |
| pm->test_gamma_expand16); |
| if (!calculations_use_input_precision) |
| pm->calculations_use_input_precision = 0; |
| |
| if (summary) |
| summarize_gamma_errors(pm, "alpha mode", 1); |
| } |
| #endif |
| } |
| #endif /* PNG_READ_GAMMA_SUPPORTED */ |
| |
| /* INTERLACE MACRO VALIDATION */ |
| /* This is copied verbatim from the specification, it is simply the pass |
| * number in which each pixel in each 8x8 tile appears. The array must |
| * be indexed adam7[y][x] and notice that the pass numbers are based at |
| * 1, not 0 - the base libpng uses. |
| */ |
| static PNG_CONST |
| png_byte adam7[8][8] = |
| { |
| { 1,6,4,6,2,6,4,6 }, |
| { 7,7,7,7,7,7,7,7 }, |
| { 5,6,5,6,5,6,5,6 }, |
| { 7,7,7,7,7,7,7,7 }, |
| { 3,6,4,6,3,6,4,6 }, |
| { 7,7,7,7,7,7,7,7 }, |
| { 5,6,5,6,5,6,5,6 }, |
| { 7,7,7,7,7,7,7,7 } |
| }; |
| |
| /* This routine validates all the interlace support macros in png.h for |
| * a variety of valid PNG widths and heights. It uses a number of similarly |
| * named internal routines that feed off the above array. |
| */ |
| static png_uint_32 |
| png_pass_start_row(int pass) |
| { |
| int x, y; |
| ++pass; |
| for (y=0; y<8; ++y) for (x=0; x<8; ++x) if (adam7[y][x] == pass) |
| return y; |
| return 0xf; |
| } |
| |
| static png_uint_32 |
| png_pass_start_col(int pass) |
| { |
| int x, y; |
| ++pass; |
| for (x=0; x<8; ++x) for (y=0; y<8; ++y) if (adam7[y][x] == pass) |
| return x; |
| return 0xf; |
| } |
| |
| static int |
| png_pass_row_shift(int pass) |
| { |
| int x, y, base=(-1), inc=8; |
| ++pass; |
| for (y=0; y<8; ++y) for (x=0; x<8; ++x) if (adam7[y][x] == pass) |
| { |
| if (base == (-1)) |
| base = y; |
| else if (base == y) |
| {} |
| else if (inc == y-base) |
| base=y; |
| else if (inc == 8) |
| inc = y-base, base=y; |
| else if (inc != y-base) |
| return 0xff; /* error - more than one 'inc' value! */ |
| } |
| |
| if (base == (-1)) return 0xfe; /* error - no row in pass! */ |
| |
| /* The shift is always 1, 2 or 3 - no pass has all the rows! */ |
| switch (inc) |
| { |
| case 2: return 1; |
| case 4: return 2; |
| case 8: return 3; |
| default: break; |
| } |
| |
| /* error - unrecognized 'inc' */ |
| return (inc << 8) + 0xfd; |
| } |
| |
| static int |
| png_pass_col_shift(int pass) |
| { |
| int x, y, base=(-1), inc=8; |
| ++pass; |
| for (x=0; x<8; ++x) for (y=0; y<8; ++y) if (adam7[y][x] == pass) |
| { |
| if (base == (-1)) |
| base = x; |
| else if (base == x) |
| {} |
| else if (inc == x-base) |
| base=x; |
| else if (inc == 8) |
| inc = x-base, base=x; |
| else if (inc != x-base) |
| return 0xff; /* error - more than one 'inc' value! */ |
| } |
| |
| if (base == (-1)) return 0xfe; /* error - no row in pass! */ |
| |
| /* The shift is always 1, 2 or 3 - no pass has all the rows! */ |
| switch (inc) |
| { |
| case 1: return 0; /* pass 7 has all the columns */ |
| case 2: return 1; |
| case 4: return 2; |
| case 8: return 3; |
| default: break; |
| } |
| |
| /* error - unrecognized 'inc' */ |
| return (inc << 8) + 0xfd; |
| } |
| |
| static png_uint_32 |
| png_row_from_pass_row(png_uint_32 yIn, int pass) |
| { |
| /* By examination of the array: */ |
| switch (pass) |
| { |
| case 0: return yIn * 8; |
| case 1: return yIn * 8; |
| case 2: return yIn * 8 + 4; |
| case 3: return yIn * 4; |
| case 4: return yIn * 4 + 2; |
| case 5: return yIn * 2; |
| case 6: return yIn * 2 + 1; |
| default: break; |
| } |
| |
| return 0xff; /* bad pass number */ |
| } |
| |
| static png_uint_32 |
| png_col_from_pass_col(png_uint_32 xIn, int pass) |
| { |
| /* By examination of the array: */ |
| switch (pass) |
| { |
| case 0: return xIn * 8; |
| case 1: return xIn * 8 + 4; |
| case 2: return xIn * 4; |
| case 3: return xIn * 4 + 2; |
| case 4: return xIn * 2; |
| case 5: return xIn * 2 + 1; |
| case 6: return xIn; |
| default: break; |
| } |
| |
| return 0xff; /* bad pass number */ |
| } |
| |
| static int |
| png_row_in_interlace_pass(png_uint_32 y, int pass) |
| { |
| /* Is row 'y' in pass 'pass'? */ |
| int x; |
| y &= 7; |
| ++pass; |
| for (x=0; x<8; ++x) if (adam7[y][x] == pass) |
| return 1; |
| |
| return 0; |
| } |
| |
| static int |
| png_col_in_interlace_pass(png_uint_32 x, int pass) |
| { |
| /* Is column 'x' in pass 'pass'? */ |
| int y; |
| x &= 7; |
| ++pass; |
| for (y=0; y<8; ++y) if (adam7[y][x] == pass) |
| return 1; |
| |
| return 0; |
| } |
| |
| static png_uint_32 |
| png_pass_rows(png_uint_32 height, int pass) |
| { |
| png_uint_32 tiles = height>>3; |
| png_uint_32 rows = 0; |
| unsigned int x, y; |
| |
| height &= 7; |
| ++pass; |
| for (y=0; y<8; ++y) for (x=0; x<8; ++x) if (adam7[y][x] == pass) |
| { |
| rows += tiles; |
| if (y < height) ++rows; |
| break; /* i.e. break the 'x', column, loop. */ |
| } |
| |
| return rows; |
| } |
| |
| static png_uint_32 |
| png_pass_cols(png_uint_32 width, int pass) |
| { |
| png_uint_32 tiles = width>>3; |
| png_uint_32 cols = 0; |
| unsigned int x, y; |
| |
| width &= 7; |
| ++pass; |
| for (x=0; x<8; ++x) for (y=0; y<8; ++y) if (adam7[y][x] == pass) |
| { |
| cols += tiles; |
| if (x < width) ++cols; |
| break; /* i.e. break the 'y', row, loop. */ |
| } |
| |
| return cols; |
| } |
| |
| static void |
| perform_interlace_macro_validation(void) |
| { |
| /* The macros to validate, first those that depend only on pass: |
| * |
| * PNG_PASS_START_ROW(pass) |
| * PNG_PASS_START_COL(pass) |
| * PNG_PASS_ROW_SHIFT(pass) |
| * PNG_PASS_COL_SHIFT(pass) |
| */ |
| int pass; |
| |
| for (pass=0; pass<7; ++pass) |
| { |
| png_uint_32 m, f, v; |
| |
| m = PNG_PASS_START_ROW(pass); |
| f = png_pass_start_row(pass); |
| if (m != f) |
| { |
| fprintf(stderr, "PNG_PASS_START_ROW(%d) = %u != %x\n", pass, m, f); |
| exit(1); |
| } |
| |
| m = PNG_PASS_START_COL(pass); |
| f = png_pass_start_col(pass); |
| if (m != f) |
| { |
| fprintf(stderr, "PNG_PASS_START_COL(%d) = %u != %x\n", pass, m, f); |
| exit(1); |
| } |
| |
| m = PNG_PASS_ROW_SHIFT(pass); |
| f = png_pass_row_shift(pass); |
| if (m != f) |
| { |
| fprintf(stderr, "PNG_PASS_ROW_SHIFT(%d) = %u != %x\n", pass, m, f); |
| exit(1); |
| } |
| |
| m = PNG_PASS_COL_SHIFT(pass); |
| f = png_pass_col_shift(pass); |
| if (m != f) |
| { |
| fprintf(stderr, "PNG_PASS_COL_SHIFT(%d) = %u != %x\n", pass, m, f); |
| exit(1); |
| } |
| |
| /* Macros that depend on the image or sub-image height too: |
| * |
| * PNG_PASS_ROWS(height, pass) |
| * PNG_PASS_COLS(width, pass) |
| * PNG_ROW_FROM_PASS_ROW(yIn, pass) |
| * PNG_COL_FROM_PASS_COL(xIn, pass) |
| * PNG_ROW_IN_INTERLACE_PASS(y, pass) |
| * PNG_COL_IN_INTERLACE_PASS(x, pass) |
| */ |
| for (v=0;;) |
| { |
| /* First the base 0 stuff: */ |
| m = PNG_ROW_FROM_PASS_ROW(v, pass); |
| f = png_row_from_pass_row(v, pass); |
| if (m != f) |
| { |
| fprintf(stderr, "PNG_ROW_FROM_PASS_ROW(%u, %d) = %u != %x\n", |
| v, pass, m, f); |
| exit(1); |
| } |
| |
| m = PNG_COL_FROM_PASS_COL(v, pass); |
| f = png_col_from_pass_col(v, pass); |
| if (m != f) |
| { |
| fprintf(stderr, "PNG_COL_FROM_PASS_COL(%u, %d) = %u != %x\n", |
| v, pass, m, f); |
| exit(1); |
| } |
| |
| m = PNG_ROW_IN_INTERLACE_PASS(v, pass); |
| f = png_row_in_interlace_pass(v, pass); |
| if (m != f) |
| { |
| fprintf(stderr, "PNG_ROW_IN_INTERLACE_PASS(%u, %d) = %u != %x\n", |
| v, pass, m, f); |
| exit(1); |
| } |
| |
| m = PNG_COL_IN_INTERLACE_PASS(v, pass); |
| f = png_col_in_interlace_pass(v, pass); |
| if (m != f) |
| { |
| fprintf(stderr, "PNG_COL_IN_INTERLACE_PASS(%u, %d) = %u != %x\n", |
| v, pass, m, f); |
| exit(1); |
| } |
| |
| /* Then the base 1 stuff: */ |
| ++v; |
| m = PNG_PASS_ROWS(v, pass); |
| f = png_pass_rows(v, pass); |
| if (m != f) |
| { |
| fprintf(stderr, "PNG_PASS_ROWS(%u, %d) = %u != %x\n", |
| v, pass, m, f); |
| exit(1); |
| } |
| |
| m = PNG_PASS_COLS(v, pass); |
| f = png_pass_cols(v, pass); |
| if (m != f) |
| { |
| fprintf(stderr, "PNG_PASS_COLS(%u, %d) = %u != %x\n", |
| v, pass, m, f); |
| exit(1); |
| } |
| |
| /* Move to the next v - the stepping algorithm starts skipping |
| * values above 1024. |
| */ |
| if (v > 1024) |
| { |
| if (v == PNG_UINT_31_MAX) |
| break; |
| |
| v = (v << 1) ^ v; |
| if (v >= PNG_UINT_31_MAX) |
| v = PNG_UINT_31_MAX-1; |
| } |
| } |
| } |
| } |
| |
| /* Test color encodings. These values are back-calculated from the published |
| * chromaticities. The values are accurate to about 14 decimal places; 15 are |
| * given. These values are much more accurate than the ones given in the spec, |
| * which typically don't exceed 4 decimal places. This allows testing of the |
| * libpng code to its theoretical accuracy of 4 decimal places. (If pngvalid |
| * used the published errors the 'slack' permitted would have to be +/-.5E-4 or |
| * more.) |
| * |
| * The png_modifier code assumes that encodings[0] is sRGB and treats it |
| * specially: do not change the first entry in this list! |
| */ |
| static PNG_CONST color_encoding test_encodings[] = |
| { |
| /* sRGB: must be first in this list! */ |
| /*gamma:*/ { 1/2.2, |
| /*red: */ { 0.412390799265959, 0.212639005871510, 0.019330818715592 }, |
| /*green:*/ { 0.357584339383878, 0.715168678767756, 0.119194779794626 }, |
| /*blue: */ { 0.180480788401834, 0.072192315360734, 0.950532152249660} }, |
| /* Kodak ProPhoto (wide gamut) */ |
| /*gamma:*/ { 1/1.6 /*approximate: uses 1.8 power law compared to sRGB 2.4*/, |
| /*red: */ { 0.797760489672303, 0.288071128229293, 0.000000000000000 }, |
| /*green:*/ { 0.135185837175740, 0.711843217810102, 0.000000000000000 }, |
| /*blue: */ { 0.031349349581525, 0.000085653960605, 0.825104602510460} }, |
| /* Adobe RGB (1998) */ |
| /*gamma:*/ { 1/(2+51./256), |
| /*red: */ { 0.576669042910131, 0.297344975250536, 0.027031361386412 }, |
| /*green:*/ { 0.185558237906546, 0.627363566255466, 0.070688852535827 }, |
| /*blue: */ { 0.188228646234995, 0.075291458493998, 0.991337536837639} }, |
| /* Adobe Wide Gamut RGB */ |
| /*gamma:*/ { 1/(2+51./256), |
| /*red: */ { 0.716500716779386, 0.258728243040113, 0.000000000000000 }, |
| /*green:*/ { 0.101020574397477, 0.724682314948566, 0.051211818965388 }, |
| /*blue: */ { 0.146774385252705, 0.016589442011321, 0.773892783545073} }, |
| }; |
| |
| /* signal handler |
| * |
| * This attempts to trap signals and escape without crashing. It needs a |
| * context pointer so that it can throw an exception (call longjmp) to recover |
| * from the condition; this is handled by making the png_modifier used by 'main' |
| * into a global variable. |
| */ |
| static png_modifier pm; |
| |
| static void signal_handler(int signum) |
| { |
| |
| size_t pos = 0; |
| char msg[64]; |
| |
| pos = safecat(msg, sizeof msg, pos, "caught signal: "); |
| |
| switch (signum) |
| { |
| case SIGABRT: |
| pos = safecat(msg, sizeof msg, pos, "abort"); |
| break; |
| |
| case SIGFPE: |
| pos = safecat(msg, sizeof msg, pos, "floating point exception"); |
| break; |
| |
| case SIGILL: |
| pos = safecat(msg, sizeof msg, pos, "illegal instruction"); |
| break; |
| |
| case SIGINT: |
| pos = safecat(msg, sizeof msg, pos, "interrupt"); |
| break; |
| |
| case SIGSEGV: |
| pos = safecat(msg, sizeof msg, pos, "invalid memory access"); |
| break; |
| |
| case SIGTERM: |
| pos = safecat(msg, sizeof msg, pos, "termination request"); |
| break; |
| |
| default: |
| pos = safecat(msg, sizeof msg, pos, "unknown "); |
| pos = safecatn(msg, sizeof msg, pos, signum); |
| break; |
| } |
| |
| store_log(&pm.this, NULL/*png_structp*/, msg, 1/*error*/); |
| |
| /* And finally throw an exception so we can keep going, unless this is |
| * SIGTERM in which case stop now. |
| */ |
| if (signum != SIGTERM) |
| { |
| struct exception_context *the_exception_context = |
| &pm.this.exception_context; |
| |
| Throw &pm.this; |
| } |
| |
| else |
| exit(1); |
| } |
| |
| /* main program */ |
| int main(int argc, PNG_CONST char **argv) |
| { |
| volatile int summary = 1; /* Print the error summary at the end */ |
| volatile int memstats = 0; /* Print memory statistics at the end */ |
| |
| /* Create the given output file on success: */ |
| PNG_CONST char *volatile touch = NULL; |
| |
| /* This is an array of standard gamma values (believe it or not I've seen |
| * every one of these mentioned somewhere.) |
| * |
| * In the following list the most useful values are first! |
| */ |
| static double |
| gammas[]={2.2, 1.0, 2.2/1.45, 1.8, 1.5, 2.4, 2.5, 2.62, 2.9}; |
| |
| /* This records the command and arguments: */ |
| size_t cp = 0; |
| char command[1024]; |
| |
| anon_context(&pm.this); |
| |
| /* Add appropriate signal handlers, just the ANSI specified ones: */ |
| signal(SIGABRT, signal_handler); |
| signal(SIGFPE, signal_handler); |
| signal(SIGILL, signal_handler); |
| signal(SIGINT, signal_handler); |
| signal(SIGSEGV, signal_handler); |
| signal(SIGTERM, signal_handler); |
| |
| #ifdef HAVE_FEENABLEEXCEPT |
| /* Only required to enable FP exceptions on platforms where they start off |
| * disabled; this is not necessary but if it is not done pngvalid will likely |
| * end up ignoring FP conditions that other platforms fault. |
| */ |
| feenableexcept(FE_DIVBYZERO | FE_INVALID | FE_OVERFLOW); |
| #endif |
| |
| modifier_init(&pm); |
| |
| /* Preallocate the image buffer, because we know how big it needs to be, |
| * note that, for testing purposes, it is deliberately mis-aligned by tag |
| * bytes either side. All rows have an additional five bytes of padding for |
| * overwrite checking. |
| */ |
| store_ensure_image(&pm.this, NULL, 2, TRANSFORM_ROWMAX, TRANSFORM_HEIGHTMAX); |
| |
| /* Don't give argv[0], it's normally some horrible libtool string: */ |
| cp = safecat(command, sizeof command, cp, "pngvalid"); |
| |
| /* Default to error on warning: */ |
| pm.this.treat_warnings_as_errors = 1; |
| |
| /* Store the test gammas */ |
| pm.gammas = gammas; |
| pm.ngammas = (sizeof gammas) / (sizeof gammas[0]); |
| pm.ngamma_tests = 0; /* default to off */ |
| |
| /* And the test encodings */ |
| pm.encodings = test_encodings; |
| pm.nencodings = (sizeof test_encodings) / (sizeof test_encodings[0]); |
| |
| pm.sbitlow = 8U; /* because libpng doesn't do sBIT below 8! */ |
| /* The following allows results to pass if they correspond to anything in the |
| * transformed range [input-.5,input+.5]; this is is required because of the |
| * way libpng treates the 16_TO_8 flag when building the gamma tables. |
| * |
| * TODO: review this |
| */ |
| pm.use_input_precision_16to8 = 1U; |
| |
| /* Some default values (set the behavior for 'make check' here). |
| * These values simply control the maximum error permitted in the gamma |
| * transformations. The practial limits for human perception are described |
| * below (the setting for maxpc16), however for 8 bit encodings it isn't |
| * possible to meet the accepted capabilities of human vision - i.e. 8 bit |
| * images can never be good enough, regardless of encoding. |
| */ |
| pm.maxout8 = .1; /* Arithmetic error in *encoded* value */ |
| pm.maxabs8 = .00005; /* 1/20000 */ |
| pm.maxcalc8 = .004; /* +/-1 in 8 bits for compose errors */ |
| pm.maxpc8 = .499; /* I.e., .499% fractional error */ |
| pm.maxout16 = .499; /* Error in *encoded* value */ |
| pm.maxabs16 = .00005;/* 1/20000 */ |
| pm.maxcalc16 =.000015;/* +/-1 in 16 bits for compose errors */ |
| |
| /* NOTE: this is a reasonable perceptual limit. We assume that humans can |
| * perceive light level differences of 1% over a 100:1 range, so we need to |
| * maintain 1 in 10000 accuracy (in linear light space), which is what the |
| * following guarantees. It also allows significantly higher errors at |
| * higher 16 bit values, which is important for performance. The actual |
| * maximum 16 bit error is about +/-1.9 in the fixed point implementation but |
| * this is only allowed for values >38149 by the following: |
| */ |
| pm.maxpc16 = .005; /* I.e., 1/200% - 1/20000 */ |
| |
| /* Now parse the command line options. */ |
| while (--argc >= 1) |
| { |
| int catmore = 0; /* Set if the argument has an argument. */ |
| |
| /* Record each argument for posterity: */ |
| cp = safecat(command, sizeof command, cp, " "); |
| cp = safecat(command, sizeof command, cp, *++argv); |
| |
| if (strcmp(*argv, "-v") == 0) |
| pm.this.verbose = 1; |
| |
| else if (strcmp(*argv, "-l") == 0) |
| pm.log = 1; |
| |
| else if (strcmp(*argv, "-q") == 0) |
| summary = pm.this.verbose = pm.log = 0; |
| |
| else if (strcmp(*argv, "-w") == 0) |
| pm.this.treat_warnings_as_errors = 0; |
| |
| else if (strcmp(*argv, "--speed") == 0) |
| pm.this.speed = 1, pm.ngamma_tests = pm.ngammas, pm.test_standard = 0, |
| summary = 0; |
| |
| else if (strcmp(*argv, "--memory") == 0) |
| memstats = 1; |
| |
| else if (strcmp(*argv, "--size") == 0) |
| pm.test_size = 1; |
| |
| else if (strcmp(*argv, "--nosize") == 0) |
| pm.test_size = 0; |
| |
| else if (strcmp(*argv, "--standard") == 0) |
| pm.test_standard = 1; |
| |
| else if (strcmp(*argv, "--nostandard") == 0) |
| pm.test_standard = 0; |
| |
| else if (strcmp(*argv, "--transform") == 0) |
| pm.test_transform = 1; |
| |
| else if (strcmp(*argv, "--notransform") == 0) |
| pm.test_transform = 0; |
| |
| #ifdef PNG_READ_TRANSFORMS_SUPPORTED |
| else if (strncmp(*argv, "--transform-disable=", |
| sizeof "--transform-disable") == 0) |
| { |
| pm.test_transform = 1; |
| transform_disable(*argv + sizeof "--transform-disable"); |
| } |
| |
| else if (strncmp(*argv, "--transform-enable=", |
| sizeof "--transform-enable") == 0) |
| { |
| pm.test_transform = 1; |
| transform_enable(*argv + sizeof "--transform-enable"); |
| } |
| #endif /* PNG_READ_TRANSFORMS_SUPPORTED */ |
| |
| else if (strcmp(*argv, "--gamma") == 0) |
| { |
| /* Just do two gamma tests here (2.2 and linear) for speed: */ |
| pm.ngamma_tests = 2U; |
| pm.test_gamma_threshold = 1; |
| pm.test_gamma_transform = 1; |
| pm.test_gamma_sbit = 1; |
| pm.test_gamma_scale16 = 1; |
| pm.test_gamma_background = 1; |
| pm.test_gamma_alpha_mode = 1; |
| } |
| |
| else if (strcmp(*argv, "--nogamma") == 0) |
| pm.ngamma_tests = 0; |
| |
| else if (strcmp(*argv, "--gamma-threshold") == 0) |
| pm.ngamma_tests = 2U, pm.test_gamma_threshold = 1; |
| |
| else if (strcmp(*argv, "--nogamma-threshold") == 0) |
| pm.test_gamma_threshold = 0; |
| |
| else if (strcmp(*argv, "--gamma-transform") == 0) |
| pm.ngamma_tests = 2U, pm.test_gamma_transform = 1; |
| |
| else if (strcmp(*argv, "--nogamma-transform") == 0) |
| pm.test_gamma_transform = 0; |
| |
| else if (strcmp(*argv, "--gamma-sbit") == 0) |
| pm.ngamma_tests = 2U, pm.test_gamma_sbit = 1; |
| |
| else if (strcmp(*argv, "--nogamma-sbit") == 0) |
| pm.test_gamma_sbit = 0; |
| |
| else if (strcmp(*argv, "--gamma-16-to-8") == 0) |
| pm.ngamma_tests = 2U, pm.test_gamma_scale16 = 1; |
| |
| else if (strcmp(*argv, "--nogamma-16-to-8") == 0) |
| pm.test_gamma_scale16 = 0; |
| |
| else if (strcmp(*argv, "--gamma-background") == 0) |
| pm.ngamma_tests = 2U, pm.test_gamma_background = 1; |
| |
| else if (strcmp(*argv, "--nogamma-background") == 0) |
| pm.test_gamma_background = 0; |
| |
| else if (strcmp(*argv, "--gamma-alpha-mode") == 0) |
| pm.ngamma_tests = 2U, pm.test_gamma_alpha_mode = 1; |
| |
| else if (strcmp(*argv, "--nogamma-alpha-mode") == 0) |
| pm.test_gamma_alpha_mode = 0; |
| |
| else if (strcmp(*argv, "--expand16") == 0) |
| pm.test_gamma_expand16 = 1; |
| |
| else if (strcmp(*argv, "--noexpand16") == 0) |
| pm.test_gamma_expand16 = 0; |
| |
| else if (strcmp(*argv, "--more-gammas") == 0) |
| pm.ngamma_tests = 3U; |
| |
| else if (strcmp(*argv, "--all-gammas") == 0) |
| pm.ngamma_tests = pm.ngammas; |
| |
| else if (strcmp(*argv, "--progressive-read") == 0) |
| pm.this.progressive = 1; |
| |
| else if (strcmp(*argv, "--use-update-info") == 0) |
| ++pm.use_update_info; /* Can call multiple times */ |
| |
| else if (strcmp(*argv, "--interlace") == 0) |
| pm.interlace_type = PNG_INTERLACE_ADAM7; |
| |
| else if (strcmp(*argv, "--use-input-precision") == 0) |
| pm.use_input_precision = 1; |
| |
| else if (strcmp(*argv, "--calculations-use-input-precision") == 0) |
| pm.calculations_use_input_precision = 1; |
| |
| else if (strcmp(*argv, "--assume-16-bit-calculations") == 0) |
| pm.assume_16_bit_calculations = 1; |
| |
| else if (strcmp(*argv, "--calculations-follow-bit-depth") == 0) |
| pm.calculations_use_input_precision = |
| pm.assume_16_bit_calculations = 0; |
| |
| else if (strcmp(*argv, "--exhaustive") == 0) |
| pm.test_exhaustive = 1; |
| |
| else if (argc > 1 && strcmp(*argv, "--sbitlow") == 0) |
| --argc, pm.sbitlow = (png_byte)atoi(*++argv), catmore = 1; |
| |
| else if (argc > 1 && strcmp(*argv, "--touch") == 0) |
| --argc, touch = *++argv, catmore = 1; |
| |
| else if (argc > 1 && strncmp(*argv, "--max", 5) == 0) |
| { |
| --argc; |
| |
| if (strcmp(5+*argv, "abs8") == 0) |
| pm.maxabs8 = atof(*++argv); |
| |
| else if (strcmp(5+*argv, "abs16") == 0) |
| pm.maxabs16 = atof(*++argv); |
| |
| else if (strcmp(5+*argv, "calc8") == 0) |
| pm.maxcalc8 = atof(*++argv); |
| |
| else if (strcmp(5+*argv, "calc16") == 0) |
| pm.maxcalc16 = atof(*++argv); |
| |
| else if (strcmp(5+*argv, "out8") == 0) |
| pm.maxout8 = atof(*++argv); |
| |
| else if (strcmp(5+*argv, "out16") == 0) |
| pm.maxout16 = atof(*++argv); |
| |
| else if (strcmp(5+*argv, "pc8") == 0) |
| pm.maxpc8 = atof(*++argv); |
| |
| else if (strcmp(5+*argv, "pc16") == 0) |
| pm.maxpc16 = atof(*++argv); |
| |
| else |
| { |
| fprintf(stderr, "pngvalid: %s: unknown 'max' option\n", *argv); |
| exit(1); |
| } |
| |
| catmore = 1; |
| } |
| |
| else if (strcmp(*argv, "--log8") == 0) |
| --argc, pm.log8 = atof(*++argv), catmore = 1; |
| |
| else if (strcmp(*argv, "--log16") == 0) |
| --argc, pm.log16 = atof(*++argv), catmore = 1; |
| |
| else |
| { |
| fprintf(stderr, "pngvalid: %s: unknown argument\n", *argv); |
| exit(1); |
| } |
| |
| if (catmore) /* consumed an extra *argv */ |
| { |
| cp = safecat(command, sizeof command, cp, " "); |
| cp = safecat(command, sizeof command, cp, *argv); |
| } |
| } |
| |
| /* If pngvalid is run with no arguments default to a reasonable set of the |
| * tests. |
| */ |
| if (pm.test_standard == 0 && pm.test_size == 0 && pm.test_transform == 0 && |
| pm.ngamma_tests == 0) |
| { |
| /* Make this do all the tests done in the test shell scripts with the same |
| * parameters, where possible. The limitation is that all the progressive |
| * read and interlace stuff has to be done in separate runs, so only the |
| * basic 'standard' and 'size' tests are done. |
| */ |
| pm.test_standard = 1; |
| pm.test_size = 1; |
| pm.test_transform = 1; |
| pm.ngamma_tests = 2U; |
| } |
| |
| if (pm.ngamma_tests > 0 && |
| pm.test_gamma_threshold == 0 && pm.test_gamma_transform == 0 && |
| pm.test_gamma_sbit == 0 && pm.test_gamma_scale16 == 0 && |
| pm.test_gamma_background == 0 && pm.test_gamma_alpha_mode == 0) |
| { |
| pm.test_gamma_threshold = 1; |
| pm.test_gamma_transform = 1; |
| pm.test_gamma_sbit = 1; |
| pm.test_gamma_scale16 = 1; |
| pm.test_gamma_background = 1; |
| pm.test_gamma_alpha_mode = 1; |
| } |
| |
| else if (pm.ngamma_tests == 0) |
| { |
| /* Nothing to test so turn everything off: */ |
| pm.test_gamma_threshold = 0; |
| pm.test_gamma_transform = 0; |
| pm.test_gamma_sbit = 0; |
| pm.test_gamma_scale16 = 0; |
| pm.test_gamma_background = 0; |
| pm.test_gamma_alpha_mode = 0; |
| } |
| |
| Try |
| { |
| /* Make useful base images */ |
| make_transform_images(&pm.this); |
| |
| /* Perform the standard and gamma tests. */ |
| if (pm.test_standard) |
| { |
| perform_interlace_macro_validation(); |
| perform_formatting_test(&pm.this); |
| perform_standard_test(&pm); |
| perform_error_test(&pm); |
| } |
| |
| /* Various oddly sized images: */ |
| if (pm.test_size) |
| { |
| make_size_images(&pm.this); |
| perform_size_test(&pm); |
| } |
| |
| #ifdef PNG_READ_TRANSFORMS_SUPPORTED |
| /* Combinatorial transforms: */ |
| if (pm.test_transform) |
| perform_transform_test(&pm); |
| #endif /* PNG_READ_TRANSFORMS_SUPPORTED */ |
| |
| #ifdef PNG_READ_GAMMA_SUPPORTED |
| if (pm.ngamma_tests > 0) |
| perform_gamma_test(&pm, summary); |
| #endif |
| } |
| |
| Catch_anonymous |
| { |
| fprintf(stderr, "pngvalid: test aborted (probably failed in cleanup)\n"); |
| if (!pm.this.verbose) |
| { |
| if (pm.this.error[0] != 0) |
| fprintf(stderr, "pngvalid: first error: %s\n", pm.this.error); |
| |
| fprintf(stderr, "pngvalid: run with -v to see what happened\n"); |
| } |
| exit(1); |
| } |
| |
| if (summary) |
| { |
| printf("%s: %s (%s point arithmetic)\n", |
| (pm.this.nerrors || (pm.this.treat_warnings_as_errors && |
| pm.this.nwarnings)) ? "FAIL" : "PASS", |
| command, |
| #if defined(PNG_FLOATING_ARITHMETIC_SUPPORTED) || PNG_LIBPNG_VER < 10500 |
| "floating" |
| #else |
| "fixed" |
| #endif |
| ); |
| } |
| |
| if (memstats) |
| { |
| printf("Allocated memory statistics (in bytes):\n" |
| "\tread %lu maximum single, %lu peak, %lu total\n" |
| "\twrite %lu maximum single, %lu peak, %lu total\n", |
| (unsigned long)pm.this.read_memory_pool.max_max, |
| (unsigned long)pm.this.read_memory_pool.max_limit, |
| (unsigned long)pm.this.read_memory_pool.max_total, |
| (unsigned long)pm.this.write_memory_pool.max_max, |
| (unsigned long)pm.this.write_memory_pool.max_limit, |
| (unsigned long)pm.this.write_memory_pool.max_total); |
| } |
| |
| /* Do this here to provoke memory corruption errors in memory not directly |
| * allocated by libpng - not a complete test, but better than nothing. |
| */ |
| store_delete(&pm.this); |
| |
| /* Error exit if there are any errors, and maybe if there are any |
| * warnings. |
| */ |
| if (pm.this.nerrors || (pm.this.treat_warnings_as_errors && |
| pm.this.nwarnings)) |
| { |
| if (!pm.this.verbose) |
| fprintf(stderr, "pngvalid: %s\n", pm.this.error); |
| |
| fprintf(stderr, "pngvalid: %d errors, %d warnings\n", pm.this.nerrors, |
| pm.this.nwarnings); |
| |
| exit(1); |
| } |
| |
| /* Success case. */ |
| if (touch != NULL) |
| { |
| FILE *fsuccess = fopen(touch, "wt"); |
| |
| if (fsuccess != NULL) |
| { |
| int error = 0; |
| fprintf(fsuccess, "PNG validation succeeded\n"); |
| fflush(fsuccess); |
| error = ferror(fsuccess); |
| |
| if (fclose(fsuccess) || error) |
| { |
| fprintf(stderr, "%s: write failed\n", touch); |
| exit(1); |
| } |
| } |
| } |
| |
| return 0; |
| } |