| /* |
| * rtpw.c |
| * |
| * rtp word sender/receiver |
| * |
| * David A. McGrew |
| * Cisco Systems, Inc. |
| * |
| * This app is a simple RTP application intended only for testing |
| * libsrtp. It reads one word at a time from /usr/dict/words (or |
| * whatever file is specified as DICT_FILE), and sends one word out |
| * each USEC_RATE microseconds. Secure RTP protections can be |
| * applied. See the usage() function for more details. |
| * |
| */ |
| |
| /* |
| * |
| * Copyright (c) 2001-2006, Cisco Systems, Inc. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * |
| * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * |
| * Redistributions in binary form must reproduce the above |
| * copyright notice, this list of conditions and the following |
| * disclaimer in the documentation and/or other materials provided |
| * with the distribution. |
| * |
| * Neither the name of the Cisco Systems, Inc. nor the names of its |
| * contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS |
| * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE |
| * COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, |
| * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES |
| * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR |
| * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, |
| * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED |
| * OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| */ |
| |
| |
| #include "datatypes.h" |
| #include "getopt_s.h" /* for local getopt() */ |
| |
| #include <stdio.h> /* for printf, fprintf */ |
| #include <stdlib.h> /* for atoi() */ |
| #include <errno.h> |
| #include <signal.h> /* for signal() */ |
| |
| #include <string.h> /* for strncpy() */ |
| #include <time.h> /* for usleep() */ |
| |
| #ifdef HAVE_UNISTD_H |
| #include <unistd.h> /* for close() */ |
| #endif |
| #ifdef HAVE_SYS_SOCKET_H |
| # include <sys/socket.h> |
| #endif |
| #ifdef HAVE_NETINET_IN_H |
| # include <netinet/in.h> |
| #elif defined HAVE_WINSOCK2_H |
| # include <winsock2.h> |
| # include <ws2tcpip.h> |
| # define RTPW_USE_WINSOCK2 1 |
| #endif |
| #ifdef HAVE_ARPA_INET_H |
| # include <arpa/inet.h> |
| #endif |
| |
| #include "srtp.h" |
| #include "rtp.h" |
| |
| #ifdef RTPW_USE_WINSOCK2 |
| # define DICT_FILE "words.txt" |
| #else |
| # define DICT_FILE "/usr/share/dict/words" |
| #endif |
| #define USEC_RATE (5e5) |
| #define MAX_WORD_LEN 128 |
| #define ADDR_IS_MULTICAST(a) IN_MULTICAST(htonl(a)) |
| #define MAX_KEY_LEN 64 |
| #define MASTER_KEY_LEN 30 |
| |
| |
| #ifndef HAVE_USLEEP |
| # ifdef HAVE_WINDOWS_H |
| # define usleep(us) Sleep((us)/1000) |
| # else |
| # define usleep(us) sleep((us)/1000000) |
| # endif |
| #endif |
| |
| |
| /* |
| * the function usage() prints an error message describing how this |
| * program should be called, then calls exit() |
| */ |
| |
| void |
| usage(char *prog_name); |
| |
| /* |
| * leave_group(...) de-registers from a multicast group |
| */ |
| |
| void |
| leave_group(int sock, struct ip_mreq mreq, char *name); |
| |
| |
| /* |
| * setup_signal_handler() sets up a signal handler to trigger |
| * cleanups after an interrupt |
| */ |
| int setup_signal_handler(char* name); |
| |
| /* |
| * handle_signal(...) handles interrupt signal to trigger cleanups |
| */ |
| |
| volatile int interrupted = 0; |
| |
| /* |
| * program_type distinguishes the [s]rtp sender and receiver cases |
| */ |
| |
| typedef enum { sender, receiver, unknown } program_type; |
| |
| int |
| main (int argc, char *argv[]) { |
| char *dictfile = DICT_FILE; |
| FILE *dict; |
| char word[MAX_WORD_LEN]; |
| int sock, ret; |
| struct in_addr rcvr_addr; |
| struct sockaddr_in name; |
| struct ip_mreq mreq; |
| #if BEW |
| struct sockaddr_in local; |
| #endif |
| program_type prog_type = unknown; |
| sec_serv_t sec_servs = sec_serv_none; |
| unsigned char ttl = 5; |
| int c; |
| char *input_key = NULL; |
| char *address = NULL; |
| char key[MAX_KEY_LEN]; |
| unsigned short port = 0; |
| rtp_sender_t snd; |
| srtp_policy_t policy; |
| err_status_t status; |
| int len; |
| int do_list_mods = 0; |
| uint32_t ssrc = 0xdeadbeef; /* ssrc value hardcoded for now */ |
| #ifdef RTPW_USE_WINSOCK2 |
| WORD wVersionRequested = MAKEWORD(2, 0); |
| WSADATA wsaData; |
| |
| ret = WSAStartup(wVersionRequested, &wsaData); |
| if (ret != 0) { |
| fprintf(stderr, "error: WSAStartup() failed: %d\n", ret); |
| exit(1); |
| } |
| #endif |
| |
| if (setup_signal_handler(argv[0]) != 0) { |
| exit(1); |
| } |
| |
| /* initialize srtp library */ |
| status = srtp_init(); |
| if (status) { |
| printf("error: srtp initialization failed with error code %d\n", status); |
| exit(1); |
| } |
| |
| /* check args */ |
| while (1) { |
| c = getopt_s(argc, argv, "k:rsaeld:"); |
| if (c == -1) { |
| break; |
| } |
| switch (c) { |
| case 'k': |
| input_key = optarg_s; |
| break; |
| case 'e': |
| sec_servs |= sec_serv_conf; |
| break; |
| case 'a': |
| sec_servs |= sec_serv_auth; |
| break; |
| case 'r': |
| prog_type = receiver; |
| break; |
| case 's': |
| prog_type = sender; |
| break; |
| case 'd': |
| status = crypto_kernel_set_debug_module(optarg_s, 1); |
| if (status) { |
| printf("error: set debug module (%s) failed\n", optarg_s); |
| exit(1); |
| } |
| break; |
| case 'l': |
| do_list_mods = 1; |
| break; |
| default: |
| usage(argv[0]); |
| } |
| } |
| |
| if (prog_type == unknown) { |
| if (do_list_mods) { |
| status = crypto_kernel_list_debug_modules(); |
| if (status) { |
| printf("error: list of debug modules failed\n"); |
| exit(1); |
| } |
| return 0; |
| } else { |
| printf("error: neither sender [-s] nor receiver [-r] specified\n"); |
| usage(argv[0]); |
| } |
| } |
| |
| if ((sec_servs && !input_key) || (!sec_servs && input_key)) { |
| /* |
| * a key must be provided if and only if security services have |
| * been requested |
| */ |
| usage(argv[0]); |
| } |
| |
| if (argc != optind_s + 2) { |
| /* wrong number of arguments */ |
| usage(argv[0]); |
| } |
| |
| /* get address from arg */ |
| address = argv[optind_s++]; |
| |
| /* get port from arg */ |
| port = atoi(argv[optind_s++]); |
| |
| /* set address */ |
| #ifdef HAVE_INET_ATON |
| if (0 == inet_aton(address, &rcvr_addr)) { |
| fprintf(stderr, "%s: cannot parse IP v4 address %s\n", argv[0], address); |
| exit(1); |
| } |
| if (rcvr_addr.s_addr == INADDR_NONE) { |
| fprintf(stderr, "%s: address error", argv[0]); |
| exit(1); |
| } |
| #else |
| rcvr_addr.s_addr = inet_addr(address); |
| if (0xffffffff == rcvr_addr.s_addr) { |
| fprintf(stderr, "%s: cannot parse IP v4 address %s\n", argv[0], address); |
| exit(1); |
| } |
| #endif |
| |
| /* open socket */ |
| sock = socket(PF_INET, SOCK_DGRAM, IPPROTO_UDP); |
| if (sock < 0) { |
| int err; |
| #ifdef RTPW_USE_WINSOCK2 |
| err = WSAGetLastError(); |
| #else |
| err = errno; |
| #endif |
| fprintf(stderr, "%s: couldn't open socket: %d\n", argv[0], err); |
| exit(1); |
| } |
| |
| name.sin_addr = rcvr_addr; |
| name.sin_family = PF_INET; |
| name.sin_port = htons(port); |
| |
| if (ADDR_IS_MULTICAST(rcvr_addr.s_addr)) { |
| if (prog_type == sender) { |
| ret = setsockopt(sock, IPPROTO_IP, IP_MULTICAST_TTL, &ttl, |
| sizeof(ttl)); |
| if (ret < 0) { |
| fprintf(stderr, "%s: Failed to set TTL for multicast group", argv[0]); |
| perror(""); |
| exit(1); |
| } |
| } |
| |
| mreq.imr_multiaddr.s_addr = rcvr_addr.s_addr; |
| mreq.imr_interface.s_addr = htonl(INADDR_ANY); |
| ret = setsockopt(sock, IPPROTO_IP, IP_ADD_MEMBERSHIP, (void*)&mreq, |
| sizeof(mreq)); |
| if (ret < 0) { |
| fprintf(stderr, "%s: Failed to join multicast group", argv[0]); |
| perror(""); |
| exit(1); |
| } |
| } |
| |
| /* report security services selected on the command line */ |
| printf("security services: "); |
| if (sec_servs & sec_serv_conf) |
| printf("confidentiality "); |
| if (sec_servs & sec_serv_auth) |
| printf("message authentication"); |
| if (sec_servs == sec_serv_none) |
| printf("none"); |
| printf("\n"); |
| |
| /* set up the srtp policy and master key */ |
| if (sec_servs) { |
| /* |
| * create policy structure, using the default mechanisms but |
| * with only the security services requested on the command line, |
| * using the right SSRC value |
| */ |
| switch (sec_servs) { |
| case sec_serv_conf_and_auth: |
| crypto_policy_set_rtp_default(&policy.rtp); |
| crypto_policy_set_rtcp_default(&policy.rtcp); |
| break; |
| case sec_serv_conf: |
| crypto_policy_set_aes_cm_128_null_auth(&policy.rtp); |
| crypto_policy_set_rtcp_default(&policy.rtcp); |
| break; |
| case sec_serv_auth: |
| crypto_policy_set_null_cipher_hmac_sha1_80(&policy.rtp); |
| crypto_policy_set_rtcp_default(&policy.rtcp); |
| break; |
| default: |
| printf("error: unknown security service requested\n"); |
| return -1; |
| } |
| policy.ssrc.type = ssrc_specific; |
| policy.ssrc.value = ssrc; |
| policy.key = (uint8_t *) key; |
| policy.ekt = NULL; |
| policy.next = NULL; |
| policy.window_size = 128; |
| policy.allow_repeat_tx = 0; |
| policy.rtp.sec_serv = sec_servs; |
| policy.rtcp.sec_serv = sec_serv_none; /* we don't do RTCP anyway */ |
| |
| /* |
| * read key from hexadecimal on command line into an octet string |
| */ |
| len = hex_string_to_octet_string(key, input_key, MASTER_KEY_LEN*2); |
| |
| /* check that hex string is the right length */ |
| if (len < MASTER_KEY_LEN*2) { |
| fprintf(stderr, |
| "error: too few digits in key/salt " |
| "(should be %d hexadecimal digits, found %d)\n", |
| MASTER_KEY_LEN*2, len); |
| exit(1); |
| } |
| if (strlen(input_key) > MASTER_KEY_LEN*2) { |
| fprintf(stderr, |
| "error: too many digits in key/salt " |
| "(should be %d hexadecimal digits, found %u)\n", |
| MASTER_KEY_LEN*2, (unsigned)strlen(input_key)); |
| exit(1); |
| } |
| |
| printf("set master key/salt to %s/", octet_string_hex_string(key, 16)); |
| printf("%s\n", octet_string_hex_string(key+16, 14)); |
| |
| } else { |
| /* |
| * we're not providing security services, so set the policy to the |
| * null policy |
| * |
| * Note that this policy does not conform to the SRTP |
| * specification, since RTCP authentication is required. However, |
| * the effect of this policy is to turn off SRTP, so that this |
| * application is now a vanilla-flavored RTP application. |
| */ |
| policy.key = (uint8_t *)key; |
| policy.ssrc.type = ssrc_specific; |
| policy.ssrc.value = ssrc; |
| policy.rtp.cipher_type = NULL_CIPHER; |
| policy.rtp.cipher_key_len = 0; |
| policy.rtp.auth_type = NULL_AUTH; |
| policy.rtp.auth_key_len = 0; |
| policy.rtp.auth_tag_len = 0; |
| policy.rtp.sec_serv = sec_serv_none; |
| policy.rtcp.cipher_type = NULL_CIPHER; |
| policy.rtcp.cipher_key_len = 0; |
| policy.rtcp.auth_type = NULL_AUTH; |
| policy.rtcp.auth_key_len = 0; |
| policy.rtcp.auth_tag_len = 0; |
| policy.rtcp.sec_serv = sec_serv_none; |
| policy.window_size = 0; |
| policy.allow_repeat_tx = 0; |
| policy.ekt = NULL; |
| policy.next = NULL; |
| } |
| |
| if (prog_type == sender) { |
| |
| #if BEW |
| /* bind to local socket (to match crypto policy, if need be) */ |
| memset(&local, 0, sizeof(struct sockaddr_in)); |
| local.sin_addr.s_addr = htonl(INADDR_ANY); |
| local.sin_port = htons(port); |
| ret = bind(sock, (struct sockaddr *) &local, sizeof(struct sockaddr_in)); |
| if (ret < 0) { |
| fprintf(stderr, "%s: bind failed\n", argv[0]); |
| perror(""); |
| exit(1); |
| } |
| #endif /* BEW */ |
| |
| /* initialize sender's rtp and srtp contexts */ |
| snd = rtp_sender_alloc(); |
| if (snd == NULL) { |
| fprintf(stderr, "error: malloc() failed\n"); |
| exit(1); |
| } |
| rtp_sender_init(snd, sock, name, ssrc); |
| status = rtp_sender_init_srtp(snd, &policy); |
| if (status) { |
| fprintf(stderr, |
| "error: srtp_create() failed with code %d\n", |
| status); |
| exit(1); |
| } |
| |
| /* open dictionary */ |
| dict = fopen (dictfile, "r"); |
| if (dict == NULL) { |
| fprintf(stderr, "%s: couldn't open file %s\n", argv[0], dictfile); |
| if (ADDR_IS_MULTICAST(rcvr_addr.s_addr)) { |
| leave_group(sock, mreq, argv[0]); |
| } |
| exit(1); |
| } |
| |
| /* read words from dictionary, then send them off */ |
| while (!interrupted && fgets(word, MAX_WORD_LEN, dict) != NULL) { |
| len = strlen(word) + 1; /* plus one for null */ |
| |
| if (len > MAX_WORD_LEN) |
| printf("error: word %s too large to send\n", word); |
| else { |
| rtp_sendto(snd, word, len); |
| printf("sending word: %s", word); |
| } |
| usleep(USEC_RATE); |
| } |
| |
| rtp_sender_deinit_srtp(snd); |
| rtp_sender_dealloc(snd); |
| |
| fclose(dict); |
| } else { /* prog_type == receiver */ |
| rtp_receiver_t rcvr; |
| |
| if (bind(sock, (struct sockaddr *)&name, sizeof(name)) < 0) { |
| close(sock); |
| fprintf(stderr, "%s: socket bind error\n", argv[0]); |
| perror(NULL); |
| if (ADDR_IS_MULTICAST(rcvr_addr.s_addr)) { |
| leave_group(sock, mreq, argv[0]); |
| } |
| exit(1); |
| } |
| |
| rcvr = rtp_receiver_alloc(); |
| if (rcvr == NULL) { |
| fprintf(stderr, "error: malloc() failed\n"); |
| exit(1); |
| } |
| rtp_receiver_init(rcvr, sock, name, ssrc); |
| status = rtp_receiver_init_srtp(rcvr, &policy); |
| if (status) { |
| fprintf(stderr, |
| "error: srtp_create() failed with code %d\n", |
| status); |
| exit(1); |
| } |
| |
| /* get next word and loop */ |
| while (!interrupted) { |
| len = MAX_WORD_LEN; |
| if (rtp_recvfrom(rcvr, word, &len) > -1) |
| printf("\tword: %s\n", word); |
| } |
| |
| rtp_receiver_deinit_srtp(rcvr); |
| rtp_receiver_dealloc(rcvr); |
| } |
| |
| if (ADDR_IS_MULTICAST(rcvr_addr.s_addr)) { |
| leave_group(sock, mreq, argv[0]); |
| } |
| |
| #ifdef RTPW_USE_WINSOCK2 |
| ret = closesocket(sock); |
| #else |
| ret = close(sock); |
| #endif |
| if (ret < 0) { |
| fprintf(stderr, "%s: Failed to close socket", argv[0]); |
| perror(""); |
| } |
| |
| status = srtp_shutdown(); |
| if (status) { |
| printf("error: srtp shutdown failed with error code %d\n", status); |
| exit(1); |
| } |
| |
| #ifdef RTPW_USE_WINSOCK2 |
| WSACleanup(); |
| #endif |
| |
| return 0; |
| } |
| |
| |
| void |
| usage(char *string) { |
| |
| printf("usage: %s [-d <debug>]* [-k <key> [-a][-e]] " |
| "[-s | -r] dest_ip dest_port\n" |
| "or %s -l\n" |
| "where -a use message authentication\n" |
| " -e use encryption\n" |
| " -k <key> sets the srtp master key\n" |
| " -s act as rtp sender\n" |
| " -r act as rtp receiver\n" |
| " -l list debug modules\n" |
| " -d <debug> turn on debugging for module <debug>\n", |
| string, string); |
| exit(1); |
| |
| } |
| |
| |
| void |
| leave_group(int sock, struct ip_mreq mreq, char *name) { |
| int ret; |
| |
| ret = setsockopt(sock, IPPROTO_IP, IP_DROP_MEMBERSHIP, (void*)&mreq, |
| sizeof(mreq)); |
| if (ret < 0) { |
| fprintf(stderr, "%s: Failed to leave multicast group", name); |
| perror(""); |
| } |
| } |
| |
| void handle_signal(int signum) |
| { |
| interrupted = 1; |
| /* Reset handler explicitly, in case we don't have sigaction() (and signal() |
| has BSD semantics), or we don't have SA_RESETHAND */ |
| signal(signum, SIG_DFL); |
| } |
| |
| int setup_signal_handler(char* name) |
| { |
| #if HAVE_SIGACTION |
| struct sigaction act; |
| memset(&act, 0, sizeof(act)); |
| |
| act.sa_handler = handle_signal; |
| sigemptyset(&act.sa_mask); |
| #if defined(SA_RESETHAND) |
| act.sa_flags = SA_RESETHAND; |
| #else |
| act.sa_flags = 0; |
| #endif |
| /* Note that we're not setting SA_RESTART; we want recvfrom to return |
| * EINTR when we signal the receiver. */ |
| |
| if (sigaction(SIGTERM, &act, NULL) != 0) { |
| fprintf(stderr, "%s: error setting up signal handler", name); |
| perror(""); |
| return -1; |
| } |
| #else |
| if (signal(SIGTERM, handle_signal) == SIG_ERR) { |
| fprintf(stderr, "%s: error setting up signal handler", name); |
| perror(""); |
| return -1; |
| } |
| #endif |
| return 0; |
| } |