| Changelog |
| --------- |
| |
| v1.5-chrome47-firefox41 |
| ======================= |
| |
| User api changes |
| ---------------- |
| |
| LWS_CALLBACK_CLIENT_CONNECTION_ERROR may provide an error string if in is |
| non-NULL. If so, the string has length len. |
| |
| LWS_SERVER_OPTION_PEER_CERT_NOT_REQUIRED is available to relax the requirement |
| for peer certs if you are using the option to require client certs. |
| |
| LWS_WITHOUT_BUILTIN_SHA1 cmake option forces lws to use SHA1() defined |
| externally, eg, byOpenSSL, and disables build of libwebsockets_SHA1() |
| |
| |
| v1.4-chrome43-firefox36 |
| ======================= |
| |
| User api additions |
| ------------------ |
| |
| There's a new member in the info struct used to control context creation, |
| ssl_private_key_password, which allows passing into lws the passphrase on |
| an SSL cetificate |
| |
| There's a new member in struct protocols, id, which is ignored by lws but can |
| be used by the user code to mark the selected protocol by user-defined version |
| or capabliity flag information, for the case multiple versions of a protocol are |
| supported. |
| |
| int lws_is_ssl(wsi) added to allow user code to know if the connection was made |
| over ssl or not. If LWS_SERVER_OPTION_ALLOW_NON_SSL_ON_SSL_PORT is used, both |
| ssl and non-ssl connections are possible and may need to be treated differently |
| in the user code. |
| |
| int lws_partial_buffered(wsi) added... should be checked after any |
| libwebsocket_write that will be followed by another libwebsocket_write inside |
| the same writeable callback. If set, you can't do any more writes until the |
| writeable callback is called again. If you only do one write per writeable callback, |
| you can ignore this. |
| |
| HTTP2-related: HTTP2 changes how headers are handled, lws now has new version- |
| agnositic header creation APIs. These do the right thing depending on each |
| connection's HTTP version without the user code having to know or care, except |
| to make sure to use the new APIs for headers (test-server is updated to use |
| them already, so look there for examples) |
| |
| The APIs "render" the headers into a user-provided buffer and bump *p as it |
| is used. If *p reaches end, then the APIs return nonzero for error. |
| |
| LWS_VISIBLE LWS_EXTERN int |
| lws_add_http_header_status(struct libwebsocket_context *context, |
| struct libwebsocket *wsi, |
| unsigned int code, |
| unsigned char **p, |
| unsigned char *end); |
| |
| Start a response header reporting status like 200, 500, etc |
| |
| LWS_VISIBLE LWS_EXTERN int |
| lws_add_http_header_by_name(struct libwebsocket_context *context, |
| struct libwebsocket *wsi, |
| const unsigned char *name, |
| const unsigned char *value, |
| int length, |
| unsigned char **p, |
| unsigned char *end); |
| |
| Add a header like name: value in HTTP1.x |
| |
| LWS_VISIBLE LWS_EXTERN int |
| lws_finalize_http_header(struct libwebsocket_context *context, |
| struct libwebsocket *wsi, |
| unsigned char **p, |
| unsigned char *end); |
| |
| Finish off the headers, like add the extra \r\n in HTTP1.x |
| |
| LWS_VISIBLE LWS_EXTERN int |
| lws_add_http_header_by_token(struct libwebsocket_context *context, |
| struct libwebsocket *wsi, |
| enum lws_token_indexes token, |
| const unsigned char *value, |
| int length, |
| unsigned char **p, |
| unsigned char *end); |
| |
| Add a header by using a lws token as the name part. In HTTP2, this can be |
| compressed to one or two bytes. |
| |
| |
| User api removal |
| ---------------- |
| |
| protocols struct member no_buffer_all_partial_tx is removed. Under some |
| conditions like rewriting extension such as compression in use, the built-in |
| partial send buffering is the only way to deal with the problem, so turning |
| it off is deprecated. |
| |
| |
| User api changes |
| ---------------- |
| |
| HTTP2-related: API libwebsockets_serve_http_file() takes an extra parameter at |
| the end now |
| |
| int other_headers_len) |
| |
| If you are providing other headers, they must be generated using the new |
| HTTP-version-agnostic APIs, and you must provide the length of them using this |
| additional parameter. |
| |
| struct lws_context_creation_info now has an additional member |
| SSL_CTX *provided_client_ssl_ctx you may set to an externally-initialized |
| SSL_CTX managed outside lws. Defaulting to zero keeps the existing behaviour of |
| lws managing the context, if you memset the struct to 0 or have as a filescope |
| initialized struct in bss, no need to change anything. |
| |
| |
| v1.3-chrome37-firefox30 |
| ======================= |
| |
| .gitignore | 1 - |
| CMakeLists.txt | 447 +++-- |
| README.build | 35 +- |
| README.coding | 14 + |
| changelog | 66 + |
| cmake/LibwebsocketsConfig.cmake.in | 17 + |
| cmake/LibwebsocketsConfigVersion.cmake.in | 11 + |
| config.h.cmake | 18 + |
| cross-ming.cmake | 31 + |
| cross-openwrt-makefile | 91 + |
| lib/client-handshake.c | 205 ++- |
| lib/client-parser.c | 58 +- |
| lib/client.c | 158 +- |
| lib/context.c | 341 ++++ |
| lib/extension-deflate-frame.c | 2 +- |
| lib/extension.c | 178 ++ |
| lib/handshake.c | 287 +--- |
| lib/lextable.h | 338 ++++ |
| lib/libev.c | 175 ++ |
| lib/libwebsockets.c | 2089 +++-------------------- |
| lib/libwebsockets.h | 253 ++- |
| lib/lws-plat-unix.c | 404 +++++ |
| lib/lws-plat-win.c | 358 ++++ |
| lib/minilex.c | 530 +++--- |
| lib/output.c | 445 ++--- |
| lib/parsers.c | 682 ++++---- |
| lib/pollfd.c | 239 +++ |
| lib/private-libwebsockets.h | 501 +++++- |
| lib/server-handshake.c | 274 +-- |
| lib/server.c | 858 ++++++++-- |
| lib/service.c | 517 ++++++ |
| lib/sha-1.c | 38 +- |
| lib/ssl-http2.c | 78 + |
| lib/ssl.c | 571 +++++++ |
| test-server/attack.sh | 101 +- |
| test-server/test-client.c | 9 +- |
| test-server/test-echo.c | 17 +- |
| test-server/test-fraggle.c | 7 - |
| test-server/test-ping.c | 12 +- |
| test-server/test-server.c | 330 ++-- |
| test-server/test.html | 4 +- |
| win32port/client/client.vcxproj | 259 --- |
| win32port/client/client.vcxproj.filters | 39 - |
| .../libwebsocketswin32.vcxproj.filters | 93 - |
| win32port/server/server.vcxproj | 276 --- |
| win32port/server/server.vcxproj.filters | 51 - |
| win32port/win32helpers/gettimeofday.h | 59 +- |
| win32port/win32helpers/netdb.h | 1 - |
| win32port/win32helpers/strings.h | 0 |
| win32port/win32helpers/sys/time.h | 1 - |
| win32port/win32helpers/unistd.h | 0 |
| win32port/win32helpers/websock-w32.c | 104 -- |
| win32port/win32helpers/websock-w32.h | 62 - |
| win32port/win32port.sln | 100 -- |
| win32port/zlib/gzio.c | 3 +- |
| 55 files changed, 6779 insertions(+), 5059 deletions(-) |
| |
| |
| User api additions |
| ------------------ |
| |
| POST method is supported |
| |
| The protocol 0 / HTTP callback can now get two new kinds of callback, |
| LWS_CALLBACK_HTTP_BODY (in and len are a chunk of the body of the HTTP request) |
| and LWS_CALLBACK_HTTP_BODY_COMPLETION (the expected amount of body has arrived |
| and been passed to the user code already). These callbacks are used with the |
| post method (see the test server for details). |
| |
| The period between the HTTP header completion and the completion of the body |
| processing is protected by a 5s timeout. |
| |
| The chunks are stored in a malloc'd buffer of size protocols[0].rx_buffer_size. |
| |
| |
| New server option you can enable from user code |
| LWS_SERVER_OPTION_ALLOW_NON_SSL_ON_SSL_PORT allows non-SSL connections to |
| also be accepted on an SSL listening port. It's disabled unless you enable |
| it explicitly. |
| |
| |
| Two new callbacks are added in protocols[0] that are optional for allowing |
| limited thread access to libwebsockets, LWS_CALLBACK_LOCK_POLL and |
| LWS_CALLBACK_UNLOCK_POLL. |
| |
| If you use them, they protect internal and external poll list changes, but if |
| you want to use external thread access to libwebsocket_callback_on_writable() |
| you have to implement your locking here even if you don't use external |
| poll support. |
| |
| If you will use another thread for this, take a lot of care about managing |
| your list of live wsi by doing it from ESTABLISHED and CLOSED callbacks |
| (with your own locking). |
| |
| If you configure cmake with -DLWS_WITH_LIBEV=1 then the code allowing the libev |
| eventloop instead of the default poll() one will also be compiled in. But to |
| use it, you must also set the LWS_SERVER_OPTION_LIBEV flag on the context |
| creation info struct options member. |
| |
| IPV6 is supported and enabled by default except for Windows, you can disable |
| the support at build-time by giving -DLWS_IPV6=, and disable use of it even if |
| compiled in by making sure the flag LWS_SERVER_OPTION_DISABLE_IPV6 is set on |
| the context creation info struct options member. |
| |
| You can give LWS_SERVER_OPTION_DISABLE_OS_CA_CERTS option flag to |
| guarantee the OS CAs will not be used, even if that support was selected at |
| build-time. |
| |
| Optional "token limits" may be enforced by setting the member "token_limits" |
| in struct lws_context_creation_info to point to a struct lws_token_limits. |
| NULL means no token limits used for compatibility. |
| |
| |
| User api changes |
| ---------------- |
| |
| Extra optional argument to libwebsockets_serve_http_file() allows injecion |
| of HTTP headers into the canned response. Eg, cookies may be added like |
| that without getting involved in having to send the header by hand. |
| |
| A new info member http_proxy_address may be used at context creation time to |
| set the http proxy. If non-NULL, it overrides http_proxy environment var. |
| |
| Cmake supports LWS_SSL_CLIENT_USE_OS_CA_CERTS defaulting to on, which gets |
| the client to use the OS CA Roots. If you're worried somebody with the |
| ability to forge for force creation of a client cert from the root CA in |
| your OS, you should disable this since your selfsigned $0 cert is a lot safer |
| then... |
| |
| |
| v1.23-chrome32-firefox24 |
| ======================== |
| |
| Android.mk | 29 + |
| CMakeLists.txt | 573 ++++++++---- |
| COPYING | 503 ----------- |
| INSTALL | 365 -------- |
| Makefile.am | 13 - |
| README.build | 371 ++------ |
| README.coding | 63 ++ |
| autogen.sh | 1578 --------------------------------- |
| changelog | 69 ++ |
| cmake/FindGit.cmake | 163 ++++ |
| cmake/FindOpenSSLbins.cmake | 15 +- |
| cmake/UseRPMTools.cmake | 176 ++++ |
| config.h.cmake | 25 +- |
| configure.ac | 226 ----- |
| cross-arm-linux-gnueabihf.cmake | 28 + |
| lib/Makefile.am | 89 -- |
| lib/base64-decode.c | 98 +- |
| lib/client-handshake.c | 123 ++- |
| lib/client-parser.c | 19 +- |
| lib/client.c | 145 ++- |
| lib/daemonize.c | 4 +- |
| lib/extension.c | 2 +- |
| lib/getifaddrs.h | 4 +- |
| lib/handshake.c | 76 +- |
| lib/libwebsockets.c | 491 ++++++---- |
| lib/libwebsockets.h | 164 ++-- |
| lib/output.c | 214 ++++- |
| lib/parsers.c | 102 +-- |
| lib/private-libwebsockets.h | 66 +- |
| lib/server-handshake.c | 5 +- |
| lib/server.c | 29 +- |
| lib/sha-1.c | 2 +- |
| libwebsockets-api-doc.html | 249 +++--- |
| libwebsockets.pc.in | 11 - |
| libwebsockets.spec | 14 +- |
| m4/ignore-me | 2 - |
| scripts/FindLibWebSockets.cmake | 33 + |
| scripts/kernel-doc | 1 + |
| test-server/Makefile.am | 131 --- |
| test-server/leaf.jpg | Bin 0 -> 2477518 bytes |
| test-server/test-client.c | 78 +- |
| test-server/test-echo.c | 33 +- |
| test-server/test-fraggle.c | 26 +- |
| test-server/test-ping.c | 15 +- |
| test-server/test-server.c | 197 +++- |
| test-server/test.html | 5 +- |
| win32port/win32helpers/gettimeofday.c | 74 +- |
| win32port/win32helpers/websock-w32.h | 6 +- |
| 48 files changed, 2493 insertions(+), 4212 deletions(-) |
| |
| |
| User api additions |
| ------------------ |
| |
| - You can now call libwebsocket_callback_on_writable() on http connectons, |
| and get a LWS_CALLBACK_HTTP_WRITEABLE callback, the same way you can |
| regulate writes with a websocket protocol connection. |
| |
| - A new member in the context creation parameter struct "ssl_cipher_list" is |
| added, replacing CIPHERS_LIST_STRING. NULL means use the ssl library |
| default list of ciphers. |
| |
| - Not really an api addition, but libwebsocket_service_fd() will now zero |
| the revents field of the pollfd it was called with if it handled the |
| descriptor. So you can tell if it is a non-lws fd by checking revents |
| after the service call... if it's still nonzero, the descriptor |
| belongs to you and you need to take care of it. |
| |
| - libwebsocket_rx_flow_allow_all_protocol(protocol) will unthrottle all |
| connections with the established protocol. It's designed to be |
| called from user server code when it sees it can accept more input |
| and may have throttled connections using the server rx flow apis |
| while it was unable to accept any other input The user server code |
| then does not have to try to track while connections it choked, this |
| will free up all of them in one call. |
| |
| - there's a new, optional callback LWS_CALLBACK_CLOSED_HTTP which gets |
| called when an HTTP protocol socket closes |
| |
| - for LWS_CALLBACK_FILTER_PROTOCOL_CONNECTION callback, the user_space alloc |
| has already been done before the callback happens. That means we can |
| use the user parameter to the callback to contain the user pointer, and |
| move the protocol name to the "in" parameter. The docs for this |
| callback are also updated to reflect how to check headers in there. |
| |
| - libwebsocket_client_connect() is now properly nonblocking and async. See |
| README.coding and test-client.c for information on the callbacks you |
| can rely on controlling the async connection period with. |
| |
| - if your OS does not support the http_proxy environment variable convention |
| (eg, reportedly OSX), you can use a new api libwebsocket_set_proxy() |
| to set the proxy details in between context creation and the connection |
| action. For OSes that support http_proxy, that's used automatically. |
| |
| User api changes |
| ---------------- |
| |
| - the external poll callbacks now get the socket descriptor coming from the |
| "in" parameter. The user parameter provides the user_space for the |
| wsi as it normally does on the other callbacks. |
| LWS_CALLBACK_FILTER_NETWORK_CONNECTION also has the socket descriptor |
| delivered by @in now instead of @user. |
| |
| - libwebsocket_write() now returns -1 for error, or the amount of data |
| actually accepted for send. Under load, the OS may signal it is |
| ready to send new data on the socket, but have only a restricted |
| amount of memory to buffer the packet compared to usual. |
| |
| |
| User api removal |
| ---------------- |
| |
| - libwebsocket_ensure_user_space() is removed from the public api, if you |
| were using it to get user_space, you need to adapt your code to only |
| use user_space inside the user callback. |
| |
| - CIPHERS_LIST_STRING is removed |
| |
| - autotools build has been removed. See README.build for info on how to |
| use CMake for your platform |
| |
| |
| v1.21-chrome26-firefox18 |
| ======================== |
| |
| - Fixes buffer overflow bug in max frame size handling if you used the |
| default protocol buffer size. If you declared rx_buffer_size in your |
| protocol, which is recommended anyway, your code was unaffected. |
| |
| v1.2-chrome26-firefox18 |
| ======================= |
| |
| Diffstat |
| -------- |
| |
| .gitignore | 16 +++ |
| CMakeLists.txt | 544 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
| LICENSE | 526 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
| Makefile.am | 1 + |
| README | 20 +++ |
| README.build | 258 ++++++++++++++++++++++++++++++++----- |
| README.coding | 52 ++++++++ |
| changelog | 136 ++++++++++++++++++++ |
| cmake/FindOpenSSLbins.cmake | 33 +++++ |
| config.h.cmake | 173 +++++++++++++++++++++++++ |
| configure.ac | 22 +++- |
| lib/Makefile.am | 20 ++- |
| lib/base64-decode.c | 2 +- |
| lib/client-handshake.c | 190 +++++++++++----------------- |
| lib/client-parser.c | 88 +++++++------ |
| lib/client.c | 384 ++++++++++++++++++++++++++++++------------------------- |
| lib/daemonize.c | 32 +++-- |
| lib/extension-deflate-frame.c | 58 +++++---- |
| lib/extension-deflate-stream.c | 19 ++- |
| lib/extension-deflate-stream.h | 4 +- |
| lib/extension.c | 11 +- |
| lib/getifaddrs.c | 315 +++++++++++++++++++++++----------------------- |
| lib/getifaddrs.h | 30 ++--- |
| lib/handshake.c | 124 +++++++++++------- |
| lib/libwebsockets.c | 736 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-------------------------------------- |
| lib/libwebsockets.h | 237 ++++++++++++++++++++++------------ |
| lib/output.c | 192 +++++++++++----------------- |
| lib/parsers.c | 966 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++---------------------------------------------------------------- |
| lib/private-libwebsockets.h | 225 +++++++++++++++++++++------------ |
| lib/server-handshake.c | 82 ++++++------ |
| lib/server.c | 96 +++++++------- |
| libwebsockets-api-doc.html | 189 ++++++++++++++++++---------- |
| libwebsockets.spec | 17 +-- |
| test-server/attack.sh | 148 ++++++++++++++++++++++ |
| test-server/test-client.c | 125 +++++++++--------- |
| test-server/test-echo.c | 31 +++-- |
| test-server/test-fraggle.c | 32 ++--- |
| test-server/test-ping.c | 52 ++++---- |
| test-server/test-server.c | 129 ++++++++++++------- |
| win32port/libwebsocketswin32/libwebsocketswin32.vcxproj | 279 ---------------------------------------- |
| win32port/libwebsocketswin32/libwebsocketswin32.vcxproj.filters | 23 +++- |
| 41 files changed, 4398 insertions(+), 2219 deletions(-) |
| |
| |
| User api additions |
| ------------------ |
| |
| - lws_get_library_version() returns a const char * with a string like |
| "1.1 9e7f737", representing the library version from configure.ac |
| and the git HEAD hash the library was built from |
| |
| - TCP Keepalive can now optionally be applied to all lws sockets, on Linux |
| also with controllable timeout, number of probes and probe interval. |
| (On BSD type OS, you can only use system default settings for the |
| timing and retries, although enabling it is supported by setting |
| ka_time to nonzero, the exact value has no meaning.) |
| This enables detection of idle connections which are logically okay, |
| but are in fact dead, due to network connectivity issues at the server, |
| client, or any intermediary. By default it's not enabled, but you |
| can enable it by setting a non-zero timeout (in seconds) at the new |
| ka_time member at context creation time. |
| |
| - Two new optional user callbacks added, LWS_CALLBACK_PROTOCOL_DESTROY which |
| is called one-time per protocol as the context is being destroyed, and |
| LWS_CALLBACK_PROTOCOL_INIT which is called when the context is created |
| and the protocols are added, again it's a one-time affair. |
| This lets you manage per-protocol allocations properly including |
| cleaning up after yourself when the server goes down. |
| |
| User api changes |
| ---------------- |
| |
| - libwebsocket_create_context() has changed from taking a ton of parameters |
| to just taking a pointer to a struct containing the parameters. The |
| struct lws_context_creation_info is in libwebsockets.h, the members |
| are in the same order as when they were parameters to the call |
| previously. The test apps are all updated accordingly so you can |
| see example code there. |
| |
| - Header tokens are now deleted after the websocket connection is |
| established. Not just the header data is saved, but the pointer and |
| length array is also removed from (union) scope saving several hundred |
| bytes per connection once it is established |
| |
| - struct libwebsocket_protocols has a new member rx_buffer_size, this |
| controls rx buffer size per connection of that protocol now. Sources |
| for apps built against older versions of the library won't declare |
| this in their protocols, defaulting it to 0. Zero buffer is legal, |
| it causes a default buffer to be allocated (currently 4096) |
| |
| If you want to receive only atomic frames in your user callback, you |
| should set this to greater than your largest frame size. If a frame |
| comes that exceeds that, no error occurs but the callback happens as |
| soon as the buffer limit is reached, and again if it is reached again |
| or the frame completes. You can detect that has happened by seeing |
| there is still frame content pending using |
| libwebsockets_remaining_packet_payload() |
| |
| By correctly setting this, you can save a lot of memory when your |
| protocol has small frames (see the test server and client sources). |
| |
| - LWS_MAX_HEADER_LEN now defaults to 1024 and is the total amount of known |
| header payload lws can cope with, that includes the GET URL, origin |
| etc. Headers not understood by lws are ignored and their payload |
| not included in this. |
| |
| |
| User api removals |
| ----------------- |
| |
| - The configuration-time option MAX_USER_RX_BUFFER has been replaced by a |
| buffer size chosen per-protocol. For compatibility, there's a default |
| of 4096 rx buffer, but user code should set the appropriate size for |
| the protocol frames. |
| |
| - LWS_INITIAL_HDR_ALLOC and LWS_ADDITIONAL_HDR_ALLOC are no longer needed |
| and have been removed. There's a new header management scheme that |
| handles them in a much more compact way. |
| |
| - libwebsockets_hangup_on_client() is removed. If you want to close the |
| connection you must do so from the user callback and by returning |
| -1 from there. |
| |
| - libwebsocket_close_and_free_session() is now private to the library code |
| only and not exposed for user code. If you want to close the |
| connection, you must do so from the user callback by returning -1 |
| from there. |
| |
| |
| New features |
| ------------ |
| |
| - Cmake project file added, aimed initially at Windows support: this replaces |
| the visual studio project files that were in the tree until now. |
| |
| - CyaSSL now supported in place of OpenSSL (--use-cyassl on configure) |
| |
| - PATH_MAX or MAX_PATH no longer needed |
| |
| - cutomizable frame rx buffer size by protocol |
| |
| - optional TCP keepalive so dead peers can be detected, can be enabled at |
| context-creation time |
| |
| - valgrind-clean: no SSL or CyaSSL: completely clean. With OpenSSL, 88 bytes |
| lost at OpenSSL library init and symptomless reports of uninitialized |
| memory usage... seems to be a known and ignored problem at OpenSSL |
| |
| - By default debug is enabled and the library is built for -O0 -g to faclitate |
| that. Use --disable-debug configure option to build instead with -O4 |
| and no -g (debug info), obviously providing best performance and |
| reduced binary size. |
| |
| - 1.0 introduced some code to try to not deflate small frames, however this |
| seems to break when confronted with a mixture of frames above and |
| below the threshold, so it's removed. Veto the compression extension |
| in your user callback if you will typically have very small frames. |
| |
| - There are many memory usage improvements, both a reduction in malloc/ |
| realloc and architectural changes. A websocket connection now |
| consumes only 296 bytes with SSL or 272 bytes without on x86_64, |
| during header processing an additional 1262 bytes is allocated in a |
| single malloc, but is freed when the websocket connection starts. |
| The RX frame buffer defined by the protocol in user |
| code is also allocated per connection, this represents the largest |
| frame you can receive atomically in that protocol. |
| |
| - On ARM9 build, just http+ws server no extensions or ssl, <12Kbytes .text |
| and 112 bytes per connection (+1328 only during header processing) |
| |
| |
| v1.1-chrome26-firefox18 |
| ======================= |
| |
| Diffstat |
| -------- |
| |
| Makefile.am | 4 + |
| README-test-server | 291 --- |
| README.build | 239 ++ |
| README.coding | 138 ++ |
| README.rst | 72 - |
| README.test-apps | 272 +++ |
| configure.ac | 116 +- |
| lib/Makefile.am | 55 +- |
| lib/base64-decode.c | 5 +- |
| lib/client-handshake.c | 121 +- |
| lib/client-parser.c | 394 ++++ |
| lib/client.c | 807 +++++++ |
| lib/daemonize.c | 212 ++ |
| lib/extension-deflate-frame.c | 132 +- |
| lib/extension-deflate-stream.c | 12 +- |
| lib/extension-x-google-mux.c | 1223 ---------- |
| lib/extension-x-google-mux.h | 96 - |
| lib/extension.c | 8 - |
| lib/getifaddrs.c | 271 +++ |
| lib/getifaddrs.h | 76 + |
| lib/handshake.c | 582 +---- |
| lib/libwebsockets.c | 2493 ++++++--------------- |
| lib/libwebsockets.h | 115 +- |
| lib/md5.c | 217 -- |
| lib/minilex.c | 440 ++++ |
| lib/output.c | 628 ++++++ |
| lib/parsers.c | 2016 +++++------------ |
| lib/private-libwebsockets.h | 284 +-- |
| lib/server-handshake.c | 275 +++ |
| lib/server.c | 377 ++++ |
| libwebsockets-api-doc.html | 300 +-- |
| m4/ignore-me | 2 + |
| test-server/Makefile.am | 111 +- |
| test-server/libwebsockets.org-logo.png | Bin 0 -> 7029 bytes |
| test-server/test-client.c | 45 +- |
| test-server/test-echo.c | 330 +++ |
| test-server/test-fraggle.c | 20 +- |
| test-server/test-ping.c | 22 +- |
| test-server/test-server-extpoll.c | 554 ----- |
| test-server/test-server.c | 349 ++- |
| test-server/test.html | 3 +- |
| win32port/zlib/ZLib.vcxproj | 749 ++++--- |
| win32port/zlib/ZLib.vcxproj.filters | 188 +- |
| win32port/zlib/adler32.c | 348 ++- |
| win32port/zlib/compress.c | 160 +- |
| win32port/zlib/crc32.c | 867 ++++---- |
| win32port/zlib/crc32.h | 882 ++++---- |
| win32port/zlib/deflate.c | 3799 +++++++++++++++----------------- |
| win32port/zlib/deflate.h | 688 +++--- |
| win32port/zlib/gzclose.c | 50 +- |
| win32port/zlib/gzguts.h | 325 ++- |
| win32port/zlib/gzlib.c | 1157 +++++----- |
| win32port/zlib/gzread.c | 1242 ++++++----- |
| win32port/zlib/gzwrite.c | 1096 +++++---- |
| win32port/zlib/infback.c | 1272 ++++++----- |
| win32port/zlib/inffast.c | 680 +++--- |
| win32port/zlib/inffast.h | 22 +- |
| win32port/zlib/inffixed.h | 188 +- |
| win32port/zlib/inflate.c | 2976 +++++++++++++------------ |
| win32port/zlib/inflate.h | 244 +- |
| win32port/zlib/inftrees.c | 636 +++--- |
| win32port/zlib/inftrees.h | 124 +- |
| win32port/zlib/trees.c | 2468 +++++++++++---------- |
| win32port/zlib/trees.h | 256 +-- |
| win32port/zlib/uncompr.c | 118 +- |
| win32port/zlib/zconf.h | 934 ++++---- |
| win32port/zlib/zlib.h | 3357 ++++++++++++++-------------- |
| win32port/zlib/zutil.c | 642 +++--- |
| win32port/zlib/zutil.h | 526 ++--- |
| 69 files changed, 19556 insertions(+), 20145 deletions(-) |
| |
| user api changes |
| ---------------- |
| |
| - libwebsockets_serve_http_file() now takes a context as first argument |
| |
| - libwebsockets_get_peer_addresses() now takes a context and wsi as first |
| two arguments |
| |
| |
| user api additions |
| ------------------ |
| |
| - lwsl_...() logging apis, default to stderr but retargetable by user code; |
| may be used also by user code |
| |
| - lws_set_log_level() set which logging apis are able to emit (defaults to |
| notice, warn, err severities), optionally set the emit callback |
| |
| - lwsl_emit_syslog() helper callback emits to syslog |
| |
| - lws_daemonize() helper code that forks the app into a headless daemon |
| properly, maintains a lock file with pid in suitable for sysvinit etc to |
| control lifecycle |
| |
| - LWS_CALLBACK_HTTP_FILE_COMPLETION callback added since http file |
| transfer is now asynchronous (see test server code) |
| |
| - lws_frame_is_binary() from a wsi pointer, let you know if the received |
| data was sent in BINARY mode |
| |
| |
| user api removals |
| ----------------- |
| |
| - libwebsockets_fork_service_loop() - no longer supported (had intractable problems) |
| arrange your code to act from the user callback instead from same |
| process context as the service loop |
| |
| - libwebsockets_broadcast() - use libwebsocket_callback_on_writable[_all_protocol]() |
| instead from same process context as the service loop. See the test apps |
| for examples. |
| |
| - x-google-mux() removed until someone wants it |
| |
| - pre -v13 (ancient) protocol support removed |
| |
| |
| New features |
| ------------ |
| |
| - echo test server and client compatible with echo.websocket.org added |
| |
| - many new configure options (see README.build) to reduce footprint of the |
| library to what you actually need, eg, --without-client and |
| --without-server |
| |
| - http + websocket server can build to as little as 12K .text for ARM |
| |
| - no more MAX_CLIENTS limitation; adapts to support the max number of fds |
| allowed to the process by ulimit, defaults to 1024 on Fedora and |
| Ubuntu. Use ulimit to control this without needing to configure |
| the library. Code here is smaller and faster. |
| |
| - adaptive ratio of listen socket to connection socket service allows |
| good behaviour under Apache ab test load. Tested with thousands |
| of simultaneous connections |
| |
| - reduction in per-connection memory footprint by moving to a union to hold |
| mutually-exclusive state for the connection |
| |
| - robustness: Out of Memory taken care of for all allocation code now |
| |
| - internal getifaddrs option if your toolchain lacks it (some uclibc) |
| |
| - configurable memory limit for deflate operations |
| |
| - improvements in SSL code nonblocking operation, possible hang solved, |
| some SSL operations broken down into pollable states so there is |
| no library blocking, timeout coverage for SSL_connect |
| |
| - extpoll test server merged into single test server source |
| |
| - robustness: library should deal with all recoverable socket conditions |
| |
| - rx flowcontrol for backpressure notification fixed and implmeneted |
| correctly in the test server |
| |
| - optimal lexical parser added for header processing; all headers in a |
| single 276-byte state table |
| |
| - latency tracking api added (configure --with-latency) |
| |
| - Improved in-tree documentation, REAME.build, README.coding, |
| README.test-apps, changelog |
| |
| - Many small fixes |
| |
| |
| v1.0-chrome25-firefox17 (6cd1ea9b005933f) |