win32/Makefile.bcb

# Makefile for libxml2, specific for Windows, BCB6 and Borland make.
#
# Take a look at the beginning and modify the variables to suit your 
# environment. Having done that, you can do a
#
# make [all]     to build the libxml and the accompanying utilities.
# make clean     to remove all compiler output files and return to a
#                 clean state.
# make rebuild   to rebuild everything from scratch. This basically does
#                 a 'nmake clean' and then a 'nmake all'.
# make install   to install the library and its header files.
#
# August 2003, Eric Zurcher <Eric.Zurcher@csiro.au>
# based on the MSVC version of
# March 2002, Igor Zlatkovic <igor@zlatkovic.com>
#

AUTOCONF = .\config.bcb

# Extra setting to control whether to use dynamic or static Borland runtime. 
# Set to "1" to use static RTL, anything else to use dynamic RTL
STATIC_RTL = 0

# If you cannot run the configuration script, which would take the burden of
# editing this file from your back, then remove the following line...
!include $(AUTOCONF)
# ...and enable the following lines and adapt them to your environment.
#XML_SRCDIR = ..
#UTILS_SRCDIR = ..
#BINDIR = binaries
#LIBXML_MAJOR_VERSION = 0 # set this to the right value.
#LIBXML_MINOR_VERSION = 0 # set this to the right value.
#LIBXML_MICRO_VERSION = 0 # set this to the right value.
#WITH_TRIO = 0
#WITH_THREADS = 0
#WITH_FTP = 1
#WITH_HTTP = 1
#WITH_HTML = 1
#WITH_C14N = 1
#WITH_CATALOG = 1
#WITH_DOCB = 1
#WITH_XPATH = 1
#WITH_XPTR = 1
#WITH_XINCLUDE = 1
#WITH_ICONV = 1
#WITH_ZLIB = 0
#WITH_DEBUG = 1
#WITH_MEM_DEBUG = 0
#WITH_SCHEMAS = 1
#DEBUG = 0
#STATIC = 0
#PREFIX = . # set this to the right value.
#BINPREFIX = $(PREFIX)\bin
#INCPREFIX = $(PREFIX)\include
#LIBPREFIX = $(PREFIX)\lib
#SOPREFIX = $(PREFIX)\lib
#INCLUDE = $(INCLUDE);$(INCPREFIX)
#LIB = $(LIB);$(LIBPREFIX) 


# There should never be a need to modify anything below this line.
# ----------------------------------------------------------------

!if !$d(BCB)
BCB = $(MAKEDIR)\..
!endif
.autodepend

# Names of various input and output components.
XML_NAME = xml2
XML_BASENAME = lib$(XML_NAME)
XML_SO = $(XML_BASENAME).dll
XML_IMP = $(XML_BASENAME).lib
XML_DEF = $(XML_BASENAME).def
XML_A = $(XML_BASENAME)_a.lib
DUMMY = dir.exists

# Place where we let the compiler put its intermediate trash.
XML_INTDIR = $(XML_BASENAME).int
XML_INTDIR_A = $(XML_BASENAME)_a.int
UTILS_INTDIR = utils.int

# The preprocessor and its options.
CPP = cpp32.exe -P- -DWIN32
CPPFLAGS = -I$(XML_SRCDIR)\include
!if "$(WITH_THREADS)" != "no"
CPPFLAGS = $(CPPFLAGS) -D_REENTRANT -D__MT__
!endif

# The compiler and its options.
CC = bcc32.exe
CFLAGS = -q -DWIN32 -D_NO_VCL -D_WINDOWS -D_MBCS -DEILSEQ=2 -w-
CFLAGS = $(CFLAGS) -I$(XML_SRCDIR) -I$(XML_SRCDIR)\include -I$(INCPREFIX) -I$(INCLUDE)
!if "$(WITH_THREADS)" != "no"
CFLAGS = $(CFLAGS) -D_REENTRANT -tWM
!endif
!if "$(WITH_THREADS)" == "yes" || "$(WITH_THREADS)" == "ctls"
CFLAGS = $(CFLAGS) -DHAVE_WIN32_THREADS -DHAVE_COMPILER_TLS
!else if "$(WITH_THREADS)" == "native"
CFLAGS = $(CFLAGS) -DHAVE_WIN32_THREADS
!else if "$(WITH_THREADS)" == "posix"
CFLAGS = $(CFLAGS) -DHAVE_PTHREAD_H
!endif
!if "$(WITH_ZLIB)" == "1"
CFLAGS = $(CFLAGS) -DHAVE_ZLIB_H
!endif

# The linker and its options.
LD = ilink32.exe
LDFLAGS = -q -U$(LIBXML_MAJOR_VERSION).$(LIBXML_MINOR_VERSION)
LDFLAGS = $(LDFLAGS) -L$(BINDIR);$(LIBPREFIX);$(LIB);$(BCB)\lib\PSdk
LIBS = import32.lib
!if "$(WITH_THREADS)" != "no" && "$(STATIC_RTL)" == "1"
LIBS = $(LIBS) cw32mt.lib
!elif "$(WITH_THREADS)" != "no"
LIBS = $(LIBS) cw32mti.lib
!elif "$(STATIC_RTL)" == "1"
LIBS = $(LIBS) cw32.lib
else
LIBS = $(LIBS) cw32i.lib
!endif
!if "$(WITH_FTP)" == "1" || "$(WITH_HTTP)" == "1"
LIBS = $(LIBS) wsock32.lib
!endif 
!if "$(WITH_ICONV)" == "1"
LIBS = $(LIBS) iconvomf.lib
!endif 
!if "$(WITH_ZLIB)" == "1"
LIBS = $(LIBS) zlibomf.lib
!endif
!if "$(WITH_THREADS)" == "posix"
LIBS = $(LIBS) pthreadVC.lib
!endif

# The archiver and its options.
AR = tlib.exe
ARFLAGS = /P64 /0

# Optimisation and debug symbols.
!if "$(DEBUG)" == "1"
CFLAGS = $(CFLAGS) -D_DEBUG -Od -v
LDFLAGS = $(LDFLAGS) -v
!else
CFLAGS = $(CFLAGS) -DNDEBUG -O2 
LDFLAGS = $(LDFLAGS)
!endif

# Libxml object files.
XML_OBJS = $(XML_INTDIR)\c14n.obj\
	$(XML_INTDIR)\catalog.obj\
	$(XML_INTDIR)\debugXML.obj\
	$(XML_INTDIR)\dict.obj\
	$(XML_INTDIR)\DOCBparser.obj\
	$(XML_INTDIR)\encoding.obj\
	$(XML_INTDIR)\entities.obj\
	$(XML_INTDIR)\error.obj\
	$(XML_INTDIR)\globals.obj\
	$(XML_INTDIR)\hash.obj\
	$(XML_INTDIR)\HTMLparser.obj\
	$(XML_INTDIR)\HTMLtree.obj\
	$(XML_INTDIR)\legacy.obj\
	$(XML_INTDIR)\list.obj\
	$(XML_INTDIR)\nanoftp.obj\
	$(XML_INTDIR)\nanohttp.obj\
	$(XML_INTDIR)\parser.obj\
	$(XML_INTDIR)\parserInternals.obj\
	$(XML_INTDIR)\relaxng.obj\
	$(XML_INTDIR)\SAX.obj\
	$(XML_INTDIR)\SAX2.obj\
	$(XML_INTDIR)\threads.obj\
	$(XML_INTDIR)\tree.obj\
	$(XML_INTDIR)\uri.obj\
	$(XML_INTDIR)\valid.obj\
	$(XML_INTDIR)\xinclude.obj\
	$(XML_INTDIR)\xlink.obj\
	$(XML_INTDIR)\xmlIO.obj\
	$(XML_INTDIR)\xmlmemory.obj\
	$(XML_INTDIR)\xmlreader.obj\
	$(XML_INTDIR)\xmlregexp.obj\
	$(XML_INTDIR)\xmlschemas.obj\
	$(XML_INTDIR)\xmlschemastypes.obj\
	$(XML_INTDIR)\xmlunicode.obj\
	$(XML_INTDIR)\xpath.obj\
	$(XML_INTDIR)\xpointer.obj

# Static libxml object files.
XML_OBJS_A = $(XML_INTDIR_A)\c14n.obj\
	$(XML_INTDIR_A)\catalog.obj\
	$(XML_INTDIR_A)\debugXML.obj\
	$(XML_INTDIR_A)\dict.obj\
	$(XML_INTDIR_A)\DOCBparser.obj\
	$(XML_INTDIR_A)\encoding.obj\
	$(XML_INTDIR_A)\entities.obj\
	$(XML_INTDIR_A)\error.obj\
	$(XML_INTDIR_A)\globals.obj\
	$(XML_INTDIR_A)\hash.obj\
	$(XML_INTDIR_A)\HTMLparser.obj\
	$(XML_INTDIR_A)\HTMLtree.obj\
	$(XML_INTDIR_A)\legacy.obj\
	$(XML_INTDIR_A)\list.obj\
	$(XML_INTDIR_A)\nanoftp.obj\
	$(XML_INTDIR_A)\nanohttp.obj\
	$(XML_INTDIR_A)\parser.obj\
	$(XML_INTDIR_A)\parserInternals.obj\
	$(XML_INTDIR_A)\relaxng.obj\
	$(XML_INTDIR_A)\SAX.obj\
	$(XML_INTDIR_A)\SAX2.obj\
	$(XML_INTDIR_A)\threads.obj\
	$(XML_INTDIR_A)\tree.obj\
	$(XML_INTDIR_A)\uri.obj\
	$(XML_INTDIR_A)\valid.obj\
	$(XML_INTDIR_A)\xinclude.obj\
	$(XML_INTDIR_A)\xlink.obj\
	$(XML_INTDIR_A)\xmlIO.obj\
	$(XML_INTDIR_A)\xmlmemory.obj\
	$(XML_INTDIR_A)\xmlreader.obj\
	$(XML_INTDIR_A)\xmlregexp.obj\
	$(XML_INTDIR_A)\xmlschemas.obj\
	$(XML_INTDIR_A)\xmlschemastypes.obj\
	$(XML_INTDIR_A)\xmlunicode.obj\
	$(XML_INTDIR_A)\xpath.obj\
	$(XML_INTDIR_A)\xpointer.obj

# Xmllint and friends executables.
UTILS = $(BINDIR)\xmllint.exe\
	$(BINDIR)\xmlcatalog.exe\
	$(BINDIR)\testAutomata.exe\
	$(BINDIR)\testC14N.exe\
	$(BINDIR)\testDocbook.exe\
	$(BINDIR)\testHTML.exe\
	$(BINDIR)\testReader.exe\
	$(BINDIR)\testRelax.exe\
	$(BINDIR)\testRegexp.exe\
	$(BINDIR)\testSAX.exe\
	$(BINDIR)\testSchemas.exe\
	$(BINDIR)\testURI.exe\
	$(BINDIR)\testXPath.exe


!if "$(WITH_THREADS)" == "yes" || "$(WITH_THREADS)" == "ctls" || "$(WITH_THREADS)" == "native"
UTILS = $(UTILS) $(BINDIR)\testThreadsWin32.exe
!else if "$(WITH_THREADS)" == "posix"
UTILS = $(UTILS) $(BINDIR)\testThreads.exe
!endif


all : libxml libxmla utils

libxml : $(BINDIR)\$(XML_SO) 

libxmla : $(BINDIR)\$(XML_A)

utils : $(UTILS)

clean :
	if exist $(XML_INTDIR) rmdir /S /Q $(XML_INTDIR)
	if exist $(XML_INTDIR_A) rmdir /S /Q $(XML_INTDIR_A)
	if exist $(UTILS_INTDIR) rmdir /S /Q $(UTILS_INTDIR)
	if exist $(BINDIR) rmdir /S /Q $(BINDIR)

distclean : clean
	if exist config.* del config.*
	if exist Makefile del Makefile

rebuild : clean all

install : all
	if not exist $(INCPREFIX)\libxml mkdir $(INCPREFIX)\libxml
	if not exist $(BINPREFIX) mkdir $(BINPREFIX)
	if not exist $(LIBPREFIX) mkdir $(LIBPREFIX)
	copy $(XML_SRCDIR)\include\libxml\*.h $(INCPREFIX)\libxml
	copy $(BINDIR)\$(XML_SO) $(SOPREFIX)
	copy $(BINDIR)\$(XML_A) $(LIBPREFIX)
	copy $(BINDIR)\$(XML_IMP) $(LIBPREFIX)
	copy $(BINDIR)\*.exe $(BINPREFIX)
	-copy $(BINDIR)\*.pdb $(BINPREFIX)

# This is a target for me, to make a binary distribution. Not for the public use,
# keep your hands off :-)
BDVERSION = $(LIBXML_MAJOR_VERSION).$(LIBXML_MINOR_VERSION).$(LIBXML_MICRO_VERSION)
BDPREFIX = $(XML_BASENAME)-$(BDVERSION).win32
bindist : all
	$(MAKE) /nologo PREFIX=$(BDPREFIX) BINPREFIX=$(BDPREFIX)\util install
	cscript //NoLogo configure.js genreadme $(XML_BASENAME) $(BDVERSION) $(BDPREFIX)\readme.txt


# Makes the output directory.
$(BINDIR)\$(DUMMY) :
	if not exist $(BINDIR) mkdir $(BINDIR)
	touch $(BINDIR)\$(DUMMY)

# Makes the libxml intermediate directory.
$(XML_INTDIR)\$(DUMMY) :
	if not exist $(XML_INTDIR) mkdir $(XML_INTDIR)
	touch $(XML_INTDIR)\$(DUMMY)

# Makes the static libxml intermediate directory.
$(XML_INTDIR_A)\$(DUMMY) :
	if not exist $(XML_INTDIR_A) mkdir $(XML_INTDIR_A)
	touch $(XML_INTDIR_A)\$(DUMMY)

# An implicit rule for libxml compilation.
{$(XML_SRCDIR)}.c{$(XML_INTDIR)}.obj:
	$(CC) $(CFLAGS) -n$(XML_INTDIR) -c $<

# An implicit rule for static libxml compilation.
{$(XML_SRCDIR)}.c{$(XML_INTDIR_A)}.obj:
	$(CC) $(CFLAGS) -DLIBXML_STATIC -n$(XML_INTDIR_A)\ -c $<

# Compiles libxml source. Uses the implicit rule for commands.
$(XML_OBJS) : $(XML_INTDIR)\$(DUMMY)

# Compiles static libxml source. Uses the implicit rule for commands.
$(XML_OBJS_A) : $(XML_INTDIR_A)\$(DUMMY) 

#def4bcb.exe : def4bcb.c

# Creates the export definition file (DEF) for libxml.
#$(XML_INTDIR)\$(XML_DEF) : $(XML_INTDIR)\$(DUMMY) $(XML_DEF).src def4bcb.exe
#	$(CPP) $(CPPFLAGS) -o $(XML_INTDIR)\$(XML_DEF).tmp $(XML_DEF).src
#	def4bcb -msnames < $(XML_INTDIR)\$(XML_DEF).tmp > $(XML_INTDIR)\$(XML_DEF)

# Creates the libxml shared object.
$(BINDIR)\$(XML_SO) : $(BINDIR)\$(DUMMY) $(XML_OBJS)
	$(LD) $(LDFLAGS) -Tpd -Gi c0d32.obj $(XML_OBJS),$(BINDIR)\$(XML_SO),,$(LIBS)

#$(BINDIR)\$(XML_SO) : $(BINDIR)\$(DUMMY) $(XML_OBJS) $(XML_INTDIR)\$(XML_DEF)
#	$(LD) $(LDFLAGS) -Tpd -Gi c0d32.obj $(XML_OBJS),$(BINDIR)\$(XML_SO),,$(LIBS),$(XML_INTDIR)\$(XML_DEF)

# Creates the libxml archive.
$(BINDIR)\$(XML_A) : $(BINDIR)\$(DUMMY) $(XML_OBJS_A)
	$(AR) $(BINDIR)\$(XML_A) $(ARFLAGS) /u $(XML_OBJS_A)

# Makes the utils intermediate directory.
$(UTILS_INTDIR)\$(DUMMY) :
	if not exist $(UTILS_INTDIR) mkdir $(UTILS_INTDIR)
	touch $(UTILS_INTDIR)\$(DUMMY)

# An implicit rule for xmllint and friends.
!if "$(STATIC)" == "1"
{$(UTILS_SRCDIR)}.c{$(BINDIR)}.exe:
	$(CC) -DLIBXML_STATIC -w -D_RTLDLL -tWC $(CFLAGS) -o$(UTILS_INTDIR)\$&.obj -c $< 
	$(LD) $(LDFLAGS) c0x32.obj $(UTILS_INTDIR)\$&.obj,$@,,$(LIBS) $(XML_A)
!else
{$(UTILS_SRCDIR)}.c{$(BINDIR)}.exe:
	$(CC) $(CFLAGS) -D_RTLDLL -tWC -o$(UTILS_INTDIR)\$&.obj -c $< 
	$(LD) $(LDFLAGS) c0x32.obj $(UTILS_INTDIR)\$&.obj $(XML_IMP),$@,,$(LIBS) 
!endif

# Builds xmllint and friends. Uses the implicit rule for commands.
$(UTILS) : $(UTILS_INTDIR)\$(DUMMY) $(BINDIR)\$(DUMMY) $(BINDIR)\$(XML_SO) $(BINDIR)\$(XML_A)

# Source dependences should be autogenerated somehow here, but how to
# do it? I have no clue.