| """ |
| LLDB module which provides the abstract base class of lldb test case. |
| |
| The concrete subclass can override lldbtest.TesBase in order to inherit the |
| common behavior for unitest.TestCase.setUp/tearDown implemented in this file. |
| |
| The subclass should override the attribute mydir in order for the python runtime |
| to locate the individual test cases when running as part of a large test suite |
| or when running each test case as a separate python invocation. |
| |
| ./dotest.py provides a test driver which sets up the environment to run the |
| entire test suite. Users who want to run a test case on its own can specify the |
| LLDB_TEST and PYTHONPATH environment variables, for example: |
| |
| $ export LLDB_TEST=$PWD |
| $ export PYTHONPATH=/Volumes/data/lldb/svn/trunk/build/Debug/LLDB.framework/Resources/Python:$LLDB_TEST:$LLDB_TEST/plugins:$LLDB_TEST/pexpect-2.4 |
| $ echo $LLDB_TEST |
| /Volumes/data/lldb/svn/trunk/test |
| $ echo $PYTHONPATH |
| /Volumes/data/lldb/svn/trunk/build/Debug/LLDB.framework/Resources/Python:/Volumes/data/lldb/svn/trunk/test:/Volumes/data/lldb/svn/trunk/test/plugins |
| $ python function_types/TestFunctionTypes.py |
| . |
| ---------------------------------------------------------------------- |
| Ran 1 test in 0.363s |
| |
| OK |
| $ LLDB_COMMAND_TRACE=YES python array_types/TestArrayTypes.py |
| |
| ... |
| |
| runCmd: breakpoint set -f main.c -l 42 |
| output: Breakpoint created: 1: file ='main.c', line = 42, locations = 1 |
| |
| runCmd: run |
| output: Launching '/Volumes/data/lldb/svn/trunk/test/array_types/a.out' (x86_64) |
| |
| ... |
| |
| runCmd: frame variable strings |
| output: (char *[4]) strings = { |
| (char *) strings[0] = 0x0000000100000f0c "Hello", |
| (char *) strings[1] = 0x0000000100000f12 "Hola", |
| (char *) strings[2] = 0x0000000100000f17 "Bonjour", |
| (char *) strings[3] = 0x0000000100000f1f "Guten Tag" |
| } |
| |
| runCmd: frame variable char_16 |
| output: (char [16]) char_16 = { |
| (char) char_16[0] = 'H', |
| (char) char_16[1] = 'e', |
| (char) char_16[2] = 'l', |
| (char) char_16[3] = 'l', |
| (char) char_16[4] = 'o', |
| (char) char_16[5] = ' ', |
| (char) char_16[6] = 'W', |
| (char) char_16[7] = 'o', |
| (char) char_16[8] = 'r', |
| (char) char_16[9] = 'l', |
| (char) char_16[10] = 'd', |
| (char) char_16[11] = '\n', |
| (char) char_16[12] = '\0', |
| (char) char_16[13] = '\0', |
| (char) char_16[14] = '\0', |
| (char) char_16[15] = '\0' |
| } |
| |
| runCmd: frame variable ushort_matrix |
| output: (unsigned short [2][3]) ushort_matrix = { |
| (unsigned short [3]) ushort_matrix[0] = { |
| (unsigned short) ushort_matrix[0][0] = 0x0001, |
| (unsigned short) ushort_matrix[0][1] = 0x0002, |
| (unsigned short) ushort_matrix[0][2] = 0x0003 |
| }, |
| (unsigned short [3]) ushort_matrix[1] = { |
| (unsigned short) ushort_matrix[1][0] = 0x000b, |
| (unsigned short) ushort_matrix[1][1] = 0x0016, |
| (unsigned short) ushort_matrix[1][2] = 0x0021 |
| } |
| } |
| |
| runCmd: frame variable long_6 |
| output: (long [6]) long_6 = { |
| (long) long_6[0] = 1, |
| (long) long_6[1] = 2, |
| (long) long_6[2] = 3, |
| (long) long_6[3] = 4, |
| (long) long_6[4] = 5, |
| (long) long_6[5] = 6 |
| } |
| |
| . |
| ---------------------------------------------------------------------- |
| Ran 1 test in 0.349s |
| |
| OK |
| $ |
| """ |
| |
| import os, sys, traceback |
| import re |
| from subprocess import * |
| import StringIO |
| import time |
| import types |
| import unittest2 |
| import lldb |
| |
| # See also dotest.parseOptionsAndInitTestdirs(), where the environment variables |
| # LLDB_COMMAND_TRACE and LLDB_DO_CLEANUP are set from '-t' and '-r dir' options. |
| |
| # By default, traceAlways is False. |
| if "LLDB_COMMAND_TRACE" in os.environ and os.environ["LLDB_COMMAND_TRACE"]=="YES": |
| traceAlways = True |
| else: |
| traceAlways = False |
| |
| # By default, doCleanup is True. |
| if "LLDB_DO_CLEANUP" in os.environ and os.environ["LLDB_DO_CLEANUP"]=="NO": |
| doCleanup = False |
| else: |
| doCleanup = True |
| |
| |
| # |
| # Some commonly used assert messages. |
| # |
| |
| COMMAND_FAILED_AS_EXPECTED = "Command has failed as expected" |
| |
| CURRENT_EXECUTABLE_SET = "Current executable set successfully" |
| |
| PROCESS_IS_VALID = "Process is valid" |
| |
| PROCESS_KILLED = "Process is killed successfully" |
| |
| PROCESS_EXITED = "Process exited successfully" |
| |
| PROCESS_STOPPED = "Process status should be stopped" |
| |
| RUN_SUCCEEDED = "Process is launched successfully" |
| |
| RUN_COMPLETED = "Process exited successfully" |
| |
| BACKTRACE_DISPLAYED_CORRECTLY = "Backtrace displayed correctly" |
| |
| BREAKPOINT_CREATED = "Breakpoint created successfully" |
| |
| BREAKPOINT_STATE_CORRECT = "Breakpoint state is correct" |
| |
| BREAKPOINT_PENDING_CREATED = "Pending breakpoint created successfully" |
| |
| BREAKPOINT_HIT_ONCE = "Breakpoint resolved with hit cout = 1" |
| |
| BREAKPOINT_HIT_TWICE = "Breakpoint resolved with hit cout = 2" |
| |
| BREAKPOINT_HIT_THRICE = "Breakpoint resolved with hit cout = 3" |
| |
| OBJECT_PRINTED_CORRECTLY = "Object printed correctly" |
| |
| SOURCE_DISPLAYED_CORRECTLY = "Source code displayed correctly" |
| |
| STEP_OUT_SUCCEEDED = "Thread step-out succeeded" |
| |
| STOPPED_DUE_TO_EXC_BAD_ACCESS = "Process should be stopped due to bad access exception" |
| |
| STOPPED_DUE_TO_BREAKPOINT = "Process should be stopped due to breakpoint" |
| |
| STOPPED_DUE_TO_BREAKPOINT_WITH_STOP_REASON_AS = "%s, %s" % ( |
| STOPPED_DUE_TO_BREAKPOINT, "instead, the actual stop reason is: '%s'") |
| |
| STOPPED_DUE_TO_BREAKPOINT_CONDITION = "Stopped due to breakpoint condition" |
| |
| STOPPED_DUE_TO_BREAKPOINT_IGNORE_COUNT = "Stopped due to breakpoint and ignore count" |
| |
| STOPPED_DUE_TO_SIGNAL = "Process state is stopped due to signal" |
| |
| STOPPED_DUE_TO_STEP_IN = "Process state is stopped due to step in" |
| |
| DATA_TYPES_DISPLAYED_CORRECTLY = "Data type(s) displayed correctly" |
| |
| VALID_BREAKPOINT = "Got a valid breakpoint" |
| |
| VALID_BREAKPOINT_LOCATION = "Got a valid breakpoint location" |
| |
| VALID_COMMAND_INTERPRETER = "Got a valid command interpreter" |
| |
| VALID_FILESPEC = "Got a valid filespec" |
| |
| VALID_MODULE = "Got a valid module" |
| |
| VALID_PROCESS = "Got a valid process" |
| |
| VALID_SYMBOL = "Got a valid symbol" |
| |
| VALID_TARGET = "Got a valid target" |
| |
| VARIABLES_DISPLAYED_CORRECTLY = "Variable(s) displayed correctly" |
| |
| |
| def CMD_MSG(str): |
| '''A generic "Command '%s' returns successfully" message generator.''' |
| return "Command '%s' returns successfully" % str |
| |
| def EXP_MSG(str, exe): |
| '''A generic "'%s' returns expected result" message generator if exe. |
| Otherwise, it generates "'%s' matches expected result" message.''' |
| return "'%s' %s expected result" % (str, 'returns' if exe else 'matches') |
| |
| def SETTING_MSG(setting): |
| '''A generic "Value of setting '%s' is correct" message generator.''' |
| return "Value of setting '%s' is correct" % setting |
| |
| def EnvArray(): |
| """Returns an env variable array from the os.environ map object.""" |
| return map(lambda k,v: k+"="+v, os.environ.keys(), os.environ.values()) |
| |
| def line_number(filename, string_to_match): |
| """Helper function to return the line number of the first matched string.""" |
| with open(filename, 'r') as f: |
| for i, line in enumerate(f): |
| if line.find(string_to_match) != -1: |
| # Found our match. |
| return i+1 |
| raise Exception("Unable to find '%s' within file %s" % (string_to_match, filename)) |
| |
| def pointer_size(): |
| """Return the pointer size of the host system.""" |
| import ctypes |
| a_pointer = ctypes.c_void_p(0xffff) |
| return 8 * ctypes.sizeof(a_pointer) |
| |
| from functools import wraps |
| def python_api_test(func): |
| """Decorate the item as a Python API only test.""" |
| if isinstance(func, type) and issubclass(func, unittest2.TestCase): |
| raise Exception("@python_api_test can only be used to decorate a test method") |
| @wraps(func) |
| def wrapper(self, *args, **kwargs): |
| try: |
| if lldb.dont_do_python_api_test: |
| self.skipTest("Skip Python API tests") |
| except AttributeError: |
| pass |
| return func(self, *args, **kwargs) |
| |
| # Mark this function as such to separate them from lldb command line tests. |
| wrapper.__python_api_test__ = True |
| return wrapper |
| |
| class recording(StringIO.StringIO): |
| """ |
| A nice little context manager for recording the debugger interactions into |
| our session object. If trace flag is ON, it also emits the interactions |
| into the stderr. |
| """ |
| def __init__(self, test, trace): |
| """Create a StringIO instance; record the session obj and trace flag.""" |
| StringIO.StringIO.__init__(self) |
| self.session = test.session if test else None |
| self.trace = trace |
| |
| def __enter__(self): |
| """ |
| Context management protocol on entry to the body of the with statement. |
| Just return the StringIO object. |
| """ |
| return self |
| |
| def __exit__(self, type, value, tb): |
| """ |
| Context management protocol on exit from the body of the with statement. |
| If trace is ON, it emits the recordings into stderr. Always add the |
| recordings to our session object. And close the StringIO object, too. |
| """ |
| if self.trace: |
| print >> sys.stderr, self.getvalue() |
| if self.session: |
| print >> self.session, self.getvalue() |
| self.close() |
| |
| # From 2.7's subprocess.check_output() convenience function. |
| # Return a tuple (stdoutdata, stderrdata). |
| def system(*popenargs, **kwargs): |
| r"""Run command with arguments and return its output as a byte string. |
| |
| If the exit code was non-zero it raises a CalledProcessError. The |
| CalledProcessError object will have the return code in the returncode |
| attribute and output in the output attribute. |
| |
| The arguments are the same as for the Popen constructor. Example: |
| |
| >>> check_output(["ls", "-l", "/dev/null"]) |
| 'crw-rw-rw- 1 root root 1, 3 Oct 18 2007 /dev/null\n' |
| |
| The stdout argument is not allowed as it is used internally. |
| To capture standard error in the result, use stderr=STDOUT. |
| |
| >>> check_output(["/bin/sh", "-c", |
| ... "ls -l non_existent_file ; exit 0"], |
| ... stderr=STDOUT) |
| 'ls: non_existent_file: No such file or directory\n' |
| """ |
| |
| # Assign the sender object to variable 'test' and remove it from kwargs. |
| test = kwargs.pop('sender', None) |
| |
| if 'stdout' in kwargs: |
| raise ValueError('stdout argument not allowed, it will be overridden.') |
| process = Popen(stdout=PIPE, stderr=PIPE, *popenargs, **kwargs) |
| output, error = process.communicate() |
| retcode = process.poll() |
| |
| with recording(test, traceAlways) as sbuf: |
| if isinstance(popenargs, types.StringTypes): |
| args = [popenargs] |
| else: |
| args = list(popenargs) |
| print >> sbuf |
| print >> sbuf, "os command:", args |
| print >> sbuf, "stdout:", output |
| print >> sbuf, "stderr:", error |
| print >> sbuf, "retcode:", retcode |
| print >> sbuf |
| |
| if retcode: |
| cmd = kwargs.get("args") |
| if cmd is None: |
| cmd = popenargs[0] |
| raise CalledProcessError(retcode, cmd) |
| return (output, error) |
| |
| def getsource_if_available(obj): |
| """ |
| Return the text of the source code for an object if available. Otherwise, |
| a print representation is returned. |
| """ |
| import inspect |
| try: |
| return inspect.getsource(obj) |
| except: |
| return repr(obj) |
| |
| def builder_module(): |
| return __import__("builder_" + sys.platform) |
| |
| class TestBase(unittest2.TestCase): |
| """ |
| This abstract base class is meant to be subclassed. It provides default |
| implementations for setUpClass(), tearDownClass(), setUp(), and tearDown(), |
| among other things. |
| |
| Important things for test class writers: |
| |
| - Overwrite the mydir class attribute, otherwise your test class won't |
| run. It specifies the relative directory to the top level 'test' so |
| the test harness can change to the correct working directory before |
| running your test. |
| |
| - The setUp method sets up things to facilitate subsequent interactions |
| with the debugger as part of the test. These include: |
| - populate the test method name |
| - create/get a debugger set with synchronous mode (self.dbg) |
| - get the command interpreter from with the debugger (self.ci) |
| - create a result object for use with the command interpreter |
| (self.res) |
| - plus other stuffs |
| |
| - The tearDown method tries to perform some necessary cleanup on behalf |
| of the test to return the debugger to a good state for the next test. |
| These include: |
| - execute any tearDown hooks registered by the test method with |
| TestBase.addTearDownHook(); examples can be found in |
| settings/TestSettings.py |
| - kill the inferior process associated with each target, if any, |
| and, then delete the target from the debugger's target list |
| - perform build cleanup before running the next test method in the |
| same test class; examples of registering for this service can be |
| found in types/TestIntegerTypes.py with the call: |
| - self.setTearDownCleanup(dictionary=d) |
| |
| - Similarly setUpClass and tearDownClass perform classwise setup and |
| teardown fixtures. The tearDownClass method invokes a default build |
| cleanup for the entire test class; also, subclasses can implement the |
| classmethod classCleanup(cls) to perform special class cleanup action. |
| |
| - The instance methods runCmd and expect are used heavily by existing |
| test cases to send a command to the command interpreter and to perform |
| string/pattern matching on the output of such command execution. The |
| expect method also provides a mode to peform string/pattern matching |
| without running a command. |
| |
| - The build methods buildDefault, buildDsym, and buildDwarf are used to |
| build the binaries used during a particular test scenario. A plugin |
| should be provided for the sys.platform running the test suite. The |
| Mac OS X implementation is located in plugins/darwin.py. |
| """ |
| |
| @classmethod |
| def skipLongRunningTest(cls): |
| """ |
| By default, we skip long running test case. |
| This can be overridden by passing '-l' to the test driver (dotest.py). |
| """ |
| if "LLDB_SKIP_LONG_RUNNING_TEST" in os.environ and "NO" == os.environ["LLDB_SKIP_LONG_RUNNING_TEST"]: |
| return False |
| else: |
| return True |
| |
| # The concrete subclass should override this attribute. |
| mydir = None |
| |
| # Maximum allowed attempts when launching the inferior process. |
| # Can be overridden by the LLDB_MAX_LAUNCH_COUNT environment variable. |
| maxLaunchCount = 3; |
| |
| # Time to wait before the next launching attempt in second(s). |
| # Can be overridden by the LLDB_TIME_WAIT_NEXT_LAUNCH environment variable. |
| timeWaitNextLaunch = 1.0; |
| |
| # Keep track of the old current working directory. |
| oldcwd = None |
| |
| @classmethod |
| def setUpClass(cls): |
| """ |
| Python unittest framework class setup fixture. |
| Do current directory manipulation. |
| """ |
| |
| # Fail fast if 'mydir' attribute is not overridden. |
| if not cls.mydir or len(cls.mydir) == 0: |
| raise Exception("Subclasses must override the 'mydir' attribute.") |
| # Save old working directory. |
| cls.oldcwd = os.getcwd() |
| |
| # Change current working directory if ${LLDB_TEST} is defined. |
| # See also dotest.py which sets up ${LLDB_TEST}. |
| if ("LLDB_TEST" in os.environ): |
| if traceAlways: |
| print >> sys.stderr, "Change dir to:", os.path.join(os.environ["LLDB_TEST"], cls.mydir) |
| os.chdir(os.path.join(os.environ["LLDB_TEST"], cls.mydir)) |
| |
| @classmethod |
| def tearDownClass(cls): |
| """ |
| Python unittest framework class teardown fixture. |
| Do class-wide cleanup. |
| """ |
| |
| if doCleanup: |
| # First, let's do the platform-specific cleanup. |
| module = builder_module() |
| if not module.cleanup(): |
| raise Exception("Don't know how to do cleanup") |
| |
| # Subclass might have specific cleanup function defined. |
| if getattr(cls, "classCleanup", None): |
| if traceAlways: |
| print >> sys.stderr, "Call class-specific cleanup function for class:", cls |
| try: |
| cls.classCleanup() |
| except: |
| exc_type, exc_value, exc_tb = sys.exc_info() |
| traceback.print_exception(exc_type, exc_value, exc_tb) |
| |
| # Restore old working directory. |
| if traceAlways: |
| print >> sys.stderr, "Restore dir to:", cls.oldcwd |
| os.chdir(cls.oldcwd) |
| |
| def doDelay(self): |
| """See option -w of dotest.py.""" |
| if ("LLDB_WAIT_BETWEEN_TEST_CASES" in os.environ and |
| os.environ["LLDB_WAIT_BETWEEN_TEST_CASES"] == 'YES'): |
| waitTime = 1.0 |
| if "LLDB_TIME_WAIT_BETWEEN_TEST_CASES" in os.environ: |
| waitTime = float(os.environ["LLDB_TIME_WAIT_BETWEEN_TEST_CASES"]) |
| time.sleep(waitTime) |
| |
| def setUp(self): |
| #import traceback |
| #traceback.print_stack() |
| |
| # Assign the test method name to self.testMethodName. |
| # |
| # For an example of the use of this attribute, look at test/types dir. |
| # There are a bunch of test cases under test/types and we don't want the |
| # module cacheing subsystem to be confused with executable name "a.out" |
| # used for all the test cases. |
| self.testMethodName = self._testMethodName |
| |
| if "LLDB_EXEC" in os.environ: |
| self.lldbExec = os.environ["LLDB_EXEC"] |
| |
| try: |
| if lldb.blacklist: |
| className = self.__class__.__name__ |
| classAndMethodName = "%s.%s" % (className, self._testMethodName) |
| if className in lldb.blacklist: |
| self.skipTest(lldb.blacklist.get(className)) |
| elif classAndMethodName in lldb.blacklist: |
| self.skipTest(lldb.blacklist.get(classAndMethodName)) |
| except AttributeError: |
| pass |
| |
| # Python API only test is decorated with @python_api_test, |
| # which also sets the "__python_api_test__" attribute of the |
| # function object to True. |
| try: |
| if lldb.just_do_python_api_test: |
| testMethod = getattr(self, self._testMethodName) |
| if getattr(testMethod, "__python_api_test__", False): |
| pass |
| else: |
| self.skipTest("Skip lldb command line test") |
| except AttributeError: |
| pass |
| |
| # Insert some delay between successive test cases if specified. |
| self.doDelay() |
| |
| if "LLDB_MAX_LAUNCH_COUNT" in os.environ: |
| self.maxLaunchCount = int(os.environ["LLDB_MAX_LAUNCH_COUNT"]) |
| |
| if "LLDB_TIME_WAIT_NEXT_LAUNCH" in os.environ: |
| self.timeWaitNextLaunch = float(os.environ["LLDB_TIME_WAIT_NEXT_LAUNCH"]) |
| |
| # Create the debugger instance if necessary. |
| try: |
| self.dbg = lldb.DBG |
| except AttributeError: |
| self.dbg = lldb.SBDebugger.Create() |
| |
| if not self.dbg: |
| raise Exception('Invalid debugger instance') |
| |
| # We want our debugger to be synchronous. |
| self.dbg.SetAsync(False) |
| |
| # This is for the case of directly spawning 'lldb' and interacting with |
| # it using pexpect. |
| self.child = None |
| # If the child is interacting with the embedded script interpreter, |
| # there are two exits required during tear down, first to quit the |
| # embedded script interpreter and second to quit the lldb command |
| # interpreter. |
| self.child_in_script_interpreter = False |
| |
| # Retrieve the associated command interpreter instance. |
| self.ci = self.dbg.GetCommandInterpreter() |
| if not self.ci: |
| raise Exception('Could not get the command interpreter') |
| |
| # And the result object. |
| self.res = lldb.SBCommandReturnObject() |
| |
| # These are for customized teardown cleanup. |
| self.dict = None |
| self.doTearDownCleanup = False |
| # And in rare cases where there are multiple teardown cleanups. |
| self.dicts = [] |
| self.doTearDownCleanups = False |
| |
| # Create a string buffer to record the session info, to be dumped into a |
| # test case specific file if test failure is encountered. |
| self.session = StringIO.StringIO() |
| |
| # Optimistically set __errored__, __failed__, __expected__ to False |
| # initially. If the test errored/failed, the session info |
| # (self.session) is then dumped into a session specific file for |
| # diagnosis. |
| self.__errored__ = False |
| self.__failed__ = False |
| self.__expected__ = False |
| # We are also interested in unexpected success. |
| self.__unexpected__ = False |
| |
| # See addTearDownHook(self, hook) which allows the client to add a hook |
| # function to be run during tearDown() time. |
| self.hooks = [] |
| |
| # See HideStdout(self). |
| self.sys_stdout_hidden = False |
| |
| def markError(self): |
| """Callback invoked when an error (unexpected exception) errored.""" |
| self.__errored__ = True |
| with recording(self, False) as sbuf: |
| # False because there's no need to write "ERROR" to the stderr twice. |
| # Once by the Python unittest framework, and a second time by us. |
| print >> sbuf, "ERROR" |
| |
| def markFailure(self): |
| """Callback invoked when a failure (test assertion failure) occurred.""" |
| self.__failed__ = True |
| with recording(self, False) as sbuf: |
| # False because there's no need to write "FAIL" to the stderr twice. |
| # Once by the Python unittest framework, and a second time by us. |
| print >> sbuf, "FAIL" |
| |
| def markExpectedFailure(self): |
| """Callback invoked when an expected failure/error occurred.""" |
| self.__expected__ = True |
| with recording(self, False) as sbuf: |
| # False because there's no need to write "expected failure" to the |
| # stderr twice. |
| # Once by the Python unittest framework, and a second time by us. |
| print >> sbuf, "expected failure" |
| |
| def markUnexpectedSuccess(self): |
| """Callback invoked when an unexpected success occurred.""" |
| self.__unexpected__ = True |
| with recording(self, False) as sbuf: |
| # False because there's no need to write "unexpected success" to the |
| # stderr twice. |
| # Once by the Python unittest framework, and a second time by us. |
| print >> sbuf, "unexpected success" |
| |
| def dumpSessionInfo(self): |
| """ |
| Dump the debugger interactions leading to a test error/failure. This |
| allows for more convenient postmortem analysis. |
| |
| See also LLDBTestResult (dotest.py) which is a singlton class derived |
| from TextTestResult and overwrites addError, addFailure, and |
| addExpectedFailure methods to allow us to to mark the test instance as |
| such. |
| """ |
| |
| # We are here because self.tearDown() detected that this test instance |
| # either errored or failed. The lldb.test_result singleton contains |
| # two lists (erros and failures) which get populated by the unittest |
| # framework. Look over there for stack trace information. |
| # |
| # The lists contain 2-tuples of TestCase instances and strings holding |
| # formatted tracebacks. |
| # |
| # See http://docs.python.org/library/unittest.html#unittest.TestResult. |
| if self.__errored__: |
| pairs = lldb.test_result.errors |
| prefix = 'Error' |
| elif self.__failed__: |
| pairs = lldb.test_result.failures |
| prefix = 'Failure' |
| elif self.__expected__: |
| pairs = lldb.test_result.expectedFailures |
| prefix = 'ExpectedFailure' |
| elif self.__unexpected__: |
| prefix = "UnexpectedSuccess" |
| else: |
| # Simply return, there's no session info to dump! |
| return |
| |
| if not self.__unexpected__: |
| for test, traceback in pairs: |
| if test is self: |
| print >> self.session, traceback |
| |
| dname = os.path.join(os.environ["LLDB_TEST"], |
| os.environ["LLDB_SESSION_DIRNAME"]) |
| if not os.path.isdir(dname): |
| os.mkdir(dname) |
| fname = os.path.join(dname, "%s-%s.log" % (prefix, self.id())) |
| with open(fname, "w") as f: |
| import datetime |
| print >> f, "Session info generated @", datetime.datetime.now().ctime() |
| print >> f, self.session.getvalue() |
| print >> f, "To rerun this test, issue the following command from the 'test' directory:\n" |
| print >> f, "./dotest.py %s -v -t -f %s.%s" % (self.getRunOptions(), |
| self.__class__.__name__, |
| self._testMethodName) |
| |
| def setTearDownCleanup(self, dictionary=None): |
| """Register a cleanup action at tearDown() time with a dictinary""" |
| self.dict = dictionary |
| self.doTearDownCleanup = True |
| |
| def addTearDownCleanup(self, dictionary): |
| """Add a cleanup action at tearDown() time with a dictinary""" |
| self.dicts.append(dictionary) |
| self.doTearDownCleanups = True |
| |
| def addTearDownHook(self, hook): |
| """ |
| Add a function to be run during tearDown() time. |
| |
| Hooks are executed in a first come first serve manner. |
| """ |
| if callable(hook): |
| with recording(self, traceAlways) as sbuf: |
| print >> sbuf, "Adding tearDown hook:", getsource_if_available(hook) |
| self.hooks.append(hook) |
| |
| def tearDown(self): |
| #import traceback |
| #traceback.print_stack() |
| |
| # Check and run any hook functions. |
| for hook in reversed(self.hooks): |
| with recording(self, traceAlways) as sbuf: |
| print >> sbuf, "Executing tearDown hook:", getsource_if_available(hook) |
| hook() |
| |
| # This is for the case of directly spawning 'lldb' and interacting with it |
| # using pexpect. |
| import pexpect |
| if self.child and self.child.isalive(): |
| with recording(self, traceAlways) as sbuf: |
| print >> sbuf, "tearing down the child process...." |
| if self.child_in_script_interpreter: |
| self.child.sendline('quit()') |
| self.child.expect_exact('(lldb) ') |
| self.child.sendline('quit') |
| try: |
| self.child.expect(pexpect.EOF) |
| except: |
| pass |
| |
| # Delete the target(s) from the debugger as a general cleanup step. |
| # This includes terminating the process for each target, if any. |
| # We'd like to reuse the debugger for our next test without incurring |
| # the initialization overhead. |
| targets = [] |
| for target in self.dbg: |
| if target: |
| targets.append(target) |
| process = target.GetProcess() |
| if process: |
| rc = self.invoke(process, "Kill") |
| self.assertTrue(rc.Success(), PROCESS_KILLED) |
| for target in targets: |
| self.dbg.DeleteTarget(target) |
| |
| del self.dbg |
| del self.hooks |
| |
| # Perform registered teardown cleanup. |
| if doCleanup and self.doTearDownCleanup: |
| module = builder_module() |
| if not module.cleanup(self, dictionary=self.dict): |
| raise Exception("Don't know how to do cleanup with dictionary: " + self.dict) |
| |
| # In rare cases where there are multiple teardown cleanups added. |
| if doCleanup and self.doTearDownCleanups: |
| module = builder_module() |
| if self.dicts: |
| for dict in reversed(self.dicts): |
| if not module.cleanup(self, dictionary=dict): |
| raise Exception("Don't know how to do cleanup with dictionary: " + dict) |
| |
| # Decide whether to dump the session info. |
| self.dumpSessionInfo() |
| |
| def runCmd(self, cmd, msg=None, check=True, trace=False): |
| """ |
| Ask the command interpreter to handle the command and then check its |
| return status. |
| """ |
| # Fail fast if 'cmd' is not meaningful. |
| if not cmd or len(cmd) == 0: |
| raise Exception("Bad 'cmd' parameter encountered") |
| |
| trace = (True if traceAlways else trace) |
| |
| running = (cmd.startswith("run") or cmd.startswith("process launch")) |
| |
| for i in range(self.maxLaunchCount if running else 1): |
| self.ci.HandleCommand(cmd, self.res) |
| |
| with recording(self, trace) as sbuf: |
| print >> sbuf, "runCmd:", cmd |
| if not check: |
| print >> sbuf, "check of return status not required" |
| if self.res.Succeeded(): |
| print >> sbuf, "output:", self.res.GetOutput() |
| else: |
| print >> sbuf, "runCmd failed!" |
| print >> sbuf, self.res.GetError() |
| |
| if self.res.Succeeded(): |
| break |
| elif running: |
| # For process launch, wait some time before possible next try. |
| time.sleep(self.timeWaitNextLaunch) |
| with recording(self, True) as sbuf: |
| print >> sbuf, "Command '" + cmd + "' failed!" |
| |
| if check: |
| self.assertTrue(self.res.Succeeded(), |
| msg if msg else CMD_MSG(cmd)) |
| |
| def expect(self, str, msg=None, patterns=None, startstr=None, substrs=None, trace=False, error=False, matching=True, exe=True): |
| """ |
| Similar to runCmd; with additional expect style output matching ability. |
| |
| Ask the command interpreter to handle the command and then check its |
| return status. The 'msg' parameter specifies an informational assert |
| message. We expect the output from running the command to start with |
| 'startstr', matches the substrings contained in 'substrs', and regexp |
| matches the patterns contained in 'patterns'. |
| |
| If the keyword argument error is set to True, it signifies that the API |
| client is expecting the command to fail. In this case, the error stream |
| from running the command is retrieved and compared against the golden |
| input, instead. |
| |
| If the keyword argument matching is set to False, it signifies that the API |
| client is expecting the output of the command not to match the golden |
| input. |
| |
| Finally, the required argument 'str' represents the lldb command to be |
| sent to the command interpreter. In case the keyword argument 'exe' is |
| set to False, the 'str' is treated as a string to be matched/not-matched |
| against the golden input. |
| """ |
| trace = (True if traceAlways else trace) |
| |
| if exe: |
| # First run the command. If we are expecting error, set check=False. |
| # Pass the assert message along since it provides more semantic info. |
| self.runCmd(str, msg=msg, trace = (True if trace else False), check = not error) |
| |
| # Then compare the output against expected strings. |
| output = self.res.GetError() if error else self.res.GetOutput() |
| |
| # If error is True, the API client expects the command to fail! |
| if error: |
| self.assertFalse(self.res.Succeeded(), |
| "Command '" + str + "' is expected to fail!") |
| else: |
| # No execution required, just compare str against the golden input. |
| output = str |
| with recording(self, trace) as sbuf: |
| print >> sbuf, "looking at:", output |
| |
| # The heading says either "Expecting" or "Not expecting". |
| heading = "Expecting" if matching else "Not expecting" |
| |
| # Start from the startstr, if specified. |
| # If there's no startstr, set the initial state appropriately. |
| matched = output.startswith(startstr) if startstr else (True if matching else False) |
| |
| if startstr: |
| with recording(self, trace) as sbuf: |
| print >> sbuf, "%s start string: %s" % (heading, startstr) |
| print >> sbuf, "Matched" if matched else "Not matched" |
| |
| # Look for sub strings, if specified. |
| keepgoing = matched if matching else not matched |
| if substrs and keepgoing: |
| for str in substrs: |
| matched = output.find(str) != -1 |
| with recording(self, trace) as sbuf: |
| print >> sbuf, "%s sub string: %s" % (heading, str) |
| print >> sbuf, "Matched" if matched else "Not matched" |
| keepgoing = matched if matching else not matched |
| if not keepgoing: |
| break |
| |
| # Search for regular expression patterns, if specified. |
| keepgoing = matched if matching else not matched |
| if patterns and keepgoing: |
| for pattern in patterns: |
| # Match Objects always have a boolean value of True. |
| matched = bool(re.search(pattern, output)) |
| with recording(self, trace) as sbuf: |
| print >> sbuf, "%s pattern: %s" % (heading, pattern) |
| print >> sbuf, "Matched" if matched else "Not matched" |
| keepgoing = matched if matching else not matched |
| if not keepgoing: |
| break |
| |
| self.assertTrue(matched if matching else not matched, |
| msg if msg else EXP_MSG(str, exe)) |
| |
| def invoke(self, obj, name, trace=False): |
| """Use reflection to call a method dynamically with no argument.""" |
| trace = (True if traceAlways else trace) |
| |
| method = getattr(obj, name) |
| import inspect |
| self.assertTrue(inspect.ismethod(method), |
| name + "is a method name of object: " + str(obj)) |
| result = method() |
| with recording(self, trace) as sbuf: |
| print >> sbuf, str(method) + ":", result |
| return result |
| |
| # ==================================================== |
| # Config. methods supported through a plugin interface |
| # (enables reading of the current test configuration) |
| # ==================================================== |
| |
| def getArchitecture(self): |
| """Returns the architecture in effect the test suite is running with.""" |
| module = builder_module() |
| return module.getArchitecture() |
| |
| def getCompiler(self): |
| """Returns the compiler in effect the test suite is running with.""" |
| module = builder_module() |
| return module.getCompiler() |
| |
| def getRunOptions(self): |
| """Command line option for -A and -C to run this test again, called from |
| self.dumpSessionInfo().""" |
| arch = self.getArchitecture() |
| comp = self.getCompiler() |
| if not arch and not comp: |
| return "" |
| else: |
| return "%s %s" % ("-A "+arch if arch else "", |
| "-C "+comp if comp else "") |
| |
| # ================================================== |
| # Build methods supported through a plugin interface |
| # ================================================== |
| |
| def buildDefault(self, architecture=None, compiler=None, dictionary=None): |
| """Platform specific way to build the default binaries.""" |
| module = builder_module() |
| if not module.buildDefault(self, architecture, compiler, dictionary): |
| raise Exception("Don't know how to build default binary") |
| |
| def buildDsym(self, architecture=None, compiler=None, dictionary=None): |
| """Platform specific way to build binaries with dsym info.""" |
| module = builder_module() |
| if not module.buildDsym(self, architecture, compiler, dictionary): |
| raise Exception("Don't know how to build binary with dsym") |
| |
| def buildDwarf(self, architecture=None, compiler=None, dictionary=None): |
| """Platform specific way to build binaries with dwarf maps.""" |
| module = builder_module() |
| if not module.buildDwarf(self, architecture, compiler, dictionary): |
| raise Exception("Don't know how to build binary with dwarf") |
| |
| # ================================================= |
| # Misc. helper methods for debugging test execution |
| # ================================================= |
| |
| def DebugSBValue(self, frame, val): |
| """Debug print a SBValue object, if traceAlways is True.""" |
| from lldbutil import value_type_to_str |
| |
| if not traceAlways: |
| return |
| |
| err = sys.stderr |
| err.write(val.GetName() + ":\n") |
| err.write('\t' + "TypeName -> " + val.GetTypeName() + '\n') |
| err.write('\t' + "ByteSize -> " + str(val.GetByteSize()) + '\n') |
| err.write('\t' + "NumChildren -> " + str(val.GetNumChildren()) + '\n') |
| err.write('\t' + "Value -> " + str(val.GetValue(frame)) + '\n') |
| err.write('\t' + "ValueType -> " + value_type_to_str(val.GetValueType()) + '\n') |
| err.write('\t' + "Summary -> " + str(val.GetSummary(frame)) + '\n') |
| err.write('\t' + "IsPointerType -> " + str(val.TypeIsPointerType()) + '\n') |
| err.write('\t' + "Location -> " + val.GetLocation(frame) + '\n') |
| |
| def DebugPExpect(self, child): |
| """Debug the spwaned pexpect object.""" |
| if not traceAlways: |
| return |
| |
| print child |
| |
| def TraceOn(self): |
| """Returns True if we are in trace mode (i.e., tracing lldb command execution).""" |
| return traceAlways |
| |
| def HideStdout(self): |
| """Hide output to stdout from the user. |
| |
| During test execution, there might be cases where we don't want to show the |
| standard output to the user. For example, |
| |
| self.runCmd(r'''sc print "\n\n\tHello!\n"''') |
| |
| tests whether command abbreviation for 'script' works or not. There is no |
| need to show the 'Hello' output to the user as long as the 'script' command |
| succeeds and we are not in TraceOn() mode (see the '-t' option). |
| |
| In this case, the test method calls self.HideStdout(self) to redirect the |
| sys.stdout to a null device, and restores the sys.stdout upon teardown. |
| |
| Note that you should only call this method at most once during a test case |
| execution. Any subsequent call has no effect at all.""" |
| if self.sys_stdout_hidden: |
| return |
| |
| self.sys_stdout_hidden = True |
| old_stdout = sys.stdout |
| sys.stdout = open(os.devnull, 'w') |
| def restore_stdout(): |
| sys.stdout = old_stdout |
| self.addTearDownHook(restore_stdout) |