| //===- X86ISelDAGToDAG.cpp - A DAG pattern matching inst selector for X86 -===// |
| // |
| // The LLVM Compiler Infrastructure |
| // |
| // This file was developed by the Evan Cheng and is distributed under |
| // the University of Illinois Open Source License. See LICENSE.TXT for details. |
| // |
| //===----------------------------------------------------------------------===// |
| // |
| // This file defines a DAG pattern matching instruction selector for X86, |
| // converting from a legalized dag to a X86 dag. |
| // |
| //===----------------------------------------------------------------------===// |
| |
| #define DEBUG_TYPE "x86-isel" |
| #include "X86.h" |
| #include "X86InstrBuilder.h" |
| #include "X86ISelLowering.h" |
| #include "X86RegisterInfo.h" |
| #include "X86Subtarget.h" |
| #include "X86TargetMachine.h" |
| #include "llvm/GlobalValue.h" |
| #include "llvm/Instructions.h" |
| #include "llvm/Intrinsics.h" |
| #include "llvm/Support/CFG.h" |
| #include "llvm/Type.h" |
| #include "llvm/CodeGen/MachineConstantPool.h" |
| #include "llvm/CodeGen/MachineFunction.h" |
| #include "llvm/CodeGen/MachineFrameInfo.h" |
| #include "llvm/CodeGen/MachineInstrBuilder.h" |
| #include "llvm/CodeGen/SSARegMap.h" |
| #include "llvm/CodeGen/SelectionDAGISel.h" |
| #include "llvm/Target/TargetMachine.h" |
| #include "llvm/Support/Compiler.h" |
| #include "llvm/Support/Debug.h" |
| #include "llvm/Support/MathExtras.h" |
| #include "llvm/ADT/Statistic.h" |
| #include <queue> |
| #include <set> |
| using namespace llvm; |
| |
| STATISTIC(NumFPKill , "Number of FP_REG_KILL instructions added"); |
| STATISTIC(NumLoadMoved, "Number of loads moved below TokenFactor"); |
| |
| |
| //===----------------------------------------------------------------------===// |
| // Pattern Matcher Implementation |
| //===----------------------------------------------------------------------===// |
| |
| namespace { |
| /// X86ISelAddressMode - This corresponds to X86AddressMode, but uses |
| /// SDOperand's instead of register numbers for the leaves of the matched |
| /// tree. |
| struct X86ISelAddressMode { |
| enum { |
| RegBase, |
| FrameIndexBase |
| } BaseType; |
| |
| struct { // This is really a union, discriminated by BaseType! |
| SDOperand Reg; |
| int FrameIndex; |
| } Base; |
| |
| bool isRIPRel; // RIP relative? |
| unsigned Scale; |
| SDOperand IndexReg; |
| unsigned Disp; |
| GlobalValue *GV; |
| Constant *CP; |
| const char *ES; |
| int JT; |
| unsigned Align; // CP alignment. |
| |
| X86ISelAddressMode() |
| : BaseType(RegBase), isRIPRel(false), Scale(1), IndexReg(), Disp(0), |
| GV(0), CP(0), ES(0), JT(-1), Align(0) { |
| } |
| }; |
| } |
| |
| namespace { |
| //===--------------------------------------------------------------------===// |
| /// ISel - X86 specific code to select X86 machine instructions for |
| /// SelectionDAG operations. |
| /// |
| class VISIBILITY_HIDDEN X86DAGToDAGISel : public SelectionDAGISel { |
| /// ContainsFPCode - Every instruction we select that uses or defines a FP |
| /// register should set this to true. |
| bool ContainsFPCode; |
| |
| /// FastISel - Enable fast(er) instruction selection. |
| /// |
| bool FastISel; |
| |
| /// TM - Keep a reference to X86TargetMachine. |
| /// |
| X86TargetMachine &TM; |
| |
| /// X86Lowering - This object fully describes how to lower LLVM code to an |
| /// X86-specific SelectionDAG. |
| X86TargetLowering X86Lowering; |
| |
| /// Subtarget - Keep a pointer to the X86Subtarget around so that we can |
| /// make the right decision when generating code for different targets. |
| const X86Subtarget *Subtarget; |
| |
| /// GlobalBaseReg - keeps track of the virtual register mapped onto global |
| /// base register. |
| unsigned GlobalBaseReg; |
| |
| public: |
| X86DAGToDAGISel(X86TargetMachine &tm, bool fast) |
| : SelectionDAGISel(X86Lowering), |
| ContainsFPCode(false), FastISel(fast), TM(tm), |
| X86Lowering(*TM.getTargetLowering()), |
| Subtarget(&TM.getSubtarget<X86Subtarget>()) {} |
| |
| virtual bool runOnFunction(Function &Fn) { |
| // Make sure we re-emit a set of the global base reg if necessary |
| GlobalBaseReg = 0; |
| return SelectionDAGISel::runOnFunction(Fn); |
| } |
| |
| virtual const char *getPassName() const { |
| return "X86 DAG->DAG Instruction Selection"; |
| } |
| |
| /// InstructionSelectBasicBlock - This callback is invoked by |
| /// SelectionDAGISel when it has created a SelectionDAG for us to codegen. |
| virtual void InstructionSelectBasicBlock(SelectionDAG &DAG); |
| |
| virtual void EmitFunctionEntryCode(Function &Fn, MachineFunction &MF); |
| |
| virtual bool CanBeFoldedBy(SDNode *N, SDNode *U, SDNode *Root) const; |
| |
| // Include the pieces autogenerated from the target description. |
| #include "X86GenDAGISel.inc" |
| |
| private: |
| SDNode *Select(SDOperand N); |
| |
| bool MatchAddress(SDOperand N, X86ISelAddressMode &AM, |
| bool isRoot = true, unsigned Depth = 0); |
| bool MatchAddressBase(SDOperand N, X86ISelAddressMode &AM, |
| bool isRoot, unsigned Depth); |
| bool SelectAddr(SDOperand Op, SDOperand N, SDOperand &Base, |
| SDOperand &Scale, SDOperand &Index, SDOperand &Disp); |
| bool SelectLEAAddr(SDOperand Op, SDOperand N, SDOperand &Base, |
| SDOperand &Scale, SDOperand &Index, SDOperand &Disp); |
| bool SelectScalarSSELoad(SDOperand Op, SDOperand Pred, |
| SDOperand N, SDOperand &Base, SDOperand &Scale, |
| SDOperand &Index, SDOperand &Disp, |
| SDOperand &InChain, SDOperand &OutChain); |
| bool TryFoldLoad(SDOperand P, SDOperand N, |
| SDOperand &Base, SDOperand &Scale, |
| SDOperand &Index, SDOperand &Disp); |
| void InstructionSelectPreprocess(SelectionDAG &DAG); |
| |
| /// SelectInlineAsmMemoryOperand - Implement addressing mode selection for |
| /// inline asm expressions. |
| virtual bool SelectInlineAsmMemoryOperand(const SDOperand &Op, |
| char ConstraintCode, |
| std::vector<SDOperand> &OutOps, |
| SelectionDAG &DAG); |
| |
| void EmitSpecialCodeForMain(MachineBasicBlock *BB, MachineFrameInfo *MFI); |
| |
| inline void getAddressOperands(X86ISelAddressMode &AM, SDOperand &Base, |
| SDOperand &Scale, SDOperand &Index, |
| SDOperand &Disp) { |
| Base = (AM.BaseType == X86ISelAddressMode::FrameIndexBase) ? |
| CurDAG->getTargetFrameIndex(AM.Base.FrameIndex, TLI.getPointerTy()) : |
| AM.Base.Reg; |
| Scale = getI8Imm(AM.Scale); |
| Index = AM.IndexReg; |
| // These are 32-bit even in 64-bit mode since RIP relative offset |
| // is 32-bit. |
| if (AM.GV) |
| Disp = CurDAG->getTargetGlobalAddress(AM.GV, MVT::i32, AM.Disp); |
| else if (AM.CP) |
| Disp = CurDAG->getTargetConstantPool(AM.CP, MVT::i32, AM.Align, AM.Disp); |
| else if (AM.ES) |
| Disp = CurDAG->getTargetExternalSymbol(AM.ES, MVT::i32); |
| else if (AM.JT != -1) |
| Disp = CurDAG->getTargetJumpTable(AM.JT, MVT::i32); |
| else |
| Disp = getI32Imm(AM.Disp); |
| } |
| |
| /// getI8Imm - Return a target constant with the specified value, of type |
| /// i8. |
| inline SDOperand getI8Imm(unsigned Imm) { |
| return CurDAG->getTargetConstant(Imm, MVT::i8); |
| } |
| |
| /// getI16Imm - Return a target constant with the specified value, of type |
| /// i16. |
| inline SDOperand getI16Imm(unsigned Imm) { |
| return CurDAG->getTargetConstant(Imm, MVT::i16); |
| } |
| |
| /// getI32Imm - Return a target constant with the specified value, of type |
| /// i32. |
| inline SDOperand getI32Imm(unsigned Imm) { |
| return CurDAG->getTargetConstant(Imm, MVT::i32); |
| } |
| |
| /// getGlobalBaseReg - insert code into the entry mbb to materialize the PIC |
| /// base register. Return the virtual register that holds this value. |
| SDNode *getGlobalBaseReg(); |
| |
| /// getTruncate - return an SDNode that implements a subreg based truncate |
| /// of the specified operand to the the specified value type. |
| SDNode *getTruncate(SDOperand N0, MVT::ValueType VT); |
| |
| #ifndef NDEBUG |
| unsigned Indent; |
| #endif |
| }; |
| } |
| |
| static SDNode *findFlagUse(SDNode *N) { |
| unsigned FlagResNo = N->getNumValues()-1; |
| for (SDNode::use_iterator I = N->use_begin(), E = N->use_end(); I != E; ++I) { |
| SDNode *User = *I; |
| for (unsigned i = 0, e = User->getNumOperands(); i != e; ++i) { |
| SDOperand Op = User->getOperand(i); |
| if (Op.Val == N && Op.ResNo == FlagResNo) |
| return User; |
| } |
| } |
| return NULL; |
| } |
| |
| static void findNonImmUse(SDNode *Use, SDNode* Def, SDNode *ImmedUse, |
| SDNode *Root, SDNode *Skip, bool &found, |
| std::set<SDNode *> &Visited) { |
| if (found || |
| Use->getNodeId() > Def->getNodeId() || |
| !Visited.insert(Use).second) |
| return; |
| |
| for (unsigned i = 0, e = Use->getNumOperands(); !found && i != e; ++i) { |
| SDNode *N = Use->getOperand(i).Val; |
| if (N == Skip) |
| continue; |
| if (N == Def) { |
| if (Use == ImmedUse) |
| continue; // Immediate use is ok. |
| if (Use == Root) { |
| assert(Use->getOpcode() == ISD::STORE || |
| Use->getOpcode() == X86ISD::CMP); |
| continue; |
| } |
| found = true; |
| break; |
| } |
| findNonImmUse(N, Def, ImmedUse, Root, Skip, found, Visited); |
| } |
| } |
| |
| /// isNonImmUse - Start searching from Root up the DAG to check is Def can |
| /// be reached. Return true if that's the case. However, ignore direct uses |
| /// by ImmedUse (which would be U in the example illustrated in |
| /// CanBeFoldedBy) and by Root (which can happen in the store case). |
| /// FIXME: to be really generic, we should allow direct use by any node |
| /// that is being folded. But realisticly since we only fold loads which |
| /// have one non-chain use, we only need to watch out for load/op/store |
| /// and load/op/cmp case where the root (store / cmp) may reach the load via |
| /// its chain operand. |
| static inline bool isNonImmUse(SDNode *Root, SDNode *Def, SDNode *ImmedUse, |
| SDNode *Skip = NULL) { |
| std::set<SDNode *> Visited; |
| bool found = false; |
| findNonImmUse(Root, Def, ImmedUse, Root, Skip, found, Visited); |
| return found; |
| } |
| |
| |
| bool X86DAGToDAGISel::CanBeFoldedBy(SDNode *N, SDNode *U, SDNode *Root) const { |
| if (FastISel) return false; |
| |
| // If U use can somehow reach N through another path then U can't fold N or |
| // it will create a cycle. e.g. In the following diagram, U can reach N |
| // through X. If N is folded into into U, then X is both a predecessor and |
| // a successor of U. |
| // |
| // [ N ] |
| // ^ ^ |
| // | | |
| // / \--- |
| // / [X] |
| // | ^ |
| // [U]--------| |
| |
| if (isNonImmUse(Root, N, U)) |
| return false; |
| |
| // If U produces a flag, then it gets (even more) interesting. Since it |
| // would have been "glued" together with its flag use, we need to check if |
| // it might reach N: |
| // |
| // [ N ] |
| // ^ ^ |
| // | | |
| // [U] \-- |
| // ^ [TF] |
| // | ^ |
| // | | |
| // \ / |
| // [FU] |
| // |
| // If FU (flag use) indirectly reach N (the load), and U fold N (call it |
| // NU), then TF is a predecessor of FU and a successor of NU. But since |
| // NU and FU are flagged together, this effectively creates a cycle. |
| bool HasFlagUse = false; |
| MVT::ValueType VT = Root->getValueType(Root->getNumValues()-1); |
| while ((VT == MVT::Flag && !Root->use_empty())) { |
| SDNode *FU = findFlagUse(Root); |
| if (FU == NULL) |
| break; |
| else { |
| Root = FU; |
| HasFlagUse = true; |
| } |
| VT = Root->getValueType(Root->getNumValues()-1); |
| } |
| |
| if (HasFlagUse) |
| return !isNonImmUse(Root, N, Root, U); |
| return true; |
| } |
| |
| /// MoveBelowTokenFactor - Replace TokenFactor operand with load's chain operand |
| /// and move load below the TokenFactor. Replace store's chain operand with |
| /// load's chain result. |
| static void MoveBelowTokenFactor(SelectionDAG &DAG, SDOperand Load, |
| SDOperand Store, SDOperand TF) { |
| std::vector<SDOperand> Ops; |
| for (unsigned i = 0, e = TF.Val->getNumOperands(); i != e; ++i) |
| if (Load.Val == TF.Val->getOperand(i).Val) |
| Ops.push_back(Load.Val->getOperand(0)); |
| else |
| Ops.push_back(TF.Val->getOperand(i)); |
| DAG.UpdateNodeOperands(TF, &Ops[0], Ops.size()); |
| DAG.UpdateNodeOperands(Load, TF, Load.getOperand(1), Load.getOperand(2)); |
| DAG.UpdateNodeOperands(Store, Load.getValue(1), Store.getOperand(1), |
| Store.getOperand(2), Store.getOperand(3)); |
| } |
| |
| /// InstructionSelectPreprocess - Preprocess the DAG to allow the instruction |
| /// selector to pick more load-modify-store instructions. This is a common |
| /// case: |
| /// |
| /// [Load chain] |
| /// ^ |
| /// | |
| /// [Load] |
| /// ^ ^ |
| /// | | |
| /// / \- |
| /// / | |
| /// [TokenFactor] [Op] |
| /// ^ ^ |
| /// | | |
| /// \ / |
| /// \ / |
| /// [Store] |
| /// |
| /// The fact the store's chain operand != load's chain will prevent the |
| /// (store (op (load))) instruction from being selected. We can transform it to: |
| /// |
| /// [Load chain] |
| /// ^ |
| /// | |
| /// [TokenFactor] |
| /// ^ |
| /// | |
| /// [Load] |
| /// ^ ^ |
| /// | | |
| /// | \- |
| /// | | |
| /// | [Op] |
| /// | ^ |
| /// | | |
| /// \ / |
| /// \ / |
| /// [Store] |
| void X86DAGToDAGISel::InstructionSelectPreprocess(SelectionDAG &DAG) { |
| for (SelectionDAG::allnodes_iterator I = DAG.allnodes_begin(), |
| E = DAG.allnodes_end(); I != E; ++I) { |
| if (!ISD::isNON_TRUNCStore(I)) |
| continue; |
| SDOperand Chain = I->getOperand(0); |
| if (Chain.Val->getOpcode() != ISD::TokenFactor) |
| continue; |
| |
| SDOperand N1 = I->getOperand(1); |
| SDOperand N2 = I->getOperand(2); |
| if (MVT::isFloatingPoint(N1.getValueType()) || |
| MVT::isVector(N1.getValueType()) || |
| !N1.hasOneUse()) |
| continue; |
| |
| bool RModW = false; |
| SDOperand Load; |
| unsigned Opcode = N1.Val->getOpcode(); |
| switch (Opcode) { |
| case ISD::ADD: |
| case ISD::MUL: |
| case ISD::AND: |
| case ISD::OR: |
| case ISD::XOR: |
| case ISD::ADDC: |
| case ISD::ADDE: { |
| SDOperand N10 = N1.getOperand(0); |
| SDOperand N11 = N1.getOperand(1); |
| if (ISD::isNON_EXTLoad(N10.Val)) |
| RModW = true; |
| else if (ISD::isNON_EXTLoad(N11.Val)) { |
| RModW = true; |
| std::swap(N10, N11); |
| } |
| RModW = RModW && N10.Val->isOperand(Chain.Val) && N10.hasOneUse() && |
| (N10.getOperand(1) == N2) && |
| (N10.Val->getValueType(0) == N1.getValueType()); |
| if (RModW) |
| Load = N10; |
| break; |
| } |
| case ISD::SUB: |
| case ISD::SHL: |
| case ISD::SRA: |
| case ISD::SRL: |
| case ISD::ROTL: |
| case ISD::ROTR: |
| case ISD::SUBC: |
| case ISD::SUBE: |
| case X86ISD::SHLD: |
| case X86ISD::SHRD: { |
| SDOperand N10 = N1.getOperand(0); |
| if (ISD::isNON_EXTLoad(N10.Val)) |
| RModW = N10.Val->isOperand(Chain.Val) && N10.hasOneUse() && |
| (N10.getOperand(1) == N2) && |
| (N10.Val->getValueType(0) == N1.getValueType()); |
| if (RModW) |
| Load = N10; |
| break; |
| } |
| } |
| |
| if (RModW) { |
| MoveBelowTokenFactor(DAG, Load, SDOperand(I, 0), Chain); |
| ++NumLoadMoved; |
| } |
| } |
| } |
| |
| /// InstructionSelectBasicBlock - This callback is invoked by SelectionDAGISel |
| /// when it has created a SelectionDAG for us to codegen. |
| void X86DAGToDAGISel::InstructionSelectBasicBlock(SelectionDAG &DAG) { |
| DEBUG(BB->dump()); |
| MachineFunction::iterator FirstMBB = BB; |
| |
| if (!FastISel) |
| InstructionSelectPreprocess(DAG); |
| |
| // Codegen the basic block. |
| #ifndef NDEBUG |
| DOUT << "===== Instruction selection begins:\n"; |
| Indent = 0; |
| #endif |
| DAG.setRoot(SelectRoot(DAG.getRoot())); |
| #ifndef NDEBUG |
| DOUT << "===== Instruction selection ends:\n"; |
| #endif |
| |
| DAG.RemoveDeadNodes(); |
| |
| // Emit machine code to BB. |
| ScheduleAndEmitDAG(DAG); |
| |
| // If we are emitting FP stack code, scan the basic block to determine if this |
| // block defines any FP values. If so, put an FP_REG_KILL instruction before |
| // the terminator of the block. |
| |
| // Note that FP stack instructions *are* used in SSE code for long double, |
| // so we do need this check. |
| bool ContainsFPCode = false; |
| |
| // Scan all of the machine instructions in these MBBs, checking for FP |
| // stores. (RFP32 and RFP64 will not exist in SSE mode, but RFP80 might.) |
| MachineFunction::iterator MBBI = FirstMBB; |
| do { |
| for (MachineBasicBlock::iterator I = MBBI->begin(), E = MBBI->end(); |
| !ContainsFPCode && I != E; ++I) { |
| if (I->getNumOperands() != 0 && I->getOperand(0).isRegister()) { |
| const TargetRegisterClass *clas; |
| for (unsigned op = 0, e = I->getNumOperands(); op != e; ++op) { |
| if (I->getOperand(op).isRegister() && I->getOperand(op).isDef() && |
| MRegisterInfo::isVirtualRegister(I->getOperand(op).getReg()) && |
| ((clas = RegMap->getRegClass(I->getOperand(0).getReg())) == |
| X86::RFP32RegisterClass || |
| clas == X86::RFP64RegisterClass || |
| clas == X86::RFP80RegisterClass)) { |
| ContainsFPCode = true; |
| break; |
| } |
| } |
| } |
| } |
| } while (!ContainsFPCode && &*(MBBI++) != BB); |
| |
| // Check PHI nodes in successor blocks. These PHI's will be lowered to have |
| // a copy of the input value in this block. In SSE mode, we only care about |
| // 80-bit values. |
| if (!ContainsFPCode) { |
| // Final check, check LLVM BB's that are successors to the LLVM BB |
| // corresponding to BB for FP PHI nodes. |
| const BasicBlock *LLVMBB = BB->getBasicBlock(); |
| const PHINode *PN; |
| for (succ_const_iterator SI = succ_begin(LLVMBB), E = succ_end(LLVMBB); |
| !ContainsFPCode && SI != E; ++SI) { |
| for (BasicBlock::const_iterator II = SI->begin(); |
| (PN = dyn_cast<PHINode>(II)); ++II) { |
| if (PN->getType()==Type::X86_FP80Ty || |
| (!Subtarget->hasSSE2() && PN->getType()->isFloatingPoint())) { |
| ContainsFPCode = true; |
| break; |
| } |
| } |
| } |
| } |
| |
| // Finally, if we found any FP code, emit the FP_REG_KILL instruction. |
| if (ContainsFPCode) { |
| BuildMI(*BB, BB->getFirstTerminator(), |
| TM.getInstrInfo()->get(X86::FP_REG_KILL)); |
| ++NumFPKill; |
| } |
| } |
| |
| /// EmitSpecialCodeForMain - Emit any code that needs to be executed only in |
| /// the main function. |
| void X86DAGToDAGISel::EmitSpecialCodeForMain(MachineBasicBlock *BB, |
| MachineFrameInfo *MFI) { |
| const TargetInstrInfo *TII = TM.getInstrInfo(); |
| if (Subtarget->isTargetCygMing()) |
| BuildMI(BB, TII->get(X86::CALLpcrel32)).addExternalSymbol("__main"); |
| |
| // Switch the FPU to 64-bit precision mode for better compatibility and speed. |
| int CWFrameIdx = MFI->CreateStackObject(2, 2); |
| addFrameReference(BuildMI(BB, TII->get(X86::FNSTCW16m)), CWFrameIdx); |
| |
| // Set the high part to be 64-bit precision. |
| addFrameReference(BuildMI(BB, TII->get(X86::MOV8mi)), |
| CWFrameIdx, 1).addImm(2); |
| |
| // Reload the modified control word now. |
| addFrameReference(BuildMI(BB, TII->get(X86::FLDCW16m)), CWFrameIdx); |
| } |
| |
| void X86DAGToDAGISel::EmitFunctionEntryCode(Function &Fn, MachineFunction &MF) { |
| // If this is main, emit special code for main. |
| MachineBasicBlock *BB = MF.begin(); |
| if (Fn.hasExternalLinkage() && Fn.getName() == "main") |
| EmitSpecialCodeForMain(BB, MF.getFrameInfo()); |
| } |
| |
| /// MatchAddress - Add the specified node to the specified addressing mode, |
| /// returning true if it cannot be done. This just pattern matches for the |
| /// addressing mode |
| bool X86DAGToDAGISel::MatchAddress(SDOperand N, X86ISelAddressMode &AM, |
| bool isRoot, unsigned Depth) { |
| // Limit recursion. |
| if (Depth > 5) |
| return MatchAddressBase(N, AM, isRoot, Depth); |
| |
| // RIP relative addressing: %rip + 32-bit displacement! |
| if (AM.isRIPRel) { |
| if (!AM.ES && AM.JT != -1 && N.getOpcode() == ISD::Constant) { |
| int64_t Val = cast<ConstantSDNode>(N)->getSignExtended(); |
| if (isInt32(AM.Disp + Val)) { |
| AM.Disp += Val; |
| return false; |
| } |
| } |
| return true; |
| } |
| |
| int id = N.Val->getNodeId(); |
| bool Available = isSelected(id); |
| |
| switch (N.getOpcode()) { |
| default: break; |
| case ISD::Constant: { |
| int64_t Val = cast<ConstantSDNode>(N)->getSignExtended(); |
| if (isInt32(AM.Disp + Val)) { |
| AM.Disp += Val; |
| return false; |
| } |
| break; |
| } |
| |
| case X86ISD::Wrapper: { |
| bool is64Bit = Subtarget->is64Bit(); |
| // Under X86-64 non-small code model, GV (and friends) are 64-bits. |
| if (is64Bit && TM.getCodeModel() != CodeModel::Small) |
| break; |
| if (AM.GV != 0 || AM.CP != 0 || AM.ES != 0 || AM.JT != -1) |
| break; |
| // If value is available in a register both base and index components have |
| // been picked, we can't fit the result available in the register in the |
| // addressing mode. Duplicate GlobalAddress or ConstantPool as displacement. |
| if (!Available || (AM.Base.Reg.Val && AM.IndexReg.Val)) { |
| bool isStatic = TM.getRelocationModel() == Reloc::Static; |
| SDOperand N0 = N.getOperand(0); |
| // Mac OS X X86-64 lower 4G address is not available. |
| bool isAbs32 = !is64Bit || |
| (isStatic && Subtarget->hasLow4GUserSpaceAddress()); |
| if (GlobalAddressSDNode *G = dyn_cast<GlobalAddressSDNode>(N0)) { |
| GlobalValue *GV = G->getGlobal(); |
| if (isAbs32 || isRoot) { |
| AM.GV = GV; |
| AM.Disp += G->getOffset(); |
| AM.isRIPRel = !isAbs32; |
| return false; |
| } |
| } else if (ConstantPoolSDNode *CP = dyn_cast<ConstantPoolSDNode>(N0)) { |
| if (isAbs32 || isRoot) { |
| AM.CP = CP->getConstVal(); |
| AM.Align = CP->getAlignment(); |
| AM.Disp += CP->getOffset(); |
| AM.isRIPRel = !isAbs32; |
| return false; |
| } |
| } else if (ExternalSymbolSDNode *S =dyn_cast<ExternalSymbolSDNode>(N0)) { |
| if (isAbs32 || isRoot) { |
| AM.ES = S->getSymbol(); |
| AM.isRIPRel = !isAbs32; |
| return false; |
| } |
| } else if (JumpTableSDNode *J = dyn_cast<JumpTableSDNode>(N0)) { |
| if (isAbs32 || isRoot) { |
| AM.JT = J->getIndex(); |
| AM.isRIPRel = !isAbs32; |
| return false; |
| } |
| } |
| } |
| break; |
| } |
| |
| case ISD::FrameIndex: |
| if (AM.BaseType == X86ISelAddressMode::RegBase && AM.Base.Reg.Val == 0) { |
| AM.BaseType = X86ISelAddressMode::FrameIndexBase; |
| AM.Base.FrameIndex = cast<FrameIndexSDNode>(N)->getIndex(); |
| return false; |
| } |
| break; |
| |
| case ISD::SHL: |
| if (!Available && AM.IndexReg.Val == 0 && AM.Scale == 1) |
| if (ConstantSDNode *CN = dyn_cast<ConstantSDNode>(N.Val->getOperand(1))) { |
| unsigned Val = CN->getValue(); |
| if (Val == 1 || Val == 2 || Val == 3) { |
| AM.Scale = 1 << Val; |
| SDOperand ShVal = N.Val->getOperand(0); |
| |
| // Okay, we know that we have a scale by now. However, if the scaled |
| // value is an add of something and a constant, we can fold the |
| // constant into the disp field here. |
| if (ShVal.Val->getOpcode() == ISD::ADD && ShVal.hasOneUse() && |
| isa<ConstantSDNode>(ShVal.Val->getOperand(1))) { |
| AM.IndexReg = ShVal.Val->getOperand(0); |
| ConstantSDNode *AddVal = |
| cast<ConstantSDNode>(ShVal.Val->getOperand(1)); |
| uint64_t Disp = AM.Disp + (AddVal->getValue() << Val); |
| if (isInt32(Disp)) |
| AM.Disp = Disp; |
| else |
| AM.IndexReg = ShVal; |
| } else { |
| AM.IndexReg = ShVal; |
| } |
| return false; |
| } |
| } |
| break; |
| |
| case ISD::MUL: |
| // X*[3,5,9] -> X+X*[2,4,8] |
| if (!Available && |
| AM.BaseType == X86ISelAddressMode::RegBase && |
| AM.Base.Reg.Val == 0 && |
| AM.IndexReg.Val == 0) { |
| if (ConstantSDNode *CN = dyn_cast<ConstantSDNode>(N.Val->getOperand(1))) |
| if (CN->getValue() == 3 || CN->getValue() == 5 || CN->getValue() == 9) { |
| AM.Scale = unsigned(CN->getValue())-1; |
| |
| SDOperand MulVal = N.Val->getOperand(0); |
| SDOperand Reg; |
| |
| // Okay, we know that we have a scale by now. However, if the scaled |
| // value is an add of something and a constant, we can fold the |
| // constant into the disp field here. |
| if (MulVal.Val->getOpcode() == ISD::ADD && MulVal.hasOneUse() && |
| isa<ConstantSDNode>(MulVal.Val->getOperand(1))) { |
| Reg = MulVal.Val->getOperand(0); |
| ConstantSDNode *AddVal = |
| cast<ConstantSDNode>(MulVal.Val->getOperand(1)); |
| uint64_t Disp = AM.Disp + AddVal->getValue() * CN->getValue(); |
| if (isInt32(Disp)) |
| AM.Disp = Disp; |
| else |
| Reg = N.Val->getOperand(0); |
| } else { |
| Reg = N.Val->getOperand(0); |
| } |
| |
| AM.IndexReg = AM.Base.Reg = Reg; |
| return false; |
| } |
| } |
| break; |
| |
| case ISD::ADD: |
| if (!Available) { |
| X86ISelAddressMode Backup = AM; |
| if (!MatchAddress(N.Val->getOperand(0), AM, false, Depth+1) && |
| !MatchAddress(N.Val->getOperand(1), AM, false, Depth+1)) |
| return false; |
| AM = Backup; |
| if (!MatchAddress(N.Val->getOperand(1), AM, false, Depth+1) && |
| !MatchAddress(N.Val->getOperand(0), AM, false, Depth+1)) |
| return false; |
| AM = Backup; |
| } |
| break; |
| |
| case ISD::OR: |
| // Handle "X | C" as "X + C" iff X is known to have C bits clear. |
| if (!Available) { |
| if (ConstantSDNode *CN = dyn_cast<ConstantSDNode>(N.getOperand(1))) { |
| X86ISelAddressMode Backup = AM; |
| // Start with the LHS as an addr mode. |
| if (!MatchAddress(N.getOperand(0), AM, false) && |
| // Address could not have picked a GV address for the displacement. |
| AM.GV == NULL && |
| // On x86-64, the resultant disp must fit in 32-bits. |
| isInt32(AM.Disp + CN->getSignExtended()) && |
| // Check to see if the LHS & C is zero. |
| CurDAG->MaskedValueIsZero(N.getOperand(0), CN->getValue())) { |
| AM.Disp += CN->getValue(); |
| return false; |
| } |
| AM = Backup; |
| } |
| } |
| break; |
| } |
| |
| return MatchAddressBase(N, AM, isRoot, Depth); |
| } |
| |
| /// MatchAddressBase - Helper for MatchAddress. Add the specified node to the |
| /// specified addressing mode without any further recursion. |
| bool X86DAGToDAGISel::MatchAddressBase(SDOperand N, X86ISelAddressMode &AM, |
| bool isRoot, unsigned Depth) { |
| // Is the base register already occupied? |
| if (AM.BaseType != X86ISelAddressMode::RegBase || AM.Base.Reg.Val) { |
| // If so, check to see if the scale index register is set. |
| if (AM.IndexReg.Val == 0) { |
| AM.IndexReg = N; |
| AM.Scale = 1; |
| return false; |
| } |
| |
| // Otherwise, we cannot select it. |
| return true; |
| } |
| |
| // Default, generate it as a register. |
| AM.BaseType = X86ISelAddressMode::RegBase; |
| AM.Base.Reg = N; |
| return false; |
| } |
| |
| /// SelectAddr - returns true if it is able pattern match an addressing mode. |
| /// It returns the operands which make up the maximal addressing mode it can |
| /// match by reference. |
| bool X86DAGToDAGISel::SelectAddr(SDOperand Op, SDOperand N, SDOperand &Base, |
| SDOperand &Scale, SDOperand &Index, |
| SDOperand &Disp) { |
| X86ISelAddressMode AM; |
| if (MatchAddress(N, AM)) |
| return false; |
| |
| MVT::ValueType VT = N.getValueType(); |
| if (AM.BaseType == X86ISelAddressMode::RegBase) { |
| if (!AM.Base.Reg.Val) |
| AM.Base.Reg = CurDAG->getRegister(0, VT); |
| } |
| |
| if (!AM.IndexReg.Val) |
| AM.IndexReg = CurDAG->getRegister(0, VT); |
| |
| getAddressOperands(AM, Base, Scale, Index, Disp); |
| return true; |
| } |
| |
| /// isZeroNode - Returns true if Elt is a constant zero or a floating point |
| /// constant +0.0. |
| static inline bool isZeroNode(SDOperand Elt) { |
| return ((isa<ConstantSDNode>(Elt) && |
| cast<ConstantSDNode>(Elt)->getValue() == 0) || |
| (isa<ConstantFPSDNode>(Elt) && |
| cast<ConstantFPSDNode>(Elt)->getValueAPF().isPosZero())); |
| } |
| |
| |
| /// SelectScalarSSELoad - Match a scalar SSE load. In particular, we want to |
| /// match a load whose top elements are either undef or zeros. The load flavor |
| /// is derived from the type of N, which is either v4f32 or v2f64. |
| bool X86DAGToDAGISel::SelectScalarSSELoad(SDOperand Op, SDOperand Pred, |
| SDOperand N, SDOperand &Base, |
| SDOperand &Scale, SDOperand &Index, |
| SDOperand &Disp, SDOperand &InChain, |
| SDOperand &OutChain) { |
| if (N.getOpcode() == ISD::SCALAR_TO_VECTOR) { |
| InChain = N.getOperand(0).getValue(1); |
| if (ISD::isNON_EXTLoad(InChain.Val) && |
| InChain.getValue(0).hasOneUse() && |
| N.hasOneUse() && |
| CanBeFoldedBy(N.Val, Pred.Val, Op.Val)) { |
| LoadSDNode *LD = cast<LoadSDNode>(InChain); |
| if (!SelectAddr(Op, LD->getBasePtr(), Base, Scale, Index, Disp)) |
| return false; |
| OutChain = LD->getChain(); |
| return true; |
| } |
| } |
| |
| // Also handle the case where we explicitly require zeros in the top |
| // elements. This is a vector shuffle from the zero vector. |
| if (N.getOpcode() == ISD::VECTOR_SHUFFLE && N.Val->hasOneUse() && |
| N.getOperand(0).getOpcode() == ISD::BUILD_VECTOR && |
| N.getOperand(1).getOpcode() == ISD::SCALAR_TO_VECTOR && |
| N.getOperand(1).Val->hasOneUse() && |
| ISD::isNON_EXTLoad(N.getOperand(1).getOperand(0).Val) && |
| N.getOperand(1).getOperand(0).hasOneUse()) { |
| // Check to see if the BUILD_VECTOR is building a zero vector. |
| SDOperand BV = N.getOperand(0); |
| for (unsigned i = 0, e = BV.getNumOperands(); i != e; ++i) |
| if (!isZeroNode(BV.getOperand(i)) && |
| BV.getOperand(i).getOpcode() != ISD::UNDEF) |
| return false; // Not a zero/undef vector. |
| // Check to see if the shuffle mask is 4/L/L/L or 2/L, where L is something |
| // from the LHS. |
| unsigned VecWidth = BV.getNumOperands(); |
| SDOperand ShufMask = N.getOperand(2); |
| assert(ShufMask.getOpcode() == ISD::BUILD_VECTOR && "Invalid shuf mask!"); |
| if (ConstantSDNode *C = dyn_cast<ConstantSDNode>(ShufMask.getOperand(0))) { |
| if (C->getValue() == VecWidth) { |
| for (unsigned i = 1; i != VecWidth; ++i) { |
| if (ShufMask.getOperand(i).getOpcode() == ISD::UNDEF) { |
| // ok. |
| } else { |
| ConstantSDNode *C = cast<ConstantSDNode>(ShufMask.getOperand(i)); |
| if (C->getValue() >= VecWidth) return false; |
| } |
| } |
| } |
| |
| // Okay, this is a zero extending load. Fold it. |
| LoadSDNode *LD = cast<LoadSDNode>(N.getOperand(1).getOperand(0)); |
| if (!SelectAddr(Op, LD->getBasePtr(), Base, Scale, Index, Disp)) |
| return false; |
| OutChain = LD->getChain(); |
| InChain = SDOperand(LD, 1); |
| return true; |
| } |
| } |
| return false; |
| } |
| |
| |
| /// SelectLEAAddr - it calls SelectAddr and determines if the maximal addressing |
| /// mode it matches can be cost effectively emitted as an LEA instruction. |
| bool X86DAGToDAGISel::SelectLEAAddr(SDOperand Op, SDOperand N, |
| SDOperand &Base, SDOperand &Scale, |
| SDOperand &Index, SDOperand &Disp) { |
| X86ISelAddressMode AM; |
| if (MatchAddress(N, AM)) |
| return false; |
| |
| MVT::ValueType VT = N.getValueType(); |
| unsigned Complexity = 0; |
| if (AM.BaseType == X86ISelAddressMode::RegBase) |
| if (AM.Base.Reg.Val) |
| Complexity = 1; |
| else |
| AM.Base.Reg = CurDAG->getRegister(0, VT); |
| else if (AM.BaseType == X86ISelAddressMode::FrameIndexBase) |
| Complexity = 4; |
| |
| if (AM.IndexReg.Val) |
| Complexity++; |
| else |
| AM.IndexReg = CurDAG->getRegister(0, VT); |
| |
| // Don't match just leal(,%reg,2). It's cheaper to do addl %reg, %reg, or with |
| // a simple shift. |
| if (AM.Scale > 1) |
| Complexity++; |
| |
| // FIXME: We are artificially lowering the criteria to turn ADD %reg, $GA |
| // to a LEA. This is determined with some expermentation but is by no means |
| // optimal (especially for code size consideration). LEA is nice because of |
| // its three-address nature. Tweak the cost function again when we can run |
| // convertToThreeAddress() at register allocation time. |
| if (AM.GV || AM.CP || AM.ES || AM.JT != -1) { |
| // For X86-64, we should always use lea to materialize RIP relative |
| // addresses. |
| if (Subtarget->is64Bit()) |
| Complexity = 4; |
| else |
| Complexity += 2; |
| } |
| |
| if (AM.Disp && (AM.Base.Reg.Val || AM.IndexReg.Val)) |
| Complexity++; |
| |
| if (Complexity > 2) { |
| getAddressOperands(AM, Base, Scale, Index, Disp); |
| return true; |
| } |
| return false; |
| } |
| |
| bool X86DAGToDAGISel::TryFoldLoad(SDOperand P, SDOperand N, |
| SDOperand &Base, SDOperand &Scale, |
| SDOperand &Index, SDOperand &Disp) { |
| if (ISD::isNON_EXTLoad(N.Val) && |
| N.hasOneUse() && |
| CanBeFoldedBy(N.Val, P.Val, P.Val)) |
| return SelectAddr(P, N.getOperand(1), Base, Scale, Index, Disp); |
| return false; |
| } |
| |
| /// getGlobalBaseReg - Output the instructions required to put the |
| /// base address to use for accessing globals into a register. |
| /// |
| SDNode *X86DAGToDAGISel::getGlobalBaseReg() { |
| assert(!Subtarget->is64Bit() && "X86-64 PIC uses RIP relative addressing"); |
| if (!GlobalBaseReg) { |
| // Insert the set of GlobalBaseReg into the first MBB of the function |
| MachineBasicBlock &FirstMBB = BB->getParent()->front(); |
| MachineBasicBlock::iterator MBBI = FirstMBB.begin(); |
| SSARegMap *RegMap = BB->getParent()->getSSARegMap(); |
| unsigned PC = RegMap->createVirtualRegister(X86::GR32RegisterClass); |
| |
| const TargetInstrInfo *TII = TM.getInstrInfo(); |
| BuildMI(FirstMBB, MBBI, TII->get(X86::MovePCtoStack)); |
| BuildMI(FirstMBB, MBBI, TII->get(X86::POP32r), PC); |
| |
| // If we're using vanilla 'GOT' PIC style, we should use relative addressing |
| // not to pc, but to _GLOBAL_ADDRESS_TABLE_ external |
| if (TM.getRelocationModel() == Reloc::PIC_ && |
| Subtarget->isPICStyleGOT()) { |
| GlobalBaseReg = RegMap->createVirtualRegister(X86::GR32RegisterClass); |
| BuildMI(FirstMBB, MBBI, TII->get(X86::ADD32ri), GlobalBaseReg). |
| addReg(PC). |
| addExternalSymbol("_GLOBAL_OFFSET_TABLE_"); |
| } else { |
| GlobalBaseReg = PC; |
| } |
| |
| } |
| return CurDAG->getRegister(GlobalBaseReg, TLI.getPointerTy()).Val; |
| } |
| |
| static SDNode *FindCallStartFromCall(SDNode *Node) { |
| if (Node->getOpcode() == ISD::CALLSEQ_START) return Node; |
| assert(Node->getOperand(0).getValueType() == MVT::Other && |
| "Node doesn't have a token chain argument!"); |
| return FindCallStartFromCall(Node->getOperand(0).Val); |
| } |
| |
| SDNode *X86DAGToDAGISel::getTruncate(SDOperand N0, MVT::ValueType VT) { |
| SDOperand SRIdx; |
| switch (VT) { |
| case MVT::i8: |
| SRIdx = CurDAG->getTargetConstant(1, MVT::i32); // SubRegSet 1 |
| // Ensure that the source register has an 8-bit subreg on 32-bit targets |
| if (!Subtarget->is64Bit()) { |
| unsigned Opc; |
| MVT::ValueType VT; |
| switch (N0.getValueType()) { |
| default: assert(0 && "Unknown truncate!"); |
| case MVT::i16: |
| Opc = X86::MOV16to16_; |
| VT = MVT::i16; |
| break; |
| case MVT::i32: |
| Opc = X86::MOV32to32_; |
| VT = MVT::i32; |
| break; |
| } |
| N0 = |
| SDOperand(CurDAG->getTargetNode(Opc, VT, N0), 0); |
| } |
| break; |
| case MVT::i16: |
| SRIdx = CurDAG->getTargetConstant(2, MVT::i32); // SubRegSet 2 |
| break; |
| case MVT::i32: |
| SRIdx = CurDAG->getTargetConstant(3, MVT::i32); // SubRegSet 3 |
| break; |
| default: assert(0 && "Unknown truncate!"); |
| } |
| return CurDAG->getTargetNode(X86::EXTRACT_SUBREG, |
| VT, |
| N0, SRIdx); |
| } |
| |
| |
| SDNode *X86DAGToDAGISel::Select(SDOperand N) { |
| SDNode *Node = N.Val; |
| MVT::ValueType NVT = Node->getValueType(0); |
| unsigned Opc, MOpc; |
| unsigned Opcode = Node->getOpcode(); |
| |
| #ifndef NDEBUG |
| DOUT << std::string(Indent, ' ') << "Selecting: "; |
| DEBUG(Node->dump(CurDAG)); |
| DOUT << "\n"; |
| Indent += 2; |
| #endif |
| |
| if (Opcode >= ISD::BUILTIN_OP_END && Opcode < X86ISD::FIRST_NUMBER) { |
| #ifndef NDEBUG |
| DOUT << std::string(Indent-2, ' ') << "== "; |
| DEBUG(Node->dump(CurDAG)); |
| DOUT << "\n"; |
| Indent -= 2; |
| #endif |
| return NULL; // Already selected. |
| } |
| |
| switch (Opcode) { |
| default: break; |
| case X86ISD::GlobalBaseReg: |
| return getGlobalBaseReg(); |
| |
| case ISD::ADD: { |
| // Turn ADD X, c to MOV32ri X+c. This cannot be done with tblgen'd |
| // code and is matched first so to prevent it from being turned into |
| // LEA32r X+c. |
| // In 64-bit mode, use LEA to take advantage of RIP-relative addressing. |
| MVT::ValueType PtrVT = TLI.getPointerTy(); |
| SDOperand N0 = N.getOperand(0); |
| SDOperand N1 = N.getOperand(1); |
| if (N.Val->getValueType(0) == PtrVT && |
| N0.getOpcode() == X86ISD::Wrapper && |
| N1.getOpcode() == ISD::Constant) { |
| unsigned Offset = (unsigned)cast<ConstantSDNode>(N1)->getValue(); |
| SDOperand C(0, 0); |
| // TODO: handle ExternalSymbolSDNode. |
| if (GlobalAddressSDNode *G = |
| dyn_cast<GlobalAddressSDNode>(N0.getOperand(0))) { |
| C = CurDAG->getTargetGlobalAddress(G->getGlobal(), PtrVT, |
| G->getOffset() + Offset); |
| } else if (ConstantPoolSDNode *CP = |
| dyn_cast<ConstantPoolSDNode>(N0.getOperand(0))) { |
| C = CurDAG->getTargetConstantPool(CP->getConstVal(), PtrVT, |
| CP->getAlignment(), |
| CP->getOffset()+Offset); |
| } |
| |
| if (C.Val) { |
| if (Subtarget->is64Bit()) { |
| SDOperand Ops[] = { CurDAG->getRegister(0, PtrVT), getI8Imm(1), |
| CurDAG->getRegister(0, PtrVT), C }; |
| return CurDAG->SelectNodeTo(N.Val, X86::LEA64r, MVT::i64, Ops, 4); |
| } else |
| return CurDAG->SelectNodeTo(N.Val, X86::MOV32ri, PtrVT, C); |
| } |
| } |
| |
| // Other cases are handled by auto-generated code. |
| break; |
| } |
| |
| case ISD::MUL: { |
| if (NVT == MVT::i8) { |
| SDOperand N0 = Node->getOperand(0); |
| SDOperand N1 = Node->getOperand(1); |
| SDOperand Tmp0, Tmp1, Tmp2, Tmp3; |
| bool foldedLoad = TryFoldLoad(N, N1, Tmp0, Tmp1, Tmp2, Tmp3); |
| if (!foldedLoad) { |
| foldedLoad = TryFoldLoad(N, N0, Tmp0, Tmp1, Tmp2, Tmp3); |
| if (foldedLoad) |
| std::swap(N0, N1); |
| } |
| |
| SDNode *ResNode; |
| if (foldedLoad) { |
| SDOperand Chain = N1.getOperand(0); |
| AddToISelQueue(N0); |
| AddToISelQueue(Chain); |
| AddToISelQueue(Tmp0); |
| AddToISelQueue(Tmp1); |
| AddToISelQueue(Tmp2); |
| AddToISelQueue(Tmp3); |
| SDOperand InFlag(0, 0); |
| Chain = CurDAG->getCopyToReg(Chain, X86::AL, N0, InFlag); |
| InFlag = Chain.getValue(1); |
| SDOperand Ops[] = { Tmp0, Tmp1, Tmp2, Tmp3, Chain, InFlag }; |
| ResNode = CurDAG->getTargetNode(X86::MUL8m, MVT::i8, MVT::i8, |
| MVT::Other, Ops, 6); |
| ReplaceUses(N1.getValue(1), SDOperand(ResNode, 2)); |
| } else { |
| SDOperand Chain = CurDAG->getEntryNode(); |
| AddToISelQueue(N0); |
| AddToISelQueue(N1); |
| SDOperand InFlag(0, 0); |
| InFlag = CurDAG->getCopyToReg(Chain, X86::AL, N0, InFlag).getValue(1); |
| ResNode = CurDAG->getTargetNode(X86::MUL8r, MVT::i8, MVT::i8, |
| N1, InFlag); |
| } |
| |
| ReplaceUses(N.getValue(0), SDOperand(ResNode, 0)); |
| return NULL; |
| } |
| break; |
| } |
| |
| case ISD::MULHU: |
| case ISD::MULHS: { |
| if (Opcode == ISD::MULHU) |
| switch (NVT) { |
| default: assert(0 && "Unsupported VT!"); |
| case MVT::i8: Opc = X86::MUL8r; MOpc = X86::MUL8m; break; |
| case MVT::i16: Opc = X86::MUL16r; MOpc = X86::MUL16m; break; |
| case MVT::i32: Opc = X86::MUL32r; MOpc = X86::MUL32m; break; |
| case MVT::i64: Opc = X86::MUL64r; MOpc = X86::MUL64m; break; |
| } |
| else |
| switch (NVT) { |
| default: assert(0 && "Unsupported VT!"); |
| case MVT::i8: Opc = X86::IMUL8r; MOpc = X86::IMUL8m; break; |
| case MVT::i16: Opc = X86::IMUL16r; MOpc = X86::IMUL16m; break; |
| case MVT::i32: Opc = X86::IMUL32r; MOpc = X86::IMUL32m; break; |
| case MVT::i64: Opc = X86::IMUL64r; MOpc = X86::IMUL64m; break; |
| } |
| |
| unsigned LoReg, HiReg; |
| switch (NVT) { |
| default: assert(0 && "Unsupported VT!"); |
| case MVT::i8: LoReg = X86::AL; HiReg = X86::AH; break; |
| case MVT::i16: LoReg = X86::AX; HiReg = X86::DX; break; |
| case MVT::i32: LoReg = X86::EAX; HiReg = X86::EDX; break; |
| case MVT::i64: LoReg = X86::RAX; HiReg = X86::RDX; break; |
| } |
| |
| SDOperand N0 = Node->getOperand(0); |
| SDOperand N1 = Node->getOperand(1); |
| |
| SDOperand Tmp0, Tmp1, Tmp2, Tmp3; |
| bool foldedLoad = TryFoldLoad(N, N1, Tmp0, Tmp1, Tmp2, Tmp3); |
| // MULHU and MULHS are commmutative |
| if (!foldedLoad) { |
| foldedLoad = TryFoldLoad(N, N0, Tmp0, Tmp1, Tmp2, Tmp3); |
| if (foldedLoad) |
| std::swap(N0, N1); |
| } |
| |
| SDOperand Chain; |
| if (foldedLoad) { |
| Chain = N1.getOperand(0); |
| AddToISelQueue(Chain); |
| } else |
| Chain = CurDAG->getEntryNode(); |
| |
| SDOperand InFlag(0, 0); |
| AddToISelQueue(N0); |
| Chain = CurDAG->getCopyToReg(Chain, CurDAG->getRegister(LoReg, NVT), |
| N0, InFlag); |
| InFlag = Chain.getValue(1); |
| |
| if (foldedLoad) { |
| AddToISelQueue(Tmp0); |
| AddToISelQueue(Tmp1); |
| AddToISelQueue(Tmp2); |
| AddToISelQueue(Tmp3); |
| SDOperand Ops[] = { Tmp0, Tmp1, Tmp2, Tmp3, Chain, InFlag }; |
| SDNode *CNode = |
| CurDAG->getTargetNode(MOpc, MVT::Other, MVT::Flag, Ops, 6); |
| Chain = SDOperand(CNode, 0); |
| InFlag = SDOperand(CNode, 1); |
| } else { |
| AddToISelQueue(N1); |
| InFlag = |
| SDOperand(CurDAG->getTargetNode(Opc, MVT::Flag, N1, InFlag), 0); |
| } |
| |
| SDOperand Result; |
| if (HiReg == X86::AH && Subtarget->is64Bit()) { |
| // Prevent use of AH in a REX instruction by referencing AX instead. |
| // Shift it down 8 bits. |
| Result = CurDAG->getCopyFromReg(Chain, X86::AX, MVT::i16, InFlag); |
| Chain = Result.getValue(1); |
| Result = SDOperand(CurDAG->getTargetNode(X86::SHR16ri, MVT::i16, Result, |
| CurDAG->getTargetConstant(8, MVT::i8)), 0); |
| // Then truncate it down to i8. |
| SDOperand SRIdx = CurDAG->getTargetConstant(1, MVT::i32); // SubRegSet 1 |
| Result = SDOperand(CurDAG->getTargetNode(X86::EXTRACT_SUBREG, |
| MVT::i8, Result, SRIdx), 0); |
| } else { |
| Result = CurDAG->getCopyFromReg(Chain, HiReg, NVT, InFlag); |
| } |
| ReplaceUses(N.getValue(0), Result); |
| if (foldedLoad) |
| ReplaceUses(N1.getValue(1), Result.getValue(1)); |
| |
| #ifndef NDEBUG |
| DOUT << std::string(Indent-2, ' ') << "=> "; |
| DEBUG(Result.Val->dump(CurDAG)); |
| DOUT << "\n"; |
| Indent -= 2; |
| #endif |
| return NULL; |
| } |
| |
| case ISD::SDIV: |
| case ISD::UDIV: |
| case ISD::SREM: |
| case ISD::UREM: { |
| bool isSigned = Opcode == ISD::SDIV || Opcode == ISD::SREM; |
| bool isDiv = Opcode == ISD::SDIV || Opcode == ISD::UDIV; |
| if (!isSigned) |
| switch (NVT) { |
| default: assert(0 && "Unsupported VT!"); |
| case MVT::i8: Opc = X86::DIV8r; MOpc = X86::DIV8m; break; |
| case MVT::i16: Opc = X86::DIV16r; MOpc = X86::DIV16m; break; |
| case MVT::i32: Opc = X86::DIV32r; MOpc = X86::DIV32m; break; |
| case MVT::i64: Opc = X86::DIV64r; MOpc = X86::DIV64m; break; |
| } |
| else |
| switch (NVT) { |
| default: assert(0 && "Unsupported VT!"); |
| case MVT::i8: Opc = X86::IDIV8r; MOpc = X86::IDIV8m; break; |
| case MVT::i16: Opc = X86::IDIV16r; MOpc = X86::IDIV16m; break; |
| case MVT::i32: Opc = X86::IDIV32r; MOpc = X86::IDIV32m; break; |
| case MVT::i64: Opc = X86::IDIV64r; MOpc = X86::IDIV64m; break; |
| } |
| |
| unsigned LoReg, HiReg; |
| unsigned ClrOpcode, SExtOpcode; |
| switch (NVT) { |
| default: assert(0 && "Unsupported VT!"); |
| case MVT::i8: |
| LoReg = X86::AL; HiReg = X86::AH; |
| ClrOpcode = 0; |
| SExtOpcode = X86::CBW; |
| break; |
| case MVT::i16: |
| LoReg = X86::AX; HiReg = X86::DX; |
| ClrOpcode = X86::MOV16r0; |
| SExtOpcode = X86::CWD; |
| break; |
| case MVT::i32: |
| LoReg = X86::EAX; HiReg = X86::EDX; |
| ClrOpcode = X86::MOV32r0; |
| SExtOpcode = X86::CDQ; |
| break; |
| case MVT::i64: |
| LoReg = X86::RAX; HiReg = X86::RDX; |
| ClrOpcode = X86::MOV64r0; |
| SExtOpcode = X86::CQO; |
| break; |
| } |
| |
| SDOperand N0 = Node->getOperand(0); |
| SDOperand N1 = Node->getOperand(1); |
| SDOperand InFlag(0, 0); |
| if (NVT == MVT::i8 && !isSigned) { |
| // Special case for div8, just use a move with zero extension to AX to |
| // clear the upper 8 bits (AH). |
| SDOperand Tmp0, Tmp1, Tmp2, Tmp3, Move, Chain; |
| if (TryFoldLoad(N, N0, Tmp0, Tmp1, Tmp2, Tmp3)) { |
| SDOperand Ops[] = { Tmp0, Tmp1, Tmp2, Tmp3, N0.getOperand(0) }; |
| AddToISelQueue(N0.getOperand(0)); |
| AddToISelQueue(Tmp0); |
| AddToISelQueue(Tmp1); |
| AddToISelQueue(Tmp2); |
| AddToISelQueue(Tmp3); |
| Move = |
| SDOperand(CurDAG->getTargetNode(X86::MOVZX16rm8, MVT::i16, MVT::Other, |
| Ops, 5), 0); |
| Chain = Move.getValue(1); |
| ReplaceUses(N0.getValue(1), Chain); |
| } else { |
| AddToISelQueue(N0); |
| Move = |
| SDOperand(CurDAG->getTargetNode(X86::MOVZX16rr8, MVT::i16, N0), 0); |
| Chain = CurDAG->getEntryNode(); |
| } |
| Chain = CurDAG->getCopyToReg(Chain, X86::AX, Move, InFlag); |
| InFlag = Chain.getValue(1); |
| } else { |
| AddToISelQueue(N0); |
| InFlag = |
| CurDAG->getCopyToReg(CurDAG->getEntryNode(), LoReg, N0, |
| InFlag).getValue(1); |
| if (isSigned) { |
| // Sign extend the low part into the high part. |
| InFlag = |
| SDOperand(CurDAG->getTargetNode(SExtOpcode, MVT::Flag, InFlag), 0); |
| } else { |
| // Zero out the high part, effectively zero extending the input. |
| SDOperand ClrNode = SDOperand(CurDAG->getTargetNode(ClrOpcode, NVT), 0); |
| InFlag = CurDAG->getCopyToReg(CurDAG->getEntryNode(), HiReg, ClrNode, |
| InFlag).getValue(1); |
| } |
| } |
| |
| SDOperand Tmp0, Tmp1, Tmp2, Tmp3, Chain; |
| bool foldedLoad = TryFoldLoad(N, N1, Tmp0, Tmp1, Tmp2, Tmp3); |
| if (foldedLoad) { |
| AddToISelQueue(N1.getOperand(0)); |
| AddToISelQueue(Tmp0); |
| AddToISelQueue(Tmp1); |
| AddToISelQueue(Tmp2); |
| AddToISelQueue(Tmp3); |
| SDOperand Ops[] = { Tmp0, Tmp1, Tmp2, Tmp3, N1.getOperand(0), InFlag }; |
| SDNode *CNode = |
| CurDAG->getTargetNode(MOpc, MVT::Other, MVT::Flag, Ops, 6); |
| Chain = SDOperand(CNode, 0); |
| InFlag = SDOperand(CNode, 1); |
| } else { |
| AddToISelQueue(N1); |
| Chain = CurDAG->getEntryNode(); |
| InFlag = |
| SDOperand(CurDAG->getTargetNode(Opc, MVT::Flag, N1, InFlag), 0); |
| } |
| |
| unsigned Reg = isDiv ? LoReg : HiReg; |
| SDOperand Result; |
| if (Reg == X86::AH && Subtarget->is64Bit()) { |
| // Prevent use of AH in a REX instruction by referencing AX instead. |
| // Shift it down 8 bits. |
| Result = CurDAG->getCopyFromReg(Chain, X86::AX, MVT::i16, InFlag); |
| Chain = Result.getValue(1); |
| Result = SDOperand(CurDAG->getTargetNode(X86::SHR16ri, MVT::i16, Result, |
| CurDAG->getTargetConstant(8, MVT::i8)), 0); |
| // Then truncate it down to i8. |
| SDOperand SRIdx = CurDAG->getTargetConstant(1, MVT::i32); // SubRegSet 1 |
| Result = SDOperand(CurDAG->getTargetNode(X86::EXTRACT_SUBREG, |
| MVT::i8, Result, SRIdx), 0); |
| } else { |
| Result = CurDAG->getCopyFromReg(Chain, Reg, NVT, InFlag); |
| Chain = Result.getValue(1); |
| } |
| ReplaceUses(N.getValue(0), Result); |
| if (foldedLoad) |
| ReplaceUses(N1.getValue(1), Chain); |
| |
| #ifndef NDEBUG |
| DOUT << std::string(Indent-2, ' ') << "=> "; |
| DEBUG(Result.Val->dump(CurDAG)); |
| DOUT << "\n"; |
| Indent -= 2; |
| #endif |
| |
| return NULL; |
| } |
| |
| case ISD::ANY_EXTEND: { |
| SDOperand N0 = Node->getOperand(0); |
| AddToISelQueue(N0); |
| if (NVT == MVT::i64 || NVT == MVT::i32 || NVT == MVT::i16) { |
| SDOperand SRIdx; |
| switch(N0.getValueType()) { |
| case MVT::i32: |
| SRIdx = CurDAG->getTargetConstant(3, MVT::i32); // SubRegSet 3 |
| break; |
| case MVT::i16: |
| SRIdx = CurDAG->getTargetConstant(2, MVT::i32); // SubRegSet 2 |
| break; |
| case MVT::i8: |
| if (Subtarget->is64Bit()) |
| SRIdx = CurDAG->getTargetConstant(1, MVT::i32); // SubRegSet 1 |
| break; |
| default: assert(0 && "Unknown any_extend!"); |
| } |
| if (SRIdx.Val) { |
| SDNode *ResNode = CurDAG->getTargetNode(X86::INSERT_SUBREG, NVT, N0, SRIdx); |
| |
| #ifndef NDEBUG |
| DOUT << std::string(Indent-2, ' ') << "=> "; |
| DEBUG(ResNode->dump(CurDAG)); |
| DOUT << "\n"; |
| Indent -= 2; |
| #endif |
| return ResNode; |
| } // Otherwise let generated ISel handle it. |
| } |
| break; |
| } |
| |
| case ISD::SIGN_EXTEND_INREG: { |
| SDOperand N0 = Node->getOperand(0); |
| AddToISelQueue(N0); |
| |
| MVT::ValueType SVT = cast<VTSDNode>(Node->getOperand(1))->getVT(); |
| SDOperand TruncOp = SDOperand(getTruncate(N0, SVT), 0); |
| unsigned Opc; |
| switch (NVT) { |
| case MVT::i16: |
| if (SVT == MVT::i8) Opc = X86::MOVSX16rr8; |
| else assert(0 && "Unknown sign_extend_inreg!"); |
| break; |
| case MVT::i32: |
| switch (SVT) { |
| case MVT::i8: Opc = X86::MOVSX32rr8; break; |
| case MVT::i16: Opc = X86::MOVSX32rr16; break; |
| default: assert(0 && "Unknown sign_extend_inreg!"); |
| } |
| break; |
| case MVT::i64: |
| switch (SVT) { |
| case MVT::i8: Opc = X86::MOVSX64rr8; break; |
| case MVT::i16: Opc = X86::MOVSX64rr16; break; |
| case MVT::i32: Opc = X86::MOVSX64rr32; break; |
| default: assert(0 && "Unknown sign_extend_inreg!"); |
| } |
| break; |
| default: assert(0 && "Unknown sign_extend_inreg!"); |
| } |
| |
| SDNode *ResNode = CurDAG->getTargetNode(Opc, NVT, TruncOp); |
| |
| #ifndef NDEBUG |
| DOUT << std::string(Indent-2, ' ') << "=> "; |
| DEBUG(TruncOp.Val->dump(CurDAG)); |
| DOUT << "\n"; |
| DOUT << std::string(Indent-2, ' ') << "=> "; |
| DEBUG(ResNode->dump(CurDAG)); |
| DOUT << "\n"; |
| Indent -= 2; |
| #endif |
| return ResNode; |
| break; |
| } |
| |
| case ISD::TRUNCATE: { |
| SDOperand Input = Node->getOperand(0); |
| AddToISelQueue(Node->getOperand(0)); |
| SDNode *ResNode = getTruncate(Input, NVT); |
| |
| #ifndef NDEBUG |
| DOUT << std::string(Indent-2, ' ') << "=> "; |
| DEBUG(ResNode->dump(CurDAG)); |
| DOUT << "\n"; |
| Indent -= 2; |
| #endif |
| return ResNode; |
| break; |
| } |
| } |
| |
| SDNode *ResNode = SelectCode(N); |
| |
| #ifndef NDEBUG |
| DOUT << std::string(Indent-2, ' ') << "=> "; |
| if (ResNode == NULL || ResNode == N.Val) |
| DEBUG(N.Val->dump(CurDAG)); |
| else |
| DEBUG(ResNode->dump(CurDAG)); |
| DOUT << "\n"; |
| Indent -= 2; |
| #endif |
| |
| return ResNode; |
| } |
| |
| bool X86DAGToDAGISel:: |
| SelectInlineAsmMemoryOperand(const SDOperand &Op, char ConstraintCode, |
| std::vector<SDOperand> &OutOps, SelectionDAG &DAG){ |
| SDOperand Op0, Op1, Op2, Op3; |
| switch (ConstraintCode) { |
| case 'o': // offsetable ?? |
| case 'v': // not offsetable ?? |
| default: return true; |
| case 'm': // memory |
| if (!SelectAddr(Op, Op, Op0, Op1, Op2, Op3)) |
| return true; |
| break; |
| } |
| |
| OutOps.push_back(Op0); |
| OutOps.push_back(Op1); |
| OutOps.push_back(Op2); |
| OutOps.push_back(Op3); |
| AddToISelQueue(Op0); |
| AddToISelQueue(Op1); |
| AddToISelQueue(Op2); |
| AddToISelQueue(Op3); |
| return false; |
| } |
| |
| /// createX86ISelDag - This pass converts a legalized DAG into a |
| /// X86-specific DAG, ready for instruction scheduling. |
| /// |
| FunctionPass *llvm::createX86ISelDag(X86TargetMachine &TM, bool Fast) { |
| return new X86DAGToDAGISel(TM, Fast); |
| } |