| <testname=dhcpd_tests.sh> |
| <description> |
| Test basic functionality of dhcpd server. |
| |
| <\description> |
| <test_location> |
| ltp/testcases/network/dhcpd/dhcpd_tests.sh |
| <\test_location> |
| <\testname> |
| <testname=ipchains_tests.sh> |
| <description> |
| Test basic functionality of ipchains. |
| |
| <\description> |
| <test_location> |
| <\test_location> |
| <\testname> |
| <testname=ip_tests.sh> |
| <description> |
| Test basic functionality of ip command in route2 package |
| |
| <\description> |
| <test_location> |
| ltp/testcases/network/iproute/ip_tests.sh |
| <\test_location> |
| <\testname> |
| <testname=echo601> |
| <description> |
| Stresses the inetd/xinetd daemon using the `echo` service. |
| |
| <\description> |
| <test_location> |
| ltp/testcases/network/ipv6/echo6/echo601 |
| <\test_location> |
| <\testname> |
| <testname=finger601> |
| <description> |
| test the basic functionality of the `finger` command. |
| |
| <\description> |
| <test_location> |
| ltp/testcases/network/ipv6/finger6/finger601 |
| <\test_location> |
| <\testname> |
| <testname=ftp601> |
| <description> |
| test the basic functionality of the `ftp` command. |
| |
| <\description> |
| <test_location> |
| <\test_location> |
| <\testname> |
| <testname=perf_lan6> |
| <description> |
| Generates LAN traffic using ICMP echo packets. |
| |
| <\description> |
| <test_location> |
| ltp/testcases/network/ipv6/perf_lan6 |
| <\test_location> |
| <\testname> |
| <testname=ping601> |
| <description> |
| test the basic functionality of the `ping` command. |
| |
| <\description> |
| <test_location> |
| ltp/testcases/network/ipv6/ping6/ping601 |
| <\test_location> |
| <\testname> |
| <testname=rcp601> |
| <description> |
| test the basic functionality of the `rcp` command. |
| |
| <\description> |
| <test_location> |
| <\test_location> |
| <\testname> |
| <testname=rlogin601> |
| <description> |
| Tests the basic functionality of `rlogin`. |
| |
| <\description> |
| <test_location> |
| <\test_location> |
| <\testname> |
| <testname=rsh601> |
| <description> |
| test the basic functionality of the `rsh` command. |
| |
| <\description> |
| <test_location> |
| <\test_location> |
| <\testname> |
| <testname=rwho601> |
| <description> |
| test the basic functionality of the rwhod daemon using the |
| |
| <\description> |
| <test_location> |
| <\test_location> |
| <\testname> |
| <testname=sendfile601> |
| <description> |
| Copy files from server to client using the sendfile() |
| function. |
| |
| <\description> |
| <test_location> |
| ltp/testcases/network/ipv6/sendfile6/sendfile601 |
| <\test_location> |
| <\testname> |
| <testname=tcpdump6> |
| <description> |
| test the basic functionality of `tcpdump`. |
| |
| <\description> |
| <test_location> |
| ltp/testcases/network/ipv6/tcpdump6 |
| <\test_location> |
| <\testname> |
| <testname=telnet601> |
| <description> |
| Tests the basic functionality of `telnet`. |
| |
| <\description> |
| <test_location> |
| <\test_location> |
| <\testname> |
| <testname=mc_cmds> |
| <description> |
| To determine the stability of the IP Multicast product |
| and to verify the accuracy and usablility of IP Multicast |
| related publications associated with changes and/or |
| additions to command level interfaces for this implementations |
| of IP Multicast. |
| |
| <\description> |
| <test_location> |
| ltp/testcases/network/multicast/mc_cmds |
| <\test_location> |
| <\testname> |
| <testname=mc_commo> |
| <description> |
| To verify that IP Multicast can be used to send UDP datagrams |
| between two or more nodes on the same subnetwork using |
| a specific IP Multicast group and a specific port address. |
| |
| <\description> |
| <test_location> |
| ltp/testcases/network/multicast/mc_commo |
| <\test_location> |
| <\testname> |
| <testname=mc_member> |
| <description> |
| To verify that two of the new options for level IPPROTO_IP |
| Service Interface allow the list of host group memberships |
| to be updated properly in response to the JoinHostGroup and |
| LeaveHostGroup requests. To test boundary conditions while |
| exercising IP Multicast JoinHostGroup and LeaveHostGroup |
| Service Interfaces. |
| |
| <\description> |
| <test_location> |
| ltp/testcases/network/multicast/mc_member |
| <\test_location> |
| <\testname> |
| <testname=mc_opts> |
| <description> |
| To verify that three of the new options for level IPPROTO_IP |
| Service Interface are initially set to the default values as |
| defined in the documentation and that each of the new options |
| can be set and read properly by the setsockopt and getsockopt |
| routines, respectively. To test boundary conditions and to |
| generate errors while exercising the IP Multicast Service |
| Interface options. |
| |
| <\description> |
| <test_location> |
| ltp/testcases/network/multicast/mc_opts |
| <\test_location> |
| <\testname> |
| <testname=fsx-linux> |
| <description> |
| Created by NeXT Software (Apple Computer, Inc.). This test will |
| thrash your NFS filesystem and has uncovered numerous bugs within |
| the Linux implementation. |
| |
| <\description> |
| <test_location> |
| ltp/testcases/network/nfs/fsx-linux |
| <\test_location> |
| <\testname> |
| <testname=nfs01> |
| <description> |
| Stresses NFS by opening a large number of files on a nfs |
| mounted filesystem. |
| |
| <\description> |
| <test_location> |
| ltp/testcases/network/nfs/nfs01 |
| <\test_location> |
| <\testname> |
| <testname=nfs02> |
| <description> |
| Tests NFS copy of various filesizes, file consistency between copies |
| and preservation of write/nowrite permissions. |
| |
| <\description> |
| <test_location> |
| ltp/testcases/network/nfs/nfs02 |
| <\test_location> |
| <\testname> |
| <testname=nfs03> |
| <description> |
| Runs the LTP filesystem test: fs_inod, on an NFS mountpoint. |
| |
| <\description> |
| <test_location> |
| ltp/testcases/network/nfs/nfs03 |
| <\test_location> |
| <\testname> |
| <testname=nfslock01> |
| <description> |
| Two processes open FLOCK_IDATA file simultaneously |
| each one locks odd and even lines of the file simultaneously |
| and fill them with '0's and '1's. After they find eof, the |
| datafiles are compared. |
| |
| <\description> |
| <test_location> |
| ltp/testcases/network/nfs/nfslock01 |
| <\test_location> |
| <\testname> |
| <testname=nfsstat01> |
| <description> |
| Tests the 'nfsstat' command. This test runs locally, so no |
| actual network connection is needed. |
| |
| <\description> |
| <test_location> |
| ltp/testcases/network/nfs/nfsstat01 |
| <\test_location> |
| <\testname> |
| <testname=nfsstress> |
| <description> |
| This program is designed stress the NFS implimentation. |
| Many bugs were uncovered in the AIX operating system |
| implimentation of NFS when AIX kernel was built over NFS. |
| Source directory on a remote machine (one server many clients) |
| NFS-mounted on to a directory on a local machine from which |
| the kernel build was initiated. Apparently many defects/bugs |
| were uncovered when multiple users tried to build the kernel |
| by NFS mounting the kernel source from a remote machine and |
| tried to build the kernel on a local machine. AIX build envi- |
| ronment is set up to create the object files and executable |
| on the local machine. |
| This testcase will try to recreate such a senario. |
| Spawn N number of threads. Each thread does the following. |
| * Create a directory tree. |
| * Populate it with ".c" files and makefiles. |
| * initate a build. Executable will print hello world when executed |
| * clean up all the executables that were created. |
| * recurssively remove each subdir and its contents. |
| The test is aimed at stressing the NFS client and server. |
| |
| <\description> |
| <test_location> |
| ltp/testcases/network/nfs/nfsstress |
| <\test_location> |
| <\testname> |
| <testname=rpc01> |
| <description> |
| Tests for SunRPC API |
| |
| Test rpc using file transfers between a client & server |
| |
| <\description> |
| <test_location> |
| ltp/testcases/network/rpc/basic_tests/rpc01 |
| <\test_location> |
| <\testname> |
| <testname=rpcinfo01> |
| <description> |
| Basic test for the `rpcinfo` command. |
| |
| <\description> |
| <test_location> |
| ltp/testcases/network/rpc/basic_tests/rpcinfo/rpcinfo01 |
| <\test_location> |
| <\testname> |
| <testname=rup01> |
| <description> |
| Basic test for the `rup` command. |
| |
| <\description> |
| <test_location> |
| ltp/testcases/network/rpc/basic_tests/rup/rup01 |
| <\test_location> |
| <\testname> |
| <testname=rusers01> |
| <description> |
| Basic test for the `rusers` command. |
| |
| <\description> |
| <test_location> |
| ltp/testcases/network/rpc/basic_tests/rusers/rusers01 |
| <\test_location> |
| <\testname> |
| <testname=accept01-sctp> |
| <description> |
| Full test for SunRPC and TI-RPC API |
| |
| Verify that accept() returns the proper errno for various failure cases |
| |
| <\description> |
| <test_location> |
| <\test_location> |
| <\testname> |
| <testname=bind01-sctp-udp/tcp> |
| <description> |
| Verify that bind() returns the proper errno for various failure cases |
| |
| <\description> |
| <test_location> |
| <\test_location> |
| <\testname> |
| <testname=listen01-sctp-udp/tcp> |
| <description> |
| Verify that listen() returns the proper errno for various failure cases |
| |
| <\description> |
| <test_location> |
| <\test_location> |
| <\testname> |
| <testname=recv01-sctp-udp/tcp> |
| <description> |
| Verify that recv() returns the proper errno for various failure cases |
| |
| <\description> |
| <test_location> |
| <\test_location> |
| <\testname> |
| <testname=recvfrom01-sctp-udp/tcp> |
| <description> |
| Verify that recvfrom() returns the proper errno for various failure cases |
| |
| <\description> |
| <test_location> |
| <\test_location> |
| <\testname> |
| <testname=recvmsg01-sctp-udp/tcp> |
| <description> |
| Verify that recvmsg() returns the proper errno for various failure cases |
| |
| <\description> |
| <test_location> |
| <\test_location> |
| <\testname> |
| <testname=send01-sctp-udp/tcp> |
| <description> |
| Verify that send() returns the proper errno for various failure cases |
| |
| <\description> |
| <test_location> |
| <\test_location> |
| <\testname> |
| <testname=sendmsg01-sctp-udp/tcp> |
| <description> |
| Verify that sendmsg() returns the proper errno for various failure cases |
| |
| <\description> |
| <test_location> |
| <\test_location> |
| <\testname> |
| <testname=sendto01-sctp-udp/tcp> |
| <description> |
| Verify that sendto() returns the proper errno for various failure cases |
| |
| <\description> |
| <test_location> |
| <\test_location> |
| <\testname> |
| <testname=setsockopt01-sctp-udp/tcp> |
| <description> |
| Verify that setsockopt() returns the proper errno for various failure cases |
| |
| <\description> |
| <test_location> |
| <\test_location> |
| <\testname> |
| <testname=socket01-sctp-udp/tcp> |
| <description> |
| Verify that socket() returns the proper errno for various failure cases |
| |
| <\description> |
| <test_location> |
| <\test_location> |
| <\testname> |
| <testname=ltpSockets.sh> |
| <description> |
| Run basic socket related tests over UDP, TCP, and Multicast. |
| |
| <\description> |
| <test_location> |
| ltp/testcases/network/sockets/ltpSockets.sh |
| <\test_location> |
| <\testname> |
| <testname=arp01> |
| <description> |
| Test the basic functionality of `arp`. |
| |
| <\description> |
| <test_location> |
| ltp/testcases/network/tcp_cmds/arp/arp01 |
| <\test_location> |
| <\testname> |
| <testname=echo01> |
| <description> |
| Stresses the inetd/xinetd daemon using the `echo` service. |
| |
| <\description> |
| <test_location> |
| ltp/testcases/network/tcp_cmds/echo/echo01 |
| <\test_location> |
| <\testname> |
| <testname=finger01> |
| <description> |
| test the basic functionality of the `finger` command. |
| |
| <\description> |
| <test_location> |
| ltp/testcases/network/tcp_cmds/finger/finger01 |
| <\test_location> |
| <\testname> |
| <testname=ftp01> |
| <description> |
| test the basic functionality of the `ftp` command. |
| |
| <\description> |
| <test_location> |
| ltp/testcases/network/tcp_cmds/ftp/ftp01 |
| <\test_location> |
| <\testname> |
| <testname=host01> |
| <description> |
| test the basic functionality of the `host` command. |
| |
| <\description> |
| <test_location> |
| ltp/testcases/network/tcp_cmds/host/host01 |
| <\test_location> |
| <\testname> |
| <testname=netstat01> |
| <description> |
| test the basic functionality of the `netstat` command. |
| |
| <\description> |
| <test_location> |
| ltp/testcases/network/tcp_cmds/netstat/netstat01 |
| <\test_location> |
| <\testname> |
| <testname=perf_lan> |
| <description> |
| Generates LAN traffic using ICMP echo packets. |
| |
| <\description> |
| <test_location> |
| ltp/testcases/network/tcp_cmds/perf_lan |
| <\test_location> |
| <\testname> |
| <testname=ping01> |
| <description> |
| test the basic functionality of the `ping` command. |
| |
| <\description> |
| <test_location> |
| ltp/testcases/network/tcp_cmds/ping/ping01 |
| <\test_location> |
| <\testname> |
| <testname=rcp01> |
| <description> |
| test the basic functionality of the `rcp` command. |
| |
| <\description> |
| <test_location> |
| ltp/testcases/network/tcp_cmds/rcp/rcp01 |
| <\test_location> |
| <\testname> |
| <testname=rdist01> |
| <description> |
| test the basic functionality of the `rdist` command. |
| |
| <\description> |
| <test_location> |
| ltp/testcases/network/tcp_cmds/rdist/rdist01 |
| <\test_location> |
| <\testname> |
| <testname=rlogin01> |
| <description> |
| Tests the basic functionality of `rlogin`. |
| |
| <\description> |
| <test_location> |
| ltp/testcases/network/tcp_cmds/rlogin/rlogin01 |
| <\test_location> |
| <\testname> |
| <testname=rsh01> |
| <description> |
| test the basic functionality of the `rsh` command. |
| |
| <\description> |
| <test_location> |
| ltp/testcases/network/tcp_cmds/rsh/rsh01 |
| <\test_location> |
| <\testname> |
| <testname=rwho01> |
| <description> |
| test the basic functionality of the rwhod daemon using the |
| |
| <\description> |
| <test_location> |
| ltp/testcases/network/tcp_cmds/rwho/rwho01 |
| <\test_location> |
| <\testname> |
| <testname=sendfile> |
| <description> |
| Copy files from server to client using the sendfile() |
| function. |
| |
| <\description> |
| <test_location> |
| ltp/testcases/network/tcp_cmds/sendfile |
| <\test_location> |
| <\testname> |
| <testname=tcpdump> |
| <description> |
| test the basic functionality of `tcpdump`. |
| |
| <\description> |
| <test_location> |
| ltp/testcases/network/tcp_cmds/tcpdump |
| <\test_location> |
| <\testname> |
| <testname=telnet01> |
| <description> |
| Tests the basic functionality of `telnet`. |
| |
| <\description> |
| <test_location> |
| ltp/testcases/network/tcp_cmds/telnet/telnet01 |
| <\test_location> |
| <\testname> |
| <testname=traceroute_tests.sh> |
| <description> |
| Test basic functionality of `traceroute` command. |
| |
| <\description> |
| <test_location> |
| ltp/testcases/network/traceroute/traceroute_tests.sh |
| <\test_location> |
| <\testname> |
| <testname=xinetd> |
| <description> |
| Test basic functionality of `xinetd` command. |
| <\description> |
| <test_location> |
| ltp/testcases/network/xinetd |
| <\test_location> |
| <\testname> |