blob: 370b08c396dc1b14c50cd30184dd2d5bde3b6cff [file] [log] [blame]
accept01
Verify that accept() returns the proper errno for various failure cases
access01
Basic test for access(2) using F_OK, R_OK, W_OK, and X_OK arguments.
access02
Verify that access() succeeds to check the read/write/execute permissions
on a file if the mode argument passed was R_OK/W_OK/X_OK.
Also verify that, access() succeeds to test the accessibility of the file
referred to by symbolic link if the pathname points to a symbolic link.
access03
EFAULT error testing for access(2).
access04
Verify that,
1. access() fails with -1 return value and sets errno to EACCES
if the permission bits of the file mode do not permit the
requested (Read/Write/Execute) access.
2. access() fails with -1 return value and sets errno to EINVAL
if the specified access mode argument is invalid.
3. access() fails with -1 return value and sets errno to EFAULT
if the pathname points outside allocate address space for the
process.
4. access() fails with -1 return value and sets errno to ENOENT
if the specified file doesn't exist (or pathname is NULL).
5. access() fails with -1 return value and sets errno to ENAMETOOLONG
if the pathname size is > PATH_MAX characters.
access05
Verify that access() succeeds to check the existance of a file if
search access is permitted on the pathname of the specified file.
access06
EFAULT error testing for access(2).
alarm01
Basic test for alarm(2).
alarm02
Boundary Value Test for alarm(2).
alarm03
Alarm(2) cleared by a fork.
alarm04
Check that when an alarm request is made, the signal SIGALRM is received
even after the process has done an exec().
alarm05
Check the functionality of the Alarm system call when the time input
parameter is non zero.
alarm06
Check the functionality of the Alarm system call when the time input
parameter is zero.
alarm07
Check the functionality of the alarm() when the time input
parameter is non-zero and the process does a fork.
asyncio02
Write/close flushes data to the file.
bind01
Verify that bind() returns the proper errno for various failure cases
brk01
Test the basic functionality of brk.
chdir01
Check proper operation of chdir(): tests whether the
system call can it change the current, working directory, and find a
file there? Will it fail on a non-directory entry ?
chdir02
Basic test for chdir(2).
chdir03
Testcase for testing that chdir(2) sets EACCES errno
chdir04
Testcase to test whether chdir(2) sets errno correctly.
chmod01
Verify that, chmod(2) succeeds when used to change the mode permissions
of a file.
chmod02
Basic test for chmod(2).
chmod03
Verify that, chmod(2) will succeed to change the mode of a file
and set the sticky bit on it if invoked by non-root (uid != 0)
process with the following constraints,
- the process is the owner of the file.
- the effective group ID or one of the supplementary group ID's of the
process is equal to the group ID of the file.
chmod04
Verify that, chmod(2) will succeed to change the mode of a directory
and set the sticky bit on it if invoked by non-root (uid != 0) process
with the following constraints,
- the process is the owner of the directory.
- the effective group ID or one of the supplementary group ID's of the
process is equal to the group ID of the directory.
chmod05
Verify that, chmod(2) will succeed to change the mode of a directory
but fails to set the setgid bit on it if invoked by non-root (uid != 0)
process with the following constraints,
- the process is the owner of the directory.
- the effective group ID or one of the supplementary group ID's of the
process is not equal to the group ID of the directory.
chmod06
Verify that,
1) chmod(2) returns -1 and sets errno to EPERM if the effective user id
of process does not match the owner of the file and the process is
not super user.
2) chmod(2) returns -1 and sets errno to EACCES if search permission is
denied on a component of the path prefix.
3) chmod(2) returns -1 and sets errno to EFAULT if pathname points
outside user's accessible address space.
4) chmod(2) returns -1 and sets errno to ENAMETOOLONG if the pathname
component is too long.
5) chmod(2) returns -1 and sets errno to ENOTDIR if the directory
component in pathname is not a directory.
6) chmod(2) returns -1 and sets errno to ENOENT if the specified file
does not exists.
chmod07
Verify that, chmod(2) will succeed to change the mode of a file/directory
and sets the sticky bit on it if invoked by root (uid = 0) process with
the following constraints,
- the process is not the owner of the file/directory.
- the effective group ID or one of the supplementary group ID's of the
process is equal to the group ID of the file/directory.
chown01
Basic test for chown(2).
chown02
Verify that, when chown(2) invoked by super-user to change the owner and
group of a file specified by path to any numeric owner(uid)/group(gid)
values,
- clears setuid and setgid bits set on an executable file.
- preserves setgid bit set on a non-group-executable file.
chown03
Verify that, chown(2) succeeds to change the group of a file specified
by path when called by non-root user with the following constraints,
- euid of the process is equal to the owner of the file.
- the intended gid is either egid, or one of the supplementary gids
of the process.
Also, verify that chown() clears the setuid/setgid bits set on the file.
chown04
Verify that,
1) chown(2) returns -1 and sets errno to EPERM if the effective user id
of process does not match the owner of the file and the process is
not super user.
2) chown(2) returns -1 and sets errno to EACCES if search permission is
denied on a component of the path prefix.
3) chown(2) returns -1 and sets errno to EFAULT if pathname points
outside user's accessible address space.
4) chown(2) returns -1 and sets errno to ENAMETOOLONG if the pathname
component is too long.
5) chown(2) returns -1 and sets errno to ENOTDIR if the directory
component in pathname is not a directory.
6) chown(2) returns -1 and sets errno to ENOENT if the specified file
does not exists.
chown05
Verify that, chown(2) succeeds to change the owner and group of a file
specified by path to any numeric owner(uid)/group(gid) values when invoked
by super-user.
chroot01
Testcase to check the whether chroot sets errno to EPERM.
chroot02
Test functionality of chroot(2)
chroot03
Testcase to test whether chroot(2) sets errno correctly.
close01
Test that closing a regular file and a pipe works correctly
close02
Check that an invalid file descriptor returns EBADF
close08
Basic test for close(2).
connect01
Verify that connect() returns the proper errno for various failure cases
creat01
Testcase to check the basic functionality of the creat(2) system call.
creat03
Testcase to check whether the sticky bit cleared.
creat04
Testcase to check creat(2) fails with EACCES
creat05
Testcase to check that creat(2) system call returns EMFILE.
creat06
Testcase to check creat(2) sets the following errnos correctly:
1. EISDIR
2. ENAMETOOLONG
3. ENOENT
4. ENOTDIR
5. EFAULT
6. EACCES
creat07
Testcase to check creat(2) sets the following errnos correctly:
1. ETXTBSY
creat09
Basic test for creat(2) using 0700 argument.
dup01
Basic test for dup(2).
dup02
Negative test for dup(2) with bad fd.
dup03
Negative test for dup(2) (too many fds).
dup04
Basic test for dup(2) of a system pipe descriptor.
dup05
Basic test for dup(2) of a named pipe descriptor.
dup201
Negative tests for dup2() with bad fd (EBADF), and for "too many
open files" (EMFILE)
dup202
Is the access mode the same for both file descriptors?
0: read only ? "0444"
1: write only ? "0222"
2: read/write ? "0666"
dup203
Testcase to check the basic functionality of dup2().
dup204
Testcase to check the basic functionality of dup2(2).
execl01
Basic test for execl(2).
execle01
Basic test for execle(2).
execlp01
Basic test for execlp(2).
execv01
Basic test for execv(2).
execve01
Basic test for execve(2).
execve02
Testcase to check whether execve(2) sets errno to EACCES correctly
execve03
Testcase to check execve sets the following errnos correctly:
1. ENAMETOOLONG
2. ENOENT
3. ENOTDIR
4. EFAULT
5. EACCES
6. ENOEXEC
execve04
Testcase to check execve(2) sets errno to EMFILE correctly
execve05
Testcase to check execve sets the following errnos correctly:
1. ETXTBSY
execve06
This testcase tests the basic functionality of the execve(2) system
call.
execvp01
Basic test for execvp(2)
exit01
Check that exit returns the correct values to the waiting parent
exit02
Check that exit flushes output file buffers and closes files upon
exitting
fchdir01
fchdir01 - create a directory and cd into it.
fchdir02
fchdir02 - try to cd into a bad directory (bad fd).
fchmod01
Basic test for Fchmod(2).
fchmod02
Verify that, fchmod(2) will succeed to change the mode of a file/directory
set the sticky bit on it if invoked by root (uid = 0) process with
the following constraints,
- the process is not the owner of the file/directory.
- the effective group ID or one of the supplementary group ID's of the
process is equal to the group ID of the file/directory.
fchmod03
Verify that, fchmod(2) will succeed to change the mode of a file
and set the sticky bit on it if invoked by non-root (uid != 0)
process with the following constraints,
- the process is the owner of the file.
- the effective group ID or one of the supplementary group ID's of the
process is equal to the group ID of the file.
fchmod04
Verify that, fchmod(2) will succeed to change the mode of a directory
and set the sticky bit on it if invoked by non-root (uid != 0) process
with the following constraints,
- the process is the owner of the directory.
- the effective group ID or one of the supplementary group ID's of the
process is equal to the group ID of the directory.
fchmod05
Verify that, fchmod(2) will succeed to change the mode of a directory
but fails to set the setgid bit on it if invoked by non-root (uid != 0)
process with the following constraints,
- the process is the owner of the directory.
- the effective group ID or one of the supplementary group ID's of the
process is not equal to the group ID of the directory.
fchmod06
Verify that,
1) fchmod(2) returns -1 and sets errno to EPERM if the effective user id
of process does not match the owner of the file and the process is
not super user.
2) fchmod(2) returns -1 and sets errno to EBADF if the file descriptor
of the specified file is not valid.
fchmod07
Verify that, fchmod(2) succeeds when used to change the mode permissions
of a file specified by file descriptor.
fchown01
Basic test for fchown(2).
fchown02
Verify that, when fchown(2) invoked by super-user to change the owner and
group of a file specified by file descriptor to any numeric
owner(uid)/group(gid) values,
- clears setuid and setgid bits set on an executable file.
- preserves setgid bit set on a non-group-executable file.
fchown03
Verify that, fchown(2) succeeds to change the group of a file specified
by path when called by non-root user with the following constraints,
- euid of the process is equal to the owner of the file.
- the intended gid is either egid, or one of the supplementary gids
of the process.
Also, verify that fchown() clears the setuid/setgid bits set on the file.
fchown04
Verify that,
1) fchown(2) returns -1 and sets errno to EPERM if the effective user id
of process does not match the owner of the file and the process is
not super user.
2) fchown(2) returns -1 and sets errno to EBADF if the file descriptor
of the specified file is not valid.
fchown05
Verify that, fchown(2) succeeds to change the owner and group of a file
specified by file descriptor to any numeric owner(uid)/group(gid) values
when invoked by super-user.
fcntl01
Test F_DUPFD, F_SETFL cmds of fcntl
fcntl02
Basic test for fcntl(2) using F_DUPFD argument.
fcntl03
Basic test for fcntl(2) using F_GETFD argument.
fcntl04
Basic test for fcntl(2) using F_GETFL argument.
fcntl05
Basic test for fcntl(2) using F_GETLK argument.
fcntl06
Error checking conditions for remote locking of regions of a file.
fcntl07
Close-On-Exec functional test.
fcntl07B
Close-On-Exec of named pipe functional test.
fcntl08
Basic test for fcntl(2) using F_SETFL argument.
fcntl09
Basic test for fcntl(2) using F_SETLK argument.
fcntl10
Basic test for fcntl(2) using F_SETLKW argument.
fcntl11
Testcase to check locking of regions of a file
fcntl12
Testcase to test that fcntl() sets EMFILE for F_DUPFD command.
fcntl13
Testcase to test that fcntl() sets errno correctly.
fcntl14
File locking test cases for fcntl. In Linux, S_ENFMT is not implemented
in the kernel. However all standard Unix kernels define S_ENFMT as
S_ISGID. So this test defines S_ENFMT as S_ISGID.
fcntl15
Check that file locks are removed when file closed
fcntl16
Additional file locking test cases for checking proper notifictaion
of processes on lock change
fcntl17
Check deadlock detection for file locking
fcntl18
Test to check the error conditions in fcntl system call
fcntl19
Testcase to check locking of regions of a file
fcntl20
Check locking of regions of a file
fcntl21
Check locking of regions of a file
fork01
Basic test for fork(2).
fork02
Test correct operation of fork:
pid == 0 in child;
pid > 0 in parent from wait;
fork03
Check that child can use a large text space and do a large
number of operations.
fork04
Child inheritance of Environment Variables after fork().
fork05
Make sure LDT is propagated correctly
fork06
Test that a process can fork children a large number of
times in succession
fork07
Check that all children inherit parent's file descriptor
fork08
Check if the parent's file descriptors are affected by
actions in the child; they should not be.
fork09
Check that child has access to a full set of files.
fork10
Check inheritance of file descriptor by children, they
should all be refering to the same file.
fork11
Test that parent gets a pid from each child when doing wait
fpathconf
Basic test for fpathconf(2)
fstat01
Basic test for fstat(2)
fstat02
Verify that, fstat(2) succeeds to get the status of a file and fills
the stat structure elements though file pointed to by file descriptor
not opened for reading.
fstat03
Verify that, fstat(2) returns -1 and sets errno to EBADF if the file
pointed to by file descriptor is not valid.
fstat04
Verify that, fstat(2) succeeds to get the status of a file pointed by
file descriptor and fills the stat structure elements.
fstatfs01
Basic test for fstatfs(2)
fstatfs02
Testcase to check fstatfs() sets errno correctly.
fsync01
Basic test for fsync(2)
fsync02
Create a sparse file, fsync it, and time the fsync
fsync03
Testcase to check that fsync(2) sets errno correctly.
ftruncate01
Verify that, ftruncate(2) succeeds to truncate a file to a specified
length if the file indicated by file descriptor opened for writing.
ftruncate02
Verify that, ftruncate(2) succeeds to truncate a file to a certain length,
but the attempt to read past the truncated length will fail.
ftruncate03
Verify that,
1) ftruncate(2) returns -1 and sets errno to EINVAL if the specified
truncate length is less than 0.
2) ftruncate(2) returns -1 and sets errno to EBADF if the file descriptor
of the specified file is not valid.
getcwd01
Testcase to test that getcwd(2) sets errno correctly.
getcwd02
Testcase to check the basic functionality of the getcwd(2) system call.
getcwd03
Testcase to check the basic functionality of the getcwd(2) system call
for symbolically linked directories.
getdents01
getdents01 - get a directory entry
getdents02
getdents02 - check that we get a failure with a bad file descriptor
getdents03
getdents03 - check for an EINVAL error
getdents04
getdents04 - check for an ENOTDIR error
getdents05
getdents05 - check that we get a failure with a bad dirp address.
getegid01
Basic test for getegid(2)
geteuid01
Basic test for geteuid(2)
getgid01
Basic test for getgid(2)
getgid02
Testcase to check the basic functionality of getgid().
getgid03
Testcase to check the basic functionality of getegid().
getgroups01
Getgroups system call critical test
getgroups02
Basic test for getgroups(2)
getgroups03
Verify that, getgroups() system call gets the supplementary group IDs
of the calling process.
getgroups04
Verify that,
getgroups() fails with -1 and sets errno to EINVAL if the size
argument value is -ve.
gethostid01
Basic test for gethostid(2)
gethostname01
Basic test for gethostname(2)
getitimer01
getitimer01 - check that a correct call to getitimer() succeeds
getitimer02
getitimer02 - check that a getitimer() call fails as expected
with an incorrect second argument.
getitimer03
getitimer03 - check that a getitimer() call fails as expected
with an incorrect first argument.
getpeername01
Verify that getpeername() returns the proper errno for various failure cases
getpgid01
Testcase to check the basic functionality of getpgid().
getpgid02
Testcase to check the basic functionality of getpgid().
getpgrp01.c Basic test for getpgrp(2)
getpid01
Basic test for getpid(2)
getpid02
Verify that getpid() system call gets the process ID of the of the
calling process.
getppid01
Testcase to check the basic functionality of the getppid() syscall.
getpriority01
Verify that getpriority() succeeds get the scheduling priority of
the current process, process group or user.
getpriority02
Verify that,
1) getpriority() sets errno to ESRCH if no process was located
was located for 'which' and 'who' arguments.
2) getpriority() sets errno to EINVAL if 'which' argument was
not one of PRIO_PROCESS, PRIO_PGRP, or PRIO_USER.
getresgid01
Verify that getresgid() will be successful to get the real, effective
and saved user id of the calling process.
getresgid02
Verify that getresgid() will be successful to get the real, effective
and saved user ids after calling process invokes setregid() to change
the effective/saved gids to that of specified user.
getresgid03
Verify that getresgid() will be successful to get the real, effective
and saved user ids after calling process invokes setresgid() to change
the effective gid to that of specified user.
getresuid01
Verify that getresuid() will be successful to get the real, effective
and saved user id of the calling process.
getresuid02
Verify that getresuid() will be successful to get the real, effective
and saved user ids after calling process invokes setreuid() to change
the effective/saved uids to that of specified user.
getresuid03
Verify that getresuid() will be successful to get the real, effective
and saved user ids after calling process invokes setresuid() to change
the effective uid to that of specified user.
getsid01
getsid01 - call getsid() and make sure it succeeds
getsid02
getsid02 - call getsid() with an invalid PID to produce a failure
getsockname01
Verify that getsockname() returns the proper errno for various failure cases
getsockopt01
Verify that getsockopt() returns the proper errno for various failure cases
gettimeofday01
Testcase to check that gettimeofday(2) sets errno to EFAULT.
getuid01
Basic test for getuid(2)
getuid02
Testcase to check the basic functionality of the geteuid() system call.
getuid03
Testcase to check the basic functionality of the getuid() system call.
ioctl01
Testcase to check the errnos set by the ioctl(2) system call.
ioctl02
Testcase to test the TCGETA, and TCSETA ioctl implementations for
the tty driver
kill01
Test case to check the basic functionality of kill().
kill02
Sending a signal to processes with the same process group ID
kill03
Test case to check that kill fails when given an invalid signal.
kill04
Test case to check that kill() fails when passed a non-existant pid.
kill05
Test case to check that kill() fails when passed a pid owned by another
user.
kill06
Test case to check the basic functionality of kill() when killing an
entire process group with a negative pid.
kill07
Test case to check that SIGKILL can not be caught.
kill08
Test case to check the basic functionality of kill() when kill an
entire process group.
kill09
Basic test for kill(2)
kill10
Signal flooding test.
lchown01
Verify that, lchown(2) succeeds to change the owner and group of a file
specified by path to any numeric owner(uid)/group(gid) values when invoked
by super-user.
lchown02
Verify that,
1) lchown(2) returns -1 and sets errno to EPERM if the effective user id
of process does not match the owner of the file and the process is
not super user.
2) lchown(2) returns -1 and sets errno to EACCES if search permission is
denied on a component of the path prefix.
3) lchown(2) returns -1 and sets errno to EFAULT if pathname points
outside user's accessible address space.
4) lchown(2) returns -1 and sets errno to ENAMETOOLONG if the pathname
component is too long.
5) lchown(2) returns -1 and sets errno to ENOTDIR if the directory
component in pathname is not a directory.
6) lchown(2) returns -1 and sets errno to ENOENT if the specified file
does not exists.
listen01
Verify that listen() returns the proper errno for various failure cases
link02
Basic test for link(2)
link03
Multi links tests
link04
Negative test cases for link(2)
link05
Multi links (EMLINK) negative test
llseek01
Verify that, llseek() call succeeds to set the file pointer position
to an offset larger than file size. Also, verify that any attempt
to write to this location fails.
llseek02
Verify that,
1. llseek() returns -1 and sets errno to EINVAL, if the 'Whence' argument
is not a proper value.
2. llseek() returns -1 and sets errno to EBADF, if the file handle of
the specified file is not valid.
lseek01
Basic test for lseek(2)
lseek02
Negative test for lseek(2)
lseek03
Negative test for lseek(2) whence
lseek04
Negative test for lseek(2) of a fifo
lseek05
Negative test for lseek(2) of a pipe
lseek06
Verify that, lseek() call succeeds to set the file pointer position
to less than or equal to the file size, when a file is opened for
read or write.
lseek07
Verify that, lseek() call succeeds to set the file pointer position
to more than the file size, when a file is opened for reading/writing.
lseek08
Verify that, lseek() call succeeds to set the file pointer position
to the end of the file when 'whence' value set to SEEK_END and any
attempts to read from that position should fail.
lseek09
Verify that, lseek() call succeeds to set the file pointer position
to the current specified location, when 'whence' value is set to
SEEK_CUR and the data read from the specified location should match
the expected data.
lseek10
Verify that,
1. lseek() returns -1 and sets errno to ESPIPE, if the file handle of
the specified file is associated with a pipe, socket, or FIFO.
2. lseek() returns -1 and sets errno to EINVAL, if the 'Whence' argument
is not a proper value.
3. lseek() returns -1 and sets errno to EBADF, if the file handle of
the specified file is not valid.
lstat01
Verify that, lstat(2) succeeds to get the status of a file pointed to by
symlink and fills the stat structure elements.
lstat02
Basic test for lstat(2)
lstat03
Verify that,
1) lstat(2) returns -1 and sets errno to EACCES if search permission is
denied on a component of the path prefix.
2) lstat(2) returns -1 and sets errno to ENOENT if the specified file
does not exists or empty string.
3) lstat(2) returns -1 and sets errno to EFAULT if pathname points
outside user's accessible address space.
4) lstat(2) returns -1 and sets errno to ENAMETOOLONG if the pathname
component is too long.
5) lstat(2) returns -1 and sets errno to ENOTDIR if the directory
component in pathname is not a directory.
mkdir01
Basic errno test for mkdir(2)
mkdir02
This test will verify that new directory created
by mkdir(2) inherites the group ID from the parent
directory and S_ISGID bit, if the S_ISGID bit is set
in the parent directory.
mkdir03
Check mkdir() with various error conditions that should produce
EFAULT, ENAMETOOLONG, EEXIST, ENOENT and ENOTDIR
mkdir04
Attempt to create a directory in a directory having no permissions.
mkdir05
This test will verify the mkdir(2) syscall basic functionality
mkdir08
Basic test for mkdir(2)
mknod01
Basic test for mknod(2)
mknod02
Verify that mknod(2) succeeds when used to create a filesystem
node with set group-ID bit set on a directory without set group-ID bit set.
The node created should have set group-ID bit set and its gid should be
equal to that of its parent directory.
mknod03
Verify that mknod(2) succeeds when used to create a filesystem
node with set group-ID bit set on a directory with set group-ID bit set.
The node created should have set group-ID bit set and its gid should be
equal to the effective gid of the process.
mknod04
Verify that mknod(2) succeeds when used to create a filesystem
node on a directory with set group-ID bit set.
The node created should not have group-ID bit set and its gid should be
equal to the effective gid of the process.
mknod05
Verify that mknod(2) succeeds when used by root to create a filesystem
node with set group-ID bit set on a directory with set group-ID bit set.
The node created should have set group-ID bit set and its gid should be
equal to that of its parent directory.
mknod06
Verify that,
1) mknod(2) returns -1 and sets errno to EEXIST if specified path
already exists.
2) mknod(2) returns -1 and sets errno to EFAULT if pathname points
outside user's accessible address space.
3) mknod(2) returns -1 and sets errno to ENOENT if the directory
component in pathname does not exist.
4) mknod(2) returns -1 and sets errno to ENAMETOOLONG if the pathname
component was too long.
5) mknod(2) returns -1 and sets errno to ENOTDIR if the directory
component in pathname is not a directory.
mknod07
Verify that,
1) mknod(2) returns -1 and sets errno to EPERM if the process id of
the caller is not super-user.
2) mknod(2) returns -1 and sets errno to EACCES if parent directory
does not allow write permission to the process.
mknod08
Verify that mknod(2) succeeds when used to create a filesystem
node on a directory without set group-ID bit set. The node created
should not have set group-ID bit set and its gid should be equal to that
of its parent directory.
mmap001
Tests mmapping a big file and writing it once
mmap01
Verify that, mmap() succeeds when used to map a file where size of the
file is not a multiple of the page size, the memory area beyond the end
of the file to the end of the page is accessible. Also, verify that
this area is all zeroed and the modifications done to this area are
not written to the file.
mmap02
Call mmap() with prot parameter set to PROT_READ and with the file
descriptor being open for read, to map a file creating mapped memory
with read access. The minimum file permissions should be 0444.
mmap03
Call mmap() to map a file creating a mapped region with execute access
under the following conditions -
- The prot parameter is set to PROT_EXE
- The file descriptor is open for read
- The file being mapped has execute permission bit set.
- The minimum file permissions should be 0555.
The call should succeed to map the file creating mapped memory with the
required attributes.
mmap04
Call mmap() to map a file creating a mapped region with read/exec access
under the following conditions -
- The prot parameter is set to PROT_READ|PROT_EXEC
- The file descriptor is open for read
- The file being mapped has read and execute permission bit set.
- The minimum file permissions should be 0555.
The call should succeed to map the file creating mapped memory with the
required attributes.
mmap05
Call mmap() to map a file creating mapped memory with no access under
the following conditions -
- The prot parameter is set to PROT_NONE
- The file descriptor is open for read(any mode other than write)
- The minimum file permissions should be 0444.
The call should succeed to map the file creating mapped memory with the
required attributes.
mmap06
Call mmap() to map a file creating a mapped region with read access
under the following conditions -
- The prot parameter is set to PROT_READ
- The file descriptor is open for writing.
The call should fail to map the file.
mmap07
Call mmap() to map a file creating a mapped region with read access
under the following conditions -
- The prot parameter is set to PROT_WRITE
- The file descriptor is open for writing.
- The flags parameter has MAP_PRIVATE set.
The call should fail to map the file.
mmap08
Verify that mmap() fails to map a file creating a mapped region
when the file specified by file descriptor is not valid.
modify_ldt01
Testcase to check the error conditions for modify_ldt(2)
modify_ldt02
Testcase to check the error conditions for modify_ldt(2)
mprotect01
Testcase to check the error conditions for mprotect(2)
mprotect02
Testcase to check the mprotect(2) system call.
mprotect03
Testcase to check the mprotect(2) system call.
mremap01
Verify that, mremap() succeeds when used to expand the existing
virtual memory mapped region to the requested size where the
virtual memory area was previously mapped to a file using mmap().
mremap02
Verify that,
mremap() fails when used to expand the existing virtual memory mapped
region to the requested size, if the virtual memory area previously
mapped was not page aligned or invalid argument specified.
mremap03
Verify that,
mremap() fails when used to expand the existing virtual memory mapped
region to the requested size, if there already exists mappings that
cover the whole address space requsted or the old address specified was
not mapped.
mremap04
Verify that,
mremap() fails when used to expand the existing virtual memory mapped
region to the requested size, if the memory area cannot be expanded at
the current virtual address and MREMAP_MAYMOVE flag not set.
msgctl01
msgctl01 - create a message queue, then issue the IPC_STAT command
and RMID commands to test the functionality
msgctl02
msgctl02 - create a message queue, then issue the IPC_SET command
to lower the msg_qbytes value.
msgctl03
msgctl03 - create a message queue, then issue the IPC_RMID command
msgctl04
msgctl04 - test for EACCES, EFAULT and EINVAL errors using
a variety of incorrect calls.
msgctl05
msgctl05 - test for EPERM error
msgget01
msgget01 - create a message queue, write a message to it and
read it back.
msgget02
msgget02 - test for EEXIST and ENOENT errors
msgget03
msgget03 - test for an ENOSPC error by using up all available
message queues.
msgget04
msgget04 - test for an EACCES error by creating a message queue
with no read or write permission and then attempting
to access it with various permissions.
msgrcv01
msgrcv01 - test that msgrcv() receives the expected message
msgrcv02
msgrcv02 - test for EACCES and EFAULT errors
msgrcv03
msgrcv03 - test for EINVAL error
msgrcv04
msgrcv04 - test for E2BIG and ENOMSG errors
msgrcv05
msgrcv05 - test for EINTR error
msgrcv06
msgrcv06 - test for EIDRM error
msgsnd01
msgsnd01 - test that msgsnd() enqueues a message correctly
msgsnd02
msgsnd02 - test for EACCES and EFAULT errors
msgsnd03
msgsnd03 - test for EINVAL error
msgsnd04
msgsnd04 - test for EAGAIN error
msgsnd05
msgsnd05 - test for EINTR error
msgsnd06
msgsnd06 - test for EIDRM error
msync01
Verify that, msync() succeeds, when the region to synchronize, is part
of, or all of a mapped region.
msync02
Verify that msync() succeeds when the region to synchronize is mapped
shared and the flags argument is MS_INVALIDATE.
msync03
Verify that, msync() fails, when the region to synchronize, is outside
the address space of the process.
msync04
Verify that, msync() fails, when the region to synchronize, is mapped
but the flags argument is invalid.
msync05
Verify that, msync() fails, when the region to synchronize, was not
mapped.
munmap01
Verify that, munmap call will succeed to unmap a mapped file or
anonymous shared memory region from the calling process's address space
and after successful completion of munmap, the unmapped region is no
longer accessible.
munmap02
Verify that, munmap call will succeed to unmap a mapped file or
anonymous shared memory region from the calling process's address space
if the region specified by the address and the length is part or all of
the mapped region.
munmap03
Verify that, munmap call will fail to unmap a mapped file or anonymous
shared memory region from the calling process's address space if the
address and the length of the region to be unmapped points outside the
calling process's address space
nanosleep01
Verify that nanosleep() will be successful to suspend the execution
of a process for a specified time.
nanosleep02
Verify that nanosleep() will be successful to suspend the execution
of a process, returns after the receipt of a signal and writes the
remaining sleep time into the structure.
nanosleep03
Verify that nanosleep() will fail to suspend the execution
of a process for a specified time if interrupted by a non-blocked signal.
nanosleep04
Verify that nanosleep() will fail to suspend the execution
of a process if the specified pause time is invalid.
nice01
Verify that root can provide a negative value to nice()
and hence root can decrease the nice value of the process
using nice() system call
nice02
Verify that any user can successfully increase the nice value of
the process by passing a higher increment value (> max. applicable limits)
to nice() system call.
nice03
Verify that any user can successfully increase the nice value of
the process by passing an increment value (< max. applicable limits) to
nice() system call.
nice04
Verify that, nice(2) fails when, a non-root user attempts to increase
the priority of a process by specifying a negative increment value.
nice05
Basic test for nice(2)
open01
Open a file with oflag = O_CREAT set, does it set the sticky bit off?
Open "/tmp" with O_DIRECTORY, does it set the S_IFDIR bit on?
open02
Test if open without O_CREAT returns -1 if a file does not exist.
open03
Basic test for open(2)
open04
Testcase to check that open(2) sets EMFILE if a process opens files
more than its descriptor size
open05
Testcase to check open(2) sets errno to EACCES correctly.
open06
Testcase to check open(2) sets errno to ENXIO correctly.
open07
Test the open(2) system call to ensure that it sets ELOOP correctly.
open08
Check for the following errors:
1. EEXIST
2. EISDIR
3. ENOTDIR
4. ENAMETOOLONG
5. EFAULT
6. ETXTBSY
pathconf01
Basic test for pathconf(2)
pause01
Basic test for pause(2)
pause02
Verify that, pause() returns -1 and sets errno to EINTR after receipt
of a signal which is caught by the calling process. Also, verify that
the calling process will resume execution from the point of suspension.
pause03
Verify that a process is no longer accessible on receipt of SIGKILL
signal after being suspended by pause().
personality01
personality01 - Check that we can set the personality for a process.
personality02
personality02 - Check that we get EINVAL for a bad personality.
pipe01
Testcase to check the basic functionality of the pipe(2) syscall:
Check that both ends of the pipe (both file descriptors) are
available to a process opening the pipe.
pipe05
Check what happens when pipe is passed a bad file descriptor.
pipe06
Check what happens when the system runs out of pipes.
pipe08
Check that a SIGPIPE signal is generated when a write is
attempted on an empty pipe.
pipe09
Check that two processes can use the same pipe at the same time.
pipe10
Check that parent can open a pipe and have a child read from it
pipe11
Check if many children can read what is written to a pipe by the
parent.
poll01
Verify that valid open file descriptor must be provided to poll() to
succeed.
pread01
Verify the functionality of pread() by writing known data using pwrite()
to the file at various specified offsets and later read from the file from
various specified offsets, comparing the data read aganist the data
written.
pread02
Verify that,
1) pread() fails when attempted to read from an unnamed pipe.
2) pread() fails if the specified offset position was invalid.
pwrite01
Verify the functionality of pwrite() by writing known data using pwrite()
to the file at various specified offsets and later read from the file from
various specified offsets, comparing the data written aganist the data
read using read().
pwrite02
Verify that,
1) pwrite() fails when attempted to write to an unnamed pipe.
2) pwrite() fails if the specified offset position was invalid.
read01
Basic test for the read(2) system call
read02
test 1:
Does read return -1 if file descriptor is not valid, check for EBADF
test 2:
Check if read sets EISDIR, if the fd refers to a directory
test 3:
Check if read sets EFAULT, if buf is -1.
read03
Testcase to check that read() sets errno to EAGAIN
read04
Testcase to check if read returns the number of bytes read correctly.
readlink01
Verify that, readlink will succeed to read the contents of the symbolic
link created the process.
readlink02
Basic test for the readlink(2) system call
readlink03
Verify that,
1) readlink(2) returns -1 and sets errno to EACCES if search/write
permission is denied in the directory where the symbolic link
resides.
2) readlink(2) returns -1 and sets errno to EINVAL if the buffer size
is not positive.
3) readlink(2) returns -1 and sets errno to EINVAL if the specified
file is not a symbolic link file.
4) readlink(2) returns -1 and sets errno to ENAMETOOLONG if the
pathname component of symbolic link is too long (ie, > PATH_MAX).
5) readlink(2) returns -1 and sets errno to ENOENT if the component of
symbolic link points to an empty string.
readlink04
Verify that, readlink call will succeed to read the contents of the
symbolic link if invoked by non-root user who is not the owner of the
symbolic link.
readv01
Testcase to check the basic functionality of the readv(2) system call.
readv02
Testcase to check the error conditions of the readv(2) system call.
recv01
Verify that recv() returns the proper errno for various failure cases
recvfrom01
Verify that recvfrom() returns the proper errno for various failure cases
recvmsg01
Verify that recvmsg() returns the proper errno for various failure cases
rename01
This test will verify the rename(2) syscall basic functionality.
Verify rename() works when the "new" file or directory does not exist.
rename02
Basic test for the rename(2) system call
rename03
This test will verify that rename(2) functions correctly
when the "new" file or directory exists
rename04
This test will verify that rename(2) failed when newpath is
a non-empty directory and return EEXIST or ENOTEMPTY
rename05
This test will verify that rename(2) fails with EISDIR
rename06
This test will verify that rename(2) failed in EINVAL
rename07
This test will verify that rename(2) failed in ENOTDIR
rename08
This test will verify that rename(2) syscall failed in EFAULT
rename09
check rename() fails with EACCES
rename10
This test will verify that rename(2) syscall fails with ENAMETOOLONG
and ENOENT
rename11
This test will verify that rename(2) failed in EBUSY
rename12
check rename() fails with EPERM
rename13
Verify rename() return successfully and performs no other action
when "old" file and "new" file link to the same file.
rmdir01
This test will verify that rmdir(2) syscall basic functionality.
verify rmdir(2) returns a value of 0 and the directory being
removed
rmdir02
This test will verify that rmdir(2) fail in
1. ENOTEMPTY
2. EBUSY
3. ENAMETOOLONG
4. ENOENT
5. ENOTDIR
6. EFAULT
7. EFAULT
rmdir03
check rmdir() fails with EPERM or EACCES
rmdir04
Basic test for the rmdir(2) system call
rmdir05
Verify that rmdir(2) returns a value of -1 and sets errno to indicate the error.
sbrk01
Basic test for the sbrk(2) system call.
sched_getscheduler01
Testcase to check sched_getscheduler() returns correct return value
sched_getscheduler02
To check for the errno ESRCH
sched_setscheduler01
Testcase to test whether sched_setscheduler(2) sets the errnos
correctly.
sched_setscheduler02
Testcase to test whether sched_setscheduler(2) sets the errnos
correctly.
sched_yield01
Testcase to check that sched_yield returns correct values.
select01
Basic test for the select(2) system call to a fd of regular file with no I/O
and small timeout
select02
Basic test for the select(2) system call to fd of system pipe with no I/O
and small timeout
select03
Basic test for the select(2) system call to fd of a named-pipe (FIFO)
select04
Verify that select(2) returns immediately (does not block) if the
timeout value is zero.
select05
Verify that select(2) fails when one or more of the file descriptor sets
specify a file descriptor which is not valid.
select06
Verify that select(2) fails when a signal is delivered before any of the
selected events occur and before the timeout interval expires.
select07
Verify that select(2) fails when an invalid timeout interval is specified.
select08
Verify the functionality of select(2) by passing non-null writefds
which points to a regular file, pipes or FIFO's.
select09
Verify the functionality of select(2) by passing non-null readfds
which points to a regular file, pipes or FIFO's.
select10
Verify that a successful call to select() shall return the desired
number of modified descriptors for which bits are set in the bit masks,
where descriptors points to a regular file, pipes or FIFO's.
semctl01
semctl01 - test the 10 possible semctl() commands
semctl02
semctl02 - test for EACCES error
semctl03
semctl03 - test for EINVAL and EFAULT errors
semctl04
semctl04 - test for EPERM error
semctl05
semctl05 - test for ERANGE error
semget01
semget01 - test that semget() correclty creates a semaphore set
semget02
semget02 - test for EACCES and EEXIST errors
semget03
semget03 - test for ENOENT error
semget05
semget05 - test for ENOSPC error
semget06
semget06 - test for EINVAL error
semop01
semop01 - test that semop() basic functionality is correct
semop02
semop02 - test for E2BIG, EACCES, EFAULT and EINVAL errors
semop03
semop03 - test for EFBIG error
semop04
semop04 - test for EAGAIN error
semop05
semop05 - test for EINTR and EIDRM errors
send01
Verify that send() returns the proper errno for various failure cases
sendfile02
Testcase to test the basic functionality of the sendfile(2) system call.
sendfile03
Testcase to test that sendfile(2) system call returns appropriete
errnos on error.
sendmsg01
Verify that sendmsg() returns the proper errno for various failure cases
sendto01
Verify that sendto() returns the proper errno for various failure cases
setfsgid01
Testcase to check the basic functionality of setfsgid(2) system
call.
setfsuid01
Testcase to test the basic functionality of the setfsuid(2) system
call.
setgid01
Basic test for the setgid(2) system call.
setgid02
Testcase to ensure that the setgid() system call sets errno to EPERM
setgroups01
Basic test for the setgroups(2) system call.
setgroups02
Verify that,
1. setgroups() fails with -1 and sets errno to EINVAL if the size
argument value is > NGROUPS
2. setgroups() fails with -1 and sets errno to EPERM if the
calling process is not super-user.
setgroups03
Verify that, only root process can invoke setgroups() system call to
set the supplementary group IDs of the process.
setitimer01
setitimer01 - check that a resonable setitimer() call succeeds.
setitimer02
setitimer02 - check that a setitimer() call fails as expected
with incorrect values.
setitimer03
setitimer03 - check that a setitimer() call fails as expected
with incorrect values.
setpgid01
Basic test for setpgid(2) system call.
setpgid02
Testcase to check that setpgid() sets errno correctly.
setpgid03
Test to check the error and trivial conditions in setpgid system call
setpgrp01
Basic test for the setpgrp(2) system call.
setpgrp02
Testcase to check the basic functionality of the setpgrp(2) syscall.
setpriority01
setpriority01 - set the priority for the test process lower.
setpriority02
setpriority02 - test for an expected failure by trying to raise
the priority for the test process while not having
permissions to do so.
setpriority03
setpriority03 - test for an expected failure by using an invalid
PRIO value
setpriority04
setpriority04 - test for an expected failure by using an invalid
process id
setpriority05
setpriority05 - test for an expected failure by trying to change
a process with an ID that is different from the
test process
setregid01
Basic test for the setregid(2) system call.
setregid02
Test that setregid() fails and sets the proper errno values when a
non-root user attemps to change the real or effective group id to a
value other than the current gid or the current effective gid.
setregid03
Test setregid() when executed by a non-root user.
setregid04
Test setregid() when executed by root.
setresuid01
Test setresuid() when executed by root.
setresuid02
Test that a non-root user can change the real, effective and saved
uid values through the setresuid system call.
setresuid03
Test that the setresuid system call sets the proper errno
values when a non-root user attempts to change the real, effective or
saved uid to a value other than one of the current uid, the current
effective uid of the current saved uid. Also verify that setresuid
fails if an invalid uid value is given.
setreuid01
Basic test for the setreuid(2) system call.
setreuid02
Test setreuid() when executed by root.
setreuid03
Test setreuid() when executed by an unpriviledged user.
setreuid04
Test that root can change the real and effective uid to an
unpriviledged user.
setreuid05
Test the setreuid() feature, verifying the role of the saved-set-uid
and setreuid's effect on it.
setreuid06
Test that EINVAL is set when setreuid is given an invalid user id.
setrlimit01
Testcase to check the basic functionality of the setrlimit system call.
setrlimit02
Testcase to test the different errnos set by setrlimit(2) system call.
setrlimit03
Test for EPERM when the super-user tries to increase RLIMIT_NOFILE
beyond the system limit.
setsid01
Test to check the error and trivial conditions in setsid system call
setsockopt01
Verify that setsockopt() returns the proper errno for various failure cases
settimeofday01
Testcase to check the basic functionality of settimeofday().
settimeofday02
Testcase to check that settimeofday() sets errnos correctly.
setuid01
Basic test for the setuid(2) system call.
setuid02
Basic test for the setuid(2) system call as root.
setuid03
Test to check the error and trivial conditions in setuid
shmat01
shmat01 - test that shmat() works correctly
shmat02
shmat02 - check for EINVAL and EACCES errors
shmat03
shmat03 - test for EACCES error
shmctl01
shmctl01 - test the IPC_STAT, IPC_SET and IPC_RMID commands as
they are used with shmctl()
shmctl02
shmctl02 - check for EACCES, EFAULT and EINVAL errors
shmctl03
shmctl03 - check for EACCES, and EPERM errors
shmdt01
shmdt01 - check that shared memory is detached correctly
shmdt02
shmdt02 - check for EINVAL error
shmget01
shmget01 - test that shmget() correctly creates a shared memory segment
shmget02
shmget02 - check for ENOENT, EEXIST and EINVAL errors
shmget03
shmget03 - test for ENOSPC error
shmget04
shmget04 - test for EACCES error
shmget05
shmget05 - test for EACCES error
sigaction01
Test some features of sigaction (see below for more details)
sigaction02
Testcase to check the basic errnos set by the sigaction(2) syscall.
sigaltstack01
Send a signal using the main stack. While executing the signal handler
compare a variable's address lying on the main stack with the stack
boundaries returned by sigaltstack().
sigaltstack02
Verify that,
1. sigaltstack() fails and sets errno to EINVAL when "ss_flags" field
pointed to by 'ss' contains invalid flags.
2. sigaltstack() fails and sets errno to ENOMEM when the size of alternate
stack area is less than MINSIGSTKSZ.
sighold02
Basic test for the sighold02(2) system call.
signal01
signal01 - set the signal handler to our own function
signal02
signal02 - Test that we get an error using illegal signals
signal03
Boundary value and other invalid value checking of signal setup and signal
sending.
signal04
signal04 - restore signals to default behavior
signal05
signal03 - set signals to be ignored
sigprocmask01
Verify that sigprocmask() succeeds to examine and change the calling
process's signal mask.
Also, verify that sigpending() succeeds to store signal mask that are
blocked from delivery and pending for the calling process.
sigrelse01
Basic test for the sigrelse(2) system call.
sigsuspend01
Verify that sigsuspend() succeeds to change process's current signal
mask with the specified signal mask and suspends the process execution
until the delivery of a signal.
socket01
Verify that socket() returns the proper errno for various failure cases
socketpair01
Verify that socketpair() returns the proper errno for various failure cases
sockioctl01
Verify that ioctl() on sockets returns the proper errno for various
failure cases
stat01
Verify that, stat(2) succeeds to get the status of a file and fills the
stat structure elements.
stat02
Verify that, stat(2) succeeds to get the status of a file and fills the
stat structure elements though process doesn't have read access to the
file.
stat03
Verify that,
1) stat(2) returns -1 and sets errno to EACCES if search permission is
denied on a component of the path prefix.
2) stat(2) returns -1 and sets errno to ENOENT if the specified file
does not exists or empty string.
3) stat(2) returns -1 and sets errno to EFAULT if pathname points
outside user's accessible address space.
4) stat(2) returns -1 and sets errno to ENAMETOOLONG if the pathname
component is too long.
5) stat(2) returns -1 and sets errno to ENOTDIR if the directory
component in pathname is not a directory.
stat05
Basic test for the stat05(2) system call.
statfs01
Basic test for the statfs(2) system call.
statfs02
Testcase to check that statfs(2) sets errno correctly.
stime01
Verify that the system call stime() successfully sets the system's idea
of data and time if invoked by "root" user.
stime02
Verify that the system call stime() fails to set the system's idea
of data and time if invoked by "non-root" user.
symlink01
Test of various file function calls, such as rename or open, on a symbolic
link file.
symlink02
Basic test for the symlink(2) system call.
symlink03
Verify that,
1) symlink(2) returns -1 and sets errno to EACCES if search/write
permission is denied in the directory where the symbolic link is
being created.
2) symlink(2) returns -1 and sets errno to EEXIST if the specified
symbolic link already exists.
3) symlink(2) returns -1 and sets errno to EFAULT if the specified
file or symbolic link points to invalid address.
4) symlink(2) returns -1 and sets errno to ENAMETOOLONG if the
pathname component of symbolic link is too long (ie, > PATH_MAX).
5) symlink(2) returns -1 and sets errno to ENOTDIR if the directory
component in pathname of symbolic link is not a directory.
6) symlink(2) returns -1 and sets errno to ENOENT if the component of
symbolic link points to an empty string.
symlink04
Verify that, symlink will succeed to creat a symbolic link of an existing
object name path.
symlink05
Verify that, symlink will succeed to creat a symbolic link of an
non-existing object name path.
sync01
Basic test for the sync(2) system call.
sync02
Open a file for write; modify the file, then do a sync().
Verify that the data has been written to disk by re-opening the file.
sysctl01
Testcase for testing the basic functionality of sysctl(2) system call.
This testcase attempts to read the kernel parameters using
sysctl({CTL_KERN, KERN_ }, ...) and compares it with the known
values.
sysctl03
Testcase to check that sysctl(2) sets errno to EPERM correctly.
sysctl04
Testcase to check that sysctl(2) sets errno to ENOTDIR
sysctl05
Testcase to check that sysctl(2) sets errno to EFAULT
time01
Basic test for the time(2) system call.
time02
Verify that time(2) returns the value of time in seconds since
the Epoch and stores this value in the memory pointed to by the parameter.
times01
Basic test for the times(2) system call.
times02
Testcase to test that times() sets errno correctly
times03
Testcase to check the basic functionality of the times() system call.
truncate01
Verify that, truncate(2) succeeds to truncate a file to a specified
length.
truncate02
Verify that, truncate(2) succeeds to truncate a file to a certain length,
but the attempt to read past the truncated length will fail.
truncate03
Verify that,
1) truncate(2) returns -1 and sets errno to EACCES if search/write
permission denied for the process on the component of the path prefix
or named file.
2) truncate(2) returns -1 and sets errno to ENOTDIR if the component of
the path prefix is not a directory.
3) truncate(2) returns -1 and sets errno to EFAULT if pathname points
outside user's accessible address space.
4) truncate(2) returns -1 and sets errno to ENAMETOOLONG if the component
of a pathname exceeded 255 characters or entire pathname exceeds 1023
characters.
5) truncate(2) returns -1 and sets errno to ENOENT if the named file
does not exist.
ulimit01
Basic test for the ulimit(2) system call.
umask01
Basic test for the umask(2) system call.
umask02
Check that umask changes the mask, and that the previous
value of the mask is returned correctly for each value.
umask03
Check that umask changes the mask, and that the previous
value of the mask is returned correctly for each value.
uname01
Basic test for the uname(2) system call.
uname02
Call uname() with an invalid address to produce a failure
uname03
Call uname() and make sure it succeeds
unlink05
Basic test for the unlink(2) system call.
unlink06
Test for the unlink(2) system call of a FIFO.
unlink07
Tests for error handling for the unlink(2) system call.
unlink08
More tests for error handling for the unlink(2) system call.
utime01
Verify that the system call utime() successfully sets the modification
and access times of a file to the current time, if the times argument
is null, and the user ID of the process is "root".
utime02
Verify that the system call utime() successfully sets the modification
and access times of a file to the current time, under the following
constraints,
- The times argument is null.
- The user ID of the process is not "root".
- The file is owned by the user ID of the process.
utime03
Verify that the system call utime() successfully sets the modification
and access times of a file to the current time, under the following
constraints,
- The times argument is null.
- The user ID of the process is not "root".
- The file is not owned by the user ID of the process.
- The user ID of the process has write access to the file.
utime04
Verify that the system call utime() successfully sets the modification
and access times of a file to the time specified by times argument, if
the times argument is not null, and the user ID of the process is "root".
utime05
Verify that the system call utime() successfully sets the modification
and access times of a file to the value specified by the times argument
under the following constraints,
- The times argument is not null,
- The user ID of the process is not "root".
- The file is owned by the user ID of the process.
utime06
1. Verify that the system call utime() fails to set the modification
and access times of a file to the current time, under the following
constraints,
- The times argument is null.
- The user ID of the process is not "root".
- The file is not owned by the user ID of the process.
- The user ID of the process does not have write access to the
file.
2. Verify that the system call utime() fails to set the modification
and access times of a file if the specified file doesn't exist.
vfork01
Fork a process using vfork() and verify that, the attribute values like
euid, ruid, suid, egid, rgid, sgid, umask, inode and device number of
root and current working directories are same as that of the parent
process.
vfork02
Fork a process using vfork() and verify that, the pending signals in
the parent are not pending in the child process.
vhangup01
Check the return value, and errno of vhangup(2)
when a non-root user calls vhangup().
vhangup02
To test the basic functionality of vhangup(2)
wait02
Basic test for wait(2) system call.
wait401
wait401 - check that a call to wait4() correctly waits for a child
process to exit
wait402
wait402 - check for ECHILD errno when using an illegal pid value
waitpid01
Check that when a child kills itself by generating an alarm
exception, the waiting parent is correctly notified.
waitpid02
Check that when a child kills itself by generating an integer zero
divide exception, the waiting parent is correctly notified.
waitpid03
Check that parent waits unitl specific child has returned.
waitpid04
test to check the error conditions in waitpid sys call
waitpid05
Check that when a child kills itself with a kill statement after
determining its process id by using getpid, the parent receives a
correct report of the cause of its death. This also indirectly
checks that getpid returns the correct process id.
waitpid06
Tests to see if pid's returned from fork and waitpid are same.
waitpid07
Tests to see if pid's returned from fork and waitpid are same.
waitpid08
Tests to see if pid's returned from fork and waitpid are same
waitpid09
Check ability of parent to wait until child returns, and that the
child's process id is returned through the waitpid. Check that
waitpid returns immediately if no child is present.
waitpid10
Tests to see if pid's returned from fork and waitpid are same
waitpid11
Tests to see if pid's returned from fork and waitpid are same
waitpid12
Tests to see if pid's returned from fork and waitpid are same
waitpid13
Tests to see if pid's returned from fork and waitpid are same
write01
Basic test for write(2) system call.
write02
Basic functionality test: does the return from write match the count
of the number of bytes written.
write03
Testcase to check that write(2) doesn't corrupt a file when it fails
write04
Testcase to check that write() sets errno to EAGAIN
write05
Check the return value, and errnos of write(2)
- when the file descriptor is invalid - EBADF
- when the buf parameter is invalid - EFAULT
- on an attempt to write to a pipe that is not open for reading - EPIPE
writev01
Testcase to check the basic functionality of writev(2) system call.
writev02
In these testcases, writev() is called with partially valid data
to be written in a sparse file.
writev03
The testcases are written calling writev() with partially valid data
to overwrite the contents, to write in the beginning and to write in
the end of the file.
writev04
The testcases are written calling writev() with partially valid data
to overwrite the contents, to write in the beginning and to write in
the end of the file. This is same as writev03, but the length of
buffer used here is 8192 bytes.
writev05
These testcases are written to test writev() on sparse files. This
is same as writev02. But the initial write() with valid data is
done at the beginning of the file.