| #DESCRIPTION:A small subset of the syscalls |
| access01 access01 |
| # Basic test for access(2) using F_OK, R_OK, W_OK and X_OK arguments. |
| access03 access03 |
| # EFAULT error testing for access(2) |
| alarm02 alarm02 |
| # Boundary Value Test for alarm(2) |
| # TEST CASES |
| # Test Case One - A call to alarm() shall not return an error if |
| # seconds is a -1. |
| # Test FAILS if a non-zero value is returned. |
| # Test Case Two - A call to alarm() shall not return an error if |
| # seconds is the maximum unsigned integer (2**63). |
| # Test FAILS if a non-zero value is returned. |
| # Test Case Three - A call to alarm() shall not return an error if |
| # seconds is the maximum unsigned integer plus 1 ((2**63)+1). |
| # Test FAILS if a non-zero value is returned. |
| alarm03 alarm03 |
| # alarm(2) cleared by a fork |
| # TEST CASES |
| # 1.) alarm(100), fork, child's alarm(0) shall return 0; |
| # 2.) alarm(100), fork, parent's alarm(0) shall return non-zero. |
| brk01 brk01 |
| # Basic test for brk() |
| # TEST CASES |
| # 1.) brk(2) returns... |
| chdir02 chdir02 |
| # Basic test for chdir(2) |
| # TEST CASES |
| # 1.) chdir(2) returns... |
| chmod02 chmod02 |
| # Basic test for chmod(2) |
| # TEST CASES |
| # 1.) chmod(2) returns... |
| chown01 chown01 |
| # Basic test for chown(2) |
| # TEST CASES |
| # 1.) chown(2) returns... |
| close08 close08 |
| # Basic test for close(2) |
| # TEST CASES |
| # 1.) close(2) returns... |
| dup01 dup01 |
| # Basic test for dup(2) |
| # TEST CASES |
| # 1.) dup(2) returns...(See Description) |
| dup02 dup02 |
| # Negative test for dup(2) with bad fd |
| # TEST CASES |
| # 1-?.) dup(2) returns -1 with errno set to EBADF...(See Description) |
| dup03 dup03 |
| # Negative test for dup(2) (too many fds) |
| dup04 dup04 |
| # Basic test for dup(2) of a system pipe descriptor |
| dup05 dup05 |
| # Basic test for dup(2) of a named pipe descriptor |
| execl01 execl01 |
| # Basic test for execl(2) |
| execle01 execle01 |
| # Basic test for execle(2) |
| execlp01 execlp01 |
| # Basic test for execlp(2 |
| execv01 execv01 |
| # Basic test for execv(2) |
| execve01 execve01 |
| # Basic test for execve(2) |
| execvp01 execvp01 |
| # Basic test for execvp(2) |
| f00f f00f |
| # This is a simple test for handling of the pentium f00f bug. |
| # It is an example of a catistrophic test case. If the system |
| # doesn't correctly handle this test, it will likely lockup. |
| fchmod01 fchmod01 |
| # Basic test for fchmod(2) using 0700 argument. |
| fchown01 fchown01 |
| # Basic test for fchown(2) |
| fcntl02 fcntl02 |
| # Basic test for fcntl(2) using F_DUPFD argument |
| fcntl03 fcntl03 |
| # Basic test for fcntl(2) using F_GETFD argument |
| fcntl04 fcntl04 |
| # Basic test for fcntl(2) using F_GETFL argument |
| fcntl05 fcntl05 |
| # Basic test for fcntl(2) using F_GETLK argument |
| fcntl07 fcntl07 |
| # Close-On-Exec of named pipe functional test |
| fcntl08 fcntl08 |
| # Basic test for fcntl(2) using F_SETFL argument |
| fcntl09 fcntl09 |
| # Basic test for fcntl(2) using F_SETLK argument |
| fcntl10 fcntl10 |
| # Basic test for fcntl(2) using F_SETLKW argument |
| fork01 fork01 |
| # Basic test for fork(2) |
| # TEST CASES |
| # 1.) fork returns without error |
| # 2.) fork returns the pid of the child |
| fork04 fork04 |
| # Child inheritance of Environment Variables after fork() |
| # TEST CASES |
| # Test these environment variables correctly inherited by child: |
| # 1. TERM |
| # 2. NoTSetzWq |
| # 3. TESTPROG |
| fork05 fork05 |
| # This is a test sent in my Ulrich Drepper to test for a bug in fork() where |
| # %gs is not handled correctly. See fork05.c for a copy of Ulrich's email |
| fpathconf01 fpathconf01 |
| # Basic test for fpathconf(2) |
| fstatfs01 fstatfs01 |
| # Basic test for fstatfs(2) |
| fsync01 fsync01 |
| # Basic test for fsync(2) |
| getegid01 getegid01 |
| # Basic test for getegid(2) |
| geteuid01 geteuid01 |
| # Basic test for geteuid(2) |
| getgid01 getgid01 |
| # Basic test for getgid(2) |
| getgroups01 getgroups01 |
| # Getgroups system call critical test |
| # TEST CASES |
| # 1. Check to see if getgroups(-1, gidset) fails and sets errno to EINVAL |
| # 2. Check to see if getgroups(0, gidset) does not return -1 and gidset is |
| # not modified. |
| # 3. Check to see if getgroups(x, gigset) fails and sets errno to EINVAL, |
| # where x is one less then what is returned by getgroups(0, gidset). |
| # 4. Check to see if getgroups() succeeds and gidset contains |
| # group id returned from getgid(). |
| gethostid01 gethostid01 |
| # Basic test for gethostid(2) |
| gethostname01 gethostname01 |
| # Basic test for gethostname(2) |
| getpgrp01 getpgrp01 |
| # Basic test for getpgrp(2) |
| getpid01 getpid01 |
| # Basic test for getpid(2) |
| getppid01 getppid01 |
| # Basic test for getppid(2) |
| getuid01 getuid01 |
| # Basic test for getuid(2) |
| kill02 kill02 |
| # Sending a signal to processes with the same process group ID. |
| kill09 kill09 |
| # Basic test for kill(2) |
| link02 link02 |
| # Basic test for link(2) |
| link03 link03 |
| # multi links tests |
| link04 link04 |
| # Negative test cases for link(2) |
| link05 link05 |
| # multi links (EMLINK) negative test |
| lseek01 lseek01 |
| lseek02 lseek02 |
| lseek07 lseek07 |
| lseek11 lseek11 |
| # Negative test for lseek(2) of a pipe |
| lstat02 lstat02 |
| # Basic test for lstat(2) |
| qmm01 mmap001 -m 1 |
| # Basic mmap() test. |
| open03 open03 |
| # Basic test for open(2) |
| pathconf01 pathconf01 |
| # Basic test for pathconf(2) |
| pause01 pause01 |
| # Basic test for pause(2) |
| read01 read01 |
| # Basic test for read(2) |
| readdir01 readdir01 |
| # write multiple files and try to find them with readdir |
| # TEST CASES |
| # 1.) Create n files and check that readdir() finds n files |
| readlink01 readlink01 |
| # Basic test for readlink(2) |
| rename02 rename02 |
| # Basic test for rename(2) |
| sbrk01 sbrk01 |
| # Basic test for sbrk(2) |
| select01 select01 |
| # select to a file |
| # TEST CASES |
| # 1.) select(2) to a fd of regular file with no I/O and small timeout |
| select02 select02 |
| # select of system pipe fds |
| select03 select03 |
| select04 select04 |
| # select of fd of a named-pipe (FIFO) |
| setgid01 setgid01 |
| # Basic test for setgid(2) |
| setpgid01 setpgid01 |
| # Basic test for setpgid(2) |
| setpgrp01 setpgrp01 |
| # Basic test for setpgrp(2) |
| setregid01 setregid01 |
| # Basic test for setregid(2) |
| setreuid01 setreuid01 |
| # Basic test for setreuid(2) |
| setuid01 setuid01 |
| # Basic test for setuid(2) |
| sighold02 sighold02 |
| # Holding all signals |
| signal03 signal03 |
| # Boundary value and other invalid value checking of signal setup |
| # and signal sending. |
| sigrelse01 sigrelse01 |
| # Releasing held signals |
| statfs01 statfs01 |
| # Basic test for statfs(2) mounted filesys |
| statvfs01 statvfs01 |
| # Basic test for statvfs(2) mounted filesys |
| sync01 sync01 |
| # Basic test for sync(2) |
| time01 time01 |
| # Basic test for time(2) |
| times01 times01 |
| # Basic test for times(2) |
| ulimit01 ulimit01 |
| # Basic test for ulimit(2) |
| umask01 umask01 |
| # Basic test for umask(2) |
| uname01 uname01 |
| # Basic test for uname(2) |
| unlink05 unlink05 |
| # Basic test for unlink(2) |
| unlink07 unlink07 |
| # unlink(2) negative testcases |
| unlink08 unlink08 |
| # unlink(2) negative testcases |
| wait02 wait02 |
| # Basic test for wait(2) |
| write01 write01 |
| # Basic test for write(2) |
| symlink01 symlink01 |
| # Make a Symbolic Link to a File |
| # TEST CASES |
| # 1. Create symbolic link with abnormal object name path |
| # 2. Create symbolic link with normal object name path |
| # 3. Create symbolic link with path to an existing object file |
| # 4. Receive EEXIST error when creating an already existing symbolic link file. |
| # 5. Receive ENAMETOOLONG error when creating symbolic link which exceeds PATH_MAX in length |
| symlink02 symlink02 |
| # Basic test for symlink(2) |
| readlink01A symlink01 -T readlink01 |
| # Reads Value of a Symbolic Link |
| # TEST CASES |
| # 1. Read a symbolic link file which points at no object file |
| # 2. Read a symbolic link file which points at an object file |
| # 3. Receive ENAMETOOLONG error when reading symbolic link which exceeds PATH_MAX in length |
| # 4. Receive an EINVAL error when reading a file which is not a symbolic |
| # link file. |
| stat04 symlink01 -T stat04 |
| # Gets File Status Indirectly From a Symbolic Link File |
| # TEST CASES |
| # 1. Get object file status through symbolic link file |
| # 2. Receive ENOENT error when accessing non-existent object file through symbolic link file |
| # 3. Receive ELOOP error when nesting of symbolic links exceed maximum |
| lstat01A symlink01 -T lstat01 |
| # Get file Status About a Symbolic Link File |
| # TEST CASES |
| # 1. Get symbolic link file status when pointing at no object file |
| # 2. Get symbolic link file status when pointing at an object file |
| # 3. Get object file status when argument is not a symbolic link |
| # file. |
| mkdir05A symlink01 -T mkdir05 |
| # Fail When Making a Directory File Indirectly From a Symbolic Link File |
| # TEST CASES |
| # 1. Receive EEXIST error when creating a directory through a symbolic link file |
| rmdir03A symlink01 -T rmdir03 |
| # Fail When Removing a Directory File Indirectly From a Symbolic Link File |
| # TEST CASES |
| # 1. Receive ENOTDIR error when removing an existing directory through a symbolic link file |
| chdir01A symlink01 -T chdir01 |
| # Changes Current Working DIrectory Location Indirectly From a Symbolic Link File |
| # TEST CASES |
| # 1. Change current working directory through a symbolic link file |
| # 2. Receive ENOENT error when accessing non-existent directory through symbolic link file |
| # 3. Receive ELOOP error when nesting of symbolic links exceed maximum |
| link01 symlink01 -T link01 |
| # Creates a Link To a File Indirectly From a Symbolic Link File |
| # TEST CASES |
| # 1. Link an object file to a new file through symbolic link file |
| # 2. Receive ENOENT error when accessing non-existent object file through symbolic link file |
| # 3. Receive ELOOP error when nesting of symbolic links exceed maximum |
| unlink01 symlink01 -T unlink01 |
| # Removes a Link To a File And Not Any Object File Which Maybe Pointed At |
| # TEST CASES |
| # 1. Delete a symbolic link file and not the object file which it points at |
| chmod01A symlink01 -T chmod01 |
| # Change Object File Permissions Indirectly From a Symbolic Link File |
| # TEST CASES |
| # 1. Change file permissions of object file through a symbolic link file |
| # 2. Receive ENOENT error when accessing non-existent directory through symbolic link file |
| # 3. Receive ELOOP error when nesting of symbolic links exceed maximum |
| utime01A symlink01 -T utime01 |
| # Set File Access And Modify Object File Times Indirectly From a Symbolic Link File |
| # TEST CASES |
| # 1. Change inode times of object file through a symbolic link file |
| # 2. Receive ENOENT error when accessing non-existent directory through symbolic link file |
| # 3. Receive ELOOP error when nesting of symbolic links exceed maximum |
| rename01A symlink01 -T rename01 |
| # Rename a Symbolic Link File And Not Any Object File |
| # TEST CASES |
| # 1. Rename a symbolic link file which points at no object file |
| # 2. Rename a symbolic link file which points at an object file without any object file alterations. |
| # 3. Receive EXDEV when trying to rename a symbolic link file to an address outside of current file system |
| open01A symlink01 -T open01 |
| # Create/Open a File For Reading Or Writing Indirectly From a Symbolic Link File |
| # TEST CASES |
| # 1. Create an object file through a symbolic link file |
| # 2. Open an object file through a symbolic link file |
| # 3. Receive EEXIST error when exclusively creating an object file through a symbolic link file |
| # 4. Receive ENOENT error when accessing non-existent object file through symbolic link file |
| # 5. Receive ELOOP error when nesting of symbolic links exceed maximum |
| |