Log - 7dd48f3ef716443c6379b1531c069b99b3da7857 - platform/external/ltp

27efa4c I've attached some patches that I created for LTP at work. Most of them simply add command-line options to specify the amount of memory/pages to use for tests. However, there's one fix that works around a bug in uClibc's pthread implementation.Don't place an upper limit on the amount of time a nanosleep(2) call should take. The nanosleep(2) call will suspend execution for _at least_ the specified time, no upper limit is guaranteed. Matt Fleming <mjf@gentoo.org>. by subrata_modak · 16 years ago
b6ecbe3 I've attached some patches that I created for LTP at work. Most of them simply add command-line options to specify the amount of memory/pages to use for tests. However, there's one fix that works around a bug in uClibc's pthread implementation. Allow the number of pages to use for the test to be specified on the command-line. Fix a memory leak. Also, call _exit(2) from child processes which avoids the child calling the atexit functions that the pthread library setup. This fixes an issue where the pthread manager thread would begin exiting at the same time as a child thread. The child thread would run the atexit functions which cause it to wait for a signal to be sent from the thread manager. As the thread manager was trying to exit that signal would never be sent. Calling _exit(2) from the child avoids this whole mess.Matt Fleming <mjf@gentoo.org>. by subrata_modak · 16 years ago
7e61536 I've attached some patches that I created for LTP at work. Most of them simply add command-line options to specify the amount of memory/pages to use for tests. However, there's one fix that works around a bug in uClibc's pthread implementation. It can be unsafe to call exit(3) from a signal handler. Call _exit(2) instead. by subrata_modak · 16 years ago
be923e8 I've attached some patches that I created for LTP at work. Most of them simply add command-line options to specify the amount of memory/pages to use for tests. However, there's one fix that works around a bug in uClibc's pthread implementation. Allow the amount of memory to be used to be passed as a command-line argument. Matt Fleming <mjf@gentoo.org>. by subrata_modak · 16 years ago
d040d03 Fixes the following issues: by subrata_modak · 16 years ago
d371282 TEST_RETURN should not be inverted when logging. Signed-off-by: Masatake YAMATO <yamato@redhat.com>. by subrata_modak · 16 years ago
666a2ec Fix a bug in the selinux testsuite makefile, pointed out by David Howells. Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>. by subrata_modak · 16 years ago
c5e3223 Every once in a while, pselect01 fails with the following output: by subrata_modak · 16 years ago
f91d8ad I've tried LTP and found some wrong mode at creating file/dir in LTP source files. Here is a patch. Junjiro Okajima<hooanon05@yahoo.co.jp>. by subrata_modak · 16 years ago
7ff94df Changes for JUNE 2008 by subrata_modak · 16 years ago
20fff63 Fixing the run on supported kernels. by subrata_modak · 16 years ago
8e1b00f Changes to fix Build, Install and run on non-supported architectures. by subrata_modak · 16 years ago
23ddcbc Few Changes to ttype value. by subrata_modak · 16 years ago
5121ac4 I forget everytime to give execute permissions to the Shell scripts. Odd way of providing permission :-) by subrata_modak · 16 years ago
185f9ea I am proposing with the joined patch to allow the suite to be able the run the previous rpc tests (called now basic_tests). It needs to resolve some issues in the new "tirpc part" before allowing the suite to launch it again. Le Rouzic <aime.le-rouzic@bull.net>. by subrata_modak · 16 years ago
e17b51c hackbench tests the Linux scheduler. Initial test was written by Rusty Russell <rusty@rustcorp.com.au>. Later modified by Pierre Peiffer <pierre.peiffer@bull.net>, Ingo Molnar <mingo@elte.hu>, Arjan van de Ven <arjan@infradead.org>, "Zhang, Yanmin" <yanmin_zhang@linux.intel.com>, Nathan Lynch <ntl@pobox.com> and others. Included in LTP by Subrata Modak<subrata@linux.vnet.ibm.com>, after Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>. by subrata_modak · 16 years ago
feb4541 I'd like to use the mechanism you introduced in io_* testcases. So I've made 'io_cancel' string in the script and Makefile a variable to avoid mistake. I made the patch from testcases/kernel/syscalls/io_cancel/Makefile, not from ltp/testcases/kernel/syscalls/io_cancel/Makefile. Is this acceptable. CVS reports like testcases/kernel/syscalls/io_cancel/Makefile. Signed-off-by: Masatake YAMATO <yamato@redhat.com>. by subrata_modak · 16 years ago
06e466f This was ported from the Crackerjack Project by Masatake YAMATO <yamato@redhat.com>. by subrata_modak · 16 years ago
939b23a Here it is. Based on my last patch. by subrata_modak · 16 years ago
bb20e79 Will be adding connectors in Future here. by subrata_modak · 16 years ago
49dcfa0 Addition of Initial set of Process Event Connectors by Li Zefan. Process event connector is a netlink connector that reports process events to userspace, and currently we have 5 kinds of process events, i.e. fork, exit, exec, uid, gid. There are total 5 test cases to test its functionality. But the test is not run by default, because I don't find a way to decide whether the underlying kernel supports this feather or not. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>. by subrata_modak · 16 years ago
5a69089 Attached a new patch just to add the same fixes I provided you for icpm and tcp network stress as well. On SH4 STB with STLinux distribution we are able to run all the network stress tests without any failures. Due to configuration issues we do not run the multi-diffnic tests (because they require plural Network cards for host). It modifies the command sent to the remote host to kill tcp/icmp clients. It also deletes the address before setting it to avoid the following error: "RTNETLINK answers: File exists". This implies that the test fails. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>. by subrata_modak · 16 years ago
7bbff8c This modifies the command sent to the remote host just to kill the ns-udpclient script. Indeed, it seems that the previous string always returns 1. Moreover, it adds a new check to verify if the return value is not empty. It could happen, for example, if the RSH returns sometime the following error: poll: protocol failure in circuit setup. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>. by subrata_modak · 16 years ago
36b8a4d Running the UDP network stress tests on my SH4 target I have had to modify the following scripts: killall_udp_traffic and udp4-multi-diffip01. It deletes the address before setting it to avoid the following error: RTNETLINK answers: File exists; it implies that the test fails. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>. by subrata_modak · 16 years ago
2e4cc0b Fixed the way how to run the "tc" command on the remote machine. Otherwise, we always get the following message on the local side: The remote host does not have netem functionality. Signed-off-by: Giuseppe Cavallaro@st.com. by subrata_modak · 16 years ago
482deaf Addition of enhanced test plan by Cai Qian <qcai@redhat.com>. by subrata_modak · 16 years ago
26dc572 The attached patch was necessary in order to get LTP to build for our embedded system at work. Without this patch testcases that use the my_getpwnam() library function suffer from redeclaration errors. Signed-off-by: Matt Fleming <mjf@gentoo.org>. by subrata_modak · 16 years ago
47471f7 This patch fix a concurrency issue in semctl06. The IPC keys used for this test could conflict with keys from another task. Signed-off-by: Matthieu Fertré <mfertre@irisa.fr>. by subrata_modak · 16 years ago
0e1f085 I found wrong format string usage in ltp/testcases/kernel/syscalls/exit/exit02.c: returned value from strerror is not used. Signed-off-by: Masatake YAMATO <yamato@redhat.com>. by subrata_modak · 16 years ago
cd6dc3f I've ported a testcase for gettid() from crackerjack to ltp. I've added a directory ltp/testcases/kernel/syscalls/gettid. Signed-off-by: Masatake YAMATO <yamato@redhat.com> by subrata_modak · 16 years ago
b23f123 Updating to include info about all other LTP man pages. Subrata Modak <subrata@linux.vnet.ibm.com> by subrata_modak · 16 years ago
37fabcf signal_test_05 failed on ia64 and x86_64, the following message outputed: by subrata_modak · 16 years ago
0d165eb signal_test_01 failed on ia64, the following message outputed: by subrata_modak · 16 years ago
454dad4 we have some truble with mapping api functions (such as tst_exit) in bash (./tools/apicmds/ltpapicmd.c). Now this problem may be fixed if added "exit" after tst_exit, but it's temporary. We should redesign this system and describe it in documentation. Andrew Vaggin <avagin@parallels.com>. by subrata_modak · 16 years ago
f6e1b03 Looks like the else is missing since in both the cases where flag is set to one or not we get the test broken print. Signed-off-by: Max Stirling <vickyirobot@gmail.com>. by subrata_modak · 16 years ago
a5765f2 This patch ensures that async_handler and async_handler_jk runs by default. Also the profile/default is updated to reflect the same. Signed-Off-By: Chirag <chirag@linux.vnet.ibm.com>. by subrata_modak · 16 years ago
95d95b4 Included the statement: by subrata_modak · 16 years ago
abecc21 Fix a bug in the sigiotask test and enable the test_fdreceive policy to build against the latest refpolicy headers. Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>. by subrata_modak · 16 years ago
dd5adf0 Force the catch_sighup to be volatile in order to overcome an issue due to the compiler optimization. In fact, compiling the test with -Os the catch_sighup variable is not set to 1 into the signal handler. At runtime, the test remain in a loop. No problem compiling without Os or O2. by subrata_modak · 16 years ago
a42718a In the manpage for tst_res(3) in the April snapshot it says... by subrata_modak · 16 years ago
c310e56 Reverting back the changes done to fcntl-lock tests in May 2008 release, as this would have canceled the operation Revision *1.1 *done on the /Mon Sep 11 20:40:52 2006 UTC/ by /mreed10 /which added "A patch that added new functionality into the NFSvf lock tests. by subrata_modak · 16 years ago
0417704 mallocstress stresses the VMM and C library by spawning N threads which malloc blocks of increasing size until malloc returns NULL. It occur because test doesn't wait for all thread started. already started threads begin allocate memory, so pthread_create can return ENOMEM. my patch added this synchronizing. I use semaphore, because it can wait-for-zero unlike pthread_mutex. sorry, forgot set permission in semget, new patch attached. Andrew Vagin <avagin@gmail.com>. by subrata_modak · 16 years ago
c064135 This patch fixes the writetest.c to return proper status on Failure/Success. At present the return code of the writest.c is 'zero' for both Success and Failure. As per norms non-zero value should be returned for error , so fixing this testcase. Signed off : Veerendra C <vechandr@in.ibm.com>. by subrata_modak · 16 years ago
44bbe6b I execute fork12 test and OMM killer begin send SIGKILL to its children and fork return success always. fork12 hang up in this case, so I create the patch (see attach), which check whether someone child killed and if it occur, return number of forked processes. Andrew Vagin <avagin@gmail.com>. by subrata_modak · 16 years ago
0528188 On ia64, __clone2() is used instead of clone(). Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>. by subrata_modak · 16 years ago
2743968 utimensat() syscall was introduced from linux-2.6.22 onwards. Michael wrote the initial testcases, and, the same is being contributed to LTP under GPLv2. I worked out a patch for this. Though this is not using LTP specific libraries at the moment. But the tests run well and tests 99 separate variations. Michael has written it through itś length and breadth. I generated the code coverage (9.2%) over 2.6.25-gcov kernel, which however was not built with <make allmodconfig> option. Please see it attached along with a draft man page of utimensat(), created by Michael. Let us know how do you feel about this test. We can then go ahead and add this to LTP. Signed-off-by Michael Kerrisk <mtk.manpages@googlemail.com>. Signed-off-by: Subrata Modak <subrata@linux.vnet.ibm.com>. by subrata_modak · 16 years ago
2c82e33 It looks like the only thing that didn't apply was the function declaration. It builds (with a warning) and runs just fine. But here is a patch to fix the warning. Signed-off-by: Vernon Mauery <vernux@us.ibm.com>. by subrata_modak · 16 years ago
a649d52 Currently, timerfd01 test case blocks building process for architectures that haven’t prepared for it. This patch modify it to be more generic for all architectures. Roy Lee <roylee@andestech.com>. by subrata_modak · 16 years ago
b230c64 Add syscall numbers for timerfd syscalls under i386 and x86_64. Roy Lee <roylee@andestech.com>. by subrata_modak · 16 years ago
75164c3 This patch fix the make file of fs_bin test case so that it can be cross-built. Roy Lee <roylee@andestech.com>. by subrata_modak · 16 years ago
e909dfc time-schedule01 failed, because it sent SIGTERM to itself before program exited, so the return value is not 0. This patch makes the main process ignore SIGTERM. Li Zefan <lizf@cn.fujitsu.com>. by subrata_modak · 16 years ago
39fe977 After the patch from Roy moveing the libtestsuite code from /testcases/kernel/syscalls/lib to /lib, the code in the old directory has not been removed. Moreover, include PATH in some makefile was still pointing to this old directory. This patch remove libtestsuite code from the old directory and remove deprecated references to this old dir in some Makefiles. Renaud Lottiaux <Renaud.Lottiaux@kerlabs.com>. by subrata_modak · 16 years ago
0700e4e This patch fixes a compilation warning due to the function "sync_pipe_close" which was not exported. Renaud Lottiaux <Renaud.Lottiaux@kerlabs.com>. by subrata_modak · 16 years ago
44fc4c1 This patch fix an issue in the sync_pipe implementation. The problem is the following : after the creation of a pipe we do not close any file descriptor until the end of a test. Let's imagine the following execution : by subrata_modak · 16 years ago
a4b89a8 The following patches fix execve05 for error reporting when execve() succeeds, and exit synchronization in loaded systems. The last two patches are minor cleanups. cleanup() is reserved for the main test process. In children, call exit() instead. Signed-off-by: Louis Rilling <Louis.Rilling@kerlabs.com>. by subrata_modak · 16 years ago
7432850 The following patches fix execve05 for error reporting when execve() succeeds, and exit synchronization in loaded systems. The last two patches are minor cleanups. In a child, calling waitpid() to wait for the death of sibling child is simply non-sense. Moreover in execve05, the second child does not need such synchronization. Remove it. Signed-off-by: Louis Rilling <Louis.Rilling@kerlabs.com>. by subrata_modak · 16 years ago
dfe328c The following patches fix execve05 for error reporting when execve() succeeds, and exit synchronization in loaded systems. The last two patches are minor cleanups. In execve05, the first child must keep a file open at least until the second child tries to execve() this file. However the test achieves this with a sleep of 10s, which may fail on loaded systems. This patch replaces this (arbitrary) sleep with a pipe-based synchronization, where the parent notifies the first child once the second child has terminated. Signed-off-by: Louis Rilling <Louis.Rilling@kerlabs.com>. by subrata_modak · 16 years ago
ed56540 The following patches fix execve05 for error reporting when execve() succeeds, and exit synchronization in loaded systems. The last two patches are minor cleanups. execve05 checks that execve() fails if a process has opened the file with write access. However, in case the test fails and execve() succeeds, the default binary (test3) has return code 0, which is interpreted as test success. We get output like that: by subrata_modak · 16 years ago
021ed25 I spent some time looking at the sched_latency test trying to see why it took so long to start the thread. The java version of the test takes a comparable amount of time to start the thread as it does for each period. The rt-test version was taking an order of magnitude longer. After digging through the java documentation, I found that the RealtimeThread does not actually start executing until the RealtimeThread.waitForNextPeriod() fulfills the time specified in the PeriodicParameters parameter included in its constructor. So all the tests are scheduled to run about 1 second after the threads are created. This gives the system plenty of time to create the thread (a non-realtime code path), set the scheduling parameters and then sleep until the specified run time. The start latency as measured by the test goes something like this: by subrata_modak · 16 years ago
4464067 This patch fix a concurrency issue in mremap04. The tmp directory the IPC key was build with was destroyed before we destroy the IPC ressource attached to the key. In case of concurency, the same inode id can be reused for another process tmp dir, leading to the generation of the same key. Renaud Lottiaux <Renaud.Lottiaux@kerlabs.com>. by subrata_modak · 16 years ago
50512d9 CPU and MEMORY HOTPLUG test cases picked up from http://devresources.linux-foundation.org/dev/hotplug/. by subrata_modak · 16 years ago
af2c9ef These tests were contributed by the timerfd() syscall developer Davide Libenzi <davidel@xmailserver.org>. by subrata_modak · 16 years ago
6a860fc Changes for MAY 2008 by subrata_modak · 16 years ago
3deda4b This patch addresses the review comments for recently accepted memory controller testcases (failcnt test and stat_check test). Signed-off-by: Sudhir Kumar <skumar@linux.vnet.ibm.com>. by subrata_modak · 16 years ago
d04fedf Ankita Proposed that: by subrata_modak · 16 years ago
af16e52 According to man sigpause : by subrata_modak · 16 years ago
091b5e0 This patch adds the documentation for memory controller. Signed-off-by: Sudhir Kumar <skumar@linux.vnet.ibm.com>. by subrata_modak · 16 years ago
9e65c8b This patch adds the stat check test case for memory controller. In this test a task runs in a group with some memory limit and does some memory allocation. The script checks the memory usage field from two files under the controller, the memory.usage_in_bytes and memory.stat. It reports pass if the two values are same and fail if the two values differ. Signed-off-by: Sudhir Kumar <skumar@linux.vnet.ibm.com>. Acked-by: Dhaval Giani <dhaval@linux.vnet.ibm.com>. by subrata_modak · 16 years ago
5c7971b This patch adds the failcnt check test for memory controller. In this test a task runs in a group with some memory limit and does total memory allocation greater than the limit of the group. The script checks the failcnt from memory.failcnt file under the controller. It reports pass if failcnt increases otherwise reports fail. Signed-off-by: Sudhir Kumar <skumar@linux.vnet.ibm.com>. Acked-by: Dhaval Giani <dhaval@linux.vnet.ibm.com>. by subrata_modak · 16 years ago
2f4de1d This patch fixes the output of the test, so all fatal errors to cause the final failure of the test will be printed out as FAIL instead of INFO, and all verbose and debug output will be moved to STDERR instead of STDOUT for easy output processing. Signed-off-by: Cai Qian <qcai@redhat.com>. by subrata_modak · 16 years ago
8a9ecb7 This patch adds a list for all known issues which are probably subtle to be fixed in kernel to the test, so the test could continue. Also, it will print out those expected failures as INFO or WARN to the test result. Signed-off-by: Cai Qian <qcai@redhat.com>. by subrata_modak · 16 years ago
aad9c3b Adding this part of default LTP run. Subrata Modak <subrata@linux.vnet.ibm.com>. by subrata_modak · 16 years ago
1d1d22b Restored back the Makefile content. Else, there will be build/clean/install failures. Subrata Modak <subrata@linux.vnet.ibm.com>. by subrata_modak · 16 years ago
8f2ef4a Manas K Nayak <maknayak@in.ibm.com> updated the fnctl lock tests from http://nfsv4.bullopensource.org/tools/tests/locktest.php. I have retained some info like the deploy_info, etc from the older release as well. The old tests were failing. After updates, the test passes. by subrata_modak · 16 years ago
69bc3dc I got the following failure: by subrata_modak · 16 years ago
6f71555 Profiled tests - cleanup. I forgot some useless code in the scripts. These patches do the cleanup. Signed-off-by: Gilles Carry <gilles.carry@bull.net>. by subrata_modak · 16 years ago
e272235 execve02 checks that execve() fails if the caller does not have executable permission on the file. However, in case the test fails and execve() succeeds, the default binary (test3) has return code 0, which is interpreted as test success. We get output like that: by subrata_modak · 16 years ago
7a2fd9b I got failures on ptrace03 because the latest kernel allows init process to be traced. The commit is: by subrata_modak · 16 years ago
cced845 This patch fix a concurrency issue in msgctl06. The tmp directory the IPC key was build with was destroyed before we destroy the IPC ressource attached to the key. In case of concurency, the same inode id can be reused for another process tmp dir, leading to the generation of the same key. Regards Renaud Lottiaux <Renaud.Lottiaux@kerlabs.com>. by subrata_modak · 16 years ago
1ffddf0 Profiled Tests: by subrata_modak · 16 years ago
729d771 Preparing for the next Stable release of ltp-devel Packages, which will have: by subrata_modak · 16 years ago
b968452 Included all of /include and /lib and /doc in the ltp-devel RPMs. By George Kraft <gk4@us.ibm.com>. by subrata_modak · 16 years ago
bbbbf47 Currently ltp-devel install man pages in /opt/ltp/share/man/; however, they should be installed in /usr/share/man/. By, George Kraft <gk4@us.ibm.com>. by subrata_modak · 16 years ago
0de2c12 The earlier patch broke parisc (which has really some strange requirements). Attached patch fixes it. If it's OK for you, please apply. By, Helge Deller <deller@gmx.de>. by subrata_modak · 16 years ago
9a0748e Put-libtestsuite-to-a-more-common-place.patch by subrata_modak · 16 years ago
8791f67 Make-sync_pipe-API-more-generic-and-update-related.patch. by subrata_modak · 16 years ago
1cad5c0 The "pan/pan" would failed in segmentation fault with a wrong option "-f command-file". Among the options, the "/tmp/test" does not exist. The solution is to add condition judgements before use the pointer. To execute pan/pan with option "-p" will occurs Segmentation fault. The reason is that it not appends the "-l" option to pan to open the "logfile" for writing log. Just add a condition judgement to fix it. Signed-off-by: Jin Bing Guo <guojb@cn.ibm.com>. by subrata_modak · 16 years ago
5c7ad45 Both of the above test cases has similar issue to shmt/mmap series. This patch removes the non-aligned addresses explicitly coded for different architectures by: by subrata_modak · 16 years ago
4393821 Adding default Log File generation support for LTP. By, Subrata Modak<subrata@linux.vnet.ibm.com> by subrata_modak · 16 years ago
ee2924a Roy Lee <roylee17@gmail.com> wrote: by subrata_modak · 16 years ago
3b8e06c I see Roy's patch was already checked in. In principle I agree with the patch, but a few things are wrong now and IMHO does not fulfill what it should test any longer. shm05.c -> see my (untested!!!) patch below. Some architectures can only map at specific offsets. Current version "sucessfully" fails, because e.g. hppa can't map at cp+4096. So, it's not failing because the memory regions overlap, although that was intended to be tested...shm06.c now does basically the same test as shm04.c ?!? Doesn't make sense... I would revert the patch for shm06, but maybe others think different???? Other patches seem ok, although I haven't looked too deep into them yet... Helge Deller <deller@gmx.de>. by subrata_modak · 16 years ago
3bfea97 These patches will allow for the plotting of the max over time in discrete segments, rather than as a monotonically increasing value, while maintaining the original behavior by default. The existing test has an infinite window and report the new max each time it is increased. The patch maintains the default behavior and adds a -w option, allowing the user to specify a window (iteration count) for which the max of that window is reported ever w iterations. Signed-off-by: Darren Hart <dvhltc@us.ibm.com>. Acked-by: John Stultz <johnstul@us.ibm.com>. by subrata_modak · 16 years ago
ba9a5b9 These patches will allow for the plotting of the max over time in discrete segments, rather than as a monotonically increasing value, while maintaining the original behavior by default. Cleanup some whitespace issues here. Signed-off-by: Darren Hart <dvhltc@us.ibm.com>. Acked-by: John Stultz <johnstul@us.ibm.com>. by subrata_modak · 16 years ago
78b1912 This patch modifies testcases to attach their shm segment to addresses chosen by ststem instead of arch-dependent ones. I looked into the history of these testcases, but couldn't find the reason why they specified arch-dependent addresses in the first place. If it has something to do with the page coloring issue, SHMLBA should be in some manners instead of defining arch-dependent addresses. Tested successfully on ia64, ppc64, x86_64, s390x & i386 by Subrata Modak <subrata@linux.vnet.ibm.com>, and by Martin Habets <errandir_news@mph.eclipse.co.uk> on sparc32. Signed-off-by: Roy Lee <roylee17@gmail.com>. by subrata_modak · 16 years ago
f665c2b The fixed address passed to mmap() should be aligned to the value of SHMLBA as defined in sys/shm.h (The same fix can be found in the mmap01 case earlier sent from Martin Habets ). By, Roy Lee <roylee17@gmail.com>. by subrata_modak · 16 years ago
1d1937a This patch adds a few tests for a variety of bind mounts. More than just shared subtrees are involved as plain --bind and plain --move are used. Read-only bind mounts are not covered by these tests however. Avantika Mathur originally wrote the tests. I've ported them to use LTP APIs and conventions. I've also modified Avantika's scripts to try and robustly cleanup after broken tests so that leftover mounts and failures at any point in a test are cleaned up thoroughly. I've made what efforts I can to follow the conventions I found in LTP FAQs and the source however there's alot here so I may have missed something. Shared bind mounts were introduced in 2.6.15. Because of this we need a tst_kvercmp command which can be invoked from a script. I've added this to ltpapicmd.c. This patch applies to the April release of LTP. I'll also be posting results for x86, x86_64, and ppc64 on a variety of kernels. In order to highlight the results contributed by this patch I've only run this portion of the patched LTP. Comments welcome. Signed-off-by: Matt Helsley <matthltc@us.ibm.com>. by subrata_modak · 16 years ago
ecedaa2 Fix for some failures by Anoop V Chakkalakkal <anoop.vijayan@in.ibm.com>. by subrata_modak · 16 years ago
45d91c4 The problem is because some of the realtime tests can't be compiled on older distros. We will have to fix this 'properly', taking into account the kernel and glibc versions, as well as the architecture. Until we do that, can we disable compiling realtime tests by default? Below is a patch that can do it. Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com> by subrata_modak · 16 years ago
b2e70c6 Attached is a fixed patch to be applied over 1.8 in cvs. Previous patch mistook the return of mknod() for a file descriptor and after the first iteration, test was using the wrong (closed) file descriptor. This patch uses the correct file descriptor. Thanks Rishikesh for catching my error. By, Henry Yei <hyei@mvista.com> by subrata_modak · 16 years ago
d2c75d0 normalize exit values as expected: 0 means PASS and non-0 means FAIL by vapier · 16 years ago