- a7f5bda Conformance/interfaces/timer_getoverrun/2-2 has failed on tests with some distros running on ppc64 machines. As far as I could realize, it happens due to these machines are running kernel with timer frequency configured to 100 Hz, which represents a clock precision smaller than the defined INTERVALNSEC. This patch sets the interval equals to the clock precision (retrieved via function clock_getres()), in order to avoid to use a interval smaller than the resolution of the clock. However, with these changes, this testcase becomes very similar to the test 2-3. Is this a valid modification? If not, any thought what should be done in this case?. Signed-off-by: Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>. by subrata_modak · 16 years ago
- 68177f9 The following patch adds two known issues seen on some versions of Kernels, and also modifies the copyright information. Signed-off-by: CAI Qian <caiqian@redhat.com>. by subrata_modak · 16 years ago
- 999fb4a When we execute `./growfiles -h` command then it gives the result as: growfiles 1 PASS : Test passed, Which is just confusing the user that some testcase has been executed, whether it just ran the help/usage command. So here is the small patch for fixing this issue. Signed-Off-By: "Rishikesh K. Rajak" <risrajak@linux.vnet.ibm.com>. by subrata_modak · 16 years ago
- 67a47da I've rearranged Makefile for setgid test case. I've put _16 related macros to compat_16.mk file. The original Makefile includes it. So when I work on more _16 test cases, I just have to do the same. I'll do the same on _64. I choose utils as its directory name. Please put attached files compat_16.mk and newer_64.mk to ltp/testcases/kernel/syscalls/utils. Signed-off-by: Masatake YAMATO <yamato@redhat.com>. by subrata_modak · 16 years ago
- 7af8ee4 move_pages() failed to compile on the following machine. Subrata Modak <subrata@linux.vnet.ibm.com>. Jin Bing Guo <guojb@cn.ibm.com> wrote: I also met this problem on ppc machine with SLES 10.2. I checked the numactl package and found the problem was due to the unmatch of the version of numa. The numa_move_pages was supported from numactl-2.0.0. See the change log of it. Vijay Kumar <vijaykumar@bravegnu.org> wrote: Hi Subrata, as pointed out by Jin Bing Guo, only recent versions of libnuma have support for move_pages(). It is necessary to check if move_pages() support is available before compiling the test cases. Check if move_pages() support is available in libnuma. Signed-off-by: Vijay Kumar <vijaykumar@bravegnu.org>. by subrata_modak · 16 years ago
- 3e9f094 inotify01 build error fix for x86_64. Signed-Off-By: Andrew Vagin <avagin@parallels.com>. by subrata_modak · 16 years ago
- 5335e9d Build Error fix. I too had prepared the same patch, but there were some more issues on a different kernel. Hence, have put more checks in the newly attached patch. Subrata, I have tested it on ppc64 and x86_64 and is working fine. Please test and let me know. Signed-Off-By: "B. N. Poornima" <poornima@in.ibm.com>, Signed-Off-By: Jin Bing Guo <guojb@cn.ibm.com>. by subrata_modak · 16 years ago
- 5a4cf27 Addition of getcpu() syscall to LTP. I have fixed the problem noticed earlier. Hope it will be fine this time. More over I wanted to mention that I have dropped getcpu2.c as it was found to be less relevant for getcpu() testing. Andi had made some suggestions to improve the test, I am submitting this before making all those changes. If possible I will sit and work on Andi's suggestion. Signed-Off-By: Sharyathi Nagesh <sharyath@in.ibm.com>. by subrata_modak · 16 years ago
- 6f7dd76 Was just browsing through and found that this piece of code is not built/installed by default. I did not find any issue to do so. So, just added up to the Makefile(s). I am however investigating the best possible way to run them. Signed-Off-By: Subrata Modak <subrata@linux.vnet.ibm.com>. by subrata_modak · 16 years ago
- e5ccaca The LTP numa testcases were initially designed for libnuma API in version 1. Building latest LTP (intermediate 20080820) against latest version of libnuma (2.0.2) requires -DNUMA_VERSION1_COMPATIBILITY in the CFLAGS - to switch to to the compatibility interface of libnuma API version 1. There are no libnuma testcases for API version 2 in ltp yet. Currently -DNUMA_VERSION1_COMPATIBILITY will not help for the LTP numa testcase, since the compability interface is missing some interface from version 1: Fix for the VERSION1 compatibility interface got already send to linux-numa list. I hope the libnuma fix got accepted and attached can be applied to LTP soon to fix the build of the LTP numa testcases, when building against libnuma 2.0.2 or greater. Signed-off-by: Daniel Gollub <dgollub@suse.de>. by subrata_modak · 16 years ago
- 90d1e3c I am attaching a patch fs.patch for fixing some testcases failing on arm. fs.patch:- For arm architecture some system calls has been removed like time, utime etc. Since fs testcases include time system call, it should be replaced with gettimeofday system call. It wouldn't effect other architectures and thus works for arm also. Also testcases like utime should be made architecture specific. sasa sasa <sasak.1983@gmail.com>. by subrata_modak · 16 years ago
- 004f70f Integrating build/install of ...security/seclvl (BSD Secure Levels LSM) to default LTP build environment. Was just browsing through and found that this piece of code is not by subrata_modak · 16 years ago
- a5b38e4 This patch adds eventfd counter overflow test cases. I have cleaned up this patch - separated the test cases into its own functions and fixed a few typos. Please ignore the previous patch, and use this cleaned up patch. After the patch is applied, a "make clean" and a "make" should result in a clean build. It works perfectly for me. Anyways I am providing an updated patch with the other linux_syscall_numbers.h removed. As noted in my previous mail, there are two instances of the generated file in the CVS repo now, "include/linux_syscall_numbers.h" and "testcases/kernel/include/linux_syscall_numbers.h". The first is supposed to be a link to the second, and both are generated during the build process, and should be removed. The new patch removes both the files. Signed-off-by: Vijay Kumar <vijaykumar@bravegnu.org>. by subrata_modak · 16 years ago
- 585950c I've done on the other test cases. In addition, I've cleaned up Makefiles related to _64 and _16 testcases as suggested by Garrett Cooper <yanegomi@gmail.com>. Signed-off-by: Masatake YAMATO <yamato@redhat.com>. by subrata_modak · 16 years ago
- 548379d I was experimenting with using runltp along with disk stress (-D option). It does not parse the arguments properly. It only uses the last parameter in the comma separated list. With this patch it properly parses the arguments to the -D option. Signed-off-by: Doug Chapman <doug.chapman@hp.com>. by subrata_modak · 16 years ago
- cbfac50 I propose this new test setuid04 for the setuid syscall. The goal if this test is to check the fsuid is correctly handled by the setuid syscall. To do so, the test create a testfile as root with permission 0644, then do a setuid and try to open the file RDWR. This last open must fail since the process with new UID is not allowed to open the file on write. In a second step, the test does a fork to check the fsuid is correctly passed to a son and the son behaves correctly regarding files, i.e. it cannot open on write the test file. by subrata_modak · 16 years ago
- 744305e How about introducing TCID_DEFINE? I'm not sure puttint TCID_DEFINE macro to test.h. I'm not sure using a symbol as an argument for TCID_DEFINE macro is better than using a string. (I had strong lisp backgroud:-). If this acceptable, I'll update related documents and test cases I worked. Signed-off-by: Masatake YAMATO <yamato@redhat.com>. by subrata_modak · 16 years ago
- 573e348 This is a patch from John, written a few months back. I have fixed up a few cosmetic whitespace bits, and have refreshed it so it should apply cleanly to LTP today. Will Schmidt <will_schmidt@vnet.ibm.com>. by subrata_modak · 16 years ago
- 7ca4719 Changed the way by which message_queue_test_02 should be run properly. Signed-Off-By: Jin Bing Guo <guojb@cn.ibm.com>. by subrata_modak · 16 years ago
- b1ef993 Intial Addition of sync_file_range() syscall test to LTP. I have developed test cases for sync_file_range() system call which will do the basic sanity (error) checking for the system call. These tests have to be run on 2.6.17 kernel and above. The test cases have been currently tested only on x86 and x86_64 architecture. Also, I have hard coded the system call number in the test case for review purposes and will be later on moving it to linux_syscall_numbers.h file in the LTP framework. The support for PowerPC was provided from 2.6.22 kernel onwards. I had not taken care of it in my previous patch. Now this is addressed. Signed-Off-By: "B. N. Poornima" <poornima@in.ibm.com>. by subrata_modak · 16 years ago
- 2336750 In semaphore_test_01 case, it wanted to create a semaphore and printed out the semaphore ID for comparison with the output of the 'ipcs -s' command. So it didn't remove the semaphore when exited. Since the resource of semaphore is limited. It's better to write a shell script to perform the comparison and remove the semaphore. I wrote the bash script "testcases/kernel/ipc/ipc_stress/run_semaphore_test_01.sh", and patched the "Makefile" and "runtest/ipc" to run the script. Please clean the semaphore up post patching and before executing tests. Signed-Off-By: Jin Bing Guo <guojb@cn.ibm.com>. by subrata_modak · 16 years ago
- ab3acf0 When compiling hackbench.c , I got the warning message: by subrata_modak · 16 years ago
- e4fabbd In message_queue_test_05, it planned to allocate 100 message queues for stress testing. But if the system resource of message queue couldn't meet it, it would exit without deleting the allocated message queues. In addition, other test cases couldn't allocate a new message queue any more. This patch addresses this by: by subrata_modak · 16 years ago
- 88dc0db Now this script returns proper exit code , in the event of failure/success. I have verified this. Signed-Off-By: Veerendra <veeren@linux.vnet.ibm.com>. by subrata_modak · 16 years ago
- bda48ea In hugemmap04, the huge page size was defined as a macro-definition. by subrata_modak · 16 years ago
- 1e9bad9 In hugemmap01, huge page size was defined as a macro-definition. by subrata_modak · 16 years ago
- 1382fd1 Addition of get_robust_list() & set_robust_list() syscalls. Signed-Off-By: Ramon de Carvalho Valle <rcvalle@linux.vnet.ibm.com>. by subrata_modak · 16 years ago
- d5073b9 Here is the RO Bind mount updated testcase. This script consists of 3 files. by subrata_modak · 16 years ago
- 66b8447 Added basic testcases for eventfd() syscall. Signed-off-by: Vijay Kumar <vijaykumar@bravegnu.org>. by subrata_modak · 16 years ago
- bbc5be6 Addition of truncate64 syscall test support. Signed-off-by: Masatake YAMATO <yamato@redhat.com>. by subrata_modak · 16 years ago
- 4dd9bbe Addition of ftruncate64 syscall test support. Signed-off-by: Masatake YAMATO <yamato@redhat.com>. by subrata_modak · 16 years ago
- 592f957 utimensat01 give a build error when __NR_utimensat is not set because test.h is not included. It also gives a link error because TCID is not defined. This patch fixes these issues. Signed-off-by: Martin Habets <errandir_news@mph.eclipse.co.uk>. by subrata_modak · 16 years ago
- 896d025 It is surely better to support the old blockio.bandwidth and the new blockio.bandwidth-max interface for now. So, just ignore the previous patch. Support both blockio.bandwidth and the new interface blockio.bandwidth-max, to set i/o limiting rules according to the new userspace->kernel interface (io-throttle v8). In perspective we would like to have also blockio.bandwidth-min and implement a mechanism to guarantee minimum performance levels as well. Signed-off-by: Andrea Righi <righi.andrea@gmail.com>. by subrata_modak · 16 years ago
- 39c3be5 As reported by Li Zefan, normally upper-case macros means constants, but the above macros are not constants: Use lower-case names instead. Signed-off-by: Andrea Righi <righi.andrea@gmail.com>. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>. by subrata_modak · 16 years ago
- da53b08 Addition of setgid16 syscall tests. I've tried this task. Please put compat_16.h to testcases/kernel/syscalls/setgid. And apply following patch before rebuilding tests. In addition I removed one getgid() invocation in testcases/kernel/syscalls/setgid/setgid02.c because the returned value is not used anywhere in the program. Signed-off-by: Masatake YAMATO <yamato@redhat.com>. by subrata_modak · 16 years ago
- 5c7c201 This patch fixes the fs_inod script. On error-condition it was not setting up proper error values and used to throw up error. Also, it was referring to a non-existent function 'error()'. Now it returns 0 on Success or non-zero value on Failure. I have verified this script on ReadWrite dir and ReadOnly-dir where the tests fail. Signed-Off-By: Veerendra Chandrappa <vechandr@in.ibm.com>. by subrata_modak · 16 years ago
- 60aa783 Compile error message occured on ia64 box. You should get a gcc warning on x86: "PAGE_SIZE" redefined. We can avoid the warning: by subrata_modak · 16 years ago
- d9e4d40 Changes for JULY 2008 by subrata_modak · 16 years ago
- 2301d1f The new patch addresses the other error conditions. Like if its not able to create any dir/files in a ReadOnly dir. Also this patch returns the proper return code on success/failure . I have tested this script on ReadWrite dir and ReadOnly dir. Veerendra Chandrappa <vechandr@in.ibm.com>. by subrata_modak · 16 years ago
- 497f269 Update to OpenHPI 2.12.0 (see www.openhpi.org for more info) by subrata_modak · 16 years ago
- 8dfa1b3 Addition of move_pages() syscall tests. The updated patch fixes the warning messages and removes the print_bitmask function (it's not used) which causes build errors on powerpc. Signed-off-by: Vijay Kumar B. <vijaykumar@bravegnu.org>. by subrata_modak · 16 years ago
- 78bdcd1 Update to OpenHPI 2.12.0 (see www.openhpi.org for more info) by subrata_modak · 16 years ago
- 3358671 In tsc_minus, changed test (tsc_begin < tsc_end) by (tsc_begin <= tsc_end) since values can be equal as read operations are sometimes very close. Signed-off-by: Gilles Carry <gilles.carry@bull.net>. Cc: Tim Chavez <tinytim@us.ibm.com>. Acked-by: Darren Hart <dvhltc@us.ibm.com>. by subrata_modak · 16 years ago
- 49309b9 This macro reads atomically the 64-bit TSC register. Reading the 64-bit register using two 32-bit instructions sometimes causes wrapping when a clock update appears in between. A single 64-bit read fixes this. Signed-off-by: Gilles Carry <gilles.carry@bull.net>. Cc: Tim Chavez <tinytim@us.ibm.com>. by subrata_modak · 16 years ago
- 75d0486 First patch regroups TSC functions and macros definition into librttest. Second patch is to have an atomic reading of the 64-bit timebase register of powerpc64. This new function is only valid if -m64 is used when compiling the whole testcase suite with a powerpc64. Thirs patch is a fix to avoid spurious tsc_minus warning. These patches been tested on a ppc64 machine either with 32 or 64 bit binaries. (-m64). by subrata_modak · 16 years ago
- b6438db When compiling powerpc binaries, gcc defaults to 32 bit. To do some tests I needed to have a 64 bit binary. Since I'm using realtime, I modified config.mk as below. My questions: is there any official way to turn LTP in 64bit? If not, what shall we do then? Should LTP default to 32 or native-arch bit? Shall we use something like: "if (uname -m) ..." or use a command line option? Any comment? by subrata_modak · 16 years ago
- d742a43 It replaces nested arithmetic operations following example from Open Group specifications, in order to avoid issues with different shells, like dash from Ubuntu Gutsy. Signed-off-by: Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>. by subrata_modak · 16 years ago
- f4d2c1e In fact, the case "hackbench02 hackbench 150 thread 1000" failed when i tested the latest ltp. the following error message occured: by subrata_modak · 16 years ago
- 83d727e I get compile error in hackbench. With the following patch, the compiler error is gone. Signed-off-by: Masatake YAMATO <yamato@redhat.com>. by subrata_modak · 16 years ago
- e32e669 I found some typos. I cannot remember but maybe I introduced. Signed-off-by: Masatake YAMATO<yamato@redhat.com>. by subrata_modak · 16 years ago
- 18dc0c2 Sorry, I took mistake in giving value to TST_* in io_setup01.c and io_submit01.c. Signed-off-by: Masatake YAMATO <yamato@redhat.com>. by subrata_modak · 16 years ago
- 317251d The following problem i found: by subrata_modak · 16 years ago
- 1026f0c The attached patch fixes the following issue: The selinux-testsuite file sigiotask testcase (run as test_fileop_t) needs rw permission to terminals to proceed its execution, which is not allowed by the non refpolicies provided in the testsuite. Ramon de Carvalho Valle <rcvalle@linux.vnet.ibm.com>. by subrata_modak · 16 years ago
- 1b90e1a Add the block device I/O bandwidth controller (io-throttle) testcase. See testcase documentation for design and implementation details. See also: http://lkml.org/lkml/2008/7/4/143. Signed-off-by: Andrea Righi <righi.andrea@gmail.com>. by subrata_modak · 16 years ago
- f9e551b Error occured, when i tried to compile ltp on ia64 box. There is a patch to fix it. similar patch on i386/x86_64 has been applied. (http://marc.info/?l=ltp-list&m=121257587007213&w=2). Signed-off-by: Shi Weihua <shiwh@cn.fujitsu.com>. by subrata_modak · 16 years ago
- 967caaf According to the manpages io_submit() can return the value: EAGAIN Insufficient resources are available to queue any iocbs. We should handle this opportunely trying to re-submit the AIO request again. Maybe an even better approach could be to just sleep a bit before trying to re-submit the request. In any case this would resolve a never-ending loop in aio01.c, where io_getevents() can be continuously called without having issued any actual request if io_submit() failed with -EAGAIN. Signed-off-by: Andrea Righi <righi.andrea@gmail.com>. by subrata_modak · 16 years ago
- c5792c9 Porting of io_destroy(), io_getevents(), io_setup() & io_submit() syscall tests from Crackerjack to LTP, by Masatake YAMATO <yamato@redhat.com>. by subrata_modak · 16 years ago
- 4a4e689 It eliminates the potential for many false negatives. by subrata_modak · 16 years ago
- 3593a50 This patch uses strcpy() instead of strcat(). strcat() should only be used when the 'dest' argument is NULL terminated. In this case, path_buffer is not initialised and so may not contain a NULL character. strcpy() will do the right thing and copy the string to the beginning of path_buffer. Matt Fleming <mjf@gentoo.org>. by subrata_modak · 16 years ago
- e753fd7 There were some mistakes in my previous patch. by subrata_modak · 16 years ago
- 1522cca I've attached some patches that I created for LTP at work. Most of them simply add command-line options to specify the amount of memory/pages to use for tests. However, there's one fix that works around a bug in uClibc's pthread implementation. Check for SYS_getuid32 and SYS_getgid32, these are the versions provided by some architectures. Matt Fleming <mjf@gentoo.org>. by subrata_modak · 16 years ago
- f413e9a I've attached some patches that I created for LTP at work. Most of them simply add command-line options to specify the amount of memory/pages to use for tests. However, there's one fix that works around a bug in uClibc's pthread implementation.Allow the number of iterations to be specified on the command line. Matt Fleming <mjf@gentoo.org>. by subrata_modak · 16 years ago
- 27efa4c I've attached some patches that I created for LTP at work. Most of them simply add command-line options to specify the amount of memory/pages to use for tests. However, there's one fix that works around a bug in uClibc's pthread implementation.Don't place an upper limit on the amount of time a nanosleep(2) call should take. The nanosleep(2) call will suspend execution for _at least_ the specified time, no upper limit is guaranteed. Matt Fleming <mjf@gentoo.org>. by subrata_modak · 16 years ago
- b6ecbe3 I've attached some patches that I created for LTP at work. Most of them simply add command-line options to specify the amount of memory/pages to use for tests. However, there's one fix that works around a bug in uClibc's pthread implementation. Allow the number of pages to use for the test to be specified on the command-line. Fix a memory leak. Also, call _exit(2) from child processes which avoids the child calling the atexit functions that the pthread library setup. This fixes an issue where the pthread manager thread would begin exiting at the same time as a child thread. The child thread would run the atexit functions which cause it to wait for a signal to be sent from the thread manager. As the thread manager was trying to exit that signal would never be sent. Calling _exit(2) from the child avoids this whole mess.Matt Fleming <mjf@gentoo.org>. by subrata_modak · 16 years ago
- 7e61536 I've attached some patches that I created for LTP at work. Most of them simply add command-line options to specify the amount of memory/pages to use for tests. However, there's one fix that works around a bug in uClibc's pthread implementation. It can be unsafe to call exit(3) from a signal handler. Call _exit(2) instead. by subrata_modak · 16 years ago
- be923e8 I've attached some patches that I created for LTP at work. Most of them simply add command-line options to specify the amount of memory/pages to use for tests. However, there's one fix that works around a bug in uClibc's pthread implementation. Allow the amount of memory to be used to be passed as a command-line argument. Matt Fleming <mjf@gentoo.org>. by subrata_modak · 16 years ago
- d040d03 Fixes the following issues: by subrata_modak · 16 years ago
- d371282 TEST_RETURN should not be inverted when logging. Signed-off-by: Masatake YAMATO <yamato@redhat.com>. by subrata_modak · 16 years ago
- 666a2ec Fix a bug in the selinux testsuite makefile, pointed out by David Howells. Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>. by subrata_modak · 16 years ago
- c5e3223 Every once in a while, pselect01 fails with the following output: by subrata_modak · 16 years ago
- f91d8ad I've tried LTP and found some wrong mode at creating file/dir in LTP source files. Here is a patch. Junjiro Okajima<hooanon05@yahoo.co.jp>. by subrata_modak · 16 years ago
- 7ff94df Changes for JUNE 2008 by subrata_modak · 16 years ago
- 20fff63 Fixing the run on supported kernels. by subrata_modak · 16 years ago
- 8e1b00f Changes to fix Build, Install and run on non-supported architectures. by subrata_modak · 16 years ago
- 23ddcbc Few Changes to ttype value. by subrata_modak · 16 years ago
- 5121ac4 I forget everytime to give execute permissions to the Shell scripts. Odd way of providing permission :-) by subrata_modak · 16 years ago
- 185f9ea I am proposing with the joined patch to allow the suite to be able the run the previous rpc tests (called now basic_tests). It needs to resolve some issues in the new "tirpc part" before allowing the suite to launch it again. Le Rouzic <aime.le-rouzic@bull.net>. by subrata_modak · 16 years ago
- e17b51c hackbench tests the Linux scheduler. Initial test was written by Rusty Russell <rusty@rustcorp.com.au>. Later modified by Pierre Peiffer <pierre.peiffer@bull.net>, Ingo Molnar <mingo@elte.hu>, Arjan van de Ven <arjan@infradead.org>, "Zhang, Yanmin" <yanmin_zhang@linux.intel.com>, Nathan Lynch <ntl@pobox.com> and others. Included in LTP by Subrata Modak<subrata@linux.vnet.ibm.com>, after Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>. by subrata_modak · 16 years ago
- feb4541 I'd like to use the mechanism you introduced in io_* testcases. So I've made 'io_cancel' string in the script and Makefile a variable to avoid mistake. I made the patch from testcases/kernel/syscalls/io_cancel/Makefile, not from ltp/testcases/kernel/syscalls/io_cancel/Makefile. Is this acceptable. CVS reports like testcases/kernel/syscalls/io_cancel/Makefile. Signed-off-by: Masatake YAMATO <yamato@redhat.com>. by subrata_modak · 16 years ago
- 06e466f This was ported from the Crackerjack Project by Masatake YAMATO <yamato@redhat.com>. by subrata_modak · 16 years ago
- 939b23a Here it is. Based on my last patch. by subrata_modak · 16 years ago
- bb20e79 Will be adding connectors in Future here. by subrata_modak · 16 years ago
- 49dcfa0 Addition of Initial set of Process Event Connectors by Li Zefan. Process event connector is a netlink connector that reports process events to userspace, and currently we have 5 kinds of process events, i.e. fork, exit, exec, uid, gid. There are total 5 test cases to test its functionality. But the test is not run by default, because I don't find a way to decide whether the underlying kernel supports this feather or not. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>. by subrata_modak · 16 years ago
- 5a69089 Attached a new patch just to add the same fixes I provided you for icpm and tcp network stress as well. On SH4 STB with STLinux distribution we are able to run all the network stress tests without any failures. Due to configuration issues we do not run the multi-diffnic tests (because they require plural Network cards for host). It modifies the command sent to the remote host to kill tcp/icmp clients. It also deletes the address before setting it to avoid the following error: "RTNETLINK answers: File exists". This implies that the test fails. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>. by subrata_modak · 16 years ago
- 7bbff8c This modifies the command sent to the remote host just to kill the ns-udpclient script. Indeed, it seems that the previous string always returns 1. Moreover, it adds a new check to verify if the return value is not empty. It could happen, for example, if the RSH returns sometime the following error: poll: protocol failure in circuit setup. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>. by subrata_modak · 16 years ago
- 36b8a4d Running the UDP network stress tests on my SH4 target I have had to modify the following scripts: killall_udp_traffic and udp4-multi-diffip01. It deletes the address before setting it to avoid the following error: RTNETLINK answers: File exists; it implies that the test fails. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>. by subrata_modak · 16 years ago
- 2e4cc0b Fixed the way how to run the "tc" command on the remote machine. Otherwise, we always get the following message on the local side: The remote host does not have netem functionality. Signed-off-by: Giuseppe Cavallaro@st.com. by subrata_modak · 16 years ago
- 482deaf Addition of enhanced test plan by Cai Qian <qcai@redhat.com>. by subrata_modak · 16 years ago
- 26dc572 The attached patch was necessary in order to get LTP to build for our embedded system at work. Without this patch testcases that use the my_getpwnam() library function suffer from redeclaration errors. Signed-off-by: Matt Fleming <mjf@gentoo.org>. by subrata_modak · 16 years ago
- 47471f7 This patch fix a concurrency issue in semctl06. The IPC keys used for this test could conflict with keys from another task. Signed-off-by: Matthieu Fertré <mfertre@irisa.fr>. by subrata_modak · 16 years ago
- 0e1f085 I found wrong format string usage in ltp/testcases/kernel/syscalls/exit/exit02.c: returned value from strerror is not used. Signed-off-by: Masatake YAMATO <yamato@redhat.com>. by subrata_modak · 16 years ago
- cd6dc3f I've ported a testcase for gettid() from crackerjack to ltp. I've added a directory ltp/testcases/kernel/syscalls/gettid. Signed-off-by: Masatake YAMATO <yamato@redhat.com> by subrata_modak · 16 years ago
- b23f123 Updating to include info about all other LTP man pages. Subrata Modak <subrata@linux.vnet.ibm.com> by subrata_modak · 16 years ago
- 37fabcf signal_test_05 failed on ia64 and x86_64, the following message outputed: by subrata_modak · 16 years ago
- 0d165eb signal_test_01 failed on ia64, the following message outputed: by subrata_modak · 16 years ago
- 454dad4 we have some truble with mapping api functions (such as tst_exit) in bash (./tools/apicmds/ltpapicmd.c). Now this problem may be fixed if added "exit" after tst_exit, but it's temporary. We should redesign this system and describe it in documentation. Andrew Vaggin <avagin@parallels.com>. by subrata_modak · 16 years ago
- f6e1b03 Looks like the else is missing since in both the cases where flag is set to one or not we get the test broken print. Signed-off-by: Max Stirling <vickyirobot@gmail.com>. by subrata_modak · 16 years ago
- a5765f2 This patch ensures that async_handler and async_handler_jk runs by default. Also the profile/default is updated to reflect the same. Signed-Off-By: Chirag <chirag@linux.vnet.ibm.com>. by subrata_modak · 16 years ago
- 95d95b4 Included the statement: by subrata_modak · 16 years ago
- abecc21 Fix a bug in the sigiotask test and enable the test_fdreceive policy to build against the latest refpolicy headers. Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>. by subrata_modak · 16 years ago