| # Doxyfile 1.5.3 |
| |
| # This file describes the settings to be used by the documentation system |
| # doxygen (www.doxygen.org) for a project |
| # |
| # All text after a hash (#) is considered a comment and will be ignored |
| # The format is: |
| # TAG = value [value, ...] |
| # For lists items can also be appended using: |
| # TAG += value [value, ...] |
| # Values that contain spaces should be placed between quotes (" ") |
| |
| #--------------------------------------------------------------------------- |
| # Project related configuration options |
| #--------------------------------------------------------------------------- |
| |
| # This tag specifies the encoding used for all characters in the config file that |
| # follow. The default is UTF-8 which is also the encoding used for all text before |
| # the first occurrence of this tag. Doxygen uses libiconv (or the iconv built into |
| # libc) for the transcoding. See http://www.gnu.org/software/libiconv for the list of |
| # possible encodings. |
| |
| DOXYFILE_ENCODING = UTF-8 |
| |
| # The PROJECT_NAME tag is a single word (or a sequence of words surrounded |
| # by quotes) that should identify the project. |
| |
| PROJECT_NAME = Gallium3D |
| |
| # The PROJECT_NUMBER tag can be used to enter a project or revision number. |
| # This could be handy for archiving the generated documentation or |
| # if some version control system is used. |
| |
| PROJECT_NUMBER = 0.1 |
| |
| # The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) |
| # base path where the generated documentation will be put. |
| # If a relative path is entered, it will be relative to the location |
| # where doxygen was started. If left blank the current directory will be used. |
| |
| OUTPUT_DIRECTORY = gallium |
| |
| # If the CREATE_SUBDIRS tag is set to YES, then doxygen will create |
| # 4096 sub-directories (in 2 levels) under the output directory of each output |
| # format and will distribute the generated files over these directories. |
| # Enabling this option can be useful when feeding doxygen a huge amount of |
| # source files, where putting all generated files in the same directory would |
| # otherwise cause performance problems for the file system. |
| |
| CREATE_SUBDIRS = NO |
| |
| # The OUTPUT_LANGUAGE tag is used to specify the language in which all |
| # documentation generated by doxygen is written. Doxygen will use this |
| # information to generate all constant output in the proper language. |
| # The default language is English, other supported languages are: |
| # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, |
| # Croatian, Czech, Danish, Dutch, Finnish, French, German, Greek, Hungarian, |
| # Italian, Japanese, Japanese-en (Japanese with English messages), Korean, |
| # Korean-en, Lithuanian, Norwegian, Polish, Portuguese, Romanian, Russian, |
| # Serbian, Slovak, Slovene, Spanish, Swedish, and Ukrainian. |
| |
| OUTPUT_LANGUAGE = English |
| |
| # If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will |
| # include brief member descriptions after the members that are listed in |
| # the file and class documentation (similar to JavaDoc). |
| # Set to NO to disable this. |
| |
| BRIEF_MEMBER_DESC = YES |
| |
| # If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend |
| # the brief description of a member or function before the detailed description. |
| # Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the |
| # brief descriptions will be completely suppressed. |
| |
| REPEAT_BRIEF = YES |
| |
| # This tag implements a quasi-intelligent brief description abbreviator |
| # that is used to form the text in various listings. Each string |
| # in this list, if found as the leading text of the brief description, will be |
| # stripped from the text and the result after processing the whole list, is |
| # used as the annotated text. Otherwise, the brief description is used as-is. |
| # If left blank, the following values are used ("$name" is automatically |
| # replaced with the name of the entity): "The $name class" "The $name widget" |
| # "The $name file" "is" "provides" "specifies" "contains" |
| # "represents" "a" "an" "the" |
| |
| ABBREVIATE_BRIEF = |
| |
| # If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then |
| # Doxygen will generate a detailed section even if there is only a brief |
| # description. |
| |
| ALWAYS_DETAILED_SEC = NO |
| |
| # If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all |
| # inherited members of a class in the documentation of that class as if those |
| # members were ordinary class members. Constructors, destructors and assignment |
| # operators of the base classes will not be shown. |
| |
| INLINE_INHERITED_MEMB = NO |
| |
| # If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full |
| # path before files name in the file list and in the header files. If set |
| # to NO the shortest path that makes the file name unique will be used. |
| |
| FULL_PATH_NAMES = YES |
| |
| # If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag |
| # can be used to strip a user-defined part of the path. Stripping is |
| # only done if one of the specified strings matches the left-hand part of |
| # the path. The tag can be used to show relative paths in the file list. |
| # If left blank the directory from which doxygen is run is used as the |
| # path to strip. |
| |
| STRIP_FROM_PATH = ../src/mesa |
| |
| # The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of |
| # the path mentioned in the documentation of a class, which tells |
| # the reader which header file to include in order to use a class. |
| # If left blank only the name of the header file containing the class |
| # definition is used. Otherwise one should specify the include paths that |
| # are normally passed to the compiler using the -I flag. |
| |
| STRIP_FROM_INC_PATH = |
| |
| # If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter |
| # (but less readable) file names. This can be useful is your file systems |
| # doesn't support long names like on DOS, Mac, or CD-ROM. |
| |
| SHORT_NAMES = NO |
| |
| # If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen |
| # will interpret the first line (until the first dot) of a JavaDoc-style |
| # comment as the brief description. If set to NO, the JavaDoc |
| # comments will behave just like regular Qt-style comments |
| # (thus requiring an explicit @brief command for a brief description.) |
| |
| JAVADOC_AUTOBRIEF = YES |
| |
| # If the QT_AUTOBRIEF tag is set to YES then Doxygen will |
| # interpret the first line (until the first dot) of a Qt-style |
| # comment as the brief description. If set to NO, the comments |
| # will behave just like regular Qt-style comments (thus requiring |
| # an explicit \brief command for a brief description.) |
| |
| QT_AUTOBRIEF = YES |
| |
| # The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen |
| # treat a multi-line C++ special comment block (i.e. a block of //! or /// |
| # comments) as a brief description. This used to be the default behaviour. |
| # The new default is to treat a multi-line C++ comment block as a detailed |
| # description. Set this tag to YES if you prefer the old behaviour instead. |
| |
| MULTILINE_CPP_IS_BRIEF = NO |
| |
| # If the DETAILS_AT_TOP tag is set to YES then Doxygen |
| # will output the detailed description near the top, like JavaDoc. |
| # If set to NO, the detailed description appears after the member |
| # documentation. |
| |
| DETAILS_AT_TOP = NO |
| |
| # If the INHERIT_DOCS tag is set to YES (the default) then an undocumented |
| # member inherits the documentation from any documented member that it |
| # re-implements. |
| |
| INHERIT_DOCS = YES |
| |
| # If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce |
| # a new page for each member. If set to NO, the documentation of a member will |
| # be part of the file/class/namespace that contains it. |
| |
| SEPARATE_MEMBER_PAGES = NO |
| |
| # The TAB_SIZE tag can be used to set the number of spaces in a tab. |
| # Doxygen uses this value to replace tabs by spaces in code fragments. |
| |
| TAB_SIZE = 8 |
| |
| # This tag can be used to specify a number of aliases that acts |
| # as commands in the documentation. An alias has the form "name=value". |
| # For example adding "sideeffect=\par Side Effects:\n" will allow you to |
| # put the command \sideeffect (or @sideeffect) in the documentation, which |
| # will result in a user-defined paragraph with heading "Side Effects:". |
| # You can put \n's in the value part of an alias to insert newlines. |
| |
| ALIASES = |
| |
| # Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C |
| # sources only. Doxygen will then generate output that is more tailored for C. |
| # For instance, some of the names that are used will be different. The list |
| # of all members will be omitted, etc. |
| |
| OPTIMIZE_OUTPUT_FOR_C = YES |
| |
| # Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java |
| # sources only. Doxygen will then generate output that is more tailored for Java. |
| # For instance, namespaces will be presented as packages, qualified scopes |
| # will look different, etc. |
| |
| OPTIMIZE_OUTPUT_JAVA = NO |
| |
| # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want to |
| # include (a tag file for) the STL sources as input, then you should |
| # set this tag to YES in order to let doxygen match functions declarations and |
| # definitions whose arguments contain STL classes (e.g. func(std::string); v.s. |
| # func(std::string) {}). This also make the inheritance and collaboration |
| # diagrams that involve STL classes more complete and accurate. |
| |
| BUILTIN_STL_SUPPORT = NO |
| |
| # If you use Microsoft's C++/CLI language, you should set this option to YES to |
| # enable parsing support. |
| |
| CPP_CLI_SUPPORT = NO |
| |
| # If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC |
| # tag is set to YES, then doxygen will reuse the documentation of the first |
| # member in the group (if any) for the other members of the group. By default |
| # all members of a group must be documented explicitly. |
| |
| DISTRIBUTE_GROUP_DOC = NO |
| |
| # Set the SUBGROUPING tag to YES (the default) to allow class member groups of |
| # the same type (for instance a group of public functions) to be put as a |
| # subgroup of that type (e.g. under the Public Functions section). Set it to |
| # NO to prevent subgrouping. Alternatively, this can be done per class using |
| # the \nosubgrouping command. |
| |
| SUBGROUPING = YES |
| |
| #--------------------------------------------------------------------------- |
| # Build related configuration options |
| #--------------------------------------------------------------------------- |
| |
| # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in |
| # documentation are documented, even if no documentation was available. |
| # Private class members and static file members will be hidden unless |
| # the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES |
| |
| EXTRACT_ALL = YES |
| |
| # If the EXTRACT_PRIVATE tag is set to YES all private members of a class |
| # will be included in the documentation. |
| |
| EXTRACT_PRIVATE = YES |
| |
| # If the EXTRACT_STATIC tag is set to YES all static members of a file |
| # will be included in the documentation. |
| |
| EXTRACT_STATIC = YES |
| |
| # If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) |
| # defined locally in source files will be included in the documentation. |
| # If set to NO only classes defined in header files are included. |
| |
| EXTRACT_LOCAL_CLASSES = YES |
| |
| # This flag is only useful for Objective-C code. When set to YES local |
| # methods, which are defined in the implementation section but not in |
| # the interface are included in the documentation. |
| # If set to NO (the default) only methods in the interface are included. |
| |
| EXTRACT_LOCAL_METHODS = NO |
| |
| # If this flag is set to YES, the members of anonymous namespaces will be extracted |
| # and appear in the documentation as a namespace called 'anonymous_namespace{file}', |
| # where file will be replaced with the base name of the file that contains the anonymous |
| # namespace. By default anonymous namespace are hidden. |
| |
| EXTRACT_ANON_NSPACES = NO |
| |
| # If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all |
| # undocumented members of documented classes, files or namespaces. |
| # If set to NO (the default) these members will be included in the |
| # various overviews, but no documentation section is generated. |
| # This option has no effect if EXTRACT_ALL is enabled. |
| |
| HIDE_UNDOC_MEMBERS = NO |
| |
| # If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all |
| # undocumented classes that are normally visible in the class hierarchy. |
| # If set to NO (the default) these classes will be included in the various |
| # overviews. This option has no effect if EXTRACT_ALL is enabled. |
| |
| HIDE_UNDOC_CLASSES = NO |
| |
| # If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all |
| # friend (class|struct|union) declarations. |
| # If set to NO (the default) these declarations will be included in the |
| # documentation. |
| |
| HIDE_FRIEND_COMPOUNDS = NO |
| |
| # If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any |
| # documentation blocks found inside the body of a function. |
| # If set to NO (the default) these blocks will be appended to the |
| # function's detailed documentation block. |
| |
| HIDE_IN_BODY_DOCS = NO |
| |
| # The INTERNAL_DOCS tag determines if documentation |
| # that is typed after a \internal command is included. If the tag is set |
| # to NO (the default) then the documentation will be excluded. |
| # Set it to YES to include the internal documentation. |
| |
| INTERNAL_DOCS = NO |
| |
| # If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate |
| # file names in lower-case letters. If set to YES upper-case letters are also |
| # allowed. This is useful if you have classes or files whose names only differ |
| # in case and if your file system supports case sensitive file names. Windows |
| # and Mac users are advised to set this option to NO. |
| |
| CASE_SENSE_NAMES = YES |
| |
| # If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen |
| # will show members with their full class and namespace scopes in the |
| # documentation. If set to YES the scope will be hidden. |
| |
| HIDE_SCOPE_NAMES = NO |
| |
| # If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen |
| # will put a list of the files that are included by a file in the documentation |
| # of that file. |
| |
| SHOW_INCLUDE_FILES = NO |
| |
| # If the INLINE_INFO tag is set to YES (the default) then a tag [inline] |
| # is inserted in the documentation for inline members. |
| |
| INLINE_INFO = NO |
| |
| # If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen |
| # will sort the (detailed) documentation of file and class members |
| # alphabetically by member name. If set to NO the members will appear in |
| # declaration order. |
| |
| SORT_MEMBER_DOCS = YES |
| |
| # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the |
| # brief documentation of file, namespace and class members alphabetically |
| # by member name. If set to NO (the default) the members will appear in |
| # declaration order. |
| |
| SORT_BRIEF_DOCS = NO |
| |
| # If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be |
| # sorted by fully-qualified names, including namespaces. If set to |
| # NO (the default), the class list will be sorted only by class name, |
| # not including the namespace part. |
| # Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. |
| # Note: This option applies only to the class list, not to the |
| # alphabetical list. |
| |
| SORT_BY_SCOPE_NAME = NO |
| |
| # The GENERATE_TODOLIST tag can be used to enable (YES) or |
| # disable (NO) the todo list. This list is created by putting \todo |
| # commands in the documentation. |
| |
| GENERATE_TODOLIST = NO |
| |
| # The GENERATE_TESTLIST tag can be used to enable (YES) or |
| # disable (NO) the test list. This list is created by putting \test |
| # commands in the documentation. |
| |
| GENERATE_TESTLIST = NO |
| |
| # The GENERATE_BUGLIST tag can be used to enable (YES) or |
| # disable (NO) the bug list. This list is created by putting \bug |
| # commands in the documentation. |
| |
| GENERATE_BUGLIST = NO |
| |
| # The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or |
| # disable (NO) the deprecated list. This list is created by putting |
| # \deprecated commands in the documentation. |
| |
| GENERATE_DEPRECATEDLIST= YES |
| |
| # The ENABLED_SECTIONS tag can be used to enable conditional |
| # documentation sections, marked by \if sectionname ... \endif. |
| |
| ENABLED_SECTIONS = |
| |
| # The MAX_INITIALIZER_LINES tag determines the maximum number of lines |
| # the initial value of a variable or define consists of for it to appear in |
| # the documentation. If the initializer consists of more lines than specified |
| # here it will be hidden. Use a value of 0 to hide initializers completely. |
| # The appearance of the initializer of individual variables and defines in the |
| # documentation can be controlled using \showinitializer or \hideinitializer |
| # command in the documentation regardless of this setting. |
| |
| MAX_INITIALIZER_LINES = 30 |
| |
| # Set the SHOW_USED_FILES tag to NO to disable the list of files generated |
| # at the bottom of the documentation of classes and structs. If set to YES the |
| # list will mention the files that were used to generate the documentation. |
| |
| SHOW_USED_FILES = YES |
| |
| # If the sources in your project are distributed over multiple directories |
| # then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy |
| # in the documentation. The default is NO. |
| |
| SHOW_DIRECTORIES = YES |
| |
| # The FILE_VERSION_FILTER tag can be used to specify a program or script that |
| # doxygen should invoke to get the current version for each file (typically from the |
| # version control system). Doxygen will invoke the program by executing (via |
| # popen()) the command <command> <input-file>, where <command> is the value of |
| # the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file |
| # provided by doxygen. Whatever the program writes to standard output |
| # is used as the file version. See the manual for examples. |
| |
| FILE_VERSION_FILTER = |
| |
| #--------------------------------------------------------------------------- |
| # configuration options related to warning and progress messages |
| #--------------------------------------------------------------------------- |
| |
| # The QUIET tag can be used to turn on/off the messages that are generated |
| # by doxygen. Possible values are YES and NO. If left blank NO is used. |
| |
| QUIET = NO |
| |
| # The WARNINGS tag can be used to turn on/off the warning messages that are |
| # generated by doxygen. Possible values are YES and NO. If left blank |
| # NO is used. |
| |
| WARNINGS = YES |
| |
| # If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings |
| # for undocumented members. If EXTRACT_ALL is set to YES then this flag will |
| # automatically be disabled. |
| |
| WARN_IF_UNDOCUMENTED = YES |
| |
| # If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for |
| # potential errors in the documentation, such as not documenting some |
| # parameters in a documented function, or documenting parameters that |
| # don't exist or using markup commands wrongly. |
| |
| WARN_IF_DOC_ERROR = YES |
| |
| # This WARN_NO_PARAMDOC option can be abled to get warnings for |
| # functions that are documented, but have no documentation for their parameters |
| # or return value. If set to NO (the default) doxygen will only warn about |
| # wrong or incomplete parameter documentation, but not about the absence of |
| # documentation. |
| |
| WARN_NO_PARAMDOC = NO |
| |
| # The WARN_FORMAT tag determines the format of the warning messages that |
| # doxygen can produce. The string should contain the $file, $line, and $text |
| # tags, which will be replaced by the file and line number from which the |
| # warning originated and the warning text. Optionally the format may contain |
| # $version, which will be replaced by the version of the file (if it could |
| # be obtained via FILE_VERSION_FILTER) |
| |
| WARN_FORMAT = "$file:$line: $text" |
| |
| # The WARN_LOGFILE tag can be used to specify a file to which warning |
| # and error messages should be written. If left blank the output is written |
| # to stderr. |
| |
| WARN_LOGFILE = |
| |
| #--------------------------------------------------------------------------- |
| # configuration options related to the input files |
| #--------------------------------------------------------------------------- |
| |
| # The INPUT tag can be used to specify the files and/or directories that contain |
| # documented source files. You may enter file names like "myfile.cpp" or |
| # directories like "/usr/src/myproject". Separate the files or directories |
| # with spaces. |
| |
| INPUT = gallium.doc \ |
| ../src/mesa/pipe \ |
| ../src/mesa/state_tracker \ |
| ../src/mesa/drivers/dri/intel_winsys |
| |
| # This tag can be used to specify the character encoding of the source files that |
| # doxygen parses. Internally doxygen uses the UTF-8 encoding, which is also the default |
| # input encoding. Doxygen uses libiconv (or the iconv built into libc) for the transcoding. |
| # See http://www.gnu.org/software/libiconv for the list of possible encodings. |
| |
| INPUT_ENCODING = UTF-8 |
| |
| # If the value of the INPUT tag contains directories, you can use the |
| # FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp |
| # and *.h) to filter out the source-files in the directories. If left |
| # blank the following patterns are tested: |
| # *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx |
| # *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py |
| |
| FILE_PATTERNS = *.c *.h |
| |
| # The RECURSIVE tag can be used to turn specify whether or not subdirectories |
| # should be searched for input files as well. Possible values are YES and NO. |
| # If left blank NO is used. |
| |
| RECURSIVE = YES |
| |
| # The EXCLUDE tag can be used to specify files and/or directories that should |
| # excluded from the INPUT source files. This way you can easily exclude a |
| # subdirectory from a directory tree whose root is specified with the INPUT tag. |
| |
| EXCLUDE = |
| |
| # The EXCLUDE_SYMLINKS tag can be used select whether or not files or |
| # directories that are symbolic links (a Unix filesystem feature) are excluded |
| # from the input. |
| |
| EXCLUDE_SYMLINKS = NO |
| |
| # If the value of the INPUT tag contains directories, you can use the |
| # EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude |
| # certain files from those directories. Note that the wildcards are matched |
| # against the file with absolute path, so to exclude all test directories |
| # for example use the pattern */test/* |
| |
| EXCLUDE_PATTERNS = |
| |
| # The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names |
| # (namespaces, classes, functions, etc.) that should be excluded from the output. |
| # The symbol name can be a fully qualified name, a word, or if the wildcard * is used, |
| # a substring. Examples: ANamespace, AClass, AClass::ANamespace, ANamespace::*Test |
| |
| EXCLUDE_SYMBOLS = |
| |
| # The EXAMPLE_PATH tag can be used to specify one or more files or |
| # directories that contain example code fragments that are included (see |
| # the \include command). |
| |
| EXAMPLE_PATH = |
| |
| # If the value of the EXAMPLE_PATH tag contains directories, you can use the |
| # EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp |
| # and *.h) to filter out the source-files in the directories. If left |
| # blank all files are included. |
| |
| EXAMPLE_PATTERNS = |
| |
| # If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be |
| # searched for input files to be used with the \include or \dontinclude |
| # commands irrespective of the value of the RECURSIVE tag. |
| # Possible values are YES and NO. If left blank NO is used. |
| |
| EXAMPLE_RECURSIVE = NO |
| |
| # The IMAGE_PATH tag can be used to specify one or more files or |
| # directories that contain image that are included in the documentation (see |
| # the \image command). |
| |
| IMAGE_PATH = |
| |
| # The INPUT_FILTER tag can be used to specify a program that doxygen should |
| # invoke to filter for each input file. Doxygen will invoke the filter program |
| # by executing (via popen()) the command <filter> <input-file>, where <filter> |
| # is the value of the INPUT_FILTER tag, and <input-file> is the name of an |
| # input file. Doxygen will then use the output that the filter program writes |
| # to standard output. If FILTER_PATTERNS is specified, this tag will be |
| # ignored. |
| |
| INPUT_FILTER = |
| |
| # The FILTER_PATTERNS tag can be used to specify filters on a per file pattern |
| # basis. Doxygen will compare the file name with each pattern and apply the |
| # filter if there is a match. The filters are a list of the form: |
| # pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further |
| # info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER |
| # is applied to all files. |
| |
| FILTER_PATTERNS = |
| |
| # If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using |
| # INPUT_FILTER) will be used to filter the input files when producing source |
| # files to browse (i.e. when SOURCE_BROWSER is set to YES). |
| |
| FILTER_SOURCE_FILES = NO |
| |
| #--------------------------------------------------------------------------- |
| # configuration options related to source browsing |
| #--------------------------------------------------------------------------- |
| |
| # If the SOURCE_BROWSER tag is set to YES then a list of source files will |
| # be generated. Documented entities will be cross-referenced with these sources. |
| # Note: To get rid of all source code in the generated output, make sure also |
| # VERBATIM_HEADERS is set to NO. If you have enabled CALL_GRAPH or CALLER_GRAPH |
| # then you must also enable this option. If you don't then doxygen will produce |
| # a warning and turn it on anyway |
| |
| SOURCE_BROWSER = YES |
| |
| # Setting the INLINE_SOURCES tag to YES will include the body |
| # of functions and classes directly in the documentation. |
| |
| INLINE_SOURCES = YES |
| |
| # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct |
| # doxygen to hide any special comment blocks from generated source code |
| # fragments. Normal C and C++ comments will always remain visible. |
| |
| STRIP_CODE_COMMENTS = YES |
| |
| # If the REFERENCED_BY_RELATION tag is set to YES (the default) |
| # then for each documented function all documented |
| # functions referencing it will be listed. |
| |
| REFERENCED_BY_RELATION = NO |
| |
| # If the REFERENCES_RELATION tag is set to YES (the default) |
| # then for each documented function all documented entities |
| # called/used by that function will be listed. |
| |
| REFERENCES_RELATION = YES |
| |
| # If the REFERENCES_LINK_SOURCE tag is set to YES (the default) |
| # and SOURCE_BROWSER tag is set to YES, then the hyperlinks from |
| # functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will |
| # link to the source code. Otherwise they will link to the documentstion. |
| |
| REFERENCES_LINK_SOURCE = YES |
| |
| # If the USE_HTAGS tag is set to YES then the references to source code |
| # will point to the HTML generated by the htags(1) tool instead of doxygen |
| # built-in source browser. The htags tool is part of GNU's global source |
| # tagging system (see http://www.gnu.org/software/global/global.html). You |
| # will need version 4.8.6 or higher. |
| |
| USE_HTAGS = NO |
| |
| # If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen |
| # will generate a verbatim copy of the header file for each class for |
| # which an include is specified. Set to NO to disable this. |
| |
| VERBATIM_HEADERS = NO |
| |
| #--------------------------------------------------------------------------- |
| # configuration options related to the alphabetical class index |
| #--------------------------------------------------------------------------- |
| |
| # If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index |
| # of all compounds will be generated. Enable this if the project |
| # contains a lot of classes, structs, unions or interfaces. |
| |
| ALPHABETICAL_INDEX = NO |
| |
| # If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then |
| # the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns |
| # in which this list will be split (can be a number in the range [1..20]) |
| |
| COLS_IN_ALPHA_INDEX = 5 |
| |
| # In case all classes in a project start with a common prefix, all |
| # classes will be put under the same header in the alphabetical index. |
| # The IGNORE_PREFIX tag can be used to specify one or more prefixes that |
| # should be ignored while generating the index headers. |
| |
| IGNORE_PREFIX = |
| |
| #--------------------------------------------------------------------------- |
| # configuration options related to the HTML output |
| #--------------------------------------------------------------------------- |
| |
| # If the GENERATE_HTML tag is set to YES (the default) Doxygen will |
| # generate HTML output. |
| |
| GENERATE_HTML = YES |
| |
| # The HTML_OUTPUT tag is used to specify where the HTML docs will be put. |
| # If a relative path is entered the value of OUTPUT_DIRECTORY will be |
| # put in front of it. If left blank `html' will be used as the default path. |
| |
| HTML_OUTPUT = . |
| |
| # The HTML_FILE_EXTENSION tag can be used to specify the file extension for |
| # each generated HTML page (for example: .htm,.php,.asp). If it is left blank |
| # doxygen will generate files with .html extension. |
| |
| HTML_FILE_EXTENSION = .html |
| |
| # The HTML_HEADER tag can be used to specify a personal HTML header for |
| # each generated HTML page. If it is left blank doxygen will generate a |
| # standard header. |
| |
| HTML_HEADER = |
| |
| # The HTML_FOOTER tag can be used to specify a personal HTML footer for |
| # each generated HTML page. If it is left blank doxygen will generate a |
| # standard footer. |
| |
| HTML_FOOTER = |
| |
| # The HTML_STYLESHEET tag can be used to specify a user-defined cascading |
| # style sheet that is used by each HTML page. It can be used to |
| # fine-tune the look of the HTML output. If the tag is left blank doxygen |
| # will generate a default style sheet. Note that doxygen will try to copy |
| # the style sheet file to the HTML output directory, so don't put your own |
| # stylesheet in the HTML output directory as well, or it will be erased! |
| |
| HTML_STYLESHEET = |
| |
| # If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, |
| # files or namespaces will be aligned in HTML using tables. If set to |
| # NO a bullet list will be used. |
| |
| HTML_ALIGN_MEMBERS = YES |
| |
| # If the GENERATE_HTMLHELP tag is set to YES, additional index files |
| # will be generated that can be used as input for tools like the |
| # Microsoft HTML help workshop to generate a compressed HTML help file (.chm) |
| # of the generated HTML documentation. |
| |
| GENERATE_HTMLHELP = NO |
| |
| # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML |
| # documentation will contain sections that can be hidden and shown after the |
| # page has loaded. For this to work a browser that supports |
| # JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox |
| # Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). |
| |
| HTML_DYNAMIC_SECTIONS = NO |
| |
| # If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can |
| # be used to specify the file name of the resulting .chm file. You |
| # can add a path in front of the file if the result should not be |
| # written to the html output directory. |
| |
| CHM_FILE = |
| |
| # If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can |
| # be used to specify the location (absolute path including file name) of |
| # the HTML help compiler (hhc.exe). If non-empty doxygen will try to run |
| # the HTML help compiler on the generated index.hhp. |
| |
| HHC_LOCATION = |
| |
| # If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag |
| # controls if a separate .chi index file is generated (YES) or that |
| # it should be included in the master .chm file (NO). |
| |
| GENERATE_CHI = NO |
| |
| # If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag |
| # controls whether a binary table of contents is generated (YES) or a |
| # normal table of contents (NO) in the .chm file. |
| |
| BINARY_TOC = NO |
| |
| # The TOC_EXPAND flag can be set to YES to add extra items for group members |
| # to the contents of the HTML help documentation and to the tree view. |
| |
| TOC_EXPAND = NO |
| |
| # The DISABLE_INDEX tag can be used to turn on/off the condensed index at |
| # top of each HTML page. The value NO (the default) enables the index and |
| # the value YES disables it. |
| |
| DISABLE_INDEX = NO |
| |
| # This tag can be used to set the number of enum values (range [1..20]) |
| # that doxygen will group on one line in the generated HTML documentation. |
| |
| ENUM_VALUES_PER_LINE = 4 |
| |
| # If the GENERATE_TREEVIEW tag is set to YES, a side panel will be |
| # generated containing a tree-like index structure (just like the one that |
| # is generated for HTML Help). For this to work a browser that supports |
| # JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+, |
| # Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are |
| # probably better off using the HTML help feature. |
| |
| GENERATE_TREEVIEW = NO |
| |
| # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be |
| # used to set the initial width (in pixels) of the frame in which the tree |
| # is shown. |
| |
| TREEVIEW_WIDTH = 250 |
| |
| #--------------------------------------------------------------------------- |
| # configuration options related to the LaTeX output |
| #--------------------------------------------------------------------------- |
| |
| # If the GENERATE_LATEX tag is set to YES (the default) Doxygen will |
| # generate Latex output. |
| |
| GENERATE_LATEX = NO |
| |
| # The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. |
| # If a relative path is entered the value of OUTPUT_DIRECTORY will be |
| # put in front of it. If left blank `latex' will be used as the default path. |
| |
| LATEX_OUTPUT = latex |
| |
| # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be |
| # invoked. If left blank `latex' will be used as the default command name. |
| |
| LATEX_CMD_NAME = latex |
| |
| # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to |
| # generate index for LaTeX. If left blank `makeindex' will be used as the |
| # default command name. |
| |
| MAKEINDEX_CMD_NAME = makeindex |
| |
| # If the COMPACT_LATEX tag is set to YES Doxygen generates more compact |
| # LaTeX documents. This may be useful for small projects and may help to |
| # save some trees in general. |
| |
| COMPACT_LATEX = NO |
| |
| # The PAPER_TYPE tag can be used to set the paper type that is used |
| # by the printer. Possible values are: a4, a4wide, letter, legal and |
| # executive. If left blank a4wide will be used. |
| |
| PAPER_TYPE = a4wide |
| |
| # The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX |
| # packages that should be included in the LaTeX output. |
| |
| EXTRA_PACKAGES = |
| |
| # The LATEX_HEADER tag can be used to specify a personal LaTeX header for |
| # the generated latex document. The header should contain everything until |
| # the first chapter. If it is left blank doxygen will generate a |
| # standard header. Notice: only use this tag if you know what you are doing! |
| |
| LATEX_HEADER = |
| |
| # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated |
| # is prepared for conversion to pdf (using ps2pdf). The pdf file will |
| # contain links (just like the HTML output) instead of page references |
| # This makes the output suitable for online browsing using a pdf viewer. |
| |
| PDF_HYPERLINKS = NO |
| |
| # If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of |
| # plain latex in the generated Makefile. Set this option to YES to get a |
| # higher quality PDF documentation. |
| |
| USE_PDFLATEX = NO |
| |
| # If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. |
| # command to the generated LaTeX files. This will instruct LaTeX to keep |
| # running if errors occur, instead of asking the user for help. |
| # This option is also used when generating formulas in HTML. |
| |
| LATEX_BATCHMODE = NO |
| |
| # If LATEX_HIDE_INDICES is set to YES then doxygen will not |
| # include the index chapters (such as File Index, Compound Index, etc.) |
| # in the output. |
| |
| LATEX_HIDE_INDICES = NO |
| |
| #--------------------------------------------------------------------------- |
| # configuration options related to the RTF output |
| #--------------------------------------------------------------------------- |
| |
| # If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output |
| # The RTF output is optimized for Word 97 and may not look very pretty with |
| # other RTF readers or editors. |
| |
| GENERATE_RTF = NO |
| |
| # The RTF_OUTPUT tag is used to specify where the RTF docs will be put. |
| # If a relative path is entered the value of OUTPUT_DIRECTORY will be |
| # put in front of it. If left blank `rtf' will be used as the default path. |
| |
| RTF_OUTPUT = rtf |
| |
| # If the COMPACT_RTF tag is set to YES Doxygen generates more compact |
| # RTF documents. This may be useful for small projects and may help to |
| # save some trees in general. |
| |
| COMPACT_RTF = NO |
| |
| # If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated |
| # will contain hyperlink fields. The RTF file will |
| # contain links (just like the HTML output) instead of page references. |
| # This makes the output suitable for online browsing using WORD or other |
| # programs which support those fields. |
| # Note: wordpad (write) and others do not support links. |
| |
| RTF_HYPERLINKS = NO |
| |
| # Load stylesheet definitions from file. Syntax is similar to doxygen's |
| # config file, i.e. a series of assignments. You only have to provide |
| # replacements, missing definitions are set to their default value. |
| |
| RTF_STYLESHEET_FILE = |
| |
| # Set optional variables used in the generation of an rtf document. |
| # Syntax is similar to doxygen's config file. |
| |
| RTF_EXTENSIONS_FILE = |
| |
| #--------------------------------------------------------------------------- |
| # configuration options related to the man page output |
| #--------------------------------------------------------------------------- |
| |
| # If the GENERATE_MAN tag is set to YES (the default) Doxygen will |
| # generate man pages |
| |
| GENERATE_MAN = NO |
| |
| # The MAN_OUTPUT tag is used to specify where the man pages will be put. |
| # If a relative path is entered the value of OUTPUT_DIRECTORY will be |
| # put in front of it. If left blank `man' will be used as the default path. |
| |
| MAN_OUTPUT = man |
| |
| # The MAN_EXTENSION tag determines the extension that is added to |
| # the generated man pages (default is the subroutine's section .3) |
| |
| MAN_EXTENSION = .3 |
| |
| # If the MAN_LINKS tag is set to YES and Doxygen generates man output, |
| # then it will generate one additional man file for each entity |
| # documented in the real man page(s). These additional files |
| # only source the real man page, but without them the man command |
| # would be unable to find the correct page. The default is NO. |
| |
| MAN_LINKS = NO |
| |
| #--------------------------------------------------------------------------- |
| # configuration options related to the XML output |
| #--------------------------------------------------------------------------- |
| |
| # If the GENERATE_XML tag is set to YES Doxygen will |
| # generate an XML file that captures the structure of |
| # the code including all documentation. |
| |
| GENERATE_XML = NO |
| |
| # The XML_OUTPUT tag is used to specify where the XML pages will be put. |
| # If a relative path is entered the value of OUTPUT_DIRECTORY will be |
| # put in front of it. If left blank `xml' will be used as the default path. |
| |
| XML_OUTPUT = xml |
| |
| # The XML_SCHEMA tag can be used to specify an XML schema, |
| # which can be used by a validating XML parser to check the |
| # syntax of the XML files. |
| |
| XML_SCHEMA = |
| |
| # The XML_DTD tag can be used to specify an XML DTD, |
| # which can be used by a validating XML parser to check the |
| # syntax of the XML files. |
| |
| XML_DTD = |
| |
| # If the XML_PROGRAMLISTING tag is set to YES Doxygen will |
| # dump the program listings (including syntax highlighting |
| # and cross-referencing information) to the XML output. Note that |
| # enabling this will significantly increase the size of the XML output. |
| |
| XML_PROGRAMLISTING = YES |
| |
| #--------------------------------------------------------------------------- |
| # configuration options for the AutoGen Definitions output |
| #--------------------------------------------------------------------------- |
| |
| # If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will |
| # generate an AutoGen Definitions (see autogen.sf.net) file |
| # that captures the structure of the code including all |
| # documentation. Note that this feature is still experimental |
| # and incomplete at the moment. |
| |
| GENERATE_AUTOGEN_DEF = NO |
| |
| #--------------------------------------------------------------------------- |
| # configuration options related to the Perl module output |
| #--------------------------------------------------------------------------- |
| |
| # If the GENERATE_PERLMOD tag is set to YES Doxygen will |
| # generate a Perl module file that captures the structure of |
| # the code including all documentation. Note that this |
| # feature is still experimental and incomplete at the |
| # moment. |
| |
| GENERATE_PERLMOD = NO |
| |
| # If the PERLMOD_LATEX tag is set to YES Doxygen will generate |
| # the necessary Makefile rules, Perl scripts and LaTeX code to be able |
| # to generate PDF and DVI output from the Perl module output. |
| |
| PERLMOD_LATEX = NO |
| |
| # If the PERLMOD_PRETTY tag is set to YES the Perl module output will be |
| # nicely formatted so it can be parsed by a human reader. This is useful |
| # if you want to understand what is going on. On the other hand, if this |
| # tag is set to NO the size of the Perl module output will be much smaller |
| # and Perl will parse it just the same. |
| |
| PERLMOD_PRETTY = YES |
| |
| # The names of the make variables in the generated doxyrules.make file |
| # are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. |
| # This is useful so different doxyrules.make files included by the same |
| # Makefile don't overwrite each other's variables. |
| |
| PERLMOD_MAKEVAR_PREFIX = |
| |
| #--------------------------------------------------------------------------- |
| # Configuration options related to the preprocessor |
| #--------------------------------------------------------------------------- |
| |
| # If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will |
| # evaluate all C-preprocessor directives found in the sources and include |
| # files. |
| |
| ENABLE_PREPROCESSING = YES |
| |
| # If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro |
| # names in the source code. If set to NO (the default) only conditional |
| # compilation will be performed. Macro expansion can be done in a controlled |
| # way by setting EXPAND_ONLY_PREDEF to YES. |
| |
| MACRO_EXPANSION = YES |
| |
| # If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES |
| # then the macro expansion is limited to the macros specified with the |
| # PREDEFINED and EXPAND_AS_DEFINED tags. |
| |
| EXPAND_ONLY_PREDEF = NO |
| |
| # If the SEARCH_INCLUDES tag is set to YES (the default) the includes files |
| # in the INCLUDE_PATH (see below) will be search if a #include is found. |
| |
| SEARCH_INCLUDES = YES |
| |
| # The INCLUDE_PATH tag can be used to specify one or more directories that |
| # contain include files that are not input files but should be processed by |
| # the preprocessor. |
| |
| INCLUDE_PATH = |
| |
| # You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard |
| # patterns (like *.h and *.hpp) to filter out the header-files in the |
| # directories. If left blank, the patterns specified with FILE_PATTERNS will |
| # be used. |
| |
| INCLUDE_FILE_PATTERNS = |
| |
| # The PREDEFINED tag can be used to specify one or more macro names that |
| # are defined before the preprocessor is started (similar to the -D option of |
| # gcc). The argument of the tag is a list of macros of the form: name |
| # or name=definition (no spaces). If the definition and the = are |
| # omitted =1 is assumed. To prevent a macro definition from being |
| # undefined via #undef or recursively expanded use the := operator |
| # instead of the = operator. |
| |
| PREDEFINED = INLINE=inline |
| |
| # If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then |
| # this tag can be used to specify a list of macro names that should be expanded. |
| # The macro definition that is found in the sources will be used. |
| # Use the PREDEFINED tag if you want to use a different macro definition. |
| |
| EXPAND_AS_DEFINED = |
| |
| # If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then |
| # doxygen's preprocessor will remove all function-like macros that are alone |
| # on a line, have an all uppercase name, and do not end with a semicolon. Such |
| # function macros are typically used for boiler-plate code, and will confuse |
| # the parser if not removed. |
| |
| SKIP_FUNCTION_MACROS = YES |
| |
| #--------------------------------------------------------------------------- |
| # Configuration::additions related to external references |
| #--------------------------------------------------------------------------- |
| |
| # The TAGFILES option can be used to specify one or more tagfiles. |
| # Optionally an initial location of the external documentation |
| # can be added for each tagfile. The format of a tag file without |
| # this location is as follows: |
| # TAGFILES = file1 file2 ... |
| # Adding location for the tag files is done as follows: |
| # TAGFILES = file1=loc1 "file2 = loc2" ... |
| # where "loc1" and "loc2" can be relative or absolute paths or |
| # URLs. If a location is present for each tag, the installdox tool |
| # does not have to be run to correct the links. |
| # Note that each tag file must have a unique name |
| # (where the name does NOT include the path) |
| # If a tag file is not located in the directory in which doxygen |
| # is run, you must also specify the path to the tagfile here. |
| |
| TAGFILES = \ |
| main.tag=../main \ |
| math.tag=../math \ |
| swrast_setup.tag=../swrast_setup \ |
| swrast.tag=../swrast \ |
| tnl_dd.tag=../tnl_dd \ |
| tnl.tag=../tnl \ |
| vbo.tag=../vbo |
| |
| # When a file name is specified after GENERATE_TAGFILE, doxygen will create |
| # a tag file that is based on the input files it reads. |
| |
| GENERATE_TAGFILE = |
| |
| # If the ALLEXTERNALS tag is set to YES all external classes will be listed |
| # in the class index. If set to NO only the inherited external classes |
| # will be listed. |
| |
| ALLEXTERNALS = NO |
| |
| # If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed |
| # in the modules index. If set to NO, only the current project's groups will |
| # be listed. |
| |
| EXTERNAL_GROUPS = YES |
| |
| # The PERL_PATH should be the absolute path and name of the perl script |
| # interpreter (i.e. the result of `which perl'). |
| |
| PERL_PATH = /usr/bin/perl |
| |
| #--------------------------------------------------------------------------- |
| # Configuration options related to the dot tool |
| #--------------------------------------------------------------------------- |
| |
| # If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will |
| # generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base |
| # or super classes. Setting the tag to NO turns the diagrams off. Note that |
| # this option is superseded by the HAVE_DOT option below. This is only a |
| # fallback. It is recommended to install and use dot, since it yields more |
| # powerful graphs. |
| |
| CLASS_DIAGRAMS = YES |
| |
| # You can define message sequence charts within doxygen comments using the \msc |
| # command. Doxygen will then run the mscgen tool (see http://www.mcternan.me.uk/mscgen/) to |
| # produce the chart and insert it in the documentation. The MSCGEN_PATH tag allows you to |
| # specify the directory where the mscgen tool resides. If left empty the tool is assumed to |
| # be found in the default search path. |
| |
| MSCGEN_PATH = |
| |
| # If set to YES, the inheritance and collaboration graphs will hide |
| # inheritance and usage relations if the target is undocumented |
| # or is not a class. |
| |
| HIDE_UNDOC_RELATIONS = YES |
| |
| # If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is |
| # available from the path. This tool is part of Graphviz, a graph visualization |
| # toolkit from AT&T and Lucent Bell Labs. The other options in this section |
| # have no effect if this option is set to NO (the default) |
| |
| HAVE_DOT = YES |
| |
| # If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen |
| # will generate a graph for each documented class showing the direct and |
| # indirect inheritance relations. Setting this tag to YES will force the |
| # the CLASS_DIAGRAMS tag to NO. |
| |
| CLASS_GRAPH = YES |
| |
| # If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen |
| # will generate a graph for each documented class showing the direct and |
| # indirect implementation dependencies (inheritance, containment, and |
| # class references variables) of the class with other documented classes. |
| |
| COLLABORATION_GRAPH = YES |
| |
| # If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen |
| # will generate a graph for groups, showing the direct groups dependencies |
| |
| GROUP_GRAPHS = YES |
| |
| # If the UML_LOOK tag is set to YES doxygen will generate inheritance and |
| # collaboration diagrams in a style similar to the OMG's Unified Modeling |
| # Language. |
| |
| UML_LOOK = NO |
| |
| # If set to YES, the inheritance and collaboration graphs will show the |
| # relations between templates and their instances. |
| |
| TEMPLATE_RELATIONS = NO |
| |
| # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT |
| # tags are set to YES then doxygen will generate a graph for each documented |
| # file showing the direct and indirect include dependencies of the file with |
| # other documented files. |
| |
| INCLUDE_GRAPH = YES |
| |
| # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and |
| # HAVE_DOT tags are set to YES then doxygen will generate a graph for each |
| # documented header file showing the documented files that directly or |
| # indirectly include this file. |
| |
| INCLUDED_BY_GRAPH = YES |
| |
| # If the CALL_GRAPH, SOURCE_BROWSER and HAVE_DOT tags are set to YES then doxygen will |
| # generate a call dependency graph for every global function or class method. |
| # Note that enabling this option will significantly increase the time of a run. |
| # So in most cases it will be better to enable call graphs for selected |
| # functions only using the \callgraph command. |
| |
| CALL_GRAPH = NO |
| |
| # If the CALLER_GRAPH, SOURCE_BROWSER and HAVE_DOT tags are set to YES then doxygen will |
| # generate a caller dependency graph for every global function or class method. |
| # Note that enabling this option will significantly increase the time of a run. |
| # So in most cases it will be better to enable caller graphs for selected |
| # functions only using the \callergraph command. |
| |
| CALLER_GRAPH = NO |
| |
| # If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen |
| # will graphical hierarchy of all classes instead of a textual one. |
| |
| GRAPHICAL_HIERARCHY = YES |
| |
| # If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES |
| # then doxygen will show the dependencies a directory has on other directories |
| # in a graphical way. The dependency relations are determined by the #include |
| # relations between the files in the directories. |
| |
| DIRECTORY_GRAPH = YES |
| |
| # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images |
| # generated by dot. Possible values are png, jpg, or gif |
| # If left blank png will be used. |
| |
| DOT_IMAGE_FORMAT = png |
| |
| # The tag DOT_PATH can be used to specify the path where the dot tool can be |
| # found. If left blank, it is assumed the dot tool can be found in the path. |
| |
| DOT_PATH = |
| |
| # The DOTFILE_DIRS tag can be used to specify one or more directories that |
| # contain dot files that are included in the documentation (see the |
| # \dotfile command). |
| |
| DOTFILE_DIRS = |
| |
| # The MAX_DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of |
| # nodes that will be shown in the graph. If the number of nodes in a graph |
| # becomes larger than this value, doxygen will truncate the graph, which is |
| # visualized by representing a node as a red box. Note that doxygen if the number |
| # of direct children of the root node in a graph is already larger than |
| # MAX_DOT_GRAPH_NOTES then the graph will not be shown at all. Also note |
| # that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH. |
| |
| DOT_GRAPH_MAX_NODES = 50 |
| |
| # The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the |
| # graphs generated by dot. A depth value of 3 means that only nodes reachable |
| # from the root by following a path via at most 3 edges will be shown. Nodes |
| # that lay further from the root node will be omitted. Note that setting this |
| # option to 1 or 2 may greatly reduce the computation time needed for large |
| # code bases. Also note that the size of a graph can be further restricted by |
| # DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction. |
| |
| MAX_DOT_GRAPH_DEPTH = 0 |
| |
| # Set the DOT_TRANSPARENT tag to YES to generate images with a transparent |
| # background. This is disabled by default, which results in a white background. |
| # Warning: Depending on the platform used, enabling this option may lead to |
| # badly anti-aliased labels on the edges of a graph (i.e. they become hard to |
| # read). |
| |
| DOT_TRANSPARENT = NO |
| |
| # Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output |
| # files in one run (i.e. multiple -o and -T options on the command line). This |
| # makes dot run faster, but since only newer versions of dot (>1.8.10) |
| # support this, this feature is disabled by default. |
| |
| DOT_MULTI_TARGETS = NO |
| |
| # If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will |
| # generate a legend page explaining the meaning of the various boxes and |
| # arrows in the dot generated graphs. |
| |
| GENERATE_LEGEND = YES |
| |
| # If the DOT_CLEANUP tag is set to YES (the default) Doxygen will |
| # remove the intermediate dot files that are used to generate |
| # the various graphs. |
| |
| DOT_CLEANUP = YES |
| |
| #--------------------------------------------------------------------------- |
| # Configuration::additions related to the search engine |
| #--------------------------------------------------------------------------- |
| |
| # The SEARCHENGINE tag specifies whether or not a search engine should be |
| # used. If set to NO the values of all tags below this one will be ignored. |
| |
| SEARCHENGINE = NO |