| /* |
| Copyright (C) Intel Corp. 2006. All Rights Reserved. |
| Intel funded Tungsten Graphics (http://www.tungstengraphics.com) to |
| develop this 3D driver. |
| |
| Permission is hereby granted, free of charge, to any person obtaining |
| a copy of this software and associated documentation files (the |
| "Software"), to deal in the Software without restriction, including |
| without limitation the rights to use, copy, modify, merge, publish, |
| distribute, sublicense, and/or sell copies of the Software, and to |
| permit persons to whom the Software is furnished to do so, subject to |
| the following conditions: |
| |
| The above copyright notice and this permission notice (including the |
| next paragraph) shall be included in all copies or substantial |
| portions of the Software. |
| |
| THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF |
| MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. |
| IN NO EVENT SHALL THE COPYRIGHT OWNER(S) AND/OR ITS SUPPLIERS BE |
| LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION |
| OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION |
| WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. |
| |
| **********************************************************************/ |
| /* |
| * Authors: |
| * Keith Whitwell <keith@tungstengraphics.com> |
| */ |
| |
| |
| #ifndef BRW_EU_H |
| #define BRW_EU_H |
| |
| #include <stdbool.h> |
| #include "brw_structs.h" |
| #include "brw_defines.h" |
| #include "program/prog_instruction.h" |
| |
| #define BRW_SWIZZLE4(a,b,c,d) (((a)<<0) | ((b)<<2) | ((c)<<4) | ((d)<<6)) |
| #define BRW_GET_SWZ(swz, idx) (((swz) >> ((idx)*2)) & 0x3) |
| |
| #define BRW_SWIZZLE_NOOP BRW_SWIZZLE4(0,1,2,3) |
| #define BRW_SWIZZLE_XYZW BRW_SWIZZLE4(0,1,2,3) |
| #define BRW_SWIZZLE_XXXX BRW_SWIZZLE4(0,0,0,0) |
| #define BRW_SWIZZLE_XYXY BRW_SWIZZLE4(0,1,0,1) |
| |
| |
| #define REG_SIZE (8*4) |
| |
| |
| /* These aren't hardware structs, just something useful for us to pass around: |
| * |
| * Align1 operation has a lot of control over input ranges. Used in |
| * WM programs to implement shaders decomposed into "channel serial" |
| * or "structure of array" form: |
| */ |
| struct brw_reg |
| { |
| GLuint type:4; |
| GLuint file:2; |
| GLuint nr:8; |
| GLuint subnr:5; /* :1 in align16 */ |
| GLuint negate:1; /* source only */ |
| GLuint abs:1; /* source only */ |
| GLuint vstride:4; /* source only */ |
| GLuint width:3; /* src only, align1 only */ |
| GLuint hstride:2; /* align1 only */ |
| GLuint address_mode:1; /* relative addressing, hopefully! */ |
| GLuint pad0:1; |
| |
| union { |
| struct { |
| GLuint swizzle:8; /* src only, align16 only */ |
| GLuint writemask:4; /* dest only, align16 only */ |
| GLint indirect_offset:10; /* relative addressing offset */ |
| GLuint pad1:10; /* two dwords total */ |
| } bits; |
| |
| GLfloat f; |
| GLint d; |
| GLuint ud; |
| } dw1; |
| }; |
| |
| |
| struct brw_indirect { |
| GLuint addr_subnr:4; |
| GLint addr_offset:10; |
| GLuint pad:18; |
| }; |
| |
| |
| struct brw_glsl_label; |
| struct brw_glsl_call; |
| |
| |
| |
| #define BRW_EU_MAX_INSN_STACK 5 |
| #define BRW_EU_MAX_INSN 10000 |
| |
| struct brw_compile { |
| struct brw_instruction store[BRW_EU_MAX_INSN]; |
| GLuint nr_insn; |
| |
| void *mem_ctx; |
| |
| /* Allow clients to push/pop instruction state: |
| */ |
| struct brw_instruction stack[BRW_EU_MAX_INSN_STACK]; |
| bool compressed_stack[BRW_EU_MAX_INSN_STACK]; |
| struct brw_instruction *current; |
| |
| GLuint flag_value; |
| GLboolean single_program_flow; |
| bool compressed; |
| struct brw_context *brw; |
| |
| /* Control flow stacks: |
| * - if_stack contains IF and ELSE instructions which must be patched |
| * (and popped) once the matching ENDIF instruction is encountered. |
| */ |
| struct brw_instruction **if_stack; |
| int if_stack_depth; |
| int if_stack_array_size; |
| |
| struct brw_glsl_label *first_label; /**< linked list of labels */ |
| struct brw_glsl_call *first_call; /**< linked list of CALs */ |
| }; |
| |
| |
| void |
| brw_save_label(struct brw_compile *c, const char *name, GLuint position); |
| |
| void |
| brw_save_call(struct brw_compile *c, const char *name, GLuint call_pos); |
| |
| void |
| brw_resolve_cals(struct brw_compile *c); |
| |
| |
| |
| static INLINE int type_sz( GLuint type ) |
| { |
| switch( type ) { |
| case BRW_REGISTER_TYPE_UD: |
| case BRW_REGISTER_TYPE_D: |
| case BRW_REGISTER_TYPE_F: |
| return 4; |
| case BRW_REGISTER_TYPE_HF: |
| case BRW_REGISTER_TYPE_UW: |
| case BRW_REGISTER_TYPE_W: |
| return 2; |
| case BRW_REGISTER_TYPE_UB: |
| case BRW_REGISTER_TYPE_B: |
| return 1; |
| default: |
| return 0; |
| } |
| } |
| |
| /** |
| * Construct a brw_reg. |
| * \param file one of the BRW_x_REGISTER_FILE values |
| * \param nr register number/index |
| * \param subnr register sub number |
| * \param type one of BRW_REGISTER_TYPE_x |
| * \param vstride one of BRW_VERTICAL_STRIDE_x |
| * \param width one of BRW_WIDTH_x |
| * \param hstride one of BRW_HORIZONTAL_STRIDE_x |
| * \param swizzle one of BRW_SWIZZLE_x |
| * \param writemask WRITEMASK_X/Y/Z/W bitfield |
| */ |
| static INLINE struct brw_reg brw_reg( GLuint file, |
| GLuint nr, |
| GLuint subnr, |
| GLuint type, |
| GLuint vstride, |
| GLuint width, |
| GLuint hstride, |
| GLuint swizzle, |
| GLuint writemask ) |
| { |
| struct brw_reg reg; |
| if (file == BRW_GENERAL_REGISTER_FILE) |
| assert(nr < BRW_MAX_GRF); |
| else if (file == BRW_MESSAGE_REGISTER_FILE) |
| assert((nr & ~(1 << 7)) < BRW_MAX_MRF); |
| else if (file == BRW_ARCHITECTURE_REGISTER_FILE) |
| assert(nr <= BRW_ARF_IP); |
| |
| reg.type = type; |
| reg.file = file; |
| reg.nr = nr; |
| reg.subnr = subnr * type_sz(type); |
| reg.negate = 0; |
| reg.abs = 0; |
| reg.vstride = vstride; |
| reg.width = width; |
| reg.hstride = hstride; |
| reg.address_mode = BRW_ADDRESS_DIRECT; |
| reg.pad0 = 0; |
| |
| /* Could do better: If the reg is r5.3<0;1,0>, we probably want to |
| * set swizzle and writemask to W, as the lower bits of subnr will |
| * be lost when converted to align16. This is probably too much to |
| * keep track of as you'd want it adjusted by suboffset(), etc. |
| * Perhaps fix up when converting to align16? |
| */ |
| reg.dw1.bits.swizzle = swizzle; |
| reg.dw1.bits.writemask = writemask; |
| reg.dw1.bits.indirect_offset = 0; |
| reg.dw1.bits.pad1 = 0; |
| return reg; |
| } |
| |
| /** Construct float[16] register */ |
| static INLINE struct brw_reg brw_vec16_reg( GLuint file, |
| GLuint nr, |
| GLuint subnr ) |
| { |
| return brw_reg(file, |
| nr, |
| subnr, |
| BRW_REGISTER_TYPE_F, |
| BRW_VERTICAL_STRIDE_16, |
| BRW_WIDTH_16, |
| BRW_HORIZONTAL_STRIDE_1, |
| BRW_SWIZZLE_XYZW, |
| WRITEMASK_XYZW); |
| } |
| |
| /** Construct float[8] register */ |
| static INLINE struct brw_reg brw_vec8_reg( GLuint file, |
| GLuint nr, |
| GLuint subnr ) |
| { |
| return brw_reg(file, |
| nr, |
| subnr, |
| BRW_REGISTER_TYPE_F, |
| BRW_VERTICAL_STRIDE_8, |
| BRW_WIDTH_8, |
| BRW_HORIZONTAL_STRIDE_1, |
| BRW_SWIZZLE_XYZW, |
| WRITEMASK_XYZW); |
| } |
| |
| /** Construct float[4] register */ |
| static INLINE struct brw_reg brw_vec4_reg( GLuint file, |
| GLuint nr, |
| GLuint subnr ) |
| { |
| return brw_reg(file, |
| nr, |
| subnr, |
| BRW_REGISTER_TYPE_F, |
| BRW_VERTICAL_STRIDE_4, |
| BRW_WIDTH_4, |
| BRW_HORIZONTAL_STRIDE_1, |
| BRW_SWIZZLE_XYZW, |
| WRITEMASK_XYZW); |
| } |
| |
| /** Construct float[2] register */ |
| static INLINE struct brw_reg brw_vec2_reg( GLuint file, |
| GLuint nr, |
| GLuint subnr ) |
| { |
| return brw_reg(file, |
| nr, |
| subnr, |
| BRW_REGISTER_TYPE_F, |
| BRW_VERTICAL_STRIDE_2, |
| BRW_WIDTH_2, |
| BRW_HORIZONTAL_STRIDE_1, |
| BRW_SWIZZLE_XYXY, |
| WRITEMASK_XY); |
| } |
| |
| /** Construct float[1] register */ |
| static INLINE struct brw_reg brw_vec1_reg( GLuint file, |
| GLuint nr, |
| GLuint subnr ) |
| { |
| return brw_reg(file, |
| nr, |
| subnr, |
| BRW_REGISTER_TYPE_F, |
| BRW_VERTICAL_STRIDE_0, |
| BRW_WIDTH_1, |
| BRW_HORIZONTAL_STRIDE_0, |
| BRW_SWIZZLE_XXXX, |
| WRITEMASK_X); |
| } |
| |
| |
| static INLINE struct brw_reg retype( struct brw_reg reg, |
| GLuint type ) |
| { |
| reg.type = type; |
| return reg; |
| } |
| |
| static inline struct brw_reg |
| sechalf(struct brw_reg reg) |
| { |
| if (reg.vstride) |
| reg.nr++; |
| return reg; |
| } |
| |
| static INLINE struct brw_reg suboffset( struct brw_reg reg, |
| GLuint delta ) |
| { |
| reg.subnr += delta * type_sz(reg.type); |
| return reg; |
| } |
| |
| |
| static INLINE struct brw_reg offset( struct brw_reg reg, |
| GLuint delta ) |
| { |
| reg.nr += delta; |
| return reg; |
| } |
| |
| |
| static INLINE struct brw_reg byte_offset( struct brw_reg reg, |
| GLuint bytes ) |
| { |
| GLuint newoffset = reg.nr * REG_SIZE + reg.subnr + bytes; |
| reg.nr = newoffset / REG_SIZE; |
| reg.subnr = newoffset % REG_SIZE; |
| return reg; |
| } |
| |
| |
| /** Construct unsigned word[16] register */ |
| static INLINE struct brw_reg brw_uw16_reg( GLuint file, |
| GLuint nr, |
| GLuint subnr ) |
| { |
| return suboffset(retype(brw_vec16_reg(file, nr, 0), BRW_REGISTER_TYPE_UW), subnr); |
| } |
| |
| /** Construct unsigned word[8] register */ |
| static INLINE struct brw_reg brw_uw8_reg( GLuint file, |
| GLuint nr, |
| GLuint subnr ) |
| { |
| return suboffset(retype(brw_vec8_reg(file, nr, 0), BRW_REGISTER_TYPE_UW), subnr); |
| } |
| |
| /** Construct unsigned word[1] register */ |
| static INLINE struct brw_reg brw_uw1_reg( GLuint file, |
| GLuint nr, |
| GLuint subnr ) |
| { |
| return suboffset(retype(brw_vec1_reg(file, nr, 0), BRW_REGISTER_TYPE_UW), subnr); |
| } |
| |
| static INLINE struct brw_reg brw_imm_reg( GLuint type ) |
| { |
| return brw_reg( BRW_IMMEDIATE_VALUE, |
| 0, |
| 0, |
| type, |
| BRW_VERTICAL_STRIDE_0, |
| BRW_WIDTH_1, |
| BRW_HORIZONTAL_STRIDE_0, |
| 0, |
| 0); |
| } |
| |
| /** Construct float immediate register */ |
| static INLINE struct brw_reg brw_imm_f( GLfloat f ) |
| { |
| struct brw_reg imm = brw_imm_reg(BRW_REGISTER_TYPE_F); |
| imm.dw1.f = f; |
| return imm; |
| } |
| |
| /** Construct integer immediate register */ |
| static INLINE struct brw_reg brw_imm_d( GLint d ) |
| { |
| struct brw_reg imm = brw_imm_reg(BRW_REGISTER_TYPE_D); |
| imm.dw1.d = d; |
| return imm; |
| } |
| |
| /** Construct uint immediate register */ |
| static INLINE struct brw_reg brw_imm_ud( GLuint ud ) |
| { |
| struct brw_reg imm = brw_imm_reg(BRW_REGISTER_TYPE_UD); |
| imm.dw1.ud = ud; |
| return imm; |
| } |
| |
| /** Construct ushort immediate register */ |
| static INLINE struct brw_reg brw_imm_uw( GLushort uw ) |
| { |
| struct brw_reg imm = brw_imm_reg(BRW_REGISTER_TYPE_UW); |
| imm.dw1.ud = uw | (uw << 16); |
| return imm; |
| } |
| |
| /** Construct short immediate register */ |
| static INLINE struct brw_reg brw_imm_w( GLshort w ) |
| { |
| struct brw_reg imm = brw_imm_reg(BRW_REGISTER_TYPE_W); |
| imm.dw1.d = w | (w << 16); |
| return imm; |
| } |
| |
| /* brw_imm_b and brw_imm_ub aren't supported by hardware - the type |
| * numbers alias with _V and _VF below: |
| */ |
| |
| /** Construct vector of eight signed half-byte values */ |
| static INLINE struct brw_reg brw_imm_v( GLuint v ) |
| { |
| struct brw_reg imm = brw_imm_reg(BRW_REGISTER_TYPE_V); |
| imm.vstride = BRW_VERTICAL_STRIDE_0; |
| imm.width = BRW_WIDTH_8; |
| imm.hstride = BRW_HORIZONTAL_STRIDE_1; |
| imm.dw1.ud = v; |
| return imm; |
| } |
| |
| /** Construct vector of four 8-bit float values */ |
| static INLINE struct brw_reg brw_imm_vf( GLuint v ) |
| { |
| struct brw_reg imm = brw_imm_reg(BRW_REGISTER_TYPE_VF); |
| imm.vstride = BRW_VERTICAL_STRIDE_0; |
| imm.width = BRW_WIDTH_4; |
| imm.hstride = BRW_HORIZONTAL_STRIDE_1; |
| imm.dw1.ud = v; |
| return imm; |
| } |
| |
| #define VF_ZERO 0x0 |
| #define VF_ONE 0x30 |
| #define VF_NEG (1<<7) |
| |
| static INLINE struct brw_reg brw_imm_vf4( GLuint v0, |
| GLuint v1, |
| GLuint v2, |
| GLuint v3) |
| { |
| struct brw_reg imm = brw_imm_reg(BRW_REGISTER_TYPE_VF); |
| imm.vstride = BRW_VERTICAL_STRIDE_0; |
| imm.width = BRW_WIDTH_4; |
| imm.hstride = BRW_HORIZONTAL_STRIDE_1; |
| imm.dw1.ud = ((v0 << 0) | |
| (v1 << 8) | |
| (v2 << 16) | |
| (v3 << 24)); |
| return imm; |
| } |
| |
| |
| static INLINE struct brw_reg brw_address( struct brw_reg reg ) |
| { |
| return brw_imm_uw(reg.nr * REG_SIZE + reg.subnr); |
| } |
| |
| /** Construct float[1] general-purpose register */ |
| static INLINE struct brw_reg brw_vec1_grf( GLuint nr, GLuint subnr ) |
| { |
| return brw_vec1_reg(BRW_GENERAL_REGISTER_FILE, nr, subnr); |
| } |
| |
| /** Construct float[2] general-purpose register */ |
| static INLINE struct brw_reg brw_vec2_grf( GLuint nr, GLuint subnr ) |
| { |
| return brw_vec2_reg(BRW_GENERAL_REGISTER_FILE, nr, subnr); |
| } |
| |
| /** Construct float[4] general-purpose register */ |
| static INLINE struct brw_reg brw_vec4_grf( GLuint nr, GLuint subnr ) |
| { |
| return brw_vec4_reg(BRW_GENERAL_REGISTER_FILE, nr, subnr); |
| } |
| |
| /** Construct float[8] general-purpose register */ |
| static INLINE struct brw_reg brw_vec8_grf( GLuint nr, GLuint subnr ) |
| { |
| return brw_vec8_reg(BRW_GENERAL_REGISTER_FILE, nr, subnr); |
| } |
| |
| |
| static INLINE struct brw_reg brw_uw8_grf( GLuint nr, GLuint subnr ) |
| { |
| return brw_uw8_reg(BRW_GENERAL_REGISTER_FILE, nr, subnr); |
| } |
| |
| static INLINE struct brw_reg brw_uw16_grf( GLuint nr, GLuint subnr ) |
| { |
| return brw_uw16_reg(BRW_GENERAL_REGISTER_FILE, nr, subnr); |
| } |
| |
| |
| /** Construct null register (usually used for setting condition codes) */ |
| static INLINE struct brw_reg brw_null_reg( void ) |
| { |
| return brw_vec8_reg(BRW_ARCHITECTURE_REGISTER_FILE, |
| BRW_ARF_NULL, |
| 0); |
| } |
| |
| static INLINE struct brw_reg brw_address_reg( GLuint subnr ) |
| { |
| return brw_uw1_reg(BRW_ARCHITECTURE_REGISTER_FILE, |
| BRW_ARF_ADDRESS, |
| subnr); |
| } |
| |
| /* If/else instructions break in align16 mode if writemask & swizzle |
| * aren't xyzw. This goes against the convention for other scalar |
| * regs: |
| */ |
| static INLINE struct brw_reg brw_ip_reg( void ) |
| { |
| return brw_reg(BRW_ARCHITECTURE_REGISTER_FILE, |
| BRW_ARF_IP, |
| 0, |
| BRW_REGISTER_TYPE_UD, |
| BRW_VERTICAL_STRIDE_4, /* ? */ |
| BRW_WIDTH_1, |
| BRW_HORIZONTAL_STRIDE_0, |
| BRW_SWIZZLE_XYZW, /* NOTE! */ |
| WRITEMASK_XYZW); /* NOTE! */ |
| } |
| |
| static INLINE struct brw_reg brw_acc_reg( void ) |
| { |
| return brw_vec8_reg(BRW_ARCHITECTURE_REGISTER_FILE, |
| BRW_ARF_ACCUMULATOR, |
| 0); |
| } |
| |
| static INLINE struct brw_reg brw_notification_1_reg(void) |
| { |
| |
| return brw_reg(BRW_ARCHITECTURE_REGISTER_FILE, |
| BRW_ARF_NOTIFICATION_COUNT, |
| 1, |
| BRW_REGISTER_TYPE_UD, |
| BRW_VERTICAL_STRIDE_0, |
| BRW_WIDTH_1, |
| BRW_HORIZONTAL_STRIDE_0, |
| BRW_SWIZZLE_XXXX, |
| WRITEMASK_X); |
| } |
| |
| |
| static INLINE struct brw_reg brw_flag_reg( void ) |
| { |
| return brw_uw1_reg(BRW_ARCHITECTURE_REGISTER_FILE, |
| BRW_ARF_FLAG, |
| 0); |
| } |
| |
| |
| static INLINE struct brw_reg brw_mask_reg( GLuint subnr ) |
| { |
| return brw_uw1_reg(BRW_ARCHITECTURE_REGISTER_FILE, |
| BRW_ARF_MASK, |
| subnr); |
| } |
| |
| static INLINE struct brw_reg brw_message_reg( GLuint nr ) |
| { |
| assert((nr & ~(1 << 7)) < BRW_MAX_MRF); |
| return brw_vec8_reg(BRW_MESSAGE_REGISTER_FILE, |
| nr, |
| 0); |
| } |
| |
| |
| |
| |
| /* This is almost always called with a numeric constant argument, so |
| * make things easy to evaluate at compile time: |
| */ |
| static INLINE GLuint cvt( GLuint val ) |
| { |
| switch (val) { |
| case 0: return 0; |
| case 1: return 1; |
| case 2: return 2; |
| case 4: return 3; |
| case 8: return 4; |
| case 16: return 5; |
| case 32: return 6; |
| } |
| return 0; |
| } |
| |
| static INLINE struct brw_reg stride( struct brw_reg reg, |
| GLuint vstride, |
| GLuint width, |
| GLuint hstride ) |
| { |
| reg.vstride = cvt(vstride); |
| reg.width = cvt(width) - 1; |
| reg.hstride = cvt(hstride); |
| return reg; |
| } |
| |
| |
| static INLINE struct brw_reg vec16( struct brw_reg reg ) |
| { |
| return stride(reg, 16,16,1); |
| } |
| |
| static INLINE struct brw_reg vec8( struct brw_reg reg ) |
| { |
| return stride(reg, 8,8,1); |
| } |
| |
| static INLINE struct brw_reg vec4( struct brw_reg reg ) |
| { |
| return stride(reg, 4,4,1); |
| } |
| |
| static INLINE struct brw_reg vec2( struct brw_reg reg ) |
| { |
| return stride(reg, 2,2,1); |
| } |
| |
| static INLINE struct brw_reg vec1( struct brw_reg reg ) |
| { |
| return stride(reg, 0,1,0); |
| } |
| |
| |
| static INLINE struct brw_reg get_element( struct brw_reg reg, GLuint elt ) |
| { |
| return vec1(suboffset(reg, elt)); |
| } |
| |
| static INLINE struct brw_reg get_element_ud( struct brw_reg reg, GLuint elt ) |
| { |
| return vec1(suboffset(retype(reg, BRW_REGISTER_TYPE_UD), elt)); |
| } |
| |
| |
| static INLINE struct brw_reg brw_swizzle( struct brw_reg reg, |
| GLuint x, |
| GLuint y, |
| GLuint z, |
| GLuint w) |
| { |
| assert(reg.file != BRW_IMMEDIATE_VALUE); |
| |
| reg.dw1.bits.swizzle = BRW_SWIZZLE4(BRW_GET_SWZ(reg.dw1.bits.swizzle, x), |
| BRW_GET_SWZ(reg.dw1.bits.swizzle, y), |
| BRW_GET_SWZ(reg.dw1.bits.swizzle, z), |
| BRW_GET_SWZ(reg.dw1.bits.swizzle, w)); |
| return reg; |
| } |
| |
| |
| static INLINE struct brw_reg brw_swizzle1( struct brw_reg reg, |
| GLuint x ) |
| { |
| return brw_swizzle(reg, x, x, x, x); |
| } |
| |
| static INLINE struct brw_reg brw_writemask( struct brw_reg reg, |
| GLuint mask ) |
| { |
| assert(reg.file != BRW_IMMEDIATE_VALUE); |
| reg.dw1.bits.writemask &= mask; |
| return reg; |
| } |
| |
| static INLINE struct brw_reg brw_set_writemask( struct brw_reg reg, |
| GLuint mask ) |
| { |
| assert(reg.file != BRW_IMMEDIATE_VALUE); |
| reg.dw1.bits.writemask = mask; |
| return reg; |
| } |
| |
| static INLINE struct brw_reg negate( struct brw_reg reg ) |
| { |
| reg.negate ^= 1; |
| return reg; |
| } |
| |
| static INLINE struct brw_reg brw_abs( struct brw_reg reg ) |
| { |
| reg.abs = 1; |
| return reg; |
| } |
| |
| /*********************************************************************** |
| */ |
| static INLINE struct brw_reg brw_vec4_indirect( GLuint subnr, |
| GLint offset ) |
| { |
| struct brw_reg reg = brw_vec4_grf(0, 0); |
| reg.subnr = subnr; |
| reg.address_mode = BRW_ADDRESS_REGISTER_INDIRECT_REGISTER; |
| reg.dw1.bits.indirect_offset = offset; |
| return reg; |
| } |
| |
| static INLINE struct brw_reg brw_vec1_indirect( GLuint subnr, |
| GLint offset ) |
| { |
| struct brw_reg reg = brw_vec1_grf(0, 0); |
| reg.subnr = subnr; |
| reg.address_mode = BRW_ADDRESS_REGISTER_INDIRECT_REGISTER; |
| reg.dw1.bits.indirect_offset = offset; |
| return reg; |
| } |
| |
| static INLINE struct brw_reg deref_4f(struct brw_indirect ptr, GLint offset) |
| { |
| return brw_vec4_indirect(ptr.addr_subnr, ptr.addr_offset + offset); |
| } |
| |
| static INLINE struct brw_reg deref_1f(struct brw_indirect ptr, GLint offset) |
| { |
| return brw_vec1_indirect(ptr.addr_subnr, ptr.addr_offset + offset); |
| } |
| |
| static INLINE struct brw_reg deref_4b(struct brw_indirect ptr, GLint offset) |
| { |
| return retype(deref_4f(ptr, offset), BRW_REGISTER_TYPE_B); |
| } |
| |
| static INLINE struct brw_reg deref_1uw(struct brw_indirect ptr, GLint offset) |
| { |
| return retype(deref_1f(ptr, offset), BRW_REGISTER_TYPE_UW); |
| } |
| |
| static INLINE struct brw_reg deref_1d(struct brw_indirect ptr, GLint offset) |
| { |
| return retype(deref_1f(ptr, offset), BRW_REGISTER_TYPE_D); |
| } |
| |
| static INLINE struct brw_reg deref_1ud(struct brw_indirect ptr, GLint offset) |
| { |
| return retype(deref_1f(ptr, offset), BRW_REGISTER_TYPE_UD); |
| } |
| |
| static INLINE struct brw_reg get_addr_reg(struct brw_indirect ptr) |
| { |
| return brw_address_reg(ptr.addr_subnr); |
| } |
| |
| static INLINE struct brw_indirect brw_indirect_offset( struct brw_indirect ptr, GLint offset ) |
| { |
| ptr.addr_offset += offset; |
| return ptr; |
| } |
| |
| static INLINE struct brw_indirect brw_indirect( GLuint addr_subnr, GLint offset ) |
| { |
| struct brw_indirect ptr; |
| ptr.addr_subnr = addr_subnr; |
| ptr.addr_offset = offset; |
| ptr.pad = 0; |
| return ptr; |
| } |
| |
| /** Do two brw_regs refer to the same register? */ |
| static INLINE GLboolean |
| brw_same_reg(struct brw_reg r1, struct brw_reg r2) |
| { |
| return r1.file == r2.file && r1.nr == r2.nr; |
| } |
| |
| static INLINE struct brw_instruction *current_insn( struct brw_compile *p) |
| { |
| return &p->store[p->nr_insn]; |
| } |
| |
| void brw_pop_insn_state( struct brw_compile *p ); |
| void brw_push_insn_state( struct brw_compile *p ); |
| void brw_set_mask_control( struct brw_compile *p, GLuint value ); |
| void brw_set_saturate( struct brw_compile *p, GLuint value ); |
| void brw_set_access_mode( struct brw_compile *p, GLuint access_mode ); |
| void brw_set_compression_control( struct brw_compile *p, GLboolean control ); |
| void brw_set_predicate_control_flag_value( struct brw_compile *p, GLuint value ); |
| void brw_set_predicate_control( struct brw_compile *p, GLuint pc ); |
| void brw_set_predicate_inverse(struct brw_compile *p, bool predicate_inverse); |
| void brw_set_conditionalmod( struct brw_compile *p, GLuint conditional ); |
| void brw_set_acc_write_control(struct brw_compile *p, GLuint value); |
| |
| void brw_init_compile(struct brw_context *, struct brw_compile *p, |
| void *mem_ctx); |
| const GLuint *brw_get_program( struct brw_compile *p, GLuint *sz ); |
| |
| |
| /* Helpers for regular instructions: |
| */ |
| #define ALU1(OP) \ |
| struct brw_instruction *brw_##OP(struct brw_compile *p, \ |
| struct brw_reg dest, \ |
| struct brw_reg src0); |
| |
| #define ALU2(OP) \ |
| struct brw_instruction *brw_##OP(struct brw_compile *p, \ |
| struct brw_reg dest, \ |
| struct brw_reg src0, \ |
| struct brw_reg src1); |
| |
| #define ROUND(OP) \ |
| void brw_##OP(struct brw_compile *p, struct brw_reg dest, struct brw_reg src0); |
| |
| |
| ALU1(MOV) |
| ALU2(SEL) |
| ALU1(NOT) |
| ALU2(AND) |
| ALU2(OR) |
| ALU2(XOR) |
| ALU2(SHR) |
| ALU2(SHL) |
| ALU2(RSR) |
| ALU2(RSL) |
| ALU2(ASR) |
| ALU2(JMPI) |
| ALU2(ADD) |
| ALU2(MUL) |
| ALU1(FRC) |
| ALU1(RNDD) |
| ALU2(MAC) |
| ALU2(MACH) |
| ALU1(LZD) |
| ALU2(DP4) |
| ALU2(DPH) |
| ALU2(DP3) |
| ALU2(DP2) |
| ALU2(LINE) |
| ALU2(PLN) |
| |
| ROUND(RNDZ) |
| ROUND(RNDE) |
| |
| #undef ALU1 |
| #undef ALU2 |
| #undef ROUND |
| |
| |
| /* Helpers for SEND instruction: |
| */ |
| void brw_urb_WRITE(struct brw_compile *p, |
| struct brw_reg dest, |
| GLuint msg_reg_nr, |
| struct brw_reg src0, |
| GLboolean allocate, |
| GLboolean used, |
| GLuint msg_length, |
| GLuint response_length, |
| GLboolean eot, |
| GLboolean writes_complete, |
| GLuint offset, |
| GLuint swizzle); |
| |
| void brw_ff_sync(struct brw_compile *p, |
| struct brw_reg dest, |
| GLuint msg_reg_nr, |
| struct brw_reg src0, |
| GLboolean allocate, |
| GLuint response_length, |
| GLboolean eot); |
| |
| void brw_fb_WRITE(struct brw_compile *p, |
| int dispatch_width, |
| GLuint msg_reg_nr, |
| struct brw_reg src0, |
| GLuint binding_table_index, |
| GLuint msg_length, |
| GLuint response_length, |
| GLboolean eot, |
| GLboolean header_present); |
| |
| void brw_SAMPLE(struct brw_compile *p, |
| struct brw_reg dest, |
| GLuint msg_reg_nr, |
| struct brw_reg src0, |
| GLuint binding_table_index, |
| GLuint sampler, |
| GLuint writemask, |
| GLuint msg_type, |
| GLuint response_length, |
| GLuint msg_length, |
| GLboolean eot, |
| GLuint header_present, |
| GLuint simd_mode); |
| |
| void brw_math_16( struct brw_compile *p, |
| struct brw_reg dest, |
| GLuint function, |
| GLuint saturate, |
| GLuint msg_reg_nr, |
| struct brw_reg src, |
| GLuint precision ); |
| |
| void brw_math( struct brw_compile *p, |
| struct brw_reg dest, |
| GLuint function, |
| GLuint saturate, |
| GLuint msg_reg_nr, |
| struct brw_reg src, |
| GLuint data_type, |
| GLuint precision ); |
| |
| void brw_math2(struct brw_compile *p, |
| struct brw_reg dest, |
| GLuint function, |
| struct brw_reg src0, |
| struct brw_reg src1); |
| |
| void brw_oword_block_read(struct brw_compile *p, |
| struct brw_reg dest, |
| struct brw_reg mrf, |
| uint32_t offset, |
| uint32_t bind_table_index); |
| |
| void brw_oword_block_read_scratch(struct brw_compile *p, |
| struct brw_reg dest, |
| struct brw_reg mrf, |
| int num_regs, |
| GLuint offset); |
| |
| void brw_oword_block_write_scratch(struct brw_compile *p, |
| struct brw_reg mrf, |
| int num_regs, |
| GLuint offset); |
| |
| void brw_dword_scattered_read(struct brw_compile *p, |
| struct brw_reg dest, |
| struct brw_reg mrf, |
| uint32_t bind_table_index); |
| |
| void brw_dp_READ_4_vs( struct brw_compile *p, |
| struct brw_reg dest, |
| GLuint location, |
| GLuint bind_table_index ); |
| |
| void brw_dp_READ_4_vs_relative(struct brw_compile *p, |
| struct brw_reg dest, |
| struct brw_reg addrReg, |
| GLuint offset, |
| GLuint bind_table_index); |
| |
| /* If/else/endif. Works by manipulating the execution flags on each |
| * channel. |
| */ |
| struct brw_instruction *brw_IF(struct brw_compile *p, |
| GLuint execute_size); |
| struct brw_instruction *gen6_IF(struct brw_compile *p, uint32_t conditional, |
| struct brw_reg src0, struct brw_reg src1); |
| |
| void brw_ELSE(struct brw_compile *p); |
| void brw_ENDIF(struct brw_compile *p); |
| |
| /* DO/WHILE loops: |
| */ |
| struct brw_instruction *brw_DO(struct brw_compile *p, |
| GLuint execute_size); |
| |
| struct brw_instruction *brw_WHILE(struct brw_compile *p, |
| struct brw_instruction *patch_insn); |
| |
| struct brw_instruction *brw_BREAK(struct brw_compile *p, int pop_count); |
| struct brw_instruction *brw_CONT(struct brw_compile *p, int pop_count); |
| struct brw_instruction *gen6_CONT(struct brw_compile *p, |
| struct brw_instruction *do_insn); |
| /* Forward jumps: |
| */ |
| void brw_land_fwd_jump(struct brw_compile *p, |
| struct brw_instruction *jmp_insn); |
| |
| |
| |
| void brw_NOP(struct brw_compile *p); |
| |
| void brw_WAIT(struct brw_compile *p); |
| |
| /* Special case: there is never a destination, execution size will be |
| * taken from src0: |
| */ |
| void brw_CMP(struct brw_compile *p, |
| struct brw_reg dest, |
| GLuint conditional, |
| struct brw_reg src0, |
| struct brw_reg src1); |
| |
| void brw_print_reg( struct brw_reg reg ); |
| |
| |
| /*********************************************************************** |
| * brw_eu_util.c: |
| */ |
| |
| void brw_copy_indirect_to_indirect(struct brw_compile *p, |
| struct brw_indirect dst_ptr, |
| struct brw_indirect src_ptr, |
| GLuint count); |
| |
| void brw_copy_from_indirect(struct brw_compile *p, |
| struct brw_reg dst, |
| struct brw_indirect ptr, |
| GLuint count); |
| |
| void brw_copy4(struct brw_compile *p, |
| struct brw_reg dst, |
| struct brw_reg src, |
| GLuint count); |
| |
| void brw_copy8(struct brw_compile *p, |
| struct brw_reg dst, |
| struct brw_reg src, |
| GLuint count); |
| |
| void brw_math_invert( struct brw_compile *p, |
| struct brw_reg dst, |
| struct brw_reg src); |
| |
| void brw_set_src1(struct brw_compile *p, |
| struct brw_instruction *insn, |
| struct brw_reg reg); |
| |
| void brw_set_uip_jip(struct brw_compile *p); |
| |
| uint32_t brw_swap_cmod(uint32_t cmod); |
| |
| /* brw_optimize.c */ |
| void brw_optimize(struct brw_compile *p); |
| void brw_remove_duplicate_mrf_moves(struct brw_compile *p); |
| void brw_remove_grf_to_mrf_moves(struct brw_compile *p); |
| |
| #endif |