| # |
| # Copyright (c) 2012, Oracle and/or its affiliates. All rights reserved. |
| # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. |
| # |
| # This code is free software; you can redistribute it and/or modify it |
| # under the terms of the GNU General Public License version 2 only, as |
| # published by the Free Software Foundation. Oracle designates this |
| # particular file as subject to the "Classpath" exception as provided |
| # by Oracle in the LICENSE file that accompanied this code. |
| # |
| # This code is distributed in the hope that it will be useful, but WITHOUT |
| # ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| # FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| # version 2 for more details (a copy is included in the LICENSE file that |
| # accompanied this code). |
| # |
| # You should have received a copy of the GNU General Public License version |
| # 2 along with this work; if not, write to the Free Software Foundation, |
| # Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. |
| # |
| # Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA |
| # or visit www.oracle.com if you need additional information or have any |
| # questions. |
| # |
| |
| # This file is responsible for extracting the x11 native struct offsets to |
| # the xawt Java library. The tool needs to be run on the os/arch that |
| # will host the final jvm, thus the tool cannot be used when cross compiling. |
| |
| # To enable cross compiling, the two versions of the generated offset file, |
| # sizes.32 and sizes.64 are committed into the source code repository. |
| # These are the ones used. |
| |
| # However when not cross compiling, the offset generator tool is built and |
| # run, to verify that it still generates the same sizes.32 and sizes.64. |
| |
| GENSRC_X11WRAPPERS := |
| # Put temporary c-code and executable to calculate offsets here. |
| # Also put verification offset file here as well. |
| GENSRC_X11WRAPPERS_TMP := $(JDK_OUTPUTDIR)/gensrc_x11wrappers |
| # Put the generated Java classes used to interface X11 from awt here. |
| GENSRC_X11WRAPPERS_DST := $(JDK_OUTPUTDIR)/gensrc/sun/awt/X11 |
| |
| # The pre-calculated offset file are stored here: |
| GENSRC_SIZER_DIR := $(JDK_TOPDIR)/src/solaris/classes/sun/awt/X11/generator |
| |
| # Normal case is to generate only according to target bits |
| GENSRC_X11_VERSION := $(OPENJDK_TARGET_CPU_BITS) |
| ifeq ($(OPENJDK_TARGET_CPU_BITS), 64) |
| ifneq ($(OPENJDK_TARGET_OS), linux) |
| # On all 64-bit systems except Linux, generate both 32 and 64 bit versions |
| GENSRC_X11_VERSION := 32 64 |
| endif |
| else |
| ifeq ($(OPENJDK_TARGET_OS), solaris) |
| # As a special case, solaris 32-bit also generates the 64-bit version |
| GENSRC_X11_VERSION := 32 64 |
| endif |
| endif |
| |
| GENSRC_X11_SIZES_USED := $(addprefix $(GENSRC_X11WRAPPERS_TMP)/sizes.,$(GENSRC_X11_VERSION)) |
| |
| # Copy only the sizes.* files that are actually needed. WrapperGenerator picks up any it finds from the |
| # file prefix it is given so those not needed need to be hidden. |
| $(GENSRC_X11WRAPPERS_TMP)/sizes.%: $(GENSRC_SIZER_DIR)/sizes.% |
| $(MKDIR) -p $(@D) |
| $(RM) '$@' |
| $(SORT) $< > $@ |
| |
| # Run the tool on the offset files copied from the source repository to generate several Java classes |
| # used in awt. |
| $(JDK_OUTPUTDIR)/gensrc/_the.generated.x11 : $(GENSRC_X11_SIZES_USED) $(BUILD_TOOLS) |
| $(MKDIR) -p $(GENSRC_X11WRAPPERS_DST) |
| $(TOOL_WRAPPERGENERATOR) $(GENSRC_X11WRAPPERS_DST) $(GENSRC_SIZER_DIR)/xlibtypes.txt "gen" $(GENSRC_X11WRAPPERS_TMP)/sizes |
| $(TOUCH) $@ |
| |
| GENSRC_X11WRAPPERS += $(JDK_OUTPUTDIR)/gensrc/_the.generated.x11 |
| |
| ifneq ($(COMPILE_TYPE),cross) |
| # This is not a cross compile, regenerate the offset file, so that we |
| # can compare it with the version in the source code repository. |
| |
| # Generate the C code for the program that will output the offset file. |
| $(GENSRC_X11WRAPPERS_TMP)/sizer.%.c : $(GENSRC_SIZER_DIR)/xlibtypes.txt $(BUILD_TOOLS) |
| $(ECHO) "Generating X11 wrapper ($*-bit version)" |
| $(MKDIR) -p $(@D) |
| $(TOOL_WRAPPERGENERATOR) $(@D) $(GENSRC_SIZER_DIR)/xlibtypes.txt "sizer" $* |
| |
| # use -m32/-m64 only if the compiler supports it |
| ifeq ($(COMPILER_SUPPORTS_TARGET_BITS_FLAG),true) |
| MEMORY_MODEL_FLAG="-m$*" |
| endif |
| |
| # Compile the C code into an executable. |
| $(GENSRC_X11WRAPPERS_TMP)/sizer.%.exe : $(GENSRC_X11WRAPPERS_TMP)/sizer.%.c |
| $(MKDIR) -p $(@D) |
| (cd $(@D) && $(CC) $(MEMORY_MODEL_FLAG) -o $@ $< \ |
| $(X_CFLAGS) \ |
| $(X_LIBS) \ |
| -I$(JDK_OUTPUTDIR)/include \ |
| -I$(JDK_TOPDIR)/src/share/javavm/export \ |
| -I$(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/javavm/export \ |
| -I$(JDK_TOPDIR)/src/share/native/common \ |
| -I$(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/native/common \ |
| -I$(JDK_TOPDIR)/src/solaris/native/sun/awt \ |
| -I$(JDK_TOPDIR)/src/share/native/sun/awt/debug \ |
| -I$(JDK_TOPDIR)/src/share/native/sun/awt/image/cvutils -lc) |
| |
| .PRECIOUS: $(GENSRC_X11WRAPPERS_TMP)/sizer.%.exe $(GENSRC_X11WRAPPERS_TMP)/sizer.%.c |
| |
| # Run the executable create the offset file and check that it is identical |
| # to the offset file in the source code repository. |
| $(GENSRC_X11WRAPPERS_TMP)/sizes.%.verification : $(GENSRC_X11WRAPPERS_TMP)/sizer.%.exe |
| $(MKDIR) -p $(@D) |
| $(GENSRC_X11WRAPPERS_TMP)/sizer.$*.exe | $(SORT) > $@.tmp |
| $(ECHO) Verifying $(GENSRC_X11WRAPPERS_TMP)/sizes.$*.verification.tmp to $(GENSRC_X11WRAPPERS_TMP)/sizes.$* |
| $(DIFF) $(GENSRC_X11WRAPPERS_TMP)/sizes.$*.verification.tmp $(GENSRC_X11WRAPPERS_TMP)/sizes.$* |
| mv $@.tmp $@ |
| |
| GENSRC_X11WRAPPERS += $(GENSRC_X11WRAPPERS_TMP)/sizes.$(OPENJDK_TARGET_CPU_BITS).verification |
| endif |
| |