makefiles/sun/security/ec/Makefile - platform/external/oj-libjdwp - Gitiles

 #
 # Copyright (c) 2009, 2011, Oracle and/or its affiliates. All rights reserved.
 # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
 #
 # This code is free software; you can redistribute it and/or modify it
 # under the terms of the GNU General Public License version 2 only, as
 # published by the Free Software Foundation.  Oracle designates this
 # particular file as subject to the "Classpath" exception as provided
 # by Oracle in the LICENSE file that accompanied this code.
 #
 # This code is distributed in the hope that it will be useful, but WITHOUT
 # ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 # FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
 # version 2 for more details (a copy is included in the LICENSE file that
 # accompanied this code).
 #
 # You should have received a copy of the GNU General Public License version
 # 2 along with this work; if not, write to the Free Software Foundation,
 # Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
 #
 # Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
 # or visit www.oracle.com if you need additional information or have any
 # questions.
 #

 #
 # Makefile for building sunec.jar and sunec native library.
 #
 # This file was derived from make/com/sun/crypto/provider/Makefile.
 #

 #
 # (The terms "OpenJDK" and "JDK" below refer to OpenJDK and Sun JDK builds
 # respectively.)
 #
 # JCE builds are very different between OpenJDK and JDK.  The OpenJDK JCE
 # jar files do not require signing, but those for JDK do.  If an unsigned
 # jar file is installed into JDK, things will break when the crypto
 # routines are called.
 #
 # This Makefile does the "real" build of the JCE files.  For OpenJDK,
 # the jar files built here are installed directly into the OpenJDK.
 #
 # For JDK, the binaries use pre-built/pre-signed binary files stored in
 # the closed workspace that are not shipped in the OpenJDK workspaces.
 # We still build the JDK files here to verify the files compile, and in
 # preparation for possible signing.  Developers working on JCE in JDK
 # must sign the JCE files before testing.  The JCE signing key is kept
 # separate from the JDK workspace to prevent its disclosure.
 #
 # SPECIAL NOTE TO JCE/JDK developers:  The source files must eventually
 # be built, signed, and then the resulting jar files MUST BE CHECKED
 # INTO THE CLOSED PART OF THE WORKSPACE*.  This separate step *MUST NOT
 # BE FORGOTTEN*, otherwise a bug fixed in the source code will not be
 # reflected in the shipped binaries.  The "release" target should be
 # used to generate the required files.
 #
 # There are a number of targets to help both JDK/OpenJDK developers.
 #
 # Main Targets (JDK/OPENJDK):
 #
 #     all/clobber/clean		The usual, plus the native libraries.
 #				    If OpenJDK, installs sunec.jar.
 #				    If JDK, installs prebuilt
 #				    sunec.jar.
 #
 #     jar			Builds/installs sunec.jar
 #				    If OpenJDK, does not sign.
 #				    If JDK, tries to sign.
 #
 # Other lesser-used Targets (JDK/OPENJDK):
 #
 #     build-jar			Builds sunec.jar
 #				    (does not sign/install)
 #
 #     install-jar		Alias for "jar" above.
 #
 # Other targets (JDK only):
 #
 #     sign			Alias for sign-jar
 #	  sign-jar		Builds/signs sunec.jar (no install)
 #
 #     release			Builds all targets in preparation
 #				for workspace integration.
 #
 #     install-prebuilt		Installs the pre-built jar files
 #
 # This makefile was written to support parallel target execution.
 #

 BUILDDIR = ../../..
 PACKAGE = sun.security.ec
 PRODUCT = sun

 #
 # The following is for when we need to do postprocessing
 # (signing) against a read-only build.  If the OUTPUTDIR
 # isn't writable, the build currently crashes out.
 #
 ifndef OPENJDK
   ifdef ALT_JCE_BUILD_DIR
     # =====================================================
     # Where to place the output, in case we're building from a read-only
     # build area.  (e.g. a release engineering build.)
     JCE_BUILD_DIR=${ALT_JCE_BUILD_DIR}
     IGNORE_WRITABLE_OUTPUTDIR_TEST=true
   else
     JCE_BUILD_DIR=${TEMPDIR}
   endif
 endif

 JAVAC_MAX_WARNINGS=false
 JAVAC_LINT_OPTIONS=-Xlint:all,-deprecation
 JAVAC_WARNINGS_FATAL=true
 include $(BUILDDIR)/common/Defs.gmk

 #
 # Location for the newly built classfiles.
 #
 CLASSDESTDIR = $(TEMPDIR)/classes

 #
 # Java files
 #
 AUTO_FILES_JAVA_DIRS = $(PKGDIR)

 #
 # Exclude the sources that get built by ../other/Makefile
 #
 AUTO_JAVA_PRUNE = \
     ECKeyFactory.java \
     ECParameters.java \
     ECPrivateKeyImpl.java \
     ECPublicKeyImpl.java \
     NamedCurve.java

 #
 # Some licensees do not get the native ECC sources, but we still need to
 # be able to build "all" for them.  Check here to see if the sources are
 # available.  If not, then skip them.
 #

 NATIVE_ECC_AVAILABLE := $(shell \
     if [ -d $(SHARE_SRC)/native/$(PKGDIR)/impl ] ; then \
 	$(ECHO) true; \
     else \
 	$(ECHO) false; \
     fi)

 ifeq ($(NATIVE_ECC_AVAILABLE), true)

   LIBRARY = sunec

   #
   # Java files that define native methods
   #
   FILES_export = \
       $(PKGDIR)/ECDHKeyAgreement.java \
       $(PKGDIR)/ECDSASignature.java \
       $(PKGDIR)/ECKeyPairGenerator.java

   JAVAHFLAGS += -Xbootclasspath/p:$(CLASSDESTDIR)

   #
   # C and C++ files
   #
   include FILES_c.gmk

   FILES_cpp = ECC_JNI.cpp

   CPLUSPLUSLIBRARY=true

   FILES_m = mapfile-vers

   #
   # Find native code
   #
   vpath %.cpp $(SHARE_SRC)/native/$(PKGDIR)

   vpath %.c $(SHARE_SRC)/native/$(PKGDIR)/impl

   #
   # Find include files
   #
   OTHER_INCLUDES += -I$(SHARE_SRC)/native/$(PKGDIR)/impl

   #
   # Compiler flags
   #
   OTHER_CFLAGS += -DMP_API_COMPATIBLE -DNSS_ECC_MORE_THAN_SUITE_B

   #
   # Libraries to link
   #
   ifneq ($(PLATFORM), windows)
     OTHER_LDLIBS = $(LIBCXX)
   endif

   include $(BUILDDIR)/common/Mapfile-vers.gmk

   include $(BUILDDIR)/common/Library.gmk

 else # NATIVE_ECC_AVAILABLE

   include $(BUILDDIR)/common/Classes.gmk

 endif # NATIVE_ECC_AVAILABLE

 #
 # We use a variety of subdirectories in the $(TEMPDIR) depending on what
 # part of the build we're doing.  Both OPENJDK/JDK builds are initially
 # done in the unsigned area.  When files are signed in JDK,
 # they will be placed in the appropriate area.
 #
 UNSIGNED_DIR = $(TEMPDIR)/unsigned

 include $(BUILDDIR)/javax/crypto/Defs-jce.gmk

 #
 # Rules
 #

 ifdef OPENJDK
 all: build-jar install-jar
 else
 all: build-jar install-prebuilt
 	$(build-warning)
 endif


 # =====================================================
 # Build the unsigned sunec.jar file.
 #

 JAR_DESTFILE = $(EXTDIR)/sunec.jar

 #
 # Since the -C option to jar is used below, each directory entry must be
 # preceded with the appropriate directory to "cd" into.
 #
 JAR_DIRS = $(patsubst %, -C $(CLASSDESTDIR) %, $(AUTO_FILES_JAVA_DIRS))

 build-jar: $(UNSIGNED_DIR)/sunec.jar

 #
 # Build sunec.jar.
 #
 $(UNSIGNED_DIR)/sunec.jar: build
 	$(prep-target)
 	$(BOOT_JAR_CMD) cf $@ $(JAR_DIRS) \
 	    $(BOOT_JAR_JFLAGS)
 	@$(java-vm-cleanup)


 ifndef OPENJDK
 # =====================================================
 # Sign the provider jar file.  Not needed for OpenJDK.
 #

 SIGNED_DIR = $(JCE_BUILD_DIR)/signed

 sign: sign-jar

 sign-jar: $(SIGNED_DIR)/sunec.jar

 ifndef ALT_JCE_BUILD_DIR
 $(SIGNED_DIR)/sunec.jar: $(UNSIGNED_DIR)/sunec.jar
 else
 #
 # We have to remove the build dependency, otherwise, we'll try to rebuild it
 # which we can't do on a read-only filesystem.
 #
 $(SIGNED_DIR)/sunec.jar:
 	@if [ ! -r $(UNSIGNED_DIR)/sunec.jar ] ; then \
 	    $(ECHO) "Couldn't find $(UNSIGNED_DIR)/sunec.jar"; \
 	    exit 1; \
 	fi
 endif
 	$(call sign-file, $(UNSIGNED_DIR)/sunec.jar)


 # =====================================================
 # Create the Release Engineering files.  Signed builds, etc.
 #

 release: $(SIGNED_DIR)/sunec.jar
 	$(RM) $(JCE_BUILD_DIR)/release/sunec.jar
 	$(MKDIR) -p $(JCE_BUILD_DIR)/release
 	$(CP) $(SIGNED_DIR)/sunec.jar $(JCE_BUILD_DIR)/release
 	$(release-warning)

 endif # OPENJDK


 # =====================================================
 # Install routines.
 #

 #
 # Install sunec.jar, depending on which type is requested.
 #
 install-jar jar: $(JAR_DESTFILE)
 ifndef OPENJDK
 	$(release-warning)
 endif

 ifdef OPENJDK
 $(JAR_DESTFILE): $(UNSIGNED_DIR)/sunec.jar
 else
 $(JAR_DESTFILE): $(SIGNED_DIR)/sunec.jar
 endif
 	$(install-file)

 ifndef OPENJDK
 install-prebuilt:
 	@$(ECHO) "\n>>>Installing prebuilt SunEC provider..."
 	$(RM) $(JAR_DESTFILE)
 	$(CP) $(PREBUILT_DIR)/ec/sunec.jar $(JAR_DESTFILE)
 endif


 # =====================================================
 # Support routines.
 #

 clobber clean::
 	$(RM) -r $(JAR_DESTFILE) $(TEMPDIR) $(JCE_BUILD_DIR)

 .PHONY: build-jar jar install-jar
 ifndef OPENJDK
 .PHONY: sign sign-jar release install-prebuilt
 endif
	#
	# Copyright (c) 2009, 2011, Oracle and/or its affiliates. All rights reserved.
	# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
	#
	# This code is free software; you can redistribute it and/or modify it
	# under the terms of the GNU General Public License version 2 only, as
	# published by the Free Software Foundation. Oracle designates this
	# particular file as subject to the "Classpath" exception as provided
	# by Oracle in the LICENSE file that accompanied this code.
	#
	# This code is distributed in the hope that it will be useful, but WITHOUT
	# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
	# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
	# version 2 for more details (a copy is included in the LICENSE file that
	# accompanied this code).
	#
	# You should have received a copy of the GNU General Public License version
	# 2 along with this work; if not, write to the Free Software Foundation,
	# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
	#
	# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
	# or visit www.oracle.com if you need additional information or have any
	# questions.
	#

	#
	# Makefile for building sunec.jar and sunec native library.
	#
	# This file was derived from make/com/sun/crypto/provider/Makefile.
	#

	#
	# (The terms "OpenJDK" and "JDK" below refer to OpenJDK and Sun JDK builds
	# respectively.)
	#
	# JCE builds are very different between OpenJDK and JDK. The OpenJDK JCE
	# jar files do not require signing, but those for JDK do. If an unsigned
	# jar file is installed into JDK, things will break when the crypto
	# routines are called.
	#
	# This Makefile does the "real" build of the JCE files. For OpenJDK,
	# the jar files built here are installed directly into the OpenJDK.
	#
	# For JDK, the binaries use pre-built/pre-signed binary files stored in
	# the closed workspace that are not shipped in the OpenJDK workspaces.
	# We still build the JDK files here to verify the files compile, and in
	# preparation for possible signing. Developers working on JCE in JDK
	# must sign the JCE files before testing. The JCE signing key is kept
	# separate from the JDK workspace to prevent its disclosure.
	#
	# SPECIAL NOTE TO JCE/JDK developers: The source files must eventually
	# be built, signed, and then the resulting jar files MUST BE CHECKED
	# INTO THE CLOSED PART OF THE WORKSPACE. This separate step MUST NOT
	# BE FORGOTTEN*, otherwise a bug fixed in the source code will not be
	# reflected in the shipped binaries. The "release" target should be
	# used to generate the required files.
	#
	# There are a number of targets to help both JDK/OpenJDK developers.
	#
	# Main Targets (JDK/OPENJDK):
	#
	# all/clobber/clean The usual, plus the native libraries.
	# If OpenJDK, installs sunec.jar.
	# If JDK, installs prebuilt
	# sunec.jar.
	#
	# jar Builds/installs sunec.jar
	# If OpenJDK, does not sign.
	# If JDK, tries to sign.
	#
	# Other lesser-used Targets (JDK/OPENJDK):
	#
	# build-jar Builds sunec.jar
	# (does not sign/install)
	#
	# install-jar Alias for "jar" above.
	#
	# Other targets (JDK only):
	#
	# sign Alias for sign-jar
	# sign-jar Builds/signs sunec.jar (no install)
	#
	# release Builds all targets in preparation
	# for workspace integration.
	#
	# install-prebuilt Installs the pre-built jar files
	#
	# This makefile was written to support parallel target execution.
	#

	BUILDDIR = ../../..
	PACKAGE = sun.security.ec
	PRODUCT = sun

	#
	# The following is for when we need to do postprocessing
	# (signing) against a read-only build. If the OUTPUTDIR
	# isn't writable, the build currently crashes out.
	#
	ifndef OPENJDK
	ifdef ALT_JCE_BUILD_DIR
	# =====================================================
	# Where to place the output, in case we're building from a read-only
	# build area. (e.g. a release engineering build.)
	JCE_BUILD_DIR=${ALT_JCE_BUILD_DIR}
	IGNORE_WRITABLE_OUTPUTDIR_TEST=true
	else
	JCE_BUILD_DIR=${TEMPDIR}
	endif
	endif

	JAVAC_MAX_WARNINGS=false
	JAVAC_LINT_OPTIONS=-Xlint:all,-deprecation
	JAVAC_WARNINGS_FATAL=true
	include $(BUILDDIR)/common/Defs.gmk

	#
	# Location for the newly built classfiles.
	#
	CLASSDESTDIR = $(TEMPDIR)/classes

	#
	# Java files
	#
	AUTO_FILES_JAVA_DIRS = $(PKGDIR)

	#
	# Exclude the sources that get built by ../other/Makefile
	#
	AUTO_JAVA_PRUNE = \
	ECKeyFactory.java \
	ECParameters.java \
	ECPrivateKeyImpl.java \
	ECPublicKeyImpl.java \
	NamedCurve.java

	#
	# Some licensees do not get the native ECC sources, but we still need to
	# be able to build "all" for them. Check here to see if the sources are
	# available. If not, then skip them.
	#

	NATIVE_ECC_AVAILABLE := $(shell \
	if [ -d $(SHARE_SRC)/native/$(PKGDIR)/impl ] ; then \
	$(ECHO) true; \
	else \
	$(ECHO) false; \
	fi)

	ifeq ($(NATIVE_ECC_AVAILABLE), true)

	LIBRARY = sunec

	#
	# Java files that define native methods
	#
	FILES_export = \
	$(PKGDIR)/ECDHKeyAgreement.java \
	$(PKGDIR)/ECDSASignature.java \
	$(PKGDIR)/ECKeyPairGenerator.java

	JAVAHFLAGS += -Xbootclasspath/p:$(CLASSDESTDIR)

	#
	# C and C++ files
	#
	include FILES_c.gmk

	FILES_cpp = ECC_JNI.cpp

	CPLUSPLUSLIBRARY=true

	FILES_m = mapfile-vers

	#
	# Find native code
	#
	vpath %.cpp $(SHARE_SRC)/native/$(PKGDIR)

	vpath %.c $(SHARE_SRC)/native/$(PKGDIR)/impl

	#
	# Find include files
	#
	OTHER_INCLUDES += -I$(SHARE_SRC)/native/$(PKGDIR)/impl

	#
	# Compiler flags
	#
	OTHER_CFLAGS += -DMP_API_COMPATIBLE -DNSS_ECC_MORE_THAN_SUITE_B

	#
	# Libraries to link
	#
	ifneq ($(PLATFORM), windows)
	OTHER_LDLIBS = $(LIBCXX)
	endif

	include $(BUILDDIR)/common/Mapfile-vers.gmk

	include $(BUILDDIR)/common/Library.gmk

	else # NATIVE_ECC_AVAILABLE

	include $(BUILDDIR)/common/Classes.gmk

	endif # NATIVE_ECC_AVAILABLE

	#
	# We use a variety of subdirectories in the $(TEMPDIR) depending on what
	# part of the build we're doing. Both OPENJDK/JDK builds are initially
	# done in the unsigned area. When files are signed in JDK,
	# they will be placed in the appropriate area.
	#
	UNSIGNED_DIR = $(TEMPDIR)/unsigned

	include $(BUILDDIR)/javax/crypto/Defs-jce.gmk

	#
	# Rules
	#

	ifdef OPENJDK
	all: build-jar install-jar
	else
	all: build-jar install-prebuilt
	$(build-warning)
	endif


	# =====================================================
	# Build the unsigned sunec.jar file.
	#

	JAR_DESTFILE = $(EXTDIR)/sunec.jar

	#
	# Since the -C option to jar is used below, each directory entry must be
	# preceded with the appropriate directory to "cd" into.
	#
	JAR_DIRS = $(patsubst %, -C $(CLASSDESTDIR) %, $(AUTO_FILES_JAVA_DIRS))

	build-jar: $(UNSIGNED_DIR)/sunec.jar

	#
	# Build sunec.jar.
	#
	$(UNSIGNED_DIR)/sunec.jar: build
	$(prep-target)
	$(BOOT_JAR_CMD) cf $@ $(JAR_DIRS) \
	$(BOOT_JAR_JFLAGS)
	@$(java-vm-cleanup)


	ifndef OPENJDK
	# =====================================================
	# Sign the provider jar file. Not needed for OpenJDK.
	#

	SIGNED_DIR = $(JCE_BUILD_DIR)/signed

	sign: sign-jar

	sign-jar: $(SIGNED_DIR)/sunec.jar

	ifndef ALT_JCE_BUILD_DIR
	$(SIGNED_DIR)/sunec.jar: $(UNSIGNED_DIR)/sunec.jar
	else
	#
	# We have to remove the build dependency, otherwise, we'll try to rebuild it
	# which we can't do on a read-only filesystem.
	#
	$(SIGNED_DIR)/sunec.jar:
	@if [ ! -r $(UNSIGNED_DIR)/sunec.jar ] ; then \
	$(ECHO) "Couldn't find $(UNSIGNED_DIR)/sunec.jar"; \
	exit 1; \
	fi
	endif
	$(call sign-file, $(UNSIGNED_DIR)/sunec.jar)


	# =====================================================
	# Create the Release Engineering files. Signed builds, etc.
	#

	release: $(SIGNED_DIR)/sunec.jar
	$(RM) $(JCE_BUILD_DIR)/release/sunec.jar
	$(MKDIR) -p $(JCE_BUILD_DIR)/release
	$(CP) $(SIGNED_DIR)/sunec.jar $(JCE_BUILD_DIR)/release
	$(release-warning)

	endif # OPENJDK


	# =====================================================
	# Install routines.
	#

	#
	# Install sunec.jar, depending on which type is requested.
	#
	install-jar jar: $(JAR_DESTFILE)
	ifndef OPENJDK
	$(release-warning)
	endif

	ifdef OPENJDK
	$(JAR_DESTFILE): $(UNSIGNED_DIR)/sunec.jar
	else
	$(JAR_DESTFILE): $(SIGNED_DIR)/sunec.jar
	endif
	$(install-file)

	ifndef OPENJDK
	install-prebuilt:
	@$(ECHO) "\n>>>Installing prebuilt SunEC provider..."
	$(RM) $(JAR_DESTFILE)
	$(CP) $(PREBUILT_DIR)/ec/sunec.jar $(JAR_DESTFILE)
	endif


	# =====================================================
	# Support routines.
	#

	clobber clean::
	$(RM) -r $(JAR_DESTFILE) $(TEMPDIR) $(JCE_BUILD_DIR)

	.PHONY: build-jar jar install-jar
	ifndef OPENJDK
	.PHONY: sign sign-jar release install-prebuilt
	endif