| # $Id: Makefile.in,v 1.285 2007/06/11 04:01:42 djm Exp $ |
| |
| # uncomment if you run a non bourne compatable shell. Ie. csh |
| #SHELL = @SH@ |
| |
| AUTORECONF=autoreconf |
| |
| prefix=@prefix@ |
| exec_prefix=@exec_prefix@ |
| bindir=@bindir@ |
| sbindir=@sbindir@ |
| libexecdir=@libexecdir@ |
| datadir=@datadir@ |
| datarootdir=@datarootdir@ |
| mandir=@mandir@ |
| mansubdir=@mansubdir@ |
| sysconfdir=@sysconfdir@ |
| piddir=@piddir@ |
| srcdir=@srcdir@ |
| top_srcdir=@top_srcdir@ |
| |
| DESTDIR= |
| VPATH=@srcdir@ |
| SSH_PROGRAM=@bindir@/ssh |
| ASKPASS_PROGRAM=$(libexecdir)/ssh-askpass |
| SFTP_SERVER=$(libexecdir)/sftp-server |
| SSH_KEYSIGN=$(libexecdir)/ssh-keysign |
| RAND_HELPER=$(libexecdir)/ssh-rand-helper |
| PRIVSEP_PATH=@PRIVSEP_PATH@ |
| SSH_PRIVSEP_USER=@SSH_PRIVSEP_USER@ |
| STRIP_OPT=@STRIP_OPT@ |
| |
| PATHS= -DSSHDIR=\"$(sysconfdir)\" \ |
| -D_PATH_SSH_PROGRAM=\"$(SSH_PROGRAM)\" \ |
| -D_PATH_SSH_ASKPASS_DEFAULT=\"$(ASKPASS_PROGRAM)\" \ |
| -D_PATH_SFTP_SERVER=\"$(SFTP_SERVER)\" \ |
| -D_PATH_SSH_KEY_SIGN=\"$(SSH_KEYSIGN)\" \ |
| -D_PATH_SSH_PIDDIR=\"$(piddir)\" \ |
| -D_PATH_PRIVSEP_CHROOT_DIR=\"$(PRIVSEP_PATH)\" \ |
| -DSSH_RAND_HELPER=\"$(RAND_HELPER)\" |
| |
| CC=@CC@ |
| LD=@LD@ |
| CFLAGS=@CFLAGS@ |
| CPPFLAGS=-I. -I$(srcdir) @CPPFLAGS@ $(PATHS) @DEFS@ |
| LIBS=@LIBS@ |
| SSHDLIBS=@SSHDLIBS@ |
| LIBEDIT=@LIBEDIT@ |
| AR=@AR@ |
| AWK=@AWK@ |
| RANLIB=@RANLIB@ |
| INSTALL=@INSTALL@ |
| PERL=@PERL@ |
| SED=@SED@ |
| ENT=@ENT@ |
| XAUTH_PATH=@XAUTH_PATH@ |
| LDFLAGS=-L. -Lopenbsd-compat/ @LDFLAGS@ |
| EXEEXT=@EXEEXT@ |
| |
| INSTALL_SSH_PRNG_CMDS=@INSTALL_SSH_PRNG_CMDS@ |
| INSTALL_SSH_RAND_HELPER=@INSTALL_SSH_RAND_HELPER@ |
| |
| TARGETS=ssh$(EXEEXT) sshd$(EXEEXT) ssh-add$(EXEEXT) ssh-keygen$(EXEEXT) ssh-keyscan${EXEEXT} ssh-keysign${EXEEXT} ssh-agent$(EXEEXT) scp$(EXEEXT) ssh-rand-helper${EXEEXT} sftp-server$(EXEEXT) sftp$(EXEEXT) |
| |
| LIBSSH_OBJS=acss.o authfd.o authfile.o bufaux.o bufbn.o buffer.o \ |
| canohost.o channels.o cipher.o cipher-acss.o cipher-aes.o \ |
| cipher-bf1.o cipher-ctr.o cipher-3des1.o cleanup.o \ |
| compat.o compress.o crc32.o deattack.o fatal.o hostfile.o \ |
| log.o match.o md-sha256.o moduli.o nchan.o packet.o \ |
| readpass.o rsa.o ttymodes.o xmalloc.o \ |
| atomicio.o key.o dispatch.o kex.o mac.o uidswap.o uuencode.o misc.o \ |
| monitor_fdpass.o rijndael.o ssh-dss.o ssh-rsa.o dh.o kexdh.o \ |
| kexgex.o kexdhc.o kexgexc.o scard.o msg.o progressmeter.o dns.o \ |
| entropy.o scard-opensc.o gss-genr.o umac.o |
| |
| SSHOBJS= ssh.o readconf.o clientloop.o sshtty.o \ |
| sshconnect.o sshconnect1.o sshconnect2.o |
| |
| SSHDOBJS=sshd.o auth-rhosts.o auth-passwd.o auth-rsa.o auth-rh-rsa.o \ |
| sshpty.o sshlogin.o servconf.o serverloop.o \ |
| auth.o auth1.o auth2.o auth-options.o session.o \ |
| auth-chall.o auth2-chall.o groupaccess.o \ |
| auth-skey.o auth-bsdauth.o auth2-hostbased.o auth2-kbdint.o \ |
| auth2-none.o auth2-passwd.o auth2-pubkey.o \ |
| monitor_mm.o monitor.o monitor_wrap.o kexdhs.o kexgexs.o \ |
| auth-krb5.o \ |
| auth2-gss.o gss-serv.o gss-serv-krb5.o \ |
| loginrec.o auth-pam.o auth-shadow.o auth-sia.o md5crypt.o \ |
| audit.o audit-bsm.o platform.o |
| |
| MANPAGES = scp.1.out ssh-add.1.out ssh-agent.1.out ssh-keygen.1.out ssh-keyscan.1.out ssh.1.out sshd.8.out sftp-server.8.out sftp.1.out ssh-rand-helper.8.out ssh-keysign.8.out sshd_config.5.out ssh_config.5.out |
| MANPAGES_IN = scp.1 ssh-add.1 ssh-agent.1 ssh-keygen.1 ssh-keyscan.1 ssh.1 sshd.8 sftp-server.8 sftp.1 ssh-rand-helper.8 ssh-keysign.8 sshd_config.5 ssh_config.5 |
| MANTYPE = @MANTYPE@ |
| |
| CONFIGFILES=sshd_config.out ssh_config.out moduli.out |
| CONFIGFILES_IN=sshd_config ssh_config moduli |
| |
| PATHSUBS = \ |
| -e 's|/etc/ssh/ssh_prng_cmds|$(sysconfdir)/ssh_prng_cmds|g' \ |
| -e 's|/etc/ssh/ssh_config|$(sysconfdir)/ssh_config|g' \ |
| -e 's|/etc/ssh/ssh_known_hosts|$(sysconfdir)/ssh_known_hosts|g' \ |
| -e 's|/etc/ssh/sshd_config|$(sysconfdir)/sshd_config|g' \ |
| -e 's|/usr/libexec|$(libexecdir)|g' \ |
| -e 's|/etc/shosts.equiv|$(sysconfdir)/shosts.equiv|g' \ |
| -e 's|/etc/ssh/ssh_host_key|$(sysconfdir)/ssh_host_key|g' \ |
| -e 's|/etc/ssh/ssh_host_dsa_key|$(sysconfdir)/ssh_host_dsa_key|g' \ |
| -e 's|/etc/ssh/ssh_host_rsa_key|$(sysconfdir)/ssh_host_rsa_key|g' \ |
| -e 's|/var/run/sshd.pid|$(piddir)/sshd.pid|g' \ |
| -e 's|/etc/ssh/moduli|$(sysconfdir)/moduli|g' \ |
| -e 's|/etc/ssh/sshrc|$(sysconfdir)/sshrc|g' \ |
| -e 's|/usr/X11R6/bin/xauth|$(XAUTH_PATH)|g' \ |
| -e 's|/var/empty|$(PRIVSEP_PATH)|g' \ |
| -e 's|/usr/bin:/bin:/usr/sbin:/sbin|@user_path@|g' |
| |
| FIXPATHSCMD = $(SED) $(PATHSUBS) |
| |
| all: $(CONFIGFILES) ssh_prng_cmds.out $(MANPAGES) $(TARGETS) |
| |
| $(LIBSSH_OBJS): Makefile.in config.h |
| $(SSHOBJS): Makefile.in config.h |
| $(SSHDOBJS): Makefile.in config.h |
| |
| .c.o: |
| $(CC) $(CFLAGS) $(CPPFLAGS) -c $< |
| |
| LIBCOMPAT=openbsd-compat/libopenbsd-compat.a |
| $(LIBCOMPAT): always |
| (cd openbsd-compat && $(MAKE)) |
| always: |
| |
| libssh.a: $(LIBSSH_OBJS) |
| $(AR) rv $@ $(LIBSSH_OBJS) |
| $(RANLIB) $@ |
| |
| ssh$(EXEEXT): $(LIBCOMPAT) libssh.a $(SSHOBJS) |
| $(LD) -o $@ $(SSHOBJS) $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS) |
| |
| sshd$(EXEEXT): libssh.a $(LIBCOMPAT) $(SSHDOBJS) |
| $(LD) -o $@ $(SSHDOBJS) $(LDFLAGS) -lssh -lopenbsd-compat $(SSHDLIBS) $(LIBS) |
| |
| scp$(EXEEXT): $(LIBCOMPAT) libssh.a scp.o progressmeter.o |
| $(LD) -o $@ scp.o progressmeter.o bufaux.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS) |
| |
| ssh-add$(EXEEXT): $(LIBCOMPAT) libssh.a ssh-add.o |
| $(LD) -o $@ ssh-add.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS) |
| |
| ssh-agent$(EXEEXT): $(LIBCOMPAT) libssh.a ssh-agent.o |
| $(LD) -o $@ ssh-agent.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS) |
| |
| ssh-keygen$(EXEEXT): $(LIBCOMPAT) libssh.a ssh-keygen.o |
| $(LD) -o $@ ssh-keygen.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS) |
| |
| ssh-keysign$(EXEEXT): $(LIBCOMPAT) libssh.a ssh-keysign.o |
| $(LD) -o $@ ssh-keysign.o readconf.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS) |
| |
| ssh-keyscan$(EXEEXT): $(LIBCOMPAT) libssh.a ssh-keyscan.o |
| $(LD) -o $@ ssh-keyscan.o $(LDFLAGS) -lssh -lopenbsd-compat -lssh $(LIBS) |
| |
| sftp-server$(EXEEXT): $(LIBCOMPAT) libssh.a sftp.o sftp-common.o sftp-server.o |
| $(LD) -o $@ sftp-server.o sftp-common.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS) |
| |
| sftp$(EXEEXT): $(LIBCOMPAT) libssh.a sftp.o sftp-client.o sftp-common.o sftp-glob.o progressmeter.o |
| $(LD) -o $@ progressmeter.o sftp.o sftp-client.o sftp-common.o sftp-glob.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS) $(LIBEDIT) |
| |
| ssh-rand-helper${EXEEXT}: $(LIBCOMPAT) libssh.a ssh-rand-helper.o |
| $(LD) -o $@ ssh-rand-helper.o $(LDFLAGS) -lssh -lopenbsd-compat $(LIBS) |
| |
| # test driver for the loginrec code - not built by default |
| logintest: logintest.o $(LIBCOMPAT) libssh.a loginrec.o |
| $(LD) -o $@ logintest.o $(LDFLAGS) loginrec.o -lopenbsd-compat -lssh $(LIBS) |
| |
| $(MANPAGES): $(MANPAGES_IN) |
| if test "$(MANTYPE)" = "cat"; then \ |
| manpage=$(srcdir)/`echo $@ | sed 's/\.[1-9]\.out$$/\.0/'`; \ |
| else \ |
| manpage=$(srcdir)/`echo $@ | sed 's/\.out$$//'`; \ |
| fi; \ |
| if test "$(MANTYPE)" = "man"; then \ |
| $(FIXPATHSCMD) $${manpage} | $(AWK) -f $(srcdir)/mdoc2man.awk > $@; \ |
| else \ |
| $(FIXPATHSCMD) $${manpage} > $@; \ |
| fi |
| |
| $(CONFIGFILES): $(CONFIGFILES_IN) |
| conffile=`echo $@ | sed 's/.out$$//'`; \ |
| $(FIXPATHSCMD) $(srcdir)/$${conffile} > $@ |
| |
| ssh_prng_cmds.out: ssh_prng_cmds |
| if test ! -z "$(INSTALL_SSH_PRNG_CMDS)"; then \ |
| $(PERL) $(srcdir)/fixprogs ssh_prng_cmds $(ENT); \ |
| fi |
| |
| # fake rule to stop make trying to compile moduli.o into a binary "moduli.o" |
| moduli: |
| echo |
| |
| clean: regressclean |
| rm -f *.o *.a $(TARGETS) logintest config.cache config.log |
| rm -f *.out core survey |
| (cd openbsd-compat && $(MAKE) clean) |
| |
| distclean: regressclean |
| rm -f *.o *.a $(TARGETS) logintest config.cache config.log |
| rm -f *.out core opensshd.init openssh.xml |
| rm -f Makefile buildpkg.sh config.h config.status ssh_prng_cmds |
| rm -f survey.sh openbsd-compat/regress/Makefile *~ |
| rm -rf autom4te.cache |
| (cd openbsd-compat && $(MAKE) distclean) |
| (cd scard && $(MAKE) distclean) |
| if test -d pkg ; then \ |
| rm -fr pkg ; \ |
| fi |
| |
| veryclean: distclean |
| rm -f configure config.h.in *.0 |
| |
| mrproper: veryclean |
| |
| realclean: veryclean |
| |
| catman-do: |
| @for f in $(MANPAGES_IN) ; do \ |
| base=`echo $$f | sed 's/\..*$$//'` ; \ |
| echo "$$f -> $$base.0" ; \ |
| nroff -mandoc $$f | cat -v | sed -e 's/.\^H//g' \ |
| >$$base.0 ; \ |
| done |
| |
| distprep: catman-do |
| $(AUTORECONF) |
| -rm -rf autom4te.cache |
| (cd scard && $(MAKE) -f Makefile.in distprep) |
| |
| install: $(CONFIGFILES) ssh_prng_cmds.out $(MANPAGES) $(TARGETS) install-files install-sysconf host-key check-config |
| install-nokeys: $(CONFIGFILES) ssh_prng_cmds.out $(MANPAGES) $(TARGETS) install-files install-sysconf |
| install-nosysconf: $(CONFIGFILES) ssh_prng_cmds.out $(MANPAGES) $(TARGETS) install-files |
| |
| check-config: |
| -$(DESTDIR)$(sbindir)/sshd -t -f $(DESTDIR)$(sysconfdir)/sshd_config |
| |
| scard-install: |
| (cd scard && $(MAKE) DESTDIR=$(DESTDIR) install) |
| |
| install-files: scard-install |
| $(srcdir)/mkinstalldirs $(DESTDIR)$(bindir) |
| $(srcdir)/mkinstalldirs $(DESTDIR)$(sbindir) |
| $(srcdir)/mkinstalldirs $(DESTDIR)$(mandir) |
| $(srcdir)/mkinstalldirs $(DESTDIR)$(datadir) |
| $(srcdir)/mkinstalldirs $(DESTDIR)$(mandir)/$(mansubdir)1 |
| $(srcdir)/mkinstalldirs $(DESTDIR)$(mandir)/$(mansubdir)5 |
| $(srcdir)/mkinstalldirs $(DESTDIR)$(mandir)/$(mansubdir)8 |
| $(srcdir)/mkinstalldirs $(DESTDIR)$(libexecdir) |
| (umask 022 ; $(srcdir)/mkinstalldirs $(DESTDIR)$(PRIVSEP_PATH)) |
| $(INSTALL) -m 0755 $(STRIP_OPT) ssh $(DESTDIR)$(bindir)/ssh |
| $(INSTALL) -m 0755 $(STRIP_OPT) scp $(DESTDIR)$(bindir)/scp |
| $(INSTALL) -m 0755 $(STRIP_OPT) ssh-add $(DESTDIR)$(bindir)/ssh-add |
| $(INSTALL) -m 0755 $(STRIP_OPT) ssh-agent $(DESTDIR)$(bindir)/ssh-agent |
| $(INSTALL) -m 0755 $(STRIP_OPT) ssh-keygen $(DESTDIR)$(bindir)/ssh-keygen |
| $(INSTALL) -m 0755 $(STRIP_OPT) ssh-keyscan $(DESTDIR)$(bindir)/ssh-keyscan |
| $(INSTALL) -m 0755 $(STRIP_OPT) sshd $(DESTDIR)$(sbindir)/sshd |
| if test ! -z "$(INSTALL_SSH_RAND_HELPER)" ; then \ |
| $(INSTALL) -m 0755 $(STRIP_OPT) ssh-rand-helper $(DESTDIR)$(libexecdir)/ssh-rand-helper ; \ |
| fi |
| $(INSTALL) -m 4711 $(STRIP_OPT) ssh-keysign $(DESTDIR)$(SSH_KEYSIGN) |
| $(INSTALL) -m 0755 $(STRIP_OPT) sftp $(DESTDIR)$(bindir)/sftp |
| $(INSTALL) -m 0755 $(STRIP_OPT) sftp-server $(DESTDIR)$(SFTP_SERVER) |
| $(INSTALL) -m 644 ssh.1.out $(DESTDIR)$(mandir)/$(mansubdir)1/ssh.1 |
| $(INSTALL) -m 644 scp.1.out $(DESTDIR)$(mandir)/$(mansubdir)1/scp.1 |
| $(INSTALL) -m 644 ssh-add.1.out $(DESTDIR)$(mandir)/$(mansubdir)1/ssh-add.1 |
| $(INSTALL) -m 644 ssh-agent.1.out $(DESTDIR)$(mandir)/$(mansubdir)1/ssh-agent.1 |
| $(INSTALL) -m 644 ssh-keygen.1.out $(DESTDIR)$(mandir)/$(mansubdir)1/ssh-keygen.1 |
| $(INSTALL) -m 644 ssh-keyscan.1.out $(DESTDIR)$(mandir)/$(mansubdir)1/ssh-keyscan.1 |
| $(INSTALL) -m 644 sshd_config.5.out $(DESTDIR)$(mandir)/$(mansubdir)5/sshd_config.5 |
| $(INSTALL) -m 644 ssh_config.5.out $(DESTDIR)$(mandir)/$(mansubdir)5/ssh_config.5 |
| $(INSTALL) -m 644 sshd.8.out $(DESTDIR)$(mandir)/$(mansubdir)8/sshd.8 |
| if [ ! -z "$(INSTALL_SSH_RAND_HELPER)" ]; then \ |
| $(INSTALL) -m 644 ssh-rand-helper.8.out $(DESTDIR)$(mandir)/$(mansubdir)8/ssh-rand-helper.8 ; \ |
| fi |
| $(INSTALL) -m 644 sftp.1.out $(DESTDIR)$(mandir)/$(mansubdir)1/sftp.1 |
| $(INSTALL) -m 644 sftp-server.8.out $(DESTDIR)$(mandir)/$(mansubdir)8/sftp-server.8 |
| $(INSTALL) -m 644 ssh-keysign.8.out $(DESTDIR)$(mandir)/$(mansubdir)8/ssh-keysign.8 |
| -rm -f $(DESTDIR)$(bindir)/slogin |
| ln -s ./ssh$(EXEEXT) $(DESTDIR)$(bindir)/slogin |
| -rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/slogin.1 |
| ln -s ./ssh.1 $(DESTDIR)$(mandir)/$(mansubdir)1/slogin.1 |
| |
| install-sysconf: |
| if [ ! -d $(DESTDIR)$(sysconfdir) ]; then \ |
| $(srcdir)/mkinstalldirs $(DESTDIR)$(sysconfdir); \ |
| fi |
| @if [ ! -f $(DESTDIR)$(sysconfdir)/ssh_config ]; then \ |
| $(INSTALL) -m 644 ssh_config.out $(DESTDIR)$(sysconfdir)/ssh_config; \ |
| else \ |
| echo "$(DESTDIR)$(sysconfdir)/ssh_config already exists, install will not overwrite"; \ |
| fi |
| @if [ ! -f $(DESTDIR)$(sysconfdir)/sshd_config ]; then \ |
| $(INSTALL) -m 644 sshd_config.out $(DESTDIR)$(sysconfdir)/sshd_config; \ |
| else \ |
| echo "$(DESTDIR)$(sysconfdir)/sshd_config already exists, install will not overwrite"; \ |
| fi |
| @if [ -f ssh_prng_cmds ] && [ ! -z "$(INSTALL_SSH_PRNG_CMDS)" ]; then \ |
| if [ ! -f $(DESTDIR)$(sysconfdir)/ssh_prng_cmds ] ; then \ |
| $(INSTALL) -m 644 ssh_prng_cmds.out $(DESTDIR)$(sysconfdir)/ssh_prng_cmds; \ |
| else \ |
| echo "$(DESTDIR)$(sysconfdir)/ssh_prng_cmds already exists, install will not overwrite"; \ |
| fi ; \ |
| fi |
| @if [ ! -f $(DESTDIR)$(sysconfdir)/moduli ]; then \ |
| if [ -f $(DESTDIR)$(sysconfdir)/primes ]; then \ |
| echo "moving $(DESTDIR)$(sysconfdir)/primes to $(DESTDIR)$(sysconfdir)/moduli"; \ |
| mv "$(DESTDIR)$(sysconfdir)/primes" "$(DESTDIR)$(sysconfdir)/moduli"; \ |
| else \ |
| $(INSTALL) -m 644 moduli.out $(DESTDIR)$(sysconfdir)/moduli; \ |
| fi ; \ |
| else \ |
| echo "$(DESTDIR)$(sysconfdir)/moduli already exists, install will not overwrite"; \ |
| fi |
| |
| host-key: ssh-keygen$(EXEEXT) |
| @if [ -z "$(DESTDIR)" ] ; then \ |
| if [ -f "$(DESTDIR)$(sysconfdir)/ssh_host_key" ] ; then \ |
| echo "$(DESTDIR)$(sysconfdir)/ssh_host_key already exists, skipping." ; \ |
| else \ |
| ./ssh-keygen -t rsa1 -f $(DESTDIR)$(sysconfdir)/ssh_host_key -N "" ; \ |
| fi ; \ |
| if [ -f $(DESTDIR)$(sysconfdir)/ssh_host_dsa_key ] ; then \ |
| echo "$(DESTDIR)$(sysconfdir)/ssh_host_dsa_key already exists, skipping." ; \ |
| else \ |
| ./ssh-keygen -t dsa -f $(DESTDIR)$(sysconfdir)/ssh_host_dsa_key -N "" ; \ |
| fi ; \ |
| if [ -f $(DESTDIR)$(sysconfdir)/ssh_host_rsa_key ] ; then \ |
| echo "$(DESTDIR)$(sysconfdir)/ssh_host_rsa_key already exists, skipping." ; \ |
| else \ |
| ./ssh-keygen -t rsa -f $(DESTDIR)$(sysconfdir)/ssh_host_rsa_key -N "" ; \ |
| fi ; \ |
| fi ; |
| |
| host-key-force: ssh-keygen$(EXEEXT) |
| ./ssh-keygen -t rsa1 -f $(DESTDIR)$(sysconfdir)/ssh_host_key -N "" |
| ./ssh-keygen -t dsa -f $(DESTDIR)$(sysconfdir)/ssh_host_dsa_key -N "" |
| ./ssh-keygen -t rsa -f $(DESTDIR)$(sysconfdir)/ssh_host_rsa_key -N "" |
| |
| uninstallall: uninstall |
| -rm -f $(DESTDIR)$(sysconfdir)/ssh_config |
| -rm -f $(DESTDIR)$(sysconfdir)/sshd_config |
| -rm -f $(DESTDIR)$(sysconfdir)/ssh_prng_cmds |
| -rmdir $(DESTDIR)$(sysconfdir) |
| -rmdir $(DESTDIR)$(bindir) |
| -rmdir $(DESTDIR)$(sbindir) |
| -rmdir $(DESTDIR)$(mandir)/$(mansubdir)1 |
| -rmdir $(DESTDIR)$(mandir)/$(mansubdir)8 |
| -rmdir $(DESTDIR)$(mandir) |
| -rmdir $(DESTDIR)$(libexecdir) |
| |
| uninstall: |
| -rm -f $(DESTDIR)$(bindir)/slogin |
| -rm -f $(DESTDIR)$(bindir)/ssh$(EXEEXT) |
| -rm -f $(DESTDIR)$(bindir)/scp$(EXEEXT) |
| -rm -f $(DESTDIR)$(bindir)/ssh-add$(EXEEXT) |
| -rm -f $(DESTDIR)$(bindir)/ssh-agent$(EXEEXT) |
| -rm -f $(DESTDIR)$(bindir)/ssh-keygen$(EXEEXT) |
| -rm -f $(DESTDIR)$(bindir)/ssh-keyscan$(EXEEXT) |
| -rm -f $(DESTDIR)$(bindir)/sftp$(EXEEXT) |
| -rm -f $(DESTDIR)$(sbindir)/sshd$(EXEEXT) |
| -rm -r $(DESTDIR)$(SFTP_SERVER)$(EXEEXT) |
| -rm -f $(DESTDIR)$(SSH_KEYSIGN)$(EXEEXT) |
| -rm -f $(DESTDIR)$(RAND_HELPER)$(EXEEXT) |
| -rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/ssh.1 |
| -rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/scp.1 |
| -rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/ssh-add.1 |
| -rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/ssh-agent.1 |
| -rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/ssh-keygen.1 |
| -rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/sftp.1 |
| -rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/ssh-keyscan.1 |
| -rm -f $(DESTDIR)$(mandir)/$(mansubdir)8/sshd.8 |
| -rm -f $(DESTDIR)$(mandir)/$(mansubdir)8/ssh-rand-helper.8 |
| -rm -f $(DESTDIR)$(mandir)/$(mansubdir)8/sftp-server.8 |
| -rm -f $(DESTDIR)$(mandir)/$(mansubdir)8/ssh-keysign.8 |
| -rm -f $(DESTDIR)$(mandir)/$(mansubdir)1/slogin.1 |
| |
| tests: $(TARGETS) |
| BUILDDIR=`pwd`; \ |
| [ -d `pwd`/regress ] || mkdir -p `pwd`/regress; \ |
| [ -f `pwd`/regress/Makefile ] || \ |
| ln -s `cd $(srcdir) && pwd`/regress/Makefile `pwd`/regress/Makefile ; \ |
| TEST_SHELL="@TEST_SHELL@"; \ |
| TEST_SSH_SSH="$${BUILDDIR}/ssh"; \ |
| TEST_SSH_SSHD="$${BUILDDIR}/sshd"; \ |
| TEST_SSH_SSHAGENT="$${BUILDDIR}/ssh-agent"; \ |
| TEST_SSH_SSHADD="$${BUILDDIR}/ssh-add"; \ |
| TEST_SSH_SSHKEYGEN="$${BUILDDIR}/ssh-keygen"; \ |
| TEST_SSH_SSHKEYSCAN="$${BUILDDIR}/ssh-keyscan"; \ |
| TEST_SSH_SFTP="$${BUILDDIR}/sftp"; \ |
| TEST_SSH_SFTPSERVER="$${BUILDDIR}/sftp-server"; \ |
| cd $(srcdir)/regress || exit $$?; \ |
| $(MAKE) \ |
| .OBJDIR="$${BUILDDIR}/regress" \ |
| .CURDIR="`pwd`" \ |
| BUILDDIR="$${BUILDDIR}" \ |
| OBJ="$${BUILDDIR}/regress/" \ |
| PATH="$${BUILDDIR}:$${PATH}" \ |
| TEST_SHELL="$${TEST_SHELL}" \ |
| TEST_SSH_SSH="$${TEST_SSH_SSH}" \ |
| TEST_SSH_SSHD="$${TEST_SSH_SSHD}" \ |
| TEST_SSH_SSHAGENT="$${TEST_SSH_SSHAGENT}" \ |
| TEST_SSH_SSHADD="$${TEST_SSH_SSHADD}" \ |
| TEST_SSH_SSHKEYGEN="$${TEST_SSH_SSHKEYGEN}" \ |
| TEST_SSH_SSHKEYSCAN="$${TEST_SSH_SSHKEYSCAN}" \ |
| TEST_SSH_SFTP="$${TEST_SSH_SFTP}" \ |
| TEST_SSH_SFTPSERVER="$${TEST_SSH_SFTPSERVER}" \ |
| EXEEXT="$(EXEEXT)" \ |
| $@ |
| |
| compat-tests: $(LIBCOMPAT) |
| (cd openbsd-compat/regress && $(MAKE)) |
| |
| regressclean: |
| if [ -f regress/Makefile ] && [ -r regress/Makefile ]; then \ |
| (cd regress && $(MAKE) clean) \ |
| fi |
| |
| survey: survey.sh ssh |
| @$(SHELL) ./survey.sh > survey |
| @echo 'The survey results have been placed in the file "survey" in the' |
| @echo 'current directory. Please review the file then send with' |
| @echo '"make send-survey".' |
| |
| send-survey: survey |
| mail portable-survey@mindrot.org <survey |
| |
| package: $(CONFIGFILES) ssh_prng_cmds.out $(MANPAGES) $(TARGETS) |
| if [ "@MAKE_PACKAGE_SUPPORTED@" = yes ]; then \ |
| sh buildpkg.sh; \ |
| fi |
| |