contrib/cygwin/ssh-host-config

#!/bin/sh
#
# ssh-host-config, Copyright 2000, Red Hat Inc.
#
# This file is part of the Cygwin port of OpenSSH.

# Subdirectory where the new package is being installed
PREFIX=/usr

# Directory where the config files are stored
SYSCONFDIR=/etc

# Subdirectory where an old package might be installed
OLDPREFIX=/usr/local
OLDSYSCONFDIR=${OLDPREFIX}/etc

progname=$0
auto_answer=""
port_number=22

request()
{
  if [ "${auto_answer}" = "yes" ]
  then
    return 0
  elif [ "${auto_answer}" = "no" ]
  then
    return 1
  fi

  answer=""
  while [ "X${answer}" != "Xyes" -a "X${answer}" != "Xno" ]
  do
    echo -n "$1 (yes/no) "
    read answer
  done
  if [ "X${answer}" = "Xyes" ]
  then
    return 0
  else
    return 1
  fi
}

# Check options

while :
do
  case $# in
  0)
    break
    ;;
  esac

  option=$1
  shift

  case "$option" in
  -d | --debug )
    set -x
    ;;

  -y | --yes )
    auto_answer=yes
    ;;

  -n | --no )
    auto_answer=no
    ;;

  -p | --port )
    port_number=$1
    shift
    ;;

  *)
    echo "usage: ${progname} [OPTION]..."
    echo
    echo "This script creates an OpenSSH host configuration."
    echo
    echo "Options:"
    echo "    --debug  -d     Enable shell's debug output."
    echo "    --yes    -y     Answer all questions with \"yes\" automatically."
    echo "    --no     -n     Answer all questions with \"no\" automatically."
    echo "    --port   -p <n> sshd listens on port n."
    echo
    exit 1
    ;;

  esac
done

# Check for running ssh/sshd processes first. Refuse to do anything while
# some ssh processes are still running

if ps -ef | grep -v grep | grep -q ssh
then
  echo
  echo "There are still ssh processes running. Please shut them down first."
  echo
  exit 1
fi

# Check for ${SYSCONFDIR} directory

if [ -e "${SYSCONFDIR}" -a ! -d "${SYSCONFDIR}" ]
then
  echo
  echo "${SYSCONFDIR} is existant but not a directory."
  echo "Cannot create global configuration files."
  echo
  exit 1
fi

# Create it if necessary

if [ ! -e "${SYSCONFDIR}" ]
then
  mkdir "${SYSCONFDIR}"
  if [ ! -e "${SYSCONFDIR}" ]
  then
    echo
    echo "Creating ${SYSCONFDIR} directory failed"
    echo
    exit 1
  fi
fi

# Check for an old installation in ${OLDPREFIX} unless ${OLDPREFIX} isn't
# the same as ${PREFIX}

old_install=0
if [ "${OLDPREFIX}" != "${PREFIX}" ]
then
  if [ -f "${OLDPREFIX}/sbin/sshd" ]
  then
    echo
    echo "You seem to have an older installation in ${OLDPREFIX}."
    echo
    # Check if old global configuration files exist
    if [ -f "${OLDSYSCONFDIR}/ssh_host_key" ]
    then
      if request "Do you want to copy your config files to your new installation?"
      then
        cp -f ${OLDSYSCONFDIR}/ssh_host_key ${SYSCONFDIR}
        cp -f ${OLDSYSCONFDIR}/ssh_host_key.pub ${SYSCONFDIR}
        cp -f ${OLDSYSCONFDIR}/ssh_host_dsa_key ${SYSCONFDIR}
        cp -f ${OLDSYSCONFDIR}/ssh_host_dsa_key.pub ${SYSCONFDIR}
        cp -f ${OLDSYSCONFDIR}/ssh_config ${SYSCONFDIR}
        cp -f ${OLDSYSCONFDIR}/sshd_config ${SYSCONFDIR}
      fi
    fi
    if request "Do you want to erase your old installation?"
    then
      rm -f ${OLDPREFIX}/bin/ssh.exe
      rm -f ${OLDPREFIX}/bin/ssh-config
      rm -f ${OLDPREFIX}/bin/scp.exe
      rm -f ${OLDPREFIX}/bin/ssh-add.exe
      rm -f ${OLDPREFIX}/bin/ssh-agent.exe
      rm -f ${OLDPREFIX}/bin/ssh-keygen.exe
      rm -f ${OLDPREFIX}/bin/slogin
      rm -f ${OLDSYSCONFDIR}/ssh_host_key
      rm -f ${OLDSYSCONFDIR}/ssh_host_key.pub
      rm -f ${OLDSYSCONFDIR}/ssh_host_dsa_key
      rm -f ${OLDSYSCONFDIR}/ssh_host_dsa_key.pub
      rm -f ${OLDSYSCONFDIR}/ssh_config
      rm -f ${OLDSYSCONFDIR}/sshd_config
      rm -f ${OLDPREFIX}/man/man1/ssh.1
      rm -f ${OLDPREFIX}/man/man1/scp.1
      rm -f ${OLDPREFIX}/man/man1/ssh-add.1
      rm -f ${OLDPREFIX}/man/man1/ssh-agent.1
      rm -f ${OLDPREFIX}/man/man1/ssh-keygen.1
      rm -f ${OLDPREFIX}/man/man1/slogin.1
      rm -f ${OLDPREFIX}/man/man8/sshd.8
      rm -f ${OLDPREFIX}/sbin/sshd.exe
      rm -f ${OLDPREFIX}/sbin/sftp-server.exe
    fi
    old_install=1
  fi
fi

# First generate host keys if not already existing

if [ ! -f "${SYSCONFDIR}/ssh_host_key" ]
then
  echo "Generating ${SYSCONFDIR}/ssh_host_key"
  ssh-keygen -t rsa1 -f ${SYSCONFDIR}/ssh_host_key -N '' > /dev/null
fi

if [ ! -f "${SYSCONFDIR}/ssh_host_rsa_key" ]
then
  echo "Generating ${SYSCONFDIR}/ssh_host_rsa_key"
  ssh-keygen -t rsa -f ${SYSCONFDIR}/ssh_host_rsa_key -N '' > /dev/null
fi

if [ ! -f "${SYSCONFDIR}/ssh_host_dsa_key" ]
then
  echo "Generating ${SYSCONFDIR}/ssh_host_dsa_key"
  ssh-keygen -t dsa -f ${SYSCONFDIR}/ssh_host_dsa_key -N '' > /dev/null
fi

# Check if ssh_config exists. If yes, ask for overwriting

if [ -f "${SYSCONFDIR}/ssh_config" ]
then
  if request "Overwrite existing ${SYSCONFDIR}/ssh_config file?"
  then
    rm -f "${SYSCONFDIR}/ssh_config"
    if [ -f "${SYSCONFDIR}/ssh_config" ]
    then
      echo "Can't overwrite. ${SYSCONFDIR}/ssh_config is write protected."
    fi
  fi
fi

# Create default ssh_config from here script

if [ ! -f "${SYSCONFDIR}/ssh_config" ]
then
  echo "Generating ${SYSCONFDIR}/ssh_config file"
  cat > ${SYSCONFDIR}/ssh_config << EOF
# This is ssh client systemwide configuration file.  This file provides 
# defaults for users, and the values can be changed in per-user configuration
# files or on the command line.

# Configuration data is parsed as follows:
#  1. command line options
#  2. user-specific file
#  3. system-wide file
# Any configuration value is only changed the first time it is set.
# Thus, host-specific definitions should be at the beginning of the
# configuration file, and defaults at the end.

# Site-wide defaults for various options

# Host *
#   ForwardAgent yes
#   ForwardX11 yes
#   RhostsAuthentication yes
#   RhostsRSAAuthentication yes
#   RSAAuthentication yes
#   PasswordAuthentication yes
#   FallBackToRsh no
#   UseRsh no
#   BatchMode no
#   CheckHostIP yes
#   StrictHostKeyChecking no
#   Port 22
#   Protocol 2,1
#   Cipher 3des
#   EscapeChar ~

# Be paranoid by default
Host *
        ForwardAgent no
        ForwardX11 no
        FallBackToRsh no

# Try authentification with the following identities
        IdentityFile ~/.ssh/identity
        IdentityFile ~/.ssh/id_rsa
        IdentityFile ~/.ssh/id_dsa
EOF
  if [ "$port_number" != "22" ]
  then
    echo "Host localhost" >> ${SYSCONFDIR}/ssh_config
    echo "    Port $port_number" >> ${SYSCONFDIR}/ssh_config
  fi
fi

# Check if sshd_config exists. If yes, ask for overwriting

if [ -f "${SYSCONFDIR}/sshd_config" ]
then
  if request "Overwrite existing ${SYSCONFDIR}/sshd_config file?"
  then
    rm -f "${SYSCONFDIR}/sshd_config"
    if [ -f "${SYSCONFDIR}/sshd_config" ]
    then
      echo "Can't overwrite. ${SYSCONFDIR}/sshd_config is write protected."
    fi
  fi
fi

# Create default sshd_config from here script

if [ ! -f "${SYSCONFDIR}/sshd_config" ]
then
  echo "Generating ${SYSCONFDIR}/sshd_config file"
  cat > ${SYSCONFDIR}/sshd_config << EOF
# This is ssh server systemwide configuration file.

Port $port_number
#
Protocol 2,1
ListenAddress 0.0.0.0
#ListenAddress ::
#
# Uncomment the following lines according to the used authentication
HostKey /etc/ssh_host_key
HostKey /etc/ssh_host_rsa_key
HostKey /etc/ssh_host_dsa_key
ServerKeyBits 768
LoginGraceTime 600
KeyRegenerationInterval 3600
PermitRootLogin yes
#
# Don't read ~/.rhosts and ~/.shosts files
IgnoreRhosts yes
# Uncomment if you don't trust ~/.ssh/known_hosts for RhostsRSAAuthentication
#IgnoreUserKnownHosts yes
StrictModes yes
X11Forwarding no
X11DisplayOffset 10
PrintMotd yes
KeepAlive yes

# Logging
SyslogFacility AUTH
LogLevel INFO
#obsoletes QuietMode and FascistLogging

RhostsAuthentication no
#
# For this to work you will also need host keys in /etc/ssh_known_hosts
RhostsRSAAuthentication no

# To install for logon to different user accounts change to "no" here
RSAAuthentication yes

# To install for logon to different user accounts change to "yes" here
PasswordAuthentication no

PermitEmptyPasswords no

CheckMail no
UseLogin no

#Uncomment if you want to enable sftp
#Subsystem      sftp    /usr/sbin/sftp-server
#MaxStartups 10:30:60
EOF
fi

# Care for services file
_sys="`uname -a`"
_nt=`expr "$_sys" : "CYGWIN_NT"`
if [ $_nt -gt 0 ]
then
  _wservices="${SYSTEMROOT}\\system32\\drivers\\etc\\services"
  _wserv_tmp="${SYSTEMROOT}\\system32\\drivers\\etc\\srv.out.$$"
else
  _wservices="${WINDIR}\\SERVICES"
  _wserv_tmp="${WINDIR}\\SERV.$$"
fi
_services=`cygpath -u "${_wservices}"`
_serv_tmp=`cygpath -u "${_wserv_tmp}"`

mount -t -f "${_wservices}" "${_services}"
mount -t -f "${_wserv_tmp}" "${_serv_tmp}"

# Remove sshd 22/port from services
if [ `grep -q 'sshd[ \t][ \t]*22' "${_services}"; echo $?` -eq 0 ]
then
  grep -v 'sshd[ \t][ \t]*22' "${_services}" > "${_serv_tmp}"
  if [ -f "${_serv_tmp}" ]
  then 
    if mv "${_serv_tmp}" "${_services}"
    then
      echo "Removing sshd from ${_services}"
    else
      echo "Removing sshd from ${_services} failed\!"
    fi 
    rm -f "${_serv_tmp}"
  else
    echo "Removing sshd from ${_services} failed\!"
  fi
fi

# Add ssh 22/tcp  and ssh 22/udp to services
if [ `grep -q 'ssh[ \t][ \t]*22' "${_services}"; echo $?` -ne 0 ]
then
  awk '{ if ( $2 ~ /^23\/tcp/ ) print "ssh                22/tcp                           #SSH Remote Login Protocol\nssh                22/udp                           #SSH Remote Login Protocol"; print $0; }' < "${_services}" > "${_serv_tmp}"
  if [ -f "${_serv_tmp}" ]
  then
    if mv "${_serv_tmp}" "${_services}"
    then
      echo "Added ssh to ${_services}"
    else
      echo "Adding ssh to ${_services} failed\!"
    fi
    rm -f "${_serv_tmp}"
  else
    echo "Adding ssh to ${_services} failed\!"
  fi
fi

umount "${_services}"
umount "${_serv_tmp}"

# Care for inetd.conf file
_inetcnf="/etc/inetd.conf"
_inetcnf_tmp="/etc/inetd.conf.$$"

if [ -f "${_inetcnf}" ]
then
  # Check if ssh service is already in use as sshd
  with_comment=1
  grep -q '^[ \t]*sshd' "${_inetcnf}" && with_comment=0
  # Remove sshd line from inetd.conf
  if [ `grep -q '^[# \t]*sshd' "${_inetcnf}"; echo $?` -eq 0 ]
  then
    grep -v '^[# \t]*sshd' "${_inetcnf}" >> "${_inetcnf_tmp}"
    if [ -f "${_inetcnf_tmp}" ]
    then
      if mv "${_inetcnf_tmp}" "${_inetcnf}"
      then
        echo "Removed sshd from ${_inetcnf}"
      else
        echo "Removing sshd from ${_inetcnf} failed\!"
      fi
      rm -f "${_inetcnf_tmp}"
    else
      echo "Removing sshd from ${_inetcnf} failed\!"
    fi
  fi

  # Add ssh line to inetd.conf
  if [ `grep -q '^[# \t]*ssh' "${_inetcnf}"; echo $?` -ne 0 ]
  then
    if [ "${with_comment}" -eq 0 ]
    then
      echo 'ssh  stream  tcp     nowait  root    /usr/sbin/sshd -i' >> "${_inetcnf}"
    else
      echo '# ssh  stream  tcp     nowait  root    /usr/sbin/sshd -i' >> "${_inetcnf}"
    fi
    echo "Added ssh to ${_inetcnf}"
  fi
fi

if [ "${old_install}" = "1" ]
then
  echo
  echo "Note: If you have used sshd as service or from inetd, don't forget to"
  echo "      change the path to sshd.exe in the service entry or in inetd.conf."
fi

echo
echo "Host configuration finished. Have fun!"