blob: fd0cd0de0abfa37288c95dc104716fd3ef7135e0 [file] [log] [blame]
This document describes OpenSSH's support for U2F/FIDO security keys.
Background
----------
U2F is an open standard for two-factor authentication hardware, widely
used for user authentication to websites. U2F tokens are ubiquitous,
available from a number of manufacturers and are currently by far the
cheapest way for users to achieve hardware-backed credential storage.
The U2F protocol however cannot be trivially used as an SSH protocol key
type as both the inputs to the signature operation and the resultant
signature differ from those specified for SSH. For similar reasons,
integration of U2F devices cannot be achieved via the PKCS#11 API.
U2F also offers a number of features that are attractive in the context
of SSH authentication. They can be configured to require indication
of "user presence" for each signature operation (typically achieved
by requiring the user touch the key). They also offer an attestation
mechanism at key enrollment time that can be used to prove that a
given key is backed by hardware. Finally the signature format includes
a monotonic signature counter that can be used (at scale) to detect
concurrent use of a private key, should it be extracted from hardware.
U2F private keys are generated through an enrollment operation,
which takes an application ID - a URL-like string, typically "ssh:"
in this case, but a HTTP origin for the case of web authentication,
and a challenge string (typically randomly generated). The enrollment
operation returns a public key, a key handle that must be used to invoke
the hardware-backed private key, some flags and signed attestation
information that may be used to verify that a private key is hosted on a
particular hardware instance.
It is common for U2F hardware to derive private keys from the key handle
in conjunction with a small per-device secret that is unique to the
hardware, thus requiring little on-device storage for an effectively
unlimited number of supported keys. This drives the requirement that
the key handle be supplied for each signature operation. U2F tokens
primarily use ECDSA signatures in the NIST-P256 field, though the FIDO2
standard specifies additional key types, including one based on Ed25519.
SSH U2F Key formats
-------------------
OpenSSH integrates U2F as new key and corresponding certificate types:
sk-ecdsa-sha2-nistp256@openssh.com
sk-ecdsa-sha2-nistp256-cert-v01@openssh.com
sk-ssh-ed25519@openssh.com
sk-ssh-ed25519-cert-v01@openssh.com
While each uses ecdsa-sha256-nistp256 as the underlying signature primitive,
keys require extra information in the public and private keys, and in
the signature object itself. As such they cannot be made compatible with
the existing ecdsa-sha2-nistp* key types.
The format of a sk-ecdsa-sha2-nistp256@openssh.com public key is:
string "sk-ecdsa-sha2-nistp256@openssh.com"
string curve name
ec_point Q
string application (user-specified, but typically "ssh:")
The corresponding private key contains:
string "sk-ecdsa-sha2-nistp256@openssh.com"
string curve name
ec_point Q
string application (user-specified, but typically "ssh:")
uint8 flags
string key_handle
string reserved
The format of a sk-ssh-ed25519@openssh.com public key is:
string "sk-ssh-ed25519@openssh.com"
string public key
string application (user-specified, but typically "ssh:")
With a private half consisting of:
string "sk-ssh-ed25519@openssh.com"
string public key
string application (user-specified, but typically "ssh:")
uint8 flags
string key_handle
string reserved
The certificate form for SSH U2F keys appends the usual certificate
information to the public key:
string "sk-ecdsa-sha2-nistp256-cert-v01@openssh.com"
string nonce
string curve name
ec_point Q
string application
uint64 serial
uint32 type
string key id
string valid principals
uint64 valid after
uint64 valid before
string critical options
string extensions
string reserved
string signature key
string signature
and for security key ed25519 certificates:
string "sk-ssh-ed25519-cert-v01@openssh.com"
string nonce
string public key
string application
uint64 serial
uint32 type
string key id
string valid principals
uint64 valid after
uint64 valid before
string critical options
string extensions
string reserved
string signature key
string signature
Both security key certificates use the following encoding for private keys:
string type (e.g. "sk-ssh-ed25519-cert-v01@openssh.com")
string pubkey (the above key/cert structure)
string application
uint8 flags
string key_handle
string reserved
During key generation, the hardware also returns attestation information
that may be used to cryptographically prove that a given key is
hardware-backed. Unfortunately, the protocol required for this proof is
not privacy-preserving and may be used to identify U2F tokens with at
least manufacturer and batch number granularity. For this reason, we
choose not to include this information in the public key or save it by
default.
Attestation information is very useful however in an organisational
context, where it may be used by a CA as part of certificate
issuance. In this case, exposure to the CA of hardware identity is
desirable. To support this case, OpenSSH optionally allows retaining the
attestation information at the time of key generation. It will take the
following format:
string "sk-attest-v00"
uint32 version (1 for U2F, 2 for FIDO2 in future)
string attestation certificate
string enrollment signature
SSH U2F signatures
------------------
In addition to the message to be signed, the U2F signature operation
requires the key handle and a few additional parameters. The signature
is signed over a blob that consists of:
byte[32] SHA256(application)
byte flags (including "user present", extensions present)
uint32 counter
byte[] extensions
byte[32] SHA256(message)
No extensons are yet defined for SSH use. If any are defined in the future,
it will be possible to infer their presence from the contents of the "flags"
value.
The signature returned from U2F hardware takes the following format:
byte flags (including "user present")
uint32 counter
byte[] ecdsa_signature (in X9.62 format).
For use in the SSH protocol, we wish to avoid server-side parsing of ASN.1
format data in the pre-authentication attack surface. Therefore, the
signature format used on the wire in SSH2_USERAUTH_REQUEST packets will
be reformatted to better match the existing signature encoding:
string "sk-ecdsa-sha2-nistp256@openssh.com"
string ecdsa_signature
byte flags
uint32 counter
Where the "ecdsa_signature" field follows the RFC5656 ECDSA signature
encoding:
mpint r
mpint s
For Ed25519 keys the signature is encoded as:
string "sk-ssh-ed25519@openssh.com"
string signature
byte flags
uint32 counter
ssh-agent protocol extensions
-----------------------------
ssh-agent requires a protocol extension to support U2F keys. At
present the closest analogue to Security Keys in ssh-agent are PKCS#11
tokens, insofar as they require a middleware library to communicate with
the device that holds the keys. Unfortunately, the protocol message used
to add PKCS#11 keys to ssh-agent does not include any way to send the
key handle to the agent as U2F keys require.
To avoid this, without having to add wholly new messages to the agent
protocol, we will use the existing SSH2_AGENTC_ADD_ID_CONSTRAINED message
with a new key constraint extension to encode a path to the middleware
library for the key. The format of this constraint extension would be:
byte SSH_AGENT_CONSTRAIN_EXTENSION
string sk-provider@openssh.com
string middleware path
This constraint-based approach does not present any compatibility
problems.
OpenSSH integration
-------------------
U2F tokens may be attached via a number of means, including USB and NFC.
The USB interface is standardised around a HID protocol, but we want to
be able to support other transports as well as dummy implementations for
regress testing. For this reason, OpenSSH shall support a dynamically-
loaded middleware libraries to communicate with security keys, but offer
support for the common case of USB HID security keys internally.
The middleware library need only expose a handful of functions:
#define SSH_SK_VERSION_MAJOR 0x00040000 /* API version */
#define SSH_SK_VERSION_MAJOR_MASK 0xffff0000
/* Flags */
#define SSH_SK_USER_PRESENCE_REQD 0x01
#define SSH_SK_USER_VERIFICATION_REQD 0x04
#define SSH_SK_RESIDENT_KEY 0x20
/* Algs */
#define SSH_SK_ECDSA 0x00
#define SSH_SK_ED25519 0x01
/* Error codes */
#define SSH_SK_ERR_GENERAL -1
#define SSH_SK_ERR_UNSUPPORTED -2
#define SSH_SK_ERR_PIN_REQUIRED -3
struct sk_enroll_response {
uint8_t *public_key;
size_t public_key_len;
uint8_t *key_handle;
size_t key_handle_len;
uint8_t *signature;
size_t signature_len;
uint8_t *attestation_cert;
size_t attestation_cert_len;
};
struct sk_sign_response {
uint8_t flags;
uint32_t counter;
uint8_t *sig_r;
size_t sig_r_len;
uint8_t *sig_s;
size_t sig_s_len;
};
struct sk_resident_key {
uint32_t alg;
size_t slot;
char *application;
struct sk_enroll_response key;
};
struct sk_option {
char *name;
char *value;
uint8_t important;
};
/* Return the version of the middleware API */
uint32_t sk_api_version(void);
/* Enroll a U2F key (private key generation) */
int sk_enroll(uint32_t alg,
const uint8_t *challenge, size_t challenge_len,
const char *application, uint8_t flags, const char *pin,
struct sk_option **options,
struct sk_enroll_response **enroll_response);
/* Sign a challenge */
int sk_sign(uint32_t alg, const uint8_t *message, size_t message_len,
const char *application,
const uint8_t *key_handle, size_t key_handle_len,
uint8_t flags, const char *pin, struct sk_option **options,
struct sk_sign_response **sign_response);
/* Enumerate all resident keys */
int sk_load_resident_keys(const char *pin, struct sk_option **options,
struct sk_resident_key ***rks, size_t *nrks);
The SSH_SK_VERSION_MAJOR should be incremented for each incompatible
API change.
The options may be used to pass miscellaneous options to the middleware
as a NULL-terminated array of pointers to struct sk_option. The middleware
may ignore unsupported or unknown options unless the "important" flag is
set, in which case it should return failure if an unsupported option is
requested.
At present the following options names are supported:
"device"
Specifies a specific FIDO device on which to perform the
operation. The value in this field is interpreted by the
middleware but it would be typical to specify a path to
a /dev node for the device in question.
"user"
Specifies the FIDO2 username used when enrolling a key,
overriding OpenSSH's default of using an all-zero username.
In OpenSSH, the middleware will be invoked by using a similar mechanism to
ssh-pkcs11-helper to provide address-space containment of the
middleware from ssh-agent.