Greg Hartman | bd77cf7 | 2015-02-25 13:21:06 -0800 | [diff] [blame^] | 1 | /* $OpenBSD: packet.c,v 1.173 2011/05/06 21:14:05 djm Exp $ */ |
| 2 | /* |
| 3 | * Author: Tatu Ylonen <ylo@cs.hut.fi> |
| 4 | * Copyright (c) 1995 Tatu Ylonen <ylo@cs.hut.fi>, Espoo, Finland |
| 5 | * All rights reserved |
| 6 | * This file contains code implementing the packet protocol and communication |
| 7 | * with the other side. This same code is used both on client and server side. |
| 8 | * |
| 9 | * As far as I am concerned, the code I have written for this software |
| 10 | * can be used freely for any purpose. Any derived versions of this |
| 11 | * software must be clearly marked as such, and if the derived work is |
| 12 | * incompatible with the protocol description in the RFC file, it must be |
| 13 | * called by a name other than "ssh" or "Secure Shell". |
| 14 | * |
| 15 | * |
| 16 | * SSH2 packet format added by Markus Friedl. |
| 17 | * Copyright (c) 2000, 2001 Markus Friedl. All rights reserved. |
| 18 | * |
| 19 | * Redistribution and use in source and binary forms, with or without |
| 20 | * modification, are permitted provided that the following conditions |
| 21 | * are met: |
| 22 | * 1. Redistributions of source code must retain the above copyright |
| 23 | * notice, this list of conditions and the following disclaimer. |
| 24 | * 2. Redistributions in binary form must reproduce the above copyright |
| 25 | * notice, this list of conditions and the following disclaimer in the |
| 26 | * documentation and/or other materials provided with the distribution. |
| 27 | * |
| 28 | * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR |
| 29 | * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES |
| 30 | * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. |
| 31 | * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, |
| 32 | * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT |
| 33 | * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| 34 | * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| 35 | * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| 36 | * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF |
| 37 | * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| 38 | */ |
| 39 | |
| 40 | #include "includes.h" |
| 41 | |
| 42 | #include <sys/types.h> |
| 43 | #include "openbsd-compat/sys-queue.h" |
| 44 | #include <sys/param.h> |
| 45 | #include <sys/socket.h> |
| 46 | #ifdef HAVE_SYS_TIME_H |
| 47 | # include <sys/time.h> |
| 48 | #endif |
| 49 | |
| 50 | #include <netinet/in.h> |
| 51 | #include <netinet/ip.h> |
| 52 | #include <arpa/inet.h> |
| 53 | |
| 54 | #include <errno.h> |
| 55 | #include <stdarg.h> |
| 56 | #include <stdio.h> |
| 57 | #include <stdlib.h> |
| 58 | #include <string.h> |
| 59 | #include <unistd.h> |
| 60 | #include <signal.h> |
| 61 | |
| 62 | #include "xmalloc.h" |
| 63 | #include "buffer.h" |
| 64 | #include "packet.h" |
| 65 | #include "crc32.h" |
| 66 | #include "compress.h" |
| 67 | #include "deattack.h" |
| 68 | #include "channels.h" |
| 69 | #include "compat.h" |
| 70 | #include "ssh1.h" |
| 71 | #include "ssh2.h" |
| 72 | #include "cipher.h" |
| 73 | #include "key.h" |
| 74 | #include "kex.h" |
| 75 | #include "mac.h" |
| 76 | #include "log.h" |
| 77 | #include "canohost.h" |
| 78 | #include "misc.h" |
| 79 | #include "ssh.h" |
| 80 | #include "roaming.h" |
| 81 | |
| 82 | #ifdef PACKET_DEBUG |
| 83 | #define DBG(x) x |
| 84 | #else |
| 85 | #define DBG(x) |
| 86 | #endif |
| 87 | |
| 88 | #define PACKET_MAX_SIZE (256 * 1024) |
| 89 | |
| 90 | struct packet_state { |
| 91 | u_int32_t seqnr; |
| 92 | u_int32_t packets; |
| 93 | u_int64_t blocks; |
| 94 | u_int64_t bytes; |
| 95 | }; |
| 96 | |
| 97 | struct packet { |
| 98 | TAILQ_ENTRY(packet) next; |
| 99 | u_char type; |
| 100 | Buffer payload; |
| 101 | }; |
| 102 | |
| 103 | struct session_state { |
| 104 | /* |
| 105 | * This variable contains the file descriptors used for |
| 106 | * communicating with the other side. connection_in is used for |
| 107 | * reading; connection_out for writing. These can be the same |
| 108 | * descriptor, in which case it is assumed to be a socket. |
| 109 | */ |
| 110 | int connection_in; |
| 111 | int connection_out; |
| 112 | |
| 113 | /* Protocol flags for the remote side. */ |
| 114 | u_int remote_protocol_flags; |
| 115 | |
| 116 | /* Encryption context for receiving data. Only used for decryption. */ |
| 117 | CipherContext receive_context; |
| 118 | |
| 119 | /* Encryption context for sending data. Only used for encryption. */ |
| 120 | CipherContext send_context; |
| 121 | |
| 122 | /* Buffer for raw input data from the socket. */ |
| 123 | Buffer input; |
| 124 | |
| 125 | /* Buffer for raw output data going to the socket. */ |
| 126 | Buffer output; |
| 127 | |
| 128 | /* Buffer for the partial outgoing packet being constructed. */ |
| 129 | Buffer outgoing_packet; |
| 130 | |
| 131 | /* Buffer for the incoming packet currently being processed. */ |
| 132 | Buffer incoming_packet; |
| 133 | |
| 134 | /* Scratch buffer for packet compression/decompression. */ |
| 135 | Buffer compression_buffer; |
| 136 | int compression_buffer_ready; |
| 137 | |
| 138 | /* |
| 139 | * Flag indicating whether packet compression/decompression is |
| 140 | * enabled. |
| 141 | */ |
| 142 | int packet_compression; |
| 143 | |
| 144 | /* default maximum packet size */ |
| 145 | u_int max_packet_size; |
| 146 | |
| 147 | /* Flag indicating whether this module has been initialized. */ |
| 148 | int initialized; |
| 149 | |
| 150 | /* Set to true if the connection is interactive. */ |
| 151 | int interactive_mode; |
| 152 | |
| 153 | /* Set to true if we are the server side. */ |
| 154 | int server_side; |
| 155 | |
| 156 | /* Set to true if we are authenticated. */ |
| 157 | int after_authentication; |
| 158 | |
| 159 | int keep_alive_timeouts; |
| 160 | |
| 161 | /* The maximum time that we will wait to send or receive a packet */ |
| 162 | int packet_timeout_ms; |
| 163 | |
| 164 | /* Session key information for Encryption and MAC */ |
| 165 | Newkeys *newkeys[MODE_MAX]; |
| 166 | struct packet_state p_read, p_send; |
| 167 | |
| 168 | u_int64_t max_blocks_in, max_blocks_out; |
| 169 | u_int32_t rekey_limit; |
| 170 | |
| 171 | /* Session key for protocol v1 */ |
| 172 | u_char ssh1_key[SSH_SESSION_KEY_LENGTH]; |
| 173 | u_int ssh1_keylen; |
| 174 | |
| 175 | /* roundup current message to extra_pad bytes */ |
| 176 | u_char extra_pad; |
| 177 | |
| 178 | /* XXX discard incoming data after MAC error */ |
| 179 | u_int packet_discard; |
| 180 | Mac *packet_discard_mac; |
| 181 | |
| 182 | /* Used in packet_read_poll2() */ |
| 183 | u_int packlen; |
| 184 | |
| 185 | /* Used in packet_send2 */ |
| 186 | int rekeying; |
| 187 | |
| 188 | /* Used in packet_set_interactive */ |
| 189 | int set_interactive_called; |
| 190 | |
| 191 | /* Used in packet_set_maxsize */ |
| 192 | int set_maxsize_called; |
| 193 | |
| 194 | TAILQ_HEAD(, packet) outgoing; |
| 195 | }; |
| 196 | |
| 197 | static struct session_state *active_state, *backup_state; |
| 198 | |
| 199 | static struct session_state * |
| 200 | alloc_session_state(void) |
| 201 | { |
| 202 | struct session_state *s = xcalloc(1, sizeof(*s)); |
| 203 | |
| 204 | s->connection_in = -1; |
| 205 | s->connection_out = -1; |
| 206 | s->max_packet_size = 32768; |
| 207 | s->packet_timeout_ms = -1; |
| 208 | return s; |
| 209 | } |
| 210 | |
| 211 | /* |
| 212 | * Sets the descriptors used for communication. Disables encryption until |
| 213 | * packet_set_encryption_key is called. |
| 214 | */ |
| 215 | void |
| 216 | packet_set_connection(int fd_in, int fd_out) |
| 217 | { |
| 218 | Cipher *none = cipher_by_name("none"); |
| 219 | |
| 220 | if (none == NULL) |
| 221 | fatal("packet_set_connection: cannot load cipher 'none'"); |
| 222 | if (active_state == NULL) |
| 223 | active_state = alloc_session_state(); |
| 224 | active_state->connection_in = fd_in; |
| 225 | active_state->connection_out = fd_out; |
| 226 | cipher_init(&active_state->send_context, none, (const u_char *)"", |
| 227 | 0, NULL, 0, CIPHER_ENCRYPT); |
| 228 | cipher_init(&active_state->receive_context, none, (const u_char *)"", |
| 229 | 0, NULL, 0, CIPHER_DECRYPT); |
| 230 | active_state->newkeys[MODE_IN] = active_state->newkeys[MODE_OUT] = NULL; |
| 231 | if (!active_state->initialized) { |
| 232 | active_state->initialized = 1; |
| 233 | buffer_init(&active_state->input); |
| 234 | buffer_init(&active_state->output); |
| 235 | buffer_init(&active_state->outgoing_packet); |
| 236 | buffer_init(&active_state->incoming_packet); |
| 237 | TAILQ_INIT(&active_state->outgoing); |
| 238 | active_state->p_send.packets = active_state->p_read.packets = 0; |
| 239 | } |
| 240 | } |
| 241 | |
| 242 | void |
| 243 | packet_set_timeout(int timeout, int count) |
| 244 | { |
| 245 | if (timeout == 0 || count == 0) { |
| 246 | active_state->packet_timeout_ms = -1; |
| 247 | return; |
| 248 | } |
| 249 | if ((INT_MAX / 1000) / count < timeout) |
| 250 | active_state->packet_timeout_ms = INT_MAX; |
| 251 | else |
| 252 | active_state->packet_timeout_ms = timeout * count * 1000; |
| 253 | } |
| 254 | |
| 255 | static void |
| 256 | packet_stop_discard(void) |
| 257 | { |
| 258 | if (active_state->packet_discard_mac) { |
| 259 | char buf[1024]; |
| 260 | |
| 261 | memset(buf, 'a', sizeof(buf)); |
| 262 | while (buffer_len(&active_state->incoming_packet) < |
| 263 | PACKET_MAX_SIZE) |
| 264 | buffer_append(&active_state->incoming_packet, buf, |
| 265 | sizeof(buf)); |
| 266 | (void) mac_compute(active_state->packet_discard_mac, |
| 267 | active_state->p_read.seqnr, |
| 268 | buffer_ptr(&active_state->incoming_packet), |
| 269 | PACKET_MAX_SIZE); |
| 270 | } |
| 271 | logit("Finished discarding for %.200s", get_remote_ipaddr()); |
| 272 | cleanup_exit(255); |
| 273 | } |
| 274 | |
| 275 | static void |
| 276 | packet_start_discard(Enc *enc, Mac *mac, u_int packet_length, u_int discard) |
| 277 | { |
| 278 | if (enc == NULL || !cipher_is_cbc(enc->cipher)) |
| 279 | packet_disconnect("Packet corrupt"); |
| 280 | if (packet_length != PACKET_MAX_SIZE && mac && mac->enabled) |
| 281 | active_state->packet_discard_mac = mac; |
| 282 | if (buffer_len(&active_state->input) >= discard) |
| 283 | packet_stop_discard(); |
| 284 | active_state->packet_discard = discard - |
| 285 | buffer_len(&active_state->input); |
| 286 | } |
| 287 | |
| 288 | /* Returns 1 if remote host is connected via socket, 0 if not. */ |
| 289 | |
| 290 | int |
| 291 | packet_connection_is_on_socket(void) |
| 292 | { |
| 293 | struct sockaddr_storage from, to; |
| 294 | socklen_t fromlen, tolen; |
| 295 | |
| 296 | /* filedescriptors in and out are the same, so it's a socket */ |
| 297 | if (active_state->connection_in == active_state->connection_out) |
| 298 | return 1; |
| 299 | fromlen = sizeof(from); |
| 300 | memset(&from, 0, sizeof(from)); |
| 301 | if (getpeername(active_state->connection_in, (struct sockaddr *)&from, |
| 302 | &fromlen) < 0) |
| 303 | return 0; |
| 304 | tolen = sizeof(to); |
| 305 | memset(&to, 0, sizeof(to)); |
| 306 | if (getpeername(active_state->connection_out, (struct sockaddr *)&to, |
| 307 | &tolen) < 0) |
| 308 | return 0; |
| 309 | if (fromlen != tolen || memcmp(&from, &to, fromlen) != 0) |
| 310 | return 0; |
| 311 | if (from.ss_family != AF_INET && from.ss_family != AF_INET6) |
| 312 | return 0; |
| 313 | return 1; |
| 314 | } |
| 315 | |
| 316 | /* |
| 317 | * Exports an IV from the CipherContext required to export the key |
| 318 | * state back from the unprivileged child to the privileged parent |
| 319 | * process. |
| 320 | */ |
| 321 | |
| 322 | void |
| 323 | packet_get_keyiv(int mode, u_char *iv, u_int len) |
| 324 | { |
| 325 | CipherContext *cc; |
| 326 | |
| 327 | if (mode == MODE_OUT) |
| 328 | cc = &active_state->send_context; |
| 329 | else |
| 330 | cc = &active_state->receive_context; |
| 331 | |
| 332 | cipher_get_keyiv(cc, iv, len); |
| 333 | } |
| 334 | |
| 335 | int |
| 336 | packet_get_keycontext(int mode, u_char *dat) |
| 337 | { |
| 338 | CipherContext *cc; |
| 339 | |
| 340 | if (mode == MODE_OUT) |
| 341 | cc = &active_state->send_context; |
| 342 | else |
| 343 | cc = &active_state->receive_context; |
| 344 | |
| 345 | return (cipher_get_keycontext(cc, dat)); |
| 346 | } |
| 347 | |
| 348 | void |
| 349 | packet_set_keycontext(int mode, u_char *dat) |
| 350 | { |
| 351 | CipherContext *cc; |
| 352 | |
| 353 | if (mode == MODE_OUT) |
| 354 | cc = &active_state->send_context; |
| 355 | else |
| 356 | cc = &active_state->receive_context; |
| 357 | |
| 358 | cipher_set_keycontext(cc, dat); |
| 359 | } |
| 360 | |
| 361 | int |
| 362 | packet_get_keyiv_len(int mode) |
| 363 | { |
| 364 | CipherContext *cc; |
| 365 | |
| 366 | if (mode == MODE_OUT) |
| 367 | cc = &active_state->send_context; |
| 368 | else |
| 369 | cc = &active_state->receive_context; |
| 370 | |
| 371 | return (cipher_get_keyiv_len(cc)); |
| 372 | } |
| 373 | |
| 374 | void |
| 375 | packet_set_iv(int mode, u_char *dat) |
| 376 | { |
| 377 | CipherContext *cc; |
| 378 | |
| 379 | if (mode == MODE_OUT) |
| 380 | cc = &active_state->send_context; |
| 381 | else |
| 382 | cc = &active_state->receive_context; |
| 383 | |
| 384 | cipher_set_keyiv(cc, dat); |
| 385 | } |
| 386 | |
| 387 | int |
| 388 | packet_get_ssh1_cipher(void) |
| 389 | { |
| 390 | return (cipher_get_number(active_state->receive_context.cipher)); |
| 391 | } |
| 392 | |
| 393 | void |
| 394 | packet_get_state(int mode, u_int32_t *seqnr, u_int64_t *blocks, |
| 395 | u_int32_t *packets, u_int64_t *bytes) |
| 396 | { |
| 397 | struct packet_state *state; |
| 398 | |
| 399 | state = (mode == MODE_IN) ? |
| 400 | &active_state->p_read : &active_state->p_send; |
| 401 | if (seqnr) |
| 402 | *seqnr = state->seqnr; |
| 403 | if (blocks) |
| 404 | *blocks = state->blocks; |
| 405 | if (packets) |
| 406 | *packets = state->packets; |
| 407 | if (bytes) |
| 408 | *bytes = state->bytes; |
| 409 | } |
| 410 | |
| 411 | void |
| 412 | packet_set_state(int mode, u_int32_t seqnr, u_int64_t blocks, u_int32_t packets, |
| 413 | u_int64_t bytes) |
| 414 | { |
| 415 | struct packet_state *state; |
| 416 | |
| 417 | state = (mode == MODE_IN) ? |
| 418 | &active_state->p_read : &active_state->p_send; |
| 419 | state->seqnr = seqnr; |
| 420 | state->blocks = blocks; |
| 421 | state->packets = packets; |
| 422 | state->bytes = bytes; |
| 423 | } |
| 424 | |
| 425 | static int |
| 426 | packet_connection_af(void) |
| 427 | { |
| 428 | struct sockaddr_storage to; |
| 429 | socklen_t tolen = sizeof(to); |
| 430 | |
| 431 | memset(&to, 0, sizeof(to)); |
| 432 | if (getsockname(active_state->connection_out, (struct sockaddr *)&to, |
| 433 | &tolen) < 0) |
| 434 | return 0; |
| 435 | if (to.ss_family == AF_INET) |
| 436 | return 1; |
| 437 | #ifdef IPV4_IN_IPV6 |
| 438 | if (to.ss_family == AF_INET6 && |
| 439 | IN6_IS_ADDR_V4MAPPED(&((struct sockaddr_in6 *)&to)->sin6_addr)) |
| 440 | return AF_INET; |
| 441 | #endif |
| 442 | return to.ss_family; |
| 443 | } |
| 444 | |
| 445 | /* Sets the connection into non-blocking mode. */ |
| 446 | |
| 447 | void |
| 448 | packet_set_nonblocking(void) |
| 449 | { |
| 450 | /* Set the socket into non-blocking mode. */ |
| 451 | set_nonblock(active_state->connection_in); |
| 452 | |
| 453 | if (active_state->connection_out != active_state->connection_in) |
| 454 | set_nonblock(active_state->connection_out); |
| 455 | } |
| 456 | |
| 457 | /* Returns the socket used for reading. */ |
| 458 | |
| 459 | int |
| 460 | packet_get_connection_in(void) |
| 461 | { |
| 462 | return active_state->connection_in; |
| 463 | } |
| 464 | |
| 465 | /* Returns the descriptor used for writing. */ |
| 466 | |
| 467 | int |
| 468 | packet_get_connection_out(void) |
| 469 | { |
| 470 | return active_state->connection_out; |
| 471 | } |
| 472 | |
| 473 | /* Closes the connection and clears and frees internal data structures. */ |
| 474 | |
| 475 | void |
| 476 | packet_close(void) |
| 477 | { |
| 478 | if (!active_state->initialized) |
| 479 | return; |
| 480 | active_state->initialized = 0; |
| 481 | if (active_state->connection_in == active_state->connection_out) { |
| 482 | shutdown(active_state->connection_out, SHUT_RDWR); |
| 483 | close(active_state->connection_out); |
| 484 | } else { |
| 485 | close(active_state->connection_in); |
| 486 | close(active_state->connection_out); |
| 487 | } |
| 488 | buffer_free(&active_state->input); |
| 489 | buffer_free(&active_state->output); |
| 490 | buffer_free(&active_state->outgoing_packet); |
| 491 | buffer_free(&active_state->incoming_packet); |
| 492 | if (active_state->compression_buffer_ready) { |
| 493 | buffer_free(&active_state->compression_buffer); |
| 494 | buffer_compress_uninit(); |
| 495 | } |
| 496 | cipher_cleanup(&active_state->send_context); |
| 497 | cipher_cleanup(&active_state->receive_context); |
| 498 | } |
| 499 | |
| 500 | /* Sets remote side protocol flags. */ |
| 501 | |
| 502 | void |
| 503 | packet_set_protocol_flags(u_int protocol_flags) |
| 504 | { |
| 505 | active_state->remote_protocol_flags = protocol_flags; |
| 506 | } |
| 507 | |
| 508 | /* Returns the remote protocol flags set earlier by the above function. */ |
| 509 | |
| 510 | u_int |
| 511 | packet_get_protocol_flags(void) |
| 512 | { |
| 513 | return active_state->remote_protocol_flags; |
| 514 | } |
| 515 | |
| 516 | /* |
| 517 | * Starts packet compression from the next packet on in both directions. |
| 518 | * Level is compression level 1 (fastest) - 9 (slow, best) as in gzip. |
| 519 | */ |
| 520 | |
| 521 | static void |
| 522 | packet_init_compression(void) |
| 523 | { |
| 524 | if (active_state->compression_buffer_ready == 1) |
| 525 | return; |
| 526 | active_state->compression_buffer_ready = 1; |
| 527 | buffer_init(&active_state->compression_buffer); |
| 528 | } |
| 529 | |
| 530 | void |
| 531 | packet_start_compression(int level) |
| 532 | { |
| 533 | if (active_state->packet_compression && !compat20) |
| 534 | fatal("Compression already enabled."); |
| 535 | active_state->packet_compression = 1; |
| 536 | packet_init_compression(); |
| 537 | buffer_compress_init_send(level); |
| 538 | buffer_compress_init_recv(); |
| 539 | } |
| 540 | |
| 541 | /* |
| 542 | * Causes any further packets to be encrypted using the given key. The same |
| 543 | * key is used for both sending and reception. However, both directions are |
| 544 | * encrypted independently of each other. |
| 545 | */ |
| 546 | |
| 547 | void |
| 548 | packet_set_encryption_key(const u_char *key, u_int keylen, int number) |
| 549 | { |
| 550 | Cipher *cipher = cipher_by_number(number); |
| 551 | |
| 552 | if (cipher == NULL) |
| 553 | fatal("packet_set_encryption_key: unknown cipher number %d", number); |
| 554 | if (keylen < 20) |
| 555 | fatal("packet_set_encryption_key: keylen too small: %d", keylen); |
| 556 | if (keylen > SSH_SESSION_KEY_LENGTH) |
| 557 | fatal("packet_set_encryption_key: keylen too big: %d", keylen); |
| 558 | memcpy(active_state->ssh1_key, key, keylen); |
| 559 | active_state->ssh1_keylen = keylen; |
| 560 | cipher_init(&active_state->send_context, cipher, key, keylen, NULL, |
| 561 | 0, CIPHER_ENCRYPT); |
| 562 | cipher_init(&active_state->receive_context, cipher, key, keylen, NULL, |
| 563 | 0, CIPHER_DECRYPT); |
| 564 | } |
| 565 | |
| 566 | u_int |
| 567 | packet_get_encryption_key(u_char *key) |
| 568 | { |
| 569 | if (key == NULL) |
| 570 | return (active_state->ssh1_keylen); |
| 571 | memcpy(key, active_state->ssh1_key, active_state->ssh1_keylen); |
| 572 | return (active_state->ssh1_keylen); |
| 573 | } |
| 574 | |
| 575 | /* Start constructing a packet to send. */ |
| 576 | void |
| 577 | packet_start(u_char type) |
| 578 | { |
| 579 | u_char buf[9]; |
| 580 | int len; |
| 581 | |
| 582 | DBG(debug("packet_start[%d]", type)); |
| 583 | len = compat20 ? 6 : 9; |
| 584 | memset(buf, 0, len - 1); |
| 585 | buf[len - 1] = type; |
| 586 | buffer_clear(&active_state->outgoing_packet); |
| 587 | buffer_append(&active_state->outgoing_packet, buf, len); |
| 588 | } |
| 589 | |
| 590 | /* Append payload. */ |
| 591 | void |
| 592 | packet_put_char(int value) |
| 593 | { |
| 594 | char ch = value; |
| 595 | |
| 596 | buffer_append(&active_state->outgoing_packet, &ch, 1); |
| 597 | } |
| 598 | |
| 599 | void |
| 600 | packet_put_int(u_int value) |
| 601 | { |
| 602 | buffer_put_int(&active_state->outgoing_packet, value); |
| 603 | } |
| 604 | |
| 605 | void |
| 606 | packet_put_int64(u_int64_t value) |
| 607 | { |
| 608 | buffer_put_int64(&active_state->outgoing_packet, value); |
| 609 | } |
| 610 | |
| 611 | void |
| 612 | packet_put_string(const void *buf, u_int len) |
| 613 | { |
| 614 | buffer_put_string(&active_state->outgoing_packet, buf, len); |
| 615 | } |
| 616 | |
| 617 | void |
| 618 | packet_put_cstring(const char *str) |
| 619 | { |
| 620 | buffer_put_cstring(&active_state->outgoing_packet, str); |
| 621 | } |
| 622 | |
| 623 | void |
| 624 | packet_put_raw(const void *buf, u_int len) |
| 625 | { |
| 626 | buffer_append(&active_state->outgoing_packet, buf, len); |
| 627 | } |
| 628 | |
| 629 | void |
| 630 | packet_put_bignum(BIGNUM * value) |
| 631 | { |
| 632 | buffer_put_bignum(&active_state->outgoing_packet, value); |
| 633 | } |
| 634 | |
| 635 | void |
| 636 | packet_put_bignum2(BIGNUM * value) |
| 637 | { |
| 638 | buffer_put_bignum2(&active_state->outgoing_packet, value); |
| 639 | } |
| 640 | |
| 641 | #ifdef OPENSSL_HAS_ECC |
| 642 | void |
| 643 | packet_put_ecpoint(const EC_GROUP *curve, const EC_POINT *point) |
| 644 | { |
| 645 | buffer_put_ecpoint(&active_state->outgoing_packet, curve, point); |
| 646 | } |
| 647 | #endif |
| 648 | |
| 649 | /* |
| 650 | * Finalizes and sends the packet. If the encryption key has been set, |
| 651 | * encrypts the packet before sending. |
| 652 | */ |
| 653 | |
| 654 | static void |
| 655 | packet_send1(void) |
| 656 | { |
| 657 | u_char buf[8], *cp; |
| 658 | int i, padding, len; |
| 659 | u_int checksum; |
| 660 | u_int32_t rnd = 0; |
| 661 | |
| 662 | /* |
| 663 | * If using packet compression, compress the payload of the outgoing |
| 664 | * packet. |
| 665 | */ |
| 666 | if (active_state->packet_compression) { |
| 667 | buffer_clear(&active_state->compression_buffer); |
| 668 | /* Skip padding. */ |
| 669 | buffer_consume(&active_state->outgoing_packet, 8); |
| 670 | /* padding */ |
| 671 | buffer_append(&active_state->compression_buffer, |
| 672 | "\0\0\0\0\0\0\0\0", 8); |
| 673 | buffer_compress(&active_state->outgoing_packet, |
| 674 | &active_state->compression_buffer); |
| 675 | buffer_clear(&active_state->outgoing_packet); |
| 676 | buffer_append(&active_state->outgoing_packet, |
| 677 | buffer_ptr(&active_state->compression_buffer), |
| 678 | buffer_len(&active_state->compression_buffer)); |
| 679 | } |
| 680 | /* Compute packet length without padding (add checksum, remove padding). */ |
| 681 | len = buffer_len(&active_state->outgoing_packet) + 4 - 8; |
| 682 | |
| 683 | /* Insert padding. Initialized to zero in packet_start1() */ |
| 684 | padding = 8 - len % 8; |
| 685 | if (!active_state->send_context.plaintext) { |
| 686 | cp = buffer_ptr(&active_state->outgoing_packet); |
| 687 | for (i = 0; i < padding; i++) { |
| 688 | if (i % 4 == 0) |
| 689 | rnd = arc4random(); |
| 690 | cp[7 - i] = rnd & 0xff; |
| 691 | rnd >>= 8; |
| 692 | } |
| 693 | } |
| 694 | buffer_consume(&active_state->outgoing_packet, 8 - padding); |
| 695 | |
| 696 | /* Add check bytes. */ |
| 697 | checksum = ssh_crc32(buffer_ptr(&active_state->outgoing_packet), |
| 698 | buffer_len(&active_state->outgoing_packet)); |
| 699 | put_u32(buf, checksum); |
| 700 | buffer_append(&active_state->outgoing_packet, buf, 4); |
| 701 | |
| 702 | #ifdef PACKET_DEBUG |
| 703 | fprintf(stderr, "packet_send plain: "); |
| 704 | buffer_dump(&active_state->outgoing_packet); |
| 705 | #endif |
| 706 | |
| 707 | /* Append to output. */ |
| 708 | put_u32(buf, len); |
| 709 | buffer_append(&active_state->output, buf, 4); |
| 710 | cp = buffer_append_space(&active_state->output, |
| 711 | buffer_len(&active_state->outgoing_packet)); |
| 712 | cipher_crypt(&active_state->send_context, cp, |
| 713 | buffer_ptr(&active_state->outgoing_packet), |
| 714 | buffer_len(&active_state->outgoing_packet)); |
| 715 | |
| 716 | #ifdef PACKET_DEBUG |
| 717 | fprintf(stderr, "encrypted: "); |
| 718 | buffer_dump(&active_state->output); |
| 719 | #endif |
| 720 | active_state->p_send.packets++; |
| 721 | active_state->p_send.bytes += len + |
| 722 | buffer_len(&active_state->outgoing_packet); |
| 723 | buffer_clear(&active_state->outgoing_packet); |
| 724 | |
| 725 | /* |
| 726 | * Note that the packet is now only buffered in output. It won't be |
| 727 | * actually sent until packet_write_wait or packet_write_poll is |
| 728 | * called. |
| 729 | */ |
| 730 | } |
| 731 | |
| 732 | void |
| 733 | set_newkeys(int mode) |
| 734 | { |
| 735 | Enc *enc; |
| 736 | Mac *mac; |
| 737 | Comp *comp; |
| 738 | CipherContext *cc; |
| 739 | u_int64_t *max_blocks; |
| 740 | int crypt_type; |
| 741 | |
| 742 | debug2("set_newkeys: mode %d", mode); |
| 743 | |
| 744 | if (mode == MODE_OUT) { |
| 745 | cc = &active_state->send_context; |
| 746 | crypt_type = CIPHER_ENCRYPT; |
| 747 | active_state->p_send.packets = active_state->p_send.blocks = 0; |
| 748 | max_blocks = &active_state->max_blocks_out; |
| 749 | } else { |
| 750 | cc = &active_state->receive_context; |
| 751 | crypt_type = CIPHER_DECRYPT; |
| 752 | active_state->p_read.packets = active_state->p_read.blocks = 0; |
| 753 | max_blocks = &active_state->max_blocks_in; |
| 754 | } |
| 755 | if (active_state->newkeys[mode] != NULL) { |
| 756 | debug("set_newkeys: rekeying"); |
| 757 | cipher_cleanup(cc); |
| 758 | enc = &active_state->newkeys[mode]->enc; |
| 759 | mac = &active_state->newkeys[mode]->mac; |
| 760 | comp = &active_state->newkeys[mode]->comp; |
| 761 | mac_clear(mac); |
| 762 | xfree(enc->name); |
| 763 | xfree(enc->iv); |
| 764 | xfree(enc->key); |
| 765 | xfree(mac->name); |
| 766 | xfree(mac->key); |
| 767 | xfree(comp->name); |
| 768 | xfree(active_state->newkeys[mode]); |
| 769 | } |
| 770 | active_state->newkeys[mode] = kex_get_newkeys(mode); |
| 771 | if (active_state->newkeys[mode] == NULL) |
| 772 | fatal("newkeys: no keys for mode %d", mode); |
| 773 | enc = &active_state->newkeys[mode]->enc; |
| 774 | mac = &active_state->newkeys[mode]->mac; |
| 775 | comp = &active_state->newkeys[mode]->comp; |
| 776 | if (mac_init(mac) == 0) |
| 777 | mac->enabled = 1; |
| 778 | DBG(debug("cipher_init_context: %d", mode)); |
| 779 | cipher_init(cc, enc->cipher, enc->key, enc->key_len, |
| 780 | enc->iv, enc->block_size, crypt_type); |
| 781 | /* Deleting the keys does not gain extra security */ |
| 782 | /* memset(enc->iv, 0, enc->block_size); |
| 783 | memset(enc->key, 0, enc->key_len); |
| 784 | memset(mac->key, 0, mac->key_len); */ |
| 785 | if ((comp->type == COMP_ZLIB || |
| 786 | (comp->type == COMP_DELAYED && |
| 787 | active_state->after_authentication)) && comp->enabled == 0) { |
| 788 | packet_init_compression(); |
| 789 | if (mode == MODE_OUT) |
| 790 | buffer_compress_init_send(6); |
| 791 | else |
| 792 | buffer_compress_init_recv(); |
| 793 | comp->enabled = 1; |
| 794 | } |
| 795 | /* |
| 796 | * The 2^(blocksize*2) limit is too expensive for 3DES, |
| 797 | * blowfish, etc, so enforce a 1GB limit for small blocksizes. |
| 798 | */ |
| 799 | if (enc->block_size >= 16) |
| 800 | *max_blocks = (u_int64_t)1 << (enc->block_size*2); |
| 801 | else |
| 802 | *max_blocks = ((u_int64_t)1 << 30) / enc->block_size; |
| 803 | if (active_state->rekey_limit) |
| 804 | *max_blocks = MIN(*max_blocks, |
| 805 | active_state->rekey_limit / enc->block_size); |
| 806 | } |
| 807 | |
| 808 | /* |
| 809 | * Delayed compression for SSH2 is enabled after authentication: |
| 810 | * This happens on the server side after a SSH2_MSG_USERAUTH_SUCCESS is sent, |
| 811 | * and on the client side after a SSH2_MSG_USERAUTH_SUCCESS is received. |
| 812 | */ |
| 813 | static void |
| 814 | packet_enable_delayed_compress(void) |
| 815 | { |
| 816 | Comp *comp = NULL; |
| 817 | int mode; |
| 818 | |
| 819 | /* |
| 820 | * Remember that we are past the authentication step, so rekeying |
| 821 | * with COMP_DELAYED will turn on compression immediately. |
| 822 | */ |
| 823 | active_state->after_authentication = 1; |
| 824 | for (mode = 0; mode < MODE_MAX; mode++) { |
| 825 | /* protocol error: USERAUTH_SUCCESS received before NEWKEYS */ |
| 826 | if (active_state->newkeys[mode] == NULL) |
| 827 | continue; |
| 828 | comp = &active_state->newkeys[mode]->comp; |
| 829 | if (comp && !comp->enabled && comp->type == COMP_DELAYED) { |
| 830 | packet_init_compression(); |
| 831 | if (mode == MODE_OUT) |
| 832 | buffer_compress_init_send(6); |
| 833 | else |
| 834 | buffer_compress_init_recv(); |
| 835 | comp->enabled = 1; |
| 836 | } |
| 837 | } |
| 838 | } |
| 839 | |
| 840 | /* |
| 841 | * Finalize packet in SSH2 format (compress, mac, encrypt, enqueue) |
| 842 | */ |
| 843 | static void |
| 844 | packet_send2_wrapped(void) |
| 845 | { |
| 846 | u_char type, *cp, *macbuf = NULL; |
| 847 | u_char padlen, pad; |
| 848 | u_int packet_length = 0; |
| 849 | u_int i, len; |
| 850 | u_int32_t rnd = 0; |
| 851 | Enc *enc = NULL; |
| 852 | Mac *mac = NULL; |
| 853 | Comp *comp = NULL; |
| 854 | int block_size; |
| 855 | |
| 856 | if (active_state->newkeys[MODE_OUT] != NULL) { |
| 857 | enc = &active_state->newkeys[MODE_OUT]->enc; |
| 858 | mac = &active_state->newkeys[MODE_OUT]->mac; |
| 859 | comp = &active_state->newkeys[MODE_OUT]->comp; |
| 860 | } |
| 861 | block_size = enc ? enc->block_size : 8; |
| 862 | |
| 863 | cp = buffer_ptr(&active_state->outgoing_packet); |
| 864 | type = cp[5]; |
| 865 | |
| 866 | #ifdef PACKET_DEBUG |
| 867 | fprintf(stderr, "plain: "); |
| 868 | buffer_dump(&active_state->outgoing_packet); |
| 869 | #endif |
| 870 | |
| 871 | if (comp && comp->enabled) { |
| 872 | len = buffer_len(&active_state->outgoing_packet); |
| 873 | /* skip header, compress only payload */ |
| 874 | buffer_consume(&active_state->outgoing_packet, 5); |
| 875 | buffer_clear(&active_state->compression_buffer); |
| 876 | buffer_compress(&active_state->outgoing_packet, |
| 877 | &active_state->compression_buffer); |
| 878 | buffer_clear(&active_state->outgoing_packet); |
| 879 | buffer_append(&active_state->outgoing_packet, "\0\0\0\0\0", 5); |
| 880 | buffer_append(&active_state->outgoing_packet, |
| 881 | buffer_ptr(&active_state->compression_buffer), |
| 882 | buffer_len(&active_state->compression_buffer)); |
| 883 | DBG(debug("compression: raw %d compressed %d", len, |
| 884 | buffer_len(&active_state->outgoing_packet))); |
| 885 | } |
| 886 | |
| 887 | /* sizeof (packet_len + pad_len + payload) */ |
| 888 | len = buffer_len(&active_state->outgoing_packet); |
| 889 | |
| 890 | /* |
| 891 | * calc size of padding, alloc space, get random data, |
| 892 | * minimum padding is 4 bytes |
| 893 | */ |
| 894 | padlen = block_size - (len % block_size); |
| 895 | if (padlen < 4) |
| 896 | padlen += block_size; |
| 897 | if (active_state->extra_pad) { |
| 898 | /* will wrap if extra_pad+padlen > 255 */ |
| 899 | active_state->extra_pad = |
| 900 | roundup(active_state->extra_pad, block_size); |
| 901 | pad = active_state->extra_pad - |
| 902 | ((len + padlen) % active_state->extra_pad); |
| 903 | debug3("packet_send2: adding %d (len %d padlen %d extra_pad %d)", |
| 904 | pad, len, padlen, active_state->extra_pad); |
| 905 | padlen += pad; |
| 906 | active_state->extra_pad = 0; |
| 907 | } |
| 908 | cp = buffer_append_space(&active_state->outgoing_packet, padlen); |
| 909 | if (enc && !active_state->send_context.plaintext) { |
| 910 | /* random padding */ |
| 911 | for (i = 0; i < padlen; i++) { |
| 912 | if (i % 4 == 0) |
| 913 | rnd = arc4random(); |
| 914 | cp[i] = rnd & 0xff; |
| 915 | rnd >>= 8; |
| 916 | } |
| 917 | } else { |
| 918 | /* clear padding */ |
| 919 | memset(cp, 0, padlen); |
| 920 | } |
| 921 | /* packet_length includes payload, padding and padding length field */ |
| 922 | packet_length = buffer_len(&active_state->outgoing_packet) - 4; |
| 923 | cp = buffer_ptr(&active_state->outgoing_packet); |
| 924 | put_u32(cp, packet_length); |
| 925 | cp[4] = padlen; |
| 926 | DBG(debug("send: len %d (includes padlen %d)", packet_length+4, padlen)); |
| 927 | |
| 928 | /* compute MAC over seqnr and packet(length fields, payload, padding) */ |
| 929 | if (mac && mac->enabled) { |
| 930 | macbuf = mac_compute(mac, active_state->p_send.seqnr, |
| 931 | buffer_ptr(&active_state->outgoing_packet), |
| 932 | buffer_len(&active_state->outgoing_packet)); |
| 933 | DBG(debug("done calc MAC out #%d", active_state->p_send.seqnr)); |
| 934 | } |
| 935 | /* encrypt packet and append to output buffer. */ |
| 936 | cp = buffer_append_space(&active_state->output, |
| 937 | buffer_len(&active_state->outgoing_packet)); |
| 938 | cipher_crypt(&active_state->send_context, cp, |
| 939 | buffer_ptr(&active_state->outgoing_packet), |
| 940 | buffer_len(&active_state->outgoing_packet)); |
| 941 | /* append unencrypted MAC */ |
| 942 | if (mac && mac->enabled) |
| 943 | buffer_append(&active_state->output, macbuf, mac->mac_len); |
| 944 | #ifdef PACKET_DEBUG |
| 945 | fprintf(stderr, "encrypted: "); |
| 946 | buffer_dump(&active_state->output); |
| 947 | #endif |
| 948 | /* increment sequence number for outgoing packets */ |
| 949 | if (++active_state->p_send.seqnr == 0) |
| 950 | logit("outgoing seqnr wraps around"); |
| 951 | if (++active_state->p_send.packets == 0) |
| 952 | if (!(datafellows & SSH_BUG_NOREKEY)) |
| 953 | fatal("XXX too many packets with same key"); |
| 954 | active_state->p_send.blocks += (packet_length + 4) / block_size; |
| 955 | active_state->p_send.bytes += packet_length + 4; |
| 956 | buffer_clear(&active_state->outgoing_packet); |
| 957 | |
| 958 | if (type == SSH2_MSG_NEWKEYS) |
| 959 | set_newkeys(MODE_OUT); |
| 960 | else if (type == SSH2_MSG_USERAUTH_SUCCESS && active_state->server_side) |
| 961 | packet_enable_delayed_compress(); |
| 962 | } |
| 963 | |
| 964 | static void |
| 965 | packet_send2(void) |
| 966 | { |
| 967 | struct packet *p; |
| 968 | u_char type, *cp; |
| 969 | |
| 970 | cp = buffer_ptr(&active_state->outgoing_packet); |
| 971 | type = cp[5]; |
| 972 | |
| 973 | /* during rekeying we can only send key exchange messages */ |
| 974 | if (active_state->rekeying) { |
| 975 | if (!((type >= SSH2_MSG_TRANSPORT_MIN) && |
| 976 | (type <= SSH2_MSG_TRANSPORT_MAX))) { |
| 977 | debug("enqueue packet: %u", type); |
| 978 | p = xmalloc(sizeof(*p)); |
| 979 | p->type = type; |
| 980 | memcpy(&p->payload, &active_state->outgoing_packet, |
| 981 | sizeof(Buffer)); |
| 982 | buffer_init(&active_state->outgoing_packet); |
| 983 | TAILQ_INSERT_TAIL(&active_state->outgoing, p, next); |
| 984 | return; |
| 985 | } |
| 986 | } |
| 987 | |
| 988 | /* rekeying starts with sending KEXINIT */ |
| 989 | if (type == SSH2_MSG_KEXINIT) |
| 990 | active_state->rekeying = 1; |
| 991 | |
| 992 | packet_send2_wrapped(); |
| 993 | |
| 994 | /* after a NEWKEYS message we can send the complete queue */ |
| 995 | if (type == SSH2_MSG_NEWKEYS) { |
| 996 | active_state->rekeying = 0; |
| 997 | while ((p = TAILQ_FIRST(&active_state->outgoing))) { |
| 998 | type = p->type; |
| 999 | debug("dequeue packet: %u", type); |
| 1000 | buffer_free(&active_state->outgoing_packet); |
| 1001 | memcpy(&active_state->outgoing_packet, &p->payload, |
| 1002 | sizeof(Buffer)); |
| 1003 | TAILQ_REMOVE(&active_state->outgoing, p, next); |
| 1004 | xfree(p); |
| 1005 | packet_send2_wrapped(); |
| 1006 | } |
| 1007 | } |
| 1008 | } |
| 1009 | |
| 1010 | void |
| 1011 | packet_send(void) |
| 1012 | { |
| 1013 | if (compat20) |
| 1014 | packet_send2(); |
| 1015 | else |
| 1016 | packet_send1(); |
| 1017 | DBG(debug("packet_send done")); |
| 1018 | } |
| 1019 | |
| 1020 | /* |
| 1021 | * Waits until a packet has been received, and returns its type. Note that |
| 1022 | * no other data is processed until this returns, so this function should not |
| 1023 | * be used during the interactive session. |
| 1024 | */ |
| 1025 | |
| 1026 | int |
| 1027 | packet_read_seqnr(u_int32_t *seqnr_p) |
| 1028 | { |
| 1029 | int type, len, ret, ms_remain, cont; |
| 1030 | fd_set *setp; |
| 1031 | char buf[8192]; |
| 1032 | struct timeval timeout, start, *timeoutp = NULL; |
| 1033 | |
| 1034 | DBG(debug("packet_read()")); |
| 1035 | |
| 1036 | setp = (fd_set *)xcalloc(howmany(active_state->connection_in + 1, |
| 1037 | NFDBITS), sizeof(fd_mask)); |
| 1038 | |
| 1039 | /* Since we are blocking, ensure that all written packets have been sent. */ |
| 1040 | packet_write_wait(); |
| 1041 | |
| 1042 | /* Stay in the loop until we have received a complete packet. */ |
| 1043 | for (;;) { |
| 1044 | /* Try to read a packet from the buffer. */ |
| 1045 | type = packet_read_poll_seqnr(seqnr_p); |
| 1046 | if (!compat20 && ( |
| 1047 | type == SSH_SMSG_SUCCESS |
| 1048 | || type == SSH_SMSG_FAILURE |
| 1049 | || type == SSH_CMSG_EOF |
| 1050 | || type == SSH_CMSG_EXIT_CONFIRMATION)) |
| 1051 | packet_check_eom(); |
| 1052 | /* If we got a packet, return it. */ |
| 1053 | if (type != SSH_MSG_NONE) { |
| 1054 | xfree(setp); |
| 1055 | return type; |
| 1056 | } |
| 1057 | /* |
| 1058 | * Otherwise, wait for some data to arrive, add it to the |
| 1059 | * buffer, and try again. |
| 1060 | */ |
| 1061 | memset(setp, 0, howmany(active_state->connection_in + 1, |
| 1062 | NFDBITS) * sizeof(fd_mask)); |
| 1063 | FD_SET(active_state->connection_in, setp); |
| 1064 | |
| 1065 | if (active_state->packet_timeout_ms > 0) { |
| 1066 | ms_remain = active_state->packet_timeout_ms; |
| 1067 | timeoutp = &timeout; |
| 1068 | } |
| 1069 | /* Wait for some data to arrive. */ |
| 1070 | for (;;) { |
| 1071 | if (active_state->packet_timeout_ms != -1) { |
| 1072 | ms_to_timeval(&timeout, ms_remain); |
| 1073 | gettimeofday(&start, NULL); |
| 1074 | } |
| 1075 | if ((ret = select(active_state->connection_in + 1, setp, |
| 1076 | NULL, NULL, timeoutp)) >= 0) |
| 1077 | break; |
| 1078 | if (errno != EAGAIN && errno != EINTR && |
| 1079 | errno != EWOULDBLOCK) |
| 1080 | break; |
| 1081 | if (active_state->packet_timeout_ms == -1) |
| 1082 | continue; |
| 1083 | ms_subtract_diff(&start, &ms_remain); |
| 1084 | if (ms_remain <= 0) { |
| 1085 | ret = 0; |
| 1086 | break; |
| 1087 | } |
| 1088 | } |
| 1089 | if (ret == 0) { |
| 1090 | logit("Connection to %.200s timed out while " |
| 1091 | "waiting to read", get_remote_ipaddr()); |
| 1092 | cleanup_exit(255); |
| 1093 | } |
| 1094 | /* Read data from the socket. */ |
| 1095 | do { |
| 1096 | cont = 0; |
| 1097 | len = roaming_read(active_state->connection_in, buf, |
| 1098 | sizeof(buf), &cont); |
| 1099 | } while (len == 0 && cont); |
| 1100 | if (len == 0) { |
| 1101 | logit("Connection closed by %.200s", get_remote_ipaddr()); |
| 1102 | cleanup_exit(255); |
| 1103 | } |
| 1104 | if (len < 0) |
| 1105 | fatal("Read from socket failed: %.100s", strerror(errno)); |
| 1106 | /* Append it to the buffer. */ |
| 1107 | packet_process_incoming(buf, len); |
| 1108 | } |
| 1109 | /* NOTREACHED */ |
| 1110 | } |
| 1111 | |
| 1112 | int |
| 1113 | packet_read(void) |
| 1114 | { |
| 1115 | return packet_read_seqnr(NULL); |
| 1116 | } |
| 1117 | |
| 1118 | /* |
| 1119 | * Waits until a packet has been received, verifies that its type matches |
| 1120 | * that given, and gives a fatal error and exits if there is a mismatch. |
| 1121 | */ |
| 1122 | |
| 1123 | void |
| 1124 | packet_read_expect(int expected_type) |
| 1125 | { |
| 1126 | int type; |
| 1127 | |
| 1128 | type = packet_read(); |
| 1129 | if (type != expected_type) |
| 1130 | packet_disconnect("Protocol error: expected packet type %d, got %d", |
| 1131 | expected_type, type); |
| 1132 | } |
| 1133 | |
| 1134 | /* Checks if a full packet is available in the data received so far via |
| 1135 | * packet_process_incoming. If so, reads the packet; otherwise returns |
| 1136 | * SSH_MSG_NONE. This does not wait for data from the connection. |
| 1137 | * |
| 1138 | * SSH_MSG_DISCONNECT is handled specially here. Also, |
| 1139 | * SSH_MSG_IGNORE messages are skipped by this function and are never returned |
| 1140 | * to higher levels. |
| 1141 | */ |
| 1142 | |
| 1143 | static int |
| 1144 | packet_read_poll1(void) |
| 1145 | { |
| 1146 | u_int len, padded_len; |
| 1147 | u_char *cp, type; |
| 1148 | u_int checksum, stored_checksum; |
| 1149 | |
| 1150 | /* Check if input size is less than minimum packet size. */ |
| 1151 | if (buffer_len(&active_state->input) < 4 + 8) |
| 1152 | return SSH_MSG_NONE; |
| 1153 | /* Get length of incoming packet. */ |
| 1154 | cp = buffer_ptr(&active_state->input); |
| 1155 | len = get_u32(cp); |
| 1156 | if (len < 1 + 2 + 2 || len > 256 * 1024) |
| 1157 | packet_disconnect("Bad packet length %u.", len); |
| 1158 | padded_len = (len + 8) & ~7; |
| 1159 | |
| 1160 | /* Check if the packet has been entirely received. */ |
| 1161 | if (buffer_len(&active_state->input) < 4 + padded_len) |
| 1162 | return SSH_MSG_NONE; |
| 1163 | |
| 1164 | /* The entire packet is in buffer. */ |
| 1165 | |
| 1166 | /* Consume packet length. */ |
| 1167 | buffer_consume(&active_state->input, 4); |
| 1168 | |
| 1169 | /* |
| 1170 | * Cryptographic attack detector for ssh |
| 1171 | * (C)1998 CORE-SDI, Buenos Aires Argentina |
| 1172 | * Ariel Futoransky(futo@core-sdi.com) |
| 1173 | */ |
| 1174 | if (!active_state->receive_context.plaintext) { |
| 1175 | switch (detect_attack(buffer_ptr(&active_state->input), |
| 1176 | padded_len)) { |
| 1177 | case DEATTACK_DETECTED: |
| 1178 | packet_disconnect("crc32 compensation attack: " |
| 1179 | "network attack detected"); |
| 1180 | case DEATTACK_DOS_DETECTED: |
| 1181 | packet_disconnect("deattack denial of " |
| 1182 | "service detected"); |
| 1183 | } |
| 1184 | } |
| 1185 | |
| 1186 | /* Decrypt data to incoming_packet. */ |
| 1187 | buffer_clear(&active_state->incoming_packet); |
| 1188 | cp = buffer_append_space(&active_state->incoming_packet, padded_len); |
| 1189 | cipher_crypt(&active_state->receive_context, cp, |
| 1190 | buffer_ptr(&active_state->input), padded_len); |
| 1191 | |
| 1192 | buffer_consume(&active_state->input, padded_len); |
| 1193 | |
| 1194 | #ifdef PACKET_DEBUG |
| 1195 | fprintf(stderr, "read_poll plain: "); |
| 1196 | buffer_dump(&active_state->incoming_packet); |
| 1197 | #endif |
| 1198 | |
| 1199 | /* Compute packet checksum. */ |
| 1200 | checksum = ssh_crc32(buffer_ptr(&active_state->incoming_packet), |
| 1201 | buffer_len(&active_state->incoming_packet) - 4); |
| 1202 | |
| 1203 | /* Skip padding. */ |
| 1204 | buffer_consume(&active_state->incoming_packet, 8 - len % 8); |
| 1205 | |
| 1206 | /* Test check bytes. */ |
| 1207 | if (len != buffer_len(&active_state->incoming_packet)) |
| 1208 | packet_disconnect("packet_read_poll1: len %d != buffer_len %d.", |
| 1209 | len, buffer_len(&active_state->incoming_packet)); |
| 1210 | |
| 1211 | cp = (u_char *)buffer_ptr(&active_state->incoming_packet) + len - 4; |
| 1212 | stored_checksum = get_u32(cp); |
| 1213 | if (checksum != stored_checksum) |
| 1214 | packet_disconnect("Corrupted check bytes on input."); |
| 1215 | buffer_consume_end(&active_state->incoming_packet, 4); |
| 1216 | |
| 1217 | if (active_state->packet_compression) { |
| 1218 | buffer_clear(&active_state->compression_buffer); |
| 1219 | buffer_uncompress(&active_state->incoming_packet, |
| 1220 | &active_state->compression_buffer); |
| 1221 | buffer_clear(&active_state->incoming_packet); |
| 1222 | buffer_append(&active_state->incoming_packet, |
| 1223 | buffer_ptr(&active_state->compression_buffer), |
| 1224 | buffer_len(&active_state->compression_buffer)); |
| 1225 | } |
| 1226 | active_state->p_read.packets++; |
| 1227 | active_state->p_read.bytes += padded_len + 4; |
| 1228 | type = buffer_get_char(&active_state->incoming_packet); |
| 1229 | if (type < SSH_MSG_MIN || type > SSH_MSG_MAX) |
| 1230 | packet_disconnect("Invalid ssh1 packet type: %d", type); |
| 1231 | return type; |
| 1232 | } |
| 1233 | |
| 1234 | static int |
| 1235 | packet_read_poll2(u_int32_t *seqnr_p) |
| 1236 | { |
| 1237 | u_int padlen, need; |
| 1238 | u_char *macbuf, *cp, type; |
| 1239 | u_int maclen, block_size; |
| 1240 | Enc *enc = NULL; |
| 1241 | Mac *mac = NULL; |
| 1242 | Comp *comp = NULL; |
| 1243 | |
| 1244 | if (active_state->packet_discard) |
| 1245 | return SSH_MSG_NONE; |
| 1246 | |
| 1247 | if (active_state->newkeys[MODE_IN] != NULL) { |
| 1248 | enc = &active_state->newkeys[MODE_IN]->enc; |
| 1249 | mac = &active_state->newkeys[MODE_IN]->mac; |
| 1250 | comp = &active_state->newkeys[MODE_IN]->comp; |
| 1251 | } |
| 1252 | maclen = mac && mac->enabled ? mac->mac_len : 0; |
| 1253 | block_size = enc ? enc->block_size : 8; |
| 1254 | |
| 1255 | if (active_state->packlen == 0) { |
| 1256 | /* |
| 1257 | * check if input size is less than the cipher block size, |
| 1258 | * decrypt first block and extract length of incoming packet |
| 1259 | */ |
| 1260 | if (buffer_len(&active_state->input) < block_size) |
| 1261 | return SSH_MSG_NONE; |
| 1262 | buffer_clear(&active_state->incoming_packet); |
| 1263 | cp = buffer_append_space(&active_state->incoming_packet, |
| 1264 | block_size); |
| 1265 | cipher_crypt(&active_state->receive_context, cp, |
| 1266 | buffer_ptr(&active_state->input), block_size); |
| 1267 | cp = buffer_ptr(&active_state->incoming_packet); |
| 1268 | active_state->packlen = get_u32(cp); |
| 1269 | if (active_state->packlen < 1 + 4 || |
| 1270 | active_state->packlen > PACKET_MAX_SIZE) { |
| 1271 | #ifdef PACKET_DEBUG |
| 1272 | buffer_dump(&active_state->incoming_packet); |
| 1273 | #endif |
| 1274 | logit("Bad packet length %u.", active_state->packlen); |
| 1275 | packet_start_discard(enc, mac, active_state->packlen, |
| 1276 | PACKET_MAX_SIZE); |
| 1277 | return SSH_MSG_NONE; |
| 1278 | } |
| 1279 | DBG(debug("input: packet len %u", active_state->packlen+4)); |
| 1280 | buffer_consume(&active_state->input, block_size); |
| 1281 | } |
| 1282 | /* we have a partial packet of block_size bytes */ |
| 1283 | need = 4 + active_state->packlen - block_size; |
| 1284 | DBG(debug("partial packet %d, need %d, maclen %d", block_size, |
| 1285 | need, maclen)); |
| 1286 | if (need % block_size != 0) { |
| 1287 | logit("padding error: need %d block %d mod %d", |
| 1288 | need, block_size, need % block_size); |
| 1289 | packet_start_discard(enc, mac, active_state->packlen, |
| 1290 | PACKET_MAX_SIZE - block_size); |
| 1291 | return SSH_MSG_NONE; |
| 1292 | } |
| 1293 | /* |
| 1294 | * check if the entire packet has been received and |
| 1295 | * decrypt into incoming_packet |
| 1296 | */ |
| 1297 | if (buffer_len(&active_state->input) < need + maclen) |
| 1298 | return SSH_MSG_NONE; |
| 1299 | #ifdef PACKET_DEBUG |
| 1300 | fprintf(stderr, "read_poll enc/full: "); |
| 1301 | buffer_dump(&active_state->input); |
| 1302 | #endif |
| 1303 | cp = buffer_append_space(&active_state->incoming_packet, need); |
| 1304 | cipher_crypt(&active_state->receive_context, cp, |
| 1305 | buffer_ptr(&active_state->input), need); |
| 1306 | buffer_consume(&active_state->input, need); |
| 1307 | /* |
| 1308 | * compute MAC over seqnr and packet, |
| 1309 | * increment sequence number for incoming packet |
| 1310 | */ |
| 1311 | if (mac && mac->enabled) { |
| 1312 | macbuf = mac_compute(mac, active_state->p_read.seqnr, |
| 1313 | buffer_ptr(&active_state->incoming_packet), |
| 1314 | buffer_len(&active_state->incoming_packet)); |
| 1315 | if (timingsafe_bcmp(macbuf, buffer_ptr(&active_state->input), |
| 1316 | mac->mac_len) != 0) { |
| 1317 | logit("Corrupted MAC on input."); |
| 1318 | if (need > PACKET_MAX_SIZE) |
| 1319 | fatal("internal error need %d", need); |
| 1320 | packet_start_discard(enc, mac, active_state->packlen, |
| 1321 | PACKET_MAX_SIZE - need); |
| 1322 | return SSH_MSG_NONE; |
| 1323 | } |
| 1324 | |
| 1325 | DBG(debug("MAC #%d ok", active_state->p_read.seqnr)); |
| 1326 | buffer_consume(&active_state->input, mac->mac_len); |
| 1327 | } |
| 1328 | /* XXX now it's safe to use fatal/packet_disconnect */ |
| 1329 | if (seqnr_p != NULL) |
| 1330 | *seqnr_p = active_state->p_read.seqnr; |
| 1331 | if (++active_state->p_read.seqnr == 0) |
| 1332 | logit("incoming seqnr wraps around"); |
| 1333 | if (++active_state->p_read.packets == 0) |
| 1334 | if (!(datafellows & SSH_BUG_NOREKEY)) |
| 1335 | fatal("XXX too many packets with same key"); |
| 1336 | active_state->p_read.blocks += (active_state->packlen + 4) / block_size; |
| 1337 | active_state->p_read.bytes += active_state->packlen + 4; |
| 1338 | |
| 1339 | /* get padlen */ |
| 1340 | cp = buffer_ptr(&active_state->incoming_packet); |
| 1341 | padlen = cp[4]; |
| 1342 | DBG(debug("input: padlen %d", padlen)); |
| 1343 | if (padlen < 4) |
| 1344 | packet_disconnect("Corrupted padlen %d on input.", padlen); |
| 1345 | |
| 1346 | /* skip packet size + padlen, discard padding */ |
| 1347 | buffer_consume(&active_state->incoming_packet, 4 + 1); |
| 1348 | buffer_consume_end(&active_state->incoming_packet, padlen); |
| 1349 | |
| 1350 | DBG(debug("input: len before de-compress %d", |
| 1351 | buffer_len(&active_state->incoming_packet))); |
| 1352 | if (comp && comp->enabled) { |
| 1353 | buffer_clear(&active_state->compression_buffer); |
| 1354 | buffer_uncompress(&active_state->incoming_packet, |
| 1355 | &active_state->compression_buffer); |
| 1356 | buffer_clear(&active_state->incoming_packet); |
| 1357 | buffer_append(&active_state->incoming_packet, |
| 1358 | buffer_ptr(&active_state->compression_buffer), |
| 1359 | buffer_len(&active_state->compression_buffer)); |
| 1360 | DBG(debug("input: len after de-compress %d", |
| 1361 | buffer_len(&active_state->incoming_packet))); |
| 1362 | } |
| 1363 | /* |
| 1364 | * get packet type, implies consume. |
| 1365 | * return length of payload (without type field) |
| 1366 | */ |
| 1367 | type = buffer_get_char(&active_state->incoming_packet); |
| 1368 | if (type < SSH2_MSG_MIN || type >= SSH2_MSG_LOCAL_MIN) |
| 1369 | packet_disconnect("Invalid ssh2 packet type: %d", type); |
| 1370 | if (type == SSH2_MSG_NEWKEYS) |
| 1371 | set_newkeys(MODE_IN); |
| 1372 | else if (type == SSH2_MSG_USERAUTH_SUCCESS && |
| 1373 | !active_state->server_side) |
| 1374 | packet_enable_delayed_compress(); |
| 1375 | #ifdef PACKET_DEBUG |
| 1376 | fprintf(stderr, "read/plain[%d]:\r\n", type); |
| 1377 | buffer_dump(&active_state->incoming_packet); |
| 1378 | #endif |
| 1379 | /* reset for next packet */ |
| 1380 | active_state->packlen = 0; |
| 1381 | return type; |
| 1382 | } |
| 1383 | |
| 1384 | int |
| 1385 | packet_read_poll_seqnr(u_int32_t *seqnr_p) |
| 1386 | { |
| 1387 | u_int reason, seqnr; |
| 1388 | u_char type; |
| 1389 | char *msg; |
| 1390 | |
| 1391 | for (;;) { |
| 1392 | if (compat20) { |
| 1393 | type = packet_read_poll2(seqnr_p); |
| 1394 | if (type) { |
| 1395 | active_state->keep_alive_timeouts = 0; |
| 1396 | DBG(debug("received packet type %d", type)); |
| 1397 | } |
| 1398 | switch (type) { |
| 1399 | case SSH2_MSG_IGNORE: |
| 1400 | debug3("Received SSH2_MSG_IGNORE"); |
| 1401 | break; |
| 1402 | case SSH2_MSG_DEBUG: |
| 1403 | packet_get_char(); |
| 1404 | msg = packet_get_string(NULL); |
| 1405 | debug("Remote: %.900s", msg); |
| 1406 | xfree(msg); |
| 1407 | msg = packet_get_string(NULL); |
| 1408 | xfree(msg); |
| 1409 | break; |
| 1410 | case SSH2_MSG_DISCONNECT: |
| 1411 | reason = packet_get_int(); |
| 1412 | msg = packet_get_string(NULL); |
| 1413 | logit("Received disconnect from %s: %u: %.400s", |
| 1414 | get_remote_ipaddr(), reason, msg); |
| 1415 | xfree(msg); |
| 1416 | cleanup_exit(255); |
| 1417 | break; |
| 1418 | case SSH2_MSG_UNIMPLEMENTED: |
| 1419 | seqnr = packet_get_int(); |
| 1420 | debug("Received SSH2_MSG_UNIMPLEMENTED for %u", |
| 1421 | seqnr); |
| 1422 | break; |
| 1423 | default: |
| 1424 | return type; |
| 1425 | } |
| 1426 | } else { |
| 1427 | type = packet_read_poll1(); |
| 1428 | switch (type) { |
| 1429 | case SSH_MSG_IGNORE: |
| 1430 | break; |
| 1431 | case SSH_MSG_DEBUG: |
| 1432 | msg = packet_get_string(NULL); |
| 1433 | debug("Remote: %.900s", msg); |
| 1434 | xfree(msg); |
| 1435 | break; |
| 1436 | case SSH_MSG_DISCONNECT: |
| 1437 | msg = packet_get_string(NULL); |
| 1438 | logit("Received disconnect from %s: %.400s", |
| 1439 | get_remote_ipaddr(), msg); |
| 1440 | cleanup_exit(255); |
| 1441 | break; |
| 1442 | default: |
| 1443 | if (type) |
| 1444 | DBG(debug("received packet type %d", type)); |
| 1445 | return type; |
| 1446 | } |
| 1447 | } |
| 1448 | } |
| 1449 | } |
| 1450 | |
| 1451 | int |
| 1452 | packet_read_poll(void) |
| 1453 | { |
| 1454 | return packet_read_poll_seqnr(NULL); |
| 1455 | } |
| 1456 | |
| 1457 | /* |
| 1458 | * Buffers the given amount of input characters. This is intended to be used |
| 1459 | * together with packet_read_poll. |
| 1460 | */ |
| 1461 | |
| 1462 | void |
| 1463 | packet_process_incoming(const char *buf, u_int len) |
| 1464 | { |
| 1465 | if (active_state->packet_discard) { |
| 1466 | active_state->keep_alive_timeouts = 0; /* ?? */ |
| 1467 | if (len >= active_state->packet_discard) |
| 1468 | packet_stop_discard(); |
| 1469 | active_state->packet_discard -= len; |
| 1470 | return; |
| 1471 | } |
| 1472 | buffer_append(&active_state->input, buf, len); |
| 1473 | } |
| 1474 | |
| 1475 | /* Returns a character from the packet. */ |
| 1476 | |
| 1477 | u_int |
| 1478 | packet_get_char(void) |
| 1479 | { |
| 1480 | char ch; |
| 1481 | |
| 1482 | buffer_get(&active_state->incoming_packet, &ch, 1); |
| 1483 | return (u_char) ch; |
| 1484 | } |
| 1485 | |
| 1486 | /* Returns an integer from the packet data. */ |
| 1487 | |
| 1488 | u_int |
| 1489 | packet_get_int(void) |
| 1490 | { |
| 1491 | return buffer_get_int(&active_state->incoming_packet); |
| 1492 | } |
| 1493 | |
| 1494 | /* Returns an 64 bit integer from the packet data. */ |
| 1495 | |
| 1496 | u_int64_t |
| 1497 | packet_get_int64(void) |
| 1498 | { |
| 1499 | return buffer_get_int64(&active_state->incoming_packet); |
| 1500 | } |
| 1501 | |
| 1502 | /* |
| 1503 | * Returns an arbitrary precision integer from the packet data. The integer |
| 1504 | * must have been initialized before this call. |
| 1505 | */ |
| 1506 | |
| 1507 | void |
| 1508 | packet_get_bignum(BIGNUM * value) |
| 1509 | { |
| 1510 | buffer_get_bignum(&active_state->incoming_packet, value); |
| 1511 | } |
| 1512 | |
| 1513 | void |
| 1514 | packet_get_bignum2(BIGNUM * value) |
| 1515 | { |
| 1516 | buffer_get_bignum2(&active_state->incoming_packet, value); |
| 1517 | } |
| 1518 | |
| 1519 | #ifdef OPENSSL_HAS_ECC |
| 1520 | void |
| 1521 | packet_get_ecpoint(const EC_GROUP *curve, EC_POINT *point) |
| 1522 | { |
| 1523 | buffer_get_ecpoint(&active_state->incoming_packet, curve, point); |
| 1524 | } |
| 1525 | #endif |
| 1526 | |
| 1527 | void * |
| 1528 | packet_get_raw(u_int *length_ptr) |
| 1529 | { |
| 1530 | u_int bytes = buffer_len(&active_state->incoming_packet); |
| 1531 | |
| 1532 | if (length_ptr != NULL) |
| 1533 | *length_ptr = bytes; |
| 1534 | return buffer_ptr(&active_state->incoming_packet); |
| 1535 | } |
| 1536 | |
| 1537 | int |
| 1538 | packet_remaining(void) |
| 1539 | { |
| 1540 | return buffer_len(&active_state->incoming_packet); |
| 1541 | } |
| 1542 | |
| 1543 | /* |
| 1544 | * Returns a string from the packet data. The string is allocated using |
| 1545 | * xmalloc; it is the responsibility of the calling program to free it when |
| 1546 | * no longer needed. The length_ptr argument may be NULL, or point to an |
| 1547 | * integer into which the length of the string is stored. |
| 1548 | */ |
| 1549 | |
| 1550 | void * |
| 1551 | packet_get_string(u_int *length_ptr) |
| 1552 | { |
| 1553 | return buffer_get_string(&active_state->incoming_packet, length_ptr); |
| 1554 | } |
| 1555 | |
| 1556 | void * |
| 1557 | packet_get_string_ptr(u_int *length_ptr) |
| 1558 | { |
| 1559 | return buffer_get_string_ptr(&active_state->incoming_packet, length_ptr); |
| 1560 | } |
| 1561 | |
| 1562 | /* Ensures the returned string has no embedded \0 characters in it. */ |
| 1563 | char * |
| 1564 | packet_get_cstring(u_int *length_ptr) |
| 1565 | { |
| 1566 | return buffer_get_cstring(&active_state->incoming_packet, length_ptr); |
| 1567 | } |
| 1568 | |
| 1569 | /* |
| 1570 | * Sends a diagnostic message from the server to the client. This message |
| 1571 | * can be sent at any time (but not while constructing another message). The |
| 1572 | * message is printed immediately, but only if the client is being executed |
| 1573 | * in verbose mode. These messages are primarily intended to ease debugging |
| 1574 | * authentication problems. The length of the formatted message must not |
| 1575 | * exceed 1024 bytes. This will automatically call packet_write_wait. |
| 1576 | */ |
| 1577 | |
| 1578 | void |
| 1579 | packet_send_debug(const char *fmt,...) |
| 1580 | { |
| 1581 | char buf[1024]; |
| 1582 | va_list args; |
| 1583 | |
| 1584 | if (compat20 && (datafellows & SSH_BUG_DEBUG)) |
| 1585 | return; |
| 1586 | |
| 1587 | va_start(args, fmt); |
| 1588 | vsnprintf(buf, sizeof(buf), fmt, args); |
| 1589 | va_end(args); |
| 1590 | |
| 1591 | if (compat20) { |
| 1592 | packet_start(SSH2_MSG_DEBUG); |
| 1593 | packet_put_char(0); /* bool: always display */ |
| 1594 | packet_put_cstring(buf); |
| 1595 | packet_put_cstring(""); |
| 1596 | } else { |
| 1597 | packet_start(SSH_MSG_DEBUG); |
| 1598 | packet_put_cstring(buf); |
| 1599 | } |
| 1600 | packet_send(); |
| 1601 | packet_write_wait(); |
| 1602 | } |
| 1603 | |
| 1604 | /* |
| 1605 | * Logs the error plus constructs and sends a disconnect packet, closes the |
| 1606 | * connection, and exits. This function never returns. The error message |
| 1607 | * should not contain a newline. The length of the formatted message must |
| 1608 | * not exceed 1024 bytes. |
| 1609 | */ |
| 1610 | |
| 1611 | void |
| 1612 | packet_disconnect(const char *fmt,...) |
| 1613 | { |
| 1614 | char buf[1024]; |
| 1615 | va_list args; |
| 1616 | static int disconnecting = 0; |
| 1617 | |
| 1618 | if (disconnecting) /* Guard against recursive invocations. */ |
| 1619 | fatal("packet_disconnect called recursively."); |
| 1620 | disconnecting = 1; |
| 1621 | |
| 1622 | /* |
| 1623 | * Format the message. Note that the caller must make sure the |
| 1624 | * message is of limited size. |
| 1625 | */ |
| 1626 | va_start(args, fmt); |
| 1627 | vsnprintf(buf, sizeof(buf), fmt, args); |
| 1628 | va_end(args); |
| 1629 | |
| 1630 | /* Display the error locally */ |
| 1631 | logit("Disconnecting: %.100s", buf); |
| 1632 | |
| 1633 | /* Send the disconnect message to the other side, and wait for it to get sent. */ |
| 1634 | if (compat20) { |
| 1635 | packet_start(SSH2_MSG_DISCONNECT); |
| 1636 | packet_put_int(SSH2_DISCONNECT_PROTOCOL_ERROR); |
| 1637 | packet_put_cstring(buf); |
| 1638 | packet_put_cstring(""); |
| 1639 | } else { |
| 1640 | packet_start(SSH_MSG_DISCONNECT); |
| 1641 | packet_put_cstring(buf); |
| 1642 | } |
| 1643 | packet_send(); |
| 1644 | packet_write_wait(); |
| 1645 | |
| 1646 | /* Stop listening for connections. */ |
| 1647 | channel_close_all(); |
| 1648 | |
| 1649 | /* Close the connection. */ |
| 1650 | packet_close(); |
| 1651 | cleanup_exit(255); |
| 1652 | } |
| 1653 | |
| 1654 | /* Checks if there is any buffered output, and tries to write some of the output. */ |
| 1655 | |
| 1656 | void |
| 1657 | packet_write_poll(void) |
| 1658 | { |
| 1659 | int len = buffer_len(&active_state->output); |
| 1660 | int cont; |
| 1661 | |
| 1662 | if (len > 0) { |
| 1663 | cont = 0; |
| 1664 | len = roaming_write(active_state->connection_out, |
| 1665 | buffer_ptr(&active_state->output), len, &cont); |
| 1666 | if (len == -1) { |
| 1667 | if (errno == EINTR || errno == EAGAIN || |
| 1668 | errno == EWOULDBLOCK) |
| 1669 | return; |
| 1670 | fatal("Write failed: %.100s", strerror(errno)); |
| 1671 | } |
| 1672 | if (len == 0 && !cont) |
| 1673 | fatal("Write connection closed"); |
| 1674 | buffer_consume(&active_state->output, len); |
| 1675 | } |
| 1676 | } |
| 1677 | |
| 1678 | /* |
| 1679 | * Calls packet_write_poll repeatedly until all pending output data has been |
| 1680 | * written. |
| 1681 | */ |
| 1682 | |
| 1683 | void |
| 1684 | packet_write_wait(void) |
| 1685 | { |
| 1686 | fd_set *setp; |
| 1687 | int ret, ms_remain; |
| 1688 | struct timeval start, timeout, *timeoutp = NULL; |
| 1689 | |
| 1690 | setp = (fd_set *)xcalloc(howmany(active_state->connection_out + 1, |
| 1691 | NFDBITS), sizeof(fd_mask)); |
| 1692 | packet_write_poll(); |
| 1693 | while (packet_have_data_to_write()) { |
| 1694 | memset(setp, 0, howmany(active_state->connection_out + 1, |
| 1695 | NFDBITS) * sizeof(fd_mask)); |
| 1696 | FD_SET(active_state->connection_out, setp); |
| 1697 | |
| 1698 | if (active_state->packet_timeout_ms > 0) { |
| 1699 | ms_remain = active_state->packet_timeout_ms; |
| 1700 | timeoutp = &timeout; |
| 1701 | } |
| 1702 | for (;;) { |
| 1703 | if (active_state->packet_timeout_ms != -1) { |
| 1704 | ms_to_timeval(&timeout, ms_remain); |
| 1705 | gettimeofday(&start, NULL); |
| 1706 | } |
| 1707 | if ((ret = select(active_state->connection_out + 1, |
| 1708 | NULL, setp, NULL, timeoutp)) >= 0) |
| 1709 | break; |
| 1710 | if (errno != EAGAIN && errno != EINTR && |
| 1711 | errno != EWOULDBLOCK) |
| 1712 | break; |
| 1713 | if (active_state->packet_timeout_ms == -1) |
| 1714 | continue; |
| 1715 | ms_subtract_diff(&start, &ms_remain); |
| 1716 | if (ms_remain <= 0) { |
| 1717 | ret = 0; |
| 1718 | break; |
| 1719 | } |
| 1720 | } |
| 1721 | if (ret == 0) { |
| 1722 | logit("Connection to %.200s timed out while " |
| 1723 | "waiting to write", get_remote_ipaddr()); |
| 1724 | cleanup_exit(255); |
| 1725 | } |
| 1726 | packet_write_poll(); |
| 1727 | } |
| 1728 | xfree(setp); |
| 1729 | } |
| 1730 | |
| 1731 | /* Returns true if there is buffered data to write to the connection. */ |
| 1732 | |
| 1733 | int |
| 1734 | packet_have_data_to_write(void) |
| 1735 | { |
| 1736 | return buffer_len(&active_state->output) != 0; |
| 1737 | } |
| 1738 | |
| 1739 | /* Returns true if there is not too much data to write to the connection. */ |
| 1740 | |
| 1741 | int |
| 1742 | packet_not_very_much_data_to_write(void) |
| 1743 | { |
| 1744 | if (active_state->interactive_mode) |
| 1745 | return buffer_len(&active_state->output) < 16384; |
| 1746 | else |
| 1747 | return buffer_len(&active_state->output) < 128 * 1024; |
| 1748 | } |
| 1749 | |
| 1750 | static void |
| 1751 | packet_set_tos(int tos) |
| 1752 | { |
| 1753 | #ifndef IP_TOS_IS_BROKEN |
| 1754 | if (!packet_connection_is_on_socket()) |
| 1755 | return; |
| 1756 | switch (packet_connection_af()) { |
| 1757 | # ifdef IP_TOS |
| 1758 | case AF_INET: |
| 1759 | debug3("%s: set IP_TOS 0x%02x", __func__, tos); |
| 1760 | if (setsockopt(active_state->connection_in, |
| 1761 | IPPROTO_IP, IP_TOS, &tos, sizeof(tos)) < 0) |
| 1762 | error("setsockopt IP_TOS %d: %.100s:", |
| 1763 | tos, strerror(errno)); |
| 1764 | break; |
| 1765 | # endif /* IP_TOS */ |
| 1766 | # ifdef IPV6_TCLASS |
| 1767 | case AF_INET6: |
| 1768 | debug3("%s: set IPV6_TCLASS 0x%02x", __func__, tos); |
| 1769 | if (setsockopt(active_state->connection_in, |
| 1770 | IPPROTO_IPV6, IPV6_TCLASS, &tos, sizeof(tos)) < 0) |
| 1771 | error("setsockopt IPV6_TCLASS %d: %.100s:", |
| 1772 | tos, strerror(errno)); |
| 1773 | break; |
| 1774 | # endif /* IPV6_TCLASS */ |
| 1775 | } |
| 1776 | #endif /* IP_TOS_IS_BROKEN */ |
| 1777 | } |
| 1778 | |
| 1779 | /* Informs that the current session is interactive. Sets IP flags for that. */ |
| 1780 | |
| 1781 | void |
| 1782 | packet_set_interactive(int interactive, int qos_interactive, int qos_bulk) |
| 1783 | { |
| 1784 | if (active_state->set_interactive_called) |
| 1785 | return; |
| 1786 | active_state->set_interactive_called = 1; |
| 1787 | |
| 1788 | /* Record that we are in interactive mode. */ |
| 1789 | active_state->interactive_mode = interactive; |
| 1790 | |
| 1791 | /* Only set socket options if using a socket. */ |
| 1792 | if (!packet_connection_is_on_socket()) |
| 1793 | return; |
| 1794 | set_nodelay(active_state->connection_in); |
| 1795 | packet_set_tos(interactive ? qos_interactive : qos_bulk); |
| 1796 | } |
| 1797 | |
| 1798 | /* Returns true if the current connection is interactive. */ |
| 1799 | |
| 1800 | int |
| 1801 | packet_is_interactive(void) |
| 1802 | { |
| 1803 | return active_state->interactive_mode; |
| 1804 | } |
| 1805 | |
| 1806 | int |
| 1807 | packet_set_maxsize(u_int s) |
| 1808 | { |
| 1809 | if (active_state->set_maxsize_called) { |
| 1810 | logit("packet_set_maxsize: called twice: old %d new %d", |
| 1811 | active_state->max_packet_size, s); |
| 1812 | return -1; |
| 1813 | } |
| 1814 | if (s < 4 * 1024 || s > 1024 * 1024) { |
| 1815 | logit("packet_set_maxsize: bad size %d", s); |
| 1816 | return -1; |
| 1817 | } |
| 1818 | active_state->set_maxsize_called = 1; |
| 1819 | debug("packet_set_maxsize: setting to %d", s); |
| 1820 | active_state->max_packet_size = s; |
| 1821 | return s; |
| 1822 | } |
| 1823 | |
| 1824 | int |
| 1825 | packet_inc_alive_timeouts(void) |
| 1826 | { |
| 1827 | return ++active_state->keep_alive_timeouts; |
| 1828 | } |
| 1829 | |
| 1830 | void |
| 1831 | packet_set_alive_timeouts(int ka) |
| 1832 | { |
| 1833 | active_state->keep_alive_timeouts = ka; |
| 1834 | } |
| 1835 | |
| 1836 | u_int |
| 1837 | packet_get_maxsize(void) |
| 1838 | { |
| 1839 | return active_state->max_packet_size; |
| 1840 | } |
| 1841 | |
| 1842 | /* roundup current message to pad bytes */ |
| 1843 | void |
| 1844 | packet_add_padding(u_char pad) |
| 1845 | { |
| 1846 | active_state->extra_pad = pad; |
| 1847 | } |
| 1848 | |
| 1849 | /* |
| 1850 | * 9.2. Ignored Data Message |
| 1851 | * |
| 1852 | * byte SSH_MSG_IGNORE |
| 1853 | * string data |
| 1854 | * |
| 1855 | * All implementations MUST understand (and ignore) this message at any |
| 1856 | * time (after receiving the protocol version). No implementation is |
| 1857 | * required to send them. This message can be used as an additional |
| 1858 | * protection measure against advanced traffic analysis techniques. |
| 1859 | */ |
| 1860 | void |
| 1861 | packet_send_ignore(int nbytes) |
| 1862 | { |
| 1863 | u_int32_t rnd = 0; |
| 1864 | int i; |
| 1865 | |
| 1866 | packet_start(compat20 ? SSH2_MSG_IGNORE : SSH_MSG_IGNORE); |
| 1867 | packet_put_int(nbytes); |
| 1868 | for (i = 0; i < nbytes; i++) { |
| 1869 | if (i % 4 == 0) |
| 1870 | rnd = arc4random(); |
| 1871 | packet_put_char((u_char)rnd & 0xff); |
| 1872 | rnd >>= 8; |
| 1873 | } |
| 1874 | } |
| 1875 | |
| 1876 | #define MAX_PACKETS (1U<<31) |
| 1877 | int |
| 1878 | packet_need_rekeying(void) |
| 1879 | { |
| 1880 | if (datafellows & SSH_BUG_NOREKEY) |
| 1881 | return 0; |
| 1882 | return |
| 1883 | (active_state->p_send.packets > MAX_PACKETS) || |
| 1884 | (active_state->p_read.packets > MAX_PACKETS) || |
| 1885 | (active_state->max_blocks_out && |
| 1886 | (active_state->p_send.blocks > active_state->max_blocks_out)) || |
| 1887 | (active_state->max_blocks_in && |
| 1888 | (active_state->p_read.blocks > active_state->max_blocks_in)); |
| 1889 | } |
| 1890 | |
| 1891 | void |
| 1892 | packet_set_rekey_limit(u_int32_t bytes) |
| 1893 | { |
| 1894 | active_state->rekey_limit = bytes; |
| 1895 | } |
| 1896 | |
| 1897 | void |
| 1898 | packet_set_server(void) |
| 1899 | { |
| 1900 | active_state->server_side = 1; |
| 1901 | } |
| 1902 | |
| 1903 | void |
| 1904 | packet_set_authenticated(void) |
| 1905 | { |
| 1906 | active_state->after_authentication = 1; |
| 1907 | } |
| 1908 | |
| 1909 | void * |
| 1910 | packet_get_input(void) |
| 1911 | { |
| 1912 | return (void *)&active_state->input; |
| 1913 | } |
| 1914 | |
| 1915 | void * |
| 1916 | packet_get_output(void) |
| 1917 | { |
| 1918 | return (void *)&active_state->output; |
| 1919 | } |
| 1920 | |
| 1921 | void * |
| 1922 | packet_get_newkeys(int mode) |
| 1923 | { |
| 1924 | return (void *)active_state->newkeys[mode]; |
| 1925 | } |
| 1926 | |
| 1927 | /* |
| 1928 | * Save the state for the real connection, and use a separate state when |
| 1929 | * resuming a suspended connection. |
| 1930 | */ |
| 1931 | void |
| 1932 | packet_backup_state(void) |
| 1933 | { |
| 1934 | struct session_state *tmp; |
| 1935 | |
| 1936 | close(active_state->connection_in); |
| 1937 | active_state->connection_in = -1; |
| 1938 | close(active_state->connection_out); |
| 1939 | active_state->connection_out = -1; |
| 1940 | if (backup_state) |
| 1941 | tmp = backup_state; |
| 1942 | else |
| 1943 | tmp = alloc_session_state(); |
| 1944 | backup_state = active_state; |
| 1945 | active_state = tmp; |
| 1946 | } |
| 1947 | |
| 1948 | /* |
| 1949 | * Swap in the old state when resuming a connecion. |
| 1950 | */ |
| 1951 | void |
| 1952 | packet_restore_state(void) |
| 1953 | { |
| 1954 | struct session_state *tmp; |
| 1955 | void *buf; |
| 1956 | u_int len; |
| 1957 | |
| 1958 | tmp = backup_state; |
| 1959 | backup_state = active_state; |
| 1960 | active_state = tmp; |
| 1961 | active_state->connection_in = backup_state->connection_in; |
| 1962 | backup_state->connection_in = -1; |
| 1963 | active_state->connection_out = backup_state->connection_out; |
| 1964 | backup_state->connection_out = -1; |
| 1965 | len = buffer_len(&backup_state->input); |
| 1966 | if (len > 0) { |
| 1967 | buf = buffer_ptr(&backup_state->input); |
| 1968 | buffer_append(&active_state->input, buf, len); |
| 1969 | buffer_clear(&backup_state->input); |
| 1970 | add_recv_bytes(len); |
| 1971 | } |
| 1972 | } |