.pylintrc - platform/external/pigweed - Gitiles

 [MASTER]  # inclusive-language: ignore

 # A comma-separated list of package or module names from where C extensions may
 # be loaded. Extensions are loading into the active Python interpreter and may
 # run arbitrary code.
 # inclusive-language: disable
 # TODO(pwbug/280) Change "whitelist" to "allowlist". (Blocked on pylint.)
 extension-pkg-whitelist=mypy
 # inclusive-language: enable

 # Add files or directories to the blocklist. They should be base names, not
 # paths.
 ignore=CVS

 # Add files or directories matching the regex patterns to the blocklist. The
 # regex matches against base names, not paths.
 ignore-patterns=

 # Python code to execute, usually for sys.path manipulation such as
 # pygtk.require().
 #init-hook=

 # Use multiple processes to speed up Pylint. Specifying 0 will auto-detect the
 # number of processors available to use.
 jobs=0

 # Control the amount of potential inferred values when inferring a single
 # object. This can help the performance when dealing with large functions or
 # complex, nested conditions.
 limit-inference-results=100

 # List of plugins (as comma separated values of python module names) to load,
 # usually to register additional checkers.
 load-plugins=

 # Pickle collected data for later comparisons.
 persistent=yes

 # Specify a configuration file.
 #rcfile=

 # When enabled, pylint would attempt to guess common misconfiguration and emit
 # user-friendly hints instead of false-positive error messages.
 suggestion-mode=yes

 # Allow loading of arbitrary C extensions. Extensions are imported into the
 # active Python interpreter and may run arbitrary code.
 unsafe-load-any-extension=no


 [MESSAGES CONTROL]

 # Only show warnings with the listed confidence levels. Leave empty to show
 # all. Valid levels: HIGH, INFERENCE, INFERENCE_FAILURE, UNDEFINED.
 confidence=

 # Disable the message, report, category or checker with the given id(s). You
 # can either give multiple identifiers separated by comma (,) or put this
 # option multiple times (only on the command line, not in the configuration
 # file where it should appear only once). You can also use "--disable=all" to
 # disable everything first and then reenable specific checks. For example, if
 # you want to run only the similarities checker, you can use "--disable=all
 # --enable=similarities". If you want to run only the classes checker, but have
 # no Warning level messages displayed, use "--disable=all --enable=classes
 # --disable=W".
 disable=bad-continuation,  # Rely on yapf for formatting
         fixme,
         subprocess-run-check,
         raise-missing-from,

 # Enable the message, report, category or checker with the given id(s). You can
 # either give multiple identifier separated by comma (,) or put this option
 # multiple time (only on the command line, not in the configuration file where
 # it should appear only once). See also the "--disable" option for examples.
 enable=c-extension-no-member,


 [REPORTS]

 # Python expression which should return a score less than or equal to 10. You
 # have access to the variables 'error', 'warning', 'refactor', and 'convention'
 # which contain the number of messages in each category, as well as 'statement'
 # which is the total number of statements analyzed. This score is used by the
 # global evaluation report (RP0004).
 evaluation=10.0 - ((float(5 * error + warning + refactor + convention) / statement) * 10)

 # Template used to display messages. This is a python new-style format string
 # used to format the message information. See doc for all details.
 #msg-template=

 # Set the output format. Available formats are text, parseable, colorized, json
 # and msvs (visual studio). You can also give a reporter class, e.g.
 # mypackage.mymodule.MyReporterClass.
 output-format=colorized

 # Tells whether to display a full report or only the messages.
 reports=no

 # Activate the evaluation score.
 score=no


 [REFACTORING]

 # Maximum number of nested blocks for function / method body
 max-nested-blocks=5

 # Complete name of functions that never returns. When checking for
 # inconsistent-return-statements if a never returning function is called then
 # it will be considered as an explicit return statement and no message will be
 # printed.
 never-returning-functions=sys.exit


 [FORMAT]

 # Expected format of line ending, e.g. empty (any line ending), LF or CRLF.
 expected-line-ending-format=LF

 # Regexp for a line that is allowed to be longer than the limit.
 ignore-long-lines=^\s*(# )?<?https?://\S+>?$

 # Number of spaces of indent required inside a hanging or continued line.
 indent-after-paren=4

 # String used as indentation unit. This is usually "    " (4 spaces) or "\t" (1
 # tab).
 indent-string='    '

 # Maximum number of characters on a single line.
 max-line-length=80

 # Maximum number of lines in a module.
 max-module-lines=9999

 # List of optional constructs for which whitespace checking is disabled. `dict-
 # separator` is used to allow tabulation in dicts, etc.: {1  : 1,\n222: 2}.
 # `trailing-comma` allows a space between comma and closing bracket: (a, ).
 # `empty-line` allows space-only lines.
 no-space-check=trailing-comma,
                dict-separator

 # Allow the body of a class to be on the same line as the declaration if body
 # contains single statement.
 single-line-class-stmt=no

 # Allow the body of an if to be on the same line as the test if there is no
 # else.
 single-line-if-stmt=no


 [VARIABLES]

 # List of additional names supposed to be defined in builtins. Remember that
 # you should avoid defining new builtins when possible.
 additional-builtins=

 # Tells whether unused global variables should be treated as a violation.
 allow-global-unused-variables=yes

 # List of strings which can identify a callback function by name. A callback
 # name must start or end with one of those strings.
 callbacks=cb_,
           _cb

 # A regular expression matching the name of placeholder variables (i.e.
 # expected to not be used). # inclusive-language: ignore
 dummy-variables-rgx=_+$|(_[a-zA-Z0-9_]*[a-zA-Z0-9]+?$)|dummy|^ignored_|^unused_

 # Argument names that match this expression will be ignored. Default to name
 # with leading underscore.
 ignored-argument-names=_.*|^ignored_|^unused_

 # Tells whether we should check for unused import in __init__ files.
 init-import=no

 # List of qualified module names which can have objects that can redefine
 # builtins.
 redefining-builtins-modules=six.moves,past.builtins,future.builtins,builtins,io


 [SPELLING]

 # Limits count of emitted suggestions for spelling mistakes.
 max-spelling-suggestions=4

 # Spelling dictionary name. Available dictionaries: none. To make it work,
 # install the python-enchant package.
 spelling-dict=

 # List of comma separated words that should not be checked.
 spelling-ignore-words=

 # A path to a file that contains the private dictionary; one word per line.
 spelling-private-dict-file=

 # Tells whether to store unknown words to the private dictionary (see the
 # --spelling-private-dict-file option) instead of raising a message.
 spelling-store-unknown-words=no


 [LOGGING]

 # Format style used to check logging format string. `old` means using %
 # formatting, `new` is for `{}` formatting,and `fstr` is for f-strings.
 logging-format-style=old

 # Logging modules to check that the string format arguments are in logging
 # function parameter format.
 logging-modules=logging


 [SIMILARITIES]

 # Ignore comments when computing similarities.
 ignore-comments=yes

 # Ignore docstrings when computing similarities.
 ignore-docstrings=yes

 # Ignore imports when computing similarities.
 ignore-imports=no

 # Minimum lines number of a similarity.
 min-similarity-lines=4


 [MISCELLANEOUS]

 # List of note tags to take in consideration, separated by a comma.
 notes=FIXME,
       XXX,
       TODO


 [STRING]

 # This flag controls whether the implicit-str-concat-in-sequence should
 # generate a warning on implicit string concatenation in sequences defined over
 # several lines.
 check-str-concat-over-line-jumps=no


 [BASIC]

 # Naming style matching correct argument names.
 argument-naming-style=snake_case

 # Regular expression matching correct argument names. Overrides argument-
 # naming-style.
 #argument-rgx=

 # Naming style matching correct attribute names.
 attr-naming-style=snake_case

 # Regular expression matching correct attribute names. Overrides attr-naming-
 # style.
 #attr-rgx=

 # Bad variable names which should always be refused, separated by a comma.
 bad-names=foo,
           bar,
           baz,
           toto,
           tutu,
           tata

 # Naming style matching correct class attribute names.
 class-attribute-naming-style=any

 # Regular expression matching correct class attribute names. Overrides class-
 # attribute-naming-style.
 #class-attribute-rgx=

 # Naming style matching correct class names.
 class-naming-style=PascalCase

 # Regular expression matching correct class names. Overrides class-naming-
 # style.
 #class-rgx=

 # Naming style matching correct constant names.
 const-naming-style=UPPER_CASE

 # Regular expression matching correct constant names. Overrides const-naming-
 # style.
 const-rgx=^(_?[A-Z][A-Z0-9_]*|__[a-z0-9_]+__|_?[a-z][a-z0-9_]*)$

 # Minimum line length for functions/classes that require docstrings, shorter
 # ones are exempt.
 docstring-min-length=30

 # Naming style matching correct function names.
 function-naming-style=snake_case

 # Regular expression matching correct function names. Overrides function-
 # naming-style.
 #function-rgx=

 # Good variable names which should always be accepted, separated by a comma.
 good-names=i,
            j,
            k,
            db,
            ex,
            fd,
            id,
            ok,
            Run,
            T,
            _

 # Include a hint for the correct naming format with invalid-name.
 include-naming-hint=no

 # Naming style matching correct inline iteration names.
 inlinevar-naming-style=any

 # Regular expression matching correct inline iteration names. Overrides
 # inlinevar-naming-style.
 #inlinevar-rgx=

 # Naming style matching correct method names.
 method-naming-style=snake_case

 # Regular expression matching correct method names. Overrides method-naming-
 # style.
 #method-rgx=

 # Naming style matching correct module names.
 module-naming-style=snake_case

 # Regular expression matching correct module names. Overrides module-naming-
 # style.
 #module-rgx=

 # Colon-delimited sets of names that determine each other's naming style when
 # the name regexes allow several styles.
 name-group=

 # Regular expression which should only match function or class names that do
 # not require a docstring.
 no-docstring-rgx=^_

 # List of decorators that produce properties, such as abc.abstractproperty. Add
 # to this list to register other decorators that produce valid properties.
 # These decorators are taken in consideration only for invalid-name.
 property-classes=abc.abstractproperty

 # Naming style matching correct variable names.
 variable-naming-style=snake_case

 # Regular expression matching correct variable names. Overrides variable-
 # naming-style.
 #variable-rgx=


 [TYPECHECK]

 # List of decorators that produce context managers, such as
 # contextlib.contextmanager. Add to this list to register other decorators that
 # produce valid context managers.
 contextmanager-decorators=contextlib.contextmanager

 # List of members which are set dynamically and missed by pylint inference
 # system, and so shouldn't trigger E1101 when accessed. Python regular
 # expressions are accepted.
 generated-members=descriptor_pb2.*,plugin_pb2.*

 # Tells whether missing members accessed in mixin class should be ignored. A
 # mixin class is detected if its name ends with "mixin" (case insensitive).
 ignore-mixin-members=yes

 # Tells whether to warn about missing members when the owner of the attribute
 # is inferred to be None.
 ignore-none=yes

 # This flag controls whether pylint should warn about no-member and similar
 # checks whenever an opaque object is returned when inferring. The inference
 # can return multiple potential results while evaluating a Python object, but
 # some branches might not be evaluated, which results in partial inference. In
 # that case, it might be useful to still emit no-member and other checks for
 # the rest of the inferred objects.
 ignore-on-opaque-inference=yes

 # List of class names for which member attributes should not be checked (useful
 # for classes with dynamically set attributes). This supports the use of
 # qualified names.
 ignored-classes=optparse.Values,
                 thread._local,
                 _thread._local,
                 pw_cli.envparse.EnvNamespace

 # List of module names for which member attributes should not be checked
 # (useful for modules/projects where namespaces are manipulated during runtime
 # and thus existing member attributes cannot be deduced by static analysis). It
 # supports qualified module names, as well as Unix pattern matching.
 ignored-modules=*_pb2

 # Show a hint with possible names when a member name was not found. The aspect
 # of finding the hint is based on edit distance.
 missing-member-hint=yes

 # The minimum edit distance a name should have in order to be considered a
 # similar match for a missing member name.
 missing-member-hint-distance=1

 # The total number of similar names that should be taken in consideration when
 # showing a hint for a missing member.
 missing-member-max-choices=1

 # List of decorators that change the signature of a decorated function.
 signature-mutators=


 [DESIGN]

 # Maximum number of arguments for function / method.
 max-args=10

 # Maximum number of attributes for a class (see R0902).
 max-attributes=11

 # Maximum number of boolean expressions in an if statement (see R0916).
 max-bool-expr=5

 # Maximum number of branch for function / method body.
 max-branches=25

 # Maximum number of locals for function / method body.
 max-locals=25

 # Maximum number of parents for a class (see R0901).
 max-parents=7

 # Maximum number of public methods for a class (see R0904).
 max-public-methods=25

 # Maximum number of return / yield for function / method body.
 max-returns=10

 # Maximum number of statements in function / method body.
 max-statements=100

 # Minimum number of public methods for a class (see R0903).
 min-public-methods=0


 [CLASSES]

 # List of method names used to declare (i.e. assign) instance attributes.
 defining-attr-methods=__init__,
                       __new__,
                       setUp,
                       __post_init__

 # List of member names, which should be excluded from the protected access
 # warning.
 exclude-protected=_asdict,
                   _fields,
                   _replace,
                   _source,
                   _make

 # List of valid names for the first argument in a class method.
 valid-classmethod-first-arg=cls

 # List of valid names for the first argument in a metaclass class method.
 valid-metaclass-classmethod-first-arg=cls


 [IMPORTS]

 # List of modules that can be imported at any level, not just the top level
 # one.
 allow-any-import-level=

 # Allow wildcard imports from modules that define __all__.
 allow-wildcard-with-all=no

 # Analyse import fallback blocks. This can be used to support both Python 2 and
 # 3 compatible code, which means that the block might have code that exists
 # only in one or another interpreter, leading to false positives when analysed.
 analyse-fallback-blocks=no

 # Deprecated modules which should not be used, separated by a comma.
 deprecated-modules=optparse,tkinter.tix

 # Create a graph of external dependencies in the given file (report RP0402 must
 # not be disabled).
 ext-import-graph=

 # Create a graph of every (i.e. internal and external) dependencies in the
 # given file (report RP0402 must not be disabled).
 import-graph=

 # Create a graph of internal dependencies in the given file (report RP0402 must
 # not be disabled).
 int-import-graph=

 # Force import order to recognize a module as part of the standard
 # compatibility libraries.
 known-standard-library=

 # Force import order to recognize a module as part of a third party library.
 known-third-party=enchant

 # Couples of modules and preferred modules, separated by a comma.
 preferred-modules=


 [EXCEPTIONS]

 # Exceptions that will emit a warning when being caught. Defaults to
 # "BaseException, Exception".
 overgeneral-exceptions=BaseException,
                        Exception
	[MASTER] # inclusive-language: ignore

	# A comma-separated list of package or module names from where C extensions may
	# be loaded. Extensions are loading into the active Python interpreter and may
	# run arbitrary code.
	# inclusive-language: disable
	# TODO(pwbug/280) Change "whitelist" to "allowlist". (Blocked on pylint.)
	extension-pkg-whitelist=mypy
	# inclusive-language: enable

	# Add files or directories to the blocklist. They should be base names, not
	# paths.
	ignore=CVS

	# Add files or directories matching the regex patterns to the blocklist. The
	# regex matches against base names, not paths.
	ignore-patterns=

	# Python code to execute, usually for sys.path manipulation such as
	# pygtk.require().
	#init-hook=

	# Use multiple processes to speed up Pylint. Specifying 0 will auto-detect the
	# number of processors available to use.
	jobs=0

	# Control the amount of potential inferred values when inferring a single
	# object. This can help the performance when dealing with large functions or
	# complex, nested conditions.
	limit-inference-results=100

	# List of plugins (as comma separated values of python module names) to load,
	# usually to register additional checkers.
	load-plugins=

	# Pickle collected data for later comparisons.
	persistent=yes

	# Specify a configuration file.
	#rcfile=

	# When enabled, pylint would attempt to guess common misconfiguration and emit
	# user-friendly hints instead of false-positive error messages.
	suggestion-mode=yes

	# Allow loading of arbitrary C extensions. Extensions are imported into the
	# active Python interpreter and may run arbitrary code.
	unsafe-load-any-extension=no


	[MESSAGES CONTROL]

	# Only show warnings with the listed confidence levels. Leave empty to show
	# all. Valid levels: HIGH, INFERENCE, INFERENCE_FAILURE, UNDEFINED.
	confidence=

	# Disable the message, report, category or checker with the given id(s). You
	# can either give multiple identifiers separated by comma (,) or put this
	# option multiple times (only on the command line, not in the configuration
	# file where it should appear only once). You can also use "--disable=all" to
	# disable everything first and then reenable specific checks. For example, if
	# you want to run only the similarities checker, you can use "--disable=all
	# --enable=similarities". If you want to run only the classes checker, but have
	# no Warning level messages displayed, use "--disable=all --enable=classes
	# --disable=W".
	disable=bad-continuation, # Rely on yapf for formatting
	fixme,
	subprocess-run-check,
	raise-missing-from,

	# Enable the message, report, category or checker with the given id(s). You can
	# either give multiple identifier separated by comma (,) or put this option
	# multiple time (only on the command line, not in the configuration file where
	# it should appear only once). See also the "--disable" option for examples.
	enable=c-extension-no-member,


	[REPORTS]

	# Python expression which should return a score less than or equal to 10. You
	# have access to the variables 'error', 'warning', 'refactor', and 'convention'
	# which contain the number of messages in each category, as well as 'statement'
	# which is the total number of statements analyzed. This score is used by the
	# global evaluation report (RP0004).
	evaluation=10.0 - ((float(5 * error + warning + refactor + convention) / statement) * 10)

	# Template used to display messages. This is a python new-style format string
	# used to format the message information. See doc for all details.
	#msg-template=

	# Set the output format. Available formats are text, parseable, colorized, json
	# and msvs (visual studio). You can also give a reporter class, e.g.
	# mypackage.mymodule.MyReporterClass.
	output-format=colorized

	# Tells whether to display a full report or only the messages.
	reports=no

	# Activate the evaluation score.
	score=no


	[REFACTORING]

	# Maximum number of nested blocks for function / method body
	max-nested-blocks=5

	# Complete name of functions that never returns. When checking for
	# inconsistent-return-statements if a never returning function is called then
	# it will be considered as an explicit return statement and no message will be
	# printed.
	never-returning-functions=sys.exit


	[FORMAT]

	# Expected format of line ending, e.g. empty (any line ending), LF or CRLF.
	expected-line-ending-format=LF

	# Regexp for a line that is allowed to be longer than the limit.
	ignore-long-lines=^\s*(# )?<?https?://\S+>?$

	# Number of spaces of indent required inside a hanging or continued line.
	indent-after-paren=4

	# String used as indentation unit. This is usually " " (4 spaces) or "\t" (1
	# tab).
	indent-string=' '

	# Maximum number of characters on a single line.
	max-line-length=80

	# Maximum number of lines in a module.
	max-module-lines=9999

	# List of optional constructs for which whitespace checking is disabled. `dict-
	# separator` is used to allow tabulation in dicts, etc.: {1 : 1,\n222: 2}.
	# `trailing-comma` allows a space between comma and closing bracket: (a, ).
	# `empty-line` allows space-only lines.
	no-space-check=trailing-comma,
	dict-separator

	# Allow the body of a class to be on the same line as the declaration if body
	# contains single statement.
	single-line-class-stmt=no

	# Allow the body of an if to be on the same line as the test if there is no
	# else.
	single-line-if-stmt=no


	[VARIABLES]

	# List of additional names supposed to be defined in builtins. Remember that
	# you should avoid defining new builtins when possible.
	additional-builtins=

	# Tells whether unused global variables should be treated as a violation.
	allow-global-unused-variables=yes

	# List of strings which can identify a callback function by name. A callback
	# name must start or end with one of those strings.
	callbacks=cb_,
	_cb

	# A regular expression matching the name of placeholder variables (i.e.
	# expected to not be used). # inclusive-language: ignore
	dummy-variables-rgx=_+$\|(_[a-zA-Z0-9_]*[a-zA-Z0-9]+?$)\|dummy\|^ignored_\|^unused_

	# Argument names that match this expression will be ignored. Default to name
	# with leading underscore.
	ignored-argument-names=_.*\|^ignored_\|^unused_

	# Tells whether we should check for unused import in __init__ files.
	init-import=no

	# List of qualified module names which can have objects that can redefine
	# builtins.
	redefining-builtins-modules=six.moves,past.builtins,future.builtins,builtins,io


	[SPELLING]

	# Limits count of emitted suggestions for spelling mistakes.
	max-spelling-suggestions=4

	# Spelling dictionary name. Available dictionaries: none. To make it work,
	# install the python-enchant package.
	spelling-dict=

	# List of comma separated words that should not be checked.
	spelling-ignore-words=

	# A path to a file that contains the private dictionary; one word per line.
	spelling-private-dict-file=

	# Tells whether to store unknown words to the private dictionary (see the
	# --spelling-private-dict-file option) instead of raising a message.
	spelling-store-unknown-words=no


	[LOGGING]

	# Format style used to check logging format string. `old` means using %
	# formatting, `new` is for `{}` formatting,and `fstr` is for f-strings.
	logging-format-style=old

	# Logging modules to check that the string format arguments are in logging
	# function parameter format.
	logging-modules=logging


	[SIMILARITIES]

	# Ignore comments when computing similarities.
	ignore-comments=yes

	# Ignore docstrings when computing similarities.
	ignore-docstrings=yes

	# Ignore imports when computing similarities.
	ignore-imports=no

	# Minimum lines number of a similarity.
	min-similarity-lines=4


	[MISCELLANEOUS]

	# List of note tags to take in consideration, separated by a comma.
	notes=FIXME,
	XXX,
	TODO


	[STRING]

	# This flag controls whether the implicit-str-concat-in-sequence should
	# generate a warning on implicit string concatenation in sequences defined over
	# several lines.
	check-str-concat-over-line-jumps=no


	[BASIC]

	# Naming style matching correct argument names.
	argument-naming-style=snake_case

	# Regular expression matching correct argument names. Overrides argument-
	# naming-style.
	#argument-rgx=

	# Naming style matching correct attribute names.
	attr-naming-style=snake_case

	# Regular expression matching correct attribute names. Overrides attr-naming-
	# style.
	#attr-rgx=

	# Bad variable names which should always be refused, separated by a comma.
	bad-names=foo,
	bar,
	baz,
	toto,
	tutu,
	tata

	# Naming style matching correct class attribute names.
	class-attribute-naming-style=any

	# Regular expression matching correct class attribute names. Overrides class-
	# attribute-naming-style.
	#class-attribute-rgx=

	# Naming style matching correct class names.
	class-naming-style=PascalCase

	# Regular expression matching correct class names. Overrides class-naming-
	# style.
	#class-rgx=

	# Naming style matching correct constant names.
	const-naming-style=UPPER_CASE

	# Regular expression matching correct constant names. Overrides const-naming-
	# style.
	const-rgx=^(_?[A-Z][A-Z0-9_]\|__[a-z0-9_]+__\|_?[a-z][a-z0-9_])$

	# Minimum line length for functions/classes that require docstrings, shorter
	# ones are exempt.
	docstring-min-length=30

	# Naming style matching correct function names.
	function-naming-style=snake_case

	# Regular expression matching correct function names. Overrides function-
	# naming-style.
	#function-rgx=

	# Good variable names which should always be accepted, separated by a comma.
	good-names=i,
	j,
	k,
	db,
	ex,
	fd,
	id,
	ok,
	Run,
	T,
	_

	# Include a hint for the correct naming format with invalid-name.
	include-naming-hint=no

	# Naming style matching correct inline iteration names.
	inlinevar-naming-style=any

	# Regular expression matching correct inline iteration names. Overrides
	# inlinevar-naming-style.
	#inlinevar-rgx=

	# Naming style matching correct method names.
	method-naming-style=snake_case

	# Regular expression matching correct method names. Overrides method-naming-
	# style.
	#method-rgx=

	# Naming style matching correct module names.
	module-naming-style=snake_case

	# Regular expression matching correct module names. Overrides module-naming-
	# style.
	#module-rgx=

	# Colon-delimited sets of names that determine each other's naming style when
	# the name regexes allow several styles.
	name-group=

	# Regular expression which should only match function or class names that do
	# not require a docstring.
	no-docstring-rgx=^_

	# List of decorators that produce properties, such as abc.abstractproperty. Add
	# to this list to register other decorators that produce valid properties.
	# These decorators are taken in consideration only for invalid-name.
	property-classes=abc.abstractproperty

	# Naming style matching correct variable names.
	variable-naming-style=snake_case

	# Regular expression matching correct variable names. Overrides variable-
	# naming-style.
	#variable-rgx=


	[TYPECHECK]

	# List of decorators that produce context managers, such as
	# contextlib.contextmanager. Add to this list to register other decorators that
	# produce valid context managers.
	contextmanager-decorators=contextlib.contextmanager

	# List of members which are set dynamically and missed by pylint inference
	# system, and so shouldn't trigger E1101 when accessed. Python regular
	# expressions are accepted.
	generated-members=descriptor_pb2.,plugin_pb2.

	# Tells whether missing members accessed in mixin class should be ignored. A
	# mixin class is detected if its name ends with "mixin" (case insensitive).
	ignore-mixin-members=yes

	# Tells whether to warn about missing members when the owner of the attribute
	# is inferred to be None.
	ignore-none=yes

	# This flag controls whether pylint should warn about no-member and similar
	# checks whenever an opaque object is returned when inferring. The inference
	# can return multiple potential results while evaluating a Python object, but
	# some branches might not be evaluated, which results in partial inference. In
	# that case, it might be useful to still emit no-member and other checks for
	# the rest of the inferred objects.
	ignore-on-opaque-inference=yes

	# List of class names for which member attributes should not be checked (useful
	# for classes with dynamically set attributes). This supports the use of
	# qualified names.
	ignored-classes=optparse.Values,
	thread._local,
	_thread._local,
	pw_cli.envparse.EnvNamespace

	# List of module names for which member attributes should not be checked
	# (useful for modules/projects where namespaces are manipulated during runtime
	# and thus existing member attributes cannot be deduced by static analysis). It
	# supports qualified module names, as well as Unix pattern matching.
	ignored-modules=*_pb2

	# Show a hint with possible names when a member name was not found. The aspect
	# of finding the hint is based on edit distance.
	missing-member-hint=yes

	# The minimum edit distance a name should have in order to be considered a
	# similar match for a missing member name.
	missing-member-hint-distance=1

	# The total number of similar names that should be taken in consideration when
	# showing a hint for a missing member.
	missing-member-max-choices=1

	# List of decorators that change the signature of a decorated function.
	signature-mutators=


	[DESIGN]

	# Maximum number of arguments for function / method.
	max-args=10

	# Maximum number of attributes for a class (see R0902).
	max-attributes=11

	# Maximum number of boolean expressions in an if statement (see R0916).
	max-bool-expr=5

	# Maximum number of branch for function / method body.
	max-branches=25

	# Maximum number of locals for function / method body.
	max-locals=25

	# Maximum number of parents for a class (see R0901).
	max-parents=7

	# Maximum number of public methods for a class (see R0904).
	max-public-methods=25

	# Maximum number of return / yield for function / method body.
	max-returns=10

	# Maximum number of statements in function / method body.
	max-statements=100

	# Minimum number of public methods for a class (see R0903).
	min-public-methods=0


	[CLASSES]

	# List of method names used to declare (i.e. assign) instance attributes.
	defining-attr-methods=__init__,
	__new__,
	setUp,
	__post_init__

	# List of member names, which should be excluded from the protected access
	# warning.
	exclude-protected=_asdict,
	_fields,
	_replace,
	_source,
	_make

	# List of valid names for the first argument in a class method.
	valid-classmethod-first-arg=cls

	# List of valid names for the first argument in a metaclass class method.
	valid-metaclass-classmethod-first-arg=cls


	[IMPORTS]

	# List of modules that can be imported at any level, not just the top level
	# one.
	allow-any-import-level=

	# Allow wildcard imports from modules that define __all__.
	allow-wildcard-with-all=no

	# Analyse import fallback blocks. This can be used to support both Python 2 and
	# 3 compatible code, which means that the block might have code that exists
	# only in one or another interpreter, leading to false positives when analysed.
	analyse-fallback-blocks=no

	# Deprecated modules which should not be used, separated by a comma.
	deprecated-modules=optparse,tkinter.tix

	# Create a graph of external dependencies in the given file (report RP0402 must
	# not be disabled).
	ext-import-graph=

	# Create a graph of every (i.e. internal and external) dependencies in the
	# given file (report RP0402 must not be disabled).
	import-graph=

	# Create a graph of internal dependencies in the given file (report RP0402 must
	# not be disabled).
	int-import-graph=

	# Force import order to recognize a module as part of the standard
	# compatibility libraries.
	known-standard-library=

	# Force import order to recognize a module as part of a third party library.
	known-third-party=enchant

	# Couples of modules and preferred modules, separated by a comma.
	preferred-modules=


	[EXCEPTIONS]

	# Exceptions that will emit a warning when being caught. Defaults to
	# "BaseException, Exception".
	overgeneral-exceptions=BaseException,
	Exception