| """ |
| Read and write ZIP files. |
| """ |
| import struct, os, time, sys, shutil |
| import binascii, cStringIO, stat |
| |
| try: |
| import zlib # We may need its compression method |
| crc32 = zlib.crc32 |
| except ImportError: |
| zlib = None |
| crc32 = binascii.crc32 |
| |
| __all__ = ["BadZipfile", "error", "ZIP_STORED", "ZIP_DEFLATED", "is_zipfile", |
| "ZipInfo", "ZipFile", "PyZipFile", "LargeZipFile" ] |
| |
| class BadZipfile(Exception): |
| pass |
| |
| |
| class LargeZipFile(Exception): |
| """ |
| Raised when writing a zipfile, the zipfile requires ZIP64 extensions |
| and those extensions are disabled. |
| """ |
| |
| error = BadZipfile # The exception raised by this module |
| |
| ZIP64_LIMIT = (1 << 31) - 1 |
| ZIP_FILECOUNT_LIMIT = 1 << 16 |
| ZIP_MAX_COMMENT = (1 << 16) - 1 |
| |
| # constants for Zip file compression methods |
| ZIP_STORED = 0 |
| ZIP_DEFLATED = 8 |
| # Other ZIP compression methods not supported |
| |
| # Below are some formats and associated data for reading/writing headers using |
| # the struct module. The names and structures of headers/records are those used |
| # in the PKWARE description of the ZIP file format: |
| # http://www.pkware.com/documents/casestudies/APPNOTE.TXT |
| # (URL valid as of January 2008) |
| |
| # The "end of central directory" structure, magic number, size, and indices |
| # (section V.I in the format document) |
| structEndArchive = "<4s4H2LH" |
| stringEndArchive = "PK\005\006" |
| sizeEndCentDir = struct.calcsize(structEndArchive) |
| |
| _ECD_SIGNATURE = 0 |
| _ECD_DISK_NUMBER = 1 |
| _ECD_DISK_START = 2 |
| _ECD_ENTRIES_THIS_DISK = 3 |
| _ECD_ENTRIES_TOTAL = 4 |
| _ECD_SIZE = 5 |
| _ECD_OFFSET = 6 |
| _ECD_COMMENT_SIZE = 7 |
| # These last two indices are not part of the structure as defined in the |
| # spec, but they are used internally by this module as a convenience |
| _ECD_COMMENT = 8 |
| _ECD_LOCATION = 9 |
| |
| # The "central directory" structure, magic number, size, and indices |
| # of entries in the structure (section V.F in the format document) |
| structCentralDir = "<4s4B4HL2L5H2L" |
| stringCentralDir = "PK\001\002" |
| sizeCentralDir = struct.calcsize(structCentralDir) |
| |
| # indexes of entries in the central directory structure |
| _CD_SIGNATURE = 0 |
| _CD_CREATE_VERSION = 1 |
| _CD_CREATE_SYSTEM = 2 |
| _CD_EXTRACT_VERSION = 3 |
| _CD_EXTRACT_SYSTEM = 4 |
| _CD_FLAG_BITS = 5 |
| _CD_COMPRESS_TYPE = 6 |
| _CD_TIME = 7 |
| _CD_DATE = 8 |
| _CD_CRC = 9 |
| _CD_COMPRESSED_SIZE = 10 |
| _CD_UNCOMPRESSED_SIZE = 11 |
| _CD_FILENAME_LENGTH = 12 |
| _CD_EXTRA_FIELD_LENGTH = 13 |
| _CD_COMMENT_LENGTH = 14 |
| _CD_DISK_NUMBER_START = 15 |
| _CD_INTERNAL_FILE_ATTRIBUTES = 16 |
| _CD_EXTERNAL_FILE_ATTRIBUTES = 17 |
| _CD_LOCAL_HEADER_OFFSET = 18 |
| |
| # The "local file header" structure, magic number, size, and indices |
| # (section V.A in the format document) |
| structFileHeader = "<4s2B4HL2L2H" |
| stringFileHeader = "PK\003\004" |
| sizeFileHeader = struct.calcsize(structFileHeader) |
| |
| _FH_SIGNATURE = 0 |
| _FH_EXTRACT_VERSION = 1 |
| _FH_EXTRACT_SYSTEM = 2 |
| _FH_GENERAL_PURPOSE_FLAG_BITS = 3 |
| _FH_COMPRESSION_METHOD = 4 |
| _FH_LAST_MOD_TIME = 5 |
| _FH_LAST_MOD_DATE = 6 |
| _FH_CRC = 7 |
| _FH_COMPRESSED_SIZE = 8 |
| _FH_UNCOMPRESSED_SIZE = 9 |
| _FH_FILENAME_LENGTH = 10 |
| _FH_EXTRA_FIELD_LENGTH = 11 |
| |
| # The "Zip64 end of central directory locator" structure, magic number, and size |
| structEndArchive64Locator = "<4sLQL" |
| stringEndArchive64Locator = "PK\x06\x07" |
| sizeEndCentDir64Locator = struct.calcsize(structEndArchive64Locator) |
| |
| # The "Zip64 end of central directory" record, magic number, size, and indices |
| # (section V.G in the format document) |
| structEndArchive64 = "<4sQ2H2L4Q" |
| stringEndArchive64 = "PK\x06\x06" |
| sizeEndCentDir64 = struct.calcsize(structEndArchive64) |
| |
| _CD64_SIGNATURE = 0 |
| _CD64_DIRECTORY_RECSIZE = 1 |
| _CD64_CREATE_VERSION = 2 |
| _CD64_EXTRACT_VERSION = 3 |
| _CD64_DISK_NUMBER = 4 |
| _CD64_DISK_NUMBER_START = 5 |
| _CD64_NUMBER_ENTRIES_THIS_DISK = 6 |
| _CD64_NUMBER_ENTRIES_TOTAL = 7 |
| _CD64_DIRECTORY_SIZE = 8 |
| _CD64_OFFSET_START_CENTDIR = 9 |
| |
| def _check_zipfile(fp): |
| try: |
| if _EndRecData(fp): |
| return True # file has correct magic number |
| except IOError: |
| pass |
| return False |
| |
| def is_zipfile(filename): |
| """Quickly see if a file is a ZIP file by checking the magic number. |
| |
| The filename argument may be a file or file-like object too. |
| """ |
| result = False |
| try: |
| if hasattr(filename, "read"): |
| result = _check_zipfile(fp=filename) |
| else: |
| with open(filename, "rb") as fp: |
| result = _check_zipfile(fp) |
| except IOError: |
| pass |
| return result |
| |
| def _EndRecData64(fpin, offset, endrec): |
| """ |
| Read the ZIP64 end-of-archive records and use that to update endrec |
| """ |
| fpin.seek(offset - sizeEndCentDir64Locator, 2) |
| data = fpin.read(sizeEndCentDir64Locator) |
| sig, diskno, reloff, disks = struct.unpack(structEndArchive64Locator, data) |
| if sig != stringEndArchive64Locator: |
| return endrec |
| |
| if diskno != 0 or disks != 1: |
| raise BadZipfile("zipfiles that span multiple disks are not supported") |
| |
| # Assume no 'zip64 extensible data' |
| fpin.seek(offset - sizeEndCentDir64Locator - sizeEndCentDir64, 2) |
| data = fpin.read(sizeEndCentDir64) |
| sig, sz, create_version, read_version, disk_num, disk_dir, \ |
| dircount, dircount2, dirsize, diroffset = \ |
| struct.unpack(structEndArchive64, data) |
| if sig != stringEndArchive64: |
| return endrec |
| |
| # Update the original endrec using data from the ZIP64 record |
| endrec[_ECD_SIGNATURE] = sig |
| endrec[_ECD_DISK_NUMBER] = disk_num |
| endrec[_ECD_DISK_START] = disk_dir |
| endrec[_ECD_ENTRIES_THIS_DISK] = dircount |
| endrec[_ECD_ENTRIES_TOTAL] = dircount2 |
| endrec[_ECD_SIZE] = dirsize |
| endrec[_ECD_OFFSET] = diroffset |
| return endrec |
| |
| |
| def _EndRecData(fpin): |
| """Return data from the "End of Central Directory" record, or None. |
| |
| The data is a list of the nine items in the ZIP "End of central dir" |
| record followed by a tenth item, the file seek offset of this record.""" |
| |
| # Determine file size |
| fpin.seek(0, 2) |
| filesize = fpin.tell() |
| |
| # Check to see if this is ZIP file with no archive comment (the |
| # "end of central directory" structure should be the last item in the |
| # file if this is the case). |
| fpin.seek(-sizeEndCentDir, 2) |
| data = fpin.read() |
| if data[0:4] == stringEndArchive and data[-2:] == "\000\000": |
| # the signature is correct and there's no comment, unpack structure |
| endrec = struct.unpack(structEndArchive, data) |
| endrec=list(endrec) |
| |
| # Append a blank comment and record start offset |
| endrec.append("") |
| endrec.append(filesize - sizeEndCentDir) |
| |
| # Try to read the "Zip64 end of central directory" structure |
| return _EndRecData64(fpin, -sizeEndCentDir, endrec) |
| |
| # Either this is not a ZIP file, or it is a ZIP file with an archive |
| # comment. Search the end of the file for the "end of central directory" |
| # record signature. The comment is the last item in the ZIP file and may be |
| # up to 64K long. It is assumed that the "end of central directory" magic |
| # number does not appear in the comment. |
| maxCommentStart = max(filesize - (1 << 16) - sizeEndCentDir, 0) |
| fpin.seek(maxCommentStart, 0) |
| data = fpin.read() |
| start = data.rfind(stringEndArchive) |
| if start >= 0: |
| # found the magic number; attempt to unpack and interpret |
| recData = data[start:start+sizeEndCentDir] |
| endrec = list(struct.unpack(structEndArchive, recData)) |
| comment = data[start+sizeEndCentDir:] |
| # check that comment length is correct |
| if endrec[_ECD_COMMENT_SIZE] == len(comment): |
| # Append the archive comment and start offset |
| endrec.append(comment) |
| endrec.append(maxCommentStart + start) |
| |
| # Try to read the "Zip64 end of central directory" structure |
| return _EndRecData64(fpin, maxCommentStart + start - filesize, |
| endrec) |
| |
| # Unable to find a valid end of central directory structure |
| return |
| |
| |
| class ZipInfo (object): |
| """Class with attributes describing each file in the ZIP archive.""" |
| |
| __slots__ = ( |
| 'orig_filename', |
| 'filename', |
| 'date_time', |
| 'compress_type', |
| 'comment', |
| 'extra', |
| 'create_system', |
| 'create_version', |
| 'extract_version', |
| 'reserved', |
| 'flag_bits', |
| 'volume', |
| 'internal_attr', |
| 'external_attr', |
| 'header_offset', |
| 'CRC', |
| 'compress_size', |
| 'file_size', |
| '_raw_time', |
| ) |
| |
| def __init__(self, filename="NoName", date_time=(1980,1,1,0,0,0)): |
| self.orig_filename = filename # Original file name in archive |
| |
| # Terminate the file name at the first null byte. Null bytes in file |
| # names are used as tricks by viruses in archives. |
| null_byte = filename.find(chr(0)) |
| if null_byte >= 0: |
| filename = filename[0:null_byte] |
| # This is used to ensure paths in generated ZIP files always use |
| # forward slashes as the directory separator, as required by the |
| # ZIP format specification. |
| if os.sep != "/" and os.sep in filename: |
| filename = filename.replace(os.sep, "/") |
| |
| self.filename = filename # Normalized file name |
| self.date_time = date_time # year, month, day, hour, min, sec |
| # Standard values: |
| self.compress_type = ZIP_STORED # Type of compression for the file |
| self.comment = "" # Comment for each file |
| self.extra = "" # ZIP extra data |
| if sys.platform == 'win32': |
| self.create_system = 0 # System which created ZIP archive |
| else: |
| # Assume everything else is unix-y |
| self.create_system = 3 # System which created ZIP archive |
| self.create_version = 20 # Version which created ZIP archive |
| self.extract_version = 20 # Version needed to extract archive |
| self.reserved = 0 # Must be zero |
| self.flag_bits = 0 # ZIP flag bits |
| self.volume = 0 # Volume number of file header |
| self.internal_attr = 0 # Internal attributes |
| self.external_attr = 0 # External file attributes |
| # Other attributes are set by class ZipFile: |
| # header_offset Byte offset to the file header |
| # CRC CRC-32 of the uncompressed file |
| # compress_size Size of the compressed file |
| # file_size Size of the uncompressed file |
| |
| def FileHeader(self): |
| """Return the per-file header as a string.""" |
| dt = self.date_time |
| dosdate = (dt[0] - 1980) << 9 | dt[1] << 5 | dt[2] |
| dostime = dt[3] << 11 | dt[4] << 5 | (dt[5] // 2) |
| if self.flag_bits & 0x08: |
| # Set these to zero because we write them after the file data |
| CRC = compress_size = file_size = 0 |
| else: |
| CRC = self.CRC |
| compress_size = self.compress_size |
| file_size = self.file_size |
| |
| extra = self.extra |
| |
| if file_size > ZIP64_LIMIT or compress_size > ZIP64_LIMIT: |
| # File is larger than what fits into a 4 byte integer, |
| # fall back to the ZIP64 extension |
| fmt = '<HHQQ' |
| extra = extra + struct.pack(fmt, |
| 1, struct.calcsize(fmt)-4, file_size, compress_size) |
| file_size = 0xffffffff |
| compress_size = 0xffffffff |
| self.extract_version = max(45, self.extract_version) |
| self.create_version = max(45, self.extract_version) |
| |
| filename, flag_bits = self._encodeFilenameFlags() |
| header = struct.pack(structFileHeader, stringFileHeader, |
| self.extract_version, self.reserved, flag_bits, |
| self.compress_type, dostime, dosdate, CRC, |
| compress_size, file_size, |
| len(filename), len(extra)) |
| return header + filename + extra |
| |
| def _encodeFilenameFlags(self): |
| if isinstance(self.filename, unicode): |
| try: |
| return self.filename.encode('ascii'), self.flag_bits |
| except UnicodeEncodeError: |
| return self.filename.encode('utf-8'), self.flag_bits | 0x800 |
| else: |
| return self.filename, self.flag_bits |
| |
| def _decodeFilename(self): |
| if self.flag_bits & 0x800: |
| return self.filename.decode('utf-8') |
| else: |
| return self.filename |
| |
| def _decodeExtra(self): |
| # Try to decode the extra field. |
| extra = self.extra |
| unpack = struct.unpack |
| while extra: |
| tp, ln = unpack('<HH', extra[:4]) |
| if tp == 1: |
| if ln >= 24: |
| counts = unpack('<QQQ', extra[4:28]) |
| elif ln == 16: |
| counts = unpack('<QQ', extra[4:20]) |
| elif ln == 8: |
| counts = unpack('<Q', extra[4:12]) |
| elif ln == 0: |
| counts = () |
| else: |
| raise RuntimeError, "Corrupt extra field %s"%(ln,) |
| |
| idx = 0 |
| |
| # ZIP64 extension (large files and/or large archives) |
| if self.file_size in (0xffffffffffffffffL, 0xffffffffL): |
| self.file_size = counts[idx] |
| idx += 1 |
| |
| if self.compress_size == 0xFFFFFFFFL: |
| self.compress_size = counts[idx] |
| idx += 1 |
| |
| if self.header_offset == 0xffffffffL: |
| old = self.header_offset |
| self.header_offset = counts[idx] |
| idx+=1 |
| |
| extra = extra[ln+4:] |
| |
| |
| class _ZipDecrypter: |
| """Class to handle decryption of files stored within a ZIP archive. |
| |
| ZIP supports a password-based form of encryption. Even though known |
| plaintext attacks have been found against it, it is still useful |
| to be able to get data out of such a file. |
| |
| Usage: |
| zd = _ZipDecrypter(mypwd) |
| plain_char = zd(cypher_char) |
| plain_text = map(zd, cypher_text) |
| """ |
| |
| def _GenerateCRCTable(): |
| """Generate a CRC-32 table. |
| |
| ZIP encryption uses the CRC32 one-byte primitive for scrambling some |
| internal keys. We noticed that a direct implementation is faster than |
| relying on binascii.crc32(). |
| """ |
| poly = 0xedb88320 |
| table = [0] * 256 |
| for i in range(256): |
| crc = i |
| for j in range(8): |
| if crc & 1: |
| crc = ((crc >> 1) & 0x7FFFFFFF) ^ poly |
| else: |
| crc = ((crc >> 1) & 0x7FFFFFFF) |
| table[i] = crc |
| return table |
| crctable = _GenerateCRCTable() |
| |
| def _crc32(self, ch, crc): |
| """Compute the CRC32 primitive on one byte.""" |
| return ((crc >> 8) & 0xffffff) ^ self.crctable[(crc ^ ord(ch)) & 0xff] |
| |
| def __init__(self, pwd): |
| self.key0 = 305419896 |
| self.key1 = 591751049 |
| self.key2 = 878082192 |
| for p in pwd: |
| self._UpdateKeys(p) |
| |
| def _UpdateKeys(self, c): |
| self.key0 = self._crc32(c, self.key0) |
| self.key1 = (self.key1 + (self.key0 & 255)) & 4294967295 |
| self.key1 = (self.key1 * 134775813 + 1) & 4294967295 |
| self.key2 = self._crc32(chr((self.key1 >> 24) & 255), self.key2) |
| |
| def __call__(self, c): |
| """Decrypt a single character.""" |
| c = ord(c) |
| k = self.key2 | 2 |
| c = c ^ (((k * (k^1)) >> 8) & 255) |
| c = chr(c) |
| self._UpdateKeys(c) |
| return c |
| |
| class ZipExtFile: |
| """File-like object for reading an archive member. |
| Is returned by ZipFile.open(). |
| """ |
| |
| def __init__(self, fileobj, zipinfo, decrypt=None): |
| self.fileobj = fileobj |
| self.decrypter = decrypt |
| self.bytes_read = 0L |
| self.rawbuffer = '' |
| self.readbuffer = '' |
| self.linebuffer = '' |
| self.eof = False |
| self.univ_newlines = False |
| self.nlSeps = ("\n", ) |
| self.lastdiscard = '' |
| |
| self.compress_type = zipinfo.compress_type |
| self.compress_size = zipinfo.compress_size |
| |
| self.closed = False |
| self.mode = "r" |
| self.name = zipinfo.filename |
| |
| # read from compressed files in 64k blocks |
| self.compreadsize = 64*1024 |
| if self.compress_type == ZIP_DEFLATED: |
| self.dc = zlib.decompressobj(-15) |
| |
| def set_univ_newlines(self, univ_newlines): |
| self.univ_newlines = univ_newlines |
| |
| # pick line separator char(s) based on universal newlines flag |
| self.nlSeps = ("\n", ) |
| if self.univ_newlines: |
| self.nlSeps = ("\r\n", "\r", "\n") |
| |
| def __iter__(self): |
| return self |
| |
| def next(self): |
| nextline = self.readline() |
| if not nextline: |
| raise StopIteration() |
| |
| return nextline |
| |
| def close(self): |
| self.closed = True |
| |
| def _checkfornewline(self): |
| nl, nllen = -1, -1 |
| if self.linebuffer: |
| # ugly check for cases where half of an \r\n pair was |
| # read on the last pass, and the \r was discarded. In this |
| # case we just throw away the \n at the start of the buffer. |
| if (self.lastdiscard, self.linebuffer[0]) == ('\r','\n'): |
| self.linebuffer = self.linebuffer[1:] |
| |
| for sep in self.nlSeps: |
| nl = self.linebuffer.find(sep) |
| if nl >= 0: |
| nllen = len(sep) |
| return nl, nllen |
| |
| return nl, nllen |
| |
| def readline(self, size = -1): |
| """Read a line with approx. size. If size is negative, |
| read a whole line. |
| """ |
| if size < 0: |
| size = sys.maxint |
| elif size == 0: |
| return '' |
| |
| # check for a newline already in buffer |
| nl, nllen = self._checkfornewline() |
| |
| if nl >= 0: |
| # the next line was already in the buffer |
| nl = min(nl, size) |
| else: |
| # no line break in buffer - try to read more |
| size -= len(self.linebuffer) |
| while nl < 0 and size > 0: |
| buf = self.read(min(size, 100)) |
| if not buf: |
| break |
| self.linebuffer += buf |
| size -= len(buf) |
| |
| # check for a newline in buffer |
| nl, nllen = self._checkfornewline() |
| |
| # we either ran out of bytes in the file, or |
| # met the specified size limit without finding a newline, |
| # so return current buffer |
| if nl < 0: |
| s = self.linebuffer |
| self.linebuffer = '' |
| return s |
| |
| buf = self.linebuffer[:nl] |
| self.lastdiscard = self.linebuffer[nl:nl + nllen] |
| self.linebuffer = self.linebuffer[nl + nllen:] |
| |
| # line is always returned with \n as newline char (except possibly |
| # for a final incomplete line in the file, which is handled above). |
| return buf + "\n" |
| |
| def readlines(self, sizehint = -1): |
| """Return a list with all (following) lines. The sizehint parameter |
| is ignored in this implementation. |
| """ |
| result = [] |
| while True: |
| line = self.readline() |
| if not line: break |
| result.append(line) |
| return result |
| |
| def read(self, size = None): |
| # act like file() obj and return empty string if size is 0 |
| if size == 0: |
| return '' |
| |
| # determine read size |
| bytesToRead = self.compress_size - self.bytes_read |
| |
| # adjust read size for encrypted files since the first 12 bytes |
| # are for the encryption/password information |
| if self.decrypter is not None: |
| bytesToRead -= 12 |
| |
| if size is not None and size >= 0: |
| if self.compress_type == ZIP_STORED: |
| lr = len(self.readbuffer) |
| bytesToRead = min(bytesToRead, size - lr) |
| elif self.compress_type == ZIP_DEFLATED: |
| if len(self.readbuffer) > size: |
| # the user has requested fewer bytes than we've already |
| # pulled through the decompressor; don't read any more |
| bytesToRead = 0 |
| else: |
| # user will use up the buffer, so read some more |
| lr = len(self.rawbuffer) |
| bytesToRead = min(bytesToRead, self.compreadsize - lr) |
| |
| # avoid reading past end of file contents |
| if bytesToRead + self.bytes_read > self.compress_size: |
| bytesToRead = self.compress_size - self.bytes_read |
| |
| # try to read from file (if necessary) |
| if bytesToRead > 0: |
| bytes = self.fileobj.read(bytesToRead) |
| self.bytes_read += len(bytes) |
| self.rawbuffer += bytes |
| |
| # handle contents of raw buffer |
| if self.rawbuffer: |
| newdata = self.rawbuffer |
| self.rawbuffer = '' |
| |
| # decrypt new data if we were given an object to handle that |
| if newdata and self.decrypter is not None: |
| newdata = ''.join(map(self.decrypter, newdata)) |
| |
| # decompress newly read data if necessary |
| if newdata and self.compress_type == ZIP_DEFLATED: |
| newdata = self.dc.decompress(newdata) |
| self.rawbuffer = self.dc.unconsumed_tail |
| if self.eof and len(self.rawbuffer) == 0: |
| # we're out of raw bytes (both from the file and |
| # the local buffer); flush just to make sure the |
| # decompressor is done |
| newdata += self.dc.flush() |
| # prevent decompressor from being used again |
| self.dc = None |
| |
| self.readbuffer += newdata |
| |
| |
| # return what the user asked for |
| if size is None or len(self.readbuffer) <= size: |
| bytes = self.readbuffer |
| self.readbuffer = '' |
| else: |
| bytes = self.readbuffer[:size] |
| self.readbuffer = self.readbuffer[size:] |
| |
| return bytes |
| |
| |
| class ZipFile: |
| """ Class with methods to open, read, write, close, list zip files. |
| |
| z = ZipFile(file, mode="r", compression=ZIP_STORED, allowZip64=False) |
| |
| file: Either the path to the file, or a file-like object. |
| If it is a path, the file will be opened and closed by ZipFile. |
| mode: The mode can be either read "r", write "w" or append "a". |
| compression: ZIP_STORED (no compression) or ZIP_DEFLATED (requires zlib). |
| allowZip64: if True ZipFile will create files with ZIP64 extensions when |
| needed, otherwise it will raise an exception when this would |
| be necessary. |
| |
| """ |
| |
| fp = None # Set here since __del__ checks it |
| |
| def __init__(self, file, mode="r", compression=ZIP_STORED, allowZip64=False): |
| """Open the ZIP file with mode read "r", write "w" or append "a".""" |
| if mode not in ("r", "w", "a"): |
| raise RuntimeError('ZipFile() requires mode "r", "w", or "a"') |
| |
| if compression == ZIP_STORED: |
| pass |
| elif compression == ZIP_DEFLATED: |
| if not zlib: |
| raise RuntimeError,\ |
| "Compression requires the (missing) zlib module" |
| else: |
| raise RuntimeError, "That compression method is not supported" |
| |
| self._allowZip64 = allowZip64 |
| self._didModify = False |
| self.debug = 0 # Level of printing: 0 through 3 |
| self.NameToInfo = {} # Find file info given name |
| self.filelist = [] # List of ZipInfo instances for archive |
| self.compression = compression # Method of compression |
| self.mode = key = mode.replace('b', '')[0] |
| self.pwd = None |
| self.comment = '' |
| |
| # Check if we were passed a file-like object |
| if isinstance(file, basestring): |
| self._filePassed = 0 |
| self.filename = file |
| modeDict = {'r' : 'rb', 'w': 'wb', 'a' : 'r+b'} |
| try: |
| self.fp = open(file, modeDict[mode]) |
| except IOError: |
| if mode == 'a': |
| mode = key = 'w' |
| self.fp = open(file, modeDict[mode]) |
| else: |
| raise |
| else: |
| self._filePassed = 1 |
| self.fp = file |
| self.filename = getattr(file, 'name', None) |
| |
| if key == 'r': |
| self._GetContents() |
| elif key == 'w': |
| pass |
| elif key == 'a': |
| try: # See if file is a zip file |
| self._RealGetContents() |
| # seek to start of directory and overwrite |
| self.fp.seek(self.start_dir, 0) |
| except BadZipfile: # file is not a zip file, just append |
| self.fp.seek(0, 2) |
| else: |
| if not self._filePassed: |
| self.fp.close() |
| self.fp = None |
| raise RuntimeError, 'Mode must be "r", "w" or "a"' |
| |
| def _GetContents(self): |
| """Read the directory, making sure we close the file if the format |
| is bad.""" |
| try: |
| self._RealGetContents() |
| except BadZipfile: |
| if not self._filePassed: |
| self.fp.close() |
| self.fp = None |
| raise |
| |
| def _RealGetContents(self): |
| """Read in the table of contents for the ZIP file.""" |
| fp = self.fp |
| endrec = _EndRecData(fp) |
| if not endrec: |
| raise BadZipfile, "File is not a zip file" |
| if self.debug > 1: |
| print endrec |
| size_cd = endrec[_ECD_SIZE] # bytes in central directory |
| offset_cd = endrec[_ECD_OFFSET] # offset of central directory |
| self.comment = endrec[_ECD_COMMENT] # archive comment |
| |
| # "concat" is zero, unless zip was concatenated to another file |
| concat = endrec[_ECD_LOCATION] - size_cd - offset_cd |
| if endrec[_ECD_SIGNATURE] == stringEndArchive64: |
| # If Zip64 extension structures are present, account for them |
| concat -= (sizeEndCentDir64 + sizeEndCentDir64Locator) |
| |
| if self.debug > 2: |
| inferred = concat + offset_cd |
| print "given, inferred, offset", offset_cd, inferred, concat |
| # self.start_dir: Position of start of central directory |
| self.start_dir = offset_cd + concat |
| fp.seek(self.start_dir, 0) |
| data = fp.read(size_cd) |
| fp = cStringIO.StringIO(data) |
| total = 0 |
| while total < size_cd: |
| centdir = fp.read(sizeCentralDir) |
| if centdir[0:4] != stringCentralDir: |
| raise BadZipfile, "Bad magic number for central directory" |
| centdir = struct.unpack(structCentralDir, centdir) |
| if self.debug > 2: |
| print centdir |
| filename = fp.read(centdir[_CD_FILENAME_LENGTH]) |
| # Create ZipInfo instance to store file information |
| x = ZipInfo(filename) |
| x.extra = fp.read(centdir[_CD_EXTRA_FIELD_LENGTH]) |
| x.comment = fp.read(centdir[_CD_COMMENT_LENGTH]) |
| x.header_offset = centdir[_CD_LOCAL_HEADER_OFFSET] |
| (x.create_version, x.create_system, x.extract_version, x.reserved, |
| x.flag_bits, x.compress_type, t, d, |
| x.CRC, x.compress_size, x.file_size) = centdir[1:12] |
| x.volume, x.internal_attr, x.external_attr = centdir[15:18] |
| # Convert date/time code to (year, month, day, hour, min, sec) |
| x._raw_time = t |
| x.date_time = ( (d>>9)+1980, (d>>5)&0xF, d&0x1F, |
| t>>11, (t>>5)&0x3F, (t&0x1F) * 2 ) |
| |
| x._decodeExtra() |
| x.header_offset = x.header_offset + concat |
| x.filename = x._decodeFilename() |
| self.filelist.append(x) |
| self.NameToInfo[x.filename] = x |
| |
| # update total bytes read from central directory |
| total = (total + sizeCentralDir + centdir[_CD_FILENAME_LENGTH] |
| + centdir[_CD_EXTRA_FIELD_LENGTH] |
| + centdir[_CD_COMMENT_LENGTH]) |
| |
| if self.debug > 2: |
| print "total", total |
| |
| |
| def namelist(self): |
| """Return a list of file names in the archive.""" |
| l = [] |
| for data in self.filelist: |
| l.append(data.filename) |
| return l |
| |
| def infolist(self): |
| """Return a list of class ZipInfo instances for files in the |
| archive.""" |
| return self.filelist |
| |
| def printdir(self): |
| """Print a table of contents for the zip file.""" |
| print "%-46s %19s %12s" % ("File Name", "Modified ", "Size") |
| for zinfo in self.filelist: |
| date = "%d-%02d-%02d %02d:%02d:%02d" % zinfo.date_time[:6] |
| print "%-46s %s %12d" % (zinfo.filename, date, zinfo.file_size) |
| |
| def testzip(self): |
| """Read all the files and check the CRC.""" |
| chunk_size = 2 ** 20 |
| for zinfo in self.filelist: |
| try: |
| # Read by chunks, to avoid an OverflowError or a |
| # MemoryError with very large embedded files. |
| f = self.open(zinfo.filename, "r") |
| while f.read(chunk_size): # Check CRC-32 |
| pass |
| except BadZipfile: |
| return zinfo.filename |
| |
| def getinfo(self, name): |
| """Return the instance of ZipInfo given 'name'.""" |
| info = self.NameToInfo.get(name) |
| if info is None: |
| raise KeyError( |
| 'There is no item named %r in the archive' % name) |
| |
| return info |
| |
| def setpassword(self, pwd): |
| """Set default password for encrypted files.""" |
| self.pwd = pwd |
| |
| def read(self, name, pwd=None): |
| """Return file bytes (as a string) for name.""" |
| return self.open(name, "r", pwd).read() |
| |
| def open(self, name, mode="r", pwd=None): |
| """Return file-like object for 'name'.""" |
| if mode not in ("r", "U", "rU"): |
| raise RuntimeError, 'open() requires mode "r", "U", or "rU"' |
| if not self.fp: |
| raise RuntimeError, \ |
| "Attempt to read ZIP archive that was already closed" |
| |
| # Only open a new file for instances where we were not |
| # given a file object in the constructor |
| if self._filePassed: |
| zef_file = self.fp |
| else: |
| zef_file = open(self.filename, 'rb') |
| |
| # Make sure we have an info object |
| if isinstance(name, ZipInfo): |
| # 'name' is already an info object |
| zinfo = name |
| else: |
| # Get info object for name |
| zinfo = self.getinfo(name) |
| |
| zef_file.seek(zinfo.header_offset, 0) |
| |
| # Skip the file header: |
| fheader = zef_file.read(sizeFileHeader) |
| if fheader[0:4] != stringFileHeader: |
| raise BadZipfile, "Bad magic number for file header" |
| |
| fheader = struct.unpack(structFileHeader, fheader) |
| fname = zef_file.read(fheader[_FH_FILENAME_LENGTH]) |
| if fheader[_FH_EXTRA_FIELD_LENGTH]: |
| zef_file.read(fheader[_FH_EXTRA_FIELD_LENGTH]) |
| |
| if fname != zinfo.orig_filename: |
| raise BadZipfile, \ |
| 'File name in directory "%s" and header "%s" differ.' % ( |
| zinfo.orig_filename, fname) |
| |
| # check for encrypted flag & handle password |
| is_encrypted = zinfo.flag_bits & 0x1 |
| zd = None |
| if is_encrypted: |
| if not pwd: |
| pwd = self.pwd |
| if not pwd: |
| raise RuntimeError, "File %s is encrypted, " \ |
| "password required for extraction" % name |
| |
| zd = _ZipDecrypter(pwd) |
| # The first 12 bytes in the cypher stream is an encryption header |
| # used to strengthen the algorithm. The first 11 bytes are |
| # completely random, while the 12th contains the MSB of the CRC, |
| # or the MSB of the file time depending on the header type |
| # and is used to check the correctness of the password. |
| bytes = zef_file.read(12) |
| h = map(zd, bytes[0:12]) |
| if zinfo.flag_bits & 0x8: |
| # compare against the file type from extended local headers |
| check_byte = (zinfo._raw_time >> 8) & 0xff |
| else: |
| # compare against the CRC otherwise |
| check_byte = (zinfo.CRC >> 24) & 0xff |
| if ord(h[11]) != check_byte: |
| raise RuntimeError("Bad password for file", name) |
| |
| # build and return a ZipExtFile |
| if zd is None: |
| zef = ZipExtFile(zef_file, zinfo) |
| else: |
| zef = ZipExtFile(zef_file, zinfo, zd) |
| |
| # set universal newlines on ZipExtFile if necessary |
| if "U" in mode: |
| zef.set_univ_newlines(True) |
| return zef |
| |
| def extract(self, member, path=None, pwd=None): |
| """Extract a member from the archive to the current working directory, |
| using its full name. Its file information is extracted as accurately |
| as possible. `member' may be a filename or a ZipInfo object. You can |
| specify a different directory using `path'. |
| """ |
| if not isinstance(member, ZipInfo): |
| member = self.getinfo(member) |
| |
| if path is None: |
| path = os.getcwd() |
| |
| return self._extract_member(member, path, pwd) |
| |
| def extractall(self, path=None, members=None, pwd=None): |
| """Extract all members from the archive to the current working |
| directory. `path' specifies a different directory to extract to. |
| `members' is optional and must be a subset of the list returned |
| by namelist(). |
| """ |
| if members is None: |
| members = self.namelist() |
| |
| for zipinfo in members: |
| self.extract(zipinfo, path, pwd) |
| |
| def _extract_member(self, member, targetpath, pwd): |
| """Extract the ZipInfo object 'member' to a physical |
| file on the path targetpath. |
| """ |
| # build the destination pathname, replacing |
| # forward slashes to platform specific separators. |
| # Strip trailing path separator, unless it represents the root. |
| if (targetpath[-1:] in (os.path.sep, os.path.altsep) |
| and len(os.path.splitdrive(targetpath)[1]) > 1): |
| targetpath = targetpath[:-1] |
| |
| # don't include leading "/" from file name if present |
| if member.filename[0] == '/': |
| targetpath = os.path.join(targetpath, member.filename[1:]) |
| else: |
| targetpath = os.path.join(targetpath, member.filename) |
| |
| targetpath = os.path.normpath(targetpath) |
| |
| # Create all upper directories if necessary. |
| upperdirs = os.path.dirname(targetpath) |
| if upperdirs and not os.path.exists(upperdirs): |
| os.makedirs(upperdirs) |
| |
| if member.filename[-1] == '/': |
| os.mkdir(targetpath) |
| return targetpath |
| |
| source = self.open(member, pwd=pwd) |
| target = file(targetpath, "wb") |
| shutil.copyfileobj(source, target) |
| source.close() |
| target.close() |
| |
| return targetpath |
| |
| def _writecheck(self, zinfo): |
| """Check for errors before writing a file to the archive.""" |
| if zinfo.filename in self.NameToInfo: |
| if self.debug: # Warning for duplicate names |
| print "Duplicate name:", zinfo.filename |
| if self.mode not in ("w", "a"): |
| raise RuntimeError, 'write() requires mode "w" or "a"' |
| if not self.fp: |
| raise RuntimeError, \ |
| "Attempt to write ZIP archive that was already closed" |
| if zinfo.compress_type == ZIP_DEFLATED and not zlib: |
| raise RuntimeError, \ |
| "Compression requires the (missing) zlib module" |
| if zinfo.compress_type not in (ZIP_STORED, ZIP_DEFLATED): |
| raise RuntimeError, \ |
| "That compression method is not supported" |
| if zinfo.file_size > ZIP64_LIMIT: |
| if not self._allowZip64: |
| raise LargeZipFile("Filesize would require ZIP64 extensions") |
| if zinfo.header_offset > ZIP64_LIMIT: |
| if not self._allowZip64: |
| raise LargeZipFile("Zipfile size would require ZIP64 extensions") |
| |
| def write(self, filename, arcname=None, compress_type=None): |
| """Put the bytes from filename into the archive under the name |
| arcname.""" |
| if not self.fp: |
| raise RuntimeError( |
| "Attempt to write to ZIP archive that was already closed") |
| |
| st = os.stat(filename) |
| isdir = stat.S_ISDIR(st.st_mode) |
| mtime = time.localtime(st.st_mtime) |
| date_time = mtime[0:6] |
| # Create ZipInfo instance to store file information |
| if arcname is None: |
| arcname = filename |
| arcname = os.path.normpath(os.path.splitdrive(arcname)[1]) |
| while arcname[0] in (os.sep, os.altsep): |
| arcname = arcname[1:] |
| if isdir: |
| arcname += '/' |
| zinfo = ZipInfo(arcname, date_time) |
| zinfo.external_attr = (st[0] & 0xFFFF) << 16L # Unix attributes |
| if compress_type is None: |
| zinfo.compress_type = self.compression |
| else: |
| zinfo.compress_type = compress_type |
| |
| zinfo.file_size = st.st_size |
| zinfo.flag_bits = 0x00 |
| zinfo.header_offset = self.fp.tell() # Start of header bytes |
| |
| self._writecheck(zinfo) |
| self._didModify = True |
| |
| if isdir: |
| zinfo.file_size = 0 |
| zinfo.compress_size = 0 |
| zinfo.CRC = 0 |
| self.filelist.append(zinfo) |
| self.NameToInfo[zinfo.filename] = zinfo |
| self.fp.write(zinfo.FileHeader()) |
| return |
| |
| with open(filename, "rb") as fp: |
| # Must overwrite CRC and sizes with correct data later |
| zinfo.CRC = CRC = 0 |
| zinfo.compress_size = compress_size = 0 |
| zinfo.file_size = file_size = 0 |
| self.fp.write(zinfo.FileHeader()) |
| if zinfo.compress_type == ZIP_DEFLATED: |
| cmpr = zlib.compressobj(zlib.Z_DEFAULT_COMPRESSION, |
| zlib.DEFLATED, -15) |
| else: |
| cmpr = None |
| while 1: |
| buf = fp.read(1024 * 8) |
| if not buf: |
| break |
| file_size = file_size + len(buf) |
| CRC = crc32(buf, CRC) & 0xffffffff |
| if cmpr: |
| buf = cmpr.compress(buf) |
| compress_size = compress_size + len(buf) |
| self.fp.write(buf) |
| if cmpr: |
| buf = cmpr.flush() |
| compress_size = compress_size + len(buf) |
| self.fp.write(buf) |
| zinfo.compress_size = compress_size |
| else: |
| zinfo.compress_size = file_size |
| zinfo.CRC = CRC |
| zinfo.file_size = file_size |
| # Seek backwards and write CRC and file sizes |
| position = self.fp.tell() # Preserve current position in file |
| self.fp.seek(zinfo.header_offset + 14, 0) |
| self.fp.write(struct.pack("<LLL", zinfo.CRC, zinfo.compress_size, |
| zinfo.file_size)) |
| self.fp.seek(position, 0) |
| self.filelist.append(zinfo) |
| self.NameToInfo[zinfo.filename] = zinfo |
| |
| def writestr(self, zinfo_or_arcname, bytes): |
| """Write a file into the archive. The contents is the string |
| 'bytes'. 'zinfo_or_arcname' is either a ZipInfo instance or |
| the name of the file in the archive.""" |
| if not isinstance(zinfo_or_arcname, ZipInfo): |
| zinfo = ZipInfo(filename=zinfo_or_arcname, |
| date_time=time.localtime(time.time())[:6]) |
| zinfo.compress_type = self.compression |
| zinfo.external_attr = 0600 << 16 |
| else: |
| zinfo = zinfo_or_arcname |
| |
| if not self.fp: |
| raise RuntimeError( |
| "Attempt to write to ZIP archive that was already closed") |
| |
| zinfo.file_size = len(bytes) # Uncompressed size |
| zinfo.header_offset = self.fp.tell() # Start of header bytes |
| self._writecheck(zinfo) |
| self._didModify = True |
| zinfo.CRC = crc32(bytes) & 0xffffffff # CRC-32 checksum |
| if zinfo.compress_type == ZIP_DEFLATED: |
| co = zlib.compressobj(zlib.Z_DEFAULT_COMPRESSION, |
| zlib.DEFLATED, -15) |
| bytes = co.compress(bytes) + co.flush() |
| zinfo.compress_size = len(bytes) # Compressed size |
| else: |
| zinfo.compress_size = zinfo.file_size |
| zinfo.header_offset = self.fp.tell() # Start of header bytes |
| self.fp.write(zinfo.FileHeader()) |
| self.fp.write(bytes) |
| self.fp.flush() |
| if zinfo.flag_bits & 0x08: |
| # Write CRC and file sizes after the file data |
| self.fp.write(struct.pack("<lLL", zinfo.CRC, zinfo.compress_size, |
| zinfo.file_size)) |
| self.filelist.append(zinfo) |
| self.NameToInfo[zinfo.filename] = zinfo |
| |
| def __del__(self): |
| """Call the "close()" method in case the user forgot.""" |
| self.close() |
| |
| def close(self): |
| """Close the file, and for mode "w" and "a" write the ending |
| records.""" |
| if self.fp is None: |
| return |
| |
| if self.mode in ("w", "a") and self._didModify: # write ending records |
| count = 0 |
| pos1 = self.fp.tell() |
| for zinfo in self.filelist: # write central directory |
| count = count + 1 |
| dt = zinfo.date_time |
| dosdate = (dt[0] - 1980) << 9 | dt[1] << 5 | dt[2] |
| dostime = dt[3] << 11 | dt[4] << 5 | (dt[5] // 2) |
| extra = [] |
| if zinfo.file_size > ZIP64_LIMIT \ |
| or zinfo.compress_size > ZIP64_LIMIT: |
| extra.append(zinfo.file_size) |
| extra.append(zinfo.compress_size) |
| file_size = 0xffffffff |
| compress_size = 0xffffffff |
| else: |
| file_size = zinfo.file_size |
| compress_size = zinfo.compress_size |
| |
| if zinfo.header_offset > ZIP64_LIMIT: |
| extra.append(zinfo.header_offset) |
| header_offset = 0xffffffffL |
| else: |
| header_offset = zinfo.header_offset |
| |
| extra_data = zinfo.extra |
| if extra: |
| # Append a ZIP64 field to the extra's |
| extra_data = struct.pack( |
| '<HH' + 'Q'*len(extra), |
| 1, 8*len(extra), *extra) + extra_data |
| |
| extract_version = max(45, zinfo.extract_version) |
| create_version = max(45, zinfo.create_version) |
| else: |
| extract_version = zinfo.extract_version |
| create_version = zinfo.create_version |
| |
| try: |
| filename, flag_bits = zinfo._encodeFilenameFlags() |
| centdir = struct.pack(structCentralDir, |
| stringCentralDir, create_version, |
| zinfo.create_system, extract_version, zinfo.reserved, |
| flag_bits, zinfo.compress_type, dostime, dosdate, |
| zinfo.CRC, compress_size, file_size, |
| len(filename), len(extra_data), len(zinfo.comment), |
| 0, zinfo.internal_attr, zinfo.external_attr, |
| header_offset) |
| except DeprecationWarning: |
| print >>sys.stderr, (structCentralDir, |
| stringCentralDir, create_version, |
| zinfo.create_system, extract_version, zinfo.reserved, |
| zinfo.flag_bits, zinfo.compress_type, dostime, dosdate, |
| zinfo.CRC, compress_size, file_size, |
| len(zinfo.filename), len(extra_data), len(zinfo.comment), |
| 0, zinfo.internal_attr, zinfo.external_attr, |
| header_offset) |
| raise |
| self.fp.write(centdir) |
| self.fp.write(filename) |
| self.fp.write(extra_data) |
| self.fp.write(zinfo.comment) |
| |
| pos2 = self.fp.tell() |
| # Write end-of-zip-archive record |
| centDirCount = count |
| centDirSize = pos2 - pos1 |
| centDirOffset = pos1 |
| if (centDirCount >= ZIP_FILECOUNT_LIMIT or |
| centDirOffset > ZIP64_LIMIT or |
| centDirSize > ZIP64_LIMIT): |
| # Need to write the ZIP64 end-of-archive records |
| zip64endrec = struct.pack( |
| structEndArchive64, stringEndArchive64, |
| 44, 45, 45, 0, 0, centDirCount, centDirCount, |
| centDirSize, centDirOffset) |
| self.fp.write(zip64endrec) |
| |
| zip64locrec = struct.pack( |
| structEndArchive64Locator, |
| stringEndArchive64Locator, 0, pos2, 1) |
| self.fp.write(zip64locrec) |
| centDirCount = min(centDirCount, 0xFFFF) |
| centDirSize = min(centDirSize, 0xFFFFFFFF) |
| centDirOffset = min(centDirOffset, 0xFFFFFFFF) |
| |
| # check for valid comment length |
| if len(self.comment) >= ZIP_MAX_COMMENT: |
| if self.debug > 0: |
| msg = 'Archive comment is too long; truncating to %d bytes' \ |
| % ZIP_MAX_COMMENT |
| self.comment = self.comment[:ZIP_MAX_COMMENT] |
| |
| endrec = struct.pack(structEndArchive, stringEndArchive, |
| 0, 0, centDirCount, centDirCount, |
| centDirSize, centDirOffset, len(self.comment)) |
| self.fp.write(endrec) |
| self.fp.write(self.comment) |
| self.fp.flush() |
| |
| if not self._filePassed: |
| self.fp.close() |
| self.fp = None |
| |
| |
| class PyZipFile(ZipFile): |
| """Class to create ZIP archives with Python library files and packages.""" |
| |
| def writepy(self, pathname, basename = ""): |
| """Add all files from "pathname" to the ZIP archive. |
| |
| If pathname is a package directory, search the directory and |
| all package subdirectories recursively for all *.py and enter |
| the modules into the archive. If pathname is a plain |
| directory, listdir *.py and enter all modules. Else, pathname |
| must be a Python *.py file and the module will be put into the |
| archive. Added modules are always module.pyo or module.pyc. |
| This method will compile the module.py into module.pyc if |
| necessary. |
| """ |
| dir, name = os.path.split(pathname) |
| if os.path.isdir(pathname): |
| initname = os.path.join(pathname, "__init__.py") |
| if os.path.isfile(initname): |
| # This is a package directory, add it |
| if basename: |
| basename = "%s/%s" % (basename, name) |
| else: |
| basename = name |
| if self.debug: |
| print "Adding package in", pathname, "as", basename |
| fname, arcname = self._get_codename(initname[0:-3], basename) |
| if self.debug: |
| print "Adding", arcname |
| self.write(fname, arcname) |
| dirlist = os.listdir(pathname) |
| dirlist.remove("__init__.py") |
| # Add all *.py files and package subdirectories |
| for filename in dirlist: |
| path = os.path.join(pathname, filename) |
| root, ext = os.path.splitext(filename) |
| if os.path.isdir(path): |
| if os.path.isfile(os.path.join(path, "__init__.py")): |
| # This is a package directory, add it |
| self.writepy(path, basename) # Recursive call |
| elif ext == ".py": |
| fname, arcname = self._get_codename(path[0:-3], |
| basename) |
| if self.debug: |
| print "Adding", arcname |
| self.write(fname, arcname) |
| else: |
| # This is NOT a package directory, add its files at top level |
| if self.debug: |
| print "Adding files from directory", pathname |
| for filename in os.listdir(pathname): |
| path = os.path.join(pathname, filename) |
| root, ext = os.path.splitext(filename) |
| if ext == ".py": |
| fname, arcname = self._get_codename(path[0:-3], |
| basename) |
| if self.debug: |
| print "Adding", arcname |
| self.write(fname, arcname) |
| else: |
| if pathname[-3:] != ".py": |
| raise RuntimeError, \ |
| 'Files added with writepy() must end with ".py"' |
| fname, arcname = self._get_codename(pathname[0:-3], basename) |
| if self.debug: |
| print "Adding file", arcname |
| self.write(fname, arcname) |
| |
| def _get_codename(self, pathname, basename): |
| """Return (filename, archivename) for the path. |
| |
| Given a module name path, return the correct file path and |
| archive name, compiling if necessary. For example, given |
| /python/lib/string, return (/python/lib/string.pyc, string). |
| """ |
| file_py = pathname + ".py" |
| file_pyc = pathname + ".pyc" |
| file_pyo = pathname + ".pyo" |
| if os.path.isfile(file_pyo) and \ |
| os.stat(file_pyo).st_mtime >= os.stat(file_py).st_mtime: |
| fname = file_pyo # Use .pyo file |
| elif not os.path.isfile(file_pyc) or \ |
| os.stat(file_pyc).st_mtime < os.stat(file_py).st_mtime: |
| import py_compile |
| if self.debug: |
| print "Compiling", file_py |
| try: |
| py_compile.compile(file_py, file_pyc, None, True) |
| except py_compile.PyCompileError,err: |
| print err.msg |
| fname = file_pyc |
| else: |
| fname = file_pyc |
| archivename = os.path.split(fname)[1] |
| if basename: |
| archivename = "%s/%s" % (basename, archivename) |
| return (fname, archivename) |
| |
| |
| def main(args = None): |
| import textwrap |
| USAGE=textwrap.dedent("""\ |
| Usage: |
| zipfile.py -l zipfile.zip # Show listing of a zipfile |
| zipfile.py -t zipfile.zip # Test if a zipfile is valid |
| zipfile.py -e zipfile.zip target # Extract zipfile into target dir |
| zipfile.py -c zipfile.zip src ... # Create zipfile from sources |
| """) |
| if args is None: |
| args = sys.argv[1:] |
| |
| if not args or args[0] not in ('-l', '-c', '-e', '-t'): |
| print USAGE |
| sys.exit(1) |
| |
| if args[0] == '-l': |
| if len(args) != 2: |
| print USAGE |
| sys.exit(1) |
| zf = ZipFile(args[1], 'r') |
| zf.printdir() |
| zf.close() |
| |
| elif args[0] == '-t': |
| if len(args) != 2: |
| print USAGE |
| sys.exit(1) |
| zf = ZipFile(args[1], 'r') |
| zf.testzip() |
| print "Done testing" |
| |
| elif args[0] == '-e': |
| if len(args) != 3: |
| print USAGE |
| sys.exit(1) |
| |
| zf = ZipFile(args[1], 'r') |
| out = args[2] |
| for path in zf.namelist(): |
| if path.startswith('./'): |
| tgt = os.path.join(out, path[2:]) |
| else: |
| tgt = os.path.join(out, path) |
| |
| tgtdir = os.path.dirname(tgt) |
| if not os.path.exists(tgtdir): |
| os.makedirs(tgtdir) |
| with open(tgt, 'wb') as fp: |
| fp.write(zf.read(path)) |
| zf.close() |
| |
| elif args[0] == '-c': |
| if len(args) < 3: |
| print USAGE |
| sys.exit(1) |
| |
| def addToZip(zf, path, zippath): |
| if os.path.isfile(path): |
| zf.write(path, zippath, ZIP_DEFLATED) |
| elif os.path.isdir(path): |
| for nm in os.listdir(path): |
| addToZip(zf, |
| os.path.join(path, nm), os.path.join(zippath, nm)) |
| # else: ignore |
| |
| zf = ZipFile(args[1], 'w', allowZip64=True) |
| for src in args[2:]: |
| addToZip(zf, src, os.path.basename(src)) |
| |
| zf.close() |
| |
| if __name__ == "__main__": |
| main() |