| """distutils.util |
| |
| General-purpose utility functions used throughout the Distutils |
| (especially in command classes). Mostly filesystem manipulation, but |
| not limited to that. The functions in this module generally raise |
| DistutilsFileError when they have problems with the filesystem, because |
| os.error in pre-1.5.2 Python only gives the error message and not the |
| file causing it.""" |
| |
| # created 1999/03/08, Greg Ward |
| |
| __rcsid__ = "$Id$" |
| |
| import os, string |
| from distutils.errors import * |
| |
| |
| # cache for by mkpath() -- in addition to cheapening redundant calls, |
| # eliminates redundant "creating /foo/bar/baz" messages in dry-run mode |
| PATH_CREATED = {} |
| |
| # I don't use os.makedirs because a) it's new to Python 1.5.2, and |
| # b) it blows up if the directory already exists (I want to silently |
| # succeed in that case). |
| def mkpath (name, mode=0777, verbose=0, dry_run=0): |
| """Create a directory and any missing ancestor directories. If the |
| directory already exists, return silently. Raise |
| DistutilsFileError if unable to create some directory along the |
| way (eg. some sub-path exists, but is a file rather than a |
| directory). If 'verbose' is true, print a one-line summary of |
| each mkdir to stdout.""" |
| |
| global PATH_CREATED |
| |
| # XXX what's the better way to handle verbosity? print as we create |
| # each directory in the path (the current behaviour), or only announce |
| # the creation of the whole path? (quite easy to do the latter since |
| # we're not using a recursive algorithm) |
| |
| name = os.path.normpath (name) |
| |
| if os.path.isdir (name): |
| return |
| if PATH_CREATED.get (name): |
| return |
| |
| (head, tail) = os.path.split (name) |
| tails = [tail] # stack of lone dirs to create |
| |
| while head and tail and not os.path.isdir (head): |
| #print "splitting '%s': " % head, |
| (head, tail) = os.path.split (head) |
| #print "to ('%s','%s')" % (head, tail) |
| tails.insert (0, tail) # push next higher dir onto stack |
| |
| #print "stack of tails:", tails |
| |
| # now 'head' contains the deepest directory that already exists |
| # (that is, the child of 'head' in 'name' is the highest directory |
| # that does *not* exist) |
| for d in tails: |
| #print "head = %s, d = %s: " % (head, d), |
| head = os.path.join (head, d) |
| if PATH_CREATED.get (head): |
| continue |
| |
| if verbose: |
| print "creating", head |
| |
| if not dry_run: |
| try: |
| os.mkdir (head) |
| except os.error, (errno, errstr): |
| raise DistutilsFileError, "%s: %s" % (head, errstr) |
| |
| PATH_CREATED[head] = 1 |
| |
| # mkpath () |
| |
| |
| def newer (source, target): |
| """Return true if 'source' exists and is more recently modified than |
| 'target', or if 'source' exists and 'target' doesn't. Return |
| false if both exist and 'target' is the same age or younger than |
| 'source'. Raise DistutilsFileError if 'source' does not |
| exist.""" |
| |
| if not os.path.exists (source): |
| raise DistutilsFileError, "file '%s' does not exist" % source |
| if not os.path.exists (target): |
| return 1 |
| |
| from stat import ST_MTIME |
| mtime1 = os.stat(source)[ST_MTIME] |
| mtime2 = os.stat(target)[ST_MTIME] |
| |
| return mtime1 > mtime2 |
| |
| # newer () |
| |
| |
| def newer_pairwise (sources, targets): |
| """Walk two filename lists in parallel, testing if each 'target' is |
| up-to-date relative to its corresponding 'source'. If so, both |
| are deleted from their respective lists. Return a list of tuples |
| containing the deleted (source,target) pairs.""" |
| |
| if len (sources) != len (targets): |
| raise ValueError, "'sources' and 'targets' must be same length" |
| |
| goners = [] |
| for i in range (len (sources)-1, -1, -1): |
| if not newer (sources[i], targets[i]): |
| goners.append ((sources[i], targets[i])) |
| del sources[i] |
| del targets[i] |
| goners.reverse() |
| return goners |
| |
| # newer_pairwise () |
| |
| |
| def newer_group (sources, target, missing='error'): |
| """Return true if 'target' is out-of-date with respect to any |
| file listed in 'sources'. In other words, if 'target' exists and |
| is newer than every file in 'sources', return false; otherwise |
| return true. 'missing' controls what we do when a source file is |
| missing; the default ("error") is to blow up with an OSError from |
| inside 'stat()'; if it is "ignore", we silently drop any missing |
| source files; if it is "newer", any missing source files make us |
| assume that 'target' is out-of-date (this is handy in "dry-run" |
| mode: it'll make you pretend to carry out commands that wouldn't |
| work because inputs are missing, but that doesn't matter because |
| you're not actually going to run the commands).""" |
| |
| # If the target doesn't even exist, then it's definitely out-of-date. |
| if not os.path.exists (target): |
| return 1 |
| |
| # Otherwise we have to find out the hard way: if *any* source file |
| # is more recent than 'target', then 'target' is out-of-date and |
| # we can immediately return true. If we fall through to the end |
| # of the loop, then 'target' is up-to-date and we return false. |
| from stat import ST_MTIME |
| target_mtime = os.stat (target)[ST_MTIME] |
| for source in sources: |
| if not os.path.exists (source): |
| if missing == 'error': # blow up when we stat() the file |
| pass |
| elif missing == 'ignore': # missing source dropped from |
| continue # target's dependency list |
| elif missing == 'newer': # missing source means target is |
| return 1 # out-of-date |
| |
| source_mtime = os.stat(source)[ST_MTIME] |
| if source_mtime > target_mtime: |
| return 1 |
| else: |
| return 0 |
| |
| # newer_group () |
| |
| |
| # XXX this isn't used anywhere, and worse, it has the same name as a method |
| # in Command with subtly different semantics. (This one just has one |
| # source -> one dest; that one has many sources -> one dest.) Nuke it? |
| def make_file (src, dst, func, args, |
| verbose=0, update_message=None, noupdate_message=None): |
| """Makes 'dst' from 'src' (both filenames) by calling 'func' with |
| 'args', but only if it needs to: i.e. if 'dst' does not exist or |
| 'src' is newer than 'dst'.""" |
| |
| if newer (src, dst): |
| if verbose and update_message: |
| print update_message |
| apply (func, args) |
| else: |
| if verbose and noupdate_message: |
| print noupdate_message |
| |
| # make_file () |
| |
| |
| def _copy_file_contents (src, dst, buffer_size=16*1024): |
| """Copy the file 'src' to 'dst'; both must be filenames. Any error |
| opening either file, reading from 'src', or writing to 'dst', |
| raises DistutilsFileError. Data is read/written in chunks of |
| 'buffer_size' bytes (default 16k). No attempt is made to handle |
| anything apart from regular files.""" |
| |
| # Stolen from shutil module in the standard library, but with |
| # custom error-handling added. |
| |
| fsrc = None |
| fdst = None |
| try: |
| try: |
| fsrc = open(src, 'rb') |
| except os.error, (errno, errstr): |
| raise DistutilsFileError, "could not open %s: %s" % (src, errstr) |
| |
| try: |
| fdst = open(dst, 'wb') |
| except os.error, (errno, errstr): |
| raise DistutilsFileError, "could not create %s: %s" % (dst, errstr) |
| |
| while 1: |
| try: |
| buf = fsrc.read (buffer_size) |
| except os.error, (errno, errstr): |
| raise DistutilsFileError, \ |
| "could not read from %s: %s" % (src, errstr) |
| |
| if not buf: |
| break |
| |
| try: |
| fdst.write(buf) |
| except os.error, (errno, errstr): |
| raise DistutilsFileError, \ |
| "could not write to %s: %s" % (dst, errstr) |
| |
| finally: |
| if fdst: |
| fdst.close() |
| if fsrc: |
| fsrc.close() |
| |
| # _copy_file_contents() |
| |
| |
| def copy_file (src, dst, |
| preserve_mode=1, |
| preserve_times=1, |
| update=0, |
| verbose=0, |
| dry_run=0): |
| |
| """Copy a file 'src' to 'dst'. If 'dst' is a directory, then 'src' |
| is copied there with the same name; otherwise, it must be a |
| filename. (If the file exists, it will be ruthlessly clobbered.) |
| If 'preserve_mode' is true (the default), the file's mode (type |
| and permission bits, or whatever is analogous on the current |
| platform) is copied. If 'preserve_times' is true (the default), |
| the last-modified and last-access times are copied as well. If |
| 'update' is true, 'src' will only be copied if 'dst' does not |
| exist, or if 'dst' does exist but is older than 'src'. If |
| 'verbose' is true, then a one-line summary of the copy will be |
| printed to stdout. |
| |
| Return true if the file was copied (or would have been copied), |
| false otherwise (ie. 'update' was true and the destination is |
| up-to-date).""" |
| |
| # XXX doesn't copy Mac-specific metadata |
| |
| from stat import * |
| |
| if not os.path.isfile (src): |
| raise DistutilsFileError, \ |
| "can't copy %s: not a regular file" % src |
| |
| if os.path.isdir (dst): |
| dir = dst |
| dst = os.path.join (dst, os.path.basename (src)) |
| else: |
| dir = os.path.dirname (dst) |
| |
| if update and not newer (src, dst): |
| if verbose: |
| print "not copying %s (output up-to-date)" % src |
| return 0 |
| |
| if verbose: |
| print "copying %s -> %s" % (src, dir) |
| |
| if dry_run: |
| return 1 |
| |
| _copy_file_contents (src, dst) |
| if preserve_mode or preserve_times: |
| st = os.stat (src) |
| |
| # According to David Ascher <da@ski.org>, utime() should be done |
| # before chmod() (at least under NT). |
| if preserve_times: |
| os.utime (dst, (st[ST_ATIME], st[ST_MTIME])) |
| if preserve_mode: |
| os.chmod (dst, S_IMODE (st[ST_MODE])) |
| |
| return 1 |
| |
| # copy_file () |
| |
| |
| def copy_tree (src, dst, |
| preserve_mode=1, |
| preserve_times=1, |
| preserve_symlinks=0, |
| update=0, |
| verbose=0, |
| dry_run=0): |
| |
| |
| """Copy an entire directory tree 'src' to a new location 'dst'. Both |
| 'src' and 'dst' must be directory names. If 'src' is not a |
| directory, raise DistutilsFileError. If 'dst' does not exist, it |
| is created with 'mkpath()'. The end result of the copy is that |
| every file in 'src' is copied to 'dst', and directories under |
| 'src' are recursively copied to 'dst'. Return the list of files |
| copied (under their output names) -- note that if 'update' is true, |
| this might be less than the list of files considered. Return |
| value is not affected by 'dry_run'. |
| |
| 'preserve_mode' and 'preserve_times' are the same as for |
| 'copy_file'; note that they only apply to regular files, not to |
| directories. If 'preserve_symlinks' is true, symlinks will be |
| copied as symlinks (on platforms that support them!); otherwise |
| (the default), the destination of the symlink will be copied. |
| 'update' and 'verbose' are the same as for 'copy_file'.""" |
| |
| if not dry_run and not os.path.isdir (src): |
| raise DistutilsFileError, \ |
| "cannot copy tree %s: not a directory" % src |
| try: |
| names = os.listdir (src) |
| except os.error, (errno, errstr): |
| if dry_run: |
| names = [] |
| else: |
| raise DistutilsFileError, \ |
| "error listing files in %s: %s" % (src, errstr) |
| |
| if not dry_run: |
| mkpath (dst, verbose=verbose) |
| |
| outputs = [] |
| |
| for n in names: |
| src_name = os.path.join (src, n) |
| dst_name = os.path.join (dst, n) |
| |
| if preserve_symlinks and os.path.islink (src_name): |
| link_dest = os.readlink (src_name) |
| if verbose: |
| print "linking %s -> %s" % (dst_name, link_dest) |
| if not dry_run: |
| os.symlink (link_dest, dst_name) |
| outputs.append (dst_name) |
| |
| elif os.path.isdir (src_name): |
| outputs.extend ( |
| copy_tree (src_name, dst_name, |
| preserve_mode, preserve_times, preserve_symlinks, |
| update, verbose, dry_run)) |
| else: |
| if (copy_file (src_name, dst_name, |
| preserve_mode, preserve_times, |
| update, verbose, dry_run)): |
| outputs.append (dst_name) |
| |
| return outputs |
| |
| # copy_tree () |
| |
| |
| # XXX I suspect this is Unix-specific -- need porting help! |
| def move_file (src, dst, |
| verbose=0, |
| dry_run=0): |
| |
| """Move a file 'src' to 'dst'. If 'dst' is a directory, the file |
| will be moved into it with the same name; otherwise, 'src' is |
| just renamed to 'dst'. Return the new full name of the file. |
| |
| Handles cross-device moves on Unix using |
| 'copy_file()'. What about other systems???""" |
| |
| from os.path import exists, isfile, isdir, basename, dirname |
| |
| if verbose: |
| print "moving %s -> %s" % (src, dst) |
| |
| if dry_run: |
| return dst |
| |
| if not isfile (src): |
| raise DistutilsFileError, \ |
| "can't move '%s': not a regular file" % src |
| |
| if isdir (dst): |
| dst = os.path.join (dst, basename (src)) |
| elif exists (dst): |
| raise DistutilsFileError, \ |
| "can't move '%s': destination '%s' already exists" % \ |
| (src, dst) |
| |
| if not isdir (dirname (dst)): |
| raise DistutilsFileError, \ |
| "can't move '%s': destination '%s' not a valid path" % \ |
| (src, dst) |
| |
| copy_it = 0 |
| try: |
| os.rename (src, dst) |
| except os.error, (num, msg): |
| if num == errno.EXDEV: |
| copy_it = 1 |
| else: |
| raise DistutilsFileError, \ |
| "couldn't move '%s' to '%s': %s" % (src, dst, msg) |
| |
| if copy_it: |
| copy_file (src, dst) |
| try: |
| os.unlink (src) |
| except os.error, (num, msg): |
| try: |
| os.unlink (dst) |
| except os.error: |
| pass |
| raise DistutilsFileError, \ |
| ("couldn't move '%s' to '%s' by copy/delete: " + |
| "delete '%s' failed: %s") % \ |
| (src, dst, src, msg) |
| |
| return dst |
| |
| # move_file () |
| |
| |
| def write_file (filename, contents): |
| """Create a file with the specified name and write 'contents' (a |
| sequence of strings without line terminators) to it.""" |
| |
| f = open (filename, "w") |
| for line in contents: |
| f.write (line + "\n") |
| f.close () |
| |
| |
| def get_platform (): |
| """Return a string (suitable for tacking onto directory names) that |
| identifies the current platform. Under Unix, identifies both the OS |
| and hardware architecture, e.g. "linux-i586", "solaris-sparc", |
| "irix-mips". For Windows and Mac OS, just returns 'sys.platform' -- |
| i.e. "???" or "???".""" |
| |
| if os.name == 'posix': |
| uname = os.uname() |
| OS = uname[0] |
| arch = uname[4] |
| return "%s-%s" % (string.lower (OS), string.lower (arch)) |
| else: |
| return sys.platform |
| |
| # get_platform() |