| r"""HTTP/1.1 client library |
| |
| <intro stuff goes here> |
| <other stuff, too> |
| |
| HTTPConnection goes through a number of "states", which define when a client |
| may legally make another request or fetch the response for a particular |
| request. This diagram details these state transitions: |
| |
| (null) |
| | |
| | HTTPConnection() |
| v |
| Idle |
| | |
| | putrequest() |
| v |
| Request-started |
| | |
| | ( putheader() )* endheaders() |
| v |
| Request-sent |
| | |
| | response = getresponse() |
| v |
| Unread-response [Response-headers-read] |
| |\____________________ |
| | | |
| | response.read() | putrequest() |
| v v |
| Idle Req-started-unread-response |
| ______/| |
| / | |
| response.read() | | ( putheader() )* endheaders() |
| v v |
| Request-started Req-sent-unread-response |
| | |
| | response.read() |
| v |
| Request-sent |
| |
| This diagram presents the following rules: |
| -- a second request may not be started until {response-headers-read} |
| -- a response [object] cannot be retrieved until {request-sent} |
| -- there is no differentiation between an unread response body and a |
| partially read response body |
| |
| Note: this enforcement is applied by the HTTPConnection class. The |
| HTTPResponse class does not enforce this state machine, which |
| implies sophisticated clients may accelerate the request/response |
| pipeline. Caution should be taken, though: accelerating the states |
| beyond the above pattern may imply knowledge of the server's |
| connection-close behavior for certain requests. For example, it |
| is impossible to tell whether the server will close the connection |
| UNTIL the response headers have been read; this means that further |
| requests cannot be placed into the pipeline until it is known that |
| the server will NOT be closing the connection. |
| |
| Logical State __state __response |
| ------------- ------- ---------- |
| Idle _CS_IDLE None |
| Request-started _CS_REQ_STARTED None |
| Request-sent _CS_REQ_SENT None |
| Unread-response _CS_IDLE <response_class> |
| Req-started-unread-response _CS_REQ_STARTED <response_class> |
| Req-sent-unread-response _CS_REQ_SENT <response_class> |
| """ |
| |
| from array import array |
| import os |
| import re |
| import socket |
| from sys import py3kwarning |
| from urlparse import urlsplit |
| import warnings |
| with warnings.catch_warnings(): |
| if py3kwarning: |
| warnings.filterwarnings("ignore", ".*mimetools has been removed", |
| DeprecationWarning) |
| import mimetools |
| |
| try: |
| from cStringIO import StringIO |
| except ImportError: |
| from StringIO import StringIO |
| |
| __all__ = ["HTTP", "HTTPResponse", "HTTPConnection", |
| "HTTPException", "NotConnected", "UnknownProtocol", |
| "UnknownTransferEncoding", "UnimplementedFileMode", |
| "IncompleteRead", "InvalidURL", "ImproperConnectionState", |
| "CannotSendRequest", "CannotSendHeader", "ResponseNotReady", |
| "BadStatusLine", "error", "responses"] |
| |
| HTTP_PORT = 80 |
| HTTPS_PORT = 443 |
| |
| _UNKNOWN = 'UNKNOWN' |
| |
| # connection states |
| _CS_IDLE = 'Idle' |
| _CS_REQ_STARTED = 'Request-started' |
| _CS_REQ_SENT = 'Request-sent' |
| |
| # status codes |
| # informational |
| CONTINUE = 100 |
| SWITCHING_PROTOCOLS = 101 |
| PROCESSING = 102 |
| |
| # successful |
| OK = 200 |
| CREATED = 201 |
| ACCEPTED = 202 |
| NON_AUTHORITATIVE_INFORMATION = 203 |
| NO_CONTENT = 204 |
| RESET_CONTENT = 205 |
| PARTIAL_CONTENT = 206 |
| MULTI_STATUS = 207 |
| IM_USED = 226 |
| |
| # redirection |
| MULTIPLE_CHOICES = 300 |
| MOVED_PERMANENTLY = 301 |
| FOUND = 302 |
| SEE_OTHER = 303 |
| NOT_MODIFIED = 304 |
| USE_PROXY = 305 |
| TEMPORARY_REDIRECT = 307 |
| |
| # client error |
| BAD_REQUEST = 400 |
| UNAUTHORIZED = 401 |
| PAYMENT_REQUIRED = 402 |
| FORBIDDEN = 403 |
| NOT_FOUND = 404 |
| METHOD_NOT_ALLOWED = 405 |
| NOT_ACCEPTABLE = 406 |
| PROXY_AUTHENTICATION_REQUIRED = 407 |
| REQUEST_TIMEOUT = 408 |
| CONFLICT = 409 |
| GONE = 410 |
| LENGTH_REQUIRED = 411 |
| PRECONDITION_FAILED = 412 |
| REQUEST_ENTITY_TOO_LARGE = 413 |
| REQUEST_URI_TOO_LONG = 414 |
| UNSUPPORTED_MEDIA_TYPE = 415 |
| REQUESTED_RANGE_NOT_SATISFIABLE = 416 |
| EXPECTATION_FAILED = 417 |
| UNPROCESSABLE_ENTITY = 422 |
| LOCKED = 423 |
| FAILED_DEPENDENCY = 424 |
| UPGRADE_REQUIRED = 426 |
| |
| # server error |
| INTERNAL_SERVER_ERROR = 500 |
| NOT_IMPLEMENTED = 501 |
| BAD_GATEWAY = 502 |
| SERVICE_UNAVAILABLE = 503 |
| GATEWAY_TIMEOUT = 504 |
| HTTP_VERSION_NOT_SUPPORTED = 505 |
| INSUFFICIENT_STORAGE = 507 |
| NOT_EXTENDED = 510 |
| |
| # Mapping status codes to official W3C names |
| responses = { |
| 100: 'Continue', |
| 101: 'Switching Protocols', |
| |
| 200: 'OK', |
| 201: 'Created', |
| 202: 'Accepted', |
| 203: 'Non-Authoritative Information', |
| 204: 'No Content', |
| 205: 'Reset Content', |
| 206: 'Partial Content', |
| |
| 300: 'Multiple Choices', |
| 301: 'Moved Permanently', |
| 302: 'Found', |
| 303: 'See Other', |
| 304: 'Not Modified', |
| 305: 'Use Proxy', |
| 306: '(Unused)', |
| 307: 'Temporary Redirect', |
| |
| 400: 'Bad Request', |
| 401: 'Unauthorized', |
| 402: 'Payment Required', |
| 403: 'Forbidden', |
| 404: 'Not Found', |
| 405: 'Method Not Allowed', |
| 406: 'Not Acceptable', |
| 407: 'Proxy Authentication Required', |
| 408: 'Request Timeout', |
| 409: 'Conflict', |
| 410: 'Gone', |
| 411: 'Length Required', |
| 412: 'Precondition Failed', |
| 413: 'Request Entity Too Large', |
| 414: 'Request-URI Too Long', |
| 415: 'Unsupported Media Type', |
| 416: 'Requested Range Not Satisfiable', |
| 417: 'Expectation Failed', |
| |
| 500: 'Internal Server Error', |
| 501: 'Not Implemented', |
| 502: 'Bad Gateway', |
| 503: 'Service Unavailable', |
| 504: 'Gateway Timeout', |
| 505: 'HTTP Version Not Supported', |
| } |
| |
| # maximal amount of data to read at one time in _safe_read |
| MAXAMOUNT = 1048576 |
| |
| # maximal line length when calling readline(). |
| _MAXLINE = 65536 |
| |
| # maximum amount of headers accepted |
| _MAXHEADERS = 100 |
| |
| # Header name/value ABNF (http://tools.ietf.org/html/rfc7230#section-3.2) |
| # |
| # VCHAR = %x21-7E |
| # obs-text = %x80-FF |
| # header-field = field-name ":" OWS field-value OWS |
| # field-name = token |
| # field-value = *( field-content / obs-fold ) |
| # field-content = field-vchar [ 1*( SP / HTAB ) field-vchar ] |
| # field-vchar = VCHAR / obs-text |
| # |
| # obs-fold = CRLF 1*( SP / HTAB ) |
| # ; obsolete line folding |
| # ; see Section 3.2.4 |
| |
| # token = 1*tchar |
| # |
| # tchar = "!" / "#" / "$" / "%" / "&" / "'" / "*" |
| # / "+" / "-" / "." / "^" / "_" / "`" / "|" / "~" |
| # / DIGIT / ALPHA |
| # ; any VCHAR, except delimiters |
| # |
| # VCHAR defined in http://tools.ietf.org/html/rfc5234#appendix-B.1 |
| |
| # the patterns for both name and value are more leniant than RFC |
| # definitions to allow for backwards compatibility |
| _is_legal_header_name = re.compile(r'\A[^:\s][^:\r\n]*\Z').match |
| _is_illegal_header_value = re.compile(r'\n(?![ \t])|\r(?![ \t\n])').search |
| |
| # We always set the Content-Length header for these methods because some |
| # servers will otherwise respond with a 411 |
| _METHODS_EXPECTING_BODY = {'PATCH', 'POST', 'PUT'} |
| |
| |
| class HTTPMessage(mimetools.Message): |
| |
| def addheader(self, key, value): |
| """Add header for field key handling repeats.""" |
| prev = self.dict.get(key) |
| if prev is None: |
| self.dict[key] = value |
| else: |
| combined = ", ".join((prev, value)) |
| self.dict[key] = combined |
| |
| def addcontinue(self, key, more): |
| """Add more field data from a continuation line.""" |
| prev = self.dict[key] |
| self.dict[key] = prev + "\n " + more |
| |
| def readheaders(self): |
| """Read header lines. |
| |
| Read header lines up to the entirely blank line that terminates them. |
| The (normally blank) line that ends the headers is skipped, but not |
| included in the returned list. If a non-header line ends the headers, |
| (which is an error), an attempt is made to backspace over it; it is |
| never included in the returned list. |
| |
| The variable self.status is set to the empty string if all went well, |
| otherwise it is an error message. The variable self.headers is a |
| completely uninterpreted list of lines contained in the header (so |
| printing them will reproduce the header exactly as it appears in the |
| file). |
| |
| If multiple header fields with the same name occur, they are combined |
| according to the rules in RFC 2616 sec 4.2: |
| |
| Appending each subsequent field-value to the first, each separated |
| by a comma. The order in which header fields with the same field-name |
| are received is significant to the interpretation of the combined |
| field value. |
| """ |
| # XXX The implementation overrides the readheaders() method of |
| # rfc822.Message. The base class design isn't amenable to |
| # customized behavior here so the method here is a copy of the |
| # base class code with a few small changes. |
| |
| self.dict = {} |
| self.unixfrom = '' |
| self.headers = hlist = [] |
| self.status = '' |
| headerseen = "" |
| firstline = 1 |
| startofline = unread = tell = None |
| if hasattr(self.fp, 'unread'): |
| unread = self.fp.unread |
| elif self.seekable: |
| tell = self.fp.tell |
| while True: |
| if len(hlist) > _MAXHEADERS: |
| raise HTTPException("got more than %d headers" % _MAXHEADERS) |
| if tell: |
| try: |
| startofline = tell() |
| except IOError: |
| startofline = tell = None |
| self.seekable = 0 |
| line = self.fp.readline(_MAXLINE + 1) |
| if len(line) > _MAXLINE: |
| raise LineTooLong("header line") |
| if not line: |
| self.status = 'EOF in headers' |
| break |
| # Skip unix From name time lines |
| if firstline and line.startswith('From '): |
| self.unixfrom = self.unixfrom + line |
| continue |
| firstline = 0 |
| if headerseen and line[0] in ' \t': |
| # XXX Not sure if continuation lines are handled properly |
| # for http and/or for repeating headers |
| # It's a continuation line. |
| hlist.append(line) |
| self.addcontinue(headerseen, line.strip()) |
| continue |
| elif self.iscomment(line): |
| # It's a comment. Ignore it. |
| continue |
| elif self.islast(line): |
| # Note! No pushback here! The delimiter line gets eaten. |
| break |
| headerseen = self.isheader(line) |
| if headerseen: |
| # It's a legal header line, save it. |
| hlist.append(line) |
| self.addheader(headerseen, line[len(headerseen)+1:].strip()) |
| continue |
| elif headerseen is not None: |
| # An empty header name. These aren't allowed in HTTP, but it's |
| # probably a benign mistake. Don't add the header, just keep |
| # going. |
| continue |
| else: |
| # It's not a header line; throw it back and stop here. |
| if not self.dict: |
| self.status = 'No headers' |
| else: |
| self.status = 'Non-header line where header expected' |
| # Try to undo the read. |
| if unread: |
| unread(line) |
| elif tell: |
| self.fp.seek(startofline) |
| else: |
| self.status = self.status + '; bad seek' |
| break |
| |
| class HTTPResponse: |
| |
| # strict: If true, raise BadStatusLine if the status line can't be |
| # parsed as a valid HTTP/1.0 or 1.1 status line. By default it is |
| # false because it prevents clients from talking to HTTP/0.9 |
| # servers. Note that a response with a sufficiently corrupted |
| # status line will look like an HTTP/0.9 response. |
| |
| # See RFC 2616 sec 19.6 and RFC 1945 sec 6 for details. |
| |
| def __init__(self, sock, debuglevel=0, strict=0, method=None, buffering=False): |
| if buffering: |
| # The caller won't be using any sock.recv() calls, so buffering |
| # is fine and recommended for performance. |
| self.fp = sock.makefile('rb') |
| else: |
| # The buffer size is specified as zero, because the headers of |
| # the response are read with readline(). If the reads were |
| # buffered the readline() calls could consume some of the |
| # response, which make be read via a recv() on the underlying |
| # socket. |
| self.fp = sock.makefile('rb', 0) |
| self.debuglevel = debuglevel |
| self.strict = strict |
| self._method = method |
| |
| self.msg = None |
| |
| # from the Status-Line of the response |
| self.version = _UNKNOWN # HTTP-Version |
| self.status = _UNKNOWN # Status-Code |
| self.reason = _UNKNOWN # Reason-Phrase |
| |
| self.chunked = _UNKNOWN # is "chunked" being used? |
| self.chunk_left = _UNKNOWN # bytes left to read in current chunk |
| self.length = _UNKNOWN # number of bytes left in response |
| self.will_close = _UNKNOWN # conn will close at end of response |
| |
| def _read_status(self): |
| # Initialize with Simple-Response defaults |
| line = self.fp.readline(_MAXLINE + 1) |
| if len(line) > _MAXLINE: |
| raise LineTooLong("header line") |
| if self.debuglevel > 0: |
| print "reply:", repr(line) |
| if not line: |
| # Presumably, the server closed the connection before |
| # sending a valid response. |
| raise BadStatusLine(line) |
| try: |
| [version, status, reason] = line.split(None, 2) |
| except ValueError: |
| try: |
| [version, status] = line.split(None, 1) |
| reason = "" |
| except ValueError: |
| # empty version will cause next test to fail and status |
| # will be treated as 0.9 response. |
| version = "" |
| if not version.startswith('HTTP/'): |
| if self.strict: |
| self.close() |
| raise BadStatusLine(line) |
| else: |
| # assume it's a Simple-Response from an 0.9 server |
| self.fp = LineAndFileWrapper(line, self.fp) |
| return "HTTP/0.9", 200, "" |
| |
| # The status code is a three-digit number |
| try: |
| status = int(status) |
| if status < 100 or status > 999: |
| raise BadStatusLine(line) |
| except ValueError: |
| raise BadStatusLine(line) |
| return version, status, reason |
| |
| def begin(self): |
| if self.msg is not None: |
| # we've already started reading the response |
| return |
| |
| # read until we get a non-100 response |
| while True: |
| version, status, reason = self._read_status() |
| if status != CONTINUE: |
| break |
| # skip the header from the 100 response |
| while True: |
| skip = self.fp.readline(_MAXLINE + 1) |
| if len(skip) > _MAXLINE: |
| raise LineTooLong("header line") |
| skip = skip.strip() |
| if not skip: |
| break |
| if self.debuglevel > 0: |
| print "header:", skip |
| |
| self.status = status |
| self.reason = reason.strip() |
| if version == 'HTTP/1.0': |
| self.version = 10 |
| elif version.startswith('HTTP/1.'): |
| self.version = 11 # use HTTP/1.1 code for HTTP/1.x where x>=1 |
| elif version == 'HTTP/0.9': |
| self.version = 9 |
| else: |
| raise UnknownProtocol(version) |
| |
| if self.version == 9: |
| self.length = None |
| self.chunked = 0 |
| self.will_close = 1 |
| self.msg = HTTPMessage(StringIO()) |
| return |
| |
| self.msg = HTTPMessage(self.fp, 0) |
| if self.debuglevel > 0: |
| for hdr in self.msg.headers: |
| print "header:", hdr, |
| |
| # don't let the msg keep an fp |
| self.msg.fp = None |
| |
| # are we using the chunked-style of transfer encoding? |
| tr_enc = self.msg.getheader('transfer-encoding') |
| if tr_enc and tr_enc.lower() == "chunked": |
| self.chunked = 1 |
| self.chunk_left = None |
| else: |
| self.chunked = 0 |
| |
| # will the connection close at the end of the response? |
| self.will_close = self._check_close() |
| |
| # do we have a Content-Length? |
| # NOTE: RFC 2616, S4.4, #3 says we ignore this if tr_enc is "chunked" |
| length = self.msg.getheader('content-length') |
| if length and not self.chunked: |
| try: |
| self.length = int(length) |
| except ValueError: |
| self.length = None |
| else: |
| if self.length < 0: # ignore nonsensical negative lengths |
| self.length = None |
| else: |
| self.length = None |
| |
| # does the body have a fixed length? (of zero) |
| if (status == NO_CONTENT or status == NOT_MODIFIED or |
| 100 <= status < 200 or # 1xx codes |
| self._method == 'HEAD'): |
| self.length = 0 |
| |
| # if the connection remains open, and we aren't using chunked, and |
| # a content-length was not provided, then assume that the connection |
| # WILL close. |
| if not self.will_close and \ |
| not self.chunked and \ |
| self.length is None: |
| self.will_close = 1 |
| |
| def _check_close(self): |
| conn = self.msg.getheader('connection') |
| if self.version == 11: |
| # An HTTP/1.1 proxy is assumed to stay open unless |
| # explicitly closed. |
| conn = self.msg.getheader('connection') |
| if conn and "close" in conn.lower(): |
| return True |
| return False |
| |
| # Some HTTP/1.0 implementations have support for persistent |
| # connections, using rules different than HTTP/1.1. |
| |
| # For older HTTP, Keep-Alive indicates persistent connection. |
| if self.msg.getheader('keep-alive'): |
| return False |
| |
| # At least Akamai returns a "Connection: Keep-Alive" header, |
| # which was supposed to be sent by the client. |
| if conn and "keep-alive" in conn.lower(): |
| return False |
| |
| # Proxy-Connection is a netscape hack. |
| pconn = self.msg.getheader('proxy-connection') |
| if pconn and "keep-alive" in pconn.lower(): |
| return False |
| |
| # otherwise, assume it will close |
| return True |
| |
| def close(self): |
| fp = self.fp |
| if fp: |
| self.fp = None |
| fp.close() |
| |
| def isclosed(self): |
| # NOTE: it is possible that we will not ever call self.close(). This |
| # case occurs when will_close is TRUE, length is None, and we |
| # read up to the last byte, but NOT past it. |
| # |
| # IMPLIES: if will_close is FALSE, then self.close() will ALWAYS be |
| # called, meaning self.isclosed() is meaningful. |
| return self.fp is None |
| |
| # XXX It would be nice to have readline and __iter__ for this, too. |
| |
| def read(self, amt=None): |
| if self.fp is None: |
| return '' |
| |
| if self._method == 'HEAD': |
| self.close() |
| return '' |
| |
| if self.chunked: |
| return self._read_chunked(amt) |
| |
| if amt is None: |
| # unbounded read |
| if self.length is None: |
| s = self.fp.read() |
| else: |
| try: |
| s = self._safe_read(self.length) |
| except IncompleteRead: |
| self.close() |
| raise |
| self.length = 0 |
| self.close() # we read everything |
| return s |
| |
| if self.length is not None: |
| if amt > self.length: |
| # clip the read to the "end of response" |
| amt = self.length |
| |
| # we do not use _safe_read() here because this may be a .will_close |
| # connection, and the user is reading more bytes than will be provided |
| # (for example, reading in 1k chunks) |
| s = self.fp.read(amt) |
| if not s and amt: |
| # Ideally, we would raise IncompleteRead if the content-length |
| # wasn't satisfied, but it might break compatibility. |
| self.close() |
| if self.length is not None: |
| self.length -= len(s) |
| if not self.length: |
| self.close() |
| |
| return s |
| |
| def _read_chunked(self, amt): |
| assert self.chunked != _UNKNOWN |
| chunk_left = self.chunk_left |
| value = [] |
| while True: |
| if chunk_left is None: |
| line = self.fp.readline(_MAXLINE + 1) |
| if len(line) > _MAXLINE: |
| raise LineTooLong("chunk size") |
| i = line.find(';') |
| if i >= 0: |
| line = line[:i] # strip chunk-extensions |
| try: |
| chunk_left = int(line, 16) |
| except ValueError: |
| # close the connection as protocol synchronisation is |
| # probably lost |
| self.close() |
| raise IncompleteRead(''.join(value)) |
| if chunk_left == 0: |
| break |
| if amt is None: |
| value.append(self._safe_read(chunk_left)) |
| elif amt < chunk_left: |
| value.append(self._safe_read(amt)) |
| self.chunk_left = chunk_left - amt |
| return ''.join(value) |
| elif amt == chunk_left: |
| value.append(self._safe_read(amt)) |
| self._safe_read(2) # toss the CRLF at the end of the chunk |
| self.chunk_left = None |
| return ''.join(value) |
| else: |
| value.append(self._safe_read(chunk_left)) |
| amt -= chunk_left |
| |
| # we read the whole chunk, get another |
| self._safe_read(2) # toss the CRLF at the end of the chunk |
| chunk_left = None |
| |
| # read and discard trailer up to the CRLF terminator |
| ### note: we shouldn't have any trailers! |
| while True: |
| line = self.fp.readline(_MAXLINE + 1) |
| if len(line) > _MAXLINE: |
| raise LineTooLong("trailer line") |
| if not line: |
| # a vanishingly small number of sites EOF without |
| # sending the trailer |
| break |
| if line == '\r\n': |
| break |
| |
| # we read everything; close the "file" |
| self.close() |
| |
| return ''.join(value) |
| |
| def _safe_read(self, amt): |
| """Read the number of bytes requested, compensating for partial reads. |
| |
| Normally, we have a blocking socket, but a read() can be interrupted |
| by a signal (resulting in a partial read). |
| |
| Note that we cannot distinguish between EOF and an interrupt when zero |
| bytes have been read. IncompleteRead() will be raised in this |
| situation. |
| |
| This function should be used when <amt> bytes "should" be present for |
| reading. If the bytes are truly not available (due to EOF), then the |
| IncompleteRead exception can be used to detect the problem. |
| """ |
| # NOTE(gps): As of svn r74426 socket._fileobject.read(x) will never |
| # return less than x bytes unless EOF is encountered. It now handles |
| # signal interruptions (socket.error EINTR) internally. This code |
| # never caught that exception anyways. It seems largely pointless. |
| # self.fp.read(amt) will work fine. |
| s = [] |
| while amt > 0: |
| chunk = self.fp.read(min(amt, MAXAMOUNT)) |
| if not chunk: |
| raise IncompleteRead(''.join(s), amt) |
| s.append(chunk) |
| amt -= len(chunk) |
| return ''.join(s) |
| |
| def fileno(self): |
| return self.fp.fileno() |
| |
| def getheader(self, name, default=None): |
| if self.msg is None: |
| raise ResponseNotReady() |
| return self.msg.getheader(name, default) |
| |
| def getheaders(self): |
| """Return list of (header, value) tuples.""" |
| if self.msg is None: |
| raise ResponseNotReady() |
| return self.msg.items() |
| |
| |
| class HTTPConnection: |
| |
| _http_vsn = 11 |
| _http_vsn_str = 'HTTP/1.1' |
| |
| response_class = HTTPResponse |
| default_port = HTTP_PORT |
| auto_open = 1 |
| debuglevel = 0 |
| strict = 0 |
| |
| def __init__(self, host, port=None, strict=None, |
| timeout=socket._GLOBAL_DEFAULT_TIMEOUT, source_address=None): |
| self.timeout = timeout |
| self.source_address = source_address |
| self.sock = None |
| self._buffer = [] |
| self.__response = None |
| self.__state = _CS_IDLE |
| self._method = None |
| self._tunnel_host = None |
| self._tunnel_port = None |
| self._tunnel_headers = {} |
| if strict is not None: |
| self.strict = strict |
| |
| (self.host, self.port) = self._get_hostport(host, port) |
| |
| # This is stored as an instance variable to allow unittests |
| # to replace with a suitable mock |
| self._create_connection = socket.create_connection |
| |
| def set_tunnel(self, host, port=None, headers=None): |
| """ Set up host and port for HTTP CONNECT tunnelling. |
| |
| In a connection that uses HTTP Connect tunneling, the host passed to the |
| constructor is used as proxy server that relays all communication to the |
| endpoint passed to set_tunnel. This is done by sending a HTTP CONNECT |
| request to the proxy server when the connection is established. |
| |
| This method must be called before the HTTP connection has been |
| established. |
| |
| The headers argument should be a mapping of extra HTTP headers |
| to send with the CONNECT request. |
| """ |
| # Verify if this is required. |
| if self.sock: |
| raise RuntimeError("Can't setup tunnel for established connection.") |
| |
| self._tunnel_host, self._tunnel_port = self._get_hostport(host, port) |
| if headers: |
| self._tunnel_headers = headers |
| else: |
| self._tunnel_headers.clear() |
| |
| def _get_hostport(self, host, port): |
| if port is None: |
| i = host.rfind(':') |
| j = host.rfind(']') # ipv6 addresses have [...] |
| if i > j: |
| try: |
| port = int(host[i+1:]) |
| except ValueError: |
| if host[i+1:] == "": # http://foo.com:/ == http://foo.com/ |
| port = self.default_port |
| else: |
| raise InvalidURL("nonnumeric port: '%s'" % host[i+1:]) |
| host = host[:i] |
| else: |
| port = self.default_port |
| if host and host[0] == '[' and host[-1] == ']': |
| host = host[1:-1] |
| return (host, port) |
| |
| def set_debuglevel(self, level): |
| self.debuglevel = level |
| |
| def _tunnel(self): |
| self.send("CONNECT %s:%d HTTP/1.0\r\n" % (self._tunnel_host, |
| self._tunnel_port)) |
| for header, value in self._tunnel_headers.iteritems(): |
| self.send("%s: %s\r\n" % (header, value)) |
| self.send("\r\n") |
| response = self.response_class(self.sock, strict = self.strict, |
| method = self._method) |
| (version, code, message) = response._read_status() |
| |
| if version == "HTTP/0.9": |
| # HTTP/0.9 doesn't support the CONNECT verb, so if httplib has |
| # concluded HTTP/0.9 is being used something has gone wrong. |
| self.close() |
| raise socket.error("Invalid response from tunnel request") |
| if code != 200: |
| self.close() |
| raise socket.error("Tunnel connection failed: %d %s" % (code, |
| message.strip())) |
| while True: |
| line = response.fp.readline(_MAXLINE + 1) |
| if len(line) > _MAXLINE: |
| raise LineTooLong("header line") |
| if not line: |
| # for sites which EOF without sending trailer |
| break |
| if line == '\r\n': |
| break |
| |
| |
| def connect(self): |
| """Connect to the host and port specified in __init__.""" |
| self.sock = self._create_connection((self.host,self.port), |
| self.timeout, self.source_address) |
| |
| if self._tunnel_host: |
| self._tunnel() |
| |
| def close(self): |
| """Close the connection to the HTTP server.""" |
| self.__state = _CS_IDLE |
| try: |
| sock = self.sock |
| if sock: |
| self.sock = None |
| sock.close() # close it manually... there may be other refs |
| finally: |
| response = self.__response |
| if response: |
| self.__response = None |
| response.close() |
| |
| def send(self, data): |
| """Send `data' to the server.""" |
| if self.sock is None: |
| if self.auto_open: |
| self.connect() |
| else: |
| raise NotConnected() |
| |
| if self.debuglevel > 0: |
| print "send:", repr(data) |
| blocksize = 8192 |
| if hasattr(data,'read') and not isinstance(data, array): |
| if self.debuglevel > 0: print "sendIng a read()able" |
| datablock = data.read(blocksize) |
| while datablock: |
| self.sock.sendall(datablock) |
| datablock = data.read(blocksize) |
| else: |
| self.sock.sendall(data) |
| |
| def _output(self, s): |
| """Add a line of output to the current request buffer. |
| |
| Assumes that the line does *not* end with \\r\\n. |
| """ |
| self._buffer.append(s) |
| |
| def _send_output(self, message_body=None): |
| """Send the currently buffered request and clear the buffer. |
| |
| Appends an extra \\r\\n to the buffer. |
| A message_body may be specified, to be appended to the request. |
| """ |
| self._buffer.extend(("", "")) |
| msg = "\r\n".join(self._buffer) |
| del self._buffer[:] |
| # If msg and message_body are sent in a single send() call, |
| # it will avoid performance problems caused by the interaction |
| # between delayed ack and the Nagle algorithm. |
| if isinstance(message_body, str): |
| msg += message_body |
| message_body = None |
| self.send(msg) |
| if message_body is not None: |
| #message_body was not a string (i.e. it is a file) and |
| #we must run the risk of Nagle |
| self.send(message_body) |
| |
| def putrequest(self, method, url, skip_host=0, skip_accept_encoding=0): |
| """Send a request to the server. |
| |
| `method' specifies an HTTP request method, e.g. 'GET'. |
| `url' specifies the object being requested, e.g. '/index.html'. |
| `skip_host' if True does not add automatically a 'Host:' header |
| `skip_accept_encoding' if True does not add automatically an |
| 'Accept-Encoding:' header |
| """ |
| |
| # if a prior response has been completed, then forget about it. |
| if self.__response and self.__response.isclosed(): |
| self.__response = None |
| |
| |
| # in certain cases, we cannot issue another request on this connection. |
| # this occurs when: |
| # 1) we are in the process of sending a request. (_CS_REQ_STARTED) |
| # 2) a response to a previous request has signalled that it is going |
| # to close the connection upon completion. |
| # 3) the headers for the previous response have not been read, thus |
| # we cannot determine whether point (2) is true. (_CS_REQ_SENT) |
| # |
| # if there is no prior response, then we can request at will. |
| # |
| # if point (2) is true, then we will have passed the socket to the |
| # response (effectively meaning, "there is no prior response"), and |
| # will open a new one when a new request is made. |
| # |
| # Note: if a prior response exists, then we *can* start a new request. |
| # We are not allowed to begin fetching the response to this new |
| # request, however, until that prior response is complete. |
| # |
| if self.__state == _CS_IDLE: |
| self.__state = _CS_REQ_STARTED |
| else: |
| raise CannotSendRequest() |
| |
| # Save the method we use, we need it later in the response phase |
| self._method = method |
| if not url: |
| url = '/' |
| hdr = '%s %s %s' % (method, url, self._http_vsn_str) |
| |
| self._output(hdr) |
| |
| if self._http_vsn == 11: |
| # Issue some standard headers for better HTTP/1.1 compliance |
| |
| if not skip_host: |
| # this header is issued *only* for HTTP/1.1 |
| # connections. more specifically, this means it is |
| # only issued when the client uses the new |
| # HTTPConnection() class. backwards-compat clients |
| # will be using HTTP/1.0 and those clients may be |
| # issuing this header themselves. we should NOT issue |
| # it twice; some web servers (such as Apache) barf |
| # when they see two Host: headers |
| |
| # If we need a non-standard port,include it in the |
| # header. If the request is going through a proxy, |
| # but the host of the actual URL, not the host of the |
| # proxy. |
| |
| netloc = '' |
| if url.startswith('http'): |
| nil, netloc, nil, nil, nil = urlsplit(url) |
| |
| if netloc: |
| try: |
| netloc_enc = netloc.encode("ascii") |
| except UnicodeEncodeError: |
| netloc_enc = netloc.encode("idna") |
| self.putheader('Host', netloc_enc) |
| else: |
| if self._tunnel_host: |
| host = self._tunnel_host |
| port = self._tunnel_port |
| else: |
| host = self.host |
| port = self.port |
| |
| try: |
| host_enc = host.encode("ascii") |
| except UnicodeEncodeError: |
| host_enc = host.encode("idna") |
| # Wrap the IPv6 Host Header with [] (RFC 2732) |
| if host_enc.find(':') >= 0: |
| host_enc = "[" + host_enc + "]" |
| if port == self.default_port: |
| self.putheader('Host', host_enc) |
| else: |
| self.putheader('Host', "%s:%s" % (host_enc, port)) |
| |
| # note: we are assuming that clients will not attempt to set these |
| # headers since *this* library must deal with the |
| # consequences. this also means that when the supporting |
| # libraries are updated to recognize other forms, then this |
| # code should be changed (removed or updated). |
| |
| # we only want a Content-Encoding of "identity" since we don't |
| # support encodings such as x-gzip or x-deflate. |
| if not skip_accept_encoding: |
| self.putheader('Accept-Encoding', 'identity') |
| |
| # we can accept "chunked" Transfer-Encodings, but no others |
| # NOTE: no TE header implies *only* "chunked" |
| #self.putheader('TE', 'chunked') |
| |
| # if TE is supplied in the header, then it must appear in a |
| # Connection header. |
| #self.putheader('Connection', 'TE') |
| |
| else: |
| # For HTTP/1.0, the server will assume "not chunked" |
| pass |
| |
| def putheader(self, header, *values): |
| """Send a request header line to the server. |
| |
| For example: h.putheader('Accept', 'text/html') |
| """ |
| if self.__state != _CS_REQ_STARTED: |
| raise CannotSendHeader() |
| |
| header = '%s' % header |
| if not _is_legal_header_name(header): |
| raise ValueError('Invalid header name %r' % (header,)) |
| |
| values = [str(v) for v in values] |
| for one_value in values: |
| if _is_illegal_header_value(one_value): |
| raise ValueError('Invalid header value %r' % (one_value,)) |
| |
| hdr = '%s: %s' % (header, '\r\n\t'.join(values)) |
| self._output(hdr) |
| |
| def endheaders(self, message_body=None): |
| """Indicate that the last header line has been sent to the server. |
| |
| This method sends the request to the server. The optional |
| message_body argument can be used to pass a message body |
| associated with the request. The message body will be sent in |
| the same packet as the message headers if it is string, otherwise it is |
| sent as a separate packet. |
| """ |
| if self.__state == _CS_REQ_STARTED: |
| self.__state = _CS_REQ_SENT |
| else: |
| raise CannotSendHeader() |
| self._send_output(message_body) |
| |
| def request(self, method, url, body=None, headers={}): |
| """Send a complete request to the server.""" |
| self._send_request(method, url, body, headers) |
| |
| def _set_content_length(self, body, method): |
| # Set the content-length based on the body. If the body is "empty", we |
| # set Content-Length: 0 for methods that expect a body (RFC 7230, |
| # Section 3.3.2). If the body is set for other methods, we set the |
| # header provided we can figure out what the length is. |
| thelen = None |
| if body is None and method.upper() in _METHODS_EXPECTING_BODY: |
| thelen = '0' |
| elif body is not None: |
| try: |
| thelen = str(len(body)) |
| except (TypeError, AttributeError): |
| # If this is a file-like object, try to |
| # fstat its file descriptor |
| try: |
| thelen = str(os.fstat(body.fileno()).st_size) |
| except (AttributeError, OSError): |
| # Don't send a length if this failed |
| if self.debuglevel > 0: print "Cannot stat!!" |
| |
| if thelen is not None: |
| self.putheader('Content-Length', thelen) |
| |
| def _send_request(self, method, url, body, headers): |
| # Honor explicitly requested Host: and Accept-Encoding: headers. |
| header_names = dict.fromkeys([k.lower() for k in headers]) |
| skips = {} |
| if 'host' in header_names: |
| skips['skip_host'] = 1 |
| if 'accept-encoding' in header_names: |
| skips['skip_accept_encoding'] = 1 |
| |
| self.putrequest(method, url, **skips) |
| |
| if 'content-length' not in header_names: |
| self._set_content_length(body, method) |
| for hdr, value in headers.iteritems(): |
| self.putheader(hdr, value) |
| self.endheaders(body) |
| |
| def getresponse(self, buffering=False): |
| "Get the response from the server." |
| |
| # if a prior response has been completed, then forget about it. |
| if self.__response and self.__response.isclosed(): |
| self.__response = None |
| |
| # |
| # if a prior response exists, then it must be completed (otherwise, we |
| # cannot read this response's header to determine the connection-close |
| # behavior) |
| # |
| # note: if a prior response existed, but was connection-close, then the |
| # socket and response were made independent of this HTTPConnection |
| # object since a new request requires that we open a whole new |
| # connection |
| # |
| # this means the prior response had one of two states: |
| # 1) will_close: this connection was reset and the prior socket and |
| # response operate independently |
| # 2) persistent: the response was retained and we await its |
| # isclosed() status to become true. |
| # |
| if self.__state != _CS_REQ_SENT or self.__response: |
| raise ResponseNotReady() |
| |
| args = (self.sock,) |
| kwds = {"strict":self.strict, "method":self._method} |
| if self.debuglevel > 0: |
| args += (self.debuglevel,) |
| if buffering: |
| #only add this keyword if non-default, for compatibility with |
| #other response_classes. |
| kwds["buffering"] = True; |
| response = self.response_class(*args, **kwds) |
| |
| try: |
| response.begin() |
| assert response.will_close != _UNKNOWN |
| self.__state = _CS_IDLE |
| |
| if response.will_close: |
| # this effectively passes the connection to the response |
| self.close() |
| else: |
| # remember this, so we can tell when it is complete |
| self.__response = response |
| |
| return response |
| except: |
| response.close() |
| raise |
| |
| |
| class HTTP: |
| "Compatibility class with httplib.py from 1.5." |
| |
| _http_vsn = 10 |
| _http_vsn_str = 'HTTP/1.0' |
| |
| debuglevel = 0 |
| |
| _connection_class = HTTPConnection |
| |
| def __init__(self, host='', port=None, strict=None): |
| "Provide a default host, since the superclass requires one." |
| |
| # some joker passed 0 explicitly, meaning default port |
| if port == 0: |
| port = None |
| |
| # Note that we may pass an empty string as the host; this will raise |
| # an error when we attempt to connect. Presumably, the client code |
| # will call connect before then, with a proper host. |
| self._setup(self._connection_class(host, port, strict)) |
| |
| def _setup(self, conn): |
| self._conn = conn |
| |
| # set up delegation to flesh out interface |
| self.send = conn.send |
| self.putrequest = conn.putrequest |
| self.putheader = conn.putheader |
| self.endheaders = conn.endheaders |
| self.set_debuglevel = conn.set_debuglevel |
| |
| conn._http_vsn = self._http_vsn |
| conn._http_vsn_str = self._http_vsn_str |
| |
| self.file = None |
| |
| def connect(self, host=None, port=None): |
| "Accept arguments to set the host/port, since the superclass doesn't." |
| |
| if host is not None: |
| (self._conn.host, self._conn.port) = self._conn._get_hostport(host, port) |
| self._conn.connect() |
| |
| def getfile(self): |
| "Provide a getfile, since the superclass' does not use this concept." |
| return self.file |
| |
| def getreply(self, buffering=False): |
| """Compat definition since superclass does not define it. |
| |
| Returns a tuple consisting of: |
| - server status code (e.g. '200' if all goes well) |
| - server "reason" corresponding to status code |
| - any RFC822 headers in the response from the server |
| """ |
| try: |
| if not buffering: |
| response = self._conn.getresponse() |
| else: |
| #only add this keyword if non-default for compatibility |
| #with other connection classes |
| response = self._conn.getresponse(buffering) |
| except BadStatusLine, e: |
| ### hmm. if getresponse() ever closes the socket on a bad request, |
| ### then we are going to have problems with self.sock |
| |
| ### should we keep this behavior? do people use it? |
| # keep the socket open (as a file), and return it |
| self.file = self._conn.sock.makefile('rb', 0) |
| |
| # close our socket -- we want to restart after any protocol error |
| self.close() |
| |
| self.headers = None |
| return -1, e.line, None |
| |
| self.headers = response.msg |
| self.file = response.fp |
| return response.status, response.reason, response.msg |
| |
| def close(self): |
| self._conn.close() |
| |
| # note that self.file == response.fp, which gets closed by the |
| # superclass. just clear the object ref here. |
| ### hmm. messy. if status==-1, then self.file is owned by us. |
| ### well... we aren't explicitly closing, but losing this ref will |
| ### do it |
| self.file = None |
| |
| try: |
| import ssl |
| except ImportError: |
| pass |
| else: |
| class HTTPSConnection(HTTPConnection): |
| "This class allows communication via SSL." |
| |
| default_port = HTTPS_PORT |
| |
| def __init__(self, host, port=None, key_file=None, cert_file=None, |
| strict=None, timeout=socket._GLOBAL_DEFAULT_TIMEOUT, |
| source_address=None, context=None): |
| HTTPConnection.__init__(self, host, port, strict, timeout, |
| source_address) |
| self.key_file = key_file |
| self.cert_file = cert_file |
| if context is None: |
| context = ssl._create_default_https_context() |
| if key_file or cert_file: |
| context.load_cert_chain(cert_file, key_file) |
| self._context = context |
| |
| def connect(self): |
| "Connect to a host on a given (SSL) port." |
| |
| HTTPConnection.connect(self) |
| |
| if self._tunnel_host: |
| server_hostname = self._tunnel_host |
| else: |
| server_hostname = self.host |
| |
| self.sock = self._context.wrap_socket(self.sock, |
| server_hostname=server_hostname) |
| |
| __all__.append("HTTPSConnection") |
| |
| class HTTPS(HTTP): |
| """Compatibility with 1.5 httplib interface |
| |
| Python 1.5.2 did not have an HTTPS class, but it defined an |
| interface for sending http requests that is also useful for |
| https. |
| """ |
| |
| _connection_class = HTTPSConnection |
| |
| def __init__(self, host='', port=None, key_file=None, cert_file=None, |
| strict=None, context=None): |
| # provide a default host, pass the X509 cert info |
| |
| # urf. compensate for bad input. |
| if port == 0: |
| port = None |
| self._setup(self._connection_class(host, port, key_file, |
| cert_file, strict, |
| context=context)) |
| |
| # we never actually use these for anything, but we keep them |
| # here for compatibility with post-1.5.2 CVS. |
| self.key_file = key_file |
| self.cert_file = cert_file |
| |
| |
| def FakeSocket (sock, sslobj): |
| warnings.warn("FakeSocket is deprecated, and won't be in 3.x. " + |
| "Use the result of ssl.wrap_socket() directly instead.", |
| DeprecationWarning, stacklevel=2) |
| return sslobj |
| |
| |
| class HTTPException(Exception): |
| # Subclasses that define an __init__ must call Exception.__init__ |
| # or define self.args. Otherwise, str() will fail. |
| pass |
| |
| class NotConnected(HTTPException): |
| pass |
| |
| class InvalidURL(HTTPException): |
| pass |
| |
| class UnknownProtocol(HTTPException): |
| def __init__(self, version): |
| self.args = version, |
| self.version = version |
| |
| class UnknownTransferEncoding(HTTPException): |
| pass |
| |
| class UnimplementedFileMode(HTTPException): |
| pass |
| |
| class IncompleteRead(HTTPException): |
| def __init__(self, partial, expected=None): |
| self.args = partial, |
| self.partial = partial |
| self.expected = expected |
| def __repr__(self): |
| if self.expected is not None: |
| e = ', %i more expected' % self.expected |
| else: |
| e = '' |
| return 'IncompleteRead(%i bytes read%s)' % (len(self.partial), e) |
| def __str__(self): |
| return repr(self) |
| |
| class ImproperConnectionState(HTTPException): |
| pass |
| |
| class CannotSendRequest(ImproperConnectionState): |
| pass |
| |
| class CannotSendHeader(ImproperConnectionState): |
| pass |
| |
| class ResponseNotReady(ImproperConnectionState): |
| pass |
| |
| class BadStatusLine(HTTPException): |
| def __init__(self, line): |
| if not line: |
| line = repr(line) |
| self.args = line, |
| self.line = line |
| |
| class LineTooLong(HTTPException): |
| def __init__(self, line_type): |
| HTTPException.__init__(self, "got more than %d bytes when reading %s" |
| % (_MAXLINE, line_type)) |
| |
| # for backwards compatibility |
| error = HTTPException |
| |
| class LineAndFileWrapper: |
| """A limited file-like object for HTTP/0.9 responses.""" |
| |
| # The status-line parsing code calls readline(), which normally |
| # get the HTTP status line. For a 0.9 response, however, this is |
| # actually the first line of the body! Clients need to get a |
| # readable file object that contains that line. |
| |
| def __init__(self, line, file): |
| self._line = line |
| self._file = file |
| self._line_consumed = 0 |
| self._line_offset = 0 |
| self._line_left = len(line) |
| |
| def __getattr__(self, attr): |
| return getattr(self._file, attr) |
| |
| def _done(self): |
| # called when the last byte is read from the line. After the |
| # call, all read methods are delegated to the underlying file |
| # object. |
| self._line_consumed = 1 |
| self.read = self._file.read |
| self.readline = self._file.readline |
| self.readlines = self._file.readlines |
| |
| def read(self, amt=None): |
| if self._line_consumed: |
| return self._file.read(amt) |
| assert self._line_left |
| if amt is None or amt > self._line_left: |
| s = self._line[self._line_offset:] |
| self._done() |
| if amt is None: |
| return s + self._file.read() |
| else: |
| return s + self._file.read(amt - len(s)) |
| else: |
| assert amt <= self._line_left |
| i = self._line_offset |
| j = i + amt |
| s = self._line[i:j] |
| self._line_offset = j |
| self._line_left -= amt |
| if self._line_left == 0: |
| self._done() |
| return s |
| |
| def readline(self): |
| if self._line_consumed: |
| return self._file.readline() |
| assert self._line_left |
| s = self._line[self._line_offset:] |
| self._done() |
| return s |
| |
| def readlines(self, size=None): |
| if self._line_consumed: |
| return self._file.readlines(size) |
| assert self._line_left |
| L = [self._line[self._line_offset:]] |
| self._done() |
| if size is None: |
| return L + self._file.readlines() |
| else: |
| return L + self._file.readlines(size) |