| /* struct module -- pack values into and (out of) strings */ | 
 |  | 
 | /* New version supporting byte order, alignment and size options, | 
 |    character strings, and unsigned numbers */ | 
 |  | 
 | #define PY_SSIZE_T_CLEAN | 
 |  | 
 | #include "Python.h" | 
 | #include "structseq.h" | 
 | #include "structmember.h" | 
 | #include <ctype.h> | 
 |  | 
 | static PyTypeObject PyStructType; | 
 |  | 
 | /* compatibility macros */ | 
 | #if (PY_VERSION_HEX < 0x02050000) | 
 | typedef int Py_ssize_t; | 
 | #endif | 
 |  | 
 | /* warning messages */ | 
 | #define FLOAT_COERCE_WARN "integer argument expected, got float" | 
 | #define NON_INTEGER_WARN "integer argument expected, got non-integer " \ | 
 |     "(implicit conversion using __int__ is deprecated)" | 
 |  | 
 |  | 
 | /* The translation function for each format character is table driven */ | 
 | typedef struct _formatdef { | 
 |     char format; | 
 |     Py_ssize_t size; | 
 |     Py_ssize_t alignment; | 
 |     PyObject* (*unpack)(const char *, | 
 |                         const struct _formatdef *); | 
 |     int (*pack)(char *, PyObject *, | 
 |                 const struct _formatdef *); | 
 | } formatdef; | 
 |  | 
 | typedef struct _formatcode { | 
 |     const struct _formatdef *fmtdef; | 
 |     Py_ssize_t offset; | 
 |     Py_ssize_t size; | 
 | } formatcode; | 
 |  | 
 | /* Struct object interface */ | 
 |  | 
 | typedef struct { | 
 |     PyObject_HEAD | 
 |     Py_ssize_t s_size; | 
 |     Py_ssize_t s_len; | 
 |     formatcode *s_codes; | 
 |     PyObject *s_format; | 
 |     PyObject *weakreflist; /* List of weak references */ | 
 | } PyStructObject; | 
 |  | 
 |  | 
 | #define PyStruct_Check(op) PyObject_TypeCheck(op, &PyStructType) | 
 | #define PyStruct_CheckExact(op) (Py_TYPE(op) == &PyStructType) | 
 |  | 
 |  | 
 | /* Exception */ | 
 |  | 
 | static PyObject *StructError; | 
 |  | 
 |  | 
 | /* Define various structs to figure out the alignments of types */ | 
 |  | 
 |  | 
 | typedef struct { char c; short x; } st_short; | 
 | typedef struct { char c; int x; } st_int; | 
 | typedef struct { char c; long x; } st_long; | 
 | typedef struct { char c; float x; } st_float; | 
 | typedef struct { char c; double x; } st_double; | 
 | typedef struct { char c; void *x; } st_void_p; | 
 |  | 
 | #define SHORT_ALIGN (sizeof(st_short) - sizeof(short)) | 
 | #define INT_ALIGN (sizeof(st_int) - sizeof(int)) | 
 | #define LONG_ALIGN (sizeof(st_long) - sizeof(long)) | 
 | #define FLOAT_ALIGN (sizeof(st_float) - sizeof(float)) | 
 | #define DOUBLE_ALIGN (sizeof(st_double) - sizeof(double)) | 
 | #define VOID_P_ALIGN (sizeof(st_void_p) - sizeof(void *)) | 
 |  | 
 | /* We can't support q and Q in native mode unless the compiler does; | 
 |    in std mode, they're 8 bytes on all platforms. */ | 
 | #ifdef HAVE_LONG_LONG | 
 | typedef struct { char c; PY_LONG_LONG x; } s_long_long; | 
 | #define LONG_LONG_ALIGN (sizeof(s_long_long) - sizeof(PY_LONG_LONG)) | 
 | #endif | 
 |  | 
 | #ifdef HAVE_C99_BOOL | 
 | #define BOOL_TYPE _Bool | 
 | typedef struct { char c; _Bool x; } s_bool; | 
 | #define BOOL_ALIGN (sizeof(s_bool) - sizeof(BOOL_TYPE)) | 
 | #else | 
 | #define BOOL_TYPE char | 
 | #define BOOL_ALIGN 0 | 
 | #endif | 
 |  | 
 | #define STRINGIFY(x)    #x | 
 |  | 
 | #ifdef __powerc | 
 | #pragma options align=reset | 
 | #endif | 
 |  | 
 | static char *integer_codes = "bBhHiIlLqQ"; | 
 |  | 
 | /* Helper to get a PyLongObject by hook or by crook.  Caller should decref. */ | 
 |  | 
 | static PyObject * | 
 | get_pylong(PyObject *v) | 
 | { | 
 |     PyObject *r, *w; | 
 |     int converted = 0; | 
 |     assert(v != NULL); | 
 |     if (!PyInt_Check(v) && !PyLong_Check(v)) { | 
 |         PyNumberMethods *m; | 
 |         /* Not an integer; first try to use __index__ to | 
 |            convert to an integer.  If the __index__ method | 
 |            doesn't exist, or raises a TypeError, try __int__. | 
 |            Use of the latter is deprecated, and will fail in | 
 |            Python 3.x. */ | 
 |  | 
 |         m = Py_TYPE(v)->tp_as_number; | 
 |         if (PyIndex_Check(v)) { | 
 |             w = PyNumber_Index(v); | 
 |             if (w != NULL) { | 
 |                 v = w; | 
 |                 /* successfully converted to an integer */ | 
 |                 converted = 1; | 
 |             } | 
 |             else if (PyErr_ExceptionMatches(PyExc_TypeError)) { | 
 |                 PyErr_Clear(); | 
 |             } | 
 |             else | 
 |                 return NULL; | 
 |         } | 
 |         if (!converted && m != NULL && m->nb_int != NULL) { | 
 |             /* Special case warning message for floats, for | 
 |                backwards compatibility. */ | 
 |             if (PyFloat_Check(v)) { | 
 |                 if (PyErr_WarnEx( | 
 |                             PyExc_DeprecationWarning, | 
 |                             FLOAT_COERCE_WARN, 1)) | 
 |                     return NULL; | 
 |             } | 
 |             else { | 
 |                 if (PyErr_WarnEx( | 
 |                             PyExc_DeprecationWarning, | 
 |                             NON_INTEGER_WARN, 1)) | 
 |                     return NULL; | 
 |             } | 
 |             v = m->nb_int(v); | 
 |             if (v == NULL) | 
 |                 return NULL; | 
 |             if (!PyInt_Check(v) && !PyLong_Check(v)) { | 
 |                 PyErr_SetString(PyExc_TypeError, | 
 |                                 "__int__ method returned " | 
 |                                 "non-integer"); | 
 |                 return NULL; | 
 |             } | 
 |             converted = 1; | 
 |         } | 
 |         if (!converted) { | 
 |             PyErr_SetString(StructError, | 
 |                             "cannot convert argument " | 
 |                             "to integer"); | 
 |             return NULL; | 
 |         } | 
 |     } | 
 |     else | 
 |         /* Ensure we own a reference to v. */ | 
 |         Py_INCREF(v); | 
 |  | 
 |     assert(PyInt_Check(v) || PyLong_Check(v)); | 
 |     if (PyInt_Check(v)) { | 
 |         r = PyLong_FromLong(PyInt_AS_LONG(v)); | 
 |         Py_DECREF(v); | 
 |     } | 
 |     else if (PyLong_Check(v)) { | 
 |         assert(PyLong_Check(v)); | 
 |         r = v; | 
 |     } | 
 |     else { | 
 |         r = NULL;   /* silence compiler warning about | 
 |                        possibly uninitialized variable */ | 
 |         assert(0);  /* shouldn't ever get here */ | 
 |     } | 
 |  | 
 |     return r; | 
 | } | 
 |  | 
 | /* Helper to convert a Python object to a C long.  Sets an exception | 
 |    (struct.error for an inconvertible type, OverflowError for | 
 |    out-of-range values) and returns -1 on error. */ | 
 |  | 
 | static int | 
 | get_long(PyObject *v, long *p) | 
 | { | 
 |     long x; | 
 |  | 
 |     v = get_pylong(v); | 
 |     if (v == NULL) | 
 |         return -1; | 
 |     assert(PyLong_Check(v)); | 
 |     x = PyLong_AsLong(v); | 
 |     Py_DECREF(v); | 
 |     if (x == (long)-1 && PyErr_Occurred()) | 
 |         return -1; | 
 |     *p = x; | 
 |     return 0; | 
 | } | 
 |  | 
 | /* Same, but handling unsigned long */ | 
 |  | 
 | static int | 
 | get_ulong(PyObject *v, unsigned long *p) | 
 | { | 
 |     unsigned long x; | 
 |  | 
 |     v = get_pylong(v); | 
 |     if (v == NULL) | 
 |         return -1; | 
 |     assert(PyLong_Check(v)); | 
 |     x = PyLong_AsUnsignedLong(v); | 
 |     Py_DECREF(v); | 
 |     if (x == (unsigned long)-1 && PyErr_Occurred()) | 
 |         return -1; | 
 |     *p = x; | 
 |     return 0; | 
 | } | 
 |  | 
 | #ifdef HAVE_LONG_LONG | 
 |  | 
 | /* Same, but handling native long long. */ | 
 |  | 
 | static int | 
 | get_longlong(PyObject *v, PY_LONG_LONG *p) | 
 | { | 
 |     PY_LONG_LONG x; | 
 |  | 
 |     v = get_pylong(v); | 
 |     if (v == NULL) | 
 |         return -1; | 
 |     assert(PyLong_Check(v)); | 
 |     x = PyLong_AsLongLong(v); | 
 |     Py_DECREF(v); | 
 |     if (x == (PY_LONG_LONG)-1 && PyErr_Occurred()) | 
 |         return -1; | 
 |     *p = x; | 
 |     return 0; | 
 | } | 
 |  | 
 | /* Same, but handling native unsigned long long. */ | 
 |  | 
 | static int | 
 | get_ulonglong(PyObject *v, unsigned PY_LONG_LONG *p) | 
 | { | 
 |     unsigned PY_LONG_LONG x; | 
 |  | 
 |     v = get_pylong(v); | 
 |     if (v == NULL) | 
 |         return -1; | 
 |     assert(PyLong_Check(v)); | 
 |     x = PyLong_AsUnsignedLongLong(v); | 
 |     Py_DECREF(v); | 
 |     if (x == (unsigned PY_LONG_LONG)-1 && PyErr_Occurred()) | 
 |         return -1; | 
 |     *p = x; | 
 |     return 0; | 
 | } | 
 |  | 
 | #endif | 
 |  | 
 | /* Floating point helpers */ | 
 |  | 
 | static PyObject * | 
 | unpack_float(const char *p,  /* start of 4-byte string */ | 
 |          int le)             /* true for little-endian, false for big-endian */ | 
 | { | 
 |     double x; | 
 |  | 
 |     x = _PyFloat_Unpack4((unsigned char *)p, le); | 
 |     if (x == -1.0 && PyErr_Occurred()) | 
 |         return NULL; | 
 |     return PyFloat_FromDouble(x); | 
 | } | 
 |  | 
 | static PyObject * | 
 | unpack_double(const char *p,  /* start of 8-byte string */ | 
 |           int le)         /* true for little-endian, false for big-endian */ | 
 | { | 
 |     double x; | 
 |  | 
 |     x = _PyFloat_Unpack8((unsigned char *)p, le); | 
 |     if (x == -1.0 && PyErr_Occurred()) | 
 |         return NULL; | 
 |     return PyFloat_FromDouble(x); | 
 | } | 
 |  | 
 | /* Helper to format the range error exceptions */ | 
 | static int | 
 | _range_error(const formatdef *f, int is_unsigned) | 
 | { | 
 |     /* ulargest is the largest unsigned value with f->size bytes. | 
 |      * Note that the simpler: | 
 |      *     ((size_t)1 << (f->size * 8)) - 1 | 
 |      * doesn't work when f->size == sizeof(size_t) because C doesn't | 
 |      * define what happens when a left shift count is >= the number of | 
 |      * bits in the integer being shifted; e.g., on some boxes it doesn't | 
 |      * shift at all when they're equal. | 
 |      */ | 
 |     const size_t ulargest = (size_t)-1 >> ((SIZEOF_SIZE_T - f->size)*8); | 
 |     assert(f->size >= 1 && f->size <= SIZEOF_SIZE_T); | 
 |     if (is_unsigned) | 
 |         PyErr_Format(StructError, | 
 |             "'%c' format requires 0 <= number <= %zu", | 
 |             f->format, | 
 |             ulargest); | 
 |     else { | 
 |         const Py_ssize_t largest = (Py_ssize_t)(ulargest >> 1); | 
 |         PyErr_Format(StructError, | 
 |             "'%c' format requires %zd <= number <= %zd", | 
 |             f->format, | 
 |             ~ largest, | 
 |             largest); | 
 |     } | 
 |     return -1; | 
 | } | 
 |  | 
 |  | 
 |  | 
 | /* A large number of small routines follow, with names of the form | 
 |  | 
 |    [bln][up]_TYPE | 
 |  | 
 |    [bln] distiguishes among big-endian, little-endian and native. | 
 |    [pu] distiguishes between pack (to struct) and unpack (from struct). | 
 |    TYPE is one of char, byte, ubyte, etc. | 
 | */ | 
 |  | 
 | /* Native mode routines. ****************************************************/ | 
 | /* NOTE: | 
 |    In all n[up]_<type> routines handling types larger than 1 byte, there is | 
 |    *no* guarantee that the p pointer is properly aligned for each type, | 
 |    therefore memcpy is called.  An intermediate variable is used to | 
 |    compensate for big-endian architectures. | 
 |    Normally both the intermediate variable and the memcpy call will be | 
 |    skipped by C optimisation in little-endian architectures (gcc >= 2.91 | 
 |    does this). */ | 
 |  | 
 | static PyObject * | 
 | nu_char(const char *p, const formatdef *f) | 
 | { | 
 |     return PyString_FromStringAndSize(p, 1); | 
 | } | 
 |  | 
 | static PyObject * | 
 | nu_byte(const char *p, const formatdef *f) | 
 | { | 
 |     return PyInt_FromLong((long) *(signed char *)p); | 
 | } | 
 |  | 
 | static PyObject * | 
 | nu_ubyte(const char *p, const formatdef *f) | 
 | { | 
 |     return PyInt_FromLong((long) *(unsigned char *)p); | 
 | } | 
 |  | 
 | static PyObject * | 
 | nu_short(const char *p, const formatdef *f) | 
 | { | 
 |     short x; | 
 |     memcpy((char *)&x, p, sizeof x); | 
 |     return PyInt_FromLong((long)x); | 
 | } | 
 |  | 
 | static PyObject * | 
 | nu_ushort(const char *p, const formatdef *f) | 
 | { | 
 |     unsigned short x; | 
 |     memcpy((char *)&x, p, sizeof x); | 
 |     return PyInt_FromLong((long)x); | 
 | } | 
 |  | 
 | static PyObject * | 
 | nu_int(const char *p, const formatdef *f) | 
 | { | 
 |     int x; | 
 |     memcpy((char *)&x, p, sizeof x); | 
 |     return PyInt_FromLong((long)x); | 
 | } | 
 |  | 
 | static PyObject * | 
 | nu_uint(const char *p, const formatdef *f) | 
 | { | 
 |     unsigned int x; | 
 |     memcpy((char *)&x, p, sizeof x); | 
 | #if (SIZEOF_LONG > SIZEOF_INT) | 
 |     return PyInt_FromLong((long)x); | 
 | #else | 
 |     if (x <= ((unsigned int)LONG_MAX)) | 
 |         return PyInt_FromLong((long)x); | 
 |     return PyLong_FromUnsignedLong((unsigned long)x); | 
 | #endif | 
 | } | 
 |  | 
 | static PyObject * | 
 | nu_long(const char *p, const formatdef *f) | 
 | { | 
 |     long x; | 
 |     memcpy((char *)&x, p, sizeof x); | 
 |     return PyInt_FromLong(x); | 
 | } | 
 |  | 
 | static PyObject * | 
 | nu_ulong(const char *p, const formatdef *f) | 
 | { | 
 |     unsigned long x; | 
 |     memcpy((char *)&x, p, sizeof x); | 
 |     if (x <= LONG_MAX) | 
 |         return PyInt_FromLong((long)x); | 
 |     return PyLong_FromUnsignedLong(x); | 
 | } | 
 |  | 
 | /* Native mode doesn't support q or Q unless the platform C supports | 
 |    long long (or, on Windows, __int64). */ | 
 |  | 
 | #ifdef HAVE_LONG_LONG | 
 |  | 
 | static PyObject * | 
 | nu_longlong(const char *p, const formatdef *f) | 
 | { | 
 |     PY_LONG_LONG x; | 
 |     memcpy((char *)&x, p, sizeof x); | 
 |     if (x >= LONG_MIN && x <= LONG_MAX) | 
 |         return PyInt_FromLong(Py_SAFE_DOWNCAST(x, PY_LONG_LONG, long)); | 
 |     return PyLong_FromLongLong(x); | 
 | } | 
 |  | 
 | static PyObject * | 
 | nu_ulonglong(const char *p, const formatdef *f) | 
 | { | 
 |     unsigned PY_LONG_LONG x; | 
 |     memcpy((char *)&x, p, sizeof x); | 
 |     if (x <= LONG_MAX) | 
 |         return PyInt_FromLong(Py_SAFE_DOWNCAST(x, unsigned PY_LONG_LONG, long)); | 
 |     return PyLong_FromUnsignedLongLong(x); | 
 | } | 
 |  | 
 | #endif | 
 |  | 
 | static PyObject * | 
 | nu_bool(const char *p, const formatdef *f) | 
 | { | 
 |     BOOL_TYPE x; | 
 |     memcpy((char *)&x, p, sizeof x); | 
 |     return PyBool_FromLong(x != 0); | 
 | } | 
 |  | 
 |  | 
 | static PyObject * | 
 | nu_float(const char *p, const formatdef *f) | 
 | { | 
 |     float x; | 
 |     memcpy((char *)&x, p, sizeof x); | 
 |     return PyFloat_FromDouble((double)x); | 
 | } | 
 |  | 
 | static PyObject * | 
 | nu_double(const char *p, const formatdef *f) | 
 | { | 
 |     double x; | 
 |     memcpy((char *)&x, p, sizeof x); | 
 |     return PyFloat_FromDouble(x); | 
 | } | 
 |  | 
 | static PyObject * | 
 | nu_void_p(const char *p, const formatdef *f) | 
 | { | 
 |     void *x; | 
 |     memcpy((char *)&x, p, sizeof x); | 
 |     return PyLong_FromVoidPtr(x); | 
 | } | 
 |  | 
 | static int | 
 | np_byte(char *p, PyObject *v, const formatdef *f) | 
 | { | 
 |     long x; | 
 |     if (get_long(v, &x) < 0) | 
 |         return -1; | 
 |     if (x < -128 || x > 127){ | 
 |         PyErr_SetString(StructError, | 
 |                         "byte format requires -128 <= number <= 127"); | 
 |         return -1; | 
 |     } | 
 |     *p = (char)x; | 
 |     return 0; | 
 | } | 
 |  | 
 | static int | 
 | np_ubyte(char *p, PyObject *v, const formatdef *f) | 
 | { | 
 |     long x; | 
 |     if (get_long(v, &x) < 0) | 
 |         return -1; | 
 |     if (x < 0 || x > 255){ | 
 |         PyErr_SetString(StructError, | 
 |                         "ubyte format requires 0 <= number <= 255"); | 
 |         return -1; | 
 |     } | 
 |     *p = (char)x; | 
 |     return 0; | 
 | } | 
 |  | 
 | static int | 
 | np_char(char *p, PyObject *v, const formatdef *f) | 
 | { | 
 |     if (!PyString_Check(v) || PyString_Size(v) != 1) { | 
 |         PyErr_SetString(StructError, | 
 |                         "char format require string of length 1"); | 
 |         return -1; | 
 |     } | 
 |     *p = *PyString_AsString(v); | 
 |     return 0; | 
 | } | 
 |  | 
 | static int | 
 | np_short(char *p, PyObject *v, const formatdef *f) | 
 | { | 
 |     long x; | 
 |     short y; | 
 |     if (get_long(v, &x) < 0) | 
 |         return -1; | 
 |     if (x < SHRT_MIN || x > SHRT_MAX){ | 
 |         PyErr_SetString(StructError, | 
 |                         "short format requires " STRINGIFY(SHRT_MIN) | 
 |                         " <= number <= " STRINGIFY(SHRT_MAX)); | 
 |         return -1; | 
 |     } | 
 |     y = (short)x; | 
 |     memcpy(p, (char *)&y, sizeof y); | 
 |     return 0; | 
 | } | 
 |  | 
 | static int | 
 | np_ushort(char *p, PyObject *v, const formatdef *f) | 
 | { | 
 |     long x; | 
 |     unsigned short y; | 
 |     if (get_long(v, &x) < 0) | 
 |         return -1; | 
 |     if (x < 0 || x > USHRT_MAX){ | 
 |         PyErr_SetString(StructError, | 
 |                         "ushort format requires 0 <= number <= " STRINGIFY(USHRT_MAX)); | 
 |         return -1; | 
 |     } | 
 |     y = (unsigned short)x; | 
 |     memcpy(p, (char *)&y, sizeof y); | 
 |     return 0; | 
 | } | 
 |  | 
 | static int | 
 | np_int(char *p, PyObject *v, const formatdef *f) | 
 | { | 
 |     long x; | 
 |     int y; | 
 |     if (get_long(v, &x) < 0) | 
 |         return -1; | 
 | #if (SIZEOF_LONG > SIZEOF_INT) | 
 |     if ((x < ((long)INT_MIN)) || (x > ((long)INT_MAX))) | 
 |         return _range_error(f, 0); | 
 | #endif | 
 |     y = (int)x; | 
 |     memcpy(p, (char *)&y, sizeof y); | 
 |     return 0; | 
 | } | 
 |  | 
 | static int | 
 | np_uint(char *p, PyObject *v, const formatdef *f) | 
 | { | 
 |     unsigned long x; | 
 |     unsigned int y; | 
 |     if (get_ulong(v, &x) < 0) | 
 |         return -1; | 
 |     y = (unsigned int)x; | 
 | #if (SIZEOF_LONG > SIZEOF_INT) | 
 |     if (x > ((unsigned long)UINT_MAX)) | 
 |         return _range_error(f, 1); | 
 | #endif | 
 |     memcpy(p, (char *)&y, sizeof y); | 
 |     return 0; | 
 | } | 
 |  | 
 | static int | 
 | np_long(char *p, PyObject *v, const formatdef *f) | 
 | { | 
 |     long x; | 
 |     if (get_long(v, &x) < 0) | 
 |         return -1; | 
 |     memcpy(p, (char *)&x, sizeof x); | 
 |     return 0; | 
 | } | 
 |  | 
 | static int | 
 | np_ulong(char *p, PyObject *v, const formatdef *f) | 
 | { | 
 |     unsigned long x; | 
 |     if (get_ulong(v, &x) < 0) | 
 |         return -1; | 
 |     memcpy(p, (char *)&x, sizeof x); | 
 |     return 0; | 
 | } | 
 |  | 
 | #ifdef HAVE_LONG_LONG | 
 |  | 
 | static int | 
 | np_longlong(char *p, PyObject *v, const formatdef *f) | 
 | { | 
 |     PY_LONG_LONG x; | 
 |     if (get_longlong(v, &x) < 0) | 
 |         return -1; | 
 |     memcpy(p, (char *)&x, sizeof x); | 
 |     return 0; | 
 | } | 
 |  | 
 | static int | 
 | np_ulonglong(char *p, PyObject *v, const formatdef *f) | 
 | { | 
 |     unsigned PY_LONG_LONG x; | 
 |     if (get_ulonglong(v, &x) < 0) | 
 |         return -1; | 
 |     memcpy(p, (char *)&x, sizeof x); | 
 |     return 0; | 
 | } | 
 | #endif | 
 |  | 
 |  | 
 | static int | 
 | np_bool(char *p, PyObject *v, const formatdef *f) | 
 | { | 
 |     int y; | 
 |     BOOL_TYPE x; | 
 |     y = PyObject_IsTrue(v); | 
 |     if (y < 0) | 
 |         return -1; | 
 |     x = y; | 
 |     memcpy(p, (char *)&x, sizeof x); | 
 |     return 0; | 
 | } | 
 |  | 
 | static int | 
 | np_float(char *p, PyObject *v, const formatdef *f) | 
 | { | 
 |     float x = (float)PyFloat_AsDouble(v); | 
 |     if (x == -1 && PyErr_Occurred()) { | 
 |         PyErr_SetString(StructError, | 
 |                         "required argument is not a float"); | 
 |         return -1; | 
 |     } | 
 |     memcpy(p, (char *)&x, sizeof x); | 
 |     return 0; | 
 | } | 
 |  | 
 | static int | 
 | np_double(char *p, PyObject *v, const formatdef *f) | 
 | { | 
 |     double x = PyFloat_AsDouble(v); | 
 |     if (x == -1 && PyErr_Occurred()) { | 
 |         PyErr_SetString(StructError, | 
 |                         "required argument is not a float"); | 
 |         return -1; | 
 |     } | 
 |     memcpy(p, (char *)&x, sizeof(double)); | 
 |     return 0; | 
 | } | 
 |  | 
 | static int | 
 | np_void_p(char *p, PyObject *v, const formatdef *f) | 
 | { | 
 |     void *x; | 
 |  | 
 |     v = get_pylong(v); | 
 |     if (v == NULL) | 
 |         return -1; | 
 |     assert(PyLong_Check(v)); | 
 |     x = PyLong_AsVoidPtr(v); | 
 |     Py_DECREF(v); | 
 |     if (x == NULL && PyErr_Occurred()) | 
 |         return -1; | 
 |     memcpy(p, (char *)&x, sizeof x); | 
 |     return 0; | 
 | } | 
 |  | 
 | static formatdef native_table[] = { | 
 |     {'x',       sizeof(char),   0,              NULL}, | 
 |     {'b',       sizeof(char),   0,              nu_byte,        np_byte}, | 
 |     {'B',       sizeof(char),   0,              nu_ubyte,       np_ubyte}, | 
 |     {'c',       sizeof(char),   0,              nu_char,        np_char}, | 
 |     {'s',       sizeof(char),   0,              NULL}, | 
 |     {'p',       sizeof(char),   0,              NULL}, | 
 |     {'h',       sizeof(short),  SHORT_ALIGN,    nu_short,       np_short}, | 
 |     {'H',       sizeof(short),  SHORT_ALIGN,    nu_ushort,      np_ushort}, | 
 |     {'i',       sizeof(int),    INT_ALIGN,      nu_int,         np_int}, | 
 |     {'I',       sizeof(int),    INT_ALIGN,      nu_uint,        np_uint}, | 
 |     {'l',       sizeof(long),   LONG_ALIGN,     nu_long,        np_long}, | 
 |     {'L',       sizeof(long),   LONG_ALIGN,     nu_ulong,       np_ulong}, | 
 | #ifdef HAVE_LONG_LONG | 
 |     {'q',       sizeof(PY_LONG_LONG), LONG_LONG_ALIGN, nu_longlong, np_longlong}, | 
 |     {'Q',       sizeof(PY_LONG_LONG), LONG_LONG_ALIGN, nu_ulonglong,np_ulonglong}, | 
 | #endif | 
 |     {'?',       sizeof(BOOL_TYPE),      BOOL_ALIGN,     nu_bool,        np_bool}, | 
 |     {'f',       sizeof(float),  FLOAT_ALIGN,    nu_float,       np_float}, | 
 |     {'d',       sizeof(double), DOUBLE_ALIGN,   nu_double,      np_double}, | 
 |     {'P',       sizeof(void *), VOID_P_ALIGN,   nu_void_p,      np_void_p}, | 
 |     {0} | 
 | }; | 
 |  | 
 | /* Big-endian routines. *****************************************************/ | 
 |  | 
 | static PyObject * | 
 | bu_int(const char *p, const formatdef *f) | 
 | { | 
 |     long x = 0; | 
 |     Py_ssize_t i = f->size; | 
 |     const unsigned char *bytes = (const unsigned char *)p; | 
 |     do { | 
 |         x = (x<<8) | *bytes++; | 
 |     } while (--i > 0); | 
 |     /* Extend the sign bit. */ | 
 |     if (SIZEOF_LONG > f->size) | 
 |         x |= -(x & (1L << ((8 * f->size) - 1))); | 
 |     return PyInt_FromLong(x); | 
 | } | 
 |  | 
 | static PyObject * | 
 | bu_uint(const char *p, const formatdef *f) | 
 | { | 
 |     unsigned long x = 0; | 
 |     Py_ssize_t i = f->size; | 
 |     const unsigned char *bytes = (const unsigned char *)p; | 
 |     do { | 
 |         x = (x<<8) | *bytes++; | 
 |     } while (--i > 0); | 
 |     if (x <= LONG_MAX) | 
 |         return PyInt_FromLong((long)x); | 
 |     return PyLong_FromUnsignedLong(x); | 
 | } | 
 |  | 
 | static PyObject * | 
 | bu_longlong(const char *p, const formatdef *f) | 
 | { | 
 | #ifdef HAVE_LONG_LONG | 
 |     PY_LONG_LONG x = 0; | 
 |     Py_ssize_t i = f->size; | 
 |     const unsigned char *bytes = (const unsigned char *)p; | 
 |     do { | 
 |         x = (x<<8) | *bytes++; | 
 |     } while (--i > 0); | 
 |     /* Extend the sign bit. */ | 
 |     if (SIZEOF_LONG_LONG > f->size) | 
 |         x |= -(x & ((PY_LONG_LONG)1 << ((8 * f->size) - 1))); | 
 |     if (x >= LONG_MIN && x <= LONG_MAX) | 
 |         return PyInt_FromLong(Py_SAFE_DOWNCAST(x, PY_LONG_LONG, long)); | 
 |     return PyLong_FromLongLong(x); | 
 | #else | 
 |     return _PyLong_FromByteArray((const unsigned char *)p, | 
 |                                   8, | 
 |                                   0, /* little-endian */ | 
 |                       1  /* signed */); | 
 | #endif | 
 | } | 
 |  | 
 | static PyObject * | 
 | bu_ulonglong(const char *p, const formatdef *f) | 
 | { | 
 | #ifdef HAVE_LONG_LONG | 
 |     unsigned PY_LONG_LONG x = 0; | 
 |     Py_ssize_t i = f->size; | 
 |     const unsigned char *bytes = (const unsigned char *)p; | 
 |     do { | 
 |         x = (x<<8) | *bytes++; | 
 |     } while (--i > 0); | 
 |     if (x <= LONG_MAX) | 
 |         return PyInt_FromLong(Py_SAFE_DOWNCAST(x, unsigned PY_LONG_LONG, long)); | 
 |     return PyLong_FromUnsignedLongLong(x); | 
 | #else | 
 |     return _PyLong_FromByteArray((const unsigned char *)p, | 
 |                                   8, | 
 |                                   0, /* little-endian */ | 
 |                       0  /* signed */); | 
 | #endif | 
 | } | 
 |  | 
 | static PyObject * | 
 | bu_float(const char *p, const formatdef *f) | 
 | { | 
 |     return unpack_float(p, 0); | 
 | } | 
 |  | 
 | static PyObject * | 
 | bu_double(const char *p, const formatdef *f) | 
 | { | 
 |     return unpack_double(p, 0); | 
 | } | 
 |  | 
 | static PyObject * | 
 | bu_bool(const char *p, const formatdef *f) | 
 | { | 
 |     char x; | 
 |     memcpy((char *)&x, p, sizeof x); | 
 |     return PyBool_FromLong(x != 0); | 
 | } | 
 |  | 
 | static int | 
 | bp_int(char *p, PyObject *v, const formatdef *f) | 
 | { | 
 |     long x; | 
 |     Py_ssize_t i; | 
 |     if (get_long(v, &x) < 0) | 
 |         return -1; | 
 |     i = f->size; | 
 |     if (i != SIZEOF_LONG) { | 
 |         if ((i == 2) && (x < -32768 || x > 32767)) | 
 |             return _range_error(f, 0); | 
 | #if (SIZEOF_LONG != 4) | 
 |         else if ((i == 4) && (x < -2147483648L || x > 2147483647L)) | 
 |             return _range_error(f, 0); | 
 | #endif | 
 |     } | 
 |     do { | 
 |         p[--i] = (char)x; | 
 |         x >>= 8; | 
 |     } while (i > 0); | 
 |     return 0; | 
 | } | 
 |  | 
 | static int | 
 | bp_uint(char *p, PyObject *v, const formatdef *f) | 
 | { | 
 |     unsigned long x; | 
 |     Py_ssize_t i; | 
 |     if (get_ulong(v, &x) < 0) | 
 |         return -1; | 
 |     i = f->size; | 
 |     if (i != SIZEOF_LONG) { | 
 |         unsigned long maxint = 1; | 
 |         maxint <<= (unsigned long)(i * 8); | 
 |         if (x >= maxint) | 
 |             return _range_error(f, 1); | 
 |     } | 
 |     do { | 
 |         p[--i] = (char)x; | 
 |         x >>= 8; | 
 |     } while (i > 0); | 
 |     return 0; | 
 | } | 
 |  | 
 | static int | 
 | bp_longlong(char *p, PyObject *v, const formatdef *f) | 
 | { | 
 |     int res; | 
 |     v = get_pylong(v); | 
 |     if (v == NULL) | 
 |         return -1; | 
 |     res = _PyLong_AsByteArray((PyLongObject *)v, | 
 |                               (unsigned char *)p, | 
 |                               8, | 
 |                               0, /* little_endian */ | 
 |                   1  /* signed */); | 
 |     Py_DECREF(v); | 
 |     return res; | 
 | } | 
 |  | 
 | static int | 
 | bp_ulonglong(char *p, PyObject *v, const formatdef *f) | 
 | { | 
 |     int res; | 
 |     v = get_pylong(v); | 
 |     if (v == NULL) | 
 |         return -1; | 
 |     res = _PyLong_AsByteArray((PyLongObject *)v, | 
 |                               (unsigned char *)p, | 
 |                               8, | 
 |                               0, /* little_endian */ | 
 |                   0  /* signed */); | 
 |     Py_DECREF(v); | 
 |     return res; | 
 | } | 
 |  | 
 | static int | 
 | bp_float(char *p, PyObject *v, const formatdef *f) | 
 | { | 
 |     double x = PyFloat_AsDouble(v); | 
 |     if (x == -1 && PyErr_Occurred()) { | 
 |         PyErr_SetString(StructError, | 
 |                         "required argument is not a float"); | 
 |         return -1; | 
 |     } | 
 |     return _PyFloat_Pack4(x, (unsigned char *)p, 0); | 
 | } | 
 |  | 
 | static int | 
 | bp_double(char *p, PyObject *v, const formatdef *f) | 
 | { | 
 |     double x = PyFloat_AsDouble(v); | 
 |     if (x == -1 && PyErr_Occurred()) { | 
 |         PyErr_SetString(StructError, | 
 |                         "required argument is not a float"); | 
 |         return -1; | 
 |     } | 
 |     return _PyFloat_Pack8(x, (unsigned char *)p, 0); | 
 | } | 
 |  | 
 | static int | 
 | bp_bool(char *p, PyObject *v, const formatdef *f) | 
 | { | 
 |     int y; | 
 |     y = PyObject_IsTrue(v); | 
 |     if (y < 0) | 
 |         return -1; | 
 |     *p = (char)y; | 
 |     return 0; | 
 | } | 
 |  | 
 | static formatdef bigendian_table[] = { | 
 |     {'x',       1,              0,              NULL}, | 
 |     {'b',       1,              0,              nu_byte,        np_byte}, | 
 |     {'B',       1,              0,              nu_ubyte,       np_ubyte}, | 
 |     {'c',       1,              0,              nu_char,        np_char}, | 
 |     {'s',       1,              0,              NULL}, | 
 |     {'p',       1,              0,              NULL}, | 
 |     {'h',       2,              0,              bu_int,         bp_int}, | 
 |     {'H',       2,              0,              bu_uint,        bp_uint}, | 
 |     {'i',       4,              0,              bu_int,         bp_int}, | 
 |     {'I',       4,              0,              bu_uint,        bp_uint}, | 
 |     {'l',       4,              0,              bu_int,         bp_int}, | 
 |     {'L',       4,              0,              bu_uint,        bp_uint}, | 
 |     {'q',       8,              0,              bu_longlong,    bp_longlong}, | 
 |     {'Q',       8,              0,              bu_ulonglong,   bp_ulonglong}, | 
 |     {'?',       1,              0,              bu_bool,        bp_bool}, | 
 |     {'f',       4,              0,              bu_float,       bp_float}, | 
 |     {'d',       8,              0,              bu_double,      bp_double}, | 
 |     {0} | 
 | }; | 
 |  | 
 | /* Little-endian routines. *****************************************************/ | 
 |  | 
 | static PyObject * | 
 | lu_int(const char *p, const formatdef *f) | 
 | { | 
 |     long x = 0; | 
 |     Py_ssize_t i = f->size; | 
 |     const unsigned char *bytes = (const unsigned char *)p; | 
 |     do { | 
 |         x = (x<<8) | bytes[--i]; | 
 |     } while (i > 0); | 
 |     /* Extend the sign bit. */ | 
 |     if (SIZEOF_LONG > f->size) | 
 |         x |= -(x & (1L << ((8 * f->size) - 1))); | 
 |     return PyInt_FromLong(x); | 
 | } | 
 |  | 
 | static PyObject * | 
 | lu_uint(const char *p, const formatdef *f) | 
 | { | 
 |     unsigned long x = 0; | 
 |     Py_ssize_t i = f->size; | 
 |     const unsigned char *bytes = (const unsigned char *)p; | 
 |     do { | 
 |         x = (x<<8) | bytes[--i]; | 
 |     } while (i > 0); | 
 |     if (x <= LONG_MAX) | 
 |         return PyInt_FromLong((long)x); | 
 |     return PyLong_FromUnsignedLong((long)x); | 
 | } | 
 |  | 
 | static PyObject * | 
 | lu_longlong(const char *p, const formatdef *f) | 
 | { | 
 | #ifdef HAVE_LONG_LONG | 
 |     PY_LONG_LONG x = 0; | 
 |     Py_ssize_t i = f->size; | 
 |     const unsigned char *bytes = (const unsigned char *)p; | 
 |     do { | 
 |         x = (x<<8) | bytes[--i]; | 
 |     } while (i > 0); | 
 |     /* Extend the sign bit. */ | 
 |     if (SIZEOF_LONG_LONG > f->size) | 
 |         x |= -(x & ((PY_LONG_LONG)1 << ((8 * f->size) - 1))); | 
 |     if (x >= LONG_MIN && x <= LONG_MAX) | 
 |         return PyInt_FromLong(Py_SAFE_DOWNCAST(x, PY_LONG_LONG, long)); | 
 |     return PyLong_FromLongLong(x); | 
 | #else | 
 |     return _PyLong_FromByteArray((const unsigned char *)p, | 
 |                                   8, | 
 |                                   1, /* little-endian */ | 
 |                       1  /* signed */); | 
 | #endif | 
 | } | 
 |  | 
 | static PyObject * | 
 | lu_ulonglong(const char *p, const formatdef *f) | 
 | { | 
 | #ifdef HAVE_LONG_LONG | 
 |     unsigned PY_LONG_LONG x = 0; | 
 |     Py_ssize_t i = f->size; | 
 |     const unsigned char *bytes = (const unsigned char *)p; | 
 |     do { | 
 |         x = (x<<8) | bytes[--i]; | 
 |     } while (i > 0); | 
 |     if (x <= LONG_MAX) | 
 |         return PyInt_FromLong(Py_SAFE_DOWNCAST(x, unsigned PY_LONG_LONG, long)); | 
 |     return PyLong_FromUnsignedLongLong(x); | 
 | #else | 
 |     return _PyLong_FromByteArray((const unsigned char *)p, | 
 |                                   8, | 
 |                                   1, /* little-endian */ | 
 |                       0  /* signed */); | 
 | #endif | 
 | } | 
 |  | 
 | static PyObject * | 
 | lu_float(const char *p, const formatdef *f) | 
 | { | 
 |     return unpack_float(p, 1); | 
 | } | 
 |  | 
 | static PyObject * | 
 | lu_double(const char *p, const formatdef *f) | 
 | { | 
 |     return unpack_double(p, 1); | 
 | } | 
 |  | 
 | static int | 
 | lp_int(char *p, PyObject *v, const formatdef *f) | 
 | { | 
 |     long x; | 
 |     Py_ssize_t i; | 
 |     if (get_long(v, &x) < 0) | 
 |         return -1; | 
 |     i = f->size; | 
 |     if (i != SIZEOF_LONG) { | 
 |         if ((i == 2) && (x < -32768 || x > 32767)) | 
 |             return _range_error(f, 0); | 
 | #if (SIZEOF_LONG != 4) | 
 |         else if ((i == 4) && (x < -2147483648L || x > 2147483647L)) | 
 |             return _range_error(f, 0); | 
 | #endif | 
 |     } | 
 |     do { | 
 |         *p++ = (char)x; | 
 |         x >>= 8; | 
 |     } while (--i > 0); | 
 |     return 0; | 
 | } | 
 |  | 
 | static int | 
 | lp_uint(char *p, PyObject *v, const formatdef *f) | 
 | { | 
 |     unsigned long x; | 
 |     Py_ssize_t i; | 
 |     if (get_ulong(v, &x) < 0) | 
 |         return -1; | 
 |     i = f->size; | 
 |     if (i != SIZEOF_LONG) { | 
 |         unsigned long maxint = 1; | 
 |         maxint <<= (unsigned long)(i * 8); | 
 |         if (x >= maxint) | 
 |             return _range_error(f, 1); | 
 |     } | 
 |     do { | 
 |         *p++ = (char)x; | 
 |         x >>= 8; | 
 |     } while (--i > 0); | 
 |     return 0; | 
 | } | 
 |  | 
 | static int | 
 | lp_longlong(char *p, PyObject *v, const formatdef *f) | 
 | { | 
 |     int res; | 
 |     v = get_pylong(v); | 
 |     if (v == NULL) | 
 |         return -1; | 
 |     res = _PyLong_AsByteArray((PyLongObject*)v, | 
 |                               (unsigned char *)p, | 
 |                               8, | 
 |                               1, /* little_endian */ | 
 |                   1  /* signed */); | 
 |     Py_DECREF(v); | 
 |     return res; | 
 | } | 
 |  | 
 | static int | 
 | lp_ulonglong(char *p, PyObject *v, const formatdef *f) | 
 | { | 
 |     int res; | 
 |     v = get_pylong(v); | 
 |     if (v == NULL) | 
 |         return -1; | 
 |     res = _PyLong_AsByteArray((PyLongObject*)v, | 
 |                               (unsigned char *)p, | 
 |                               8, | 
 |                               1, /* little_endian */ | 
 |                   0  /* signed */); | 
 |     Py_DECREF(v); | 
 |     return res; | 
 | } | 
 |  | 
 | static int | 
 | lp_float(char *p, PyObject *v, const formatdef *f) | 
 | { | 
 |     double x = PyFloat_AsDouble(v); | 
 |     if (x == -1 && PyErr_Occurred()) { | 
 |         PyErr_SetString(StructError, | 
 |                         "required argument is not a float"); | 
 |         return -1; | 
 |     } | 
 |     return _PyFloat_Pack4(x, (unsigned char *)p, 1); | 
 | } | 
 |  | 
 | static int | 
 | lp_double(char *p, PyObject *v, const formatdef *f) | 
 | { | 
 |     double x = PyFloat_AsDouble(v); | 
 |     if (x == -1 && PyErr_Occurred()) { | 
 |         PyErr_SetString(StructError, | 
 |                         "required argument is not a float"); | 
 |         return -1; | 
 |     } | 
 |     return _PyFloat_Pack8(x, (unsigned char *)p, 1); | 
 | } | 
 |  | 
 | static formatdef lilendian_table[] = { | 
 |     {'x',       1,              0,              NULL}, | 
 |     {'b',       1,              0,              nu_byte,        np_byte}, | 
 |     {'B',       1,              0,              nu_ubyte,       np_ubyte}, | 
 |     {'c',       1,              0,              nu_char,        np_char}, | 
 |     {'s',       1,              0,              NULL}, | 
 |     {'p',       1,              0,              NULL}, | 
 |     {'h',       2,              0,              lu_int,         lp_int}, | 
 |     {'H',       2,              0,              lu_uint,        lp_uint}, | 
 |     {'i',       4,              0,              lu_int,         lp_int}, | 
 |     {'I',       4,              0,              lu_uint,        lp_uint}, | 
 |     {'l',       4,              0,              lu_int,         lp_int}, | 
 |     {'L',       4,              0,              lu_uint,        lp_uint}, | 
 |     {'q',       8,              0,              lu_longlong,    lp_longlong}, | 
 |     {'Q',       8,              0,              lu_ulonglong,   lp_ulonglong}, | 
 |     {'?',       1,              0,              bu_bool,        bp_bool}, /* Std rep not endian dep, | 
 |         but potentially different from native rep -- reuse bx_bool funcs. */ | 
 |     {'f',       4,              0,              lu_float,       lp_float}, | 
 |     {'d',       8,              0,              lu_double,      lp_double}, | 
 |     {0} | 
 | }; | 
 |  | 
 |  | 
 | static const formatdef * | 
 | whichtable(char **pfmt) | 
 | { | 
 |     const char *fmt = (*pfmt)++; /* May be backed out of later */ | 
 |     switch (*fmt) { | 
 |     case '<': | 
 |         return lilendian_table; | 
 |     case '>': | 
 |     case '!': /* Network byte order is big-endian */ | 
 |         return bigendian_table; | 
 |     case '=': { /* Host byte order -- different from native in aligment! */ | 
 |         int n = 1; | 
 |         char *p = (char *) &n; | 
 |         if (*p == 1) | 
 |             return lilendian_table; | 
 |         else | 
 |             return bigendian_table; | 
 |     } | 
 |     default: | 
 |         --*pfmt; /* Back out of pointer increment */ | 
 |         /* Fall through */ | 
 |     case '@': | 
 |         return native_table; | 
 |     } | 
 | } | 
 |  | 
 |  | 
 | /* Get the table entry for a format code */ | 
 |  | 
 | static const formatdef * | 
 | getentry(int c, const formatdef *f) | 
 | { | 
 |     for (; f->format != '\0'; f++) { | 
 |         if (f->format == c) { | 
 |             return f; | 
 |         } | 
 |     } | 
 |     PyErr_SetString(StructError, "bad char in struct format"); | 
 |     return NULL; | 
 | } | 
 |  | 
 |  | 
 | /* Align a size according to a format code.  Return -1 on overflow. */ | 
 |  | 
 | static Py_ssize_t | 
 | align(Py_ssize_t size, char c, const formatdef *e) | 
 | { | 
 |     Py_ssize_t extra; | 
 |  | 
 |     if (e->format == c) { | 
 |         if (e->alignment && size > 0) { | 
 |             extra = (e->alignment - 1) - (size - 1) % (e->alignment); | 
 |             if (extra > PY_SSIZE_T_MAX - size) | 
 |                 return -1; | 
 |             size += extra; | 
 |         } | 
 |     } | 
 |     return size; | 
 | } | 
 |  | 
 |  | 
 | /* calculate the size of a format string */ | 
 |  | 
 | static int | 
 | prepare_s(PyStructObject *self) | 
 | { | 
 |     const formatdef *f; | 
 |     const formatdef *e; | 
 |     formatcode *codes; | 
 |  | 
 |     const char *s; | 
 |     const char *fmt; | 
 |     char c; | 
 |     Py_ssize_t size, len, num, itemsize; | 
 |  | 
 |     fmt = PyString_AS_STRING(self->s_format); | 
 |  | 
 |     f = whichtable((char **)&fmt); | 
 |  | 
 |     s = fmt; | 
 |     size = 0; | 
 |     len = 0; | 
 |     while ((c = *s++) != '\0') { | 
 |         if (isspace(Py_CHARMASK(c))) | 
 |             continue; | 
 |         if ('0' <= c && c <= '9') { | 
 |             num = c - '0'; | 
 |             while ('0' <= (c = *s++) && c <= '9') { | 
 |                 /* overflow-safe version of | 
 |                    if (num*10 + (c - '0') > PY_SSIZE_T_MAX) { ... } */ | 
 |                 if (num >= PY_SSIZE_T_MAX / 10 && ( | 
 |                         num > PY_SSIZE_T_MAX / 10 || | 
 |                         (c - '0') > PY_SSIZE_T_MAX % 10)) | 
 |                     goto overflow; | 
 |                 num = num*10 + (c - '0'); | 
 |             } | 
 |             if (c == '\0') | 
 |                 break; | 
 |         } | 
 |         else | 
 |             num = 1; | 
 |  | 
 |         e = getentry(c, f); | 
 |         if (e == NULL) | 
 |             return -1; | 
 |  | 
 |         switch (c) { | 
 |             case 's': /* fall through */ | 
 |             case 'p': len++; break; | 
 |             case 'x': break; | 
 |             default: len += num; break; | 
 |         } | 
 |  | 
 |         itemsize = e->size; | 
 |         size = align(size, c, e); | 
 |         if (size == -1) | 
 |             goto overflow; | 
 |  | 
 |         /* if (size + num * itemsize > PY_SSIZE_T_MAX) { ... } */ | 
 |         if (num > (PY_SSIZE_T_MAX - size) / itemsize) | 
 |             goto overflow; | 
 |         size += num * itemsize; | 
 |     } | 
 |  | 
 |     /* check for overflow */ | 
 |     if ((len + 1) > (PY_SSIZE_T_MAX / sizeof(formatcode))) { | 
 |         PyErr_NoMemory(); | 
 |         return -1; | 
 |     } | 
 |  | 
 |     self->s_size = size; | 
 |     self->s_len = len; | 
 |     codes = PyMem_MALLOC((len + 1) * sizeof(formatcode)); | 
 |     if (codes == NULL) { | 
 |         PyErr_NoMemory(); | 
 |         return -1; | 
 |     } | 
 |     /* Free any s_codes value left over from a previous initialization. */ | 
 |     if (self->s_codes != NULL) | 
 |         PyMem_FREE(self->s_codes); | 
 |     self->s_codes = codes; | 
 |  | 
 |     s = fmt; | 
 |     size = 0; | 
 |     while ((c = *s++) != '\0') { | 
 |         if (isspace(Py_CHARMASK(c))) | 
 |             continue; | 
 |         if ('0' <= c && c <= '9') { | 
 |             num = c - '0'; | 
 |             while ('0' <= (c = *s++) && c <= '9') | 
 |                 num = num*10 + (c - '0'); | 
 |             if (c == '\0') | 
 |                 break; | 
 |         } | 
 |         else | 
 |             num = 1; | 
 |  | 
 |         e = getentry(c, f); | 
 |  | 
 |         size = align(size, c, e); | 
 |         if (c == 's' || c == 'p') { | 
 |             codes->offset = size; | 
 |             codes->size = num; | 
 |             codes->fmtdef = e; | 
 |             codes++; | 
 |             size += num; | 
 |         } else if (c == 'x') { | 
 |             size += num; | 
 |         } else { | 
 |             while (--num >= 0) { | 
 |                 codes->offset = size; | 
 |                 codes->size = e->size; | 
 |                 codes->fmtdef = e; | 
 |                 codes++; | 
 |                 size += e->size; | 
 |             } | 
 |         } | 
 |     } | 
 |     codes->fmtdef = NULL; | 
 |     codes->offset = size; | 
 |     codes->size = 0; | 
 |  | 
 |     return 0; | 
 |  | 
 |   overflow: | 
 |     PyErr_SetString(StructError, | 
 |                     "total struct size too long"); | 
 |     return -1; | 
 | } | 
 |  | 
 | static PyObject * | 
 | s_new(PyTypeObject *type, PyObject *args, PyObject *kwds) | 
 | { | 
 |     PyObject *self; | 
 |  | 
 |     assert(type != NULL && type->tp_alloc != NULL); | 
 |  | 
 |     self = type->tp_alloc(type, 0); | 
 |     if (self != NULL) { | 
 |         PyStructObject *s = (PyStructObject*)self; | 
 |         Py_INCREF(Py_None); | 
 |         s->s_format = Py_None; | 
 |         s->s_codes = NULL; | 
 |         s->s_size = -1; | 
 |         s->s_len = -1; | 
 |     } | 
 |     return self; | 
 | } | 
 |  | 
 | static int | 
 | s_init(PyObject *self, PyObject *args, PyObject *kwds) | 
 | { | 
 |     PyStructObject *soself = (PyStructObject *)self; | 
 |     PyObject *o_format = NULL; | 
 |     int ret = 0; | 
 |     static char *kwlist[] = {"format", 0}; | 
 |  | 
 |     assert(PyStruct_Check(self)); | 
 |  | 
 |     if (!PyArg_ParseTupleAndKeywords(args, kwds, "S:Struct", kwlist, | 
 |                                      &o_format)) | 
 |         return -1; | 
 |  | 
 |     Py_INCREF(o_format); | 
 |     Py_CLEAR(soself->s_format); | 
 |     soself->s_format = o_format; | 
 |  | 
 |     ret = prepare_s(soself); | 
 |     return ret; | 
 | } | 
 |  | 
 | static void | 
 | s_dealloc(PyStructObject *s) | 
 | { | 
 |     if (s->weakreflist != NULL) | 
 |         PyObject_ClearWeakRefs((PyObject *)s); | 
 |     if (s->s_codes != NULL) { | 
 |         PyMem_FREE(s->s_codes); | 
 |     } | 
 |     Py_XDECREF(s->s_format); | 
 |     Py_TYPE(s)->tp_free((PyObject *)s); | 
 | } | 
 |  | 
 | static PyObject * | 
 | s_unpack_internal(PyStructObject *soself, char *startfrom) { | 
 |     formatcode *code; | 
 |     Py_ssize_t i = 0; | 
 |     PyObject *result = PyTuple_New(soself->s_len); | 
 |     if (result == NULL) | 
 |         return NULL; | 
 |  | 
 |     for (code = soself->s_codes; code->fmtdef != NULL; code++) { | 
 |         PyObject *v; | 
 |         const formatdef *e = code->fmtdef; | 
 |         const char *res = startfrom + code->offset; | 
 |         if (e->format == 's') { | 
 |             v = PyString_FromStringAndSize(res, code->size); | 
 |         } else if (e->format == 'p') { | 
 |             Py_ssize_t n = *(unsigned char*)res; | 
 |             if (n >= code->size) | 
 |                 n = code->size - 1; | 
 |             v = PyString_FromStringAndSize(res + 1, n); | 
 |         } else { | 
 |             v = e->unpack(res, e); | 
 |         } | 
 |         if (v == NULL) | 
 |             goto fail; | 
 |         PyTuple_SET_ITEM(result, i++, v); | 
 |     } | 
 |  | 
 |     return result; | 
 | fail: | 
 |     Py_DECREF(result); | 
 |     return NULL; | 
 | } | 
 |  | 
 |  | 
 | PyDoc_STRVAR(s_unpack__doc__, | 
 | "S.unpack(str) -> (v1, v2, ...)\n\ | 
 | \n\ | 
 | Return tuple containing values unpacked according to this Struct's format.\n\ | 
 | Requires len(str) == self.size. See struct.__doc__ for more on format\n\ | 
 | strings."); | 
 |  | 
 | static PyObject * | 
 | s_unpack(PyObject *self, PyObject *inputstr) | 
 | { | 
 |     char *start; | 
 |     Py_ssize_t len; | 
 |     PyObject *args=NULL, *result; | 
 |     PyStructObject *soself = (PyStructObject *)self; | 
 |     assert(PyStruct_Check(self)); | 
 |     assert(soself->s_codes != NULL); | 
 |     if (inputstr == NULL) | 
 |         goto fail; | 
 |     if (PyString_Check(inputstr) && | 
 |         PyString_GET_SIZE(inputstr) == soself->s_size) { | 
 |             return s_unpack_internal(soself, PyString_AS_STRING(inputstr)); | 
 |     } | 
 |     args = PyTuple_Pack(1, inputstr); | 
 |     if (args == NULL) | 
 |         return NULL; | 
 |     if (!PyArg_ParseTuple(args, "s#:unpack", &start, &len)) | 
 |         goto fail; | 
 |     if (soself->s_size != len) | 
 |         goto fail; | 
 |     result = s_unpack_internal(soself, start); | 
 |     Py_DECREF(args); | 
 |     return result; | 
 |  | 
 | fail: | 
 |     Py_XDECREF(args); | 
 |     PyErr_Format(StructError, | 
 |         "unpack requires a string argument of length %zd", | 
 |         soself->s_size); | 
 |     return NULL; | 
 | } | 
 |  | 
 | PyDoc_STRVAR(s_unpack_from__doc__, | 
 | "S.unpack_from(buffer[, offset]) -> (v1, v2, ...)\n\ | 
 | \n\ | 
 | Return tuple containing values unpacked according to this Struct's format.\n\ | 
 | Unlike unpack, unpack_from can unpack values from any object supporting\n\ | 
 | the buffer API, not just str. Requires len(buffer[offset:]) >= self.size.\n\ | 
 | See struct.__doc__ for more on format strings."); | 
 |  | 
 | static PyObject * | 
 | s_unpack_from(PyObject *self, PyObject *args, PyObject *kwds) | 
 | { | 
 |     static char *kwlist[] = {"buffer", "offset", 0}; | 
 | #if (PY_VERSION_HEX < 0x02050000) | 
 |     static char *fmt = "z#|i:unpack_from"; | 
 | #else | 
 |     static char *fmt = "z#|n:unpack_from"; | 
 | #endif | 
 |     Py_ssize_t buffer_len = 0, offset = 0; | 
 |     char *buffer = NULL; | 
 |     PyStructObject *soself = (PyStructObject *)self; | 
 |     assert(PyStruct_Check(self)); | 
 |     assert(soself->s_codes != NULL); | 
 |  | 
 |     if (!PyArg_ParseTupleAndKeywords(args, kwds, fmt, kwlist, | 
 |                                      &buffer, &buffer_len, &offset)) | 
 |         return NULL; | 
 |  | 
 |     if (buffer == NULL) { | 
 |         PyErr_Format(StructError, | 
 |             "unpack_from requires a buffer argument"); | 
 |         return NULL; | 
 |     } | 
 |  | 
 |     if (offset < 0) | 
 |         offset += buffer_len; | 
 |  | 
 |     if (offset < 0 || (buffer_len - offset) < soself->s_size) { | 
 |         PyErr_Format(StructError, | 
 |             "unpack_from requires a buffer of at least %zd bytes", | 
 |             soself->s_size); | 
 |         return NULL; | 
 |     } | 
 |     return s_unpack_internal(soself, buffer + offset); | 
 | } | 
 |  | 
 |  | 
 | /* | 
 |  * Guts of the pack function. | 
 |  * | 
 |  * Takes a struct object, a tuple of arguments, and offset in that tuple of | 
 |  * argument for where to start processing the arguments for packing, and a | 
 |  * character buffer for writing the packed string.  The caller must insure | 
 |  * that the buffer may contain the required length for packing the arguments. | 
 |  * 0 is returned on success, 1 is returned if there is an error. | 
 |  * | 
 |  */ | 
 | static int | 
 | s_pack_internal(PyStructObject *soself, PyObject *args, int offset, char* buf) | 
 | { | 
 |     formatcode *code; | 
 |     /* XXX(nnorwitz): why does i need to be a local?  can we use | 
 |        the offset parameter or do we need the wider width? */ | 
 |     Py_ssize_t i; | 
 |  | 
 |     memset(buf, '\0', soself->s_size); | 
 |     i = offset; | 
 |     for (code = soself->s_codes; code->fmtdef != NULL; code++) { | 
 |         Py_ssize_t n; | 
 |         PyObject *v = PyTuple_GET_ITEM(args, i++); | 
 |         const formatdef *e = code->fmtdef; | 
 |         char *res = buf + code->offset; | 
 |         if (e->format == 's') { | 
 |             if (!PyString_Check(v)) { | 
 |                 PyErr_SetString(StructError, | 
 |                                 "argument for 's' must " | 
 |                                 "be a string"); | 
 |                 return -1; | 
 |             } | 
 |             n = PyString_GET_SIZE(v); | 
 |             if (n > code->size) | 
 |                 n = code->size; | 
 |             if (n > 0) | 
 |                 memcpy(res, PyString_AS_STRING(v), n); | 
 |         } else if (e->format == 'p') { | 
 |             if (!PyString_Check(v)) { | 
 |                 PyErr_SetString(StructError, | 
 |                                 "argument for 'p' must " | 
 |                                 "be a string"); | 
 |                 return -1; | 
 |             } | 
 |             n = PyString_GET_SIZE(v); | 
 |             if (n > (code->size - 1)) | 
 |                 n = code->size - 1; | 
 |             if (n > 0) | 
 |                 memcpy(res + 1, PyString_AS_STRING(v), n); | 
 |             if (n > 255) | 
 |                 n = 255; | 
 |             *res = Py_SAFE_DOWNCAST(n, Py_ssize_t, unsigned char); | 
 |         } else if (e->pack(res, v, e) < 0) { | 
 |             if (strchr(integer_codes, e->format) != NULL && | 
 |                 PyErr_ExceptionMatches(PyExc_OverflowError)) | 
 |                 PyErr_Format(StructError, | 
 |                              "integer out of range for " | 
 |                              "'%c' format code", | 
 |                              e->format); | 
 |             return -1; | 
 |         } | 
 |     } | 
 |  | 
 |     /* Success */ | 
 |     return 0; | 
 | } | 
 |  | 
 |  | 
 | PyDoc_STRVAR(s_pack__doc__, | 
 | "S.pack(v1, v2, ...) -> string\n\ | 
 | \n\ | 
 | Return a string containing values v1, v2, ... packed according to this\n\ | 
 | Struct's format. See struct.__doc__ for more on format strings."); | 
 |  | 
 | static PyObject * | 
 | s_pack(PyObject *self, PyObject *args) | 
 | { | 
 |     PyStructObject *soself; | 
 |     PyObject *result; | 
 |  | 
 |     /* Validate arguments. */ | 
 |     soself = (PyStructObject *)self; | 
 |     assert(PyStruct_Check(self)); | 
 |     assert(soself->s_codes != NULL); | 
 |     if (PyTuple_GET_SIZE(args) != soself->s_len) | 
 |     { | 
 |         PyErr_Format(StructError, | 
 |             "pack requires exactly %zd arguments", soself->s_len); | 
 |         return NULL; | 
 |     } | 
 |  | 
 |     /* Allocate a new string */ | 
 |     result = PyString_FromStringAndSize((char *)NULL, soself->s_size); | 
 |     if (result == NULL) | 
 |         return NULL; | 
 |  | 
 |     /* Call the guts */ | 
 |     if ( s_pack_internal(soself, args, 0, PyString_AS_STRING(result)) != 0 ) { | 
 |         Py_DECREF(result); | 
 |         return NULL; | 
 |     } | 
 |  | 
 |     return result; | 
 | } | 
 |  | 
 | PyDoc_STRVAR(s_pack_into__doc__, | 
 | "S.pack_into(buffer, offset, v1, v2, ...)\n\ | 
 | \n\ | 
 | Pack the values v1, v2, ... according to this Struct's format, write \n\ | 
 | the packed bytes into the writable buffer buf starting at offset.  Note\n\ | 
 | that the offset is not an optional argument.  See struct.__doc__ for \n\ | 
 | more on format strings."); | 
 |  | 
 | static PyObject * | 
 | s_pack_into(PyObject *self, PyObject *args) | 
 | { | 
 |     PyStructObject *soself; | 
 |     char *buffer; | 
 |     Py_ssize_t buffer_len, offset; | 
 |  | 
 |     /* Validate arguments.  +1 is for the first arg as buffer. */ | 
 |     soself = (PyStructObject *)self; | 
 |     assert(PyStruct_Check(self)); | 
 |     assert(soself->s_codes != NULL); | 
 |     if (PyTuple_GET_SIZE(args) != (soself->s_len + 2)) | 
 |     { | 
 |         PyErr_Format(StructError, | 
 |                      "pack_into requires exactly %zd arguments", | 
 |                      (soself->s_len + 2)); | 
 |         return NULL; | 
 |     } | 
 |  | 
 |     /* Extract a writable memory buffer from the first argument */ | 
 |     if ( PyObject_AsWriteBuffer(PyTuple_GET_ITEM(args, 0), | 
 |                                                             (void**)&buffer, &buffer_len) == -1 ) { | 
 |         return NULL; | 
 |     } | 
 |     assert( buffer_len >= 0 ); | 
 |  | 
 |     /* Extract the offset from the first argument */ | 
 |     offset = PyInt_AsSsize_t(PyTuple_GET_ITEM(args, 1)); | 
 |     if (offset == -1 && PyErr_Occurred()) | 
 |         return NULL; | 
 |  | 
 |     /* Support negative offsets. */ | 
 |     if (offset < 0) | 
 |         offset += buffer_len; | 
 |  | 
 |     /* Check boundaries */ | 
 |     if (offset < 0 || (buffer_len - offset) < soself->s_size) { | 
 |         PyErr_Format(StructError, | 
 |                      "pack_into requires a buffer of at least %zd bytes", | 
 |                      soself->s_size); | 
 |         return NULL; | 
 |     } | 
 |  | 
 |     /* Call the guts */ | 
 |     if ( s_pack_internal(soself, args, 2, buffer + offset) != 0 ) { | 
 |         return NULL; | 
 |     } | 
 |  | 
 |     Py_RETURN_NONE; | 
 | } | 
 |  | 
 | static PyObject * | 
 | s_get_format(PyStructObject *self, void *unused) | 
 | { | 
 |     Py_INCREF(self->s_format); | 
 |     return self->s_format; | 
 | } | 
 |  | 
 | static PyObject * | 
 | s_get_size(PyStructObject *self, void *unused) | 
 | { | 
 |     return PyInt_FromSsize_t(self->s_size); | 
 | } | 
 |  | 
 | /* List of functions */ | 
 |  | 
 | static struct PyMethodDef s_methods[] = { | 
 |     {"pack",            s_pack,         METH_VARARGS, s_pack__doc__}, | 
 |     {"pack_into",       s_pack_into,    METH_VARARGS, s_pack_into__doc__}, | 
 |     {"unpack",          s_unpack,       METH_O, s_unpack__doc__}, | 
 |     {"unpack_from",     (PyCFunction)s_unpack_from, METH_VARARGS|METH_KEYWORDS, | 
 |                     s_unpack_from__doc__}, | 
 |     {NULL,       NULL}          /* sentinel */ | 
 | }; | 
 |  | 
 | PyDoc_STRVAR(s__doc__, "Compiled struct object"); | 
 |  | 
 | #define OFF(x) offsetof(PyStructObject, x) | 
 |  | 
 | static PyGetSetDef s_getsetlist[] = { | 
 |     {"format", (getter)s_get_format, (setter)NULL, "struct format string", NULL}, | 
 |     {"size", (getter)s_get_size, (setter)NULL, "struct size in bytes", NULL}, | 
 |     {NULL} /* sentinel */ | 
 | }; | 
 |  | 
 | static | 
 | PyTypeObject PyStructType = { | 
 |     PyVarObject_HEAD_INIT(NULL, 0) | 
 |     "Struct", | 
 |     sizeof(PyStructObject), | 
 |     0, | 
 |     (destructor)s_dealloc,      /* tp_dealloc */ | 
 |     0,                                          /* tp_print */ | 
 |     0,                                          /* tp_getattr */ | 
 |     0,                                          /* tp_setattr */ | 
 |     0,                                          /* tp_compare */ | 
 |     0,                                          /* tp_repr */ | 
 |     0,                                          /* tp_as_number */ | 
 |     0,                                          /* tp_as_sequence */ | 
 |     0,                                          /* tp_as_mapping */ | 
 |     0,                                          /* tp_hash */ | 
 |     0,                                          /* tp_call */ | 
 |     0,                                          /* tp_str */ | 
 |     PyObject_GenericGetAttr,            /* tp_getattro */ | 
 |     PyObject_GenericSetAttr,            /* tp_setattro */ | 
 |     0,                                          /* tp_as_buffer */ | 
 |     Py_TPFLAGS_DEFAULT | Py_TPFLAGS_BASETYPE | Py_TPFLAGS_HAVE_WEAKREFS,/* tp_flags */ | 
 |     s__doc__,                           /* tp_doc */ | 
 |     0,                                          /* tp_traverse */ | 
 |     0,                                          /* tp_clear */ | 
 |     0,                                          /* tp_richcompare */ | 
 |     offsetof(PyStructObject, weakreflist),      /* tp_weaklistoffset */ | 
 |     0,                                          /* tp_iter */ | 
 |     0,                                          /* tp_iternext */ | 
 |     s_methods,                          /* tp_methods */ | 
 |     NULL,                               /* tp_members */ | 
 |     s_getsetlist,               /* tp_getset */ | 
 |     0,                                          /* tp_base */ | 
 |     0,                                          /* tp_dict */ | 
 |     0,                                          /* tp_descr_get */ | 
 |     0,                                          /* tp_descr_set */ | 
 |     0,                                          /* tp_dictoffset */ | 
 |     s_init,                             /* tp_init */ | 
 |     PyType_GenericAlloc,/* tp_alloc */ | 
 |     s_new,                              /* tp_new */ | 
 |     PyObject_Del,               /* tp_free */ | 
 | }; | 
 |  | 
 |  | 
 | /* ---- Standalone functions  ---- */ | 
 |  | 
 | #define MAXCACHE 100 | 
 | static PyObject *cache = NULL; | 
 |  | 
 | static PyObject * | 
 | cache_struct(PyObject *fmt) | 
 | { | 
 |     PyObject * s_object; | 
 |  | 
 |     if (cache == NULL) { | 
 |         cache = PyDict_New(); | 
 |         if (cache == NULL) | 
 |             return NULL; | 
 |     } | 
 |  | 
 |     s_object = PyDict_GetItem(cache, fmt); | 
 |     if (s_object != NULL) { | 
 |         Py_INCREF(s_object); | 
 |         return s_object; | 
 |     } | 
 |  | 
 |     s_object = PyObject_CallFunctionObjArgs((PyObject *)(&PyStructType), fmt, NULL); | 
 |     if (s_object != NULL) { | 
 |         if (PyDict_Size(cache) >= MAXCACHE) | 
 |             PyDict_Clear(cache); | 
 |         /* Attempt to cache the result */ | 
 |         if (PyDict_SetItem(cache, fmt, s_object) == -1) | 
 |             PyErr_Clear(); | 
 |     } | 
 |     return s_object; | 
 | } | 
 |  | 
 | PyDoc_STRVAR(clearcache_doc, | 
 | "Clear the internal cache."); | 
 |  | 
 | static PyObject * | 
 | clearcache(PyObject *self) | 
 | { | 
 |     Py_CLEAR(cache); | 
 |     Py_RETURN_NONE; | 
 | } | 
 |  | 
 | PyDoc_STRVAR(calcsize_doc, | 
 | "Return size of C struct described by format string fmt."); | 
 |  | 
 | static PyObject * | 
 | calcsize(PyObject *self, PyObject *fmt) | 
 | { | 
 |     Py_ssize_t n; | 
 |     PyObject *s_object = cache_struct(fmt); | 
 |     if (s_object == NULL) | 
 |         return NULL; | 
 |     n = ((PyStructObject *)s_object)->s_size; | 
 |     Py_DECREF(s_object); | 
 |     return PyInt_FromSsize_t(n); | 
 | } | 
 |  | 
 | PyDoc_STRVAR(pack_doc, | 
 | "Return string containing values v1, v2, ... packed according to fmt."); | 
 |  | 
 | static PyObject * | 
 | pack(PyObject *self, PyObject *args) | 
 | { | 
 |     PyObject *s_object, *fmt, *newargs, *result; | 
 |     Py_ssize_t n = PyTuple_GET_SIZE(args); | 
 |  | 
 |     if (n == 0) { | 
 |         PyErr_SetString(PyExc_TypeError, "missing format argument"); | 
 |         return NULL; | 
 |     } | 
 |     fmt = PyTuple_GET_ITEM(args, 0); | 
 |     newargs = PyTuple_GetSlice(args, 1, n); | 
 |     if (newargs == NULL) | 
 |         return NULL; | 
 |  | 
 |     s_object = cache_struct(fmt); | 
 |     if (s_object == NULL) { | 
 |         Py_DECREF(newargs); | 
 |         return NULL; | 
 |     } | 
 |     result = s_pack(s_object, newargs); | 
 |     Py_DECREF(newargs); | 
 |     Py_DECREF(s_object); | 
 |     return result; | 
 | } | 
 |  | 
 | PyDoc_STRVAR(pack_into_doc, | 
 | "Pack the values v1, v2, ... according to fmt.\n\ | 
 | Write the packed bytes into the writable buffer buf starting at offset."); | 
 |  | 
 | static PyObject * | 
 | pack_into(PyObject *self, PyObject *args) | 
 | { | 
 |     PyObject *s_object, *fmt, *newargs, *result; | 
 |     Py_ssize_t n = PyTuple_GET_SIZE(args); | 
 |  | 
 |     if (n == 0) { | 
 |         PyErr_SetString(PyExc_TypeError, "missing format argument"); | 
 |         return NULL; | 
 |     } | 
 |     fmt = PyTuple_GET_ITEM(args, 0); | 
 |     newargs = PyTuple_GetSlice(args, 1, n); | 
 |     if (newargs == NULL) | 
 |         return NULL; | 
 |  | 
 |     s_object = cache_struct(fmt); | 
 |     if (s_object == NULL) { | 
 |         Py_DECREF(newargs); | 
 |         return NULL; | 
 |     } | 
 |     result = s_pack_into(s_object, newargs); | 
 |     Py_DECREF(newargs); | 
 |     Py_DECREF(s_object); | 
 |     return result; | 
 | } | 
 |  | 
 | PyDoc_STRVAR(unpack_doc, | 
 | "Unpack the string containing packed C structure data, according to fmt.\n\ | 
 | Requires len(string) == calcsize(fmt)."); | 
 |  | 
 | static PyObject * | 
 | unpack(PyObject *self, PyObject *args) | 
 | { | 
 |     PyObject *s_object, *fmt, *inputstr, *result; | 
 |  | 
 |     if (!PyArg_UnpackTuple(args, "unpack", 2, 2, &fmt, &inputstr)) | 
 |         return NULL; | 
 |  | 
 |     s_object = cache_struct(fmt); | 
 |     if (s_object == NULL) | 
 |         return NULL; | 
 |     result = s_unpack(s_object, inputstr); | 
 |     Py_DECREF(s_object); | 
 |     return result; | 
 | } | 
 |  | 
 | PyDoc_STRVAR(unpack_from_doc, | 
 | "Unpack the buffer, containing packed C structure data, according to\n\ | 
 | fmt, starting at offset. Requires len(buffer[offset:]) >= calcsize(fmt)."); | 
 |  | 
 | static PyObject * | 
 | unpack_from(PyObject *self, PyObject *args, PyObject *kwds) | 
 | { | 
 |     PyObject *s_object, *fmt, *newargs, *result; | 
 |     Py_ssize_t n = PyTuple_GET_SIZE(args); | 
 |  | 
 |     if (n == 0) { | 
 |         PyErr_SetString(PyExc_TypeError, "missing format argument"); | 
 |         return NULL; | 
 |     } | 
 |     fmt = PyTuple_GET_ITEM(args, 0); | 
 |     newargs = PyTuple_GetSlice(args, 1, n); | 
 |     if (newargs == NULL) | 
 |         return NULL; | 
 |  | 
 |     s_object = cache_struct(fmt); | 
 |     if (s_object == NULL) { | 
 |         Py_DECREF(newargs); | 
 |         return NULL; | 
 |     } | 
 |     result = s_unpack_from(s_object, newargs, kwds); | 
 |     Py_DECREF(newargs); | 
 |     Py_DECREF(s_object); | 
 |     return result; | 
 | } | 
 |  | 
 | static struct PyMethodDef module_functions[] = { | 
 |     {"_clearcache",     (PyCFunction)clearcache,        METH_NOARGS,    clearcache_doc}, | 
 |     {"calcsize",        calcsize,       METH_O, calcsize_doc}, | 
 |     {"pack",            pack,           METH_VARARGS,   pack_doc}, | 
 |     {"pack_into",       pack_into,      METH_VARARGS,   pack_into_doc}, | 
 |     {"unpack",          unpack, METH_VARARGS,   unpack_doc}, | 
 |     {"unpack_from",     (PyCFunction)unpack_from, | 
 |                     METH_VARARGS|METH_KEYWORDS,         unpack_from_doc}, | 
 |     {NULL,       NULL}          /* sentinel */ | 
 | }; | 
 |  | 
 |  | 
 | /* Module initialization */ | 
 |  | 
 | PyDoc_STRVAR(module_doc, | 
 | "Functions to convert between Python values and C structs represented\n\ | 
 | as Python strings. It uses format strings (explained below) as compact\n\ | 
 | descriptions of the lay-out of the C structs and the intended conversion\n\ | 
 | to/from Python values.\n\ | 
 | \n\ | 
 | The optional first format char indicates byte order, size and alignment:\n\ | 
 |   @: native order, size & alignment (default)\n\ | 
 |   =: native order, std. size & alignment\n\ | 
 |   <: little-endian, std. size & alignment\n\ | 
 |   >: big-endian, std. size & alignment\n\ | 
 |   !: same as >\n\ | 
 | \n\ | 
 | The remaining chars indicate types of args and must match exactly;\n\ | 
 | these can be preceded by a decimal repeat count:\n\ | 
 |   x: pad byte (no data); c:char; b:signed byte; B:unsigned byte;\n\ | 
 |   ?: _Bool (requires C99; if not available, char is used instead)\n\ | 
 |   h:short; H:unsigned short; i:int; I:unsigned int;\n\ | 
 |   l:long; L:unsigned long; f:float; d:double.\n\ | 
 | Special cases (preceding decimal count indicates length):\n\ | 
 |   s:string (array of char); p: pascal string (with count byte).\n\ | 
 | Special case (only available in native format):\n\ | 
 |   P:an integer type that is wide enough to hold a pointer.\n\ | 
 | Special case (not in native mode unless 'long long' in platform C):\n\ | 
 |   q:long long; Q:unsigned long long\n\ | 
 | Whitespace between formats is ignored.\n\ | 
 | \n\ | 
 | The variable struct.error is an exception raised on errors.\n"); | 
 |  | 
 | PyMODINIT_FUNC | 
 | init_struct(void) | 
 | { | 
 |     PyObject *ver, *m; | 
 |  | 
 |     ver = PyString_FromString("0.2"); | 
 |     if (ver == NULL) | 
 |         return; | 
 |  | 
 |     m = Py_InitModule3("_struct", module_functions, module_doc); | 
 |     if (m == NULL) | 
 |         return; | 
 |  | 
 |     Py_TYPE(&PyStructType) = &PyType_Type; | 
 |     if (PyType_Ready(&PyStructType) < 0) | 
 |         return; | 
 |  | 
 |     /* This speed trick can't be used until overflow masking goes | 
 |        away, because native endian always raises exceptions | 
 |        instead of overflow masking. */ | 
 |  | 
 |     /* Check endian and swap in faster functions */ | 
 |     { | 
 |         int one = 1; | 
 |         formatdef *native = native_table; | 
 |         formatdef *other, *ptr; | 
 |         if ((int)*(unsigned char*)&one) | 
 |             other = lilendian_table; | 
 |         else | 
 |             other = bigendian_table; | 
 |         /* Scan through the native table, find a matching | 
 |            entry in the endian table and swap in the | 
 |            native implementations whenever possible | 
 |            (64-bit platforms may not have "standard" sizes) */ | 
 |         while (native->format != '\0' && other->format != '\0') { | 
 |             ptr = other; | 
 |             while (ptr->format != '\0') { | 
 |                 if (ptr->format == native->format) { | 
 |                     /* Match faster when formats are | 
 |                        listed in the same order */ | 
 |                     if (ptr == other) | 
 |                         other++; | 
 |                     /* Only use the trick if the | 
 |                        size matches */ | 
 |                     if (ptr->size != native->size) | 
 |                         break; | 
 |                     /* Skip float and double, could be | 
 |                        "unknown" float format */ | 
 |                     if (ptr->format == 'd' || ptr->format == 'f') | 
 |                         break; | 
 |                     ptr->pack = native->pack; | 
 |                     ptr->unpack = native->unpack; | 
 |                     break; | 
 |                 } | 
 |                 ptr++; | 
 |             } | 
 |             native++; | 
 |         } | 
 |     } | 
 |  | 
 |     /* Add some symbolic constants to the module */ | 
 |     if (StructError == NULL) { | 
 |         StructError = PyErr_NewException("struct.error", NULL, NULL); | 
 |         if (StructError == NULL) | 
 |             return; | 
 |     } | 
 |  | 
 |     Py_INCREF(StructError); | 
 |     PyModule_AddObject(m, "error", StructError); | 
 |  | 
 |     Py_INCREF((PyObject*)&PyStructType); | 
 |     PyModule_AddObject(m, "Struct", (PyObject*)&PyStructType); | 
 |  | 
 |     PyModule_AddObject(m, "__version__", ver); | 
 |  | 
 |     PyModule_AddIntConstant(m, "_PY_STRUCT_RANGE_CHECKING", 1); | 
 |     PyModule_AddIntConstant(m, "_PY_STRUCT_FLOAT_COERCE", 1); | 
 | } |