Doc/lib/libunittest.tex

\section{\module{unittest} ---
         Unit testing framework}

\declaremodule{standard}{unittest}
\moduleauthor{Steve Purcell}{stephen\textunderscore{}purcell@yahoo.com}
\sectionauthor{Steve Purcell}{stephen\textunderscore{}purcell@yahoo.com}
\sectionauthor{Fred L. Drake, Jr.}{fdrake@acm.org}


The Python unit testing framework, often referred to as ``PyUnit,'' is
a Python language version of JUnit, by Kent Beck and Erich Gamma.
JUnit is, in turn, a Java version of Kent's Smalltalk testing
framework.  Each is the de facto standard unit testing framework for
its respective language.

PyUnit supports test automation, sharing of setup and shutdown code
for tests, aggregation of tests into collections, and independence of
the tests from the reporting framework.  The \module{unittest} module
provides classes that make it easy to support these qualities for a
set of tests.

To achieve this, PyUnit supports three major concepts:

\begin{definitions}
\term{test case}
A \dfn{test case} is the smallest unit of testing.  It checks for a
specific response to a particular set of inputs.  PyUnit provides a
base class, \class{TestCase}, which may be used to create new test
cases.

\term{test suite}
A \dfn{test suite} is a collection of test cases, test suites, or
both.  It is used to aggregate tests that should be executed
together.

\term{test runner}
A \dfn{test runner} is a component which orchestrates the execution of
tests and provides the outcome to the user.  The runner may use a
graphical interface, a textual interface, or return a special value to
indicate the results of executing the tests.
\end{definitions}



\begin{seealso}
  \seetitle[http://pyunit.sourceforge.net/]{PyUnit Web Site}{The
            source for further information on PyUnit.}
  \seetitle[http://www.XProgramming.com/testfram.htm]{Simple Smalltalk
            Testing: With Patterns}{Kent Beck's original paper on
            testing frameworks using the pattern shared by
            \module{unittest}.}
\end{seealso}


\subsection{Mapping concepts to classes
            \label{test-concept-classes}}


\subsection{Organizing test code
            \label{organizing-tests}}


\subsection{Re-using old test code
            \label{legacy-unit-tests}}

Some users will find that they have existing test code that they would
like to run from PyUnit, without converting every old test function to
a \class{TestCase} subclass.

For this reason, PyUnit provides a \class{FunctionTestCase} class.
This subclass of \class{TestCase} can be used to wrap an existing test
function.  Set-up and tear-down functions can also optionally be
wrapped.

Given the following test function:

\begin{verbatim}
def testSomething():
    something = makeSomething()
    assert something.name is not None
    # ...
\end{verbatim}

one can create an equivalent test case instance as follows:

\begin{verbatim}
testcase = unittest.FunctionTestCase(testSomething)
\end{verbatim}

If there are additional set-up and tear-down methods that should be
called as part of the test case's operation, they can also be provided:

\begin{verbatim}
testcase = unittest.FunctionTestCase(testSomething,
                                     setUp=makeSomethingDB,
                                     tearDown=deleteSomethingDB)
\end{verbatim}


\subsection{Classes and functions
            \label{unittest-contents}}

\begin{classdesc}{TestCase}{}
  Instances of the \class{TestCase} class represent the smallest
  testable units in a set of tests.  This class is intended to be used
  as a base class, with specific tests being implemented by concrete
  subclasses.  This class implements the interface needed by the test
  runner to allow it to drive the test, and methods that the test code
  can use to check for and report various kinds of failures.
\end{classdesc}

\begin{classdesc}{FunctionTestCase}{testFunc\optional{,
                  setup\optional{, tearDown\optional{, description}}}}
  This class implements the portion of the \class{TestCase} interface
  which allows the test runner to drive the test, but does not provide
  the methods which test code can use to check and report errors.
  This is used to create test cases using legacy test code, allowing
  it to be integrated into a \refmodule{unittest}-based test
  framework.
\end{classdesc}

\begin{classdesc}{TestSuite}{}
  This class represents an aggregation of individual tests cases and
  test suites.  The class presents the interface needed by the test
  runner to allow it to be run as any other test case, but all the
  contained tests and test suites are executed.  Additional methods
  are provided to add test cases and suites to the aggregation.
\end{classdesc}

\begin{classdesc}{TestLoader}{}
\end{classdesc}

\begin{classdesc}{TextTestRunner}{\optional{stream\optional{,
                  descriptions\optional{, verbosity}}}}
\end{classdesc}

\begin{funcdesc}{main}{\optional{module\optional{,
                 defaultTest\optional{, argv\optional{,
                 testRunner\optional{, testRunner}}}}}}
A command-line program that runs a set of tests; this is primarily
for making test modules conveniently executable.  The simplest use for
this function is:

\begin{verbatim}
if __name__ == '__main__':
    unittest.main()
\end{verbatim}
\end{funcdesc}


\subsection{TestCase Objects
            \label{testcase-objects}}


\subsection{TestSuite Objects
            \label{testsuite-objects}}

\class{TestSuite} objects behave much like \class{TestCase} objects,
except they do not actually implement a test.  Instead, they are used
to aggregate tests into groups that should be run together.  Some
additional methods are available to add tests to \class{TestSuite}
instances:

\begin{methoddesc}[TestSuite]{addTest}{test}
  Add a \class{TestCase} or \class{TestSuite} to the set of tests that
  make up the suite.
\end{methoddesc}

\begin{methoddesc}[TestSuite]{addTests}{tests}
  Add all the tests from a sequence of \class{TestCase} and
  \class{TestSuite} instances to this test suite.
\end{methoddesc}


\subsection{TestResult Objects
            \label{testresult-objects}}

A \class{TestResult} object stores the results of a set of tests.  The
\class{TestCase} and \class{TestSuite} classes ensure that results are
properly stored; test authors do not need to worry about recording the
outcome of tests.

Testing frameworks built on top of \refmodule{unittest} may want
access to the \class{TestResult} object generated by running a set of
tests for reporting purposes; a \class{TestResult} instance is
returned by the \method{TestRunner.run()} method for this purpose.

Each instance holds the total number of tests run, and collections of
failures and errors that occurred among those test runs.  The
collections contain tuples of \code{(\var{testcase},
\var{exceptioninfo})}, where \var{exceptioninfo} is a tuple as
returned by \function{sys.exc_info()}.

\class{TestResult} instances have the following attributes that will
be of interest when inspecting the results of running a set of tests:

\begin{memberdesc}[TestResult]{errors}
  A list containing pairs of \class{TestCase} instances and the
  \function{sys.exc_info()} results for tests which raised exceptions
  other than \exception{AssertionError}.
\end{memberdesc}

\begin{memberdesc}[TestResult]{failures}
  A list containing pairs of \class{TestCase} instances and the
  \function{sys.exc_info()} results for tests which raised the
  \exception{AssertionError} exception.
\end{memberdesc}

\begin{memberdesc}[TestResult]{testsRun}
  The number of tests which have been started.
\end{memberdesc}

\begin{methoddesc}[TestResult]{wasSuccessful}{}
  Returns true if all tests run so far have passed, otherwise returns
  false.
\end{methoddesc}


The following methods of the \class{TestResult} class are used to
maintain the internal data structures, and mmay be extended in
subclasses to support additional reporting requirements.  This is
particularly useful in building GUI tools which support interactive
reporting while tests are being run.

\begin{methoddesc}[TestResult]{startTest}{test}
  Called when the test case \var{test} is about to be run.
\end{methoddesc}

\begin{methoddesc}[TestResult]{stopTest}{test}
  Called when the test case \var{test} has been executed, regardless
  of the outcome.
\end{methoddesc}

\begin{methoddesc}[TestResult]{addError}{test, err}
  Called when the test case \var{test} results in an exception other
  than \exception{AssertionError}.  \var{err} is a tuple of the form
  returned by \function{sys.exc_info()}:  \code{(\var{type},
  \var{value}, \var{traceback})}.
\end{methoddesc}

\begin{methoddesc}[TestResult]{addFailure}{test, err}
  Called when the test case \var{test} results in an
  \exception{AssertionError} exception; the assumption is that the
  test raised the \exception{AssertionError} and not the
  implementation being tested.  \var{err} is a tuple of the form
  returned by \function{sys.exc_info()}:  \code{(\var{type},
  \var{value}, \var{traceback})}.
\end{methoddesc}

\begin{methoddesc}[TestResult]{addSuccess}{test}
  This method is called for a test that does not fail; \var{test} is
  the test case object.
\end{methoddesc}


One additional method is available for \class{TestResult} objects:

\begin{methoddesc}[TestResult]{stop}{}
  This method can be called to signal that the set of tests being run
  should be aborted.  Once this has been called, the
  \class{TestRunner} object return to its caller without running any
  additional tests.  This is used by the \class{TextTestRunner} class
  to stop the test framework when the user signals an interrupt from
  the keyboard.  GUI tools which provide runners can use this in a
  similar manner.
\end{methoddesc}