Martin v. Löwis | d372aa8 | 2006-01-03 06:44:59 +0000 | [diff] [blame^] | 1 | /* |
| 2 | * gzlog.c |
| 3 | * Copyright (C) 2004 Mark Adler |
| 4 | * For conditions of distribution and use, see copyright notice in gzlog.h |
| 5 | * version 1.0, 26 Nov 2004 |
| 6 | * |
| 7 | */ |
| 8 | |
| 9 | #include <string.h> /* memcmp() */ |
| 10 | #include <stdlib.h> /* malloc(), free(), NULL */ |
| 11 | #include <sys/types.h> /* size_t, off_t */ |
| 12 | #include <unistd.h> /* read(), close(), sleep(), ftruncate(), */ |
| 13 | /* lseek() */ |
| 14 | #include <fcntl.h> /* open() */ |
| 15 | #include <sys/file.h> /* flock() */ |
| 16 | #include "zlib.h" /* deflateInit2(), deflate(), deflateEnd() */ |
| 17 | |
| 18 | #include "gzlog.h" /* interface */ |
| 19 | #define local static |
| 20 | |
| 21 | /* log object structure */ |
| 22 | typedef struct { |
| 23 | int id; /* object identifier */ |
| 24 | int fd; /* log file descriptor */ |
| 25 | off_t extra; /* offset of extra "ap" subfield */ |
| 26 | off_t mark_off; /* offset of marked data */ |
| 27 | off_t last_off; /* offset of last block */ |
| 28 | unsigned long crc; /* uncompressed crc */ |
| 29 | unsigned long len; /* uncompressed length (modulo 2^32) */ |
| 30 | unsigned stored; /* length of current stored block */ |
| 31 | } gz_log; |
| 32 | |
| 33 | #define GZLOGID 19334 /* gz_log object identifier */ |
| 34 | |
| 35 | #define LOCK_RETRY 1 /* retry lock once a second */ |
| 36 | #define LOCK_PATIENCE 1200 /* try about twenty minutes before forcing */ |
| 37 | |
| 38 | /* acquire a lock on a file */ |
| 39 | local int lock(int fd) |
| 40 | { |
| 41 | int patience; |
| 42 | |
| 43 | /* try to lock every LOCK_RETRY seconds for LOCK_PATIENCE seconds */ |
| 44 | patience = LOCK_PATIENCE; |
| 45 | do { |
| 46 | if (flock(fd, LOCK_EX + LOCK_NB) == 0) |
| 47 | return 0; |
| 48 | (void)sleep(LOCK_RETRY); |
| 49 | patience -= LOCK_RETRY; |
| 50 | } while (patience > 0); |
| 51 | |
| 52 | /* we've run out of patience -- give up */ |
| 53 | return -1; |
| 54 | } |
| 55 | |
| 56 | /* release lock */ |
| 57 | local void unlock(int fd) |
| 58 | { |
| 59 | (void)flock(fd, LOCK_UN); |
| 60 | } |
| 61 | |
| 62 | /* release a log object */ |
| 63 | local void log_clean(gz_log *log) |
| 64 | { |
| 65 | unlock(log->fd); |
| 66 | (void)close(log->fd); |
| 67 | free(log); |
| 68 | } |
| 69 | |
| 70 | /* read an unsigned long from a byte buffer little-endian */ |
| 71 | local unsigned long make_ulg(unsigned char *buf) |
| 72 | { |
| 73 | int n; |
| 74 | unsigned long val; |
| 75 | |
| 76 | val = (unsigned long)(*buf++); |
| 77 | for (n = 8; n < 32; n += 8) |
| 78 | val += (unsigned long)(*buf++) << n; |
| 79 | return val; |
| 80 | } |
| 81 | |
| 82 | /* read an off_t from a byte buffer little-endian */ |
| 83 | local off_t make_off(unsigned char *buf) |
| 84 | { |
| 85 | int n; |
| 86 | off_t val; |
| 87 | |
| 88 | val = (off_t)(*buf++); |
| 89 | for (n = 8; n < 64; n += 8) |
| 90 | val += (off_t)(*buf++) << n; |
| 91 | return val; |
| 92 | } |
| 93 | |
| 94 | /* write an unsigned long little-endian to byte buffer */ |
| 95 | local void dice_ulg(unsigned long val, unsigned char *buf) |
| 96 | { |
| 97 | int n; |
| 98 | |
| 99 | for (n = 0; n < 4; n++) { |
| 100 | *buf++ = val & 0xff; |
| 101 | val >>= 8; |
| 102 | } |
| 103 | } |
| 104 | |
| 105 | /* write an off_t little-endian to byte buffer */ |
| 106 | local void dice_off(off_t val, unsigned char *buf) |
| 107 | { |
| 108 | int n; |
| 109 | |
| 110 | for (n = 0; n < 8; n++) { |
| 111 | *buf++ = val & 0xff; |
| 112 | val >>= 8; |
| 113 | } |
| 114 | } |
| 115 | |
| 116 | /* initial, empty gzip file for appending */ |
| 117 | local char empty_gz[] = { |
| 118 | 0x1f, 0x8b, /* magic gzip id */ |
| 119 | 8, /* compression method is deflate */ |
| 120 | 4, /* there is an extra field */ |
| 121 | 0, 0, 0, 0, /* no modification time provided */ |
| 122 | 0, 0xff, /* no extra flags, no OS */ |
| 123 | 20, 0, 'a', 'p', 16, 0, /* extra field with "ap" subfield */ |
| 124 | 32, 0, 0, 0, 0, 0, 0, 0, /* offset of uncompressed data */ |
| 125 | 32, 0, 0, 0, 0, 0, 0, 0, /* offset of last block */ |
| 126 | 1, 0, 0, 0xff, 0xff, /* empty stored block (last) */ |
| 127 | 0, 0, 0, 0, /* crc */ |
| 128 | 0, 0, 0, 0 /* uncompressed length */ |
| 129 | }; |
| 130 | |
| 131 | /* initialize a log object with locking */ |
| 132 | void *gzlog_open(char *path) |
| 133 | { |
| 134 | unsigned xlen; |
| 135 | unsigned char temp[20]; |
| 136 | unsigned sub_len; |
| 137 | int good; |
| 138 | gz_log *log; |
| 139 | |
| 140 | /* allocate log structure */ |
| 141 | log = malloc(sizeof(gz_log)); |
| 142 | if (log == NULL) |
| 143 | return NULL; |
| 144 | log->id = GZLOGID; |
| 145 | |
| 146 | /* open file, creating it if necessary, and locking it */ |
| 147 | log->fd = open(path, O_RDWR | O_CREAT, 0600); |
| 148 | if (log->fd < 0) { |
| 149 | free(log); |
| 150 | return NULL; |
| 151 | } |
| 152 | if (lock(log->fd)) { |
| 153 | close(log->fd); |
| 154 | free(log); |
| 155 | return NULL; |
| 156 | } |
| 157 | |
| 158 | /* if file is empty, write new gzip stream */ |
| 159 | if (lseek(log->fd, 0, SEEK_END) == 0) { |
| 160 | if (write(log->fd, empty_gz, sizeof(empty_gz)) != sizeof(empty_gz)) { |
| 161 | log_clean(log); |
| 162 | return NULL; |
| 163 | } |
| 164 | } |
| 165 | |
| 166 | /* check gzip header */ |
| 167 | (void)lseek(log->fd, 0, SEEK_SET); |
| 168 | if (read(log->fd, temp, 12) != 12 || temp[0] != 0x1f || |
| 169 | temp[1] != 0x8b || temp[2] != 8 || (temp[3] & 4) == 0) { |
| 170 | log_clean(log); |
| 171 | return NULL; |
| 172 | } |
| 173 | |
| 174 | /* process extra field to find "ap" sub-field */ |
| 175 | xlen = temp[10] + (temp[11] << 8); |
| 176 | good = 0; |
| 177 | while (xlen) { |
| 178 | if (xlen < 4 || read(log->fd, temp, 4) != 4) |
| 179 | break; |
| 180 | sub_len = temp[2]; |
| 181 | sub_len += temp[3] << 8; |
| 182 | xlen -= 4; |
| 183 | if (memcmp(temp, "ap", 2) == 0 && sub_len == 16) { |
| 184 | good = 1; |
| 185 | break; |
| 186 | } |
| 187 | if (xlen < sub_len) |
| 188 | break; |
| 189 | (void)lseek(log->fd, sub_len, SEEK_CUR); |
| 190 | xlen -= sub_len; |
| 191 | } |
| 192 | if (!good) { |
| 193 | log_clean(log); |
| 194 | return NULL; |
| 195 | } |
| 196 | |
| 197 | /* read in "ap" sub-field */ |
| 198 | log->extra = lseek(log->fd, 0, SEEK_CUR); |
| 199 | if (read(log->fd, temp, 16) != 16) { |
| 200 | log_clean(log); |
| 201 | return NULL; |
| 202 | } |
| 203 | log->mark_off = make_off(temp); |
| 204 | log->last_off = make_off(temp + 8); |
| 205 | |
| 206 | /* get crc, length of gzip file */ |
| 207 | (void)lseek(log->fd, log->last_off, SEEK_SET); |
| 208 | if (read(log->fd, temp, 13) != 13 || |
| 209 | memcmp(temp, "\001\000\000\377\377", 5) != 0) { |
| 210 | log_clean(log); |
| 211 | return NULL; |
| 212 | } |
| 213 | log->crc = make_ulg(temp + 5); |
| 214 | log->len = make_ulg(temp + 9); |
| 215 | |
| 216 | /* set up to write over empty last block */ |
| 217 | (void)lseek(log->fd, log->last_off + 5, SEEK_SET); |
| 218 | log->stored = 0; |
| 219 | return (void *)log; |
| 220 | } |
| 221 | |
| 222 | /* maximum amount to put in a stored block before starting a new one */ |
| 223 | #define MAX_BLOCK 16384 |
| 224 | |
| 225 | /* write a block to a log object */ |
| 226 | int gzlog_write(void *obj, char *data, size_t len) |
| 227 | { |
| 228 | size_t some; |
| 229 | unsigned char temp[5]; |
| 230 | gz_log *log; |
| 231 | |
| 232 | /* check object */ |
| 233 | log = (gz_log *)obj; |
| 234 | if (log == NULL || log->id != GZLOGID) |
| 235 | return 1; |
| 236 | |
| 237 | /* write stored blocks until all of the input is written */ |
| 238 | do { |
| 239 | some = MAX_BLOCK - log->stored; |
| 240 | if (some > len) |
| 241 | some = len; |
| 242 | if (write(log->fd, data, some) != some) |
| 243 | return 1; |
| 244 | log->crc = crc32(log->crc, data, some); |
| 245 | log->len += some; |
| 246 | len -= some; |
| 247 | data += some; |
| 248 | log->stored += some; |
| 249 | |
| 250 | /* if the stored block is full, end it and start another */ |
| 251 | if (log->stored == MAX_BLOCK) { |
| 252 | (void)lseek(log->fd, log->last_off, SEEK_SET); |
| 253 | temp[0] = 0; |
| 254 | dice_ulg(log->stored + ((unsigned long)(~log->stored) << 16), |
| 255 | temp + 1); |
| 256 | if (write(log->fd, temp, 5) != 5) |
| 257 | return 1; |
| 258 | log->last_off = lseek(log->fd, log->stored, SEEK_CUR); |
| 259 | (void)lseek(log->fd, 5, SEEK_CUR); |
| 260 | log->stored = 0; |
| 261 | } |
| 262 | } while (len); |
| 263 | return 0; |
| 264 | } |
| 265 | |
| 266 | /* recompress the remaining stored deflate data in place */ |
| 267 | local int recomp(gz_log *log) |
| 268 | { |
| 269 | z_stream strm; |
| 270 | size_t len, max; |
| 271 | unsigned char *in; |
| 272 | unsigned char *out; |
| 273 | unsigned char temp[16]; |
| 274 | |
| 275 | /* allocate space and read it all in (it's around 1 MB) */ |
| 276 | len = log->last_off - log->mark_off; |
| 277 | max = len + (len >> 12) + (len >> 14) + 11; |
| 278 | out = malloc(max); |
| 279 | if (out == NULL) |
| 280 | return 1; |
| 281 | in = malloc(len); |
| 282 | if (in == NULL) { |
| 283 | free(out); |
| 284 | return 1; |
| 285 | } |
| 286 | (void)lseek(log->fd, log->mark_off, SEEK_SET); |
| 287 | if (read(log->fd, in, len) != len) { |
| 288 | free(in); |
| 289 | free(out); |
| 290 | return 1; |
| 291 | } |
| 292 | |
| 293 | /* recompress in memory, decoding stored data as we go */ |
| 294 | /* note: this assumes that unsigned is four bytes or more */ |
| 295 | /* consider not making that assumption */ |
| 296 | strm.zalloc = Z_NULL; |
| 297 | strm.zfree = Z_NULL; |
| 298 | strm.opaque = Z_NULL; |
| 299 | if (deflateInit2(&strm, Z_BEST_COMPRESSION, Z_DEFLATED, -15, 8, |
| 300 | Z_DEFAULT_STRATEGY) != Z_OK) { |
| 301 | free(in); |
| 302 | free(out); |
| 303 | return 1; |
| 304 | } |
| 305 | strm.next_in = in; |
| 306 | strm.avail_out = max; |
| 307 | strm.next_out = out; |
| 308 | while (len >= 5) { |
| 309 | if (strm.next_in[0] != 0) |
| 310 | break; |
| 311 | strm.avail_in = strm.next_in[1] + (strm.next_in[2] << 8); |
| 312 | strm.next_in += 5; |
| 313 | len -= 5; |
| 314 | if (strm.avail_in != 0) { |
| 315 | if (len < strm.avail_in) |
| 316 | break; |
| 317 | len -= strm.avail_in; |
| 318 | (void)deflate(&strm, Z_NO_FLUSH); |
| 319 | if (strm.avail_in != 0 || strm.avail_out == 0) |
| 320 | break; |
| 321 | } |
| 322 | } |
| 323 | (void)deflate(&strm, Z_SYNC_FLUSH); |
| 324 | (void)deflateEnd(&strm); |
| 325 | free(in); |
| 326 | if (len != 0 || strm.avail_out == 0) { |
| 327 | free(out); |
| 328 | return 1; |
| 329 | } |
| 330 | |
| 331 | /* overwrite stored data with compressed data */ |
| 332 | (void)lseek(log->fd, log->mark_off, SEEK_SET); |
| 333 | len = max - strm.avail_out; |
| 334 | if (write(log->fd, out, len) != len) { |
| 335 | free(out); |
| 336 | return 1; |
| 337 | } |
| 338 | free(out); |
| 339 | |
| 340 | /* write last empty block, crc, and length */ |
| 341 | log->mark_off = log->last_off = lseek(log->fd, 0, SEEK_CUR); |
| 342 | temp[0] = 1; |
| 343 | dice_ulg(0xffffL << 16, temp + 1); |
| 344 | dice_ulg(log->crc, temp + 5); |
| 345 | dice_ulg(log->len, temp + 9); |
| 346 | if (write(log->fd, temp, 13) != 13) |
| 347 | return 1; |
| 348 | |
| 349 | /* truncate file to discard remaining stored data and old trailer */ |
| 350 | ftruncate(log->fd, lseek(log->fd, 0, SEEK_CUR)); |
| 351 | |
| 352 | /* update extra field to point to new last empty block */ |
| 353 | (void)lseek(log->fd, log->extra, SEEK_SET); |
| 354 | dice_off(log->mark_off, temp); |
| 355 | dice_off(log->last_off, temp + 8); |
| 356 | if (write(log->fd, temp, 16) != 16) |
| 357 | return 1; |
| 358 | return 0; |
| 359 | } |
| 360 | |
| 361 | /* maximum accumulation of stored blocks before compressing */ |
| 362 | #define MAX_STORED 1048576 |
| 363 | |
| 364 | /* close log object */ |
| 365 | int gzlog_close(void *obj) |
| 366 | { |
| 367 | unsigned char temp[8]; |
| 368 | gz_log *log; |
| 369 | |
| 370 | /* check object */ |
| 371 | log = (gz_log *)obj; |
| 372 | if (log == NULL || log->id != GZLOGID) |
| 373 | return 1; |
| 374 | |
| 375 | /* go to start of most recent block being written */ |
| 376 | (void)lseek(log->fd, log->last_off, SEEK_SET); |
| 377 | |
| 378 | /* if some stuff was put there, update block */ |
| 379 | if (log->stored) { |
| 380 | temp[0] = 0; |
| 381 | dice_ulg(log->stored + ((unsigned long)(~log->stored) << 16), |
| 382 | temp + 1); |
| 383 | if (write(log->fd, temp, 5) != 5) |
| 384 | return 1; |
| 385 | log->last_off = lseek(log->fd, log->stored, SEEK_CUR); |
| 386 | } |
| 387 | |
| 388 | /* write last block (empty) */ |
| 389 | if (write(log->fd, "\001\000\000\377\377", 5) != 5) |
| 390 | return 1; |
| 391 | |
| 392 | /* write updated crc and uncompressed length */ |
| 393 | dice_ulg(log->crc, temp); |
| 394 | dice_ulg(log->len, temp + 4); |
| 395 | if (write(log->fd, temp, 8) != 8) |
| 396 | return 1; |
| 397 | |
| 398 | /* put offset of that last block in gzip extra block */ |
| 399 | (void)lseek(log->fd, log->extra + 8, SEEK_SET); |
| 400 | dice_off(log->last_off, temp); |
| 401 | if (write(log->fd, temp, 8) != 8) |
| 402 | return 1; |
| 403 | |
| 404 | /* if more than 1 MB stored, then time to compress it */ |
| 405 | if (log->last_off - log->mark_off > MAX_STORED) { |
| 406 | if (recomp(log)) |
| 407 | return 1; |
| 408 | } |
| 409 | |
| 410 | /* unlock and close file */ |
| 411 | log_clean(log); |
| 412 | return 0; |
| 413 | } |