| #! /usr/bin/env python |
| |
| # Original code by Guido van Rossum; extensive changes by Sam Bayer, |
| # including code to check URL fragments. |
| |
| """Web tree checker. |
| |
| This utility is handy to check a subweb of the world-wide web for |
| errors. A subweb is specified by giving one or more ``root URLs''; a |
| page belongs to the subweb if one of the root URLs is an initial |
| prefix of it. |
| |
| File URL extension: |
| |
| In order to easy the checking of subwebs via the local file system, |
| the interpretation of ``file:'' URLs is extended to mimic the behavior |
| of your average HTTP daemon: if a directory pathname is given, the |
| file index.html in that directory is returned if it exists, otherwise |
| a directory listing is returned. Now, you can point webchecker to the |
| document tree in the local file system of your HTTP daemon, and have |
| most of it checked. In fact the default works this way if your local |
| web tree is located at /usr/local/etc/httpd/htdpcs (the default for |
| the NCSA HTTP daemon and probably others). |
| |
| Report printed: |
| |
| When done, it reports pages with bad links within the subweb. When |
| interrupted, it reports for the pages that it has checked already. |
| |
| In verbose mode, additional messages are printed during the |
| information gathering phase. By default, it prints a summary of its |
| work status every 50 URLs (adjustable with the -r option), and it |
| reports errors as they are encountered. Use the -q option to disable |
| this output. |
| |
| Checkpoint feature: |
| |
| Whether interrupted or not, it dumps its state (a Python pickle) to a |
| checkpoint file and the -R option allows it to restart from the |
| checkpoint (assuming that the pages on the subweb that were already |
| processed haven't changed). Even when it has run till completion, -R |
| can still be useful -- it will print the reports again, and -Rq prints |
| the errors only. In this case, the checkpoint file is not written |
| again. The checkpoint file can be set with the -d option. |
| |
| The checkpoint file is written as a Python pickle. Remember that |
| Python's pickle module is currently quite slow. Give it the time it |
| needs to load and save the checkpoint file. When interrupted while |
| writing the checkpoint file, the old checkpoint file is not |
| overwritten, but all work done in the current run is lost. |
| |
| Miscellaneous: |
| |
| - You may find the (Tk-based) GUI version easier to use. See wcgui.py. |
| |
| - Webchecker honors the "robots.txt" convention. Thanks to Skip |
| Montanaro for his robotparser.py module (included in this directory)! |
| The agent name is hardwired to "webchecker". URLs that are disallowed |
| by the robots.txt file are reported as external URLs. |
| |
| - Because the SGML parser is a bit slow, very large SGML files are |
| skipped. The size limit can be set with the -m option. |
| |
| - When the server or protocol does not tell us a file's type, we guess |
| it based on the URL's suffix. The mimetypes.py module (also in this |
| directory) has a built-in table mapping most currently known suffixes, |
| and in addition attempts to read the mime.types configuration files in |
| the default locations of Netscape and the NCSA HTTP daemon. |
| |
| - We follow links indicated by <A>, <FRAME> and <IMG> tags. We also |
| honor the <BASE> tag. |
| |
| - We now check internal NAME anchor links, as well as toplevel links. |
| |
| - Checking external links is now done by default; use -x to *disable* |
| this feature. External links are now checked during normal |
| processing. (XXX The status of a checked link could be categorized |
| better. Later...) |
| |
| - If external links are not checked, you can use the -t flag to |
| provide specific overrides to -x. |
| |
| Usage: webchecker.py [option] ... [rooturl] ... |
| |
| Options: |
| |
| -R -- restart from checkpoint file |
| -d file -- checkpoint filename (default %(DUMPFILE)s) |
| -m bytes -- skip HTML pages larger than this size (default %(MAXPAGE)d) |
| -n -- reports only, no checking (use with -R) |
| -q -- quiet operation (also suppresses external links report) |
| -r number -- number of links processed per round (default %(ROUNDSIZE)d) |
| -t root -- specify root dir which should be treated as internal (can repeat) |
| -v -- verbose operation; repeating -v will increase verbosity |
| -x -- don't check external links (these are often slow to check) |
| -a -- don't check name anchors |
| |
| Arguments: |
| |
| rooturl -- URL to start checking |
| (default %(DEFROOT)s) |
| |
| """ |
| |
| |
| __version__ = "$Revision$" |
| |
| |
| import sys |
| import os |
| from types import * |
| import io |
| import getopt |
| import pickle |
| |
| import urllib |
| import urlparse |
| import sgmllib |
| import cgi |
| |
| import mimetypes |
| import robotparser |
| |
| # Extract real version number if necessary |
| if __version__[0] == '$': |
| _v = __version__.split() |
| if len(_v) == 3: |
| __version__ = _v[1] |
| |
| |
| # Tunable parameters |
| DEFROOT = "file:/usr/local/etc/httpd/htdocs/" # Default root URL |
| CHECKEXT = 1 # Check external references (1 deep) |
| VERBOSE = 1 # Verbosity level (0-3) |
| MAXPAGE = 150000 # Ignore files bigger than this |
| ROUNDSIZE = 50 # Number of links processed per round |
| DUMPFILE = "@webchecker.pickle" # Pickled checkpoint |
| AGENTNAME = "webchecker" # Agent name for robots.txt parser |
| NONAMES = 0 # Force name anchor checking |
| |
| |
| # Global variables |
| |
| |
| def main(): |
| checkext = CHECKEXT |
| verbose = VERBOSE |
| maxpage = MAXPAGE |
| roundsize = ROUNDSIZE |
| dumpfile = DUMPFILE |
| restart = 0 |
| norun = 0 |
| |
| try: |
| opts, args = getopt.getopt(sys.argv[1:], 'Rd:m:nqr:t:vxa') |
| except getopt.error as msg: |
| sys.stdout = sys.stderr |
| print(msg) |
| print(__doc__%globals()) |
| sys.exit(2) |
| |
| # The extra_roots variable collects extra roots. |
| extra_roots = [] |
| nonames = NONAMES |
| |
| for o, a in opts: |
| if o == '-R': |
| restart = 1 |
| if o == '-d': |
| dumpfile = a |
| if o == '-m': |
| maxpage = int(a) |
| if o == '-n': |
| norun = 1 |
| if o == '-q': |
| verbose = 0 |
| if o == '-r': |
| roundsize = int(a) |
| if o == '-t': |
| extra_roots.append(a) |
| if o == '-a': |
| nonames = not nonames |
| if o == '-v': |
| verbose = verbose + 1 |
| if o == '-x': |
| checkext = not checkext |
| |
| if verbose > 0: |
| print(AGENTNAME, "version", __version__) |
| |
| if restart: |
| c = load_pickle(dumpfile=dumpfile, verbose=verbose) |
| else: |
| c = Checker() |
| |
| c.setflags(checkext=checkext, verbose=verbose, |
| maxpage=maxpage, roundsize=roundsize, |
| nonames=nonames |
| ) |
| |
| if not restart and not args: |
| args.append(DEFROOT) |
| |
| for arg in args: |
| c.addroot(arg) |
| |
| # The -t flag is only needed if external links are not to be |
| # checked. So -t values are ignored unless -x was specified. |
| if not checkext: |
| for root in extra_roots: |
| # Make sure it's terminated by a slash, |
| # so that addroot doesn't discard the last |
| # directory component. |
| if root[-1] != "/": |
| root = root + "/" |
| c.addroot(root, add_to_do = 0) |
| |
| try: |
| |
| if not norun: |
| try: |
| c.run() |
| except KeyboardInterrupt: |
| if verbose > 0: |
| print("[run interrupted]") |
| |
| try: |
| c.report() |
| except KeyboardInterrupt: |
| if verbose > 0: |
| print("[report interrupted]") |
| |
| finally: |
| if c.save_pickle(dumpfile): |
| if dumpfile == DUMPFILE: |
| print("Use ``%s -R'' to restart." % sys.argv[0]) |
| else: |
| print("Use ``%s -R -d %s'' to restart." % (sys.argv[0], |
| dumpfile)) |
| |
| |
| def load_pickle(dumpfile=DUMPFILE, verbose=VERBOSE): |
| if verbose > 0: |
| print("Loading checkpoint from %s ..." % dumpfile) |
| f = open(dumpfile, "rb") |
| c = pickle.load(f) |
| f.close() |
| if verbose > 0: |
| print("Done.") |
| print("Root:", "\n ".join(c.roots)) |
| return c |
| |
| |
| class Checker: |
| |
| checkext = CHECKEXT |
| verbose = VERBOSE |
| maxpage = MAXPAGE |
| roundsize = ROUNDSIZE |
| nonames = NONAMES |
| |
| validflags = tuple(dir()) |
| |
| def __init__(self): |
| self.reset() |
| |
| def setflags(self, **kw): |
| for key in kw.keys(): |
| if key not in self.validflags: |
| raise NameError("invalid keyword argument: %s" % str(key)) |
| for key, value in kw.items(): |
| setattr(self, key, value) |
| |
| def reset(self): |
| self.roots = [] |
| self.todo = {} |
| self.done = {} |
| self.bad = {} |
| |
| # Add a name table, so that the name URLs can be checked. Also |
| # serves as an implicit cache for which URLs are done. |
| self.name_table = {} |
| |
| self.round = 0 |
| # The following are not pickled: |
| self.robots = {} |
| self.errors = {} |
| self.urlopener = MyURLopener() |
| self.changed = 0 |
| |
| def note(self, level, format, *args): |
| if self.verbose > level: |
| if args: |
| format = format%args |
| self.message(format) |
| |
| def message(self, format, *args): |
| if args: |
| format = format%args |
| print(format) |
| |
| def __getstate__(self): |
| return (self.roots, self.todo, self.done, self.bad, self.round) |
| |
| def __setstate__(self, state): |
| self.reset() |
| (self.roots, self.todo, self.done, self.bad, self.round) = state |
| for root in self.roots: |
| self.addrobot(root) |
| for url in self.bad.keys(): |
| self.markerror(url) |
| |
| def addroot(self, root, add_to_do = 1): |
| if root not in self.roots: |
| troot = root |
| scheme, netloc, path, params, query, fragment = \ |
| urlparse.urlparse(root) |
| i = path.rfind("/") + 1 |
| if 0 < i < len(path): |
| path = path[:i] |
| troot = urlparse.urlunparse((scheme, netloc, path, |
| params, query, fragment)) |
| self.roots.append(troot) |
| self.addrobot(root) |
| if add_to_do: |
| self.newlink((root, ""), ("<root>", root)) |
| |
| def addrobot(self, root): |
| root = urlparse.urljoin(root, "/") |
| if self.robots.has_key(root): return |
| url = urlparse.urljoin(root, "/robots.txt") |
| self.robots[root] = rp = robotparser.RobotFileParser() |
| self.note(2, "Parsing %s", url) |
| rp.debug = self.verbose > 3 |
| rp.set_url(url) |
| try: |
| rp.read() |
| except (OSError, IOError) as msg: |
| self.note(1, "I/O error parsing %s: %s", url, msg) |
| |
| def run(self): |
| while self.todo: |
| self.round = self.round + 1 |
| self.note(0, "\nRound %d (%s)\n", self.round, self.status()) |
| urls = self.todo.keys() |
| urls.sort() |
| del urls[self.roundsize:] |
| for url in urls: |
| self.dopage(url) |
| |
| def status(self): |
| return "%d total, %d to do, %d done, %d bad" % ( |
| len(self.todo)+len(self.done), |
| len(self.todo), len(self.done), |
| len(self.bad)) |
| |
| def report(self): |
| self.message("") |
| if not self.todo: s = "Final" |
| else: s = "Interim" |
| self.message("%s Report (%s)", s, self.status()) |
| self.report_errors() |
| |
| def report_errors(self): |
| if not self.bad: |
| self.message("\nNo errors") |
| return |
| self.message("\nError Report:") |
| sources = self.errors.keys() |
| sources.sort() |
| for source in sources: |
| triples = self.errors[source] |
| self.message("") |
| if len(triples) > 1: |
| self.message("%d Errors in %s", len(triples), source) |
| else: |
| self.message("Error in %s", source) |
| # Call self.format_url() instead of referring |
| # to the URL directly, since the URLs in these |
| # triples is now a (URL, fragment) pair. The value |
| # of the "source" variable comes from the list of |
| # origins, and is a URL, not a pair. |
| for url, rawlink, msg in triples: |
| if rawlink != self.format_url(url): s = " (%s)" % rawlink |
| else: s = "" |
| self.message(" HREF %s%s\n msg %s", |
| self.format_url(url), s, msg) |
| |
| def dopage(self, url_pair): |
| |
| # All printing of URLs uses format_url(); argument changed to |
| # url_pair for clarity. |
| if self.verbose > 1: |
| if self.verbose > 2: |
| self.show("Check ", self.format_url(url_pair), |
| " from", self.todo[url_pair]) |
| else: |
| self.message("Check %s", self.format_url(url_pair)) |
| url, local_fragment = url_pair |
| if local_fragment and self.nonames: |
| self.markdone(url_pair) |
| return |
| try: |
| page = self.getpage(url_pair) |
| except sgmllib.SGMLParseError as msg: |
| msg = self.sanitize(msg) |
| self.note(0, "Error parsing %s: %s", |
| self.format_url(url_pair), msg) |
| # Dont actually mark the URL as bad - it exists, just |
| # we can't parse it! |
| page = None |
| if page: |
| # Store the page which corresponds to this URL. |
| self.name_table[url] = page |
| # If there is a fragment in this url_pair, and it's not |
| # in the list of names for the page, call setbad(), since |
| # it's a missing anchor. |
| if local_fragment and local_fragment not in page.getnames(): |
| self.setbad(url_pair, ("Missing name anchor `%s'" % local_fragment)) |
| for info in page.getlinkinfos(): |
| # getlinkinfos() now returns the fragment as well, |
| # and we store that fragment here in the "todo" dictionary. |
| link, rawlink, fragment = info |
| # However, we don't want the fragment as the origin, since |
| # the origin is logically a page. |
| origin = url, rawlink |
| self.newlink((link, fragment), origin) |
| else: |
| # If no page has been created yet, we want to |
| # record that fact. |
| self.name_table[url_pair[0]] = None |
| self.markdone(url_pair) |
| |
| def newlink(self, url, origin): |
| if self.done.has_key(url): |
| self.newdonelink(url, origin) |
| else: |
| self.newtodolink(url, origin) |
| |
| def newdonelink(self, url, origin): |
| if origin not in self.done[url]: |
| self.done[url].append(origin) |
| |
| # Call self.format_url(), since the URL here |
| # is now a (URL, fragment) pair. |
| self.note(3, " Done link %s", self.format_url(url)) |
| |
| # Make sure that if it's bad, that the origin gets added. |
| if self.bad.has_key(url): |
| source, rawlink = origin |
| triple = url, rawlink, self.bad[url] |
| self.seterror(source, triple) |
| |
| def newtodolink(self, url, origin): |
| # Call self.format_url(), since the URL here |
| # is now a (URL, fragment) pair. |
| if self.todo.has_key(url): |
| if origin not in self.todo[url]: |
| self.todo[url].append(origin) |
| self.note(3, " Seen todo link %s", self.format_url(url)) |
| else: |
| self.todo[url] = [origin] |
| self.note(3, " New todo link %s", self.format_url(url)) |
| |
| def format_url(self, url): |
| link, fragment = url |
| if fragment: return link + "#" + fragment |
| else: return link |
| |
| def markdone(self, url): |
| self.done[url] = self.todo[url] |
| del self.todo[url] |
| self.changed = 1 |
| |
| def inroots(self, url): |
| for root in self.roots: |
| if url[:len(root)] == root: |
| return self.isallowed(root, url) |
| return 0 |
| |
| def isallowed(self, root, url): |
| root = urlparse.urljoin(root, "/") |
| return self.robots[root].can_fetch(AGENTNAME, url) |
| |
| def getpage(self, url_pair): |
| # Incoming argument name is a (URL, fragment) pair. |
| # The page may have been cached in the name_table variable. |
| url, fragment = url_pair |
| if self.name_table.has_key(url): |
| return self.name_table[url] |
| |
| scheme, path = urllib.splittype(url) |
| if scheme in ('mailto', 'news', 'javascript', 'telnet'): |
| self.note(1, " Not checking %s URL" % scheme) |
| return None |
| isint = self.inroots(url) |
| |
| # Ensure that openpage gets the URL pair to |
| # print out its error message and record the error pair |
| # correctly. |
| if not isint: |
| if not self.checkext: |
| self.note(1, " Not checking ext link") |
| return None |
| f = self.openpage(url_pair) |
| if f: |
| self.safeclose(f) |
| return None |
| text, nurl = self.readhtml(url_pair) |
| |
| if nurl != url: |
| self.note(1, " Redirected to %s", nurl) |
| url = nurl |
| if text: |
| return Page(text, url, maxpage=self.maxpage, checker=self) |
| |
| # These next three functions take (URL, fragment) pairs as |
| # arguments, so that openpage() receives the appropriate tuple to |
| # record error messages. |
| def readhtml(self, url_pair): |
| url, fragment = url_pair |
| text = None |
| f, url = self.openhtml(url_pair) |
| if f: |
| text = f.read() |
| f.close() |
| return text, url |
| |
| def openhtml(self, url_pair): |
| url, fragment = url_pair |
| f = self.openpage(url_pair) |
| if f: |
| url = f.geturl() |
| info = f.info() |
| if not self.checkforhtml(info, url): |
| self.safeclose(f) |
| f = None |
| return f, url |
| |
| def openpage(self, url_pair): |
| url, fragment = url_pair |
| try: |
| return self.urlopener.open(url) |
| except (OSError, IOError) as msg: |
| msg = self.sanitize(msg) |
| self.note(0, "Error %s", msg) |
| if self.verbose > 0: |
| self.show(" HREF ", url, " from", self.todo[url_pair]) |
| self.setbad(url_pair, msg) |
| return None |
| |
| def checkforhtml(self, info, url): |
| if info.has_key('content-type'): |
| ctype = cgi.parse_header(info['content-type'])[0].lower() |
| if ';' in ctype: |
| # handle content-type: text/html; charset=iso8859-1 : |
| ctype = ctype.split(';', 1)[0].strip() |
| else: |
| if url[-1:] == "/": |
| return 1 |
| ctype, encoding = mimetypes.guess_type(url) |
| if ctype == 'text/html': |
| return 1 |
| else: |
| self.note(1, " Not HTML, mime type %s", ctype) |
| return 0 |
| |
| def setgood(self, url): |
| if self.bad.has_key(url): |
| del self.bad[url] |
| self.changed = 1 |
| self.note(0, "(Clear previously seen error)") |
| |
| def setbad(self, url, msg): |
| if self.bad.has_key(url) and self.bad[url] == msg: |
| self.note(0, "(Seen this error before)") |
| return |
| self.bad[url] = msg |
| self.changed = 1 |
| self.markerror(url) |
| |
| def markerror(self, url): |
| try: |
| origins = self.todo[url] |
| except KeyError: |
| origins = self.done[url] |
| for source, rawlink in origins: |
| triple = url, rawlink, self.bad[url] |
| self.seterror(source, triple) |
| |
| def seterror(self, url, triple): |
| try: |
| # Because of the way the URLs are now processed, I need to |
| # check to make sure the URL hasn't been entered in the |
| # error list. The first element of the triple here is a |
| # (URL, fragment) pair, but the URL key is not, since it's |
| # from the list of origins. |
| if triple not in self.errors[url]: |
| self.errors[url].append(triple) |
| except KeyError: |
| self.errors[url] = [triple] |
| |
| # The following used to be toplevel functions; they have been |
| # changed into methods so they can be overridden in subclasses. |
| |
| def show(self, p1, link, p2, origins): |
| self.message("%s %s", p1, link) |
| i = 0 |
| for source, rawlink in origins: |
| i = i+1 |
| if i == 2: |
| p2 = ' '*len(p2) |
| if rawlink != link: s = " (%s)" % rawlink |
| else: s = "" |
| self.message("%s %s%s", p2, source, s) |
| |
| def sanitize(self, msg): |
| if isinstance(IOError, ClassType) and isinstance(msg, IOError): |
| # Do the other branch recursively |
| msg.args = self.sanitize(msg.args) |
| elif isinstance(msg, TupleType): |
| if len(msg) >= 4 and msg[0] == 'http error' and \ |
| isinstance(msg[3], InstanceType): |
| # Remove the Message instance -- it may contain |
| # a file object which prevents pickling. |
| msg = msg[:3] + msg[4:] |
| return msg |
| |
| def safeclose(self, f): |
| try: |
| url = f.geturl() |
| except AttributeError: |
| pass |
| else: |
| if url[:4] == 'ftp:' or url[:7] == 'file://': |
| # Apparently ftp connections don't like to be closed |
| # prematurely... |
| text = f.read() |
| f.close() |
| |
| def save_pickle(self, dumpfile=DUMPFILE): |
| if not self.changed: |
| self.note(0, "\nNo need to save checkpoint") |
| elif not dumpfile: |
| self.note(0, "No dumpfile, won't save checkpoint") |
| else: |
| self.note(0, "\nSaving checkpoint to %s ...", dumpfile) |
| newfile = dumpfile + ".new" |
| f = open(newfile, "wb") |
| pickle.dump(self, f) |
| f.close() |
| try: |
| os.unlink(dumpfile) |
| except os.error: |
| pass |
| os.rename(newfile, dumpfile) |
| self.note(0, "Done.") |
| return 1 |
| |
| |
| class Page: |
| |
| def __init__(self, text, url, verbose=VERBOSE, maxpage=MAXPAGE, checker=None): |
| self.text = text |
| self.url = url |
| self.verbose = verbose |
| self.maxpage = maxpage |
| self.checker = checker |
| |
| # The parsing of the page is done in the __init__() routine in |
| # order to initialize the list of names the file |
| # contains. Stored the parser in an instance variable. Passed |
| # the URL to MyHTMLParser(). |
| size = len(self.text) |
| if size > self.maxpage: |
| self.note(0, "Skip huge file %s (%.0f Kbytes)", self.url, (size*0.001)) |
| self.parser = None |
| return |
| self.checker.note(2, " Parsing %s (%d bytes)", self.url, size) |
| self.parser = MyHTMLParser(url, verbose=self.verbose, |
| checker=self.checker) |
| self.parser.feed(self.text) |
| self.parser.close() |
| |
| def note(self, level, msg, *args): |
| if self.checker: |
| self.checker.note(level, msg, *args) |
| else: |
| if self.verbose >= level: |
| if args: |
| msg = msg%args |
| print(msg) |
| |
| # Method to retrieve names. |
| def getnames(self): |
| if self.parser: |
| return self.parser.names |
| else: |
| return [] |
| |
| def getlinkinfos(self): |
| # File reading is done in __init__() routine. Store parser in |
| # local variable to indicate success of parsing. |
| |
| # If no parser was stored, fail. |
| if not self.parser: return [] |
| |
| rawlinks = self.parser.getlinks() |
| base = urlparse.urljoin(self.url, self.parser.getbase() or "") |
| infos = [] |
| for rawlink in rawlinks: |
| t = urlparse.urlparse(rawlink) |
| # DON'T DISCARD THE FRAGMENT! Instead, include |
| # it in the tuples which are returned. See Checker.dopage(). |
| fragment = t[-1] |
| t = t[:-1] + ('',) |
| rawlink = urlparse.urlunparse(t) |
| link = urlparse.urljoin(base, rawlink) |
| infos.append((link, rawlink, fragment)) |
| |
| return infos |
| |
| |
| class MyStringIO(io.StringIO): |
| |
| def __init__(self, url, info): |
| self.__url = url |
| self.__info = info |
| super(MyStringIO, self).__init__(self) |
| |
| def info(self): |
| return self.__info |
| |
| def geturl(self): |
| return self.__url |
| |
| |
| class MyURLopener(urllib.FancyURLopener): |
| |
| http_error_default = urllib.URLopener.http_error_default |
| |
| def __init__(*args): |
| self = args[0] |
| urllib.FancyURLopener.__init__(*args) |
| self.addheaders = [ |
| ('User-agent', 'Python-webchecker/%s' % __version__), |
| ] |
| |
| def http_error_401(self, url, fp, errcode, errmsg, headers): |
| return None |
| |
| def open_file(self, url): |
| path = urllib.url2pathname(urllib.unquote(url)) |
| if os.path.isdir(path): |
| if path[-1] != os.sep: |
| url = url + '/' |
| indexpath = os.path.join(path, "index.html") |
| if os.path.exists(indexpath): |
| return self.open_file(url + "index.html") |
| try: |
| names = os.listdir(path) |
| except os.error as msg: |
| exc_type, exc_value, exc_tb = sys.exc_info() |
| raise IOError(msg).with_traceback(exc_tb) |
| names.sort() |
| s = MyStringIO("file:"+url, {'content-type': 'text/html'}) |
| s.write('<BASE HREF="file:%s">\n' % |
| urllib.quote(os.path.join(path, ""))) |
| for name in names: |
| q = urllib.quote(name) |
| s.write('<A HREF="%s">%s</A>\n' % (q, q)) |
| s.seek(0) |
| return s |
| return urllib.FancyURLopener.open_file(self, url) |
| |
| |
| class MyHTMLParser(sgmllib.SGMLParser): |
| |
| def __init__(self, url, verbose=VERBOSE, checker=None): |
| self.myverbose = verbose # now unused |
| self.checker = checker |
| self.base = None |
| self.links = {} |
| self.names = [] |
| self.url = url |
| sgmllib.SGMLParser.__init__(self) |
| |
| def check_name_id(self, attributes): |
| """ Check the name or id attributes on an element. |
| """ |
| # We must rescue the NAME or id (name is deprecated in XHTML) |
| # attributes from the anchor, in order to |
| # cache the internal anchors which are made |
| # available in the page. |
| for name, value in attributes: |
| if name == "name" or name == "id": |
| if value in self.names: |
| self.checker.message("WARNING: duplicate ID name %s in %s", |
| value, self.url) |
| else: self.names.append(value) |
| break |
| |
| def unknown_starttag(self, tag, attributes): |
| """ In XHTML, you can have id attributes on any element. |
| """ |
| self.check_name_id(attributes) |
| |
| def start_a(self, attributes): |
| self.link_attr(attributes, 'href') |
| self.check_name_id(attributes) |
| |
| def end_a(self): pass |
| |
| def do_area(self, attributes): |
| self.link_attr(attributes, 'href') |
| self.check_name_id(attributes) |
| |
| def do_body(self, attributes): |
| self.link_attr(attributes, 'background', 'bgsound') |
| self.check_name_id(attributes) |
| |
| def do_img(self, attributes): |
| self.link_attr(attributes, 'src', 'lowsrc') |
| self.check_name_id(attributes) |
| |
| def do_frame(self, attributes): |
| self.link_attr(attributes, 'src', 'longdesc') |
| self.check_name_id(attributes) |
| |
| def do_iframe(self, attributes): |
| self.link_attr(attributes, 'src', 'longdesc') |
| self.check_name_id(attributes) |
| |
| def do_link(self, attributes): |
| for name, value in attributes: |
| if name == "rel": |
| parts = value.lower().split() |
| if ( parts == ["stylesheet"] |
| or parts == ["alternate", "stylesheet"]): |
| self.link_attr(attributes, "href") |
| break |
| self.check_name_id(attributes) |
| |
| def do_object(self, attributes): |
| self.link_attr(attributes, 'data', 'usemap') |
| self.check_name_id(attributes) |
| |
| def do_script(self, attributes): |
| self.link_attr(attributes, 'src') |
| self.check_name_id(attributes) |
| |
| def do_table(self, attributes): |
| self.link_attr(attributes, 'background') |
| self.check_name_id(attributes) |
| |
| def do_td(self, attributes): |
| self.link_attr(attributes, 'background') |
| self.check_name_id(attributes) |
| |
| def do_th(self, attributes): |
| self.link_attr(attributes, 'background') |
| self.check_name_id(attributes) |
| |
| def do_tr(self, attributes): |
| self.link_attr(attributes, 'background') |
| self.check_name_id(attributes) |
| |
| def link_attr(self, attributes, *args): |
| for name, value in attributes: |
| if name in args: |
| if value: value = value.strip() |
| if value: self.links[value] = None |
| |
| def do_base(self, attributes): |
| for name, value in attributes: |
| if name == 'href': |
| if value: value = value.strip() |
| if value: |
| if self.checker: |
| self.checker.note(1, " Base %s", value) |
| self.base = value |
| self.check_name_id(attributes) |
| |
| def getlinks(self): |
| return self.links.keys() |
| |
| def getbase(self): |
| return self.base |
| |
| |
| if __name__ == '__main__': |
| main() |