| import unittest |
| from test import support |
| from contextlib import closing |
| import enum |
| import gc |
| import pickle |
| import select |
| import signal |
| import socket |
| import struct |
| import subprocess |
| import traceback |
| import sys, os, time, errno |
| from test.script_helper import assert_python_ok, spawn_python |
| try: |
| import threading |
| except ImportError: |
| threading = None |
| try: |
| import _testcapi |
| except ImportError: |
| _testcapi = None |
| |
| |
| class HandlerBCalled(Exception): |
| pass |
| |
| |
| def exit_subprocess(): |
| """Use os._exit(0) to exit the current subprocess. |
| |
| Otherwise, the test catches the SystemExit and continues executing |
| in parallel with the original test, so you wind up with an |
| exponential number of tests running concurrently. |
| """ |
| os._exit(0) |
| |
| |
| def ignoring_eintr(__func, *args, **kwargs): |
| try: |
| return __func(*args, **kwargs) |
| except OSError as e: |
| if e.errno != errno.EINTR: |
| raise |
| return None |
| |
| |
| class GenericTests(unittest.TestCase): |
| |
| @unittest.skipIf(threading is None, "test needs threading module") |
| def test_enums(self): |
| for name in dir(signal): |
| sig = getattr(signal, name) |
| if name in {'SIG_DFL', 'SIG_IGN'}: |
| self.assertIsInstance(sig, signal.Handlers) |
| elif name in {'SIG_BLOCK', 'SIG_UNBLOCK', 'SIG_SETMASK'}: |
| self.assertIsInstance(sig, signal.Sigmasks) |
| elif name.startswith('SIG') and not name.startswith('SIG_'): |
| self.assertIsInstance(sig, signal.Signals) |
| elif name.startswith('CTRL_'): |
| self.assertIsInstance(sig, signal.Signals) |
| self.assertEqual(sys.platform, "win32") |
| |
| |
| @unittest.skipIf(sys.platform == "win32", "Not valid on Windows") |
| class InterProcessSignalTests(unittest.TestCase): |
| MAX_DURATION = 20 # Entire test should last at most 20 sec. |
| |
| def setUp(self): |
| self.using_gc = gc.isenabled() |
| gc.disable() |
| |
| def tearDown(self): |
| if self.using_gc: |
| gc.enable() |
| |
| def format_frame(self, frame, limit=None): |
| return ''.join(traceback.format_stack(frame, limit=limit)) |
| |
| def handlerA(self, signum, frame): |
| self.a_called = True |
| |
| def handlerB(self, signum, frame): |
| self.b_called = True |
| raise HandlerBCalled(signum, self.format_frame(frame)) |
| |
| def wait(self, child): |
| """Wait for child to finish, ignoring EINTR.""" |
| while True: |
| try: |
| child.wait() |
| return |
| except OSError as e: |
| if e.errno != errno.EINTR: |
| raise |
| |
| def run_test(self): |
| # Install handlers. This function runs in a sub-process, so we |
| # don't worry about re-setting the default handlers. |
| signal.signal(signal.SIGHUP, self.handlerA) |
| signal.signal(signal.SIGUSR1, self.handlerB) |
| signal.signal(signal.SIGUSR2, signal.SIG_IGN) |
| signal.signal(signal.SIGALRM, signal.default_int_handler) |
| |
| # Variables the signals will modify: |
| self.a_called = False |
| self.b_called = False |
| |
| # Let the sub-processes know who to send signals to. |
| pid = os.getpid() |
| |
| child = ignoring_eintr(subprocess.Popen, ['kill', '-HUP', str(pid)]) |
| if child: |
| self.wait(child) |
| if not self.a_called: |
| time.sleep(1) # Give the signal time to be delivered. |
| self.assertTrue(self.a_called) |
| self.assertFalse(self.b_called) |
| self.a_called = False |
| |
| # Make sure the signal isn't delivered while the previous |
| # Popen object is being destroyed, because __del__ swallows |
| # exceptions. |
| del child |
| try: |
| child = subprocess.Popen(['kill', '-USR1', str(pid)]) |
| # This wait should be interrupted by the signal's exception. |
| self.wait(child) |
| time.sleep(1) # Give the signal time to be delivered. |
| self.fail('HandlerBCalled exception not raised') |
| except HandlerBCalled: |
| self.assertTrue(self.b_called) |
| self.assertFalse(self.a_called) |
| |
| child = ignoring_eintr(subprocess.Popen, ['kill', '-USR2', str(pid)]) |
| if child: |
| self.wait(child) # Nothing should happen. |
| |
| try: |
| signal.alarm(1) |
| # The race condition in pause doesn't matter in this case, |
| # since alarm is going to raise a KeyboardException, which |
| # will skip the call. |
| signal.pause() |
| # But if another signal arrives before the alarm, pause |
| # may return early. |
| time.sleep(1) |
| except KeyboardInterrupt: |
| pass |
| except: |
| self.fail("Some other exception woke us from pause: %s" % |
| traceback.format_exc()) |
| else: |
| self.fail("pause returned of its own accord, and the signal" |
| " didn't arrive after another second.") |
| |
| # Issue 3864, unknown if this affects earlier versions of freebsd also |
| @unittest.skipIf(sys.platform=='freebsd6', |
| 'inter process signals not reliable (do not mix well with threading) ' |
| 'on freebsd6') |
| def test_main(self): |
| # This function spawns a child process to insulate the main |
| # test-running process from all the signals. It then |
| # communicates with that child process over a pipe and |
| # re-raises information about any exceptions the child |
| # raises. The real work happens in self.run_test(). |
| os_done_r, os_done_w = os.pipe() |
| with closing(os.fdopen(os_done_r, 'rb')) as done_r, \ |
| closing(os.fdopen(os_done_w, 'wb')) as done_w: |
| child = os.fork() |
| if child == 0: |
| # In the child process; run the test and report results |
| # through the pipe. |
| try: |
| done_r.close() |
| # Have to close done_w again here because |
| # exit_subprocess() will skip the enclosing with block. |
| with closing(done_w): |
| try: |
| self.run_test() |
| except: |
| pickle.dump(traceback.format_exc(), done_w) |
| else: |
| pickle.dump(None, done_w) |
| except: |
| print('Uh oh, raised from pickle.') |
| traceback.print_exc() |
| finally: |
| exit_subprocess() |
| |
| done_w.close() |
| # Block for up to MAX_DURATION seconds for the test to finish. |
| r, w, x = select.select([done_r], [], [], self.MAX_DURATION) |
| if done_r in r: |
| tb = pickle.load(done_r) |
| if tb: |
| self.fail(tb) |
| else: |
| os.kill(child, signal.SIGKILL) |
| self.fail('Test deadlocked after %d seconds.' % |
| self.MAX_DURATION) |
| |
| |
| @unittest.skipIf(sys.platform == "win32", "Not valid on Windows") |
| class PosixTests(unittest.TestCase): |
| def trivial_signal_handler(self, *args): |
| pass |
| |
| def test_out_of_range_signal_number_raises_error(self): |
| self.assertRaises(ValueError, signal.getsignal, 4242) |
| |
| self.assertRaises(ValueError, signal.signal, 4242, |
| self.trivial_signal_handler) |
| |
| def test_setting_signal_handler_to_none_raises_error(self): |
| self.assertRaises(TypeError, signal.signal, |
| signal.SIGUSR1, None) |
| |
| def test_getsignal(self): |
| hup = signal.signal(signal.SIGHUP, self.trivial_signal_handler) |
| self.assertIsInstance(hup, signal.Handlers) |
| self.assertEqual(signal.getsignal(signal.SIGHUP), |
| self.trivial_signal_handler) |
| signal.signal(signal.SIGHUP, hup) |
| self.assertEqual(signal.getsignal(signal.SIGHUP), hup) |
| |
| |
| @unittest.skipUnless(sys.platform == "win32", "Windows specific") |
| class WindowsSignalTests(unittest.TestCase): |
| def test_issue9324(self): |
| # Updated for issue #10003, adding SIGBREAK |
| handler = lambda x, y: None |
| checked = set() |
| for sig in (signal.SIGABRT, signal.SIGBREAK, signal.SIGFPE, |
| signal.SIGILL, signal.SIGINT, signal.SIGSEGV, |
| signal.SIGTERM): |
| # Set and then reset a handler for signals that work on windows. |
| # Issue #18396, only for signals without a C-level handler. |
| if signal.getsignal(sig) is not None: |
| signal.signal(sig, signal.signal(sig, handler)) |
| checked.add(sig) |
| # Issue #18396: Ensure the above loop at least tested *something* |
| self.assertTrue(checked) |
| |
| with self.assertRaises(ValueError): |
| signal.signal(-1, handler) |
| |
| with self.assertRaises(ValueError): |
| signal.signal(7, handler) |
| |
| |
| class WakeupFDTests(unittest.TestCase): |
| |
| def test_invalid_fd(self): |
| fd = support.make_bad_fd() |
| self.assertRaises((ValueError, OSError), |
| signal.set_wakeup_fd, fd) |
| |
| def test_invalid_socket(self): |
| sock = socket.socket() |
| fd = sock.fileno() |
| sock.close() |
| self.assertRaises((ValueError, OSError), |
| signal.set_wakeup_fd, fd) |
| |
| def test_set_wakeup_fd_result(self): |
| r1, w1 = os.pipe() |
| self.addCleanup(os.close, r1) |
| self.addCleanup(os.close, w1) |
| r2, w2 = os.pipe() |
| self.addCleanup(os.close, r2) |
| self.addCleanup(os.close, w2) |
| |
| if hasattr(os, 'set_blocking'): |
| os.set_blocking(w1, False) |
| os.set_blocking(w2, False) |
| |
| signal.set_wakeup_fd(w1) |
| self.assertEqual(signal.set_wakeup_fd(w2), w1) |
| self.assertEqual(signal.set_wakeup_fd(-1), w2) |
| self.assertEqual(signal.set_wakeup_fd(-1), -1) |
| |
| def test_set_wakeup_fd_socket_result(self): |
| sock1 = socket.socket() |
| self.addCleanup(sock1.close) |
| sock1.setblocking(False) |
| fd1 = sock1.fileno() |
| |
| sock2 = socket.socket() |
| self.addCleanup(sock2.close) |
| sock2.setblocking(False) |
| fd2 = sock2.fileno() |
| |
| signal.set_wakeup_fd(fd1) |
| self.assertEqual(signal.set_wakeup_fd(fd2), fd1) |
| self.assertEqual(signal.set_wakeup_fd(-1), fd2) |
| self.assertEqual(signal.set_wakeup_fd(-1), -1) |
| |
| # On Windows, files are always blocking and Windows does not provide a |
| # function to test if a socket is in non-blocking mode. |
| @unittest.skipIf(sys.platform == "win32", "tests specific to POSIX") |
| def test_set_wakeup_fd_blocking(self): |
| rfd, wfd = os.pipe() |
| self.addCleanup(os.close, rfd) |
| self.addCleanup(os.close, wfd) |
| |
| # fd must be non-blocking |
| os.set_blocking(wfd, True) |
| with self.assertRaises(ValueError) as cm: |
| signal.set_wakeup_fd(wfd) |
| self.assertEqual(str(cm.exception), |
| "the fd %s must be in non-blocking mode" % wfd) |
| |
| # non-blocking is ok |
| os.set_blocking(wfd, False) |
| signal.set_wakeup_fd(wfd) |
| signal.set_wakeup_fd(-1) |
| |
| |
| @unittest.skipIf(sys.platform == "win32", "Not valid on Windows") |
| class WakeupSignalTests(unittest.TestCase): |
| @unittest.skipIf(_testcapi is None, 'need _testcapi') |
| def check_wakeup(self, test_body, *signals, ordered=True): |
| # use a subprocess to have only one thread |
| code = """if 1: |
| import _testcapi |
| import os |
| import signal |
| import struct |
| |
| signals = {!r} |
| |
| def handler(signum, frame): |
| pass |
| |
| def check_signum(signals): |
| data = os.read(read, len(signals)+1) |
| raised = struct.unpack('%uB' % len(data), data) |
| if not {!r}: |
| raised = set(raised) |
| signals = set(signals) |
| if raised != signals: |
| raise Exception("%r != %r" % (raised, signals)) |
| |
| {} |
| |
| signal.signal(signal.SIGALRM, handler) |
| read, write = os.pipe() |
| os.set_blocking(write, False) |
| signal.set_wakeup_fd(write) |
| |
| test() |
| check_signum(signals) |
| |
| os.close(read) |
| os.close(write) |
| """.format(tuple(map(int, signals)), ordered, test_body) |
| |
| assert_python_ok('-c', code) |
| |
| @unittest.skipIf(_testcapi is None, 'need _testcapi') |
| def test_wakeup_write_error(self): |
| # Issue #16105: write() errors in the C signal handler should not |
| # pass silently. |
| # Use a subprocess to have only one thread. |
| code = """if 1: |
| import _testcapi |
| import errno |
| import os |
| import signal |
| import sys |
| from test.support import captured_stderr |
| |
| def handler(signum, frame): |
| 1/0 |
| |
| signal.signal(signal.SIGALRM, handler) |
| r, w = os.pipe() |
| os.set_blocking(r, False) |
| |
| # Set wakeup_fd a read-only file descriptor to trigger the error |
| signal.set_wakeup_fd(r) |
| try: |
| with captured_stderr() as err: |
| _testcapi.raise_signal(signal.SIGALRM) |
| except ZeroDivisionError: |
| # An ignored exception should have been printed out on stderr |
| err = err.getvalue() |
| if ('Exception ignored when trying to write to the signal wakeup fd' |
| not in err): |
| raise AssertionError(err) |
| if ('OSError: [Errno %d]' % errno.EBADF) not in err: |
| raise AssertionError(err) |
| else: |
| raise AssertionError("ZeroDivisionError not raised") |
| |
| os.close(r) |
| os.close(w) |
| """ |
| r, w = os.pipe() |
| try: |
| os.write(r, b'x') |
| except OSError: |
| pass |
| else: |
| self.skipTest("OS doesn't report write() error on the read end of a pipe") |
| finally: |
| os.close(r) |
| os.close(w) |
| |
| assert_python_ok('-c', code) |
| |
| def test_wakeup_fd_early(self): |
| self.check_wakeup("""def test(): |
| import select |
| import time |
| |
| TIMEOUT_FULL = 10 |
| TIMEOUT_HALF = 5 |
| |
| signal.alarm(1) |
| before_time = time.time() |
| # We attempt to get a signal during the sleep, |
| # before select is called |
| time.sleep(TIMEOUT_FULL) |
| mid_time = time.time() |
| dt = mid_time - before_time |
| if dt >= TIMEOUT_HALF: |
| raise Exception("%s >= %s" % (dt, TIMEOUT_HALF)) |
| select.select([read], [], [], TIMEOUT_FULL) |
| after_time = time.time() |
| dt = after_time - mid_time |
| if dt >= TIMEOUT_HALF: |
| raise Exception("%s >= %s" % (dt, TIMEOUT_HALF)) |
| """, signal.SIGALRM) |
| |
| def test_wakeup_fd_during(self): |
| self.check_wakeup("""def test(): |
| import select |
| import time |
| |
| TIMEOUT_FULL = 10 |
| TIMEOUT_HALF = 5 |
| |
| signal.alarm(1) |
| before_time = time.time() |
| # We attempt to get a signal during the select call |
| try: |
| select.select([read], [], [], TIMEOUT_FULL) |
| except OSError: |
| pass |
| else: |
| raise Exception("OSError not raised") |
| after_time = time.time() |
| dt = after_time - before_time |
| if dt >= TIMEOUT_HALF: |
| raise Exception("%s >= %s" % (dt, TIMEOUT_HALF)) |
| """, signal.SIGALRM) |
| |
| def test_signum(self): |
| self.check_wakeup("""def test(): |
| import _testcapi |
| signal.signal(signal.SIGUSR1, handler) |
| _testcapi.raise_signal(signal.SIGUSR1) |
| _testcapi.raise_signal(signal.SIGALRM) |
| """, signal.SIGUSR1, signal.SIGALRM) |
| |
| @unittest.skipUnless(hasattr(signal, 'pthread_sigmask'), |
| 'need signal.pthread_sigmask()') |
| def test_pending(self): |
| self.check_wakeup("""def test(): |
| signum1 = signal.SIGUSR1 |
| signum2 = signal.SIGUSR2 |
| |
| signal.signal(signum1, handler) |
| signal.signal(signum2, handler) |
| |
| signal.pthread_sigmask(signal.SIG_BLOCK, (signum1, signum2)) |
| _testcapi.raise_signal(signum1) |
| _testcapi.raise_signal(signum2) |
| # Unblocking the 2 signals calls the C signal handler twice |
| signal.pthread_sigmask(signal.SIG_UNBLOCK, (signum1, signum2)) |
| """, signal.SIGUSR1, signal.SIGUSR2, ordered=False) |
| |
| |
| @unittest.skipUnless(hasattr(socket, 'socketpair'), 'need socket.socketpair') |
| class WakeupSocketSignalTests(unittest.TestCase): |
| |
| @unittest.skipIf(_testcapi is None, 'need _testcapi') |
| def test_socket(self): |
| # use a subprocess to have only one thread |
| code = """if 1: |
| import signal |
| import socket |
| import struct |
| import _testcapi |
| |
| signum = signal.SIGINT |
| signals = (signum,) |
| |
| def handler(signum, frame): |
| pass |
| |
| signal.signal(signum, handler) |
| |
| read, write = socket.socketpair() |
| read.setblocking(False) |
| write.setblocking(False) |
| signal.set_wakeup_fd(write.fileno()) |
| |
| _testcapi.raise_signal(signum) |
| |
| data = read.recv(1) |
| if not data: |
| raise Exception("no signum written") |
| raised = struct.unpack('B', data) |
| if raised != signals: |
| raise Exception("%r != %r" % (raised, signals)) |
| |
| read.close() |
| write.close() |
| """ |
| |
| assert_python_ok('-c', code) |
| |
| @unittest.skipIf(_testcapi is None, 'need _testcapi') |
| def test_send_error(self): |
| # Use a subprocess to have only one thread. |
| if os.name == 'nt': |
| action = 'send' |
| else: |
| action = 'write' |
| code = """if 1: |
| import errno |
| import signal |
| import socket |
| import sys |
| import time |
| import _testcapi |
| from test.support import captured_stderr |
| |
| signum = signal.SIGINT |
| |
| def handler(signum, frame): |
| pass |
| |
| signal.signal(signum, handler) |
| |
| read, write = socket.socketpair() |
| read.setblocking(False) |
| write.setblocking(False) |
| |
| signal.set_wakeup_fd(write.fileno()) |
| |
| # Close sockets: send() will fail |
| read.close() |
| write.close() |
| |
| with captured_stderr() as err: |
| _testcapi.raise_signal(signum) |
| |
| err = err.getvalue() |
| if ('Exception ignored when trying to {action} to the signal wakeup fd' |
| not in err): |
| raise AssertionError(err) |
| """.format(action=action) |
| assert_python_ok('-c', code) |
| |
| |
| @unittest.skipIf(sys.platform == "win32", "Not valid on Windows") |
| class SiginterruptTest(unittest.TestCase): |
| |
| def readpipe_interrupted(self, interrupt): |
| """Perform a read during which a signal will arrive. Return True if the |
| read is interrupted by the signal and raises an exception. Return False |
| if it returns normally. |
| """ |
| # use a subprocess to have only one thread, to have a timeout on the |
| # blocking read and to not touch signal handling in this process |
| code = """if 1: |
| import errno |
| import os |
| import signal |
| import sys |
| |
| interrupt = %r |
| r, w = os.pipe() |
| |
| def handler(signum, frame): |
| pass |
| |
| signal.signal(signal.SIGALRM, handler) |
| if interrupt is not None: |
| signal.siginterrupt(signal.SIGALRM, interrupt) |
| |
| print("ready") |
| sys.stdout.flush() |
| |
| # run the test twice |
| try: |
| for loop in range(2): |
| # send a SIGALRM in a second (during the read) |
| signal.alarm(1) |
| try: |
| # blocking call: read from a pipe without data |
| os.read(r, 1) |
| except OSError as err: |
| if err.errno != errno.EINTR: |
| raise |
| else: |
| sys.exit(2) |
| sys.exit(3) |
| finally: |
| os.close(r) |
| os.close(w) |
| """ % (interrupt,) |
| with spawn_python('-c', code) as process: |
| try: |
| # wait until the child process is loaded and has started |
| first_line = process.stdout.readline() |
| |
| stdout, stderr = process.communicate(timeout=5.0) |
| except subprocess.TimeoutExpired: |
| process.kill() |
| return False |
| else: |
| stdout = first_line + stdout |
| exitcode = process.wait() |
| if exitcode not in (2, 3): |
| raise Exception("Child error (exit code %s): %r" |
| % (exitcode, stdout)) |
| return (exitcode == 3) |
| |
| def test_without_siginterrupt(self): |
| # If a signal handler is installed and siginterrupt is not called |
| # at all, when that signal arrives, it interrupts a syscall that's in |
| # progress. |
| interrupted = self.readpipe_interrupted(None) |
| self.assertTrue(interrupted) |
| |
| def test_siginterrupt_on(self): |
| # If a signal handler is installed and siginterrupt is called with |
| # a true value for the second argument, when that signal arrives, it |
| # interrupts a syscall that's in progress. |
| interrupted = self.readpipe_interrupted(True) |
| self.assertTrue(interrupted) |
| |
| def test_siginterrupt_off(self): |
| # If a signal handler is installed and siginterrupt is called with |
| # a false value for the second argument, when that signal arrives, it |
| # does not interrupt a syscall that's in progress. |
| interrupted = self.readpipe_interrupted(False) |
| self.assertFalse(interrupted) |
| |
| |
| @unittest.skipIf(sys.platform == "win32", "Not valid on Windows") |
| class ItimerTest(unittest.TestCase): |
| def setUp(self): |
| self.hndl_called = False |
| self.hndl_count = 0 |
| self.itimer = None |
| self.old_alarm = signal.signal(signal.SIGALRM, self.sig_alrm) |
| |
| def tearDown(self): |
| signal.signal(signal.SIGALRM, self.old_alarm) |
| if self.itimer is not None: # test_itimer_exc doesn't change this attr |
| # just ensure that itimer is stopped |
| signal.setitimer(self.itimer, 0) |
| |
| def sig_alrm(self, *args): |
| self.hndl_called = True |
| |
| def sig_vtalrm(self, *args): |
| self.hndl_called = True |
| |
| if self.hndl_count > 3: |
| # it shouldn't be here, because it should have been disabled. |
| raise signal.ItimerError("setitimer didn't disable ITIMER_VIRTUAL " |
| "timer.") |
| elif self.hndl_count == 3: |
| # disable ITIMER_VIRTUAL, this function shouldn't be called anymore |
| signal.setitimer(signal.ITIMER_VIRTUAL, 0) |
| |
| self.hndl_count += 1 |
| |
| def sig_prof(self, *args): |
| self.hndl_called = True |
| signal.setitimer(signal.ITIMER_PROF, 0) |
| |
| def test_itimer_exc(self): |
| # XXX I'm assuming -1 is an invalid itimer, but maybe some platform |
| # defines it ? |
| self.assertRaises(signal.ItimerError, signal.setitimer, -1, 0) |
| # Negative times are treated as zero on some platforms. |
| if 0: |
| self.assertRaises(signal.ItimerError, |
| signal.setitimer, signal.ITIMER_REAL, -1) |
| |
| def test_itimer_real(self): |
| self.itimer = signal.ITIMER_REAL |
| signal.setitimer(self.itimer, 1.0) |
| signal.pause() |
| self.assertEqual(self.hndl_called, True) |
| |
| # Issue 3864, unknown if this affects earlier versions of freebsd also |
| @unittest.skipIf(sys.platform in ('freebsd6', 'netbsd5'), |
| 'itimer not reliable (does not mix well with threading) on some BSDs.') |
| def test_itimer_virtual(self): |
| self.itimer = signal.ITIMER_VIRTUAL |
| signal.signal(signal.SIGVTALRM, self.sig_vtalrm) |
| signal.setitimer(self.itimer, 0.3, 0.2) |
| |
| start_time = time.time() |
| while time.time() - start_time < 60.0: |
| # use up some virtual time by doing real work |
| _ = pow(12345, 67890, 10000019) |
| if signal.getitimer(self.itimer) == (0.0, 0.0): |
| break # sig_vtalrm handler stopped this itimer |
| else: # Issue 8424 |
| self.skipTest("timeout: likely cause: machine too slow or load too " |
| "high") |
| |
| # virtual itimer should be (0.0, 0.0) now |
| self.assertEqual(signal.getitimer(self.itimer), (0.0, 0.0)) |
| # and the handler should have been called |
| self.assertEqual(self.hndl_called, True) |
| |
| # Issue 3864, unknown if this affects earlier versions of freebsd also |
| @unittest.skipIf(sys.platform=='freebsd6', |
| 'itimer not reliable (does not mix well with threading) on freebsd6') |
| def test_itimer_prof(self): |
| self.itimer = signal.ITIMER_PROF |
| signal.signal(signal.SIGPROF, self.sig_prof) |
| signal.setitimer(self.itimer, 0.2, 0.2) |
| |
| start_time = time.time() |
| while time.time() - start_time < 60.0: |
| # do some work |
| _ = pow(12345, 67890, 10000019) |
| if signal.getitimer(self.itimer) == (0.0, 0.0): |
| break # sig_prof handler stopped this itimer |
| else: # Issue 8424 |
| self.skipTest("timeout: likely cause: machine too slow or load too " |
| "high") |
| |
| # profiling itimer should be (0.0, 0.0) now |
| self.assertEqual(signal.getitimer(self.itimer), (0.0, 0.0)) |
| # and the handler should have been called |
| self.assertEqual(self.hndl_called, True) |
| |
| |
| class PendingSignalsTests(unittest.TestCase): |
| """ |
| Test pthread_sigmask(), pthread_kill(), sigpending() and sigwait() |
| functions. |
| """ |
| @unittest.skipUnless(hasattr(signal, 'sigpending'), |
| 'need signal.sigpending()') |
| def test_sigpending_empty(self): |
| self.assertEqual(signal.sigpending(), set()) |
| |
| @unittest.skipUnless(hasattr(signal, 'pthread_sigmask'), |
| 'need signal.pthread_sigmask()') |
| @unittest.skipUnless(hasattr(signal, 'sigpending'), |
| 'need signal.sigpending()') |
| def test_sigpending(self): |
| code = """if 1: |
| import os |
| import signal |
| |
| def handler(signum, frame): |
| 1/0 |
| |
| signum = signal.SIGUSR1 |
| signal.signal(signum, handler) |
| |
| signal.pthread_sigmask(signal.SIG_BLOCK, [signum]) |
| os.kill(os.getpid(), signum) |
| pending = signal.sigpending() |
| for sig in pending: |
| assert isinstance(sig, signal.Signals), repr(pending) |
| if pending != {signum}: |
| raise Exception('%s != {%s}' % (pending, signum)) |
| try: |
| signal.pthread_sigmask(signal.SIG_UNBLOCK, [signum]) |
| except ZeroDivisionError: |
| pass |
| else: |
| raise Exception("ZeroDivisionError not raised") |
| """ |
| assert_python_ok('-c', code) |
| |
| @unittest.skipUnless(hasattr(signal, 'pthread_kill'), |
| 'need signal.pthread_kill()') |
| def test_pthread_kill(self): |
| code = """if 1: |
| import signal |
| import threading |
| import sys |
| |
| signum = signal.SIGUSR1 |
| |
| def handler(signum, frame): |
| 1/0 |
| |
| signal.signal(signum, handler) |
| |
| if sys.platform == 'freebsd6': |
| # Issue #12392 and #12469: send a signal to the main thread |
| # doesn't work before the creation of the first thread on |
| # FreeBSD 6 |
| def noop(): |
| pass |
| thread = threading.Thread(target=noop) |
| thread.start() |
| thread.join() |
| |
| tid = threading.get_ident() |
| try: |
| signal.pthread_kill(tid, signum) |
| except ZeroDivisionError: |
| pass |
| else: |
| raise Exception("ZeroDivisionError not raised") |
| """ |
| assert_python_ok('-c', code) |
| |
| @unittest.skipUnless(hasattr(signal, 'pthread_sigmask'), |
| 'need signal.pthread_sigmask()') |
| def wait_helper(self, blocked, test): |
| """ |
| test: body of the "def test(signum):" function. |
| blocked: number of the blocked signal |
| """ |
| code = '''if 1: |
| import signal |
| import sys |
| from signal import Signals |
| |
| def handler(signum, frame): |
| 1/0 |
| |
| %s |
| |
| blocked = %s |
| signum = signal.SIGALRM |
| |
| # child: block and wait the signal |
| try: |
| signal.signal(signum, handler) |
| signal.pthread_sigmask(signal.SIG_BLOCK, [blocked]) |
| |
| # Do the tests |
| test(signum) |
| |
| # The handler must not be called on unblock |
| try: |
| signal.pthread_sigmask(signal.SIG_UNBLOCK, [blocked]) |
| except ZeroDivisionError: |
| print("the signal handler has been called", |
| file=sys.stderr) |
| sys.exit(1) |
| except BaseException as err: |
| print("error: {}".format(err), file=sys.stderr) |
| sys.stderr.flush() |
| sys.exit(1) |
| ''' % (test.strip(), blocked) |
| |
| # sig*wait* must be called with the signal blocked: since the current |
| # process might have several threads running, use a subprocess to have |
| # a single thread. |
| assert_python_ok('-c', code) |
| |
| @unittest.skipUnless(hasattr(signal, 'sigwait'), |
| 'need signal.sigwait()') |
| def test_sigwait(self): |
| self.wait_helper(signal.SIGALRM, ''' |
| def test(signum): |
| signal.alarm(1) |
| received = signal.sigwait([signum]) |
| assert isinstance(received, signal.Signals), received |
| if received != signum: |
| raise Exception('received %s, not %s' % (received, signum)) |
| ''') |
| |
| @unittest.skipUnless(hasattr(signal, 'sigwaitinfo'), |
| 'need signal.sigwaitinfo()') |
| def test_sigwaitinfo(self): |
| self.wait_helper(signal.SIGALRM, ''' |
| def test(signum): |
| signal.alarm(1) |
| info = signal.sigwaitinfo([signum]) |
| if info.si_signo != signum: |
| raise Exception("info.si_signo != %s" % signum) |
| ''') |
| |
| @unittest.skipUnless(hasattr(signal, 'sigtimedwait'), |
| 'need signal.sigtimedwait()') |
| def test_sigtimedwait(self): |
| self.wait_helper(signal.SIGALRM, ''' |
| def test(signum): |
| signal.alarm(1) |
| info = signal.sigtimedwait([signum], 10.1000) |
| if info.si_signo != signum: |
| raise Exception('info.si_signo != %s' % signum) |
| ''') |
| |
| @unittest.skipUnless(hasattr(signal, 'sigtimedwait'), |
| 'need signal.sigtimedwait()') |
| def test_sigtimedwait_poll(self): |
| # check that polling with sigtimedwait works |
| self.wait_helper(signal.SIGALRM, ''' |
| def test(signum): |
| import os |
| os.kill(os.getpid(), signum) |
| info = signal.sigtimedwait([signum], 0) |
| if info.si_signo != signum: |
| raise Exception('info.si_signo != %s' % signum) |
| ''') |
| |
| @unittest.skipUnless(hasattr(signal, 'sigtimedwait'), |
| 'need signal.sigtimedwait()') |
| def test_sigtimedwait_timeout(self): |
| self.wait_helper(signal.SIGALRM, ''' |
| def test(signum): |
| received = signal.sigtimedwait([signum], 1.0) |
| if received is not None: |
| raise Exception("received=%r" % (received,)) |
| ''') |
| |
| @unittest.skipUnless(hasattr(signal, 'sigtimedwait'), |
| 'need signal.sigtimedwait()') |
| def test_sigtimedwait_negative_timeout(self): |
| signum = signal.SIGALRM |
| self.assertRaises(ValueError, signal.sigtimedwait, [signum], -1.0) |
| |
| @unittest.skipUnless(hasattr(signal, 'sigwaitinfo'), |
| 'need signal.sigwaitinfo()') |
| # Issue #18238: sigwaitinfo() can be interrupted on Linux (raises |
| # InterruptedError), but not on AIX |
| @unittest.skipIf(sys.platform.startswith("aix"), |
| 'signal.sigwaitinfo() cannot be interrupted on AIX') |
| def test_sigwaitinfo_interrupted(self): |
| self.wait_helper(signal.SIGUSR1, ''' |
| def test(signum): |
| import errno |
| |
| hndl_called = True |
| def alarm_handler(signum, frame): |
| hndl_called = False |
| |
| signal.signal(signal.SIGALRM, alarm_handler) |
| signal.alarm(1) |
| try: |
| signal.sigwaitinfo([signal.SIGUSR1]) |
| except OSError as e: |
| if e.errno == errno.EINTR: |
| if not hndl_called: |
| raise Exception("SIGALRM handler not called") |
| else: |
| raise Exception("Expected EINTR to be raised by sigwaitinfo") |
| else: |
| raise Exception("Expected EINTR to be raised by sigwaitinfo") |
| ''') |
| |
| @unittest.skipUnless(hasattr(signal, 'sigwait'), |
| 'need signal.sigwait()') |
| @unittest.skipUnless(hasattr(signal, 'pthread_sigmask'), |
| 'need signal.pthread_sigmask()') |
| @unittest.skipIf(threading is None, "test needs threading module") |
| def test_sigwait_thread(self): |
| # Check that calling sigwait() from a thread doesn't suspend the whole |
| # process. A new interpreter is spawned to avoid problems when mixing |
| # threads and fork(): only async-safe functions are allowed between |
| # fork() and exec(). |
| assert_python_ok("-c", """if True: |
| import os, threading, sys, time, signal |
| |
| # the default handler terminates the process |
| signum = signal.SIGUSR1 |
| |
| def kill_later(): |
| # wait until the main thread is waiting in sigwait() |
| time.sleep(1) |
| os.kill(os.getpid(), signum) |
| |
| # the signal must be blocked by all the threads |
| signal.pthread_sigmask(signal.SIG_BLOCK, [signum]) |
| killer = threading.Thread(target=kill_later) |
| killer.start() |
| received = signal.sigwait([signum]) |
| if received != signum: |
| print("sigwait() received %s, not %s" % (received, signum), |
| file=sys.stderr) |
| sys.exit(1) |
| killer.join() |
| # unblock the signal, which should have been cleared by sigwait() |
| signal.pthread_sigmask(signal.SIG_UNBLOCK, [signum]) |
| """) |
| |
| @unittest.skipUnless(hasattr(signal, 'pthread_sigmask'), |
| 'need signal.pthread_sigmask()') |
| def test_pthread_sigmask_arguments(self): |
| self.assertRaises(TypeError, signal.pthread_sigmask) |
| self.assertRaises(TypeError, signal.pthread_sigmask, 1) |
| self.assertRaises(TypeError, signal.pthread_sigmask, 1, 2, 3) |
| self.assertRaises(OSError, signal.pthread_sigmask, 1700, []) |
| |
| @unittest.skipUnless(hasattr(signal, 'pthread_sigmask'), |
| 'need signal.pthread_sigmask()') |
| def test_pthread_sigmask(self): |
| code = """if 1: |
| import signal |
| import os; import threading |
| |
| def handler(signum, frame): |
| 1/0 |
| |
| def kill(signum): |
| os.kill(os.getpid(), signum) |
| |
| def check_mask(mask): |
| for sig in mask: |
| assert isinstance(sig, signal.Signals), repr(sig) |
| |
| def read_sigmask(): |
| sigmask = signal.pthread_sigmask(signal.SIG_BLOCK, []) |
| check_mask(sigmask) |
| return sigmask |
| |
| signum = signal.SIGUSR1 |
| |
| # Install our signal handler |
| old_handler = signal.signal(signum, handler) |
| |
| # Unblock SIGUSR1 (and copy the old mask) to test our signal handler |
| old_mask = signal.pthread_sigmask(signal.SIG_UNBLOCK, [signum]) |
| check_mask(old_mask) |
| try: |
| kill(signum) |
| except ZeroDivisionError: |
| pass |
| else: |
| raise Exception("ZeroDivisionError not raised") |
| |
| # Block and then raise SIGUSR1. The signal is blocked: the signal |
| # handler is not called, and the signal is now pending |
| mask = signal.pthread_sigmask(signal.SIG_BLOCK, [signum]) |
| check_mask(mask) |
| kill(signum) |
| |
| # Check the new mask |
| blocked = read_sigmask() |
| check_mask(blocked) |
| if signum not in blocked: |
| raise Exception("%s not in %s" % (signum, blocked)) |
| if old_mask ^ blocked != {signum}: |
| raise Exception("%s ^ %s != {%s}" % (old_mask, blocked, signum)) |
| |
| # Unblock SIGUSR1 |
| try: |
| # unblock the pending signal calls immediately the signal handler |
| signal.pthread_sigmask(signal.SIG_UNBLOCK, [signum]) |
| except ZeroDivisionError: |
| pass |
| else: |
| raise Exception("ZeroDivisionError not raised") |
| try: |
| kill(signum) |
| except ZeroDivisionError: |
| pass |
| else: |
| raise Exception("ZeroDivisionError not raised") |
| |
| # Check the new mask |
| unblocked = read_sigmask() |
| if signum in unblocked: |
| raise Exception("%s in %s" % (signum, unblocked)) |
| if blocked ^ unblocked != {signum}: |
| raise Exception("%s ^ %s != {%s}" % (blocked, unblocked, signum)) |
| if old_mask != unblocked: |
| raise Exception("%s != %s" % (old_mask, unblocked)) |
| """ |
| assert_python_ok('-c', code) |
| |
| @unittest.skipIf(sys.platform == 'freebsd6', |
| "issue #12392: send a signal to the main thread doesn't work " |
| "before the creation of the first thread on FreeBSD 6") |
| @unittest.skipUnless(hasattr(signal, 'pthread_kill'), |
| 'need signal.pthread_kill()') |
| def test_pthread_kill_main_thread(self): |
| # Test that a signal can be sent to the main thread with pthread_kill() |
| # before any other thread has been created (see issue #12392). |
| code = """if True: |
| import threading |
| import signal |
| import sys |
| |
| def handler(signum, frame): |
| sys.exit(3) |
| |
| signal.signal(signal.SIGUSR1, handler) |
| signal.pthread_kill(threading.get_ident(), signal.SIGUSR1) |
| sys.exit(2) |
| """ |
| |
| with spawn_python('-c', code) as process: |
| stdout, stderr = process.communicate() |
| exitcode = process.wait() |
| if exitcode != 3: |
| raise Exception("Child error (exit code %s): %s" % |
| (exitcode, stdout)) |
| |
| |
| def test_main(): |
| try: |
| support.run_unittest(GenericTests, PosixTests, InterProcessSignalTests, |
| WakeupFDTests, WakeupSignalTests, |
| WakeupSocketSignalTests, |
| SiginterruptTest, ItimerTest, WindowsSignalTests, |
| PendingSignalsTests) |
| finally: |
| support.reap_children() |
| |
| |
| if __name__ == "__main__": |
| test_main() |