| :mod:`select` --- Waiting for I/O completion |
| ============================================ |
| |
| .. module:: select |
| :synopsis: Wait for I/O completion on multiple streams. |
| |
| |
| This module provides access to the :c:func:`select` and :c:func:`poll` functions |
| available in most operating systems, :c:func:`devpoll` available on |
| Solaris and derivatives, :c:func:`epoll` available on Linux 2.5+ and |
| :c:func:`kqueue` available on most BSD. |
| Note that on Windows, it only works for sockets; on other operating systems, |
| it also works for other file types (in particular, on Unix, it works on pipes). |
| It cannot be used on regular files to determine whether a file has grown since |
| it was last read. |
| |
| The module defines the following: |
| |
| |
| .. exception:: error |
| |
| A deprecated alias of :exc:`OSError`. |
| |
| .. versionchanged:: 3.3 |
| Following :pep:`3151`, this class was made an alias of :exc:`OSError`. |
| |
| |
| .. function:: devpoll() |
| |
| (Only supported on Solaris and derivatives.) Returns a ``/dev/poll`` |
| polling object; see section :ref:`devpoll-objects` below for the |
| methods supported by devpoll objects. |
| |
| :c:func:`devpoll` objects are linked to the number of file |
| descriptors allowed at the time of instantiation. If your program |
| reduces this value, :c:func:`devpoll` will fail. If your program |
| increases this value, :c:func:`devpoll` may return an |
| incomplete list of active file descriptors. |
| |
| .. versionadded:: 3.3 |
| |
| .. function:: epoll(sizehint=-1, flags=0) |
| |
| (Only supported on Linux 2.5.44 and newer.) Return an edge polling object, |
| which can be used as Edge or Level Triggered interface for I/O |
| events. *sizehint* is deprecated and completely ignored. *flags* can be set |
| to :const:`EPOLL_CLOEXEC`, which causes the epoll descriptor to be closed |
| automatically when :func:`os.execve` is called. See section |
| :ref:`epoll-objects` below for the methods supported by epolling objects. |
| They also support the :keyword:`with` statement. |
| |
| .. versionchanged:: 3.3 |
| Added the *flags* parameter. |
| |
| .. versionchanged:: 3.4 |
| Support for the :keyword:`with` statement was added. |
| |
| |
| .. function:: poll() |
| |
| (Not supported by all operating systems.) Returns a polling object, which |
| supports registering and unregistering file descriptors, and then polling them |
| for I/O events; see section :ref:`poll-objects` below for the methods supported |
| by polling objects. |
| |
| |
| .. function:: kqueue() |
| |
| (Only supported on BSD.) Returns a kernel queue object; see section |
| :ref:`kqueue-objects` below for the methods supported by kqueue objects. |
| |
| |
| .. function:: kevent(ident, filter=KQ_FILTER_READ, flags=KQ_EV_ADD, fflags=0, data=0, udata=0) |
| |
| (Only supported on BSD.) Returns a kernel event object; see section |
| :ref:`kevent-objects` below for the methods supported by kevent objects. |
| |
| |
| .. function:: select(rlist, wlist, xlist[, timeout]) |
| |
| This is a straightforward interface to the Unix :c:func:`select` system call. |
| The first three arguments are sequences of 'waitable objects': either |
| integers representing file descriptors or objects with a parameterless method |
| named :meth:`fileno` returning such an integer: |
| |
| * *rlist*: wait until ready for reading |
| * *wlist*: wait until ready for writing |
| * *xlist*: wait for an "exceptional condition" (see the manual page for what |
| your system considers such a condition) |
| |
| Empty sequences are allowed, but acceptance of three empty sequences is |
| platform-dependent. (It is known to work on Unix but not on Windows.) The |
| optional *timeout* argument specifies a time-out as a floating point number |
| in seconds. When the *timeout* argument is omitted the function blocks until |
| at least one file descriptor is ready. A time-out value of zero specifies a |
| poll and never blocks. |
| |
| The return value is a triple of lists of objects that are ready: subsets of the |
| first three arguments. When the time-out is reached without a file descriptor |
| becoming ready, three empty lists are returned. |
| |
| .. index:: |
| single: socket() (in module socket) |
| single: popen() (in module os) |
| |
| Among the acceptable object types in the sequences are Python :term:`file |
| objects <file object>` (e.g. ``sys.stdin``, or objects returned by |
| :func:`open` or :func:`os.popen`), socket objects returned by |
| :func:`socket.socket`. You may also define a :dfn:`wrapper` class yourself, |
| as long as it has an appropriate :meth:`fileno` method (that really returns |
| a file descriptor, not just a random integer). |
| |
| .. note:: |
| |
| .. index:: single: WinSock |
| |
| File objects on Windows are not acceptable, but sockets are. On Windows, |
| the underlying :c:func:`select` function is provided by the WinSock |
| library, and does not handle file descriptors that don't originate from |
| WinSock. |
| |
| .. attribute:: PIPE_BUF |
| |
| The minimum number of bytes which can be written without blocking to a pipe |
| when the pipe has been reported as ready for writing by :func:`select`, |
| :func:`poll` or another interface in this module. This doesn't apply |
| to other kind of file-like objects such as sockets. |
| |
| This value is guaranteed by POSIX to be at least 512. Availability: Unix. |
| |
| .. versionadded:: 3.2 |
| |
| |
| .. _devpoll-objects: |
| |
| ``/dev/poll`` Polling Objects |
| ---------------------------------------------- |
| |
| http://developers.sun.com/solaris/articles/using_devpoll.html |
| http://developers.sun.com/solaris/articles/polling_efficient.html |
| |
| Solaris and derivatives have ``/dev/poll``. While :c:func:`select` is |
| O(highest file descriptor) and :c:func:`poll` is O(number of file |
| descriptors), ``/dev/poll`` is O(active file descriptors). |
| |
| ``/dev/poll`` behaviour is very close to the standard :c:func:`poll` |
| object. |
| |
| |
| .. method:: devpoll.register(fd[, eventmask]) |
| |
| Register a file descriptor with the polling object. Future calls to the |
| :meth:`poll` method will then check whether the file descriptor has any pending |
| I/O events. *fd* can be either an integer, or an object with a :meth:`fileno` |
| method that returns an integer. File objects implement :meth:`fileno`, so they |
| can also be used as the argument. |
| |
| *eventmask* is an optional bitmask describing the type of events you want to |
| check for. The constants are the same that with :c:func:`poll` |
| object. The default value is a combination of the constants :const:`POLLIN`, |
| :const:`POLLPRI`, and :const:`POLLOUT`. |
| |
| .. warning:: |
| |
| Registering a file descriptor that's already registered is not an |
| error, but the result is undefined. The appropiate action is to |
| unregister or modify it first. This is an important difference |
| compared with :c:func:`poll`. |
| |
| |
| .. method:: devpoll.modify(fd[, eventmask]) |
| |
| This method does an :meth:`unregister` followed by a |
| :meth:`register`. It is (a bit) more efficient that doing the same |
| explicitly. |
| |
| |
| .. method:: devpoll.unregister(fd) |
| |
| Remove a file descriptor being tracked by a polling object. Just like the |
| :meth:`register` method, *fd* can be an integer or an object with a |
| :meth:`fileno` method that returns an integer. |
| |
| Attempting to remove a file descriptor that was never registered is |
| safely ignored. |
| |
| |
| .. method:: devpoll.poll([timeout]) |
| |
| Polls the set of registered file descriptors, and returns a possibly-empty list |
| containing ``(fd, event)`` 2-tuples for the descriptors that have events or |
| errors to report. *fd* is the file descriptor, and *event* is a bitmask with |
| bits set for the reported events for that descriptor --- :const:`POLLIN` for |
| waiting input, :const:`POLLOUT` to indicate that the descriptor can be written |
| to, and so forth. An empty list indicates that the call timed out and no file |
| descriptors had any events to report. If *timeout* is given, it specifies the |
| length of time in milliseconds which the system will wait for events before |
| returning. If *timeout* is omitted, -1, or :const:`None`, the call will |
| block until there is an event for this poll object. |
| |
| |
| .. _epoll-objects: |
| |
| Edge and Level Trigger Polling (epoll) Objects |
| ---------------------------------------------- |
| |
| http://linux.die.net/man/4/epoll |
| |
| *eventmask* |
| |
| +-----------------------+-----------------------------------------------+ |
| | Constant | Meaning | |
| +=======================+===============================================+ |
| | :const:`EPOLLIN` | Available for read | |
| +-----------------------+-----------------------------------------------+ |
| | :const:`EPOLLOUT` | Available for write | |
| +-----------------------+-----------------------------------------------+ |
| | :const:`EPOLLPRI` | Urgent data for read | |
| +-----------------------+-----------------------------------------------+ |
| | :const:`EPOLLERR` | Error condition happened on the assoc. fd | |
| +-----------------------+-----------------------------------------------+ |
| | :const:`EPOLLHUP` | Hang up happened on the assoc. fd | |
| +-----------------------+-----------------------------------------------+ |
| | :const:`EPOLLET` | Set Edge Trigger behavior, the default is | |
| | | Level Trigger behavior | |
| +-----------------------+-----------------------------------------------+ |
| | :const:`EPOLLONESHOT` | Set one-shot behavior. After one event is | |
| | | pulled out, the fd is internally disabled | |
| +-----------------------+-----------------------------------------------+ |
| | :const:`EPOLLRDNORM` | Equivalent to :const:`EPOLLIN` | |
| +-----------------------+-----------------------------------------------+ |
| | :const:`EPOLLRDBAND` | Priority data band can be read. | |
| +-----------------------+-----------------------------------------------+ |
| | :const:`EPOLLWRNORM` | Equivalent to :const:`EPOLLOUT` | |
| +-----------------------+-----------------------------------------------+ |
| | :const:`EPOLLWRBAND` | Priority data may be written. | |
| +-----------------------+-----------------------------------------------+ |
| | :const:`EPOLLMSG` | Ignored. | |
| +-----------------------+-----------------------------------------------+ |
| |
| |
| .. method:: epoll.close() |
| |
| Close the control file descriptor of the epoll object. |
| |
| |
| .. method:: epoll.fileno() |
| |
| Return the file descriptor number of the control fd. |
| |
| |
| .. method:: epoll.fromfd(fd) |
| |
| Create an epoll object from a given file descriptor. |
| |
| |
| .. method:: epoll.register(fd[, eventmask]) |
| |
| Register a fd descriptor with the epoll object. |
| |
| |
| .. method:: epoll.modify(fd, eventmask) |
| |
| Modify a register file descriptor. |
| |
| |
| .. method:: epoll.unregister(fd) |
| |
| Remove a registered file descriptor from the epoll object. |
| |
| |
| .. method:: epoll.poll(timeout=-1, maxevents=-1) |
| |
| Wait for events. timeout in seconds (float) |
| |
| |
| .. _poll-objects: |
| |
| Polling Objects |
| --------------- |
| |
| The :c:func:`poll` system call, supported on most Unix systems, provides better |
| scalability for network servers that service many, many clients at the same |
| time. :c:func:`poll` scales better because the system call only requires listing |
| the file descriptors of interest, while :c:func:`select` builds a bitmap, turns |
| on bits for the fds of interest, and then afterward the whole bitmap has to be |
| linearly scanned again. :c:func:`select` is O(highest file descriptor), while |
| :c:func:`poll` is O(number of file descriptors). |
| |
| |
| .. method:: poll.register(fd[, eventmask]) |
| |
| Register a file descriptor with the polling object. Future calls to the |
| :meth:`poll` method will then check whether the file descriptor has any pending |
| I/O events. *fd* can be either an integer, or an object with a :meth:`fileno` |
| method that returns an integer. File objects implement :meth:`fileno`, so they |
| can also be used as the argument. |
| |
| *eventmask* is an optional bitmask describing the type of events you want to |
| check for, and can be a combination of the constants :const:`POLLIN`, |
| :const:`POLLPRI`, and :const:`POLLOUT`, described in the table below. If not |
| specified, the default value used will check for all 3 types of events. |
| |
| +-------------------+------------------------------------------+ |
| | Constant | Meaning | |
| +===================+==========================================+ |
| | :const:`POLLIN` | There is data to read | |
| +-------------------+------------------------------------------+ |
| | :const:`POLLPRI` | There is urgent data to read | |
| +-------------------+------------------------------------------+ |
| | :const:`POLLOUT` | Ready for output: writing will not block | |
| +-------------------+------------------------------------------+ |
| | :const:`POLLERR` | Error condition of some sort | |
| +-------------------+------------------------------------------+ |
| | :const:`POLLHUP` | Hung up | |
| +-------------------+------------------------------------------+ |
| | :const:`POLLNVAL` | Invalid request: descriptor not open | |
| +-------------------+------------------------------------------+ |
| |
| Registering a file descriptor that's already registered is not an error, and has |
| the same effect as registering the descriptor exactly once. |
| |
| |
| .. method:: poll.modify(fd, eventmask) |
| |
| Modifies an already registered fd. This has the same effect as |
| ``register(fd, eventmask)``. Attempting to modify a file descriptor |
| that was never registered causes an :exc:`IOError` exception with errno |
| :const:`ENOENT` to be raised. |
| |
| |
| .. method:: poll.unregister(fd) |
| |
| Remove a file descriptor being tracked by a polling object. Just like the |
| :meth:`register` method, *fd* can be an integer or an object with a |
| :meth:`fileno` method that returns an integer. |
| |
| Attempting to remove a file descriptor that was never registered causes a |
| :exc:`KeyError` exception to be raised. |
| |
| |
| .. method:: poll.poll([timeout]) |
| |
| Polls the set of registered file descriptors, and returns a possibly-empty list |
| containing ``(fd, event)`` 2-tuples for the descriptors that have events or |
| errors to report. *fd* is the file descriptor, and *event* is a bitmask with |
| bits set for the reported events for that descriptor --- :const:`POLLIN` for |
| waiting input, :const:`POLLOUT` to indicate that the descriptor can be written |
| to, and so forth. An empty list indicates that the call timed out and no file |
| descriptors had any events to report. If *timeout* is given, it specifies the |
| length of time in milliseconds which the system will wait for events before |
| returning. If *timeout* is omitted, negative, or :const:`None`, the call will |
| block until there is an event for this poll object. |
| |
| |
| .. _kqueue-objects: |
| |
| Kqueue Objects |
| -------------- |
| |
| .. method:: kqueue.close() |
| |
| Close the control file descriptor of the kqueue object. |
| |
| |
| .. method:: kqueue.fileno() |
| |
| Return the file descriptor number of the control fd. |
| |
| |
| .. method:: kqueue.fromfd(fd) |
| |
| Create a kqueue object from a given file descriptor. |
| |
| |
| .. method:: kqueue.control(changelist, max_events[, timeout=None]) -> eventlist |
| |
| Low level interface to kevent |
| |
| - changelist must be an iterable of kevent object or None |
| - max_events must be 0 or a positive integer |
| - timeout in seconds (floats possible) |
| |
| |
| .. _kevent-objects: |
| |
| Kevent Objects |
| -------------- |
| |
| http://www.freebsd.org/cgi/man.cgi?query=kqueue&sektion=2 |
| |
| .. attribute:: kevent.ident |
| |
| Value used to identify the event. The interpretation depends on the filter |
| but it's usually the file descriptor. In the constructor ident can either |
| be an int or an object with a fileno() function. kevent stores the integer |
| internally. |
| |
| .. attribute:: kevent.filter |
| |
| Name of the kernel filter. |
| |
| +---------------------------+---------------------------------------------+ |
| | Constant | Meaning | |
| +===========================+=============================================+ |
| | :const:`KQ_FILTER_READ` | Takes a descriptor and returns whenever | |
| | | there is data available to read | |
| +---------------------------+---------------------------------------------+ |
| | :const:`KQ_FILTER_WRITE` | Takes a descriptor and returns whenever | |
| | | there is data available to write | |
| +---------------------------+---------------------------------------------+ |
| | :const:`KQ_FILTER_AIO` | AIO requests | |
| +---------------------------+---------------------------------------------+ |
| | :const:`KQ_FILTER_VNODE` | Returns when one or more of the requested | |
| | | events watched in *fflag* occurs | |
| +---------------------------+---------------------------------------------+ |
| | :const:`KQ_FILTER_PROC` | Watch for events on a process id | |
| +---------------------------+---------------------------------------------+ |
| | :const:`KQ_FILTER_NETDEV` | Watch for events on a network device | |
| | | [not available on Mac OS X] | |
| +---------------------------+---------------------------------------------+ |
| | :const:`KQ_FILTER_SIGNAL` | Returns whenever the watched signal is | |
| | | delivered to the process | |
| +---------------------------+---------------------------------------------+ |
| | :const:`KQ_FILTER_TIMER` | Establishes an arbitrary timer | |
| +---------------------------+---------------------------------------------+ |
| |
| .. attribute:: kevent.flags |
| |
| Filter action. |
| |
| +---------------------------+---------------------------------------------+ |
| | Constant | Meaning | |
| +===========================+=============================================+ |
| | :const:`KQ_EV_ADD` | Adds or modifies an event | |
| +---------------------------+---------------------------------------------+ |
| | :const:`KQ_EV_DELETE` | Removes an event from the queue | |
| +---------------------------+---------------------------------------------+ |
| | :const:`KQ_EV_ENABLE` | Permitscontrol() to returns the event | |
| +---------------------------+---------------------------------------------+ |
| | :const:`KQ_EV_DISABLE` | Disablesevent | |
| +---------------------------+---------------------------------------------+ |
| | :const:`KQ_EV_ONESHOT` | Removes event after first occurrence | |
| +---------------------------+---------------------------------------------+ |
| | :const:`KQ_EV_CLEAR` | Reset the state after an event is retrieved | |
| +---------------------------+---------------------------------------------+ |
| | :const:`KQ_EV_SYSFLAGS` | internal event | |
| +---------------------------+---------------------------------------------+ |
| | :const:`KQ_EV_FLAG1` | internal event | |
| +---------------------------+---------------------------------------------+ |
| | :const:`KQ_EV_EOF` | Filter specific EOF condition | |
| +---------------------------+---------------------------------------------+ |
| | :const:`KQ_EV_ERROR` | See return values | |
| +---------------------------+---------------------------------------------+ |
| |
| |
| .. attribute:: kevent.fflags |
| |
| Filter specific flags. |
| |
| :const:`KQ_FILTER_READ` and :const:`KQ_FILTER_WRITE` filter flags: |
| |
| +----------------------------+--------------------------------------------+ |
| | Constant | Meaning | |
| +============================+============================================+ |
| | :const:`KQ_NOTE_LOWAT` | low water mark of a socket buffer | |
| +----------------------------+--------------------------------------------+ |
| |
| :const:`KQ_FILTER_VNODE` filter flags: |
| |
| +----------------------------+--------------------------------------------+ |
| | Constant | Meaning | |
| +============================+============================================+ |
| | :const:`KQ_NOTE_DELETE` | *unlink()* was called | |
| +----------------------------+--------------------------------------------+ |
| | :const:`KQ_NOTE_WRITE` | a write occurred | |
| +----------------------------+--------------------------------------------+ |
| | :const:`KQ_NOTE_EXTEND` | the file was extended | |
| +----------------------------+--------------------------------------------+ |
| | :const:`KQ_NOTE_ATTRIB` | an attribute was changed | |
| +----------------------------+--------------------------------------------+ |
| | :const:`KQ_NOTE_LINK` | the link count has changed | |
| +----------------------------+--------------------------------------------+ |
| | :const:`KQ_NOTE_RENAME` | the file was renamed | |
| +----------------------------+--------------------------------------------+ |
| | :const:`KQ_NOTE_REVOKE` | access to the file was revoked | |
| +----------------------------+--------------------------------------------+ |
| |
| :const:`KQ_FILTER_PROC` filter flags: |
| |
| +----------------------------+--------------------------------------------+ |
| | Constant | Meaning | |
| +============================+============================================+ |
| | :const:`KQ_NOTE_EXIT` | the process has exited | |
| +----------------------------+--------------------------------------------+ |
| | :const:`KQ_NOTE_FORK` | the process has called *fork()* | |
| +----------------------------+--------------------------------------------+ |
| | :const:`KQ_NOTE_EXEC` | the process has executed a new process | |
| +----------------------------+--------------------------------------------+ |
| | :const:`KQ_NOTE_PCTRLMASK` | internal filter flag | |
| +----------------------------+--------------------------------------------+ |
| | :const:`KQ_NOTE_PDATAMASK` | internal filter flag | |
| +----------------------------+--------------------------------------------+ |
| | :const:`KQ_NOTE_TRACK` | follow a process across *fork()* | |
| +----------------------------+--------------------------------------------+ |
| | :const:`KQ_NOTE_CHILD` | returned on the child process for | |
| | | *NOTE_TRACK* | |
| +----------------------------+--------------------------------------------+ |
| | :const:`KQ_NOTE_TRACKERR` | unable to attach to a child | |
| +----------------------------+--------------------------------------------+ |
| |
| :const:`KQ_FILTER_NETDEV` filter flags (not available on Mac OS X): |
| |
| +----------------------------+--------------------------------------------+ |
| | Constant | Meaning | |
| +============================+============================================+ |
| | :const:`KQ_NOTE_LINKUP` | link is up | |
| +----------------------------+--------------------------------------------+ |
| | :const:`KQ_NOTE_LINKDOWN` | link is down | |
| +----------------------------+--------------------------------------------+ |
| | :const:`KQ_NOTE_LINKINV` | link state is invalid | |
| +----------------------------+--------------------------------------------+ |
| |
| |
| .. attribute:: kevent.data |
| |
| Filter specific data. |
| |
| |
| .. attribute:: kevent.udata |
| |
| User defined value. |