| :mod:`tokenize` --- Tokenizer for Python source |
| =============================================== |
| |
| .. module:: tokenize |
| :synopsis: Lexical scanner for Python source code. |
| .. moduleauthor:: Ka Ping Yee |
| .. sectionauthor:: Fred L. Drake, Jr. <fdrake@acm.org> |
| |
| **Source code:** :source:`Lib/tokenize.py` |
| |
| -------------- |
| |
| The :mod:`tokenize` module provides a lexical scanner for Python source code, |
| implemented in Python. The scanner in this module returns comments as tokens |
| as well, making it useful for implementing "pretty-printers," including |
| colorizers for on-screen displays. |
| |
| To simplify token stream handling, all :ref:`operators` and :ref:`delimiters` |
| tokens are returned using the generic :data:`token.OP` token type. The exact |
| type can be determined by checking the ``exact_type`` property on the |
| :term:`named tuple` returned from :func:`tokenize.tokenize`. |
| |
| Tokenizing Input |
| ---------------- |
| |
| The primary entry point is a :term:`generator`: |
| |
| .. function:: tokenize(readline) |
| |
| The :func:`.tokenize` generator requires one argument, *readline*, which |
| must be a callable object which provides the same interface as the |
| :meth:`io.IOBase.readline` method of file objects. Each call to the |
| function should return one line of input as bytes. |
| |
| The generator produces 5-tuples with these members: the token type; the |
| token string; a 2-tuple ``(srow, scol)`` of ints specifying the row and |
| column where the token begins in the source; a 2-tuple ``(erow, ecol)`` of |
| ints specifying the row and column where the token ends in the source; and |
| the line on which the token was found. The line passed (the last tuple item) |
| is the *logical* line; continuation lines are included. The 5 tuple is |
| returned as a :term:`named tuple` with the field names: |
| ``type string start end line``. |
| |
| The returned :term:`named tuple` has an additional property named |
| ``exact_type`` that contains the exact operator type for |
| :data:`token.OP` tokens. For all other token types ``exact_type`` |
| equals the named tuple ``type`` field. |
| |
| .. versionchanged:: 3.1 |
| Added support for named tuples. |
| |
| .. versionchanged:: 3.3 |
| Added support for ``exact_type``. |
| |
| :func:`.tokenize` determines the source encoding of the file by looking for a |
| UTF-8 BOM or encoding cookie, according to :pep:`263`. |
| |
| |
| All constants from the :mod:`token` module are also exported from |
| :mod:`tokenize`, as are three additional token type values: |
| |
| .. data:: COMMENT |
| |
| Token value used to indicate a comment. |
| |
| |
| .. data:: NL |
| |
| Token value used to indicate a non-terminating newline. The NEWLINE token |
| indicates the end of a logical line of Python code; NL tokens are generated |
| when a logical line of code is continued over multiple physical lines. |
| |
| |
| .. data:: ENCODING |
| |
| Token value that indicates the encoding used to decode the source bytes |
| into text. The first token returned by :func:`.tokenize` will always be an |
| ENCODING token. |
| |
| |
| Another function is provided to reverse the tokenization process. This is |
| useful for creating tools that tokenize a script, modify the token stream, and |
| write back the modified script. |
| |
| |
| .. function:: untokenize(iterable) |
| |
| Converts tokens back into Python source code. The *iterable* must return |
| sequences with at least two elements, the token type and the token string. |
| Any additional sequence elements are ignored. |
| |
| The reconstructed script is returned as a single string. The result is |
| guaranteed to tokenize back to match the input so that the conversion is |
| lossless and round-trips are assured. The guarantee applies only to the |
| token type and token string as the spacing between tokens (column |
| positions) may change. |
| |
| It returns bytes, encoded using the ENCODING token, which is the first |
| token sequence output by :func:`.tokenize`. |
| |
| |
| :func:`.tokenize` needs to detect the encoding of source files it tokenizes. The |
| function it uses to do this is available: |
| |
| .. function:: detect_encoding(readline) |
| |
| The :func:`detect_encoding` function is used to detect the encoding that |
| should be used to decode a Python source file. It requires one argument, |
| readline, in the same way as the :func:`.tokenize` generator. |
| |
| It will call readline a maximum of twice, and return the encoding used |
| (as a string) and a list of any lines (not decoded from bytes) it has read |
| in. |
| |
| It detects the encoding from the presence of a UTF-8 BOM or an encoding |
| cookie as specified in :pep:`263`. If both a BOM and a cookie are present, |
| but disagree, a SyntaxError will be raised. Note that if the BOM is found, |
| ``'utf-8-sig'`` will be returned as an encoding. |
| |
| If no encoding is specified, then the default of ``'utf-8'`` will be |
| returned. |
| |
| Use :func:`.open` to open Python source files: it uses |
| :func:`detect_encoding` to detect the file encoding. |
| |
| |
| .. function:: open(filename) |
| |
| Open a file in read only mode using the encoding detected by |
| :func:`detect_encoding`. |
| |
| .. versionadded:: 3.2 |
| |
| .. exception:: TokenError |
| |
| Raised when either a docstring or expression that may be split over several |
| lines is not completed anywhere in the file, for example:: |
| |
| """Beginning of |
| docstring |
| |
| or:: |
| |
| [1, |
| 2, |
| 3 |
| |
| Note that unclosed single-quoted strings do not cause an error to be |
| raised. They are tokenized as ``ERRORTOKEN``, followed by the tokenization of |
| their contents. |
| |
| |
| .. _tokenize-cli: |
| |
| Command-Line Usage |
| ------------------ |
| |
| .. versionadded:: 3.3 |
| |
| The :mod:`tokenize` module can be executed as a script from the command line. |
| It is as simple as: |
| |
| .. code-block:: sh |
| |
| python -m tokenize [-e] [filename.py] |
| |
| The following options are accepted: |
| |
| .. program:: tokenize |
| |
| .. cmdoption:: -h, --help |
| |
| show this help message and exit |
| |
| .. cmdoption:: -e, --exact |
| |
| display token names using the exact type |
| |
| If :file:`filename.py` is specified its contents are tokenized to stdout. |
| Otherwise, tokenization is performed on stdin. |
| |
| Examples |
| ------------------ |
| |
| Example of a script rewriter that transforms float literals into Decimal |
| objects:: |
| |
| from tokenize import tokenize, untokenize, NUMBER, STRING, NAME, OP |
| from io import BytesIO |
| |
| def decistmt(s): |
| """Substitute Decimals for floats in a string of statements. |
| |
| >>> from decimal import Decimal |
| >>> s = 'print(+21.3e-5*-.1234/81.7)' |
| >>> decistmt(s) |
| "print (+Decimal ('21.3e-5')*-Decimal ('.1234')/Decimal ('81.7'))" |
| |
| The format of the exponent is inherited from the platform C library. |
| Known cases are "e-007" (Windows) and "e-07" (not Windows). Since |
| we're only showing 12 digits, and the 13th isn't close to 5, the |
| rest of the output should be platform-independent. |
| |
| >>> exec(s) #doctest: +ELLIPSIS |
| -3.21716034272e-0...7 |
| |
| Output from calculations with Decimal should be identical across all |
| platforms. |
| |
| >>> exec(decistmt(s)) |
| -3.217160342717258261933904529E-7 |
| """ |
| result = [] |
| g = tokenize(BytesIO(s.encode('utf-8')).readline) # tokenize the string |
| for toknum, tokval, _, _, _ in g: |
| if toknum == NUMBER and '.' in tokval: # replace NUMBER tokens |
| result.extend([ |
| (NAME, 'Decimal'), |
| (OP, '('), |
| (STRING, repr(tokval)), |
| (OP, ')') |
| ]) |
| else: |
| result.append((toknum, tokval)) |
| return untokenize(result).decode('utf-8') |
| |
| Example of tokenizing from the command line. The script:: |
| |
| def say_hello(): |
| print("Hello, World!") |
| |
| say_hello() |
| |
| will be tokenized to the following output where the first column is the range |
| of the line/column coordinates where the token is found, the second column is |
| the name of the token, and the final column is the value of the token (if any) |
| |
| .. code-block:: sh |
| |
| $ python -m tokenize hello.py |
| 0,0-0,0: ENCODING 'utf-8' |
| 1,0-1,3: NAME 'def' |
| 1,4-1,13: NAME 'say_hello' |
| 1,13-1,14: OP '(' |
| 1,14-1,15: OP ')' |
| 1,15-1,16: OP ':' |
| 1,16-1,17: NEWLINE '\n' |
| 2,0-2,4: INDENT ' ' |
| 2,4-2,9: NAME 'print' |
| 2,9-2,10: OP '(' |
| 2,10-2,25: STRING '"Hello, World!"' |
| 2,25-2,26: OP ')' |
| 2,26-2,27: NEWLINE '\n' |
| 3,0-3,1: NL '\n' |
| 4,0-4,0: DEDENT '' |
| 4,0-4,9: NAME 'say_hello' |
| 4,9-4,10: OP '(' |
| 4,10-4,11: OP ')' |
| 4,11-4,12: NEWLINE '\n' |
| 5,0-5,0: ENDMARKER '' |
| |
| The exact token type names can be displayed using the ``-e`` option: |
| |
| .. code-block:: sh |
| |
| $ python -m tokenize -e hello.py |
| 0,0-0,0: ENCODING 'utf-8' |
| 1,0-1,3: NAME 'def' |
| 1,4-1,13: NAME 'say_hello' |
| 1,13-1,14: LPAR '(' |
| 1,14-1,15: RPAR ')' |
| 1,15-1,16: COLON ':' |
| 1,16-1,17: NEWLINE '\n' |
| 2,0-2,4: INDENT ' ' |
| 2,4-2,9: NAME 'print' |
| 2,9-2,10: LPAR '(' |
| 2,10-2,25: STRING '"Hello, World!"' |
| 2,25-2,26: RPAR ')' |
| 2,26-2,27: NEWLINE '\n' |
| 3,0-3,1: NL '\n' |
| 4,0-4,0: DEDENT '' |
| 4,0-4,9: NAME 'say_hello' |
| 4,9-4,10: LPAR '(' |
| 4,10-4,11: RPAR ')' |
| 4,11-4,12: NEWLINE '\n' |
| 5,0-5,0: ENDMARKER '' |