| """ |
| Python implementation of the io module. |
| """ |
| |
| import os |
| import abc |
| import codecs |
| import errno |
| import array |
| # Import _thread instead of threading to reduce startup cost |
| try: |
| from _thread import allocate_lock as Lock |
| except ImportError: |
| from _dummy_thread import allocate_lock as Lock |
| |
| import io |
| from io import (__all__, SEEK_SET, SEEK_CUR, SEEK_END) |
| |
| valid_seek_flags = {0, 1, 2} # Hardwired values |
| if hasattr(os, 'SEEK_HOLE') : |
| valid_seek_flags.add(os.SEEK_HOLE) |
| valid_seek_flags.add(os.SEEK_DATA) |
| |
| # open() uses st_blksize whenever we can |
| DEFAULT_BUFFER_SIZE = 8 * 1024 # bytes |
| |
| # NOTE: Base classes defined here are registered with the "official" ABCs |
| # defined in io.py. We don't use real inheritance though, because we don't |
| # want to inherit the C implementations. |
| |
| # Rebind for compatibility |
| BlockingIOError = BlockingIOError |
| |
| |
| def open(file, mode="r", buffering=-1, encoding=None, errors=None, |
| newline=None, closefd=True, opener=None): |
| |
| r"""Open file and return a stream. Raise OSError upon failure. |
| |
| file is either a text or byte string giving the name (and the path |
| if the file isn't in the current working directory) of the file to |
| be opened or an integer file descriptor of the file to be |
| wrapped. (If a file descriptor is given, it is closed when the |
| returned I/O object is closed, unless closefd is set to False.) |
| |
| mode is an optional string that specifies the mode in which the file is |
| opened. It defaults to 'r' which means open for reading in text mode. Other |
| common values are 'w' for writing (truncating the file if it already |
| exists), 'x' for exclusive creation of a new file, and 'a' for appending |
| (which on some Unix systems, means that all writes append to the end of the |
| file regardless of the current seek position). In text mode, if encoding is |
| not specified the encoding used is platform dependent. (For reading and |
| writing raw bytes use binary mode and leave encoding unspecified.) The |
| available modes are: |
| |
| ========= =============================================================== |
| Character Meaning |
| --------- --------------------------------------------------------------- |
| 'r' open for reading (default) |
| 'w' open for writing, truncating the file first |
| 'x' create a new file and open it for writing |
| 'a' open for writing, appending to the end of the file if it exists |
| 'b' binary mode |
| 't' text mode (default) |
| '+' open a disk file for updating (reading and writing) |
| 'U' universal newline mode (deprecated) |
| ========= =============================================================== |
| |
| The default mode is 'rt' (open for reading text). For binary random |
| access, the mode 'w+b' opens and truncates the file to 0 bytes, while |
| 'r+b' opens the file without truncation. The 'x' mode implies 'w' and |
| raises an `FileExistsError` if the file already exists. |
| |
| Python distinguishes between files opened in binary and text modes, |
| even when the underlying operating system doesn't. Files opened in |
| binary mode (appending 'b' to the mode argument) return contents as |
| bytes objects without any decoding. In text mode (the default, or when |
| 't' is appended to the mode argument), the contents of the file are |
| returned as strings, the bytes having been first decoded using a |
| platform-dependent encoding or using the specified encoding if given. |
| |
| 'U' mode is deprecated and will raise an exception in future versions |
| of Python. It has no effect in Python 3. Use newline to control |
| universal newlines mode. |
| |
| buffering is an optional integer used to set the buffering policy. |
| Pass 0 to switch buffering off (only allowed in binary mode), 1 to select |
| line buffering (only usable in text mode), and an integer > 1 to indicate |
| the size of a fixed-size chunk buffer. When no buffering argument is |
| given, the default buffering policy works as follows: |
| |
| * Binary files are buffered in fixed-size chunks; the size of the buffer |
| is chosen using a heuristic trying to determine the underlying device's |
| "block size" and falling back on `io.DEFAULT_BUFFER_SIZE`. |
| On many systems, the buffer will typically be 4096 or 8192 bytes long. |
| |
| * "Interactive" text files (files for which isatty() returns True) |
| use line buffering. Other text files use the policy described above |
| for binary files. |
| |
| encoding is the str name of the encoding used to decode or encode the |
| file. This should only be used in text mode. The default encoding is |
| platform dependent, but any encoding supported by Python can be |
| passed. See the codecs module for the list of supported encodings. |
| |
| errors is an optional string that specifies how encoding errors are to |
| be handled---this argument should not be used in binary mode. Pass |
| 'strict' to raise a ValueError exception if there is an encoding error |
| (the default of None has the same effect), or pass 'ignore' to ignore |
| errors. (Note that ignoring encoding errors can lead to data loss.) |
| See the documentation for codecs.register for a list of the permitted |
| encoding error strings. |
| |
| newline is a string controlling how universal newlines works (it only |
| applies to text mode). It can be None, '', '\n', '\r', and '\r\n'. It works |
| as follows: |
| |
| * On input, if newline is None, universal newlines mode is |
| enabled. Lines in the input can end in '\n', '\r', or '\r\n', and |
| these are translated into '\n' before being returned to the |
| caller. If it is '', universal newline mode is enabled, but line |
| endings are returned to the caller untranslated. If it has any of |
| the other legal values, input lines are only terminated by the given |
| string, and the line ending is returned to the caller untranslated. |
| |
| * On output, if newline is None, any '\n' characters written are |
| translated to the system default line separator, os.linesep. If |
| newline is '', no translation takes place. If newline is any of the |
| other legal values, any '\n' characters written are translated to |
| the given string. |
| |
| closedfd is a bool. If closefd is False, the underlying file descriptor will |
| be kept open when the file is closed. This does not work when a file name is |
| given and must be True in that case. |
| |
| The newly created file is non-inheritable. |
| |
| A custom opener can be used by passing a callable as *opener*. The |
| underlying file descriptor for the file object is then obtained by calling |
| *opener* with (*file*, *flags*). *opener* must return an open file |
| descriptor (passing os.open as *opener* results in functionality similar to |
| passing None). |
| |
| open() returns a file object whose type depends on the mode, and |
| through which the standard file operations such as reading and writing |
| are performed. When open() is used to open a file in a text mode ('w', |
| 'r', 'wt', 'rt', etc.), it returns a TextIOWrapper. When used to open |
| a file in a binary mode, the returned class varies: in read binary |
| mode, it returns a BufferedReader; in write binary and append binary |
| modes, it returns a BufferedWriter, and in read/write mode, it returns |
| a BufferedRandom. |
| |
| It is also possible to use a string or bytearray as a file for both |
| reading and writing. For strings StringIO can be used like a file |
| opened in a text mode, and for bytes a BytesIO can be used like a file |
| opened in a binary mode. |
| """ |
| if not isinstance(file, (str, bytes, int)): |
| raise TypeError("invalid file: %r" % file) |
| if not isinstance(mode, str): |
| raise TypeError("invalid mode: %r" % mode) |
| if not isinstance(buffering, int): |
| raise TypeError("invalid buffering: %r" % buffering) |
| if encoding is not None and not isinstance(encoding, str): |
| raise TypeError("invalid encoding: %r" % encoding) |
| if errors is not None and not isinstance(errors, str): |
| raise TypeError("invalid errors: %r" % errors) |
| modes = set(mode) |
| if modes - set("axrwb+tU") or len(mode) > len(modes): |
| raise ValueError("invalid mode: %r" % mode) |
| creating = "x" in modes |
| reading = "r" in modes |
| writing = "w" in modes |
| appending = "a" in modes |
| updating = "+" in modes |
| text = "t" in modes |
| binary = "b" in modes |
| if "U" in modes: |
| if creating or writing or appending: |
| raise ValueError("can't use U and writing mode at once") |
| import warnings |
| warnings.warn("'U' mode is deprecated", |
| DeprecationWarning, 2) |
| reading = True |
| if text and binary: |
| raise ValueError("can't have text and binary mode at once") |
| if creating + reading + writing + appending > 1: |
| raise ValueError("can't have read/write/append mode at once") |
| if not (creating or reading or writing or appending): |
| raise ValueError("must have exactly one of read/write/append mode") |
| if binary and encoding is not None: |
| raise ValueError("binary mode doesn't take an encoding argument") |
| if binary and errors is not None: |
| raise ValueError("binary mode doesn't take an errors argument") |
| if binary and newline is not None: |
| raise ValueError("binary mode doesn't take a newline argument") |
| raw = FileIO(file, |
| (creating and "x" or "") + |
| (reading and "r" or "") + |
| (writing and "w" or "") + |
| (appending and "a" or "") + |
| (updating and "+" or ""), |
| closefd, opener=opener) |
| result = raw |
| try: |
| line_buffering = False |
| if buffering == 1 or buffering < 0 and raw.isatty(): |
| buffering = -1 |
| line_buffering = True |
| if buffering < 0: |
| buffering = DEFAULT_BUFFER_SIZE |
| try: |
| bs = os.fstat(raw.fileno()).st_blksize |
| except (OSError, AttributeError): |
| pass |
| else: |
| if bs > 1: |
| buffering = bs |
| if buffering < 0: |
| raise ValueError("invalid buffering size") |
| if buffering == 0: |
| if binary: |
| return result |
| raise ValueError("can't have unbuffered text I/O") |
| if updating: |
| buffer = BufferedRandom(raw, buffering) |
| elif creating or writing or appending: |
| buffer = BufferedWriter(raw, buffering) |
| elif reading: |
| buffer = BufferedReader(raw, buffering) |
| else: |
| raise ValueError("unknown mode: %r" % mode) |
| result = buffer |
| if binary: |
| return result |
| text = TextIOWrapper(buffer, encoding, errors, newline, line_buffering) |
| result = text |
| text.mode = mode |
| return result |
| except: |
| result.close() |
| raise |
| |
| |
| class DocDescriptor: |
| """Helper for builtins.open.__doc__ |
| """ |
| def __get__(self, obj, typ): |
| return ( |
| "open(file, mode='r', buffering=-1, encoding=None, " |
| "errors=None, newline=None, closefd=True)\n\n" + |
| open.__doc__) |
| |
| class OpenWrapper: |
| """Wrapper for builtins.open |
| |
| Trick so that open won't become a bound method when stored |
| as a class variable (as dbm.dumb does). |
| |
| See initstdio() in Python/pylifecycle.c. |
| """ |
| __doc__ = DocDescriptor() |
| |
| def __new__(cls, *args, **kwargs): |
| return open(*args, **kwargs) |
| |
| |
| # In normal operation, both `UnsupportedOperation`s should be bound to the |
| # same object. |
| try: |
| UnsupportedOperation = io.UnsupportedOperation |
| except AttributeError: |
| class UnsupportedOperation(ValueError, OSError): |
| pass |
| |
| |
| class IOBase(metaclass=abc.ABCMeta): |
| |
| """The abstract base class for all I/O classes, acting on streams of |
| bytes. There is no public constructor. |
| |
| This class provides dummy implementations for many methods that |
| derived classes can override selectively; the default implementations |
| represent a file that cannot be read, written or seeked. |
| |
| Even though IOBase does not declare read, readinto, or write because |
| their signatures will vary, implementations and clients should |
| consider those methods part of the interface. Also, implementations |
| may raise UnsupportedOperation when operations they do not support are |
| called. |
| |
| The basic type used for binary data read from or written to a file is |
| bytes. bytearrays are accepted too, and in some cases (such as |
| readinto) needed. Text I/O classes work with str data. |
| |
| Note that calling any method (even inquiries) on a closed stream is |
| undefined. Implementations may raise OSError in this case. |
| |
| IOBase (and its subclasses) support the iterator protocol, meaning |
| that an IOBase object can be iterated over yielding the lines in a |
| stream. |
| |
| IOBase also supports the :keyword:`with` statement. In this example, |
| fp is closed after the suite of the with statement is complete: |
| |
| with open('spam.txt', 'r') as fp: |
| fp.write('Spam and eggs!') |
| """ |
| |
| ### Internal ### |
| |
| def _unsupported(self, name): |
| """Internal: raise an OSError exception for unsupported operations.""" |
| raise UnsupportedOperation("%s.%s() not supported" % |
| (self.__class__.__name__, name)) |
| |
| ### Positioning ### |
| |
| def seek(self, pos, whence=0): |
| """Change stream position. |
| |
| Change the stream position to byte offset pos. Argument pos is |
| interpreted relative to the position indicated by whence. Values |
| for whence are ints: |
| |
| * 0 -- start of stream (the default); offset should be zero or positive |
| * 1 -- current stream position; offset may be negative |
| * 2 -- end of stream; offset is usually negative |
| Some operating systems / file systems could provide additional values. |
| |
| Return an int indicating the new absolute position. |
| """ |
| self._unsupported("seek") |
| |
| def tell(self): |
| """Return an int indicating the current stream position.""" |
| return self.seek(0, 1) |
| |
| def truncate(self, pos=None): |
| """Truncate file to size bytes. |
| |
| Size defaults to the current IO position as reported by tell(). Return |
| the new size. |
| """ |
| self._unsupported("truncate") |
| |
| ### Flush and close ### |
| |
| def flush(self): |
| """Flush write buffers, if applicable. |
| |
| This is not implemented for read-only and non-blocking streams. |
| """ |
| self._checkClosed() |
| # XXX Should this return the number of bytes written??? |
| |
| __closed = False |
| |
| def close(self): |
| """Flush and close the IO object. |
| |
| This method has no effect if the file is already closed. |
| """ |
| if not self.__closed: |
| try: |
| self.flush() |
| finally: |
| self.__closed = True |
| |
| def __del__(self): |
| """Destructor. Calls close().""" |
| # The try/except block is in case this is called at program |
| # exit time, when it's possible that globals have already been |
| # deleted, and then the close() call might fail. Since |
| # there's nothing we can do about such failures and they annoy |
| # the end users, we suppress the traceback. |
| try: |
| self.close() |
| except: |
| pass |
| |
| ### Inquiries ### |
| |
| def seekable(self): |
| """Return a bool indicating whether object supports random access. |
| |
| If False, seek(), tell() and truncate() will raise UnsupportedOperation. |
| This method may need to do a test seek(). |
| """ |
| return False |
| |
| def _checkSeekable(self, msg=None): |
| """Internal: raise UnsupportedOperation if file is not seekable |
| """ |
| if not self.seekable(): |
| raise UnsupportedOperation("File or stream is not seekable." |
| if msg is None else msg) |
| |
| def readable(self): |
| """Return a bool indicating whether object was opened for reading. |
| |
| If False, read() will raise UnsupportedOperation. |
| """ |
| return False |
| |
| def _checkReadable(self, msg=None): |
| """Internal: raise UnsupportedOperation if file is not readable |
| """ |
| if not self.readable(): |
| raise UnsupportedOperation("File or stream is not readable." |
| if msg is None else msg) |
| |
| def writable(self): |
| """Return a bool indicating whether object was opened for writing. |
| |
| If False, write() and truncate() will raise UnsupportedOperation. |
| """ |
| return False |
| |
| def _checkWritable(self, msg=None): |
| """Internal: raise UnsupportedOperation if file is not writable |
| """ |
| if not self.writable(): |
| raise UnsupportedOperation("File or stream is not writable." |
| if msg is None else msg) |
| |
| @property |
| def closed(self): |
| """closed: bool. True iff the file has been closed. |
| |
| For backwards compatibility, this is a property, not a predicate. |
| """ |
| return self.__closed |
| |
| def _checkClosed(self, msg=None): |
| """Internal: raise an ValueError if file is closed |
| """ |
| if self.closed: |
| raise ValueError("I/O operation on closed file." |
| if msg is None else msg) |
| |
| ### Context manager ### |
| |
| def __enter__(self): # That's a forward reference |
| """Context management protocol. Returns self (an instance of IOBase).""" |
| self._checkClosed() |
| return self |
| |
| def __exit__(self, *args): |
| """Context management protocol. Calls close()""" |
| self.close() |
| |
| ### Lower-level APIs ### |
| |
| # XXX Should these be present even if unimplemented? |
| |
| def fileno(self): |
| """Returns underlying file descriptor (an int) if one exists. |
| |
| An OSError is raised if the IO object does not use a file descriptor. |
| """ |
| self._unsupported("fileno") |
| |
| def isatty(self): |
| """Return a bool indicating whether this is an 'interactive' stream. |
| |
| Return False if it can't be determined. |
| """ |
| self._checkClosed() |
| return False |
| |
| ### Readline[s] and writelines ### |
| |
| def readline(self, size=-1): |
| r"""Read and return a line of bytes from the stream. |
| |
| If size is specified, at most size bytes will be read. |
| Size should be an int. |
| |
| The line terminator is always b'\n' for binary files; for text |
| files, the newlines argument to open can be used to select the line |
| terminator(s) recognized. |
| """ |
| # For backwards compatibility, a (slowish) readline(). |
| if hasattr(self, "peek"): |
| def nreadahead(): |
| readahead = self.peek(1) |
| if not readahead: |
| return 1 |
| n = (readahead.find(b"\n") + 1) or len(readahead) |
| if size >= 0: |
| n = min(n, size) |
| return n |
| else: |
| def nreadahead(): |
| return 1 |
| if size is None: |
| size = -1 |
| elif not isinstance(size, int): |
| raise TypeError("size must be an integer") |
| res = bytearray() |
| while size < 0 or len(res) < size: |
| b = self.read(nreadahead()) |
| if not b: |
| break |
| res += b |
| if res.endswith(b"\n"): |
| break |
| return bytes(res) |
| |
| def __iter__(self): |
| self._checkClosed() |
| return self |
| |
| def __next__(self): |
| line = self.readline() |
| if not line: |
| raise StopIteration |
| return line |
| |
| def readlines(self, hint=None): |
| """Return a list of lines from the stream. |
| |
| hint can be specified to control the number of lines read: no more |
| lines will be read if the total size (in bytes/characters) of all |
| lines so far exceeds hint. |
| """ |
| if hint is None or hint <= 0: |
| return list(self) |
| n = 0 |
| lines = [] |
| for line in self: |
| lines.append(line) |
| n += len(line) |
| if n >= hint: |
| break |
| return lines |
| |
| def writelines(self, lines): |
| self._checkClosed() |
| for line in lines: |
| self.write(line) |
| |
| io.IOBase.register(IOBase) |
| |
| |
| class RawIOBase(IOBase): |
| |
| """Base class for raw binary I/O.""" |
| |
| # The read() method is implemented by calling readinto(); derived |
| # classes that want to support read() only need to implement |
| # readinto() as a primitive operation. In general, readinto() can be |
| # more efficient than read(). |
| |
| # (It would be tempting to also provide an implementation of |
| # readinto() in terms of read(), in case the latter is a more suitable |
| # primitive operation, but that would lead to nasty recursion in case |
| # a subclass doesn't implement either.) |
| |
| def read(self, size=-1): |
| """Read and return up to size bytes, where size is an int. |
| |
| Returns an empty bytes object on EOF, or None if the object is |
| set not to block and has no data to read. |
| """ |
| if size is None: |
| size = -1 |
| if size < 0: |
| return self.readall() |
| b = bytearray(size.__index__()) |
| n = self.readinto(b) |
| if n is None: |
| return None |
| del b[n:] |
| return bytes(b) |
| |
| def readall(self): |
| """Read until EOF, using multiple read() call.""" |
| res = bytearray() |
| while True: |
| data = self.read(DEFAULT_BUFFER_SIZE) |
| if not data: |
| break |
| res += data |
| if res: |
| return bytes(res) |
| else: |
| # b'' or None |
| return data |
| |
| def readinto(self, b): |
| """Read up to len(b) bytes into bytearray b. |
| |
| Returns an int representing the number of bytes read (0 for EOF), or |
| None if the object is set not to block and has no data to read. |
| """ |
| self._unsupported("readinto") |
| |
| def write(self, b): |
| """Write the given buffer to the IO stream. |
| |
| Returns the number of bytes written, which may be less than len(b). |
| """ |
| self._unsupported("write") |
| |
| io.RawIOBase.register(RawIOBase) |
| from _io import FileIO |
| RawIOBase.register(FileIO) |
| |
| |
| class BufferedIOBase(IOBase): |
| |
| """Base class for buffered IO objects. |
| |
| The main difference with RawIOBase is that the read() method |
| supports omitting the size argument, and does not have a default |
| implementation that defers to readinto(). |
| |
| In addition, read(), readinto() and write() may raise |
| BlockingIOError if the underlying raw stream is in non-blocking |
| mode and not ready; unlike their raw counterparts, they will never |
| return None. |
| |
| A typical implementation should not inherit from a RawIOBase |
| implementation, but wrap one. |
| """ |
| |
| def read(self, size=None): |
| """Read and return up to size bytes, where size is an int. |
| |
| If the argument is omitted, None, or negative, reads and |
| returns all data until EOF. |
| |
| If the argument is positive, and the underlying raw stream is |
| not 'interactive', multiple raw reads may be issued to satisfy |
| the byte count (unless EOF is reached first). But for |
| interactive raw streams (XXX and for pipes?), at most one raw |
| read will be issued, and a short result does not imply that |
| EOF is imminent. |
| |
| Returns an empty bytes array on EOF. |
| |
| Raises BlockingIOError if the underlying raw stream has no |
| data at the moment. |
| """ |
| self._unsupported("read") |
| |
| def read1(self, size=None): |
| """Read up to size bytes with at most one read() system call, |
| where size is an int. |
| """ |
| self._unsupported("read1") |
| |
| def readinto(self, b): |
| """Read up to len(b) bytes into bytearray b. |
| |
| Like read(), this may issue multiple reads to the underlying raw |
| stream, unless the latter is 'interactive'. |
| |
| Returns an int representing the number of bytes read (0 for EOF). |
| |
| Raises BlockingIOError if the underlying raw stream has no |
| data at the moment. |
| """ |
| |
| return self._readinto(b, read1=False) |
| |
| def readinto1(self, b): |
| """Read up to len(b) bytes into *b*, using at most one system call |
| |
| Returns an int representing the number of bytes read (0 for EOF). |
| |
| Raises BlockingIOError if the underlying raw stream has no |
| data at the moment. |
| """ |
| |
| return self._readinto(b, read1=True) |
| |
| def _readinto(self, b, read1): |
| if not isinstance(b, memoryview): |
| b = memoryview(b) |
| b = b.cast('B') |
| |
| if read1: |
| data = self.read1(len(b)) |
| else: |
| data = self.read(len(b)) |
| n = len(data) |
| |
| b[:n] = data |
| |
| return n |
| |
| def write(self, b): |
| """Write the given bytes buffer to the IO stream. |
| |
| Return the number of bytes written, which is never less than |
| len(b). |
| |
| Raises BlockingIOError if the buffer is full and the |
| underlying raw stream cannot accept more data at the moment. |
| """ |
| self._unsupported("write") |
| |
| def detach(self): |
| """ |
| Separate the underlying raw stream from the buffer and return it. |
| |
| After the raw stream has been detached, the buffer is in an unusable |
| state. |
| """ |
| self._unsupported("detach") |
| |
| io.BufferedIOBase.register(BufferedIOBase) |
| |
| |
| class _BufferedIOMixin(BufferedIOBase): |
| |
| """A mixin implementation of BufferedIOBase with an underlying raw stream. |
| |
| This passes most requests on to the underlying raw stream. It |
| does *not* provide implementations of read(), readinto() or |
| write(). |
| """ |
| |
| def __init__(self, raw): |
| self._raw = raw |
| |
| ### Positioning ### |
| |
| def seek(self, pos, whence=0): |
| new_position = self.raw.seek(pos, whence) |
| if new_position < 0: |
| raise OSError("seek() returned an invalid position") |
| return new_position |
| |
| def tell(self): |
| pos = self.raw.tell() |
| if pos < 0: |
| raise OSError("tell() returned an invalid position") |
| return pos |
| |
| def truncate(self, pos=None): |
| # Flush the stream. We're mixing buffered I/O with lower-level I/O, |
| # and a flush may be necessary to synch both views of the current |
| # file state. |
| self.flush() |
| |
| if pos is None: |
| pos = self.tell() |
| # XXX: Should seek() be used, instead of passing the position |
| # XXX directly to truncate? |
| return self.raw.truncate(pos) |
| |
| ### Flush and close ### |
| |
| def flush(self): |
| if self.closed: |
| raise ValueError("flush of closed file") |
| self.raw.flush() |
| |
| def close(self): |
| if self.raw is not None and not self.closed: |
| try: |
| # may raise BlockingIOError or BrokenPipeError etc |
| self.flush() |
| finally: |
| self.raw.close() |
| |
| def detach(self): |
| if self.raw is None: |
| raise ValueError("raw stream already detached") |
| self.flush() |
| raw = self._raw |
| self._raw = None |
| return raw |
| |
| ### Inquiries ### |
| |
| def seekable(self): |
| return self.raw.seekable() |
| |
| def readable(self): |
| return self.raw.readable() |
| |
| def writable(self): |
| return self.raw.writable() |
| |
| @property |
| def raw(self): |
| return self._raw |
| |
| @property |
| def closed(self): |
| return self.raw.closed |
| |
| @property |
| def name(self): |
| return self.raw.name |
| |
| @property |
| def mode(self): |
| return self.raw.mode |
| |
| def __getstate__(self): |
| raise TypeError("can not serialize a '{0}' object" |
| .format(self.__class__.__name__)) |
| |
| def __repr__(self): |
| modname = self.__class__.__module__ |
| clsname = self.__class__.__qualname__ |
| try: |
| name = self.name |
| except Exception: |
| return "<{}.{}>".format(modname, clsname) |
| else: |
| return "<{}.{} name={!r}>".format(modname, clsname, name) |
| |
| ### Lower-level APIs ### |
| |
| def fileno(self): |
| return self.raw.fileno() |
| |
| def isatty(self): |
| return self.raw.isatty() |
| |
| |
| class BytesIO(BufferedIOBase): |
| |
| """Buffered I/O implementation using an in-memory bytes buffer.""" |
| |
| def __init__(self, initial_bytes=None): |
| buf = bytearray() |
| if initial_bytes is not None: |
| buf += initial_bytes |
| self._buffer = buf |
| self._pos = 0 |
| |
| def __getstate__(self): |
| if self.closed: |
| raise ValueError("__getstate__ on closed file") |
| return self.__dict__.copy() |
| |
| def getvalue(self): |
| """Return the bytes value (contents) of the buffer |
| """ |
| if self.closed: |
| raise ValueError("getvalue on closed file") |
| return bytes(self._buffer) |
| |
| def getbuffer(self): |
| """Return a readable and writable view of the buffer. |
| """ |
| if self.closed: |
| raise ValueError("getbuffer on closed file") |
| return memoryview(self._buffer) |
| |
| def close(self): |
| self._buffer.clear() |
| super().close() |
| |
| def read(self, size=None): |
| if self.closed: |
| raise ValueError("read from closed file") |
| if size is None: |
| size = -1 |
| if size < 0: |
| size = len(self._buffer) |
| if len(self._buffer) <= self._pos: |
| return b"" |
| newpos = min(len(self._buffer), self._pos + size) |
| b = self._buffer[self._pos : newpos] |
| self._pos = newpos |
| return bytes(b) |
| |
| def read1(self, size): |
| """This is the same as read. |
| """ |
| return self.read(size) |
| |
| def write(self, b): |
| if self.closed: |
| raise ValueError("write to closed file") |
| if isinstance(b, str): |
| raise TypeError("can't write str to binary stream") |
| n = len(b) |
| if n == 0: |
| return 0 |
| pos = self._pos |
| if pos > len(self._buffer): |
| # Inserts null bytes between the current end of the file |
| # and the new write position. |
| padding = b'\x00' * (pos - len(self._buffer)) |
| self._buffer += padding |
| self._buffer[pos:pos + n] = b |
| self._pos += n |
| return n |
| |
| def seek(self, pos, whence=0): |
| if self.closed: |
| raise ValueError("seek on closed file") |
| try: |
| pos.__index__ |
| except AttributeError as err: |
| raise TypeError("an integer is required") from err |
| if whence == 0: |
| if pos < 0: |
| raise ValueError("negative seek position %r" % (pos,)) |
| self._pos = pos |
| elif whence == 1: |
| self._pos = max(0, self._pos + pos) |
| elif whence == 2: |
| self._pos = max(0, len(self._buffer) + pos) |
| else: |
| raise ValueError("unsupported whence value") |
| return self._pos |
| |
| def tell(self): |
| if self.closed: |
| raise ValueError("tell on closed file") |
| return self._pos |
| |
| def truncate(self, pos=None): |
| if self.closed: |
| raise ValueError("truncate on closed file") |
| if pos is None: |
| pos = self._pos |
| else: |
| try: |
| pos.__index__ |
| except AttributeError as err: |
| raise TypeError("an integer is required") from err |
| if pos < 0: |
| raise ValueError("negative truncate position %r" % (pos,)) |
| del self._buffer[pos:] |
| return pos |
| |
| def readable(self): |
| if self.closed: |
| raise ValueError("I/O operation on closed file.") |
| return True |
| |
| def writable(self): |
| if self.closed: |
| raise ValueError("I/O operation on closed file.") |
| return True |
| |
| def seekable(self): |
| if self.closed: |
| raise ValueError("I/O operation on closed file.") |
| return True |
| |
| |
| class BufferedReader(_BufferedIOMixin): |
| |
| """BufferedReader(raw[, buffer_size]) |
| |
| A buffer for a readable, sequential BaseRawIO object. |
| |
| The constructor creates a BufferedReader for the given readable raw |
| stream and buffer_size. If buffer_size is omitted, DEFAULT_BUFFER_SIZE |
| is used. |
| """ |
| |
| def __init__(self, raw, buffer_size=DEFAULT_BUFFER_SIZE): |
| """Create a new buffered reader using the given readable raw IO object. |
| """ |
| if not raw.readable(): |
| raise OSError('"raw" argument must be readable.') |
| |
| _BufferedIOMixin.__init__(self, raw) |
| if buffer_size <= 0: |
| raise ValueError("invalid buffer size") |
| self.buffer_size = buffer_size |
| self._reset_read_buf() |
| self._read_lock = Lock() |
| |
| def _reset_read_buf(self): |
| self._read_buf = b"" |
| self._read_pos = 0 |
| |
| def read(self, size=None): |
| """Read size bytes. |
| |
| Returns exactly size bytes of data unless the underlying raw IO |
| stream reaches EOF or if the call would block in non-blocking |
| mode. If size is negative, read until EOF or until read() would |
| block. |
| """ |
| if size is not None and size < -1: |
| raise ValueError("invalid number of bytes to read") |
| with self._read_lock: |
| return self._read_unlocked(size) |
| |
| def _read_unlocked(self, n=None): |
| nodata_val = b"" |
| empty_values = (b"", None) |
| buf = self._read_buf |
| pos = self._read_pos |
| |
| # Special case for when the number of bytes to read is unspecified. |
| if n is None or n == -1: |
| self._reset_read_buf() |
| if hasattr(self.raw, 'readall'): |
| chunk = self.raw.readall() |
| if chunk is None: |
| return buf[pos:] or None |
| else: |
| return buf[pos:] + chunk |
| chunks = [buf[pos:]] # Strip the consumed bytes. |
| current_size = 0 |
| while True: |
| # Read until EOF or until read() would block. |
| try: |
| chunk = self.raw.read() |
| except InterruptedError: |
| continue |
| if chunk in empty_values: |
| nodata_val = chunk |
| break |
| current_size += len(chunk) |
| chunks.append(chunk) |
| return b"".join(chunks) or nodata_val |
| |
| # The number of bytes to read is specified, return at most n bytes. |
| avail = len(buf) - pos # Length of the available buffered data. |
| if n <= avail: |
| # Fast path: the data to read is fully buffered. |
| self._read_pos += n |
| return buf[pos:pos+n] |
| # Slow path: read from the stream until enough bytes are read, |
| # or until an EOF occurs or until read() would block. |
| chunks = [buf[pos:]] |
| wanted = max(self.buffer_size, n) |
| while avail < n: |
| try: |
| chunk = self.raw.read(wanted) |
| except InterruptedError: |
| continue |
| if chunk in empty_values: |
| nodata_val = chunk |
| break |
| avail += len(chunk) |
| chunks.append(chunk) |
| # n is more then avail only when an EOF occurred or when |
| # read() would have blocked. |
| n = min(n, avail) |
| out = b"".join(chunks) |
| self._read_buf = out[n:] # Save the extra data in the buffer. |
| self._read_pos = 0 |
| return out[:n] if out else nodata_val |
| |
| def peek(self, size=0): |
| """Returns buffered bytes without advancing the position. |
| |
| The argument indicates a desired minimal number of bytes; we |
| do at most one raw read to satisfy it. We never return more |
| than self.buffer_size. |
| """ |
| with self._read_lock: |
| return self._peek_unlocked(size) |
| |
| def _peek_unlocked(self, n=0): |
| want = min(n, self.buffer_size) |
| have = len(self._read_buf) - self._read_pos |
| if have < want or have <= 0: |
| to_read = self.buffer_size - have |
| while True: |
| try: |
| current = self.raw.read(to_read) |
| except InterruptedError: |
| continue |
| break |
| if current: |
| self._read_buf = self._read_buf[self._read_pos:] + current |
| self._read_pos = 0 |
| return self._read_buf[self._read_pos:] |
| |
| def read1(self, size): |
| """Reads up to size bytes, with at most one read() system call.""" |
| # Returns up to size bytes. If at least one byte is buffered, we |
| # only return buffered bytes. Otherwise, we do one raw read. |
| if size < 0: |
| raise ValueError("number of bytes to read must be positive") |
| if size == 0: |
| return b"" |
| with self._read_lock: |
| self._peek_unlocked(1) |
| return self._read_unlocked( |
| min(size, len(self._read_buf) - self._read_pos)) |
| |
| # Implementing readinto() and readinto1() is not strictly necessary (we |
| # could rely on the base class that provides an implementation in terms of |
| # read() and read1()). We do it anyway to keep the _pyio implementation |
| # similar to the io implementation (which implements the methods for |
| # performance reasons). |
| def _readinto(self, buf, read1): |
| """Read data into *buf* with at most one system call.""" |
| |
| if len(buf) == 0: |
| return 0 |
| |
| # Need to create a memoryview object of type 'b', otherwise |
| # we may not be able to assign bytes to it, and slicing it |
| # would create a new object. |
| if not isinstance(buf, memoryview): |
| buf = memoryview(buf) |
| buf = buf.cast('B') |
| |
| written = 0 |
| with self._read_lock: |
| while written < len(buf): |
| |
| # First try to read from internal buffer |
| avail = min(len(self._read_buf) - self._read_pos, len(buf)) |
| if avail: |
| buf[written:written+avail] = \ |
| self._read_buf[self._read_pos:self._read_pos+avail] |
| self._read_pos += avail |
| written += avail |
| if written == len(buf): |
| break |
| |
| # If remaining space in callers buffer is larger than |
| # internal buffer, read directly into callers buffer |
| if len(buf) - written > self.buffer_size: |
| n = self.raw.readinto(buf[written:]) |
| if not n: |
| break # eof |
| written += n |
| |
| # Otherwise refill internal buffer - unless we're |
| # in read1 mode and already got some data |
| elif not (read1 and written): |
| if not self._peek_unlocked(1): |
| break # eof |
| |
| # In readinto1 mode, return as soon as we have some data |
| if read1 and written: |
| break |
| |
| return written |
| |
| def tell(self): |
| return _BufferedIOMixin.tell(self) - len(self._read_buf) + self._read_pos |
| |
| def seek(self, pos, whence=0): |
| if whence not in valid_seek_flags: |
| raise ValueError("invalid whence value") |
| with self._read_lock: |
| if whence == 1: |
| pos -= len(self._read_buf) - self._read_pos |
| pos = _BufferedIOMixin.seek(self, pos, whence) |
| self._reset_read_buf() |
| return pos |
| |
| class BufferedWriter(_BufferedIOMixin): |
| |
| """A buffer for a writeable sequential RawIO object. |
| |
| The constructor creates a BufferedWriter for the given writeable raw |
| stream. If the buffer_size is not given, it defaults to |
| DEFAULT_BUFFER_SIZE. |
| """ |
| |
| def __init__(self, raw, buffer_size=DEFAULT_BUFFER_SIZE): |
| if not raw.writable(): |
| raise OSError('"raw" argument must be writable.') |
| |
| _BufferedIOMixin.__init__(self, raw) |
| if buffer_size <= 0: |
| raise ValueError("invalid buffer size") |
| self.buffer_size = buffer_size |
| self._write_buf = bytearray() |
| self._write_lock = Lock() |
| |
| def write(self, b): |
| if self.closed: |
| raise ValueError("write to closed file") |
| if isinstance(b, str): |
| raise TypeError("can't write str to binary stream") |
| with self._write_lock: |
| # XXX we can implement some more tricks to try and avoid |
| # partial writes |
| if len(self._write_buf) > self.buffer_size: |
| # We're full, so let's pre-flush the buffer. (This may |
| # raise BlockingIOError with characters_written == 0.) |
| self._flush_unlocked() |
| before = len(self._write_buf) |
| self._write_buf.extend(b) |
| written = len(self._write_buf) - before |
| if len(self._write_buf) > self.buffer_size: |
| try: |
| self._flush_unlocked() |
| except BlockingIOError as e: |
| if len(self._write_buf) > self.buffer_size: |
| # We've hit the buffer_size. We have to accept a partial |
| # write and cut back our buffer. |
| overage = len(self._write_buf) - self.buffer_size |
| written -= overage |
| self._write_buf = self._write_buf[:self.buffer_size] |
| raise BlockingIOError(e.errno, e.strerror, written) |
| return written |
| |
| def truncate(self, pos=None): |
| with self._write_lock: |
| self._flush_unlocked() |
| if pos is None: |
| pos = self.raw.tell() |
| return self.raw.truncate(pos) |
| |
| def flush(self): |
| with self._write_lock: |
| self._flush_unlocked() |
| |
| def _flush_unlocked(self): |
| if self.closed: |
| raise ValueError("flush of closed file") |
| while self._write_buf: |
| try: |
| n = self.raw.write(self._write_buf) |
| except InterruptedError: |
| continue |
| except BlockingIOError: |
| raise RuntimeError("self.raw should implement RawIOBase: it " |
| "should not raise BlockingIOError") |
| if n is None: |
| raise BlockingIOError( |
| errno.EAGAIN, |
| "write could not complete without blocking", 0) |
| if n > len(self._write_buf) or n < 0: |
| raise OSError("write() returned incorrect number of bytes") |
| del self._write_buf[:n] |
| |
| def tell(self): |
| return _BufferedIOMixin.tell(self) + len(self._write_buf) |
| |
| def seek(self, pos, whence=0): |
| if whence not in valid_seek_flags: |
| raise ValueError("invalid whence value") |
| with self._write_lock: |
| self._flush_unlocked() |
| return _BufferedIOMixin.seek(self, pos, whence) |
| |
| |
| class BufferedRWPair(BufferedIOBase): |
| |
| """A buffered reader and writer object together. |
| |
| A buffered reader object and buffered writer object put together to |
| form a sequential IO object that can read and write. This is typically |
| used with a socket or two-way pipe. |
| |
| reader and writer are RawIOBase objects that are readable and |
| writeable respectively. If the buffer_size is omitted it defaults to |
| DEFAULT_BUFFER_SIZE. |
| """ |
| |
| # XXX The usefulness of this (compared to having two separate IO |
| # objects) is questionable. |
| |
| def __init__(self, reader, writer, buffer_size=DEFAULT_BUFFER_SIZE): |
| """Constructor. |
| |
| The arguments are two RawIO instances. |
| """ |
| if not reader.readable(): |
| raise OSError('"reader" argument must be readable.') |
| |
| if not writer.writable(): |
| raise OSError('"writer" argument must be writable.') |
| |
| self.reader = BufferedReader(reader, buffer_size) |
| self.writer = BufferedWriter(writer, buffer_size) |
| |
| def read(self, size=None): |
| if size is None: |
| size = -1 |
| return self.reader.read(size) |
| |
| def readinto(self, b): |
| return self.reader.readinto(b) |
| |
| def write(self, b): |
| return self.writer.write(b) |
| |
| def peek(self, size=0): |
| return self.reader.peek(size) |
| |
| def read1(self, size): |
| return self.reader.read1(size) |
| |
| def readinto1(self, b): |
| return self.reader.readinto1(b) |
| |
| def readable(self): |
| return self.reader.readable() |
| |
| def writable(self): |
| return self.writer.writable() |
| |
| def flush(self): |
| return self.writer.flush() |
| |
| def close(self): |
| self.writer.close() |
| self.reader.close() |
| |
| def isatty(self): |
| return self.reader.isatty() or self.writer.isatty() |
| |
| @property |
| def closed(self): |
| return self.writer.closed |
| |
| |
| class BufferedRandom(BufferedWriter, BufferedReader): |
| |
| """A buffered interface to random access streams. |
| |
| The constructor creates a reader and writer for a seekable stream, |
| raw, given in the first argument. If the buffer_size is omitted it |
| defaults to DEFAULT_BUFFER_SIZE. |
| """ |
| |
| def __init__(self, raw, buffer_size=DEFAULT_BUFFER_SIZE): |
| raw._checkSeekable() |
| BufferedReader.__init__(self, raw, buffer_size) |
| BufferedWriter.__init__(self, raw, buffer_size) |
| |
| def seek(self, pos, whence=0): |
| if whence not in valid_seek_flags: |
| raise ValueError("invalid whence value") |
| self.flush() |
| if self._read_buf: |
| # Undo read ahead. |
| with self._read_lock: |
| self.raw.seek(self._read_pos - len(self._read_buf), 1) |
| # First do the raw seek, then empty the read buffer, so that |
| # if the raw seek fails, we don't lose buffered data forever. |
| pos = self.raw.seek(pos, whence) |
| with self._read_lock: |
| self._reset_read_buf() |
| if pos < 0: |
| raise OSError("seek() returned invalid position") |
| return pos |
| |
| def tell(self): |
| if self._write_buf: |
| return BufferedWriter.tell(self) |
| else: |
| return BufferedReader.tell(self) |
| |
| def truncate(self, pos=None): |
| if pos is None: |
| pos = self.tell() |
| # Use seek to flush the read buffer. |
| return BufferedWriter.truncate(self, pos) |
| |
| def read(self, size=None): |
| if size is None: |
| size = -1 |
| self.flush() |
| return BufferedReader.read(self, size) |
| |
| def readinto(self, b): |
| self.flush() |
| return BufferedReader.readinto(self, b) |
| |
| def peek(self, size=0): |
| self.flush() |
| return BufferedReader.peek(self, size) |
| |
| def read1(self, size): |
| self.flush() |
| return BufferedReader.read1(self, size) |
| |
| def readinto1(self, b): |
| self.flush() |
| return BufferedReader.readinto1(self, b) |
| |
| def write(self, b): |
| if self._read_buf: |
| # Undo readahead |
| with self._read_lock: |
| self.raw.seek(self._read_pos - len(self._read_buf), 1) |
| self._reset_read_buf() |
| return BufferedWriter.write(self, b) |
| |
| |
| class TextIOBase(IOBase): |
| |
| """Base class for text I/O. |
| |
| This class provides a character and line based interface to stream |
| I/O. There is no readinto method because Python's character strings |
| are immutable. There is no public constructor. |
| """ |
| |
| def read(self, size=-1): |
| """Read at most size characters from stream, where size is an int. |
| |
| Read from underlying buffer until we have size characters or we hit EOF. |
| If size is negative or omitted, read until EOF. |
| |
| Returns a string. |
| """ |
| self._unsupported("read") |
| |
| def write(self, s): |
| """Write string s to stream and returning an int.""" |
| self._unsupported("write") |
| |
| def truncate(self, pos=None): |
| """Truncate size to pos, where pos is an int.""" |
| self._unsupported("truncate") |
| |
| def readline(self): |
| """Read until newline or EOF. |
| |
| Returns an empty string if EOF is hit immediately. |
| """ |
| self._unsupported("readline") |
| |
| def detach(self): |
| """ |
| Separate the underlying buffer from the TextIOBase and return it. |
| |
| After the underlying buffer has been detached, the TextIO is in an |
| unusable state. |
| """ |
| self._unsupported("detach") |
| |
| @property |
| def encoding(self): |
| """Subclasses should override.""" |
| return None |
| |
| @property |
| def newlines(self): |
| """Line endings translated so far. |
| |
| Only line endings translated during reading are considered. |
| |
| Subclasses should override. |
| """ |
| return None |
| |
| @property |
| def errors(self): |
| """Error setting of the decoder or encoder. |
| |
| Subclasses should override.""" |
| return None |
| |
| io.TextIOBase.register(TextIOBase) |
| |
| |
| class IncrementalNewlineDecoder(codecs.IncrementalDecoder): |
| r"""Codec used when reading a file in universal newlines mode. It wraps |
| another incremental decoder, translating \r\n and \r into \n. It also |
| records the types of newlines encountered. When used with |
| translate=False, it ensures that the newline sequence is returned in |
| one piece. |
| """ |
| def __init__(self, decoder, translate, errors='strict'): |
| codecs.IncrementalDecoder.__init__(self, errors=errors) |
| self.translate = translate |
| self.decoder = decoder |
| self.seennl = 0 |
| self.pendingcr = False |
| |
| def decode(self, input, final=False): |
| # decode input (with the eventual \r from a previous pass) |
| if self.decoder is None: |
| output = input |
| else: |
| output = self.decoder.decode(input, final=final) |
| if self.pendingcr and (output or final): |
| output = "\r" + output |
| self.pendingcr = False |
| |
| # retain last \r even when not translating data: |
| # then readline() is sure to get \r\n in one pass |
| if output.endswith("\r") and not final: |
| output = output[:-1] |
| self.pendingcr = True |
| |
| # Record which newlines are read |
| crlf = output.count('\r\n') |
| cr = output.count('\r') - crlf |
| lf = output.count('\n') - crlf |
| self.seennl |= (lf and self._LF) | (cr and self._CR) \ |
| | (crlf and self._CRLF) |
| |
| if self.translate: |
| if crlf: |
| output = output.replace("\r\n", "\n") |
| if cr: |
| output = output.replace("\r", "\n") |
| |
| return output |
| |
| def getstate(self): |
| if self.decoder is None: |
| buf = b"" |
| flag = 0 |
| else: |
| buf, flag = self.decoder.getstate() |
| flag <<= 1 |
| if self.pendingcr: |
| flag |= 1 |
| return buf, flag |
| |
| def setstate(self, state): |
| buf, flag = state |
| self.pendingcr = bool(flag & 1) |
| if self.decoder is not None: |
| self.decoder.setstate((buf, flag >> 1)) |
| |
| def reset(self): |
| self.seennl = 0 |
| self.pendingcr = False |
| if self.decoder is not None: |
| self.decoder.reset() |
| |
| _LF = 1 |
| _CR = 2 |
| _CRLF = 4 |
| |
| @property |
| def newlines(self): |
| return (None, |
| "\n", |
| "\r", |
| ("\r", "\n"), |
| "\r\n", |
| ("\n", "\r\n"), |
| ("\r", "\r\n"), |
| ("\r", "\n", "\r\n") |
| )[self.seennl] |
| |
| |
| class TextIOWrapper(TextIOBase): |
| |
| r"""Character and line based layer over a BufferedIOBase object, buffer. |
| |
| encoding gives the name of the encoding that the stream will be |
| decoded or encoded with. It defaults to locale.getpreferredencoding(False). |
| |
| errors determines the strictness of encoding and decoding (see the |
| codecs.register) and defaults to "strict". |
| |
| newline can be None, '', '\n', '\r', or '\r\n'. It controls the |
| handling of line endings. If it is None, universal newlines is |
| enabled. With this enabled, on input, the lines endings '\n', '\r', |
| or '\r\n' are translated to '\n' before being returned to the |
| caller. Conversely, on output, '\n' is translated to the system |
| default line separator, os.linesep. If newline is any other of its |
| legal values, that newline becomes the newline when the file is read |
| and it is returned untranslated. On output, '\n' is converted to the |
| newline. |
| |
| If line_buffering is True, a call to flush is implied when a call to |
| write contains a newline character. |
| """ |
| |
| _CHUNK_SIZE = 2048 |
| |
| # The write_through argument has no effect here since this |
| # implementation always writes through. The argument is present only |
| # so that the signature can match the signature of the C version. |
| def __init__(self, buffer, encoding=None, errors=None, newline=None, |
| line_buffering=False, write_through=False): |
| if newline is not None and not isinstance(newline, str): |
| raise TypeError("illegal newline type: %r" % (type(newline),)) |
| if newline not in (None, "", "\n", "\r", "\r\n"): |
| raise ValueError("illegal newline value: %r" % (newline,)) |
| if encoding is None: |
| try: |
| encoding = os.device_encoding(buffer.fileno()) |
| except (AttributeError, UnsupportedOperation): |
| pass |
| if encoding is None: |
| try: |
| import locale |
| except ImportError: |
| # Importing locale may fail if Python is being built |
| encoding = "ascii" |
| else: |
| encoding = locale.getpreferredencoding(False) |
| |
| if not isinstance(encoding, str): |
| raise ValueError("invalid encoding: %r" % encoding) |
| |
| if not codecs.lookup(encoding)._is_text_encoding: |
| msg = ("%r is not a text encoding; " |
| "use codecs.open() to handle arbitrary codecs") |
| raise LookupError(msg % encoding) |
| |
| if errors is None: |
| errors = "strict" |
| else: |
| if not isinstance(errors, str): |
| raise ValueError("invalid errors: %r" % errors) |
| |
| self._buffer = buffer |
| self._line_buffering = line_buffering |
| self._encoding = encoding |
| self._errors = errors |
| self._readuniversal = not newline |
| self._readtranslate = newline is None |
| self._readnl = newline |
| self._writetranslate = newline != '' |
| self._writenl = newline or os.linesep |
| self._encoder = None |
| self._decoder = None |
| self._decoded_chars = '' # buffer for text returned from decoder |
| self._decoded_chars_used = 0 # offset into _decoded_chars for read() |
| self._snapshot = None # info for reconstructing decoder state |
| self._seekable = self._telling = self.buffer.seekable() |
| self._has_read1 = hasattr(self.buffer, 'read1') |
| self._b2cratio = 0.0 |
| |
| if self._seekable and self.writable(): |
| position = self.buffer.tell() |
| if position != 0: |
| try: |
| self._get_encoder().setstate(0) |
| except LookupError: |
| # Sometimes the encoder doesn't exist |
| pass |
| |
| # self._snapshot is either None, or a tuple (dec_flags, next_input) |
| # where dec_flags is the second (integer) item of the decoder state |
| # and next_input is the chunk of input bytes that comes next after the |
| # snapshot point. We use this to reconstruct decoder states in tell(). |
| |
| # Naming convention: |
| # - "bytes_..." for integer variables that count input bytes |
| # - "chars_..." for integer variables that count decoded characters |
| |
| def __repr__(self): |
| result = "<{}.{}".format(self.__class__.__module__, |
| self.__class__.__qualname__) |
| try: |
| name = self.name |
| except Exception: |
| pass |
| else: |
| result += " name={0!r}".format(name) |
| try: |
| mode = self.mode |
| except Exception: |
| pass |
| else: |
| result += " mode={0!r}".format(mode) |
| return result + " encoding={0!r}>".format(self.encoding) |
| |
| @property |
| def encoding(self): |
| return self._encoding |
| |
| @property |
| def errors(self): |
| return self._errors |
| |
| @property |
| def line_buffering(self): |
| return self._line_buffering |
| |
| @property |
| def buffer(self): |
| return self._buffer |
| |
| def seekable(self): |
| if self.closed: |
| raise ValueError("I/O operation on closed file.") |
| return self._seekable |
| |
| def readable(self): |
| return self.buffer.readable() |
| |
| def writable(self): |
| return self.buffer.writable() |
| |
| def flush(self): |
| self.buffer.flush() |
| self._telling = self._seekable |
| |
| def close(self): |
| if self.buffer is not None and not self.closed: |
| try: |
| self.flush() |
| finally: |
| self.buffer.close() |
| |
| @property |
| def closed(self): |
| return self.buffer.closed |
| |
| @property |
| def name(self): |
| return self.buffer.name |
| |
| def fileno(self): |
| return self.buffer.fileno() |
| |
| def isatty(self): |
| return self.buffer.isatty() |
| |
| def write(self, s): |
| 'Write data, where s is a str' |
| if self.closed: |
| raise ValueError("write to closed file") |
| if not isinstance(s, str): |
| raise TypeError("can't write %s to text stream" % |
| s.__class__.__name__) |
| length = len(s) |
| haslf = (self._writetranslate or self._line_buffering) and "\n" in s |
| if haslf and self._writetranslate and self._writenl != "\n": |
| s = s.replace("\n", self._writenl) |
| encoder = self._encoder or self._get_encoder() |
| # XXX What if we were just reading? |
| b = encoder.encode(s) |
| self.buffer.write(b) |
| if self._line_buffering and (haslf or "\r" in s): |
| self.flush() |
| self._snapshot = None |
| if self._decoder: |
| self._decoder.reset() |
| return length |
| |
| def _get_encoder(self): |
| make_encoder = codecs.getincrementalencoder(self._encoding) |
| self._encoder = make_encoder(self._errors) |
| return self._encoder |
| |
| def _get_decoder(self): |
| make_decoder = codecs.getincrementaldecoder(self._encoding) |
| decoder = make_decoder(self._errors) |
| if self._readuniversal: |
| decoder = IncrementalNewlineDecoder(decoder, self._readtranslate) |
| self._decoder = decoder |
| return decoder |
| |
| # The following three methods implement an ADT for _decoded_chars. |
| # Text returned from the decoder is buffered here until the client |
| # requests it by calling our read() or readline() method. |
| def _set_decoded_chars(self, chars): |
| """Set the _decoded_chars buffer.""" |
| self._decoded_chars = chars |
| self._decoded_chars_used = 0 |
| |
| def _get_decoded_chars(self, n=None): |
| """Advance into the _decoded_chars buffer.""" |
| offset = self._decoded_chars_used |
| if n is None: |
| chars = self._decoded_chars[offset:] |
| else: |
| chars = self._decoded_chars[offset:offset + n] |
| self._decoded_chars_used += len(chars) |
| return chars |
| |
| def _rewind_decoded_chars(self, n): |
| """Rewind the _decoded_chars buffer.""" |
| if self._decoded_chars_used < n: |
| raise AssertionError("rewind decoded_chars out of bounds") |
| self._decoded_chars_used -= n |
| |
| def _read_chunk(self): |
| """ |
| Read and decode the next chunk of data from the BufferedReader. |
| """ |
| |
| # The return value is True unless EOF was reached. The decoded |
| # string is placed in self._decoded_chars (replacing its previous |
| # value). The entire input chunk is sent to the decoder, though |
| # some of it may remain buffered in the decoder, yet to be |
| # converted. |
| |
| if self._decoder is None: |
| raise ValueError("no decoder") |
| |
| if self._telling: |
| # To prepare for tell(), we need to snapshot a point in the |
| # file where the decoder's input buffer is empty. |
| |
| dec_buffer, dec_flags = self._decoder.getstate() |
| # Given this, we know there was a valid snapshot point |
| # len(dec_buffer) bytes ago with decoder state (b'', dec_flags). |
| |
| # Read a chunk, decode it, and put the result in self._decoded_chars. |
| if self._has_read1: |
| input_chunk = self.buffer.read1(self._CHUNK_SIZE) |
| else: |
| input_chunk = self.buffer.read(self._CHUNK_SIZE) |
| eof = not input_chunk |
| decoded_chars = self._decoder.decode(input_chunk, eof) |
| self._set_decoded_chars(decoded_chars) |
| if decoded_chars: |
| self._b2cratio = len(input_chunk) / len(self._decoded_chars) |
| else: |
| self._b2cratio = 0.0 |
| |
| if self._telling: |
| # At the snapshot point, len(dec_buffer) bytes before the read, |
| # the next input to be decoded is dec_buffer + input_chunk. |
| self._snapshot = (dec_flags, dec_buffer + input_chunk) |
| |
| return not eof |
| |
| def _pack_cookie(self, position, dec_flags=0, |
| bytes_to_feed=0, need_eof=0, chars_to_skip=0): |
| # The meaning of a tell() cookie is: seek to position, set the |
| # decoder flags to dec_flags, read bytes_to_feed bytes, feed them |
| # into the decoder with need_eof as the EOF flag, then skip |
| # chars_to_skip characters of the decoded result. For most simple |
| # decoders, tell() will often just give a byte offset in the file. |
| return (position | (dec_flags<<64) | (bytes_to_feed<<128) | |
| (chars_to_skip<<192) | bool(need_eof)<<256) |
| |
| def _unpack_cookie(self, bigint): |
| rest, position = divmod(bigint, 1<<64) |
| rest, dec_flags = divmod(rest, 1<<64) |
| rest, bytes_to_feed = divmod(rest, 1<<64) |
| need_eof, chars_to_skip = divmod(rest, 1<<64) |
| return position, dec_flags, bytes_to_feed, need_eof, chars_to_skip |
| |
| def tell(self): |
| if not self._seekable: |
| raise UnsupportedOperation("underlying stream is not seekable") |
| if not self._telling: |
| raise OSError("telling position disabled by next() call") |
| self.flush() |
| position = self.buffer.tell() |
| decoder = self._decoder |
| if decoder is None or self._snapshot is None: |
| if self._decoded_chars: |
| # This should never happen. |
| raise AssertionError("pending decoded text") |
| return position |
| |
| # Skip backward to the snapshot point (see _read_chunk). |
| dec_flags, next_input = self._snapshot |
| position -= len(next_input) |
| |
| # How many decoded characters have been used up since the snapshot? |
| chars_to_skip = self._decoded_chars_used |
| if chars_to_skip == 0: |
| # We haven't moved from the snapshot point. |
| return self._pack_cookie(position, dec_flags) |
| |
| # Starting from the snapshot position, we will walk the decoder |
| # forward until it gives us enough decoded characters. |
| saved_state = decoder.getstate() |
| try: |
| # Fast search for an acceptable start point, close to our |
| # current pos. |
| # Rationale: calling decoder.decode() has a large overhead |
| # regardless of chunk size; we want the number of such calls to |
| # be O(1) in most situations (common decoders, non-crazy input). |
| # Actually, it will be exactly 1 for fixed-size codecs (all |
| # 8-bit codecs, also UTF-16 and UTF-32). |
| skip_bytes = int(self._b2cratio * chars_to_skip) |
| skip_back = 1 |
| assert skip_bytes <= len(next_input) |
| while skip_bytes > 0: |
| decoder.setstate((b'', dec_flags)) |
| # Decode up to temptative start point |
| n = len(decoder.decode(next_input[:skip_bytes])) |
| if n <= chars_to_skip: |
| b, d = decoder.getstate() |
| if not b: |
| # Before pos and no bytes buffered in decoder => OK |
| dec_flags = d |
| chars_to_skip -= n |
| break |
| # Skip back by buffered amount and reset heuristic |
| skip_bytes -= len(b) |
| skip_back = 1 |
| else: |
| # We're too far ahead, skip back a bit |
| skip_bytes -= skip_back |
| skip_back = skip_back * 2 |
| else: |
| skip_bytes = 0 |
| decoder.setstate((b'', dec_flags)) |
| |
| # Note our initial start point. |
| start_pos = position + skip_bytes |
| start_flags = dec_flags |
| if chars_to_skip == 0: |
| # We haven't moved from the start point. |
| return self._pack_cookie(start_pos, start_flags) |
| |
| # Feed the decoder one byte at a time. As we go, note the |
| # nearest "safe start point" before the current location |
| # (a point where the decoder has nothing buffered, so seek() |
| # can safely start from there and advance to this location). |
| bytes_fed = 0 |
| need_eof = 0 |
| # Chars decoded since `start_pos` |
| chars_decoded = 0 |
| for i in range(skip_bytes, len(next_input)): |
| bytes_fed += 1 |
| chars_decoded += len(decoder.decode(next_input[i:i+1])) |
| dec_buffer, dec_flags = decoder.getstate() |
| if not dec_buffer and chars_decoded <= chars_to_skip: |
| # Decoder buffer is empty, so this is a safe start point. |
| start_pos += bytes_fed |
| chars_to_skip -= chars_decoded |
| start_flags, bytes_fed, chars_decoded = dec_flags, 0, 0 |
| if chars_decoded >= chars_to_skip: |
| break |
| else: |
| # We didn't get enough decoded data; signal EOF to get more. |
| chars_decoded += len(decoder.decode(b'', final=True)) |
| need_eof = 1 |
| if chars_decoded < chars_to_skip: |
| raise OSError("can't reconstruct logical file position") |
| |
| # The returned cookie corresponds to the last safe start point. |
| return self._pack_cookie( |
| start_pos, start_flags, bytes_fed, need_eof, chars_to_skip) |
| finally: |
| decoder.setstate(saved_state) |
| |
| def truncate(self, pos=None): |
| self.flush() |
| if pos is None: |
| pos = self.tell() |
| return self.buffer.truncate(pos) |
| |
| def detach(self): |
| if self.buffer is None: |
| raise ValueError("buffer is already detached") |
| self.flush() |
| buffer = self._buffer |
| self._buffer = None |
| return buffer |
| |
| def seek(self, cookie, whence=0): |
| if self.closed: |
| raise ValueError("tell on closed file") |
| if not self._seekable: |
| raise UnsupportedOperation("underlying stream is not seekable") |
| if whence == 1: # seek relative to current position |
| if cookie != 0: |
| raise UnsupportedOperation("can't do nonzero cur-relative seeks") |
| # Seeking to the current position should attempt to |
| # sync the underlying buffer with the current position. |
| whence = 0 |
| cookie = self.tell() |
| if whence == 2: # seek relative to end of file |
| if cookie != 0: |
| raise UnsupportedOperation("can't do nonzero end-relative seeks") |
| self.flush() |
| position = self.buffer.seek(0, 2) |
| self._set_decoded_chars('') |
| self._snapshot = None |
| if self._decoder: |
| self._decoder.reset() |
| return position |
| if whence != 0: |
| raise ValueError("unsupported whence (%r)" % (whence,)) |
| if cookie < 0: |
| raise ValueError("negative seek position %r" % (cookie,)) |
| self.flush() |
| |
| # The strategy of seek() is to go back to the safe start point |
| # and replay the effect of read(chars_to_skip) from there. |
| start_pos, dec_flags, bytes_to_feed, need_eof, chars_to_skip = \ |
| self._unpack_cookie(cookie) |
| |
| # Seek back to the safe start point. |
| self.buffer.seek(start_pos) |
| self._set_decoded_chars('') |
| self._snapshot = None |
| |
| # Restore the decoder to its state from the safe start point. |
| if cookie == 0 and self._decoder: |
| self._decoder.reset() |
| elif self._decoder or dec_flags or chars_to_skip: |
| self._decoder = self._decoder or self._get_decoder() |
| self._decoder.setstate((b'', dec_flags)) |
| self._snapshot = (dec_flags, b'') |
| |
| if chars_to_skip: |
| # Just like _read_chunk, feed the decoder and save a snapshot. |
| input_chunk = self.buffer.read(bytes_to_feed) |
| self._set_decoded_chars( |
| self._decoder.decode(input_chunk, need_eof)) |
| self._snapshot = (dec_flags, input_chunk) |
| |
| # Skip chars_to_skip of the decoded characters. |
| if len(self._decoded_chars) < chars_to_skip: |
| raise OSError("can't restore logical file position") |
| self._decoded_chars_used = chars_to_skip |
| |
| # Finally, reset the encoder (merely useful for proper BOM handling) |
| try: |
| encoder = self._encoder or self._get_encoder() |
| except LookupError: |
| # Sometimes the encoder doesn't exist |
| pass |
| else: |
| if cookie != 0: |
| encoder.setstate(0) |
| else: |
| encoder.reset() |
| return cookie |
| |
| def read(self, size=None): |
| self._checkReadable() |
| if size is None: |
| size = -1 |
| decoder = self._decoder or self._get_decoder() |
| try: |
| size.__index__ |
| except AttributeError as err: |
| raise TypeError("an integer is required") from err |
| if size < 0: |
| # Read everything. |
| result = (self._get_decoded_chars() + |
| decoder.decode(self.buffer.read(), final=True)) |
| self._set_decoded_chars('') |
| self._snapshot = None |
| return result |
| else: |
| # Keep reading chunks until we have size characters to return. |
| eof = False |
| result = self._get_decoded_chars(size) |
| while len(result) < size and not eof: |
| eof = not self._read_chunk() |
| result += self._get_decoded_chars(size - len(result)) |
| return result |
| |
| def __next__(self): |
| self._telling = False |
| line = self.readline() |
| if not line: |
| self._snapshot = None |
| self._telling = self._seekable |
| raise StopIteration |
| return line |
| |
| def readline(self, size=None): |
| if self.closed: |
| raise ValueError("read from closed file") |
| if size is None: |
| size = -1 |
| elif not isinstance(size, int): |
| raise TypeError("size must be an integer") |
| |
| # Grab all the decoded text (we will rewind any extra bits later). |
| line = self._get_decoded_chars() |
| |
| start = 0 |
| # Make the decoder if it doesn't already exist. |
| if not self._decoder: |
| self._get_decoder() |
| |
| pos = endpos = None |
| while True: |
| if self._readtranslate: |
| # Newlines are already translated, only search for \n |
| pos = line.find('\n', start) |
| if pos >= 0: |
| endpos = pos + 1 |
| break |
| else: |
| start = len(line) |
| |
| elif self._readuniversal: |
| # Universal newline search. Find any of \r, \r\n, \n |
| # The decoder ensures that \r\n are not split in two pieces |
| |
| # In C we'd look for these in parallel of course. |
| nlpos = line.find("\n", start) |
| crpos = line.find("\r", start) |
| if crpos == -1: |
| if nlpos == -1: |
| # Nothing found |
| start = len(line) |
| else: |
| # Found \n |
| endpos = nlpos + 1 |
| break |
| elif nlpos == -1: |
| # Found lone \r |
| endpos = crpos + 1 |
| break |
| elif nlpos < crpos: |
| # Found \n |
| endpos = nlpos + 1 |
| break |
| elif nlpos == crpos + 1: |
| # Found \r\n |
| endpos = crpos + 2 |
| break |
| else: |
| # Found \r |
| endpos = crpos + 1 |
| break |
| else: |
| # non-universal |
| pos = line.find(self._readnl) |
| if pos >= 0: |
| endpos = pos + len(self._readnl) |
| break |
| |
| if size >= 0 and len(line) >= size: |
| endpos = size # reached length size |
| break |
| |
| # No line ending seen yet - get more data' |
| while self._read_chunk(): |
| if self._decoded_chars: |
| break |
| if self._decoded_chars: |
| line += self._get_decoded_chars() |
| else: |
| # end of file |
| self._set_decoded_chars('') |
| self._snapshot = None |
| return line |
| |
| if size >= 0 and endpos > size: |
| endpos = size # don't exceed size |
| |
| # Rewind _decoded_chars to just after the line ending we found. |
| self._rewind_decoded_chars(len(line) - endpos) |
| return line[:endpos] |
| |
| @property |
| def newlines(self): |
| return self._decoder.newlines if self._decoder else None |
| |
| |
| class StringIO(TextIOWrapper): |
| """Text I/O implementation using an in-memory buffer. |
| |
| The initial_value argument sets the value of object. The newline |
| argument is like the one of TextIOWrapper's constructor. |
| """ |
| |
| def __init__(self, initial_value="", newline="\n"): |
| super(StringIO, self).__init__(BytesIO(), |
| encoding="utf-8", |
| errors="surrogatepass", |
| newline=newline) |
| # Issue #5645: make universal newlines semantics the same as in the |
| # C version, even under Windows. |
| if newline is None: |
| self._writetranslate = False |
| if initial_value is not None: |
| if not isinstance(initial_value, str): |
| raise TypeError("initial_value must be str or None, not {0}" |
| .format(type(initial_value).__name__)) |
| self.write(initial_value) |
| self.seek(0) |
| |
| def getvalue(self): |
| self.flush() |
| decoder = self._decoder or self._get_decoder() |
| old_state = decoder.getstate() |
| decoder.reset() |
| try: |
| return decoder.decode(self.buffer.getvalue(), final=True) |
| finally: |
| decoder.setstate(old_state) |
| |
| def __repr__(self): |
| # TextIOWrapper tells the encoding in its repr. In StringIO, |
| # that's a implementation detail. |
| return object.__repr__(self) |
| |
| @property |
| def errors(self): |
| return None |
| |
| @property |
| def encoding(self): |
| return None |
| |
| def detach(self): |
| # This doesn't make sense on StringIO. |
| self._unsupported("detach") |