| # Python MSI Generator |
| # (C) 2003 Martin v. Loewis |
| # See "FOO" in comments refers to MSDN sections with the title FOO. |
| import msilib, schema, sequence, os, glob, time, re, shutil, zipfile |
| import subprocess, tempfile |
| from msilib import Feature, CAB, Directory, Dialog, Binary, add_data |
| import uisample |
| from win32com.client import constants |
| from distutils.spawn import find_executable |
| |
| # Settings can be overridden in config.py below |
| # 0 for official python.org releases |
| # 1 for intermediate releases by anybody, with |
| # a new product code for every package. |
| snapshot = 1 |
| # 1 means that file extension is px, not py, |
| # and binaries start with x |
| testpackage = 0 |
| # Location of build tree |
| srcdir = os.path.abspath("../..") |
| # Text to be displayed as the version in dialogs etc. |
| # goes into file name and ProductCode. Defaults to |
| # current_version.day for Snapshot, current_version otherwise |
| full_current_version = None |
| # Is Tcl available at all? |
| have_tcl = True |
| # path to PCbuild directory |
| PCBUILD="PCbuild" |
| # msvcrt version |
| MSVCR = "100" |
| # Name of certificate in default store to sign MSI with |
| certname = None |
| # Make a zip file containing the PDB files for this build? |
| pdbzip = True |
| |
| try: |
| from config import * |
| except ImportError: |
| pass |
| |
| # Extract current version from Include/patchlevel.h |
| lines = open(srcdir + "/Include/patchlevel.h").readlines() |
| major = minor = micro = level = serial = None |
| levels = { |
| 'PY_RELEASE_LEVEL_ALPHA':0xA, |
| 'PY_RELEASE_LEVEL_BETA': 0xB, |
| 'PY_RELEASE_LEVEL_GAMMA':0xC, |
| 'PY_RELEASE_LEVEL_FINAL':0xF |
| } |
| for l in lines: |
| if not l.startswith("#define"): |
| continue |
| l = l.split() |
| if len(l) != 3: |
| continue |
| _, name, value = l |
| if name == 'PY_MAJOR_VERSION': major = value |
| if name == 'PY_MINOR_VERSION': minor = value |
| if name == 'PY_MICRO_VERSION': micro = value |
| if name == 'PY_RELEASE_LEVEL': level = levels[value] |
| if name == 'PY_RELEASE_SERIAL': serial = value |
| |
| short_version = major+"."+minor |
| # See PC/make_versioninfo.c |
| FIELD3 = 1000*int(micro) + 10*level + int(serial) |
| current_version = "%s.%d" % (short_version, FIELD3) |
| |
| # This should never change. The UpgradeCode of this package can be |
| # used in the Upgrade table of future packages to make the future |
| # package replace this one. See "UpgradeCode Property". |
| # upgrade_code gets set to upgrade_code_64 when we have determined |
| # that the target is Win64. |
| upgrade_code_snapshot='{92A24481-3ECB-40FC-8836-04B7966EC0D5}' |
| upgrade_code='{65E6DE48-A358-434D-AA4F-4AF72DB4718F}' |
| upgrade_code_64='{6A965A0C-6EE6-4E3A-9983-3263F56311EC}' |
| |
| if snapshot: |
| current_version = "%s.%s.%s" % (major, minor, int(time.time()/3600/24)) |
| |
| if full_current_version is None: |
| full_current_version = current_version |
| |
| extensions = [ |
| 'pyexpat.pyd', |
| 'select.pyd', |
| 'unicodedata.pyd', |
| 'winsound.pyd', |
| '_bz2.pyd', |
| '_elementtree.pyd', |
| '_socket.pyd', |
| '_ssl.pyd', |
| '_testcapi.pyd', |
| '_tkinter.pyd', |
| '_msi.pyd', |
| '_ctypes.pyd', |
| '_ctypes_test.pyd', |
| '_sqlite3.pyd', |
| '_hashlib.pyd', |
| '_multiprocessing.pyd', |
| '_lzma.pyd', |
| '_decimal.pyd', |
| '_testbuffer.pyd', |
| '_sha3.pyd', |
| '_testimportmultiple.pyd', |
| ] |
| |
| # Well-known component UUIDs |
| # These are needed for SharedDLLs reference counter; if |
| # a different UUID was used for each incarnation of, say, |
| # python24.dll, an upgrade would set the reference counter |
| # from 1 to 2 (due to what I consider a bug in MSI) |
| # Using the same UUID is fine since these files are versioned, |
| # so Installer will always keep the newest version. |
| # NOTE: All uuids are self generated. |
| pythondll_uuid = { |
| "24":"{9B81E618-2301-4035-AC77-75D9ABEB7301}", |
| "25":"{2e41b118-38bd-4c1b-a840-6977efd1b911}", |
| "26":"{34ebecac-f046-4e1c-b0e3-9bac3cdaacfa}", |
| "27":"{4fe21c76-1760-437b-a2f2-99909130a175}", |
| "30":"{6953bc3b-6768-4291-8410-7914ce6e2ca8}", |
| "31":"{4afcba0b-13e4-47c3-bebe-477428b46913}", |
| "32":"{3ff95315-1096-4d31-bd86-601d5438ad5e}", |
| "33":"{f7581ca4-d368-4eea-8f82-d48c64c4f047}", |
| "34":"{7A0C5812-2583-40D9-BCBB-CD7485F11377}", |
| } [major+minor] |
| |
| # Compute the name that Sphinx gives to the docfile |
| docfile = micro |
| if level < 0xf: |
| if level == 0xC: |
| docfile += "rc%s" % (serial,) |
| else: |
| docfile += '%x%s' % (level, serial) |
| docfile = 'python%s%s%s.chm' % (major, minor, docfile) |
| |
| # Build the mingw import library, libpythonXY.a |
| # This requires 'nm' and 'dlltool' executables on your PATH |
| def build_mingw_lib(lib_file, def_file, dll_file, mingw_lib): |
| warning = "WARNING: %s - libpythonXX.a not built" |
| nm = find_executable('nm') |
| dlltool = find_executable('dlltool') |
| |
| if not nm or not dlltool: |
| print(warning % "nm and/or dlltool were not found") |
| return False |
| |
| nm_command = '%s -Cs %s' % (nm, lib_file) |
| dlltool_command = "%s --dllname %s --def %s --output-lib %s" % \ |
| (dlltool, dll_file, def_file, mingw_lib) |
| export_match = re.compile(r"^_imp__(.*) in python\d+\.dll").match |
| |
| f = open(def_file,'w') |
| f.write("LIBRARY %s\n" % dll_file) |
| f.write("EXPORTS\n") |
| |
| nm_pipe = os.popen(nm_command) |
| for line in nm_pipe.readlines(): |
| m = export_match(line) |
| if m: |
| f.write(m.group(1)+"\n") |
| f.close() |
| exit = nm_pipe.close() |
| |
| if exit: |
| print(warning % "nm did not run successfully") |
| return False |
| |
| if os.system(dlltool_command) != 0: |
| print(warning % "dlltool did not run successfully") |
| return False |
| |
| return True |
| |
| # Target files (.def and .a) go in PCBuild directory |
| lib_file = os.path.join(srcdir, PCBUILD, "python%s%s.lib" % (major, minor)) |
| def_file = os.path.join(srcdir, PCBUILD, "python%s%s.def" % (major, minor)) |
| dll_file = "python%s%s.dll" % (major, minor) |
| mingw_lib = os.path.join(srcdir, PCBUILD, "libpython%s%s.a" % (major, minor)) |
| |
| have_mingw = build_mingw_lib(lib_file, def_file, dll_file, mingw_lib) |
| |
| # Determine the target architecture |
| if os.system("nmake /nologo /c /f msisupport.mak") != 0: |
| raise RuntimeError("'nmake /f msisupport.mak' failed") |
| dll_path = os.path.join(srcdir, PCBUILD, dll_file) |
| msilib.set_arch_from_file(dll_path) |
| if msilib.pe_type(dll_path) != msilib.pe_type("msisupport.dll"): |
| raise SystemError("msisupport.dll for incorrect architecture") |
| |
| if msilib.Win64: |
| upgrade_code = upgrade_code_64 |
| |
| if snapshot: |
| product_code = msilib.gen_uuid() |
| else: |
| # official release: generate UUID from the download link that the file will have |
| import uuid |
| product_code = uuid.uuid3(uuid.NAMESPACE_URL, |
| 'http://www.python.org/ftp/python/%s.%s.%s/python-%s%s.msi' % |
| (major, minor, micro, full_current_version, msilib.arch_ext)) |
| product_code = '{%s}' % product_code |
| |
| if testpackage: |
| ext = 'px' |
| testprefix = 'x' |
| else: |
| ext = 'py' |
| testprefix = '' |
| |
| if msilib.Win64: |
| SystemFolderName = "[System64Folder]" |
| registry_component = 4|256 |
| else: |
| SystemFolderName = "[SystemFolder]" |
| registry_component = 4 |
| |
| msilib.reset() |
| |
| # condition in which to install pythonxy.dll in system32: |
| # a) it is Windows 9x or |
| # b) it is NT, the user is privileged, and has chosen per-machine installation |
| sys32cond = "(Windows9x or (Privileged and ALLUSERS))" |
| |
| def build_database(): |
| """Generate an empty database, with just the schema and the |
| Summary information stream.""" |
| if snapshot: |
| uc = upgrade_code_snapshot |
| else: |
| uc = upgrade_code |
| if msilib.Win64: |
| productsuffix = " (64-bit)" |
| else: |
| productsuffix = "" |
| # schema represents the installer 2.0 database schema. |
| # sequence is the set of standard sequences |
| # (ui/execute, admin/advt/install) |
| msiname = "python-%s%s.msi" % (full_current_version, msilib.arch_ext) |
| db = msilib.init_database(msiname, |
| schema, ProductName="Python "+full_current_version+productsuffix, |
| ProductCode=product_code, |
| ProductVersion=current_version, |
| Manufacturer=u"Python Software Foundation", |
| request_uac = True) |
| # The default sequencing of the RemoveExistingProducts action causes |
| # removal of files that got just installed. Place it after |
| # InstallInitialize, so we first uninstall everything, but still roll |
| # back in case the installation is interrupted |
| msilib.change_sequence(sequence.InstallExecuteSequence, |
| "RemoveExistingProducts", 1510) |
| msilib.add_tables(db, sequence) |
| # We cannot set ALLUSERS in the property table, as this cannot be |
| # reset if the user choses a per-user installation. Instead, we |
| # maintain WhichUsers, which can be "ALL" or "JUSTME". The UI manages |
| # this property, and when the execution starts, ALLUSERS is set |
| # accordingly. |
| add_data(db, "Property", [("UpgradeCode", uc), |
| ("WhichUsers", "ALL"), |
| ("ProductLine", "Python%s%s" % (major, minor)), |
| ]) |
| db.Commit() |
| return db, msiname |
| |
| def remove_old_versions(db): |
| "Fill the upgrade table." |
| start = "%s.%s.0" % (major, minor) |
| # This requests that feature selection states of an older |
| # installation should be forwarded into this one. Upgrading |
| # requires that both the old and the new installation are |
| # either both per-machine or per-user. |
| migrate_features = 1 |
| # See "Upgrade Table". We remove releases with the same major and |
| # minor version. For an snapshot, we remove all earlier snapshots. For |
| # a release, we remove all snapshots, and all earlier releases. |
| if snapshot: |
| add_data(db, "Upgrade", |
| [(upgrade_code_snapshot, start, |
| current_version, |
| None, # Ignore language |
| migrate_features, |
| None, # Migrate ALL features |
| "REMOVEOLDSNAPSHOT")]) |
| props = "REMOVEOLDSNAPSHOT" |
| else: |
| add_data(db, "Upgrade", |
| [(upgrade_code, start, current_version, |
| None, migrate_features, None, "REMOVEOLDVERSION"), |
| (upgrade_code_snapshot, start, "%s.%d.0" % (major, int(minor)+1), |
| None, migrate_features, None, "REMOVEOLDSNAPSHOT")]) |
| props = "REMOVEOLDSNAPSHOT;REMOVEOLDVERSION" |
| |
| props += ";TARGETDIR;DLLDIR;LAUNCHERDIR" |
| # Installer collects the product codes of the earlier releases in |
| # these properties. In order to allow modification of the properties, |
| # they must be declared as secure. See "SecureCustomProperties Property" |
| add_data(db, "Property", [("SecureCustomProperties", props)]) |
| |
| class PyDialog(Dialog): |
| """Dialog class with a fixed layout: controls at the top, then a ruler, |
| then a list of buttons: back, next, cancel. Optionally a bitmap at the |
| left.""" |
| def __init__(self, *args, **kw): |
| """Dialog(database, name, x, y, w, h, attributes, title, first, |
| default, cancel, bitmap=true)""" |
| Dialog.__init__(self, *args) |
| ruler = self.h - 36 |
| bmwidth = 152*ruler/328 |
| if kw.get("bitmap", True): |
| self.bitmap("Bitmap", 0, 0, bmwidth, ruler, "PythonWin") |
| self.line("BottomLine", 0, ruler, self.w, 0) |
| |
| def title(self, title): |
| "Set the title text of the dialog at the top." |
| # name, x, y, w, h, flags=Visible|Enabled|Transparent|NoPrefix, |
| # text, in VerdanaBold10 |
| self.text("Title", 135, 10, 220, 60, 0x30003, |
| r"{\VerdanaBold10}%s" % title) |
| |
| def back(self, title, next, name = "Back", active = 1): |
| """Add a back button with a given title, the tab-next button, |
| its name in the Control table, possibly initially disabled. |
| |
| Return the button, so that events can be associated""" |
| if active: |
| flags = 3 # Visible|Enabled |
| else: |
| flags = 1 # Visible |
| return self.pushbutton(name, 180, self.h-27 , 56, 17, flags, title, next) |
| |
| def cancel(self, title, next, name = "Cancel", active = 1): |
| """Add a cancel button with a given title, the tab-next button, |
| its name in the Control table, possibly initially disabled. |
| |
| Return the button, so that events can be associated""" |
| if active: |
| flags = 3 # Visible|Enabled |
| else: |
| flags = 1 # Visible |
| return self.pushbutton(name, 304, self.h-27, 56, 17, flags, title, next) |
| |
| def next(self, title, next, name = "Next", active = 1): |
| """Add a Next button with a given title, the tab-next button, |
| its name in the Control table, possibly initially disabled. |
| |
| Return the button, so that events can be associated""" |
| if active: |
| flags = 3 # Visible|Enabled |
| else: |
| flags = 1 # Visible |
| return self.pushbutton(name, 236, self.h-27, 56, 17, flags, title, next) |
| |
| def xbutton(self, name, title, next, xpos): |
| """Add a button with a given title, the tab-next button, |
| its name in the Control table, giving its x position; the |
| y-position is aligned with the other buttons. |
| |
| Return the button, so that events can be associated""" |
| return self.pushbutton(name, int(self.w*xpos - 28), self.h-27, 56, 17, 3, title, next) |
| |
| def add_ui(db): |
| x = y = 50 |
| w = 370 |
| h = 300 |
| title = "[ProductName] Setup" |
| |
| # see "Dialog Style Bits" |
| modal = 3 # visible | modal |
| modeless = 1 # visible |
| track_disk_space = 32 |
| |
| add_data(db, 'ActionText', uisample.ActionText) |
| add_data(db, 'UIText', uisample.UIText) |
| |
| # Bitmaps |
| if not os.path.exists(srcdir+r"\PC\python_icon.exe"): |
| raise RuntimeError("Run icons.mak in PC directory") |
| add_data(db, "Binary", |
| [("PythonWin", msilib.Binary(r"%s\PCbuild\installer.bmp" % srcdir)), # 152x328 pixels |
| ("py.ico",msilib.Binary(srcdir+r"\PC\py.ico")), |
| ]) |
| add_data(db, "Icon", |
| [("python_icon.exe", msilib.Binary(srcdir+r"\PC\python_icon.exe"))]) |
| |
| # Scripts |
| # CheckDir sets TargetExists if TARGETDIR exists. |
| # UpdateEditIDLE sets the REGISTRY.tcl component into |
| # the installed/uninstalled state according to both the |
| # Extensions and TclTk features. |
| add_data(db, "Binary", [("Script", msilib.Binary("msisupport.dll"))]) |
| # See "Custom Action Type 1" |
| if msilib.Win64: |
| CheckDir = "CheckDir" |
| UpdateEditIDLE = "UpdateEditIDLE" |
| else: |
| CheckDir = "_CheckDir@4" |
| UpdateEditIDLE = "_UpdateEditIDLE@4" |
| add_data(db, "CustomAction", |
| [("CheckDir", 1, "Script", CheckDir)]) |
| if have_tcl: |
| add_data(db, "CustomAction", |
| [("UpdateEditIDLE", 1, "Script", UpdateEditIDLE)]) |
| |
| # UI customization properties |
| add_data(db, "Property", |
| # See "DefaultUIFont Property" |
| [("DefaultUIFont", "DlgFont8"), |
| # See "ErrorDialog Style Bit" |
| ("ErrorDialog", "ErrorDlg"), |
| ("Progress1", "Install"), # modified in maintenance type dlg |
| ("Progress2", "installs"), |
| ("MaintenanceForm_Action", "Repair")]) |
| |
| # Fonts, see "TextStyle Table" |
| add_data(db, "TextStyle", |
| [("DlgFont8", "Tahoma", 9, None, 0), |
| ("DlgFontBold8", "Tahoma", 8, None, 1), #bold |
| ("VerdanaBold10", "Verdana", 10, None, 1), |
| ("VerdanaRed9", "Verdana", 9, 255, 0), |
| ]) |
| |
| compileargs = r'-Wi "[TARGETDIR]Lib\compileall.py" -f -x "bad_coding|badsyntax|site-packages|py2_|lib2to3\\tests|venv\\scripts" "[TARGETDIR]Lib"' |
| lib2to3args = r'-c "import lib2to3.pygram, lib2to3.patcomp;lib2to3.patcomp.PatternCompiler()"' |
| # See "CustomAction Table" |
| add_data(db, "CustomAction", [ |
| # msidbCustomActionTypeFirstSequence + msidbCustomActionTypeTextData + msidbCustomActionTypeProperty |
| # See "Custom Action Type 51", |
| # "Custom Action Execution Scheduling Options" |
| ("InitialTargetDir", 307, "TARGETDIR", |
| "[WindowsVolume]Python%s%s" % (major, minor)), |
| ("SetDLLDirToTarget", 307, "DLLDIR", "[TARGETDIR]"), |
| ("SetDLLDirToSystem32", 307, "DLLDIR", SystemFolderName), |
| ("SetLauncherDirToTarget", 307, "LAUNCHERDIR", "[TARGETDIR]"), |
| ("SetLauncherDirToWindows", 307, "LAUNCHERDIR", "[WindowsFolder]"), |
| # msidbCustomActionTypeExe + msidbCustomActionTypeSourceFile |
| # See "Custom Action Type 18" |
| ("CompilePyc", 18, "python.exe", compileargs), |
| ("CompilePyo", 18, "python.exe", "-O "+compileargs), |
| ("CompileGrammar", 18, "python.exe", lib2to3args), |
| ]) |
| |
| # UI Sequences, see "InstallUISequence Table", "Using a Sequence Table" |
| # Numbers indicate sequence; see sequence.py for how these action integrate |
| add_data(db, "InstallUISequence", |
| [("PrepareDlg", "Not Privileged or Windows9x or Installed", 140), |
| ("WhichUsersDlg", "Privileged and not Windows9x and not Installed", 141), |
| ("InitialTargetDir", 'TARGETDIR=""', 750), |
| # In the user interface, assume all-users installation if privileged. |
| ("SetDLLDirToSystem32", 'DLLDIR="" and ' + sys32cond, 751), |
| ("SetDLLDirToTarget", 'DLLDIR="" and not ' + sys32cond, 752), |
| ("SetLauncherDirToWindows", 'LAUNCHERDIR="" and ' + sys32cond, 753), |
| ("SetLauncherDirToTarget", 'LAUNCHERDIR="" and not ' + sys32cond, 754), |
| ("SelectDirectoryDlg", "Not Installed", 1230), |
| # XXX no support for resume installations yet |
| #("ResumeDlg", "Installed AND (RESUME OR Preselected)", 1240), |
| ("MaintenanceTypeDlg", "Installed AND NOT RESUME AND NOT Preselected", 1250), |
| ("ProgressDlg", None, 1280)]) |
| add_data(db, "AdminUISequence", |
| [("InitialTargetDir", 'TARGETDIR=""', 750), |
| ("SetDLLDirToTarget", 'DLLDIR=""', 751), |
| ("SetLauncherDirToTarget", 'LAUNCHERDIR=""', 752), |
| ]) |
| |
| # Prepend TARGETDIR to the system path, and remove it on uninstall. |
| add_data(db, "Environment", |
| [("PathAddition", "=-*Path", "[TARGETDIR];[~]", "REGISTRY.path")]) |
| |
| # Execute Sequences |
| add_data(db, "InstallExecuteSequence", |
| [("InitialTargetDir", 'TARGETDIR=""', 750), |
| ("SetDLLDirToSystem32", 'DLLDIR="" and ' + sys32cond, 751), |
| ("SetDLLDirToTarget", 'DLLDIR="" and not ' + sys32cond, 752), |
| ("SetLauncherDirToWindows", 'LAUNCHERDIR="" and ' + sys32cond, 753), |
| ("SetLauncherDirToTarget", 'LAUNCHERDIR="" and not ' + sys32cond, 754), |
| ("UpdateEditIDLE", None, 1050), |
| ("CompilePyc", "COMPILEALL", 6800), |
| ("CompilePyo", "COMPILEALL", 6801), |
| ("CompileGrammar", "COMPILEALL", 6802), |
| ]) |
| add_data(db, "AdminExecuteSequence", |
| [("InitialTargetDir", 'TARGETDIR=""', 750), |
| ("SetDLLDirToTarget", 'DLLDIR=""', 751), |
| ("SetLauncherDirToTarget", 'LAUNCHERDIR=""', 752), |
| ("CompilePyc", "COMPILEALL", 6800), |
| ("CompilePyo", "COMPILEALL", 6801), |
| ("CompileGrammar", "COMPILEALL", 6802), |
| ]) |
| |
| ##################################################################### |
| # Standard dialogs: FatalError, UserExit, ExitDialog |
| fatal=PyDialog(db, "FatalError", x, y, w, h, modal, title, |
| "Finish", "Finish", "Finish") |
| fatal.title("[ProductName] Installer ended prematurely") |
| fatal.back("< Back", "Finish", active = 0) |
| fatal.cancel("Cancel", "Back", active = 0) |
| fatal.text("Description1", 135, 70, 220, 80, 0x30003, |
| "[ProductName] setup ended prematurely because of an error. Your system has not been modified. To install this program at a later time, please run the installation again.") |
| fatal.text("Description2", 135, 155, 220, 20, 0x30003, |
| "Click the Finish button to exit the Installer.") |
| c=fatal.next("Finish", "Cancel", name="Finish") |
| # See "ControlEvent Table". Parameters are the event, the parameter |
| # to the action, and optionally the condition for the event, and the order |
| # of events. |
| c.event("EndDialog", "Exit") |
| |
| user_exit=PyDialog(db, "UserExit", x, y, w, h, modal, title, |
| "Finish", "Finish", "Finish") |
| user_exit.title("[ProductName] Installer was interrupted") |
| user_exit.back("< Back", "Finish", active = 0) |
| user_exit.cancel("Cancel", "Back", active = 0) |
| user_exit.text("Description1", 135, 70, 220, 80, 0x30003, |
| "[ProductName] setup was interrupted. Your system has not been modified. " |
| "To install this program at a later time, please run the installation again.") |
| user_exit.text("Description2", 135, 155, 220, 20, 0x30003, |
| "Click the Finish button to exit the Installer.") |
| c = user_exit.next("Finish", "Cancel", name="Finish") |
| c.event("EndDialog", "Exit") |
| |
| exit_dialog = PyDialog(db, "ExitDialog", x, y, w, h, modal, title, |
| "Finish", "Finish", "Finish") |
| exit_dialog.title("Complete the [ProductName] Installer") |
| exit_dialog.back("< Back", "Finish", active = 0) |
| exit_dialog.cancel("Cancel", "Back", active = 0) |
| exit_dialog.text("Acknowledgements", 135, 95, 220, 120, 0x30003, |
| "Special Windows thanks to:\n" |
| " Mark Hammond, without whose years of freely \n" |
| " shared Windows expertise, Python for Windows \n" |
| " would still be Python for DOS.") |
| |
| c = exit_dialog.text("warning", 135, 200, 220, 40, 0x30003, |
| "{\\VerdanaRed9}Warning: Python 2.5.x is the last " |
| "Python release for Windows 9x.") |
| c.condition("Hide", "NOT Version9X") |
| |
| exit_dialog.text("Description", 135, 235, 220, 20, 0x30003, |
| "Click the Finish button to exit the Installer.") |
| c = exit_dialog.next("Finish", "Cancel", name="Finish") |
| c.event("EndDialog", "Return") |
| |
| ##################################################################### |
| # Required dialog: FilesInUse, ErrorDlg |
| inuse = PyDialog(db, "FilesInUse", |
| x, y, w, h, |
| 19, # KeepModeless|Modal|Visible |
| title, |
| "Retry", "Retry", "Retry", bitmap=False) |
| inuse.text("Title", 15, 6, 200, 15, 0x30003, |
| r"{\DlgFontBold8}Files in Use") |
| inuse.text("Description", 20, 23, 280, 20, 0x30003, |
| "Some files that need to be updated are currently in use.") |
| inuse.text("Text", 20, 55, 330, 50, 3, |
| "The following applications are using files that need to be updated by this setup. Close these applications and then click Retry to continue the installation or Cancel to exit it.") |
| inuse.control("List", "ListBox", 20, 107, 330, 130, 7, "FileInUseProcess", |
| None, None, None) |
| c=inuse.back("Exit", "Ignore", name="Exit") |
| c.event("EndDialog", "Exit") |
| c=inuse.next("Ignore", "Retry", name="Ignore") |
| c.event("EndDialog", "Ignore") |
| c=inuse.cancel("Retry", "Exit", name="Retry") |
| c.event("EndDialog","Retry") |
| |
| |
| # See "Error Dialog". See "ICE20" for the required names of the controls. |
| error = Dialog(db, "ErrorDlg", |
| 50, 10, 330, 101, |
| 65543, # Error|Minimize|Modal|Visible |
| title, |
| "ErrorText", None, None) |
| error.text("ErrorText", 50,9,280,48,3, "") |
| error.control("ErrorIcon", "Icon", 15, 9, 24, 24, 5242881, None, "py.ico", None, None) |
| error.pushbutton("N",120,72,81,21,3,"No",None).event("EndDialog","ErrorNo") |
| error.pushbutton("Y",240,72,81,21,3,"Yes",None).event("EndDialog","ErrorYes") |
| error.pushbutton("A",0,72,81,21,3,"Abort",None).event("EndDialog","ErrorAbort") |
| error.pushbutton("C",42,72,81,21,3,"Cancel",None).event("EndDialog","ErrorCancel") |
| error.pushbutton("I",81,72,81,21,3,"Ignore",None).event("EndDialog","ErrorIgnore") |
| error.pushbutton("O",159,72,81,21,3,"Ok",None).event("EndDialog","ErrorOk") |
| error.pushbutton("R",198,72,81,21,3,"Retry",None).event("EndDialog","ErrorRetry") |
| |
| ##################################################################### |
| # Global "Query Cancel" dialog |
| cancel = Dialog(db, "CancelDlg", 50, 10, 260, 85, 3, title, |
| "No", "No", "No") |
| cancel.text("Text", 48, 15, 194, 30, 3, |
| "Are you sure you want to cancel [ProductName] installation?") |
| cancel.control("Icon", "Icon", 15, 15, 24, 24, 5242881, None, |
| "py.ico", None, None) |
| c=cancel.pushbutton("Yes", 72, 57, 56, 17, 3, "Yes", "No") |
| c.event("EndDialog", "Exit") |
| |
| c=cancel.pushbutton("No", 132, 57, 56, 17, 3, "No", "Yes") |
| c.event("EndDialog", "Return") |
| |
| ##################################################################### |
| # Global "Wait for costing" dialog |
| costing = Dialog(db, "WaitForCostingDlg", 50, 10, 260, 85, modal, title, |
| "Return", "Return", "Return") |
| costing.text("Text", 48, 15, 194, 30, 3, |
| "Please wait while the installer finishes determining your disk space requirements.") |
| costing.control("Icon", "Icon", 15, 15, 24, 24, 5242881, None, |
| "py.ico", None, None) |
| c = costing.pushbutton("Return", 102, 57, 56, 17, 3, "Return", None) |
| c.event("EndDialog", "Exit") |
| |
| ##################################################################### |
| # Preparation dialog: no user input except cancellation |
| prep = PyDialog(db, "PrepareDlg", x, y, w, h, modeless, title, |
| "Cancel", "Cancel", "Cancel") |
| prep.text("Description", 135, 70, 220, 40, 0x30003, |
| "Please wait while the Installer prepares to guide you through the installation.") |
| prep.title("Welcome to the [ProductName] Installer") |
| c=prep.text("ActionText", 135, 110, 220, 20, 0x30003, "Pondering...") |
| c.mapping("ActionText", "Text") |
| c=prep.text("ActionData", 135, 135, 220, 30, 0x30003, None) |
| c.mapping("ActionData", "Text") |
| prep.back("Back", None, active=0) |
| prep.next("Next", None, active=0) |
| c=prep.cancel("Cancel", None) |
| c.event("SpawnDialog", "CancelDlg") |
| |
| ##################################################################### |
| # Target directory selection |
| seldlg = PyDialog(db, "SelectDirectoryDlg", x, y, w, h, modal, title, |
| "Next", "Next", "Cancel") |
| seldlg.title("Select Destination Directory") |
| c = seldlg.text("Existing", 135, 25, 235, 30, 0x30003, |
| "{\VerdanaRed9}This update will replace your existing [ProductLine] installation.") |
| c.condition("Hide", 'REMOVEOLDVERSION="" and REMOVEOLDSNAPSHOT=""') |
| seldlg.text("Description", 135, 50, 220, 40, 0x30003, |
| "Please select a directory for the [ProductName] files.") |
| |
| seldlg.back("< Back", None, active=0) |
| c = seldlg.next("Next >", "Cancel") |
| c.event("DoAction", "CheckDir", "TargetExistsOk<>1", order=1) |
| # If the target exists, but we found that we are going to remove old versions, don't bother |
| # confirming that the target directory exists. Strictly speaking, we should determine that |
| # the target directory is indeed the target of the product that we are going to remove, but |
| # I don't know how to do that. |
| c.event("SpawnDialog", "ExistingDirectoryDlg", 'TargetExists=1 and REMOVEOLDVERSION="" and REMOVEOLDSNAPSHOT=""', 2) |
| c.event("SetTargetPath", "TARGETDIR", 'TargetExists=0 or REMOVEOLDVERSION<>"" or REMOVEOLDSNAPSHOT<>""', 3) |
| c.event("SpawnWaitDialog", "WaitForCostingDlg", "CostingComplete=1", 4) |
| c.event("NewDialog", "SelectFeaturesDlg", 'TargetExists=0 or REMOVEOLDVERSION<>"" or REMOVEOLDSNAPSHOT<>""', 5) |
| |
| c = seldlg.cancel("Cancel", "DirectoryCombo") |
| c.event("SpawnDialog", "CancelDlg") |
| |
| seldlg.control("DirectoryCombo", "DirectoryCombo", 135, 70, 172, 80, 393219, |
| "TARGETDIR", None, "DirectoryList", None) |
| seldlg.control("DirectoryList", "DirectoryList", 135, 90, 208, 136, 3, "TARGETDIR", |
| None, "PathEdit", None) |
| seldlg.control("PathEdit", "PathEdit", 135, 230, 206, 16, 3, "TARGETDIR", None, "Next", None) |
| c = seldlg.pushbutton("Up", 306, 70, 18, 18, 3, "Up", None) |
| c.event("DirectoryListUp", "0") |
| c = seldlg.pushbutton("NewDir", 324, 70, 30, 18, 3, "New", None) |
| c.event("DirectoryListNew", "0") |
| |
| ##################################################################### |
| # SelectFeaturesDlg |
| features = PyDialog(db, "SelectFeaturesDlg", x, y, w, h, modal|track_disk_space, |
| title, "Tree", "Next", "Cancel") |
| features.title("Customize [ProductName]") |
| features.text("Description", 135, 35, 220, 15, 0x30003, |
| "Select the way you want features to be installed.") |
| features.text("Text", 135,45,220,30, 3, |
| "Click on the icons in the tree below to change the way features will be installed.") |
| |
| c=features.back("< Back", "Next") |
| c.event("NewDialog", "SelectDirectoryDlg") |
| |
| c=features.next("Next >", "Cancel") |
| c.mapping("SelectionNoItems", "Enabled") |
| c.event("SpawnDialog", "DiskCostDlg", "OutOfDiskSpace=1", order=1) |
| c.event("EndDialog", "Return", "OutOfDiskSpace<>1", order=2) |
| |
| c=features.cancel("Cancel", "Tree") |
| c.event("SpawnDialog", "CancelDlg") |
| |
| # The browse property is not used, since we have only a single target path (selected already) |
| features.control("Tree", "SelectionTree", 135, 75, 220, 95, 7, "_BrowseProperty", |
| "Tree of selections", "Back", None) |
| |
| #c=features.pushbutton("Reset", 42, 243, 56, 17, 3, "Reset", "DiskCost") |
| #c.mapping("SelectionNoItems", "Enabled") |
| #c.event("Reset", "0") |
| |
| features.control("Box", "GroupBox", 135, 170, 225, 90, 1, None, None, None, None) |
| |
| c=features.xbutton("DiskCost", "Disk &Usage", None, 0.10) |
| c.mapping("SelectionNoItems","Enabled") |
| c.event("SpawnDialog", "DiskCostDlg") |
| |
| c=features.xbutton("Advanced", "Advanced", None, 0.30) |
| c.event("SpawnDialog", "AdvancedDlg") |
| |
| c=features.text("ItemDescription", 140, 180, 210, 40, 3, |
| "Multiline description of the currently selected item.") |
| c.mapping("SelectionDescription","Text") |
| |
| c=features.text("ItemSize", 140, 225, 210, 33, 3, |
| "The size of the currently selected item.") |
| c.mapping("SelectionSize", "Text") |
| |
| ##################################################################### |
| # Disk cost |
| cost = PyDialog(db, "DiskCostDlg", x, y, w, h, modal, title, |
| "OK", "OK", "OK", bitmap=False) |
| cost.text("Title", 15, 6, 200, 15, 0x30003, |
| "{\DlgFontBold8}Disk Space Requirements") |
| cost.text("Description", 20, 20, 280, 20, 0x30003, |
| "The disk space required for the installation of the selected features.") |
| cost.text("Text", 20, 53, 330, 60, 3, |
| "The highlighted volumes (if any) do not have enough disk space " |
| "available for the currently selected features. You can either " |
| "remove some files from the highlighted volumes, or choose to " |
| "install less features onto local drive(s), or select different " |
| "destination drive(s).") |
| cost.control("VolumeList", "VolumeCostList", 20, 100, 330, 150, 393223, |
| None, "{120}{70}{70}{70}{70}", None, None) |
| cost.xbutton("OK", "Ok", None, 0.5).event("EndDialog", "Return") |
| |
| ##################################################################### |
| # WhichUsers Dialog. Only available on NT, and for privileged users. |
| # This must be run before FindRelatedProducts, because that will |
| # take into account whether the previous installation was per-user |
| # or per-machine. We currently don't support going back to this |
| # dialog after "Next" was selected; to support this, we would need to |
| # find how to reset the ALLUSERS property, and how to re-run |
| # FindRelatedProducts. |
| # On Windows9x, the ALLUSERS property is ignored on the command line |
| # and in the Property table, but installer fails according to the documentation |
| # if a dialog attempts to set ALLUSERS. |
| whichusers = PyDialog(db, "WhichUsersDlg", x, y, w, h, modal, title, |
| "AdminInstall", "Next", "Cancel") |
| whichusers.title("Select whether to install [ProductName] for all users of this computer.") |
| # A radio group with two options: allusers, justme |
| g = whichusers.radiogroup("AdminInstall", 135, 60, 235, 80, 3, |
| "WhichUsers", "", "Next") |
| g.condition("Disable", "VersionNT=600") # Not available on Vista and Windows 2008 |
| g.add("ALL", 0, 5, 150, 20, "Install for all users") |
| g.add("JUSTME", 0, 25, 235, 20, "Install just for me (not available on Windows Vista)") |
| |
| whichusers.back("Back", None, active=0) |
| |
| c = whichusers.next("Next >", "Cancel") |
| c.event("[ALLUSERS]", "1", 'WhichUsers="ALL"', 1) |
| c.event("EndDialog", "Return", order = 2) |
| |
| c = whichusers.cancel("Cancel", "AdminInstall") |
| c.event("SpawnDialog", "CancelDlg") |
| |
| ##################################################################### |
| # Advanced Dialog. |
| advanced = PyDialog(db, "AdvancedDlg", x, y, w, h, modal, title, |
| "CompilePyc", "Ok", "Ok") |
| advanced.title("Advanced Options for [ProductName]") |
| # A radio group with two options: allusers, justme |
| advanced.checkbox("CompilePyc", 135, 60, 230, 50, 3, |
| "COMPILEALL", "Compile .py files to byte code after installation", "Ok") |
| |
| c = advanced.cancel("Ok", "CompilePyc", name="Ok") # Button just has location of cancel button. |
| c.event("EndDialog", "Return") |
| |
| ##################################################################### |
| # Existing Directory dialog |
| dlg = Dialog(db, "ExistingDirectoryDlg", 50, 30, 200, 80, modal, title, |
| "No", "No", "No") |
| dlg.text("Title", 10, 20, 180, 40, 3, |
| "[TARGETDIR] exists. Are you sure you want to overwrite existing files?") |
| c=dlg.pushbutton("Yes", 30, 60, 55, 17, 3, "Yes", "No") |
| c.event("[TargetExists]", "0", order=1) |
| c.event("[TargetExistsOk]", "1", order=2) |
| c.event("EndDialog", "Return", order=3) |
| c=dlg.pushbutton("No", 115, 60, 55, 17, 3, "No", "Yes") |
| c.event("EndDialog", "Return") |
| |
| ##################################################################### |
| # Installation Progress dialog (modeless) |
| progress = PyDialog(db, "ProgressDlg", x, y, w, h, modeless, title, |
| "Cancel", "Cancel", "Cancel", bitmap=False) |
| progress.text("Title", 20, 15, 200, 15, 0x30003, |
| "{\DlgFontBold8}[Progress1] [ProductName]") |
| progress.text("Text", 35, 65, 300, 30, 3, |
| "Please wait while the Installer [Progress2] [ProductName]. " |
| "This may take several minutes.") |
| progress.text("StatusLabel", 35, 100, 35, 20, 3, "Status:") |
| |
| c=progress.text("ActionText", 70, 100, w-70, 20, 3, "Pondering...") |
| c.mapping("ActionText", "Text") |
| |
| #c=progress.text("ActionData", 35, 140, 300, 20, 3, None) |
| #c.mapping("ActionData", "Text") |
| |
| c=progress.control("ProgressBar", "ProgressBar", 35, 120, 300, 10, 65537, |
| None, "Progress done", None, None) |
| c.mapping("SetProgress", "Progress") |
| |
| progress.back("< Back", "Next", active=False) |
| progress.next("Next >", "Cancel", active=False) |
| progress.cancel("Cancel", "Back").event("SpawnDialog", "CancelDlg") |
| |
| # Maintenance type: repair/uninstall |
| maint = PyDialog(db, "MaintenanceTypeDlg", x, y, w, h, modal, title, |
| "Next", "Next", "Cancel") |
| maint.title("Welcome to the [ProductName] Setup Wizard") |
| maint.text("BodyText", 135, 63, 230, 42, 3, |
| "Select whether you want to repair or remove [ProductName].") |
| g=maint.radiogroup("RepairRadioGroup", 135, 108, 230, 60, 3, |
| "MaintenanceForm_Action", "", "Next") |
| g.add("Change", 0, 0, 200, 17, "&Change [ProductName]") |
| g.add("Repair", 0, 18, 200, 17, "&Repair [ProductName]") |
| g.add("Remove", 0, 36, 200, 17, "Re&move [ProductName]") |
| |
| maint.back("< Back", None, active=False) |
| c=maint.next("Finish", "Cancel") |
| # Change installation: Change progress dialog to "Change", then ask |
| # for feature selection |
| c.event("[Progress1]", "Change", 'MaintenanceForm_Action="Change"', 1) |
| c.event("[Progress2]", "changes", 'MaintenanceForm_Action="Change"', 2) |
| |
| # Reinstall: Change progress dialog to "Repair", then invoke reinstall |
| # Also set list of reinstalled features to "ALL" |
| c.event("[REINSTALL]", "ALL", 'MaintenanceForm_Action="Repair"', 5) |
| c.event("[Progress1]", "Repairing", 'MaintenanceForm_Action="Repair"', 6) |
| c.event("[Progress2]", "repairs", 'MaintenanceForm_Action="Repair"', 7) |
| c.event("Reinstall", "ALL", 'MaintenanceForm_Action="Repair"', 8) |
| |
| # Uninstall: Change progress to "Remove", then invoke uninstall |
| # Also set list of removed features to "ALL" |
| c.event("[REMOVE]", "ALL", 'MaintenanceForm_Action="Remove"', 11) |
| c.event("[Progress1]", "Removing", 'MaintenanceForm_Action="Remove"', 12) |
| c.event("[Progress2]", "removes", 'MaintenanceForm_Action="Remove"', 13) |
| c.event("Remove", "ALL", 'MaintenanceForm_Action="Remove"', 14) |
| |
| # Close dialog when maintenance action scheduled |
| c.event("EndDialog", "Return", 'MaintenanceForm_Action<>"Change"', 20) |
| c.event("NewDialog", "SelectFeaturesDlg", 'MaintenanceForm_Action="Change"', 21) |
| |
| maint.cancel("Cancel", "RepairRadioGroup").event("SpawnDialog", "CancelDlg") |
| |
| |
| # See "Feature Table". The feature level is 1 for all features, |
| # and the feature attributes are 0 for the DefaultFeature, and |
| # FollowParent for all other features. The numbers are the Display |
| # column. |
| def add_features(db): |
| # feature attributes: |
| # msidbFeatureAttributesFollowParent == 2 |
| # msidbFeatureAttributesDisallowAdvertise == 8 |
| # Features that need to be installed with together with the main feature |
| # (i.e. additional Python libraries) need to follow the parent feature. |
| # Features that have no advertisement trigger (e.g. the test suite) |
| # must not support advertisement |
| global default_feature, tcltk, htmlfiles, tools, testsuite, ext_feature, private_crt, prepend_path |
| default_feature = Feature(db, "DefaultFeature", "Python", |
| "Python Interpreter and Libraries", |
| 1, directory = "TARGETDIR") |
| shared_crt = Feature(db, "SharedCRT", "MSVCRT", "C Run-Time (system-wide)", 0, |
| level=0) |
| private_crt = Feature(db, "PrivateCRT", "MSVCRT", "C Run-Time (private)", 0, |
| level=0) |
| add_data(db, "Condition", [("SharedCRT", 1, sys32cond), |
| ("PrivateCRT", 1, "not "+sys32cond)]) |
| # We don't support advertisement of extensions |
| ext_feature = Feature(db, "Extensions", "Register Extensions", |
| "Make this Python installation the default Python installation", 3, |
| parent = default_feature, attributes=2|8) |
| if have_tcl: |
| tcltk = Feature(db, "TclTk", "Tcl/Tk", "Tkinter, IDLE, pydoc", 5, |
| parent = default_feature, attributes=2) |
| htmlfiles = Feature(db, "Documentation", "Documentation", |
| "Python HTMLHelp File", 7, parent = default_feature) |
| tools = Feature(db, "Tools", "Utility Scripts", |
| "Python utility scripts (Tools/)", 9, |
| parent = default_feature, attributes=2) |
| testsuite = Feature(db, "Testsuite", "Test suite", |
| "Python test suite (Lib/test/)", 11, |
| parent = default_feature, attributes=2|8) |
| # prepend_path is an additional feature which is to be off by default. |
| # Since the default level for the above features is 1, this needs to be |
| # at least level higher. |
| prepend_path = Feature(db, "PrependPath", "Add python.exe to Path", |
| "Prepend [TARGETDIR] to the system Path variable. " |
| "This allows you to type 'python' into a command " |
| "prompt without needing the full path.", 13, |
| parent = default_feature, attributes=2|8, |
| level=2) |
| |
| def extract_msvcr100(): |
| # Find the redistributable files |
| if msilib.Win64: |
| arch = "x64" |
| else: |
| arch = "x86" |
| dir = os.path.join(os.environ['VS100COMNTOOLS'], r"..\..\VC\redist\%s\Microsoft.VC100.CRT" % arch) |
| |
| result = [] |
| installer = msilib.MakeInstaller() |
| # At least for VS2010, manifests are no longer provided |
| name = "msvcr100.dll" |
| path = os.path.join(dir, name) |
| kw = {'src':path} |
| kw['version'] = installer.FileVersion(path, 0) |
| kw['language'] = installer.FileVersion(path, 1) |
| return name, kw |
| |
| def generate_license(): |
| import shutil, glob |
| out = open("LICENSE.txt", "w") |
| shutil.copyfileobj(open(os.path.join(srcdir, "LICENSE")), out) |
| shutil.copyfileobj(open("crtlicense.txt"), out) |
| for name, pat, file in (("bzip2","bzip2-*", "LICENSE"), |
| ("openssl", "openssl-*", "LICENSE"), |
| ("Tcl", "tcl8*", "license.terms"), |
| ("Tk", "tk8*", "license.terms"), |
| ("Tix", "tix-*", "license.terms")): |
| out.write("\nThis copy of Python includes a copy of %s, which is licensed under the following terms:\n\n" % name) |
| dirs = glob.glob(srcdir+"/../"+pat) |
| if not dirs: |
| raise ValueError, "Could not find "+srcdir+"/../"+pat |
| if len(dirs) > 2 and not snapshot: |
| raise ValueError, "Multiple copies of "+pat |
| dir = dirs[0] |
| shutil.copyfileobj(open(os.path.join(dir, file)), out) |
| out.close() |
| |
| |
| class PyDirectory(Directory): |
| """By default, all components in the Python installer |
| can run from source.""" |
| def __init__(self, *args, **kw): |
| if "componentflags" not in kw: |
| kw['componentflags'] = 2 #msidbComponentAttributesOptional |
| Directory.__init__(self, *args, **kw) |
| |
| def hgmanifest(): |
| # Fetch file list from Mercurial |
| process = subprocess.Popen(['hg', 'manifest'], stdout=subprocess.PIPE) |
| stdout, stderr = process.communicate() |
| # Create nested directories for file tree |
| result = {} |
| for line in stdout.splitlines(): |
| components = line.split('/') |
| d = result |
| while len(components) > 1: |
| d1 = d.setdefault(components[0], {}) |
| d = d1 |
| del components[0] |
| d[components[0]] = None |
| return result |
| |
| |
| # See "File Table", "Component Table", "Directory Table", |
| # "FeatureComponents Table" |
| def add_files(db): |
| installer = msilib.MakeInstaller() |
| hgfiles = hgmanifest() |
| cab = CAB("python") |
| tmpfiles = [] |
| # Add all executables, icons, text files into the TARGETDIR component |
| root = PyDirectory(db, cab, None, srcdir, "TARGETDIR", "SourceDir") |
| default_feature.set_current() |
| root.add_file("README.txt", src="README") |
| root.add_file("NEWS.txt", src="Misc/NEWS") |
| generate_license() |
| root.add_file("LICENSE.txt", src=os.path.abspath("LICENSE.txt")) |
| root.start_component("python.exe", keyfile="python.exe") |
| root.add_file("%s/python.exe" % PCBUILD) |
| root.start_component("pythonw.exe", keyfile="pythonw.exe") |
| root.add_file("%s/pythonw.exe" % PCBUILD) |
| |
| # msidbComponentAttributesSharedDllRefCount = 8, see "Component Table" |
| dlldir = PyDirectory(db, cab, root, srcdir, "DLLDIR", ".") |
| launcherdir = PyDirectory(db, cab, root, srcdir, "LAUNCHERDIR", ".") |
| |
| # msidbComponentAttributes64bit = 256; this disables registry redirection |
| # to allow setting the SharedDLLs key in the 64-bit portion even for a |
| # 32-bit installer. |
| # XXX does this still allow to install the component on a 32-bit system? |
| # Pick up 32-bit binary always |
| launchersrc = PCBUILD |
| if launchersrc.lower() == 'pcbuild\\x64-pgo': |
| launchersrc = 'PCBuild\\win32-pgo' |
| if launchersrc.lower() == 'pcbuild\\amd64': |
| launchersrc = 'PCBuild' |
| launcher = os.path.join(srcdir, launchersrc, "py.exe") |
| launcherdir.start_component("launcher", flags = 8+256, keyfile="py.exe") |
| launcherdir.add_file(launcher, |
| version=installer.FileVersion(launcher, 0), |
| language=installer.FileVersion(launcher, 1)) |
| launcherw = os.path.join(srcdir, launchersrc, "pyw.exe") |
| launcherdir.start_component("launcherw", flags = 8+256, keyfile="pyw.exe") |
| launcherdir.add_file(launcherw, |
| version=installer.FileVersion(launcherw, 0), |
| language=installer.FileVersion(launcherw, 1)) |
| |
| pydll = "python%s%s.dll" % (major, minor) |
| pydllsrc = os.path.join(srcdir, PCBUILD, pydll) |
| dlldir.start_component("DLLDIR", flags = 8, keyfile = pydll, uuid = pythondll_uuid) |
| pyversion = installer.FileVersion(pydllsrc, 0) |
| if not snapshot: |
| # For releases, the Python DLL has the same version as the |
| # installer package. |
| assert pyversion.split(".")[:3] == current_version.split(".") |
| dlldir.add_file("%s/python%s%s.dll" % (PCBUILD, major, minor), |
| version=pyversion, |
| language=installer.FileVersion(pydllsrc, 1)) |
| DLLs = PyDirectory(db, cab, root, srcdir + "/" + PCBUILD, "DLLs", "DLLS|DLLs") |
| |
| # msvcr90.dll: Need to place the DLL and the manifest into the root directory, |
| # plus another copy of the manifest in the DLLs directory, with the manifest |
| # pointing to the root directory |
| root.start_component("msvcr90", feature=private_crt) |
| # Results are ID,keyword pairs |
| crtdll, kwds = extract_msvcr100() |
| root.add_file(crtdll, **kwds) |
| # Copy the manifest |
| # Actually, don't do that anymore - no DLL in DLLs should have a manifest |
| # dependency on msvcr90.dll anymore, so this should not be necessary |
| #manifest_dlls = manifest[0]+".root" |
| #open(manifest_dlls, "w").write(open(manifest[1]['src']).read().replace("msvcr","../msvcr")) |
| #DLLs.start_component("msvcr90_dlls", feature=private_crt) |
| #DLLs.add_file(manifest[0], src=os.path.abspath(manifest_dlls)) |
| |
| # Now start the main component for the DLLs directory; |
| # no regular files have been added to the directory yet. |
| DLLs.start_component() |
| |
| # Check if _ctypes.pyd exists |
| have_ctypes = os.path.exists(srcdir+"/%s/_ctypes.pyd" % PCBUILD) |
| if not have_ctypes: |
| print("WARNING: _ctypes.pyd not found, ctypes will not be included") |
| extensions.remove("_ctypes.pyd") |
| |
| # Add all .py files in Lib, except tkinter, test |
| dirs = [] |
| pydirs = [(root, "Lib", hgfiles["Lib"], default_feature)] |
| while pydirs: |
| # Commit every now and then, or else installer will complain |
| db.Commit() |
| parent, dir, files, feature = pydirs.pop() |
| if dir.startswith("plat-"): |
| continue |
| if dir in ["tkinter", "idlelib", "turtledemo"]: |
| if not have_tcl: |
| continue |
| feature = tcltk |
| tcltk.set_current() |
| elif dir in ('test', 'tests'): |
| feature = testsuite |
| elif not have_ctypes and dir == "ctypes": |
| continue |
| feature.set_current() |
| lib = PyDirectory(db, cab, parent, dir, dir, "%s|%s" % (parent.make_short(dir), dir)) |
| dirs.append(lib) |
| has_py = False |
| for name, subdir in files.items(): |
| if subdir is None: |
| assert os.path.isfile(os.path.join(lib.absolute, name)) |
| if name == 'README': |
| lib.add_file("README.txt", src="README") |
| else: |
| lib.add_file(name) |
| has_py = has_py or name.endswith(".py") or name.endswith(".pyw") |
| else: |
| assert os.path.isdir(os.path.join(lib.absolute, name)) |
| pydirs.append((lib, name, subdir, feature)) |
| |
| if has_py: |
| lib.remove_pyc() |
| # Add DLLs |
| default_feature.set_current() |
| lib = DLLs |
| lib.add_file("py.ico", src=srcdir+"/PC/py.ico") |
| lib.add_file("pyc.ico", src=srcdir+"/PC/pyc.ico") |
| dlls = [] |
| tclfiles = [] |
| for f in extensions: |
| if f=="_tkinter.pyd": |
| continue |
| if not os.path.exists(srcdir + "/" + PCBUILD + "/" + f): |
| print("WARNING: Missing extension", f) |
| continue |
| dlls.append(f) |
| lib.add_file(f) |
| lib.add_file('python3.dll') |
| # Add sqlite |
| if msilib.msi_type=="Intel64;1033": |
| sqlite_arch = "/ia64" |
| elif msilib.msi_type=="x64;1033": |
| sqlite_arch = "/amd64" |
| tclsuffix = "64" |
| else: |
| sqlite_arch = "" |
| tclsuffix = "" |
| lib.add_file("sqlite3.dll") |
| if have_tcl: |
| if not os.path.exists("%s/%s/_tkinter.pyd" % (srcdir, PCBUILD)): |
| print("WARNING: Missing _tkinter.pyd") |
| else: |
| lib.start_component("TkDLLs", tcltk) |
| lib.add_file("_tkinter.pyd") |
| dlls.append("_tkinter.pyd") |
| tcldir = os.path.normpath(srcdir+("/../tcltk%s/bin" % tclsuffix)) |
| for f in glob.glob1(tcldir, "*.dll"): |
| lib.add_file(f, src=os.path.join(tcldir, f)) |
| # check whether there are any unknown extensions |
| for f in glob.glob1(srcdir+"/"+PCBUILD, "*.pyd"): |
| if f.endswith("_d.pyd"): continue # debug version |
| if f in dlls: continue |
| print("WARNING: Unknown extension", f) |
| |
| # Add headers |
| default_feature.set_current() |
| lib = PyDirectory(db, cab, root, "include", "include", "INCLUDE|include") |
| lib.glob("*.h") |
| lib.add_file("pyconfig.h", src="../PC/pyconfig.h") |
| # Add import libraries |
| lib = PyDirectory(db, cab, root, PCBUILD, "libs", "LIBS|libs") |
| for f in dlls: |
| lib.add_file(f.replace('pyd','lib')) |
| lib.add_file('python%s%s.lib' % (major, minor)) |
| lib.add_file('python3.lib') |
| # Add the mingw-format library |
| if have_mingw: |
| lib.add_file('libpython%s%s.a' % (major, minor)) |
| if have_tcl: |
| # Add Tcl/Tk |
| tcldirs = [(root, '../tcltk%s/lib' % tclsuffix, 'tcl')] |
| tcltk.set_current() |
| while tcldirs: |
| parent, phys, dir = tcldirs.pop() |
| lib = PyDirectory(db, cab, parent, phys, dir, "%s|%s" % (parent.make_short(dir), dir)) |
| if not os.path.exists(lib.absolute): |
| continue |
| for f in os.listdir(lib.absolute): |
| if os.path.isdir(os.path.join(lib.absolute, f)): |
| tcldirs.append((lib, f, f)) |
| else: |
| lib.add_file(f) |
| # Add tools |
| tools.set_current() |
| tooldir = PyDirectory(db, cab, root, "Tools", "Tools", "TOOLS|Tools") |
| for f in ['i18n', 'pynche', 'Scripts']: |
| lib = PyDirectory(db, cab, tooldir, f, f, "%s|%s" % (tooldir.make_short(f), f)) |
| lib.glob("*.py") |
| lib.glob("*.pyw", exclude=['pydocgui.pyw']) |
| lib.remove_pyc() |
| lib.glob("*.txt") |
| if f == "pynche": |
| x = PyDirectory(db, cab, lib, "X", "X", "X|X") |
| x.glob("*.txt") |
| if os.path.exists(os.path.join(lib.absolute, "README")): |
| lib.add_file("README.txt", src="README") |
| if f == 'Scripts': |
| lib.add_file("2to3.py", src="2to3") |
| lib.add_file("pydoc3.py", src="pydoc3") |
| lib.add_file("pyvenv.py", src="pyvenv") |
| if have_tcl: |
| lib.start_component("pydocgui.pyw", tcltk, keyfile="pydocgui.pyw") |
| lib.add_file("pydocgui.pyw") |
| # Add documentation |
| htmlfiles.set_current() |
| lib = PyDirectory(db, cab, root, "Doc", "Doc", "DOC|Doc") |
| lib.start_component("documentation", keyfile=docfile) |
| lib.add_file(docfile, src="build/htmlhelp/"+docfile) |
| |
| cab.commit(db) |
| |
| for f in tmpfiles: |
| os.unlink(f) |
| |
| # See "Registry Table", "Component Table" |
| def add_registry(db): |
| # File extensions, associated with the REGISTRY.def component |
| # IDLE verbs depend on the tcltk feature. |
| # msidbComponentAttributesRegistryKeyPath = 4 |
| # -1 for Root specifies "dependent on ALLUSERS property" |
| tcldata = [] |
| if have_tcl: |
| tcldata = [ |
| ("REGISTRY.tcl", msilib.gen_uuid(), "TARGETDIR", registry_component, None, |
| "py.IDLE")] |
| add_data(db, "Component", |
| # msidbComponentAttributesRegistryKeyPath = 4 |
| [("REGISTRY", msilib.gen_uuid(), "TARGETDIR", registry_component, None, |
| "InstallPath"), |
| ("REGISTRY.doc", msilib.gen_uuid(), "TARGETDIR", registry_component, None, |
| "Documentation"), |
| ("REGISTRY.path", msilib.gen_uuid(), "TARGETDIR", registry_component, None, |
| None), |
| ("REGISTRY.def", msilib.gen_uuid(), "TARGETDIR", registry_component, |
| None, None)] + tcldata) |
| # See "FeatureComponents Table". |
| # The association between TclTk and pythonw.exe is necessary to make ICE59 |
| # happy, because the installer otherwise believes that the IDLE and PyDoc |
| # shortcuts might get installed without pythonw.exe being install. This |
| # is not true, since installing TclTk will install the default feature, which |
| # will cause pythonw.exe to be installed. |
| # REGISTRY.tcl is not associated with any feature, as it will be requested |
| # through a custom action |
| tcldata = [] |
| if have_tcl: |
| tcldata = [(tcltk.id, "pythonw.exe")] |
| add_data(db, "FeatureComponents", |
| [(default_feature.id, "REGISTRY"), |
| (htmlfiles.id, "REGISTRY.doc"), |
| (prepend_path.id, "REGISTRY.path"), |
| (ext_feature.id, "REGISTRY.def")] + |
| tcldata |
| ) |
| # Extensions are not advertised. For advertised extensions, |
| # we would need separate binaries that install along with the |
| # extension. |
| pat = r"Software\Classes\%sPython.%sFile\shell\%s\command" |
| ewi = "Edit with IDLE" |
| pat2 = r"Software\Classes\%sPython.%sFile\DefaultIcon" |
| pat3 = r"Software\Classes\%sPython.%sFile" |
| pat4 = r"Software\Classes\%sPython.%sFile\shellex\DropHandler" |
| tcl_verbs = [] |
| if have_tcl: |
| tcl_verbs=[ |
| ("py.IDLE", -1, pat % (testprefix, "", ewi), "", |
| r'"[TARGETDIR]pythonw.exe" "[TARGETDIR]Lib\idlelib\idle.pyw" -e "%1"', |
| "REGISTRY.tcl"), |
| ("pyw.IDLE", -1, pat % (testprefix, "NoCon", ewi), "", |
| r'"[TARGETDIR]pythonw.exe" "[TARGETDIR]Lib\idlelib\idle.pyw" -e "%1"', |
| "REGISTRY.tcl"), |
| ] |
| add_data(db, "Registry", |
| [# Extensions |
| ("py.ext", -1, r"Software\Classes\."+ext, "", |
| "Python.File", "REGISTRY.def"), |
| ("pyw.ext", -1, r"Software\Classes\."+ext+'w', "", |
| "Python.NoConFile", "REGISTRY.def"), |
| ("pyc.ext", -1, r"Software\Classes\."+ext+'c', "", |
| "Python.CompiledFile", "REGISTRY.def"), |
| ("pyo.ext", -1, r"Software\Classes\."+ext+'o', "", |
| "Python.CompiledFile", "REGISTRY.def"), |
| # MIME types |
| ("py.mime", -1, r"Software\Classes\."+ext, "Content Type", |
| "text/plain", "REGISTRY.def"), |
| ("pyw.mime", -1, r"Software\Classes\."+ext+'w', "Content Type", |
| "text/plain", "REGISTRY.def"), |
| #Verbs |
| ("py.open", -1, pat % (testprefix, "", "open"), "", |
| r'"[LAUNCHERDIR]py.exe" "%1" %*', "REGISTRY.def"), |
| ("pyw.open", -1, pat % (testprefix, "NoCon", "open"), "", |
| r'"[LAUNCHERDIR]pyw.exe" "%1" %*', "REGISTRY.def"), |
| ("pyc.open", -1, pat % (testprefix, "Compiled", "open"), "", |
| r'"[LAUNCHERDIR]py.exe" "%1" %*', "REGISTRY.def"), |
| ] + tcl_verbs + [ |
| #Icons |
| ("py.icon", -1, pat2 % (testprefix, ""), "", |
| r'[DLLs]py.ico', "REGISTRY.def"), |
| ("pyw.icon", -1, pat2 % (testprefix, "NoCon"), "", |
| r'[DLLs]py.ico', "REGISTRY.def"), |
| ("pyc.icon", -1, pat2 % (testprefix, "Compiled"), "", |
| r'[DLLs]pyc.ico', "REGISTRY.def"), |
| # Descriptions |
| ("py.txt", -1, pat3 % (testprefix, ""), "", |
| "Python File", "REGISTRY.def"), |
| ("pyw.txt", -1, pat3 % (testprefix, "NoCon"), "", |
| "Python File (no console)", "REGISTRY.def"), |
| ("pyc.txt", -1, pat3 % (testprefix, "Compiled"), "", |
| "Compiled Python File", "REGISTRY.def"), |
| # Drop Handler |
| ("py.drop", -1, pat4 % (testprefix, ""), "", |
| "{60254CA5-953B-11CF-8C96-00AA00B8708C}", "REGISTRY.def"), |
| ("pyw.drop", -1, pat4 % (testprefix, "NoCon"), "", |
| "{60254CA5-953B-11CF-8C96-00AA00B8708C}", "REGISTRY.def"), |
| ("pyc.drop", -1, pat4 % (testprefix, "Compiled"), "", |
| "{60254CA5-953B-11CF-8C96-00AA00B8708C}", "REGISTRY.def"), |
| ]) |
| |
| # PATHEXT |
| add_data(db, "Environment", |
| [("PathExtAddition", "=-*PathExt", "[~];.PY", "REGISTRY.def")]) |
| |
| # Registry keys |
| prefix = r"Software\%sPython\PythonCore\%s" % (testprefix, short_version) |
| add_data(db, "Registry", |
| [("InstallPath", -1, prefix+r"\InstallPath", "", "[TARGETDIR]", "REGISTRY"), |
| ("InstallGroup", -1, prefix+r"\InstallPath\InstallGroup", "", |
| "Python %s" % short_version, "REGISTRY"), |
| ("PythonPath", -1, prefix+r"\PythonPath", "", |
| r"[TARGETDIR]Lib;[TARGETDIR]DLLs", "REGISTRY"), |
| ("Documentation", -1, prefix+r"\Help\Main Python Documentation", "", |
| "[TARGETDIR]Doc\\"+docfile , "REGISTRY.doc"), |
| ("Modules", -1, prefix+r"\Modules", "+", None, "REGISTRY"), |
| ("AppPaths", -1, r"Software\Microsoft\Windows\CurrentVersion\App Paths\Python.exe", |
| "", r"[TARGETDIR]Python.exe", "REGISTRY.def"), |
| ("DisplayIcon", -1, |
| r"Software\Microsoft\Windows\CurrentVersion\Uninstall\%s" % product_code, |
| "DisplayIcon", "[TARGETDIR]python.exe", "REGISTRY") |
| ]) |
| # Shortcuts, see "Shortcut Table" |
| add_data(db, "Directory", |
| [("ProgramMenuFolder", "TARGETDIR", "."), |
| ("MenuDir", "ProgramMenuFolder", "PY%s%s|%sPython %s.%s" % (major,minor,testprefix,major,minor))]) |
| add_data(db, "RemoveFile", |
| [("MenuDir", "TARGETDIR", None, "MenuDir", 2)]) |
| tcltkshortcuts = [] |
| if have_tcl: |
| tcltkshortcuts = [ |
| ("IDLE", "MenuDir", "IDLE|IDLE (Python GUI)", "pythonw.exe", |
| tcltk.id, r'"[TARGETDIR]Lib\idlelib\idle.pyw"', None, None, "python_icon.exe", 0, None, "TARGETDIR"), |
| ("PyDoc", "MenuDir", "MODDOCS|Module Docs", "pythonw.exe", |
| tcltk.id, r'"[TARGETDIR]Tools\scripts\pydocgui.pyw"', None, None, "python_icon.exe", 0, None, "TARGETDIR"), |
| ] |
| add_data(db, "Shortcut", |
| tcltkshortcuts + |
| [# Advertised shortcuts: targets are features, not files |
| ("Python", "MenuDir", "PYTHON|Python (command line)", "python.exe", |
| default_feature.id, None, None, None, "python_icon.exe", 2, None, "TARGETDIR"), |
| # Advertising the Manual breaks on (some?) Win98, and the shortcut lacks an |
| # icon first. |
| #("Manual", "MenuDir", "MANUAL|Python Manuals", "documentation", |
| # htmlfiles.id, None, None, None, None, None, None, None), |
| ## Non-advertised shortcuts: must be associated with a registry component |
| ("Manual", "MenuDir", "MANUAL|Python Manuals", "REGISTRY.doc", |
| "[#%s]" % docfile, None, |
| None, None, None, None, None, None), |
| ("Uninstall", "MenuDir", "UNINST|Uninstall Python", "REGISTRY", |
| SystemFolderName+"msiexec", "/x%s" % product_code, |
| None, None, None, None, None, None), |
| ]) |
| db.Commit() |
| |
| def build_pdbzip(): |
| pdbexclude = ['kill_python.pdb', 'make_buildinfo.pdb', |
| 'make_versioninfo.pdb'] |
| path = "python-%s%s-pdb.zip" % (full_current_version, msilib.arch_ext) |
| pdbzip = zipfile.ZipFile(path, 'w') |
| for f in glob.glob1(os.path.join(srcdir, PCBUILD), "*.pdb"): |
| if f not in pdbexclude and not f.endswith('_d.pdb'): |
| pdbzip.write(os.path.join(srcdir, PCBUILD, f), f) |
| pdbzip.close() |
| |
| db,msiname = build_database() |
| try: |
| add_features(db) |
| add_ui(db) |
| add_files(db) |
| add_registry(db) |
| remove_old_versions(db) |
| db.Commit() |
| finally: |
| del db |
| |
| # Merge CRT into MSI file. This requires the database to be closed. |
| mod_dir = os.path.join(os.environ["ProgramFiles"], "Common Files", "Merge Modules") |
| if msilib.Win64: |
| modules = ["Microsoft_VC100_CRT_x64.msm"] |
| else: |
| modules = ["Microsoft_VC100_CRT_x86.msm"] |
| |
| for i, n in enumerate(modules): |
| modules[i] = os.path.join(mod_dir, n) |
| |
| def merge(msi, feature, rootdir, modules): |
| cab_and_filecount = [] |
| # Step 1: Merge databases, extract cabfiles |
| m = msilib.MakeMerge2() |
| m.OpenLog("merge.log") |
| m.OpenDatabase(msi) |
| for module in modules: |
| print module |
| m.OpenModule(module,0) |
| m.Merge(feature, rootdir) |
| print "Errors:" |
| for e in m.Errors: |
| print e.Type, e.ModuleTable, e.DatabaseTable |
| print " Modkeys:", |
| for s in e.ModuleKeys: print s, |
| print |
| print " DBKeys:", |
| for s in e.DatabaseKeys: print s, |
| print |
| cabname = tempfile.mktemp(suffix=".cab") |
| m.ExtractCAB(cabname) |
| cab_and_filecount.append((cabname, len(m.ModuleFiles))) |
| m.CloseModule() |
| m.CloseDatabase(True) |
| m.CloseLog() |
| |
| # Step 2: Add CAB files |
| i = msilib.MakeInstaller() |
| db = i.OpenDatabase(msi, constants.msiOpenDatabaseModeTransact) |
| |
| v = db.OpenView("SELECT LastSequence FROM Media") |
| v.Execute(None) |
| maxmedia = -1 |
| while 1: |
| r = v.Fetch() |
| if not r: break |
| seq = r.IntegerData(1) |
| if seq > maxmedia: |
| maxmedia = seq |
| print "Start of Media", maxmedia |
| |
| for cabname, count in cab_and_filecount: |
| stream = "merged%d" % maxmedia |
| msilib.add_data(db, "Media", |
| [(maxmedia+1, maxmedia+count, None, "#"+stream, None, None)]) |
| msilib.add_stream(db, stream, cabname) |
| os.unlink(cabname) |
| maxmedia += count |
| # The merge module sets ALLUSERS to 1 in the property table. |
| # This is undesired; delete that |
| v = db.OpenView("DELETE FROM Property WHERE Property='ALLUSERS'") |
| v.Execute(None) |
| v.Close() |
| db.Commit() |
| |
| merge(msiname, "SharedCRT", "TARGETDIR", modules) |
| |
| # certname (from config.py) should be (a substring of) |
| # the certificate subject, e.g. "Python Software Foundation" |
| if certname: |
| os.system('signtool sign /n "%s" /t http://timestamp.verisign.com/scripts/timestamp.dll %s' % (certname, msiname)) |
| |
| if pdbzip: |
| build_pdbzip() |