| """HTTP/1.1 client library |
| |
| <intro stuff goes here> |
| <other stuff, too> |
| |
| HTTPConnection goes through a number of "states", which define when a client |
| may legally make another request or fetch the response for a particular |
| request. This diagram details these state transitions: |
| |
| (null) |
| | |
| | HTTPConnection() |
| v |
| Idle |
| | |
| | putrequest() |
| v |
| Request-started |
| | |
| | ( putheader() )* endheaders() |
| v |
| Request-sent |
| |\_____________________________ |
| | | getresponse() raises |
| | response = getresponse() | ConnectionError |
| v v |
| Unread-response Idle |
| [Response-headers-read] |
| |\____________________ |
| | | |
| | response.read() | putrequest() |
| v v |
| Idle Req-started-unread-response |
| ______/| |
| / | |
| response.read() | | ( putheader() )* endheaders() |
| v v |
| Request-started Req-sent-unread-response |
| | |
| | response.read() |
| v |
| Request-sent |
| |
| This diagram presents the following rules: |
| -- a second request may not be started until {response-headers-read} |
| -- a response [object] cannot be retrieved until {request-sent} |
| -- there is no differentiation between an unread response body and a |
| partially read response body |
| |
| Note: this enforcement is applied by the HTTPConnection class. The |
| HTTPResponse class does not enforce this state machine, which |
| implies sophisticated clients may accelerate the request/response |
| pipeline. Caution should be taken, though: accelerating the states |
| beyond the above pattern may imply knowledge of the server's |
| connection-close behavior for certain requests. For example, it |
| is impossible to tell whether the server will close the connection |
| UNTIL the response headers have been read; this means that further |
| requests cannot be placed into the pipeline until it is known that |
| the server will NOT be closing the connection. |
| |
| Logical State __state __response |
| ------------- ------- ---------- |
| Idle _CS_IDLE None |
| Request-started _CS_REQ_STARTED None |
| Request-sent _CS_REQ_SENT None |
| Unread-response _CS_IDLE <response_class> |
| Req-started-unread-response _CS_REQ_STARTED <response_class> |
| Req-sent-unread-response _CS_REQ_SENT <response_class> |
| """ |
| |
| import email.parser |
| import email.message |
| import http |
| import io |
| import os |
| import re |
| import socket |
| import collections |
| from urllib.parse import urlsplit |
| |
| # HTTPMessage, parse_headers(), and the HTTP status code constants are |
| # intentionally omitted for simplicity |
| __all__ = ["HTTPResponse", "HTTPConnection", |
| "HTTPException", "NotConnected", "UnknownProtocol", |
| "UnknownTransferEncoding", "UnimplementedFileMode", |
| "IncompleteRead", "InvalidURL", "ImproperConnectionState", |
| "CannotSendRequest", "CannotSendHeader", "ResponseNotReady", |
| "BadStatusLine", "LineTooLong", "RemoteDisconnected", "error", |
| "responses"] |
| |
| HTTP_PORT = 80 |
| HTTPS_PORT = 443 |
| |
| _UNKNOWN = 'UNKNOWN' |
| |
| # connection states |
| _CS_IDLE = 'Idle' |
| _CS_REQ_STARTED = 'Request-started' |
| _CS_REQ_SENT = 'Request-sent' |
| |
| |
| # hack to maintain backwards compatibility |
| globals().update(http.HTTPStatus.__members__) |
| |
| # another hack to maintain backwards compatibility |
| # Mapping status codes to official W3C names |
| responses = {v: v.phrase for v in http.HTTPStatus.__members__.values()} |
| |
| # maximal amount of data to read at one time in _safe_read |
| MAXAMOUNT = 1048576 |
| |
| # maximal line length when calling readline(). |
| _MAXLINE = 65536 |
| _MAXHEADERS = 100 |
| |
| # Header name/value ABNF (http://tools.ietf.org/html/rfc7230#section-3.2) |
| # |
| # VCHAR = %x21-7E |
| # obs-text = %x80-FF |
| # header-field = field-name ":" OWS field-value OWS |
| # field-name = token |
| # field-value = *( field-content / obs-fold ) |
| # field-content = field-vchar [ 1*( SP / HTAB ) field-vchar ] |
| # field-vchar = VCHAR / obs-text |
| # |
| # obs-fold = CRLF 1*( SP / HTAB ) |
| # ; obsolete line folding |
| # ; see Section 3.2.4 |
| |
| # token = 1*tchar |
| # |
| # tchar = "!" / "#" / "$" / "%" / "&" / "'" / "*" |
| # / "+" / "-" / "." / "^" / "_" / "`" / "|" / "~" |
| # / DIGIT / ALPHA |
| # ; any VCHAR, except delimiters |
| # |
| # VCHAR defined in http://tools.ietf.org/html/rfc5234#appendix-B.1 |
| |
| # the patterns for both name and value are more leniant than RFC |
| # definitions to allow for backwards compatibility |
| _is_legal_header_name = re.compile(rb'[^:\s][^:\r\n]*').fullmatch |
| _is_illegal_header_value = re.compile(rb'\n(?![ \t])|\r(?![ \t\n])').search |
| |
| # We always set the Content-Length header for these methods because some |
| # servers will otherwise respond with a 411 |
| _METHODS_EXPECTING_BODY = {'PATCH', 'POST', 'PUT'} |
| |
| |
| def _encode(data, name='data'): |
| """Call data.encode("latin-1") but show a better error message.""" |
| try: |
| return data.encode("latin-1") |
| except UnicodeEncodeError as err: |
| raise UnicodeEncodeError( |
| err.encoding, |
| err.object, |
| err.start, |
| err.end, |
| "%s (%.20r) is not valid Latin-1. Use %s.encode('utf-8') " |
| "if you want to send it encoded in UTF-8." % |
| (name.title(), data[err.start:err.end], name)) from None |
| |
| |
| class HTTPMessage(email.message.Message): |
| # XXX The only usage of this method is in |
| # http.server.CGIHTTPRequestHandler. Maybe move the code there so |
| # that it doesn't need to be part of the public API. The API has |
| # never been defined so this could cause backwards compatibility |
| # issues. |
| |
| def getallmatchingheaders(self, name): |
| """Find all header lines matching a given header name. |
| |
| Look through the list of headers and find all lines matching a given |
| header name (and their continuation lines). A list of the lines is |
| returned, without interpretation. If the header does not occur, an |
| empty list is returned. If the header occurs multiple times, all |
| occurrences are returned. Case is not important in the header name. |
| |
| """ |
| name = name.lower() + ':' |
| n = len(name) |
| lst = [] |
| hit = 0 |
| for line in self.keys(): |
| if line[:n].lower() == name: |
| hit = 1 |
| elif not line[:1].isspace(): |
| hit = 0 |
| if hit: |
| lst.append(line) |
| return lst |
| |
| def parse_headers(fp, _class=HTTPMessage): |
| """Parses only RFC2822 headers from a file pointer. |
| |
| email Parser wants to see strings rather than bytes. |
| But a TextIOWrapper around self.rfile would buffer too many bytes |
| from the stream, bytes which we later need to read as bytes. |
| So we read the correct bytes here, as bytes, for email Parser |
| to parse. |
| |
| """ |
| headers = [] |
| while True: |
| line = fp.readline(_MAXLINE + 1) |
| if len(line) > _MAXLINE: |
| raise LineTooLong("header line") |
| headers.append(line) |
| if len(headers) > _MAXHEADERS: |
| raise HTTPException("got more than %d headers" % _MAXHEADERS) |
| if line in (b'\r\n', b'\n', b''): |
| break |
| hstring = b''.join(headers).decode('iso-8859-1') |
| return email.parser.Parser(_class=_class).parsestr(hstring) |
| |
| |
| class HTTPResponse(io.BufferedIOBase): |
| |
| # See RFC 2616 sec 19.6 and RFC 1945 sec 6 for details. |
| |
| # The bytes from the socket object are iso-8859-1 strings. |
| # See RFC 2616 sec 2.2 which notes an exception for MIME-encoded |
| # text following RFC 2047. The basic status line parsing only |
| # accepts iso-8859-1. |
| |
| def __init__(self, sock, debuglevel=0, method=None, url=None): |
| # If the response includes a content-length header, we need to |
| # make sure that the client doesn't read more than the |
| # specified number of bytes. If it does, it will block until |
| # the server times out and closes the connection. This will |
| # happen if a self.fp.read() is done (without a size) whether |
| # self.fp is buffered or not. So, no self.fp.read() by |
| # clients unless they know what they are doing. |
| self.fp = sock.makefile("rb") |
| self.debuglevel = debuglevel |
| self._method = method |
| |
| # The HTTPResponse object is returned via urllib. The clients |
| # of http and urllib expect different attributes for the |
| # headers. headers is used here and supports urllib. msg is |
| # provided as a backwards compatibility layer for http |
| # clients. |
| |
| self.headers = self.msg = None |
| |
| # from the Status-Line of the response |
| self.version = _UNKNOWN # HTTP-Version |
| self.status = _UNKNOWN # Status-Code |
| self.reason = _UNKNOWN # Reason-Phrase |
| |
| self.chunked = _UNKNOWN # is "chunked" being used? |
| self.chunk_left = _UNKNOWN # bytes left to read in current chunk |
| self.length = _UNKNOWN # number of bytes left in response |
| self.will_close = _UNKNOWN # conn will close at end of response |
| |
| def _read_status(self): |
| line = str(self.fp.readline(_MAXLINE + 1), "iso-8859-1") |
| if len(line) > _MAXLINE: |
| raise LineTooLong("status line") |
| if self.debuglevel > 0: |
| print("reply:", repr(line)) |
| if not line: |
| # Presumably, the server closed the connection before |
| # sending a valid response. |
| raise RemoteDisconnected("Remote end closed connection without" |
| " response") |
| try: |
| version, status, reason = line.split(None, 2) |
| except ValueError: |
| try: |
| version, status = line.split(None, 1) |
| reason = "" |
| except ValueError: |
| # empty version will cause next test to fail. |
| version = "" |
| if not version.startswith("HTTP/"): |
| self._close_conn() |
| raise BadStatusLine(line) |
| |
| # The status code is a three-digit number |
| try: |
| status = int(status) |
| if status < 100 or status > 999: |
| raise BadStatusLine(line) |
| except ValueError: |
| raise BadStatusLine(line) |
| return version, status, reason |
| |
| def begin(self): |
| if self.headers is not None: |
| # we've already started reading the response |
| return |
| |
| # read until we get a non-100 response |
| while True: |
| version, status, reason = self._read_status() |
| if status != CONTINUE: |
| break |
| # skip the header from the 100 response |
| while True: |
| skip = self.fp.readline(_MAXLINE + 1) |
| if len(skip) > _MAXLINE: |
| raise LineTooLong("header line") |
| skip = skip.strip() |
| if not skip: |
| break |
| if self.debuglevel > 0: |
| print("header:", skip) |
| |
| self.code = self.status = status |
| self.reason = reason.strip() |
| if version in ("HTTP/1.0", "HTTP/0.9"): |
| # Some servers might still return "0.9", treat it as 1.0 anyway |
| self.version = 10 |
| elif version.startswith("HTTP/1."): |
| self.version = 11 # use HTTP/1.1 code for HTTP/1.x where x>=1 |
| else: |
| raise UnknownProtocol(version) |
| |
| self.headers = self.msg = parse_headers(self.fp) |
| |
| if self.debuglevel > 0: |
| for hdr in self.headers: |
| print("header:", hdr, end=" ") |
| |
| # are we using the chunked-style of transfer encoding? |
| tr_enc = self.headers.get("transfer-encoding") |
| if tr_enc and tr_enc.lower() == "chunked": |
| self.chunked = True |
| self.chunk_left = None |
| else: |
| self.chunked = False |
| |
| # will the connection close at the end of the response? |
| self.will_close = self._check_close() |
| |
| # do we have a Content-Length? |
| # NOTE: RFC 2616, S4.4, #3 says we ignore this if tr_enc is "chunked" |
| self.length = None |
| length = self.headers.get("content-length") |
| |
| # are we using the chunked-style of transfer encoding? |
| tr_enc = self.headers.get("transfer-encoding") |
| if length and not self.chunked: |
| try: |
| self.length = int(length) |
| except ValueError: |
| self.length = None |
| else: |
| if self.length < 0: # ignore nonsensical negative lengths |
| self.length = None |
| else: |
| self.length = None |
| |
| # does the body have a fixed length? (of zero) |
| if (status == NO_CONTENT or status == NOT_MODIFIED or |
| 100 <= status < 200 or # 1xx codes |
| self._method == "HEAD"): |
| self.length = 0 |
| |
| # if the connection remains open, and we aren't using chunked, and |
| # a content-length was not provided, then assume that the connection |
| # WILL close. |
| if (not self.will_close and |
| not self.chunked and |
| self.length is None): |
| self.will_close = True |
| |
| def _check_close(self): |
| conn = self.headers.get("connection") |
| if self.version == 11: |
| # An HTTP/1.1 proxy is assumed to stay open unless |
| # explicitly closed. |
| conn = self.headers.get("connection") |
| if conn and "close" in conn.lower(): |
| return True |
| return False |
| |
| # Some HTTP/1.0 implementations have support for persistent |
| # connections, using rules different than HTTP/1.1. |
| |
| # For older HTTP, Keep-Alive indicates persistent connection. |
| if self.headers.get("keep-alive"): |
| return False |
| |
| # At least Akamai returns a "Connection: Keep-Alive" header, |
| # which was supposed to be sent by the client. |
| if conn and "keep-alive" in conn.lower(): |
| return False |
| |
| # Proxy-Connection is a netscape hack. |
| pconn = self.headers.get("proxy-connection") |
| if pconn and "keep-alive" in pconn.lower(): |
| return False |
| |
| # otherwise, assume it will close |
| return True |
| |
| def _close_conn(self): |
| fp = self.fp |
| self.fp = None |
| fp.close() |
| |
| def close(self): |
| try: |
| super().close() # set "closed" flag |
| finally: |
| if self.fp: |
| self._close_conn() |
| |
| # These implementations are for the benefit of io.BufferedReader. |
| |
| # XXX This class should probably be revised to act more like |
| # the "raw stream" that BufferedReader expects. |
| |
| def flush(self): |
| super().flush() |
| if self.fp: |
| self.fp.flush() |
| |
| def readable(self): |
| return True |
| |
| # End of "raw stream" methods |
| |
| def isclosed(self): |
| """True if the connection is closed.""" |
| # NOTE: it is possible that we will not ever call self.close(). This |
| # case occurs when will_close is TRUE, length is None, and we |
| # read up to the last byte, but NOT past it. |
| # |
| # IMPLIES: if will_close is FALSE, then self.close() will ALWAYS be |
| # called, meaning self.isclosed() is meaningful. |
| return self.fp is None |
| |
| def read(self, amt=None): |
| if self.fp is None: |
| return b"" |
| |
| if self._method == "HEAD": |
| self._close_conn() |
| return b"" |
| |
| if amt is not None: |
| # Amount is given, implement using readinto |
| b = bytearray(amt) |
| n = self.readinto(b) |
| return memoryview(b)[:n].tobytes() |
| else: |
| # Amount is not given (unbounded read) so we must check self.length |
| # and self.chunked |
| |
| if self.chunked: |
| return self._readall_chunked() |
| |
| if self.length is None: |
| s = self.fp.read() |
| else: |
| try: |
| s = self._safe_read(self.length) |
| except IncompleteRead: |
| self._close_conn() |
| raise |
| self.length = 0 |
| self._close_conn() # we read everything |
| return s |
| |
| def readinto(self, b): |
| if self.fp is None: |
| return 0 |
| |
| if self._method == "HEAD": |
| self._close_conn() |
| return 0 |
| |
| if self.chunked: |
| return self._readinto_chunked(b) |
| |
| if self.length is not None: |
| if len(b) > self.length: |
| # clip the read to the "end of response" |
| b = memoryview(b)[0:self.length] |
| |
| # we do not use _safe_read() here because this may be a .will_close |
| # connection, and the user is reading more bytes than will be provided |
| # (for example, reading in 1k chunks) |
| n = self.fp.readinto(b) |
| if not n and b: |
| # Ideally, we would raise IncompleteRead if the content-length |
| # wasn't satisfied, but it might break compatibility. |
| self._close_conn() |
| elif self.length is not None: |
| self.length -= n |
| if not self.length: |
| self._close_conn() |
| return n |
| |
| def _read_next_chunk_size(self): |
| # Read the next chunk size from the file |
| line = self.fp.readline(_MAXLINE + 1) |
| if len(line) > _MAXLINE: |
| raise LineTooLong("chunk size") |
| i = line.find(b";") |
| if i >= 0: |
| line = line[:i] # strip chunk-extensions |
| try: |
| return int(line, 16) |
| except ValueError: |
| # close the connection as protocol synchronisation is |
| # probably lost |
| self._close_conn() |
| raise |
| |
| def _read_and_discard_trailer(self): |
| # read and discard trailer up to the CRLF terminator |
| ### note: we shouldn't have any trailers! |
| while True: |
| line = self.fp.readline(_MAXLINE + 1) |
| if len(line) > _MAXLINE: |
| raise LineTooLong("trailer line") |
| if not line: |
| # a vanishingly small number of sites EOF without |
| # sending the trailer |
| break |
| if line in (b'\r\n', b'\n', b''): |
| break |
| |
| def _get_chunk_left(self): |
| # return self.chunk_left, reading a new chunk if necessary. |
| # chunk_left == 0: at the end of the current chunk, need to close it |
| # chunk_left == None: No current chunk, should read next. |
| # This function returns non-zero or None if the last chunk has |
| # been read. |
| chunk_left = self.chunk_left |
| if not chunk_left: # Can be 0 or None |
| if chunk_left is not None: |
| # We are at the end of chunk. dicard chunk end |
| self._safe_read(2) # toss the CRLF at the end of the chunk |
| try: |
| chunk_left = self._read_next_chunk_size() |
| except ValueError: |
| raise IncompleteRead(b'') |
| if chunk_left == 0: |
| # last chunk: 1*("0") [ chunk-extension ] CRLF |
| self._read_and_discard_trailer() |
| # we read everything; close the "file" |
| self._close_conn() |
| chunk_left = None |
| self.chunk_left = chunk_left |
| return chunk_left |
| |
| def _readall_chunked(self): |
| assert self.chunked != _UNKNOWN |
| value = [] |
| try: |
| while True: |
| chunk_left = self._get_chunk_left() |
| if chunk_left is None: |
| break |
| value.append(self._safe_read(chunk_left)) |
| self.chunk_left = 0 |
| return b''.join(value) |
| except IncompleteRead: |
| raise IncompleteRead(b''.join(value)) |
| |
| def _readinto_chunked(self, b): |
| assert self.chunked != _UNKNOWN |
| total_bytes = 0 |
| mvb = memoryview(b) |
| try: |
| while True: |
| chunk_left = self._get_chunk_left() |
| if chunk_left is None: |
| return total_bytes |
| |
| if len(mvb) <= chunk_left: |
| n = self._safe_readinto(mvb) |
| self.chunk_left = chunk_left - n |
| return total_bytes + n |
| |
| temp_mvb = mvb[:chunk_left] |
| n = self._safe_readinto(temp_mvb) |
| mvb = mvb[n:] |
| total_bytes += n |
| self.chunk_left = 0 |
| |
| except IncompleteRead: |
| raise IncompleteRead(bytes(b[0:total_bytes])) |
| |
| def _safe_read(self, amt): |
| """Read the number of bytes requested, compensating for partial reads. |
| |
| Normally, we have a blocking socket, but a read() can be interrupted |
| by a signal (resulting in a partial read). |
| |
| Note that we cannot distinguish between EOF and an interrupt when zero |
| bytes have been read. IncompleteRead() will be raised in this |
| situation. |
| |
| This function should be used when <amt> bytes "should" be present for |
| reading. If the bytes are truly not available (due to EOF), then the |
| IncompleteRead exception can be used to detect the problem. |
| """ |
| s = [] |
| while amt > 0: |
| chunk = self.fp.read(min(amt, MAXAMOUNT)) |
| if not chunk: |
| raise IncompleteRead(b''.join(s), amt) |
| s.append(chunk) |
| amt -= len(chunk) |
| return b"".join(s) |
| |
| def _safe_readinto(self, b): |
| """Same as _safe_read, but for reading into a buffer.""" |
| total_bytes = 0 |
| mvb = memoryview(b) |
| while total_bytes < len(b): |
| if MAXAMOUNT < len(mvb): |
| temp_mvb = mvb[0:MAXAMOUNT] |
| n = self.fp.readinto(temp_mvb) |
| else: |
| n = self.fp.readinto(mvb) |
| if not n: |
| raise IncompleteRead(bytes(mvb[0:total_bytes]), len(b)) |
| mvb = mvb[n:] |
| total_bytes += n |
| return total_bytes |
| |
| def read1(self, n=-1): |
| """Read with at most one underlying system call. If at least one |
| byte is buffered, return that instead. |
| """ |
| if self.fp is None or self._method == "HEAD": |
| return b"" |
| if self.chunked: |
| return self._read1_chunked(n) |
| if self.length is not None and (n < 0 or n > self.length): |
| n = self.length |
| try: |
| result = self.fp.read1(n) |
| except ValueError: |
| if n >= 0: |
| raise |
| # some implementations, like BufferedReader, don't support -1 |
| # Read an arbitrarily selected largeish chunk. |
| result = self.fp.read1(16*1024) |
| if not result and n: |
| self._close_conn() |
| elif self.length is not None: |
| self.length -= len(result) |
| return result |
| |
| def peek(self, n=-1): |
| # Having this enables IOBase.readline() to read more than one |
| # byte at a time |
| if self.fp is None or self._method == "HEAD": |
| return b"" |
| if self.chunked: |
| return self._peek_chunked(n) |
| return self.fp.peek(n) |
| |
| def readline(self, limit=-1): |
| if self.fp is None or self._method == "HEAD": |
| return b"" |
| if self.chunked: |
| # Fallback to IOBase readline which uses peek() and read() |
| return super().readline(limit) |
| if self.length is not None and (limit < 0 or limit > self.length): |
| limit = self.length |
| result = self.fp.readline(limit) |
| if not result and limit: |
| self._close_conn() |
| elif self.length is not None: |
| self.length -= len(result) |
| return result |
| |
| def _read1_chunked(self, n): |
| # Strictly speaking, _get_chunk_left() may cause more than one read, |
| # but that is ok, since that is to satisfy the chunked protocol. |
| chunk_left = self._get_chunk_left() |
| if chunk_left is None or n == 0: |
| return b'' |
| if not (0 <= n <= chunk_left): |
| n = chunk_left # if n is negative or larger than chunk_left |
| read = self.fp.read1(n) |
| self.chunk_left -= len(read) |
| if not read: |
| raise IncompleteRead(b"") |
| return read |
| |
| def _peek_chunked(self, n): |
| # Strictly speaking, _get_chunk_left() may cause more than one read, |
| # but that is ok, since that is to satisfy the chunked protocol. |
| try: |
| chunk_left = self._get_chunk_left() |
| except IncompleteRead: |
| return b'' # peek doesn't worry about protocol |
| if chunk_left is None: |
| return b'' # eof |
| # peek is allowed to return more than requested. Just request the |
| # entire chunk, and truncate what we get. |
| return self.fp.peek(chunk_left)[:chunk_left] |
| |
| def fileno(self): |
| return self.fp.fileno() |
| |
| def getheader(self, name, default=None): |
| if self.headers is None: |
| raise ResponseNotReady() |
| headers = self.headers.get_all(name) or default |
| if isinstance(headers, str) or not hasattr(headers, '__iter__'): |
| return headers |
| else: |
| return ', '.join(headers) |
| |
| def getheaders(self): |
| """Return list of (header, value) tuples.""" |
| if self.headers is None: |
| raise ResponseNotReady() |
| return list(self.headers.items()) |
| |
| # We override IOBase.__iter__ so that it doesn't check for closed-ness |
| |
| def __iter__(self): |
| return self |
| |
| # For compatibility with old-style urllib responses. |
| |
| def info(self): |
| return self.headers |
| |
| def geturl(self): |
| return self.url |
| |
| def getcode(self): |
| return self.status |
| |
| class HTTPConnection: |
| |
| _http_vsn = 11 |
| _http_vsn_str = 'HTTP/1.1' |
| |
| response_class = HTTPResponse |
| default_port = HTTP_PORT |
| auto_open = 1 |
| debuglevel = 0 |
| |
| def __init__(self, host, port=None, timeout=socket._GLOBAL_DEFAULT_TIMEOUT, |
| source_address=None): |
| self.timeout = timeout |
| self.source_address = source_address |
| self.sock = None |
| self._buffer = [] |
| self.__response = None |
| self.__state = _CS_IDLE |
| self._method = None |
| self._tunnel_host = None |
| self._tunnel_port = None |
| self._tunnel_headers = {} |
| |
| (self.host, self.port) = self._get_hostport(host, port) |
| |
| # This is stored as an instance variable to allow unit |
| # tests to replace it with a suitable mockup |
| self._create_connection = socket.create_connection |
| |
| def set_tunnel(self, host, port=None, headers=None): |
| """Set up host and port for HTTP CONNECT tunnelling. |
| |
| In a connection that uses HTTP CONNECT tunneling, the host passed to the |
| constructor is used as a proxy server that relays all communication to |
| the endpoint passed to `set_tunnel`. This done by sending an HTTP |
| CONNECT request to the proxy server when the connection is established. |
| |
| This method must be called before the HTML connection has been |
| established. |
| |
| The headers argument should be a mapping of extra HTTP headers to send |
| with the CONNECT request. |
| """ |
| |
| if self.sock: |
| raise RuntimeError("Can't set up tunnel for established connection") |
| |
| self._tunnel_host, self._tunnel_port = self._get_hostport(host, port) |
| if headers: |
| self._tunnel_headers = headers |
| else: |
| self._tunnel_headers.clear() |
| |
| def _get_hostport(self, host, port): |
| if port is None: |
| i = host.rfind(':') |
| j = host.rfind(']') # ipv6 addresses have [...] |
| if i > j: |
| try: |
| port = int(host[i+1:]) |
| except ValueError: |
| if host[i+1:] == "": # http://foo.com:/ == http://foo.com/ |
| port = self.default_port |
| else: |
| raise InvalidURL("nonnumeric port: '%s'" % host[i+1:]) |
| host = host[:i] |
| else: |
| port = self.default_port |
| if host and host[0] == '[' and host[-1] == ']': |
| host = host[1:-1] |
| |
| return (host, port) |
| |
| def set_debuglevel(self, level): |
| self.debuglevel = level |
| |
| def _tunnel(self): |
| connect_str = "CONNECT %s:%d HTTP/1.0\r\n" % (self._tunnel_host, |
| self._tunnel_port) |
| connect_bytes = connect_str.encode("ascii") |
| self.send(connect_bytes) |
| for header, value in self._tunnel_headers.items(): |
| header_str = "%s: %s\r\n" % (header, value) |
| header_bytes = header_str.encode("latin-1") |
| self.send(header_bytes) |
| self.send(b'\r\n') |
| |
| response = self.response_class(self.sock, method=self._method) |
| (version, code, message) = response._read_status() |
| |
| if code != http.HTTPStatus.OK: |
| self.close() |
| raise OSError("Tunnel connection failed: %d %s" % (code, |
| message.strip())) |
| while True: |
| line = response.fp.readline(_MAXLINE + 1) |
| if len(line) > _MAXLINE: |
| raise LineTooLong("header line") |
| if not line: |
| # for sites which EOF without sending a trailer |
| break |
| if line in (b'\r\n', b'\n', b''): |
| break |
| |
| if self.debuglevel > 0: |
| print('header:', line.decode()) |
| |
| def connect(self): |
| """Connect to the host and port specified in __init__.""" |
| self.sock = self._create_connection( |
| (self.host,self.port), self.timeout, self.source_address) |
| self.sock.setsockopt(socket.IPPROTO_TCP, socket.TCP_NODELAY, 1) |
| |
| if self._tunnel_host: |
| self._tunnel() |
| |
| def close(self): |
| """Close the connection to the HTTP server.""" |
| self.__state = _CS_IDLE |
| try: |
| sock = self.sock |
| if sock: |
| self.sock = None |
| sock.close() # close it manually... there may be other refs |
| finally: |
| response = self.__response |
| if response: |
| self.__response = None |
| response.close() |
| |
| def send(self, data): |
| """Send `data' to the server. |
| ``data`` can be a string object, a bytes object, an array object, a |
| file-like object that supports a .read() method, or an iterable object. |
| """ |
| |
| if self.sock is None: |
| if self.auto_open: |
| self.connect() |
| else: |
| raise NotConnected() |
| |
| if self.debuglevel > 0: |
| print("send:", repr(data)) |
| blocksize = 8192 |
| if hasattr(data, "read") : |
| if self.debuglevel > 0: |
| print("sendIng a read()able") |
| encode = False |
| try: |
| mode = data.mode |
| except AttributeError: |
| # io.BytesIO and other file-like objects don't have a `mode` |
| # attribute. |
| pass |
| else: |
| if "b" not in mode: |
| encode = True |
| if self.debuglevel > 0: |
| print("encoding file using iso-8859-1") |
| while 1: |
| datablock = data.read(blocksize) |
| if not datablock: |
| break |
| if encode: |
| datablock = datablock.encode("iso-8859-1") |
| self.sock.sendall(datablock) |
| return |
| try: |
| self.sock.sendall(data) |
| except TypeError: |
| if isinstance(data, collections.Iterable): |
| for d in data: |
| self.sock.sendall(d) |
| else: |
| raise TypeError("data should be a bytes-like object " |
| "or an iterable, got %r" % type(data)) |
| |
| def _output(self, s): |
| """Add a line of output to the current request buffer. |
| |
| Assumes that the line does *not* end with \\r\\n. |
| """ |
| self._buffer.append(s) |
| |
| def _send_output(self, message_body=None): |
| """Send the currently buffered request and clear the buffer. |
| |
| Appends an extra \\r\\n to the buffer. |
| A message_body may be specified, to be appended to the request. |
| """ |
| self._buffer.extend((b"", b"")) |
| msg = b"\r\n".join(self._buffer) |
| del self._buffer[:] |
| |
| self.send(msg) |
| if message_body is not None: |
| self.send(message_body) |
| |
| def putrequest(self, method, url, skip_host=0, skip_accept_encoding=0): |
| """Send a request to the server. |
| |
| `method' specifies an HTTP request method, e.g. 'GET'. |
| `url' specifies the object being requested, e.g. '/index.html'. |
| `skip_host' if True does not add automatically a 'Host:' header |
| `skip_accept_encoding' if True does not add automatically an |
| 'Accept-Encoding:' header |
| """ |
| |
| # if a prior response has been completed, then forget about it. |
| if self.__response and self.__response.isclosed(): |
| self.__response = None |
| |
| |
| # in certain cases, we cannot issue another request on this connection. |
| # this occurs when: |
| # 1) we are in the process of sending a request. (_CS_REQ_STARTED) |
| # 2) a response to a previous request has signalled that it is going |
| # to close the connection upon completion. |
| # 3) the headers for the previous response have not been read, thus |
| # we cannot determine whether point (2) is true. (_CS_REQ_SENT) |
| # |
| # if there is no prior response, then we can request at will. |
| # |
| # if point (2) is true, then we will have passed the socket to the |
| # response (effectively meaning, "there is no prior response"), and |
| # will open a new one when a new request is made. |
| # |
| # Note: if a prior response exists, then we *can* start a new request. |
| # We are not allowed to begin fetching the response to this new |
| # request, however, until that prior response is complete. |
| # |
| if self.__state == _CS_IDLE: |
| self.__state = _CS_REQ_STARTED |
| else: |
| raise CannotSendRequest(self.__state) |
| |
| # Save the method we use, we need it later in the response phase |
| self._method = method |
| if not url: |
| url = '/' |
| request = '%s %s %s' % (method, url, self._http_vsn_str) |
| |
| # Non-ASCII characters should have been eliminated earlier |
| self._output(request.encode('ascii')) |
| |
| if self._http_vsn == 11: |
| # Issue some standard headers for better HTTP/1.1 compliance |
| |
| if not skip_host: |
| # this header is issued *only* for HTTP/1.1 |
| # connections. more specifically, this means it is |
| # only issued when the client uses the new |
| # HTTPConnection() class. backwards-compat clients |
| # will be using HTTP/1.0 and those clients may be |
| # issuing this header themselves. we should NOT issue |
| # it twice; some web servers (such as Apache) barf |
| # when they see two Host: headers |
| |
| # If we need a non-standard port,include it in the |
| # header. If the request is going through a proxy, |
| # but the host of the actual URL, not the host of the |
| # proxy. |
| |
| netloc = '' |
| if url.startswith('http'): |
| nil, netloc, nil, nil, nil = urlsplit(url) |
| |
| if netloc: |
| try: |
| netloc_enc = netloc.encode("ascii") |
| except UnicodeEncodeError: |
| netloc_enc = netloc.encode("idna") |
| self.putheader('Host', netloc_enc) |
| else: |
| if self._tunnel_host: |
| host = self._tunnel_host |
| port = self._tunnel_port |
| else: |
| host = self.host |
| port = self.port |
| |
| try: |
| host_enc = host.encode("ascii") |
| except UnicodeEncodeError: |
| host_enc = host.encode("idna") |
| |
| # As per RFC 273, IPv6 address should be wrapped with [] |
| # when used as Host header |
| |
| if host.find(':') >= 0: |
| host_enc = b'[' + host_enc + b']' |
| |
| if port == self.default_port: |
| self.putheader('Host', host_enc) |
| else: |
| host_enc = host_enc.decode("ascii") |
| self.putheader('Host', "%s:%s" % (host_enc, port)) |
| |
| # note: we are assuming that clients will not attempt to set these |
| # headers since *this* library must deal with the |
| # consequences. this also means that when the supporting |
| # libraries are updated to recognize other forms, then this |
| # code should be changed (removed or updated). |
| |
| # we only want a Content-Encoding of "identity" since we don't |
| # support encodings such as x-gzip or x-deflate. |
| if not skip_accept_encoding: |
| self.putheader('Accept-Encoding', 'identity') |
| |
| # we can accept "chunked" Transfer-Encodings, but no others |
| # NOTE: no TE header implies *only* "chunked" |
| #self.putheader('TE', 'chunked') |
| |
| # if TE is supplied in the header, then it must appear in a |
| # Connection header. |
| #self.putheader('Connection', 'TE') |
| |
| else: |
| # For HTTP/1.0, the server will assume "not chunked" |
| pass |
| |
| def putheader(self, header, *values): |
| """Send a request header line to the server. |
| |
| For example: h.putheader('Accept', 'text/html') |
| """ |
| if self.__state != _CS_REQ_STARTED: |
| raise CannotSendHeader() |
| |
| if hasattr(header, 'encode'): |
| header = header.encode('ascii') |
| |
| if not _is_legal_header_name(header): |
| raise ValueError('Invalid header name %r' % (header,)) |
| |
| values = list(values) |
| for i, one_value in enumerate(values): |
| if hasattr(one_value, 'encode'): |
| values[i] = one_value.encode('latin-1') |
| elif isinstance(one_value, int): |
| values[i] = str(one_value).encode('ascii') |
| |
| if _is_illegal_header_value(values[i]): |
| raise ValueError('Invalid header value %r' % (values[i],)) |
| |
| value = b'\r\n\t'.join(values) |
| header = header + b': ' + value |
| self._output(header) |
| |
| def endheaders(self, message_body=None): |
| """Indicate that the last header line has been sent to the server. |
| |
| This method sends the request to the server. The optional message_body |
| argument can be used to pass a message body associated with the |
| request. The message body will be sent in the same packet as the |
| message headers if it is a string, otherwise it is sent as a separate |
| packet. |
| """ |
| if self.__state == _CS_REQ_STARTED: |
| self.__state = _CS_REQ_SENT |
| else: |
| raise CannotSendHeader() |
| self._send_output(message_body) |
| |
| def request(self, method, url, body=None, headers={}): |
| """Send a complete request to the server.""" |
| self._send_request(method, url, body, headers) |
| |
| def _set_content_length(self, body, method): |
| # Set the content-length based on the body. If the body is "empty", we |
| # set Content-Length: 0 for methods that expect a body (RFC 7230, |
| # Section 3.3.2). If the body is set for other methods, we set the |
| # header provided we can figure out what the length is. |
| thelen = None |
| method_expects_body = method.upper() in _METHODS_EXPECTING_BODY |
| if body is None and method_expects_body: |
| thelen = '0' |
| elif body is not None: |
| try: |
| thelen = str(len(body)) |
| except TypeError: |
| # If this is a file-like object, try to |
| # fstat its file descriptor |
| try: |
| thelen = str(os.fstat(body.fileno()).st_size) |
| except (AttributeError, OSError): |
| # Don't send a length if this failed |
| if self.debuglevel > 0: print("Cannot stat!!") |
| |
| if thelen is not None: |
| self.putheader('Content-Length', thelen) |
| |
| def _send_request(self, method, url, body, headers): |
| # Honor explicitly requested Host: and Accept-Encoding: headers. |
| header_names = dict.fromkeys([k.lower() for k in headers]) |
| skips = {} |
| if 'host' in header_names: |
| skips['skip_host'] = 1 |
| if 'accept-encoding' in header_names: |
| skips['skip_accept_encoding'] = 1 |
| |
| self.putrequest(method, url, **skips) |
| |
| if 'content-length' not in header_names: |
| self._set_content_length(body, method) |
| for hdr, value in headers.items(): |
| self.putheader(hdr, value) |
| if isinstance(body, str): |
| # RFC 2616 Section 3.7.1 says that text default has a |
| # default charset of iso-8859-1. |
| body = _encode(body, 'body') |
| self.endheaders(body) |
| |
| def getresponse(self): |
| """Get the response from the server. |
| |
| If the HTTPConnection is in the correct state, returns an |
| instance of HTTPResponse or of whatever object is returned by |
| class the response_class variable. |
| |
| If a request has not been sent or if a previous response has |
| not be handled, ResponseNotReady is raised. If the HTTP |
| response indicates that the connection should be closed, then |
| it will be closed before the response is returned. When the |
| connection is closed, the underlying socket is closed. |
| """ |
| |
| # if a prior response has been completed, then forget about it. |
| if self.__response and self.__response.isclosed(): |
| self.__response = None |
| |
| # if a prior response exists, then it must be completed (otherwise, we |
| # cannot read this response's header to determine the connection-close |
| # behavior) |
| # |
| # note: if a prior response existed, but was connection-close, then the |
| # socket and response were made independent of this HTTPConnection |
| # object since a new request requires that we open a whole new |
| # connection |
| # |
| # this means the prior response had one of two states: |
| # 1) will_close: this connection was reset and the prior socket and |
| # response operate independently |
| # 2) persistent: the response was retained and we await its |
| # isclosed() status to become true. |
| # |
| if self.__state != _CS_REQ_SENT or self.__response: |
| raise ResponseNotReady(self.__state) |
| |
| if self.debuglevel > 0: |
| response = self.response_class(self.sock, self.debuglevel, |
| method=self._method) |
| else: |
| response = self.response_class(self.sock, method=self._method) |
| |
| try: |
| try: |
| response.begin() |
| except ConnectionError: |
| self.close() |
| raise |
| assert response.will_close != _UNKNOWN |
| self.__state = _CS_IDLE |
| |
| if response.will_close: |
| # this effectively passes the connection to the response |
| self.close() |
| else: |
| # remember this, so we can tell when it is complete |
| self.__response = response |
| |
| return response |
| except: |
| response.close() |
| raise |
| |
| try: |
| import ssl |
| except ImportError: |
| pass |
| else: |
| class HTTPSConnection(HTTPConnection): |
| "This class allows communication via SSL." |
| |
| default_port = HTTPS_PORT |
| |
| # XXX Should key_file and cert_file be deprecated in favour of context? |
| |
| def __init__(self, host, port=None, key_file=None, cert_file=None, |
| timeout=socket._GLOBAL_DEFAULT_TIMEOUT, |
| source_address=None, *, context=None, |
| check_hostname=None): |
| super(HTTPSConnection, self).__init__(host, port, timeout, |
| source_address) |
| self.key_file = key_file |
| self.cert_file = cert_file |
| if context is None: |
| context = ssl._create_default_https_context() |
| will_verify = context.verify_mode != ssl.CERT_NONE |
| if check_hostname is None: |
| check_hostname = context.check_hostname |
| if check_hostname and not will_verify: |
| raise ValueError("check_hostname needs a SSL context with " |
| "either CERT_OPTIONAL or CERT_REQUIRED") |
| if key_file or cert_file: |
| context.load_cert_chain(cert_file, key_file) |
| self._context = context |
| self._check_hostname = check_hostname |
| |
| def connect(self): |
| "Connect to a host on a given (SSL) port." |
| |
| super().connect() |
| |
| if self._tunnel_host: |
| server_hostname = self._tunnel_host |
| else: |
| server_hostname = self.host |
| |
| self.sock = self._context.wrap_socket(self.sock, |
| server_hostname=server_hostname) |
| if not self._context.check_hostname and self._check_hostname: |
| try: |
| ssl.match_hostname(self.sock.getpeercert(), server_hostname) |
| except Exception: |
| self.sock.shutdown(socket.SHUT_RDWR) |
| self.sock.close() |
| raise |
| |
| __all__.append("HTTPSConnection") |
| |
| class HTTPException(Exception): |
| # Subclasses that define an __init__ must call Exception.__init__ |
| # or define self.args. Otherwise, str() will fail. |
| pass |
| |
| class NotConnected(HTTPException): |
| pass |
| |
| class InvalidURL(HTTPException): |
| pass |
| |
| class UnknownProtocol(HTTPException): |
| def __init__(self, version): |
| self.args = version, |
| self.version = version |
| |
| class UnknownTransferEncoding(HTTPException): |
| pass |
| |
| class UnimplementedFileMode(HTTPException): |
| pass |
| |
| class IncompleteRead(HTTPException): |
| def __init__(self, partial, expected=None): |
| self.args = partial, |
| self.partial = partial |
| self.expected = expected |
| def __repr__(self): |
| if self.expected is not None: |
| e = ', %i more expected' % self.expected |
| else: |
| e = '' |
| return '%s(%i bytes read%s)' % (self.__class__.__name__, |
| len(self.partial), e) |
| def __str__(self): |
| return repr(self) |
| |
| class ImproperConnectionState(HTTPException): |
| pass |
| |
| class CannotSendRequest(ImproperConnectionState): |
| pass |
| |
| class CannotSendHeader(ImproperConnectionState): |
| pass |
| |
| class ResponseNotReady(ImproperConnectionState): |
| pass |
| |
| class BadStatusLine(HTTPException): |
| def __init__(self, line): |
| if not line: |
| line = repr(line) |
| self.args = line, |
| self.line = line |
| |
| class LineTooLong(HTTPException): |
| def __init__(self, line_type): |
| HTTPException.__init__(self, "got more than %d bytes when reading %s" |
| % (_MAXLINE, line_type)) |
| |
| class RemoteDisconnected(ConnectionResetError, BadStatusLine): |
| def __init__(self, *pos, **kw): |
| BadStatusLine.__init__(self, "") |
| ConnectionResetError.__init__(self, *pos, **kw) |
| |
| # for backwards compatibility |
| error = HTTPException |