| /* |
| An implementation of Buffered I/O as defined by PEP 3116 - "New I/O" |
| |
| Classes defined here: BufferedIOBase, BufferedReader, BufferedWriter, |
| BufferedRandom. |
| |
| Written by Amaury Forgeot d'Arc and Antoine Pitrou |
| */ |
| |
| #define PY_SSIZE_T_CLEAN |
| #include "Python.h" |
| #include "structmember.h" |
| #include "pythread.h" |
| #include "_iomodule.h" |
| |
| /* |
| * BufferedIOBase class, inherits from IOBase. |
| */ |
| PyDoc_STRVAR(BufferedIOBase_doc, |
| "Base class for buffered IO objects.\n" |
| "\n" |
| "The main difference with RawIOBase is that the read() method\n" |
| "supports omitting the size argument, and does not have a default\n" |
| "implementation that defers to readinto().\n" |
| "\n" |
| "In addition, read(), readinto() and write() may raise\n" |
| "BlockingIOError if the underlying raw stream is in non-blocking\n" |
| "mode and not ready; unlike their raw counterparts, they will never\n" |
| "return None.\n" |
| "\n" |
| "A typical implementation should not inherit from a RawIOBase\n" |
| "implementation, but wrap one.\n" |
| ); |
| |
| static PyObject * |
| BufferedIOBase_readinto(PyObject *self, PyObject *args) |
| { |
| Py_buffer buf; |
| Py_ssize_t len; |
| PyObject *data; |
| |
| if (!PyArg_ParseTuple(args, "w*:readinto", &buf)) { |
| return NULL; |
| } |
| |
| data = PyObject_CallMethod(self, "read", "n", buf.len); |
| if (data == NULL) |
| goto error; |
| |
| if (!PyBytes_Check(data)) { |
| Py_DECREF(data); |
| PyErr_SetString(PyExc_TypeError, "read() should return bytes"); |
| goto error; |
| } |
| |
| len = Py_SIZE(data); |
| memcpy(buf.buf, PyBytes_AS_STRING(data), len); |
| |
| PyBuffer_Release(&buf); |
| Py_DECREF(data); |
| |
| return PyLong_FromSsize_t(len); |
| |
| error: |
| PyBuffer_Release(&buf); |
| return NULL; |
| } |
| |
| static PyObject * |
| BufferedIOBase_unsupported(const char *message) |
| { |
| PyErr_SetString(IO_STATE->unsupported_operation, message); |
| return NULL; |
| } |
| |
| PyDoc_STRVAR(BufferedIOBase_read_doc, |
| "Read and return up to n bytes.\n" |
| "\n" |
| "If the argument is omitted, None, or negative, reads and\n" |
| "returns all data until EOF.\n" |
| "\n" |
| "If the argument is positive, and the underlying raw stream is\n" |
| "not 'interactive', multiple raw reads may be issued to satisfy\n" |
| "the byte count (unless EOF is reached first). But for\n" |
| "interactive raw streams (as well as sockets and pipes), at most\n" |
| "one raw read will be issued, and a short result does not imply\n" |
| "that EOF is imminent.\n" |
| "\n" |
| "Returns an empty bytes object on EOF.\n" |
| "\n" |
| "Returns None if the underlying raw stream was open in non-blocking\n" |
| "mode and no data is available at the moment.\n"); |
| |
| static PyObject * |
| BufferedIOBase_read(PyObject *self, PyObject *args) |
| { |
| return BufferedIOBase_unsupported("read"); |
| } |
| |
| PyDoc_STRVAR(BufferedIOBase_read1_doc, |
| "Read and return up to n bytes, with at most one read() call\n" |
| "to the underlying raw stream. A short result does not imply\n" |
| "that EOF is imminent.\n" |
| "\n" |
| "Returns an empty bytes object on EOF.\n"); |
| |
| static PyObject * |
| BufferedIOBase_read1(PyObject *self, PyObject *args) |
| { |
| return BufferedIOBase_unsupported("read1"); |
| } |
| |
| PyDoc_STRVAR(BufferedIOBase_write_doc, |
| "Write the given buffer to the IO stream.\n" |
| "\n" |
| "Returns the number of bytes written, which is never less than\n" |
| "len(b).\n" |
| "\n" |
| "Raises BlockingIOError if the buffer is full and the\n" |
| "underlying raw stream cannot accept more data at the moment.\n"); |
| |
| static PyObject * |
| BufferedIOBase_write(PyObject *self, PyObject *args) |
| { |
| return BufferedIOBase_unsupported("write"); |
| } |
| |
| |
| static PyMethodDef BufferedIOBase_methods[] = { |
| {"read", BufferedIOBase_read, METH_VARARGS, BufferedIOBase_read_doc}, |
| {"read1", BufferedIOBase_read1, METH_VARARGS, BufferedIOBase_read1_doc}, |
| {"readinto", BufferedIOBase_readinto, METH_VARARGS, NULL}, |
| {"write", BufferedIOBase_write, METH_VARARGS, BufferedIOBase_write_doc}, |
| {NULL, NULL} |
| }; |
| |
| PyTypeObject PyBufferedIOBase_Type = { |
| PyVarObject_HEAD_INIT(NULL, 0) |
| "_io._BufferedIOBase", /*tp_name*/ |
| 0, /*tp_basicsize*/ |
| 0, /*tp_itemsize*/ |
| 0, /*tp_dealloc*/ |
| 0, /*tp_print*/ |
| 0, /*tp_getattr*/ |
| 0, /*tp_setattr*/ |
| 0, /*tp_compare */ |
| 0, /*tp_repr*/ |
| 0, /*tp_as_number*/ |
| 0, /*tp_as_sequence*/ |
| 0, /*tp_as_mapping*/ |
| 0, /*tp_hash */ |
| 0, /*tp_call*/ |
| 0, /*tp_str*/ |
| 0, /*tp_getattro*/ |
| 0, /*tp_setattro*/ |
| 0, /*tp_as_buffer*/ |
| Py_TPFLAGS_DEFAULT | Py_TPFLAGS_BASETYPE, /*tp_flags*/ |
| BufferedIOBase_doc, /* tp_doc */ |
| 0, /* tp_traverse */ |
| 0, /* tp_clear */ |
| 0, /* tp_richcompare */ |
| 0, /* tp_weaklistoffset */ |
| 0, /* tp_iter */ |
| 0, /* tp_iternext */ |
| BufferedIOBase_methods, /* tp_methods */ |
| 0, /* tp_members */ |
| 0, /* tp_getset */ |
| &PyIOBase_Type, /* tp_base */ |
| 0, /* tp_dict */ |
| 0, /* tp_descr_get */ |
| 0, /* tp_descr_set */ |
| 0, /* tp_dictoffset */ |
| 0, /* tp_init */ |
| 0, /* tp_alloc */ |
| 0, /* tp_new */ |
| }; |
| |
| |
| typedef struct { |
| PyObject_HEAD |
| |
| PyObject *raw; |
| int ok; /* Initialized? */ |
| int readable; |
| int writable; |
| |
| /* Absolute position inside the raw stream (-1 if unknown). */ |
| Py_off_t abs_pos; |
| |
| /* A static buffer of size `buffer_size` */ |
| char *buffer; |
| /* Current logical position in the buffer. */ |
| Py_off_t pos; |
| /* Position of the raw stream in the buffer. */ |
| Py_off_t raw_pos; |
| |
| /* Just after the last buffered byte in the buffer, or -1 if the buffer |
| isn't ready for reading. */ |
| Py_off_t read_end; |
| |
| /* Just after the last byte actually written */ |
| Py_off_t write_pos; |
| /* Just after the last byte waiting to be written, or -1 if the buffer |
| isn't ready for writing. */ |
| Py_off_t write_end; |
| |
| PyThread_type_lock lock; |
| |
| Py_ssize_t buffer_size; |
| Py_ssize_t buffer_mask; |
| |
| PyObject *dict; |
| PyObject *weakreflist; |
| } BufferedObject; |
| |
| /* |
| Implementation notes: |
| |
| * BufferedReader, BufferedWriter and BufferedRandom try to share most |
| methods (this is helped by the members `readable` and `writable`, which |
| are initialized in the respective constructors) |
| * They also share a single buffer for reading and writing. This enables |
| interleaved reads and writes without flushing. It also makes the logic |
| a bit trickier to get right. |
| * The absolute position of the raw stream is cached, if possible, in the |
| `abs_pos` member. It must be updated every time an operation is done |
| on the raw stream. If not sure, it can be reinitialized by calling |
| _Buffered_raw_tell(), which queries the raw stream (_Buffered_raw_seek() |
| also does it). To read it, use RAW_TELL(). |
| * Three helpers, _BufferedReader_raw_read, _BufferedWriter_raw_write and |
| _BufferedWriter_flush_unlocked do a lot of useful housekeeping. |
| |
| NOTE: we should try to maintain block alignment of reads and writes to the |
| raw stream (according to the buffer size), but for now it is only done |
| in read() and friends. |
| |
| XXX: method naming is a bit messy. |
| */ |
| |
| /* These macros protect the BufferedObject against concurrent operations. */ |
| |
| #define ENTER_BUFFERED(self) \ |
| Py_BEGIN_ALLOW_THREADS \ |
| PyThread_acquire_lock(self->lock, 1); \ |
| Py_END_ALLOW_THREADS |
| |
| #define LEAVE_BUFFERED(self) \ |
| PyThread_release_lock(self->lock); |
| |
| #define CHECK_INITIALIZED(self) \ |
| if (self->ok <= 0) { \ |
| PyErr_SetString(PyExc_ValueError, \ |
| "I/O operation on uninitialized object"); \ |
| return NULL; \ |
| } |
| |
| #define CHECK_INITIALIZED_INT(self) \ |
| if (self->ok <= 0) { \ |
| PyErr_SetString(PyExc_ValueError, \ |
| "I/O operation on uninitialized object"); \ |
| return -1; \ |
| } |
| |
| #define VALID_READ_BUFFER(self) \ |
| (self->readable && self->read_end != -1) |
| |
| #define VALID_WRITE_BUFFER(self) \ |
| (self->writable && self->write_end != -1) |
| |
| #define ADJUST_POSITION(self, _new_pos) \ |
| do { \ |
| self->pos = _new_pos; \ |
| if (VALID_READ_BUFFER(self) && self->read_end < self->pos) \ |
| self->read_end = self->pos; \ |
| } while(0) |
| |
| #define READAHEAD(self) \ |
| ((self->readable && VALID_READ_BUFFER(self)) \ |
| ? (self->read_end - self->pos) : 0) |
| |
| #define RAW_OFFSET(self) \ |
| (((VALID_READ_BUFFER(self) || VALID_WRITE_BUFFER(self)) \ |
| && self->raw_pos >= 0) ? self->raw_pos - self->pos : 0) |
| |
| #define RAW_TELL(self) \ |
| (self->abs_pos != -1 ? self->abs_pos : _Buffered_raw_tell(self)) |
| |
| #define MINUS_LAST_BLOCK(self, size) \ |
| (self->buffer_mask ? \ |
| (size & ~self->buffer_mask) : \ |
| (self->buffer_size * (size / self->buffer_size))) |
| |
| |
| static void |
| BufferedObject_dealloc(BufferedObject *self) |
| { |
| if (self->ok && _PyIOBase_finalize((PyObject *) self) < 0) |
| return; |
| _PyObject_GC_UNTRACK(self); |
| self->ok = 0; |
| if (self->weakreflist != NULL) |
| PyObject_ClearWeakRefs((PyObject *)self); |
| Py_CLEAR(self->raw); |
| if (self->buffer) { |
| PyMem_Free(self->buffer); |
| self->buffer = NULL; |
| } |
| if (self->lock) { |
| PyThread_free_lock(self->lock); |
| self->lock = NULL; |
| } |
| Py_CLEAR(self->dict); |
| Py_TYPE(self)->tp_free((PyObject *)self); |
| } |
| |
| static int |
| Buffered_traverse(BufferedObject *self, visitproc visit, void *arg) |
| { |
| Py_VISIT(self->raw); |
| Py_VISIT(self->dict); |
| return 0; |
| } |
| |
| static int |
| Buffered_clear(BufferedObject *self) |
| { |
| if (self->ok && _PyIOBase_finalize((PyObject *) self) < 0) |
| return -1; |
| self->ok = 0; |
| Py_CLEAR(self->raw); |
| Py_CLEAR(self->dict); |
| return 0; |
| } |
| |
| /* |
| * _BufferedIOMixin methods |
| * This is not a class, just a collection of methods that will be reused |
| * by BufferedReader and BufferedWriter |
| */ |
| |
| /* Flush and close */ |
| |
| static PyObject * |
| BufferedIOMixin_flush(BufferedObject *self, PyObject *args) |
| { |
| CHECK_INITIALIZED(self) |
| return PyObject_CallMethodObjArgs(self->raw, _PyIO_str_flush, NULL); |
| } |
| |
| static int |
| BufferedIOMixin_closed(BufferedObject *self) |
| { |
| int closed; |
| PyObject *res; |
| CHECK_INITIALIZED_INT(self) |
| res = PyObject_GetAttr(self->raw, _PyIO_str_closed); |
| if (res == NULL) |
| return -1; |
| closed = PyObject_IsTrue(res); |
| Py_DECREF(res); |
| return closed; |
| } |
| |
| static PyObject * |
| BufferedIOMixin_closed_get(BufferedObject *self, void *context) |
| { |
| CHECK_INITIALIZED(self) |
| return PyObject_GetAttr(self->raw, _PyIO_str_closed); |
| } |
| |
| static PyObject * |
| BufferedIOMixin_close(BufferedObject *self, PyObject *args) |
| { |
| PyObject *res = NULL; |
| int r; |
| |
| CHECK_INITIALIZED(self) |
| ENTER_BUFFERED(self) |
| |
| r = BufferedIOMixin_closed(self); |
| if (r < 0) |
| goto end; |
| if (r > 0) { |
| res = Py_None; |
| Py_INCREF(res); |
| goto end; |
| } |
| /* flush() will most probably re-take the lock, so drop it first */ |
| LEAVE_BUFFERED(self) |
| res = PyObject_CallMethodObjArgs((PyObject *)self, _PyIO_str_flush, NULL); |
| ENTER_BUFFERED(self) |
| if (res == NULL) { |
| /* If flush() fails, just give up */ |
| if (PyErr_ExceptionMatches(PyExc_IOError)) |
| PyErr_Clear(); |
| else |
| goto end; |
| } |
| Py_XDECREF(res); |
| |
| res = PyObject_CallMethodObjArgs(self->raw, _PyIO_str_close, NULL); |
| |
| end: |
| LEAVE_BUFFERED(self) |
| return res; |
| } |
| |
| /* Inquiries */ |
| |
| static PyObject * |
| BufferedIOMixin_seekable(BufferedObject *self, PyObject *args) |
| { |
| CHECK_INITIALIZED(self) |
| return PyObject_CallMethodObjArgs(self->raw, _PyIO_str_seekable, NULL); |
| } |
| |
| static PyObject * |
| BufferedIOMixin_readable(BufferedObject *self, PyObject *args) |
| { |
| CHECK_INITIALIZED(self) |
| return PyObject_CallMethodObjArgs(self->raw, _PyIO_str_readable, NULL); |
| } |
| |
| static PyObject * |
| BufferedIOMixin_writable(BufferedObject *self, PyObject *args) |
| { |
| CHECK_INITIALIZED(self) |
| return PyObject_CallMethodObjArgs(self->raw, _PyIO_str_writable, NULL); |
| } |
| |
| static PyObject * |
| BufferedIOMixin_name_get(BufferedObject *self, void *context) |
| { |
| CHECK_INITIALIZED(self) |
| return PyObject_GetAttrString(self->raw, "name"); |
| } |
| |
| static PyObject * |
| BufferedIOMixin_mode_get(BufferedObject *self, void *context) |
| { |
| CHECK_INITIALIZED(self) |
| return PyObject_GetAttrString(self->raw, "mode"); |
| } |
| |
| /* Lower-level APIs */ |
| |
| static PyObject * |
| BufferedIOMixin_fileno(BufferedObject *self, PyObject *args) |
| { |
| CHECK_INITIALIZED(self) |
| return PyObject_CallMethodObjArgs(self->raw, _PyIO_str_fileno, NULL); |
| } |
| |
| static PyObject * |
| BufferedIOMixin_isatty(BufferedObject *self, PyObject *args) |
| { |
| CHECK_INITIALIZED(self) |
| return PyObject_CallMethodObjArgs(self->raw, _PyIO_str_isatty, NULL); |
| } |
| |
| |
| /* Forward decls */ |
| static PyObject * |
| _BufferedWriter_flush_unlocked(BufferedObject *, int); |
| static Py_ssize_t |
| _BufferedReader_fill_buffer(BufferedObject *self); |
| static void |
| _BufferedReader_reset_buf(BufferedObject *self); |
| static void |
| _BufferedWriter_reset_buf(BufferedObject *self); |
| static PyObject * |
| _BufferedReader_peek_unlocked(BufferedObject *self, Py_ssize_t); |
| static PyObject * |
| _BufferedReader_read_unlocked(BufferedObject *self, Py_ssize_t); |
| |
| |
| /* |
| * Helpers |
| */ |
| |
| /* Returns the address of the `written` member if a BlockingIOError was |
| raised, NULL otherwise. The error is always re-raised. */ |
| static Py_ssize_t * |
| _Buffered_check_blocking_error(void) |
| { |
| PyObject *t, *v, *tb; |
| PyBlockingIOErrorObject *err; |
| |
| PyErr_Fetch(&t, &v, &tb); |
| if (v == NULL || !PyErr_GivenExceptionMatches(v, PyExc_BlockingIOError)) { |
| PyErr_Restore(t, v, tb); |
| return NULL; |
| } |
| err = (PyBlockingIOErrorObject *) v; |
| /* TODO: sanity check (err->written >= 0) */ |
| PyErr_Restore(t, v, tb); |
| return &err->written; |
| } |
| |
| static Py_off_t |
| _Buffered_raw_tell(BufferedObject *self) |
| { |
| PyObject *res; |
| Py_off_t n; |
| res = PyObject_CallMethodObjArgs(self->raw, _PyIO_str_tell, NULL); |
| if (res == NULL) |
| return -1; |
| n = PyNumber_AsOff_t(res, PyExc_ValueError); |
| Py_DECREF(res); |
| if (n < 0) { |
| if (!PyErr_Occurred()) |
| PyErr_Format(PyExc_IOError, |
| "Raw stream returned invalid position %zd", n); |
| return -1; |
| } |
| self->abs_pos = n; |
| return n; |
| } |
| |
| static Py_off_t |
| _Buffered_raw_seek(BufferedObject *self, Py_off_t target, int whence) |
| { |
| PyObject *res, *posobj, *whenceobj; |
| Py_off_t n; |
| |
| posobj = PyLong_FromOff_t(target); |
| if (posobj == NULL) |
| return -1; |
| whenceobj = PyLong_FromLong(whence); |
| if (whenceobj == NULL) { |
| Py_DECREF(posobj); |
| return -1; |
| } |
| res = PyObject_CallMethodObjArgs(self->raw, _PyIO_str_seek, |
| posobj, whenceobj, NULL); |
| Py_DECREF(posobj); |
| Py_DECREF(whenceobj); |
| if (res == NULL) |
| return -1; |
| n = PyNumber_AsOff_t(res, PyExc_ValueError); |
| Py_DECREF(res); |
| if (n < 0) { |
| if (!PyErr_Occurred()) |
| PyErr_Format(PyExc_IOError, |
| "Raw stream returned invalid position %zd", n); |
| return -1; |
| } |
| self->abs_pos = n; |
| return n; |
| } |
| |
| static int |
| _Buffered_init(BufferedObject *self) |
| { |
| Py_ssize_t n; |
| if (self->buffer_size <= 0) { |
| PyErr_SetString(PyExc_ValueError, |
| "buffer size must be strictly positive"); |
| return -1; |
| } |
| if (self->buffer) |
| PyMem_Free(self->buffer); |
| self->buffer = PyMem_Malloc(self->buffer_size); |
| if (self->buffer == NULL) { |
| PyErr_NoMemory(); |
| return -1; |
| } |
| self->lock = PyThread_allocate_lock(); |
| if (self->lock == NULL) { |
| PyErr_SetString(PyExc_RuntimeError, "can't allocate read lock"); |
| return -1; |
| } |
| /* Find out whether buffer_size is a power of 2 */ |
| /* XXX is this optimization useful? */ |
| for (n = self->buffer_size - 1; n & 1; n >>= 1) |
| ; |
| if (n == 0) |
| self->buffer_mask = self->buffer_size - 1; |
| else |
| self->buffer_mask = 0; |
| if (_Buffered_raw_tell(self) == -1) |
| PyErr_Clear(); |
| return 0; |
| } |
| |
| /* |
| * Shared methods and wrappers |
| */ |
| |
| static PyObject * |
| Buffered_flush(BufferedObject *self, PyObject *args) |
| { |
| PyObject *res; |
| |
| CHECK_INITIALIZED(self) |
| if (BufferedIOMixin_closed(self)) { |
| PyErr_SetString(PyExc_ValueError, "flush of closed file"); |
| return NULL; |
| } |
| |
| ENTER_BUFFERED(self) |
| res = _BufferedWriter_flush_unlocked(self, 0); |
| if (res != NULL && self->readable) { |
| /* Rewind the raw stream so that its position corresponds to |
| the current logical position. */ |
| Py_off_t n; |
| n = _Buffered_raw_seek(self, -RAW_OFFSET(self), 1); |
| if (n == -1) |
| Py_CLEAR(res); |
| _BufferedReader_reset_buf(self); |
| } |
| LEAVE_BUFFERED(self) |
| |
| return res; |
| } |
| |
| static PyObject * |
| Buffered_peek(BufferedObject *self, PyObject *args) |
| { |
| Py_ssize_t n = 0; |
| PyObject *res = NULL; |
| |
| CHECK_INITIALIZED(self) |
| if (!PyArg_ParseTuple(args, "|n:peek", &n)) { |
| return NULL; |
| } |
| |
| ENTER_BUFFERED(self) |
| |
| if (self->writable) { |
| res = _BufferedWriter_flush_unlocked(self, 1); |
| if (res == NULL) |
| goto end; |
| Py_CLEAR(res); |
| } |
| res = _BufferedReader_peek_unlocked(self, n); |
| |
| end: |
| LEAVE_BUFFERED(self) |
| return res; |
| } |
| |
| static PyObject * |
| Buffered_read(BufferedObject *self, PyObject *args) |
| { |
| Py_ssize_t n = -1; |
| PyObject *res; |
| |
| CHECK_INITIALIZED(self) |
| if (!PyArg_ParseTuple(args, "|n:read", &n)) { |
| return NULL; |
| } |
| if (n < -1) { |
| PyErr_SetString(PyExc_ValueError, |
| "read length must be positive or -1"); |
| return NULL; |
| } |
| |
| if (BufferedIOMixin_closed(self)) { |
| PyErr_SetString(PyExc_ValueError, "read of closed file"); |
| return NULL; |
| } |
| |
| ENTER_BUFFERED(self) |
| res = _BufferedReader_read_unlocked(self, n); |
| LEAVE_BUFFERED(self) |
| |
| return res; |
| } |
| |
| static PyObject * |
| Buffered_read1(BufferedObject *self, PyObject *args) |
| { |
| Py_ssize_t n, have, r; |
| PyObject *res = NULL; |
| |
| CHECK_INITIALIZED(self) |
| if (!PyArg_ParseTuple(args, "n:read1", &n)) { |
| return NULL; |
| } |
| |
| if (n < 0) { |
| PyErr_SetString(PyExc_ValueError, |
| "read length must be positive"); |
| return NULL; |
| } |
| if (n == 0) |
| return PyBytes_FromStringAndSize(NULL, 0); |
| |
| ENTER_BUFFERED(self) |
| |
| if (self->writable) { |
| res = _BufferedWriter_flush_unlocked(self, 1); |
| if (res == NULL) |
| goto end; |
| Py_CLEAR(res); |
| } |
| |
| /* Return up to n bytes. If at least one byte is buffered, we |
| only return buffered bytes. Otherwise, we do one raw read. */ |
| |
| /* XXX: this mimicks the io.py implementation but is probably wrong. |
| If we need to read from the raw stream, then we could actually read |
| all `n` bytes asked by the caller (and possibly more, so as to fill |
| our buffer for the next reads). */ |
| |
| have = Py_SAFE_DOWNCAST(READAHEAD(self), Py_off_t, Py_ssize_t); |
| if (have > 0) { |
| if (n > have) |
| n = have; |
| res = PyBytes_FromStringAndSize(self->buffer + self->pos, n); |
| if (res == NULL) |
| goto end; |
| self->pos += n; |
| goto end; |
| } |
| |
| /* Fill the buffer from the raw stream, and copy it to the result. */ |
| _BufferedReader_reset_buf(self); |
| r = _BufferedReader_fill_buffer(self); |
| if (r == -1) |
| goto end; |
| if (r == -2) |
| r = 0; |
| if (n > r) |
| n = r; |
| res = PyBytes_FromStringAndSize(self->buffer, n); |
| if (res == NULL) |
| goto end; |
| self->pos = n; |
| |
| end: |
| LEAVE_BUFFERED(self) |
| return res; |
| } |
| |
| static PyObject * |
| Buffered_readinto(BufferedObject *self, PyObject *args) |
| { |
| PyObject *res = NULL; |
| |
| CHECK_INITIALIZED(self) |
| |
| /* TODO: use raw.readinto() instead! */ |
| if (self->writable) { |
| ENTER_BUFFERED(self) |
| res = _BufferedWriter_flush_unlocked(self, 0); |
| LEAVE_BUFFERED(self) |
| if (res == NULL) |
| goto end; |
| Py_DECREF(res); |
| } |
| res = BufferedIOBase_readinto((PyObject *)self, args); |
| |
| end: |
| return res; |
| } |
| |
| static PyObject * |
| _Buffered_readline(BufferedObject *self, Py_ssize_t limit) |
| { |
| PyObject *res = NULL; |
| PyObject *chunks = NULL; |
| Py_ssize_t n, written = 0; |
| const char *start, *s, *end; |
| |
| if (BufferedIOMixin_closed(self)) { |
| PyErr_SetString(PyExc_ValueError, "readline of closed file"); |
| return NULL; |
| } |
| |
| ENTER_BUFFERED(self) |
| |
| /* First, try to find a line in the buffer */ |
| n = Py_SAFE_DOWNCAST(READAHEAD(self), Py_off_t, Py_ssize_t); |
| if (limit >= 0 && n > limit) |
| n = limit; |
| start = self->buffer + self->pos; |
| end = start + n; |
| s = start; |
| while (s < end) { |
| if (*s++ == '\n') { |
| res = PyBytes_FromStringAndSize(start, s - start); |
| if (res != NULL) |
| self->pos += s - start; |
| goto end; |
| } |
| } |
| if (n == limit) { |
| res = PyBytes_FromStringAndSize(start, n); |
| if (res != NULL) |
| self->pos += n; |
| goto end; |
| } |
| |
| /* Now we try to get some more from the raw stream */ |
| if (self->writable) { |
| res = _BufferedWriter_flush_unlocked(self, 1); |
| if (res == NULL) |
| goto end; |
| Py_CLEAR(res); |
| } |
| chunks = PyList_New(0); |
| if (chunks == NULL) |
| goto end; |
| if (n > 0) { |
| res = PyBytes_FromStringAndSize(start, n); |
| if (res == NULL) |
| goto end; |
| if (PyList_Append(chunks, res) < 0) { |
| Py_CLEAR(res); |
| goto end; |
| } |
| Py_CLEAR(res); |
| written += n; |
| if (limit >= 0) |
| limit -= n; |
| } |
| |
| for (;;) { |
| _BufferedReader_reset_buf(self); |
| n = _BufferedReader_fill_buffer(self); |
| if (n == -1) |
| goto end; |
| if (n <= 0) |
| break; |
| if (limit >= 0 && n > limit) |
| n = limit; |
| start = self->buffer; |
| end = start + n; |
| s = start; |
| while (s < end) { |
| if (*s++ == '\n') { |
| res = PyBytes_FromStringAndSize(start, s - start); |
| if (res == NULL) |
| goto end; |
| self->pos = s - start; |
| goto found; |
| } |
| } |
| res = PyBytes_FromStringAndSize(start, n); |
| if (res == NULL) |
| goto end; |
| if (n == limit) { |
| self->pos = n; |
| break; |
| } |
| if (PyList_Append(chunks, res) < 0) { |
| Py_CLEAR(res); |
| goto end; |
| } |
| Py_CLEAR(res); |
| written += n; |
| if (limit >= 0) |
| limit -= n; |
| } |
| found: |
| if (res != NULL && PyList_Append(chunks, res) < 0) { |
| Py_CLEAR(res); |
| goto end; |
| } |
| Py_CLEAR(res); |
| res = _PyBytes_Join(_PyIO_empty_bytes, chunks); |
| |
| end: |
| LEAVE_BUFFERED(self) |
| Py_XDECREF(chunks); |
| return res; |
| } |
| |
| static PyObject * |
| Buffered_readline(BufferedObject *self, PyObject *args) |
| { |
| Py_ssize_t limit = -1; |
| |
| CHECK_INITIALIZED(self) |
| |
| if (!PyArg_ParseTuple(args, "|n:readline", &limit)) { |
| return NULL; |
| } |
| return _Buffered_readline(self, limit); |
| } |
| |
| |
| static PyObject * |
| Buffered_tell(BufferedObject *self, PyObject *args) |
| { |
| Py_off_t pos; |
| |
| CHECK_INITIALIZED(self) |
| pos = _Buffered_raw_tell(self); |
| if (pos == -1) |
| return NULL; |
| pos -= RAW_OFFSET(self); |
| /* TODO: sanity check (pos >= 0) */ |
| return PyLong_FromOff_t(pos); |
| } |
| |
| static PyObject * |
| Buffered_seek(BufferedObject *self, PyObject *args) |
| { |
| Py_off_t target, n; |
| int whence = 0; |
| PyObject *targetobj, *res = NULL; |
| |
| CHECK_INITIALIZED(self) |
| if (!PyArg_ParseTuple(args, "O|i:seek", &targetobj, &whence)) { |
| return NULL; |
| } |
| |
| if (whence < 0 || whence > 2) { |
| PyErr_Format(PyExc_ValueError, |
| "whence must be between 0 and 2, not %d", whence); |
| return NULL; |
| } |
| target = PyNumber_AsOff_t(targetobj, PyExc_ValueError); |
| if (target == -1 && PyErr_Occurred()) |
| return NULL; |
| |
| ENTER_BUFFERED(self) |
| |
| if (whence != 2 && self->readable) { |
| Py_off_t current, avail; |
| /* Check if seeking leaves us inside the current buffer, |
| so as to return quickly if possible. |
| Don't know how to do that when whence == 2, though. */ |
| current = RAW_TELL(self); |
| avail = READAHEAD(self); |
| if (avail > 0) { |
| Py_off_t offset; |
| if (whence == 0) |
| offset = target - (current - RAW_OFFSET(self)); |
| else |
| offset = target; |
| if (offset >= -self->pos && offset <= avail) { |
| self->pos += offset; |
| res = PyLong_FromOff_t(current - avail + offset); |
| goto end; |
| } |
| } |
| } |
| |
| /* Fallback: invoke raw seek() method and clear buffer */ |
| if (self->writable) { |
| res = _BufferedWriter_flush_unlocked(self, 0); |
| if (res == NULL) |
| goto end; |
| Py_CLEAR(res); |
| _BufferedWriter_reset_buf(self); |
| } |
| |
| /* TODO: align on block boundary and read buffer if needed? */ |
| if (whence == 1) |
| target -= RAW_OFFSET(self); |
| n = _Buffered_raw_seek(self, target, whence); |
| if (n == -1) |
| goto end; |
| self->raw_pos = -1; |
| res = PyLong_FromOff_t(n); |
| if (res != NULL && self->readable) |
| _BufferedReader_reset_buf(self); |
| |
| end: |
| LEAVE_BUFFERED(self) |
| return res; |
| } |
| |
| static PyObject * |
| Buffered_truncate(BufferedObject *self, PyObject *args) |
| { |
| PyObject *pos = Py_None; |
| PyObject *res = NULL; |
| |
| CHECK_INITIALIZED(self) |
| if (!PyArg_ParseTuple(args, "|O:truncate", &pos)) { |
| return NULL; |
| } |
| |
| ENTER_BUFFERED(self) |
| |
| if (self->writable) { |
| res = _BufferedWriter_flush_unlocked(self, 0); |
| if (res == NULL) |
| goto end; |
| Py_CLEAR(res); |
| } |
| if (self->readable) { |
| if (pos == Py_None) { |
| /* Rewind the raw stream so that its position corresponds to |
| the current logical position. */ |
| if (_Buffered_raw_seek(self, -RAW_OFFSET(self), 1) == -1) |
| goto end; |
| } |
| _BufferedReader_reset_buf(self); |
| } |
| res = PyObject_CallMethodObjArgs(self->raw, _PyIO_str_truncate, pos, NULL); |
| if (res == NULL) |
| goto end; |
| /* Reset cached position */ |
| if (_Buffered_raw_tell(self) == -1) |
| PyErr_Clear(); |
| |
| end: |
| LEAVE_BUFFERED(self) |
| return res; |
| } |
| |
| static PyObject * |
| Buffered_iternext(BufferedObject *self) |
| { |
| PyObject *line; |
| PyTypeObject *tp; |
| |
| CHECK_INITIALIZED(self); |
| |
| tp = Py_TYPE(self); |
| if (tp == &PyBufferedReader_Type || |
| tp == &PyBufferedRandom_Type) { |
| /* Skip method call overhead for speed */ |
| line = _Buffered_readline(self, -1); |
| } |
| else { |
| line = PyObject_CallMethodObjArgs((PyObject *)self, |
| _PyIO_str_readline, NULL); |
| if (line && !PyBytes_Check(line)) { |
| PyErr_Format(PyExc_IOError, |
| "readline() should have returned a bytes object, " |
| "not '%.200s'", Py_TYPE(line)->tp_name); |
| Py_DECREF(line); |
| return NULL; |
| } |
| } |
| |
| if (line == NULL) |
| return NULL; |
| |
| if (PyBytes_GET_SIZE(line) == 0) { |
| /* Reached EOF or would have blocked */ |
| Py_DECREF(line); |
| return NULL; |
| } |
| |
| return line; |
| } |
| |
| /* |
| * class BufferedReader |
| */ |
| |
| PyDoc_STRVAR(BufferedReader_doc, |
| "Create a new buffered reader using the given readable raw IO object."); |
| |
| static void _BufferedReader_reset_buf(BufferedObject *self) |
| { |
| self->read_end = -1; |
| } |
| |
| static int |
| BufferedReader_init(BufferedObject *self, PyObject *args, PyObject *kwds) |
| { |
| char *kwlist[] = {"raw", "buffer_size", NULL}; |
| Py_ssize_t buffer_size = DEFAULT_BUFFER_SIZE; |
| PyObject *raw; |
| |
| self->ok = 0; |
| |
| if (!PyArg_ParseTupleAndKeywords(args, kwds, "O|n:BufferedReader", kwlist, |
| &raw, &buffer_size)) { |
| return -1; |
| } |
| |
| if (_PyIOBase_checkReadable(raw, Py_True) == NULL) |
| return -1; |
| |
| Py_CLEAR(self->raw); |
| Py_INCREF(raw); |
| self->raw = raw; |
| self->buffer_size = buffer_size; |
| self->readable = 1; |
| self->writable = 0; |
| |
| if (_Buffered_init(self) < 0) |
| return -1; |
| _BufferedReader_reset_buf(self); |
| |
| self->ok = 1; |
| return 0; |
| } |
| |
| static Py_ssize_t |
| _BufferedReader_raw_read(BufferedObject *self, char *start, Py_ssize_t len) |
| { |
| Py_buffer buf; |
| PyObject *memobj, *res; |
| Py_ssize_t n; |
| /* NOTE: the buffer needn't be released as its object is NULL. */ |
| if (PyBuffer_FillInfo(&buf, NULL, start, len, 0, PyBUF_CONTIG) == -1) |
| return -1; |
| memobj = PyMemoryView_FromBuffer(&buf); |
| if (memobj == NULL) |
| return -1; |
| res = PyObject_CallMethodObjArgs(self->raw, _PyIO_str_readinto, memobj, NULL); |
| Py_DECREF(memobj); |
| if (res == NULL) |
| return -1; |
| if (res == Py_None) { |
| /* Non-blocking stream would have blocked. Special return code! */ |
| Py_DECREF(res); |
| return -2; |
| } |
| n = PyNumber_AsSsize_t(res, PyExc_ValueError); |
| Py_DECREF(res); |
| if (n < 0 || n > len) { |
| PyErr_Format(PyExc_IOError, |
| "raw readinto() returned invalid length %zd " |
| "(should have been between 0 and %zd)", n, len); |
| return -1; |
| } |
| if (n > 0 && self->abs_pos != -1) |
| self->abs_pos += n; |
| return n; |
| } |
| |
| static Py_ssize_t |
| _BufferedReader_fill_buffer(BufferedObject *self) |
| { |
| Py_ssize_t start, len, n; |
| if (VALID_READ_BUFFER(self)) |
| start = Py_SAFE_DOWNCAST(self->read_end, Py_off_t, Py_ssize_t); |
| else |
| start = 0; |
| len = self->buffer_size - start; |
| n = _BufferedReader_raw_read(self, self->buffer + start, len); |
| if (n <= 0) |
| return n; |
| self->read_end = start + n; |
| self->raw_pos = start + n; |
| return n; |
| } |
| |
| static PyObject * |
| _BufferedReader_read_unlocked(BufferedObject *self, Py_ssize_t n) |
| { |
| PyObject *data, *res = NULL; |
| Py_ssize_t current_size, remaining, written; |
| char *out; |
| |
| /* Special case for when the number of bytes to read is unspecified. */ |
| if (n == -1) { |
| PyObject *chunks = PyList_New(0); |
| if (chunks == NULL) |
| return NULL; |
| |
| /* First copy what we have in the current buffer. */ |
| current_size = Py_SAFE_DOWNCAST(READAHEAD(self), Py_off_t, Py_ssize_t); |
| data = NULL; |
| if (current_size) { |
| data = PyBytes_FromStringAndSize( |
| self->buffer + self->pos, current_size); |
| if (data == NULL) { |
| Py_DECREF(chunks); |
| return NULL; |
| } |
| } |
| _BufferedReader_reset_buf(self); |
| /* We're going past the buffer's bounds, flush it */ |
| if (self->writable) { |
| res = _BufferedWriter_flush_unlocked(self, 1); |
| if (res == NULL) { |
| Py_DECREF(chunks); |
| return NULL; |
| } |
| Py_CLEAR(res); |
| } |
| while (1) { |
| if (data) { |
| if (PyList_Append(chunks, data) < 0) { |
| Py_DECREF(data); |
| Py_DECREF(chunks); |
| return NULL; |
| } |
| Py_DECREF(data); |
| } |
| |
| /* Read until EOF or until read() would block. */ |
| data = PyObject_CallMethodObjArgs(self->raw, _PyIO_str_read, NULL); |
| if (data == NULL) { |
| Py_DECREF(chunks); |
| return NULL; |
| } |
| if (data != Py_None && !PyBytes_Check(data)) { |
| Py_DECREF(data); |
| Py_DECREF(chunks); |
| PyErr_SetString(PyExc_TypeError, "read() should return bytes"); |
| return NULL; |
| } |
| if (data == Py_None || PyBytes_GET_SIZE(data) == 0) { |
| if (current_size == 0) { |
| Py_DECREF(chunks); |
| return data; |
| } |
| else { |
| res = _PyBytes_Join(_PyIO_empty_bytes, chunks); |
| Py_DECREF(data); |
| Py_DECREF(chunks); |
| return res; |
| } |
| } |
| current_size += PyBytes_GET_SIZE(data); |
| if (self->abs_pos != -1) |
| self->abs_pos += PyBytes_GET_SIZE(data); |
| } |
| } |
| |
| /* The number of bytes to read is specified, return at most n bytes. */ |
| current_size = Py_SAFE_DOWNCAST(READAHEAD(self), Py_off_t, Py_ssize_t); |
| if (n <= current_size) { |
| /* Fast path: the data to read is fully buffered. */ |
| res = PyBytes_FromStringAndSize(self->buffer + self->pos, n); |
| if (res == NULL) |
| goto error; |
| self->pos += n; |
| return res; |
| } |
| |
| /* Slow path: read from the stream until enough bytes are read, |
| * or until an EOF occurs or until read() would block. |
| */ |
| res = PyBytes_FromStringAndSize(NULL, n); |
| if (res == NULL) |
| goto error; |
| out = PyBytes_AS_STRING(res); |
| remaining = n; |
| written = 0; |
| if (current_size > 0) { |
| memcpy(out, self->buffer + self->pos, current_size); |
| remaining -= current_size; |
| written += current_size; |
| } |
| _BufferedReader_reset_buf(self); |
| while (remaining > 0) { |
| /* We want to read a whole block at the end into buffer. |
| If we had readv() we could do this in one pass. */ |
| Py_ssize_t r = MINUS_LAST_BLOCK(self, remaining); |
| if (r == 0) |
| break; |
| r = _BufferedReader_raw_read(self, out + written, r); |
| if (r == -1) |
| goto error; |
| if (r == 0 || r == -2) { |
| /* EOF occurred or read() would block. */ |
| if (r == 0 || written > 0) { |
| if (_PyBytes_Resize(&res, written)) |
| goto error; |
| return res; |
| } |
| Py_DECREF(res); |
| Py_INCREF(Py_None); |
| return Py_None; |
| } |
| remaining -= r; |
| written += r; |
| } |
| assert(remaining <= self->buffer_size); |
| self->pos = 0; |
| self->raw_pos = 0; |
| self->read_end = 0; |
| while (self->read_end < self->buffer_size) { |
| Py_ssize_t r = _BufferedReader_fill_buffer(self); |
| if (r == -1) |
| goto error; |
| if (r == 0 || r == -2) { |
| /* EOF occurred or read() would block. */ |
| if (r == 0 || written > 0) { |
| if (_PyBytes_Resize(&res, written)) |
| goto error; |
| return res; |
| } |
| Py_DECREF(res); |
| Py_INCREF(Py_None); |
| return Py_None; |
| } |
| if (remaining > r) { |
| memcpy(out + written, self->buffer + self->pos, r); |
| written += r; |
| self->pos += r; |
| remaining -= r; |
| } |
| else if (remaining > 0) { |
| memcpy(out + written, self->buffer + self->pos, remaining); |
| written += remaining; |
| self->pos += remaining; |
| remaining = 0; |
| } |
| if (remaining == 0) |
| break; |
| } |
| |
| return res; |
| |
| error: |
| Py_XDECREF(res); |
| return NULL; |
| } |
| |
| static PyObject * |
| _BufferedReader_peek_unlocked(BufferedObject *self, Py_ssize_t n) |
| { |
| Py_ssize_t have, r; |
| |
| have = Py_SAFE_DOWNCAST(READAHEAD(self), Py_off_t, Py_ssize_t); |
| /* Constraints: |
| 1. we don't want to advance the file position. |
| 2. we don't want to lose block alignment, so we can't shift the buffer |
| to make some place. |
| Therefore, we either return `have` bytes (if > 0), or a full buffer. |
| */ |
| if (have > 0) { |
| return PyBytes_FromStringAndSize(self->buffer + self->pos, have); |
| } |
| |
| /* Fill the buffer from the raw stream, and copy it to the result. */ |
| _BufferedReader_reset_buf(self); |
| r = _BufferedReader_fill_buffer(self); |
| if (r == -1) |
| return NULL; |
| if (r == -2) |
| r = 0; |
| self->pos = 0; |
| return PyBytes_FromStringAndSize(self->buffer, r); |
| } |
| |
| static PyMethodDef BufferedReader_methods[] = { |
| /* BufferedIOMixin methods */ |
| {"flush", (PyCFunction)BufferedIOMixin_flush, METH_NOARGS}, |
| {"close", (PyCFunction)BufferedIOMixin_close, METH_NOARGS}, |
| {"seekable", (PyCFunction)BufferedIOMixin_seekable, METH_NOARGS}, |
| {"readable", (PyCFunction)BufferedIOMixin_readable, METH_NOARGS}, |
| {"writable", (PyCFunction)BufferedIOMixin_writable, METH_NOARGS}, |
| {"fileno", (PyCFunction)BufferedIOMixin_fileno, METH_NOARGS}, |
| {"isatty", (PyCFunction)BufferedIOMixin_isatty, METH_NOARGS}, |
| |
| {"read", (PyCFunction)Buffered_read, METH_VARARGS}, |
| {"peek", (PyCFunction)Buffered_peek, METH_VARARGS}, |
| {"read1", (PyCFunction)Buffered_read1, METH_VARARGS}, |
| {"readline", (PyCFunction)Buffered_readline, METH_VARARGS}, |
| {"seek", (PyCFunction)Buffered_seek, METH_VARARGS}, |
| {"tell", (PyCFunction)Buffered_tell, METH_NOARGS}, |
| {"truncate", (PyCFunction)Buffered_truncate, METH_VARARGS}, |
| {NULL, NULL} |
| }; |
| |
| static PyMemberDef BufferedReader_members[] = { |
| {"raw", T_OBJECT, offsetof(BufferedObject, raw), 0}, |
| {NULL} |
| }; |
| |
| static PyGetSetDef BufferedReader_getset[] = { |
| {"closed", (getter)BufferedIOMixin_closed_get, NULL, NULL}, |
| {"name", (getter)BufferedIOMixin_name_get, NULL, NULL}, |
| {"mode", (getter)BufferedIOMixin_mode_get, NULL, NULL}, |
| {0} |
| }; |
| |
| |
| PyTypeObject PyBufferedReader_Type = { |
| PyVarObject_HEAD_INIT(NULL, 0) |
| "_io.BufferedReader", /*tp_name*/ |
| sizeof(BufferedObject), /*tp_basicsize*/ |
| 0, /*tp_itemsize*/ |
| (destructor)BufferedObject_dealloc, /*tp_dealloc*/ |
| 0, /*tp_print*/ |
| 0, /*tp_getattr*/ |
| 0, /*tp_setattr*/ |
| 0, /*tp_compare */ |
| 0, /*tp_repr*/ |
| 0, /*tp_as_number*/ |
| 0, /*tp_as_sequence*/ |
| 0, /*tp_as_mapping*/ |
| 0, /*tp_hash */ |
| 0, /*tp_call*/ |
| 0, /*tp_str*/ |
| 0, /*tp_getattro*/ |
| 0, /*tp_setattro*/ |
| 0, /*tp_as_buffer*/ |
| Py_TPFLAGS_DEFAULT | Py_TPFLAGS_BASETYPE |
| | Py_TPFLAGS_HAVE_GC, /*tp_flags*/ |
| BufferedReader_doc, /* tp_doc */ |
| (traverseproc)Buffered_traverse, /* tp_traverse */ |
| (inquiry)Buffered_clear, /* tp_clear */ |
| 0, /* tp_richcompare */ |
| offsetof(BufferedObject, weakreflist), /*tp_weaklistoffset*/ |
| 0, /* tp_iter */ |
| (iternextfunc)Buffered_iternext, /* tp_iternext */ |
| BufferedReader_methods, /* tp_methods */ |
| BufferedReader_members, /* tp_members */ |
| BufferedReader_getset, /* tp_getset */ |
| 0, /* tp_base */ |
| 0, /* tp_dict */ |
| 0, /* tp_descr_get */ |
| 0, /* tp_descr_set */ |
| offsetof(BufferedObject, dict), /* tp_dictoffset */ |
| (initproc)BufferedReader_init, /* tp_init */ |
| 0, /* tp_alloc */ |
| PyType_GenericNew, /* tp_new */ |
| }; |
| |
| |
| |
| static int |
| complain_about_max_buffer_size(void) |
| { |
| if (PyErr_WarnEx(PyExc_DeprecationWarning, |
| "max_buffer_size is deprecated", 1) < 0) |
| return 0; |
| return 1; |
| } |
| |
| /* |
| * class BufferedWriter |
| */ |
| PyDoc_STRVAR(BufferedWriter_doc, |
| "A buffer for a writeable sequential RawIO object.\n" |
| "\n" |
| "The constructor creates a BufferedWriter for the given writeable raw\n" |
| "stream. If the buffer_size is not given, it defaults to\n" |
| "DEFAULT_BUFFER_SIZE. max_buffer_size isn't used anymore.\n" |
| ); |
| |
| static void |
| _BufferedWriter_reset_buf(BufferedObject *self) |
| { |
| self->write_pos = 0; |
| self->write_end = -1; |
| } |
| |
| static int |
| BufferedWriter_init(BufferedObject *self, PyObject *args, PyObject *kwds) |
| { |
| /* TODO: properly deprecate max_buffer_size */ |
| char *kwlist[] = {"raw", "buffer_size", "max_buffer_size", NULL}; |
| Py_ssize_t buffer_size = DEFAULT_BUFFER_SIZE; |
| Py_ssize_t max_buffer_size = -234; |
| PyObject *raw; |
| |
| self->ok = 0; |
| |
| if (!PyArg_ParseTupleAndKeywords(args, kwds, "O|nn:BufferedReader", kwlist, |
| &raw, &buffer_size, &max_buffer_size)) { |
| return -1; |
| } |
| |
| if (max_buffer_size != -234 && !complain_about_max_buffer_size()) |
| return -1; |
| |
| if (_PyIOBase_checkWritable(raw, Py_True) == NULL) |
| return -1; |
| |
| Py_CLEAR(self->raw); |
| Py_INCREF(raw); |
| self->raw = raw; |
| self->readable = 0; |
| self->writable = 1; |
| |
| self->buffer_size = buffer_size; |
| if (_Buffered_init(self) < 0) |
| return -1; |
| _BufferedWriter_reset_buf(self); |
| self->pos = 0; |
| |
| self->ok = 1; |
| return 0; |
| } |
| |
| static Py_ssize_t |
| _BufferedWriter_raw_write(BufferedObject *self, char *start, Py_ssize_t len) |
| { |
| Py_buffer buf; |
| PyObject *memobj, *res; |
| Py_ssize_t n; |
| /* NOTE: the buffer needn't be released as its object is NULL. */ |
| if (PyBuffer_FillInfo(&buf, NULL, start, len, 1, PyBUF_CONTIG_RO) == -1) |
| return -1; |
| memobj = PyMemoryView_FromBuffer(&buf); |
| if (memobj == NULL) |
| return -1; |
| res = PyObject_CallMethodObjArgs(self->raw, _PyIO_str_write, memobj, NULL); |
| Py_DECREF(memobj); |
| if (res == NULL) |
| return -1; |
| n = PyNumber_AsSsize_t(res, PyExc_ValueError); |
| Py_DECREF(res); |
| if (n < 0 || n > len) { |
| PyErr_Format(PyExc_IOError, |
| "raw write() returned invalid length %zd " |
| "(should have been between 0 and %zd)", n, len); |
| return -1; |
| } |
| if (n > 0 && self->abs_pos != -1) |
| self->abs_pos += n; |
| return n; |
| } |
| |
| /* `restore_pos` is 1 if we need to restore the raw stream position at |
| the end, 0 otherwise. */ |
| static PyObject * |
| _BufferedWriter_flush_unlocked(BufferedObject *self, int restore_pos) |
| { |
| Py_ssize_t written = 0; |
| Py_off_t n, rewind; |
| |
| if (!VALID_WRITE_BUFFER(self) || self->write_pos == self->write_end) |
| goto end; |
| /* First, rewind */ |
| rewind = RAW_OFFSET(self) + (self->pos - self->write_pos); |
| if (rewind != 0) { |
| n = _Buffered_raw_seek(self, -rewind, 1); |
| if (n < 0) { |
| goto error; |
| } |
| self->raw_pos -= rewind; |
| } |
| while (self->write_pos < self->write_end) { |
| n = _BufferedWriter_raw_write(self, |
| self->buffer + self->write_pos, |
| Py_SAFE_DOWNCAST(self->write_end - self->write_pos, |
| Py_off_t, Py_ssize_t)); |
| if (n == -1) { |
| Py_ssize_t *w = _Buffered_check_blocking_error(); |
| if (w == NULL) |
| goto error; |
| self->write_pos += *w; |
| self->raw_pos = self->write_pos; |
| written += *w; |
| *w = written; |
| /* Already re-raised */ |
| goto error; |
| } |
| self->write_pos += n; |
| self->raw_pos = self->write_pos; |
| written += Py_SAFE_DOWNCAST(n, Py_off_t, Py_ssize_t); |
| } |
| |
| if (restore_pos) { |
| Py_off_t forward = rewind - written; |
| if (forward != 0) { |
| n = _Buffered_raw_seek(self, forward, 1); |
| if (n < 0) { |
| goto error; |
| } |
| self->raw_pos += forward; |
| } |
| } |
| _BufferedWriter_reset_buf(self); |
| |
| end: |
| Py_RETURN_NONE; |
| |
| error: |
| return NULL; |
| } |
| |
| static PyObject * |
| BufferedWriter_write(BufferedObject *self, PyObject *args) |
| { |
| PyObject *res = NULL; |
| Py_buffer buf; |
| Py_ssize_t written, avail, remaining, n; |
| |
| CHECK_INITIALIZED(self) |
| if (!PyArg_ParseTuple(args, "y*:write", &buf)) { |
| return NULL; |
| } |
| |
| if (BufferedIOMixin_closed(self)) { |
| PyErr_SetString(PyExc_ValueError, "write to closed file"); |
| PyBuffer_Release(&buf); |
| return NULL; |
| } |
| |
| ENTER_BUFFERED(self) |
| |
| /* Fast path: the data to write can be fully buffered. */ |
| if (!VALID_READ_BUFFER(self) && !VALID_WRITE_BUFFER(self)) { |
| self->pos = 0; |
| self->raw_pos = 0; |
| } |
| avail = Py_SAFE_DOWNCAST(self->buffer_size - self->pos, Py_off_t, Py_ssize_t); |
| if (buf.len <= avail) { |
| memcpy(self->buffer + self->pos, buf.buf, buf.len); |
| if (!VALID_WRITE_BUFFER(self)) { |
| self->write_pos = self->pos; |
| } |
| ADJUST_POSITION(self, self->pos + buf.len); |
| if (self->pos > self->write_end) |
| self->write_end = self->pos; |
| written = buf.len; |
| goto end; |
| } |
| |
| /* First write the current buffer */ |
| res = _BufferedWriter_flush_unlocked(self, 0); |
| if (res == NULL) { |
| Py_ssize_t *w = _Buffered_check_blocking_error(); |
| if (w == NULL) |
| goto error; |
| if (self->readable) |
| _BufferedReader_reset_buf(self); |
| /* Make some place by shifting the buffer. */ |
| assert(VALID_WRITE_BUFFER(self)); |
| memmove(self->buffer, self->buffer + self->write_pos, |
| Py_SAFE_DOWNCAST(self->write_end - self->write_pos, |
| Py_off_t, Py_ssize_t)); |
| self->write_end -= self->write_pos; |
| self->raw_pos -= self->write_pos; |
| self->pos -= self->write_pos; |
| self->write_pos = 0; |
| avail = Py_SAFE_DOWNCAST(self->buffer_size - self->write_end, |
| Py_off_t, Py_ssize_t); |
| if (buf.len <= avail) { |
| /* Everything can be buffered */ |
| PyErr_Clear(); |
| memcpy(self->buffer + self->write_end, buf.buf, buf.len); |
| self->write_end += buf.len; |
| written = buf.len; |
| goto end; |
| } |
| /* Buffer as much as possible. */ |
| memcpy(self->buffer + self->write_end, buf.buf, avail); |
| self->write_end += avail; |
| /* Already re-raised */ |
| *w = avail; |
| goto error; |
| } |
| Py_CLEAR(res); |
| |
| /* Then write buf itself. At this point the buffer has been emptied. */ |
| remaining = buf.len; |
| written = 0; |
| while (remaining > self->buffer_size) { |
| n = _BufferedWriter_raw_write( |
| self, (char *) buf.buf + written, buf.len - written); |
| if (n == -1) { |
| Py_ssize_t *w = _Buffered_check_blocking_error(); |
| if (w == NULL) |
| goto error; |
| written += *w; |
| remaining -= *w; |
| if (remaining > self->buffer_size) { |
| /* Can't buffer everything, still buffer as much as possible */ |
| memcpy(self->buffer, |
| (char *) buf.buf + written, self->buffer_size); |
| self->raw_pos = 0; |
| ADJUST_POSITION(self, self->buffer_size); |
| self->write_end = self->buffer_size; |
| *w = written + self->buffer_size; |
| /* Already re-raised */ |
| goto error; |
| } |
| PyErr_Clear(); |
| break; |
| } |
| written += n; |
| remaining -= n; |
| } |
| if (self->readable) |
| _BufferedReader_reset_buf(self); |
| if (remaining > 0) { |
| memcpy(self->buffer, (char *) buf.buf + written, remaining); |
| written += remaining; |
| } |
| self->write_pos = 0; |
| /* TODO: sanity check (remaining >= 0) */ |
| self->write_end = remaining; |
| ADJUST_POSITION(self, remaining); |
| self->raw_pos = 0; |
| |
| end: |
| res = PyLong_FromSsize_t(written); |
| |
| error: |
| LEAVE_BUFFERED(self) |
| PyBuffer_Release(&buf); |
| return res; |
| } |
| |
| static PyMethodDef BufferedWriter_methods[] = { |
| /* BufferedIOMixin methods */ |
| {"close", (PyCFunction)BufferedIOMixin_close, METH_NOARGS}, |
| {"seekable", (PyCFunction)BufferedIOMixin_seekable, METH_NOARGS}, |
| {"readable", (PyCFunction)BufferedIOMixin_readable, METH_NOARGS}, |
| {"writable", (PyCFunction)BufferedIOMixin_writable, METH_NOARGS}, |
| {"fileno", (PyCFunction)BufferedIOMixin_fileno, METH_NOARGS}, |
| {"isatty", (PyCFunction)BufferedIOMixin_isatty, METH_NOARGS}, |
| |
| {"write", (PyCFunction)BufferedWriter_write, METH_VARARGS}, |
| {"truncate", (PyCFunction)Buffered_truncate, METH_VARARGS}, |
| {"flush", (PyCFunction)Buffered_flush, METH_NOARGS}, |
| {"seek", (PyCFunction)Buffered_seek, METH_VARARGS}, |
| {"tell", (PyCFunction)Buffered_tell, METH_NOARGS}, |
| {NULL, NULL} |
| }; |
| |
| static PyMemberDef BufferedWriter_members[] = { |
| {"raw", T_OBJECT, offsetof(BufferedObject, raw), 0}, |
| {NULL} |
| }; |
| |
| static PyGetSetDef BufferedWriter_getset[] = { |
| {"closed", (getter)BufferedIOMixin_closed_get, NULL, NULL}, |
| {"name", (getter)BufferedIOMixin_name_get, NULL, NULL}, |
| {"mode", (getter)BufferedIOMixin_mode_get, NULL, NULL}, |
| {0} |
| }; |
| |
| |
| PyTypeObject PyBufferedWriter_Type = { |
| PyVarObject_HEAD_INIT(NULL, 0) |
| "_io.BufferedWriter", /*tp_name*/ |
| sizeof(BufferedObject), /*tp_basicsize*/ |
| 0, /*tp_itemsize*/ |
| (destructor)BufferedObject_dealloc, /*tp_dealloc*/ |
| 0, /*tp_print*/ |
| 0, /*tp_getattr*/ |
| 0, /*tp_setattr*/ |
| 0, /*tp_compare */ |
| 0, /*tp_repr*/ |
| 0, /*tp_as_number*/ |
| 0, /*tp_as_sequence*/ |
| 0, /*tp_as_mapping*/ |
| 0, /*tp_hash */ |
| 0, /*tp_call*/ |
| 0, /*tp_str*/ |
| 0, /*tp_getattro*/ |
| 0, /*tp_setattro*/ |
| 0, /*tp_as_buffer*/ |
| Py_TPFLAGS_DEFAULT | Py_TPFLAGS_BASETYPE |
| | Py_TPFLAGS_HAVE_GC, /*tp_flags*/ |
| BufferedWriter_doc, /* tp_doc */ |
| (traverseproc)Buffered_traverse, /* tp_traverse */ |
| (inquiry)Buffered_clear, /* tp_clear */ |
| 0, /* tp_richcompare */ |
| offsetof(BufferedObject, weakreflist), /*tp_weaklistoffset*/ |
| 0, /* tp_iter */ |
| 0, /* tp_iternext */ |
| BufferedWriter_methods, /* tp_methods */ |
| BufferedWriter_members, /* tp_members */ |
| BufferedWriter_getset, /* tp_getset */ |
| 0, /* tp_base */ |
| 0, /* tp_dict */ |
| 0, /* tp_descr_get */ |
| 0, /* tp_descr_set */ |
| offsetof(BufferedObject, dict), /* tp_dictoffset */ |
| (initproc)BufferedWriter_init, /* tp_init */ |
| 0, /* tp_alloc */ |
| PyType_GenericNew, /* tp_new */ |
| }; |
| |
| |
| |
| /* |
| * BufferedRWPair |
| */ |
| |
| PyDoc_STRVAR(BufferedRWPair_doc, |
| "A buffered reader and writer object together.\n" |
| "\n" |
| "A buffered reader object and buffered writer object put together to\n" |
| "form a sequential IO object that can read and write. This is typically\n" |
| "used with a socket or two-way pipe.\n" |
| "\n" |
| "reader and writer are RawIOBase objects that are readable and\n" |
| "writeable respectively. If the buffer_size is omitted it defaults to\n" |
| "DEFAULT_BUFFER_SIZE.\n" |
| ); |
| |
| /* XXX The usefulness of this (compared to having two separate IO objects) is |
| * questionable. |
| */ |
| |
| typedef struct { |
| PyObject_HEAD |
| BufferedObject *reader; |
| BufferedObject *writer; |
| PyObject *dict; |
| PyObject *weakreflist; |
| } BufferedRWPairObject; |
| |
| static int |
| BufferedRWPair_init(BufferedRWPairObject *self, PyObject *args, |
| PyObject *kwds) |
| { |
| PyObject *reader, *writer; |
| Py_ssize_t buffer_size = DEFAULT_BUFFER_SIZE; |
| Py_ssize_t max_buffer_size = -234; |
| |
| if (!PyArg_ParseTuple(args, "OO|nn:BufferedRWPair", &reader, &writer, |
| &buffer_size, &max_buffer_size)) { |
| return -1; |
| } |
| |
| if (max_buffer_size != -234 && !complain_about_max_buffer_size()) |
| return -1; |
| |
| if (_PyIOBase_checkReadable(reader, Py_True) == NULL) |
| return -1; |
| if (_PyIOBase_checkWritable(writer, Py_True) == NULL) |
| return -1; |
| |
| args = Py_BuildValue("(n)", buffer_size); |
| if (args == NULL) { |
| Py_CLEAR(self->reader); |
| return -1; |
| } |
| self->reader = (BufferedObject *)PyType_GenericNew( |
| &PyBufferedReader_Type, args, NULL); |
| Py_DECREF(args); |
| if (self->reader == NULL) |
| return -1; |
| |
| args = Py_BuildValue("(n)", buffer_size); |
| if (args == NULL) { |
| Py_CLEAR(self->reader); |
| return -1; |
| } |
| self->writer = (BufferedObject *)PyType_GenericNew( |
| &PyBufferedWriter_Type, args, NULL); |
| Py_DECREF(args); |
| if (self->writer == NULL) { |
| Py_CLEAR(self->reader); |
| return -1; |
| } |
| return 0; |
| } |
| |
| static int |
| BufferedRWPair_traverse(BufferedRWPairObject *self, visitproc visit, void *arg) |
| { |
| Py_VISIT(self->dict); |
| return 0; |
| } |
| |
| static int |
| BufferedRWPair_clear(BufferedRWPairObject *self) |
| { |
| Py_CLEAR(self->reader); |
| Py_CLEAR(self->writer); |
| Py_CLEAR(self->dict); |
| return 0; |
| } |
| |
| static void |
| BufferedRWPair_dealloc(BufferedRWPairObject *self) |
| { |
| _PyObject_GC_UNTRACK(self); |
| Py_CLEAR(self->reader); |
| Py_CLEAR(self->writer); |
| Py_CLEAR(self->dict); |
| Py_TYPE(self)->tp_free((PyObject *) self); |
| } |
| |
| static PyObject * |
| _forward_call(BufferedObject *self, const char *name, PyObject *args) |
| { |
| PyObject *func = PyObject_GetAttrString((PyObject *)self, name); |
| PyObject *ret; |
| |
| if (func == NULL) { |
| PyErr_SetString(PyExc_AttributeError, name); |
| return NULL; |
| } |
| |
| ret = PyObject_CallObject(func, args); |
| Py_DECREF(func); |
| return ret; |
| } |
| |
| static PyObject * |
| BufferedRWPair_read(BufferedRWPairObject *self, PyObject *args) |
| { |
| return _forward_call(self->reader, "read", args); |
| } |
| |
| static PyObject * |
| BufferedRWPair_peek(BufferedRWPairObject *self, PyObject *args) |
| { |
| return _forward_call(self->reader, "peek", args); |
| } |
| |
| static PyObject * |
| BufferedRWPair_read1(BufferedRWPairObject *self, PyObject *args) |
| { |
| return _forward_call(self->reader, "read1", args); |
| } |
| |
| static PyObject * |
| BufferedRWPair_write(BufferedRWPairObject *self, PyObject *args) |
| { |
| return _forward_call(self->writer, "write", args); |
| } |
| |
| static PyObject * |
| BufferedRWPair_flush(BufferedRWPairObject *self, PyObject *args) |
| { |
| return _forward_call(self->writer, "flush", args); |
| } |
| |
| static PyObject * |
| BufferedRWPair_readable(BufferedRWPairObject *self, PyObject *args) |
| { |
| return _forward_call(self->reader, "readable", args); |
| } |
| |
| static PyObject * |
| BufferedRWPair_writable(BufferedRWPairObject *self, PyObject *args) |
| { |
| return _forward_call(self->writer, "writable", args); |
| } |
| |
| static PyObject * |
| BufferedRWPair_close(BufferedRWPairObject *self, PyObject *args) |
| { |
| PyObject *ret = _forward_call(self->writer, "close", args); |
| if (ret == NULL) |
| return NULL; |
| Py_DECREF(ret); |
| |
| return _forward_call(self->reader, "close", args); |
| } |
| |
| static PyObject * |
| BufferedRWPair_isatty(BufferedRWPairObject *self, PyObject *args) |
| { |
| PyObject *ret = _forward_call(self->writer, "isatty", args); |
| |
| if (ret != Py_False) { |
| /* either True or exception */ |
| return ret; |
| } |
| Py_DECREF(ret); |
| |
| return _forward_call(self->reader, "isatty", args); |
| } |
| |
| |
| static PyMethodDef BufferedRWPair_methods[] = { |
| {"read", (PyCFunction)BufferedRWPair_read, METH_VARARGS}, |
| {"peek", (PyCFunction)BufferedRWPair_peek, METH_VARARGS}, |
| {"read1", (PyCFunction)BufferedRWPair_read1, METH_VARARGS}, |
| {"readinto", (PyCFunction)Buffered_readinto, METH_VARARGS}, |
| |
| {"write", (PyCFunction)BufferedRWPair_write, METH_VARARGS}, |
| {"flush", (PyCFunction)BufferedRWPair_flush, METH_NOARGS}, |
| |
| {"readable", (PyCFunction)BufferedRWPair_readable, METH_NOARGS}, |
| {"writable", (PyCFunction)BufferedRWPair_writable, METH_NOARGS}, |
| |
| {"close", (PyCFunction)BufferedRWPair_close, METH_NOARGS}, |
| {"isatty", (PyCFunction)BufferedRWPair_isatty, METH_NOARGS}, |
| |
| {NULL, NULL} |
| }; |
| |
| PyTypeObject PyBufferedRWPair_Type = { |
| PyVarObject_HEAD_INIT(NULL, 0) |
| "_io.BufferedRWPair", /*tp_name*/ |
| sizeof(BufferedRWPairObject), /*tp_basicsize*/ |
| 0, /*tp_itemsize*/ |
| (destructor)BufferedRWPair_dealloc, /*tp_dealloc*/ |
| 0, /*tp_print*/ |
| 0, /*tp_getattr*/ |
| 0, /*tp_setattr*/ |
| 0, /*tp_compare */ |
| 0, /*tp_repr*/ |
| 0, /*tp_as_number*/ |
| 0, /*tp_as_sequence*/ |
| 0, /*tp_as_mapping*/ |
| 0, /*tp_hash */ |
| 0, /*tp_call*/ |
| 0, /*tp_str*/ |
| 0, /*tp_getattro*/ |
| 0, /*tp_setattro*/ |
| 0, /*tp_as_buffer*/ |
| Py_TPFLAGS_DEFAULT | Py_TPFLAGS_BASETYPE |
| | Py_TPFLAGS_HAVE_GC, /* tp_flags */ |
| BufferedRWPair_doc, /* tp_doc */ |
| (traverseproc)BufferedRWPair_traverse, /* tp_traverse */ |
| (inquiry)BufferedRWPair_clear, /* tp_clear */ |
| 0, /* tp_richcompare */ |
| offsetof(BufferedRWPairObject, weakreflist), /*tp_weaklistoffset*/ |
| 0, /* tp_iter */ |
| 0, /* tp_iternext */ |
| BufferedRWPair_methods, /* tp_methods */ |
| 0, /* tp_members */ |
| 0, /* tp_getset */ |
| 0, /* tp_base */ |
| 0, /* tp_dict */ |
| 0, /* tp_descr_get */ |
| 0, /* tp_descr_set */ |
| offsetof(BufferedRWPairObject, dict), /* tp_dictoffset */ |
| (initproc)BufferedRWPair_init, /* tp_init */ |
| 0, /* tp_alloc */ |
| PyType_GenericNew, /* tp_new */ |
| }; |
| |
| |
| |
| /* |
| * BufferedRandom |
| */ |
| |
| PyDoc_STRVAR(BufferedRandom_doc, |
| "A buffered interface to random access streams.\n" |
| "\n" |
| "The constructor creates a reader and writer for a seekable stream,\n" |
| "raw, given in the first argument. If the buffer_size is omitted it\n" |
| "defaults to DEFAULT_BUFFER_SIZE. max_buffer_size isn't used anymore.\n" |
| ); |
| |
| static int |
| BufferedRandom_init(BufferedObject *self, PyObject *args, PyObject *kwds) |
| { |
| char *kwlist[] = {"raw", "buffer_size", "max_buffer_size", NULL}; |
| Py_ssize_t buffer_size = DEFAULT_BUFFER_SIZE; |
| Py_ssize_t max_buffer_size = -234; |
| PyObject *raw; |
| |
| self->ok = 0; |
| |
| if (!PyArg_ParseTupleAndKeywords(args, kwds, "O|nn:BufferedReader", kwlist, |
| &raw, &buffer_size, &max_buffer_size)) { |
| return -1; |
| } |
| |
| if (max_buffer_size != -234 && !complain_about_max_buffer_size()) |
| return -1; |
| |
| if (_PyIOBase_checkSeekable(raw, Py_True) == NULL) |
| return -1; |
| if (_PyIOBase_checkReadable(raw, Py_True) == NULL) |
| return -1; |
| if (_PyIOBase_checkWritable(raw, Py_True) == NULL) |
| return -1; |
| |
| Py_CLEAR(self->raw); |
| Py_INCREF(raw); |
| self->raw = raw; |
| self->buffer_size = buffer_size; |
| self->readable = 1; |
| self->writable = 1; |
| |
| if (_Buffered_init(self) < 0) |
| return -1; |
| _BufferedReader_reset_buf(self); |
| _BufferedWriter_reset_buf(self); |
| self->pos = 0; |
| |
| self->ok = 1; |
| return 0; |
| } |
| |
| static PyMethodDef BufferedRandom_methods[] = { |
| /* BufferedIOMixin methods */ |
| {"close", (PyCFunction)BufferedIOMixin_close, METH_NOARGS}, |
| {"seekable", (PyCFunction)BufferedIOMixin_seekable, METH_NOARGS}, |
| {"readable", (PyCFunction)BufferedIOMixin_readable, METH_NOARGS}, |
| {"writable", (PyCFunction)BufferedIOMixin_writable, METH_NOARGS}, |
| {"fileno", (PyCFunction)BufferedIOMixin_fileno, METH_NOARGS}, |
| {"isatty", (PyCFunction)BufferedIOMixin_isatty, METH_NOARGS}, |
| |
| {"flush", (PyCFunction)Buffered_flush, METH_NOARGS}, |
| |
| {"seek", (PyCFunction)Buffered_seek, METH_VARARGS}, |
| {"tell", (PyCFunction)Buffered_tell, METH_NOARGS}, |
| {"truncate", (PyCFunction)Buffered_truncate, METH_VARARGS}, |
| {"read", (PyCFunction)Buffered_read, METH_VARARGS}, |
| {"read1", (PyCFunction)Buffered_read1, METH_VARARGS}, |
| {"readinto", (PyCFunction)Buffered_readinto, METH_VARARGS}, |
| {"readline", (PyCFunction)Buffered_readline, METH_VARARGS}, |
| {"peek", (PyCFunction)Buffered_peek, METH_VARARGS}, |
| {"write", (PyCFunction)BufferedWriter_write, METH_VARARGS}, |
| {NULL, NULL} |
| }; |
| |
| static PyMemberDef BufferedRandom_members[] = { |
| {"raw", T_OBJECT, offsetof(BufferedObject, raw), 0}, |
| {NULL} |
| }; |
| |
| static PyGetSetDef BufferedRandom_getset[] = { |
| {"closed", (getter)BufferedIOMixin_closed_get, NULL, NULL}, |
| {"name", (getter)BufferedIOMixin_name_get, NULL, NULL}, |
| {"mode", (getter)BufferedIOMixin_mode_get, NULL, NULL}, |
| {0} |
| }; |
| |
| |
| PyTypeObject PyBufferedRandom_Type = { |
| PyVarObject_HEAD_INIT(NULL, 0) |
| "_io.BufferedRandom", /*tp_name*/ |
| sizeof(BufferedObject), /*tp_basicsize*/ |
| 0, /*tp_itemsize*/ |
| (destructor)BufferedObject_dealloc, /*tp_dealloc*/ |
| 0, /*tp_print*/ |
| 0, /*tp_getattr*/ |
| 0, /*tp_setattr*/ |
| 0, /*tp_compare */ |
| 0, /*tp_repr*/ |
| 0, /*tp_as_number*/ |
| 0, /*tp_as_sequence*/ |
| 0, /*tp_as_mapping*/ |
| 0, /*tp_hash */ |
| 0, /*tp_call*/ |
| 0, /*tp_str*/ |
| 0, /*tp_getattro*/ |
| 0, /*tp_setattro*/ |
| 0, /*tp_as_buffer*/ |
| Py_TPFLAGS_DEFAULT | Py_TPFLAGS_BASETYPE |
| | Py_TPFLAGS_HAVE_GC, /*tp_flags*/ |
| BufferedRandom_doc, /* tp_doc */ |
| (traverseproc)Buffered_traverse, /* tp_traverse */ |
| (inquiry)Buffered_clear, /* tp_clear */ |
| 0, /* tp_richcompare */ |
| offsetof(BufferedObject, weakreflist), /*tp_weaklistoffset*/ |
| 0, /* tp_iter */ |
| (iternextfunc)Buffered_iternext, /* tp_iternext */ |
| BufferedRandom_methods, /* tp_methods */ |
| BufferedRandom_members, /* tp_members */ |
| BufferedRandom_getset, /* tp_getset */ |
| 0, /* tp_base */ |
| 0, /*tp_dict*/ |
| 0, /* tp_descr_get */ |
| 0, /* tp_descr_set */ |
| offsetof(BufferedObject, dict), /*tp_dictoffset*/ |
| (initproc)BufferedRandom_init, /* tp_init */ |
| 0, /* tp_alloc */ |
| PyType_GenericNew, /* tp_new */ |
| }; |
| |