| .. _logging-cookbook: |
| |
| ================ |
| Logging Cookbook |
| ================ |
| |
| :Author: Vinay Sajip <vinay_sajip at red-dove dot com> |
| |
| This page contains a number of recipes related to logging, which have been found |
| useful in the past. |
| |
| .. currentmodule:: logging |
| |
| Using logging in multiple modules |
| --------------------------------- |
| |
| Multiple calls to ``logging.getLogger('someLogger')`` return a reference to the |
| same logger object. This is true not only within the same module, but also |
| across modules as long as it is in the same Python interpreter process. It is |
| true for references to the same object; additionally, application code can |
| define and configure a parent logger in one module and create (but not |
| configure) a child logger in a separate module, and all logger calls to the |
| child will pass up to the parent. Here is a main module:: |
| |
| import logging |
| import auxiliary_module |
| |
| # create logger with 'spam_application' |
| logger = logging.getLogger('spam_application') |
| logger.setLevel(logging.DEBUG) |
| # create file handler which logs even debug messages |
| fh = logging.FileHandler('spam.log') |
| fh.setLevel(logging.DEBUG) |
| # create console handler with a higher log level |
| ch = logging.StreamHandler() |
| ch.setLevel(logging.ERROR) |
| # create formatter and add it to the handlers |
| formatter = logging.Formatter('%(asctime)s - %(name)s - %(levelname)s - %(message)s') |
| fh.setFormatter(formatter) |
| ch.setFormatter(formatter) |
| # add the handlers to the logger |
| logger.addHandler(fh) |
| logger.addHandler(ch) |
| |
| logger.info('creating an instance of auxiliary_module.Auxiliary') |
| a = auxiliary_module.Auxiliary() |
| logger.info('created an instance of auxiliary_module.Auxiliary') |
| logger.info('calling auxiliary_module.Auxiliary.do_something') |
| a.do_something() |
| logger.info('finished auxiliary_module.Auxiliary.do_something') |
| logger.info('calling auxiliary_module.some_function()') |
| auxiliary_module.some_function() |
| logger.info('done with auxiliary_module.some_function()') |
| |
| Here is the auxiliary module:: |
| |
| import logging |
| |
| # create logger |
| module_logger = logging.getLogger('spam_application.auxiliary') |
| |
| class Auxiliary: |
| def __init__(self): |
| self.logger = logging.getLogger('spam_application.auxiliary.Auxiliary') |
| self.logger.info('creating an instance of Auxiliary') |
| def do_something(self): |
| self.logger.info('doing something') |
| a = 1 + 1 |
| self.logger.info('done doing something') |
| |
| def some_function(): |
| module_logger.info('received a call to "some_function"') |
| |
| The output looks like this:: |
| |
| 2005-03-23 23:47:11,663 - spam_application - INFO - |
| creating an instance of auxiliary_module.Auxiliary |
| 2005-03-23 23:47:11,665 - spam_application.auxiliary.Auxiliary - INFO - |
| creating an instance of Auxiliary |
| 2005-03-23 23:47:11,665 - spam_application - INFO - |
| created an instance of auxiliary_module.Auxiliary |
| 2005-03-23 23:47:11,668 - spam_application - INFO - |
| calling auxiliary_module.Auxiliary.do_something |
| 2005-03-23 23:47:11,668 - spam_application.auxiliary.Auxiliary - INFO - |
| doing something |
| 2005-03-23 23:47:11,669 - spam_application.auxiliary.Auxiliary - INFO - |
| done doing something |
| 2005-03-23 23:47:11,670 - spam_application - INFO - |
| finished auxiliary_module.Auxiliary.do_something |
| 2005-03-23 23:47:11,671 - spam_application - INFO - |
| calling auxiliary_module.some_function() |
| 2005-03-23 23:47:11,672 - spam_application.auxiliary - INFO - |
| received a call to 'some_function' |
| 2005-03-23 23:47:11,673 - spam_application - INFO - |
| done with auxiliary_module.some_function() |
| |
| Multiple handlers and formatters |
| -------------------------------- |
| |
| Loggers are plain Python objects. The :func:`addHandler` method has no minimum |
| or maximum quota for the number of handlers you may add. Sometimes it will be |
| beneficial for an application to log all messages of all severities to a text |
| file while simultaneously logging errors or above to the console. To set this |
| up, simply configure the appropriate handlers. The logging calls in the |
| application code will remain unchanged. Here is a slight modification to the |
| previous simple module-based configuration example:: |
| |
| import logging |
| |
| logger = logging.getLogger('simple_example') |
| logger.setLevel(logging.DEBUG) |
| # create file handler which logs even debug messages |
| fh = logging.FileHandler('spam.log') |
| fh.setLevel(logging.DEBUG) |
| # create console handler with a higher log level |
| ch = logging.StreamHandler() |
| ch.setLevel(logging.ERROR) |
| # create formatter and add it to the handlers |
| formatter = logging.Formatter('%(asctime)s - %(name)s - %(levelname)s - %(message)s') |
| ch.setFormatter(formatter) |
| fh.setFormatter(formatter) |
| # add the handlers to logger |
| logger.addHandler(ch) |
| logger.addHandler(fh) |
| |
| # 'application' code |
| logger.debug('debug message') |
| logger.info('info message') |
| logger.warn('warn message') |
| logger.error('error message') |
| logger.critical('critical message') |
| |
| Notice that the 'application' code does not care about multiple handlers. All |
| that changed was the addition and configuration of a new handler named *fh*. |
| |
| The ability to create new handlers with higher- or lower-severity filters can be |
| very helpful when writing and testing an application. Instead of using many |
| ``print`` statements for debugging, use ``logger.debug``: Unlike the print |
| statements, which you will have to delete or comment out later, the logger.debug |
| statements can remain intact in the source code and remain dormant until you |
| need them again. At that time, the only change that needs to happen is to |
| modify the severity level of the logger and/or handler to debug. |
| |
| .. _multiple-destinations: |
| |
| Logging to multiple destinations |
| -------------------------------- |
| |
| Let's say you want to log to console and file with different message formats and |
| in differing circumstances. Say you want to log messages with levels of DEBUG |
| and higher to file, and those messages at level INFO and higher to the console. |
| Let's also assume that the file should contain timestamps, but the console |
| messages should not. Here's how you can achieve this:: |
| |
| import logging |
| |
| # set up logging to file - see previous section for more details |
| logging.basicConfig(level=logging.DEBUG, |
| format='%(asctime)s %(name)-12s %(levelname)-8s %(message)s', |
| datefmt='%m-%d %H:%M', |
| filename='/temp/myapp.log', |
| filemode='w') |
| # define a Handler which writes INFO messages or higher to the sys.stderr |
| console = logging.StreamHandler() |
| console.setLevel(logging.INFO) |
| # set a format which is simpler for console use |
| formatter = logging.Formatter('%(name)-12s: %(levelname)-8s %(message)s') |
| # tell the handler to use this format |
| console.setFormatter(formatter) |
| # add the handler to the root logger |
| logging.getLogger('').addHandler(console) |
| |
| # Now, we can log to the root logger, or any other logger. First the root... |
| logging.info('Jackdaws love my big sphinx of quartz.') |
| |
| # Now, define a couple of other loggers which might represent areas in your |
| # application: |
| |
| logger1 = logging.getLogger('myapp.area1') |
| logger2 = logging.getLogger('myapp.area2') |
| |
| logger1.debug('Quick zephyrs blow, vexing daft Jim.') |
| logger1.info('How quickly daft jumping zebras vex.') |
| logger2.warning('Jail zesty vixen who grabbed pay from quack.') |
| logger2.error('The five boxing wizards jump quickly.') |
| |
| When you run this, on the console you will see :: |
| |
| root : INFO Jackdaws love my big sphinx of quartz. |
| myapp.area1 : INFO How quickly daft jumping zebras vex. |
| myapp.area2 : WARNING Jail zesty vixen who grabbed pay from quack. |
| myapp.area2 : ERROR The five boxing wizards jump quickly. |
| |
| and in the file you will see something like :: |
| |
| 10-22 22:19 root INFO Jackdaws love my big sphinx of quartz. |
| 10-22 22:19 myapp.area1 DEBUG Quick zephyrs blow, vexing daft Jim. |
| 10-22 22:19 myapp.area1 INFO How quickly daft jumping zebras vex. |
| 10-22 22:19 myapp.area2 WARNING Jail zesty vixen who grabbed pay from quack. |
| 10-22 22:19 myapp.area2 ERROR The five boxing wizards jump quickly. |
| |
| As you can see, the DEBUG message only shows up in the file. The other messages |
| are sent to both destinations. |
| |
| This example uses console and file handlers, but you can use any number and |
| combination of handlers you choose. |
| |
| |
| Configuration server example |
| ---------------------------- |
| |
| Here is an example of a module using the logging configuration server:: |
| |
| import logging |
| import logging.config |
| import time |
| import os |
| |
| # read initial config file |
| logging.config.fileConfig('logging.conf') |
| |
| # create and start listener on port 9999 |
| t = logging.config.listen(9999) |
| t.start() |
| |
| logger = logging.getLogger('simpleExample') |
| |
| try: |
| # loop through logging calls to see the difference |
| # new configurations make, until Ctrl+C is pressed |
| while True: |
| logger.debug('debug message') |
| logger.info('info message') |
| logger.warn('warn message') |
| logger.error('error message') |
| logger.critical('critical message') |
| time.sleep(5) |
| except KeyboardInterrupt: |
| # cleanup |
| logging.config.stopListening() |
| t.join() |
| |
| And here is a script that takes a filename and sends that file to the server, |
| properly preceded with the binary-encoded length, as the new logging |
| configuration:: |
| |
| #!/usr/bin/env python |
| import socket, sys, struct |
| |
| with open(sys.argv[1], 'rb') as f: |
| data_to_send = f.read() |
| |
| HOST = 'localhost' |
| PORT = 9999 |
| s = socket.socket(socket.AF_INET, socket.SOCK_STREAM) |
| print('connecting...') |
| s.connect((HOST, PORT)) |
| print('sending config...') |
| s.send(struct.pack('>L', len(data_to_send))) |
| s.send(data_to_send) |
| s.close() |
| print('complete') |
| |
| |
| Dealing with handlers that block |
| -------------------------------- |
| |
| .. currentmodule:: logging.handlers |
| |
| Sometimes you have to get your logging handlers to do their work without |
| blocking the thread you're logging from. This is common in Web applications, |
| though of course it also occurs in other scenarios. |
| |
| A common culprit which demonstrates sluggish behaviour is the |
| :class:`SMTPHandler`: sending emails can take a long time, for a |
| number of reasons outside the developer's control (for example, a poorly |
| performing mail or network infrastructure). But almost any network-based |
| handler can block: Even a :class:`SocketHandler` operation may do a |
| DNS query under the hood which is too slow (and this query can be deep in the |
| socket library code, below the Python layer, and outside your control). |
| |
| One solution is to use a two-part approach. For the first part, attach only a |
| :class:`QueueHandler` to those loggers which are accessed from |
| performance-critical threads. They simply write to their queue, which can be |
| sized to a large enough capacity or initialized with no upper bound to their |
| size. The write to the queue will typically be accepted quickly, though you |
| will probably need to catch the :exc:`queue.Full` exception as a precaution |
| in your code. If you are a library developer who has performance-critical |
| threads in their code, be sure to document this (together with a suggestion to |
| attach only ``QueueHandlers`` to your loggers) for the benefit of other |
| developers who will use your code. |
| |
| The second part of the solution is :class:`QueueListener`, which has been |
| designed as the counterpart to :class:`QueueHandler`. A |
| :class:`QueueListener` is very simple: it's passed a queue and some handlers, |
| and it fires up an internal thread which listens to its queue for LogRecords |
| sent from ``QueueHandlers`` (or any other source of ``LogRecords``, for that |
| matter). The ``LogRecords`` are removed from the queue and passed to the |
| handlers for processing. |
| |
| The advantage of having a separate :class:`QueueListener` class is that you |
| can use the same instance to service multiple ``QueueHandlers``. This is more |
| resource-friendly than, say, having threaded versions of the existing handler |
| classes, which would eat up one thread per handler for no particular benefit. |
| |
| An example of using these two classes follows (imports omitted):: |
| |
| que = queue.Queue(-1) # no limit on size |
| queue_handler = QueueHandler(que) |
| handler = logging.StreamHandler() |
| listener = QueueListener(que, handler) |
| root = logging.getLogger() |
| root.addHandler(queue_handler) |
| formatter = logging.Formatter('%(threadName)s: %(message)s') |
| handler.setFormatter(formatter) |
| listener.start() |
| # The log output will display the thread which generated |
| # the event (the main thread) rather than the internal |
| # thread which monitors the internal queue. This is what |
| # you want to happen. |
| root.warning('Look out!') |
| listener.stop() |
| |
| which, when run, will produce:: |
| |
| MainThread: Look out! |
| |
| |
| .. _network-logging: |
| |
| Sending and receiving logging events across a network |
| ----------------------------------------------------- |
| |
| Let's say you want to send logging events across a network, and handle them at |
| the receiving end. A simple way of doing this is attaching a |
| :class:`SocketHandler` instance to the root logger at the sending end:: |
| |
| import logging, logging.handlers |
| |
| rootLogger = logging.getLogger('') |
| rootLogger.setLevel(logging.DEBUG) |
| socketHandler = logging.handlers.SocketHandler('localhost', |
| logging.handlers.DEFAULT_TCP_LOGGING_PORT) |
| # don't bother with a formatter, since a socket handler sends the event as |
| # an unformatted pickle |
| rootLogger.addHandler(socketHandler) |
| |
| # Now, we can log to the root logger, or any other logger. First the root... |
| logging.info('Jackdaws love my big sphinx of quartz.') |
| |
| # Now, define a couple of other loggers which might represent areas in your |
| # application: |
| |
| logger1 = logging.getLogger('myapp.area1') |
| logger2 = logging.getLogger('myapp.area2') |
| |
| logger1.debug('Quick zephyrs blow, vexing daft Jim.') |
| logger1.info('How quickly daft jumping zebras vex.') |
| logger2.warning('Jail zesty vixen who grabbed pay from quack.') |
| logger2.error('The five boxing wizards jump quickly.') |
| |
| At the receiving end, you can set up a receiver using the :mod:`socketserver` |
| module. Here is a basic working example:: |
| |
| import pickle |
| import logging |
| import logging.handlers |
| import socketserver |
| import struct |
| |
| |
| class LogRecordStreamHandler(socketserver.StreamRequestHandler): |
| """Handler for a streaming logging request. |
| |
| This basically logs the record using whatever logging policy is |
| configured locally. |
| """ |
| |
| def handle(self): |
| """ |
| Handle multiple requests - each expected to be a 4-byte length, |
| followed by the LogRecord in pickle format. Logs the record |
| according to whatever policy is configured locally. |
| """ |
| while True: |
| chunk = self.connection.recv(4) |
| if len(chunk) < 4: |
| break |
| slen = struct.unpack('>L', chunk)[0] |
| chunk = self.connection.recv(slen) |
| while len(chunk) < slen: |
| chunk = chunk + self.connection.recv(slen - len(chunk)) |
| obj = self.unPickle(chunk) |
| record = logging.makeLogRecord(obj) |
| self.handleLogRecord(record) |
| |
| def unPickle(self, data): |
| return pickle.loads(data) |
| |
| def handleLogRecord(self, record): |
| # if a name is specified, we use the named logger rather than the one |
| # implied by the record. |
| if self.server.logname is not None: |
| name = self.server.logname |
| else: |
| name = record.name |
| logger = logging.getLogger(name) |
| # N.B. EVERY record gets logged. This is because Logger.handle |
| # is normally called AFTER logger-level filtering. If you want |
| # to do filtering, do it at the client end to save wasting |
| # cycles and network bandwidth! |
| logger.handle(record) |
| |
| class LogRecordSocketReceiver(socketserver.ThreadingTCPServer): |
| """ |
| Simple TCP socket-based logging receiver suitable for testing. |
| """ |
| |
| allow_reuse_address = 1 |
| |
| def __init__(self, host='localhost', |
| port=logging.handlers.DEFAULT_TCP_LOGGING_PORT, |
| handler=LogRecordStreamHandler): |
| socketserver.ThreadingTCPServer.__init__(self, (host, port), handler) |
| self.abort = 0 |
| self.timeout = 1 |
| self.logname = None |
| |
| def serve_until_stopped(self): |
| import select |
| abort = 0 |
| while not abort: |
| rd, wr, ex = select.select([self.socket.fileno()], |
| [], [], |
| self.timeout) |
| if rd: |
| self.handle_request() |
| abort = self.abort |
| |
| def main(): |
| logging.basicConfig( |
| format='%(relativeCreated)5d %(name)-15s %(levelname)-8s %(message)s') |
| tcpserver = LogRecordSocketReceiver() |
| print('About to start TCP server...') |
| tcpserver.serve_until_stopped() |
| |
| if __name__ == '__main__': |
| main() |
| |
| First run the server, and then the client. On the client side, nothing is |
| printed on the console; on the server side, you should see something like:: |
| |
| About to start TCP server... |
| 59 root INFO Jackdaws love my big sphinx of quartz. |
| 59 myapp.area1 DEBUG Quick zephyrs blow, vexing daft Jim. |
| 69 myapp.area1 INFO How quickly daft jumping zebras vex. |
| 69 myapp.area2 WARNING Jail zesty vixen who grabbed pay from quack. |
| 69 myapp.area2 ERROR The five boxing wizards jump quickly. |
| |
| Note that there are some security issues with pickle in some scenarios. If |
| these affect you, you can use an alternative serialization scheme by overriding |
| the :meth:`makePickle` method and implementing your alternative there, as |
| well as adapting the above script to use your alternative serialization. |
| |
| |
| .. _context-info: |
| |
| Adding contextual information to your logging output |
| ---------------------------------------------------- |
| |
| Sometimes you want logging output to contain contextual information in |
| addition to the parameters passed to the logging call. For example, in a |
| networked application, it may be desirable to log client-specific information |
| in the log (e.g. remote client's username, or IP address). Although you could |
| use the *extra* parameter to achieve this, it's not always convenient to pass |
| the information in this way. While it might be tempting to create |
| :class:`Logger` instances on a per-connection basis, this is not a good idea |
| because these instances are not garbage collected. While this is not a problem |
| in practice, when the number of :class:`Logger` instances is dependent on the |
| level of granularity you want to use in logging an application, it could |
| be hard to manage if the number of :class:`Logger` instances becomes |
| effectively unbounded. |
| |
| |
| Using LoggerAdapters to impart contextual information |
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ |
| |
| An easy way in which you can pass contextual information to be output along |
| with logging event information is to use the :class:`LoggerAdapter` class. |
| This class is designed to look like a :class:`Logger`, so that you can call |
| :meth:`debug`, :meth:`info`, :meth:`warning`, :meth:`error`, |
| :meth:`exception`, :meth:`critical` and :meth:`log`. These methods have the |
| same signatures as their counterparts in :class:`Logger`, so you can use the |
| two types of instances interchangeably. |
| |
| When you create an instance of :class:`LoggerAdapter`, you pass it a |
| :class:`Logger` instance and a dict-like object which contains your contextual |
| information. When you call one of the logging methods on an instance of |
| :class:`LoggerAdapter`, it delegates the call to the underlying instance of |
| :class:`Logger` passed to its constructor, and arranges to pass the contextual |
| information in the delegated call. Here's a snippet from the code of |
| :class:`LoggerAdapter`:: |
| |
| def debug(self, msg, *args, **kwargs): |
| """ |
| Delegate a debug call to the underlying logger, after adding |
| contextual information from this adapter instance. |
| """ |
| msg, kwargs = self.process(msg, kwargs) |
| self.logger.debug(msg, *args, **kwargs) |
| |
| The :meth:`process` method of :class:`LoggerAdapter` is where the contextual |
| information is added to the logging output. It's passed the message and |
| keyword arguments of the logging call, and it passes back (potentially) |
| modified versions of these to use in the call to the underlying logger. The |
| default implementation of this method leaves the message alone, but inserts |
| an 'extra' key in the keyword argument whose value is the dict-like object |
| passed to the constructor. Of course, if you had passed an 'extra' keyword |
| argument in the call to the adapter, it will be silently overwritten. |
| |
| The advantage of using 'extra' is that the values in the dict-like object are |
| merged into the :class:`LogRecord` instance's __dict__, allowing you to use |
| customized strings with your :class:`Formatter` instances which know about |
| the keys of the dict-like object. If you need a different method, e.g. if you |
| want to prepend or append the contextual information to the message string, |
| you just need to subclass :class:`LoggerAdapter` and override :meth:`process` |
| to do what you need. Here's an example script which uses this class, which |
| also illustrates what dict-like behaviour is needed from an arbitrary |
| 'dict-like' object for use in the constructor:: |
| |
| import logging |
| |
| class ConnInfo: |
| """ |
| An example class which shows how an arbitrary class can be used as |
| the 'extra' context information repository passed to a LoggerAdapter. |
| """ |
| |
| def __getitem__(self, name): |
| """ |
| To allow this instance to look like a dict. |
| """ |
| from random import choice |
| if name == 'ip': |
| result = choice(['127.0.0.1', '192.168.0.1']) |
| elif name == 'user': |
| result = choice(['jim', 'fred', 'sheila']) |
| else: |
| result = self.__dict__.get(name, '?') |
| return result |
| |
| def __iter__(self): |
| """ |
| To allow iteration over keys, which will be merged into |
| the LogRecord dict before formatting and output. |
| """ |
| keys = ['ip', 'user'] |
| keys.extend(self.__dict__.keys()) |
| return keys.__iter__() |
| |
| if __name__ == '__main__': |
| from random import choice |
| levels = (logging.DEBUG, logging.INFO, logging.WARNING, logging.ERROR, logging.CRITICAL) |
| a1 = logging.LoggerAdapter(logging.getLogger('a.b.c'), |
| { 'ip' : '123.231.231.123', 'user' : 'sheila' }) |
| logging.basicConfig(level=logging.DEBUG, |
| format='%(asctime)-15s %(name)-5s %(levelname)-8s IP: %(ip)-15s User: %(user)-8s %(message)s') |
| a1.debug('A debug message') |
| a1.info('An info message with %s', 'some parameters') |
| a2 = logging.LoggerAdapter(logging.getLogger('d.e.f'), ConnInfo()) |
| for x in range(10): |
| lvl = choice(levels) |
| lvlname = logging.getLevelName(lvl) |
| a2.log(lvl, 'A message at %s level with %d %s', lvlname, 2, 'parameters') |
| |
| When this script is run, the output should look something like this:: |
| |
| 2008-01-18 14:49:54,023 a.b.c DEBUG IP: 123.231.231.123 User: sheila A debug message |
| 2008-01-18 14:49:54,023 a.b.c INFO IP: 123.231.231.123 User: sheila An info message with some parameters |
| 2008-01-18 14:49:54,023 d.e.f CRITICAL IP: 192.168.0.1 User: jim A message at CRITICAL level with 2 parameters |
| 2008-01-18 14:49:54,033 d.e.f INFO IP: 192.168.0.1 User: jim A message at INFO level with 2 parameters |
| 2008-01-18 14:49:54,033 d.e.f WARNING IP: 192.168.0.1 User: sheila A message at WARNING level with 2 parameters |
| 2008-01-18 14:49:54,033 d.e.f ERROR IP: 127.0.0.1 User: fred A message at ERROR level with 2 parameters |
| 2008-01-18 14:49:54,033 d.e.f ERROR IP: 127.0.0.1 User: sheila A message at ERROR level with 2 parameters |
| 2008-01-18 14:49:54,033 d.e.f WARNING IP: 192.168.0.1 User: sheila A message at WARNING level with 2 parameters |
| 2008-01-18 14:49:54,033 d.e.f WARNING IP: 192.168.0.1 User: jim A message at WARNING level with 2 parameters |
| 2008-01-18 14:49:54,033 d.e.f INFO IP: 192.168.0.1 User: fred A message at INFO level with 2 parameters |
| 2008-01-18 14:49:54,033 d.e.f WARNING IP: 192.168.0.1 User: sheila A message at WARNING level with 2 parameters |
| 2008-01-18 14:49:54,033 d.e.f WARNING IP: 127.0.0.1 User: jim A message at WARNING level with 2 parameters |
| |
| |
| .. _filters-contextual: |
| |
| Using Filters to impart contextual information |
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ |
| |
| You can also add contextual information to log output using a user-defined |
| :class:`Filter`. ``Filter`` instances are allowed to modify the ``LogRecords`` |
| passed to them, including adding additional attributes which can then be output |
| using a suitable format string, or if needed a custom :class:`Formatter`. |
| |
| For example in a web application, the request being processed (or at least, |
| the interesting parts of it) can be stored in a threadlocal |
| (:class:`threading.local`) variable, and then accessed from a ``Filter`` to |
| add, say, information from the request - say, the remote IP address and remote |
| user's username - to the ``LogRecord``, using the attribute names 'ip' and |
| 'user' as in the ``LoggerAdapter`` example above. In that case, the same format |
| string can be used to get similar output to that shown above. Here's an example |
| script:: |
| |
| import logging |
| from random import choice |
| |
| class ContextFilter(logging.Filter): |
| """ |
| This is a filter which injects contextual information into the log. |
| |
| Rather than use actual contextual information, we just use random |
| data in this demo. |
| """ |
| |
| USERS = ['jim', 'fred', 'sheila'] |
| IPS = ['123.231.231.123', '127.0.0.1', '192.168.0.1'] |
| |
| def filter(self, record): |
| |
| record.ip = choice(ContextFilter.IPS) |
| record.user = choice(ContextFilter.USERS) |
| return True |
| |
| if __name__ == '__main__': |
| levels = (logging.DEBUG, logging.INFO, logging.WARNING, logging.ERROR, logging.CRITICAL) |
| logging.basicConfig(level=logging.DEBUG, |
| format='%(asctime)-15s %(name)-5s %(levelname)-8s IP: %(ip)-15s User: %(user)-8s %(message)s') |
| a1 = logging.getLogger('a.b.c') |
| a2 = logging.getLogger('d.e.f') |
| |
| f = ContextFilter() |
| a1.addFilter(f) |
| a2.addFilter(f) |
| a1.debug('A debug message') |
| a1.info('An info message with %s', 'some parameters') |
| for x in range(10): |
| lvl = choice(levels) |
| lvlname = logging.getLevelName(lvl) |
| a2.log(lvl, 'A message at %s level with %d %s', lvlname, 2, 'parameters') |
| |
| which, when run, produces something like:: |
| |
| 2010-09-06 22:38:15,292 a.b.c DEBUG IP: 123.231.231.123 User: fred A debug message |
| 2010-09-06 22:38:15,300 a.b.c INFO IP: 192.168.0.1 User: sheila An info message with some parameters |
| 2010-09-06 22:38:15,300 d.e.f CRITICAL IP: 127.0.0.1 User: sheila A message at CRITICAL level with 2 parameters |
| 2010-09-06 22:38:15,300 d.e.f ERROR IP: 127.0.0.1 User: jim A message at ERROR level with 2 parameters |
| 2010-09-06 22:38:15,300 d.e.f DEBUG IP: 127.0.0.1 User: sheila A message at DEBUG level with 2 parameters |
| 2010-09-06 22:38:15,300 d.e.f ERROR IP: 123.231.231.123 User: fred A message at ERROR level with 2 parameters |
| 2010-09-06 22:38:15,300 d.e.f CRITICAL IP: 192.168.0.1 User: jim A message at CRITICAL level with 2 parameters |
| 2010-09-06 22:38:15,300 d.e.f CRITICAL IP: 127.0.0.1 User: sheila A message at CRITICAL level with 2 parameters |
| 2010-09-06 22:38:15,300 d.e.f DEBUG IP: 192.168.0.1 User: jim A message at DEBUG level with 2 parameters |
| 2010-09-06 22:38:15,301 d.e.f ERROR IP: 127.0.0.1 User: sheila A message at ERROR level with 2 parameters |
| 2010-09-06 22:38:15,301 d.e.f DEBUG IP: 123.231.231.123 User: fred A message at DEBUG level with 2 parameters |
| 2010-09-06 22:38:15,301 d.e.f INFO IP: 123.231.231.123 User: fred A message at INFO level with 2 parameters |
| |
| |
| .. _multiple-processes: |
| |
| Logging to a single file from multiple processes |
| ------------------------------------------------ |
| |
| Although logging is thread-safe, and logging to a single file from multiple |
| threads in a single process *is* supported, logging to a single file from |
| *multiple processes* is *not* supported, because there is no standard way to |
| serialize access to a single file across multiple processes in Python. If you |
| need to log to a single file from multiple processes, one way of doing this is |
| to have all the processes log to a :class:`SocketHandler`, and have a separate |
| process which implements a socket server which reads from the socket and logs |
| to file. (If you prefer, you can dedicate one thread in one of the existing |
| processes to perform this function.) :ref:`This section <network-logging>` |
| documents this approach in more detail and includes a working socket receiver |
| which can be used as a starting point for you to adapt in your own |
| applications. |
| |
| If you are using a recent version of Python which includes the |
| :mod:`multiprocessing` module, you could write your own handler which uses the |
| :class:`Lock` class from this module to serialize access to the file from |
| your processes. The existing :class:`FileHandler` and subclasses do not make |
| use of :mod:`multiprocessing` at present, though they may do so in the future. |
| Note that at present, the :mod:`multiprocessing` module does not provide |
| working lock functionality on all platforms (see |
| http://bugs.python.org/issue3770). |
| |
| .. currentmodule:: logging.handlers |
| |
| Alternatively, you can use a ``Queue`` and a :class:`QueueHandler` to send |
| all logging events to one of the processes in your multi-process application. |
| The following example script demonstrates how you can do this; in the example |
| a separate listener process listens for events sent by other processes and logs |
| them according to its own logging configuration. Although the example only |
| demonstrates one way of doing it (for example, you may want to use a listener |
| thread rather than a separate listener process -- the implementation would be |
| analogous) it does allow for completely different logging configurations for |
| the listener and the other processes in your application, and can be used as |
| the basis for code meeting your own specific requirements:: |
| |
| # You'll need these imports in your own code |
| import logging |
| import logging.handlers |
| import multiprocessing |
| |
| # Next two import lines for this demo only |
| from random import choice, random |
| import time |
| |
| # |
| # Because you'll want to define the logging configurations for listener and workers, the |
| # listener and worker process functions take a configurer parameter which is a callable |
| # for configuring logging for that process. These functions are also passed the queue, |
| # which they use for communication. |
| # |
| # In practice, you can configure the listener however you want, but note that in this |
| # simple example, the listener does not apply level or filter logic to received records. |
| # In practice, you would probably want to do this logic in the worker processes, to avoid |
| # sending events which would be filtered out between processes. |
| # |
| # The size of the rotated files is made small so you can see the results easily. |
| def listener_configurer(): |
| root = logging.getLogger() |
| h = logging.handlers.RotatingFileHandler('mptest.log', 'a', 300, 10) |
| f = logging.Formatter('%(asctime)s %(processName)-10s %(name)s %(levelname)-8s %(message)s') |
| h.setFormatter(f) |
| root.addHandler(h) |
| |
| # This is the listener process top-level loop: wait for logging events |
| # (LogRecords)on the queue and handle them, quit when you get a None for a |
| # LogRecord. |
| def listener_process(queue, configurer): |
| configurer() |
| while True: |
| try: |
| record = queue.get() |
| if record is None: # We send this as a sentinel to tell the listener to quit. |
| break |
| logger = logging.getLogger(record.name) |
| logger.handle(record) # No level or filter logic applied - just do it! |
| except (KeyboardInterrupt, SystemExit): |
| raise |
| except: |
| import sys, traceback |
| print('Whoops! Problem:', file=sys.stderr) |
| traceback.print_exc(file=sys.stderr) |
| |
| # Arrays used for random selections in this demo |
| |
| LEVELS = [logging.DEBUG, logging.INFO, logging.WARNING, |
| logging.ERROR, logging.CRITICAL] |
| |
| LOGGERS = ['a.b.c', 'd.e.f'] |
| |
| MESSAGES = [ |
| 'Random message #1', |
| 'Random message #2', |
| 'Random message #3', |
| ] |
| |
| # The worker configuration is done at the start of the worker process run. |
| # Note that on Windows you can't rely on fork semantics, so each process |
| # will run the logging configuration code when it starts. |
| def worker_configurer(queue): |
| h = logging.handlers.QueueHandler(queue) # Just the one handler needed |
| root = logging.getLogger() |
| root.addHandler(h) |
| root.setLevel(logging.DEBUG) # send all messages, for demo; no other level or filter logic applied. |
| |
| # This is the worker process top-level loop, which just logs ten events with |
| # random intervening delays before terminating. |
| # The print messages are just so you know it's doing something! |
| def worker_process(queue, configurer): |
| configurer(queue) |
| name = multiprocessing.current_process().name |
| print('Worker started: %s' % name) |
| for i in range(10): |
| time.sleep(random()) |
| logger = logging.getLogger(choice(LOGGERS)) |
| level = choice(LEVELS) |
| message = choice(MESSAGES) |
| logger.log(level, message) |
| print('Worker finished: %s' % name) |
| |
| # Here's where the demo gets orchestrated. Create the queue, create and start |
| # the listener, create ten workers and start them, wait for them to finish, |
| # then send a None to the queue to tell the listener to finish. |
| def main(): |
| queue = multiprocessing.Queue(-1) |
| listener = multiprocessing.Process(target=listener_process, |
| args=(queue, listener_configurer)) |
| listener.start() |
| workers = [] |
| for i in range(10): |
| worker = multiprocessing.Process(target=worker_process, |
| args=(queue, worker_configurer)) |
| workers.append(worker) |
| worker.start() |
| for w in workers: |
| w.join() |
| queue.put_nowait(None) |
| listener.join() |
| |
| if __name__ == '__main__': |
| main() |
| |
| A variant of the above script keeps the logging in the main process, in a |
| separate thread:: |
| |
| import logging |
| import logging.config |
| import logging.handlers |
| from multiprocessing import Process, Queue |
| import random |
| import threading |
| import time |
| |
| def logger_thread(q): |
| while True: |
| record = q.get() |
| if record is None: |
| break |
| logger = logging.getLogger(record.name) |
| logger.handle(record) |
| |
| |
| def worker_process(q): |
| qh = logging.handlers.QueueHandler(q) |
| root = logging.getLogger() |
| root.setLevel(logging.DEBUG) |
| root.addHandler(qh) |
| levels = [logging.DEBUG, logging.INFO, logging.WARNING, logging.ERROR, |
| logging.CRITICAL] |
| loggers = ['foo', 'foo.bar', 'foo.bar.baz', |
| 'spam', 'spam.ham', 'spam.ham.eggs'] |
| for i in range(100): |
| lvl = random.choice(levels) |
| logger = logging.getLogger(random.choice(loggers)) |
| logger.log(lvl, 'Message no. %d', i) |
| |
| if __name__ == '__main__': |
| q = Queue() |
| d = { |
| 'version': 1, |
| 'formatters': { |
| 'detailed': { |
| 'class': 'logging.Formatter', |
| 'format': '%(asctime)s %(name)-15s %(levelname)-8s %(processName)-10s %(message)s' |
| } |
| }, |
| 'handlers': { |
| 'console': { |
| 'class': 'logging.StreamHandler', |
| 'level': 'INFO', |
| }, |
| 'file': { |
| 'class': 'logging.FileHandler', |
| 'filename': 'mplog.log', |
| 'mode': 'w', |
| 'formatter': 'detailed', |
| }, |
| 'foofile': { |
| 'class': 'logging.FileHandler', |
| 'filename': 'mplog-foo.log', |
| 'mode': 'w', |
| 'formatter': 'detailed', |
| }, |
| 'errors': { |
| 'class': 'logging.FileHandler', |
| 'filename': 'mplog-errors.log', |
| 'mode': 'w', |
| 'level': 'ERROR', |
| 'formatter': 'detailed', |
| }, |
| }, |
| 'loggers': { |
| 'foo': { |
| 'handlers' : ['foofile'] |
| } |
| }, |
| 'root': { |
| 'level': 'DEBUG', |
| 'handlers': ['console', 'file', 'errors'] |
| }, |
| } |
| workers = [] |
| for i in range(5): |
| wp = Process(target=worker_process, name='worker %d' % (i + 1), args=(q,)) |
| workers.append(wp) |
| wp.start() |
| logging.config.dictConfig(d) |
| lp = threading.Thread(target=logger_thread, args=(q,)) |
| lp.start() |
| # At this point, the main process could do some useful work of its own |
| # Once it's done that, it can wait for the workers to terminate... |
| for wp in workers: |
| wp.join() |
| # And now tell the logging thread to finish up, too |
| q.put(None) |
| lp.join() |
| |
| This variant shows how you can e.g. apply configuration for particular loggers |
| - e.g. the ``foo`` logger has a special handler which stores all events in the |
| ``foo`` subsystem in a file ``mplog-foo.log``. This will be used by the logging |
| machinery in the main process (even though the logging events are generated in |
| the worker processes) to direct the messages to the appropriate destinations. |
| |
| Using file rotation |
| ------------------- |
| |
| .. sectionauthor:: Doug Hellmann, Vinay Sajip (changes) |
| .. (see <http://blog.doughellmann.com/2007/05/pymotw-logging.html>) |
| |
| Sometimes you want to let a log file grow to a certain size, then open a new |
| file and log to that. You may want to keep a certain number of these files, and |
| when that many files have been created, rotate the files so that the number of |
| files and the size of the files both remain bounded. For this usage pattern, the |
| logging package provides a :class:`RotatingFileHandler`:: |
| |
| import glob |
| import logging |
| import logging.handlers |
| |
| LOG_FILENAME = 'logging_rotatingfile_example.out' |
| |
| # Set up a specific logger with our desired output level |
| my_logger = logging.getLogger('MyLogger') |
| my_logger.setLevel(logging.DEBUG) |
| |
| # Add the log message handler to the logger |
| handler = logging.handlers.RotatingFileHandler( |
| LOG_FILENAME, maxBytes=20, backupCount=5) |
| |
| my_logger.addHandler(handler) |
| |
| # Log some messages |
| for i in range(20): |
| my_logger.debug('i = %d' % i) |
| |
| # See what files are created |
| logfiles = glob.glob('%s*' % LOG_FILENAME) |
| |
| for filename in logfiles: |
| print(filename) |
| |
| The result should be 6 separate files, each with part of the log history for the |
| application:: |
| |
| logging_rotatingfile_example.out |
| logging_rotatingfile_example.out.1 |
| logging_rotatingfile_example.out.2 |
| logging_rotatingfile_example.out.3 |
| logging_rotatingfile_example.out.4 |
| logging_rotatingfile_example.out.5 |
| |
| The most current file is always :file:`logging_rotatingfile_example.out`, |
| and each time it reaches the size limit it is renamed with the suffix |
| ``.1``. Each of the existing backup files is renamed to increment the suffix |
| (``.1`` becomes ``.2``, etc.) and the ``.6`` file is erased. |
| |
| Obviously this example sets the log length much too small as an extreme |
| example. You would want to set *maxBytes* to an appropriate value. |
| |
| .. _format-styles: |
| |
| Use of alternative formatting styles |
| ------------------------------------ |
| |
| When logging was added to the Python standard library, the only way of |
| formatting messages with variable content was to use the %-formatting |
| method. Since then, Python has gained two new formatting approaches: |
| :class:`string.Template` (added in Python 2.4) and :meth:`str.format` |
| (added in Python 2.6). |
| |
| Logging (as of 3.2) provides improved support for these two additional |
| formatting styles. The :class:`Formatter` class been enhanced to take an |
| additional, optional keyword parameter named ``style``. This defaults to |
| ``'%'``, but other possible values are ``'{'`` and ``'$'``, which correspond |
| to the other two formatting styles. Backwards compatibility is maintained by |
| default (as you would expect), but by explicitly specifying a style parameter, |
| you get the ability to specify format strings which work with |
| :meth:`str.format` or :class:`string.Template`. Here's an example console |
| session to show the possibilities: |
| |
| .. code-block:: pycon |
| |
| >>> import logging |
| >>> root = logging.getLogger() |
| >>> root.setLevel(logging.DEBUG) |
| >>> handler = logging.StreamHandler() |
| >>> bf = logging.Formatter('{asctime} {name} {levelname:8s} {message}', |
| ... style='{') |
| >>> handler.setFormatter(bf) |
| >>> root.addHandler(handler) |
| >>> logger = logging.getLogger('foo.bar') |
| >>> logger.debug('This is a DEBUG message') |
| 2010-10-28 15:11:55,341 foo.bar DEBUG This is a DEBUG message |
| >>> logger.critical('This is a CRITICAL message') |
| 2010-10-28 15:12:11,526 foo.bar CRITICAL This is a CRITICAL message |
| >>> df = logging.Formatter('$asctime $name ${levelname} $message', |
| ... style='$') |
| >>> handler.setFormatter(df) |
| >>> logger.debug('This is a DEBUG message') |
| 2010-10-28 15:13:06,924 foo.bar DEBUG This is a DEBUG message |
| >>> logger.critical('This is a CRITICAL message') |
| 2010-10-28 15:13:11,494 foo.bar CRITICAL This is a CRITICAL message |
| >>> |
| |
| Note that the formatting of logging messages for final output to logs is |
| completely independent of how an individual logging message is constructed. |
| That can still use %-formatting, as shown here:: |
| |
| >>> logger.error('This is an%s %s %s', 'other,', 'ERROR,', 'message') |
| 2010-10-28 15:19:29,833 foo.bar ERROR This is another, ERROR, message |
| >>> |
| |
| Logging calls (``logger.debug()``, ``logger.info()`` etc.) only take |
| positional parameters for the actual logging message itself, with keyword |
| parameters used only for determining options for how to handle the actual |
| logging call (e.g. the ``exc_info`` keyword parameter to indicate that |
| traceback information should be logged, or the ``extra`` keyword parameter |
| to indicate additional contextual information to be added to the log). So |
| you cannot directly make logging calls using :meth:`str.format` or |
| :class:`string.Template` syntax, because internally the logging package |
| uses %-formatting to merge the format string and the variable arguments. |
| There would no changing this while preserving backward compatibility, since |
| all logging calls which are out there in existing code will be using %-format |
| strings. |
| |
| There is, however, a way that you can use {}- and $- formatting to construct |
| your individual log messages. Recall that for a message you can use an |
| arbitrary object as a message format string, and that the logging package will |
| call ``str()`` on that object to get the actual format string. Consider the |
| following two classes:: |
| |
| class BraceMessage(object): |
| def __init__(self, fmt, *args, **kwargs): |
| self.fmt = fmt |
| self.args = args |
| self.kwargs = kwargs |
| |
| def __str__(self): |
| return self.fmt.format(*self.args, **self.kwargs) |
| |
| class DollarMessage(object): |
| def __init__(self, fmt, **kwargs): |
| self.fmt = fmt |
| self.kwargs = kwargs |
| |
| def __str__(self): |
| from string import Template |
| return Template(self.fmt).substitute(**self.kwargs) |
| |
| Either of these can be used in place of a format string, to allow {}- or |
| $-formatting to be used to build the actual "message" part which appears in the |
| formatted log output in place of "%(message)s" or "{message}" or "$message". |
| It's a little unwieldy to use the class names whenever you want to log |
| something, but it's quite palatable if you use an alias such as __ (double |
| underscore – not to be confused with _, the single underscore used as a |
| synonym/alias for :func:`gettext.gettext` or its brethren). |
| |
| The above classes are not included in Python, though they're easy enough to |
| copy and paste into your own code. They can be used as follows (assuming that |
| they're declared in a module called ``wherever``): |
| |
| .. code-block:: pycon |
| |
| >>> from wherever import BraceMessage as __ |
| >>> print(__('Message with {0} {name}', 2, name='placeholders')) |
| Message with 2 placeholders |
| >>> class Point: pass |
| ... |
| >>> p = Point() |
| >>> p.x = 0.5 |
| >>> p.y = 0.5 |
| >>> print(__('Message with coordinates: ({point.x:.2f}, {point.y:.2f})', |
| ... point=p)) |
| Message with coordinates: (0.50, 0.50) |
| >>> from wherever import DollarMessage as __ |
| >>> print(__('Message with $num $what', num=2, what='placeholders')) |
| Message with 2 placeholders |
| >>> |
| |
| While the above examples use ``print()`` to show how the formatting works, you |
| would of course use ``logger.debug()`` or similar to actually log using this |
| approach. |
| |
| One thing to note is that you pay no significant performance penalty with this |
| approach: the actual formatting happens not when you make the logging call, but |
| when (and if) the logged message is actually about to be output to a log by a |
| handler. So the only slightly unusual thing which might trip you up is that the |
| parentheses go around the format string and the arguments, not just the format |
| string. That's because the __ notation is just syntax sugar for a constructor |
| call to one of the XXXMessage classes. |
| |
| |
| .. currentmodule:: logging |
| |
| .. _custom-logrecord: |
| |
| Customising ``LogRecord`` |
| ------------------------- |
| |
| Every logging event is represented by a :class:`LogRecord` instance. |
| When an event is logged and not filtered out by a logger's level, a |
| :class:`LogRecord` is created, populated with information about the event and |
| then passed to the handlers for that logger (and its ancestors, up to and |
| including the logger where further propagation up the hierarchy is disabled). |
| Before Python 3.2, there were only two places where this creation was done: |
| |
| * :meth:`Logger.makeRecord`, which is called in the normal process of |
| logging an event. This invoked :class:`LogRecord` directly to create an |
| instance. |
| * :func:`makeLogRecord`, which is called with a dictionary containing |
| attributes to be added to the LogRecord. This is typically invoked when a |
| suitable dictionary has been received over the network (e.g. in pickle form |
| via a :class:`~handlers.SocketHandler`, or in JSON form via an |
| :class:`~handlers.HTTPHandler`). |
| |
| This has usually meant that if you need to do anything special with a |
| :class:`LogRecord`, you've had to do one of the following. |
| |
| * Create your own :class:`Logger` subclass, which overrides |
| :meth:`Logger.makeRecord`, and set it using :func:`~logging.setLoggerClass` |
| before any loggers that you care about are instantiated. |
| * Add a :class:`Filter` to a logger or handler, which does the |
| necessary special manipulation you need when its |
| :meth:`~Filter.filter` method is called. |
| |
| The first approach would be a little unwieldy in the scenario where (say) |
| several different libraries wanted to do different things. Each would attempt |
| to set its own :class:`Logger` subclass, and the one which did this last would |
| win. |
| |
| The second approach works reasonably well for many cases, but does not allow |
| you to e.g. use a specialized subclass of :class:`LogRecord`. Library |
| developers can set a suitable filter on their loggers, but they would have to |
| remember to do this every time they introduced a new logger (which they would |
| do simply by adding new packages or modules and doing :: |
| |
| logger = logging.getLogger(__name__) |
| |
| at module level). It's probably one too many things to think about. Developers |
| could also add the filter to a :class:`~logging.NullHandler` attached to their |
| top-level logger, but this would not be invoked if an application developer |
| attached a handler to a lower-level library logger – so output from that |
| handler would not reflect the intentions of the library developer. |
| |
| In Python 3.2 and later, :class:`~logging.LogRecord` creation is done through a |
| factory, which you can specify. The factory is just a callable you can set with |
| :func:`~logging.setLogRecordFactory`, and interrogate with |
| :func:`~logging.getLogRecordFactory`. The factory is invoked with the same |
| signature as the :class:`~logging.LogRecord` constructor, as :class:`LogRecord` |
| is the default setting for the factory. |
| |
| This approach allows a custom factory to control all aspects of LogRecord |
| creation. For example, you could return a subclass, or just add some additional |
| attributes to the record once created, using a pattern similar to this:: |
| |
| old_factory = logging.getLogRecordFactory() |
| |
| def record_factory(*args, **kwargs): |
| record = old_factory(*args, **kwargs) |
| record.custom_attribute = 0xdecafbad |
| return record |
| |
| logging.setLogRecordFactory(record_factory) |
| |
| This pattern allows different libraries to chain factories together, and as |
| long as they don't overwrite each other's attributes or unintentionally |
| overwrite the attributes provided as standard, there should be no surprises. |
| However, it should be borne in mind that each link in the chain adds run-time |
| overhead to all logging operations, and the technique should only be used when |
| the use of a :class:`Filter` does not provide the desired result. |
| |
| |
| .. _zeromq-handlers: |
| |
| Subclassing QueueHandler - a ZeroMQ example |
| ------------------------------------------- |
| |
| You can use a :class:`QueueHandler` subclass to send messages to other kinds |
| of queues, for example a ZeroMQ 'publish' socket. In the example below,the |
| socket is created separately and passed to the handler (as its 'queue'):: |
| |
| import zmq # using pyzmq, the Python binding for ZeroMQ |
| import json # for serializing records portably |
| |
| ctx = zmq.Context() |
| sock = zmq.Socket(ctx, zmq.PUB) # or zmq.PUSH, or other suitable value |
| sock.bind('tcp://*:5556') # or wherever |
| |
| class ZeroMQSocketHandler(QueueHandler): |
| def enqueue(self, record): |
| data = json.dumps(record.__dict__) |
| self.queue.send(data) |
| |
| handler = ZeroMQSocketHandler(sock) |
| |
| |
| Of course there are other ways of organizing this, for example passing in the |
| data needed by the handler to create the socket:: |
| |
| class ZeroMQSocketHandler(QueueHandler): |
| def __init__(self, uri, socktype=zmq.PUB, ctx=None): |
| self.ctx = ctx or zmq.Context() |
| socket = zmq.Socket(self.ctx, socktype) |
| socket.bind(uri) |
| QueueHandler.__init__(self, socket) |
| |
| def enqueue(self, record): |
| data = json.dumps(record.__dict__) |
| self.queue.send(data) |
| |
| def close(self): |
| self.queue.close() |
| |
| |
| Subclassing QueueListener - a ZeroMQ example |
| -------------------------------------------- |
| |
| You can also subclass :class:`QueueListener` to get messages from other kinds |
| of queues, for example a ZeroMQ 'subscribe' socket. Here's an example:: |
| |
| class ZeroMQSocketListener(QueueListener): |
| def __init__(self, uri, *handlers, **kwargs): |
| self.ctx = kwargs.get('ctx') or zmq.Context() |
| socket = zmq.Socket(self.ctx, zmq.SUB) |
| socket.setsockopt(zmq.SUBSCRIBE, '') # subscribe to everything |
| socket.connect(uri) |
| |
| def dequeue(self): |
| msg = self.queue.recv() |
| return logging.makeLogRecord(json.loads(msg)) |
| |
| |
| .. seealso:: |
| |
| Module :mod:`logging` |
| API reference for the logging module. |
| |
| Module :mod:`logging.config` |
| Configuration API for the logging module. |
| |
| Module :mod:`logging.handlers` |
| Useful handlers included with the logging module. |
| |
| :ref:`A basic logging tutorial <logging-basic-tutorial>` |
| |
| :ref:`A more advanced logging tutorial <logging-advanced-tutorial>` |
| |
| |
| An example dictionary-based configuration |
| ----------------------------------------- |
| |
| Below is an example of a logging configuration dictionary - it's taken from |
| the `documentation on the Django project <https://docs.djangoproject.com/en/1.3/topics/logging/#configuring-logging>`_. |
| This dictionary is passed to :func:`~logging.config.dictConfig` to put the configuration into effect:: |
| |
| LOGGING = { |
| 'version': 1, |
| 'disable_existing_loggers': True, |
| 'formatters': { |
| 'verbose': { |
| 'format': '%(levelname)s %(asctime)s %(module)s %(process)d %(thread)d %(message)s' |
| }, |
| 'simple': { |
| 'format': '%(levelname)s %(message)s' |
| }, |
| }, |
| 'filters': { |
| 'special': { |
| '()': 'project.logging.SpecialFilter', |
| 'foo': 'bar', |
| } |
| }, |
| 'handlers': { |
| 'null': { |
| 'level':'DEBUG', |
| 'class':'django.utils.log.NullHandler', |
| }, |
| 'console':{ |
| 'level':'DEBUG', |
| 'class':'logging.StreamHandler', |
| 'formatter': 'simple' |
| }, |
| 'mail_admins': { |
| 'level': 'ERROR', |
| 'class': 'django.utils.log.AdminEmailHandler', |
| 'filters': ['special'] |
| } |
| }, |
| 'loggers': { |
| 'django': { |
| 'handlers':['null'], |
| 'propagate': True, |
| 'level':'INFO', |
| }, |
| 'django.request': { |
| 'handlers': ['mail_admins'], |
| 'level': 'ERROR', |
| 'propagate': False, |
| }, |
| 'myproject.custom': { |
| 'handlers': ['console', 'mail_admins'], |
| 'level': 'INFO', |
| 'filters': ['special'] |
| } |
| } |
| } |
| |
| For more information about this configuration, you can see the `relevant |
| section <https://docs.djangoproject.com/en/1.3/topics/logging/#configuring-logging>`_ |
| of the Django documentation. |
| |
| A more elaborate multiprocessing example |
| ---------------------------------------- |
| |
| The following working example shows how logging can be used with multiprocessing |
| using configuration files. The configurations are fairly simple, but serve to |
| illustrate how more complex ones could be implemented in a real multiprocessing |
| scenario. |
| |
| In the example, the main process spawns a listener process and some worker |
| processes. Each of the main process, the listener and the workers have three |
| separate configurations (the workers all share the same configuration). We can |
| see logging in the main process, how the workers log to a QueueHandler and how |
| the listener implements a QueueListener and a more complex logging |
| configuration, and arranges to dispatch events received via the queue to the |
| handlers specified in the configuration. Note that these configurations are |
| purely illustrative, but you should be able to adapt this example to your own |
| scenario. |
| |
| Here's the script - the docstrings and the comments hopefully explain how it |
| works:: |
| |
| import logging |
| import logging.config |
| import logging.handlers |
| from multiprocessing import Process, Queue, Event, current_process |
| import os |
| import random |
| import time |
| |
| class MyHandler(object): |
| """ |
| A simple handler for logging events. It runs in the listener process and |
| dispatches events to loggers based on the name in the received record, |
| which then get dispatched, by the logging system, to the handlers |
| configured for those loggers. |
| """ |
| def handle(self, record): |
| logger = logging.getLogger(record.name) |
| # The process name is transformed just to show that it's the listener |
| # doing the logging to files and console |
| record.processName = '%s (for %s)' % (current_process().name, record.processName) |
| logger.handle(record) |
| |
| def listener_process(q, stop_event, config): |
| """ |
| This could be done in the main process, but is just done in a separate |
| process for illustrative purposes. |
| |
| This initialises logging according to the specified configuration, |
| starts the listener and waits for the main process to signal completion |
| via the event. The listener is then stopped, and the process exits. |
| """ |
| logging.config.dictConfig(config) |
| listener = logging.handlers.QueueListener(q, MyHandler()) |
| listener.start() |
| if os.name == 'posix': |
| # On POSIX, the setup logger will have been configured in the |
| # parent process, but should have been disabled following the |
| # dictConfig call. |
| # On Windows, since fork isn't used, the setup logger won't |
| # exist in the child, so it would be created and the message |
| # would appear - hence the "if posix" clause. |
| logger = logging.getLogger('setup') |
| logger.critical('Should not appear, because of disabled logger ...') |
| stop_event.wait() |
| listener.stop() |
| |
| def worker_process(config): |
| """ |
| A number of these are spawned for the purpose of illustration. In |
| practice, they could be a heterogenous bunch of processes rather than |
| ones which are identical to each other. |
| |
| This initialises logging according to the specified configuration, |
| and logs a hundred messages with random levels to randomly selected |
| loggers. |
| |
| A small sleep is added to allow other processes a chance to run. This |
| is not strictly needed, but it mixes the output from the different |
| processes a bit more than if it's left out. |
| """ |
| logging.config.dictConfig(config) |
| levels = [logging.DEBUG, logging.INFO, logging.WARNING, logging.ERROR, |
| logging.CRITICAL] |
| loggers = ['foo', 'foo.bar', 'foo.bar.baz', |
| 'spam', 'spam.ham', 'spam.ham.eggs'] |
| if os.name == 'posix': |
| # On POSIX, the setup logger will have been configured in the |
| # parent process, but should have been disabled following the |
| # dictConfig call. |
| # On Windows, since fork isn't used, the setup logger won't |
| # exist in the child, so it would be created and the message |
| # would appear - hence the "if posix" clause. |
| logger = logging.getLogger('setup') |
| logger.critical('Should not appear, because of disabled logger ...') |
| for i in range(100): |
| lvl = random.choice(levels) |
| logger = logging.getLogger(random.choice(loggers)) |
| logger.log(lvl, 'Message no. %d', i) |
| time.sleep(0.01) |
| |
| def main(): |
| q = Queue() |
| # The main process gets a simple configuration which prints to the console. |
| config_initial = { |
| 'version': 1, |
| 'formatters': { |
| 'detailed': { |
| 'class': 'logging.Formatter', |
| 'format': '%(asctime)s %(name)-15s %(levelname)-8s %(processName)-10s %(message)s' |
| } |
| }, |
| 'handlers': { |
| 'console': { |
| 'class': 'logging.StreamHandler', |
| 'level': 'INFO', |
| }, |
| }, |
| 'root': { |
| 'level': 'DEBUG', |
| 'handlers': ['console'] |
| }, |
| } |
| # The worker process configuration is just a QueueHandler attached to the |
| # root logger, which allows all messages to be sent to the queue. |
| # We disable existing loggers to disable the "setup" logger used in the |
| # parent process. This is needed on POSIX because the logger will |
| # be there in the child following a fork(). |
| config_worker = { |
| 'version': 1, |
| 'disable_existing_loggers': True, |
| 'handlers': { |
| 'queue': { |
| 'class': 'logging.handlers.QueueHandler', |
| 'queue': q, |
| }, |
| }, |
| 'root': { |
| 'level': 'DEBUG', |
| 'handlers': ['queue'] |
| }, |
| } |
| # The listener process configuration shows that the full flexibility of |
| # logging configuration is available to dispatch events to handlers however |
| # you want. |
| # We disable existing loggers to disable the "setup" logger used in the |
| # parent process. This is needed on POSIX because the logger will |
| # be there in the child following a fork(). |
| config_listener = { |
| 'version': 1, |
| 'disable_existing_loggers': True, |
| 'formatters': { |
| 'detailed': { |
| 'class': 'logging.Formatter', |
| 'format': '%(asctime)s %(name)-15s %(levelname)-8s %(processName)-10s %(message)s' |
| }, |
| 'simple': { |
| 'class': 'logging.Formatter', |
| 'format': '%(name)-15s %(levelname)-8s %(processName)-10s %(message)s' |
| } |
| }, |
| 'handlers': { |
| 'console': { |
| 'class': 'logging.StreamHandler', |
| 'level': 'INFO', |
| 'formatter': 'simple', |
| }, |
| 'file': { |
| 'class': 'logging.FileHandler', |
| 'filename': 'mplog.log', |
| 'mode': 'w', |
| 'formatter': 'detailed', |
| }, |
| 'foofile': { |
| 'class': 'logging.FileHandler', |
| 'filename': 'mplog-foo.log', |
| 'mode': 'w', |
| 'formatter': 'detailed', |
| }, |
| 'errors': { |
| 'class': 'logging.FileHandler', |
| 'filename': 'mplog-errors.log', |
| 'mode': 'w', |
| 'level': 'ERROR', |
| 'formatter': 'detailed', |
| }, |
| }, |
| 'loggers': { |
| 'foo': { |
| 'handlers' : ['foofile'] |
| } |
| }, |
| 'root': { |
| 'level': 'DEBUG', |
| 'handlers': ['console', 'file', 'errors'] |
| }, |
| } |
| # Log some initial events, just to show that logging in the parent works |
| # normally. |
| logging.config.dictConfig(config_initial) |
| logger = logging.getLogger('setup') |
| logger.info('About to create workers ...') |
| workers = [] |
| for i in range(5): |
| wp = Process(target=worker_process, name='worker %d' % (i + 1), |
| args=(config_worker,)) |
| workers.append(wp) |
| wp.start() |
| logger.info('Started worker: %s', wp.name) |
| logger.info('About to create listener ...') |
| stop_event = Event() |
| lp = Process(target=listener_process, name='listener', |
| args=(q, stop_event, config_listener)) |
| lp.start() |
| logger.info('Started listener') |
| # We now hang around for the workers to finish their work. |
| for wp in workers: |
| wp.join() |
| # Workers all done, listening can now stop. |
| # Logging in the parent still works normally. |
| logger.info('Telling listener to stop ...') |
| stop_event.set() |
| lp.join() |
| logger.info('All done.') |
| |
| if __name__ == '__main__': |
| main() |
| |
| |
| Inserting a BOM into messages sent to a SysLogHandler |
| ----------------------------------------------------- |
| |
| `RFC 5424 <http://tools.ietf.org/html/rfc5424>`_ requires that a |
| Unicode message be sent to a syslog daemon as a set of bytes which have the |
| following structure: an optional pure-ASCII component, followed by a UTF-8 Byte |
| Order Mark (BOM), followed by Unicode encoded using UTF-8. (See the `relevant |
| section of the specification <http://tools.ietf.org/html/rfc5424#section-6>`_.) |
| |
| In Python 2.6 and 2.7, code was added to |
| :class:`~logging.handlers.SysLogHandler` to insert a BOM into the message, but |
| unfortunately, it was implemented incorrectly, with the BOM appearing at the |
| beginning of the message and hence not allowing any pure-ASCII component to |
| appear before it. |
| |
| As this behaviour is broken, the incorrect BOM insertion code is being removed |
| from Python 2.7.4 and later. However, it is not being replaced, and if you |
| want to produce RFC 5424-compliant messages which includes a BOM, an optional |
| pure-ASCII sequence before it and arbitrary Unicode after it, encoded using |
| UTF-8, then you need to do the following: |
| |
| #. Attach a :class:`~logging.Formatter` instance to your |
| :class:`~logging.handlers.SysLogHandler` instance, with a format string |
| such as:: |
| |
| 'ASCII section\ufeffUnicode section' |
| |
| The Unicode code point ``'\feff```, when encoded using UTF-8, will be |
| encoded as a UTF-8 BOM -- the byte-string ``b'\xef\xbb\xbf'``. |
| |
| #. Replace the ASCII section with whatever placeholders you like, but make sure |
| that the data that appears in there after substitution is always ASCII (that |
| way, it will remain unchanged after UTF-8 encoding). |
| |
| #. Replace the Unicode section with whatever placeholders you like; if the data |
| which appears there after substitution is Unicode, that's fine -- it will be |
| encoded using UTF-8. |
| |
| The formatted message *will* be encoded using UTF-8 encoding by |
| ``SysLogHandler``. If you follow the above rules, you should be able to produce |
| RFC 5424-compliant messages. If you don't, logging may not complain, but your |
| messages will not be RFC 5424-compliant, and your syslog daemon may complain. |
| |