| """Helper class to quickly write a loop over all standard input files. |
| |
| Typical use is: |
| |
| import fileinput |
| for line in fileinput.input(): |
| process(line) |
| |
| This iterates over the lines of all files listed in sys.argv[1:], |
| defaulting to sys.stdin if the list is empty. If a filename is '-' it |
| is also replaced by sys.stdin. To specify an alternative list of |
| filenames, pass it as the argument to input(). A single file name is |
| also allowed. |
| |
| Functions filename(), lineno() return the filename and cumulative line |
| number of the line that has just been read; filelineno() returns its |
| line number in the current file; isfirstline() returns true iff the |
| line just read is the first line of its file; isstdin() returns true |
| iff the line was read from sys.stdin. Function nextfile() closes the |
| current file so that the next iteration will read the first line from |
| the next file (if any); lines not read from the file will not count |
| towards the cumulative line count; the filename is not changed until |
| after the first line of the next file has been read. Function close() |
| closes the sequence. |
| |
| Before any lines have been read, filename() returns None and both line |
| numbers are zero; nextfile() has no effect. After all lines have been |
| read, filename() and the line number functions return the values |
| pertaining to the last line read; nextfile() has no effect. |
| |
| All files are opened in text mode. If an I/O error occurs during |
| opening or reading a file, the IOError exception is raised. |
| |
| If sys.stdin is used more than once, the second and further use will |
| return no lines, except perhaps for interactive use, or if it has been |
| explicitly reset (e.g. using sys.stdin.seek(0)). |
| |
| Empty files are opened and immediately closed; the only time their |
| presence in the list of filenames is noticeable at all is when the |
| last file opened is empty. |
| |
| It is possible that the last line of a file doesn't end in a newline |
| character; otherwise lines are returned including the trailing |
| newline. |
| |
| Class FileInput is the implementation; its methods filename(), |
| lineno(), fileline(), isfirstline(), isstdin(), nextfile() and close() |
| correspond to the functions in the module. In addition it has a |
| readline() method which returns the next input line, and a |
| __getitem__() method which implements the sequence behavior. The |
| sequence must be accessed in strictly sequential order; sequence |
| access and readline() cannot be mixed. |
| |
| Optional in-place filtering: if the keyword argument inplace=1 is |
| passed to input() or to the FileInput constructor, the file is moved |
| to a backup file and standard output is directed to the input file. |
| This makes it possible to write a filter that rewrites its input file |
| in place. If the keyword argument backup=".<some extension>" is also |
| given, it specifies the extension for the backup file, and the backup |
| file remains around; by default, the extension is ".bak" and it is |
| deleted when the output file is closed. In-place filtering is |
| disabled when standard input is read. XXX The current implementation |
| does not work for MS-DOS 8+3 filesystems. |
| |
| Performance: this module is unfortunately one of the slower ways of |
| processing large numbers of input lines. Nevertheless, a significant |
| speed-up has been obtained by using readlines(bufsize) instead of |
| readline(). A new keyword argument, bufsize=N, is present on the |
| input() function and the FileInput() class to override the default |
| buffer size. |
| |
| XXX Possible additions: |
| |
| - optional getopt argument processing |
| - specify open mode ('r' or 'rb') |
| - fileno() |
| - isatty() |
| - read(), read(size), even readlines() |
| |
| """ |
| |
| import sys, os, stat |
| |
| __all__ = ["input","close","nextfile","filename","lineno","filelineno", |
| "isfirstline","isstdin","FileInput"] |
| |
| _state = None |
| |
| DEFAULT_BUFSIZE = 8*1024 |
| |
| def input(files=None, inplace=0, backup="", bufsize=0): |
| global _state |
| if _state and _state._file: |
| raise RuntimeError, "input() already active" |
| _state = FileInput(files, inplace, backup, bufsize) |
| return _state |
| |
| def close(): |
| global _state |
| state = _state |
| _state = None |
| if state: |
| state.close() |
| |
| def nextfile(): |
| if not _state: |
| raise RuntimeError, "no active input()" |
| return _state.nextfile() |
| |
| def filename(): |
| if not _state: |
| raise RuntimeError, "no active input()" |
| return _state.filename() |
| |
| def lineno(): |
| if not _state: |
| raise RuntimeError, "no active input()" |
| return _state.lineno() |
| |
| def filelineno(): |
| if not _state: |
| raise RuntimeError, "no active input()" |
| return _state.filelineno() |
| |
| def isfirstline(): |
| if not _state: |
| raise RuntimeError, "no active input()" |
| return _state.isfirstline() |
| |
| def isstdin(): |
| if not _state: |
| raise RuntimeError, "no active input()" |
| return _state.isstdin() |
| |
| class FileInput: |
| |
| def __init__(self, files=None, inplace=0, backup="", bufsize=0): |
| if type(files) == type(''): |
| files = (files,) |
| else: |
| if files is None: |
| files = sys.argv[1:] |
| if not files: |
| files = ('-',) |
| else: |
| files = tuple(files) |
| self._files = files |
| self._inplace = inplace |
| self._backup = backup |
| self._bufsize = bufsize or DEFAULT_BUFSIZE |
| self._savestdout = None |
| self._output = None |
| self._filename = None |
| self._lineno = 0 |
| self._filelineno = 0 |
| self._file = None |
| self._isstdin = 0 |
| self._backupfilename = None |
| self._buffer = [] |
| self._bufindex = 0 |
| |
| def __del__(self): |
| self.close() |
| |
| def close(self): |
| self.nextfile() |
| self._files = () |
| |
| def __getitem__(self, i): |
| try: |
| line = self._buffer[self._bufindex] |
| except IndexError: |
| pass |
| else: |
| self._bufindex += 1 |
| self._lineno += 1 |
| self._filelineno += 1 |
| return line |
| if i != self._lineno: |
| raise RuntimeError, "accessing lines out of order" |
| line = self.readline() |
| if not line: |
| raise IndexError, "end of input reached" |
| return line |
| |
| def nextfile(self): |
| savestdout = self._savestdout |
| self._savestdout = 0 |
| if savestdout: |
| sys.stdout = savestdout |
| |
| output = self._output |
| self._output = 0 |
| if output: |
| output.close() |
| |
| file = self._file |
| self._file = 0 |
| if file and not self._isstdin: |
| file.close() |
| |
| backupfilename = self._backupfilename |
| self._backupfilename = 0 |
| if backupfilename and not self._backup: |
| try: os.unlink(backupfilename) |
| except: pass |
| |
| self._isstdin = 0 |
| self._buffer = [] |
| self._bufindex = 0 |
| |
| def readline(self): |
| try: |
| line = self._buffer[self._bufindex] |
| except IndexError: |
| pass |
| else: |
| self._bufindex += 1 |
| self._lineno += 1 |
| self._filelineno += 1 |
| return line |
| if not self._file: |
| if not self._files: |
| return "" |
| self._filename = self._files[0] |
| self._files = self._files[1:] |
| self._filelineno = 0 |
| self._file = None |
| self._isstdin = 0 |
| self._backupfilename = 0 |
| if self._filename == '-': |
| self._filename = '<stdin>' |
| self._file = sys.stdin |
| self._isstdin = 1 |
| else: |
| if self._inplace: |
| self._backupfilename = ( |
| self._filename + (self._backup or ".bak")) |
| try: os.unlink(self._backupfilename) |
| except os.error: pass |
| # The next few lines may raise IOError |
| os.rename(self._filename, self._backupfilename) |
| self._file = open(self._backupfilename, "r") |
| try: |
| perm = os.fstat(self._file.fileno())[stat.ST_MODE] |
| except: |
| self._output = open(self._filename, "w") |
| else: |
| fd = os.open(self._filename, |
| os.O_CREAT | os.O_WRONLY | os.O_TRUNC, |
| perm) |
| self._output = os.fdopen(fd, "w") |
| try: |
| os.chmod(self._filename, perm) |
| except: |
| pass |
| self._savestdout = sys.stdout |
| sys.stdout = self._output |
| else: |
| # This may raise IOError |
| self._file = open(self._filename, "r") |
| self._buffer = self._file.readlines(self._bufsize) |
| self._bufindex = 0 |
| if not self._buffer: |
| self.nextfile() |
| # Recursive call |
| return self.readline() |
| |
| def filename(self): |
| return self._filename |
| |
| def lineno(self): |
| return self._lineno |
| |
| def filelineno(self): |
| return self._filelineno |
| |
| def isfirstline(self): |
| return self._filelineno == 1 |
| |
| def isstdin(self): |
| return self._isstdin |
| |
| def _test(): |
| import getopt |
| inplace = 0 |
| backup = 0 |
| opts, args = getopt.getopt(sys.argv[1:], "ib:") |
| for o, a in opts: |
| if o == '-i': inplace = 1 |
| if o == '-b': backup = a |
| for line in input(args, inplace=inplace, backup=backup): |
| if line[-1:] == '\n': line = line[:-1] |
| if line[-1:] == '\r': line = line[:-1] |
| print "%d: %s[%d]%s %s" % (lineno(), filename(), filelineno(), |
| isfirstline() and "*" or "", line) |
| print "%d: %s[%d]" % (lineno(), filename(), filelineno()) |
| |
| if __name__ == '__main__': |
| _test() |