| /* Return the initial module search path. */ |
| |
| #include "Python.h" |
| #include "pycore_initconfig.h" |
| #include "osdefs.h" |
| #include "pycore_fileutils.h" |
| #include "pycore_pathconfig.h" |
| #include "pycore_pystate.h" |
| |
| #include <sys/types.h> |
| #include <string.h> |
| |
| #ifdef __APPLE__ |
| # include <mach-o/dyld.h> |
| #endif |
| |
| /* Search in some common locations for the associated Python libraries. |
| * |
| * Two directories must be found, the platform independent directory |
| * (prefix), containing the common .py and .pyc files, and the platform |
| * dependent directory (exec_prefix), containing the shared library |
| * modules. Note that prefix and exec_prefix can be the same directory, |
| * but for some installations, they are different. |
| * |
| * Py_GetPath() carries out separate searches for prefix and exec_prefix. |
| * Each search tries a number of different locations until a ``landmark'' |
| * file or directory is found. If no prefix or exec_prefix is found, a |
| * warning message is issued and the preprocessor defined PREFIX and |
| * EXEC_PREFIX are used (even though they will not work); python carries on |
| * as best as is possible, but most imports will fail. |
| * |
| * Before any searches are done, the location of the executable is |
| * determined. If argv[0] has one or more slashes in it, it is used |
| * unchanged. Otherwise, it must have been invoked from the shell's path, |
| * so we search $PATH for the named executable and use that. If the |
| * executable was not found on $PATH (or there was no $PATH environment |
| * variable), the original argv[0] string is used. |
| * |
| * Next, the executable location is examined to see if it is a symbolic |
| * link. If so, the link is chased (correctly interpreting a relative |
| * pathname if one is found) and the directory of the link target is used. |
| * |
| * Finally, argv0_path is set to the directory containing the executable |
| * (i.e. the last component is stripped). |
| * |
| * With argv0_path in hand, we perform a number of steps. The same steps |
| * are performed for prefix and for exec_prefix, but with a different |
| * landmark. |
| * |
| * Step 1. Are we running python out of the build directory? This is |
| * checked by looking for a different kind of landmark relative to |
| * argv0_path. For prefix, the landmark's path is derived from the VPATH |
| * preprocessor variable (taking into account that its value is almost, but |
| * not quite, what we need). For exec_prefix, the landmark is |
| * pybuilddir.txt. If the landmark is found, we're done. |
| * |
| * For the remaining steps, the prefix landmark will always be |
| * lib/python$VERSION/os.py and the exec_prefix will always be |
| * lib/python$VERSION/lib-dynload, where $VERSION is Python's version |
| * number as supplied by the Makefile. Note that this means that no more |
| * build directory checking is performed; if the first step did not find |
| * the landmarks, the assumption is that python is running from an |
| * installed setup. |
| * |
| * Step 2. See if the $PYTHONHOME environment variable points to the |
| * installed location of the Python libraries. If $PYTHONHOME is set, then |
| * it points to prefix and exec_prefix. $PYTHONHOME can be a single |
| * directory, which is used for both, or the prefix and exec_prefix |
| * directories separated by a colon. |
| * |
| * Step 3. Try to find prefix and exec_prefix relative to argv0_path, |
| * backtracking up the path until it is exhausted. This is the most common |
| * step to succeed. Note that if prefix and exec_prefix are different, |
| * exec_prefix is more likely to be found; however if exec_prefix is a |
| * subdirectory of prefix, both will be found. |
| * |
| * Step 4. Search the directories pointed to by the preprocessor variables |
| * PREFIX and EXEC_PREFIX. These are supplied by the Makefile but can be |
| * passed in as options to the configure script. |
| * |
| * That's it! |
| * |
| * Well, almost. Once we have determined prefix and exec_prefix, the |
| * preprocessor variable PYTHONPATH is used to construct a path. Each |
| * relative path on PYTHONPATH is prefixed with prefix. Then the directory |
| * containing the shared library modules is appended. The environment |
| * variable $PYTHONPATH is inserted in front of it all. Finally, the |
| * prefix and exec_prefix globals are tweaked so they reflect the values |
| * expected by other code, by stripping the "lib/python$VERSION/..." stuff |
| * off. If either points to the build directory, the globals are reset to |
| * the corresponding preprocessor variables (so sys.prefix will reflect the |
| * installation location, even though sys.path points into the build |
| * directory). This seems to make more sense given that currently the only |
| * known use of sys.prefix and sys.exec_prefix is for the ILU installation |
| * process to find the installed Python tree. |
| * |
| * An embedding application can use Py_SetPath() to override all of |
| * these authomatic path computations. |
| * |
| * NOTE: Windows MSVC builds use PC/getpathp.c instead! |
| */ |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| |
| #if !defined(PREFIX) || !defined(EXEC_PREFIX) || !defined(VERSION) || !defined(VPATH) |
| #error "PREFIX, EXEC_PREFIX, VERSION, and VPATH must be constant defined" |
| #endif |
| |
| #ifndef LANDMARK |
| #define LANDMARK L"os.py" |
| #endif |
| |
| #define DECODE_LOCALE_ERR(NAME, LEN) \ |
| ((LEN) == (size_t)-2) \ |
| ? _PyStatus_ERR("cannot decode " NAME) \ |
| : _PyStatus_NO_MEMORY() |
| |
| #define PATHLEN_ERR() _PyStatus_ERR("path configuration: path too long") |
| |
| typedef struct { |
| wchar_t *path_env; /* PATH environment variable */ |
| |
| wchar_t *pythonpath; /* PYTHONPATH define */ |
| wchar_t *prefix; /* PREFIX define */ |
| wchar_t *exec_prefix; /* EXEC_PREFIX define */ |
| |
| wchar_t *lib_python; /* "lib/pythonX.Y" */ |
| wchar_t argv0_path[MAXPATHLEN+1]; |
| wchar_t zip_path[MAXPATHLEN+1]; /* ".../lib/pythonXY.zip" */ |
| |
| int prefix_found; /* found platform independent libraries? */ |
| int exec_prefix_found; /* found the platform dependent libraries? */ |
| } PyCalculatePath; |
| |
| static const wchar_t delimiter[2] = {DELIM, '\0'}; |
| static const wchar_t separator[2] = {SEP, '\0'}; |
| |
| |
| /* Get file status. Encode the path to the locale encoding. */ |
| static int |
| _Py_wstat(const wchar_t* path, struct stat *buf) |
| { |
| int err; |
| char *fname; |
| fname = _Py_EncodeLocaleRaw(path, NULL); |
| if (fname == NULL) { |
| errno = EINVAL; |
| return -1; |
| } |
| err = stat(fname, buf); |
| PyMem_RawFree(fname); |
| return err; |
| } |
| |
| |
| static void |
| reduce(wchar_t *dir) |
| { |
| size_t i = wcslen(dir); |
| while (i > 0 && dir[i] != SEP) { |
| --i; |
| } |
| dir[i] = '\0'; |
| } |
| |
| |
| /* Is file, not directory */ |
| static int |
| isfile(const wchar_t *filename) |
| { |
| struct stat buf; |
| if (_Py_wstat(filename, &buf) != 0) { |
| return 0; |
| } |
| if (!S_ISREG(buf.st_mode)) { |
| return 0; |
| } |
| return 1; |
| } |
| |
| |
| /* Is module -- check for .pyc too */ |
| static int |
| ismodule(wchar_t *filename, size_t filename_len) |
| { |
| if (isfile(filename)) { |
| return 1; |
| } |
| |
| /* Check for the compiled version of prefix. */ |
| if (wcslen(filename) + 2 <= filename_len) { |
| wcscat(filename, L"c"); |
| if (isfile(filename)) { |
| return 1; |
| } |
| } |
| return 0; |
| } |
| |
| |
| /* Is executable file */ |
| static int |
| isxfile(const wchar_t *filename) |
| { |
| struct stat buf; |
| if (_Py_wstat(filename, &buf) != 0) { |
| return 0; |
| } |
| if (!S_ISREG(buf.st_mode)) { |
| return 0; |
| } |
| if ((buf.st_mode & 0111) == 0) { |
| return 0; |
| } |
| return 1; |
| } |
| |
| |
| /* Is directory */ |
| static int |
| isdir(wchar_t *filename) |
| { |
| struct stat buf; |
| if (_Py_wstat(filename, &buf) != 0) { |
| return 0; |
| } |
| if (!S_ISDIR(buf.st_mode)) { |
| return 0; |
| } |
| return 1; |
| } |
| |
| |
| /* Add a path component, by appending stuff to buffer. |
| buflen: 'buffer' length in characters including trailing NUL. */ |
| static PyStatus |
| joinpath(wchar_t *buffer, const wchar_t *stuff, size_t buflen) |
| { |
| size_t n, k; |
| if (stuff[0] != SEP) { |
| n = wcslen(buffer); |
| if (n >= buflen) { |
| return PATHLEN_ERR(); |
| } |
| |
| if (n > 0 && buffer[n-1] != SEP) { |
| buffer[n++] = SEP; |
| } |
| } |
| else { |
| n = 0; |
| } |
| |
| k = wcslen(stuff); |
| if (n + k >= buflen) { |
| return PATHLEN_ERR(); |
| } |
| wcsncpy(buffer+n, stuff, k); |
| buffer[n+k] = '\0'; |
| |
| return _PyStatus_OK(); |
| } |
| |
| |
| static inline int |
| safe_wcscpy(wchar_t *dst, const wchar_t *src, size_t n) |
| { |
| size_t srclen = wcslen(src); |
| if (n <= srclen) { |
| dst[0] = L'\0'; |
| return -1; |
| } |
| memcpy(dst, src, (srclen + 1) * sizeof(wchar_t)); |
| return 0; |
| } |
| |
| |
| /* copy_absolute requires that path be allocated at least |
| 'pathlen' characters (including trailing NUL). */ |
| static PyStatus |
| copy_absolute(wchar_t *path, const wchar_t *p, size_t pathlen) |
| { |
| if (p[0] == SEP) { |
| if (safe_wcscpy(path, p, pathlen) < 0) { |
| return PATHLEN_ERR(); |
| } |
| } |
| else { |
| if (!_Py_wgetcwd(path, pathlen)) { |
| /* unable to get the current directory */ |
| if (safe_wcscpy(path, p, pathlen) < 0) { |
| return PATHLEN_ERR(); |
| } |
| return _PyStatus_OK(); |
| } |
| if (p[0] == '.' && p[1] == SEP) { |
| p += 2; |
| } |
| PyStatus status = joinpath(path, p, pathlen); |
| if (_PyStatus_EXCEPTION(status)) { |
| return status; |
| } |
| } |
| return _PyStatus_OK(); |
| } |
| |
| |
| /* path_len: path length in characters including trailing NUL */ |
| static PyStatus |
| absolutize(wchar_t *path, size_t path_len) |
| { |
| if (path[0] == SEP) { |
| return _PyStatus_OK(); |
| } |
| |
| wchar_t abs_path[MAXPATHLEN+1]; |
| PyStatus status = copy_absolute(abs_path, path, Py_ARRAY_LENGTH(abs_path)); |
| if (_PyStatus_EXCEPTION(status)) { |
| return status; |
| } |
| |
| if (safe_wcscpy(path, abs_path, path_len) < 0) { |
| return PATHLEN_ERR(); |
| } |
| return _PyStatus_OK(); |
| } |
| |
| |
| #if defined(__CYGWIN__) || defined(__MINGW32__) |
| #ifndef EXE_SUFFIX |
| #define EXE_SUFFIX L".exe" |
| #endif |
| |
| /* pathlen: 'path' length in characters including trailing NUL */ |
| static PyStatus |
| add_exe_suffix(wchar_t *progpath, size_t progpathlen) |
| { |
| /* Check for already have an executable suffix */ |
| size_t n = wcslen(progpath); |
| size_t s = wcslen(EXE_SUFFIX); |
| if (wcsncasecmp(EXE_SUFFIX, progpath + n - s, s) == 0) { |
| return _PyStatus_OK(); |
| } |
| |
| if (n + s >= progpathlen) { |
| return PATHLEN_ERR(); |
| } |
| wcsncpy(progpath + n, EXE_SUFFIX, s); |
| progpath[n+s] = '\0'; |
| |
| if (!isxfile(progpath)) { |
| /* Path that added suffix is invalid: truncate (remove suffix) */ |
| progpath[n] = '\0'; |
| } |
| |
| return _PyStatus_OK(); |
| } |
| #endif |
| |
| |
| /* search_for_prefix requires that argv0_path be no more than MAXPATHLEN |
| bytes long. |
| */ |
| static PyStatus |
| search_for_prefix(const PyConfig *config, PyCalculatePath *calculate, |
| wchar_t *prefix, size_t prefix_len, |
| int *found) |
| { |
| PyStatus status; |
| size_t n; |
| wchar_t *vpath; |
| |
| /* If PYTHONHOME is set, we believe it unconditionally */ |
| if (config->home) { |
| if (safe_wcscpy(prefix, config->home, prefix_len) < 0) { |
| return PATHLEN_ERR(); |
| } |
| wchar_t *delim = wcschr(prefix, DELIM); |
| if (delim) { |
| *delim = L'\0'; |
| } |
| status = joinpath(prefix, calculate->lib_python, prefix_len); |
| if (_PyStatus_EXCEPTION(status)) { |
| return status; |
| } |
| status = joinpath(prefix, LANDMARK, prefix_len); |
| if (_PyStatus_EXCEPTION(status)) { |
| return status; |
| } |
| *found = 1; |
| return _PyStatus_OK(); |
| } |
| |
| /* Check to see if argv[0] is in the build directory */ |
| if (safe_wcscpy(prefix, calculate->argv0_path, prefix_len) < 0) { |
| return PATHLEN_ERR(); |
| } |
| status = joinpath(prefix, L"Modules/Setup.local", prefix_len); |
| if (_PyStatus_EXCEPTION(status)) { |
| return status; |
| } |
| |
| if (isfile(prefix)) { |
| /* Check VPATH to see if argv0_path is in the build directory. */ |
| vpath = Py_DecodeLocale(VPATH, NULL); |
| if (vpath != NULL) { |
| if (safe_wcscpy(prefix, calculate->argv0_path, prefix_len) < 0) { |
| return PATHLEN_ERR(); |
| } |
| status = joinpath(prefix, vpath, prefix_len); |
| PyMem_RawFree(vpath); |
| if (_PyStatus_EXCEPTION(status)) { |
| return status; |
| } |
| |
| status = joinpath(prefix, L"Lib", prefix_len); |
| if (_PyStatus_EXCEPTION(status)) { |
| return status; |
| } |
| status = joinpath(prefix, LANDMARK, prefix_len); |
| if (_PyStatus_EXCEPTION(status)) { |
| return status; |
| } |
| |
| if (ismodule(prefix, prefix_len)) { |
| *found = -1; |
| return _PyStatus_OK(); |
| } |
| } |
| } |
| |
| /* Search from argv0_path, until root is found */ |
| status = copy_absolute(prefix, calculate->argv0_path, prefix_len); |
| if (_PyStatus_EXCEPTION(status)) { |
| return status; |
| } |
| |
| do { |
| n = wcslen(prefix); |
| status = joinpath(prefix, calculate->lib_python, prefix_len); |
| if (_PyStatus_EXCEPTION(status)) { |
| return status; |
| } |
| status = joinpath(prefix, LANDMARK, prefix_len); |
| if (_PyStatus_EXCEPTION(status)) { |
| return status; |
| } |
| |
| if (ismodule(prefix, prefix_len)) { |
| *found = 1; |
| return _PyStatus_OK(); |
| } |
| prefix[n] = L'\0'; |
| reduce(prefix); |
| } while (prefix[0]); |
| |
| /* Look at configure's PREFIX */ |
| if (safe_wcscpy(prefix, calculate->prefix, prefix_len) < 0) { |
| return PATHLEN_ERR(); |
| } |
| status = joinpath(prefix, calculate->lib_python, prefix_len); |
| if (_PyStatus_EXCEPTION(status)) { |
| return status; |
| } |
| status = joinpath(prefix, LANDMARK, prefix_len); |
| if (_PyStatus_EXCEPTION(status)) { |
| return status; |
| } |
| |
| if (ismodule(prefix, prefix_len)) { |
| *found = 1; |
| return _PyStatus_OK(); |
| } |
| |
| /* Fail */ |
| *found = 0; |
| return _PyStatus_OK(); |
| } |
| |
| |
| static PyStatus |
| calculate_prefix(const PyConfig *config, |
| PyCalculatePath *calculate, wchar_t *prefix, size_t prefix_len) |
| { |
| PyStatus status; |
| |
| status = search_for_prefix(config, calculate, prefix, prefix_len, |
| &calculate->prefix_found); |
| if (_PyStatus_EXCEPTION(status)) { |
| return status; |
| } |
| |
| if (!calculate->prefix_found) { |
| if (config->pathconfig_warnings) { |
| fprintf(stderr, |
| "Could not find platform independent libraries <prefix>\n"); |
| } |
| if (safe_wcscpy(prefix, calculate->prefix, prefix_len) < 0) { |
| return PATHLEN_ERR(); |
| } |
| status = joinpath(prefix, calculate->lib_python, prefix_len); |
| if (_PyStatus_EXCEPTION(status)) { |
| return status; |
| } |
| } |
| else { |
| reduce(prefix); |
| } |
| return _PyStatus_OK(); |
| } |
| |
| |
| static PyStatus |
| calculate_reduce_prefix(PyCalculatePath *calculate, |
| wchar_t *prefix, size_t prefix_len) |
| { |
| /* Reduce prefix and exec_prefix to their essence, |
| * e.g. /usr/local/lib/python1.5 is reduced to /usr/local. |
| * If we're loading relative to the build directory, |
| * return the compiled-in defaults instead. |
| */ |
| if (calculate->prefix_found > 0) { |
| reduce(prefix); |
| reduce(prefix); |
| /* The prefix is the root directory, but reduce() chopped |
| * off the "/". */ |
| if (!prefix[0]) { |
| wcscpy(prefix, separator); |
| } |
| } |
| else { |
| if (safe_wcscpy(prefix, calculate->prefix, prefix_len) < 0) { |
| return PATHLEN_ERR(); |
| } |
| } |
| return _PyStatus_OK(); |
| } |
| |
| |
| /* search_for_exec_prefix requires that argv0_path be no more than |
| MAXPATHLEN bytes long. |
| */ |
| static PyStatus |
| search_for_exec_prefix(const PyConfig *config, |
| PyCalculatePath *calculate, |
| wchar_t *exec_prefix, size_t exec_prefix_len, |
| int *found) |
| { |
| PyStatus status; |
| size_t n; |
| |
| /* If PYTHONHOME is set, we believe it unconditionally */ |
| if (config->home) { |
| wchar_t *delim = wcschr(config->home, DELIM); |
| if (delim) { |
| if (safe_wcscpy(exec_prefix, delim+1, exec_prefix_len) < 0) { |
| return PATHLEN_ERR(); |
| } |
| } |
| else { |
| if (safe_wcscpy(exec_prefix, config->home, exec_prefix_len) < 0) { |
| return PATHLEN_ERR(); |
| } |
| } |
| status = joinpath(exec_prefix, calculate->lib_python, exec_prefix_len); |
| if (_PyStatus_EXCEPTION(status)) { |
| return status; |
| } |
| status = joinpath(exec_prefix, L"lib-dynload", exec_prefix_len); |
| if (_PyStatus_EXCEPTION(status)) { |
| return status; |
| } |
| *found = 1; |
| return _PyStatus_OK(); |
| } |
| |
| /* Check to see if argv[0] is in the build directory. "pybuilddir.txt" |
| is written by setup.py and contains the relative path to the location |
| of shared library modules. */ |
| if (safe_wcscpy(exec_prefix, calculate->argv0_path, exec_prefix_len) < 0) { |
| return PATHLEN_ERR(); |
| } |
| status = joinpath(exec_prefix, L"pybuilddir.txt", exec_prefix_len); |
| if (_PyStatus_EXCEPTION(status)) { |
| return status; |
| } |
| |
| if (isfile(exec_prefix)) { |
| FILE *f = _Py_wfopen(exec_prefix, L"rb"); |
| if (f == NULL) { |
| errno = 0; |
| } |
| else { |
| char buf[MAXPATHLEN + 1]; |
| n = fread(buf, 1, Py_ARRAY_LENGTH(buf) - 1, f); |
| buf[n] = '\0'; |
| fclose(f); |
| |
| wchar_t *pybuilddir; |
| size_t dec_len; |
| pybuilddir = _Py_DecodeUTF8_surrogateescape(buf, n, &dec_len); |
| if (!pybuilddir) { |
| return DECODE_LOCALE_ERR("pybuilddir.txt", dec_len); |
| } |
| |
| if (safe_wcscpy(exec_prefix, calculate->argv0_path, exec_prefix_len) < 0) { |
| return PATHLEN_ERR(); |
| } |
| status = joinpath(exec_prefix, pybuilddir, exec_prefix_len); |
| PyMem_RawFree(pybuilddir ); |
| if (_PyStatus_EXCEPTION(status)) { |
| return status; |
| } |
| |
| *found = -1; |
| return _PyStatus_OK(); |
| } |
| } |
| |
| /* Search from argv0_path, until root is found */ |
| status = copy_absolute(exec_prefix, calculate->argv0_path, exec_prefix_len); |
| if (_PyStatus_EXCEPTION(status)) { |
| return status; |
| } |
| |
| do { |
| n = wcslen(exec_prefix); |
| status = joinpath(exec_prefix, calculate->lib_python, exec_prefix_len); |
| if (_PyStatus_EXCEPTION(status)) { |
| return status; |
| } |
| status = joinpath(exec_prefix, L"lib-dynload", exec_prefix_len); |
| if (_PyStatus_EXCEPTION(status)) { |
| return status; |
| } |
| if (isdir(exec_prefix)) { |
| *found = 1; |
| return _PyStatus_OK(); |
| } |
| exec_prefix[n] = L'\0'; |
| reduce(exec_prefix); |
| } while (exec_prefix[0]); |
| |
| /* Look at configure's EXEC_PREFIX */ |
| if (safe_wcscpy(exec_prefix, calculate->exec_prefix, exec_prefix_len) < 0) { |
| return PATHLEN_ERR(); |
| } |
| status = joinpath(exec_prefix, calculate->lib_python, exec_prefix_len); |
| if (_PyStatus_EXCEPTION(status)) { |
| return status; |
| } |
| status = joinpath(exec_prefix, L"lib-dynload", exec_prefix_len); |
| if (_PyStatus_EXCEPTION(status)) { |
| return status; |
| } |
| if (isdir(exec_prefix)) { |
| *found = 1; |
| return _PyStatus_OK(); |
| } |
| |
| /* Fail */ |
| *found = 0; |
| return _PyStatus_OK(); |
| } |
| |
| |
| static PyStatus |
| calculate_exec_prefix(const PyConfig *config, |
| PyCalculatePath *calculate, |
| wchar_t *exec_prefix, size_t exec_prefix_len) |
| { |
| PyStatus status; |
| |
| status = search_for_exec_prefix(config, calculate, |
| exec_prefix, exec_prefix_len, |
| &calculate->exec_prefix_found); |
| if (_PyStatus_EXCEPTION(status)) { |
| return status; |
| } |
| |
| if (!calculate->exec_prefix_found) { |
| if (config->pathconfig_warnings) { |
| fprintf(stderr, |
| "Could not find platform dependent libraries <exec_prefix>\n"); |
| } |
| if (safe_wcscpy(exec_prefix, calculate->exec_prefix, exec_prefix_len) < 0) { |
| return PATHLEN_ERR(); |
| } |
| status = joinpath(exec_prefix, L"lib/lib-dynload", exec_prefix_len); |
| if (_PyStatus_EXCEPTION(status)) { |
| return status; |
| } |
| } |
| /* If we found EXEC_PREFIX do *not* reduce it! (Yet.) */ |
| return _PyStatus_OK(); |
| } |
| |
| |
| static PyStatus |
| calculate_reduce_exec_prefix(PyCalculatePath *calculate, |
| wchar_t *exec_prefix, size_t exec_prefix_len) |
| { |
| if (calculate->exec_prefix_found > 0) { |
| reduce(exec_prefix); |
| reduce(exec_prefix); |
| reduce(exec_prefix); |
| if (!exec_prefix[0]) { |
| wcscpy(exec_prefix, separator); |
| } |
| } |
| else { |
| if (safe_wcscpy(exec_prefix, calculate->exec_prefix, exec_prefix_len) < 0) { |
| return PATHLEN_ERR(); |
| } |
| } |
| return _PyStatus_OK(); |
| } |
| |
| |
| static PyStatus |
| calculate_program_full_path(const PyConfig *config, |
| PyCalculatePath *calculate, _PyPathConfig *pathconfig) |
| { |
| PyStatus status; |
| wchar_t program_full_path[MAXPATHLEN + 1]; |
| const size_t program_full_path_len = Py_ARRAY_LENGTH(program_full_path); |
| memset(program_full_path, 0, sizeof(program_full_path)); |
| |
| #ifdef __APPLE__ |
| char execpath[MAXPATHLEN + 1]; |
| #if MAC_OS_X_VERSION_MAX_ALLOWED >= MAC_OS_X_VERSION_10_4 |
| uint32_t nsexeclength = Py_ARRAY_LENGTH(execpath) - 1; |
| #else |
| unsigned long nsexeclength = Py_ARRAY_LENGTH(execpath) - 1; |
| #endif |
| #endif |
| |
| /* If there is no slash in the argv0 path, then we have to |
| * assume python is on the user's $PATH, since there's no |
| * other way to find a directory to start the search from. If |
| * $PATH isn't exported, you lose. |
| */ |
| if (wcschr(config->program_name, SEP)) { |
| if (safe_wcscpy(program_full_path, config->program_name, |
| program_full_path_len) < 0) { |
| return PATHLEN_ERR(); |
| } |
| } |
| #ifdef __APPLE__ |
| /* On Mac OS X, if a script uses an interpreter of the form |
| * "#!/opt/python2.3/bin/python", the kernel only passes "python" |
| * as argv[0], which falls through to the $PATH search below. |
| * If /opt/python2.3/bin isn't in your path, or is near the end, |
| * this algorithm may incorrectly find /usr/bin/python. To work |
| * around this, we can use _NSGetExecutablePath to get a better |
| * hint of what the intended interpreter was, although this |
| * will fail if a relative path was used. but in that case, |
| * absolutize() should help us out below |
| */ |
| else if(0 == _NSGetExecutablePath(execpath, &nsexeclength) && |
| execpath[0] == SEP) |
| { |
| size_t len; |
| wchar_t *path = Py_DecodeLocale(execpath, &len); |
| if (path == NULL) { |
| return DECODE_LOCALE_ERR("executable path", len); |
| } |
| if (safe_wcscpy(program_full_path, path, program_full_path_len) < 0) { |
| PyMem_RawFree(path); |
| return PATHLEN_ERR(); |
| } |
| PyMem_RawFree(path); |
| } |
| #endif /* __APPLE__ */ |
| else if (calculate->path_env) { |
| wchar_t *path = calculate->path_env; |
| while (1) { |
| wchar_t *delim = wcschr(path, DELIM); |
| |
| if (delim) { |
| size_t len = delim - path; |
| if (len >= program_full_path_len) { |
| return PATHLEN_ERR(); |
| } |
| wcsncpy(program_full_path, path, len); |
| program_full_path[len] = '\0'; |
| } |
| else { |
| if (safe_wcscpy(program_full_path, path, |
| program_full_path_len) < 0) { |
| return PATHLEN_ERR(); |
| } |
| } |
| |
| status = joinpath(program_full_path, config->program_name, |
| program_full_path_len); |
| if (_PyStatus_EXCEPTION(status)) { |
| return status; |
| } |
| |
| if (isxfile(program_full_path)) { |
| break; |
| } |
| |
| if (!delim) { |
| program_full_path[0] = L'\0'; |
| break; |
| } |
| path = delim + 1; |
| } |
| } |
| else { |
| program_full_path[0] = '\0'; |
| } |
| if (program_full_path[0] != SEP && program_full_path[0] != '\0') { |
| status = absolutize(program_full_path, program_full_path_len); |
| if (_PyStatus_EXCEPTION(status)) { |
| return status; |
| } |
| } |
| #if defined(__CYGWIN__) || defined(__MINGW32__) |
| /* For these platforms it is necessary to ensure that the .exe suffix |
| * is appended to the filename, otherwise there is potential for |
| * sys.executable to return the name of a directory under the same |
| * path (bpo-28441). |
| */ |
| if (program_full_path[0] != '\0') { |
| status = add_exe_suffix(program_full_path, program_full_path_len); |
| if (_PyStatus_EXCEPTION(status)) { |
| return status; |
| } |
| } |
| #endif |
| |
| pathconfig->program_full_path = _PyMem_RawWcsdup(program_full_path); |
| if (pathconfig->program_full_path == NULL) { |
| return _PyStatus_NO_MEMORY(); |
| } |
| return _PyStatus_OK(); |
| } |
| |
| |
| static PyStatus |
| calculate_argv0_path(PyCalculatePath *calculate, const wchar_t *program_full_path) |
| { |
| const size_t argv0_path_len = Py_ARRAY_LENGTH(calculate->argv0_path); |
| if (safe_wcscpy(calculate->argv0_path, program_full_path, argv0_path_len) < 0) { |
| return PATHLEN_ERR(); |
| } |
| |
| #ifdef WITH_NEXT_FRAMEWORK |
| NSModule pythonModule; |
| |
| /* On Mac OS X we have a special case if we're running from a framework. |
| ** This is because the python home should be set relative to the library, |
| ** which is in the framework, not relative to the executable, which may |
| ** be outside of the framework. Except when we're in the build directory... |
| */ |
| pythonModule = NSModuleForSymbol(NSLookupAndBindSymbol("_Py_Initialize")); |
| /* Use dylib functions to find out where the framework was loaded from */ |
| const char* modPath = NSLibraryNameForModule(pythonModule); |
| if (modPath != NULL) { |
| /* We're in a framework. */ |
| /* See if we might be in the build directory. The framework in the |
| ** build directory is incomplete, it only has the .dylib and a few |
| ** needed symlinks, it doesn't have the Lib directories and such. |
| ** If we're running with the framework from the build directory we must |
| ** be running the interpreter in the build directory, so we use the |
| ** build-directory-specific logic to find Lib and such. |
| */ |
| PyStatus status; |
| size_t len; |
| wchar_t* wbuf = Py_DecodeLocale(modPath, &len); |
| if (wbuf == NULL) { |
| return DECODE_LOCALE_ERR("framework location", len); |
| } |
| |
| if (safe_wcscpy(calculate->argv0_path, wbuf, argv0_path_len) < 0) { |
| return PATHLEN_ERR(); |
| } |
| reduce(calculate->argv0_path); |
| status = joinpath(calculate->argv0_path, calculate->lib_python, argv0_path_len); |
| if (_PyStatus_EXCEPTION(status)) { |
| PyMem_RawFree(wbuf); |
| return status; |
| } |
| status = joinpath(calculate->argv0_path, LANDMARK, argv0_path_len); |
| if (_PyStatus_EXCEPTION(status)) { |
| PyMem_RawFree(wbuf); |
| return status; |
| } |
| if (!ismodule(calculate->argv0_path, |
| Py_ARRAY_LENGTH(calculate->argv0_path))) { |
| /* We are in the build directory so use the name of the |
| executable - we know that the absolute path is passed */ |
| if (safe_wcscpy(calculate->argv0_path, program_full_path, |
| argv0_path_len) < 0) { |
| return PATHLEN_ERR(); |
| } |
| } |
| else { |
| /* Use the location of the library as the program_full_path */ |
| if (safe_wcscpy(calculate->argv0_path, wbuf, argv0_path_len) < 0) { |
| return PATHLEN_ERR(); |
| } |
| } |
| PyMem_RawFree(wbuf); |
| } |
| #endif |
| |
| #if HAVE_READLINK |
| wchar_t tmpbuffer[MAXPATHLEN + 1]; |
| const size_t buflen = Py_ARRAY_LENGTH(tmpbuffer); |
| int linklen = _Py_wreadlink(program_full_path, tmpbuffer, buflen); |
| while (linklen != -1) { |
| if (tmpbuffer[0] == SEP) { |
| /* tmpbuffer should never be longer than MAXPATHLEN, |
| but extra check does not hurt */ |
| if (safe_wcscpy(calculate->argv0_path, tmpbuffer, argv0_path_len) < 0) { |
| return PATHLEN_ERR(); |
| } |
| } |
| else { |
| /* Interpret relative to program_full_path */ |
| PyStatus status; |
| reduce(calculate->argv0_path); |
| status = joinpath(calculate->argv0_path, tmpbuffer, argv0_path_len); |
| if (_PyStatus_EXCEPTION(status)) { |
| return status; |
| } |
| } |
| linklen = _Py_wreadlink(calculate->argv0_path, tmpbuffer, buflen); |
| } |
| #endif /* HAVE_READLINK */ |
| |
| reduce(calculate->argv0_path); |
| /* At this point, argv0_path is guaranteed to be less than |
| MAXPATHLEN bytes long. */ |
| return _PyStatus_OK(); |
| } |
| |
| |
| /* Search for an "pyvenv.cfg" environment configuration file, first in the |
| executable's directory and then in the parent directory. |
| If found, open it for use when searching for prefixes. |
| */ |
| static PyStatus |
| calculate_read_pyenv(PyCalculatePath *calculate) |
| { |
| PyStatus status; |
| wchar_t tmpbuffer[MAXPATHLEN+1]; |
| const size_t buflen = Py_ARRAY_LENGTH(tmpbuffer); |
| wchar_t *env_cfg = L"pyvenv.cfg"; |
| FILE *env_file; |
| |
| if (safe_wcscpy(tmpbuffer, calculate->argv0_path, buflen) < 0) { |
| return PATHLEN_ERR(); |
| } |
| |
| status = joinpath(tmpbuffer, env_cfg, buflen); |
| if (_PyStatus_EXCEPTION(status)) { |
| return status; |
| } |
| env_file = _Py_wfopen(tmpbuffer, L"r"); |
| if (env_file == NULL) { |
| errno = 0; |
| |
| reduce(tmpbuffer); |
| reduce(tmpbuffer); |
| status = joinpath(tmpbuffer, env_cfg, buflen); |
| if (_PyStatus_EXCEPTION(status)) { |
| return status; |
| } |
| |
| env_file = _Py_wfopen(tmpbuffer, L"r"); |
| if (env_file == NULL) { |
| errno = 0; |
| } |
| } |
| |
| if (env_file == NULL) { |
| return _PyStatus_OK(); |
| } |
| |
| /* Look for a 'home' variable and set argv0_path to it, if found */ |
| if (_Py_FindEnvConfigValue(env_file, L"home", tmpbuffer, buflen)) { |
| if (safe_wcscpy(calculate->argv0_path, tmpbuffer, |
| Py_ARRAY_LENGTH(calculate->argv0_path)) < 0) { |
| return PATHLEN_ERR(); |
| } |
| } |
| fclose(env_file); |
| return _PyStatus_OK(); |
| } |
| |
| |
| static PyStatus |
| calculate_zip_path(PyCalculatePath *calculate, const wchar_t *prefix) |
| { |
| PyStatus status; |
| const size_t zip_path_len = Py_ARRAY_LENGTH(calculate->zip_path); |
| if (safe_wcscpy(calculate->zip_path, prefix, zip_path_len) < 0) { |
| return PATHLEN_ERR(); |
| } |
| |
| if (calculate->prefix_found > 0) { |
| /* Use the reduced prefix returned by Py_GetPrefix() */ |
| reduce(calculate->zip_path); |
| reduce(calculate->zip_path); |
| } |
| else { |
| if (safe_wcscpy(calculate->zip_path, calculate->prefix, zip_path_len) < 0) { |
| return PATHLEN_ERR(); |
| } |
| } |
| status = joinpath(calculate->zip_path, L"lib/python00.zip", zip_path_len); |
| if (_PyStatus_EXCEPTION(status)) { |
| return status; |
| } |
| |
| /* Replace "00" with version */ |
| size_t bufsz = wcslen(calculate->zip_path); |
| calculate->zip_path[bufsz - 6] = VERSION[0]; |
| calculate->zip_path[bufsz - 5] = VERSION[2]; |
| return _PyStatus_OK(); |
| } |
| |
| |
| static PyStatus |
| calculate_module_search_path(const PyConfig *config, |
| PyCalculatePath *calculate, |
| const wchar_t *prefix, const wchar_t *exec_prefix, |
| _PyPathConfig *pathconfig) |
| { |
| /* Calculate size of return buffer */ |
| size_t bufsz = 0; |
| if (config->pythonpath_env != NULL) { |
| bufsz += wcslen(config->pythonpath_env) + 1; |
| } |
| |
| wchar_t *defpath = calculate->pythonpath; |
| size_t prefixsz = wcslen(prefix) + 1; |
| while (1) { |
| wchar_t *delim = wcschr(defpath, DELIM); |
| |
| if (defpath[0] != SEP) { |
| /* Paths are relative to prefix */ |
| bufsz += prefixsz; |
| } |
| |
| if (delim) { |
| bufsz += delim - defpath + 1; |
| } |
| else { |
| bufsz += wcslen(defpath) + 1; |
| break; |
| } |
| defpath = delim + 1; |
| } |
| |
| bufsz += wcslen(calculate->zip_path) + 1; |
| bufsz += wcslen(exec_prefix) + 1; |
| |
| /* Allocate the buffer */ |
| wchar_t *buf = PyMem_RawMalloc(bufsz * sizeof(wchar_t)); |
| if (buf == NULL) { |
| return _PyStatus_NO_MEMORY(); |
| } |
| buf[0] = '\0'; |
| |
| /* Run-time value of $PYTHONPATH goes first */ |
| if (config->pythonpath_env) { |
| wcscpy(buf, config->pythonpath_env); |
| wcscat(buf, delimiter); |
| } |
| |
| /* Next is the default zip path */ |
| wcscat(buf, calculate->zip_path); |
| wcscat(buf, delimiter); |
| |
| /* Next goes merge of compile-time $PYTHONPATH with |
| * dynamically located prefix. |
| */ |
| defpath = calculate->pythonpath; |
| while (1) { |
| wchar_t *delim = wcschr(defpath, DELIM); |
| |
| if (defpath[0] != SEP) { |
| wcscat(buf, prefix); |
| if (prefixsz >= 2 && prefix[prefixsz - 2] != SEP && |
| defpath[0] != (delim ? DELIM : L'\0')) |
| { |
| /* not empty */ |
| wcscat(buf, separator); |
| } |
| } |
| |
| if (delim) { |
| size_t len = delim - defpath + 1; |
| size_t end = wcslen(buf) + len; |
| wcsncat(buf, defpath, len); |
| buf[end] = '\0'; |
| } |
| else { |
| wcscat(buf, defpath); |
| break; |
| } |
| defpath = delim + 1; |
| } |
| wcscat(buf, delimiter); |
| |
| /* Finally, on goes the directory for dynamic-load modules */ |
| wcscat(buf, exec_prefix); |
| |
| pathconfig->module_search_path = buf; |
| return _PyStatus_OK(); |
| } |
| |
| |
| static PyStatus |
| calculate_init(PyCalculatePath *calculate, |
| const PyConfig *config) |
| { |
| size_t len; |
| const char *path = getenv("PATH"); |
| if (path) { |
| calculate->path_env = Py_DecodeLocale(path, &len); |
| if (!calculate->path_env) { |
| return DECODE_LOCALE_ERR("PATH environment variable", len); |
| } |
| } |
| |
| calculate->pythonpath = Py_DecodeLocale(PYTHONPATH, &len); |
| if (!calculate->pythonpath) { |
| return DECODE_LOCALE_ERR("PYTHONPATH define", len); |
| } |
| calculate->prefix = Py_DecodeLocale(PREFIX, &len); |
| if (!calculate->prefix) { |
| return DECODE_LOCALE_ERR("PREFIX define", len); |
| } |
| calculate->exec_prefix = Py_DecodeLocale(EXEC_PREFIX, &len); |
| if (!calculate->exec_prefix) { |
| return DECODE_LOCALE_ERR("EXEC_PREFIX define", len); |
| } |
| calculate->lib_python = Py_DecodeLocale("lib/python" VERSION, &len); |
| if (!calculate->lib_python) { |
| return DECODE_LOCALE_ERR("EXEC_PREFIX define", len); |
| } |
| return _PyStatus_OK(); |
| } |
| |
| |
| static void |
| calculate_free(PyCalculatePath *calculate) |
| { |
| PyMem_RawFree(calculate->pythonpath); |
| PyMem_RawFree(calculate->prefix); |
| PyMem_RawFree(calculate->exec_prefix); |
| PyMem_RawFree(calculate->lib_python); |
| PyMem_RawFree(calculate->path_env); |
| } |
| |
| |
| static PyStatus |
| calculate_path_impl(const PyConfig *config, |
| PyCalculatePath *calculate, _PyPathConfig *pathconfig) |
| { |
| PyStatus status; |
| |
| status = calculate_program_full_path(config, calculate, pathconfig); |
| if (_PyStatus_EXCEPTION(status)) { |
| return status; |
| } |
| |
| status = calculate_argv0_path(calculate, pathconfig->program_full_path); |
| if (_PyStatus_EXCEPTION(status)) { |
| return status; |
| } |
| |
| status = calculate_read_pyenv(calculate); |
| if (_PyStatus_EXCEPTION(status)) { |
| return status; |
| } |
| |
| wchar_t prefix[MAXPATHLEN+1]; |
| memset(prefix, 0, sizeof(prefix)); |
| status = calculate_prefix(config, calculate, |
| prefix, Py_ARRAY_LENGTH(prefix)); |
| if (_PyStatus_EXCEPTION(status)) { |
| return status; |
| } |
| |
| status = calculate_zip_path(calculate, prefix); |
| if (_PyStatus_EXCEPTION(status)) { |
| return status; |
| } |
| |
| wchar_t exec_prefix[MAXPATHLEN+1]; |
| memset(exec_prefix, 0, sizeof(exec_prefix)); |
| status = calculate_exec_prefix(config, calculate, |
| exec_prefix, Py_ARRAY_LENGTH(exec_prefix)); |
| if (_PyStatus_EXCEPTION(status)) { |
| return status; |
| } |
| |
| if ((!calculate->prefix_found || !calculate->exec_prefix_found) && |
| config->pathconfig_warnings) |
| { |
| fprintf(stderr, |
| "Consider setting $PYTHONHOME to <prefix>[:<exec_prefix>]\n"); |
| } |
| |
| status = calculate_module_search_path(config, calculate, |
| prefix, exec_prefix, pathconfig); |
| if (_PyStatus_EXCEPTION(status)) { |
| return status; |
| } |
| |
| status = calculate_reduce_prefix(calculate, prefix, Py_ARRAY_LENGTH(prefix)); |
| if (_PyStatus_EXCEPTION(status)) { |
| return status; |
| } |
| |
| pathconfig->prefix = _PyMem_RawWcsdup(prefix); |
| if (pathconfig->prefix == NULL) { |
| return _PyStatus_NO_MEMORY(); |
| } |
| |
| status = calculate_reduce_exec_prefix(calculate, |
| exec_prefix, Py_ARRAY_LENGTH(exec_prefix)); |
| if (_PyStatus_EXCEPTION(status)) { |
| return status; |
| } |
| |
| pathconfig->exec_prefix = _PyMem_RawWcsdup(exec_prefix); |
| if (pathconfig->exec_prefix == NULL) { |
| return _PyStatus_NO_MEMORY(); |
| } |
| |
| return _PyStatus_OK(); |
| } |
| |
| |
| PyStatus |
| _PyPathConfig_Calculate(_PyPathConfig *pathconfig, const PyConfig *config) |
| { |
| PyStatus status; |
| PyCalculatePath calculate; |
| memset(&calculate, 0, sizeof(calculate)); |
| |
| status = calculate_init(&calculate, config); |
| if (_PyStatus_EXCEPTION(status)) { |
| goto done; |
| } |
| |
| status = calculate_path_impl(config, &calculate, pathconfig); |
| if (_PyStatus_EXCEPTION(status)) { |
| goto done; |
| } |
| |
| status = _PyStatus_OK(); |
| |
| done: |
| calculate_free(&calculate); |
| return status; |
| } |
| |
| #ifdef __cplusplus |
| } |
| #endif |