| /* |
| * Secret Labs' Regular Expression Engine |
| * |
| * regular expression matching engine |
| * |
| * Copyright (c) 1997-2001 by Secret Labs AB. All rights reserved. |
| * |
| * See the _sre.c file for information on usage and redistribution. |
| */ |
| |
| /* String matching engine */ |
| |
| /* This file is included three times, with different character settings */ |
| |
| LOCAL(int) |
| SRE(at)(SRE_STATE* state, SRE_CHAR* ptr, SRE_CODE at) |
| { |
| /* check if pointer is at given position */ |
| |
| Py_ssize_t thisp, thatp; |
| |
| switch (at) { |
| |
| case SRE_AT_BEGINNING: |
| case SRE_AT_BEGINNING_STRING: |
| return ((void*) ptr == state->beginning); |
| |
| case SRE_AT_BEGINNING_LINE: |
| return ((void*) ptr == state->beginning || |
| SRE_IS_LINEBREAK((int) ptr[-1])); |
| |
| case SRE_AT_END: |
| return (((SRE_CHAR *)state->end - ptr == 1 && |
| SRE_IS_LINEBREAK((int) ptr[0])) || |
| ((void*) ptr == state->end)); |
| |
| case SRE_AT_END_LINE: |
| return ((void*) ptr == state->end || |
| SRE_IS_LINEBREAK((int) ptr[0])); |
| |
| case SRE_AT_END_STRING: |
| return ((void*) ptr == state->end); |
| |
| case SRE_AT_BOUNDARY: |
| if (state->beginning == state->end) |
| return 0; |
| thatp = ((void*) ptr > state->beginning) ? |
| SRE_IS_WORD((int) ptr[-1]) : 0; |
| thisp = ((void*) ptr < state->end) ? |
| SRE_IS_WORD((int) ptr[0]) : 0; |
| return thisp != thatp; |
| |
| case SRE_AT_NON_BOUNDARY: |
| if (state->beginning == state->end) |
| return 0; |
| thatp = ((void*) ptr > state->beginning) ? |
| SRE_IS_WORD((int) ptr[-1]) : 0; |
| thisp = ((void*) ptr < state->end) ? |
| SRE_IS_WORD((int) ptr[0]) : 0; |
| return thisp == thatp; |
| |
| case SRE_AT_LOC_BOUNDARY: |
| if (state->beginning == state->end) |
| return 0; |
| thatp = ((void*) ptr > state->beginning) ? |
| SRE_LOC_IS_WORD((int) ptr[-1]) : 0; |
| thisp = ((void*) ptr < state->end) ? |
| SRE_LOC_IS_WORD((int) ptr[0]) : 0; |
| return thisp != thatp; |
| |
| case SRE_AT_LOC_NON_BOUNDARY: |
| if (state->beginning == state->end) |
| return 0; |
| thatp = ((void*) ptr > state->beginning) ? |
| SRE_LOC_IS_WORD((int) ptr[-1]) : 0; |
| thisp = ((void*) ptr < state->end) ? |
| SRE_LOC_IS_WORD((int) ptr[0]) : 0; |
| return thisp == thatp; |
| |
| case SRE_AT_UNI_BOUNDARY: |
| if (state->beginning == state->end) |
| return 0; |
| thatp = ((void*) ptr > state->beginning) ? |
| SRE_UNI_IS_WORD((int) ptr[-1]) : 0; |
| thisp = ((void*) ptr < state->end) ? |
| SRE_UNI_IS_WORD((int) ptr[0]) : 0; |
| return thisp != thatp; |
| |
| case SRE_AT_UNI_NON_BOUNDARY: |
| if (state->beginning == state->end) |
| return 0; |
| thatp = ((void*) ptr > state->beginning) ? |
| SRE_UNI_IS_WORD((int) ptr[-1]) : 0; |
| thisp = ((void*) ptr < state->end) ? |
| SRE_UNI_IS_WORD((int) ptr[0]) : 0; |
| return thisp == thatp; |
| |
| } |
| |
| return 0; |
| } |
| |
| LOCAL(int) |
| SRE(charset)(SRE_STATE* state, SRE_CODE* set, SRE_CODE ch) |
| { |
| /* check if character is a member of the given set */ |
| |
| int ok = 1; |
| |
| for (;;) { |
| switch (*set++) { |
| |
| case SRE_OP_FAILURE: |
| return !ok; |
| |
| case SRE_OP_LITERAL: |
| /* <LITERAL> <code> */ |
| if (ch == set[0]) |
| return ok; |
| set++; |
| break; |
| |
| case SRE_OP_CATEGORY: |
| /* <CATEGORY> <code> */ |
| if (sre_category(set[0], (int) ch)) |
| return ok; |
| set++; |
| break; |
| |
| case SRE_OP_CHARSET: |
| /* <CHARSET> <bitmap> */ |
| if (ch < 256 && |
| (set[ch/SRE_CODE_BITS] & (1u << (ch & (SRE_CODE_BITS-1))))) |
| return ok; |
| set += 256/SRE_CODE_BITS; |
| break; |
| |
| case SRE_OP_RANGE: |
| /* <RANGE> <lower> <upper> */ |
| if (set[0] <= ch && ch <= set[1]) |
| return ok; |
| set += 2; |
| break; |
| |
| case SRE_OP_RANGE_IGNORE: |
| /* <RANGE_IGNORE> <lower> <upper> */ |
| { |
| SRE_CODE uch; |
| /* ch is already lower cased */ |
| if (set[0] <= ch && ch <= set[1]) |
| return ok; |
| uch = state->upper(ch); |
| if (set[0] <= uch && uch <= set[1]) |
| return ok; |
| set += 2; |
| break; |
| } |
| |
| case SRE_OP_NEGATE: |
| ok = !ok; |
| break; |
| |
| case SRE_OP_BIGCHARSET: |
| /* <BIGCHARSET> <blockcount> <256 blockindices> <blocks> */ |
| { |
| Py_ssize_t count, block; |
| count = *(set++); |
| |
| if (ch < 0x10000u) |
| block = ((unsigned char*)set)[ch >> 8]; |
| else |
| block = -1; |
| set += 256/sizeof(SRE_CODE); |
| if (block >=0 && |
| (set[(block * 256 + (ch & 255))/SRE_CODE_BITS] & |
| (1u << (ch & (SRE_CODE_BITS-1))))) |
| return ok; |
| set += count * (256/SRE_CODE_BITS); |
| break; |
| } |
| |
| default: |
| /* internal error -- there's not much we can do about it |
| here, so let's just pretend it didn't match... */ |
| return 0; |
| } |
| } |
| } |
| |
| LOCAL(Py_ssize_t) SRE(match)(SRE_STATE* state, SRE_CODE* pattern, int match_all); |
| |
| LOCAL(Py_ssize_t) |
| SRE(count)(SRE_STATE* state, SRE_CODE* pattern, Py_ssize_t maxcount) |
| { |
| SRE_CODE chr; |
| SRE_CHAR c; |
| SRE_CHAR* ptr = (SRE_CHAR *)state->ptr; |
| SRE_CHAR* end = (SRE_CHAR *)state->end; |
| Py_ssize_t i; |
| |
| /* adjust end */ |
| if (maxcount < end - ptr && maxcount != SRE_MAXREPEAT) |
| end = ptr + maxcount; |
| |
| switch (pattern[0]) { |
| |
| case SRE_OP_IN: |
| /* repeated set */ |
| TRACE(("|%p|%p|COUNT IN\n", pattern, ptr)); |
| while (ptr < end && SRE(charset)(state, pattern + 2, *ptr)) |
| ptr++; |
| break; |
| |
| case SRE_OP_ANY: |
| /* repeated dot wildcard. */ |
| TRACE(("|%p|%p|COUNT ANY\n", pattern, ptr)); |
| while (ptr < end && !SRE_IS_LINEBREAK(*ptr)) |
| ptr++; |
| break; |
| |
| case SRE_OP_ANY_ALL: |
| /* repeated dot wildcard. skip to the end of the target |
| string, and backtrack from there */ |
| TRACE(("|%p|%p|COUNT ANY_ALL\n", pattern, ptr)); |
| ptr = end; |
| break; |
| |
| case SRE_OP_LITERAL: |
| /* repeated literal */ |
| chr = pattern[1]; |
| TRACE(("|%p|%p|COUNT LITERAL %d\n", pattern, ptr, chr)); |
| c = (SRE_CHAR) chr; |
| #if SIZEOF_SRE_CHAR < 4 |
| if ((SRE_CODE) c != chr) |
| ; /* literal can't match: doesn't fit in char width */ |
| else |
| #endif |
| while (ptr < end && *ptr == c) |
| ptr++; |
| break; |
| |
| case SRE_OP_LITERAL_IGNORE: |
| /* repeated literal */ |
| chr = pattern[1]; |
| TRACE(("|%p|%p|COUNT LITERAL_IGNORE %d\n", pattern, ptr, chr)); |
| while (ptr < end && (SRE_CODE) state->lower(*ptr) == chr) |
| ptr++; |
| break; |
| |
| case SRE_OP_NOT_LITERAL: |
| /* repeated non-literal */ |
| chr = pattern[1]; |
| TRACE(("|%p|%p|COUNT NOT_LITERAL %d\n", pattern, ptr, chr)); |
| c = (SRE_CHAR) chr; |
| #if SIZEOF_SRE_CHAR < 4 |
| if ((SRE_CODE) c != chr) |
| ptr = end; /* literal can't match: doesn't fit in char width */ |
| else |
| #endif |
| while (ptr < end && *ptr != c) |
| ptr++; |
| break; |
| |
| case SRE_OP_NOT_LITERAL_IGNORE: |
| /* repeated non-literal */ |
| chr = pattern[1]; |
| TRACE(("|%p|%p|COUNT NOT_LITERAL_IGNORE %d\n", pattern, ptr, chr)); |
| while (ptr < end && (SRE_CODE) state->lower(*ptr) != chr) |
| ptr++; |
| break; |
| |
| default: |
| /* repeated single character pattern */ |
| TRACE(("|%p|%p|COUNT SUBPATTERN\n", pattern, ptr)); |
| while ((SRE_CHAR*) state->ptr < end) { |
| i = SRE(match)(state, pattern, 0); |
| if (i < 0) |
| return i; |
| if (!i) |
| break; |
| } |
| TRACE(("|%p|%p|COUNT %" PY_FORMAT_SIZE_T "d\n", pattern, ptr, |
| (SRE_CHAR*) state->ptr - ptr)); |
| return (SRE_CHAR*) state->ptr - ptr; |
| } |
| |
| TRACE(("|%p|%p|COUNT %" PY_FORMAT_SIZE_T "d\n", pattern, ptr, |
| ptr - (SRE_CHAR*) state->ptr)); |
| return ptr - (SRE_CHAR*) state->ptr; |
| } |
| |
| #if 0 /* not used in this release */ |
| LOCAL(int) |
| SRE(info)(SRE_STATE* state, SRE_CODE* pattern) |
| { |
| /* check if an SRE_OP_INFO block matches at the current position. |
| returns the number of SRE_CODE objects to skip if successful, 0 |
| if no match */ |
| |
| SRE_CHAR* end = (SRE_CHAR*) state->end; |
| SRE_CHAR* ptr = (SRE_CHAR*) state->ptr; |
| Py_ssize_t i; |
| |
| /* check minimal length */ |
| if (pattern[3] && end - ptr < pattern[3]) |
| return 0; |
| |
| /* check known prefix */ |
| if (pattern[2] & SRE_INFO_PREFIX && pattern[5] > 1) { |
| /* <length> <skip> <prefix data> <overlap data> */ |
| for (i = 0; i < pattern[5]; i++) |
| if ((SRE_CODE) ptr[i] != pattern[7 + i]) |
| return 0; |
| return pattern[0] + 2 * pattern[6]; |
| } |
| return pattern[0]; |
| } |
| #endif |
| |
| /* The macros below should be used to protect recursive SRE(match)() |
| * calls that *failed* and do *not* return immediately (IOW, those |
| * that will backtrack). Explaining: |
| * |
| * - Recursive SRE(match)() returned true: that's usually a success |
| * (besides atypical cases like ASSERT_NOT), therefore there's no |
| * reason to restore lastmark; |
| * |
| * - Recursive SRE(match)() returned false but the current SRE(match)() |
| * is returning to the caller: If the current SRE(match)() is the |
| * top function of the recursion, returning false will be a matching |
| * failure, and it doesn't matter where lastmark is pointing to. |
| * If it's *not* the top function, it will be a recursive SRE(match)() |
| * failure by itself, and the calling SRE(match)() will have to deal |
| * with the failure by the same rules explained here (it will restore |
| * lastmark by itself if necessary); |
| * |
| * - Recursive SRE(match)() returned false, and will continue the |
| * outside 'for' loop: must be protected when breaking, since the next |
| * OP could potentially depend on lastmark; |
| * |
| * - Recursive SRE(match)() returned false, and will be called again |
| * inside a local for/while loop: must be protected between each |
| * loop iteration, since the recursive SRE(match)() could do anything, |
| * and could potentially depend on lastmark. |
| * |
| * For more information, check the discussion at SF patch #712900. |
| */ |
| #define LASTMARK_SAVE() \ |
| do { \ |
| ctx->lastmark = state->lastmark; \ |
| ctx->lastindex = state->lastindex; \ |
| } while (0) |
| #define LASTMARK_RESTORE() \ |
| do { \ |
| state->lastmark = ctx->lastmark; \ |
| state->lastindex = ctx->lastindex; \ |
| } while (0) |
| |
| #define RETURN_ERROR(i) do { return i; } while(0) |
| #define RETURN_FAILURE do { ret = 0; goto exit; } while(0) |
| #define RETURN_SUCCESS do { ret = 1; goto exit; } while(0) |
| |
| #define RETURN_ON_ERROR(i) \ |
| do { if (i < 0) RETURN_ERROR(i); } while (0) |
| #define RETURN_ON_SUCCESS(i) \ |
| do { RETURN_ON_ERROR(i); if (i > 0) RETURN_SUCCESS; } while (0) |
| #define RETURN_ON_FAILURE(i) \ |
| do { RETURN_ON_ERROR(i); if (i == 0) RETURN_FAILURE; } while (0) |
| |
| #define SFY(x) #x |
| |
| #define DATA_STACK_ALLOC(state, type, ptr) \ |
| do { \ |
| alloc_pos = state->data_stack_base; \ |
| TRACE(("allocating %s in %" PY_FORMAT_SIZE_T "d " \ |
| "(%" PY_FORMAT_SIZE_T "d)\n", \ |
| SFY(type), alloc_pos, sizeof(type))); \ |
| if (sizeof(type) > state->data_stack_size - alloc_pos) { \ |
| int j = data_stack_grow(state, sizeof(type)); \ |
| if (j < 0) return j; \ |
| if (ctx_pos != -1) \ |
| DATA_STACK_LOOKUP_AT(state, SRE(match_context), ctx, ctx_pos); \ |
| } \ |
| ptr = (type*)(state->data_stack+alloc_pos); \ |
| state->data_stack_base += sizeof(type); \ |
| } while (0) |
| |
| #define DATA_STACK_LOOKUP_AT(state, type, ptr, pos) \ |
| do { \ |
| TRACE(("looking up %s at %" PY_FORMAT_SIZE_T "d\n", SFY(type), pos)); \ |
| ptr = (type*)(state->data_stack+pos); \ |
| } while (0) |
| |
| #define DATA_STACK_PUSH(state, data, size) \ |
| do { \ |
| TRACE(("copy data in %p to %" PY_FORMAT_SIZE_T "d " \ |
| "(%" PY_FORMAT_SIZE_T "d)\n", \ |
| data, state->data_stack_base, size)); \ |
| if (size > state->data_stack_size - state->data_stack_base) { \ |
| int j = data_stack_grow(state, size); \ |
| if (j < 0) return j; \ |
| if (ctx_pos != -1) \ |
| DATA_STACK_LOOKUP_AT(state, SRE(match_context), ctx, ctx_pos); \ |
| } \ |
| memcpy(state->data_stack+state->data_stack_base, data, size); \ |
| state->data_stack_base += size; \ |
| } while (0) |
| |
| #define DATA_STACK_POP(state, data, size, discard) \ |
| do { \ |
| TRACE(("copy data to %p from %" PY_FORMAT_SIZE_T "d " \ |
| "(%" PY_FORMAT_SIZE_T "d)\n", \ |
| data, state->data_stack_base-size, size)); \ |
| memcpy(data, state->data_stack+state->data_stack_base-size, size); \ |
| if (discard) \ |
| state->data_stack_base -= size; \ |
| } while (0) |
| |
| #define DATA_STACK_POP_DISCARD(state, size) \ |
| do { \ |
| TRACE(("discard data from %" PY_FORMAT_SIZE_T "d " \ |
| "(%" PY_FORMAT_SIZE_T "d)\n", \ |
| state->data_stack_base-size, size)); \ |
| state->data_stack_base -= size; \ |
| } while(0) |
| |
| #define DATA_PUSH(x) \ |
| DATA_STACK_PUSH(state, (x), sizeof(*(x))) |
| #define DATA_POP(x) \ |
| DATA_STACK_POP(state, (x), sizeof(*(x)), 1) |
| #define DATA_POP_DISCARD(x) \ |
| DATA_STACK_POP_DISCARD(state, sizeof(*(x))) |
| #define DATA_ALLOC(t,p) \ |
| DATA_STACK_ALLOC(state, t, p) |
| #define DATA_LOOKUP_AT(t,p,pos) \ |
| DATA_STACK_LOOKUP_AT(state,t,p,pos) |
| |
| #define MARK_PUSH(lastmark) \ |
| do if (lastmark > 0) { \ |
| i = lastmark; /* ctx->lastmark may change if reallocated */ \ |
| DATA_STACK_PUSH(state, state->mark, (i+1)*sizeof(void*)); \ |
| } while (0) |
| #define MARK_POP(lastmark) \ |
| do if (lastmark > 0) { \ |
| DATA_STACK_POP(state, state->mark, (lastmark+1)*sizeof(void*), 1); \ |
| } while (0) |
| #define MARK_POP_KEEP(lastmark) \ |
| do if (lastmark > 0) { \ |
| DATA_STACK_POP(state, state->mark, (lastmark+1)*sizeof(void*), 0); \ |
| } while (0) |
| #define MARK_POP_DISCARD(lastmark) \ |
| do if (lastmark > 0) { \ |
| DATA_STACK_POP_DISCARD(state, (lastmark+1)*sizeof(void*)); \ |
| } while (0) |
| |
| #define JUMP_NONE 0 |
| #define JUMP_MAX_UNTIL_1 1 |
| #define JUMP_MAX_UNTIL_2 2 |
| #define JUMP_MAX_UNTIL_3 3 |
| #define JUMP_MIN_UNTIL_1 4 |
| #define JUMP_MIN_UNTIL_2 5 |
| #define JUMP_MIN_UNTIL_3 6 |
| #define JUMP_REPEAT 7 |
| #define JUMP_REPEAT_ONE_1 8 |
| #define JUMP_REPEAT_ONE_2 9 |
| #define JUMP_MIN_REPEAT_ONE 10 |
| #define JUMP_BRANCH 11 |
| #define JUMP_ASSERT 12 |
| #define JUMP_ASSERT_NOT 13 |
| |
| #define DO_JUMPX(jumpvalue, jumplabel, nextpattern, matchall) \ |
| DATA_ALLOC(SRE(match_context), nextctx); \ |
| nextctx->last_ctx_pos = ctx_pos; \ |
| nextctx->jump = jumpvalue; \ |
| nextctx->pattern = nextpattern; \ |
| nextctx->match_all = matchall; \ |
| ctx_pos = alloc_pos; \ |
| ctx = nextctx; \ |
| goto entrance; \ |
| jumplabel: \ |
| while (0) /* gcc doesn't like labels at end of scopes */ \ |
| |
| #define DO_JUMP(jumpvalue, jumplabel, nextpattern) \ |
| DO_JUMPX(jumpvalue, jumplabel, nextpattern, ctx->match_all) |
| |
| #define DO_JUMP0(jumpvalue, jumplabel, nextpattern) \ |
| DO_JUMPX(jumpvalue, jumplabel, nextpattern, 0) |
| |
| typedef struct { |
| Py_ssize_t last_ctx_pos; |
| Py_ssize_t jump; |
| SRE_CHAR* ptr; |
| SRE_CODE* pattern; |
| Py_ssize_t count; |
| Py_ssize_t lastmark; |
| Py_ssize_t lastindex; |
| union { |
| SRE_CODE chr; |
| SRE_REPEAT* rep; |
| } u; |
| int match_all; |
| } SRE(match_context); |
| |
| /* check if string matches the given pattern. returns <0 for |
| error, 0 for failure, and 1 for success */ |
| LOCAL(Py_ssize_t) |
| SRE(match)(SRE_STATE* state, SRE_CODE* pattern, int match_all) |
| { |
| SRE_CHAR* end = (SRE_CHAR *)state->end; |
| Py_ssize_t alloc_pos, ctx_pos = -1; |
| Py_ssize_t i, ret = 0; |
| Py_ssize_t jump; |
| unsigned int sigcount=0; |
| |
| SRE(match_context)* ctx; |
| SRE(match_context)* nextctx; |
| |
| TRACE(("|%p|%p|ENTER\n", pattern, state->ptr)); |
| |
| DATA_ALLOC(SRE(match_context), ctx); |
| ctx->last_ctx_pos = -1; |
| ctx->jump = JUMP_NONE; |
| ctx->pattern = pattern; |
| ctx->match_all = match_all; |
| ctx_pos = alloc_pos; |
| |
| entrance: |
| |
| ctx->ptr = (SRE_CHAR *)state->ptr; |
| |
| if (ctx->pattern[0] == SRE_OP_INFO) { |
| /* optimization info block */ |
| /* <INFO> <1=skip> <2=flags> <3=min> ... */ |
| if (ctx->pattern[3] && (Py_uintptr_t)(end - ctx->ptr) < ctx->pattern[3]) { |
| TRACE(("reject (got %" PY_FORMAT_SIZE_T "d chars, " |
| "need %" PY_FORMAT_SIZE_T "d)\n", |
| end - ctx->ptr, (Py_ssize_t) ctx->pattern[3])); |
| RETURN_FAILURE; |
| } |
| ctx->pattern += ctx->pattern[1] + 1; |
| } |
| |
| for (;;) { |
| ++sigcount; |
| if ((0 == (sigcount & 0xfff)) && PyErr_CheckSignals()) |
| RETURN_ERROR(SRE_ERROR_INTERRUPTED); |
| |
| switch (*ctx->pattern++) { |
| |
| case SRE_OP_MARK: |
| /* set mark */ |
| /* <MARK> <gid> */ |
| TRACE(("|%p|%p|MARK %d\n", ctx->pattern, |
| ctx->ptr, ctx->pattern[0])); |
| i = ctx->pattern[0]; |
| if (i & 1) |
| state->lastindex = i/2 + 1; |
| if (i > state->lastmark) { |
| /* state->lastmark is the highest valid index in the |
| state->mark array. If it is increased by more than 1, |
| the intervening marks must be set to NULL to signal |
| that these marks have not been encountered. */ |
| Py_ssize_t j = state->lastmark + 1; |
| while (j < i) |
| state->mark[j++] = NULL; |
| state->lastmark = i; |
| } |
| state->mark[i] = ctx->ptr; |
| ctx->pattern++; |
| break; |
| |
| case SRE_OP_LITERAL: |
| /* match literal string */ |
| /* <LITERAL> <code> */ |
| TRACE(("|%p|%p|LITERAL %d\n", ctx->pattern, |
| ctx->ptr, *ctx->pattern)); |
| if (ctx->ptr >= end || (SRE_CODE) ctx->ptr[0] != ctx->pattern[0]) |
| RETURN_FAILURE; |
| ctx->pattern++; |
| ctx->ptr++; |
| break; |
| |
| case SRE_OP_NOT_LITERAL: |
| /* match anything that is not literal character */ |
| /* <NOT_LITERAL> <code> */ |
| TRACE(("|%p|%p|NOT_LITERAL %d\n", ctx->pattern, |
| ctx->ptr, *ctx->pattern)); |
| if (ctx->ptr >= end || (SRE_CODE) ctx->ptr[0] == ctx->pattern[0]) |
| RETURN_FAILURE; |
| ctx->pattern++; |
| ctx->ptr++; |
| break; |
| |
| case SRE_OP_SUCCESS: |
| /* end of pattern */ |
| TRACE(("|%p|%p|SUCCESS\n", ctx->pattern, ctx->ptr)); |
| if (!ctx->match_all || ctx->ptr == state->end) { |
| state->ptr = ctx->ptr; |
| RETURN_SUCCESS; |
| } |
| RETURN_FAILURE; |
| |
| case SRE_OP_AT: |
| /* match at given position */ |
| /* <AT> <code> */ |
| TRACE(("|%p|%p|AT %d\n", ctx->pattern, ctx->ptr, *ctx->pattern)); |
| if (!SRE(at)(state, ctx->ptr, *ctx->pattern)) |
| RETURN_FAILURE; |
| ctx->pattern++; |
| break; |
| |
| case SRE_OP_CATEGORY: |
| /* match at given category */ |
| /* <CATEGORY> <code> */ |
| TRACE(("|%p|%p|CATEGORY %d\n", ctx->pattern, |
| ctx->ptr, *ctx->pattern)); |
| if (ctx->ptr >= end || !sre_category(ctx->pattern[0], ctx->ptr[0])) |
| RETURN_FAILURE; |
| ctx->pattern++; |
| ctx->ptr++; |
| break; |
| |
| case SRE_OP_ANY: |
| /* match anything (except a newline) */ |
| /* <ANY> */ |
| TRACE(("|%p|%p|ANY\n", ctx->pattern, ctx->ptr)); |
| if (ctx->ptr >= end || SRE_IS_LINEBREAK(ctx->ptr[0])) |
| RETURN_FAILURE; |
| ctx->ptr++; |
| break; |
| |
| case SRE_OP_ANY_ALL: |
| /* match anything */ |
| /* <ANY_ALL> */ |
| TRACE(("|%p|%p|ANY_ALL\n", ctx->pattern, ctx->ptr)); |
| if (ctx->ptr >= end) |
| RETURN_FAILURE; |
| ctx->ptr++; |
| break; |
| |
| case SRE_OP_IN: |
| /* match set member (or non_member) */ |
| /* <IN> <skip> <set> */ |
| TRACE(("|%p|%p|IN\n", ctx->pattern, ctx->ptr)); |
| if (ctx->ptr >= end || |
| !SRE(charset)(state, ctx->pattern + 1, *ctx->ptr)) |
| RETURN_FAILURE; |
| ctx->pattern += ctx->pattern[0]; |
| ctx->ptr++; |
| break; |
| |
| case SRE_OP_LITERAL_IGNORE: |
| TRACE(("|%p|%p|LITERAL_IGNORE %d\n", |
| ctx->pattern, ctx->ptr, ctx->pattern[0])); |
| if (ctx->ptr >= end || |
| state->lower(*ctx->ptr) != state->lower(*ctx->pattern)) |
| RETURN_FAILURE; |
| ctx->pattern++; |
| ctx->ptr++; |
| break; |
| |
| case SRE_OP_NOT_LITERAL_IGNORE: |
| TRACE(("|%p|%p|NOT_LITERAL_IGNORE %d\n", |
| ctx->pattern, ctx->ptr, *ctx->pattern)); |
| if (ctx->ptr >= end || |
| state->lower(*ctx->ptr) == state->lower(*ctx->pattern)) |
| RETURN_FAILURE; |
| ctx->pattern++; |
| ctx->ptr++; |
| break; |
| |
| case SRE_OP_IN_IGNORE: |
| TRACE(("|%p|%p|IN_IGNORE\n", ctx->pattern, ctx->ptr)); |
| if (ctx->ptr >= end |
| || !SRE(charset)(state, ctx->pattern+1, |
| (SRE_CODE)state->lower(*ctx->ptr))) |
| RETURN_FAILURE; |
| ctx->pattern += ctx->pattern[0]; |
| ctx->ptr++; |
| break; |
| |
| case SRE_OP_JUMP: |
| case SRE_OP_INFO: |
| /* jump forward */ |
| /* <JUMP> <offset> */ |
| TRACE(("|%p|%p|JUMP %d\n", ctx->pattern, |
| ctx->ptr, ctx->pattern[0])); |
| ctx->pattern += ctx->pattern[0]; |
| break; |
| |
| case SRE_OP_BRANCH: |
| /* alternation */ |
| /* <BRANCH> <0=skip> code <JUMP> ... <NULL> */ |
| TRACE(("|%p|%p|BRANCH\n", ctx->pattern, ctx->ptr)); |
| LASTMARK_SAVE(); |
| ctx->u.rep = state->repeat; |
| if (ctx->u.rep) |
| MARK_PUSH(ctx->lastmark); |
| for (; ctx->pattern[0]; ctx->pattern += ctx->pattern[0]) { |
| if (ctx->pattern[1] == SRE_OP_LITERAL && |
| (ctx->ptr >= end || |
| (SRE_CODE) *ctx->ptr != ctx->pattern[2])) |
| continue; |
| if (ctx->pattern[1] == SRE_OP_IN && |
| (ctx->ptr >= end || |
| !SRE(charset)(state, ctx->pattern + 3, |
| (SRE_CODE) *ctx->ptr))) |
| continue; |
| state->ptr = ctx->ptr; |
| DO_JUMP(JUMP_BRANCH, jump_branch, ctx->pattern+1); |
| if (ret) { |
| if (ctx->u.rep) |
| MARK_POP_DISCARD(ctx->lastmark); |
| RETURN_ON_ERROR(ret); |
| RETURN_SUCCESS; |
| } |
| if (ctx->u.rep) |
| MARK_POP_KEEP(ctx->lastmark); |
| LASTMARK_RESTORE(); |
| } |
| if (ctx->u.rep) |
| MARK_POP_DISCARD(ctx->lastmark); |
| RETURN_FAILURE; |
| |
| case SRE_OP_REPEAT_ONE: |
| /* match repeated sequence (maximizing regexp) */ |
| |
| /* this operator only works if the repeated item is |
| exactly one character wide, and we're not already |
| collecting backtracking points. for other cases, |
| use the MAX_REPEAT operator */ |
| |
| /* <REPEAT_ONE> <skip> <1=min> <2=max> item <SUCCESS> tail */ |
| |
| TRACE(("|%p|%p|REPEAT_ONE %d %d\n", ctx->pattern, ctx->ptr, |
| ctx->pattern[1], ctx->pattern[2])); |
| |
| if ((Py_ssize_t) ctx->pattern[1] > end - ctx->ptr) |
| RETURN_FAILURE; /* cannot match */ |
| |
| state->ptr = ctx->ptr; |
| |
| ret = SRE(count)(state, ctx->pattern+3, ctx->pattern[2]); |
| RETURN_ON_ERROR(ret); |
| DATA_LOOKUP_AT(SRE(match_context), ctx, ctx_pos); |
| ctx->count = ret; |
| ctx->ptr += ctx->count; |
| |
| /* when we arrive here, count contains the number of |
| matches, and ctx->ptr points to the tail of the target |
| string. check if the rest of the pattern matches, |
| and backtrack if not. */ |
| |
| if (ctx->count < (Py_ssize_t) ctx->pattern[1]) |
| RETURN_FAILURE; |
| |
| if (ctx->pattern[ctx->pattern[0]] == SRE_OP_SUCCESS && |
| ctx->ptr == state->end) { |
| /* tail is empty. we're finished */ |
| state->ptr = ctx->ptr; |
| RETURN_SUCCESS; |
| } |
| |
| LASTMARK_SAVE(); |
| |
| if (ctx->pattern[ctx->pattern[0]] == SRE_OP_LITERAL) { |
| /* tail starts with a literal. skip positions where |
| the rest of the pattern cannot possibly match */ |
| ctx->u.chr = ctx->pattern[ctx->pattern[0]+1]; |
| for (;;) { |
| while (ctx->count >= (Py_ssize_t) ctx->pattern[1] && |
| (ctx->ptr >= end || *ctx->ptr != ctx->u.chr)) { |
| ctx->ptr--; |
| ctx->count--; |
| } |
| if (ctx->count < (Py_ssize_t) ctx->pattern[1]) |
| break; |
| state->ptr = ctx->ptr; |
| DO_JUMP(JUMP_REPEAT_ONE_1, jump_repeat_one_1, |
| ctx->pattern+ctx->pattern[0]); |
| if (ret) { |
| RETURN_ON_ERROR(ret); |
| RETURN_SUCCESS; |
| } |
| |
| LASTMARK_RESTORE(); |
| |
| ctx->ptr--; |
| ctx->count--; |
| } |
| |
| } else { |
| /* general case */ |
| while (ctx->count >= (Py_ssize_t) ctx->pattern[1]) { |
| state->ptr = ctx->ptr; |
| DO_JUMP(JUMP_REPEAT_ONE_2, jump_repeat_one_2, |
| ctx->pattern+ctx->pattern[0]); |
| if (ret) { |
| RETURN_ON_ERROR(ret); |
| RETURN_SUCCESS; |
| } |
| ctx->ptr--; |
| ctx->count--; |
| LASTMARK_RESTORE(); |
| } |
| } |
| RETURN_FAILURE; |
| |
| case SRE_OP_MIN_REPEAT_ONE: |
| /* match repeated sequence (minimizing regexp) */ |
| |
| /* this operator only works if the repeated item is |
| exactly one character wide, and we're not already |
| collecting backtracking points. for other cases, |
| use the MIN_REPEAT operator */ |
| |
| /* <MIN_REPEAT_ONE> <skip> <1=min> <2=max> item <SUCCESS> tail */ |
| |
| TRACE(("|%p|%p|MIN_REPEAT_ONE %d %d\n", ctx->pattern, ctx->ptr, |
| ctx->pattern[1], ctx->pattern[2])); |
| |
| if ((Py_ssize_t) ctx->pattern[1] > end - ctx->ptr) |
| RETURN_FAILURE; /* cannot match */ |
| |
| state->ptr = ctx->ptr; |
| |
| if (ctx->pattern[1] == 0) |
| ctx->count = 0; |
| else { |
| /* count using pattern min as the maximum */ |
| ret = SRE(count)(state, ctx->pattern+3, ctx->pattern[1]); |
| RETURN_ON_ERROR(ret); |
| DATA_LOOKUP_AT(SRE(match_context), ctx, ctx_pos); |
| if (ret < (Py_ssize_t) ctx->pattern[1]) |
| /* didn't match minimum number of times */ |
| RETURN_FAILURE; |
| /* advance past minimum matches of repeat */ |
| ctx->count = ret; |
| ctx->ptr += ctx->count; |
| } |
| |
| if (ctx->pattern[ctx->pattern[0]] == SRE_OP_SUCCESS && |
| (!match_all || ctx->ptr == state->end)) { |
| /* tail is empty. we're finished */ |
| state->ptr = ctx->ptr; |
| RETURN_SUCCESS; |
| |
| } else { |
| /* general case */ |
| LASTMARK_SAVE(); |
| while ((Py_ssize_t)ctx->pattern[2] == SRE_MAXREPEAT |
| || ctx->count <= (Py_ssize_t)ctx->pattern[2]) { |
| state->ptr = ctx->ptr; |
| DO_JUMP(JUMP_MIN_REPEAT_ONE,jump_min_repeat_one, |
| ctx->pattern+ctx->pattern[0]); |
| if (ret) { |
| RETURN_ON_ERROR(ret); |
| RETURN_SUCCESS; |
| } |
| state->ptr = ctx->ptr; |
| ret = SRE(count)(state, ctx->pattern+3, 1); |
| RETURN_ON_ERROR(ret); |
| DATA_LOOKUP_AT(SRE(match_context), ctx, ctx_pos); |
| if (ret == 0) |
| break; |
| assert(ret == 1); |
| ctx->ptr++; |
| ctx->count++; |
| LASTMARK_RESTORE(); |
| } |
| } |
| RETURN_FAILURE; |
| |
| case SRE_OP_REPEAT: |
| /* create repeat context. all the hard work is done |
| by the UNTIL operator (MAX_UNTIL, MIN_UNTIL) */ |
| /* <REPEAT> <skip> <1=min> <2=max> item <UNTIL> tail */ |
| TRACE(("|%p|%p|REPEAT %d %d\n", ctx->pattern, ctx->ptr, |
| ctx->pattern[1], ctx->pattern[2])); |
| |
| /* install new repeat context */ |
| ctx->u.rep = (SRE_REPEAT*) PyObject_MALLOC(sizeof(*ctx->u.rep)); |
| if (!ctx->u.rep) { |
| PyErr_NoMemory(); |
| RETURN_FAILURE; |
| } |
| ctx->u.rep->count = -1; |
| ctx->u.rep->pattern = ctx->pattern; |
| ctx->u.rep->prev = state->repeat; |
| ctx->u.rep->last_ptr = NULL; |
| state->repeat = ctx->u.rep; |
| |
| state->ptr = ctx->ptr; |
| DO_JUMP(JUMP_REPEAT, jump_repeat, ctx->pattern+ctx->pattern[0]); |
| state->repeat = ctx->u.rep->prev; |
| PyObject_FREE(ctx->u.rep); |
| |
| if (ret) { |
| RETURN_ON_ERROR(ret); |
| RETURN_SUCCESS; |
| } |
| RETURN_FAILURE; |
| |
| case SRE_OP_MAX_UNTIL: |
| /* maximizing repeat */ |
| /* <REPEAT> <skip> <1=min> <2=max> item <MAX_UNTIL> tail */ |
| |
| /* FIXME: we probably need to deal with zero-width |
| matches in here... */ |
| |
| ctx->u.rep = state->repeat; |
| if (!ctx->u.rep) |
| RETURN_ERROR(SRE_ERROR_STATE); |
| |
| state->ptr = ctx->ptr; |
| |
| ctx->count = ctx->u.rep->count+1; |
| |
| TRACE(("|%p|%p|MAX_UNTIL %" PY_FORMAT_SIZE_T "d\n", ctx->pattern, |
| ctx->ptr, ctx->count)); |
| |
| if (ctx->count < (Py_ssize_t) ctx->u.rep->pattern[1]) { |
| /* not enough matches */ |
| ctx->u.rep->count = ctx->count; |
| DO_JUMP(JUMP_MAX_UNTIL_1, jump_max_until_1, |
| ctx->u.rep->pattern+3); |
| if (ret) { |
| RETURN_ON_ERROR(ret); |
| RETURN_SUCCESS; |
| } |
| ctx->u.rep->count = ctx->count-1; |
| state->ptr = ctx->ptr; |
| RETURN_FAILURE; |
| } |
| |
| if ((ctx->count < (Py_ssize_t) ctx->u.rep->pattern[2] || |
| ctx->u.rep->pattern[2] == SRE_MAXREPEAT) && |
| state->ptr != ctx->u.rep->last_ptr) { |
| /* we may have enough matches, but if we can |
| match another item, do so */ |
| ctx->u.rep->count = ctx->count; |
| LASTMARK_SAVE(); |
| MARK_PUSH(ctx->lastmark); |
| /* zero-width match protection */ |
| DATA_PUSH(&ctx->u.rep->last_ptr); |
| ctx->u.rep->last_ptr = state->ptr; |
| DO_JUMP(JUMP_MAX_UNTIL_2, jump_max_until_2, |
| ctx->u.rep->pattern+3); |
| DATA_POP(&ctx->u.rep->last_ptr); |
| if (ret) { |
| MARK_POP_DISCARD(ctx->lastmark); |
| RETURN_ON_ERROR(ret); |
| RETURN_SUCCESS; |
| } |
| MARK_POP(ctx->lastmark); |
| LASTMARK_RESTORE(); |
| ctx->u.rep->count = ctx->count-1; |
| state->ptr = ctx->ptr; |
| } |
| |
| /* cannot match more repeated items here. make sure the |
| tail matches */ |
| state->repeat = ctx->u.rep->prev; |
| DO_JUMP(JUMP_MAX_UNTIL_3, jump_max_until_3, ctx->pattern); |
| RETURN_ON_SUCCESS(ret); |
| state->repeat = ctx->u.rep; |
| state->ptr = ctx->ptr; |
| RETURN_FAILURE; |
| |
| case SRE_OP_MIN_UNTIL: |
| /* minimizing repeat */ |
| /* <REPEAT> <skip> <1=min> <2=max> item <MIN_UNTIL> tail */ |
| |
| ctx->u.rep = state->repeat; |
| if (!ctx->u.rep) |
| RETURN_ERROR(SRE_ERROR_STATE); |
| |
| state->ptr = ctx->ptr; |
| |
| ctx->count = ctx->u.rep->count+1; |
| |
| TRACE(("|%p|%p|MIN_UNTIL %" PY_FORMAT_SIZE_T "d %p\n", ctx->pattern, |
| ctx->ptr, ctx->count, ctx->u.rep->pattern)); |
| |
| if (ctx->count < (Py_ssize_t) ctx->u.rep->pattern[1]) { |
| /* not enough matches */ |
| ctx->u.rep->count = ctx->count; |
| DO_JUMP(JUMP_MIN_UNTIL_1, jump_min_until_1, |
| ctx->u.rep->pattern+3); |
| if (ret) { |
| RETURN_ON_ERROR(ret); |
| RETURN_SUCCESS; |
| } |
| ctx->u.rep->count = ctx->count-1; |
| state->ptr = ctx->ptr; |
| RETURN_FAILURE; |
| } |
| |
| LASTMARK_SAVE(); |
| |
| /* see if the tail matches */ |
| state->repeat = ctx->u.rep->prev; |
| DO_JUMP(JUMP_MIN_UNTIL_2, jump_min_until_2, ctx->pattern); |
| if (ret) { |
| RETURN_ON_ERROR(ret); |
| RETURN_SUCCESS; |
| } |
| |
| state->repeat = ctx->u.rep; |
| state->ptr = ctx->ptr; |
| |
| LASTMARK_RESTORE(); |
| |
| if ((ctx->count >= (Py_ssize_t) ctx->u.rep->pattern[2] |
| && ctx->u.rep->pattern[2] != SRE_MAXREPEAT) || |
| state->ptr == ctx->u.rep->last_ptr) |
| RETURN_FAILURE; |
| |
| ctx->u.rep->count = ctx->count; |
| /* zero-width match protection */ |
| DATA_PUSH(&ctx->u.rep->last_ptr); |
| ctx->u.rep->last_ptr = state->ptr; |
| DO_JUMP(JUMP_MIN_UNTIL_3,jump_min_until_3, |
| ctx->u.rep->pattern+3); |
| DATA_POP(&ctx->u.rep->last_ptr); |
| if (ret) { |
| RETURN_ON_ERROR(ret); |
| RETURN_SUCCESS; |
| } |
| ctx->u.rep->count = ctx->count-1; |
| state->ptr = ctx->ptr; |
| RETURN_FAILURE; |
| |
| case SRE_OP_GROUPREF: |
| /* match backreference */ |
| TRACE(("|%p|%p|GROUPREF %d\n", ctx->pattern, |
| ctx->ptr, ctx->pattern[0])); |
| i = ctx->pattern[0]; |
| { |
| Py_ssize_t groupref = i+i; |
| if (groupref >= state->lastmark) { |
| RETURN_FAILURE; |
| } else { |
| SRE_CHAR* p = (SRE_CHAR*) state->mark[groupref]; |
| SRE_CHAR* e = (SRE_CHAR*) state->mark[groupref+1]; |
| if (!p || !e || e < p) |
| RETURN_FAILURE; |
| while (p < e) { |
| if (ctx->ptr >= end || *ctx->ptr != *p) |
| RETURN_FAILURE; |
| p++; |
| ctx->ptr++; |
| } |
| } |
| } |
| ctx->pattern++; |
| break; |
| |
| case SRE_OP_GROUPREF_IGNORE: |
| /* match backreference */ |
| TRACE(("|%p|%p|GROUPREF_IGNORE %d\n", ctx->pattern, |
| ctx->ptr, ctx->pattern[0])); |
| i = ctx->pattern[0]; |
| { |
| Py_ssize_t groupref = i+i; |
| if (groupref >= state->lastmark) { |
| RETURN_FAILURE; |
| } else { |
| SRE_CHAR* p = (SRE_CHAR*) state->mark[groupref]; |
| SRE_CHAR* e = (SRE_CHAR*) state->mark[groupref+1]; |
| if (!p || !e || e < p) |
| RETURN_FAILURE; |
| while (p < e) { |
| if (ctx->ptr >= end || |
| state->lower(*ctx->ptr) != state->lower(*p)) |
| RETURN_FAILURE; |
| p++; |
| ctx->ptr++; |
| } |
| } |
| } |
| ctx->pattern++; |
| break; |
| |
| case SRE_OP_GROUPREF_EXISTS: |
| TRACE(("|%p|%p|GROUPREF_EXISTS %d\n", ctx->pattern, |
| ctx->ptr, ctx->pattern[0])); |
| /* <GROUPREF_EXISTS> <group> <skip> codeyes <JUMP> codeno ... */ |
| i = ctx->pattern[0]; |
| { |
| Py_ssize_t groupref = i+i; |
| if (groupref >= state->lastmark) { |
| ctx->pattern += ctx->pattern[1]; |
| break; |
| } else { |
| SRE_CHAR* p = (SRE_CHAR*) state->mark[groupref]; |
| SRE_CHAR* e = (SRE_CHAR*) state->mark[groupref+1]; |
| if (!p || !e || e < p) { |
| ctx->pattern += ctx->pattern[1]; |
| break; |
| } |
| } |
| } |
| ctx->pattern += 2; |
| break; |
| |
| case SRE_OP_ASSERT: |
| /* assert subpattern */ |
| /* <ASSERT> <skip> <back> <pattern> */ |
| TRACE(("|%p|%p|ASSERT %d\n", ctx->pattern, |
| ctx->ptr, ctx->pattern[1])); |
| if (ctx->ptr - (SRE_CHAR *)state->beginning < (Py_ssize_t)ctx->pattern[1]) |
| RETURN_FAILURE; |
| state->ptr = ctx->ptr - ctx->pattern[1]; |
| DO_JUMP0(JUMP_ASSERT, jump_assert, ctx->pattern+2); |
| RETURN_ON_FAILURE(ret); |
| ctx->pattern += ctx->pattern[0]; |
| break; |
| |
| case SRE_OP_ASSERT_NOT: |
| /* assert not subpattern */ |
| /* <ASSERT_NOT> <skip> <back> <pattern> */ |
| TRACE(("|%p|%p|ASSERT_NOT %d\n", ctx->pattern, |
| ctx->ptr, ctx->pattern[1])); |
| if (ctx->ptr - (SRE_CHAR *)state->beginning >= (Py_ssize_t)ctx->pattern[1]) { |
| state->ptr = ctx->ptr - ctx->pattern[1]; |
| DO_JUMP0(JUMP_ASSERT_NOT, jump_assert_not, ctx->pattern+2); |
| if (ret) { |
| RETURN_ON_ERROR(ret); |
| RETURN_FAILURE; |
| } |
| } |
| ctx->pattern += ctx->pattern[0]; |
| break; |
| |
| case SRE_OP_FAILURE: |
| /* immediate failure */ |
| TRACE(("|%p|%p|FAILURE\n", ctx->pattern, ctx->ptr)); |
| RETURN_FAILURE; |
| |
| default: |
| TRACE(("|%p|%p|UNKNOWN %d\n", ctx->pattern, ctx->ptr, |
| ctx->pattern[-1])); |
| RETURN_ERROR(SRE_ERROR_ILLEGAL); |
| } |
| } |
| |
| exit: |
| ctx_pos = ctx->last_ctx_pos; |
| jump = ctx->jump; |
| DATA_POP_DISCARD(ctx); |
| if (ctx_pos == -1) |
| return ret; |
| DATA_LOOKUP_AT(SRE(match_context), ctx, ctx_pos); |
| |
| switch (jump) { |
| case JUMP_MAX_UNTIL_2: |
| TRACE(("|%p|%p|JUMP_MAX_UNTIL_2\n", ctx->pattern, ctx->ptr)); |
| goto jump_max_until_2; |
| case JUMP_MAX_UNTIL_3: |
| TRACE(("|%p|%p|JUMP_MAX_UNTIL_3\n", ctx->pattern, ctx->ptr)); |
| goto jump_max_until_3; |
| case JUMP_MIN_UNTIL_2: |
| TRACE(("|%p|%p|JUMP_MIN_UNTIL_2\n", ctx->pattern, ctx->ptr)); |
| goto jump_min_until_2; |
| case JUMP_MIN_UNTIL_3: |
| TRACE(("|%p|%p|JUMP_MIN_UNTIL_3\n", ctx->pattern, ctx->ptr)); |
| goto jump_min_until_3; |
| case JUMP_BRANCH: |
| TRACE(("|%p|%p|JUMP_BRANCH\n", ctx->pattern, ctx->ptr)); |
| goto jump_branch; |
| case JUMP_MAX_UNTIL_1: |
| TRACE(("|%p|%p|JUMP_MAX_UNTIL_1\n", ctx->pattern, ctx->ptr)); |
| goto jump_max_until_1; |
| case JUMP_MIN_UNTIL_1: |
| TRACE(("|%p|%p|JUMP_MIN_UNTIL_1\n", ctx->pattern, ctx->ptr)); |
| goto jump_min_until_1; |
| case JUMP_REPEAT: |
| TRACE(("|%p|%p|JUMP_REPEAT\n", ctx->pattern, ctx->ptr)); |
| goto jump_repeat; |
| case JUMP_REPEAT_ONE_1: |
| TRACE(("|%p|%p|JUMP_REPEAT_ONE_1\n", ctx->pattern, ctx->ptr)); |
| goto jump_repeat_one_1; |
| case JUMP_REPEAT_ONE_2: |
| TRACE(("|%p|%p|JUMP_REPEAT_ONE_2\n", ctx->pattern, ctx->ptr)); |
| goto jump_repeat_one_2; |
| case JUMP_MIN_REPEAT_ONE: |
| TRACE(("|%p|%p|JUMP_MIN_REPEAT_ONE\n", ctx->pattern, ctx->ptr)); |
| goto jump_min_repeat_one; |
| case JUMP_ASSERT: |
| TRACE(("|%p|%p|JUMP_ASSERT\n", ctx->pattern, ctx->ptr)); |
| goto jump_assert; |
| case JUMP_ASSERT_NOT: |
| TRACE(("|%p|%p|JUMP_ASSERT_NOT\n", ctx->pattern, ctx->ptr)); |
| goto jump_assert_not; |
| case JUMP_NONE: |
| TRACE(("|%p|%p|RETURN %" PY_FORMAT_SIZE_T "d\n", ctx->pattern, |
| ctx->ptr, ret)); |
| break; |
| } |
| |
| return ret; /* should never get here */ |
| } |
| |
| LOCAL(Py_ssize_t) |
| SRE(search)(SRE_STATE* state, SRE_CODE* pattern) |
| { |
| SRE_CHAR* ptr = (SRE_CHAR *)state->start; |
| SRE_CHAR* end = (SRE_CHAR *)state->end; |
| Py_ssize_t status = 0; |
| Py_ssize_t prefix_len = 0; |
| Py_ssize_t prefix_skip = 0; |
| SRE_CODE* prefix = NULL; |
| SRE_CODE* charset = NULL; |
| SRE_CODE* overlap = NULL; |
| int flags = 0; |
| |
| if (ptr > end) |
| return 0; |
| |
| if (pattern[0] == SRE_OP_INFO) { |
| /* optimization info block */ |
| /* <INFO> <1=skip> <2=flags> <3=min> <4=max> <5=prefix info> */ |
| |
| flags = pattern[2]; |
| |
| if (pattern[3] && end - ptr < (Py_ssize_t)pattern[3]) { |
| TRACE(("reject (got %u chars, need %u)\n", |
| (unsigned int)(end - ptr), pattern[3])); |
| return 0; |
| } |
| if (pattern[3] > 1) { |
| /* adjust end point (but make sure we leave at least one |
| character in there, so literal search will work) */ |
| end -= pattern[3] - 1; |
| if (end <= ptr) |
| end = ptr; |
| } |
| |
| if (flags & SRE_INFO_PREFIX) { |
| /* pattern starts with a known prefix */ |
| /* <length> <skip> <prefix data> <overlap data> */ |
| prefix_len = pattern[5]; |
| prefix_skip = pattern[6]; |
| prefix = pattern + 7; |
| overlap = prefix + prefix_len - 1; |
| } else if (flags & SRE_INFO_CHARSET) |
| /* pattern starts with a character from a known set */ |
| /* <charset> */ |
| charset = pattern + 5; |
| |
| pattern += 1 + pattern[1]; |
| } |
| |
| TRACE(("prefix = %p %" PY_FORMAT_SIZE_T "d %" PY_FORMAT_SIZE_T "d\n", |
| prefix, prefix_len, prefix_skip)); |
| TRACE(("charset = %p\n", charset)); |
| |
| #if defined(USE_FAST_SEARCH) |
| if (prefix_len > 1) { |
| /* pattern starts with a known prefix. use the overlap |
| table to skip forward as fast as we possibly can */ |
| Py_ssize_t i = 0; |
| |
| end = (SRE_CHAR *)state->end; |
| if (prefix_len > end - ptr) |
| return 0; |
| #if SIZEOF_SRE_CHAR < 4 |
| for (i = 0; i < prefix_len; i++) |
| if ((SRE_CODE)(SRE_CHAR) prefix[i] != prefix[i]) |
| return 0; /* literal can't match: doesn't fit in char width */ |
| #endif |
| while (ptr < end) { |
| SRE_CHAR c = (SRE_CHAR) prefix[0]; |
| while (*ptr++ != c) { |
| if (ptr >= end) |
| return 0; |
| } |
| if (ptr >= end) |
| return 0; |
| |
| i = 1; |
| do { |
| if (*ptr == (SRE_CHAR) prefix[i]) { |
| if (++i != prefix_len) { |
| if (++ptr >= end) |
| return 0; |
| continue; |
| } |
| /* found a potential match */ |
| TRACE(("|%p|%p|SEARCH SCAN\n", pattern, ptr)); |
| state->start = ptr - (prefix_len - 1); |
| state->ptr = ptr - (prefix_len - prefix_skip - 1); |
| if (flags & SRE_INFO_LITERAL) |
| return 1; /* we got all of it */ |
| status = SRE(match)(state, pattern + 2*prefix_skip, 0); |
| if (status != 0) |
| return status; |
| /* close but no cigar -- try again */ |
| if (++ptr >= end) |
| return 0; |
| } |
| i = overlap[i]; |
| } while (i != 0); |
| } |
| return 0; |
| } |
| #endif |
| |
| if (pattern[0] == SRE_OP_LITERAL) { |
| /* pattern starts with a literal character. this is used |
| for short prefixes, and if fast search is disabled */ |
| SRE_CHAR c = (SRE_CHAR) pattern[1]; |
| #if SIZEOF_SRE_CHAR < 4 |
| if ((SRE_CODE) c != pattern[1]) |
| return 0; /* literal can't match: doesn't fit in char width */ |
| #endif |
| end = (SRE_CHAR *)state->end; |
| while (ptr < end) { |
| while (*ptr != c) { |
| if (++ptr >= end) |
| return 0; |
| } |
| TRACE(("|%p|%p|SEARCH LITERAL\n", pattern, ptr)); |
| state->start = ptr; |
| state->ptr = ++ptr; |
| if (flags & SRE_INFO_LITERAL) |
| return 1; /* we got all of it */ |
| status = SRE(match)(state, pattern + 2, 0); |
| if (status != 0) |
| break; |
| } |
| } else if (charset) { |
| /* pattern starts with a character from a known set */ |
| end = (SRE_CHAR *)state->end; |
| for (;;) { |
| while (ptr < end && !SRE(charset)(state, charset, *ptr)) |
| ptr++; |
| if (ptr >= end) |
| return 0; |
| TRACE(("|%p|%p|SEARCH CHARSET\n", pattern, ptr)); |
| state->start = ptr; |
| state->ptr = ptr; |
| status = SRE(match)(state, pattern, 0); |
| if (status != 0) |
| break; |
| ptr++; |
| } |
| } else { |
| /* general case */ |
| assert(ptr <= end); |
| while (1) { |
| TRACE(("|%p|%p|SEARCH\n", pattern, ptr)); |
| state->start = state->ptr = ptr; |
| status = SRE(match)(state, pattern, 0); |
| if (status != 0 || ptr >= end) |
| break; |
| ptr++; |
| } |
| } |
| |
| return status; |
| } |
| |
| #undef SRE_CHAR |
| #undef SIZEOF_SRE_CHAR |
| #undef SRE |
| |
| /* vim:ts=4:sw=4:et |
| */ |