| |
| /* Thread module */ |
| /* Interface to Sjoerd's portable C thread library */ |
| |
| #include "Python.h" |
| #include "pycore_pylifecycle.h" |
| #include "pycore_interp.h" // _PyInterpreterState.num_threads |
| #include "pycore_pystate.h" // _PyThreadState_Init() |
| #include <stddef.h> // offsetof() |
| |
| static PyObject *ThreadError; |
| static PyObject *str_dict; |
| |
| _Py_IDENTIFIER(stderr); |
| _Py_IDENTIFIER(flush); |
| |
| /* Lock objects */ |
| |
| typedef struct { |
| PyObject_HEAD |
| PyThread_type_lock lock_lock; |
| PyObject *in_weakreflist; |
| char locked; /* for sanity checking */ |
| } lockobject; |
| |
| static void |
| lock_dealloc(lockobject *self) |
| { |
| if (self->in_weakreflist != NULL) |
| PyObject_ClearWeakRefs((PyObject *) self); |
| if (self->lock_lock != NULL) { |
| /* Unlock the lock so it's safe to free it */ |
| if (self->locked) |
| PyThread_release_lock(self->lock_lock); |
| PyThread_free_lock(self->lock_lock); |
| } |
| PyObject_Del(self); |
| } |
| |
| /* Helper to acquire an interruptible lock with a timeout. If the lock acquire |
| * is interrupted, signal handlers are run, and if they raise an exception, |
| * PY_LOCK_INTR is returned. Otherwise, PY_LOCK_ACQUIRED or PY_LOCK_FAILURE |
| * are returned, depending on whether the lock can be acquired within the |
| * timeout. |
| */ |
| static PyLockStatus |
| acquire_timed(PyThread_type_lock lock, _PyTime_t timeout) |
| { |
| PyLockStatus r; |
| _PyTime_t endtime = 0; |
| _PyTime_t microseconds; |
| |
| if (timeout > 0) |
| endtime = _PyTime_GetMonotonicClock() + timeout; |
| |
| do { |
| microseconds = _PyTime_AsMicroseconds(timeout, _PyTime_ROUND_CEILING); |
| |
| /* first a simple non-blocking try without releasing the GIL */ |
| r = PyThread_acquire_lock_timed(lock, 0, 0); |
| if (r == PY_LOCK_FAILURE && microseconds != 0) { |
| Py_BEGIN_ALLOW_THREADS |
| r = PyThread_acquire_lock_timed(lock, microseconds, 1); |
| Py_END_ALLOW_THREADS |
| } |
| |
| if (r == PY_LOCK_INTR) { |
| /* Run signal handlers if we were interrupted. Propagate |
| * exceptions from signal handlers, such as KeyboardInterrupt, by |
| * passing up PY_LOCK_INTR. */ |
| if (Py_MakePendingCalls() < 0) { |
| return PY_LOCK_INTR; |
| } |
| |
| /* If we're using a timeout, recompute the timeout after processing |
| * signals, since those can take time. */ |
| if (timeout > 0) { |
| timeout = endtime - _PyTime_GetMonotonicClock(); |
| |
| /* Check for negative values, since those mean block forever. |
| */ |
| if (timeout < 0) { |
| r = PY_LOCK_FAILURE; |
| } |
| } |
| } |
| } while (r == PY_LOCK_INTR); /* Retry if we were interrupted. */ |
| |
| return r; |
| } |
| |
| static int |
| lock_acquire_parse_args(PyObject *args, PyObject *kwds, |
| _PyTime_t *timeout) |
| { |
| char *kwlist[] = {"blocking", "timeout", NULL}; |
| int blocking = 1; |
| PyObject *timeout_obj = NULL; |
| const _PyTime_t unset_timeout = _PyTime_FromSeconds(-1); |
| |
| *timeout = unset_timeout ; |
| |
| if (!PyArg_ParseTupleAndKeywords(args, kwds, "|iO:acquire", kwlist, |
| &blocking, &timeout_obj)) |
| return -1; |
| |
| if (timeout_obj |
| && _PyTime_FromSecondsObject(timeout, |
| timeout_obj, _PyTime_ROUND_TIMEOUT) < 0) |
| return -1; |
| |
| if (!blocking && *timeout != unset_timeout ) { |
| PyErr_SetString(PyExc_ValueError, |
| "can't specify a timeout for a non-blocking call"); |
| return -1; |
| } |
| if (*timeout < 0 && *timeout != unset_timeout) { |
| PyErr_SetString(PyExc_ValueError, |
| "timeout value must be positive"); |
| return -1; |
| } |
| if (!blocking) |
| *timeout = 0; |
| else if (*timeout != unset_timeout) { |
| _PyTime_t microseconds; |
| |
| microseconds = _PyTime_AsMicroseconds(*timeout, _PyTime_ROUND_TIMEOUT); |
| if (microseconds >= PY_TIMEOUT_MAX) { |
| PyErr_SetString(PyExc_OverflowError, |
| "timeout value is too large"); |
| return -1; |
| } |
| } |
| return 0; |
| } |
| |
| static PyObject * |
| lock_PyThread_acquire_lock(lockobject *self, PyObject *args, PyObject *kwds) |
| { |
| _PyTime_t timeout; |
| PyLockStatus r; |
| |
| if (lock_acquire_parse_args(args, kwds, &timeout) < 0) |
| return NULL; |
| |
| r = acquire_timed(self->lock_lock, timeout); |
| if (r == PY_LOCK_INTR) { |
| return NULL; |
| } |
| |
| if (r == PY_LOCK_ACQUIRED) |
| self->locked = 1; |
| return PyBool_FromLong(r == PY_LOCK_ACQUIRED); |
| } |
| |
| PyDoc_STRVAR(acquire_doc, |
| "acquire(blocking=True, timeout=-1) -> bool\n\ |
| (acquire_lock() is an obsolete synonym)\n\ |
| \n\ |
| Lock the lock. Without argument, this blocks if the lock is already\n\ |
| locked (even by the same thread), waiting for another thread to release\n\ |
| the lock, and return True once the lock is acquired.\n\ |
| With an argument, this will only block if the argument is true,\n\ |
| and the return value reflects whether the lock is acquired.\n\ |
| The blocking operation is interruptible."); |
| |
| static PyObject * |
| lock_PyThread_release_lock(lockobject *self, PyObject *Py_UNUSED(ignored)) |
| { |
| /* Sanity check: the lock must be locked */ |
| if (!self->locked) { |
| PyErr_SetString(ThreadError, "release unlocked lock"); |
| return NULL; |
| } |
| |
| PyThread_release_lock(self->lock_lock); |
| self->locked = 0; |
| Py_RETURN_NONE; |
| } |
| |
| PyDoc_STRVAR(release_doc, |
| "release()\n\ |
| (release_lock() is an obsolete synonym)\n\ |
| \n\ |
| Release the lock, allowing another thread that is blocked waiting for\n\ |
| the lock to acquire the lock. The lock must be in the locked state,\n\ |
| but it needn't be locked by the same thread that unlocks it."); |
| |
| static PyObject * |
| lock_locked_lock(lockobject *self, PyObject *Py_UNUSED(ignored)) |
| { |
| return PyBool_FromLong((long)self->locked); |
| } |
| |
| PyDoc_STRVAR(locked_doc, |
| "locked() -> bool\n\ |
| (locked_lock() is an obsolete synonym)\n\ |
| \n\ |
| Return whether the lock is in the locked state."); |
| |
| static PyObject * |
| lock_repr(lockobject *self) |
| { |
| return PyUnicode_FromFormat("<%s %s object at %p>", |
| self->locked ? "locked" : "unlocked", Py_TYPE(self)->tp_name, self); |
| } |
| |
| #ifdef HAVE_FORK |
| static PyObject * |
| lock__at_fork_reinit(lockobject *self, PyObject *Py_UNUSED(args)) |
| { |
| if (_PyThread_at_fork_reinit(&self->lock_lock) < 0) { |
| PyErr_SetString(ThreadError, "failed to reinitialize lock at fork"); |
| return NULL; |
| } |
| |
| self->locked = 0; |
| |
| Py_RETURN_NONE; |
| } |
| #endif /* HAVE_FORK */ |
| |
| |
| static PyMethodDef lock_methods[] = { |
| {"acquire_lock", (PyCFunction)(void(*)(void))lock_PyThread_acquire_lock, |
| METH_VARARGS | METH_KEYWORDS, acquire_doc}, |
| {"acquire", (PyCFunction)(void(*)(void))lock_PyThread_acquire_lock, |
| METH_VARARGS | METH_KEYWORDS, acquire_doc}, |
| {"release_lock", (PyCFunction)lock_PyThread_release_lock, |
| METH_NOARGS, release_doc}, |
| {"release", (PyCFunction)lock_PyThread_release_lock, |
| METH_NOARGS, release_doc}, |
| {"locked_lock", (PyCFunction)lock_locked_lock, |
| METH_NOARGS, locked_doc}, |
| {"locked", (PyCFunction)lock_locked_lock, |
| METH_NOARGS, locked_doc}, |
| {"__enter__", (PyCFunction)(void(*)(void))lock_PyThread_acquire_lock, |
| METH_VARARGS | METH_KEYWORDS, acquire_doc}, |
| {"__exit__", (PyCFunction)lock_PyThread_release_lock, |
| METH_VARARGS, release_doc}, |
| #ifdef HAVE_FORK |
| {"_at_fork_reinit", (PyCFunction)lock__at_fork_reinit, |
| METH_NOARGS, NULL}, |
| #endif |
| {NULL, NULL} /* sentinel */ |
| }; |
| |
| static PyTypeObject Locktype = { |
| PyVarObject_HEAD_INIT(&PyType_Type, 0) |
| "_thread.lock", /*tp_name*/ |
| sizeof(lockobject), /*tp_basicsize*/ |
| 0, /*tp_itemsize*/ |
| /* methods */ |
| (destructor)lock_dealloc, /*tp_dealloc*/ |
| 0, /*tp_vectorcall_offset*/ |
| 0, /*tp_getattr*/ |
| 0, /*tp_setattr*/ |
| 0, /*tp_as_async*/ |
| (reprfunc)lock_repr, /*tp_repr*/ |
| 0, /*tp_as_number*/ |
| 0, /*tp_as_sequence*/ |
| 0, /*tp_as_mapping*/ |
| 0, /*tp_hash*/ |
| 0, /*tp_call*/ |
| 0, /*tp_str*/ |
| 0, /*tp_getattro*/ |
| 0, /*tp_setattro*/ |
| 0, /*tp_as_buffer*/ |
| Py_TPFLAGS_DEFAULT, /*tp_flags*/ |
| 0, /*tp_doc*/ |
| 0, /*tp_traverse*/ |
| 0, /*tp_clear*/ |
| 0, /*tp_richcompare*/ |
| offsetof(lockobject, in_weakreflist), /*tp_weaklistoffset*/ |
| 0, /*tp_iter*/ |
| 0, /*tp_iternext*/ |
| lock_methods, /*tp_methods*/ |
| }; |
| |
| /* Recursive lock objects */ |
| |
| typedef struct { |
| PyObject_HEAD |
| PyThread_type_lock rlock_lock; |
| unsigned long rlock_owner; |
| unsigned long rlock_count; |
| PyObject *in_weakreflist; |
| } rlockobject; |
| |
| static void |
| rlock_dealloc(rlockobject *self) |
| { |
| if (self->in_weakreflist != NULL) |
| PyObject_ClearWeakRefs((PyObject *) self); |
| /* self->rlock_lock can be NULL if PyThread_allocate_lock() failed |
| in rlock_new() */ |
| if (self->rlock_lock != NULL) { |
| /* Unlock the lock so it's safe to free it */ |
| if (self->rlock_count > 0) |
| PyThread_release_lock(self->rlock_lock); |
| |
| PyThread_free_lock(self->rlock_lock); |
| } |
| Py_TYPE(self)->tp_free(self); |
| } |
| |
| static PyObject * |
| rlock_acquire(rlockobject *self, PyObject *args, PyObject *kwds) |
| { |
| _PyTime_t timeout; |
| unsigned long tid; |
| PyLockStatus r = PY_LOCK_ACQUIRED; |
| |
| if (lock_acquire_parse_args(args, kwds, &timeout) < 0) |
| return NULL; |
| |
| tid = PyThread_get_thread_ident(); |
| if (self->rlock_count > 0 && tid == self->rlock_owner) { |
| unsigned long count = self->rlock_count + 1; |
| if (count <= self->rlock_count) { |
| PyErr_SetString(PyExc_OverflowError, |
| "Internal lock count overflowed"); |
| return NULL; |
| } |
| self->rlock_count = count; |
| Py_RETURN_TRUE; |
| } |
| r = acquire_timed(self->rlock_lock, timeout); |
| if (r == PY_LOCK_ACQUIRED) { |
| assert(self->rlock_count == 0); |
| self->rlock_owner = tid; |
| self->rlock_count = 1; |
| } |
| else if (r == PY_LOCK_INTR) { |
| return NULL; |
| } |
| |
| return PyBool_FromLong(r == PY_LOCK_ACQUIRED); |
| } |
| |
| PyDoc_STRVAR(rlock_acquire_doc, |
| "acquire(blocking=True) -> bool\n\ |
| \n\ |
| Lock the lock. `blocking` indicates whether we should wait\n\ |
| for the lock to be available or not. If `blocking` is False\n\ |
| and another thread holds the lock, the method will return False\n\ |
| immediately. If `blocking` is True and another thread holds\n\ |
| the lock, the method will wait for the lock to be released,\n\ |
| take it and then return True.\n\ |
| (note: the blocking operation is interruptible.)\n\ |
| \n\ |
| In all other cases, the method will return True immediately.\n\ |
| Precisely, if the current thread already holds the lock, its\n\ |
| internal counter is simply incremented. If nobody holds the lock,\n\ |
| the lock is taken and its internal counter initialized to 1."); |
| |
| static PyObject * |
| rlock_release(rlockobject *self, PyObject *Py_UNUSED(ignored)) |
| { |
| unsigned long tid = PyThread_get_thread_ident(); |
| |
| if (self->rlock_count == 0 || self->rlock_owner != tid) { |
| PyErr_SetString(PyExc_RuntimeError, |
| "cannot release un-acquired lock"); |
| return NULL; |
| } |
| if (--self->rlock_count == 0) { |
| self->rlock_owner = 0; |
| PyThread_release_lock(self->rlock_lock); |
| } |
| Py_RETURN_NONE; |
| } |
| |
| PyDoc_STRVAR(rlock_release_doc, |
| "release()\n\ |
| \n\ |
| Release the lock, allowing another thread that is blocked waiting for\n\ |
| the lock to acquire the lock. The lock must be in the locked state,\n\ |
| and must be locked by the same thread that unlocks it; otherwise a\n\ |
| `RuntimeError` is raised.\n\ |
| \n\ |
| Do note that if the lock was acquire()d several times in a row by the\n\ |
| current thread, release() needs to be called as many times for the lock\n\ |
| to be available for other threads."); |
| |
| static PyObject * |
| rlock_acquire_restore(rlockobject *self, PyObject *args) |
| { |
| unsigned long owner; |
| unsigned long count; |
| int r = 1; |
| |
| if (!PyArg_ParseTuple(args, "(kk):_acquire_restore", &count, &owner)) |
| return NULL; |
| |
| if (!PyThread_acquire_lock(self->rlock_lock, 0)) { |
| Py_BEGIN_ALLOW_THREADS |
| r = PyThread_acquire_lock(self->rlock_lock, 1); |
| Py_END_ALLOW_THREADS |
| } |
| if (!r) { |
| PyErr_SetString(ThreadError, "couldn't acquire lock"); |
| return NULL; |
| } |
| assert(self->rlock_count == 0); |
| self->rlock_owner = owner; |
| self->rlock_count = count; |
| Py_RETURN_NONE; |
| } |
| |
| PyDoc_STRVAR(rlock_acquire_restore_doc, |
| "_acquire_restore(state) -> None\n\ |
| \n\ |
| For internal use by `threading.Condition`."); |
| |
| static PyObject * |
| rlock_release_save(rlockobject *self, PyObject *Py_UNUSED(ignored)) |
| { |
| unsigned long owner; |
| unsigned long count; |
| |
| if (self->rlock_count == 0) { |
| PyErr_SetString(PyExc_RuntimeError, |
| "cannot release un-acquired lock"); |
| return NULL; |
| } |
| |
| owner = self->rlock_owner; |
| count = self->rlock_count; |
| self->rlock_count = 0; |
| self->rlock_owner = 0; |
| PyThread_release_lock(self->rlock_lock); |
| return Py_BuildValue("kk", count, owner); |
| } |
| |
| PyDoc_STRVAR(rlock_release_save_doc, |
| "_release_save() -> tuple\n\ |
| \n\ |
| For internal use by `threading.Condition`."); |
| |
| |
| static PyObject * |
| rlock_is_owned(rlockobject *self, PyObject *Py_UNUSED(ignored)) |
| { |
| unsigned long tid = PyThread_get_thread_ident(); |
| |
| if (self->rlock_count > 0 && self->rlock_owner == tid) { |
| Py_RETURN_TRUE; |
| } |
| Py_RETURN_FALSE; |
| } |
| |
| PyDoc_STRVAR(rlock_is_owned_doc, |
| "_is_owned() -> bool\n\ |
| \n\ |
| For internal use by `threading.Condition`."); |
| |
| static PyObject * |
| rlock_new(PyTypeObject *type, PyObject *args, PyObject *kwds) |
| { |
| rlockobject *self = (rlockobject *) type->tp_alloc(type, 0); |
| if (self == NULL) { |
| return NULL; |
| } |
| self->in_weakreflist = NULL; |
| self->rlock_owner = 0; |
| self->rlock_count = 0; |
| |
| self->rlock_lock = PyThread_allocate_lock(); |
| if (self->rlock_lock == NULL) { |
| Py_DECREF(self); |
| PyErr_SetString(ThreadError, "can't allocate lock"); |
| return NULL; |
| } |
| return (PyObject *) self; |
| } |
| |
| static PyObject * |
| rlock_repr(rlockobject *self) |
| { |
| return PyUnicode_FromFormat("<%s %s object owner=%ld count=%lu at %p>", |
| self->rlock_count ? "locked" : "unlocked", |
| Py_TYPE(self)->tp_name, self->rlock_owner, |
| self->rlock_count, self); |
| } |
| |
| |
| #ifdef HAVE_FORK |
| static PyObject * |
| rlock__at_fork_reinit(rlockobject *self, PyObject *Py_UNUSED(args)) |
| { |
| if (_PyThread_at_fork_reinit(&self->rlock_lock) < 0) { |
| PyErr_SetString(ThreadError, "failed to reinitialize lock at fork"); |
| return NULL; |
| } |
| |
| self->rlock_owner = 0; |
| self->rlock_count = 0; |
| |
| Py_RETURN_NONE; |
| } |
| #endif /* HAVE_FORK */ |
| |
| |
| static PyMethodDef rlock_methods[] = { |
| {"acquire", (PyCFunction)(void(*)(void))rlock_acquire, |
| METH_VARARGS | METH_KEYWORDS, rlock_acquire_doc}, |
| {"release", (PyCFunction)rlock_release, |
| METH_NOARGS, rlock_release_doc}, |
| {"_is_owned", (PyCFunction)rlock_is_owned, |
| METH_NOARGS, rlock_is_owned_doc}, |
| {"_acquire_restore", (PyCFunction)rlock_acquire_restore, |
| METH_VARARGS, rlock_acquire_restore_doc}, |
| {"_release_save", (PyCFunction)rlock_release_save, |
| METH_NOARGS, rlock_release_save_doc}, |
| {"__enter__", (PyCFunction)(void(*)(void))rlock_acquire, |
| METH_VARARGS | METH_KEYWORDS, rlock_acquire_doc}, |
| {"__exit__", (PyCFunction)rlock_release, |
| METH_VARARGS, rlock_release_doc}, |
| #ifdef HAVE_FORK |
| {"_at_fork_reinit", (PyCFunction)rlock__at_fork_reinit, |
| METH_NOARGS, NULL}, |
| #endif |
| {NULL, NULL} /* sentinel */ |
| }; |
| |
| |
| static PyTypeObject RLocktype = { |
| PyVarObject_HEAD_INIT(&PyType_Type, 0) |
| "_thread.RLock", /*tp_name*/ |
| sizeof(rlockobject), /*tp_basicsize*/ |
| 0, /*tp_itemsize*/ |
| /* methods */ |
| (destructor)rlock_dealloc, /*tp_dealloc*/ |
| 0, /*tp_vectorcall_offset*/ |
| 0, /*tp_getattr*/ |
| 0, /*tp_setattr*/ |
| 0, /*tp_as_async*/ |
| (reprfunc)rlock_repr, /*tp_repr*/ |
| 0, /*tp_as_number*/ |
| 0, /*tp_as_sequence*/ |
| 0, /*tp_as_mapping*/ |
| 0, /*tp_hash*/ |
| 0, /*tp_call*/ |
| 0, /*tp_str*/ |
| 0, /*tp_getattro*/ |
| 0, /*tp_setattro*/ |
| 0, /*tp_as_buffer*/ |
| Py_TPFLAGS_DEFAULT | Py_TPFLAGS_BASETYPE, /* tp_flags */ |
| 0, /*tp_doc*/ |
| 0, /*tp_traverse*/ |
| 0, /*tp_clear*/ |
| 0, /*tp_richcompare*/ |
| offsetof(rlockobject, in_weakreflist), /*tp_weaklistoffset*/ |
| 0, /*tp_iter*/ |
| 0, /*tp_iternext*/ |
| rlock_methods, /*tp_methods*/ |
| 0, /* tp_members */ |
| 0, /* tp_getset */ |
| 0, /* tp_base */ |
| 0, /* tp_dict */ |
| 0, /* tp_descr_get */ |
| 0, /* tp_descr_set */ |
| 0, /* tp_dictoffset */ |
| 0, /* tp_init */ |
| PyType_GenericAlloc, /* tp_alloc */ |
| rlock_new /* tp_new */ |
| }; |
| |
| static lockobject * |
| newlockobject(void) |
| { |
| lockobject *self; |
| self = PyObject_New(lockobject, &Locktype); |
| if (self == NULL) |
| return NULL; |
| self->lock_lock = PyThread_allocate_lock(); |
| self->locked = 0; |
| self->in_weakreflist = NULL; |
| if (self->lock_lock == NULL) { |
| Py_DECREF(self); |
| PyErr_SetString(ThreadError, "can't allocate lock"); |
| return NULL; |
| } |
| return self; |
| } |
| |
| /* Thread-local objects */ |
| |
| /* Quick overview: |
| |
| We need to be able to reclaim reference cycles as soon as possible |
| (both when a thread is being terminated, or a thread-local object |
| becomes unreachable from user data). Constraints: |
| - it must not be possible for thread-state dicts to be involved in |
| reference cycles (otherwise the cyclic GC will refuse to consider |
| objects referenced from a reachable thread-state dict, even though |
| local_dealloc would clear them) |
| - the death of a thread-state dict must still imply destruction of the |
| corresponding local dicts in all thread-local objects. |
| |
| Our implementation uses small "localdummy" objects in order to break |
| the reference chain. These trivial objects are hashable (using the |
| default scheme of identity hashing) and weakrefable. |
| Each thread-state holds a separate localdummy for each local object |
| (as a /strong reference/), |
| and each thread-local object holds a dict mapping /weak references/ |
| of localdummies to local dicts. |
| |
| Therefore: |
| - only the thread-state dict holds a strong reference to the dummies |
| - only the thread-local object holds a strong reference to the local dicts |
| - only outside objects (application- or library-level) hold strong |
| references to the thread-local objects |
| - as soon as a thread-state dict is destroyed, the weakref callbacks of all |
| dummies attached to that thread are called, and destroy the corresponding |
| local dicts from thread-local objects |
| - as soon as a thread-local object is destroyed, its local dicts are |
| destroyed and its dummies are manually removed from all thread states |
| - the GC can do its work correctly when a thread-local object is dangling, |
| without any interference from the thread-state dicts |
| |
| As an additional optimization, each localdummy holds a borrowed reference |
| to the corresponding localdict. This borrowed reference is only used |
| by the thread-local object which has created the localdummy, which should |
| guarantee that the localdict still exists when accessed. |
| */ |
| |
| typedef struct { |
| PyObject_HEAD |
| PyObject *localdict; /* Borrowed reference! */ |
| PyObject *weakreflist; /* List of weak references to self */ |
| } localdummyobject; |
| |
| static void |
| localdummy_dealloc(localdummyobject *self) |
| { |
| if (self->weakreflist != NULL) |
| PyObject_ClearWeakRefs((PyObject *) self); |
| Py_TYPE(self)->tp_free((PyObject*)self); |
| } |
| |
| static PyTypeObject localdummytype = { |
| PyVarObject_HEAD_INIT(NULL, 0) |
| /* tp_name */ "_thread._localdummy", |
| /* tp_basicsize */ sizeof(localdummyobject), |
| /* tp_itemsize */ 0, |
| /* tp_dealloc */ (destructor)localdummy_dealloc, |
| /* tp_vectorcall_offset */ 0, |
| /* tp_getattr */ 0, |
| /* tp_setattr */ 0, |
| /* tp_as_async */ 0, |
| /* tp_repr */ 0, |
| /* tp_as_number */ 0, |
| /* tp_as_sequence */ 0, |
| /* tp_as_mapping */ 0, |
| /* tp_hash */ 0, |
| /* tp_call */ 0, |
| /* tp_str */ 0, |
| /* tp_getattro */ 0, |
| /* tp_setattro */ 0, |
| /* tp_as_buffer */ 0, |
| /* tp_flags */ Py_TPFLAGS_DEFAULT, |
| /* tp_doc */ "Thread-local dummy", |
| /* tp_traverse */ 0, |
| /* tp_clear */ 0, |
| /* tp_richcompare */ 0, |
| /* tp_weaklistoffset */ offsetof(localdummyobject, weakreflist) |
| }; |
| |
| |
| typedef struct { |
| PyObject_HEAD |
| PyObject *key; |
| PyObject *args; |
| PyObject *kw; |
| PyObject *weakreflist; /* List of weak references to self */ |
| /* A {localdummy weakref -> localdict} dict */ |
| PyObject *dummies; |
| /* The callback for weakrefs to localdummies */ |
| PyObject *wr_callback; |
| } localobject; |
| |
| /* Forward declaration */ |
| static PyObject *_ldict(localobject *self); |
| static PyObject *_localdummy_destroyed(PyObject *meth_self, PyObject *dummyweakref); |
| |
| /* Create and register the dummy for the current thread. |
| Returns a borrowed reference of the corresponding local dict */ |
| static PyObject * |
| _local_create_dummy(localobject *self) |
| { |
| PyObject *tdict, *ldict = NULL, *wr = NULL; |
| localdummyobject *dummy = NULL; |
| int r; |
| |
| tdict = PyThreadState_GetDict(); |
| if (tdict == NULL) { |
| PyErr_SetString(PyExc_SystemError, |
| "Couldn't get thread-state dictionary"); |
| goto err; |
| } |
| |
| ldict = PyDict_New(); |
| if (ldict == NULL) |
| goto err; |
| dummy = (localdummyobject *) localdummytype.tp_alloc(&localdummytype, 0); |
| if (dummy == NULL) |
| goto err; |
| dummy->localdict = ldict; |
| wr = PyWeakref_NewRef((PyObject *) dummy, self->wr_callback); |
| if (wr == NULL) |
| goto err; |
| |
| /* As a side-effect, this will cache the weakref's hash before the |
| dummy gets deleted */ |
| r = PyDict_SetItem(self->dummies, wr, ldict); |
| if (r < 0) |
| goto err; |
| Py_CLEAR(wr); |
| r = PyDict_SetItem(tdict, self->key, (PyObject *) dummy); |
| if (r < 0) |
| goto err; |
| Py_CLEAR(dummy); |
| |
| Py_DECREF(ldict); |
| return ldict; |
| |
| err: |
| Py_XDECREF(ldict); |
| Py_XDECREF(wr); |
| Py_XDECREF(dummy); |
| return NULL; |
| } |
| |
| static PyObject * |
| local_new(PyTypeObject *type, PyObject *args, PyObject *kw) |
| { |
| localobject *self; |
| PyObject *wr; |
| static PyMethodDef wr_callback_def = { |
| "_localdummy_destroyed", (PyCFunction) _localdummy_destroyed, METH_O |
| }; |
| |
| if (type->tp_init == PyBaseObject_Type.tp_init) { |
| int rc = 0; |
| if (args != NULL) |
| rc = PyObject_IsTrue(args); |
| if (rc == 0 && kw != NULL) |
| rc = PyObject_IsTrue(kw); |
| if (rc != 0) { |
| if (rc > 0) |
| PyErr_SetString(PyExc_TypeError, |
| "Initialization arguments are not supported"); |
| return NULL; |
| } |
| } |
| |
| self = (localobject *)type->tp_alloc(type, 0); |
| if (self == NULL) |
| return NULL; |
| |
| Py_XINCREF(args); |
| self->args = args; |
| Py_XINCREF(kw); |
| self->kw = kw; |
| self->key = PyUnicode_FromFormat("thread.local.%p", self); |
| if (self->key == NULL) |
| goto err; |
| |
| self->dummies = PyDict_New(); |
| if (self->dummies == NULL) |
| goto err; |
| |
| /* We use a weak reference to self in the callback closure |
| in order to avoid spurious reference cycles */ |
| wr = PyWeakref_NewRef((PyObject *) self, NULL); |
| if (wr == NULL) |
| goto err; |
| self->wr_callback = PyCFunction_NewEx(&wr_callback_def, wr, NULL); |
| Py_DECREF(wr); |
| if (self->wr_callback == NULL) |
| goto err; |
| |
| if (_local_create_dummy(self) == NULL) |
| goto err; |
| |
| return (PyObject *)self; |
| |
| err: |
| Py_DECREF(self); |
| return NULL; |
| } |
| |
| static int |
| local_traverse(localobject *self, visitproc visit, void *arg) |
| { |
| Py_VISIT(self->args); |
| Py_VISIT(self->kw); |
| Py_VISIT(self->dummies); |
| return 0; |
| } |
| |
| static int |
| local_clear(localobject *self) |
| { |
| PyThreadState *tstate; |
| Py_CLEAR(self->args); |
| Py_CLEAR(self->kw); |
| Py_CLEAR(self->dummies); |
| Py_CLEAR(self->wr_callback); |
| /* Remove all strong references to dummies from the thread states */ |
| if (self->key |
| && (tstate = PyThreadState_Get()) |
| && tstate->interp) { |
| for(tstate = PyInterpreterState_ThreadHead(tstate->interp); |
| tstate; |
| tstate = PyThreadState_Next(tstate)) |
| if (tstate->dict) { |
| PyObject *v = _PyDict_Pop(tstate->dict, self->key, Py_None); |
| if (v == NULL) { |
| PyErr_Clear(); |
| } |
| else { |
| Py_DECREF(v); |
| } |
| } |
| } |
| return 0; |
| } |
| |
| static void |
| local_dealloc(localobject *self) |
| { |
| /* Weakrefs must be invalidated right now, otherwise they can be used |
| from code called below, which is very dangerous since Py_REFCNT(self) == 0 */ |
| if (self->weakreflist != NULL) |
| PyObject_ClearWeakRefs((PyObject *) self); |
| |
| PyObject_GC_UnTrack(self); |
| |
| local_clear(self); |
| Py_XDECREF(self->key); |
| Py_TYPE(self)->tp_free((PyObject*)self); |
| } |
| |
| /* Returns a borrowed reference to the local dict, creating it if necessary */ |
| static PyObject * |
| _ldict(localobject *self) |
| { |
| PyObject *tdict, *ldict, *dummy; |
| |
| tdict = PyThreadState_GetDict(); |
| if (tdict == NULL) { |
| PyErr_SetString(PyExc_SystemError, |
| "Couldn't get thread-state dictionary"); |
| return NULL; |
| } |
| |
| dummy = PyDict_GetItemWithError(tdict, self->key); |
| if (dummy == NULL) { |
| if (PyErr_Occurred()) { |
| return NULL; |
| } |
| ldict = _local_create_dummy(self); |
| if (ldict == NULL) |
| return NULL; |
| |
| if (Py_TYPE(self)->tp_init != PyBaseObject_Type.tp_init && |
| Py_TYPE(self)->tp_init((PyObject*)self, |
| self->args, self->kw) < 0) { |
| /* we need to get rid of ldict from thread so |
| we create a new one the next time we do an attr |
| access */ |
| PyDict_DelItem(tdict, self->key); |
| return NULL; |
| } |
| } |
| else { |
| assert(Py_IS_TYPE(dummy, &localdummytype)); |
| ldict = ((localdummyobject *) dummy)->localdict; |
| } |
| |
| return ldict; |
| } |
| |
| static int |
| local_setattro(localobject *self, PyObject *name, PyObject *v) |
| { |
| PyObject *ldict; |
| int r; |
| |
| ldict = _ldict(self); |
| if (ldict == NULL) |
| return -1; |
| |
| r = PyObject_RichCompareBool(name, str_dict, Py_EQ); |
| if (r == 1) { |
| PyErr_Format(PyExc_AttributeError, |
| "'%.50s' object attribute '%U' is read-only", |
| Py_TYPE(self)->tp_name, name); |
| return -1; |
| } |
| if (r == -1) |
| return -1; |
| |
| return _PyObject_GenericSetAttrWithDict((PyObject *)self, name, v, ldict); |
| } |
| |
| static PyObject *local_getattro(localobject *, PyObject *); |
| |
| static PyTypeObject localtype = { |
| PyVarObject_HEAD_INIT(NULL, 0) |
| /* tp_name */ "_thread._local", |
| /* tp_basicsize */ sizeof(localobject), |
| /* tp_itemsize */ 0, |
| /* tp_dealloc */ (destructor)local_dealloc, |
| /* tp_vectorcall_offset */ 0, |
| /* tp_getattr */ 0, |
| /* tp_setattr */ 0, |
| /* tp_as_async */ 0, |
| /* tp_repr */ 0, |
| /* tp_as_number */ 0, |
| /* tp_as_sequence */ 0, |
| /* tp_as_mapping */ 0, |
| /* tp_hash */ 0, |
| /* tp_call */ 0, |
| /* tp_str */ 0, |
| /* tp_getattro */ (getattrofunc)local_getattro, |
| /* tp_setattro */ (setattrofunc)local_setattro, |
| /* tp_as_buffer */ 0, |
| /* tp_flags */ Py_TPFLAGS_DEFAULT | Py_TPFLAGS_BASETYPE |
| | Py_TPFLAGS_HAVE_GC, |
| /* tp_doc */ "Thread-local data", |
| /* tp_traverse */ (traverseproc)local_traverse, |
| /* tp_clear */ (inquiry)local_clear, |
| /* tp_richcompare */ 0, |
| /* tp_weaklistoffset */ offsetof(localobject, weakreflist), |
| /* tp_iter */ 0, |
| /* tp_iternext */ 0, |
| /* tp_methods */ 0, |
| /* tp_members */ 0, |
| /* tp_getset */ 0, |
| /* tp_base */ 0, |
| /* tp_dict */ 0, /* internal use */ |
| /* tp_descr_get */ 0, |
| /* tp_descr_set */ 0, |
| /* tp_dictoffset */ 0, |
| /* tp_init */ 0, |
| /* tp_alloc */ 0, |
| /* tp_new */ local_new, |
| /* tp_free */ 0, /* Low-level free-mem routine */ |
| /* tp_is_gc */ 0, /* For PyObject_IS_GC */ |
| }; |
| |
| static PyObject * |
| local_getattro(localobject *self, PyObject *name) |
| { |
| PyObject *ldict, *value; |
| int r; |
| |
| ldict = _ldict(self); |
| if (ldict == NULL) |
| return NULL; |
| |
| r = PyObject_RichCompareBool(name, str_dict, Py_EQ); |
| if (r == 1) { |
| Py_INCREF(ldict); |
| return ldict; |
| } |
| if (r == -1) |
| return NULL; |
| |
| if (!Py_IS_TYPE(self, &localtype)) |
| /* use generic lookup for subtypes */ |
| return _PyObject_GenericGetAttrWithDict( |
| (PyObject *)self, name, ldict, 0); |
| |
| /* Optimization: just look in dict ourselves */ |
| value = PyDict_GetItemWithError(ldict, name); |
| if (value != NULL) { |
| Py_INCREF(value); |
| return value; |
| } |
| else if (PyErr_Occurred()) { |
| return NULL; |
| } |
| /* Fall back on generic to get __class__ and __dict__ */ |
| return _PyObject_GenericGetAttrWithDict( |
| (PyObject *)self, name, ldict, 0); |
| } |
| |
| /* Called when a dummy is destroyed. */ |
| static PyObject * |
| _localdummy_destroyed(PyObject *localweakref, PyObject *dummyweakref) |
| { |
| PyObject *obj; |
| localobject *self; |
| assert(PyWeakref_CheckRef(localweakref)); |
| obj = PyWeakref_GET_OBJECT(localweakref); |
| if (obj == Py_None) |
| Py_RETURN_NONE; |
| Py_INCREF(obj); |
| assert(PyObject_TypeCheck(obj, &localtype)); |
| /* If the thread-local object is still alive and not being cleared, |
| remove the corresponding local dict */ |
| self = (localobject *) obj; |
| if (self->dummies != NULL) { |
| PyObject *ldict; |
| ldict = PyDict_GetItemWithError(self->dummies, dummyweakref); |
| if (ldict != NULL) { |
| PyDict_DelItem(self->dummies, dummyweakref); |
| } |
| if (PyErr_Occurred()) |
| PyErr_WriteUnraisable(obj); |
| } |
| Py_DECREF(obj); |
| Py_RETURN_NONE; |
| } |
| |
| /* Module functions */ |
| |
| struct bootstate { |
| PyInterpreterState *interp; |
| PyObject *func; |
| PyObject *args; |
| PyObject *keyw; |
| PyThreadState *tstate; |
| _PyRuntimeState *runtime; |
| }; |
| |
| static void |
| t_bootstrap(void *boot_raw) |
| { |
| struct bootstate *boot = (struct bootstate *) boot_raw; |
| PyThreadState *tstate; |
| PyObject *res; |
| |
| tstate = boot->tstate; |
| tstate->thread_id = PyThread_get_thread_ident(); |
| _PyThreadState_Init(tstate); |
| PyEval_AcquireThread(tstate); |
| tstate->interp->num_threads++; |
| res = PyObject_Call(boot->func, boot->args, boot->keyw); |
| if (res == NULL) { |
| if (PyErr_ExceptionMatches(PyExc_SystemExit)) |
| /* SystemExit is ignored silently */ |
| PyErr_Clear(); |
| else { |
| _PyErr_WriteUnraisableMsg("in thread started by", boot->func); |
| } |
| } |
| else { |
| Py_DECREF(res); |
| } |
| Py_DECREF(boot->func); |
| Py_DECREF(boot->args); |
| Py_XDECREF(boot->keyw); |
| PyMem_DEL(boot_raw); |
| tstate->interp->num_threads--; |
| PyThreadState_Clear(tstate); |
| _PyThreadState_DeleteCurrent(tstate); |
| PyThread_exit_thread(); |
| } |
| |
| static PyObject * |
| thread_PyThread_start_new_thread(PyObject *self, PyObject *fargs) |
| { |
| _PyRuntimeState *runtime = &_PyRuntime; |
| PyObject *func, *args, *keyw = NULL; |
| struct bootstate *boot; |
| unsigned long ident; |
| |
| if (!PyArg_UnpackTuple(fargs, "start_new_thread", 2, 3, |
| &func, &args, &keyw)) |
| return NULL; |
| if (!PyCallable_Check(func)) { |
| PyErr_SetString(PyExc_TypeError, |
| "first arg must be callable"); |
| return NULL; |
| } |
| if (!PyTuple_Check(args)) { |
| PyErr_SetString(PyExc_TypeError, |
| "2nd arg must be a tuple"); |
| return NULL; |
| } |
| if (keyw != NULL && !PyDict_Check(keyw)) { |
| PyErr_SetString(PyExc_TypeError, |
| "optional 3rd arg must be a dictionary"); |
| return NULL; |
| } |
| |
| PyInterpreterState *interp = _PyInterpreterState_GET(); |
| if (interp->config._isolated_interpreter) { |
| PyErr_SetString(PyExc_RuntimeError, |
| "thread is not supported for isolated subinterpreters"); |
| return NULL; |
| } |
| |
| boot = PyMem_NEW(struct bootstate, 1); |
| if (boot == NULL) |
| return PyErr_NoMemory(); |
| boot->interp = _PyInterpreterState_GET(); |
| boot->func = func; |
| boot->args = args; |
| boot->keyw = keyw; |
| boot->tstate = _PyThreadState_Prealloc(boot->interp); |
| boot->runtime = runtime; |
| if (boot->tstate == NULL) { |
| PyMem_DEL(boot); |
| return PyErr_NoMemory(); |
| } |
| Py_INCREF(func); |
| Py_INCREF(args); |
| Py_XINCREF(keyw); |
| |
| ident = PyThread_start_new_thread(t_bootstrap, (void*) boot); |
| if (ident == PYTHREAD_INVALID_THREAD_ID) { |
| PyErr_SetString(ThreadError, "can't start new thread"); |
| Py_DECREF(func); |
| Py_DECREF(args); |
| Py_XDECREF(keyw); |
| PyThreadState_Clear(boot->tstate); |
| PyMem_DEL(boot); |
| return NULL; |
| } |
| return PyLong_FromUnsignedLong(ident); |
| } |
| |
| PyDoc_STRVAR(start_new_doc, |
| "start_new_thread(function, args[, kwargs])\n\ |
| (start_new() is an obsolete synonym)\n\ |
| \n\ |
| Start a new thread and return its identifier. The thread will call the\n\ |
| function with positional arguments from the tuple args and keyword arguments\n\ |
| taken from the optional dictionary kwargs. The thread exits when the\n\ |
| function returns; the return value is ignored. The thread will also exit\n\ |
| when the function raises an unhandled exception; a stack trace will be\n\ |
| printed unless the exception is SystemExit.\n"); |
| |
| static PyObject * |
| thread_PyThread_exit_thread(PyObject *self, PyObject *Py_UNUSED(ignored)) |
| { |
| PyErr_SetNone(PyExc_SystemExit); |
| return NULL; |
| } |
| |
| PyDoc_STRVAR(exit_doc, |
| "exit()\n\ |
| (exit_thread() is an obsolete synonym)\n\ |
| \n\ |
| This is synonymous to ``raise SystemExit''. It will cause the current\n\ |
| thread to exit silently unless the exception is caught."); |
| |
| static PyObject * |
| thread_PyThread_interrupt_main(PyObject * self, PyObject *Py_UNUSED(ignored)) |
| { |
| PyErr_SetInterrupt(); |
| Py_RETURN_NONE; |
| } |
| |
| PyDoc_STRVAR(interrupt_doc, |
| "interrupt_main()\n\ |
| \n\ |
| Raise a KeyboardInterrupt in the main thread.\n\ |
| A subthread can use this function to interrupt the main thread." |
| ); |
| |
| static lockobject *newlockobject(void); |
| |
| static PyObject * |
| thread_PyThread_allocate_lock(PyObject *self, PyObject *Py_UNUSED(ignored)) |
| { |
| return (PyObject *) newlockobject(); |
| } |
| |
| PyDoc_STRVAR(allocate_doc, |
| "allocate_lock() -> lock object\n\ |
| (allocate() is an obsolete synonym)\n\ |
| \n\ |
| Create a new lock object. See help(type(threading.Lock())) for\n\ |
| information about locks."); |
| |
| static PyObject * |
| thread_get_ident(PyObject *self, PyObject *Py_UNUSED(ignored)) |
| { |
| unsigned long ident = PyThread_get_thread_ident(); |
| if (ident == PYTHREAD_INVALID_THREAD_ID) { |
| PyErr_SetString(ThreadError, "no current thread ident"); |
| return NULL; |
| } |
| return PyLong_FromUnsignedLong(ident); |
| } |
| |
| PyDoc_STRVAR(get_ident_doc, |
| "get_ident() -> integer\n\ |
| \n\ |
| Return a non-zero integer that uniquely identifies the current thread\n\ |
| amongst other threads that exist simultaneously.\n\ |
| This may be used to identify per-thread resources.\n\ |
| Even though on some platforms threads identities may appear to be\n\ |
| allocated consecutive numbers starting at 1, this behavior should not\n\ |
| be relied upon, and the number should be seen purely as a magic cookie.\n\ |
| A thread's identity may be reused for another thread after it exits."); |
| |
| #ifdef PY_HAVE_THREAD_NATIVE_ID |
| static PyObject * |
| thread_get_native_id(PyObject *self, PyObject *Py_UNUSED(ignored)) |
| { |
| unsigned long native_id = PyThread_get_thread_native_id(); |
| return PyLong_FromUnsignedLong(native_id); |
| } |
| |
| PyDoc_STRVAR(get_native_id_doc, |
| "get_native_id() -> integer\n\ |
| \n\ |
| Return a non-negative integer identifying the thread as reported\n\ |
| by the OS (kernel). This may be used to uniquely identify a\n\ |
| particular thread within a system."); |
| #endif |
| |
| static PyObject * |
| thread__count(PyObject *self, PyObject *Py_UNUSED(ignored)) |
| { |
| PyInterpreterState *interp = _PyInterpreterState_GET(); |
| return PyLong_FromLong(interp->num_threads); |
| } |
| |
| PyDoc_STRVAR(_count_doc, |
| "_count() -> integer\n\ |
| \n\ |
| \ |
| Return the number of currently running Python threads, excluding\n\ |
| the main thread. The returned number comprises all threads created\n\ |
| through `start_new_thread()` as well as `threading.Thread`, and not\n\ |
| yet finished.\n\ |
| \n\ |
| This function is meant for internal and specialized purposes only.\n\ |
| In most applications `threading.enumerate()` should be used instead."); |
| |
| static void |
| release_sentinel(void *wr_raw) |
| { |
| PyObject *wr = _PyObject_CAST(wr_raw); |
| /* Tricky: this function is called when the current thread state |
| is being deleted. Therefore, only simple C code can safely |
| execute here. */ |
| PyObject *obj = PyWeakref_GET_OBJECT(wr); |
| lockobject *lock; |
| if (obj != Py_None) { |
| assert(Py_IS_TYPE(obj, &Locktype)); |
| lock = (lockobject *) obj; |
| if (lock->locked) { |
| PyThread_release_lock(lock->lock_lock); |
| lock->locked = 0; |
| } |
| } |
| /* Deallocating a weakref with a NULL callback only calls |
| PyObject_GC_Del(), which can't call any Python code. */ |
| Py_DECREF(wr); |
| } |
| |
| static PyObject * |
| thread__set_sentinel(PyObject *self, PyObject *Py_UNUSED(ignored)) |
| { |
| PyObject *wr; |
| PyThreadState *tstate = PyThreadState_Get(); |
| lockobject *lock; |
| |
| if (tstate->on_delete_data != NULL) { |
| /* We must support the re-creation of the lock from a |
| fork()ed child. */ |
| assert(tstate->on_delete == &release_sentinel); |
| wr = (PyObject *) tstate->on_delete_data; |
| tstate->on_delete = NULL; |
| tstate->on_delete_data = NULL; |
| Py_DECREF(wr); |
| } |
| lock = newlockobject(); |
| if (lock == NULL) |
| return NULL; |
| /* The lock is owned by whoever called _set_sentinel(), but the weakref |
| hangs to the thread state. */ |
| wr = PyWeakref_NewRef((PyObject *) lock, NULL); |
| if (wr == NULL) { |
| Py_DECREF(lock); |
| return NULL; |
| } |
| tstate->on_delete_data = (void *) wr; |
| tstate->on_delete = &release_sentinel; |
| return (PyObject *) lock; |
| } |
| |
| PyDoc_STRVAR(_set_sentinel_doc, |
| "_set_sentinel() -> lock\n\ |
| \n\ |
| Set a sentinel lock that will be released when the current thread\n\ |
| state is finalized (after it is untied from the interpreter).\n\ |
| \n\ |
| This is a private API for the threading module."); |
| |
| static PyObject * |
| thread_stack_size(PyObject *self, PyObject *args) |
| { |
| size_t old_size; |
| Py_ssize_t new_size = 0; |
| int rc; |
| |
| if (!PyArg_ParseTuple(args, "|n:stack_size", &new_size)) |
| return NULL; |
| |
| if (new_size < 0) { |
| PyErr_SetString(PyExc_ValueError, |
| "size must be 0 or a positive value"); |
| return NULL; |
| } |
| |
| old_size = PyThread_get_stacksize(); |
| |
| rc = PyThread_set_stacksize((size_t) new_size); |
| if (rc == -1) { |
| PyErr_Format(PyExc_ValueError, |
| "size not valid: %zd bytes", |
| new_size); |
| return NULL; |
| } |
| if (rc == -2) { |
| PyErr_SetString(ThreadError, |
| "setting stack size not supported"); |
| return NULL; |
| } |
| |
| return PyLong_FromSsize_t((Py_ssize_t) old_size); |
| } |
| |
| PyDoc_STRVAR(stack_size_doc, |
| "stack_size([size]) -> size\n\ |
| \n\ |
| Return the thread stack size used when creating new threads. The\n\ |
| optional size argument specifies the stack size (in bytes) to be used\n\ |
| for subsequently created threads, and must be 0 (use platform or\n\ |
| configured default) or a positive integer value of at least 32,768 (32k).\n\ |
| If changing the thread stack size is unsupported, a ThreadError\n\ |
| exception is raised. If the specified size is invalid, a ValueError\n\ |
| exception is raised, and the stack size is unmodified. 32k bytes\n\ |
| currently the minimum supported stack size value to guarantee\n\ |
| sufficient stack space for the interpreter itself.\n\ |
| \n\ |
| Note that some platforms may have particular restrictions on values for\n\ |
| the stack size, such as requiring a minimum stack size larger than 32 KiB or\n\ |
| requiring allocation in multiples of the system memory page size\n\ |
| - platform documentation should be referred to for more information\n\ |
| (4 KiB pages are common; using multiples of 4096 for the stack size is\n\ |
| the suggested approach in the absence of more specific information)."); |
| |
| static int |
| thread_excepthook_file(PyObject *file, PyObject *exc_type, PyObject *exc_value, |
| PyObject *exc_traceback, PyObject *thread) |
| { |
| _Py_IDENTIFIER(name); |
| /* print(f"Exception in thread {thread.name}:", file=file) */ |
| if (PyFile_WriteString("Exception in thread ", file) < 0) { |
| return -1; |
| } |
| |
| PyObject *name = NULL; |
| if (thread != Py_None) { |
| if (_PyObject_LookupAttrId(thread, &PyId_name, &name) < 0) { |
| return -1; |
| } |
| } |
| if (name != NULL) { |
| if (PyFile_WriteObject(name, file, Py_PRINT_RAW) < 0) { |
| Py_DECREF(name); |
| return -1; |
| } |
| Py_DECREF(name); |
| } |
| else { |
| unsigned long ident = PyThread_get_thread_ident(); |
| PyObject *str = PyUnicode_FromFormat("%lu", ident); |
| if (str != NULL) { |
| if (PyFile_WriteObject(str, file, Py_PRINT_RAW) < 0) { |
| Py_DECREF(str); |
| return -1; |
| } |
| Py_DECREF(str); |
| } |
| else { |
| PyErr_Clear(); |
| |
| if (PyFile_WriteString("<failed to get thread name>", file) < 0) { |
| return -1; |
| } |
| } |
| } |
| |
| if (PyFile_WriteString(":\n", file) < 0) { |
| return -1; |
| } |
| |
| /* Display the traceback */ |
| _PyErr_Display(file, exc_type, exc_value, exc_traceback); |
| |
| /* Call file.flush() */ |
| PyObject *res = _PyObject_CallMethodIdNoArgs(file, &PyId_flush); |
| if (!res) { |
| return -1; |
| } |
| Py_DECREF(res); |
| |
| return 0; |
| } |
| |
| |
| PyDoc_STRVAR(ExceptHookArgs__doc__, |
| "ExceptHookArgs\n\ |
| \n\ |
| Type used to pass arguments to threading.excepthook."); |
| |
| static PyTypeObject ExceptHookArgsType; |
| |
| static PyStructSequence_Field ExceptHookArgs_fields[] = { |
| {"exc_type", "Exception type"}, |
| {"exc_value", "Exception value"}, |
| {"exc_traceback", "Exception traceback"}, |
| {"thread", "Thread"}, |
| {0} |
| }; |
| |
| static PyStructSequence_Desc ExceptHookArgs_desc = { |
| .name = "_thread.ExceptHookArgs", |
| .doc = ExceptHookArgs__doc__, |
| .fields = ExceptHookArgs_fields, |
| .n_in_sequence = 4 |
| }; |
| |
| |
| static PyObject * |
| thread_excepthook(PyObject *self, PyObject *args) |
| { |
| if (!Py_IS_TYPE(args, &ExceptHookArgsType)) { |
| PyErr_SetString(PyExc_TypeError, |
| "_thread.excepthook argument type " |
| "must be ExceptHookArgs"); |
| return NULL; |
| } |
| |
| /* Borrowed reference */ |
| PyObject *exc_type = PyStructSequence_GET_ITEM(args, 0); |
| if (exc_type == PyExc_SystemExit) { |
| /* silently ignore SystemExit */ |
| Py_RETURN_NONE; |
| } |
| |
| /* Borrowed references */ |
| PyObject *exc_value = PyStructSequence_GET_ITEM(args, 1); |
| PyObject *exc_tb = PyStructSequence_GET_ITEM(args, 2); |
| PyObject *thread = PyStructSequence_GET_ITEM(args, 3); |
| |
| PyObject *file = _PySys_GetObjectId(&PyId_stderr); |
| if (file == NULL || file == Py_None) { |
| if (thread == Py_None) { |
| /* do nothing if sys.stderr is None and thread is None */ |
| Py_RETURN_NONE; |
| } |
| |
| file = PyObject_GetAttrString(thread, "_stderr"); |
| if (file == NULL) { |
| return NULL; |
| } |
| if (file == Py_None) { |
| Py_DECREF(file); |
| /* do nothing if sys.stderr is None and sys.stderr was None |
| when the thread was created */ |
| Py_RETURN_NONE; |
| } |
| } |
| else { |
| Py_INCREF(file); |
| } |
| |
| int res = thread_excepthook_file(file, exc_type, exc_value, exc_tb, |
| thread); |
| Py_DECREF(file); |
| if (res < 0) { |
| return NULL; |
| } |
| |
| Py_RETURN_NONE; |
| } |
| |
| PyDoc_STRVAR(excepthook_doc, |
| "excepthook(exc_type, exc_value, exc_traceback, thread)\n\ |
| \n\ |
| Handle uncaught Thread.run() exception."); |
| |
| static PyMethodDef thread_methods[] = { |
| {"start_new_thread", (PyCFunction)thread_PyThread_start_new_thread, |
| METH_VARARGS, start_new_doc}, |
| {"start_new", (PyCFunction)thread_PyThread_start_new_thread, |
| METH_VARARGS, start_new_doc}, |
| {"allocate_lock", thread_PyThread_allocate_lock, |
| METH_NOARGS, allocate_doc}, |
| {"allocate", thread_PyThread_allocate_lock, |
| METH_NOARGS, allocate_doc}, |
| {"exit_thread", thread_PyThread_exit_thread, |
| METH_NOARGS, exit_doc}, |
| {"exit", thread_PyThread_exit_thread, |
| METH_NOARGS, exit_doc}, |
| {"interrupt_main", thread_PyThread_interrupt_main, |
| METH_NOARGS, interrupt_doc}, |
| {"get_ident", thread_get_ident, |
| METH_NOARGS, get_ident_doc}, |
| #ifdef PY_HAVE_THREAD_NATIVE_ID |
| {"get_native_id", thread_get_native_id, |
| METH_NOARGS, get_native_id_doc}, |
| #endif |
| {"_count", thread__count, |
| METH_NOARGS, _count_doc}, |
| {"stack_size", (PyCFunction)thread_stack_size, |
| METH_VARARGS, stack_size_doc}, |
| {"_set_sentinel", thread__set_sentinel, |
| METH_NOARGS, _set_sentinel_doc}, |
| {"_excepthook", thread_excepthook, |
| METH_O, excepthook_doc}, |
| {NULL, NULL} /* sentinel */ |
| }; |
| |
| |
| /* Initialization function */ |
| |
| PyDoc_STRVAR(thread_doc, |
| "This module provides primitive operations to write multi-threaded programs.\n\ |
| The 'threading' module provides a more convenient interface."); |
| |
| PyDoc_STRVAR(lock_doc, |
| "A lock object is a synchronization primitive. To create a lock,\n\ |
| call threading.Lock(). Methods are:\n\ |
| \n\ |
| acquire() -- lock the lock, possibly blocking until it can be obtained\n\ |
| release() -- unlock of the lock\n\ |
| locked() -- test whether the lock is currently locked\n\ |
| \n\ |
| A lock is not owned by the thread that locked it; another thread may\n\ |
| unlock it. A thread attempting to lock a lock that it has already locked\n\ |
| will block until another thread unlocks it. Deadlocks may ensue."); |
| |
| static struct PyModuleDef threadmodule = { |
| PyModuleDef_HEAD_INIT, |
| "_thread", |
| thread_doc, |
| -1, |
| thread_methods, |
| NULL, |
| NULL, |
| NULL, |
| NULL |
| }; |
| |
| |
| PyMODINIT_FUNC |
| PyInit__thread(void) |
| { |
| PyObject *m, *d, *v; |
| double time_max; |
| double timeout_max; |
| PyInterpreterState *interp = _PyInterpreterState_GET(); |
| |
| /* Initialize types: */ |
| if (PyType_Ready(&localdummytype) < 0) |
| return NULL; |
| if (PyType_Ready(&localtype) < 0) |
| return NULL; |
| if (PyType_Ready(&Locktype) < 0) |
| return NULL; |
| if (PyType_Ready(&RLocktype) < 0) |
| return NULL; |
| if (ExceptHookArgsType.tp_name == NULL) { |
| if (PyStructSequence_InitType2(&ExceptHookArgsType, |
| &ExceptHookArgs_desc) < 0) { |
| return NULL; |
| } |
| } |
| |
| /* Create the module and add the functions */ |
| m = PyModule_Create(&threadmodule); |
| if (m == NULL) |
| return NULL; |
| |
| timeout_max = (_PyTime_t)PY_TIMEOUT_MAX * 1e-6; |
| time_max = _PyTime_AsSecondsDouble(_PyTime_MAX); |
| timeout_max = Py_MIN(timeout_max, time_max); |
| /* Round towards minus infinity */ |
| timeout_max = floor(timeout_max); |
| |
| v = PyFloat_FromDouble(timeout_max); |
| if (!v) |
| return NULL; |
| if (PyModule_AddObject(m, "TIMEOUT_MAX", v) < 0) |
| return NULL; |
| |
| /* Add a symbolic constant */ |
| d = PyModule_GetDict(m); |
| ThreadError = PyExc_RuntimeError; |
| Py_INCREF(ThreadError); |
| |
| PyDict_SetItemString(d, "error", ThreadError); |
| Locktype.tp_doc = lock_doc; |
| Py_INCREF(&Locktype); |
| PyDict_SetItemString(d, "LockType", (PyObject *)&Locktype); |
| |
| Py_INCREF(&RLocktype); |
| if (PyModule_AddObject(m, "RLock", (PyObject *)&RLocktype) < 0) |
| return NULL; |
| |
| Py_INCREF(&localtype); |
| if (PyModule_AddObject(m, "_local", (PyObject *)&localtype) < 0) |
| return NULL; |
| |
| Py_INCREF(&ExceptHookArgsType); |
| if (PyModule_AddObject(m, "_ExceptHookArgs", |
| (PyObject *)&ExceptHookArgsType) < 0) |
| return NULL; |
| |
| interp->num_threads = 0; |
| |
| str_dict = PyUnicode_InternFromString("__dict__"); |
| if (str_dict == NULL) |
| return NULL; |
| |
| /* Initialize the C thread library */ |
| PyThread_init_thread(); |
| return m; |
| } |