| #include "Python.h" |
| #include "structmember.h" |
| |
| /* collections module implementation of a deque() datatype |
| Written and maintained by Raymond D. Hettinger <python@rcn.com> |
| Copyright (c) 2004 Python Software Foundation. |
| All rights reserved. |
| */ |
| |
| /* The block length may be set to any number over 1. Larger numbers |
| * reduce the number of calls to the memory allocator but take more |
| * memory. Ideally, BLOCKLEN should be set with an eye to the |
| * length of a cache line. |
| */ |
| |
| #define BLOCKLEN 62 |
| #define CENTER ((BLOCKLEN - 1) / 2) |
| |
| /* A `dequeobject` is composed of a doubly-linked list of `block` nodes. |
| * This list is not circular (the leftmost block has leftlink==NULL, |
| * and the rightmost block has rightlink==NULL). A deque d's first |
| * element is at d.leftblock[leftindex] and its last element is at |
| * d.rightblock[rightindex]; note that, unlike as for Python slice |
| * indices, these indices are inclusive on both ends. By being inclusive |
| * on both ends, algorithms for left and right operations become |
| * symmetrical which simplifies the design. |
| * |
| * The list of blocks is never empty, so d.leftblock and d.rightblock |
| * are never equal to NULL. |
| * |
| * The indices, d.leftindex and d.rightindex are always in the range |
| * 0 <= index < BLOCKLEN. |
| * Their exact relationship is: |
| * (d.leftindex + d.len - 1) % BLOCKLEN == d.rightindex. |
| * |
| * Empty deques have d.len == 0; d.leftblock==d.rightblock; |
| * d.leftindex == CENTER+1; and d.rightindex == CENTER. |
| * Checking for d.len == 0 is the intended way to see whether d is empty. |
| * |
| * Whenever d.leftblock == d.rightblock, |
| * d.leftindex + d.len - 1 == d.rightindex. |
| * |
| * However, when d.leftblock != d.rightblock, d.leftindex and d.rightindex |
| * become indices into distinct blocks and either may be larger than the |
| * other. |
| */ |
| |
| typedef struct BLOCK { |
| struct BLOCK *leftlink; |
| struct BLOCK *rightlink; |
| PyObject *data[BLOCKLEN]; |
| } block; |
| |
| #define MAXFREEBLOCKS 10 |
| static Py_ssize_t numfreeblocks = 0; |
| static block *freeblocks[MAXFREEBLOCKS]; |
| |
| static block * |
| newblock(block *leftlink, block *rightlink, Py_ssize_t len) { |
| block *b; |
| /* To prevent len from overflowing PY_SSIZE_T_MAX on 64-bit machines, we |
| * refuse to allocate new blocks if the current len is dangerously |
| * close. There is some extra margin to prevent spurious arithmetic |
| * overflows at various places. The following check ensures that |
| * the blocks allocated to the deque, in the worst case, can only |
| * have PY_SSIZE_T_MAX-2 entries in total. |
| */ |
| if (len >= PY_SSIZE_T_MAX - 2*BLOCKLEN) { |
| PyErr_SetString(PyExc_OverflowError, |
| "cannot add more blocks to the deque"); |
| return NULL; |
| } |
| if (numfreeblocks) { |
| numfreeblocks -= 1; |
| b = freeblocks[numfreeblocks]; |
| } else { |
| b = PyMem_Malloc(sizeof(block)); |
| if (b == NULL) { |
| PyErr_NoMemory(); |
| return NULL; |
| } |
| } |
| b->leftlink = leftlink; |
| b->rightlink = rightlink; |
| return b; |
| } |
| |
| static void |
| freeblock(block *b) |
| { |
| if (numfreeblocks < MAXFREEBLOCKS) { |
| freeblocks[numfreeblocks] = b; |
| numfreeblocks++; |
| } else { |
| PyMem_Free(b); |
| } |
| } |
| |
| typedef struct { |
| PyObject_HEAD |
| block *leftblock; |
| block *rightblock; |
| Py_ssize_t leftindex; /* in range(BLOCKLEN) */ |
| Py_ssize_t rightindex; /* in range(BLOCKLEN) */ |
| Py_ssize_t len; |
| Py_ssize_t maxlen; |
| long state; /* incremented whenever the indices move */ |
| PyObject *weakreflist; /* List of weak references */ |
| } dequeobject; |
| |
| /* The deque's size limit is d.maxlen. The limit can be zero or positive. |
| * If there is no limit, then d.maxlen == -1. |
| * |
| * After an item is added to a deque, we check to see if the size has grown past |
| * the limit. If it has, we get the size back down to the limit by popping an |
| * item off of the opposite end. The methods that can trigger this are append(), |
| * appendleft(), extend(), and extendleft(). |
| */ |
| |
| #define TRIM(d, popfunction) \ |
| if (d->maxlen != -1 && d->len > d->maxlen) { \ |
| PyObject *rv = popfunction(d, NULL); \ |
| assert(rv != NULL && d->len <= d->maxlen); \ |
| Py_DECREF(rv); \ |
| } |
| |
| static PyTypeObject deque_type; |
| |
| static PyObject * |
| deque_new(PyTypeObject *type, PyObject *args, PyObject *kwds) |
| { |
| dequeobject *deque; |
| block *b; |
| |
| /* create dequeobject structure */ |
| deque = (dequeobject *)type->tp_alloc(type, 0); |
| if (deque == NULL) |
| return NULL; |
| |
| b = newblock(NULL, NULL, 0); |
| if (b == NULL) { |
| Py_DECREF(deque); |
| return NULL; |
| } |
| |
| assert(BLOCKLEN >= 2); |
| deque->leftblock = b; |
| deque->rightblock = b; |
| deque->leftindex = CENTER + 1; |
| deque->rightindex = CENTER; |
| deque->len = 0; |
| deque->state = 0; |
| deque->weakreflist = NULL; |
| deque->maxlen = -1; |
| |
| return (PyObject *)deque; |
| } |
| |
| static PyObject * |
| deque_pop(dequeobject *deque, PyObject *unused) |
| { |
| PyObject *item; |
| block *prevblock; |
| |
| if (deque->len == 0) { |
| PyErr_SetString(PyExc_IndexError, "pop from an empty deque"); |
| return NULL; |
| } |
| item = deque->rightblock->data[deque->rightindex]; |
| deque->rightindex--; |
| deque->len--; |
| deque->state++; |
| |
| if (deque->rightindex == -1) { |
| if (deque->len == 0) { |
| assert(deque->leftblock == deque->rightblock); |
| assert(deque->leftindex == deque->rightindex+1); |
| /* re-center instead of freeing a block */ |
| deque->leftindex = CENTER + 1; |
| deque->rightindex = CENTER; |
| } else { |
| prevblock = deque->rightblock->leftlink; |
| assert(deque->leftblock != deque->rightblock); |
| freeblock(deque->rightblock); |
| prevblock->rightlink = NULL; |
| deque->rightblock = prevblock; |
| deque->rightindex = BLOCKLEN - 1; |
| } |
| } |
| return item; |
| } |
| |
| PyDoc_STRVAR(pop_doc, "Remove and return the rightmost element."); |
| |
| static PyObject * |
| deque_popleft(dequeobject *deque, PyObject *unused) |
| { |
| PyObject *item; |
| block *prevblock; |
| |
| if (deque->len == 0) { |
| PyErr_SetString(PyExc_IndexError, "pop from an empty deque"); |
| return NULL; |
| } |
| assert(deque->leftblock != NULL); |
| item = deque->leftblock->data[deque->leftindex]; |
| deque->leftindex++; |
| deque->len--; |
| deque->state++; |
| |
| if (deque->leftindex == BLOCKLEN) { |
| if (deque->len == 0) { |
| assert(deque->leftblock == deque->rightblock); |
| assert(deque->leftindex == deque->rightindex+1); |
| /* re-center instead of freeing a block */ |
| deque->leftindex = CENTER + 1; |
| deque->rightindex = CENTER; |
| } else { |
| assert(deque->leftblock != deque->rightblock); |
| prevblock = deque->leftblock->rightlink; |
| freeblock(deque->leftblock); |
| assert(prevblock != NULL); |
| prevblock->leftlink = NULL; |
| deque->leftblock = prevblock; |
| deque->leftindex = 0; |
| } |
| } |
| return item; |
| } |
| |
| PyDoc_STRVAR(popleft_doc, "Remove and return the leftmost element."); |
| |
| static PyObject * |
| deque_append(dequeobject *deque, PyObject *item) |
| { |
| deque->state++; |
| if (deque->rightindex == BLOCKLEN-1) { |
| block *b = newblock(deque->rightblock, NULL, deque->len); |
| if (b == NULL) |
| return NULL; |
| assert(deque->rightblock->rightlink == NULL); |
| deque->rightblock->rightlink = b; |
| deque->rightblock = b; |
| deque->rightindex = -1; |
| } |
| Py_INCREF(item); |
| deque->len++; |
| deque->rightindex++; |
| deque->rightblock->data[deque->rightindex] = item; |
| TRIM(deque, deque_popleft); |
| Py_RETURN_NONE; |
| } |
| |
| PyDoc_STRVAR(append_doc, "Add an element to the right side of the deque."); |
| |
| static PyObject * |
| deque_appendleft(dequeobject *deque, PyObject *item) |
| { |
| deque->state++; |
| if (deque->leftindex == 0) { |
| block *b = newblock(NULL, deque->leftblock, deque->len); |
| if (b == NULL) |
| return NULL; |
| assert(deque->leftblock->leftlink == NULL); |
| deque->leftblock->leftlink = b; |
| deque->leftblock = b; |
| deque->leftindex = BLOCKLEN; |
| } |
| Py_INCREF(item); |
| deque->len++; |
| deque->leftindex--; |
| deque->leftblock->data[deque->leftindex] = item; |
| TRIM(deque, deque_pop); |
| Py_RETURN_NONE; |
| } |
| |
| PyDoc_STRVAR(appendleft_doc, "Add an element to the left side of the deque."); |
| |
| |
| /* Run an iterator to exhaustion. Shortcut for |
| the extend/extendleft methods when maxlen == 0. */ |
| static PyObject* |
| consume_iterator(PyObject *it) |
| { |
| PyObject *item; |
| |
| while ((item = PyIter_Next(it)) != NULL) { |
| Py_DECREF(item); |
| } |
| Py_DECREF(it); |
| if (PyErr_Occurred()) |
| return NULL; |
| Py_RETURN_NONE; |
| } |
| |
| static PyObject * |
| deque_extend(dequeobject *deque, PyObject *iterable) |
| { |
| PyObject *it, *item; |
| |
| /* Handle case where id(deque) == id(iterable) */ |
| if ((PyObject *)deque == iterable) { |
| PyObject *result; |
| PyObject *s = PySequence_List(iterable); |
| if (s == NULL) |
| return NULL; |
| result = deque_extend(deque, s); |
| Py_DECREF(s); |
| return result; |
| } |
| |
| it = PyObject_GetIter(iterable); |
| if (it == NULL) |
| return NULL; |
| |
| if (deque->maxlen == 0) |
| return consume_iterator(it); |
| |
| while ((item = PyIter_Next(it)) != NULL) { |
| deque->state++; |
| if (deque->rightindex == BLOCKLEN-1) { |
| block *b = newblock(deque->rightblock, NULL, |
| deque->len); |
| if (b == NULL) { |
| Py_DECREF(item); |
| Py_DECREF(it); |
| return NULL; |
| } |
| assert(deque->rightblock->rightlink == NULL); |
| deque->rightblock->rightlink = b; |
| deque->rightblock = b; |
| deque->rightindex = -1; |
| } |
| deque->len++; |
| deque->rightindex++; |
| deque->rightblock->data[deque->rightindex] = item; |
| TRIM(deque, deque_popleft); |
| } |
| Py_DECREF(it); |
| if (PyErr_Occurred()) |
| return NULL; |
| Py_RETURN_NONE; |
| } |
| |
| PyDoc_STRVAR(extend_doc, |
| "Extend the right side of the deque with elements from the iterable"); |
| |
| static PyObject * |
| deque_extendleft(dequeobject *deque, PyObject *iterable) |
| { |
| PyObject *it, *item; |
| |
| /* Handle case where id(deque) == id(iterable) */ |
| if ((PyObject *)deque == iterable) { |
| PyObject *result; |
| PyObject *s = PySequence_List(iterable); |
| if (s == NULL) |
| return NULL; |
| result = deque_extendleft(deque, s); |
| Py_DECREF(s); |
| return result; |
| } |
| |
| it = PyObject_GetIter(iterable); |
| if (it == NULL) |
| return NULL; |
| |
| if (deque->maxlen == 0) |
| return consume_iterator(it); |
| |
| while ((item = PyIter_Next(it)) != NULL) { |
| deque->state++; |
| if (deque->leftindex == 0) { |
| block *b = newblock(NULL, deque->leftblock, |
| deque->len); |
| if (b == NULL) { |
| Py_DECREF(item); |
| Py_DECREF(it); |
| return NULL; |
| } |
| assert(deque->leftblock->leftlink == NULL); |
| deque->leftblock->leftlink = b; |
| deque->leftblock = b; |
| deque->leftindex = BLOCKLEN; |
| } |
| deque->len++; |
| deque->leftindex--; |
| deque->leftblock->data[deque->leftindex] = item; |
| TRIM(deque, deque_pop); |
| } |
| Py_DECREF(it); |
| if (PyErr_Occurred()) |
| return NULL; |
| Py_RETURN_NONE; |
| } |
| |
| PyDoc_STRVAR(extendleft_doc, |
| "Extend the left side of the deque with elements from the iterable"); |
| |
| static PyObject * |
| deque_inplace_concat(dequeobject *deque, PyObject *other) |
| { |
| PyObject *result; |
| |
| result = deque_extend(deque, other); |
| if (result == NULL) |
| return result; |
| Py_DECREF(result); |
| Py_INCREF(deque); |
| return (PyObject *)deque; |
| } |
| |
| static int |
| _deque_rotate(dequeobject *deque, Py_ssize_t n) |
| { |
| Py_ssize_t i, len=deque->len, halflen=(len+1)>>1; |
| PyObject *item, *rv; |
| |
| if (len == 0) |
| return 0; |
| if (n > halflen || n < -halflen) { |
| n %= len; |
| if (n > halflen) |
| n -= len; |
| else if (n < -halflen) |
| n += len; |
| } |
| |
| for (i=0 ; i<n ; i++) { |
| item = deque_pop(deque, NULL); |
| assert (item != NULL); |
| rv = deque_appendleft(deque, item); |
| Py_DECREF(item); |
| if (rv == NULL) |
| return -1; |
| Py_DECREF(rv); |
| } |
| for (i=0 ; i>n ; i--) { |
| item = deque_popleft(deque, NULL); |
| assert (item != NULL); |
| rv = deque_append(deque, item); |
| Py_DECREF(item); |
| if (rv == NULL) |
| return -1; |
| Py_DECREF(rv); |
| } |
| return 0; |
| } |
| |
| static PyObject * |
| deque_rotate(dequeobject *deque, PyObject *args) |
| { |
| Py_ssize_t n=1; |
| |
| if (!PyArg_ParseTuple(args, "|n:rotate", &n)) |
| return NULL; |
| if (_deque_rotate(deque, n) == 0) |
| Py_RETURN_NONE; |
| return NULL; |
| } |
| |
| PyDoc_STRVAR(rotate_doc, |
| "Rotate the deque n steps to the right (default n=1). If n is negative, rotates left."); |
| |
| static PyObject * |
| deque_reverse(dequeobject *deque, PyObject *unused) |
| { |
| block *leftblock = deque->leftblock; |
| block *rightblock = deque->rightblock; |
| Py_ssize_t leftindex = deque->leftindex; |
| Py_ssize_t rightindex = deque->rightindex; |
| Py_ssize_t n = (deque->len)/2; |
| Py_ssize_t i; |
| PyObject *tmp; |
| |
| for (i=0 ; i<n ; i++) { |
| /* Validate that pointers haven't met in the middle */ |
| assert(leftblock != rightblock || leftindex < rightindex); |
| |
| /* Swap */ |
| tmp = leftblock->data[leftindex]; |
| leftblock->data[leftindex] = rightblock->data[rightindex]; |
| rightblock->data[rightindex] = tmp; |
| |
| /* Advance left block/index pair */ |
| leftindex++; |
| if (leftindex == BLOCKLEN) { |
| if (leftblock->rightlink == NULL) |
| break; |
| leftblock = leftblock->rightlink; |
| leftindex = 0; |
| } |
| |
| /* Step backwards with the right block/index pair */ |
| rightindex--; |
| if (rightindex == -1) { |
| if (rightblock->leftlink == NULL) |
| break; |
| rightblock = rightblock->leftlink; |
| rightindex = BLOCKLEN - 1; |
| } |
| } |
| Py_RETURN_NONE; |
| } |
| |
| PyDoc_STRVAR(reverse_doc, |
| "D.reverse() -- reverse *IN PLACE*"); |
| |
| static PyObject * |
| deque_count(dequeobject *deque, PyObject *v) |
| { |
| block *leftblock = deque->leftblock; |
| Py_ssize_t leftindex = deque->leftindex; |
| Py_ssize_t n = deque->len; |
| Py_ssize_t i; |
| Py_ssize_t count = 0; |
| PyObject *item; |
| long start_state = deque->state; |
| int cmp; |
| |
| for (i=0 ; i<n ; i++) { |
| item = leftblock->data[leftindex]; |
| cmp = PyObject_RichCompareBool(item, v, Py_EQ); |
| if (cmp > 0) |
| count++; |
| else if (cmp < 0) |
| return NULL; |
| |
| if (start_state != deque->state) { |
| PyErr_SetString(PyExc_RuntimeError, |
| "deque mutated during iteration"); |
| return NULL; |
| } |
| |
| /* Advance left block/index pair */ |
| leftindex++; |
| if (leftindex == BLOCKLEN) { |
| if (leftblock->rightlink == NULL) /* can occur when i==n-1 */ |
| break; |
| leftblock = leftblock->rightlink; |
| leftindex = 0; |
| } |
| } |
| return PyLong_FromSsize_t(count); |
| } |
| |
| PyDoc_STRVAR(count_doc, |
| "D.count(value) -> integer -- return number of occurrences of value"); |
| |
| static Py_ssize_t |
| deque_len(dequeobject *deque) |
| { |
| return deque->len; |
| } |
| |
| static PyObject * |
| deque_remove(dequeobject *deque, PyObject *value) |
| { |
| Py_ssize_t i, n=deque->len; |
| |
| for (i=0 ; i<n ; i++) { |
| PyObject *item = deque->leftblock->data[deque->leftindex]; |
| int cmp = PyObject_RichCompareBool(item, value, Py_EQ); |
| |
| if (deque->len != n) { |
| PyErr_SetString(PyExc_IndexError, |
| "deque mutated during remove()."); |
| return NULL; |
| } |
| if (cmp > 0) { |
| PyObject *tgt = deque_popleft(deque, NULL); |
| assert (tgt != NULL); |
| Py_DECREF(tgt); |
| if (_deque_rotate(deque, i) == -1) |
| return NULL; |
| Py_RETURN_NONE; |
| } |
| else if (cmp < 0) { |
| _deque_rotate(deque, i); |
| return NULL; |
| } |
| _deque_rotate(deque, -1); |
| } |
| PyErr_SetString(PyExc_ValueError, "deque.remove(x): x not in deque"); |
| return NULL; |
| } |
| |
| PyDoc_STRVAR(remove_doc, |
| "D.remove(value) -- remove first occurrence of value."); |
| |
| static int |
| deque_clear(dequeobject *deque) |
| { |
| PyObject *item; |
| |
| while (deque->len) { |
| item = deque_pop(deque, NULL); |
| assert (item != NULL); |
| Py_DECREF(item); |
| } |
| assert(deque->leftblock == deque->rightblock && |
| deque->leftindex - 1 == deque->rightindex && |
| deque->len == 0); |
| return 0; |
| } |
| |
| static PyObject * |
| deque_item(dequeobject *deque, Py_ssize_t i) |
| { |
| block *b; |
| PyObject *item; |
| Py_ssize_t n, index=i; |
| |
| if (i < 0 || i >= deque->len) { |
| PyErr_SetString(PyExc_IndexError, |
| "deque index out of range"); |
| return NULL; |
| } |
| |
| if (i == 0) { |
| i = deque->leftindex; |
| b = deque->leftblock; |
| } else if (i == deque->len - 1) { |
| i = deque->rightindex; |
| b = deque->rightblock; |
| } else { |
| i += deque->leftindex; |
| n = i / BLOCKLEN; |
| i %= BLOCKLEN; |
| if (index < (deque->len >> 1)) { |
| b = deque->leftblock; |
| while (n--) |
| b = b->rightlink; |
| } else { |
| n = (deque->leftindex + deque->len - 1) / BLOCKLEN - n; |
| b = deque->rightblock; |
| while (n--) |
| b = b->leftlink; |
| } |
| } |
| item = b->data[i]; |
| Py_INCREF(item); |
| return item; |
| } |
| |
| /* delitem() implemented in terms of rotate for simplicity and reasonable |
| performance near the end points. If for some reason this method becomes |
| popular, it is not hard to re-implement this using direct data movement |
| (similar to code in list slice assignment) and achieve a two or threefold |
| performance boost. |
| */ |
| |
| static int |
| deque_del_item(dequeobject *deque, Py_ssize_t i) |
| { |
| PyObject *item; |
| |
| assert (i >= 0 && i < deque->len); |
| if (_deque_rotate(deque, -i) == -1) |
| return -1; |
| |
| item = deque_popleft(deque, NULL); |
| assert (item != NULL); |
| Py_DECREF(item); |
| |
| return _deque_rotate(deque, i); |
| } |
| |
| static int |
| deque_ass_item(dequeobject *deque, Py_ssize_t i, PyObject *v) |
| { |
| PyObject *old_value; |
| block *b; |
| Py_ssize_t n, len=deque->len, halflen=(len+1)>>1, index=i; |
| |
| if (i < 0 || i >= len) { |
| PyErr_SetString(PyExc_IndexError, |
| "deque index out of range"); |
| return -1; |
| } |
| if (v == NULL) |
| return deque_del_item(deque, i); |
| |
| i += deque->leftindex; |
| n = i / BLOCKLEN; |
| i %= BLOCKLEN; |
| if (index <= halflen) { |
| b = deque->leftblock; |
| while (n--) |
| b = b->rightlink; |
| } else { |
| n = (deque->leftindex + len - 1) / BLOCKLEN - n; |
| b = deque->rightblock; |
| while (n--) |
| b = b->leftlink; |
| } |
| Py_INCREF(v); |
| old_value = b->data[i]; |
| b->data[i] = v; |
| Py_DECREF(old_value); |
| return 0; |
| } |
| |
| static PyObject * |
| deque_clearmethod(dequeobject *deque) |
| { |
| int rv; |
| |
| rv = deque_clear(deque); |
| assert (rv != -1); |
| Py_RETURN_NONE; |
| } |
| |
| PyDoc_STRVAR(clear_doc, "Remove all elements from the deque."); |
| |
| static void |
| deque_dealloc(dequeobject *deque) |
| { |
| PyObject_GC_UnTrack(deque); |
| if (deque->weakreflist != NULL) |
| PyObject_ClearWeakRefs((PyObject *) deque); |
| if (deque->leftblock != NULL) { |
| deque_clear(deque); |
| assert(deque->leftblock != NULL); |
| freeblock(deque->leftblock); |
| } |
| deque->leftblock = NULL; |
| deque->rightblock = NULL; |
| Py_TYPE(deque)->tp_free(deque); |
| } |
| |
| static int |
| deque_traverse(dequeobject *deque, visitproc visit, void *arg) |
| { |
| block *b; |
| PyObject *item; |
| Py_ssize_t index; |
| Py_ssize_t indexlo = deque->leftindex; |
| |
| for (b = deque->leftblock; b != NULL; b = b->rightlink) { |
| const Py_ssize_t indexhi = b == deque->rightblock ? |
| deque->rightindex : |
| BLOCKLEN - 1; |
| |
| for (index = indexlo; index <= indexhi; ++index) { |
| item = b->data[index]; |
| Py_VISIT(item); |
| } |
| indexlo = 0; |
| } |
| return 0; |
| } |
| |
| static PyObject * |
| deque_copy(PyObject *deque) |
| { |
| if (((dequeobject *)deque)->maxlen == -1) |
| return PyObject_CallFunction((PyObject *)(Py_TYPE(deque)), "O", deque, NULL); |
| else |
| return PyObject_CallFunction((PyObject *)(Py_TYPE(deque)), "Oi", |
| deque, ((dequeobject *)deque)->maxlen, NULL); |
| } |
| |
| PyDoc_STRVAR(copy_doc, "Return a shallow copy of a deque."); |
| |
| static PyObject * |
| deque_reduce(dequeobject *deque) |
| { |
| PyObject *dict, *result, *aslist; |
| |
| dict = PyObject_GetAttrString((PyObject *)deque, "__dict__"); |
| if (dict == NULL) |
| PyErr_Clear(); |
| aslist = PySequence_List((PyObject *)deque); |
| if (aslist == NULL) { |
| Py_XDECREF(dict); |
| return NULL; |
| } |
| if (dict == NULL) { |
| if (deque->maxlen == -1) |
| result = Py_BuildValue("O(O)", Py_TYPE(deque), aslist); |
| else |
| result = Py_BuildValue("O(On)", Py_TYPE(deque), aslist, deque->maxlen); |
| } else { |
| if (deque->maxlen == -1) |
| result = Py_BuildValue("O(OO)O", Py_TYPE(deque), aslist, Py_None, dict); |
| else |
| result = Py_BuildValue("O(On)O", Py_TYPE(deque), aslist, deque->maxlen, dict); |
| } |
| Py_XDECREF(dict); |
| Py_DECREF(aslist); |
| return result; |
| } |
| |
| PyDoc_STRVAR(reduce_doc, "Return state information for pickling."); |
| |
| static PyObject * |
| deque_repr(PyObject *deque) |
| { |
| PyObject *aslist, *result; |
| int i; |
| |
| i = Py_ReprEnter(deque); |
| if (i != 0) { |
| if (i < 0) |
| return NULL; |
| return PyUnicode_FromString("[...]"); |
| } |
| |
| aslist = PySequence_List(deque); |
| if (aslist == NULL) { |
| Py_ReprLeave(deque); |
| return NULL; |
| } |
| if (((dequeobject *)deque)->maxlen != -1) |
| |
| result = PyUnicode_FromFormat("deque(%R, maxlen=%zd)", |
| aslist, ((dequeobject *)deque)->maxlen); |
| else |
| result = PyUnicode_FromFormat("deque(%R)", aslist); |
| Py_DECREF(aslist); |
| Py_ReprLeave(deque); |
| return result; |
| } |
| |
| static PyObject * |
| deque_richcompare(PyObject *v, PyObject *w, int op) |
| { |
| PyObject *it1=NULL, *it2=NULL, *x, *y; |
| Py_ssize_t vs, ws; |
| int b, cmp=-1; |
| |
| if (!PyObject_TypeCheck(v, &deque_type) || |
| !PyObject_TypeCheck(w, &deque_type)) { |
| Py_INCREF(Py_NotImplemented); |
| return Py_NotImplemented; |
| } |
| |
| /* Shortcuts */ |
| vs = ((dequeobject *)v)->len; |
| ws = ((dequeobject *)w)->len; |
| if (op == Py_EQ) { |
| if (v == w) |
| Py_RETURN_TRUE; |
| if (vs != ws) |
| Py_RETURN_FALSE; |
| } |
| if (op == Py_NE) { |
| if (v == w) |
| Py_RETURN_FALSE; |
| if (vs != ws) |
| Py_RETURN_TRUE; |
| } |
| |
| /* Search for the first index where items are different */ |
| it1 = PyObject_GetIter(v); |
| if (it1 == NULL) |
| goto done; |
| it2 = PyObject_GetIter(w); |
| if (it2 == NULL) |
| goto done; |
| for (;;) { |
| x = PyIter_Next(it1); |
| if (x == NULL && PyErr_Occurred()) |
| goto done; |
| y = PyIter_Next(it2); |
| if (x == NULL || y == NULL) |
| break; |
| b = PyObject_RichCompareBool(x, y, Py_EQ); |
| if (b == 0) { |
| cmp = PyObject_RichCompareBool(x, y, op); |
| Py_DECREF(x); |
| Py_DECREF(y); |
| goto done; |
| } |
| Py_DECREF(x); |
| Py_DECREF(y); |
| if (b == -1) |
| goto done; |
| } |
| /* We reached the end of one deque or both */ |
| Py_XDECREF(x); |
| Py_XDECREF(y); |
| if (PyErr_Occurred()) |
| goto done; |
| switch (op) { |
| case Py_LT: cmp = y != NULL; break; /* if w was longer */ |
| case Py_LE: cmp = x == NULL; break; /* if v was not longer */ |
| case Py_EQ: cmp = x == y; break; /* if we reached the end of both */ |
| case Py_NE: cmp = x != y; break; /* if one deque continues */ |
| case Py_GT: cmp = x != NULL; break; /* if v was longer */ |
| case Py_GE: cmp = y == NULL; break; /* if w was not longer */ |
| } |
| |
| done: |
| Py_XDECREF(it1); |
| Py_XDECREF(it2); |
| if (cmp == 1) |
| Py_RETURN_TRUE; |
| if (cmp == 0) |
| Py_RETURN_FALSE; |
| return NULL; |
| } |
| |
| static int |
| deque_init(dequeobject *deque, PyObject *args, PyObject *kwdargs) |
| { |
| PyObject *iterable = NULL; |
| PyObject *maxlenobj = NULL; |
| Py_ssize_t maxlen = -1; |
| char *kwlist[] = {"iterable", "maxlen", 0}; |
| |
| if (!PyArg_ParseTupleAndKeywords(args, kwdargs, "|OO:deque", kwlist, &iterable, &maxlenobj)) |
| return -1; |
| if (maxlenobj != NULL && maxlenobj != Py_None) { |
| maxlen = PyLong_AsSsize_t(maxlenobj); |
| if (maxlen == -1 && PyErr_Occurred()) |
| return -1; |
| if (maxlen < 0) { |
| PyErr_SetString(PyExc_ValueError, "maxlen must be non-negative"); |
| return -1; |
| } |
| } |
| deque->maxlen = maxlen; |
| deque_clear(deque); |
| if (iterable != NULL) { |
| PyObject *rv = deque_extend(deque, iterable); |
| if (rv == NULL) |
| return -1; |
| Py_DECREF(rv); |
| } |
| return 0; |
| } |
| |
| static PyObject * |
| deque_get_maxlen(dequeobject *deque) |
| { |
| if (deque->maxlen == -1) |
| Py_RETURN_NONE; |
| return PyLong_FromSsize_t(deque->maxlen); |
| } |
| |
| static PyGetSetDef deque_getset[] = { |
| {"maxlen", (getter)deque_get_maxlen, (setter)NULL, |
| "maximum size of a deque or None if unbounded"}, |
| {0} |
| }; |
| |
| static PySequenceMethods deque_as_sequence = { |
| (lenfunc)deque_len, /* sq_length */ |
| 0, /* sq_concat */ |
| 0, /* sq_repeat */ |
| (ssizeargfunc)deque_item, /* sq_item */ |
| 0, /* sq_slice */ |
| (ssizeobjargproc)deque_ass_item, /* sq_ass_item */ |
| 0, /* sq_ass_slice */ |
| 0, /* sq_contains */ |
| (binaryfunc)deque_inplace_concat, /* sq_inplace_concat */ |
| 0, /* sq_inplace_repeat */ |
| |
| }; |
| |
| /* deque object ********************************************************/ |
| |
| static PyObject *deque_iter(dequeobject *deque); |
| static PyObject *deque_reviter(dequeobject *deque); |
| PyDoc_STRVAR(reversed_doc, |
| "D.__reversed__() -- return a reverse iterator over the deque"); |
| |
| static PyMethodDef deque_methods[] = { |
| {"append", (PyCFunction)deque_append, |
| METH_O, append_doc}, |
| {"appendleft", (PyCFunction)deque_appendleft, |
| METH_O, appendleft_doc}, |
| {"clear", (PyCFunction)deque_clearmethod, |
| METH_NOARGS, clear_doc}, |
| {"__copy__", (PyCFunction)deque_copy, |
| METH_NOARGS, copy_doc}, |
| {"count", (PyCFunction)deque_count, |
| METH_O, count_doc}, |
| {"extend", (PyCFunction)deque_extend, |
| METH_O, extend_doc}, |
| {"extendleft", (PyCFunction)deque_extendleft, |
| METH_O, extendleft_doc}, |
| {"pop", (PyCFunction)deque_pop, |
| METH_NOARGS, pop_doc}, |
| {"popleft", (PyCFunction)deque_popleft, |
| METH_NOARGS, popleft_doc}, |
| {"__reduce__", (PyCFunction)deque_reduce, |
| METH_NOARGS, reduce_doc}, |
| {"remove", (PyCFunction)deque_remove, |
| METH_O, remove_doc}, |
| {"__reversed__", (PyCFunction)deque_reviter, |
| METH_NOARGS, reversed_doc}, |
| {"reverse", (PyCFunction)deque_reverse, |
| METH_NOARGS, reverse_doc}, |
| {"rotate", (PyCFunction)deque_rotate, |
| METH_VARARGS, rotate_doc}, |
| {NULL, NULL} /* sentinel */ |
| }; |
| |
| PyDoc_STRVAR(deque_doc, |
| "deque(iterable[, maxlen]) --> deque object\n\ |
| \n\ |
| Build an ordered collection accessible from endpoints only."); |
| |
| static PyTypeObject deque_type = { |
| PyVarObject_HEAD_INIT(NULL, 0) |
| "collections.deque", /* tp_name */ |
| sizeof(dequeobject), /* tp_basicsize */ |
| 0, /* tp_itemsize */ |
| /* methods */ |
| (destructor)deque_dealloc, /* tp_dealloc */ |
| 0, /* tp_print */ |
| 0, /* tp_getattr */ |
| 0, /* tp_setattr */ |
| 0, /* tp_reserved */ |
| deque_repr, /* tp_repr */ |
| 0, /* tp_as_number */ |
| &deque_as_sequence, /* tp_as_sequence */ |
| 0, /* tp_as_mapping */ |
| PyObject_HashNotImplemented, /* tp_hash */ |
| 0, /* tp_call */ |
| 0, /* tp_str */ |
| PyObject_GenericGetAttr, /* tp_getattro */ |
| 0, /* tp_setattro */ |
| 0, /* tp_as_buffer */ |
| Py_TPFLAGS_DEFAULT | Py_TPFLAGS_BASETYPE | Py_TPFLAGS_HAVE_GC, |
| /* tp_flags */ |
| deque_doc, /* tp_doc */ |
| (traverseproc)deque_traverse, /* tp_traverse */ |
| (inquiry)deque_clear, /* tp_clear */ |
| (richcmpfunc)deque_richcompare, /* tp_richcompare */ |
| offsetof(dequeobject, weakreflist), /* tp_weaklistoffset*/ |
| (getiterfunc)deque_iter, /* tp_iter */ |
| 0, /* tp_iternext */ |
| deque_methods, /* tp_methods */ |
| 0, /* tp_members */ |
| deque_getset, /* tp_getset */ |
| 0, /* tp_base */ |
| 0, /* tp_dict */ |
| 0, /* tp_descr_get */ |
| 0, /* tp_descr_set */ |
| 0, /* tp_dictoffset */ |
| (initproc)deque_init, /* tp_init */ |
| PyType_GenericAlloc, /* tp_alloc */ |
| deque_new, /* tp_new */ |
| PyObject_GC_Del, /* tp_free */ |
| }; |
| |
| /*********************** Deque Iterator **************************/ |
| |
| typedef struct { |
| PyObject_HEAD |
| Py_ssize_t index; |
| block *b; |
| dequeobject *deque; |
| long state; /* state when the iterator is created */ |
| Py_ssize_t counter; /* number of items remaining for iteration */ |
| } dequeiterobject; |
| |
| static PyTypeObject dequeiter_type; |
| |
| static PyObject * |
| deque_iter(dequeobject *deque) |
| { |
| dequeiterobject *it; |
| |
| it = PyObject_GC_New(dequeiterobject, &dequeiter_type); |
| if (it == NULL) |
| return NULL; |
| it->b = deque->leftblock; |
| it->index = deque->leftindex; |
| Py_INCREF(deque); |
| it->deque = deque; |
| it->state = deque->state; |
| it->counter = deque->len; |
| PyObject_GC_Track(it); |
| return (PyObject *)it; |
| } |
| |
| static int |
| dequeiter_traverse(dequeiterobject *dio, visitproc visit, void *arg) |
| { |
| Py_VISIT(dio->deque); |
| return 0; |
| } |
| |
| static void |
| dequeiter_dealloc(dequeiterobject *dio) |
| { |
| Py_XDECREF(dio->deque); |
| PyObject_GC_Del(dio); |
| } |
| |
| static PyObject * |
| dequeiter_next(dequeiterobject *it) |
| { |
| PyObject *item; |
| |
| if (it->deque->state != it->state) { |
| it->counter = 0; |
| PyErr_SetString(PyExc_RuntimeError, |
| "deque mutated during iteration"); |
| return NULL; |
| } |
| if (it->counter == 0) |
| return NULL; |
| assert (!(it->b == it->deque->rightblock && |
| it->index > it->deque->rightindex)); |
| |
| item = it->b->data[it->index]; |
| it->index++; |
| it->counter--; |
| if (it->index == BLOCKLEN && it->counter > 0) { |
| assert (it->b->rightlink != NULL); |
| it->b = it->b->rightlink; |
| it->index = 0; |
| } |
| Py_INCREF(item); |
| return item; |
| } |
| |
| static PyObject * |
| dequeiter_len(dequeiterobject *it) |
| { |
| return PyLong_FromSsize_t(it->counter); |
| } |
| |
| PyDoc_STRVAR(length_hint_doc, "Private method returning an estimate of len(list(it))."); |
| |
| static PyMethodDef dequeiter_methods[] = { |
| {"__length_hint__", (PyCFunction)dequeiter_len, METH_NOARGS, length_hint_doc}, |
| {NULL, NULL} /* sentinel */ |
| }; |
| |
| static PyTypeObject dequeiter_type = { |
| PyVarObject_HEAD_INIT(NULL, 0) |
| "deque_iterator", /* tp_name */ |
| sizeof(dequeiterobject), /* tp_basicsize */ |
| 0, /* tp_itemsize */ |
| /* methods */ |
| (destructor)dequeiter_dealloc, /* tp_dealloc */ |
| 0, /* tp_print */ |
| 0, /* tp_getattr */ |
| 0, /* tp_setattr */ |
| 0, /* tp_reserved */ |
| 0, /* tp_repr */ |
| 0, /* tp_as_number */ |
| 0, /* tp_as_sequence */ |
| 0, /* tp_as_mapping */ |
| 0, /* tp_hash */ |
| 0, /* tp_call */ |
| 0, /* tp_str */ |
| PyObject_GenericGetAttr, /* tp_getattro */ |
| 0, /* tp_setattro */ |
| 0, /* tp_as_buffer */ |
| Py_TPFLAGS_DEFAULT | Py_TPFLAGS_HAVE_GC,/* tp_flags */ |
| 0, /* tp_doc */ |
| (traverseproc)dequeiter_traverse, /* tp_traverse */ |
| 0, /* tp_clear */ |
| 0, /* tp_richcompare */ |
| 0, /* tp_weaklistoffset */ |
| PyObject_SelfIter, /* tp_iter */ |
| (iternextfunc)dequeiter_next, /* tp_iternext */ |
| dequeiter_methods, /* tp_methods */ |
| 0, |
| }; |
| |
| /*********************** Deque Reverse Iterator **************************/ |
| |
| static PyTypeObject dequereviter_type; |
| |
| static PyObject * |
| deque_reviter(dequeobject *deque) |
| { |
| dequeiterobject *it; |
| |
| it = PyObject_GC_New(dequeiterobject, &dequereviter_type); |
| if (it == NULL) |
| return NULL; |
| it->b = deque->rightblock; |
| it->index = deque->rightindex; |
| Py_INCREF(deque); |
| it->deque = deque; |
| it->state = deque->state; |
| it->counter = deque->len; |
| PyObject_GC_Track(it); |
| return (PyObject *)it; |
| } |
| |
| static PyObject * |
| dequereviter_next(dequeiterobject *it) |
| { |
| PyObject *item; |
| if (it->counter == 0) |
| return NULL; |
| |
| if (it->deque->state != it->state) { |
| it->counter = 0; |
| PyErr_SetString(PyExc_RuntimeError, |
| "deque mutated during iteration"); |
| return NULL; |
| } |
| assert (!(it->b == it->deque->leftblock && |
| it->index < it->deque->leftindex)); |
| |
| item = it->b->data[it->index]; |
| it->index--; |
| it->counter--; |
| if (it->index == -1 && it->counter > 0) { |
| assert (it->b->leftlink != NULL); |
| it->b = it->b->leftlink; |
| it->index = BLOCKLEN - 1; |
| } |
| Py_INCREF(item); |
| return item; |
| } |
| |
| static PyTypeObject dequereviter_type = { |
| PyVarObject_HEAD_INIT(NULL, 0) |
| "deque_reverse_iterator", /* tp_name */ |
| sizeof(dequeiterobject), /* tp_basicsize */ |
| 0, /* tp_itemsize */ |
| /* methods */ |
| (destructor)dequeiter_dealloc, /* tp_dealloc */ |
| 0, /* tp_print */ |
| 0, /* tp_getattr */ |
| 0, /* tp_setattr */ |
| 0, /* tp_reserved */ |
| 0, /* tp_repr */ |
| 0, /* tp_as_number */ |
| 0, /* tp_as_sequence */ |
| 0, /* tp_as_mapping */ |
| 0, /* tp_hash */ |
| 0, /* tp_call */ |
| 0, /* tp_str */ |
| PyObject_GenericGetAttr, /* tp_getattro */ |
| 0, /* tp_setattro */ |
| 0, /* tp_as_buffer */ |
| Py_TPFLAGS_DEFAULT | Py_TPFLAGS_HAVE_GC,/* tp_flags */ |
| 0, /* tp_doc */ |
| (traverseproc)dequeiter_traverse, /* tp_traverse */ |
| 0, /* tp_clear */ |
| 0, /* tp_richcompare */ |
| 0, /* tp_weaklistoffset */ |
| PyObject_SelfIter, /* tp_iter */ |
| (iternextfunc)dequereviter_next, /* tp_iternext */ |
| dequeiter_methods, /* tp_methods */ |
| 0, |
| }; |
| |
| /* defaultdict type *********************************************************/ |
| |
| typedef struct { |
| PyDictObject dict; |
| PyObject *default_factory; |
| } defdictobject; |
| |
| static PyTypeObject defdict_type; /* Forward */ |
| |
| PyDoc_STRVAR(defdict_missing_doc, |
| "__missing__(key) # Called by __getitem__ for missing key; pseudo-code:\n\ |
| if self.default_factory is None: raise KeyError((key,))\n\ |
| self[key] = value = self.default_factory()\n\ |
| return value\n\ |
| "); |
| |
| static PyObject * |
| defdict_missing(defdictobject *dd, PyObject *key) |
| { |
| PyObject *factory = dd->default_factory; |
| PyObject *value; |
| if (factory == NULL || factory == Py_None) { |
| /* XXX Call dict.__missing__(key) */ |
| PyObject *tup; |
| tup = PyTuple_Pack(1, key); |
| if (!tup) return NULL; |
| PyErr_SetObject(PyExc_KeyError, tup); |
| Py_DECREF(tup); |
| return NULL; |
| } |
| value = PyEval_CallObject(factory, NULL); |
| if (value == NULL) |
| return value; |
| if (PyObject_SetItem((PyObject *)dd, key, value) < 0) { |
| Py_DECREF(value); |
| return NULL; |
| } |
| return value; |
| } |
| |
| PyDoc_STRVAR(defdict_copy_doc, "D.copy() -> a shallow copy of D."); |
| |
| static PyObject * |
| defdict_copy(defdictobject *dd) |
| { |
| /* This calls the object's class. That only works for subclasses |
| whose class constructor has the same signature. Subclasses that |
| define a different constructor signature must override copy(). |
| */ |
| |
| if (dd->default_factory == NULL) |
| return PyObject_CallFunctionObjArgs((PyObject*)Py_TYPE(dd), Py_None, dd, NULL); |
| return PyObject_CallFunctionObjArgs((PyObject*)Py_TYPE(dd), |
| dd->default_factory, dd, NULL); |
| } |
| |
| static PyObject * |
| defdict_reduce(defdictobject *dd) |
| { |
| /* __reduce__ must return a 5-tuple as follows: |
| |
| - factory function |
| - tuple of args for the factory function |
| - additional state (here None) |
| - sequence iterator (here None) |
| - dictionary iterator (yielding successive (key, value) pairs |
| |
| This API is used by pickle.py and copy.py. |
| |
| For this to be useful with pickle.py, the default_factory |
| must be picklable; e.g., None, a built-in, or a global |
| function in a module or package. |
| |
| Both shallow and deep copying are supported, but for deep |
| copying, the default_factory must be deep-copyable; e.g. None, |
| or a built-in (functions are not copyable at this time). |
| |
| This only works for subclasses as long as their constructor |
| signature is compatible; the first argument must be the |
| optional default_factory, defaulting to None. |
| */ |
| PyObject *args; |
| PyObject *items; |
| PyObject *iter; |
| PyObject *result; |
| if (dd->default_factory == NULL || dd->default_factory == Py_None) |
| args = PyTuple_New(0); |
| else |
| args = PyTuple_Pack(1, dd->default_factory); |
| if (args == NULL) |
| return NULL; |
| items = PyObject_CallMethod((PyObject *)dd, "items", "()"); |
| if (items == NULL) { |
| Py_DECREF(args); |
| return NULL; |
| } |
| iter = PyObject_GetIter(items); |
| if (iter == NULL) { |
| Py_DECREF(items); |
| Py_DECREF(args); |
| return NULL; |
| } |
| result = PyTuple_Pack(5, Py_TYPE(dd), args, |
| Py_None, Py_None, iter); |
| Py_DECREF(iter); |
| Py_DECREF(items); |
| Py_DECREF(args); |
| return result; |
| } |
| |
| static PyMethodDef defdict_methods[] = { |
| {"__missing__", (PyCFunction)defdict_missing, METH_O, |
| defdict_missing_doc}, |
| {"copy", (PyCFunction)defdict_copy, METH_NOARGS, |
| defdict_copy_doc}, |
| {"__copy__", (PyCFunction)defdict_copy, METH_NOARGS, |
| defdict_copy_doc}, |
| {"__reduce__", (PyCFunction)defdict_reduce, METH_NOARGS, |
| reduce_doc}, |
| {NULL} |
| }; |
| |
| static PyMemberDef defdict_members[] = { |
| {"default_factory", T_OBJECT, |
| offsetof(defdictobject, default_factory), 0, |
| PyDoc_STR("Factory for default value called by __missing__().")}, |
| {NULL} |
| }; |
| |
| static void |
| defdict_dealloc(defdictobject *dd) |
| { |
| Py_CLEAR(dd->default_factory); |
| PyDict_Type.tp_dealloc((PyObject *)dd); |
| } |
| |
| static PyObject * |
| defdict_repr(defdictobject *dd) |
| { |
| PyObject *baserepr; |
| PyObject *defrepr; |
| PyObject *result; |
| baserepr = PyDict_Type.tp_repr((PyObject *)dd); |
| if (baserepr == NULL) |
| return NULL; |
| if (dd->default_factory == NULL) |
| defrepr = PyUnicode_FromString("None"); |
| else |
| { |
| int status = Py_ReprEnter(dd->default_factory); |
| if (status != 0) { |
| if (status < 0) |
| return NULL; |
| defrepr = PyUnicode_FromString("..."); |
| } |
| else |
| defrepr = PyObject_Repr(dd->default_factory); |
| Py_ReprLeave(dd->default_factory); |
| } |
| if (defrepr == NULL) { |
| Py_DECREF(baserepr); |
| return NULL; |
| } |
| result = PyUnicode_FromFormat("defaultdict(%U, %U)", |
| defrepr, baserepr); |
| Py_DECREF(defrepr); |
| Py_DECREF(baserepr); |
| return result; |
| } |
| |
| static int |
| defdict_traverse(PyObject *self, visitproc visit, void *arg) |
| { |
| Py_VISIT(((defdictobject *)self)->default_factory); |
| return PyDict_Type.tp_traverse(self, visit, arg); |
| } |
| |
| static int |
| defdict_tp_clear(defdictobject *dd) |
| { |
| Py_CLEAR(dd->default_factory); |
| return PyDict_Type.tp_clear((PyObject *)dd); |
| } |
| |
| static int |
| defdict_init(PyObject *self, PyObject *args, PyObject *kwds) |
| { |
| defdictobject *dd = (defdictobject *)self; |
| PyObject *olddefault = dd->default_factory; |
| PyObject *newdefault = NULL; |
| PyObject *newargs; |
| int result; |
| if (args == NULL || !PyTuple_Check(args)) |
| newargs = PyTuple_New(0); |
| else { |
| Py_ssize_t n = PyTuple_GET_SIZE(args); |
| if (n > 0) { |
| newdefault = PyTuple_GET_ITEM(args, 0); |
| if (!PyCallable_Check(newdefault) && newdefault != Py_None) { |
| PyErr_SetString(PyExc_TypeError, |
| "first argument must be callable"); |
| return -1; |
| } |
| } |
| newargs = PySequence_GetSlice(args, 1, n); |
| } |
| if (newargs == NULL) |
| return -1; |
| Py_XINCREF(newdefault); |
| dd->default_factory = newdefault; |
| result = PyDict_Type.tp_init(self, newargs, kwds); |
| Py_DECREF(newargs); |
| Py_XDECREF(olddefault); |
| return result; |
| } |
| |
| PyDoc_STRVAR(defdict_doc, |
| "defaultdict(default_factory) --> dict with default factory\n\ |
| \n\ |
| The default factory is called without arguments to produce\n\ |
| a new value when a key is not present, in __getitem__ only.\n\ |
| A defaultdict compares equal to a dict with the same items.\n\ |
| "); |
| |
| /* See comment in xxsubtype.c */ |
| #define DEFERRED_ADDRESS(ADDR) 0 |
| |
| static PyTypeObject defdict_type = { |
| PyVarObject_HEAD_INIT(DEFERRED_ADDRESS(&PyType_Type), 0) |
| "collections.defaultdict", /* tp_name */ |
| sizeof(defdictobject), /* tp_basicsize */ |
| 0, /* tp_itemsize */ |
| /* methods */ |
| (destructor)defdict_dealloc, /* tp_dealloc */ |
| 0, /* tp_print */ |
| 0, /* tp_getattr */ |
| 0, /* tp_setattr */ |
| 0, /* tp_reserved */ |
| (reprfunc)defdict_repr, /* tp_repr */ |
| 0, /* tp_as_number */ |
| 0, /* tp_as_sequence */ |
| 0, /* tp_as_mapping */ |
| 0, /* tp_hash */ |
| 0, /* tp_call */ |
| 0, /* tp_str */ |
| PyObject_GenericGetAttr, /* tp_getattro */ |
| 0, /* tp_setattro */ |
| 0, /* tp_as_buffer */ |
| Py_TPFLAGS_DEFAULT | Py_TPFLAGS_BASETYPE | Py_TPFLAGS_HAVE_GC, |
| /* tp_flags */ |
| defdict_doc, /* tp_doc */ |
| defdict_traverse, /* tp_traverse */ |
| (inquiry)defdict_tp_clear, /* tp_clear */ |
| 0, /* tp_richcompare */ |
| 0, /* tp_weaklistoffset*/ |
| 0, /* tp_iter */ |
| 0, /* tp_iternext */ |
| defdict_methods, /* tp_methods */ |
| defdict_members, /* tp_members */ |
| 0, /* tp_getset */ |
| DEFERRED_ADDRESS(&PyDict_Type), /* tp_base */ |
| 0, /* tp_dict */ |
| 0, /* tp_descr_get */ |
| 0, /* tp_descr_set */ |
| 0, /* tp_dictoffset */ |
| defdict_init, /* tp_init */ |
| PyType_GenericAlloc, /* tp_alloc */ |
| 0, /* tp_new */ |
| PyObject_GC_Del, /* tp_free */ |
| }; |
| |
| /* helper function for Counter *********************************************/ |
| |
| PyDoc_STRVAR(_count_elements_doc, |
| "_count_elements(mapping, iterable) -> None\n\ |
| \n\ |
| Count elements in the iterable, updating the mappping"); |
| |
| static PyObject * |
| _count_elements(PyObject *self, PyObject *args) |
| { |
| PyObject *it, *iterable, *mapping, *oldval; |
| PyObject *newval = NULL; |
| PyObject *key = NULL; |
| PyObject *one = NULL; |
| |
| if (!PyArg_UnpackTuple(args, "_count_elements", 2, 2, &mapping, &iterable)) |
| return NULL; |
| |
| it = PyObject_GetIter(iterable); |
| if (it == NULL) |
| return NULL; |
| |
| one = PyLong_FromLong(1); |
| if (one == NULL) { |
| Py_DECREF(it); |
| return NULL; |
| } |
| |
| if (PyDict_CheckExact(mapping)) { |
| while (1) { |
| key = PyIter_Next(it); |
| if (key == NULL) { |
| if (PyErr_Occurred() && PyErr_ExceptionMatches(PyExc_StopIteration)) |
| PyErr_Clear(); |
| else |
| break; |
| } |
| oldval = PyDict_GetItem(mapping, key); |
| if (oldval == NULL) { |
| if (PyDict_SetItem(mapping, key, one) == -1) |
| break; |
| } else { |
| newval = PyNumber_Add(oldval, one); |
| if (newval == NULL) |
| break; |
| if (PyDict_SetItem(mapping, key, newval) == -1) |
| break; |
| Py_CLEAR(newval); |
| } |
| Py_DECREF(key); |
| } |
| } else { |
| while (1) { |
| key = PyIter_Next(it); |
| if (key == NULL) { |
| if (PyErr_Occurred() && PyErr_ExceptionMatches(PyExc_StopIteration)) |
| PyErr_Clear(); |
| else |
| break; |
| } |
| oldval = PyObject_GetItem(mapping, key); |
| if (oldval == NULL) { |
| if (!PyErr_Occurred() || !PyErr_ExceptionMatches(PyExc_KeyError)) |
| break; |
| PyErr_Clear(); |
| Py_INCREF(one); |
| newval = one; |
| } else { |
| newval = PyNumber_Add(oldval, one); |
| Py_DECREF(oldval); |
| if (newval == NULL) |
| break; |
| } |
| if (PyObject_SetItem(mapping, key, newval) == -1) |
| break; |
| Py_CLEAR(newval); |
| Py_DECREF(key); |
| } |
| } |
| |
| Py_DECREF(it); |
| Py_XDECREF(key); |
| Py_XDECREF(newval); |
| Py_DECREF(one); |
| if (PyErr_Occurred()) |
| return NULL; |
| Py_RETURN_NONE; |
| } |
| |
| /* module level code ********************************************************/ |
| |
| PyDoc_STRVAR(module_doc, |
| "High performance data structures.\n\ |
| - deque: ordered collection accessible from endpoints only\n\ |
| - defaultdict: dict subclass with a default value factory\n\ |
| "); |
| |
| static struct PyMethodDef module_functions[] = { |
| {"_count_elements", _count_elements, METH_VARARGS, _count_elements_doc}, |
| {NULL, NULL} /* sentinel */ |
| }; |
| |
| static struct PyModuleDef _collectionsmodule = { |
| PyModuleDef_HEAD_INIT, |
| "_collections", |
| module_doc, |
| -1, |
| module_functions, |
| NULL, |
| NULL, |
| NULL, |
| NULL |
| }; |
| |
| PyMODINIT_FUNC |
| PyInit__collections(void) |
| { |
| PyObject *m; |
| |
| m = PyModule_Create(&_collectionsmodule); |
| if (m == NULL) |
| return NULL; |
| |
| if (PyType_Ready(&deque_type) < 0) |
| return NULL; |
| Py_INCREF(&deque_type); |
| PyModule_AddObject(m, "deque", (PyObject *)&deque_type); |
| |
| defdict_type.tp_base = &PyDict_Type; |
| if (PyType_Ready(&defdict_type) < 0) |
| return NULL; |
| Py_INCREF(&defdict_type); |
| PyModule_AddObject(m, "defaultdict", (PyObject *)&defdict_type); |
| |
| if (PyType_Ready(&dequeiter_type) < 0) |
| return NULL; |
| |
| if (PyType_Ready(&dequereviter_type) < 0) |
| return NULL; |
| |
| return m; |
| } |