| |
| /* set object implementation |
| |
| Written and maintained by Raymond D. Hettinger <python@rcn.com> |
| Derived from Lib/sets.py and Objects/dictobject.c. |
| |
| Copyright (c) 2003-2013 Python Software Foundation. |
| All rights reserved. |
| |
| The basic lookup function used by all operations. |
| This is based on Algorithm D from Knuth Vol. 3, Sec. 6.4. |
| |
| The initial probe index is computed as hash mod the table size. |
| Subsequent probe indices are computed as explained in Objects/dictobject.c. |
| |
| To improve cache locality, each probe inspects a series of consecutive |
| nearby entries before moving on to probes elsewhere in memory. This leaves |
| us with a hybrid of linear probing and open addressing. The linear probing |
| reduces the cost of hash collisions because consecutive memory accesses |
| tend to be much cheaper than scattered probes. After LINEAR_PROBES steps, |
| we then use open addressing with the upper bits from the hash value. This |
| helps break-up long chains of collisions. |
| |
| All arithmetic on hash should ignore overflow. |
| |
| Unlike the dictionary implementation, the lookkey functions can return |
| NULL if the rich comparison returns an error. |
| */ |
| |
| #include "Python.h" |
| #include "structmember.h" |
| #include "stringlib/eq.h" |
| |
| /* Object used as dummy key to fill deleted entries */ |
| static PyObject _dummy_struct; |
| |
| #define dummy (&_dummy_struct) |
| |
| |
| /* ======================================================================== */ |
| /* ======= Begin logic for probing the hash table ========================= */ |
| |
| /* Set this to zero to turn-off linear probing */ |
| #ifndef LINEAR_PROBES |
| #define LINEAR_PROBES 9 |
| #endif |
| |
| /* This must be >= 1 */ |
| #define PERTURB_SHIFT 5 |
| |
| static setentry * |
| set_lookkey(PySetObject *so, PyObject *key, Py_hash_t hash) |
| { |
| setentry *table = so->table; |
| setentry *freeslot = NULL; |
| setentry *entry; |
| size_t perturb = hash; |
| size_t mask = so->mask; |
| size_t i = (size_t)hash; /* Unsigned for defined overflow behavior. */ |
| size_t j; |
| int cmp; |
| |
| entry = &table[i & mask]; |
| if (entry->key == NULL) |
| return entry; |
| |
| while (1) { |
| if (entry->key == key) |
| return entry; |
| if (entry->hash == hash && entry->key != dummy) { |
| PyObject *startkey = entry->key; |
| Py_INCREF(startkey); |
| cmp = PyObject_RichCompareBool(startkey, key, Py_EQ); |
| Py_DECREF(startkey); |
| if (cmp < 0) |
| return NULL; |
| if (table != so->table || entry->key != startkey) |
| return set_lookkey(so, key, hash); |
| if (cmp > 0) |
| return entry; |
| } |
| if (entry->key == dummy && freeslot == NULL) |
| freeslot = entry; |
| |
| for (j = 1 ; j <= LINEAR_PROBES ; j++) { |
| entry = &table[(i + j) & mask]; |
| if (entry->key == NULL) |
| goto found_null; |
| if (entry->key == key) |
| return entry; |
| if (entry->hash == hash && entry->key != dummy) { |
| PyObject *startkey = entry->key; |
| Py_INCREF(startkey); |
| cmp = PyObject_RichCompareBool(startkey, key, Py_EQ); |
| Py_DECREF(startkey); |
| if (cmp < 0) |
| return NULL; |
| if (table != so->table || entry->key != startkey) |
| return set_lookkey(so, key, hash); |
| if (cmp > 0) |
| return entry; |
| } |
| if (entry->key == dummy && freeslot == NULL) |
| freeslot = entry; |
| } |
| |
| perturb >>= PERTURB_SHIFT; |
| i = i * 5 + 1 + perturb; |
| |
| entry = &table[i & mask]; |
| if (entry->key == NULL) |
| goto found_null; |
| } |
| found_null: |
| return freeslot == NULL ? entry : freeslot; |
| } |
| |
| /* |
| * Hacked up version of set_lookkey which can assume keys are always unicode; |
| * This means we can always use unicode_eq directly and not have to check to |
| * see if the comparison altered the table. |
| */ |
| static setentry * |
| set_lookkey_unicode(PySetObject *so, PyObject *key, Py_hash_t hash) |
| { |
| setentry *table = so->table; |
| setentry *freeslot = NULL; |
| setentry *entry; |
| size_t perturb = hash; |
| size_t mask = so->mask; |
| size_t i = (size_t)hash; |
| size_t j; |
| |
| /* Make sure this function doesn't have to handle non-unicode keys, |
| including subclasses of str; e.g., one reason to subclass |
| strings is to override __eq__, and for speed we don't cater to |
| that here. */ |
| if (!PyUnicode_CheckExact(key)) { |
| so->lookup = set_lookkey; |
| return set_lookkey(so, key, hash); |
| } |
| |
| entry = &table[i & mask]; |
| if (entry->key == NULL) |
| return entry; |
| |
| while (1) { |
| if (entry->key == key |
| || (entry->hash == hash |
| && entry->key != dummy |
| && unicode_eq(entry->key, key))) |
| return entry; |
| if (entry->key == dummy && freeslot == NULL) |
| freeslot = entry; |
| |
| for (j = 1 ; j <= LINEAR_PROBES ; j++) { |
| entry = &table[(i + j) & mask]; |
| if (entry->key == NULL) |
| goto found_null; |
| if (entry->key == key |
| || (entry->hash == hash |
| && entry->key != dummy |
| && unicode_eq(entry->key, key))) |
| return entry; |
| if (entry->key == dummy && freeslot == NULL) |
| freeslot = entry; |
| } |
| |
| perturb >>= PERTURB_SHIFT; |
| i = i * 5 + 1 + perturb; |
| |
| entry = &table[i & mask]; |
| if (entry->key == NULL) |
| goto found_null; |
| } |
| found_null: |
| return freeslot == NULL ? entry : freeslot; |
| } |
| |
| /* |
| Internal routine used by set_table_resize() to insert an item which is |
| known to be absent from the set. This routine also assumes that |
| the set contains no deleted entries. Besides the performance benefit, |
| using set_insert_clean() in set_table_resize() is dangerous (SF bug #1456209). |
| Note that no refcounts are changed by this routine; if needed, the caller |
| is responsible for incref'ing `key`. |
| */ |
| static void |
| set_insert_clean(PySetObject *so, PyObject *key, Py_hash_t hash) |
| { |
| setentry *table = so->table; |
| setentry *entry; |
| size_t perturb = hash; |
| size_t mask = (size_t)so->mask; |
| size_t i = (size_t)hash; |
| size_t j; |
| |
| while (1) { |
| entry = &table[i & mask]; |
| if (entry->key == NULL) |
| goto found_null; |
| for (j = 1 ; j <= LINEAR_PROBES ; j++) { |
| entry = &table[(i + j) & mask]; |
| if (entry->key == NULL) |
| goto found_null; |
| } |
| perturb >>= PERTURB_SHIFT; |
| i = i * 5 + 1 + perturb; |
| } |
| found_null: |
| entry->key = key; |
| entry->hash = hash; |
| so->fill++; |
| so->used++; |
| } |
| |
| /* ======== End logic for probing the hash table ========================== */ |
| /* ======================================================================== */ |
| |
| |
| /* |
| Internal routine to insert a new key into the table. |
| Used by the public insert routine. |
| Eats a reference to key. |
| */ |
| static int |
| set_insert_key(PySetObject *so, PyObject *key, Py_hash_t hash) |
| { |
| setentry *entry; |
| |
| assert(so->lookup != NULL); |
| entry = so->lookup(so, key, hash); |
| if (entry == NULL) |
| return -1; |
| if (entry->key == NULL) { |
| /* UNUSED */ |
| so->fill++; |
| entry->key = key; |
| entry->hash = hash; |
| so->used++; |
| } else if (entry->key == dummy) { |
| /* DUMMY */ |
| entry->key = key; |
| entry->hash = hash; |
| so->used++; |
| } else { |
| /* ACTIVE */ |
| Py_DECREF(key); |
| } |
| return 0; |
| } |
| |
| /* |
| Restructure the table by allocating a new table and reinserting all |
| keys again. When entries have been deleted, the new table may |
| actually be smaller than the old one. |
| */ |
| static int |
| set_table_resize(PySetObject *so, Py_ssize_t minused) |
| { |
| Py_ssize_t newsize; |
| setentry *oldtable, *newtable, *entry; |
| Py_ssize_t i; |
| int is_oldtable_malloced; |
| setentry small_copy[PySet_MINSIZE]; |
| |
| assert(minused >= 0); |
| |
| /* Find the smallest table size > minused. */ |
| for (newsize = PySet_MINSIZE; |
| newsize <= minused && newsize > 0; |
| newsize <<= 1) |
| ; |
| if (newsize <= 0) { |
| PyErr_NoMemory(); |
| return -1; |
| } |
| |
| /* Get space for a new table. */ |
| oldtable = so->table; |
| assert(oldtable != NULL); |
| is_oldtable_malloced = oldtable != so->smalltable; |
| |
| if (newsize == PySet_MINSIZE) { |
| /* A large table is shrinking, or we can't get any smaller. */ |
| newtable = so->smalltable; |
| if (newtable == oldtable) { |
| if (so->fill == so->used) { |
| /* No dummies, so no point doing anything. */ |
| return 0; |
| } |
| /* We're not going to resize it, but rebuild the |
| table anyway to purge old dummy entries. |
| Subtle: This is *necessary* if fill==size, |
| as set_lookkey needs at least one virgin slot to |
| terminate failing searches. If fill < size, it's |
| merely desirable, as dummies slow searches. */ |
| assert(so->fill > so->used); |
| memcpy(small_copy, oldtable, sizeof(small_copy)); |
| oldtable = small_copy; |
| } |
| } |
| else { |
| newtable = PyMem_NEW(setentry, newsize); |
| if (newtable == NULL) { |
| PyErr_NoMemory(); |
| return -1; |
| } |
| } |
| |
| /* Make the set empty, using the new table. */ |
| assert(newtable != oldtable); |
| so->table = newtable; |
| so->mask = newsize - 1; |
| memset(newtable, 0, sizeof(setentry) * newsize); |
| i = so->used; |
| so->used = 0; |
| so->fill = 0; |
| |
| /* Copy the data over; this is refcount-neutral for active entries; |
| dummy entries aren't copied over, of course */ |
| for (entry = oldtable; i > 0; entry++) { |
| if (entry->key != NULL && entry->key != dummy) { |
| --i; |
| set_insert_clean(so, entry->key, entry->hash); |
| } |
| } |
| |
| if (is_oldtable_malloced) |
| PyMem_DEL(oldtable); |
| return 0; |
| } |
| |
| /* CAUTION: set_add_key/entry() must guarantee it won't resize the table */ |
| |
| static int |
| set_add_entry(PySetObject *so, setentry *entry) |
| { |
| Py_ssize_t n_used; |
| PyObject *key = entry->key; |
| Py_hash_t hash = entry->hash; |
| |
| assert(so->fill <= so->mask); /* at least one empty slot */ |
| n_used = so->used; |
| Py_INCREF(key); |
| if (set_insert_key(so, key, hash) == -1) { |
| Py_DECREF(key); |
| return -1; |
| } |
| if (!(so->used > n_used && so->fill*3 >= (so->mask+1)*2)) |
| return 0; |
| return set_table_resize(so, so->used>50000 ? so->used*2 : so->used*4); |
| } |
| |
| static int |
| set_add_key(PySetObject *so, PyObject *key) |
| { |
| Py_hash_t hash; |
| Py_ssize_t n_used; |
| |
| if (!PyUnicode_CheckExact(key) || |
| (hash = ((PyASCIIObject *) key)->hash) == -1) { |
| hash = PyObject_Hash(key); |
| if (hash == -1) |
| return -1; |
| } |
| assert(so->fill <= so->mask); /* at least one empty slot */ |
| n_used = so->used; |
| Py_INCREF(key); |
| if (set_insert_key(so, key, hash) == -1) { |
| Py_DECREF(key); |
| return -1; |
| } |
| if (!(so->used > n_used && so->fill*3 >= (so->mask+1)*2)) |
| return 0; |
| return set_table_resize(so, so->used>50000 ? so->used*2 : so->used*4); |
| } |
| |
| #define DISCARD_NOTFOUND 0 |
| #define DISCARD_FOUND 1 |
| |
| static int |
| set_discard_entry(PySetObject *so, setentry *oldentry) |
| { setentry *entry; |
| PyObject *old_key; |
| |
| entry = (so->lookup)(so, oldentry->key, oldentry->hash); |
| if (entry == NULL) |
| return -1; |
| if (entry->key == NULL || entry->key == dummy) |
| return DISCARD_NOTFOUND; |
| old_key = entry->key; |
| entry->key = dummy; |
| so->used--; |
| Py_DECREF(old_key); |
| return DISCARD_FOUND; |
| } |
| |
| static int |
| set_discard_key(PySetObject *so, PyObject *key) |
| { |
| Py_hash_t hash; |
| setentry *entry; |
| PyObject *old_key; |
| |
| assert (PyAnySet_Check(so)); |
| |
| if (!PyUnicode_CheckExact(key) || |
| (hash = ((PyASCIIObject *) key)->hash) == -1) { |
| hash = PyObject_Hash(key); |
| if (hash == -1) |
| return -1; |
| } |
| entry = (so->lookup)(so, key, hash); |
| if (entry == NULL) |
| return -1; |
| if (entry->key == NULL || entry->key == dummy) |
| return DISCARD_NOTFOUND; |
| old_key = entry->key; |
| entry->key = dummy; |
| so->used--; |
| Py_DECREF(old_key); |
| return DISCARD_FOUND; |
| } |
| |
| static void |
| set_empty_to_minsize(PySetObject *so) |
| { |
| memset(so->smalltable, 0, sizeof(so->smalltable)); |
| so->fill = 0; |
| so->used = 0; |
| so->mask = PySet_MINSIZE - 1; |
| so->table = so->smalltable; |
| so->hash = -1; |
| } |
| |
| static int |
| set_clear_internal(PySetObject *so) |
| { |
| setentry *entry, *table; |
| int table_is_malloced; |
| Py_ssize_t fill; |
| setentry small_copy[PySet_MINSIZE]; |
| |
| #ifdef Py_DEBUG |
| Py_ssize_t i = 0; |
| Py_ssize_t n = so->mask + 1; |
| #endif |
| |
| assert (PyAnySet_Check(so)); |
| table = so->table; |
| assert(table != NULL); |
| table_is_malloced = table != so->smalltable; |
| |
| /* This is delicate. During the process of clearing the set, |
| * decrefs can cause the set to mutate. To avoid fatal confusion |
| * (voice of experience), we have to make the set empty before |
| * clearing the slots, and never refer to anything via so->ref while |
| * clearing. |
| */ |
| fill = so->fill; |
| if (table_is_malloced) |
| set_empty_to_minsize(so); |
| |
| else if (fill > 0) { |
| /* It's a small table with something that needs to be cleared. |
| * Afraid the only safe way is to copy the set entries into |
| * another small table first. |
| */ |
| memcpy(small_copy, table, sizeof(small_copy)); |
| table = small_copy; |
| set_empty_to_minsize(so); |
| } |
| /* else it's a small table that's already empty */ |
| |
| /* Now we can finally clear things. If C had refcounts, we could |
| * assert that the refcount on table is 1 now, i.e. that this function |
| * has unique access to it, so decref side-effects can't alter it. |
| */ |
| for (entry = table; fill > 0; ++entry) { |
| #ifdef Py_DEBUG |
| assert(i < n); |
| ++i; |
| #endif |
| if (entry->key) { |
| --fill; |
| if (entry->key != dummy) |
| Py_DECREF(entry->key); |
| } |
| #ifdef Py_DEBUG |
| else |
| assert(entry->key == NULL); |
| #endif |
| } |
| |
| if (table_is_malloced) |
| PyMem_DEL(table); |
| return 0; |
| } |
| |
| /* |
| * Iterate over a set table. Use like so: |
| * |
| * Py_ssize_t pos; |
| * setentry *entry; |
| * pos = 0; # important! pos should not otherwise be changed by you |
| * while (set_next(yourset, &pos, &entry)) { |
| * Refer to borrowed reference in entry->key. |
| * } |
| * |
| * CAUTION: In general, it isn't safe to use set_next in a loop that |
| * mutates the table. |
| */ |
| static int |
| set_next(PySetObject *so, Py_ssize_t *pos_ptr, setentry **entry_ptr) |
| { |
| Py_ssize_t i; |
| Py_ssize_t mask; |
| setentry *table; |
| |
| assert (PyAnySet_Check(so)); |
| i = *pos_ptr; |
| assert(i >= 0); |
| table = so->table; |
| mask = so->mask; |
| while (i <= mask && (table[i].key == NULL || table[i].key == dummy)) |
| i++; |
| *pos_ptr = i+1; |
| if (i > mask) |
| return 0; |
| assert(table[i].key != NULL); |
| *entry_ptr = &table[i]; |
| return 1; |
| } |
| |
| static void |
| set_dealloc(PySetObject *so) |
| { |
| setentry *entry; |
| Py_ssize_t fill = so->fill; |
| PyObject_GC_UnTrack(so); |
| Py_TRASHCAN_SAFE_BEGIN(so) |
| if (so->weakreflist != NULL) |
| PyObject_ClearWeakRefs((PyObject *) so); |
| |
| for (entry = so->table; fill > 0; entry++) { |
| if (entry->key) { |
| --fill; |
| if (entry->key != dummy) |
| Py_DECREF(entry->key); |
| } |
| } |
| if (so->table != so->smalltable) |
| PyMem_DEL(so->table); |
| Py_TYPE(so)->tp_free(so); |
| Py_TRASHCAN_SAFE_END(so) |
| } |
| |
| static PyObject * |
| set_repr(PySetObject *so) |
| { |
| PyObject *result=NULL, *keys, *listrepr, *tmp; |
| int status = Py_ReprEnter((PyObject*)so); |
| |
| if (status != 0) { |
| if (status < 0) |
| return NULL; |
| return PyUnicode_FromFormat("%s(...)", Py_TYPE(so)->tp_name); |
| } |
| |
| /* shortcut for the empty set */ |
| if (!so->used) { |
| Py_ReprLeave((PyObject*)so); |
| return PyUnicode_FromFormat("%s()", Py_TYPE(so)->tp_name); |
| } |
| |
| keys = PySequence_List((PyObject *)so); |
| if (keys == NULL) |
| goto done; |
| |
| /* repr(keys)[1:-1] */ |
| listrepr = PyObject_Repr(keys); |
| Py_DECREF(keys); |
| if (listrepr == NULL) |
| goto done; |
| tmp = PyUnicode_Substring(listrepr, 1, PyUnicode_GET_LENGTH(listrepr)-1); |
| Py_DECREF(listrepr); |
| if (tmp == NULL) |
| goto done; |
| listrepr = tmp; |
| |
| if (Py_TYPE(so) != &PySet_Type) |
| result = PyUnicode_FromFormat("%s({%U})", |
| Py_TYPE(so)->tp_name, |
| listrepr); |
| else |
| result = PyUnicode_FromFormat("{%U}", listrepr); |
| Py_DECREF(listrepr); |
| done: |
| Py_ReprLeave((PyObject*)so); |
| return result; |
| } |
| |
| static Py_ssize_t |
| set_len(PyObject *so) |
| { |
| return ((PySetObject *)so)->used; |
| } |
| |
| static int |
| set_merge(PySetObject *so, PyObject *otherset) |
| { |
| PySetObject *other; |
| PyObject *key; |
| Py_hash_t hash; |
| Py_ssize_t i; |
| setentry *entry; |
| |
| assert (PyAnySet_Check(so)); |
| assert (PyAnySet_Check(otherset)); |
| |
| other = (PySetObject*)otherset; |
| if (other == so || other->used == 0) |
| /* a.update(a) or a.update({}); nothing to do */ |
| return 0; |
| /* Do one big resize at the start, rather than |
| * incrementally resizing as we insert new keys. Expect |
| * that there will be no (or few) overlapping keys. |
| */ |
| if ((so->fill + other->used)*3 >= (so->mask+1)*2) { |
| if (set_table_resize(so, (so->used + other->used)*2) != 0) |
| return -1; |
| } |
| for (i = 0; i <= other->mask; i++) { |
| entry = &other->table[i]; |
| key = entry->key; |
| hash = entry->hash; |
| if (key != NULL && |
| key != dummy) { |
| Py_INCREF(key); |
| if (set_insert_key(so, key, hash) == -1) { |
| Py_DECREF(key); |
| return -1; |
| } |
| } |
| } |
| return 0; |
| } |
| |
| static int |
| set_contains_key(PySetObject *so, PyObject *key) |
| { |
| Py_hash_t hash; |
| setentry *entry; |
| |
| if (!PyUnicode_CheckExact(key) || |
| (hash = ((PyASCIIObject *) key)->hash) == -1) { |
| hash = PyObject_Hash(key); |
| if (hash == -1) |
| return -1; |
| } |
| entry = (so->lookup)(so, key, hash); |
| if (entry == NULL) |
| return -1; |
| key = entry->key; |
| return key != NULL && key != dummy; |
| } |
| |
| static int |
| set_contains_entry(PySetObject *so, setentry *entry) |
| { |
| PyObject *key; |
| setentry *lu_entry; |
| |
| lu_entry = (so->lookup)(so, entry->key, entry->hash); |
| if (lu_entry == NULL) |
| return -1; |
| key = lu_entry->key; |
| return key != NULL && key != dummy; |
| } |
| |
| static PyObject * |
| set_pop(PySetObject *so) |
| { |
| Py_ssize_t i = 0; |
| setentry *entry; |
| PyObject *key; |
| |
| assert (PyAnySet_Check(so)); |
| if (so->used == 0) { |
| PyErr_SetString(PyExc_KeyError, "pop from an empty set"); |
| return NULL; |
| } |
| |
| /* Set entry to "the first" unused or dummy set entry. We abuse |
| * the hash field of slot 0 to hold a search finger: |
| * If slot 0 has a value, use slot 0. |
| * Else slot 0 is being used to hold a search finger, |
| * and we use its hash value as the first index to look. |
| */ |
| entry = &so->table[0]; |
| if (entry->key == NULL || entry->key == dummy) { |
| i = entry->hash; |
| /* The hash field may be a real hash value, or it may be a |
| * legit search finger, or it may be a once-legit search |
| * finger that's out of bounds now because it wrapped around |
| * or the table shrunk -- simply make sure it's in bounds now. |
| */ |
| if (i > so->mask || i < 1) |
| i = 1; /* skip slot 0 */ |
| while ((entry = &so->table[i])->key == NULL || entry->key==dummy) { |
| i++; |
| if (i > so->mask) |
| i = 1; |
| } |
| } |
| key = entry->key; |
| entry->key = dummy; |
| so->used--; |
| so->table[0].hash = i + 1; /* next place to start */ |
| return key; |
| } |
| |
| PyDoc_STRVAR(pop_doc, "Remove and return an arbitrary set element.\n\ |
| Raises KeyError if the set is empty."); |
| |
| static int |
| set_traverse(PySetObject *so, visitproc visit, void *arg) |
| { |
| Py_ssize_t pos = 0; |
| setentry *entry; |
| |
| while (set_next(so, &pos, &entry)) |
| Py_VISIT(entry->key); |
| return 0; |
| } |
| |
| static Py_hash_t |
| frozenset_hash(PyObject *self) |
| { |
| /* Most of the constants in this hash algorithm are randomly choosen |
| large primes with "interesting bit patterns" and that passed |
| tests for good collision statistics on a variety of problematic |
| datasets such as: |
| |
| ps = [] |
| for r in range(21): |
| ps += itertools.combinations(range(20), r) |
| num_distinct_hashes = len({hash(frozenset(s)) for s in ps}) |
| |
| */ |
| PySetObject *so = (PySetObject *)self; |
| Py_uhash_t h, hash = 1927868237UL; |
| setentry *entry; |
| Py_ssize_t pos = 0; |
| |
| if (so->hash != -1) |
| return so->hash; |
| |
| hash *= (Py_uhash_t)PySet_GET_SIZE(self) + 1; |
| while (set_next(so, &pos, &entry)) { |
| /* Work to increase the bit dispersion for closely spaced hash |
| values. The is important because some use cases have many |
| combinations of a small number of elements with nearby |
| hashes so that many distinct combinations collapse to only |
| a handful of distinct hash values. */ |
| h = entry->hash; |
| hash ^= ((h ^ 89869747UL) ^ (h << 16)) * 3644798167UL; |
| } |
| /* Make the final result spread-out in a different pattern |
| than the algorithm for tuples or other python objects. */ |
| hash = hash * 69069U + 907133923UL; |
| if (hash == -1) |
| hash = 590923713UL; |
| so->hash = hash; |
| return hash; |
| } |
| |
| /***** Set iterator type ***********************************************/ |
| |
| typedef struct { |
| PyObject_HEAD |
| PySetObject *si_set; /* Set to NULL when iterator is exhausted */ |
| Py_ssize_t si_used; |
| Py_ssize_t si_pos; |
| Py_ssize_t len; |
| } setiterobject; |
| |
| static void |
| setiter_dealloc(setiterobject *si) |
| { |
| Py_XDECREF(si->si_set); |
| PyObject_GC_Del(si); |
| } |
| |
| static int |
| setiter_traverse(setiterobject *si, visitproc visit, void *arg) |
| { |
| Py_VISIT(si->si_set); |
| return 0; |
| } |
| |
| static PyObject * |
| setiter_len(setiterobject *si) |
| { |
| Py_ssize_t len = 0; |
| if (si->si_set != NULL && si->si_used == si->si_set->used) |
| len = si->len; |
| return PyLong_FromSsize_t(len); |
| } |
| |
| PyDoc_STRVAR(length_hint_doc, "Private method returning an estimate of len(list(it))."); |
| |
| static PyObject *setiter_iternext(setiterobject *si); |
| |
| static PyObject * |
| setiter_reduce(setiterobject *si) |
| { |
| PyObject *list; |
| setiterobject tmp; |
| |
| list = PyList_New(0); |
| if (!list) |
| return NULL; |
| |
| /* copy the iterator state */ |
| tmp = *si; |
| Py_XINCREF(tmp.si_set); |
| |
| /* iterate the temporary into a list */ |
| for(;;) { |
| PyObject *element = setiter_iternext(&tmp); |
| if (element) { |
| if (PyList_Append(list, element)) { |
| Py_DECREF(element); |
| Py_DECREF(list); |
| Py_XDECREF(tmp.si_set); |
| return NULL; |
| } |
| Py_DECREF(element); |
| } else |
| break; |
| } |
| Py_XDECREF(tmp.si_set); |
| /* check for error */ |
| if (tmp.si_set != NULL) { |
| /* we have an error */ |
| Py_DECREF(list); |
| return NULL; |
| } |
| return Py_BuildValue("N(N)", _PyObject_GetBuiltin("iter"), list); |
| } |
| |
| PyDoc_STRVAR(reduce_doc, "Return state information for pickling."); |
| |
| static PyMethodDef setiter_methods[] = { |
| {"__length_hint__", (PyCFunction)setiter_len, METH_NOARGS, length_hint_doc}, |
| {"__reduce__", (PyCFunction)setiter_reduce, METH_NOARGS, reduce_doc}, |
| {NULL, NULL} /* sentinel */ |
| }; |
| |
| static PyObject *setiter_iternext(setiterobject *si) |
| { |
| PyObject *key; |
| Py_ssize_t i, mask; |
| setentry *entry; |
| PySetObject *so = si->si_set; |
| |
| if (so == NULL) |
| return NULL; |
| assert (PyAnySet_Check(so)); |
| |
| if (si->si_used != so->used) { |
| PyErr_SetString(PyExc_RuntimeError, |
| "Set changed size during iteration"); |
| si->si_used = -1; /* Make this state sticky */ |
| return NULL; |
| } |
| |
| i = si->si_pos; |
| assert(i>=0); |
| entry = so->table; |
| mask = so->mask; |
| while (i <= mask && (entry[i].key == NULL || entry[i].key == dummy)) |
| i++; |
| si->si_pos = i+1; |
| if (i > mask) |
| goto fail; |
| si->len--; |
| key = entry[i].key; |
| Py_INCREF(key); |
| return key; |
| |
| fail: |
| Py_DECREF(so); |
| si->si_set = NULL; |
| return NULL; |
| } |
| |
| PyTypeObject PySetIter_Type = { |
| PyVarObject_HEAD_INIT(&PyType_Type, 0) |
| "set_iterator", /* tp_name */ |
| sizeof(setiterobject), /* tp_basicsize */ |
| 0, /* tp_itemsize */ |
| /* methods */ |
| (destructor)setiter_dealloc, /* tp_dealloc */ |
| 0, /* tp_print */ |
| 0, /* tp_getattr */ |
| 0, /* tp_setattr */ |
| 0, /* tp_reserved */ |
| 0, /* tp_repr */ |
| 0, /* tp_as_number */ |
| 0, /* tp_as_sequence */ |
| 0, /* tp_as_mapping */ |
| 0, /* tp_hash */ |
| 0, /* tp_call */ |
| 0, /* tp_str */ |
| PyObject_GenericGetAttr, /* tp_getattro */ |
| 0, /* tp_setattro */ |
| 0, /* tp_as_buffer */ |
| Py_TPFLAGS_DEFAULT | Py_TPFLAGS_HAVE_GC,/* tp_flags */ |
| 0, /* tp_doc */ |
| (traverseproc)setiter_traverse, /* tp_traverse */ |
| 0, /* tp_clear */ |
| 0, /* tp_richcompare */ |
| 0, /* tp_weaklistoffset */ |
| PyObject_SelfIter, /* tp_iter */ |
| (iternextfunc)setiter_iternext, /* tp_iternext */ |
| setiter_methods, /* tp_methods */ |
| 0, |
| }; |
| |
| static PyObject * |
| set_iter(PySetObject *so) |
| { |
| setiterobject *si = PyObject_GC_New(setiterobject, &PySetIter_Type); |
| if (si == NULL) |
| return NULL; |
| Py_INCREF(so); |
| si->si_set = so; |
| si->si_used = so->used; |
| si->si_pos = 0; |
| si->len = so->used; |
| _PyObject_GC_TRACK(si); |
| return (PyObject *)si; |
| } |
| |
| static int |
| set_update_internal(PySetObject *so, PyObject *other) |
| { |
| PyObject *key, *it; |
| |
| if (PyAnySet_Check(other)) |
| return set_merge(so, other); |
| |
| if (PyDict_CheckExact(other)) { |
| PyObject *value; |
| Py_ssize_t pos = 0; |
| Py_hash_t hash; |
| Py_ssize_t dictsize = PyDict_Size(other); |
| |
| /* Do one big resize at the start, rather than |
| * incrementally resizing as we insert new keys. Expect |
| * that there will be no (or few) overlapping keys. |
| */ |
| if (dictsize == -1) |
| return -1; |
| if ((so->fill + dictsize)*3 >= (so->mask+1)*2) { |
| if (set_table_resize(so, (so->used + dictsize)*2) != 0) |
| return -1; |
| } |
| while (_PyDict_Next(other, &pos, &key, &value, &hash)) { |
| setentry an_entry; |
| |
| an_entry.hash = hash; |
| an_entry.key = key; |
| if (set_add_entry(so, &an_entry) == -1) |
| return -1; |
| } |
| return 0; |
| } |
| |
| it = PyObject_GetIter(other); |
| if (it == NULL) |
| return -1; |
| |
| while ((key = PyIter_Next(it)) != NULL) { |
| if (set_add_key(so, key) == -1) { |
| Py_DECREF(it); |
| Py_DECREF(key); |
| return -1; |
| } |
| Py_DECREF(key); |
| } |
| Py_DECREF(it); |
| if (PyErr_Occurred()) |
| return -1; |
| return 0; |
| } |
| |
| static PyObject * |
| set_update(PySetObject *so, PyObject *args) |
| { |
| Py_ssize_t i; |
| |
| for (i=0 ; i<PyTuple_GET_SIZE(args) ; i++) { |
| PyObject *other = PyTuple_GET_ITEM(args, i); |
| if (set_update_internal(so, other) == -1) |
| return NULL; |
| } |
| Py_RETURN_NONE; |
| } |
| |
| PyDoc_STRVAR(update_doc, |
| "Update a set with the union of itself and others."); |
| |
| static PyObject * |
| make_new_set(PyTypeObject *type, PyObject *iterable) |
| { |
| PySetObject *so = NULL; |
| |
| /* create PySetObject structure */ |
| so = (PySetObject *)type->tp_alloc(type, 0); |
| if (so == NULL) |
| return NULL; |
| |
| so->fill = 0; |
| so->used = 0; |
| so->mask = PySet_MINSIZE - 1; |
| so->table = so->smalltable; |
| so->lookup = set_lookkey_unicode; |
| so->hash = -1; |
| so->weakreflist = NULL; |
| |
| if (iterable != NULL) { |
| if (set_update_internal(so, iterable) == -1) { |
| Py_DECREF(so); |
| return NULL; |
| } |
| } |
| |
| return (PyObject *)so; |
| } |
| |
| static PyObject * |
| make_new_set_basetype(PyTypeObject *type, PyObject *iterable) |
| { |
| if (type != &PySet_Type && type != &PyFrozenSet_Type) { |
| if (PyType_IsSubtype(type, &PySet_Type)) |
| type = &PySet_Type; |
| else |
| type = &PyFrozenSet_Type; |
| } |
| return make_new_set(type, iterable); |
| } |
| |
| /* The empty frozenset is a singleton */ |
| static PyObject *emptyfrozenset = NULL; |
| |
| static PyObject * |
| frozenset_new(PyTypeObject *type, PyObject *args, PyObject *kwds) |
| { |
| PyObject *iterable = NULL, *result; |
| |
| if (type == &PyFrozenSet_Type && !_PyArg_NoKeywords("frozenset()", kwds)) |
| return NULL; |
| |
| if (!PyArg_UnpackTuple(args, type->tp_name, 0, 1, &iterable)) |
| return NULL; |
| |
| if (type != &PyFrozenSet_Type) |
| return make_new_set(type, iterable); |
| |
| if (iterable != NULL) { |
| /* frozenset(f) is idempotent */ |
| if (PyFrozenSet_CheckExact(iterable)) { |
| Py_INCREF(iterable); |
| return iterable; |
| } |
| result = make_new_set(type, iterable); |
| if (result == NULL || PySet_GET_SIZE(result)) |
| return result; |
| Py_DECREF(result); |
| } |
| /* The empty frozenset is a singleton */ |
| if (emptyfrozenset == NULL) |
| emptyfrozenset = make_new_set(type, NULL); |
| Py_XINCREF(emptyfrozenset); |
| return emptyfrozenset; |
| } |
| |
| int |
| PySet_ClearFreeList(void) |
| { |
| return 0; |
| } |
| |
| void |
| PySet_Fini(void) |
| { |
| Py_CLEAR(emptyfrozenset); |
| } |
| |
| static PyObject * |
| set_new(PyTypeObject *type, PyObject *args, PyObject *kwds) |
| { |
| if (type == &PySet_Type && !_PyArg_NoKeywords("set()", kwds)) |
| return NULL; |
| |
| return make_new_set(type, NULL); |
| } |
| |
| /* set_swap_bodies() switches the contents of any two sets by moving their |
| internal data pointers and, if needed, copying the internal smalltables. |
| Semantically equivalent to: |
| |
| t=set(a); a.clear(); a.update(b); b.clear(); b.update(t); del t |
| |
| The function always succeeds and it leaves both objects in a stable state. |
| Useful for creating temporary frozensets from sets for membership testing |
| in __contains__(), discard(), and remove(). Also useful for operations |
| that update in-place (by allowing an intermediate result to be swapped |
| into one of the original inputs). |
| */ |
| |
| static void |
| set_swap_bodies(PySetObject *a, PySetObject *b) |
| { |
| Py_ssize_t t; |
| setentry *u; |
| setentry *(*f)(PySetObject *so, PyObject *key, Py_ssize_t hash); |
| setentry tab[PySet_MINSIZE]; |
| Py_hash_t h; |
| |
| t = a->fill; a->fill = b->fill; b->fill = t; |
| t = a->used; a->used = b->used; b->used = t; |
| t = a->mask; a->mask = b->mask; b->mask = t; |
| |
| u = a->table; |
| if (a->table == a->smalltable) |
| u = b->smalltable; |
| a->table = b->table; |
| if (b->table == b->smalltable) |
| a->table = a->smalltable; |
| b->table = u; |
| |
| f = a->lookup; a->lookup = b->lookup; b->lookup = f; |
| |
| if (a->table == a->smalltable || b->table == b->smalltable) { |
| memcpy(tab, a->smalltable, sizeof(tab)); |
| memcpy(a->smalltable, b->smalltable, sizeof(tab)); |
| memcpy(b->smalltable, tab, sizeof(tab)); |
| } |
| |
| if (PyType_IsSubtype(Py_TYPE(a), &PyFrozenSet_Type) && |
| PyType_IsSubtype(Py_TYPE(b), &PyFrozenSet_Type)) { |
| h = a->hash; a->hash = b->hash; b->hash = h; |
| } else { |
| a->hash = -1; |
| b->hash = -1; |
| } |
| } |
| |
| static PyObject * |
| set_copy(PySetObject *so) |
| { |
| return make_new_set_basetype(Py_TYPE(so), (PyObject *)so); |
| } |
| |
| static PyObject * |
| frozenset_copy(PySetObject *so) |
| { |
| if (PyFrozenSet_CheckExact(so)) { |
| Py_INCREF(so); |
| return (PyObject *)so; |
| } |
| return set_copy(so); |
| } |
| |
| PyDoc_STRVAR(copy_doc, "Return a shallow copy of a set."); |
| |
| static PyObject * |
| set_clear(PySetObject *so) |
| { |
| set_clear_internal(so); |
| Py_RETURN_NONE; |
| } |
| |
| PyDoc_STRVAR(clear_doc, "Remove all elements from this set."); |
| |
| static PyObject * |
| set_union(PySetObject *so, PyObject *args) |
| { |
| PySetObject *result; |
| PyObject *other; |
| Py_ssize_t i; |
| |
| result = (PySetObject *)set_copy(so); |
| if (result == NULL) |
| return NULL; |
| |
| for (i=0 ; i<PyTuple_GET_SIZE(args) ; i++) { |
| other = PyTuple_GET_ITEM(args, i); |
| if ((PyObject *)so == other) |
| continue; |
| if (set_update_internal(result, other) == -1) { |
| Py_DECREF(result); |
| return NULL; |
| } |
| } |
| return (PyObject *)result; |
| } |
| |
| PyDoc_STRVAR(union_doc, |
| "Return the union of sets as a new set.\n\ |
| \n\ |
| (i.e. all elements that are in either set.)"); |
| |
| static PyObject * |
| set_or(PySetObject *so, PyObject *other) |
| { |
| PySetObject *result; |
| |
| if (!PyAnySet_Check(so) || !PyAnySet_Check(other)) |
| Py_RETURN_NOTIMPLEMENTED; |
| |
| result = (PySetObject *)set_copy(so); |
| if (result == NULL) |
| return NULL; |
| if ((PyObject *)so == other) |
| return (PyObject *)result; |
| if (set_update_internal(result, other) == -1) { |
| Py_DECREF(result); |
| return NULL; |
| } |
| return (PyObject *)result; |
| } |
| |
| static PyObject * |
| set_ior(PySetObject *so, PyObject *other) |
| { |
| if (!PyAnySet_Check(other)) |
| Py_RETURN_NOTIMPLEMENTED; |
| |
| if (set_update_internal(so, other) == -1) |
| return NULL; |
| Py_INCREF(so); |
| return (PyObject *)so; |
| } |
| |
| static PyObject * |
| set_intersection(PySetObject *so, PyObject *other) |
| { |
| PySetObject *result; |
| PyObject *key, *it, *tmp; |
| |
| if ((PyObject *)so == other) |
| return set_copy(so); |
| |
| result = (PySetObject *)make_new_set_basetype(Py_TYPE(so), NULL); |
| if (result == NULL) |
| return NULL; |
| |
| if (PyAnySet_Check(other)) { |
| Py_ssize_t pos = 0; |
| setentry *entry; |
| |
| if (PySet_GET_SIZE(other) > PySet_GET_SIZE(so)) { |
| tmp = (PyObject *)so; |
| so = (PySetObject *)other; |
| other = tmp; |
| } |
| |
| while (set_next((PySetObject *)other, &pos, &entry)) { |
| int rv = set_contains_entry(so, entry); |
| if (rv == -1) { |
| Py_DECREF(result); |
| return NULL; |
| } |
| if (rv) { |
| if (set_add_entry(result, entry) == -1) { |
| Py_DECREF(result); |
| return NULL; |
| } |
| } |
| } |
| return (PyObject *)result; |
| } |
| |
| it = PyObject_GetIter(other); |
| if (it == NULL) { |
| Py_DECREF(result); |
| return NULL; |
| } |
| |
| while ((key = PyIter_Next(it)) != NULL) { |
| int rv; |
| setentry entry; |
| Py_hash_t hash = PyObject_Hash(key); |
| |
| if (hash == -1) { |
| Py_DECREF(it); |
| Py_DECREF(result); |
| Py_DECREF(key); |
| return NULL; |
| } |
| entry.hash = hash; |
| entry.key = key; |
| rv = set_contains_entry(so, &entry); |
| if (rv == -1) { |
| Py_DECREF(it); |
| Py_DECREF(result); |
| Py_DECREF(key); |
| return NULL; |
| } |
| if (rv) { |
| if (set_add_entry(result, &entry) == -1) { |
| Py_DECREF(it); |
| Py_DECREF(result); |
| Py_DECREF(key); |
| return NULL; |
| } |
| } |
| Py_DECREF(key); |
| } |
| Py_DECREF(it); |
| if (PyErr_Occurred()) { |
| Py_DECREF(result); |
| return NULL; |
| } |
| return (PyObject *)result; |
| } |
| |
| static PyObject * |
| set_intersection_multi(PySetObject *so, PyObject *args) |
| { |
| Py_ssize_t i; |
| PyObject *result = (PyObject *)so; |
| |
| if (PyTuple_GET_SIZE(args) == 0) |
| return set_copy(so); |
| |
| Py_INCREF(so); |
| for (i=0 ; i<PyTuple_GET_SIZE(args) ; i++) { |
| PyObject *other = PyTuple_GET_ITEM(args, i); |
| PyObject *newresult = set_intersection((PySetObject *)result, other); |
| if (newresult == NULL) { |
| Py_DECREF(result); |
| return NULL; |
| } |
| Py_DECREF(result); |
| result = newresult; |
| } |
| return result; |
| } |
| |
| PyDoc_STRVAR(intersection_doc, |
| "Return the intersection of two sets as a new set.\n\ |
| \n\ |
| (i.e. all elements that are in both sets.)"); |
| |
| static PyObject * |
| set_intersection_update(PySetObject *so, PyObject *other) |
| { |
| PyObject *tmp; |
| |
| tmp = set_intersection(so, other); |
| if (tmp == NULL) |
| return NULL; |
| set_swap_bodies(so, (PySetObject *)tmp); |
| Py_DECREF(tmp); |
| Py_RETURN_NONE; |
| } |
| |
| static PyObject * |
| set_intersection_update_multi(PySetObject *so, PyObject *args) |
| { |
| PyObject *tmp; |
| |
| tmp = set_intersection_multi(so, args); |
| if (tmp == NULL) |
| return NULL; |
| set_swap_bodies(so, (PySetObject *)tmp); |
| Py_DECREF(tmp); |
| Py_RETURN_NONE; |
| } |
| |
| PyDoc_STRVAR(intersection_update_doc, |
| "Update a set with the intersection of itself and another."); |
| |
| static PyObject * |
| set_and(PySetObject *so, PyObject *other) |
| { |
| if (!PyAnySet_Check(so) || !PyAnySet_Check(other)) |
| Py_RETURN_NOTIMPLEMENTED; |
| return set_intersection(so, other); |
| } |
| |
| static PyObject * |
| set_iand(PySetObject *so, PyObject *other) |
| { |
| PyObject *result; |
| |
| if (!PyAnySet_Check(other)) |
| Py_RETURN_NOTIMPLEMENTED; |
| result = set_intersection_update(so, other); |
| if (result == NULL) |
| return NULL; |
| Py_DECREF(result); |
| Py_INCREF(so); |
| return (PyObject *)so; |
| } |
| |
| static PyObject * |
| set_isdisjoint(PySetObject *so, PyObject *other) |
| { |
| PyObject *key, *it, *tmp; |
| |
| if ((PyObject *)so == other) { |
| if (PySet_GET_SIZE(so) == 0) |
| Py_RETURN_TRUE; |
| else |
| Py_RETURN_FALSE; |
| } |
| |
| if (PyAnySet_CheckExact(other)) { |
| Py_ssize_t pos = 0; |
| setentry *entry; |
| |
| if (PySet_GET_SIZE(other) > PySet_GET_SIZE(so)) { |
| tmp = (PyObject *)so; |
| so = (PySetObject *)other; |
| other = tmp; |
| } |
| while (set_next((PySetObject *)other, &pos, &entry)) { |
| int rv = set_contains_entry(so, entry); |
| if (rv == -1) |
| return NULL; |
| if (rv) |
| Py_RETURN_FALSE; |
| } |
| Py_RETURN_TRUE; |
| } |
| |
| it = PyObject_GetIter(other); |
| if (it == NULL) |
| return NULL; |
| |
| while ((key = PyIter_Next(it)) != NULL) { |
| int rv; |
| setentry entry; |
| Py_hash_t hash = PyObject_Hash(key); |
| |
| if (hash == -1) { |
| Py_DECREF(key); |
| Py_DECREF(it); |
| return NULL; |
| } |
| entry.hash = hash; |
| entry.key = key; |
| rv = set_contains_entry(so, &entry); |
| Py_DECREF(key); |
| if (rv == -1) { |
| Py_DECREF(it); |
| return NULL; |
| } |
| if (rv) { |
| Py_DECREF(it); |
| Py_RETURN_FALSE; |
| } |
| } |
| Py_DECREF(it); |
| if (PyErr_Occurred()) |
| return NULL; |
| Py_RETURN_TRUE; |
| } |
| |
| PyDoc_STRVAR(isdisjoint_doc, |
| "Return True if two sets have a null intersection."); |
| |
| static int |
| set_difference_update_internal(PySetObject *so, PyObject *other) |
| { |
| if ((PyObject *)so == other) |
| return set_clear_internal(so); |
| |
| if (PyAnySet_Check(other)) { |
| setentry *entry; |
| Py_ssize_t pos = 0; |
| |
| while (set_next((PySetObject *)other, &pos, &entry)) |
| if (set_discard_entry(so, entry) == -1) |
| return -1; |
| } else { |
| PyObject *key, *it; |
| it = PyObject_GetIter(other); |
| if (it == NULL) |
| return -1; |
| |
| while ((key = PyIter_Next(it)) != NULL) { |
| if (set_discard_key(so, key) == -1) { |
| Py_DECREF(it); |
| Py_DECREF(key); |
| return -1; |
| } |
| Py_DECREF(key); |
| } |
| Py_DECREF(it); |
| if (PyErr_Occurred()) |
| return -1; |
| } |
| /* If more than 1/5 are dummies, then resize them away. */ |
| if ((so->fill - so->used) * 5 < so->mask) |
| return 0; |
| return set_table_resize(so, so->used>50000 ? so->used*2 : so->used*4); |
| } |
| |
| static PyObject * |
| set_difference_update(PySetObject *so, PyObject *args) |
| { |
| Py_ssize_t i; |
| |
| for (i=0 ; i<PyTuple_GET_SIZE(args) ; i++) { |
| PyObject *other = PyTuple_GET_ITEM(args, i); |
| if (set_difference_update_internal(so, other) == -1) |
| return NULL; |
| } |
| Py_RETURN_NONE; |
| } |
| |
| PyDoc_STRVAR(difference_update_doc, |
| "Remove all elements of another set from this set."); |
| |
| static PyObject * |
| set_copy_and_difference(PySetObject *so, PyObject *other) |
| { |
| PyObject *result; |
| |
| result = set_copy(so); |
| if (result == NULL) |
| return NULL; |
| if (set_difference_update_internal((PySetObject *) result, other) != -1) |
| return result; |
| Py_DECREF(result); |
| return NULL; |
| } |
| |
| static PyObject * |
| set_difference(PySetObject *so, PyObject *other) |
| { |
| PyObject *result; |
| setentry *entry; |
| Py_ssize_t pos = 0; |
| |
| if (!PyAnySet_Check(other) && !PyDict_CheckExact(other)) { |
| return set_copy_and_difference(so, other); |
| } |
| |
| /* If len(so) much more than len(other), it's more efficient to simply copy |
| * so and then iterate other looking for common elements. */ |
| if ((PySet_GET_SIZE(so) >> 2) > PyObject_Size(other)) { |
| return set_copy_and_difference(so, other); |
| } |
| |
| result = make_new_set_basetype(Py_TYPE(so), NULL); |
| if (result == NULL) |
| return NULL; |
| |
| if (PyDict_CheckExact(other)) { |
| while (set_next(so, &pos, &entry)) { |
| setentry entrycopy; |
| entrycopy.hash = entry->hash; |
| entrycopy.key = entry->key; |
| if (!_PyDict_Contains(other, entry->key, entry->hash)) { |
| if (set_add_entry((PySetObject *)result, &entrycopy) == -1) { |
| Py_DECREF(result); |
| return NULL; |
| } |
| } |
| } |
| return result; |
| } |
| |
| /* Iterate over so, checking for common elements in other. */ |
| while (set_next(so, &pos, &entry)) { |
| int rv = set_contains_entry((PySetObject *)other, entry); |
| if (rv == -1) { |
| Py_DECREF(result); |
| return NULL; |
| } |
| if (!rv) { |
| if (set_add_entry((PySetObject *)result, entry) == -1) { |
| Py_DECREF(result); |
| return NULL; |
| } |
| } |
| } |
| return result; |
| } |
| |
| static PyObject * |
| set_difference_multi(PySetObject *so, PyObject *args) |
| { |
| Py_ssize_t i; |
| PyObject *result, *other; |
| |
| if (PyTuple_GET_SIZE(args) == 0) |
| return set_copy(so); |
| |
| other = PyTuple_GET_ITEM(args, 0); |
| result = set_difference(so, other); |
| if (result == NULL) |
| return NULL; |
| |
| for (i=1 ; i<PyTuple_GET_SIZE(args) ; i++) { |
| other = PyTuple_GET_ITEM(args, i); |
| if (set_difference_update_internal((PySetObject *)result, other) == -1) { |
| Py_DECREF(result); |
| return NULL; |
| } |
| } |
| return result; |
| } |
| |
| PyDoc_STRVAR(difference_doc, |
| "Return the difference of two or more sets as a new set.\n\ |
| \n\ |
| (i.e. all elements that are in this set but not the others.)"); |
| static PyObject * |
| set_sub(PySetObject *so, PyObject *other) |
| { |
| if (!PyAnySet_Check(so) || !PyAnySet_Check(other)) |
| Py_RETURN_NOTIMPLEMENTED; |
| return set_difference(so, other); |
| } |
| |
| static PyObject * |
| set_isub(PySetObject *so, PyObject *other) |
| { |
| if (!PyAnySet_Check(other)) |
| Py_RETURN_NOTIMPLEMENTED; |
| if (set_difference_update_internal(so, other) == -1) |
| return NULL; |
| Py_INCREF(so); |
| return (PyObject *)so; |
| } |
| |
| static PyObject * |
| set_symmetric_difference_update(PySetObject *so, PyObject *other) |
| { |
| PySetObject *otherset; |
| PyObject *key; |
| Py_ssize_t pos = 0; |
| setentry *entry; |
| |
| if ((PyObject *)so == other) |
| return set_clear(so); |
| |
| if (PyDict_CheckExact(other)) { |
| PyObject *value; |
| int rv; |
| Py_hash_t hash; |
| while (_PyDict_Next(other, &pos, &key, &value, &hash)) { |
| setentry an_entry; |
| |
| Py_INCREF(key); |
| an_entry.hash = hash; |
| an_entry.key = key; |
| |
| rv = set_discard_entry(so, &an_entry); |
| if (rv == -1) { |
| Py_DECREF(key); |
| return NULL; |
| } |
| if (rv == DISCARD_NOTFOUND) { |
| if (set_add_entry(so, &an_entry) == -1) { |
| Py_DECREF(key); |
| return NULL; |
| } |
| } |
| Py_DECREF(key); |
| } |
| Py_RETURN_NONE; |
| } |
| |
| if (PyAnySet_Check(other)) { |
| Py_INCREF(other); |
| otherset = (PySetObject *)other; |
| } else { |
| otherset = (PySetObject *)make_new_set_basetype(Py_TYPE(so), other); |
| if (otherset == NULL) |
| return NULL; |
| } |
| |
| while (set_next(otherset, &pos, &entry)) { |
| int rv = set_discard_entry(so, entry); |
| if (rv == -1) { |
| Py_DECREF(otherset); |
| return NULL; |
| } |
| if (rv == DISCARD_NOTFOUND) { |
| if (set_add_entry(so, entry) == -1) { |
| Py_DECREF(otherset); |
| return NULL; |
| } |
| } |
| } |
| Py_DECREF(otherset); |
| Py_RETURN_NONE; |
| } |
| |
| PyDoc_STRVAR(symmetric_difference_update_doc, |
| "Update a set with the symmetric difference of itself and another."); |
| |
| static PyObject * |
| set_symmetric_difference(PySetObject *so, PyObject *other) |
| { |
| PyObject *rv; |
| PySetObject *otherset; |
| |
| otherset = (PySetObject *)make_new_set_basetype(Py_TYPE(so), other); |
| if (otherset == NULL) |
| return NULL; |
| rv = set_symmetric_difference_update(otherset, (PyObject *)so); |
| if (rv == NULL) |
| return NULL; |
| Py_DECREF(rv); |
| return (PyObject *)otherset; |
| } |
| |
| PyDoc_STRVAR(symmetric_difference_doc, |
| "Return the symmetric difference of two sets as a new set.\n\ |
| \n\ |
| (i.e. all elements that are in exactly one of the sets.)"); |
| |
| static PyObject * |
| set_xor(PySetObject *so, PyObject *other) |
| { |
| if (!PyAnySet_Check(so) || !PyAnySet_Check(other)) |
| Py_RETURN_NOTIMPLEMENTED; |
| return set_symmetric_difference(so, other); |
| } |
| |
| static PyObject * |
| set_ixor(PySetObject *so, PyObject *other) |
| { |
| PyObject *result; |
| |
| if (!PyAnySet_Check(other)) |
| Py_RETURN_NOTIMPLEMENTED; |
| result = set_symmetric_difference_update(so, other); |
| if (result == NULL) |
| return NULL; |
| Py_DECREF(result); |
| Py_INCREF(so); |
| return (PyObject *)so; |
| } |
| |
| static PyObject * |
| set_issubset(PySetObject *so, PyObject *other) |
| { |
| setentry *entry; |
| Py_ssize_t pos = 0; |
| |
| if (!PyAnySet_Check(other)) { |
| PyObject *tmp, *result; |
| tmp = make_new_set(&PySet_Type, other); |
| if (tmp == NULL) |
| return NULL; |
| result = set_issubset(so, tmp); |
| Py_DECREF(tmp); |
| return result; |
| } |
| if (PySet_GET_SIZE(so) > PySet_GET_SIZE(other)) |
| Py_RETURN_FALSE; |
| |
| while (set_next(so, &pos, &entry)) { |
| int rv = set_contains_entry((PySetObject *)other, entry); |
| if (rv == -1) |
| return NULL; |
| if (!rv) |
| Py_RETURN_FALSE; |
| } |
| Py_RETURN_TRUE; |
| } |
| |
| PyDoc_STRVAR(issubset_doc, "Report whether another set contains this set."); |
| |
| static PyObject * |
| set_issuperset(PySetObject *so, PyObject *other) |
| { |
| PyObject *tmp, *result; |
| |
| if (!PyAnySet_Check(other)) { |
| tmp = make_new_set(&PySet_Type, other); |
| if (tmp == NULL) |
| return NULL; |
| result = set_issuperset(so, tmp); |
| Py_DECREF(tmp); |
| return result; |
| } |
| return set_issubset((PySetObject *)other, (PyObject *)so); |
| } |
| |
| PyDoc_STRVAR(issuperset_doc, "Report whether this set contains another set."); |
| |
| static PyObject * |
| set_richcompare(PySetObject *v, PyObject *w, int op) |
| { |
| PyObject *r1, *r2; |
| |
| if(!PyAnySet_Check(w)) |
| Py_RETURN_NOTIMPLEMENTED; |
| |
| switch (op) { |
| case Py_EQ: |
| if (PySet_GET_SIZE(v) != PySet_GET_SIZE(w)) |
| Py_RETURN_FALSE; |
| if (v->hash != -1 && |
| ((PySetObject *)w)->hash != -1 && |
| v->hash != ((PySetObject *)w)->hash) |
| Py_RETURN_FALSE; |
| return set_issubset(v, w); |
| case Py_NE: |
| r1 = set_richcompare(v, w, Py_EQ); |
| if (r1 == NULL) |
| return NULL; |
| r2 = PyBool_FromLong(PyObject_Not(r1)); |
| Py_DECREF(r1); |
| return r2; |
| case Py_LE: |
| return set_issubset(v, w); |
| case Py_GE: |
| return set_issuperset(v, w); |
| case Py_LT: |
| if (PySet_GET_SIZE(v) >= PySet_GET_SIZE(w)) |
| Py_RETURN_FALSE; |
| return set_issubset(v, w); |
| case Py_GT: |
| if (PySet_GET_SIZE(v) <= PySet_GET_SIZE(w)) |
| Py_RETURN_FALSE; |
| return set_issuperset(v, w); |
| } |
| Py_RETURN_NOTIMPLEMENTED; |
| } |
| |
| static PyObject * |
| set_add(PySetObject *so, PyObject *key) |
| { |
| if (set_add_key(so, key) == -1) |
| return NULL; |
| Py_RETURN_NONE; |
| } |
| |
| PyDoc_STRVAR(add_doc, |
| "Add an element to a set.\n\ |
| \n\ |
| This has no effect if the element is already present."); |
| |
| static int |
| set_contains(PySetObject *so, PyObject *key) |
| { |
| PyObject *tmpkey; |
| int rv; |
| |
| rv = set_contains_key(so, key); |
| if (rv == -1) { |
| if (!PySet_Check(key) || !PyErr_ExceptionMatches(PyExc_TypeError)) |
| return -1; |
| PyErr_Clear(); |
| tmpkey = make_new_set(&PyFrozenSet_Type, key); |
| if (tmpkey == NULL) |
| return -1; |
| rv = set_contains_key(so, tmpkey); |
| Py_DECREF(tmpkey); |
| } |
| return rv; |
| } |
| |
| static PyObject * |
| set_direct_contains(PySetObject *so, PyObject *key) |
| { |
| long result; |
| |
| result = set_contains(so, key); |
| if (result == -1) |
| return NULL; |
| return PyBool_FromLong(result); |
| } |
| |
| PyDoc_STRVAR(contains_doc, "x.__contains__(y) <==> y in x."); |
| |
| static PyObject * |
| set_remove(PySetObject *so, PyObject *key) |
| { |
| PyObject *tmpkey; |
| int rv; |
| |
| rv = set_discard_key(so, key); |
| if (rv == -1) { |
| if (!PySet_Check(key) || !PyErr_ExceptionMatches(PyExc_TypeError)) |
| return NULL; |
| PyErr_Clear(); |
| tmpkey = make_new_set(&PyFrozenSet_Type, key); |
| if (tmpkey == NULL) |
| return NULL; |
| rv = set_discard_key(so, tmpkey); |
| Py_DECREF(tmpkey); |
| if (rv == -1) |
| return NULL; |
| } |
| |
| if (rv == DISCARD_NOTFOUND) { |
| _PyErr_SetKeyError(key); |
| return NULL; |
| } |
| Py_RETURN_NONE; |
| } |
| |
| PyDoc_STRVAR(remove_doc, |
| "Remove an element from a set; it must be a member.\n\ |
| \n\ |
| If the element is not a member, raise a KeyError."); |
| |
| static PyObject * |
| set_discard(PySetObject *so, PyObject *key) |
| { |
| PyObject *tmpkey; |
| int rv; |
| |
| rv = set_discard_key(so, key); |
| if (rv == -1) { |
| if (!PySet_Check(key) || !PyErr_ExceptionMatches(PyExc_TypeError)) |
| return NULL; |
| PyErr_Clear(); |
| tmpkey = make_new_set(&PyFrozenSet_Type, key); |
| if (tmpkey == NULL) |
| return NULL; |
| rv = set_discard_key(so, tmpkey); |
| Py_DECREF(tmpkey); |
| if (rv == -1) |
| return NULL; |
| } |
| Py_RETURN_NONE; |
| } |
| |
| PyDoc_STRVAR(discard_doc, |
| "Remove an element from a set if it is a member.\n\ |
| \n\ |
| If the element is not a member, do nothing."); |
| |
| static PyObject * |
| set_reduce(PySetObject *so) |
| { |
| PyObject *keys=NULL, *args=NULL, *result=NULL, *dict=NULL; |
| _Py_IDENTIFIER(__dict__); |
| |
| keys = PySequence_List((PyObject *)so); |
| if (keys == NULL) |
| goto done; |
| args = PyTuple_Pack(1, keys); |
| if (args == NULL) |
| goto done; |
| dict = _PyObject_GetAttrId((PyObject *)so, &PyId___dict__); |
| if (dict == NULL) { |
| PyErr_Clear(); |
| dict = Py_None; |
| Py_INCREF(dict); |
| } |
| result = PyTuple_Pack(3, Py_TYPE(so), args, dict); |
| done: |
| Py_XDECREF(args); |
| Py_XDECREF(keys); |
| Py_XDECREF(dict); |
| return result; |
| } |
| |
| static PyObject * |
| set_sizeof(PySetObject *so) |
| { |
| Py_ssize_t res; |
| |
| res = sizeof(PySetObject); |
| if (so->table != so->smalltable) |
| res = res + (so->mask + 1) * sizeof(setentry); |
| return PyLong_FromSsize_t(res); |
| } |
| |
| PyDoc_STRVAR(sizeof_doc, "S.__sizeof__() -> size of S in memory, in bytes"); |
| static int |
| set_init(PySetObject *self, PyObject *args, PyObject *kwds) |
| { |
| PyObject *iterable = NULL; |
| |
| if (!PyAnySet_Check(self)) |
| return -1; |
| if (PySet_Check(self) && !_PyArg_NoKeywords("set()", kwds)) |
| return -1; |
| if (!PyArg_UnpackTuple(args, Py_TYPE(self)->tp_name, 0, 1, &iterable)) |
| return -1; |
| set_clear_internal(self); |
| self->hash = -1; |
| if (iterable == NULL) |
| return 0; |
| return set_update_internal(self, iterable); |
| } |
| |
| static PySequenceMethods set_as_sequence = { |
| set_len, /* sq_length */ |
| 0, /* sq_concat */ |
| 0, /* sq_repeat */ |
| 0, /* sq_item */ |
| 0, /* sq_slice */ |
| 0, /* sq_ass_item */ |
| 0, /* sq_ass_slice */ |
| (objobjproc)set_contains, /* sq_contains */ |
| }; |
| |
| /* set object ********************************************************/ |
| |
| #ifdef Py_DEBUG |
| static PyObject *test_c_api(PySetObject *so); |
| |
| PyDoc_STRVAR(test_c_api_doc, "Exercises C API. Returns True.\n\ |
| All is well if assertions don't fail."); |
| #endif |
| |
| static PyMethodDef set_methods[] = { |
| {"add", (PyCFunction)set_add, METH_O, |
| add_doc}, |
| {"clear", (PyCFunction)set_clear, METH_NOARGS, |
| clear_doc}, |
| {"__contains__",(PyCFunction)set_direct_contains, METH_O | METH_COEXIST, |
| contains_doc}, |
| {"copy", (PyCFunction)set_copy, METH_NOARGS, |
| copy_doc}, |
| {"discard", (PyCFunction)set_discard, METH_O, |
| discard_doc}, |
| {"difference", (PyCFunction)set_difference_multi, METH_VARARGS, |
| difference_doc}, |
| {"difference_update", (PyCFunction)set_difference_update, METH_VARARGS, |
| difference_update_doc}, |
| {"intersection",(PyCFunction)set_intersection_multi, METH_VARARGS, |
| intersection_doc}, |
| {"intersection_update",(PyCFunction)set_intersection_update_multi, METH_VARARGS, |
| intersection_update_doc}, |
| {"isdisjoint", (PyCFunction)set_isdisjoint, METH_O, |
| isdisjoint_doc}, |
| {"issubset", (PyCFunction)set_issubset, METH_O, |
| issubset_doc}, |
| {"issuperset", (PyCFunction)set_issuperset, METH_O, |
| issuperset_doc}, |
| {"pop", (PyCFunction)set_pop, METH_NOARGS, |
| pop_doc}, |
| {"__reduce__", (PyCFunction)set_reduce, METH_NOARGS, |
| reduce_doc}, |
| {"remove", (PyCFunction)set_remove, METH_O, |
| remove_doc}, |
| {"__sizeof__", (PyCFunction)set_sizeof, METH_NOARGS, |
| sizeof_doc}, |
| {"symmetric_difference",(PyCFunction)set_symmetric_difference, METH_O, |
| symmetric_difference_doc}, |
| {"symmetric_difference_update",(PyCFunction)set_symmetric_difference_update, METH_O, |
| symmetric_difference_update_doc}, |
| #ifdef Py_DEBUG |
| {"test_c_api", (PyCFunction)test_c_api, METH_NOARGS, |
| test_c_api_doc}, |
| #endif |
| {"union", (PyCFunction)set_union, METH_VARARGS, |
| union_doc}, |
| {"update", (PyCFunction)set_update, METH_VARARGS, |
| update_doc}, |
| {NULL, NULL} /* sentinel */ |
| }; |
| |
| static PyNumberMethods set_as_number = { |
| 0, /*nb_add*/ |
| (binaryfunc)set_sub, /*nb_subtract*/ |
| 0, /*nb_multiply*/ |
| 0, /*nb_remainder*/ |
| 0, /*nb_divmod*/ |
| 0, /*nb_power*/ |
| 0, /*nb_negative*/ |
| 0, /*nb_positive*/ |
| 0, /*nb_absolute*/ |
| 0, /*nb_bool*/ |
| 0, /*nb_invert*/ |
| 0, /*nb_lshift*/ |
| 0, /*nb_rshift*/ |
| (binaryfunc)set_and, /*nb_and*/ |
| (binaryfunc)set_xor, /*nb_xor*/ |
| (binaryfunc)set_or, /*nb_or*/ |
| 0, /*nb_int*/ |
| 0, /*nb_reserved*/ |
| 0, /*nb_float*/ |
| 0, /*nb_inplace_add*/ |
| (binaryfunc)set_isub, /*nb_inplace_subtract*/ |
| 0, /*nb_inplace_multiply*/ |
| 0, /*nb_inplace_remainder*/ |
| 0, /*nb_inplace_power*/ |
| 0, /*nb_inplace_lshift*/ |
| 0, /*nb_inplace_rshift*/ |
| (binaryfunc)set_iand, /*nb_inplace_and*/ |
| (binaryfunc)set_ixor, /*nb_inplace_xor*/ |
| (binaryfunc)set_ior, /*nb_inplace_or*/ |
| }; |
| |
| PyDoc_STRVAR(set_doc, |
| "set() -> new empty set object\n\ |
| set(iterable) -> new set object\n\ |
| \n\ |
| Build an unordered collection of unique elements."); |
| |
| PyTypeObject PySet_Type = { |
| PyVarObject_HEAD_INIT(&PyType_Type, 0) |
| "set", /* tp_name */ |
| sizeof(PySetObject), /* tp_basicsize */ |
| 0, /* tp_itemsize */ |
| /* methods */ |
| (destructor)set_dealloc, /* tp_dealloc */ |
| 0, /* tp_print */ |
| 0, /* tp_getattr */ |
| 0, /* tp_setattr */ |
| 0, /* tp_reserved */ |
| (reprfunc)set_repr, /* tp_repr */ |
| &set_as_number, /* tp_as_number */ |
| &set_as_sequence, /* tp_as_sequence */ |
| 0, /* tp_as_mapping */ |
| PyObject_HashNotImplemented, /* tp_hash */ |
| 0, /* tp_call */ |
| 0, /* tp_str */ |
| PyObject_GenericGetAttr, /* tp_getattro */ |
| 0, /* tp_setattro */ |
| 0, /* tp_as_buffer */ |
| Py_TPFLAGS_DEFAULT | Py_TPFLAGS_HAVE_GC | |
| Py_TPFLAGS_BASETYPE, /* tp_flags */ |
| set_doc, /* tp_doc */ |
| (traverseproc)set_traverse, /* tp_traverse */ |
| (inquiry)set_clear_internal, /* tp_clear */ |
| (richcmpfunc)set_richcompare, /* tp_richcompare */ |
| offsetof(PySetObject, weakreflist), /* tp_weaklistoffset */ |
| (getiterfunc)set_iter, /* tp_iter */ |
| 0, /* tp_iternext */ |
| set_methods, /* tp_methods */ |
| 0, /* tp_members */ |
| 0, /* tp_getset */ |
| 0, /* tp_base */ |
| 0, /* tp_dict */ |
| 0, /* tp_descr_get */ |
| 0, /* tp_descr_set */ |
| 0, /* tp_dictoffset */ |
| (initproc)set_init, /* tp_init */ |
| PyType_GenericAlloc, /* tp_alloc */ |
| set_new, /* tp_new */ |
| PyObject_GC_Del, /* tp_free */ |
| }; |
| |
| /* frozenset object ********************************************************/ |
| |
| |
| static PyMethodDef frozenset_methods[] = { |
| {"__contains__",(PyCFunction)set_direct_contains, METH_O | METH_COEXIST, |
| contains_doc}, |
| {"copy", (PyCFunction)frozenset_copy, METH_NOARGS, |
| copy_doc}, |
| {"difference", (PyCFunction)set_difference_multi, METH_VARARGS, |
| difference_doc}, |
| {"intersection",(PyCFunction)set_intersection_multi, METH_VARARGS, |
| intersection_doc}, |
| {"isdisjoint", (PyCFunction)set_isdisjoint, METH_O, |
| isdisjoint_doc}, |
| {"issubset", (PyCFunction)set_issubset, METH_O, |
| issubset_doc}, |
| {"issuperset", (PyCFunction)set_issuperset, METH_O, |
| issuperset_doc}, |
| {"__reduce__", (PyCFunction)set_reduce, METH_NOARGS, |
| reduce_doc}, |
| {"__sizeof__", (PyCFunction)set_sizeof, METH_NOARGS, |
| sizeof_doc}, |
| {"symmetric_difference",(PyCFunction)set_symmetric_difference, METH_O, |
| symmetric_difference_doc}, |
| {"union", (PyCFunction)set_union, METH_VARARGS, |
| union_doc}, |
| {NULL, NULL} /* sentinel */ |
| }; |
| |
| static PyNumberMethods frozenset_as_number = { |
| 0, /*nb_add*/ |
| (binaryfunc)set_sub, /*nb_subtract*/ |
| 0, /*nb_multiply*/ |
| 0, /*nb_remainder*/ |
| 0, /*nb_divmod*/ |
| 0, /*nb_power*/ |
| 0, /*nb_negative*/ |
| 0, /*nb_positive*/ |
| 0, /*nb_absolute*/ |
| 0, /*nb_bool*/ |
| 0, /*nb_invert*/ |
| 0, /*nb_lshift*/ |
| 0, /*nb_rshift*/ |
| (binaryfunc)set_and, /*nb_and*/ |
| (binaryfunc)set_xor, /*nb_xor*/ |
| (binaryfunc)set_or, /*nb_or*/ |
| }; |
| |
| PyDoc_STRVAR(frozenset_doc, |
| "frozenset() -> empty frozenset object\n\ |
| frozenset(iterable) -> frozenset object\n\ |
| \n\ |
| Build an immutable unordered collection of unique elements."); |
| |
| PyTypeObject PyFrozenSet_Type = { |
| PyVarObject_HEAD_INIT(&PyType_Type, 0) |
| "frozenset", /* tp_name */ |
| sizeof(PySetObject), /* tp_basicsize */ |
| 0, /* tp_itemsize */ |
| /* methods */ |
| (destructor)set_dealloc, /* tp_dealloc */ |
| 0, /* tp_print */ |
| 0, /* tp_getattr */ |
| 0, /* tp_setattr */ |
| 0, /* tp_reserved */ |
| (reprfunc)set_repr, /* tp_repr */ |
| &frozenset_as_number, /* tp_as_number */ |
| &set_as_sequence, /* tp_as_sequence */ |
| 0, /* tp_as_mapping */ |
| frozenset_hash, /* tp_hash */ |
| 0, /* tp_call */ |
| 0, /* tp_str */ |
| PyObject_GenericGetAttr, /* tp_getattro */ |
| 0, /* tp_setattro */ |
| 0, /* tp_as_buffer */ |
| Py_TPFLAGS_DEFAULT | Py_TPFLAGS_HAVE_GC | |
| Py_TPFLAGS_BASETYPE, /* tp_flags */ |
| frozenset_doc, /* tp_doc */ |
| (traverseproc)set_traverse, /* tp_traverse */ |
| (inquiry)set_clear_internal, /* tp_clear */ |
| (richcmpfunc)set_richcompare, /* tp_richcompare */ |
| offsetof(PySetObject, weakreflist), /* tp_weaklistoffset */ |
| (getiterfunc)set_iter, /* tp_iter */ |
| 0, /* tp_iternext */ |
| frozenset_methods, /* tp_methods */ |
| 0, /* tp_members */ |
| 0, /* tp_getset */ |
| 0, /* tp_base */ |
| 0, /* tp_dict */ |
| 0, /* tp_descr_get */ |
| 0, /* tp_descr_set */ |
| 0, /* tp_dictoffset */ |
| 0, /* tp_init */ |
| PyType_GenericAlloc, /* tp_alloc */ |
| frozenset_new, /* tp_new */ |
| PyObject_GC_Del, /* tp_free */ |
| }; |
| |
| |
| /***** C API functions *************************************************/ |
| |
| PyObject * |
| PySet_New(PyObject *iterable) |
| { |
| return make_new_set(&PySet_Type, iterable); |
| } |
| |
| PyObject * |
| PyFrozenSet_New(PyObject *iterable) |
| { |
| return make_new_set(&PyFrozenSet_Type, iterable); |
| } |
| |
| Py_ssize_t |
| PySet_Size(PyObject *anyset) |
| { |
| if (!PyAnySet_Check(anyset)) { |
| PyErr_BadInternalCall(); |
| return -1; |
| } |
| return PySet_GET_SIZE(anyset); |
| } |
| |
| int |
| PySet_Clear(PyObject *set) |
| { |
| if (!PySet_Check(set)) { |
| PyErr_BadInternalCall(); |
| return -1; |
| } |
| return set_clear_internal((PySetObject *)set); |
| } |
| |
| int |
| PySet_Contains(PyObject *anyset, PyObject *key) |
| { |
| if (!PyAnySet_Check(anyset)) { |
| PyErr_BadInternalCall(); |
| return -1; |
| } |
| return set_contains_key((PySetObject *)anyset, key); |
| } |
| |
| int |
| PySet_Discard(PyObject *set, PyObject *key) |
| { |
| if (!PySet_Check(set)) { |
| PyErr_BadInternalCall(); |
| return -1; |
| } |
| return set_discard_key((PySetObject *)set, key); |
| } |
| |
| int |
| PySet_Add(PyObject *anyset, PyObject *key) |
| { |
| if (!PySet_Check(anyset) && |
| (!PyFrozenSet_Check(anyset) || Py_REFCNT(anyset) != 1)) { |
| PyErr_BadInternalCall(); |
| return -1; |
| } |
| return set_add_key((PySetObject *)anyset, key); |
| } |
| |
| int |
| _PySet_NextEntry(PyObject *set, Py_ssize_t *pos, PyObject **key, Py_hash_t *hash) |
| { |
| setentry *entry; |
| |
| if (!PyAnySet_Check(set)) { |
| PyErr_BadInternalCall(); |
| return -1; |
| } |
| if (set_next((PySetObject *)set, pos, &entry) == 0) |
| return 0; |
| *key = entry->key; |
| *hash = entry->hash; |
| return 1; |
| } |
| |
| PyObject * |
| PySet_Pop(PyObject *set) |
| { |
| if (!PySet_Check(set)) { |
| PyErr_BadInternalCall(); |
| return NULL; |
| } |
| return set_pop((PySetObject *)set); |
| } |
| |
| int |
| _PySet_Update(PyObject *set, PyObject *iterable) |
| { |
| if (!PySet_Check(set)) { |
| PyErr_BadInternalCall(); |
| return -1; |
| } |
| return set_update_internal((PySetObject *)set, iterable); |
| } |
| |
| /* Exported for the gdb plugin's benefit. */ |
| PyObject *_PySet_Dummy = dummy; |
| |
| #ifdef Py_DEBUG |
| |
| /* Test code to be called with any three element set. |
| Returns True and original set is restored. */ |
| |
| #define assertRaises(call_return_value, exception) \ |
| do { \ |
| assert(call_return_value); \ |
| assert(PyErr_ExceptionMatches(exception)); \ |
| PyErr_Clear(); \ |
| } while(0) |
| |
| static PyObject * |
| test_c_api(PySetObject *so) |
| { |
| Py_ssize_t count; |
| char *s; |
| Py_ssize_t i; |
| PyObject *elem=NULL, *dup=NULL, *t, *f, *dup2, *x=NULL; |
| PyObject *ob = (PyObject *)so; |
| Py_hash_t hash; |
| PyObject *str; |
| |
| /* Verify preconditions */ |
| assert(PyAnySet_Check(ob)); |
| assert(PyAnySet_CheckExact(ob)); |
| assert(!PyFrozenSet_CheckExact(ob)); |
| |
| /* so.clear(); so |= set("abc"); */ |
| str = PyUnicode_FromString("abc"); |
| if (str == NULL) |
| return NULL; |
| set_clear_internal(so); |
| if (set_update_internal(so, str) == -1) { |
| Py_DECREF(str); |
| return NULL; |
| } |
| Py_DECREF(str); |
| |
| /* Exercise type/size checks */ |
| assert(PySet_Size(ob) == 3); |
| assert(PySet_GET_SIZE(ob) == 3); |
| |
| /* Raise TypeError for non-iterable constructor arguments */ |
| assertRaises(PySet_New(Py_None) == NULL, PyExc_TypeError); |
| assertRaises(PyFrozenSet_New(Py_None) == NULL, PyExc_TypeError); |
| |
| /* Raise TypeError for unhashable key */ |
| dup = PySet_New(ob); |
| assertRaises(PySet_Discard(ob, dup) == -1, PyExc_TypeError); |
| assertRaises(PySet_Contains(ob, dup) == -1, PyExc_TypeError); |
| assertRaises(PySet_Add(ob, dup) == -1, PyExc_TypeError); |
| |
| /* Exercise successful pop, contains, add, and discard */ |
| elem = PySet_Pop(ob); |
| assert(PySet_Contains(ob, elem) == 0); |
| assert(PySet_GET_SIZE(ob) == 2); |
| assert(PySet_Add(ob, elem) == 0); |
| assert(PySet_Contains(ob, elem) == 1); |
| assert(PySet_GET_SIZE(ob) == 3); |
| assert(PySet_Discard(ob, elem) == 1); |
| assert(PySet_GET_SIZE(ob) == 2); |
| assert(PySet_Discard(ob, elem) == 0); |
| assert(PySet_GET_SIZE(ob) == 2); |
| |
| /* Exercise clear */ |
| dup2 = PySet_New(dup); |
| assert(PySet_Clear(dup2) == 0); |
| assert(PySet_Size(dup2) == 0); |
| Py_DECREF(dup2); |
| |
| /* Raise SystemError on clear or update of frozen set */ |
| f = PyFrozenSet_New(dup); |
| assertRaises(PySet_Clear(f) == -1, PyExc_SystemError); |
| assertRaises(_PySet_Update(f, dup) == -1, PyExc_SystemError); |
| assert(PySet_Add(f, elem) == 0); |
| Py_INCREF(f); |
| assertRaises(PySet_Add(f, elem) == -1, PyExc_SystemError); |
| Py_DECREF(f); |
| Py_DECREF(f); |
| |
| /* Exercise direct iteration */ |
| i = 0, count = 0; |
| while (_PySet_NextEntry((PyObject *)dup, &i, &x, &hash)) { |
| s = _PyUnicode_AsString(x); |
| assert(s && (s[0] == 'a' || s[0] == 'b' || s[0] == 'c')); |
| count++; |
| } |
| assert(count == 3); |
| |
| /* Exercise updates */ |
| dup2 = PySet_New(NULL); |
| assert(_PySet_Update(dup2, dup) == 0); |
| assert(PySet_Size(dup2) == 3); |
| assert(_PySet_Update(dup2, dup) == 0); |
| assert(PySet_Size(dup2) == 3); |
| Py_DECREF(dup2); |
| |
| /* Raise SystemError when self argument is not a set or frozenset. */ |
| t = PyTuple_New(0); |
| assertRaises(PySet_Size(t) == -1, PyExc_SystemError); |
| assertRaises(PySet_Contains(t, elem) == -1, PyExc_SystemError); |
| Py_DECREF(t); |
| |
| /* Raise SystemError when self argument is not a set. */ |
| f = PyFrozenSet_New(dup); |
| assert(PySet_Size(f) == 3); |
| assert(PyFrozenSet_CheckExact(f)); |
| assertRaises(PySet_Discard(f, elem) == -1, PyExc_SystemError); |
| assertRaises(PySet_Pop(f) == NULL, PyExc_SystemError); |
| Py_DECREF(f); |
| |
| /* Raise KeyError when popping from an empty set */ |
| assert(PyNumber_InPlaceSubtract(ob, ob) == ob); |
| Py_DECREF(ob); |
| assert(PySet_GET_SIZE(ob) == 0); |
| assertRaises(PySet_Pop(ob) == NULL, PyExc_KeyError); |
| |
| /* Restore the set from the copy using the PyNumber API */ |
| assert(PyNumber_InPlaceOr(ob, dup) == ob); |
| Py_DECREF(ob); |
| |
| /* Verify constructors accept NULL arguments */ |
| f = PySet_New(NULL); |
| assert(f != NULL); |
| assert(PySet_GET_SIZE(f) == 0); |
| Py_DECREF(f); |
| f = PyFrozenSet_New(NULL); |
| assert(f != NULL); |
| assert(PyFrozenSet_CheckExact(f)); |
| assert(PySet_GET_SIZE(f) == 0); |
| Py_DECREF(f); |
| |
| Py_DECREF(elem); |
| Py_DECREF(dup); |
| Py_RETURN_TRUE; |
| } |
| |
| #undef assertRaises |
| |
| #endif |
| |
| /***** Dummy Struct *************************************************/ |
| |
| static PyObject * |
| dummy_repr(PyObject *op) |
| { |
| return PyUnicode_FromString("<dummy key>"); |
| } |
| |
| static void |
| dummy_dealloc(PyObject* ignore) |
| { |
| Py_FatalError("deallocating <dummy key>"); |
| } |
| |
| static PyTypeObject _PySetDummy_Type = { |
| PyVarObject_HEAD_INIT(&PyType_Type, 0) |
| "<dummy key> type", |
| 0, |
| 0, |
| dummy_dealloc, /*tp_dealloc*/ /*never called*/ |
| 0, /*tp_print*/ |
| 0, /*tp_getattr*/ |
| 0, /*tp_setattr*/ |
| 0, /*tp_reserved*/ |
| dummy_repr, /*tp_repr*/ |
| 0, /*tp_as_number*/ |
| 0, /*tp_as_sequence*/ |
| 0, /*tp_as_mapping*/ |
| 0, /*tp_hash */ |
| 0, /*tp_call */ |
| 0, /*tp_str */ |
| 0, /*tp_getattro */ |
| 0, /*tp_setattro */ |
| 0, /*tp_as_buffer */ |
| Py_TPFLAGS_DEFAULT, /*tp_flags */ |
| }; |
| |
| static PyObject _dummy_struct = { |
| _PyObject_EXTRA_INIT |
| 2, &_PySetDummy_Type |
| }; |
| |