| #include "Python.h" |
| #ifdef MS_WINDOWS |
| # include <windows.h> |
| /* All sample MSDN wincrypt programs include the header below. It is at least |
| * required with Min GW. */ |
| # include <wincrypt.h> |
| #else |
| # include <fcntl.h> |
| # ifdef HAVE_SYS_STAT_H |
| # include <sys/stat.h> |
| # endif |
| # ifdef HAVE_LINUX_RANDOM_H |
| # include <linux/random.h> |
| # endif |
| # if defined(HAVE_SYS_RANDOM_H) && (defined(HAVE_GETRANDOM) || defined(HAVE_GETENTROPY)) |
| # include <sys/random.h> |
| # endif |
| # if !defined(HAVE_GETRANDOM) && defined(HAVE_GETRANDOM_SYSCALL) |
| # include <sys/syscall.h> |
| # endif |
| #endif |
| |
| #ifdef Py_DEBUG |
| int _Py_HashSecret_Initialized = 0; |
| #else |
| static int _Py_HashSecret_Initialized = 0; |
| #endif |
| |
| #ifdef MS_WINDOWS |
| static HCRYPTPROV hCryptProv = 0; |
| |
| static int |
| win32_urandom_init(int raise) |
| { |
| /* Acquire context */ |
| if (!CryptAcquireContext(&hCryptProv, NULL, NULL, |
| PROV_RSA_FULL, CRYPT_VERIFYCONTEXT)) |
| goto error; |
| |
| return 0; |
| |
| error: |
| if (raise) { |
| PyErr_SetFromWindowsErr(0); |
| } |
| return -1; |
| } |
| |
| /* Fill buffer with size pseudo-random bytes generated by the Windows CryptoGen |
| API. Return 0 on success, or raise an exception and return -1 on error. */ |
| static int |
| win32_urandom(unsigned char *buffer, Py_ssize_t size, int raise) |
| { |
| Py_ssize_t chunk; |
| |
| if (hCryptProv == 0) |
| { |
| if (win32_urandom_init(raise) == -1) { |
| return -1; |
| } |
| } |
| |
| while (size > 0) |
| { |
| chunk = size > INT_MAX ? INT_MAX : size; |
| if (!CryptGenRandom(hCryptProv, (DWORD)chunk, buffer)) |
| { |
| /* CryptGenRandom() failed */ |
| if (raise) { |
| PyErr_SetFromWindowsErr(0); |
| } |
| return -1; |
| } |
| buffer += chunk; |
| size -= chunk; |
| } |
| return 0; |
| } |
| |
| #else /* !MS_WINDOWS */ |
| |
| #if defined(HAVE_GETRANDOM) || defined(HAVE_GETRANDOM_SYSCALL) |
| #define PY_GETRANDOM 1 |
| |
| /* Call getrandom() to get random bytes: |
| |
| - Return 1 on success |
| - Return 0 if getrandom() is not available (failed with ENOSYS or EPERM), |
| or if getrandom(GRND_NONBLOCK) failed with EAGAIN (system urandom not |
| initialized yet) and raise=0. |
| - Raise an exception (if raise is non-zero) and return -1 on error: |
| if getrandom() failed with EINTR, raise is non-zero and the Python signal |
| handler raised an exception, or if getrandom() failed with a different |
| error. |
| |
| getrandom() is retried if it failed with EINTR: interrupted by a signal. */ |
| static int |
| py_getrandom(void *buffer, Py_ssize_t size, int blocking, int raise) |
| { |
| /* Is getrandom() supported by the running kernel? Set to 0 if getrandom() |
| failed with ENOSYS or EPERM. Need Linux kernel 3.17 or newer, or Solaris |
| 11.3 or newer */ |
| static int getrandom_works = 1; |
| int flags; |
| char *dest; |
| long n; |
| |
| if (!getrandom_works) { |
| return 0; |
| } |
| |
| flags = blocking ? 0 : GRND_NONBLOCK; |
| dest = buffer; |
| while (0 < size) { |
| #ifdef sun |
| /* Issue #26735: On Solaris, getrandom() is limited to returning up |
| to 1024 bytes. Call it multiple times if more bytes are |
| requested. */ |
| n = Py_MIN(size, 1024); |
| #else |
| n = Py_MIN(size, LONG_MAX); |
| #endif |
| |
| errno = 0; |
| #ifdef HAVE_GETRANDOM |
| if (raise) { |
| Py_BEGIN_ALLOW_THREADS |
| n = getrandom(dest, n, flags); |
| Py_END_ALLOW_THREADS |
| } |
| else { |
| n = getrandom(dest, n, flags); |
| } |
| #else |
| /* On Linux, use the syscall() function because the GNU libc doesn't |
| expose the Linux getrandom() syscall yet. See: |
| https://sourceware.org/bugzilla/show_bug.cgi?id=17252 */ |
| if (raise) { |
| Py_BEGIN_ALLOW_THREADS |
| n = syscall(SYS_getrandom, dest, n, flags); |
| Py_END_ALLOW_THREADS |
| } |
| else { |
| n = syscall(SYS_getrandom, dest, n, flags); |
| } |
| #endif |
| |
| if (n < 0) { |
| /* ENOSYS: the syscall is not supported by the kernel. |
| EPERM: the syscall is blocked by a security policy (ex: SECCOMP) |
| or something else. */ |
| if (errno == ENOSYS || errno == EPERM) { |
| getrandom_works = 0; |
| return 0; |
| } |
| |
| /* getrandom(GRND_NONBLOCK) fails with EAGAIN if the system urandom |
| is not initialiazed yet. For _PyRandom_Init(), we ignore the |
| error and fall back on reading /dev/urandom which never blocks, |
| even if the system urandom is not initialized yet: |
| see the PEP 524. */ |
| if (errno == EAGAIN && !raise && !blocking) { |
| return 0; |
| } |
| |
| if (errno == EINTR) { |
| if (raise) { |
| if (PyErr_CheckSignals()) { |
| return -1; |
| } |
| } |
| |
| /* retry getrandom() if it was interrupted by a signal */ |
| continue; |
| } |
| |
| if (raise) { |
| PyErr_SetFromErrno(PyExc_OSError); |
| } |
| return -1; |
| } |
| |
| dest += n; |
| size -= n; |
| } |
| return 1; |
| } |
| |
| #elif defined(HAVE_GETENTROPY) |
| #define PY_GETENTROPY 1 |
| |
| /* Fill buffer with size pseudo-random bytes generated by getentropy(): |
| |
| - Return 1 on success |
| - Return 0 if getentropy() syscall is not available (failed with ENOSYS or |
| EPERM). |
| - Raise an exception (if raise is non-zero) and return -1 on error: |
| if getentropy() failed with EINTR, raise is non-zero and the Python signal |
| handler raised an exception, or if getentropy() failed with a different |
| error. |
| |
| getentropy() is retried if it failed with EINTR: interrupted by a signal. */ |
| static int |
| py_getentropy(char *buffer, Py_ssize_t size, int raise) |
| { |
| /* Is getentropy() supported by the running kernel? Set to 0 if |
| getentropy() failed with ENOSYS or EPERM. */ |
| static int getentropy_works = 1; |
| |
| if (!getentropy_works) { |
| return 0; |
| } |
| |
| while (size > 0) { |
| /* getentropy() is limited to returning up to 256 bytes. Call it |
| multiple times if more bytes are requested. */ |
| Py_ssize_t len = Py_MIN(size, 256); |
| int res; |
| |
| if (raise) { |
| Py_BEGIN_ALLOW_THREADS |
| res = getentropy(buffer, len); |
| Py_END_ALLOW_THREADS |
| } |
| else { |
| res = getentropy(buffer, len); |
| } |
| |
| if (res < 0) { |
| /* ENOSYS: the syscall is not supported by the running kernel. |
| EPERM: the syscall is blocked by a security policy (ex: SECCOMP) |
| or something else. */ |
| if (errno == ENOSYS || errno == EPERM) { |
| getentropy_works = 0; |
| return 0; |
| } |
| |
| if (errno == EINTR) { |
| if (raise) { |
| if (PyErr_CheckSignals()) { |
| return -1; |
| } |
| } |
| |
| /* retry getentropy() if it was interrupted by a signal */ |
| continue; |
| } |
| |
| if (raise) { |
| PyErr_SetFromErrno(PyExc_OSError); |
| } |
| return -1; |
| } |
| |
| buffer += len; |
| size -= len; |
| } |
| return 1; |
| } |
| #endif /* defined(HAVE_GETENTROPY) && !defined(sun) */ |
| |
| |
| static struct { |
| int fd; |
| dev_t st_dev; |
| ino_t st_ino; |
| } urandom_cache = { -1 }; |
| |
| /* Read random bytes from the /dev/urandom device: |
| |
| - Return 0 on success |
| - Raise an exception (if raise is non-zero) and return -1 on error |
| |
| Possible causes of errors: |
| |
| - open() failed with ENOENT, ENXIO, ENODEV, EACCES: the /dev/urandom device |
| was not found. For example, it was removed manually or not exposed in a |
| chroot or container. |
| - open() failed with a different error |
| - fstat() failed |
| - read() failed or returned 0 |
| |
| read() is retried if it failed with EINTR: interrupted by a signal. |
| |
| The file descriptor of the device is kept open between calls to avoid using |
| many file descriptors when run in parallel from multiple threads: |
| see the issue #18756. |
| |
| st_dev and st_ino fields of the file descriptor (from fstat()) are cached to |
| check if the file descriptor was replaced by a different file (which is |
| likely a bug in the application): see the issue #21207. |
| |
| If the file descriptor was closed or replaced, open a new file descriptor |
| but don't close the old file descriptor: it probably points to something |
| important for some third-party code. */ |
| static int |
| dev_urandom(char *buffer, Py_ssize_t size, int raise) |
| { |
| int fd; |
| Py_ssize_t n; |
| |
| if (raise) { |
| struct _Py_stat_struct st; |
| |
| if (urandom_cache.fd >= 0) { |
| /* Does the fd point to the same thing as before? (issue #21207) */ |
| if (_Py_fstat_noraise(urandom_cache.fd, &st) |
| || st.st_dev != urandom_cache.st_dev |
| || st.st_ino != urandom_cache.st_ino) { |
| /* Something changed: forget the cached fd (but don't close it, |
| since it probably points to something important for some |
| third-party code). */ |
| urandom_cache.fd = -1; |
| } |
| } |
| if (urandom_cache.fd >= 0) |
| fd = urandom_cache.fd; |
| else { |
| fd = _Py_open("/dev/urandom", O_RDONLY); |
| if (fd < 0) { |
| if (errno == ENOENT || errno == ENXIO || |
| errno == ENODEV || errno == EACCES) { |
| PyErr_SetString(PyExc_NotImplementedError, |
| "/dev/urandom (or equivalent) not found"); |
| } |
| /* otherwise, keep the OSError exception raised by _Py_open() */ |
| return -1; |
| } |
| if (urandom_cache.fd >= 0) { |
| /* urandom_fd was initialized by another thread while we were |
| not holding the GIL, keep it. */ |
| close(fd); |
| fd = urandom_cache.fd; |
| } |
| else { |
| if (_Py_fstat(fd, &st)) { |
| close(fd); |
| return -1; |
| } |
| else { |
| urandom_cache.fd = fd; |
| urandom_cache.st_dev = st.st_dev; |
| urandom_cache.st_ino = st.st_ino; |
| } |
| } |
| } |
| |
| do { |
| n = _Py_read(fd, buffer, (size_t)size); |
| if (n == -1) |
| return -1; |
| if (n == 0) { |
| PyErr_Format(PyExc_RuntimeError, |
| "Failed to read %zi bytes from /dev/urandom", |
| size); |
| return -1; |
| } |
| |
| buffer += n; |
| size -= n; |
| } while (0 < size); |
| } |
| else { |
| fd = _Py_open_noraise("/dev/urandom", O_RDONLY); |
| if (fd < 0) { |
| return -1; |
| } |
| |
| while (0 < size) |
| { |
| do { |
| n = read(fd, buffer, (size_t)size); |
| } while (n < 0 && errno == EINTR); |
| |
| if (n <= 0) { |
| /* stop on error or if read(size) returned 0 */ |
| close(fd); |
| return -1; |
| } |
| |
| buffer += n; |
| size -= n; |
| } |
| close(fd); |
| } |
| return 0; |
| } |
| |
| static void |
| dev_urandom_close(void) |
| { |
| if (urandom_cache.fd >= 0) { |
| close(urandom_cache.fd); |
| urandom_cache.fd = -1; |
| } |
| } |
| #endif /* !MS_WINDOWS */ |
| |
| |
| /* Fill buffer with pseudo-random bytes generated by a linear congruent |
| generator (LCG): |
| |
| x(n+1) = (x(n) * 214013 + 2531011) % 2^32 |
| |
| Use bits 23..16 of x(n) to generate a byte. */ |
| static void |
| lcg_urandom(unsigned int x0, unsigned char *buffer, size_t size) |
| { |
| size_t index; |
| unsigned int x; |
| |
| x = x0; |
| for (index=0; index < size; index++) { |
| x *= 214013; |
| x += 2531011; |
| /* modulo 2 ^ (8 * sizeof(int)) */ |
| buffer[index] = (x >> 16) & 0xff; |
| } |
| } |
| |
| /* Read random bytes: |
| |
| - Return 0 on success |
| - Raise an exception (if raise is non-zero) and return -1 on error |
| |
| Used sources of entropy ordered by preference, preferred source first: |
| |
| - CryptGenRandom() on Windows |
| - getrandom() function (ex: Linux and Solaris): call py_getrandom() |
| - getentropy() function (ex: OpenBSD): call py_getentropy() |
| - /dev/urandom device |
| |
| Read from the /dev/urandom device if getrandom() or getentropy() function |
| is not available or does not work. |
| |
| Prefer getrandom() over getentropy() because getrandom() supports blocking |
| and non-blocking mode: see the PEP 524. Python requires non-blocking RNG at |
| startup to initialize its hash secret, but os.urandom() must block until the |
| system urandom is initialized (at least on Linux 3.17 and newer). |
| |
| Prefer getrandom() and getentropy() over reading directly /dev/urandom |
| because these functions don't need file descriptors and so avoid ENFILE or |
| EMFILE errors (too many open files): see the issue #18756. |
| |
| Only the getrandom() function supports non-blocking mode. |
| |
| Only use RNG running in the kernel. They are more secure because it is |
| harder to get the internal state of a RNG running in the kernel land than a |
| RNG running in the user land. The kernel has a direct access to the hardware |
| and has access to hardware RNG, they are used as entropy sources. |
| |
| Note: the OpenSSL RAND_pseudo_bytes() function does not automatically reseed |
| its RNG on fork(), two child processes (with the same pid) generate the same |
| random numbers: see issue #18747. Kernel RNGs don't have this issue, |
| they have access to good quality entropy sources. |
| |
| If raise is zero: |
| |
| - Don't raise an exception on error |
| - Don't call the Python signal handler (don't call PyErr_CheckSignals()) if |
| a function fails with EINTR: retry directly the interrupted function |
| - Don't release the GIL to call functions. |
| */ |
| static int |
| pyurandom(void *buffer, Py_ssize_t size, int blocking, int raise) |
| { |
| #if defined(PY_GETRANDOM) || defined(PY_GETENTROPY) |
| int res; |
| #endif |
| |
| if (size < 0) { |
| if (raise) { |
| PyErr_Format(PyExc_ValueError, |
| "negative argument not allowed"); |
| } |
| return -1; |
| } |
| |
| if (size == 0) { |
| return 0; |
| } |
| |
| #ifdef MS_WINDOWS |
| return win32_urandom((unsigned char *)buffer, size, raise); |
| #else |
| |
| #if defined(PY_GETRANDOM) || defined(PY_GETENTROPY) |
| #ifdef PY_GETRANDOM |
| res = py_getrandom(buffer, size, blocking, raise); |
| #else |
| res = py_getentropy(buffer, size, raise); |
| #endif |
| if (res < 0) { |
| return -1; |
| } |
| if (res == 1) { |
| return 0; |
| } |
| /* getrandom() or getentropy() function is not available: failed with |
| ENOSYS or EPERM. Fall back on reading from /dev/urandom. */ |
| #endif |
| |
| return dev_urandom(buffer, size, raise); |
| #endif |
| } |
| |
| /* Fill buffer with size pseudo-random bytes from the operating system random |
| number generator (RNG). It is suitable for most cryptographic purposes |
| except long living private keys for asymmetric encryption. |
| |
| On Linux 3.17 and newer, the getrandom() syscall is used in blocking mode: |
| block until the system urandom entropy pool is initialized (128 bits are |
| collected by the kernel). |
| |
| Return 0 on success. Raise an exception and return -1 on error. */ |
| int |
| _PyOS_URandom(void *buffer, Py_ssize_t size) |
| { |
| return pyurandom(buffer, size, 1, 1); |
| } |
| |
| /* Fill buffer with size pseudo-random bytes from the operating system random |
| number generator (RNG). It is not suitable for cryptographic purpose. |
| |
| On Linux 3.17 and newer (when getrandom() syscall is used), if the system |
| urandom is not initialized yet, the function returns "weak" entropy read |
| from /dev/urandom. |
| |
| Return 0 on success. Raise an exception and return -1 on error. */ |
| int |
| _PyOS_URandomNonblock(void *buffer, Py_ssize_t size) |
| { |
| return pyurandom(buffer, size, 0, 1); |
| } |
| |
| int Py_ReadHashSeed(char *seed_text, |
| int *use_hash_seed, |
| unsigned long *hash_seed) |
| { |
| Py_BUILD_ASSERT(sizeof(_Py_HashSecret_t) == sizeof(_Py_HashSecret.uc)); |
| /* Convert a text seed to a numeric one */ |
| if (seed_text && *seed_text != '\0' && strcmp(seed_text, "random") != 0) { |
| char *endptr = seed_text; |
| unsigned long seed; |
| seed = strtoul(seed_text, &endptr, 10); |
| if (*endptr != '\0' |
| || seed > 4294967295UL |
| || (errno == ERANGE && seed == ULONG_MAX)) |
| { |
| return -1; |
| } |
| /* Use a specific hash */ |
| *use_hash_seed = 1; |
| *hash_seed = seed; |
| } |
| else { |
| /* Use a random hash */ |
| *use_hash_seed = 0; |
| *hash_seed = 0; |
| } |
| return 0; |
| } |
| |
| static _PyInitError |
| init_hash_secret(int use_hash_seed, |
| unsigned long hash_seed) |
| { |
| void *secret = &_Py_HashSecret; |
| Py_ssize_t secret_size = sizeof(_Py_HashSecret_t); |
| |
| if (_Py_HashSecret_Initialized) { |
| return _Py_INIT_OK(); |
| } |
| _Py_HashSecret_Initialized = 1; |
| |
| if (use_hash_seed) { |
| if (hash_seed == 0) { |
| /* disable the randomized hash */ |
| memset(secret, 0, secret_size); |
| } |
| else { |
| /* use the specified hash seed */ |
| lcg_urandom(hash_seed, secret, secret_size); |
| } |
| } |
| else { |
| /* use a random hash seed */ |
| int res; |
| |
| /* _PyRandom_Init() is called very early in the Python initialization |
| and so exceptions cannot be used (use raise=0). |
| |
| _PyRandom_Init() must not block Python initialization: call |
| pyurandom() is non-blocking mode (blocking=0): see the PEP 524. */ |
| res = pyurandom(secret, secret_size, 0, 0); |
| if (res < 0) { |
| return _Py_INIT_USER_ERR("failed to get random numbers " |
| "to initialize Python"); |
| } |
| } |
| return _Py_INIT_OK(); |
| } |
| |
| _PyInitError |
| _Py_HashRandomization_Init(_PyCoreConfig *core_config) |
| { |
| char *seed_text; |
| int use_hash_seed = core_config->use_hash_seed; |
| unsigned long hash_seed = core_config->hash_seed; |
| |
| if (use_hash_seed < 0) { |
| seed_text = Py_GETENV("PYTHONHASHSEED"); |
| if (Py_ReadHashSeed(seed_text, &use_hash_seed, &hash_seed) < 0) { |
| return _Py_INIT_USER_ERR("PYTHONHASHSEED must be \"random\" " |
| "or an integer in range [0; 4294967295]"); |
| } |
| core_config->use_hash_seed = use_hash_seed; |
| core_config->hash_seed = hash_seed; |
| } |
| return init_hash_secret(use_hash_seed, hash_seed); |
| } |
| |
| void |
| _Py_HashRandomization_Fini(void) |
| { |
| #ifdef MS_WINDOWS |
| if (hCryptProv) { |
| CryptReleaseContext(hCryptProv, 0); |
| hCryptProv = 0; |
| } |
| #else |
| dev_urandom_close(); |
| #endif |
| } |