| :mod:`time` --- Time access and conversions |
| =========================================== |
| |
| .. module:: time |
| :synopsis: Time access and conversions. |
| |
| |
| This module provides various time-related functions. For related |
| functionality, see also the :mod:`datetime` and :mod:`calendar` modules. |
| |
| Although this module is always available, |
| not all functions are available on all platforms. Most of the functions |
| defined in this module call platform C library functions with the same name. It |
| may sometimes be helpful to consult the platform documentation, because the |
| semantics of these functions varies among platforms. |
| |
| An explanation of some terminology and conventions is in order. |
| |
| .. index:: single: epoch |
| |
| * The :dfn:`epoch` is the point where the time starts. On January 1st of that |
| year, at 0 hours, the "time since the epoch" is zero. For Unix, the epoch is |
| 1970. To find out what the epoch is, look at ``gmtime(0)``. |
| |
| .. index:: single: Year 2038 |
| |
| * The functions in this module do not handle dates and times before the epoch or |
| far in the future. The cut-off point in the future is determined by the C |
| library; for Unix, it is typically in 2038. |
| |
| .. index:: |
| single: Year 2000 |
| single: Y2K |
| |
| * **Year 2000 (Y2K) issues**: Python depends on the platform's C library, which |
| generally doesn't have year 2000 issues, since all dates and times are |
| represented internally as seconds since the epoch. Functions accepting a |
| :class:`struct_time` (see below) generally require a 4-digit year. For backward |
| compatibility, 2-digit years are supported if the module variable |
| ``accept2dyear`` is a non-zero integer; this variable is initialized to ``1`` |
| unless the environment variable :envvar:`PYTHONY2K` is set to a non-empty |
| string, in which case it is initialized to ``0``. Thus, you can set |
| :envvar:`PYTHONY2K` to a non-empty string in the environment to require 4-digit |
| years for all year input. When 2-digit years are accepted, they are converted |
| according to the POSIX or X/Open standard: values 69-99 are mapped to 1969-1999, |
| and values 0--68 are mapped to 2000--2068. Values 100--1899 are always illegal. |
| Note that this is new as of Python 1.5.2(a2); earlier versions, up to Python |
| 1.5.1 and 1.5.2a1, would add 1900 to year values below 1900. |
| |
| .. index:: |
| single: UTC |
| single: Coordinated Universal Time |
| single: Greenwich Mean Time |
| |
| * UTC is Coordinated Universal Time (formerly known as Greenwich Mean Time, or |
| GMT). The acronym UTC is not a mistake but a compromise between English and |
| French. |
| |
| .. index:: single: Daylight Saving Time |
| |
| * DST is Daylight Saving Time, an adjustment of the timezone by (usually) one |
| hour during part of the year. DST rules are magic (determined by local law) and |
| can change from year to year. The C library has a table containing the local |
| rules (often it is read from a system file for flexibility) and is the only |
| source of True Wisdom in this respect. |
| |
| * The precision of the various real-time functions may be less than suggested by |
| the units in which their value or argument is expressed. E.g. on most Unix |
| systems, the clock "ticks" only 50 or 100 times a second. |
| |
| * On the other hand, the precision of :func:`time` and :func:`sleep` is better |
| than their Unix equivalents: times are expressed as floating point numbers, |
| :func:`time` returns the most accurate time available (using Unix |
| :cfunc:`gettimeofday` where available), and :func:`sleep` will accept a time |
| with a nonzero fraction (Unix :cfunc:`select` is used to implement this, where |
| available). |
| |
| * The time value as returned by :func:`gmtime`, :func:`localtime`, and |
| :func:`strptime`, and accepted by :func:`asctime`, :func:`mktime` and |
| :func:`strftime`, is a sequence of 9 integers. The return values of |
| :func:`gmtime`, :func:`localtime`, and :func:`strptime` also offer attribute |
| names for individual fields. |
| |
| +-------+------------------+------------------------------+ |
| | Index | Attribute | Values | |
| +=======+==================+==============================+ |
| | 0 | :attr:`tm_year` | (for example, 1993) | |
| +-------+------------------+------------------------------+ |
| | 1 | :attr:`tm_mon` | range [1,12] | |
| +-------+------------------+------------------------------+ |
| | 2 | :attr:`tm_mday` | range [1,31] | |
| +-------+------------------+------------------------------+ |
| | 3 | :attr:`tm_hour` | range [0,23] | |
| +-------+------------------+------------------------------+ |
| | 4 | :attr:`tm_min` | range [0,59] | |
| +-------+------------------+------------------------------+ |
| | 5 | :attr:`tm_sec` | range [0,61]; see **(1)** in | |
| | | | :func:`strftime` description | |
| +-------+------------------+------------------------------+ |
| | 6 | :attr:`tm_wday` | range [0,6], Monday is 0 | |
| +-------+------------------+------------------------------+ |
| | 7 | :attr:`tm_yday` | range [1,366] | |
| +-------+------------------+------------------------------+ |
| | 8 | :attr:`tm_isdst` | 0, 1 or -1; see below | |
| +-------+------------------+------------------------------+ |
| |
| Note that unlike the C structure, the month value is a range of 1-12, not 0-11. |
| A year value will be handled as described under "Year 2000 (Y2K) issues" above. |
| A ``-1`` argument as the daylight savings flag, passed to :func:`mktime` will |
| usually result in the correct daylight savings state to be filled in. |
| |
| When a tuple with an incorrect length is passed to a function expecting a |
| :class:`struct_time`, or having elements of the wrong type, a :exc:`TypeError` |
| is raised. |
| |
| * Use the following functions to convert between time representations: |
| |
| +-------------------------+-------------------------+-------------------------+ |
| | From | To | Use | |
| +=========================+=========================+=========================+ |
| | seconds since the epoch | :class:`struct_time` in | :func:`gmtime` | |
| | | UTC | | |
| +-------------------------+-------------------------+-------------------------+ |
| | seconds since the epoch | :class:`struct_time` in | :func:`localtime` | |
| | | local time | | |
| +-------------------------+-------------------------+-------------------------+ |
| | :class:`struct_time` in | seconds since the epoch | :func:`calendar.timegm` | |
| | UTC | | | |
| +-------------------------+-------------------------+-------------------------+ |
| | :class:`struct_time` in | seconds since the epoch | :func:`mktime` | |
| | local time | | | |
| +-------------------------+-------------------------+-------------------------+ |
| |
| |
| The module defines the following functions and data items: |
| |
| |
| .. data:: accept2dyear |
| |
| Boolean value indicating whether two-digit year values will be accepted. This |
| is true by default, but will be set to false if the environment variable |
| :envvar:`PYTHONY2K` has been set to a non-empty string. It may also be modified |
| at run time. |
| |
| |
| .. data:: altzone |
| |
| The offset of the local DST timezone, in seconds west of UTC, if one is defined. |
| This is negative if the local DST timezone is east of UTC (as in Western Europe, |
| including the UK). Only use this if ``daylight`` is nonzero. |
| |
| |
| .. function:: asctime([t]) |
| |
| Convert a tuple or :class:`struct_time` representing a time as returned by |
| :func:`gmtime` or :func:`localtime` to a 24-character string of the following |
| form: ``'Sun Jun 20 23:21:05 1993'``. If *t* is not provided, the current time |
| as returned by :func:`localtime` is used. Locale information is not used by |
| :func:`asctime`. |
| |
| .. note:: |
| |
| Unlike the C function of the same name, there is no trailing newline. |
| |
| |
| .. function:: clock() |
| |
| .. index:: |
| single: CPU time |
| single: processor time |
| single: benchmarking |
| |
| On Unix, return the current processor time as a floating point number expressed |
| in seconds. The precision, and in fact the very definition of the meaning of |
| "processor time", depends on that of the C function of the same name, but in any |
| case, this is the function to use for benchmarking Python or timing algorithms. |
| |
| On Windows, this function returns wall-clock seconds elapsed since the first |
| call to this function, as a floating point number, based on the Win32 function |
| :cfunc:`QueryPerformanceCounter`. The resolution is typically better than one |
| microsecond. |
| |
| |
| .. function:: ctime([secs]) |
| |
| Convert a time expressed in seconds since the epoch to a string representing |
| local time. If *secs* is not provided or :const:`None`, the current time as |
| returned by :func:`time` is used. ``ctime(secs)`` is equivalent to |
| ``asctime(localtime(secs))``. Locale information is not used by :func:`ctime`. |
| |
| |
| .. data:: daylight |
| |
| Nonzero if a DST timezone is defined. |
| |
| |
| .. function:: gmtime([secs]) |
| |
| Convert a time expressed in seconds since the epoch to a :class:`struct_time` in |
| UTC in which the dst flag is always zero. If *secs* is not provided or |
| :const:`None`, the current time as returned by :func:`time` is used. Fractions |
| of a second are ignored. See above for a description of the |
| :class:`struct_time` object. See :func:`calendar.timegm` for the inverse of this |
| function. |
| |
| |
| .. function:: localtime([secs]) |
| |
| Like :func:`gmtime` but converts to local time. If *secs* is not provided or |
| :const:`None`, the current time as returned by :func:`time` is used. The dst |
| flag is set to ``1`` when DST applies to the given time. |
| |
| |
| .. function:: mktime(t) |
| |
| This is the inverse function of :func:`localtime`. Its argument is the |
| :class:`struct_time` or full 9-tuple (since the dst flag is needed; use ``-1`` |
| as the dst flag if it is unknown) which expresses the time in *local* time, not |
| UTC. It returns a floating point number, for compatibility with :func:`time`. |
| If the input value cannot be represented as a valid time, either |
| :exc:`OverflowError` or :exc:`ValueError` will be raised (which depends on |
| whether the invalid value is caught by Python or the underlying C libraries). |
| The earliest date for which it can generate a time is platform-dependent. |
| |
| |
| .. function:: sleep(secs) |
| |
| Suspend execution for the given number of seconds. The argument may be a |
| floating point number to indicate a more precise sleep time. The actual |
| suspension time may be less than that requested because any caught signal will |
| terminate the :func:`sleep` following execution of that signal's catching |
| routine. Also, the suspension time may be longer than requested by an arbitrary |
| amount because of the scheduling of other activity in the system. |
| |
| |
| .. function:: strftime(format[, t]) |
| |
| Convert a tuple or :class:`struct_time` representing a time as returned by |
| :func:`gmtime` or :func:`localtime` to a string as specified by the *format* |
| argument. If *t* is not provided, the current time as returned by |
| :func:`localtime` is used. *format* must be a string. :exc:`ValueError` is |
| raised if any field in *t* is outside of the allowed range. |
| |
| 0 is a legal argument for any position in the time tuple; if it is normally |
| illegal the value is forced to a correct one. |
| |
| The following directives can be embedded in the *format* string. They are shown |
| without the optional field width and precision specification, and are replaced |
| by the indicated characters in the :func:`strftime` result: |
| |
| +-----------+------------------------------------------------+-------+ |
| | Directive | Meaning | Notes | |
| +===========+================================================+=======+ |
| | ``%a`` | Locale's abbreviated weekday name. | | |
| | | | | |
| +-----------+------------------------------------------------+-------+ |
| | ``%A`` | Locale's full weekday name. | | |
| +-----------+------------------------------------------------+-------+ |
| | ``%b`` | Locale's abbreviated month name. | | |
| | | | | |
| +-----------+------------------------------------------------+-------+ |
| | ``%B`` | Locale's full month name. | | |
| +-----------+------------------------------------------------+-------+ |
| | ``%c`` | Locale's appropriate date and time | | |
| | | representation. | | |
| +-----------+------------------------------------------------+-------+ |
| | ``%d`` | Day of the month as a decimal number [01,31]. | | |
| | | | | |
| +-----------+------------------------------------------------+-------+ |
| | ``%H`` | Hour (24-hour clock) as a decimal number | | |
| | | [00,23]. | | |
| +-----------+------------------------------------------------+-------+ |
| | ``%I`` | Hour (12-hour clock) as a decimal number | | |
| | | [01,12]. | | |
| +-----------+------------------------------------------------+-------+ |
| | ``%j`` | Day of the year as a decimal number [001,366]. | | |
| | | | | |
| +-----------+------------------------------------------------+-------+ |
| | ``%m`` | Month as a decimal number [01,12]. | | |
| | | | | |
| +-----------+------------------------------------------------+-------+ |
| | ``%M`` | Minute as a decimal number [00,59]. | | |
| | | | | |
| +-----------+------------------------------------------------+-------+ |
| | ``%p`` | Locale's equivalent of either AM or PM. | \(1) | |
| | | | | |
| +-----------+------------------------------------------------+-------+ |
| | ``%S`` | Second as a decimal number [00,61]. | \(2) | |
| | | | | |
| +-----------+------------------------------------------------+-------+ |
| | ``%U`` | Week number of the year (Sunday as the first | \(3) | |
| | | day of the week) as a decimal number [00,53]. | | |
| | | All days in a new year preceding the first | | |
| | | Sunday are considered to be in week 0. | | |
| | | | | |
| | | | | |
| | | | | |
| +-----------+------------------------------------------------+-------+ |
| | ``%w`` | Weekday as a decimal number [0(Sunday),6]. | | |
| | | | | |
| +-----------+------------------------------------------------+-------+ |
| | ``%W`` | Week number of the year (Monday as the first | \(3) | |
| | | day of the week) as a decimal number [00,53]. | | |
| | | All days in a new year preceding the first | | |
| | | Monday are considered to be in week 0. | | |
| | | | | |
| | | | | |
| | | | | |
| +-----------+------------------------------------------------+-------+ |
| | ``%x`` | Locale's appropriate date representation. | | |
| | | | | |
| +-----------+------------------------------------------------+-------+ |
| | ``%X`` | Locale's appropriate time representation. | | |
| | | | | |
| +-----------+------------------------------------------------+-------+ |
| | ``%y`` | Year without century as a decimal number | | |
| | | [00,99]. | | |
| +-----------+------------------------------------------------+-------+ |
| | ``%Y`` | Year with century as a decimal number. | | |
| | | | | |
| +-----------+------------------------------------------------+-------+ |
| | ``%Z`` | Time zone name (no characters if no time zone | | |
| | | exists). | | |
| +-----------+------------------------------------------------+-------+ |
| | ``%%`` | A literal ``'%'`` character. | | |
| +-----------+------------------------------------------------+-------+ |
| |
| Notes: |
| |
| (1) |
| When used with the :func:`strptime` function, the ``%p`` directive only affects |
| the output hour field if the ``%I`` directive is used to parse the hour. |
| |
| (2) |
| The range really is ``0`` to ``61``; this accounts for leap seconds and the |
| (very rare) double leap seconds. |
| |
| (3) |
| When used with the :func:`strptime` function, ``%U`` and ``%W`` are only used in |
| calculations when the day of the week and the year are specified. |
| |
| Here is an example, a format for dates compatible with that specified in the |
| :rfc:`2822` Internet email standard. [#]_ :: |
| |
| >>> from time import gmtime, strftime |
| >>> strftime("%a, %d %b %Y %H:%M:%S +0000", gmtime()) |
| 'Thu, 28 Jun 2001 14:17:15 +0000' |
| |
| Additional directives may be supported on certain platforms, but only the ones |
| listed here have a meaning standardized by ANSI C. |
| |
| On some platforms, an optional field width and precision specification can |
| immediately follow the initial ``'%'`` of a directive in the following order; |
| this is also not portable. The field width is normally 2 except for ``%j`` where |
| it is 3. |
| |
| |
| .. function:: strptime(string[, format]) |
| |
| Parse a string representing a time according to a format. The return value |
| is a :class:`struct_time` as returned by :func:`gmtime` or |
| :func:`localtime`. |
| |
| The *format* parameter uses the same directives as those used by |
| :func:`strftime`; it defaults to ``"%a %b %d %H:%M:%S %Y"`` which matches the |
| formatting returned by :func:`ctime`. If *string* cannot be parsed according |
| to *format*, or if it has excess data after parsing, :exc:`ValueError` is |
| raised. The default values used to fill in any missing data when more |
| accurate values cannot be inferred are ``(1900, 1, 1, 0, 0, 0, 0, 1, -1)``. |
| Both *string* and *format* must be strings. |
| |
| For example: |
| |
| >>> import time |
| >>> time.strptime("30 Nov 00", "%d %b %y") # doctest: +NORMALIZE_WHITESPACE |
| time.struct_time(tm_year=2000, tm_mon=11, tm_mday=30, tm_hour=0, tm_min=0, |
| tm_sec=0, tm_wday=3, tm_yday=335, tm_isdst=-1) |
| |
| Support for the ``%Z`` directive is based on the values contained in ``tzname`` |
| and whether ``daylight`` is true. Because of this, it is platform-specific |
| except for recognizing UTC and GMT which are always known (and are considered to |
| be non-daylight savings timezones). |
| |
| Only the directives specified in the documentation are supported. Because |
| ``strftime()`` is implemented per platform it can sometimes offer more |
| directives than those listed. But ``strptime()`` is independent of any platform |
| and thus does not necessarily support all directives available that are not |
| documented as supported. |
| |
| |
| .. data:: struct_time |
| |
| The type of the time value sequence returned by :func:`gmtime`, |
| :func:`localtime`, and :func:`strptime`. |
| |
| |
| .. function:: time() |
| |
| Return the time as a floating point number expressed in seconds since the epoch, |
| in UTC. Note that even though the time is always returned as a floating point |
| number, not all systems provide time with a better precision than 1 second. |
| While this function normally returns non-decreasing values, it can return a |
| lower value than a previous call if the system clock has been set back between |
| the two calls. |
| |
| |
| .. data:: timezone |
| |
| The offset of the local (non-DST) timezone, in seconds west of UTC (negative in |
| most of Western Europe, positive in the US, zero in the UK). |
| |
| |
| .. data:: tzname |
| |
| A tuple of two strings: the first is the name of the local non-DST timezone, the |
| second is the name of the local DST timezone. If no DST timezone is defined, |
| the second string should not be used. |
| |
| |
| .. function:: tzset() |
| |
| Resets the time conversion rules used by the library routines. The environment |
| variable :envvar:`TZ` specifies how this is done. |
| |
| Availability: Unix. |
| |
| .. note:: |
| |
| Although in many cases, changing the :envvar:`TZ` environment variable may |
| affect the output of functions like :func:`localtime` without calling |
| :func:`tzset`, this behavior should not be relied on. |
| |
| The :envvar:`TZ` environment variable should contain no whitespace. |
| |
| The standard format of the :envvar:`TZ` environment variable is (whitespace |
| added for clarity):: |
| |
| std offset [dst [offset [,start[/time], end[/time]]]] |
| |
| Where the components are: |
| |
| ``std`` and ``dst`` |
| Three or more alphanumerics giving the timezone abbreviations. These will be |
| propagated into time.tzname |
| |
| ``offset`` |
| The offset has the form: ``± hh[:mm[:ss]]``. This indicates the value |
| added the local time to arrive at UTC. If preceded by a '-', the timezone |
| is east of the Prime Meridian; otherwise, it is west. If no offset follows |
| dst, summer time is assumed to be one hour ahead of standard time. |
| |
| ``start[/time], end[/time]`` |
| Indicates when to change to and back from DST. The format of the |
| start and end dates are one of the following: |
| |
| :samp:`J{n}` |
| The Julian day *n* (1 <= *n* <= 365). Leap days are not counted, so in |
| all years February 28 is day 59 and March 1 is day 60. |
| |
| :samp:`{n}` |
| The zero-based Julian day (0 <= *n* <= 365). Leap days are counted, and |
| it is possible to refer to February 29. |
| |
| :samp:`M{m}.{n}.{d}` |
| The *d*'th day (0 <= *d* <= 6) or week *n* of month *m* of the year (1 |
| <= *n* <= 5, 1 <= *m* <= 12, where week 5 means "the last *d* day in |
| month *m*" which may occur in either the fourth or the fifth |
| week). Week 1 is the first week in which the *d*'th day occurs. Day |
| zero is Sunday. |
| |
| ``time`` has the same format as ``offset`` except that no leading sign |
| ('-' or '+') is allowed. The default, if time is not given, is 02:00:00. |
| |
| :: |
| |
| >>> os.environ['TZ'] = 'EST+05EDT,M4.1.0,M10.5.0' |
| >>> time.tzset() |
| >>> time.strftime('%X %x %Z') |
| '02:07:36 05/08/03 EDT' |
| >>> os.environ['TZ'] = 'AEST-10AEDT-11,M10.5.0,M3.5.0' |
| >>> time.tzset() |
| >>> time.strftime('%X %x %Z') |
| '16:08:12 05/08/03 AEST' |
| |
| On many Unix systems (including \*BSD, Linux, Solaris, and Darwin), it is more |
| convenient to use the system's zoneinfo (:manpage:`tzfile(5)`) database to |
| specify the timezone rules. To do this, set the :envvar:`TZ` environment |
| variable to the path of the required timezone datafile, relative to the root of |
| the systems 'zoneinfo' timezone database, usually located at |
| :file:`/usr/share/zoneinfo`. For example, ``'US/Eastern'``, |
| ``'Australia/Melbourne'``, ``'Egypt'`` or ``'Europe/Amsterdam'``. :: |
| |
| >>> os.environ['TZ'] = 'US/Eastern' |
| >>> time.tzset() |
| >>> time.tzname |
| ('EST', 'EDT') |
| >>> os.environ['TZ'] = 'Egypt' |
| >>> time.tzset() |
| >>> time.tzname |
| ('EET', 'EEST') |
| |
| |
| .. seealso:: |
| |
| Module :mod:`datetime` |
| More object-oriented interface to dates and times. |
| |
| Module :mod:`locale` |
| Internationalization services. The locale settings can affect the return values |
| for some of the functions in the :mod:`time` module. |
| |
| Module :mod:`calendar` |
| General calendar-related functions. :func:`timegm` is the inverse of |
| :func:`gmtime` from this module. |
| |
| .. rubric:: Footnotes |
| |
| .. [#] The use of ``%Z`` is now deprecated, but the ``%z`` escape that expands to the |
| preferred hour/minute offset is not supported by all ANSI C libraries. Also, a |
| strict reading of the original 1982 :rfc:`822` standard calls for a two-digit |
| year (%y rather than %Y), but practice moved to 4-digit years long before the |
| year 2000. The 4-digit year has been mandated by :rfc:`2822`, which obsoletes |
| :rfc:`822`. |
| |