Doc/library/multiprocessing.rst

:mod:`multiprocessing` --- Process-based parallelism
====================================================

.. module:: multiprocessing
   :synopsis: Process-based parallelism.


Introduction
------------

:mod:`multiprocessing` is a package that supports spawning processes using an
API similar to the :mod:`threading` module.  The :mod:`multiprocessing` package
offers both local and remote concurrency, effectively side-stepping the
:term:`Global Interpreter Lock` by using subprocesses instead of threads.  Due
to this, the :mod:`multiprocessing` module allows the programmer to fully
leverage multiple processors on a given machine.  It runs on both Unix and
Windows.

.. note::

    Some of this package's functionality requires a functioning shared semaphore
    implementation on the host operating system. Without one, the
    :mod:`multiprocessing.synchronize` module will be disabled, and attempts to
    import it will result in an :exc:`ImportError`. See
    :issue:`3770` for additional information.

.. note::

    Functionality within this package requires that the ``__main__`` module be
    importable by the children. This is covered in :ref:`multiprocessing-programming`
    however it is worth pointing out here. This means that some examples, such
    as the :class:`multiprocessing.pool.Pool` examples will not work in the
    interactive interpreter. For example::

        >>> from multiprocessing import Pool
        >>> p = Pool(5)
        >>> def f(x):
        ...     return x*x
        ...
        >>> p.map(f, [1,2,3])
        Process PoolWorker-1:
        Process PoolWorker-2:
        Process PoolWorker-3:
        Traceback (most recent call last):
        Traceback (most recent call last):
        Traceback (most recent call last):
        AttributeError: 'module' object has no attribute 'f'
        AttributeError: 'module' object has no attribute 'f'
        AttributeError: 'module' object has no attribute 'f'

    (If you try this it will actually output three full tracebacks
    interleaved in a semi-random fashion, and then you may have to
    stop the master process somehow.)


The :class:`Process` class
~~~~~~~~~~~~~~~~~~~~~~~~~~

In :mod:`multiprocessing`, processes are spawned by creating a :class:`Process`
object and then calling its :meth:`~Process.start` method.  :class:`Process`
follows the API of :class:`threading.Thread`.  A trivial example of a
multiprocess program is ::

   from multiprocessing import Process

   def f(name):
       print('hello', name)

   if __name__ == '__main__':
       p = Process(target=f, args=('bob',))
       p.start()
       p.join()

To show the individual process IDs involved, here is an expanded example::

    from multiprocessing import Process
    import os

    def info(title):
        print(title)
        print('module name:', __name__)
        if hasattr(os, 'getppid'):  # only available on Unix
            print('parent process:', os.getppid())
        print('process id:', os.getpid())

    def f(name):
        info('function f')
        print('hello', name)

    if __name__ == '__main__':
        info('main line')
        p = Process(target=f, args=('bob',))
        p.start()
        p.join()

For an explanation of why the ``if __name__ == '__main__'`` part is
necessary, see :ref:`multiprocessing-programming`.



Contexts and start methods
~~~~~~~~~~~~~~~~~~~~~~~~~~

Depending on the platform, :mod:`multiprocessing` supports three ways
to start a process.  These *start methods* are

  *spawn*
    The parent process starts a fresh python interpreter process.  The
    child process will only inherit those resources necessary to run
    the process objects :meth:`~Process.run` method.  In particular,
    unnecessary file descriptors and handles from the parent process
    will not be inherited.  Starting a process using this method is
    rather slow compared to using *fork* or *forkserver*.

    Available on Unix and Windows.  The default on Windows.

  *fork*
    The parent process uses :func:`os.fork` to fork the Python
    interpreter.  The child process, when it begins, is effectively
    identical to the parent process.  All resources of the parent are
    inherited by the child process.  Note that safely forking a
    multithreaded process is problematic.

    Available on Unix only.  The default on Unix.

  *forkserver*
    When the program starts and selects the *forkserver* start method,
    a server process is started.  From then on, whenever a new process
    is needed, the parent process connects to the server and requests
    that it fork a new process.  The fork server process is single
    threaded so it is safe for it to use :func:`os.fork`.  No
    unnecessary resources are inherited.

    Available on Unix platforms which support passing file descriptors
    over Unix pipes.

Before Python 3.4 *fork* was the only option available on Unix.  Also,
prior to Python 3.4, child processes would inherit all the parents
inheritable handles on Windows.

On Unix using the *spawn* or *forkserver* start methods will also
start a *semaphore tracker* process which tracks the unlinked named
semaphores created by processes of the program.  When all processes
have exited the semaphore tracker unlinks any remaining semaphores.
Usually there should be none, but if a process was killed by a signal
there may some "leaked" semaphores.  (Unlinking the named semaphores
is a serious matter since the system allows only a limited number, and
they will not be automatically unlinked until the next reboot.)

To select the a start method you use the :func:`set_start_method` in
the ``if __name__ == '__main__'`` clause of the main module.  For
example::

       import multiprocessing as mp

       def foo(q):
           q.put('hello')

       if __name__ == '__main__':
           mp.set_start_method('spawn')
           q = mp.Queue()
           p = mp.Process(target=foo, args=(q,))
           p.start()
           print(q.get())
           p.join()

:func:`set_start_method` should not be used more than once in the
program.

Alternatively, you can use :func:`get_context` to obtain a context
object.  Context objects have the same API as the multiprocessing
module, and allow one to use multiple start methods in the same
program. ::

       import multiprocessing as mp

       def foo(q):
           q.put('hello')

       if __name__ == '__main__':
           ctx = mp.get_context('spawn')
           q = ctx.Queue()
           p = ctx.Process(target=foo, args=(q,))
           p.start()
           print(q.get())
           p.join()

Note that objects related to one context may not be compatible with
processes for a different context.  In particular, locks created using
the *fork* context cannot be passed to a processes started using the
*spawn* or *forkserver* start methods.

A library which wants to use a particular start method should probably
use :func:`get_context` to avoid interfering with the choice of the
library user.


Exchanging objects between processes
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

:mod:`multiprocessing` supports two types of communication channel between
processes:

**Queues**

   The :class:`Queue` class is a near clone of :class:`queue.Queue`.  For
   example::

      from multiprocessing import Process, Queue

      def f(q):
          q.put([42, None, 'hello'])

      if __name__ == '__main__':
          q = Queue()
          p = Process(target=f, args=(q,))
          p.start()
          print(q.get())    # prints "[42, None, 'hello']"
          p.join()

   Queues are thread and process safe.

**Pipes**

   The :func:`Pipe` function returns a pair of connection objects connected by a
   pipe which by default is duplex (two-way).  For example::

      from multiprocessing import Process, Pipe

      def f(conn):
          conn.send([42, None, 'hello'])
          conn.close()

      if __name__ == '__main__':
          parent_conn, child_conn = Pipe()
          p = Process(target=f, args=(child_conn,))
          p.start()
          print(parent_conn.recv())   # prints "[42, None, 'hello']"
          p.join()

   The two connection objects returned by :func:`Pipe` represent the two ends of
   the pipe.  Each connection object has :meth:`~Connection.send` and
   :meth:`~Connection.recv` methods (among others).  Note that data in a pipe
   may become corrupted if two processes (or threads) try to read from or write
   to the *same* end of the pipe at the same time.  Of course there is no risk
   of corruption from processes using different ends of the pipe at the same
   time.


Synchronization between processes
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

:mod:`multiprocessing` contains equivalents of all the synchronization
primitives from :mod:`threading`.  For instance one can use a lock to ensure
that only one process prints to standard output at a time::

   from multiprocessing import Process, Lock

   def f(l, i):
       l.acquire()
       print('hello world', i)
       l.release()

   if __name__ == '__main__':
       lock = Lock()

       for num in range(10):
           Process(target=f, args=(lock, num)).start()

Without using the lock output from the different processes is liable to get all
mixed up.


Sharing state between processes
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

As mentioned above, when doing concurrent programming it is usually best to
avoid using shared state as far as possible.  This is particularly true when
using multiple processes.

However, if you really do need to use some shared data then
:mod:`multiprocessing` provides a couple of ways of doing so.

**Shared memory**

   Data can be stored in a shared memory map using :class:`Value` or
   :class:`Array`.  For example, the following code ::

      from multiprocessing import Process, Value, Array

      def f(n, a):
          n.value = 3.1415927
          for i in range(len(a)):
              a[i] = -a[i]

      if __name__ == '__main__':
          num = Value('d', 0.0)
          arr = Array('i', range(10))

          p = Process(target=f, args=(num, arr))
          p.start()
          p.join()

          print(num.value)
          print(arr[:])

   will print ::

      3.1415927
      [0, -1, -2, -3, -4, -5, -6, -7, -8, -9]

   The ``'d'`` and ``'i'`` arguments used when creating ``num`` and ``arr`` are
   typecodes of the kind used by the :mod:`array` module: ``'d'`` indicates a
   double precision float and ``'i'`` indicates a signed integer.  These shared
   objects will be process and thread-safe.

   For more flexibility in using shared memory one can use the
   :mod:`multiprocessing.sharedctypes` module which supports the creation of
   arbitrary ctypes objects allocated from shared memory.

**Server process**

   A manager object returned by :func:`Manager` controls a server process which
   holds Python objects and allows other processes to manipulate them using
   proxies.

   A manager returned by :func:`Manager` will support types
   :class:`list`, :class:`dict`, :class:`Namespace`, :class:`Lock`,
   :class:`RLock`, :class:`Semaphore`, :class:`BoundedSemaphore`,
   :class:`Condition`, :class:`Event`, :class:`Barrier`,
   :class:`Queue`, :class:`Value` and :class:`Array`.  For example, ::

      from multiprocessing import Process, Manager

      def f(d, l):
          d[1] = '1'
          d['2'] = 2
          d[0.25] = None
          l.reverse()

      if __name__ == '__main__':
          with Manager() as manager:
              d = manager.dict()
              l = manager.list(range(10))

              p = Process(target=f, args=(d, l))
              p.start()
              p.join()

              print(d)
              print(l)

   will print ::

       {0.25: None, 1: '1', '2': 2}
       [9, 8, 7, 6, 5, 4, 3, 2, 1, 0]

   Server process managers are more flexible than using shared memory objects
   because they can be made to support arbitrary object types.  Also, a single
   manager can be shared by processes on different computers over a network.
   They are, however, slower than using shared memory.


Using a pool of workers
~~~~~~~~~~~~~~~~~~~~~~~

The :class:`~multiprocessing.pool.Pool` class represents a pool of worker
processes.  It has methods which allows tasks to be offloaded to the worker
processes in a few different ways.

For example::

   from multiprocessing import Pool
   from time import sleep

   def f(x):
       return x*x

   if __name__ == '__main__':
       # start 4 worker processes
       with Pool(processes=4) as pool:

           # print "[0, 1, 4,..., 81]"
           print(pool.map(f, range(10)))

           # print same numbers in arbitrary order
           for i in pool.imap_unordered(f, range(10)):
               print(i)

           # evaluate "f(10)" asynchronously
           res = pool.apply_async(f, [10])
           print(res.get(timeout=1))             # prints "100"

           # make worker sleep for 10 secs
           res = pool.apply_async(sleep, 10)
           print(res.get(timeout=1))             # raises multiprocessing.TimeoutError

       # exiting the 'with'-block has stopped the pool

Note that the methods of a pool should only ever be used by the
process which created it.


Reference
---------

The :mod:`multiprocessing` package mostly replicates the API of the
:mod:`threading` module.


:class:`Process` and exceptions
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

.. class:: Process(group=None, target=None, name=None, args=(), kwargs={}, \
                   *, daemon=None)

   Process objects represent activity that is run in a separate process. The
   :class:`Process` class has equivalents of all the methods of
   :class:`threading.Thread`.

   The constructor should always be called with keyword arguments. *group*
   should always be ``None``; it exists solely for compatibility with
   :class:`threading.Thread`.  *target* is the callable object to be invoked by
   the :meth:`run()` method.  It defaults to ``None``, meaning nothing is
   called. *name* is the process name (see :attr:`name` for more details).
   *args* is the argument tuple for the target invocation.  *kwargs* is a
   dictionary of keyword arguments for the target invocation.  If provided,
   the keyword-only *daemon* argument sets the process :attr:`daemon` flag
   to ``True`` or ``False``.  If ``None`` (the default), this flag will be
   inherited from the creating process.

   By default, no arguments are passed to *target*.

   If a subclass overrides the constructor, it must make sure it invokes the
   base class constructor (:meth:`Process.__init__`) before doing anything else
   to the process.

   .. versionchanged:: 3.3
      Added the *daemon* argument.

   .. method:: run()

      Method representing the process's activity.

      You may override this method in a subclass.  The standard :meth:`run`
      method invokes the callable object passed to the object's constructor as
      the target argument, if any, with sequential and keyword arguments taken
      from the *args* and *kwargs* arguments, respectively.

   .. method:: start()

      Start the process's activity.

      This must be called at most once per process object.  It arranges for the
      object's :meth:`run` method to be invoked in a separate process.

   .. method:: join([timeout])

      If the optional argument *timeout* is ``None`` (the default), the method
      blocks until the process whose :meth:`join` method is called terminates.
      If *timeout* is a positive number, it blocks at most *timeout* seconds.

      A process can be joined many times.

      A process cannot join itself because this would cause a deadlock.  It is
      an error to attempt to join a process before it has been started.

   .. attribute:: name

      The process's name.  The name is a string used for identification purposes
      only.  It has no semantics.  Multiple processes may be given the same
      name.

      The initial name is set by the constructor.  If no explicit name is
      provided to the constructor, a name of the form
      'Process-N\ :sub:`1`:N\ :sub:`2`:...:N\ :sub:`k`' is constructed, where
      each N\ :sub:`k` is the N-th child of its parent.

   .. method:: is_alive

      Return whether the process is alive.

      Roughly, a process object is alive from the moment the :meth:`start`
      method returns until the child process terminates.

   .. attribute:: daemon

      The process's daemon flag, a Boolean value.  This must be set before
      :meth:`start` is called.

      The initial value is inherited from the creating process.

      When a process exits, it attempts to terminate all of its daemonic child
      processes.

      Note that a daemonic process is not allowed to create child processes.
      Otherwise a daemonic process would leave its children orphaned if it gets
      terminated when its parent process exits. Additionally, these are **not**
      Unix daemons or services, they are normal processes that will be
      terminated (and not joined) if non-daemonic processes have exited.

   In addition to the  :class:`threading.Thread` API, :class:`Process` objects
   also support the following attributes and methods:

   .. attribute:: pid

      Return the process ID.  Before the process is spawned, this will be
      ``None``.

   .. attribute:: exitcode

      The child's exit code.  This will be ``None`` if the process has not yet
      terminated.  A negative value *-N* indicates that the child was terminated
      by signal *N*.

   .. attribute:: authkey

      The process's authentication key (a byte string).

      When :mod:`multiprocessing` is initialized the main process is assigned a
      random string using :func:`os.urandom`.

      When a :class:`Process` object is created, it will inherit the
      authentication key of its parent process, although this may be changed by
      setting :attr:`authkey` to another byte string.

      See :ref:`multiprocessing-auth-keys`.

   .. attribute:: sentinel

      A numeric handle of a system object which will become "ready" when
      the process ends.

      You can use this value if you want to wait on several events at
      once using :func:`multiprocessing.connection.wait`.  Otherwise
      calling :meth:`join()` is simpler.

      On Windows, this is an OS handle usable with the ``WaitForSingleObject``
      and ``WaitForMultipleObjects`` family of API calls.  On Unix, this is
      a file descriptor usable with primitives from the :mod:`select` module.

      .. versionadded:: 3.3

   .. method:: terminate()

      Terminate the process.  On Unix this is done using the ``SIGTERM`` signal;
      on Windows :c:func:`TerminateProcess` is used.  Note that exit handlers and
      finally clauses, etc., will not be executed.

      Note that descendant processes of the process will *not* be terminated --
      they will simply become orphaned.

      .. warning::

         If this method is used when the associated process is using a pipe or
         queue then the pipe or queue is liable to become corrupted and may
         become unusable by other process.  Similarly, if the process has
         acquired a lock or semaphore etc. then terminating it is liable to
         cause other processes to deadlock.

   Note that the :meth:`start`, :meth:`join`, :meth:`is_alive`,
   :meth:`terminate` and :attr:`exitcode` methods should only be called by
   the process that created the process object.

   Example usage of some of the methods of :class:`Process`:

   .. doctest::

       >>> import multiprocessing, time, signal
       >>> p = multiprocessing.Process(target=time.sleep, args=(1000,))
       >>> print(p, p.is_alive())
       <Process(Process-1, initial)> False
       >>> p.start()
       >>> print(p, p.is_alive())
       <Process(Process-1, started)> True
       >>> p.terminate()
       >>> time.sleep(0.1)
       >>> print(p, p.is_alive())
       <Process(Process-1, stopped[SIGTERM])> False
       >>> p.exitcode == -signal.SIGTERM
       True

.. exception:: ProcessError

   The base class of all :mod:`multiprocessing` exceptions.

.. exception:: BufferTooShort

   Exception raised by :meth:`Connection.recv_bytes_into()` when the supplied
   buffer object is too small for the message read.

   If ``e`` is an instance of :exc:`BufferTooShort` then ``e.args[0]`` will give
   the message as a byte string.

.. exception:: AuthenticationError

   Raised when there is an authentication error.

.. exception:: TimeoutError

   Raised by methods with a timeout when the timeout expires.

Pipes and Queues
~~~~~~~~~~~~~~~~

When using multiple processes, one generally uses message passing for
communication between processes and avoids having to use any synchronization
primitives like locks.

For passing messages one can use :func:`Pipe` (for a connection between two
processes) or a queue (which allows multiple producers and consumers).

The :class:`Queue`, :class:`SimpleQueue` and :class:`JoinableQueue` types are multi-producer,
multi-consumer FIFO queues modelled on the :class:`queue.Queue` class in the
standard library.  They differ in that :class:`Queue` lacks the
:meth:`~queue.Queue.task_done` and :meth:`~queue.Queue.join` methods introduced
into Python 2.5's :class:`queue.Queue` class.

If you use :class:`JoinableQueue` then you **must** call
:meth:`JoinableQueue.task_done` for each task removed from the queue or else the
semaphore used to count the number of unfinished tasks may eventually overflow,
raising an exception.

Note that one can also create a shared queue by using a manager object -- see
:ref:`multiprocessing-managers`.

.. note::

   :mod:`multiprocessing` uses the usual :exc:`queue.Empty` and
   :exc:`queue.Full` exceptions to signal a timeout.  They are not available in
   the :mod:`multiprocessing` namespace so you need to import them from
   :mod:`queue`.

.. note::

   When an object is put on a queue, the object is pickled and a
   background thread later flushes the pickled data to an underlying
   pipe.  This has some consequences which are a little surprising,
   but should not cause any practical difficulties -- if they really
   bother you then you can instead use a queue created with a
   :ref:`manager <multiprocessing-managers>`.

   (1) After putting an object on an empty queue there may be an
       infinitesimal delay before the queue's :meth:`~Queue.empty`
       method returns :const:`False` and :meth:`~Queue.get_nowait` can
       return without raising :exc:`queue.Empty`.

   (2) If multiple processes are enqueuing objects, it is possible for
       the objects to be received at the other end out-of-order.
       However, objects enqueued by the same process will always be in
       the expected order with respect to each other.

.. warning::

   If a process is killed using :meth:`Process.terminate` or :func:`os.kill`
   while it is trying to use a :class:`Queue`, then the data in the queue is
   likely to become corrupted.  This may cause any other process to get an
   exception when it tries to use the queue later on.

.. warning::

   As mentioned above, if a child process has put items on a queue (and it has
   not used :meth:`JoinableQueue.cancel_join_thread
   <multiprocessing.Queue.cancel_join_thread>`), then that process will
   not terminate until all buffered items have been flushed to the pipe.

   This means that if you try joining that process you may get a deadlock unless
   you are sure that all items which have been put on the queue have been
   consumed.  Similarly, if the child process is non-daemonic then the parent
   process may hang on exit when it tries to join all its non-daemonic children.

   Note that a queue created using a manager does not have this issue.  See
   :ref:`multiprocessing-programming`.

For an example of the usage of queues for interprocess communication see
:ref:`multiprocessing-examples`.


.. function:: Pipe([duplex])

   Returns a pair ``(conn1, conn2)`` of :class:`Connection` objects representing
   the ends of a pipe.

   If *duplex* is ``True`` (the default) then the pipe is bidirectional.  If
   *duplex* is ``False`` then the pipe is unidirectional: ``conn1`` can only be
   used for receiving messages and ``conn2`` can only be used for sending
   messages.


.. class:: Queue([maxsize])

   Returns a process shared queue implemented using a pipe and a few
   locks/semaphores.  When a process first puts an item on the queue a feeder
   thread is started which transfers objects from a buffer into the pipe.

   The usual :exc:`queue.Empty` and :exc:`queue.Full` exceptions from the
   standard library's :mod:`queue` module are raised to signal timeouts.

   :class:`Queue` implements all the methods of :class:`queue.Queue` except for
   :meth:`~queue.Queue.task_done` and :meth:`~queue.Queue.join`.

   .. method:: qsize()

      Return the approximate size of the queue.  Because of
      multithreading/multiprocessing semantics, this number is not reliable.

      Note that this may raise :exc:`NotImplementedError` on Unix platforms like
      Mac OS X where ``sem_getvalue()`` is not implemented.

   .. method:: empty()

      Return ``True`` if the queue is empty, ``False`` otherwise.  Because of
      multithreading/multiprocessing semantics, this is not reliable.

   .. method:: full()

      Return ``True`` if the queue is full, ``False`` otherwise.  Because of
      multithreading/multiprocessing semantics, this is not reliable.

   .. method:: put(obj[, block[, timeout]])

      Put obj into the queue.  If the optional argument *block* is ``True``
      (the default) and *timeout* is ``None`` (the default), block if necessary until
      a free slot is available.  If *timeout* is a positive number, it blocks at
      most *timeout* seconds and raises the :exc:`queue.Full` exception if no
      free slot was available within that time.  Otherwise (*block* is
      ``False``), put an item on the queue if a free slot is immediately
      available, else raise the :exc:`queue.Full` exception (*timeout* is
      ignored in that case).

   .. method:: put_nowait(obj)

      Equivalent to ``put(obj, False)``.

   .. method:: get([block[, timeout]])

      Remove and return an item from the queue.  If optional args *block* is
      ``True`` (the default) and *timeout* is ``None`` (the default), block if
      necessary until an item is available.  If *timeout* is a positive number,
      it blocks at most *timeout* seconds and raises the :exc:`queue.Empty`
      exception if no item was available within that time.  Otherwise (block is
      ``False``), return an item if one is immediately available, else raise the
      :exc:`queue.Empty` exception (*timeout* is ignored in that case).

   .. method:: get_nowait()

      Equivalent to ``get(False)``.

   :class:`multiprocessing.Queue` has a few additional methods not found in
   :class:`queue.Queue`.  These methods are usually unnecessary for most
   code:

   .. method:: close()

      Indicate that no more data will be put on this queue by the current
      process.  The background thread will quit once it has flushed all buffered
      data to the pipe.  This is called automatically when the queue is garbage
      collected.

   .. method:: join_thread()

      Join the background thread.  This can only be used after :meth:`close` has
      been called.  It blocks until the background thread exits, ensuring that
      all data in the buffer has been flushed to the pipe.

      By default if a process is not the creator of the queue then on exit it
      will attempt to join the queue's background thread.  The process can call
      :meth:`cancel_join_thread` to make :meth:`join_thread` do nothing.

   .. method:: cancel_join_thread()

      Prevent :meth:`join_thread` from blocking.  In particular, this prevents
      the background thread from being joined automatically when the process
      exits -- see :meth:`join_thread`.

      A better name for this method might be
      ``allow_exit_without_flush()``.  It is likely to cause enqueued
      data to lost, and you almost certainly will not need to use it.
      It is really only there if you need the current process to exit
      immediately without waiting to flush enqueued data to the
      underlying pipe, and you don't care about lost data.


.. class:: SimpleQueue()

   It is a simplified :class:`Queue` type, very close to a locked :class:`Pipe`.

   .. method:: empty()

      Return ``True`` if the queue is empty, ``False`` otherwise.

   .. method:: get()

      Remove and return an item from the queue.

   .. method:: put(item)

      Put *item* into the queue.


.. class:: JoinableQueue([maxsize])

   :class:`JoinableQueue`, a :class:`Queue` subclass, is a queue which
   additionally has :meth:`task_done` and :meth:`join` methods.

   .. method:: task_done()

      Indicate that a formerly enqueued task is complete. Used by queue
      consumers.  For each :meth:`~Queue.get` used to fetch a task, a subsequent
      call to :meth:`task_done` tells the queue that the processing on the task
      is complete.

      If a :meth:`~queue.Queue.join` is currently blocking, it will resume when all
      items have been processed (meaning that a :meth:`task_done` call was
      received for every item that had been :meth:`~Queue.put` into the queue).

      Raises a :exc:`ValueError` if called more times than there were items
      placed in the queue.


   .. method:: join()

      Block until all items in the queue have been gotten and processed.

      The count of unfinished tasks goes up whenever an item is added to the
      queue.  The count goes down whenever a consumer calls
      :meth:`task_done` to indicate that the item was retrieved and all work on
      it is complete.  When the count of unfinished tasks drops to zero,
      :meth:`~queue.Queue.join` unblocks.


Miscellaneous
~~~~~~~~~~~~~

.. function:: active_children()

   Return list of all live children of the current process.

   Calling this has the side affect of "joining" any processes which have
   already finished.

.. function:: cpu_count()

   Return the number of CPUs in the system.  May raise
   :exc:`NotImplementedError`.

   .. seealso::
      :func:`os.cpu_count`

.. function:: current_process()

   Return the :class:`Process` object corresponding to the current process.

   An analogue of :func:`threading.current_thread`.

.. function:: freeze_support()

   Add support for when a program which uses :mod:`multiprocessing` has been
   frozen to produce a Windows executable.  (Has been tested with **py2exe**,
   **PyInstaller** and **cx_Freeze**.)

   One needs to call this function straight after the ``if __name__ ==
   '__main__'`` line of the main module.  For example::

      from multiprocessing import Process, freeze_support

      def f():
          print('hello world!')

      if __name__ == '__main__':
          freeze_support()
          Process(target=f).start()

   If the ``freeze_support()`` line is omitted then trying to run the frozen
   executable will raise :exc:`RuntimeError`.

   If the module is being run normally by the Python interpreter then
   :func:`freeze_support` has no effect.

.. function:: get_all_start_methods()

   Returns a list of the supported start methods, the first of which
   is the default.  The possible start methods are ``'fork'``,
   ``'spawn'`` and ``'forkserver'``.  On Windows only ``'spawn'`` is
   available.  On Unix ``'fork'`` and ``'spawn'`` are always
   supported, with ``'fork'`` being the default.

   .. versionadded:: 3.4

.. function:: get_context(method=None)

   Return a context object which has the same attributes as the
   :mod:`multiprocessing` module.

   If *method* is *None* then the default context is returned.
   Otherwise *method* should be ``'fork'``, ``'spawn'``,
   ``'forkserver'``.  :exc:`ValueError` is raised if the specified
   start method is not available.

   .. versionadded:: 3.4

.. function:: get_start_method(allow_none=False)

   Return the name of start method used for starting processes.

   If the start method has not been fixed and *allow_none* is false,
   then the start method is fixed to the default and the name is
   returned.  If the start method has not been fixed and *allow_none*
   is true then *None* is returned.

   The return value can be ``'fork'``, ``'spawn'``, ``'forkserver'``
   or *None*.  ``'fork'`` is the default on Unix, while ``'spawn'`` is
   the default on Windows.

   .. versionadded:: 3.4

.. function:: set_executable()

   Sets the path of the Python interpreter to use when starting a child process.
   (By default :data:`sys.executable` is used).  Embedders will probably need to
   do some thing like ::

      set_executable(os.path.join(sys.exec_prefix, 'pythonw.exe'))

   before they can create child processes.

   .. versionchanged:: 3.4
      Now supported on Unix when the ``'spawn'`` start method is used.

.. function:: set_start_method(method)

   Set the method which should be used to start child processes.
   *method* can be ``'fork'``, ``'spawn'`` or ``'forkserver'``.

   Note that this should be called at most once, and it should be
   protected inside the ``if __name__ == '__main__'`` clause of the
   main module.

   .. versionadded:: 3.4

.. note::

   :mod:`multiprocessing` contains no analogues of
   :func:`threading.active_count`, :func:`threading.enumerate`,
   :func:`threading.settrace`, :func:`threading.setprofile`,
   :class:`threading.Timer`, or :class:`threading.local`.


Connection Objects
~~~~~~~~~~~~~~~~~~

Connection objects allow the sending and receiving of picklable objects or
strings.  They can be thought of as message oriented connected sockets.

Connection objects are usually created using :func:`Pipe` -- see also
:ref:`multiprocessing-listeners-clients`.

.. class:: Connection

   .. method:: send(obj)

      Send an object to the other end of the connection which should be read
      using :meth:`recv`.

      The object must be picklable.  Very large pickles (approximately 32 MB+,
      though it depends on the OS) may raise a ValueError exception.

   .. method:: recv()

      Return an object sent from the other end of the connection using
      :meth:`send`.  Blocks until there its something to receive.  Raises
      :exc:`EOFError` if there is nothing left to receive
      and the other end was closed.

   .. method:: fileno()

      Return the file descriptor or handle used by the connection.

   .. method:: close()

      Close the connection.

      This is called automatically when the connection is garbage collected.

   .. method:: poll([timeout])

      Return whether there is any data available to be read.

      If *timeout* is not specified then it will return immediately.  If
      *timeout* is a number then this specifies the maximum time in seconds to
      block.  If *timeout* is ``None`` then an infinite timeout is used.

      Note that multiple connection objects may be polled at once by
      using :func:`multiprocessing.connection.wait`.

   .. method:: send_bytes(buffer[, offset[, size]])

      Send byte data from a :term:`bytes-like object` as a complete message.

      If *offset* is given then data is read from that position in *buffer*.  If
      *size* is given then that many bytes will be read from buffer.  Very large
      buffers (approximately 32 MB+, though it depends on the OS) may raise a
      :exc:`ValueError` exception

   .. method:: recv_bytes([maxlength])

      Return a complete message of byte data sent from the other end of the
      connection as a string.  Blocks until there is something to receive.
      Raises :exc:`EOFError` if there is nothing left
      to receive and the other end has closed.

      If *maxlength* is specified and the message is longer than *maxlength*
      then :exc:`OSError` is raised and the connection will no longer be
      readable.

      .. versionchanged:: 3.3
         This function used to raise a :exc:`IOError`, which is now an
         alias of :exc:`OSError`.


   .. method:: recv_bytes_into(buffer[, offset])

      Read into *buffer* a complete message of byte data sent from the other end
      of the connection and return the number of bytes in the message.  Blocks
      until there is something to receive.  Raises
      :exc:`EOFError` if there is nothing left to receive and the other end was
      closed.

      *buffer* must be a writable :term:`bytes-like object`.  If
      *offset* is given then the message will be written into the buffer from
      that position.  Offset must be a non-negative integer less than the
      length of *buffer* (in bytes).

      If the buffer is too short then a :exc:`BufferTooShort` exception is
      raised and the complete message is available as ``e.args[0]`` where ``e``
      is the exception instance.

   .. versionchanged:: 3.3
      Connection objects themselves can now be transferred between processes
      using :meth:`Connection.send` and :meth:`Connection.recv`.

   .. versionadded:: 3.3
      Connection objects now support the context manager protocol -- see
      :ref:`typecontextmanager`.  :meth:`~contextmanager.__enter__` returns the
      connection object, and :meth:`~contextmanager.__exit__` calls :meth:`close`.

For example:

.. doctest::

    >>> from multiprocessing import Pipe
    >>> a, b = Pipe()
    >>> a.send([1, 'hello', None])
    >>> b.recv()
    [1, 'hello', None]
    >>> b.send_bytes(b'thank you')
    >>> a.recv_bytes()
    b'thank you'
    >>> import array
    >>> arr1 = array.array('i', range(5))
    >>> arr2 = array.array('i', [0] * 10)
    >>> a.send_bytes(arr1)
    >>> count = b.recv_bytes_into(arr2)
    >>> assert count == len(arr1) * arr1.itemsize
    >>> arr2
    array('i', [0, 1, 2, 3, 4, 0, 0, 0, 0, 0])


.. warning::

    The :meth:`Connection.recv` method automatically unpickles the data it
    receives, which can be a security risk unless you can trust the process
    which sent the message.

    Therefore, unless the connection object was produced using :func:`Pipe` you
    should only use the :meth:`~Connection.recv` and :meth:`~Connection.send`
    methods after performing some sort of authentication.  See
    :ref:`multiprocessing-auth-keys`.

.. warning::

    If a process is killed while it is trying to read or write to a pipe then
    the data in the pipe is likely to become corrupted, because it may become
    impossible to be sure where the message boundaries lie.


Synchronization primitives
~~~~~~~~~~~~~~~~~~~~~~~~~~

Generally synchronization primitives are not as necessary in a multiprocess
program as they are in a multithreaded program.  See the documentation for
:mod:`threading` module.

Note that one can also create synchronization primitives by using a manager
object -- see :ref:`multiprocessing-managers`.

.. class:: Barrier(parties[, action[, timeout]])

   A barrier object: a clone of :class:`threading.Barrier`.

   .. versionadded:: 3.3

.. class:: BoundedSemaphore([value])

   A bounded semaphore object: a clone of :class:`threading.BoundedSemaphore`.

   (On Mac OS X, this is indistinguishable from :class:`Semaphore` because
   ``sem_getvalue()`` is not implemented on that platform).

.. class:: Condition([lock])

   A condition variable: an alias for :class:`threading.Condition`.

   If *lock* is specified then it should be a :class:`Lock` or :class:`RLock`
   object from :mod:`multiprocessing`.

   .. versionchanged:: 3.3
      The :meth:`~threading.Condition.wait_for` method was added.

.. class:: Event()

   A clone of :class:`threading.Event`.

.. class:: Lock()

   A non-recursive lock object: a clone of :class:`threading.Lock`.

.. class:: RLock()

   A recursive lock object: a clone of :class:`threading.RLock`.

.. class:: Semaphore([value])

   A semaphore object: a clone of :class:`threading.Semaphore`.

.. note::

   The :meth:`acquire` and :meth:`wait` methods of each of these types
   treat negative timeouts as zero timeouts.  This differs from
   :mod:`threading` where, since version 3.2, the equivalent
   :meth:`acquire` methods treat negative timeouts as infinite
   timeouts.

   On Mac OS X, ``sem_timedwait`` is unsupported, so calling ``acquire()`` with
   a timeout will emulate that function's behavior using a sleeping loop.

.. note::

   If the SIGINT signal generated by Ctrl-C arrives while the main thread is
   blocked by a call to :meth:`BoundedSemaphore.acquire`, :meth:`Lock.acquire`,
   :meth:`RLock.acquire`, :meth:`Semaphore.acquire`, :meth:`Condition.acquire`
   or :meth:`Condition.wait` then the call will be immediately interrupted and
   :exc:`KeyboardInterrupt` will be raised.

   This differs from the behaviour of :mod:`threading` where SIGINT will be
   ignored while the equivalent blocking calls are in progress.


Shared :mod:`ctypes` Objects
~~~~~~~~~~~~~~~~~~~~~~~~~~~~

It is possible to create shared objects using shared memory which can be
inherited by child processes.

.. function:: Value(typecode_or_type, *args, lock=True)

   Return a :mod:`ctypes` object allocated from shared memory.  By default the
   return value is actually a synchronized wrapper for the object.  The object
   itself can be accessed via the *value* attribute of a :class:`Value`.

   *typecode_or_type* determines the type of the returned object: it is either a
   ctypes type or a one character typecode of the kind used by the :mod:`array`
   module.  *\*args* is passed on to the constructor for the type.

   If *lock* is ``True`` (the default) then a new lock object is created to
   synchronize access to the value.  If *lock* is a :class:`Lock` or
   :class:`RLock` object then that will be used to synchronize access to the
   value.  If *lock* is ``False`` then access to the returned object will not be
   automatically protected by a lock, so it will not necessarily be
   "process-safe".

   Note that *lock* is a keyword-only argument.

.. function:: Array(typecode_or_type, size_or_initializer, *, lock=True)

   Return a ctypes array allocated from shared memory.  By default the return
   value is actually a synchronized wrapper for the array.

   *typecode_or_type* determines the type of the elements of the returned array:
   it is either a ctypes type or a one character typecode of the kind used by
   the :mod:`array` module.  If *size_or_initializer* is an integer, then it
   determines the length of the array, and the array will be initially zeroed.
   Otherwise, *size_or_initializer* is a sequence which is used to initialize
   the array and whose length determines the length of the array.

   If *lock* is ``True`` (the default) then a new lock object is created to
   synchronize access to the value.  If *lock* is a :class:`Lock` or
   :class:`RLock` object then that will be used to synchronize access to the
   value.  If *lock* is ``False`` then access to the returned object will not be
   automatically protected by a lock, so it will not necessarily be
   "process-safe".

   Note that *lock* is a keyword only argument.

   Note that an array of :data:`ctypes.c_char` has *value* and *raw*
   attributes which allow one to use it to store and retrieve strings.


The :mod:`multiprocessing.sharedctypes` module
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

.. module:: multiprocessing.sharedctypes
   :synopsis: Allocate ctypes objects from shared memory.

The :mod:`multiprocessing.sharedctypes` module provides functions for allocating
:mod:`ctypes` objects from shared memory which can be inherited by child
processes.

.. note::

   Although it is possible to store a pointer in shared memory remember that
   this will refer to a location in the address space of a specific process.
   However, the pointer is quite likely to be invalid in the context of a second
   process and trying to dereference the pointer from the second process may
   cause a crash.

.. function:: RawArray(typecode_or_type, size_or_initializer)

   Return a ctypes array allocated from shared memory.

   *typecode_or_type* determines the type of the elements of the returned array:
   it is either a ctypes type or a one character typecode of the kind used by
   the :mod:`array` module.  If *size_or_initializer* is an integer then it
   determines the length of the array, and the array will be initially zeroed.
   Otherwise *size_or_initializer* is a sequence which is used to initialize the
   array and whose length determines the length of the array.

   Note that setting and getting an element is potentially non-atomic -- use
   :func:`Array` instead to make sure that access is automatically synchronized
   using a lock.

.. function:: RawValue(typecode_or_type, *args)

   Return a ctypes object allocated from shared memory.

   *typecode_or_type* determines the type of the returned object: it is either a
   ctypes type or a one character typecode of the kind used by the :mod:`array`
   module.  *\*args* is passed on to the constructor for the type.

   Note that setting and getting the value is potentially non-atomic -- use
   :func:`Value` instead to make sure that access is automatically synchronized
   using a lock.

   Note that an array of :data:`ctypes.c_char` has ``value`` and ``raw``
   attributes which allow one to use it to store and retrieve strings -- see
   documentation for :mod:`ctypes`.

.. function:: Array(typecode_or_type, size_or_initializer, *, lock=True)

   The same as :func:`RawArray` except that depending on the value of *lock* a
   process-safe synchronization wrapper may be returned instead of a raw ctypes
   array.

   If *lock* is ``True`` (the default) then a new lock object is created to
   synchronize access to the value.  If *lock* is a
   :class:`~multiprocessing.Lock` or :class:`~multiprocessing.RLock` object
   then that will be used to synchronize access to the
   value.  If *lock* is ``False`` then access to the returned object will not be
   automatically protected by a lock, so it will not necessarily be
   "process-safe".

   Note that *lock* is a keyword-only argument.

.. function:: Value(typecode_or_type, *args, lock=True)

   The same as :func:`RawValue` except that depending on the value of *lock* a
   process-safe synchronization wrapper may be returned instead of a raw ctypes
   object.

   If *lock* is ``True`` (the default) then a new lock object is created to
   synchronize access to the value.  If *lock* is a :class:`~multiprocessing.Lock` or
   :class:`~multiprocessing.RLock` object then that will be used to synchronize access to the
   value.  If *lock* is ``False`` then access to the returned object will not be
   automatically protected by a lock, so it will not necessarily be
   "process-safe".

   Note that *lock* is a keyword-only argument.

.. function:: copy(obj)

   Return a ctypes object allocated from shared memory which is a copy of the
   ctypes object *obj*.

.. function:: synchronized(obj[, lock])

   Return a process-safe wrapper object for a ctypes object which uses *lock* to
   synchronize access.  If *lock* is ``None`` (the default) then a
   :class:`multiprocessing.RLock` object is created automatically.

   A synchronized wrapper will have two methods in addition to those of the
   object it wraps: :meth:`get_obj` returns the wrapped object and
   :meth:`get_lock` returns the lock object used for synchronization.

   Note that accessing the ctypes object through the wrapper can be a lot slower
   than accessing the raw ctypes object.


The table below compares the syntax for creating shared ctypes objects from
shared memory with the normal ctypes syntax.  (In the table ``MyStruct`` is some
subclass of :class:`ctypes.Structure`.)

==================== ========================== ===========================
ctypes               sharedctypes using type    sharedctypes using typecode
==================== ========================== ===========================
c_double(2.4)        RawValue(c_double, 2.4)    RawValue('d', 2.4)
MyStruct(4, 6)       RawValue(MyStruct, 4, 6)
(c_short * 7)()      RawArray(c_short, 7)       RawArray('h', 7)
(c_int * 3)(9, 2, 8) RawArray(c_int, (9, 2, 8)) RawArray('i', (9, 2, 8))
==================== ========================== ===========================


Below is an example where a number of ctypes objects are modified by a child
process::

   from multiprocessing import Process, Lock
   from multiprocessing.sharedctypes import Value, Array
   from ctypes import Structure, c_double

   class Point(Structure):
       _fields_ = [('x', c_double), ('y', c_double)]

   def modify(n, x, s, A):
       n.value **= 2
       x.value **= 2
       s.value = s.value.upper()
       for a in A:
           a.x **= 2
           a.y **= 2

   if __name__ == '__main__':
       lock = Lock()

       n = Value('i', 7)
       x = Value(c_double, 1.0/3.0, lock=False)
       s = Array('c', b'hello world', lock=lock)
       A = Array(Point, [(1.875,-6.25), (-5.75,2.0), (2.375,9.5)], lock=lock)

       p = Process(target=modify, args=(n, x, s, A))
       p.start()
       p.join()

       print(n.value)
       print(x.value)
       print(s.value)
       print([(a.x, a.y) for a in A])


.. highlight:: none

The results printed are ::

    49
    0.1111111111111111
    HELLO WORLD
    [(3.515625, 39.0625), (33.0625, 4.0), (5.640625, 90.25)]

.. highlight:: python3


.. _multiprocessing-managers:

Managers
~~~~~~~~

Managers provide a way to create data which can be shared between different
processes, including sharing over a network between processes running on
different machines. A manager object controls a server process which manages
*shared objects*.  Other processes can access the shared objects by using
proxies.

.. function:: multiprocessing.Manager()

   Returns a started :class:`~multiprocessing.managers.SyncManager` object which
   can be used for sharing objects between processes.  The returned manager
   object corresponds to a spawned child process and has methods which will
   create shared objects and return corresponding proxies.

.. module:: multiprocessing.managers
   :synopsis: Share data between process with shared objects.

Manager processes will be shutdown as soon as they are garbage collected or
their parent process exits.  The manager classes are defined in the
:mod:`multiprocessing.managers` module:

.. class:: BaseManager([address[, authkey]])

   Create a BaseManager object.

   Once created one should call :meth:`start` or ``get_server().serve_forever()`` to ensure
   that the manager object refers to a started manager process.

   *address* is the address on which the manager process listens for new
   connections.  If *address* is ``None`` then an arbitrary one is chosen.

   *authkey* is the authentication key which will be used to check the
   validity of incoming connections to the server process.  If
   *authkey* is ``None`` then ``current_process().authkey`` is used.
   Otherwise *authkey* is used and it must be a byte string.

   .. method:: start([initializer[, initargs]])

      Start a subprocess to start the manager.  If *initializer* is not ``None``
      then the subprocess will call ``initializer(*initargs)`` when it starts.

   .. method:: get_server()

      Returns a :class:`Server` object which represents the actual server under
      the control of the Manager. The :class:`Server` object supports the
      :meth:`serve_forever` method::

      >>> from multiprocessing.managers import BaseManager
      >>> manager = BaseManager(address=('', 50000), authkey=b'abc')
      >>> server = manager.get_server()
      >>> server.serve_forever()

      :class:`Server` additionally has an :attr:`address` attribute.

   .. method:: connect()

      Connect a local manager object to a remote manager process::

      >>> from multiprocessing.managers import BaseManager
      >>> m = BaseManager(address=('127.0.0.1', 5000), authkey=b'abc')
      >>> m.connect()

   .. method:: shutdown()

      Stop the process used by the manager.  This is only available if
      :meth:`start` has been used to start the server process.

      This can be called multiple times.

   .. method:: register(typeid[, callable[, proxytype[, exposed[, method_to_typeid[, create_method]]]]])

      A classmethod which can be used for registering a type or callable with
      the manager class.

      *typeid* is a "type identifier" which is used to identify a particular
      type of shared object.  This must be a string.

      *callable* is a callable used for creating objects for this type
      identifier.  If a manager instance will be connected to the
      server using the :meth:`connect` method, or if the
      *create_method* argument is ``False`` then this can be left as
      ``None``.

      *proxytype* is a subclass of :class:`BaseProxy` which is used to create
      proxies for shared objects with this *typeid*.  If ``None`` then a proxy
      class is created automatically.

      *exposed* is used to specify a sequence of method names which proxies for
      this typeid should be allowed to access using
      :meth:`BaseProxy._callMethod`.  (If *exposed* is ``None`` then
      :attr:`proxytype._exposed_` is used instead if it exists.)  In the case
      where no exposed list is specified, all "public methods" of the shared
      object will be accessible.  (Here a "public method" means any attribute
      which has a :meth:`~object.__call__` method and whose name does not begin
      with ``'_'``.)

      *method_to_typeid* is a mapping used to specify the return type of those
      exposed methods which should return a proxy.  It maps method names to
      typeid strings.  (If *method_to_typeid* is ``None`` then
      :attr:`proxytype._method_to_typeid_` is used instead if it exists.)  If a
      method's name is not a key of this mapping or if the mapping is ``None``
      then the object returned by the method will be copied by value.

      *create_method* determines whether a method should be created with name
      *typeid* which can be used to tell the server process to create a new
      shared object and return a proxy for it.  By default it is ``True``.

   :class:`BaseManager` instances also have one read-only property:

   .. attribute:: address

      The address used by the manager.

   .. versionchanged:: 3.3
      Manager objects support the context manager protocol -- see
      :ref:`typecontextmanager`.  :meth:`~contextmanager.__enter__` starts the
      server process (if it has not already started) and then returns the
      manager object.  :meth:`~contextmanager.__exit__` calls :meth:`shutdown`.

      In previous versions :meth:`~contextmanager.__enter__` did not start the
      manager's server process if it was not already started.

.. class:: SyncManager

   A subclass of :class:`BaseManager` which can be used for the synchronization
   of processes.  Objects of this type are returned by
   :func:`multiprocessing.Manager`.

   It also supports creation of shared lists and dictionaries.

   .. method:: Barrier(parties[, action[, timeout]])

      Create a shared :class:`threading.Barrier` object and return a
      proxy for it.

      .. versionadded:: 3.3

   .. method:: BoundedSemaphore([value])

      Create a shared :class:`threading.BoundedSemaphore` object and return a
      proxy for it.

   .. method:: Condition([lock])

      Create a shared :class:`threading.Condition` object and return a proxy for
      it.

      If *lock* is supplied then it should be a proxy for a
      :class:`threading.Lock` or :class:`threading.RLock` object.

      .. versionchanged:: 3.3
         The :meth:`~threading.Condition.wait_for` method was added.

   .. method:: Event()

      Create a shared :class:`threading.Event` object and return a proxy for it.

   .. method:: Lock()

      Create a shared :class:`threading.Lock` object and return a proxy for it.

   .. method:: Namespace()

      Create a shared :class:`Namespace` object and return a proxy for it.

   .. method:: Queue([maxsize])

      Create a shared :class:`queue.Queue` object and return a proxy for it.

   .. method:: RLock()

      Create a shared :class:`threading.RLock` object and return a proxy for it.

   .. method:: Semaphore([value])

      Create a shared :class:`threading.Semaphore` object and return a proxy for
      it.

   .. method:: Array(typecode, sequence)

      Create an array and return a proxy for it.

   .. method:: Value(typecode, value)

      Create an object with a writable ``value`` attribute and return a proxy
      for it.

   .. method:: dict()
               dict(mapping)
               dict(sequence)

      Create a shared ``dict`` object and return a proxy for it.

   .. method:: list()
               list(sequence)

      Create a shared ``list`` object and return a proxy for it.

   .. note::

      Modifications to mutable values or items in dict and list proxies will not
      be propagated through the manager, because the proxy has no way of knowing
      when its values or items are modified.  To modify such an item, you can
      re-assign the modified object to the container proxy::

         # create a list proxy and append a mutable object (a dictionary)
         lproxy = manager.list()
         lproxy.append({})
         # now mutate the dictionary
         d = lproxy[0]
         d['a'] = 1
         d['b'] = 2
         # at this point, the changes to d are not yet synced, but by
         # reassigning the dictionary, the proxy is notified of the change
         lproxy[0] = d


Namespace objects
>>>>>>>>>>>>>>>>>

A namespace object has no public methods, but does have writable attributes.
Its representation shows the values of its attributes.

However, when using a proxy for a namespace object, an attribute beginning with
``'_'`` will be an attribute of the proxy and not an attribute of the referent:

.. doctest::

   >>> manager = multiprocessing.Manager()
   >>> Global = manager.Namespace()
   >>> Global.x = 10
   >>> Global.y = 'hello'
   >>> Global._z = 12.3    # this is an attribute of the proxy
   >>> print(Global)
   Namespace(x=10, y='hello')


Customized managers
>>>>>>>>>>>>>>>>>>>

To create one's own manager, one creates a subclass of :class:`BaseManager` and
uses the :meth:`~BaseManager.register` classmethod to register new types or
callables with the manager class.  For example::

   from multiprocessing.managers import BaseManager

   class MathsClass:
       def add(self, x, y):
           return x + y
       def mul(self, x, y):
           return x * y

   class MyManager(BaseManager):
       pass

   MyManager.register('Maths', MathsClass)

   if __name__ == '__main__':
       with MyManager() as manager:
           maths = manager.Maths()
           print(maths.add(4, 3))         # prints 7
           print(maths.mul(7, 8))         # prints 56


Using a remote manager
>>>>>>>>>>>>>>>>>>>>>>

It is possible to run a manager server on one machine and have clients use it
from other machines (assuming that the firewalls involved allow it).

Running the following commands creates a server for a single shared queue which
remote clients can access::

   >>> from multiprocessing.managers import BaseManager
   >>> import queue
   >>> queue = queue.Queue()
   >>> class QueueManager(BaseManager): pass
   >>> QueueManager.register('get_queue', callable=lambda:queue)
   >>> m = QueueManager(address=('', 50000), authkey=b'abracadabra')
   >>> s = m.get_server()
   >>> s.serve_forever()

One client can access the server as follows::

   >>> from multiprocessing.managers import BaseManager
   >>> class QueueManager(BaseManager): pass
   >>> QueueManager.register('get_queue')
   >>> m = QueueManager(address=('foo.bar.org', 50000), authkey=b'abracadabra')
   >>> m.connect()
   >>> queue = m.get_queue()
   >>> queue.put('hello')

Another client can also use it::

   >>> from multiprocessing.managers import BaseManager
   >>> class QueueManager(BaseManager): pass
   >>> QueueManager.register('get_queue')
   >>> m = QueueManager(address=('foo.bar.org', 50000), authkey=b'abracadabra')
   >>> m.connect()
   >>> queue = m.get_queue()
   >>> queue.get()
   'hello'

Local processes can also access that queue, using the code from above on the
client to access it remotely::

    >>> from multiprocessing import Process, Queue
    >>> from multiprocessing.managers import BaseManager
    >>> class Worker(Process):
    ...     def __init__(self, q):
    ...         self.q = q
    ...         super(Worker, self).__init__()
    ...     def run(self):
    ...         self.q.put('local hello')
    ...
    >>> queue = Queue()
    >>> w = Worker(queue)
    >>> w.start()
    >>> class QueueManager(BaseManager): pass
    ...
    >>> QueueManager.register('get_queue', callable=lambda: queue)
    >>> m = QueueManager(address=('', 50000), authkey=b'abracadabra')
    >>> s = m.get_server()
    >>> s.serve_forever()

Proxy Objects
~~~~~~~~~~~~~

A proxy is an object which *refers* to a shared object which lives (presumably)
in a different process.  The shared object is said to be the *referent* of the
proxy.  Multiple proxy objects may have the same referent.

A proxy object has methods which invoke corresponding methods of its referent
(although not every method of the referent will necessarily be available through
the proxy).  A proxy can usually be used in most of the same ways that its
referent can:

.. doctest::

   >>> from multiprocessing import Manager
   >>> manager = Manager()
   >>> l = manager.list([i*i for i in range(10)])
   >>> print(l)
   [0, 1, 4, 9, 16, 25, 36, 49, 64, 81]
   >>> print(repr(l))
   <ListProxy object, typeid 'list' at 0x...>
   >>> l[4]
   16
   >>> l[2:5]
   [4, 9, 16]

Notice that applying :func:`str` to a proxy will return the representation of
the referent, whereas applying :func:`repr` will return the representation of
the proxy.

An important feature of proxy objects is that they are picklable so they can be
passed between processes.  Note, however, that if a proxy is sent to the
corresponding manager's process then unpickling it will produce the referent
itself.  This means, for example, that one shared object can contain a second:

.. doctest::

   >>> a = manager.list()
   >>> b = manager.list()
   >>> a.append(b)         # referent of a now contains referent of b
   >>> print(a, b)
   [[]] []
   >>> b.append('hello')
   >>> print(a, b)
   [['hello']] ['hello']

.. note::

   The proxy types in :mod:`multiprocessing` do nothing to support comparisons
   by value.  So, for instance, we have:

   .. doctest::

       >>> manager.list([1,2,3]) == [1,2,3]
       False

   One should just use a copy of the referent instead when making comparisons.

.. class:: BaseProxy

   Proxy objects are instances of subclasses of :class:`BaseProxy`.

   .. method:: _callmethod(methodname[, args[, kwds]])

      Call and return the result of a method of the proxy's referent.

      If ``proxy`` is a proxy whose referent is ``obj`` then the expression ::

         proxy._callmethod(methodname, args, kwds)

      will evaluate the expression ::

         getattr(obj, methodname)(*args, **kwds)

      in the manager's process.

      The returned value will be a copy of the result of the call or a proxy to
      a new shared object -- see documentation for the *method_to_typeid*
      argument of :meth:`BaseManager.register`.

      If an exception is raised by the call, then is re-raised by
      :meth:`_callmethod`.  If some other exception is raised in the manager's
      process then this is converted into a :exc:`RemoteError` exception and is
      raised by :meth:`_callmethod`.

      Note in particular that an exception will be raised if *methodname* has
      not been *exposed*

      An example of the usage of :meth:`_callmethod`:

      .. doctest::

         >>> l = manager.list(range(10))
         >>> l._callmethod('__len__')
         10
         >>> l._callmethod('__getslice__', (2, 7))   # equiv to `l[2:7]`
         [2, 3, 4, 5, 6]
         >>> l._callmethod('__getitem__', (20,))     # equiv to `l[20]`
         Traceback (most recent call last):
         ...
         IndexError: list index out of range

   .. method:: _getvalue()

      Return a copy of the referent.

      If the referent is unpicklable then this will raise an exception.

   .. method:: __repr__

      Return a representation of the proxy object.

   .. method:: __str__

      Return the representation of the referent.


Cleanup
>>>>>>>

A proxy object uses a weakref callback so that when it gets garbage collected it
deregisters itself from the manager which owns its referent.

A shared object gets deleted from the manager process when there are no longer
any proxies referring to it.


Process Pools
~~~~~~~~~~~~~

.. module:: multiprocessing.pool
   :synopsis: Create pools of processes.

One can create a pool of processes which will carry out tasks submitted to it
with the :class:`Pool` class.

.. class:: Pool([processes[, initializer[, initargs[, maxtasksperchild [, context]]]]])

   A process pool object which controls a pool of worker processes to which jobs
   can be submitted.  It supports asynchronous results with timeouts and
   callbacks and has a parallel map implementation.

   *processes* is the number of worker processes to use.  If *processes* is
   ``None`` then the number returned by :func:`os.cpu_count` is used.  If
   *initializer* is not ``None`` then each worker process will call
   ``initializer(*initargs)`` when it starts.

   Note that the methods of the pool object should only be called by
   the process which created the pool.

   .. versionadded:: 3.2
      *maxtasksperchild* is the number of tasks a worker process can complete
      before it will exit and be replaced with a fresh worker process, to enable
      unused resources to be freed. The default *maxtasksperchild* is None, which
      means worker processes will live as long as the pool.

   .. versionadded:: 3.4
      *context* can be used to specify the context used for starting
      the worker processes.  Usually a pool is created using the
      function :func:`multiprocessing.Pool` or the :meth:`Pool` method
      of a context object.  In both cases *context* is set
      appropriately.

   .. note::

      Worker processes within a :class:`Pool` typically live for the complete
      duration of the Pool's work queue. A frequent pattern found in other
      systems (such as Apache, mod_wsgi, etc) to free resources held by
      workers is to allow a worker within a pool to complete only a set
      amount of work before being exiting, being cleaned up and a new
      process spawned to replace the old one. The *maxtasksperchild*
      argument to the :class:`Pool` exposes this ability to the end user.

   .. method:: apply(func[, args[, kwds]])

      Call *func* with arguments *args* and keyword arguments *kwds*.  It blocks
      until the result is ready. Given this blocks, :meth:`apply_async` is
      better suited for performing work in parallel. Additionally, *func*
      is only executed in one of the workers of the pool.

   .. method:: apply_async(func[, args[, kwds[, callback[, error_callback]]]])

      A variant of the :meth:`apply` method which returns a result object.

      If *callback* is specified then it should be a callable which accepts a
      single argument.  When the result becomes ready *callback* is applied to
      it, that is unless the call failed, in which case the *error_callback*
      is applied instead

      If *error_callback* is specified then it should be a callable which
      accepts a single argument.  If the target function fails, then
      the *error_callback* is called with the exception instance.

      Callbacks should complete immediately since otherwise the thread which
      handles the results will get blocked.

   .. method:: map(func, iterable[, chunksize])

      A parallel equivalent of the :func:`map` built-in function (it supports only
      one *iterable* argument though).  It blocks until the result is ready.

      This method chops the iterable into a number of chunks which it submits to
      the process pool as separate tasks.  The (approximate) size of these
      chunks can be specified by setting *chunksize* to a positive integer.

   .. method:: map_async(func, iterable[, chunksize[, callback[, error_callback]]])

      A variant of the :meth:`.map` method which returns a result object.

      If *callback* is specified then it should be a callable which accepts a
      single argument.  When the result becomes ready *callback* is applied to
      it, that is unless the call failed, in which case the *error_callback*
      is applied instead

      If *error_callback* is specified then it should be a callable which
      accepts a single argument.  If the target function fails, then
      the *error_callback* is called with the exception instance.

      Callbacks should complete immediately since otherwise the thread which
      handles the results will get blocked.

   .. method:: imap(func, iterable[, chunksize])

      A lazier version of :meth:`map`.

      The *chunksize* argument is the same as the one used by the :meth:`.map`
      method.  For very long iterables using a large value for *chunksize* can
      make the job complete **much** faster than using the default value of
      ``1``.

      Also if *chunksize* is ``1`` then the :meth:`!next` method of the iterator
      returned by the :meth:`imap` method has an optional *timeout* parameter:
      ``next(timeout)`` will raise :exc:`multiprocessing.TimeoutError` if the
      result cannot be returned within *timeout* seconds.

   .. method:: imap_unordered(func, iterable[, chunksize])

      The same as :meth:`imap` except that the ordering of the results from the
      returned iterator should be considered arbitrary.  (Only when there is
      only one worker process is the order guaranteed to be "correct".)

   .. method:: starmap(func, iterable[, chunksize])

      Like :meth:`map` except that the elements of the `iterable` are expected
      to be iterables that are unpacked as arguments.

      Hence an `iterable` of `[(1,2), (3, 4)]` results in `[func(1,2),
      func(3,4)]`.

      .. versionadded:: 3.3

   .. method:: starmap_async(func, iterable[, chunksize[, callback[, error_back]]])

      A combination of :meth:`starmap` and :meth:`map_async` that iterates over
      `iterable` of iterables and calls `func` with the iterables unpacked.
      Returns a result object.

      .. versionadded:: 3.3

   .. method:: close()

      Prevents any more tasks from being submitted to the pool.  Once all the
      tasks have been completed the worker processes will exit.

   .. method:: terminate()

      Stops the worker processes immediately without completing outstanding
      work.  When the pool object is garbage collected :meth:`terminate` will be
      called immediately.

   .. method:: join()

      Wait for the worker processes to exit.  One must call :meth:`close` or
      :meth:`terminate` before using :meth:`join`.

   .. versionadded:: 3.3
      Pool objects now support the context manager protocol -- see
      :ref:`typecontextmanager`.  :meth:`~contextmanager.__enter__` returns the
      pool object, and :meth:`~contextmanager.__exit__` calls :meth:`terminate`.


.. class:: AsyncResult

   The class of the result returned by :meth:`Pool.apply_async` and
   :meth:`Pool.map_async`.

   .. method:: get([timeout])

      Return the result when it arrives.  If *timeout* is not ``None`` and the
      result does not arrive within *timeout* seconds then
      :exc:`multiprocessing.TimeoutError` is raised.  If the remote call raised
      an exception then that exception will be reraised by :meth:`get`.

   .. method:: wait([timeout])

      Wait until the result is available or until *timeout* seconds pass.

   .. method:: ready()

      Return whether the call has completed.

   .. method:: successful()

      Return whether the call completed without raising an exception.  Will
      raise :exc:`AssertionError` if the result is not ready.

The following example demonstrates the use of a pool::

   from multiprocessing import Pool

   def f(x):
       return x*x

   if __name__ == '__main__':
       with Pool(processes=4) as pool:         # start 4 worker processes
           result = pool.apply_async(f, (10,)) # evaluate "f(10)" asynchronously
           print(result.get(timeout=1))        # prints "100" unless your computer is *very* slow

           print(pool.map(f, range(10)))       # prints "[0, 1, 4,..., 81]"

           it = pool.imap(f, range(10))
           print(next(it))                     # prints "0"
           print(next(it))                     # prints "1"
           print(it.next(timeout=1))           # prints "4" unless your computer is *very* slow

           import time
           result = pool.apply_async(time.sleep, (10,))
           print(result.get(timeout=1))        # raises TimeoutError


.. _multiprocessing-listeners-clients:

Listeners and Clients
~~~~~~~~~~~~~~~~~~~~~

.. module:: multiprocessing.connection
   :synopsis: API for dealing with sockets.

Usually message passing between processes is done using queues or by using
:class:`~multiprocessing.Connection` objects returned by
:func:`~multiprocessing.Pipe`.

However, the :mod:`multiprocessing.connection` module allows some extra
flexibility.  It basically gives a high level message oriented API for dealing
with sockets or Windows named pipes.  It also has support for *digest
authentication* using the :mod:`hmac` module, and for polling
multiple connections at the same time.


.. function:: deliver_challenge(connection, authkey)

   Send a randomly generated message to the other end of the connection and wait
   for a reply.

   If the reply matches the digest of the message using *authkey* as the key
   then a welcome message is sent to the other end of the connection.  Otherwise
   :exc:`~multiprocessing.AuthenticationError` is raised.

.. function:: answer_challenge(connection, authkey)

   Receive a message, calculate the digest of the message using *authkey* as the
   key, and then send the digest back.

   If a welcome message is not received, then
   :exc:`~multiprocessing.AuthenticationError` is raised.

.. function:: Client(address[, family[, authenticate[, authkey]]])

   Attempt to set up a connection to the listener which is using address
   *address*, returning a :class:`~multiprocessing.Connection`.

   The type of the connection is determined by *family* argument, but this can
   generally be omitted since it can usually be inferred from the format of
   *address*. (See :ref:`multiprocessing-address-formats`)

   If *authenticate* is ``True`` or *authkey* is a byte string then digest
   authentication is used.  The key used for authentication will be either
   *authkey* or ``current_process().authkey`` if *authkey* is ``None``.
   If authentication fails then
   :exc:`~multiprocessing.AuthenticationError` is raised.  See
   :ref:`multiprocessing-auth-keys`.

.. class:: Listener([address[, family[, backlog[, authenticate[, authkey]]]]])

   A wrapper for a bound socket or Windows named pipe which is 'listening' for
   connections.

   *address* is the address to be used by the bound socket or named pipe of the
   listener object.

   .. note::

      If an address of '0.0.0.0' is used, the address will not be a connectable
      end point on Windows. If you require a connectable end-point,
      you should use '127.0.0.1'.

   *family* is the type of socket (or named pipe) to use.  This can be one of
   the strings ``'AF_INET'`` (for a TCP socket), ``'AF_UNIX'`` (for a Unix
   domain socket) or ``'AF_PIPE'`` (for a Windows named pipe).  Of these only
   the first is guaranteed to be available.  If *family* is ``None`` then the
   family is inferred from the format of *address*.  If *address* is also
   ``None`` then a default is chosen.  This default is the family which is
   assumed to be the fastest available.  See
   :ref:`multiprocessing-address-formats`.  Note that if *family* is
   ``'AF_UNIX'`` and address is ``None`` then the socket will be created in a
   private temporary directory created using :func:`tempfile.mkstemp`.

   If the listener object uses a socket then *backlog* (1 by default) is passed
   to the :meth:`~socket.socket.listen` method of the socket once it has been
   bound.

   If *authenticate* is ``True`` (``False`` by default) or *authkey* is not
   ``None`` then digest authentication is used.

   If *authkey* is a byte string then it will be used as the
   authentication key; otherwise it must be *None*.

   If *authkey* is ``None`` and *authenticate* is ``True`` then
   ``current_process().authkey`` is used as the authentication key.  If
   *authkey* is ``None`` and *authenticate* is ``False`` then no
   authentication is done.  If authentication fails then
   :exc:`~multiprocessing.AuthenticationError` is raised.
   See :ref:`multiprocessing-auth-keys`.

   .. method:: accept()

      Accept a connection on the bound socket or named pipe of the listener
      object and return a :class:`~multiprocessing.Connection` object.  If
      authentication is attempted and fails, then
      :exc:`~multiprocessing.AuthenticationError` is raised.

   .. method:: close()

      Close the bound socket or named pipe of the listener object.  This is
      called automatically when the listener is garbage collected.  However it
      is advisable to call it explicitly.

   Listener objects have the following read-only properties:

   .. attribute:: address

      The address which is being used by the Listener object.

   .. attribute:: last_accepted

      The address from which the last accepted connection came.  If this is
      unavailable then it is ``None``.

   .. versionadded:: 3.3
      Listener objects now support the context manager protocol -- see
      :ref:`typecontextmanager`.  :meth:`~contextmanager.__enter__` returns the
      listener object, and :meth:`~contextmanager.__exit__` calls :meth:`close`.

.. function:: wait(object_list, timeout=None)

   Wait till an object in *object_list* is ready.  Returns the list of
   those objects in *object_list* which are ready.  If *timeout* is a
   float then the call blocks for at most that many seconds.  If
   *timeout* is ``None`` then it will block for an unlimited period.
   A negative timeout is equivalent to a zero timeout.

   For both Unix and Windows, an object can appear in *object_list* if
   it is

   * a readable :class:`~multiprocessing.Connection` object;
   * a connected and readable :class:`socket.socket` object; or
   * the :attr:`~multiprocessing.Process.sentinel` attribute of a
     :class:`~multiprocessing.Process` object.

   A connection or socket object is ready when there is data available
   to be read from it, or the other end has been closed.

   **Unix**: ``wait(object_list, timeout)`` almost equivalent
   ``select.select(object_list, [], [], timeout)``.  The difference is
   that, if :func:`select.select` is interrupted by a signal, it can
   raise :exc:`OSError` with an error number of ``EINTR``, whereas
   :func:`wait` will not.

   **Windows**: An item in *object_list* must either be an integer
   handle which is waitable (according to the definition used by the
   documentation of the Win32 function ``WaitForMultipleObjects()``)
   or it can be an object with a :meth:`fileno` method which returns a
   socket handle or pipe handle.  (Note that pipe handles and socket
   handles are **not** waitable handles.)

   .. versionadded:: 3.3


**Examples**

The following server code creates a listener which uses ``'secret password'`` as
an authentication key.  It then waits for a connection and sends some data to
the client::

   from multiprocessing.connection import Listener
   from array import array

   address = ('localhost', 6000)     # family is deduced to be 'AF_INET'

   with Listener(address, authkey=b'secret password') as listener:
       with listener.accept() as conn:
           print('connection accepted from', listener.last_accepted)

           conn.send([2.25, None, 'junk', float])

           conn.send_bytes(b'hello')

           conn.send_bytes(array('i', [42, 1729]))

The following code connects to the server and receives some data from the
server::

   from multiprocessing.connection import Client
   from array import array

   address = ('localhost', 6000)

   with Client(address, authkey=b'secret password') as conn:
       print(conn.recv())                  # => [2.25, None, 'junk', float]

       print(conn.recv_bytes())            # => 'hello'

       arr = array('i', [0, 0, 0, 0, 0])
       print(conn.recv_bytes_into(arr))    # => 8
       print(arr)                          # => array('i', [42, 1729, 0, 0, 0])

The following code uses :func:`~multiprocessing.connection.wait` to
wait for messages from multiple processes at once::

   import time, random
   from multiprocessing import Process, Pipe, current_process
   from multiprocessing.connection import wait

   def foo(w):
       for i in range(10):
           w.send((i, current_process().name))
       w.close()

   if __name__ == '__main__':
       readers = []

       for i in range(4):
           r, w = Pipe(duplex=False)
           readers.append(r)
           p = Process(target=foo, args=(w,))
           p.start()
           # We close the writable end of the pipe now to be sure that
           # p is the only process which owns a handle for it.  This
           # ensures that when p closes its handle for the writable end,
           # wait() will promptly report the readable end as being ready.
           w.close()

       while readers:
           for r in wait(readers):
               try:
                   msg = r.recv()
               except EOFError:
                   readers.remove(r)
               else:
                   print(msg)


.. _multiprocessing-address-formats:

Address Formats
>>>>>>>>>>>>>>>

* An ``'AF_INET'`` address is a tuple of the form ``(hostname, port)`` where
  *hostname* is a string and *port* is an integer.

* An ``'AF_UNIX'`` address is a string representing a filename on the
  filesystem.

* An ``'AF_PIPE'`` address is a string of the form
   :samp:`r'\\\\.\\pipe\\{PipeName}'`.  To use :func:`Client` to connect to a named
   pipe on a remote computer called *ServerName* one should use an address of the
   form :samp:`r'\\\\{ServerName}\\pipe\\{PipeName}'` instead.

Note that any string beginning with two backslashes is assumed by default to be
an ``'AF_PIPE'`` address rather than an ``'AF_UNIX'`` address.


.. _multiprocessing-auth-keys:

Authentication keys
~~~~~~~~~~~~~~~~~~~

When one uses :meth:`Connection.recv <multiprocessing.Connection.recv>`, the
data received is automatically
unpickled.  Unfortunately unpickling data from an untrusted source is a security
risk.  Therefore :class:`Listener` and :func:`Client` use the :mod:`hmac` module
to provide digest authentication.

An authentication key is a byte string which can be thought of as a
password: once a connection is established both ends will demand proof
that the other knows the authentication key.  (Demonstrating that both
ends are using the same key does **not** involve sending the key over
the connection.)

If authentication is requested but no authentication key is specified then the
return value of ``current_process().authkey`` is used (see
:class:`~multiprocessing.Process`).  This value will automatically inherited by
any :class:`~multiprocessing.Process` object that the current process creates.
This means that (by default) all processes of a multi-process program will share
a single authentication key which can be used when setting up connections
between themselves.

Suitable authentication keys can also be generated by using :func:`os.urandom`.


Logging
~~~~~~~

Some support for logging is available.  Note, however, that the :mod:`logging`
package does not use process shared locks so it is possible (depending on the
handler type) for messages from different processes to get mixed up.

.. currentmodule:: multiprocessing
.. function:: get_logger()

   Returns the logger used by :mod:`multiprocessing`.  If necessary, a new one
   will be created.

   When first created the logger has level :data:`logging.NOTSET` and no
   default handler. Messages sent to this logger will not by default propagate
   to the root logger.

   Note that on Windows child processes will only inherit the level of the
   parent process's logger -- any other customization of the logger will not be
   inherited.

.. currentmodule:: multiprocessing
.. function:: log_to_stderr()

   This function performs a call to :func:`get_logger` but in addition to
   returning the logger created by get_logger, it adds a handler which sends
   output to :data:`sys.stderr` using format
   ``'[%(levelname)s/%(processName)s] %(message)s'``.

Below is an example session with logging turned on::

    >>> import multiprocessing, logging
    >>> logger = multiprocessing.log_to_stderr()
    >>> logger.setLevel(logging.INFO)
    >>> logger.warning('doomed')
    [WARNING/MainProcess] doomed
    >>> m = multiprocessing.Manager()
    [INFO/SyncManager-...] child process calling self.run()
    [INFO/SyncManager-...] created temp directory /.../pymp-...
    [INFO/SyncManager-...] manager serving at '/.../listener-...'
    >>> del m
    [INFO/MainProcess] sending shutdown message to manager
    [INFO/SyncManager-...] manager exiting with exitcode 0

For a full table of logging levels, see the :mod:`logging` module.


The :mod:`multiprocessing.dummy` module
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

.. module:: multiprocessing.dummy
   :synopsis: Dumb wrapper around threading.

:mod:`multiprocessing.dummy` replicates the API of :mod:`multiprocessing` but is
no more than a wrapper around the :mod:`threading` module.


.. _multiprocessing-programming:

Programming guidelines
----------------------

There are certain guidelines and idioms which should be adhered to when using
:mod:`multiprocessing`.


All start methods
~~~~~~~~~~~~~~~~~

The following applies to all start methods.

Avoid shared state

    As far as possible one should try to avoid shifting large amounts of data
    between processes.

    It is probably best to stick to using queues or pipes for communication
    between processes rather than using the lower level synchronization
    primitives.

Picklability

    Ensure that the arguments to the methods of proxies are picklable.

Thread safety of proxies

    Do not use a proxy object from more than one thread unless you protect it
    with a lock.

    (There is never a problem with different processes using the *same* proxy.)

Joining zombie processes

    On Unix when a process finishes but has not been joined it becomes a zombie.
    There should never be very many because each time a new process starts (or
    :func:`~multiprocessing.active_children` is called) all completed processes
    which have not yet been joined will be joined.  Also calling a finished
    process's :meth:`Process.is_alive <multiprocessing.Process.is_alive>` will
    join the process.  Even so it is probably good
    practice to explicitly join all the processes that you start.

Better to inherit than pickle/unpickle

    When using the *spawn* or *forkserver* start methods many types
    from :mod:`multiprocessing` need to be picklable so that child
    processes can use them.  However, one should generally avoid
    sending shared objects to other processes using pipes or queues.
    Instead you should arrange the program so that a process which
    needs access to a shared resource created elsewhere can inherit it
    from an ancestor process.

Avoid terminating processes

    Using the :meth:`Process.terminate <multiprocessing.Process.terminate>`
    method to stop a process is liable to
    cause any shared resources (such as locks, semaphores, pipes and queues)
    currently being used by the process to become broken or unavailable to other
    processes.

    Therefore it is probably best to only consider using
    :meth:`Process.terminate <multiprocessing.Process.terminate>` on processes
    which never use any shared resources.

Joining processes that use queues

    Bear in mind that a process that has put items in a queue will wait before
    terminating until all the buffered items are fed by the "feeder" thread to
    the underlying pipe.  (The child process can call the
    :meth:`Queue.cancel_join_thread <multiprocessing.Queue.cancel_join_thread>`
    method of the queue to avoid this behaviour.)

    This means that whenever you use a queue you need to make sure that all
    items which have been put on the queue will eventually be removed before the
    process is joined.  Otherwise you cannot be sure that processes which have
    put items on the queue will terminate.  Remember also that non-daemonic
    processes will be automatically be joined.

    An example which will deadlock is the following::

        from multiprocessing import Process, Queue

        def f(q):
            q.put('X' * 1000000)

        if __name__ == '__main__':
            queue = Queue()
            p = Process(target=f, args=(queue,))
            p.start()
            p.join()                    # this deadlocks
            obj = queue.get()

    A fix here would be to swap the last two lines round (or simply remove the
    ``p.join()`` line).

Explicitly pass resources to child processes

    On Unix using the *fork* start method, a child process can make
    use of a shared resource created in a parent process using a
    global resource.  However, it is better to pass the object as an
    argument to the constructor for the child process.

    Apart from making the code (potentially) compatible with Windows
    and the other start methods this also ensures that as long as the
    child process is still alive the object will not be garbage
    collected in the parent process.  This might be important if some
    resource is freed when the object is garbage collected in the
    parent process.

    So for instance ::

        from multiprocessing import Process, Lock

        def f():
            ... do something using "lock" ...

        if __name__ == '__main__':
           lock = Lock()
           for i in range(10):
                Process(target=f).start()

    should be rewritten as ::

        from multiprocessing import Process, Lock

        def f(l):
            ... do something using "l" ...

        if __name__ == '__main__':
           lock = Lock()
           for i in range(10):
                Process(target=f, args=(lock,)).start()

Beware of replacing :data:`sys.stdin` with a "file like object"

    :mod:`multiprocessing` originally unconditionally called::

        os.close(sys.stdin.fileno())

    in the :meth:`multiprocessing.Process._bootstrap` method --- this resulted
    in issues with processes-in-processes. This has been changed to::

        sys.stdin.close()
        sys.stdin = open(os.devnull)

    Which solves the fundamental issue of processes colliding with each other
    resulting in a bad file descriptor error, but introduces a potential danger
    to applications which replace :func:`sys.stdin` with a "file-like object"
    with output buffering.  This danger is that if multiple processes call
    :meth:`~io.IOBase.close()` on this file-like object, it could result in the same
    data being flushed to the object multiple times, resulting in corruption.

    If you write a file-like object and implement your own caching, you can
    make it fork-safe by storing the pid whenever you append to the cache,
    and discarding the cache when the pid changes. For example::

       @property
       def cache(self):
           pid = os.getpid()
           if pid != self._pid:
               self._pid = pid
               self._cache = []
           return self._cache

    For more information, see :issue:`5155`, :issue:`5313` and :issue:`5331`

The *spawn* and *forkserver* start methods
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

There are a few extra restriction which don't apply to the *fork*
start method.

More picklability

    Ensure that all arguments to :meth:`Process.__init__` are
    picklable.  This means, in particular, that bound or unbound
    methods cannot be used directly as the ``target`` (unless you use
    the *fork* start method) --- just define a function and use that
    instead.

    Also, if you subclass :class:`~multiprocessing.Process` then make sure that
    instances will be picklable when the :meth:`Process.start
    <multiprocessing.Process.start>` method is called.

Global variables

    Bear in mind that if code run in a child process tries to access a global
    variable, then the value it sees (if any) may not be the same as the value
    in the parent process at the time that :meth:`Process.start
    <multiprocessing.Process.start>` was called.

    However, global variables which are just module level constants cause no
    problems.

Safe importing of main module

    Make sure that the main module can be safely imported by a new Python
    interpreter without causing unintended side effects (such a starting a new
    process).

    For example, using the *spawn* or *forkserver* start method
    running the following module would fail with a
    :exc:`RuntimeError`::

        from multiprocessing import Process

        def foo():
            print('hello')

        p = Process(target=foo)
        p.start()

    Instead one should protect the "entry point" of the program by using ``if
    __name__ == '__main__':`` as follows::

       from multiprocessing import Process, freeze_support, set_start_method

       def foo():
           print('hello')

       if __name__ == '__main__':
           freeze_support()
           set_start_method('spawn')
           p = Process(target=foo)
           p.start()

    (The ``freeze_support()`` line can be omitted if the program will be run
    normally instead of frozen.)

    This allows the newly spawned Python interpreter to safely import the module
    and then run the module's ``foo()`` function.

    Similar restrictions apply if a pool or manager is created in the main
    module.


.. _multiprocessing-examples:

Examples
--------

Demonstration of how to create and use customized managers and proxies:

.. literalinclude:: ../includes/mp_newtype.py
   :language: python3


Using :class:`~multiprocessing.pool.Pool`:

.. literalinclude:: ../includes/mp_pool.py
   :language: python3


An example showing how to use queues to feed tasks to a collection of worker
processes and collect the results:

.. literalinclude:: ../includes/mp_workers.py