Lib/test/test_largefile.py

"""Test largefile support on system where this makes sense.
"""

import os
import stat
import sys
import unittest
import socket
import shutil
import threading
from test.support import TESTFN, requires, unlink, bigmemtest, find_unused_port
from test.support import SHORT_TIMEOUT
import io  # C implementation of io
import _pyio as pyio # Python implementation of io

# size of file to create (>2 GiB; 2 GiB == 2,147,483,648 bytes)
size = 2_500_000_000
TESTFN2 = TESTFN + '2'


class LargeFileTest:

    def setUp(self):
        if os.path.exists(TESTFN):
            mode = 'r+b'
        else:
            mode = 'w+b'

        with self.open(TESTFN, mode) as f:
            current_size = os.fstat(f.fileno())[stat.ST_SIZE]
            if current_size == size+1:
                return

            if current_size == 0:
                f.write(b'z')

            f.seek(0)
            f.seek(size)
            f.write(b'a')
            f.flush()
            self.assertEqual(os.fstat(f.fileno())[stat.ST_SIZE], size+1)

    @classmethod
    def tearDownClass(cls):
        with cls.open(TESTFN, 'wb'):
            pass
        if not os.stat(TESTFN)[stat.ST_SIZE] == 0:
            raise cls.failureException('File was not truncated by opening '
                                       'with mode "wb"')
        unlink(TESTFN2)


class TestFileMethods(LargeFileTest):
    """Test that each file function works as expected for large
    (i.e. > 2 GiB) files.
    """

    # _pyio.FileIO.readall() uses a temporary bytearray then casted to bytes,
    # so memuse=2 is needed
    @bigmemtest(size=size, memuse=2, dry_run=False)
    def test_large_read(self, _size):
        # bpo-24658: Test that a read greater than 2GB does not fail.
        with self.open(TESTFN, "rb") as f:
            self.assertEqual(len(f.read()), size + 1)
            self.assertEqual(f.tell(), size + 1)

    def test_osstat(self):
        self.assertEqual(os.stat(TESTFN)[stat.ST_SIZE], size+1)

    def test_seek_read(self):
        with self.open(TESTFN, 'rb') as f:
            self.assertEqual(f.tell(), 0)
            self.assertEqual(f.read(1), b'z')
            self.assertEqual(f.tell(), 1)
            f.seek(0)
            self.assertEqual(f.tell(), 0)
            f.seek(0, 0)
            self.assertEqual(f.tell(), 0)
            f.seek(42)
            self.assertEqual(f.tell(), 42)
            f.seek(42, 0)
            self.assertEqual(f.tell(), 42)
            f.seek(42, 1)
            self.assertEqual(f.tell(), 84)
            f.seek(0, 1)
            self.assertEqual(f.tell(), 84)
            f.seek(0, 2)  # seek from the end
            self.assertEqual(f.tell(), size + 1 + 0)
            f.seek(-10, 2)
            self.assertEqual(f.tell(), size + 1 - 10)
            f.seek(-size-1, 2)
            self.assertEqual(f.tell(), 0)
            f.seek(size)
            self.assertEqual(f.tell(), size)
            # the 'a' that was written at the end of file above
            self.assertEqual(f.read(1), b'a')
            f.seek(-size-1, 1)
            self.assertEqual(f.read(1), b'z')
            self.assertEqual(f.tell(), 1)

    def test_lseek(self):
        with self.open(TESTFN, 'rb') as f:
            self.assertEqual(os.lseek(f.fileno(), 0, 0), 0)
            self.assertEqual(os.lseek(f.fileno(), 42, 0), 42)
            self.assertEqual(os.lseek(f.fileno(), 42, 1), 84)
            self.assertEqual(os.lseek(f.fileno(), 0, 1), 84)
            self.assertEqual(os.lseek(f.fileno(), 0, 2), size+1+0)
            self.assertEqual(os.lseek(f.fileno(), -10, 2), size+1-10)
            self.assertEqual(os.lseek(f.fileno(), -size-1, 2), 0)
            self.assertEqual(os.lseek(f.fileno(), size, 0), size)
            # the 'a' that was written at the end of file above
            self.assertEqual(f.read(1), b'a')

    def test_truncate(self):
        with self.open(TESTFN, 'r+b') as f:
            if not hasattr(f, 'truncate'):
                raise unittest.SkipTest("open().truncate() not available "
                                        "on this system")
            f.seek(0, 2)
            # else we've lost track of the true size
            self.assertEqual(f.tell(), size+1)
            # Cut it back via seek + truncate with no argument.
            newsize = size - 10
            f.seek(newsize)
            f.truncate()
            self.assertEqual(f.tell(), newsize)  # else pointer moved
            f.seek(0, 2)
            self.assertEqual(f.tell(), newsize)  # else wasn't truncated
            # Ensure that truncate(smaller than true size) shrinks
            # the file.
            newsize -= 1
            f.seek(42)
            f.truncate(newsize)
            self.assertEqual(f.tell(), 42)
            f.seek(0, 2)
            self.assertEqual(f.tell(), newsize)
            # XXX truncate(larger than true size) is ill-defined
            # across platform; cut it waaaaay back
            f.seek(0)
            f.truncate(1)
            self.assertEqual(f.tell(), 0)       # else pointer moved
            f.seek(0)
            self.assertEqual(len(f.read()), 1)  # else wasn't truncated

    def test_seekable(self):
        # Issue #5016; seekable() can return False when the current position
        # is negative when truncated to an int.
        for pos in (2**31-1, 2**31, 2**31+1):
            with self.open(TESTFN, 'rb') as f:
                f.seek(pos)
                self.assertTrue(f.seekable())


class TestCopyfile(LargeFileTest, unittest.TestCase):
    open = staticmethod(io.open)

    def test_it(self):
        # Internally shutil.copyfile() can use "fast copy" methods like
        # os.sendfile().
        size = os.path.getsize(TESTFN)
        shutil.copyfile(TESTFN, TESTFN2)
        self.assertEqual(os.path.getsize(TESTFN2), size)
        with open(TESTFN2, 'rb') as f:
            self.assertEqual(f.read(5), b'z\x00\x00\x00\x00')
            f.seek(size - 5)
            self.assertEqual(f.read(), b'\x00\x00\x00\x00a')


@unittest.skipIf(not hasattr(os, 'sendfile'), 'sendfile not supported')
class TestSocketSendfile(LargeFileTest, unittest.TestCase):
    open = staticmethod(io.open)
    timeout = SHORT_TIMEOUT

    def setUp(self):
        super().setUp()
        self.thread = None

    def tearDown(self):
        super().tearDown()
        if self.thread is not None:
            self.thread.join(self.timeout)
            self.thread = None

    def tcp_server(self, sock):
        def run(sock):
            with sock:
                conn, _ = sock.accept()
                conn.settimeout(self.timeout)
                with conn, open(TESTFN2, 'wb') as f:
                    event.wait(self.timeout)
                    while True:
                        chunk = conn.recv(65536)
                        if not chunk:
                            return
                        f.write(chunk)

        event = threading.Event()
        sock.settimeout(self.timeout)
        self.thread = threading.Thread(target=run, args=(sock, ))
        self.thread.start()
        event.set()

    def test_it(self):
        port = find_unused_port()
        with socket.create_server(("", port)) as sock:
            self.tcp_server(sock)
            with socket.create_connection(("127.0.0.1", port)) as client:
                with open(TESTFN, 'rb') as f:
                    client.sendfile(f)
        self.tearDown()

        size = os.path.getsize(TESTFN)
        self.assertEqual(os.path.getsize(TESTFN2), size)
        with open(TESTFN2, 'rb') as f:
            self.assertEqual(f.read(5), b'z\x00\x00\x00\x00')
            f.seek(size - 5)
            self.assertEqual(f.read(), b'\x00\x00\x00\x00a')


def setUpModule():
    try:
        import signal
        # The default handler for SIGXFSZ is to abort the process.
        # By ignoring it, system calls exceeding the file size resource
        # limit will raise OSError instead of crashing the interpreter.
        signal.signal(signal.SIGXFSZ, signal.SIG_IGN)
    except (ImportError, AttributeError):
        pass

    # On Windows and Mac OSX this test consumes large resources; It
    # takes a long time to build the >2 GiB file and takes >2 GiB of disk
    # space therefore the resource must be enabled to run this test.
    # If not, nothing after this line stanza will be executed.
    if sys.platform[:3] == 'win' or sys.platform == 'darwin':
        requires('largefile',
                 'test requires %s bytes and a long time to run' % str(size))
    else:
        # Only run if the current filesystem supports large files.
        # (Skip this test on Windows, since we now always support
        # large files.)
        f = open(TESTFN, 'wb', buffering=0)
        try:
            # 2**31 == 2147483648
            f.seek(2147483649)
            # Seeking is not enough of a test: you must write and flush, too!
            f.write(b'x')
            f.flush()
        except (OSError, OverflowError):
            raise unittest.SkipTest("filesystem does not have "
                                    "largefile support")
        finally:
            f.close()
            unlink(TESTFN)


class CLargeFileTest(TestFileMethods, unittest.TestCase):
    open = staticmethod(io.open)


class PyLargeFileTest(TestFileMethods, unittest.TestCase):
    open = staticmethod(pyio.open)


def tearDownModule():
    unlink(TESTFN)
    unlink(TESTFN2)


if __name__ == '__main__':
    unittest.main()