Doc/library/asyncio-task.rst

.. currentmodule:: asyncio

Tasks and coroutines
====================

.. _coroutine:

Coroutines
----------

A coroutine is a generator that follows certain conventions.  For
documentation purposes, all coroutines should be decorated with
``@asyncio.coroutine``, but this cannot be strictly enforced.

Coroutines use the ``yield from`` syntax introduced in :pep:`380`,
instead of the original ``yield`` syntax.

The word "coroutine", like the word "generator", is used for two
different (though related) concepts:

- The function that defines a coroutine (a function definition
  decorated with ``@asyncio.coroutine``).  If disambiguation is needed
  we will call this a *coroutine function* (:func:`iscoroutinefunction`
  returns ``True``).

- The object obtained by calling a coroutine function.  This object
  represents a computation or an I/O operation (usually a combination)
  that will complete eventually.  If disambiguation is needed we will
  call it a *coroutine object* (:func:`iscoroutine` returns ``True``).

Things a coroutine can do:

- ``result = yield from future`` -- suspends the coroutine until the
  future is done, then returns the future's result, or raises an
  exception, which will be propagated.  (If the future is cancelled,
  it will raise a ``CancelledError`` exception.)  Note that tasks are
  futures, and everything said about futures also applies to tasks.

- ``result = yield from coroutine`` -- wait for another coroutine to
  produce a result (or raise an exception, which will be propagated).
  The ``coroutine`` expression must be a *call* to another coroutine.

- ``return expression`` -- produce a result to the coroutine that is
  waiting for this one using ``yield from``.

- ``raise exception`` -- raise an exception in the coroutine that is
  waiting for this one using ``yield from``.

Calling a coroutine does not start its code running -- it is just a
generator, and the coroutine object returned by the call is really a
generator object, which doesn't do anything until you iterate over it.
In the case of a coroutine object, there are two basic ways to start
it running: call ``yield from coroutine`` from another coroutine
(assuming the other coroutine is already running!), or schedule its execution
using the :func:`async` function or the :meth:`BaseEventLoop.create_task`
method.


Coroutines (and tasks) can only run when the event loop is running.

.. decorator:: coroutine

    Decorator to mark coroutines.

    If the coroutine is not yielded from before it is destroyed, an error
    message is logged. See :ref:`Detect coroutines never scheduled
    <asyncio-coroutine-not-scheduled>`.

.. note::

    In this documentation, some methods are documented as coroutines,
    even if they are plain Python functions returning a :class:`Future`.
    This is intentional to have a freedom of tweaking the implementation
    of these functions in the future. If such a function is needed to be
    used in a callback-style code, wrap its result with :func:`async`.


.. _asyncio-hello-world-coroutine:

Example: Hello World coroutine
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Example of coroutine displaying ``"Hello World"``::

    import asyncio

    @asyncio.coroutine
    def hello_world():
        print("Hello World!")

    loop = asyncio.get_event_loop()
    # Blocking call which returns when the hello_world() coroutine is done
    loop.run_until_complete(hello_world())
    loop.close()

.. seealso::

   The :ref:`Hello World with call_soon() <asyncio-hello-world-callback>`
   example uses the :meth:`BaseEventLoop.call_soon` method to schedule a
   callback.


.. _asyncio-date-coroutine:

Example: Coroutine displaying the current date
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Example of coroutine displaying the current date every second during 5 seconds
using the :meth:`sleep` function::

    import asyncio
    import datetime

    @asyncio.coroutine
    def display_date(loop):
        end_time = loop.time() + 5.0
        while True:
            print(datetime.datetime.now())
            if (loop.time() + 1.0) >= end_time:
                break
            yield from asyncio.sleep(1)

    loop = asyncio.get_event_loop()
    # Blocking call which returns when the display_date() coroutine is done
    loop.run_until_complete(display_date(loop))
    loop.close()

.. seealso::

   The :ref:`display the current date with call_later()
   <asyncio-date-callback>` example uses a callback with the
   :meth:`BaseEventLoop.call_later` method.


Example: Chain coroutines
^^^^^^^^^^^^^^^^^^^^^^^^^

Example chaining coroutines::

    import asyncio

    @asyncio.coroutine
    def compute(x, y):
        print("Compute %s + %s ..." % (x, y))
        yield from asyncio.sleep(1.0)
        return x + y

    @asyncio.coroutine
    def print_sum(x, y):
        result = yield from compute(x, y)
        print("%s + %s = %s" % (x, y, result))

    loop = asyncio.get_event_loop()
    loop.run_until_complete(print_sum(1, 2))
    loop.close()

``compute()`` is chained to ``print_sum()``: ``print_sum()`` coroutine waits
until ``compute()`` is completed before returning its result.

Sequence diagram of the example:

.. image:: tulip_coro.png
   :align: center

The "Task" is created by the :meth:`BaseEventLoop.run_until_complete` method
when it gets a coroutine object instead of a task.

The diagram shows the control flow, it does not describe exactly how things
work internally. For example, the sleep coroutine creates an internal future
which uses :meth:`BaseEventLoop.call_later` to wake up the task in 1 second.


InvalidStateError
-----------------

.. exception:: InvalidStateError

   The operation is not allowed in this state.


TimeoutError
------------

.. exception:: TimeoutError

   The operation exceeded the given deadline.

.. note::

   This exception is different from the builtin :exc:`TimeoutError` exception!


Future
------

.. class:: Future(\*, loop=None)

   This class is *almost* compatible with :class:`concurrent.futures.Future`.

   Differences:

   - :meth:`result` and :meth:`exception` do not take a timeout argument and
     raise an exception when the future isn't done yet.

   - Callbacks registered with :meth:`add_done_callback` are always called
     via the event loop's :meth:`~BaseEventLoop.call_soon_threadsafe`.

   - This class is not compatible with the :func:`~concurrent.futures.wait` and
     :func:`~concurrent.futures.as_completed` functions in the
     :mod:`concurrent.futures` package.

   .. method:: cancel()

      Cancel the future and schedule callbacks.

      If the future is already done or cancelled, return ``False``. Otherwise,
      change the future's state to cancelled, schedule the callbacks and return
      ``True``.

   .. method:: cancelled()

      Return ``True`` if the future was cancelled.

   .. method:: done()

      Return True if the future is done.

      Done means either that a result / exception are available, or that the
      future was cancelled.

   .. method:: result()

      Return the result this future represents.

      If the future has been cancelled, raises :exc:`CancelledError`. If the
      future's result isn't yet available, raises :exc:`InvalidStateError`. If
      the future is done and has an exception set, this exception is raised.

   .. method:: exception()

      Return the exception that was set on this future.

      The exception (or ``None`` if no exception was set) is returned only if
      the future is done. If the future has been cancelled, raises
      :exc:`CancelledError`. If the future isn't done yet, raises
      :exc:`InvalidStateError`.

   .. method:: add_done_callback(fn)

      Add a callback to be run when the future becomes done.

      The callback is called with a single argument - the future object. If the
      future is already done when this is called, the callback is scheduled
      with :meth:`~BaseEventLoop.call_soon`.

   .. method:: remove_done_callback(fn)

      Remove all instances of a callback from the "call when done" list.

      Returns the number of callbacks removed.

   .. method:: set_result(result)

      Mark the future done and set its result.

      If the future is already done when this method is called, raises
      :exc:`InvalidStateError`.

   .. method:: set_exception(exception)

      Mark the future done and set an exception.

      If the future is already done when this method is called, raises
      :exc:`InvalidStateError`.


Example: Future with run_until_complete()
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Example combining a :class:`Future` and a :ref:`coroutine function
<coroutine>`::

    import asyncio

    @asyncio.coroutine
    def slow_operation(future):
        yield from asyncio.sleep(1)
        future.set_result('Future is done!')

    loop = asyncio.get_event_loop()
    future = asyncio.Future()
    asyncio.async(slow_operation(future))
    loop.run_until_complete(future)
    print(future.result())
    loop.close()

The coroutine function is responsible for the computation (which takes 1 second)
and it stores the result into the future. The
:meth:`~BaseEventLoop.run_until_complete` method waits for the completion of
the future.

.. note::
   The :meth:`~BaseEventLoop.run_until_complete` method uses internally the
   :meth:`~Future.add_done_callback` method to be notified when the future is
   done.


Example: Future with run_forever()
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

The previous example can be written differently using the
:meth:`Future.add_done_callback` method to describe explicitly the control
flow::

    import asyncio

    @asyncio.coroutine
    def slow_operation(future):
        yield from asyncio.sleep(1)
        future.set_result('Future is done!')

    def got_result(future):
        print(future.result())
        loop.stop()

    loop = asyncio.get_event_loop()
    future = asyncio.Future()
    asyncio.async(slow_operation(future))
    future.add_done_callback(got_result)
    try:
        loop.run_forever()
    finally:
        loop.close()

In this example, the future is responsible to display the result and to stop
the loop.

.. note::
   The "slow_operation" coroutine object is only executed when the event loop
   starts running, so it is possible to add a "done callback" to the future
   after creating the task scheduling the coroutine object.



Task
----

.. class:: Task(coro, \*, loop=None)

   Schedule the execution of a :ref:`coroutine <coroutine>`: wrap it in a
   future. A task is a subclass of :class:`Future`.

   A task is responsible for executing a coroutine object in an event loop.  If
   the wrapped coroutine yields from a future, the task suspends the execution
   of the wrapped coroutine and waits for the completition of the future. When
   the future is done, the execution of the wrapped coroutine restarts with the
   result or the exception of the future.

   Event loops use cooperative scheduling: an event loop only runs one task at
   a time. Other tasks may run in parallel if other event loops are
   running in different threads. While a task waits for the completion of a
   future, the event loop executes a new task.

   The cancellation of a task is different from the cancelation of a future. Calling
   :meth:`cancel` will throw a :exc:`~concurrent.futures.CancelledError` to the
   wrapped coroutine. :meth:`~Future.cancelled` only returns ``True`` if the
   wrapped coroutine did not catch the
   :exc:`~concurrent.futures.CancelledError` exception, or raised a
   :exc:`~concurrent.futures.CancelledError` exception.

   If a pending task is destroyed, the execution of its wrapped :ref:`coroutine
   <coroutine>` did not complete. It is probably a bug and a warning is
   logged: see :ref:`Pending task destroyed <asyncio-pending-task-destroyed>`.

   Don't directly create :class:`Task` instances: use the :func:`async`
   function or the :meth:`BaseEventLoop.create_task` method.

   .. classmethod:: all_tasks(loop=None)

      Return a set of all tasks for an event loop.

      By default all tasks for the current event loop are returned.

   .. classmethod:: current_task(loop=None)

      Return the currently running task in an event loop or ``None``.

      By default the current task for the current event loop is returned.

      ``None`` is returned when called not in the context of a :class:`Task`.

   .. method:: cancel()

      Request that this task cancel itself.

      This arranges for a :exc:`~concurrent.futures.CancelledError` to be
      thrown into the wrapped coroutine on the next cycle through the event
      loop. The coroutine then has a chance to clean up or even deny the
      request using try/except/finally.

      Unlike :meth:`Future.cancel`, this does not guarantee that the task
      will be cancelled: the exception might be caught and acted upon, delaying
      cancellation of the task or preventing cancellation completely. The task
      may also return a value or raise a different exception.

      Immediately after this method is called, :meth:`~Future.cancelled` will
      not return ``True`` (unless the task was already cancelled). A task will
      be marked as cancelled when the wrapped coroutine terminates with a
      :exc:`~concurrent.futures.CancelledError` exception (even if
      :meth:`cancel` was not called).

   .. method:: get_stack(\*, limit=None)

      Return the list of stack frames for this task's coroutine.

      If the coroutine is active, this returns the stack where it is suspended.
      If the coroutine has completed successfully or was cancelled, this
      returns an empty list.  If the coroutine was terminated by an exception,
      this returns the list of traceback frames.

      The frames are always ordered from oldest to newest.

      The optional limit gives the maximum number of frames to return; by
      default all available frames are returned.  Its meaning differs depending
      on whether a stack or a traceback is returned: the newest frames of a
      stack are returned, but the oldest frames of a traceback are returned.
      (This matches the behavior of the traceback module.)

      For reasons beyond our control, only one stack frame is returned for a
      suspended coroutine.

   .. method:: print_stack(\*, limit=None, file=None)

      Print the stack or traceback for this task's coroutine.

      This produces output similar to that of the traceback module, for the
      frames retrieved by get_stack().  The limit argument is passed to
      get_stack().  The file argument is an I/O stream to which the output
      is written; by default output is written to sys.stderr.


Example: Parallel execution of tasks
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Example executing 3 tasks (A, B, C) in parallel::

    import asyncio

    @asyncio.coroutine
    def factorial(name, number):
        f = 1
        for i in range(2, number+1):
            print("Task %s: Compute factorial(%s)..." % (name, i))
            yield from asyncio.sleep(1)
            f *= i
        print("Task %s: factorial(%s) = %s" % (name, number, f))

    loop = asyncio.get_event_loop()
    tasks = [
        asyncio.async(factorial("A", 2)),
        asyncio.async(factorial("B", 3)),
        asyncio.async(factorial("C", 4))]
    loop.run_until_complete(asyncio.wait(tasks))
    loop.close()

Output::

    Task A: Compute factorial(2)...
    Task B: Compute factorial(2)...
    Task C: Compute factorial(2)...
    Task A: factorial(2) = 2
    Task B: Compute factorial(3)...
    Task C: Compute factorial(3)...
    Task B: factorial(3) = 6
    Task C: Compute factorial(4)...
    Task C: factorial(4) = 24

A task is automatically scheduled for execution when it is created. The event
loop stops when all tasks are done.


Task functions
--------------

.. note::

   In the functions below, the optional *loop* argument allows to explicitly set
   the event loop object used by the underlying task or coroutine.  If it's
   not provided, the default event loop is used.

.. function:: as_completed(fs, \*, loop=None, timeout=None)

   Return an iterator whose values, when waited for, are :class:`Future`
   instances.

   Raises :exc:`asyncio.TimeoutError` if the timeout occurs before all Futures
   are done.

   Example::

       for f in as_completed(fs):
           result = yield from f  # The 'yield from' may raise
           # Use result

   .. note::

      The futures ``f`` are not necessarily members of fs.

.. function:: async(coro_or_future, \*, loop=None)

   Schedule the execution of a :ref:`coroutine object <coroutine>`: wrap it in
   a future. Return a :class:`Task` object.

   If the argument is a :class:`Future`, it is returned directly.

   .. seealso::

      The :meth:`BaseEventLoop.create_task` method.

.. function:: gather(\*coros_or_futures, loop=None, return_exceptions=False)

   Return a future aggregating results from the given coroutine objects or
   futures.

   All futures must share the same event loop.  If all the tasks are done
   successfully, the returned future's result is the list of results (in the
   order of the original sequence, not necessarily the order of results
   arrival).  If *return_exceptions* is True, exceptions in the tasks are
   treated the same as successful results, and gathered in the result list;
   otherwise, the first raised exception will be immediately propagated to the
   returned future.

   Cancellation: if the outer Future is cancelled, all children (that have not
   completed yet) are also cancelled.  If any child is cancelled, this is
   treated as if it raised :exc:`~concurrent.futures.CancelledError` -- the
   outer Future is *not* cancelled in this case.  (This is to prevent the
   cancellation of one child to cause other children to be cancelled.)

.. function:: iscoroutine(obj)

   Return ``True`` if *obj* is a :ref:`coroutine object <coroutine>`.

.. function:: iscoroutinefunction(obj)

   Return ``True`` if *func* is a decorated :ref:`coroutine function
   <coroutine>`.

.. function:: sleep(delay, result=None, \*, loop=None)

   Create a :ref:`coroutine <coroutine>` that completes after a given
   time (in seconds).  If *result* is provided, it is produced to the caller
   when the coroutine completes.

   The resolution of the sleep depends on the :ref:`granularity of the event
   loop <asyncio-delayed-calls>`.

.. function:: shield(arg, \*, loop=None)

   Wait for a future, shielding it from cancellation.

   The statement::

       res = yield from shield(something())

   is exactly equivalent to the statement::

       res = yield from something()

   *except* that if the coroutine containing it is cancelled, the task running
   in ``something()`` is not cancelled.  From the point of view of
   ``something()``, the cancellation did not happen.  But its caller is still
   cancelled, so the yield-from expression still raises
   :exc:`~concurrent.futures.CancelledError`.  Note: If ``something()`` is
   cancelled by other means this will still cancel ``shield()``.

   If you want to completely ignore cancellation (not recommended) you can
   combine ``shield()`` with a try/except clause, as follows::

       try:
           res = yield from shield(something())
       except CancelledError:
           res = None

.. function:: wait(futures, \*, loop=None, timeout=None, return_when=ALL_COMPLETED)

   Wait for the Futures and coroutine objects given by the sequence *futures*
   to complete.  Coroutines will be wrapped in Tasks. Returns two sets of
   :class:`Future`: (done, pending).

   The sequence *futures* must not be empty.

   *timeout* can be used to control the maximum number of seconds to wait before
   returning.  *timeout* can be an int or float.  If *timeout* is not specified
   or ``None``, there is no limit to the wait time.

   *return_when* indicates when this function should return.  It must be one of
   the following constants of the :mod:`concurrent.futures` module:

   .. tabularcolumns:: |l|L|

   +-----------------------------+----------------------------------------+
   | Constant                    | Description                            |
   +=============================+========================================+
   | :const:`FIRST_COMPLETED`    | The function will return when any      |
   |                             | future finishes or is cancelled.       |
   +-----------------------------+----------------------------------------+
   | :const:`FIRST_EXCEPTION`    | The function will return when any      |
   |                             | future finishes by raising an          |
   |                             | exception.  If no future raises an     |
   |                             | exception then it is equivalent to     |
   |                             | :const:`ALL_COMPLETED`.                |
   +-----------------------------+----------------------------------------+
   | :const:`ALL_COMPLETED`      | The function will return when all      |
   |                             | futures finish or are cancelled.       |
   +-----------------------------+----------------------------------------+

   This function is a :ref:`coroutine <coroutine>`.

   Usage::

        done, pending = yield from asyncio.wait(fs)

   .. note::

      This does not raise :exc:`asyncio.TimeoutError`! Futures that aren't done
      when the timeout occurs are returned in the second set.


.. function:: wait_for(fut, timeout, \*, loop=None)

   Wait for the single :class:`Future` or :ref:`coroutine object <coroutine>`
   to complete with timeout. If *timeout* is ``None``, block until the future
   completes.

   Coroutine will be wrapped in :class:`Task`.

   Returns result of the Future or coroutine.  When a timeout occurs, it
   cancels the task and raises :exc:`asyncio.TimeoutError`. To avoid the task
   cancellation, wrap it in :func:`shield`.

   This function is a :ref:`coroutine <coroutine>`, usage::

       result = yield from asyncio.wait_for(fut, 60.0)