Modules/errnomodule.c

/***********************************************************
Copyright 1991-1995 by Stichting Mathematisch Centrum, Amsterdam,
The Netherlands.

                        All Rights Reserved

Permission to use, copy, modify, and distribute this software and its
documentation for any purpose and without fee is hereby granted,
provided that the above copyright notice appear in all copies and that
both that copyright notice and this permission notice appear in
supporting documentation, and that the names of Stichting Mathematisch
Centrum or CWI or Corporation for National Research Initiatives or
CNRI not be used in advertising or publicity pertaining to
distribution of the software without specific, written prior
permission.

While CWI is the initial source for this software, a modified version
is made available by the Corporation for National Research Initiatives
(CNRI) at the Internet address ftp://ftp.python.org.

STICHTING MATHEMATISCH CENTRUM AND CNRI DISCLAIM ALL WARRANTIES WITH
REGARD TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL STICHTING MATHEMATISCH
CENTRUM OR CNRI BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL
DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
PERFORMANCE OF THIS SOFTWARE.

******************************************************************/

/* Errno module */

#include "Python.h"

/* Mac with GUSI has more errors than those in errno.h */
#ifdef USE_GUSI
#include <sys/errno.h>
#endif

/* Windows socket errors (WSA*): XXX is this the correct path ???  */
#ifdef MS_WINDOWS
#include <winsock.h>
#endif

/*
 * Pull in the system error definitions
 */ 

static PyMethodDef errno_methods[] = {
	{NULL,	      	NULL}
};

/* Helper function doing the dictionary inserting */

static void
_inscode(d, de, name, code)
	PyObject *d;
	PyObject *de;
	char *name;
	int code;
{
	PyObject *u;
	PyObject *v;

	u = PyString_FromString(name);
	v = PyInt_FromLong((long) code);

	if (!u || !v) {
		/* Don't bother reporting this error */
		PyErr_Clear();
	}
	else {
		/* insert in modules dict */
		PyDict_SetItem(d, u, v);
		/* insert in errorcode dict */
		PyDict_SetItem(de, v, u);
	}
	Py_XDECREF(u);
	Py_XDECREF(v);
}

void
initerrno()
{
	PyObject *m, *d, *de;
	m = Py_InitModule("errno", errno_methods);
	d = PyModule_GetDict(m);
	de = PyDict_New();
	if (de == NULL || PyDict_SetItemString(d,"errorcode",de))
		Py_FatalError("can't initialize errno module");

/* Macro so I don't have to edit each and every line below... */
#define inscode(d, ds, de, name, code, comment) _inscode(d, de, name, code)

	/*
	 * The names and comments are borrowed from linux/include/errno.h,
	 * which should be pretty all-inclusive
	 */ 

#ifdef ENODEV
	inscode(d, ds, de, "ENODEV", ENODEV, "No such device");
#endif
#ifdef ENOCSI
	inscode(d, ds, de, "ENOCSI", ENOCSI, "No CSI structure available");
#endif
#ifdef EHOSTUNREACH
	inscode(d, ds, de, "EHOSTUNREACH", EHOSTUNREACH, "No route to host");
#else
#ifdef WSAEHOSTUNREACH
	inscode(d, ds, de, "EHOSTUNREACH", WSAEHOSTUNREACH, "No route to host");
#endif
#endif
#ifdef ENOMSG
	inscode(d, ds, de, "ENOMSG", ENOMSG, "No message of desired type");
#endif
#ifdef EUCLEAN
	inscode(d, ds, de, "EUCLEAN", EUCLEAN, "Structure needs cleaning");
#endif
#ifdef EL2NSYNC
	inscode(d, ds, de, "EL2NSYNC", EL2NSYNC, "Level 2 not synchronized");
#endif
#ifdef EL2HLT
	inscode(d, ds, de, "EL2HLT", EL2HLT, "Level 2 halted");
#endif
#ifdef ENODATA
	inscode(d, ds, de, "ENODATA", ENODATA, "No data available");
#endif
#ifdef ENOTBLK
	inscode(d, ds, de, "ENOTBLK", ENOTBLK, "Block device required");
#endif
#ifdef ENOSYS
	inscode(d, ds, de, "ENOSYS", ENOSYS, "Function not implemented");
#endif
#ifdef EPIPE
	inscode(d, ds, de, "EPIPE", EPIPE, "Broken pipe");
#endif
#ifdef EINVAL
	inscode(d, ds, de, "EINVAL", EINVAL, "Invalid argument");
#else
#ifdef WSAEINVAL
	inscode(d, ds, de, "EINVAL", WSAEINVAL, "Invalid argument");
#endif
#endif
#ifdef EOVERFLOW
	inscode(d, ds, de, "EOVERFLOW", EOVERFLOW, "Value too large for defined data type");
#endif
#ifdef EADV
	inscode(d, ds, de, "EADV", EADV, "Advertise error");
#endif
#ifdef EINTR
	inscode(d, ds, de, "EINTR", EINTR, "Interrupted system call");
#else
#ifdef WSAEINTR
	inscode(d, ds, de, "EINTR", WSAEINTR, "Interrupted system call");
#endif
#endif
#ifdef EUSERS
	inscode(d, ds, de, "EUSERS", EUSERS, "Too many users");
#else
#ifdef WSAEUSERS
	inscode(d, ds, de, "EUSERS", WSAEUSERS, "Too many users");
#endif
#endif
#ifdef ENOTEMPTY
	inscode(d, ds, de, "ENOTEMPTY", ENOTEMPTY, "Directory not empty");
#else
#ifdef WSAENOTEMPTY
	inscode(d, ds, de, "ENOTEMPTY", WSAENOTEMPTY, "Directory not empty");
#endif
#endif
#ifdef ENOBUFS
	inscode(d, ds, de, "ENOBUFS", ENOBUFS, "No buffer space available");
#else
#ifdef WSAENOBUFS
	inscode(d, ds, de, "ENOBUFS", WSAENOBUFS, "No buffer space available");
#endif
#endif
#ifdef EPROTO
	inscode(d, ds, de, "EPROTO", EPROTO, "Protocol error");
#endif
#ifdef EREMOTE
	inscode(d, ds, de, "EREMOTE", EREMOTE, "Object is remote");
#else
#ifdef WSAEREMOTE
	inscode(d, ds, de, "EREMOTE", WSAEREMOTE, "Object is remote");
#endif
#endif
#ifdef ENAVAIL
	inscode(d, ds, de, "ENAVAIL", ENAVAIL, "No XENIX semaphores available");
#endif
#ifdef ECHILD
	inscode(d, ds, de, "ECHILD", ECHILD, "No child processes");
#endif
#ifdef ELOOP
	inscode(d, ds, de, "ELOOP", ELOOP, "Too many symbolic links encountered");
#else
#ifdef WSAELOOP
	inscode(d, ds, de, "ELOOP", WSAELOOP, "Too many symbolic links encountered");
#endif
#endif
#ifdef EXDEV
	inscode(d, ds, de, "EXDEV", EXDEV, "Cross-device link");
#endif
#ifdef E2BIG
	inscode(d, ds, de, "E2BIG", E2BIG, "Arg list too long");
#endif
#ifdef ESRCH
	inscode(d, ds, de, "ESRCH", ESRCH, "No such process");
#endif
#ifdef EMSGSIZE
	inscode(d, ds, de, "EMSGSIZE", EMSGSIZE, "Message too long");
#else
#ifdef WSAEMSGSIZE
	inscode(d, ds, de, "EMSGSIZE", WSAEMSGSIZE, "Message too long");
#endif
#endif
#ifdef EAFNOSUPPORT
	inscode(d, ds, de, "EAFNOSUPPORT", EAFNOSUPPORT, "Address family not supported by protocol");
#else
#ifdef WSAEAFNOSUPPORT
	inscode(d, ds, de, "EAFNOSUPPORT", WSAEAFNOSUPPORT, "Address family not supported by protocol");
#endif
#endif
#ifdef EBADR
	inscode(d, ds, de, "EBADR", EBADR, "Invalid request descriptor");
#endif
#ifdef EHOSTDOWN
	inscode(d, ds, de, "EHOSTDOWN", EHOSTDOWN, "Host is down");
#else
#ifdef WSAEHOSTDOWN
	inscode(d, ds, de, "EHOSTDOWN", WSAEHOSTDOWN, "Host is down");
#endif
#endif
#ifdef EPFNOSUPPORT
	inscode(d, ds, de, "EPFNOSUPPORT", EPFNOSUPPORT, "Protocol family not supported");
#else
#ifdef WSAEPFNOSUPPORT
	inscode(d, ds, de, "EPFNOSUPPORT", WSAEPFNOSUPPORT, "Protocol family not supported");
#endif
#endif
#ifdef ENOPROTOOPT
	inscode(d, ds, de, "ENOPROTOOPT", ENOPROTOOPT, "Protocol not available");
#else
#ifdef WSAENOPROTOOPT
	inscode(d, ds, de, "ENOPROTOOPT", WSAENOPROTOOPT, "Protocol not available");
#endif
#endif
#ifdef EBUSY
	inscode(d, ds, de, "EBUSY", EBUSY, "Device or resource busy");
#endif
#ifdef EWOULDBLOCK
	inscode(d, ds, de, "EWOULDBLOCK", EWOULDBLOCK, "Operation would block");
#else
#ifdef WSAEWOULDBLOCK
	inscode(d, ds, de, "EWOULDBLOCK", WSAEWOULDBLOCK, "Operation would block");
#endif
#endif
#ifdef EBADFD
	inscode(d, ds, de, "EBADFD", EBADFD, "File descriptor in bad state");
#endif
#ifdef EDOTDOT
	inscode(d, ds, de, "EDOTDOT", EDOTDOT, "RFS specific error");
#endif
#ifdef EISCONN
	inscode(d, ds, de, "EISCONN", EISCONN, "Transport endpoint is already connected");
#else
#ifdef WSAEISCONN
	inscode(d, ds, de, "EISCONN", WSAEISCONN, "Transport endpoint is already connected");
#endif
#endif
#ifdef ENOANO
	inscode(d, ds, de, "ENOANO", ENOANO, "No anode");
#endif
#ifdef ESHUTDOWN
	inscode(d, ds, de, "ESHUTDOWN", ESHUTDOWN, "Cannot send after transport endpoint shutdown");
#else
#ifdef WSAESHUTDOWN
	inscode(d, ds, de, "ESHUTDOWN", WSAESHUTDOWN, "Cannot send after transport endpoint shutdown");
#endif
#endif
#ifdef ECHRNG
	inscode(d, ds, de, "ECHRNG", ECHRNG, "Channel number out of range");
#endif
#ifdef ELIBBAD
	inscode(d, ds, de, "ELIBBAD", ELIBBAD, "Accessing a corrupted shared library");
#endif
#ifdef ENONET
	inscode(d, ds, de, "ENONET", ENONET, "Machine is not on the network");
#endif
#ifdef EBADE
	inscode(d, ds, de, "EBADE", EBADE, "Invalid exchange");
#endif
#ifdef EBADF
	inscode(d, ds, de, "EBADF", EBADF, "Bad file number");
#else
#ifdef WSAEBADF
	inscode(d, ds, de, "EBADF", WSAEBADF, "Bad file number");
#endif
#endif
#ifdef EMULTIHOP
	inscode(d, ds, de, "EMULTIHOP", EMULTIHOP, "Multihop attempted");
#endif
#ifdef EIO
	inscode(d, ds, de, "EIO", EIO, "I/O error");
#endif
#ifdef EUNATCH
	inscode(d, ds, de, "EUNATCH", EUNATCH, "Protocol driver not attached");
#endif
#ifdef EPROTOTYPE
	inscode(d, ds, de, "EPROTOTYPE", EPROTOTYPE, "Protocol wrong type for socket");
#else
#ifdef WSAEPROTOTYPE
	inscode(d, ds, de, "EPROTOTYPE", WSAEPROTOTYPE, "Protocol wrong type for socket");
#endif
#endif
#ifdef ENOSPC
	inscode(d, ds, de, "ENOSPC", ENOSPC, "No space left on device");
#endif
#ifdef ENOEXEC
	inscode(d, ds, de, "ENOEXEC", ENOEXEC, "Exec format error");
#endif
#ifdef EALREADY
	inscode(d, ds, de, "EALREADY", EALREADY, "Operation already in progress");
#else
#ifdef WSAEALREADY
	inscode(d, ds, de, "EALREADY", WSAEALREADY, "Operation already in progress");
#endif
#endif
#ifdef ENETDOWN
	inscode(d, ds, de, "ENETDOWN", ENETDOWN, "Network is down");
#else
#ifdef WSAENETDOWN
	inscode(d, ds, de, "ENETDOWN", WSAENETDOWN, "Network is down");
#endif
#endif
#ifdef ENOTNAM
	inscode(d, ds, de, "ENOTNAM", ENOTNAM, "Not a XENIX named type file");
#endif
#ifdef EACCES
	inscode(d, ds, de, "EACCES", EACCES, "Permission denied");
#else
#ifdef WSAEACCES
	inscode(d, ds, de, "EACCES", WSAEACCES, "Permission denied");
#endif
#endif
#ifdef ELNRNG
	inscode(d, ds, de, "ELNRNG", ELNRNG, "Link number out of range");
#endif
#ifdef EILSEQ
	inscode(d, ds, de, "EILSEQ", EILSEQ, "Illegal byte sequence");
#endif
#ifdef ENOTDIR
	inscode(d, ds, de, "ENOTDIR", ENOTDIR, "Not a directory");
#endif
#ifdef ENOTUNIQ
	inscode(d, ds, de, "ENOTUNIQ", ENOTUNIQ, "Name not unique on network");
#endif
#ifdef EPERM
	inscode(d, ds, de, "EPERM", EPERM, "Operation not permitted");
#endif
#ifdef EDOM
	inscode(d, ds, de, "EDOM", EDOM, "Math argument out of domain of func");
#endif
#ifdef EXFULL
	inscode(d, ds, de, "EXFULL", EXFULL, "Exchange full");
#endif
#ifdef ECONNREFUSED
	inscode(d, ds, de, "ECONNREFUSED", ECONNREFUSED, "Connection refused");
#else
#ifdef WSAECONNREFUSED
	inscode(d, ds, de, "ECONNREFUSED", WSAECONNREFUSED, "Connection refused");
#endif
#endif
#ifdef EISDIR
	inscode(d, ds, de, "EISDIR", EISDIR, "Is a directory");
#endif
#ifdef EPROTONOSUPPORT
	inscode(d, ds, de, "EPROTONOSUPPORT", EPROTONOSUPPORT, "Protocol not supported");
#else
#ifdef WSAEPROTONOSUPPORT
	inscode(d, ds, de, "EPROTONOSUPPORT", WSAEPROTONOSUPPORT, "Protocol not supported");
#endif
#endif
#ifdef EROFS
	inscode(d, ds, de, "EROFS", EROFS, "Read-only file system");
#endif
#ifdef EADDRNOTAVAIL
	inscode(d, ds, de, "EADDRNOTAVAIL", EADDRNOTAVAIL, "Cannot assign requested address");
#else
#ifdef WSAEADDRNOTAVAIL
	inscode(d, ds, de, "EADDRNOTAVAIL", WSAEADDRNOTAVAIL, "Cannot assign requested address");
#endif
#endif
#ifdef EIDRM
	inscode(d, ds, de, "EIDRM", EIDRM, "Identifier removed");
#endif
#ifdef ECOMM
	inscode(d, ds, de, "ECOMM", ECOMM, "Communication error on send");
#endif
#ifdef ESRMNT
	inscode(d, ds, de, "ESRMNT", ESRMNT, "Srmount error");
#endif
#ifdef EREMOTEIO
	inscode(d, ds, de, "EREMOTEIO", EREMOTEIO, "Remote I/O error");
#endif
#ifdef EL3RST
	inscode(d, ds, de, "EL3RST", EL3RST, "Level 3 reset");
#endif
#ifdef EBADMSG
	inscode(d, ds, de, "EBADMSG", EBADMSG, "Not a data message");
#endif
#ifdef ENFILE
	inscode(d, ds, de, "ENFILE", ENFILE, "File table overflow");
#endif
#ifdef ELIBMAX
	inscode(d, ds, de, "ELIBMAX", ELIBMAX, "Attempting to link in too many shared libraries");
#endif
#ifdef ESPIPE
	inscode(d, ds, de, "ESPIPE", ESPIPE, "Illegal seek");
#endif
#ifdef ENOLINK
	inscode(d, ds, de, "ENOLINK", ENOLINK, "Link has been severed");
#endif
#ifdef ENETRESET
	inscode(d, ds, de, "ENETRESET", ENETRESET, "Network dropped connection because of reset");
#else
#ifdef WSAENETRESET
	inscode(d, ds, de, "ENETRESET", WSAENETRESET, "Network dropped connection because of reset");
#endif
#endif
#ifdef ETIMEDOUT
	inscode(d, ds, de, "ETIMEDOUT", ETIMEDOUT, "Connection timed out");
#else
#ifdef WSAETIMEDOUT
	inscode(d, ds, de, "ETIMEDOUT", WSAETIMEDOUT, "Connection timed out");
#endif
#endif
#ifdef ENOENT
	inscode(d, ds, de, "ENOENT", ENOENT, "No such file or directory");
#endif
#ifdef EEXIST
	inscode(d, ds, de, "EEXIST", EEXIST, "File exists");
#endif
#ifdef EDQUOT
	inscode(d, ds, de, "EDQUOT", EDQUOT, "Quota exceeded");
#else
#ifdef WSAEDQUOT
	inscode(d, ds, de, "EDQUOT", WSAEDQUOT, "Quota exceeded");
#endif
#endif
#ifdef ENOSTR
	inscode(d, ds, de, "ENOSTR", ENOSTR, "Device not a stream");
#endif
#ifdef EBADSLT
	inscode(d, ds, de, "EBADSLT", EBADSLT, "Invalid slot");
#endif
#ifdef EBADRQC
	inscode(d, ds, de, "EBADRQC", EBADRQC, "Invalid request code");
#endif
#ifdef ELIBACC
	inscode(d, ds, de, "ELIBACC", ELIBACC, "Can not access a needed shared library");
#endif
#ifdef EFAULT
	inscode(d, ds, de, "EFAULT", EFAULT, "Bad address");
#else
#ifdef WSAEFAULT
	inscode(d, ds, de, "EFAULT", WSAEFAULT, "Bad address");
#endif
#endif
#ifdef EFBIG
	inscode(d, ds, de, "EFBIG", EFBIG, "File too large");
#endif
#ifdef EDEADLK
	inscode(d, ds, de, "EDEADLK", EDEADLK, "Resource deadlock would occur");
#endif
#ifdef ENOTCONN
	inscode(d, ds, de, "ENOTCONN", ENOTCONN, "Transport endpoint is not connected");
#else
#ifdef WSAENOTCONN
	inscode(d, ds, de, "ENOTCONN", WSAENOTCONN, "Transport endpoint is not connected");
#endif
#endif
#ifdef EDESTADDRREQ
	inscode(d, ds, de, "EDESTADDRREQ", EDESTADDRREQ, "Destination address required");
#else
#ifdef WSAEDESTADDRREQ
	inscode(d, ds, de, "EDESTADDRREQ", WSAEDESTADDRREQ, "Destination address required");
#endif
#endif
#ifdef ELIBSCN
	inscode(d, ds, de, "ELIBSCN", ELIBSCN, ".lib section in a.out corrupted");
#endif
#ifdef ENOLCK
	inscode(d, ds, de, "ENOLCK", ENOLCK, "No record locks available");
#endif
#ifdef EISNAM
	inscode(d, ds, de, "EISNAM", EISNAM, "Is a named type file");
#endif
#ifdef ECONNABORTED
	inscode(d, ds, de, "ECONNABORTED", ECONNABORTED, "Software caused connection abort");
#else
#ifdef WSAECONNABORTED
	inscode(d, ds, de, "ECONNABORTED", WSAECONNABORTED, "Software caused connection abort");
#endif
#endif
#ifdef ENETUNREACH
	inscode(d, ds, de, "ENETUNREACH", ENETUNREACH, "Network is unreachable");
#else
#ifdef WSAENETUNREACH
	inscode(d, ds, de, "ENETUNREACH", WSAENETUNREACH, "Network is unreachable");
#endif
#endif
#ifdef ESTALE
	inscode(d, ds, de, "ESTALE", ESTALE, "Stale NFS file handle");
#else
#ifdef WSAESTALE
	inscode(d, ds, de, "ESTALE", WSAESTALE, "Stale NFS file handle");
#endif
#endif
#ifdef ENOSR
	inscode(d, ds, de, "ENOSR", ENOSR, "Out of streams resources");
#endif
#ifdef ENOMEM
	inscode(d, ds, de, "ENOMEM", ENOMEM, "Out of memory");
#endif
#ifdef ENOTSOCK
	inscode(d, ds, de, "ENOTSOCK", ENOTSOCK, "Socket operation on non-socket");
#else
#ifdef WSAENOTSOCK
	inscode(d, ds, de, "ENOTSOCK", WSAENOTSOCK, "Socket operation on non-socket");
#endif
#endif
#ifdef ESTRPIPE
	inscode(d, ds, de, "ESTRPIPE", ESTRPIPE, "Streams pipe error");
#endif
#ifdef EMLINK
	inscode(d, ds, de, "EMLINK", EMLINK, "Too many links");
#endif
#ifdef ERANGE
	inscode(d, ds, de, "ERANGE", ERANGE, "Math result not representable");
#endif
#ifdef ELIBEXEC
	inscode(d, ds, de, "ELIBEXEC", ELIBEXEC, "Cannot exec a shared library directly");
#endif
#ifdef EL3HLT
	inscode(d, ds, de, "EL3HLT", EL3HLT, "Level 3 halted");
#endif
#ifdef ECONNRESET
	inscode(d, ds, de, "ECONNRESET", ECONNRESET, "Connection reset by peer");
#else
#ifdef WSAECONNRESET
	inscode(d, ds, de, "ECONNRESET", WSAECONNRESET, "Connection reset by peer");
#endif
#endif
#ifdef EADDRINUSE
	inscode(d, ds, de, "EADDRINUSE", EADDRINUSE, "Address already in use");
#else
#ifdef WSAEADDRINUSE
	inscode(d, ds, de, "EADDRINUSE", WSAEADDRINUSE, "Address already in use");
#endif
#endif
#ifdef EOPNOTSUPP
	inscode(d, ds, de, "EOPNOTSUPP", EOPNOTSUPP, "Operation not supported on transport endpoint");
#else
#ifdef WSAEOPNOTSUPP
	inscode(d, ds, de, "EOPNOTSUPP", WSAEOPNOTSUPP, "Operation not supported on transport endpoint");
#endif
#endif
#ifdef EREMCHG
	inscode(d, ds, de, "EREMCHG", EREMCHG, "Remote address changed");
#endif
#ifdef EAGAIN
	inscode(d, ds, de, "EAGAIN", EAGAIN, "Try again");
#endif
#ifdef ENAMETOOLONG
	inscode(d, ds, de, "ENAMETOOLONG", ENAMETOOLONG, "File name too long");
#else
#ifdef WSAENAMETOOLONG
	inscode(d, ds, de, "ENAMETOOLONG", WSAENAMETOOLONG, "File name too long");
#endif
#endif
#ifdef ENOTTY
	inscode(d, ds, de, "ENOTTY", ENOTTY, "Not a typewriter");
#endif
#ifdef ERESTART
	inscode(d, ds, de, "ERESTART", ERESTART, "Interrupted system call should be restarted");
#endif
#ifdef ESOCKTNOSUPPORT
	inscode(d, ds, de, "ESOCKTNOSUPPORT", ESOCKTNOSUPPORT, "Socket type not supported");
#else
#ifdef WSAESOCKTNOSUPPORT
	inscode(d, ds, de, "ESOCKTNOSUPPORT", WSAESOCKTNOSUPPORT, "Socket type not supported");
#endif
#endif
#ifdef ETIME
	inscode(d, ds, de, "ETIME", ETIME, "Timer expired");
#endif
#ifdef EBFONT
	inscode(d, ds, de, "EBFONT", EBFONT, "Bad font file format");
#endif
#ifdef EDEADLOCK
	inscode(d, ds, de, "EDEADLOCK", EDEADLOCK, "Error EDEADLOCK");
#endif
#ifdef ETOOMANYREFS
	inscode(d, ds, de, "ETOOMANYREFS", ETOOMANYREFS, "Too many references: cannot splice");
#else
#ifdef WSAETOOMANYREFS
	inscode(d, ds, de, "ETOOMANYREFS", WSAETOOMANYREFS, "Too many references: cannot splice");
#endif
#endif
#ifdef EMFILE
	inscode(d, ds, de, "EMFILE", EMFILE, "Too many open files");
#else
#ifdef WSAEMFILE
	inscode(d, ds, de, "EMFILE", WSAEMFILE, "Too many open files");
#endif
#endif
#ifdef ETXTBSY
	inscode(d, ds, de, "ETXTBSY", ETXTBSY, "Text file busy");
#endif
#ifdef EINPROGRESS
	inscode(d, ds, de, "EINPROGRESS", EINPROGRESS, "Operation now in progress");
#else
#ifdef WSAEINPROGRESS
	inscode(d, ds, de, "EINPROGRESS", WSAEINPROGRESS, "Operation now in progress");
#endif
#endif
#ifdef ENXIO
	inscode(d, ds, de, "ENXIO", ENXIO, "No such device or address");
#endif
#ifdef ENOPKG
	inscode(d, ds, de, "ENOPKG", ENOPKG, "Package not installed");
#endif
#ifdef WSASY
	inscode(d, ds, de, "WSASY", WSASY, "Error WSASY");
#endif
#ifdef WSAEHOSTDOWN
	inscode(d, ds, de, "WSAEHOSTDOWN", WSAEHOSTDOWN, "Host is down");
#endif
#ifdef WSAENETDOWN
	inscode(d, ds, de, "WSAENETDOWN", WSAENETDOWN, "Network is down");
#endif
#ifdef WSAENOTSOCK
	inscode(d, ds, de, "WSAENOTSOCK", WSAENOTSOCK, "Socket operation on non-socket");
#endif
#ifdef WSAEHOSTUNREACH
	inscode(d, ds, de, "WSAEHOSTUNREACH", WSAEHOSTUNREACH, "No route to host");
#endif
#ifdef WSAELOOP
	inscode(d, ds, de, "WSAELOOP", WSAELOOP, "Too many symbolic links encountered");
#endif
#ifdef WSAEMFILE
	inscode(d, ds, de, "WSAEMFILE", WSAEMFILE, "Too many open files");
#endif
#ifdef WSAESTALE
	inscode(d, ds, de, "WSAESTALE", WSAESTALE, "Stale NFS file handle");
#endif
#ifdef WSAVERNOTSUPPORTED
	inscode(d, ds, de, "WSAVERNOTSUPPORTED", WSAVERNOTSUPPORTED, "Error WSAVERNOTSUPPORTED");
#endif
#ifdef WSAENETUNREACH
	inscode(d, ds, de, "WSAENETUNREACH", WSAENETUNREACH, "Network is unreachable");
#endif
#ifdef WSAEPROCLIM
	inscode(d, ds, de, "WSAEPROCLIM", WSAEPROCLIM, "Error WSAEPROCLIM");
#endif
#ifdef WSAEFAULT
	inscode(d, ds, de, "WSAEFAULT", WSAEFAULT, "Bad address");
#endif
#ifdef WSANOTINITIALISED
	inscode(d, ds, de, "WSANOTINITIALISED", WSANOTINITIALISED, "Error WSANOTINITIALISED");
#endif
#ifdef WSAEUSERS
	inscode(d, ds, de, "WSAEUSERS", WSAEUSERS, "Too many users");
#endif
#ifdef WSAMAKEASYNCREPL
	inscode(d, ds, de, "WSAMAKEASYNCREPL", WSAMAKEASYNCREPL, "Error WSAMAKEASYNCREPL");
#endif
#ifdef WSAENOPROTOOPT
	inscode(d, ds, de, "WSAENOPROTOOPT", WSAENOPROTOOPT, "Protocol not available");
#endif
#ifdef WSAECONNABORTED
	inscode(d, ds, de, "WSAECONNABORTED", WSAECONNABORTED, "Software caused connection abort");
#endif
#ifdef WSAENAMETOOLONG
	inscode(d, ds, de, "WSAENAMETOOLONG", WSAENAMETOOLONG, "File name too long");
#endif
#ifdef WSAENOTEMPTY
	inscode(d, ds, de, "WSAENOTEMPTY", WSAENOTEMPTY, "Directory not empty");
#endif
#ifdef WSAESHUTDOWN
	inscode(d, ds, de, "WSAESHUTDOWN", WSAESHUTDOWN, "Cannot send after transport endpoint shutdown");
#endif
#ifdef WSAEAFNOSUPPORT
	inscode(d, ds, de, "WSAEAFNOSUPPORT", WSAEAFNOSUPPORT, "Address family not supported by protocol");
#endif
#ifdef WSAETOOMANYREFS
	inscode(d, ds, de, "WSAETOOMANYREFS", WSAETOOMANYREFS, "Too many references: cannot splice");
#endif
#ifdef WSAEACCES
	inscode(d, ds, de, "WSAEACCES", WSAEACCES, "Permission denied");
#endif
#ifdef WSATR
	inscode(d, ds, de, "WSATR", WSATR, "Error WSATR");
#endif
#ifdef WSABASEERR
	inscode(d, ds, de, "WSABASEERR", WSABASEERR, "Error WSABASEERR");
#endif
#ifdef WSADESCRIPTIO
	inscode(d, ds, de, "WSADESCRIPTIO", WSADESCRIPTIO, "Error WSADESCRIPTIO");
#endif
#ifdef WSAEMSGSIZE
	inscode(d, ds, de, "WSAEMSGSIZE", WSAEMSGSIZE, "Message too long");
#endif
#ifdef WSAEBADF
	inscode(d, ds, de, "WSAEBADF", WSAEBADF, "Bad file number");
#endif
#ifdef WSAECONNRESET
	inscode(d, ds, de, "WSAECONNRESET", WSAECONNRESET, "Connection reset by peer");
#endif
#ifdef WSAGETSELECTERRO
	inscode(d, ds, de, "WSAGETSELECTERRO", WSAGETSELECTERRO, "Error WSAGETSELECTERRO");
#endif
#ifdef WSAETIMEDOUT
	inscode(d, ds, de, "WSAETIMEDOUT", WSAETIMEDOUT, "Connection timed out");
#endif
#ifdef WSAENOBUFS
	inscode(d, ds, de, "WSAENOBUFS", WSAENOBUFS, "No buffer space available");
#endif
#ifdef WSAEDISCON
	inscode(d, ds, de, "WSAEDISCON", WSAEDISCON, "Error WSAEDISCON");
#endif
#ifdef WSAEINTR
	inscode(d, ds, de, "WSAEINTR", WSAEINTR, "Interrupted system call");
#endif
#ifdef WSAEPROTOTYPE
	inscode(d, ds, de, "WSAEPROTOTYPE", WSAEPROTOTYPE, "Protocol wrong type for socket");
#endif
#ifdef WSAHOS
	inscode(d, ds, de, "WSAHOS", WSAHOS, "Error WSAHOS");
#endif
#ifdef WSAEADDRINUSE
	inscode(d, ds, de, "WSAEADDRINUSE", WSAEADDRINUSE, "Address already in use");
#endif
#ifdef WSAEADDRNOTAVAIL
	inscode(d, ds, de, "WSAEADDRNOTAVAIL", WSAEADDRNOTAVAIL, "Cannot assign requested address");
#endif
#ifdef WSAEALREADY
	inscode(d, ds, de, "WSAEALREADY", WSAEALREADY, "Operation already in progress");
#endif
#ifdef WSAEPROTONOSUPPORT
	inscode(d, ds, de, "WSAEPROTONOSUPPORT", WSAEPROTONOSUPPORT, "Protocol not supported");
#endif
#ifdef WSASYSNOTREADY
	inscode(d, ds, de, "WSASYSNOTREADY", WSASYSNOTREADY, "Error WSASYSNOTREADY");
#endif
#ifdef WSAEWOULDBLOCK
	inscode(d, ds, de, "WSAEWOULDBLOCK", WSAEWOULDBLOCK, "Operation would block");
#endif
#ifdef WSAEPFNOSUPPORT
	inscode(d, ds, de, "WSAEPFNOSUPPORT", WSAEPFNOSUPPORT, "Protocol family not supported");
#endif
#ifdef WSAEOPNOTSUPP
	inscode(d, ds, de, "WSAEOPNOTSUPP", WSAEOPNOTSUPP, "Operation not supported on transport endpoint");
#endif
#ifdef WSAEISCONN
	inscode(d, ds, de, "WSAEISCONN", WSAEISCONN, "Transport endpoint is already connected");
#endif
#ifdef WSAEDQUOT
	inscode(d, ds, de, "WSAEDQUOT", WSAEDQUOT, "Quota exceeded");
#endif
#ifdef WSAENOTCONN
	inscode(d, ds, de, "WSAENOTCONN", WSAENOTCONN, "Transport endpoint is not connected");
#endif
#ifdef WSAEREMOTE
	inscode(d, ds, de, "WSAEREMOTE", WSAEREMOTE, "Object is remote");
#endif
#ifdef WSAEINVAL
	inscode(d, ds, de, "WSAEINVAL", WSAEINVAL, "Invalid argument");
#endif
#ifdef WSAEINPROGRESS
	inscode(d, ds, de, "WSAEINPROGRESS", WSAEINPROGRESS, "Operation now in progress");
#endif
#ifdef WSAGETSELECTEVEN
	inscode(d, ds, de, "WSAGETSELECTEVEN", WSAGETSELECTEVEN, "Error WSAGETSELECTEVEN");
#endif
#ifdef WSAESOCKTNOSUPPORT
	inscode(d, ds, de, "WSAESOCKTNOSUPPORT", WSAESOCKTNOSUPPORT, "Socket type not supported");
#endif
#ifdef WSAGETASYNCERRO
	inscode(d, ds, de, "WSAGETASYNCERRO", WSAGETASYNCERRO, "Error WSAGETASYNCERRO");
#endif
#ifdef WSAMAKESELECTREPL
	inscode(d, ds, de, "WSAMAKESELECTREPL", WSAMAKESELECTREPL, "Error WSAMAKESELECTREPL");
#endif
#ifdef WSAGETASYNCBUFLE
	inscode(d, ds, de, "WSAGETASYNCBUFLE", WSAGETASYNCBUFLE, "Error WSAGETASYNCBUFLE");
#endif
#ifdef WSAEDESTADDRREQ
	inscode(d, ds, de, "WSAEDESTADDRREQ", WSAEDESTADDRREQ, "Destination address required");
#endif
#ifdef WSAECONNREFUSED
	inscode(d, ds, de, "WSAECONNREFUSED", WSAECONNREFUSED, "Connection refused");
#endif
#ifdef WSAENETRESET
	inscode(d, ds, de, "WSAENETRESET", WSAENETRESET, "Network dropped connection because of reset");
#endif
#ifdef WSAN
	inscode(d, ds, de, "WSAN", WSAN, "Error WSAN");
#endif

}