tools/PictureRenderer.cpp - platform/external/skia - Gitiles

 /*
  * Copyright 2012 Google Inc.
  *
  * Use of this source code is governed by a BSD-style license that can be
  * found in the LICENSE file.
  */

 #include "PictureRenderer.h"
 #include "picture_utils.h"
 #include "SamplePipeControllers.h"
 #include "SkCanvas.h"
 #include "SkDevice.h"
 #include "SkGPipe.h"
 #if SK_SUPPORT_GPU
 #include "SkGpuDevice.h"
 #endif
 #include "SkGraphics.h"
 #include "SkImageEncoder.h"
 #include "SkMatrix.h"
 #include "SkPicture.h"
 #include "SkScalar.h"
 #include "SkString.h"
 #include "SkTemplates.h"
 #include "SkTDArray.h"
 #include "SkThreadUtils.h"
 #include "SkTypes.h"

 namespace sk_tools {

 enum {
     kDefaultTileWidth = 256,
     kDefaultTileHeight = 256
 };

 void PictureRenderer::init(SkPicture* pict) {
     SkASSERT(NULL == fPicture);
     SkASSERT(NULL == fCanvas.get());
     if (fPicture != NULL || NULL != fCanvas.get()) {
         return;
     }

     SkASSERT(pict != NULL);
     if (NULL == pict) {
         return;
     }

     fPicture = pict;
     fCanvas.reset(this->setupCanvas());
 }

 SkCanvas* PictureRenderer::setupCanvas() {
     return this->setupCanvas(fPicture->width(), fPicture->height());
 }

 SkCanvas* PictureRenderer::setupCanvas(int width, int height) {
     switch(fDeviceType) {
         case kBitmap_DeviceType: {
             SkBitmap bitmap;
             sk_tools::setup_bitmap(&bitmap, width, height);
             return SkNEW_ARGS(SkCanvas, (bitmap));
             break;
         }
 #if SK_SUPPORT_GPU
         case kGPU_DeviceType: {
             SkAutoTUnref<SkGpuDevice> device(SkNEW_ARGS(SkGpuDevice,
                                                     (fGrContext, SkBitmap::kARGB_8888_Config,
                                                     width, height)));
             return SkNEW_ARGS(SkCanvas, (device.get()));
             break;
         }
 #endif
         default:
             SkASSERT(0);
     }

     return NULL;
 }

 void PictureRenderer::end() {
     this->resetState();
     fPicture = NULL;
     fCanvas.reset(NULL);
 }

 void PictureRenderer::resetState() {
 #if SK_SUPPORT_GPU
     if (this->isUsingGpuDevice()) {
         SkGLContext* glContext = fGrContextFactory.getGLContext(
             GrContextFactory::kNative_GLContextType);

         SkASSERT(glContext != NULL);
         if (NULL == glContext) {
             return;
         }

         fGrContext->flush();
         SK_GL(*glContext, Finish());
     }
 #endif
 }

 /**
  * Write the canvas to the specified path.
  * @param canvas Must be non-null. Canvas to be written to a file.
  * @param path Path for the file to be written. Should have no extension; write() will append
  *             an appropriate one. Passed in by value so it can be modified.
  * @return bool True if the Canvas is written to a file.
  */
 static bool write(SkCanvas* canvas, SkString path) {
     SkASSERT(canvas != NULL);
     if (NULL == canvas) {
         return false;
     }

     SkBitmap bitmap;
     SkISize size = canvas->getDeviceSize();
     sk_tools::setup_bitmap(&bitmap, size.width(), size.height());

     canvas->readPixels(&bitmap, 0, 0);
     sk_tools::force_all_opaque(bitmap);

     // Since path is passed in by value, it is okay to modify it.
     path.append(".png");
     return SkImageEncoder::EncodeFile(path.c_str(), bitmap, SkImageEncoder::kPNG_Type, 100);
 }

 /**
  * If path is non NULL, append number to it, and call write(SkCanvas*, SkString) to write the
  * provided canvas to a file. Returns true if path is NULL or if write() succeeds.
  */
 static bool writeAppendNumber(SkCanvas* canvas, const SkString* path, int number) {
     if (NULL == path) {
         return true;
     }
     SkString pathWithNumber(*path);
     pathWithNumber.appendf("%i", number);
     return write(canvas, pathWithNumber);
 }

 ///////////////////////////////////////////////////////////////////////////////////////////////

 bool RecordPictureRenderer::render(const SkString*) {
     SkPicture replayer;
     SkCanvas* recorder = replayer.beginRecording(fPicture->width(), fPicture->height());
     fPicture->draw(recorder);
     replayer.endRecording();
     // Since this class does not actually render, return false.
     return false;
 }

 ///////////////////////////////////////////////////////////////////////////////////////////////

 bool PipePictureRenderer::render(const SkString* path) {
     SkASSERT(fCanvas.get() != NULL);
     SkASSERT(fPicture != NULL);
     if (NULL == fCanvas.get() || NULL == fPicture) {
         return false;
     }

     PipeController pipeController(fCanvas.get());
     SkGPipeWriter writer;
     SkCanvas* pipeCanvas = writer.startRecording(&pipeController);
     pipeCanvas->drawPicture(*fPicture);
     writer.endRecording();
     fCanvas->flush();
     return path != NULL && write(fCanvas, *path);
 }

 ///////////////////////////////////////////////////////////////////////////////////////////////

 bool SimplePictureRenderer::render(const SkString* path) {
     SkASSERT(fCanvas.get() != NULL);
     SkASSERT(fPicture != NULL);
     if (NULL == fCanvas.get() || NULL == fPicture) {
         return false;
     }

     fCanvas->drawPicture(*fPicture);
     fCanvas->flush();
     return path != NULL && write(fCanvas, *path);
 }

 ///////////////////////////////////////////////////////////////////////////////////////////////

 TiledPictureRenderer::TiledPictureRenderer()
     : fUsePipe(false)
     , fTileWidth(kDefaultTileWidth)
     , fTileHeight(kDefaultTileHeight)
     , fTileWidthPercentage(0.0)
     , fTileHeightPercentage(0.0)
     , fTileMinPowerOf2Width(0)
     , fTileCounter(0)
     , fNumThreads(1)
     , fPictureClones(NULL)
     , fPipeController(NULL) { }

 void TiledPictureRenderer::init(SkPicture* pict) {
     SkASSERT(pict != NULL);
     SkASSERT(0 == fTileRects.count());
     if (NULL == pict || fTileRects.count() != 0) {
         return;
     }

     // Do not call INHERITED::init(), which would create a (potentially large) canvas which is not
     // used by bench_pictures.
     fPicture = pict;

     if (fTileWidthPercentage > 0) {
         fTileWidth = sk_float_ceil2int(float(fTileWidthPercentage * fPicture->width() / 100));
     }
     if (fTileHeightPercentage > 0) {
         fTileHeight = sk_float_ceil2int(float(fTileHeightPercentage * fPicture->height() / 100));
     }

     if (fTileMinPowerOf2Width > 0) {
         this->setupPowerOf2Tiles();
     } else {
         this->setupTiles();
     }

     if (this->multiThreaded()) {
         for (int i = 0; i < fNumThreads; ++i) {
             *fCanvasPool.append() = this->setupCanvas(fTileWidth, fTileHeight);
         }
         if (!fUsePipe) {
             SkASSERT(NULL == fPictureClones);
             // Only need to create fNumThreads - 1 clones, since one thread will use the base
             // picture.
             int numberOfClones = fNumThreads - 1;
             // This will be deleted in end().
             fPictureClones = SkNEW_ARRAY(SkPicture, numberOfClones);
             fPicture->clone(fPictureClones, numberOfClones);
         }
     }
 }

 void TiledPictureRenderer::end() {
     fTileRects.reset();
     SkDELETE_ARRAY(fPictureClones);
     fPictureClones = NULL;
     fCanvasPool.unrefAll();
     if (fPipeController != NULL) {
         SkASSERT(fUsePipe);
         SkDELETE(fPipeController);
         fPipeController = NULL;
     }
     this->INHERITED::end();
 }

 TiledPictureRenderer::~TiledPictureRenderer() {
     // end() must be called to delete fPictureClones and fPipeController
     SkASSERT(NULL == fPictureClones);
     SkASSERT(NULL == fPipeController);
 }

 void TiledPictureRenderer::setupTiles() {
     for (int tile_y_start = 0; tile_y_start < fPicture->height(); tile_y_start += fTileHeight) {
         for (int tile_x_start = 0; tile_x_start < fPicture->width(); tile_x_start += fTileWidth) {
             *fTileRects.append() = SkRect::MakeXYWH(SkIntToScalar(tile_x_start),
                                                     SkIntToScalar(tile_y_start),
                                                     SkIntToScalar(fTileWidth),
                                                     SkIntToScalar(fTileHeight));
         }
     }
 }

 // The goal of the powers of two tiles is to minimize the amount of wasted tile
 // space in the width-wise direction and then minimize the number of tiles. The
 // constraints are that every tile must have a pixel width that is a power of
 // two and also be of some minimal width (that is also a power of two).
 //
 // This is solved by first taking our picture size and rounding it up to the
 // multiple of the minimal width. The binary representation of this rounded
 // value gives us the tiles we need: a bit of value one means we need a tile of
 // that size.
 void TiledPictureRenderer::setupPowerOf2Tiles() {
     int rounded_value = fPicture->width();
     if (fPicture->width() % fTileMinPowerOf2Width != 0) {
         rounded_value = fPicture->width() - (fPicture->width() % fTileMinPowerOf2Width)
             + fTileMinPowerOf2Width;
     }

     int num_bits = SkScalarCeilToInt(SkScalarLog2(SkIntToScalar(fPicture->width())));
     int largest_possible_tile_size = 1 << num_bits;

     // The tile height is constant for a particular picture.
     for (int tile_y_start = 0; tile_y_start < fPicture->height(); tile_y_start += fTileHeight) {
         int tile_x_start = 0;
         int current_width = largest_possible_tile_size;
         // Set fTileWidth to be the width of the widest tile, so that each canvas is large enough
         // to draw each tile.
         fTileWidth = current_width;

         while (current_width >= fTileMinPowerOf2Width) {
             // It is very important this is a bitwise AND.
             if (current_width & rounded_value) {
                 *fTileRects.append() = SkRect::MakeXYWH(SkIntToScalar(tile_x_start),
                                                         SkIntToScalar(tile_y_start),
                                                         SkIntToScalar(current_width),
                                                         SkIntToScalar(fTileHeight));
                 tile_x_start += current_width;
             }

             current_width >>= 1;
         }
     }
 }

 /**
  * Draw the specified playback to the canvas translated to rectangle provided, so that this mini
  * canvas represents the rectangle's portion of the overall picture.
  * Saves and restores so that the initial clip and matrix return to their state before this function
  * is called.
  */
 template<class T>
 static void DrawTileToCanvas(SkCanvas* canvas, const SkRect& tileRect, T* playback) {
     int saveCount = canvas->save();
     // Translate so that we draw the correct portion of the picture
     canvas->translate(-tileRect.fLeft, -tileRect.fTop);
     playback->draw(canvas);
     canvas->restoreToCount(saveCount);
     canvas->flush();
 }

 ///////////////////////////////////////////////////////////////////////////////////////////////
 // Base class for data used both by pipe and clone picture multi threaded drawing.

 struct ThreadData {
     ThreadData(SkCanvas* target, int* tileCounter, SkTDArray<SkRect>* tileRects,
                const SkString* path, bool* success)
     : fCanvas(target)
     , fPath(path)
     , fSuccess(success)
     , fTileCounter(tileCounter)
     , fTileRects(tileRects) {
         SkASSERT(target != NULL && tileCounter != NULL && tileRects != NULL);
         // Success must start off true, and it will be set to false upon failure.
         SkASSERT(success != NULL && *success);
     }

     int32_t nextTile(SkRect* rect) {
         int32_t i = sk_atomic_inc(fTileCounter);
         if (i < fTileRects->count()) {
             SkASSERT(rect != NULL);
             *rect = fTileRects->operator[](i);
             return i;
         }
         return -1;
     }

     // All of these are pointers to objects owned elsewhere
     SkCanvas*                fCanvas;
     const SkString*          fPath;
     bool*                    fSuccess;
 private:
     // Shared by all threads, this states which is the next tile to be drawn.
     int32_t*                 fTileCounter;
     // Points to the array of rectangles. The array is already created before any threads are
     // started and then it is unmodified, so there is no danger of race conditions.
     const SkTDArray<SkRect>* fTileRects;
 };

 ///////////////////////////////////////////////////////////////////////////////////////////////
 // Draw using Pipe

 struct TileData : public ThreadData {
     TileData(ThreadSafePipeController* controller, SkCanvas* canvas, int* tileCounter,
              SkTDArray<SkRect>* tileRects, const SkString* path, bool* success)
     : INHERITED(canvas, tileCounter, tileRects, path, success)
     , fController(controller) {}

     ThreadSafePipeController* fController;

     typedef ThreadData INHERITED;
 };

 static void DrawTile(void* data) {
     SkGraphics::SetTLSFontCacheLimit(1 * 1024 * 1024);
     TileData* tileData = static_cast<TileData*>(data);

     SkRect tileRect;
     int32_t i;
     while ((i = tileData->nextTile(&tileRect)) != -1) {
         DrawTileToCanvas(tileData->fCanvas, tileRect, tileData->fController);
         if (!writeAppendNumber(tileData->fCanvas, tileData->fPath, i)) {
             *tileData->fSuccess = false;
             break;
         }
     }
     SkDELETE(tileData);
 }

 ///////////////////////////////////////////////////////////////////////////////////////////////
 // Draw using Picture

 struct CloneData : public ThreadData {
     CloneData(SkPicture* clone, SkCanvas* target, int* tileCounter, SkTDArray<SkRect>* tileRects,
               const SkString* path, bool* success)
     : INHERITED(target, tileCounter, tileRects, path, success)
     , fClone(clone) {}

     SkPicture* fClone;

     typedef ThreadData INHERITED;
 };

 static void DrawClonedTiles(void* data) {
     SkGraphics::SetTLSFontCacheLimit(1 * 1024 * 1024);
     CloneData* cloneData = static_cast<CloneData*>(data);

     SkRect tileRect;
     int32_t i;
     while ((i = cloneData->nextTile(&tileRect)) != -1) {
         DrawTileToCanvas(cloneData->fCanvas, tileRect, cloneData->fClone);
         if (!writeAppendNumber(cloneData->fCanvas, cloneData->fPath, i)) {
             *cloneData->fSuccess = false;
             break;
         }
     }
     SkDELETE(cloneData);
 }

 ///////////////////////////////////////////////////////////////////////////////////////////////

 void TiledPictureRenderer::setup() {
     if (this->multiThreaded()) {
         // Reset to zero so we start with the first tile.
         fTileCounter = 0;
         if (fUsePipe) {
             // Record the picture into the pipe controller. It is done here because unlike
             // SkPicture, the pipe is modified (bitmaps can be removed) by drawing.
             // fPipeController is deleted here after each call to render() except the last one and
             // in end() for the last one.
             if (fPipeController != NULL) {
                 SkDELETE(fPipeController);
             }
             fPipeController = SkNEW_ARGS(ThreadSafePipeController, (fTileRects.count()));
             SkGPipeWriter writer;
             SkCanvas* pipeCanvas = writer.startRecording(fPipeController,
                                                          SkGPipeWriter::kSimultaneousReaders_Flag);
             SkASSERT(fPicture != NULL);
             fPicture->draw(pipeCanvas);
             writer.endRecording();
         }
     }
 }

 bool TiledPictureRenderer::render(const SkString* path) {
     SkASSERT(fPicture != NULL);
     if (NULL == fPicture) {
         return false;
     }

     if (this->multiThreaded()) {
         SkASSERT(fCanvasPool.count() == fNumThreads);
         SkTDArray<SkThread*> threads;
         SkThread::entryPointProc proc = fUsePipe ? DrawTile : DrawClonedTiles;
         bool success = true;
         for (int i = 0; i < fNumThreads; ++i) {
             // data will be deleted by the entryPointProc.
             ThreadData* data;
             if (fUsePipe) {
                 data = SkNEW_ARGS(TileData, (fPipeController, fCanvasPool[i], &fTileCounter,
                                              &fTileRects, path, &success));
             } else {
                 SkPicture* pic = (0 == i) ? fPicture : &fPictureClones[i-1];
                 data = SkNEW_ARGS(CloneData, (pic, fCanvasPool[i], &fTileCounter, &fTileRects, path,
                                               &success));
             }
             SkThread* thread = SkNEW_ARGS(SkThread, (proc, data));
             if (!thread->start()) {
                 SkDebugf("Could not start %s thread %i.\n", (fUsePipe ? "pipe" : "picture"), i);
             }
             *threads.append() = thread;
         }
         SkASSERT(threads.count() == fNumThreads);
         for (int i = 0; i < fNumThreads; ++i) {
             SkThread* thread = threads[i];
             thread->join();
             SkDELETE(thread);
         }
         threads.reset();
         return success;
     } else {
         // For single thread, we really only need one canvas total.
         SkCanvas* canvas = this->setupCanvas(fTileWidth, fTileHeight);
         SkAutoUnref aur(canvas);

         for (int i = 0; i < fTileRects.count(); ++i) {
             DrawTileToCanvas(canvas, fTileRects[i], fPicture);
             if (!writeAppendNumber(canvas, path, i)) {
                 return false;
             }
         }
         return path != NULL;
     }
 }

 SkCanvas* TiledPictureRenderer::setupCanvas(int width, int height) {
     SkCanvas* canvas = this->INHERITED::setupCanvas(width, height);
     SkASSERT(fPicture != NULL);
     // Clip the tile to an area that is completely in what the SkPicture says is the
     // drawn-to area. This is mostly important for tiles on the right and bottom edges
     // as they may go over this area and the picture may have some commands that
     // draw outside of this area and so should not actually be written.
     SkRect clip = SkRect::MakeWH(SkIntToScalar(fPicture->width()),
                                  SkIntToScalar(fPicture->height()));
     canvas->clipRect(clip);
     return canvas;
 }

 ///////////////////////////////////////////////////////////////////////////////////////////////

 void PlaybackCreationRenderer::setup() {
     SkCanvas* recorder = fReplayer.beginRecording(fPicture->width(), fPicture->height());
     fPicture->draw(recorder);
 }

 bool PlaybackCreationRenderer::render(const SkString*) {
     fReplayer.endRecording();
     // Since this class does not actually render, return false.
     return false;
 }

 }
	/*
	* Copyright 2012 Google Inc.
	*
	* Use of this source code is governed by a BSD-style license that can be
	* found in the LICENSE file.
	*/

	#include "PictureRenderer.h"
	#include "picture_utils.h"
	#include "SamplePipeControllers.h"
	#include "SkCanvas.h"
	#include "SkDevice.h"
	#include "SkGPipe.h"
	#if SK_SUPPORT_GPU
	#include "SkGpuDevice.h"
	#endif
	#include "SkGraphics.h"
	#include "SkImageEncoder.h"
	#include "SkMatrix.h"
	#include "SkPicture.h"
	#include "SkScalar.h"
	#include "SkString.h"
	#include "SkTemplates.h"
	#include "SkTDArray.h"
	#include "SkThreadUtils.h"
	#include "SkTypes.h"

	namespace sk_tools {

	enum {
	kDefaultTileWidth = 256,
	kDefaultTileHeight = 256
	};

	void PictureRenderer::init(SkPicture* pict) {
	SkASSERT(NULL == fPicture);
	SkASSERT(NULL == fCanvas.get());
	if (fPicture != NULL \|\| NULL != fCanvas.get()) {
	return;
	}

	SkASSERT(pict != NULL);
	if (NULL == pict) {
	return;
	}

	fPicture = pict;
	fCanvas.reset(this->setupCanvas());
	}

	SkCanvas* PictureRenderer::setupCanvas() {
	return this->setupCanvas(fPicture->width(), fPicture->height());
	}

	SkCanvas* PictureRenderer::setupCanvas(int width, int height) {
	switch(fDeviceType) {
	case kBitmap_DeviceType: {
	SkBitmap bitmap;
	sk_tools::setup_bitmap(&bitmap, width, height);
	return SkNEW_ARGS(SkCanvas, (bitmap));
	break;
	}
	#if SK_SUPPORT_GPU
	case kGPU_DeviceType: {
	SkAutoTUnref<SkGpuDevice> device(SkNEW_ARGS(SkGpuDevice,
	(fGrContext, SkBitmap::kARGB_8888_Config,
	width, height)));
	return SkNEW_ARGS(SkCanvas, (device.get()));
	break;
	}
	#endif
	default:
	SkASSERT(0);
	}

	return NULL;
	}

	void PictureRenderer::end() {
	this->resetState();
	fPicture = NULL;
	fCanvas.reset(NULL);
	}

	void PictureRenderer::resetState() {
	#if SK_SUPPORT_GPU
	if (this->isUsingGpuDevice()) {
	SkGLContext* glContext = fGrContextFactory.getGLContext(
	GrContextFactory::kNative_GLContextType);

	SkASSERT(glContext != NULL);
	if (NULL == glContext) {
	return;
	}

	fGrContext->flush();
	SK_GL(*glContext, Finish());
	}
	#endif
	}

	/**
	* Write the canvas to the specified path.
	* @param canvas Must be non-null. Canvas to be written to a file.
	* @param path Path for the file to be written. Should have no extension; write() will append
	* an appropriate one. Passed in by value so it can be modified.
	* @return bool True if the Canvas is written to a file.
	*/
	static bool write(SkCanvas* canvas, SkString path) {
	SkASSERT(canvas != NULL);
	if (NULL == canvas) {
	return false;
	}

	SkBitmap bitmap;
	SkISize size = canvas->getDeviceSize();
	sk_tools::setup_bitmap(&bitmap, size.width(), size.height());

	canvas->readPixels(&bitmap, 0, 0);
	sk_tools::force_all_opaque(bitmap);

	// Since path is passed in by value, it is okay to modify it.
	path.append(".png");
	return SkImageEncoder::EncodeFile(path.c_str(), bitmap, SkImageEncoder::kPNG_Type, 100);
	}

	/**
	* If path is non NULL, append number to it, and call write(SkCanvas*, SkString) to write the
	* provided canvas to a file. Returns true if path is NULL or if write() succeeds.
	*/
	static bool writeAppendNumber(SkCanvas* canvas, const SkString* path, int number) {
	if (NULL == path) {
	return true;
	}
	SkString pathWithNumber(*path);
	pathWithNumber.appendf("%i", number);
	return write(canvas, pathWithNumber);
	}

	///////////////////////////////////////////////////////////////////////////////////////////////

	bool RecordPictureRenderer::render(const SkString*) {
	SkPicture replayer;
	SkCanvas* recorder = replayer.beginRecording(fPicture->width(), fPicture->height());
	fPicture->draw(recorder);
	replayer.endRecording();
	// Since this class does not actually render, return false.
	return false;
	}

	///////////////////////////////////////////////////////////////////////////////////////////////

	bool PipePictureRenderer::render(const SkString* path) {
	SkASSERT(fCanvas.get() != NULL);
	SkASSERT(fPicture != NULL);
	if (NULL == fCanvas.get() \|\| NULL == fPicture) {
	return false;
	}

	PipeController pipeController(fCanvas.get());
	SkGPipeWriter writer;
	SkCanvas* pipeCanvas = writer.startRecording(&pipeController);
	pipeCanvas->drawPicture(*fPicture);
	writer.endRecording();
	fCanvas->flush();
	return path != NULL && write(fCanvas, *path);
	}

	///////////////////////////////////////////////////////////////////////////////////////////////

	bool SimplePictureRenderer::render(const SkString* path) {
	SkASSERT(fCanvas.get() != NULL);
	SkASSERT(fPicture != NULL);
	if (NULL == fCanvas.get() \|\| NULL == fPicture) {
	return false;
	}

	fCanvas->drawPicture(*fPicture);
	fCanvas->flush();
	return path != NULL && write(fCanvas, *path);
	}

	///////////////////////////////////////////////////////////////////////////////////////////////

	TiledPictureRenderer::TiledPictureRenderer()
	: fUsePipe(false)
	, fTileWidth(kDefaultTileWidth)
	, fTileHeight(kDefaultTileHeight)
	, fTileWidthPercentage(0.0)
	, fTileHeightPercentage(0.0)
	, fTileMinPowerOf2Width(0)
	, fTileCounter(0)
	, fNumThreads(1)
	, fPictureClones(NULL)
	, fPipeController(NULL) { }

	void TiledPictureRenderer::init(SkPicture* pict) {
	SkASSERT(pict != NULL);
	SkASSERT(0 == fTileRects.count());
	if (NULL == pict \|\| fTileRects.count() != 0) {
	return;
	}

	// Do not call INHERITED::init(), which would create a (potentially large) canvas which is not
	// used by bench_pictures.
	fPicture = pict;

	if (fTileWidthPercentage > 0) {
	fTileWidth = sk_float_ceil2int(float(fTileWidthPercentage * fPicture->width() / 100));
	}
	if (fTileHeightPercentage > 0) {
	fTileHeight = sk_float_ceil2int(float(fTileHeightPercentage * fPicture->height() / 100));
	}

	if (fTileMinPowerOf2Width > 0) {
	this->setupPowerOf2Tiles();
	} else {
	this->setupTiles();
	}

	if (this->multiThreaded()) {
	for (int i = 0; i < fNumThreads; ++i) {
	*fCanvasPool.append() = this->setupCanvas(fTileWidth, fTileHeight);
	}
	if (!fUsePipe) {
	SkASSERT(NULL == fPictureClones);
	// Only need to create fNumThreads - 1 clones, since one thread will use the base
	// picture.
	int numberOfClones = fNumThreads - 1;
	// This will be deleted in end().
	fPictureClones = SkNEW_ARRAY(SkPicture, numberOfClones);
	fPicture->clone(fPictureClones, numberOfClones);
	}
	}
	}

	void TiledPictureRenderer::end() {
	fTileRects.reset();
	SkDELETE_ARRAY(fPictureClones);
	fPictureClones = NULL;
	fCanvasPool.unrefAll();
	if (fPipeController != NULL) {
	SkASSERT(fUsePipe);
	SkDELETE(fPipeController);
	fPipeController = NULL;
	}
	this->INHERITED::end();
	}

	TiledPictureRenderer::~TiledPictureRenderer() {
	// end() must be called to delete fPictureClones and fPipeController
	SkASSERT(NULL == fPictureClones);
	SkASSERT(NULL == fPipeController);
	}

	void TiledPictureRenderer::setupTiles() {
	for (int tile_y_start = 0; tile_y_start < fPicture->height(); tile_y_start += fTileHeight) {
	for (int tile_x_start = 0; tile_x_start < fPicture->width(); tile_x_start += fTileWidth) {
	*fTileRects.append() = SkRect::MakeXYWH(SkIntToScalar(tile_x_start),
	SkIntToScalar(tile_y_start),
	SkIntToScalar(fTileWidth),
	SkIntToScalar(fTileHeight));
	}
	}
	}

	// The goal of the powers of two tiles is to minimize the amount of wasted tile
	// space in the width-wise direction and then minimize the number of tiles. The
	// constraints are that every tile must have a pixel width that is a power of
	// two and also be of some minimal width (that is also a power of two).
	//
	// This is solved by first taking our picture size and rounding it up to the
	// multiple of the minimal width. The binary representation of this rounded
	// value gives us the tiles we need: a bit of value one means we need a tile of
	// that size.
	void TiledPictureRenderer::setupPowerOf2Tiles() {
	int rounded_value = fPicture->width();
	if (fPicture->width() % fTileMinPowerOf2Width != 0) {
	rounded_value = fPicture->width() - (fPicture->width() % fTileMinPowerOf2Width)
	+ fTileMinPowerOf2Width;
	}

	int num_bits = SkScalarCeilToInt(SkScalarLog2(SkIntToScalar(fPicture->width())));
	int largest_possible_tile_size = 1 << num_bits;

	// The tile height is constant for a particular picture.
	for (int tile_y_start = 0; tile_y_start < fPicture->height(); tile_y_start += fTileHeight) {
	int tile_x_start = 0;
	int current_width = largest_possible_tile_size;
	// Set fTileWidth to be the width of the widest tile, so that each canvas is large enough
	// to draw each tile.
	fTileWidth = current_width;

	while (current_width >= fTileMinPowerOf2Width) {
	// It is very important this is a bitwise AND.
	if (current_width & rounded_value) {
	*fTileRects.append() = SkRect::MakeXYWH(SkIntToScalar(tile_x_start),
	SkIntToScalar(tile_y_start),
	SkIntToScalar(current_width),
	SkIntToScalar(fTileHeight));
	tile_x_start += current_width;
	}

	current_width >>= 1;
	}
	}
	}

	/**
	* Draw the specified playback to the canvas translated to rectangle provided, so that this mini
	* canvas represents the rectangle's portion of the overall picture.
	* Saves and restores so that the initial clip and matrix return to their state before this function
	* is called.
	*/
	template<class T>
	static void DrawTileToCanvas(SkCanvas* canvas, const SkRect& tileRect, T* playback) {
	int saveCount = canvas->save();
	// Translate so that we draw the correct portion of the picture
	canvas->translate(-tileRect.fLeft, -tileRect.fTop);
	playback->draw(canvas);
	canvas->restoreToCount(saveCount);
	canvas->flush();
	}

	///////////////////////////////////////////////////////////////////////////////////////////////
	// Base class for data used both by pipe and clone picture multi threaded drawing.

	struct ThreadData {
	ThreadData(SkCanvas* target, int* tileCounter, SkTDArray<SkRect>* tileRects,
	const SkString* path, bool* success)
	: fCanvas(target)
	, fPath(path)
	, fSuccess(success)
	, fTileCounter(tileCounter)
	, fTileRects(tileRects) {
	SkASSERT(target != NULL && tileCounter != NULL && tileRects != NULL);
	// Success must start off true, and it will be set to false upon failure.
	SkASSERT(success != NULL && *success);
	}

	int32_t nextTile(SkRect* rect) {
	int32_t i = sk_atomic_inc(fTileCounter);
	if (i < fTileRects->count()) {
	SkASSERT(rect != NULL);
	*rect = fTileRects->operator[](i);
	return i;
	}
	return -1;
	}

	// All of these are pointers to objects owned elsewhere
	SkCanvas* fCanvas;
	const SkString* fPath;
	bool* fSuccess;
	private:
	// Shared by all threads, this states which is the next tile to be drawn.
	int32_t* fTileCounter;
	// Points to the array of rectangles. The array is already created before any threads are
	// started and then it is unmodified, so there is no danger of race conditions.
	const SkTDArray<SkRect>* fTileRects;
	};

	///////////////////////////////////////////////////////////////////////////////////////////////
	// Draw using Pipe

	struct TileData : public ThreadData {
	TileData(ThreadSafePipeController* controller, SkCanvas* canvas, int* tileCounter,
	SkTDArray<SkRect>* tileRects, const SkString* path, bool* success)
	: INHERITED(canvas, tileCounter, tileRects, path, success)
	, fController(controller) {}

	ThreadSafePipeController* fController;

	typedef ThreadData INHERITED;
	};

	static void DrawTile(void* data) {
	SkGraphics::SetTLSFontCacheLimit(1 * 1024 * 1024);
	TileData* tileData = static_cast<TileData*>(data);

	SkRect tileRect;
	int32_t i;
	while ((i = tileData->nextTile(&tileRect)) != -1) {
	DrawTileToCanvas(tileData->fCanvas, tileRect, tileData->fController);
	if (!writeAppendNumber(tileData->fCanvas, tileData->fPath, i)) {
	*tileData->fSuccess = false;
	break;
	}
	}
	SkDELETE(tileData);
	}

	///////////////////////////////////////////////////////////////////////////////////////////////
	// Draw using Picture

	struct CloneData : public ThreadData {
	CloneData(SkPicture* clone, SkCanvas* target, int* tileCounter, SkTDArray<SkRect>* tileRects,
	const SkString* path, bool* success)
	: INHERITED(target, tileCounter, tileRects, path, success)
	, fClone(clone) {}

	SkPicture* fClone;

	typedef ThreadData INHERITED;
	};

	static void DrawClonedTiles(void* data) {
	SkGraphics::SetTLSFontCacheLimit(1 * 1024 * 1024);
	CloneData* cloneData = static_cast<CloneData*>(data);

	SkRect tileRect;
	int32_t i;
	while ((i = cloneData->nextTile(&tileRect)) != -1) {
	DrawTileToCanvas(cloneData->fCanvas, tileRect, cloneData->fClone);
	if (!writeAppendNumber(cloneData->fCanvas, cloneData->fPath, i)) {
	*cloneData->fSuccess = false;
	break;
	}
	}
	SkDELETE(cloneData);
	}

	///////////////////////////////////////////////////////////////////////////////////////////////

	void TiledPictureRenderer::setup() {
	if (this->multiThreaded()) {
	// Reset to zero so we start with the first tile.
	fTileCounter = 0;
	if (fUsePipe) {
	// Record the picture into the pipe controller. It is done here because unlike
	// SkPicture, the pipe is modified (bitmaps can be removed) by drawing.
	// fPipeController is deleted here after each call to render() except the last one and
	// in end() for the last one.
	if (fPipeController != NULL) {
	SkDELETE(fPipeController);
	}
	fPipeController = SkNEW_ARGS(ThreadSafePipeController, (fTileRects.count()));
	SkGPipeWriter writer;
	SkCanvas* pipeCanvas = writer.startRecording(fPipeController,
	SkGPipeWriter::kSimultaneousReaders_Flag);
	SkASSERT(fPicture != NULL);
	fPicture->draw(pipeCanvas);
	writer.endRecording();
	}
	}
	}

	bool TiledPictureRenderer::render(const SkString* path) {
	SkASSERT(fPicture != NULL);
	if (NULL == fPicture) {
	return false;
	}

	if (this->multiThreaded()) {
	SkASSERT(fCanvasPool.count() == fNumThreads);
	SkTDArray<SkThread*> threads;
	SkThread::entryPointProc proc = fUsePipe ? DrawTile : DrawClonedTiles;
	bool success = true;
	for (int i = 0; i < fNumThreads; ++i) {
	// data will be deleted by the entryPointProc.
	ThreadData* data;
	if (fUsePipe) {
	data = SkNEW_ARGS(TileData, (fPipeController, fCanvasPool[i], &fTileCounter,
	&fTileRects, path, &success));
	} else {
	SkPicture* pic = (0 == i) ? fPicture : &fPictureClones[i-1];
	data = SkNEW_ARGS(CloneData, (pic, fCanvasPool[i], &fTileCounter, &fTileRects, path,
	&success));
	}
	SkThread* thread = SkNEW_ARGS(SkThread, (proc, data));
	if (!thread->start()) {
	SkDebugf("Could not start %s thread %i.\n", (fUsePipe ? "pipe" : "picture"), i);
	}
	*threads.append() = thread;
	}
	SkASSERT(threads.count() == fNumThreads);
	for (int i = 0; i < fNumThreads; ++i) {
	SkThread* thread = threads[i];
	thread->join();
	SkDELETE(thread);
	}
	threads.reset();
	return success;
	} else {
	// For single thread, we really only need one canvas total.
	SkCanvas* canvas = this->setupCanvas(fTileWidth, fTileHeight);
	SkAutoUnref aur(canvas);

	for (int i = 0; i < fTileRects.count(); ++i) {
	DrawTileToCanvas(canvas, fTileRects[i], fPicture);
	if (!writeAppendNumber(canvas, path, i)) {
	return false;
	}
	}
	return path != NULL;
	}
	}

	SkCanvas* TiledPictureRenderer::setupCanvas(int width, int height) {
	SkCanvas* canvas = this->INHERITED::setupCanvas(width, height);
	SkASSERT(fPicture != NULL);
	// Clip the tile to an area that is completely in what the SkPicture says is the
	// drawn-to area. This is mostly important for tiles on the right and bottom edges
	// as they may go over this area and the picture may have some commands that
	// draw outside of this area and so should not actually be written.
	SkRect clip = SkRect::MakeWH(SkIntToScalar(fPicture->width()),
	SkIntToScalar(fPicture->height()));
	canvas->clipRect(clip);
	return canvas;
	}

	///////////////////////////////////////////////////////////////////////////////////////////////

	void PlaybackCreationRenderer::setup() {
	SkCanvas* recorder = fReplayer.beginRecording(fPicture->width(), fPicture->height());
	fPicture->draw(recorder);
	}

	bool PlaybackCreationRenderer::render(const SkString*) {
	fReplayer.endRecording();
	// Since this class does not actually render, return false.
	return false;
	}

	}