| /* |
| * Copyright (C) 2011 Google Inc. |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include <ctype.h> |
| |
| #include "SkFontHost.h" |
| #include "SkGlyphCache.h" |
| #include "SkPaint.h" |
| #include "SkPDFDevice.h" |
| #include "SkPDFFont.h" |
| #include "SkPDFStream.h" |
| #include "SkPDFTypes.h" |
| #include "SkPDFUtils.h" |
| #include "SkRefCnt.h" |
| #include "SkScalar.h" |
| #include "SkStream.h" |
| #include "SkTypeface.h" |
| #include "SkUtils.h" |
| |
| namespace { |
| |
| bool parsePFBSection(const uint8_t** src, size_t* len, int sectionType, |
| size_t* size) { |
| // PFB sections have a two or six bytes header. 0x80 and a one byte |
| // section type followed by a four byte section length. Type one is |
| // an ASCII section (includes a length), type two is a binary section |
| // (includes a length) and type three is an EOF marker with no length. |
| const uint8_t* buf = *src; |
| if (*len < 2 || buf[0] != 0x80 || buf[1] != sectionType) |
| return false; |
| if (buf[1] == 3) |
| return true; |
| if (*len < 6) |
| return false; |
| |
| *size = buf[2] | (buf[3] << 8) | (buf[4] << 16) | (buf[5] << 24); |
| size_t consumed = *size + 6; |
| if (consumed > *len) |
| return false; |
| *src = *src + consumed; |
| *len = *len - consumed; |
| return true; |
| } |
| |
| bool parsePFB(const uint8_t* src, size_t size, size_t* headerLen, |
| size_t* dataLen, size_t* trailerLen) { |
| const uint8_t* srcPtr = src; |
| size_t remaining = size; |
| |
| return parsePFBSection(&srcPtr, &remaining, 1, headerLen) && |
| parsePFBSection(&srcPtr, &remaining, 2, dataLen) && |
| parsePFBSection(&srcPtr, &remaining, 1, trailerLen) && |
| parsePFBSection(&srcPtr, &remaining, 3, NULL); |
| } |
| |
| /* The sections of a PFA file are implicitly defined. The body starts |
| * after the line containing "eexec," and the trailer starts with 512 |
| * literal 0's followed by "cleartomark" (plus arbitrary white space). |
| * |
| * This function assumes that src is NUL terminated, but the NUL |
| * termination is not included in size. |
| * |
| */ |
| bool parsePFA(const char* src, size_t size, size_t* headerLen, |
| size_t* hexDataLen, size_t* dataLen, size_t* trailerLen) { |
| const char* end = src + size; |
| |
| const char* dataPos = strstr(src, "eexec"); |
| if (!dataPos) |
| return false; |
| dataPos += strlen("eexec"); |
| while ((*dataPos == '\n' || *dataPos == '\r' || *dataPos == ' ') && |
| dataPos < end) |
| dataPos++; |
| *headerLen = dataPos - src; |
| |
| const char* trailerPos = strstr(dataPos, "cleartomark"); |
| if (!trailerPos) |
| return false; |
| int zeroCount = 0; |
| for (trailerPos--; trailerPos > dataPos && zeroCount < 512; trailerPos--) { |
| if (*trailerPos == '\n' || *trailerPos == '\r' || *trailerPos == ' ') { |
| continue; |
| } else if (*trailerPos == '0') { |
| zeroCount++; |
| } else { |
| return false; |
| } |
| } |
| if (zeroCount != 512) |
| return false; |
| |
| *hexDataLen = trailerPos - src - *headerLen; |
| *trailerLen = size - *headerLen - *hexDataLen; |
| |
| // Verify that the data section is hex encoded and count the bytes. |
| int nibbles = 0; |
| for (; dataPos < trailerPos; dataPos++) { |
| if (isspace(*dataPos)) |
| continue; |
| if (!isxdigit(*dataPos)) |
| return false; |
| nibbles++; |
| } |
| *dataLen = (nibbles + 1) / 2; |
| |
| return true; |
| } |
| |
| int8_t hexToBin(uint8_t c) { |
| if (!isxdigit(c)) |
| return -1; |
| if (c <= '9') return c - '0'; |
| if (c <= 'F') return c - 'A' + 10; |
| if (c <= 'f') return c - 'a' + 10; |
| return -1; |
| } |
| |
| SkStream* handleType1Stream(SkStream* srcStream, size_t* headerLen, |
| size_t* dataLen, size_t* trailerLen) { |
| // srcStream may be backed by a file or a unseekable fd, so we may not be |
| // able to use skip(), rewind(), or getMemoryBase(). read()ing through |
| // the input only once is doable, but very ugly. Furthermore, it'd be nice |
| // if the data was NUL terminated so that we can use strstr() to search it. |
| // Make as few copies as possible given these constraints. |
| SkDynamicMemoryWStream dynamicStream; |
| SkRefPtr<SkMemoryStream> staticStream; |
| const uint8_t* src; |
| size_t srcLen; |
| if ((srcLen = srcStream->getLength()) > 0) { |
| staticStream = new SkMemoryStream(srcLen + 1); |
| staticStream->unref(); // new and SkRefPtr both took a ref. |
| src = (const uint8_t*)staticStream->getMemoryBase(); |
| if (srcStream->getMemoryBase() != NULL) { |
| memcpy((void *)src, srcStream->getMemoryBase(), srcLen); |
| } else { |
| size_t read = 0; |
| while (read < srcLen) { |
| size_t got = srcStream->read((void *)staticStream->getAtPos(), |
| srcLen - read); |
| if (got == 0) |
| return NULL; |
| read += got; |
| staticStream->seek(read); |
| } |
| } |
| ((uint8_t *)src)[srcLen] = 0; |
| } else { |
| static const size_t bufSize = 4096; |
| uint8_t buf[bufSize]; |
| size_t amount; |
| while ((amount = srcStream->read(buf, bufSize)) > 0) |
| dynamicStream.write(buf, amount); |
| amount = 0; |
| dynamicStream.write(&amount, 1); // NULL terminator. |
| // getStream makes another copy, but we couldn't do any better. |
| src = (const uint8_t*)dynamicStream.getStream(); |
| srcLen = dynamicStream.getOffset() - 1; |
| } |
| |
| if (parsePFB(src, srcLen, headerLen, dataLen, trailerLen)) { |
| SkMemoryStream* result = |
| new SkMemoryStream(*headerLen + *dataLen + *trailerLen); |
| memcpy((char*)result->getAtPos(), src + 6, *headerLen); |
| result->seek(*headerLen); |
| memcpy((char*)result->getAtPos(), src + 6 + *headerLen + 6, *dataLen); |
| result->seek(*headerLen + *dataLen); |
| memcpy((char*)result->getAtPos(), src + 6 + *headerLen + 6 + *dataLen, |
| *trailerLen); |
| result->rewind(); |
| return result; |
| } |
| |
| // A PFA has to be converted for PDF. |
| size_t hexDataLen; |
| if (parsePFA((const char*)src, srcLen, headerLen, &hexDataLen, dataLen, |
| trailerLen)) { |
| SkMemoryStream* result = |
| new SkMemoryStream(*headerLen + *dataLen + *trailerLen); |
| memcpy((char*)result->getAtPos(), src, *headerLen); |
| result->seek(*headerLen); |
| |
| const uint8_t* hexData = src + *headerLen; |
| const uint8_t* trailer = hexData + hexDataLen; |
| size_t outputOffset = 0; |
| uint8_t dataByte = 0; // To hush compiler. |
| bool highNibble = true; |
| for (; hexData < trailer; hexData++) { |
| char curNibble = hexToBin(*hexData); |
| if (curNibble < 0) |
| continue; |
| if (highNibble) { |
| dataByte = curNibble << 4; |
| highNibble = false; |
| } else { |
| dataByte |= curNibble; |
| highNibble = true; |
| ((char *)result->getAtPos())[outputOffset++] = dataByte; |
| } |
| } |
| if (!highNibble) |
| ((char *)result->getAtPos())[outputOffset++] = dataByte; |
| SkASSERT(outputOffset == *dataLen); |
| result->seek(*headerLen + outputOffset); |
| |
| memcpy((char *)result->getAtPos(), src + *headerLen + hexDataLen, |
| *trailerLen); |
| result->rewind(); |
| return result; |
| } |
| |
| return NULL; |
| } |
| |
| // scale from em-units to base-1000, returning as a SkScalar |
| SkScalar scaleFromFontUnits(int16_t val, uint16_t emSize) { |
| SkScalar scaled = SkIntToScalar(val); |
| if (emSize == 1000) { |
| return scaled; |
| } else { |
| return SkScalarMulDiv(scaled, 1000, emSize); |
| } |
| } |
| |
| void setGlyphWidthAndBoundingBox(SkScalar width, SkIRect box, |
| SkString* content) { |
| // Specify width and bounding box for the glyph. |
| SkPDFScalar::Append(width, content); |
| content->appendf(" 0 %d %d %d %d d1\n", box.fLeft, box.fTop, |
| box.fRight, box.fBottom); |
| } |
| |
| SkPDFArray* makeFontBBox( |
| SkIRect glyphBBox, uint16_t emSize, |
| SkPDFDevice::OriginTransform flipOrigin = |
| SkPDFDevice::kNoFlip_OriginTransform) { |
| if (flipOrigin == SkPDFDevice::kFlip_OriginTransform) { |
| int32_t temp = -glyphBBox.fTop; |
| glyphBBox.fTop = -glyphBBox.fBottom; |
| glyphBBox.fBottom = temp; |
| } |
| SkPDFArray* bbox = new SkPDFArray; |
| bbox->reserve(4); |
| bbox->append(new SkPDFScalar(scaleFromFontUnits(glyphBBox.fLeft, |
| emSize)))->unref(); |
| bbox->append(new SkPDFScalar(scaleFromFontUnits(glyphBBox.fBottom, |
| emSize)))->unref(); |
| bbox->append(new SkPDFScalar(scaleFromFontUnits(glyphBBox.fRight, |
| emSize)))->unref(); |
| bbox->append(new SkPDFScalar(scaleFromFontUnits(glyphBBox.fTop, |
| emSize)))->unref(); |
| return bbox; |
| } |
| |
| SkPDFArray* appendWidth(const int16_t& width, uint16_t emSize, |
| SkPDFArray* array) { |
| array->append(new SkPDFScalar(scaleFromFontUnits(width, emSize)))->unref(); |
| return array; |
| } |
| |
| SkPDFArray* appendVerticalAdvance( |
| const SkAdvancedTypefaceMetrics::VerticalMetric& advance, |
| uint16_t emSize, SkPDFArray* array) { |
| appendWidth(advance.fVerticalAdvance, emSize, array); |
| appendWidth(advance.fOriginXDisp, emSize, array); |
| appendWidth(advance.fOriginYDisp, emSize, array); |
| return array; |
| } |
| |
| template <typename Data> |
| SkPDFArray* composeAdvanceData( |
| SkAdvancedTypefaceMetrics::AdvanceMetric<Data>* advanceInfo, |
| uint16_t emSize, |
| SkPDFArray* (*appendAdvance)(const Data& advance, uint16_t emSize, |
| SkPDFArray* array), |
| Data* defaultAdvance) { |
| SkPDFArray* result = new SkPDFArray(); |
| for (; advanceInfo != NULL; advanceInfo = advanceInfo->fNext.get()) { |
| switch (advanceInfo->fType) { |
| case SkAdvancedTypefaceMetrics::WidthRange::kDefault: { |
| SkASSERT(advanceInfo->fAdvance.count() == 1); |
| *defaultAdvance = advanceInfo->fAdvance[0]; |
| break; |
| } |
| case SkAdvancedTypefaceMetrics::WidthRange::kRange: { |
| SkRefPtr<SkPDFArray> advanceArray = new SkPDFArray(); |
| advanceArray->unref(); // SkRefPtr and new both took a ref. |
| for (int j = 0; j < advanceInfo->fAdvance.count(); j++) |
| appendAdvance(advanceInfo->fAdvance[j], emSize, |
| advanceArray.get()); |
| result->append(new SkPDFInt(advanceInfo->fStartId))->unref(); |
| result->append(advanceArray.get()); |
| break; |
| } |
| case SkAdvancedTypefaceMetrics::WidthRange::kRun: { |
| SkASSERT(advanceInfo->fAdvance.count() == 1); |
| result->append(new SkPDFInt(advanceInfo->fStartId))->unref(); |
| result->append(new SkPDFInt(advanceInfo->fEndId))->unref(); |
| appendAdvance(advanceInfo->fAdvance[0], emSize, result); |
| break; |
| } |
| } |
| } |
| return result; |
| } |
| |
| } // namespace |
| |
| /* Font subset design: It would be nice to be able to subset fonts |
| * (particularly type 3 fonts), but it's a lot of work and not a priority. |
| * |
| * Resources are canonicalized and uniqueified by pointer so there has to be |
| * some additional state indicating which subset of the font is used. It |
| * must be maintained at the page granularity and then combined at the document |
| * granularity. a) change SkPDFFont to fill in its state on demand, kind of |
| * like SkPDFGraphicState. b) maintain a per font glyph usage class in each |
| * page/pdf device. c) in the document, retrieve the per font glyph usage |
| * from each page and combine it and ask for a resource with that subset. |
| */ |
| |
| SkPDFFont::~SkPDFFont() { |
| SkAutoMutexAcquire lock(canonicalFontsMutex()); |
| int index; |
| if (find(SkTypeface::UniqueID(fTypeface.get()), fFirstGlyphID, &index)) { |
| canonicalFonts().removeShuffle(index); |
| #ifdef SK_DEBUG |
| SkASSERT(!fDescendant); |
| } else { |
| SkASSERT(fDescendant); |
| #endif |
| } |
| fResources.unrefAll(); |
| } |
| |
| void SkPDFFont::getResources(SkTDArray<SkPDFObject*>* resourceList) { |
| resourceList->setReserve(resourceList->count() + fResources.count()); |
| for (int i = 0; i < fResources.count(); i++) { |
| resourceList->push(fResources[i]); |
| fResources[i]->ref(); |
| fResources[i]->getResources(resourceList); |
| } |
| } |
| |
| SkTypeface* SkPDFFont::typeface() { |
| return fTypeface.get(); |
| } |
| |
| bool SkPDFFont::hasGlyph(uint16_t id) { |
| return (id >= fFirstGlyphID && id <= fLastGlyphID) || id == 0; |
| } |
| |
| bool SkPDFFont::multiByteGlyphs() { |
| return fMultiByteGlyphs; |
| } |
| |
| size_t SkPDFFont::glyphsToPDFFontEncoding(uint16_t* glyphIDs, |
| size_t numGlyphs) { |
| // A font with multibyte glyphs will support all glyph IDs in a single font. |
| if (fMultiByteGlyphs) { |
| return numGlyphs; |
| } |
| |
| for (size_t i = 0; i < numGlyphs; i++) { |
| if (glyphIDs[i] == 0) { |
| continue; |
| } |
| if (glyphIDs[i] < fFirstGlyphID || glyphIDs[i] > fLastGlyphID) { |
| return i; |
| } |
| glyphIDs[i] -= (fFirstGlyphID - 1); |
| } |
| |
| return numGlyphs; |
| } |
| |
| // static |
| SkPDFFont* SkPDFFont::getFontResource(SkTypeface* typeface, uint16_t glyphID) { |
| SkAutoMutexAcquire lock(canonicalFontsMutex()); |
| const uint32_t fontID = SkTypeface::UniqueID(typeface); |
| int index; |
| if (find(fontID, glyphID, &index)) { |
| canonicalFonts()[index].fFont->ref(); |
| return canonicalFonts()[index].fFont; |
| } |
| |
| SkRefPtr<SkAdvancedTypefaceMetrics> fontInfo; |
| SkPDFDict* fontDescriptor = NULL; |
| if (index >= 0) { |
| SkPDFFont* relatedFont = canonicalFonts()[index].fFont; |
| SkASSERT(relatedFont->fFontInfo.get()); |
| fontInfo = relatedFont->fFontInfo; |
| fontDescriptor = relatedFont->fDescriptor.get(); |
| } else { |
| fontInfo = SkFontHost::GetAdvancedTypefaceMetrics(fontID, true); |
| SkSafeUnref(fontInfo.get()); // SkRefPtr and Get both took a reference. |
| } |
| |
| SkPDFFont* font = new SkPDFFont(fontInfo.get(), typeface, glyphID, false, |
| fontDescriptor); |
| FontRec newEntry(font, fontID, font->fFirstGlyphID); |
| index = canonicalFonts().count(); |
| canonicalFonts().push(newEntry); |
| return font; // Return the reference new SkPDFFont() created. |
| } |
| |
| // static |
| SkTDArray<SkPDFFont::FontRec>& SkPDFFont::canonicalFonts() { |
| // This initialization is only thread safe with gcc. |
| static SkTDArray<FontRec> gCanonicalFonts; |
| return gCanonicalFonts; |
| } |
| |
| // static |
| SkMutex& SkPDFFont::canonicalFontsMutex() { |
| // This initialization is only thread safe with gcc. |
| static SkMutex gCanonicalFontsMutex; |
| return gCanonicalFontsMutex; |
| } |
| |
| // static |
| bool SkPDFFont::find(uint32_t fontID, uint16_t glyphID, int* index) { |
| // TODO(vandebo) optimize this, do only one search? |
| FontRec search(NULL, fontID, glyphID); |
| *index = canonicalFonts().find(search); |
| if (*index >= 0) |
| return true; |
| search.fGlyphID = 0; |
| *index = canonicalFonts().find(search); |
| return false; |
| } |
| |
| SkPDFFont::SkPDFFont(class SkAdvancedTypefaceMetrics* fontInfo, |
| SkTypeface* typeface, |
| uint16_t glyphID, |
| bool descendantFont, |
| SkPDFDict* fontDescriptor) |
| : SkPDFDict("Font"), |
| fTypeface(typeface), |
| #ifdef SK_DEBUG |
| fDescendant(descendantFont), |
| #endif |
| fMultiByteGlyphs(false), |
| fFirstGlyphID(1), |
| fLastGlyphID(fontInfo ? fontInfo->fLastGlyphID : 0), |
| fFontInfo(fontInfo), |
| fDescriptor(fontDescriptor) { |
| |
| SkAdvancedTypefaceMetrics::FontType type; |
| if (fontInfo) { |
| type = fontInfo->fType; |
| } else { |
| type = SkAdvancedTypefaceMetrics::kNotEmbeddable_Font; |
| } |
| |
| if (fontInfo && fontInfo->fMultiMaster) { |
| SkASSERT(false); // Not supported yet. |
| fontInfo->fType = SkAdvancedTypefaceMetrics::kOther_Font; |
| } |
| if (type == SkAdvancedTypefaceMetrics::kType1CID_Font || |
| type == SkAdvancedTypefaceMetrics::kTrueType_Font) { |
| if (descendantFont) { |
| populateCIDFont(); |
| } else { |
| populateType0Font(); |
| } |
| // No need to hold onto the font info for fonts types that |
| // support multibyte glyphs. |
| fFontInfo = NULL; |
| return; |
| } |
| |
| if (type == SkAdvancedTypefaceMetrics::kType1_Font && |
| populateType1Font(glyphID)) { |
| return; |
| } |
| |
| SkASSERT(type == SkAdvancedTypefaceMetrics::kType1_Font || |
| type == SkAdvancedTypefaceMetrics::kCFF_Font || |
| type == SkAdvancedTypefaceMetrics::kOther_Font || |
| type == SkAdvancedTypefaceMetrics::kNotEmbeddable_Font); |
| populateType3Font(glyphID); |
| } |
| |
| void SkPDFFont::populateType0Font() { |
| // TODO(vandebo) add a ToUnicode mapping. |
| fMultiByteGlyphs = true; |
| |
| insert("Subtype", new SkPDFName("Type0"))->unref(); |
| insert("BaseFont", new SkPDFName(fFontInfo->fFontName))->unref(); |
| insert("Encoding", new SkPDFName("Identity-H"))->unref(); |
| |
| SkRefPtr<SkPDFArray> descendantFonts = new SkPDFArray(); |
| descendantFonts->unref(); // SkRefPtr and new took a reference. |
| |
| // Pass ref new created to fResources. |
| fResources.push( |
| new SkPDFFont(fFontInfo.get(), fTypeface.get(), 1, true, NULL)); |
| descendantFonts->append(new SkPDFObjRef(fResources.top()))->unref(); |
| insert("DescendantFonts", descendantFonts.get()); |
| } |
| |
| void SkPDFFont::populateCIDFont() { |
| fMultiByteGlyphs = true; |
| insert("BaseFont", new SkPDFName(fFontInfo->fFontName))->unref(); |
| |
| if (fFontInfo->fType == SkAdvancedTypefaceMetrics::kType1CID_Font) { |
| insert("Subtype", new SkPDFName("CIDFontType0"))->unref(); |
| } else if (fFontInfo->fType == SkAdvancedTypefaceMetrics::kTrueType_Font) { |
| insert("Subtype", new SkPDFName("CIDFontType2"))->unref(); |
| } else { |
| SkASSERT(false); |
| } |
| |
| SkRefPtr<SkPDFDict> sysInfo = new SkPDFDict; |
| sysInfo->unref(); // SkRefPtr and new both took a reference. |
| sysInfo->insert("Registry", new SkPDFString("Adobe"))->unref(); |
| sysInfo->insert("Ordering", new SkPDFString("Identity"))->unref(); |
| sysInfo->insert("Supplement", new SkPDFInt(0))->unref(); |
| insert("CIDSystemInfo", sysInfo.get()); |
| |
| addFontDescriptor(0); |
| |
| if (fFontInfo->fGlyphWidths.get()) { |
| int16_t defaultWidth = 0; |
| SkRefPtr<SkPDFArray> widths = |
| composeAdvanceData(fFontInfo->fGlyphWidths.get(), |
| fFontInfo->fEmSize, &appendWidth, &defaultWidth); |
| widths->unref(); // SkRefPtr and compose both took a reference. |
| if (widths->size()) |
| insert("W", widths.get()); |
| if (defaultWidth != 0) { |
| insert("DW", new SkPDFScalar(scaleFromFontUnits( |
| defaultWidth, fFontInfo->fEmSize)))->unref(); |
| } |
| } |
| if (fFontInfo->fVerticalMetrics.get()) { |
| struct SkAdvancedTypefaceMetrics::VerticalMetric defaultAdvance; |
| defaultAdvance.fVerticalAdvance = 0; |
| defaultAdvance.fOriginXDisp = 0; |
| defaultAdvance.fOriginYDisp = 0; |
| SkRefPtr<SkPDFArray> advances = |
| composeAdvanceData(fFontInfo->fVerticalMetrics.get(), |
| fFontInfo->fEmSize, &appendVerticalAdvance, |
| &defaultAdvance); |
| advances->unref(); // SkRefPtr and compose both took a ref. |
| if (advances->size()) |
| insert("W2", advances.get()); |
| if (defaultAdvance.fVerticalAdvance || |
| defaultAdvance.fOriginXDisp || |
| defaultAdvance.fOriginYDisp) { |
| insert("DW2", appendVerticalAdvance(defaultAdvance, |
| fFontInfo->fEmSize, |
| new SkPDFArray))->unref(); |
| } |
| } |
| } |
| |
| bool SkPDFFont::populateType1Font(int16_t glyphID) { |
| SkASSERT(!fFontInfo->fVerticalMetrics.get()); |
| SkASSERT(fFontInfo->fGlyphWidths.get()); |
| |
| adjustGlyphRangeForSingleByteEncoding(glyphID); |
| |
| int16_t defaultWidth = 0; |
| const SkAdvancedTypefaceMetrics::WidthRange* widthRangeEntry = NULL; |
| const SkAdvancedTypefaceMetrics::WidthRange* widthEntry; |
| for (widthEntry = fFontInfo.get()->fGlyphWidths.get(); |
| widthEntry != NULL; |
| widthEntry = widthEntry->fNext.get()) { |
| switch (widthEntry->fType) { |
| case SkAdvancedTypefaceMetrics::WidthRange::kDefault: |
| defaultWidth = widthEntry->fAdvance[0]; |
| break; |
| case SkAdvancedTypefaceMetrics::WidthRange::kRun: |
| SkASSERT(false); |
| break; |
| case SkAdvancedTypefaceMetrics::WidthRange::kRange: |
| SkASSERT(widthRangeEntry == NULL); |
| widthRangeEntry = widthEntry; |
| break; |
| } |
| } |
| |
| if (!addFontDescriptor(defaultWidth)) |
| return false; |
| |
| insert("Subtype", new SkPDFName("Type1"))->unref(); |
| insert("BaseFont", new SkPDFName(fFontInfo->fFontName))->unref(); |
| |
| addWidthInfoFromRange(defaultWidth, widthRangeEntry); |
| |
| SkRefPtr<SkPDFDict> encoding = new SkPDFDict("Encoding"); |
| encoding->unref(); // SkRefPtr and new both took a reference. |
| insert("Encoding", encoding.get()); |
| |
| SkRefPtr<SkPDFArray> encDiffs = new SkPDFArray; |
| encDiffs->unref(); // SkRefPtr and new both took a reference. |
| encoding->insert("Differences", encDiffs.get()); |
| |
| encDiffs->reserve(fLastGlyphID - fFirstGlyphID + 2); |
| encDiffs->append(new SkPDFInt(1))->unref(); |
| for (int gID = fFirstGlyphID; gID <= fLastGlyphID; gID++) { |
| encDiffs->append( |
| new SkPDFName(fFontInfo->fGlyphNames->get()[gID]))->unref(); |
| } |
| |
| if (fFontInfo->fLastGlyphID <= 255) |
| fFontInfo = NULL; |
| return true; |
| } |
| |
| void SkPDFFont::populateType3Font(int16_t glyphID) { |
| SkPaint paint; |
| paint.setTypeface(fTypeface.get()); |
| paint.setTextSize(1000); |
| SkAutoGlyphCache autoCache(paint, NULL); |
| SkGlyphCache* cache = autoCache.getCache(); |
| // If fLastGlyphID isn't set (because there is not fFontInfo), look it up. |
| if (fLastGlyphID == 0) { |
| fLastGlyphID = cache->getGlyphCount() - 1; |
| } |
| |
| adjustGlyphRangeForSingleByteEncoding(glyphID); |
| |
| insert("Subtype", new SkPDFName("Type3"))->unref(); |
| // Flip about the x-axis and scale by 1/1000. |
| SkMatrix fontMatrix; |
| fontMatrix.setScale(SkScalarInvert(1000), -SkScalarInvert(1000)); |
| insert("FontMatrix", SkPDFUtils::MatrixToArray(fontMatrix))->unref(); |
| |
| SkRefPtr<SkPDFDict> charProcs = new SkPDFDict; |
| charProcs->unref(); // SkRefPtr and new both took a reference. |
| insert("CharProcs", charProcs.get()); |
| |
| SkRefPtr<SkPDFDict> encoding = new SkPDFDict("Encoding"); |
| encoding->unref(); // SkRefPtr and new both took a reference. |
| insert("Encoding", encoding.get()); |
| |
| SkRefPtr<SkPDFArray> encDiffs = new SkPDFArray; |
| encDiffs->unref(); // SkRefPtr and new both took a reference. |
| encoding->insert("Differences", encDiffs.get()); |
| encDiffs->reserve(fLastGlyphID - fFirstGlyphID + 2); |
| encDiffs->append(new SkPDFInt(1))->unref(); |
| |
| SkRefPtr<SkPDFArray> widthArray = new SkPDFArray(); |
| widthArray->unref(); // SkRefPtr and new both took a ref. |
| |
| SkIRect bbox = SkIRect::MakeEmpty(); |
| for (int gID = fFirstGlyphID; gID <= fLastGlyphID; gID++) { |
| SkString characterName; |
| characterName.printf("gid%d", gID); |
| encDiffs->append(new SkPDFName(characterName))->unref(); |
| |
| const SkGlyph glyph = cache->getGlyphIDMetrics(gID); |
| appendWidth(SkFixedToFloat(glyph.fAdvanceX), 1000, widthArray.get()); |
| SkIRect glyphBBox = SkIRect::MakeXYWH(glyph.fLeft, glyph.fTop, |
| glyph.fWidth, glyph.fHeight); |
| bbox.join(glyphBBox); |
| |
| SkString content; |
| setGlyphWidthAndBoundingBox(SkFixedToScalar(glyph.fAdvanceX), glyphBBox, |
| &content); |
| const SkPath* path = cache->findPath(glyph); |
| if (path) { |
| SkPDFUtils::EmitPath(*path, &content); |
| SkPDFUtils::PaintPath(paint.getStyle(), path->getFillType(), |
| &content); |
| } |
| SkRefPtr<SkStream> glyphStream = |
| new SkMemoryStream(content.c_str(), content.size(), true); |
| glyphStream->unref(); // SkRefPtr and new both took a ref. |
| SkRefPtr<SkPDFStream> glyphDescription = |
| new SkPDFStream(glyphStream.get()); |
| // SkRefPtr and new both ref()'d charProcs, pass one. |
| fResources.push(glyphDescription.get()); |
| charProcs->insert(characterName.c_str(), |
| new SkPDFObjRef(glyphDescription.get()))->unref(); |
| } |
| |
| insert("FontBBox", makeFontBBox(bbox, 1000))->unref(); |
| insert("FirstChar", new SkPDFInt(fFirstGlyphID))->unref(); |
| insert("LastChar", new SkPDFInt(fLastGlyphID))->unref(); |
| insert("Widths", widthArray.get()); |
| |
| if (fFontInfo && fFontInfo->fLastGlyphID <= 255) |
| fFontInfo = NULL; |
| } |
| |
| bool SkPDFFont::addFontDescriptor(int16_t defaultWidth) { |
| if (fDescriptor.get() != NULL) { |
| fResources.push(fDescriptor.get()); |
| fDescriptor->ref(); |
| insert("FontDescriptor", new SkPDFObjRef(fDescriptor.get()))->unref(); |
| return true; |
| } |
| |
| fDescriptor = new SkPDFDict("FontDescriptor"); |
| fDescriptor->unref(); // SkRefPtr and new both took a ref. |
| |
| switch (fFontInfo->fType) { |
| case SkAdvancedTypefaceMetrics::kType1_Font: { |
| size_t header, data, trailer; |
| SkRefPtr<SkStream> rawFontData = |
| SkFontHost::OpenStream(SkTypeface::UniqueID(fTypeface.get())); |
| rawFontData->unref(); // SkRefPtr and OpenStream both took a ref. |
| SkStream* fontData = handleType1Stream(rawFontData.get(), &header, |
| &data, &trailer); |
| if (fontData == NULL) |
| return false; |
| SkRefPtr<SkPDFStream> fontStream = new SkPDFStream(fontData); |
| // SkRefPtr and new both ref()'d fontStream, pass one. |
| fResources.push(fontStream.get()); |
| fontStream->insert("Length1", new SkPDFInt(header))->unref(); |
| fontStream->insert("Length2", new SkPDFInt(data))->unref(); |
| fontStream->insert("Length3", new SkPDFInt(trailer))->unref(); |
| fDescriptor->insert("FontFile", |
| new SkPDFObjRef(fontStream.get()))->unref(); |
| break; |
| } |
| case SkAdvancedTypefaceMetrics::kTrueType_Font: { |
| SkRefPtr<SkStream> fontData = |
| SkFontHost::OpenStream(SkTypeface::UniqueID(fTypeface.get())); |
| fontData->unref(); // SkRefPtr and OpenStream both took a ref. |
| SkRefPtr<SkPDFStream> fontStream = new SkPDFStream(fontData.get()); |
| // SkRefPtr and new both ref()'d fontStream, pass one. |
| fResources.push(fontStream.get()); |
| |
| fontStream->insert("Length1", |
| new SkPDFInt(fontData->getLength()))->unref(); |
| fDescriptor->insert("FontFile2", |
| new SkPDFObjRef(fontStream.get()))->unref(); |
| break; |
| } |
| case SkAdvancedTypefaceMetrics::kCFF_Font: |
| case SkAdvancedTypefaceMetrics::kType1CID_Font: { |
| SkRefPtr<SkStream> fontData = |
| SkFontHost::OpenStream(SkTypeface::UniqueID(fTypeface.get())); |
| fontData->unref(); // SkRefPtr and OpenStream both took a ref. |
| SkRefPtr<SkPDFStream> fontStream = new SkPDFStream(fontData.get()); |
| // SkRefPtr and new both ref()'d fontStream, pass one. |
| fResources.push(fontStream.get()); |
| |
| if (fFontInfo->fType == SkAdvancedTypefaceMetrics::kCFF_Font) { |
| fontStream->insert("Subtype", new SkPDFName("Type1C"))->unref(); |
| } else { |
| fontStream->insert("Subtype", |
| new SkPDFName("CIDFontType0c"))->unref(); |
| } |
| fDescriptor->insert("FontFile3", |
| new SkPDFObjRef(fontStream.get()))->unref(); |
| break; |
| } |
| default: |
| SkASSERT(false); |
| } |
| |
| const uint16_t emSize = fFontInfo->fEmSize; |
| fResources.push(fDescriptor.get()); |
| fDescriptor->ref(); |
| insert("FontDescriptor", new SkPDFObjRef(fDescriptor.get()))->unref(); |
| |
| fDescriptor->insert("FontName", new SkPDFName( |
| fFontInfo->fFontName))->unref(); |
| fDescriptor->insert("Flags", new SkPDFInt(fFontInfo->fStyle))->unref(); |
| fDescriptor->insert("Ascent", new SkPDFScalar( |
| scaleFromFontUnits(fFontInfo->fAscent, emSize)))->unref(); |
| fDescriptor->insert("Descent", new SkPDFScalar( |
| scaleFromFontUnits(fFontInfo->fDescent, emSize)))->unref(); |
| fDescriptor->insert("StemV", new SkPDFScalar( |
| scaleFromFontUnits(fFontInfo->fStemV, emSize)))->unref(); |
| fDescriptor->insert("CapHeight", new SkPDFScalar( |
| scaleFromFontUnits(fFontInfo->fCapHeight, emSize)))->unref(); |
| fDescriptor->insert("ItalicAngle", new SkPDFInt( |
| fFontInfo->fItalicAngle))->unref(); |
| fDescriptor->insert("FontBBox", makeFontBBox(fFontInfo->fBBox, |
| fFontInfo->fEmSize))->unref(); |
| |
| if (defaultWidth > 0) { |
| fDescriptor->insert("MissingWidth", new SkPDFScalar( |
| scaleFromFontUnits(defaultWidth, emSize)))->unref(); |
| } |
| return true; |
| } |
| void SkPDFFont::addWidthInfoFromRange( |
| int16_t defaultWidth, |
| const SkAdvancedTypefaceMetrics::WidthRange* widthRangeEntry) { |
| SkRefPtr<SkPDFArray> widthArray = new SkPDFArray(); |
| widthArray->unref(); // SkRefPtr and new both took a ref. |
| int firstChar = 0; |
| if (widthRangeEntry) { |
| const uint16_t emSize = fFontInfo->fEmSize; |
| int startIndex = fFirstGlyphID - widthRangeEntry->fStartId; |
| int endIndex = startIndex + fLastGlyphID - fFirstGlyphID + 1; |
| if (startIndex < 0) |
| startIndex = 0; |
| if (endIndex > widthRangeEntry->fAdvance.count()) |
| endIndex = widthRangeEntry->fAdvance.count(); |
| if (widthRangeEntry->fStartId == 0) { |
| appendWidth(widthRangeEntry->fAdvance[0], emSize, widthArray.get()); |
| } else { |
| firstChar = startIndex + widthRangeEntry->fStartId; |
| } |
| for (int i = startIndex; i < endIndex; i++) |
| appendWidth(widthRangeEntry->fAdvance[i], emSize, widthArray.get()); |
| } else { |
| appendWidth(defaultWidth, 1000, widthArray.get()); |
| } |
| insert("FirstChar", new SkPDFInt(firstChar))->unref(); |
| insert("LastChar", |
| new SkPDFInt(firstChar + widthArray->size() - 1))->unref(); |
| insert("Widths", widthArray.get()); |
| } |
| |
| void SkPDFFont::adjustGlyphRangeForSingleByteEncoding(int16_t glyphID) { |
| // Single byte glyph encoding supports a max of 255 glyphs. |
| fFirstGlyphID = glyphID - (glyphID - 1) % 255; |
| if (fLastGlyphID > fFirstGlyphID + 255 - 1) { |
| fLastGlyphID = fFirstGlyphID + 255 - 1; |
| } |
| } |
| |
| |
| bool SkPDFFont::FontRec::operator==(const SkPDFFont::FontRec& b) const { |
| if (fFontID != b.fFontID) |
| return false; |
| if (fFont != NULL && b.fFont != NULL) { |
| return fFont->fFirstGlyphID == b.fFont->fFirstGlyphID && |
| fFont->fLastGlyphID == b.fFont->fLastGlyphID; |
| } |
| if (fGlyphID == 0 || b.fGlyphID == 0) |
| return true; |
| |
| if (fFont != NULL) { |
| return fFont->fFirstGlyphID <= b.fGlyphID && |
| b.fGlyphID <= fFont->fLastGlyphID; |
| } else if (b.fFont != NULL) { |
| return b.fFont->fFirstGlyphID <= fGlyphID && |
| fGlyphID <= b.fFont->fLastGlyphID; |
| } |
| return fGlyphID == b.fGlyphID; |
| } |
| |
| SkPDFFont::FontRec::FontRec(SkPDFFont* font, uint32_t fontID, uint16_t glyphID) |
| : fFont(font), |
| fFontID(fontID), |
| fGlyphID(glyphID) { |
| } |